Merge branch 'tegra/cleanup' into next/dt

Dependency for tegra/dt

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-tegra/Makefile

@@ -18,20 +18,20 @@ obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)			+= pcie.o
 obj-$(CONFIG_USB_SUPPORT)		+= usb_phy.o
 
-obj-${CONFIG_MACH_HARMONY}              += board-harmony.o
-obj-${CONFIG_MACH_HARMONY}              += board-harmony-pinmux.o
-obj-${CONFIG_MACH_HARMONY}              += board-harmony-pcie.o
-obj-${CONFIG_MACH_HARMONY}              += board-harmony-power.o
+obj-$(CONFIG_MACH_HARMONY)              += board-harmony.o
+obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pinmux.o
+obj-$(CONFIG_MACH_HARMONY)              += board-harmony-pcie.o
+obj-$(CONFIG_MACH_HARMONY)              += board-harmony-power.o
 
-obj-${CONFIG_MACH_PAZ00}		+= board-paz00.o
-obj-${CONFIG_MACH_PAZ00}		+= board-paz00-pinmux.o
+obj-$(CONFIG_MACH_PAZ00)		+= board-paz00.o
+obj-$(CONFIG_MACH_PAZ00)		+= board-paz00-pinmux.o
 
-obj-${CONFIG_MACH_SEABOARD}             += board-seaboard.o
-obj-${CONFIG_MACH_SEABOARD}             += board-seaboard-pinmux.o
+obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard.o
+obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard-pinmux.o
 
-obj-${CONFIG_MACH_TEGRA_DT}             += board-dt.o
-obj-${CONFIG_MACH_TEGRA_DT}             += board-harmony-pinmux.o
-obj-${CONFIG_MACH_TEGRA_DT}             += board-seaboard-pinmux.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-dt.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-harmony-pinmux.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-seaboard-pinmux.o
 
-obj-${CONFIG_MACH_TRIMSLICE}            += board-trimslice.o
-obj-${CONFIG_MACH_TRIMSLICE}            += board-trimslice-pinmux.o
+obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice.o
+obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice-pinmux.o

arch/arm/mach-tegra/include/mach/entry-macro.S

@@ -15,7 +15,6 @@
 #include <mach/iomap.h>
 #include <mach/io.h>
 
-#if defined(CONFIG_ARM_GIC)
 #define HAVE_GET_IRQNR_PREAMBLE
 #include <asm/hardware/entry-macro-gic.S>
 
@@ -32,25 +31,3 @@
 
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
-#else
-	/* legacy interrupt controller for AP16 */
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_preamble, base, tmp
-	@ enable imprecise aborts
-	cpsie	a
-	@ EVP base at 0xf010f000
-	mov \base, #0xf0000000
-	orr \base, #0x00100000
-	orr \base, #0x0000f000
-	.endm
-
-	.macro	arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr \irqnr, [\base, #0x20]	@ EVT_IRQ_STS
-	cmp \irqnr, #0x80
-	.endm
-#endif

arch/arm/mach-tegra/irq.c

@@ -28,10 +28,6 @@
 
 #include "board.h"
 
-#define INT_SYS_NR	(INT_GPIO_BASE - INT_PRI_BASE)
-#define INT_SYS_SZ	(INT_SEC_BASE - INT_PRI_BASE)
-#define PPI_NR		((INT_SYS_NR+INT_SYS_SZ-1)/INT_SYS_SZ)
-
 #define ICTLR_CPU_IEP_VFIQ	0x08
 #define ICTLR_CPU_IEP_FIR	0x14
 #define ICTLR_CPU_IEP_FIR_SET	0x18