[TC] defxx: TURBOchannel support

This is a set of changes to add TURBOchannel support to the defxx driver.  As
at this point the EISA support in the driver has become the only not having
been converted to the driver model, I took the opportunity to convert it as
well.  Plus support for MMIO in addition to PIO operation as TURBOchannel
requires it anyway.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

drivers/net/Kconfig

@@ -2534,7 +2534,7 @@ config RIONET_RX_SIZE
 
 config FDDI
 	bool "FDDI driver support"
-	depends on (PCI || EISA)
+	depends on (PCI || EISA || TC)
 	help
 	  Fiber Distributed Data Interface is a high speed local area network
 	  design; essentially a replacement for high speed Ethernet. FDDI can
@@ -2544,11 +2544,31 @@ config FDDI
 	  will say N.
 
 config DEFXX
-	tristate "Digital DEFEA and DEFPA adapter support"
-	depends on FDDI && (PCI || EISA)
-	help
-	  This is support for the DIGITAL series of EISA (DEFEA) and PCI
-	  (DEFPA) controllers which can connect you to a local FDDI network.
+	tristate "Digital DEFTA/DEFEA/DEFPA adapter support"
+	depends on FDDI && (PCI || EISA || TC)
+	---help---
+	  This is support for the DIGITAL series of TURBOchannel (DEFTA),
+	  EISA (DEFEA) and PCI (DEFPA) controllers which can connect you
+	  to a local FDDI network.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called defxx.  If unsure, say N.
+
+config DEFXX_MMIO
+	bool
+	prompt "Use MMIO instead of PIO" if PCI || EISA
+	depends on DEFXX
+	default n if PCI || EISA
+	default y
+	---help---
+	  This instructs the driver to use EISA or PCI memory-mapped I/O
+	  (MMIO) as appropriate instead of programmed I/O ports (PIO).
+	  Enabling this gives an improvement in processing time in parts
+	  of the driver, but it may cause problems with EISA (DEFEA)
+	  adapters.  TURBOchannel does not have the concept of I/O ports,
+	  so MMIO is always used for these (DEFTA) adapters.
+
+	  If unsure, say N.
 
 config SKFP
 	tristate "SysKonnect FDDI PCI support"

drivers/net/defxx.h

@@ -26,6 +26,7 @@
  *		12-Sep-96	LVS		Removed packet request header pointers.
  *		04 Aug 2003	macro		Converted to the DMA API.
  *		23 Oct 2006	macro		Big-endian host support.
+ *		14 Dec 2006	macro		TURBOchannel support.
  */
 
 #ifndef _DEFXX_H_
@@ -1471,9 +1472,17 @@ typedef union
 
 #endif /* __BIG_ENDIAN */
 
+/* Define TC PDQ CSR offset and length */
+
+#define PI_TC_K_CSR_OFFSET		0x100000
+#define PI_TC_K_CSR_LEN			0x40		/* 64 bytes */
+
 /* Define EISA controller register offsets */
 
-#define PI_ESIC_K_BURST_HOLDOFF		0x040
+#define PI_ESIC_K_CSR_IO_LEN		0x80		/* 128 bytes */
+
+#define PI_DEFEA_K_BURST_HOLDOFF	0x040
+
 #define PI_ESIC_K_SLOT_ID            	0xC80
 #define PI_ESIC_K_SLOT_CNTRL		0xC84
 #define PI_ESIC_K_MEM_ADD_CMP_0     	0xC85
@@ -1488,14 +1497,14 @@ typedef union
 #define PI_ESIC_K_MEM_ADD_LO_CMP_0  	0xC8E
 #define PI_ESIC_K_MEM_ADD_LO_CMP_1  	0xC8F
 #define PI_ESIC_K_MEM_ADD_LO_CMP_2  	0xC90
-#define PI_ESIC_K_IO_CMP_0_0		0xC91
-#define PI_ESIC_K_IO_CMP_0_1		0xC92
-#define PI_ESIC_K_IO_CMP_1_0		0xC93
-#define PI_ESIC_K_IO_CMP_1_1		0xC94
-#define PI_ESIC_K_IO_CMP_2_0		0xC95
-#define PI_ESIC_K_IO_CMP_2_1		0xC96
-#define PI_ESIC_K_IO_CMP_3_0		0xC97
-#define PI_ESIC_K_IO_CMP_3_1		0xC98
+#define PI_ESIC_K_IO_ADD_CMP_0_0	0xC91
+#define PI_ESIC_K_IO_ADD_CMP_0_1	0xC92
+#define PI_ESIC_K_IO_ADD_CMP_1_0	0xC93
+#define PI_ESIC_K_IO_ADD_CMP_1_1	0xC94
+#define PI_ESIC_K_IO_ADD_CMP_2_0	0xC95
+#define PI_ESIC_K_IO_ADD_CMP_2_1	0xC96
+#define PI_ESIC_K_IO_ADD_CMP_3_0	0xC97
+#define PI_ESIC_K_IO_ADD_CMP_3_1	0xC98
 #define PI_ESIC_K_IO_ADD_MASK_0_0    	0xC99
 #define PI_ESIC_K_IO_ADD_MASK_0_1    	0xC9A
 #define PI_ESIC_K_IO_ADD_MASK_1_0    	0xC9B
@@ -1518,11 +1527,16 @@ typedef union
 #define PI_ESIC_K_INPUT_PORT         	0xCAC
 #define PI_ESIC_K_OUTPUT_PORT        	0xCAD
 #define PI_ESIC_K_FUNCTION_CNTRL	0xCAE
-#define PI_ESIC_K_CSR_IO_LEN		PI_ESIC_K_FUNCTION_CNTRL+1	/* always last reg + 1 */
 
-/* Define the value all drivers must write to the function control register. */
+/* Define the bits in the function control register. */
 
-#define PI_ESIC_K_FUNCTION_CNTRL_IO_ENB	0x03
+#define PI_FUNCTION_CNTRL_M_IOCS0	0x01
+#define PI_FUNCTION_CNTRL_M_IOCS1	0x02
+#define PI_FUNCTION_CNTRL_M_IOCS2	0x04
+#define PI_FUNCTION_CNTRL_M_IOCS3	0x08
+#define PI_FUNCTION_CNTRL_M_MEMCS0	0x10
+#define PI_FUNCTION_CNTRL_M_MEMCS1	0x20
+#define PI_FUNCTION_CNTRL_M_DMA		0x80
 
 /* Define the bits in the slot control register. */
 
@@ -1540,6 +1554,10 @@ typedef union
 #define PI_BURST_HOLDOFF_V_RESERVED	1
 #define PI_BURST_HOLDOFF_V_MEM_MAP	0
 
+/* Define the implicit mask of the Memory Address Mask Register.  */
+
+#define PI_MEM_ADD_MASK_M		0x3ff
+
 /*
  * Define the fields in the IO Compare registers.
  * The driver must initialize the slot field with the slot ID shifted by the
@@ -1577,6 +1595,7 @@ typedef union
 #define DEFEA_PROD_ID_1		0x0130A310		/* DEC product 300, rev 1	*/
 #define DEFEA_PROD_ID_2		0x0230A310		/* DEC product 300, rev 2	*/
 #define DEFEA_PROD_ID_3		0x0330A310		/* DEC product 300, rev 3	*/
+#define DEFEA_PROD_ID_4		0x0430A310		/* DEC product 300, rev 4	*/
 
 /**********************************************/
 /* Digital PFI Specification v1.0 Definitions */
@@ -1633,12 +1652,6 @@ typedef union
 #define PFI_STATUS_V_FIFO_EMPTY		 1
 #define PFI_STATUS_V_DMA_IN_PROGRESS 0
 
-#define DFX_MAX_EISA_SLOTS		16			/* maximum number of EISA slots to scan */
-#define DFX_MAX_NUM_BOARDS		8			/* maximum number of adapters supported */
-
-#define DFX_BUS_TYPE_PCI		0			/* type code for DEC FDDIcontroller/PCI */
-#define DFX_BUS_TYPE_EISA		1			/* type code for DEC FDDIcontroller/EISA */
-
 #define DFX_FC_PRH2_PRH1_PRH0		0x54003820	/* Packet Request Header bytes + FC */
 #define DFX_PRH0_BYTE			0x20		/* Packet Request Header byte 0 */
 #define DFX_PRH1_BYTE			0x38		/* Packet Request Header byte 1 */
@@ -1756,10 +1769,11 @@ typedef struct DFX_board_tag
 	/* Store device, bus-specific, and parameter information for this adapter */
 
 	struct net_device		*dev;						/* pointer to device structure */
-	struct net_device		*next;
-	u32				bus_type;					/* bus type (0 == PCI, 1 == EISA) */
-	u16				base_addr;					/* base I/O address (same as dev->base_addr) */
-	struct pci_dev *		pci_dev;
+	union {
+		void __iomem *mem;
+		int port;
+	} base;										/* base address */
+	struct device			*bus_dev;
 	u32				full_duplex_enb;				/* FDDI Full Duplex enable (1 == on, 2 == off) */
 	u32				req_ttrt;					/* requested TTRT value (in 80ns units) */
 	u32				burst_size;					/* adapter burst size (enumerated) */