Merge ../linus/

CREDITS

@@ -611,8 +611,7 @@ S: USA
 N: Randolph Chung
 E: tausq@debian.org
 D: Linux/PA-RISC hacker
-S: Los Altos, CA 94022
-S: USA
+S: Hong Kong
 
 N: Juan Jose Ciarlante
 W: http://juanjox.kernelnotes.org/
@@ -3405,6 +3404,15 @@ S: Chudenicka 8
 S: 10200 Prague 10, Hostivar
 S: Czech Republic
 
+N: Thibaut Varene
+E: T-Bone@parisc-linux.org
+W: http://www.parisc-linux.org/
+P: 1024D/B7D2F063 E67C 0D43 A75E 12A5 BB1C  FA2F 1E32 C3DA B7D2 F063
+D: PA-RISC port minion, PDC and GSCPS2 drivers, debuglocks and other bits
+D: Some bits in an ARM port, S1D13XXX FB driver, random patches here and there
+D: AD1889 sound driver
+S: Paris, France
+
 N: Heikki Vatiainen
 E: hessu@cs.tut.fi
 D: Co-author of Multi-Protocol Over ATM (MPOA), some LANE hacks

Documentation/00-INDEX

@@ -24,6 +24,8 @@ DMA-mapping.txt
 	- info for PCI drivers using DMA portably across all platforms.
 DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
+HOWTO
+	- The process and procedures of how to do Linux kernel development.
 IO-mapping.txt
 	- how to access I/O mapped memory from within device drivers.
 IPMI.txt
@@ -256,6 +258,10 @@ specialix.txt
 	- info on hardware/driver for specialix IO8+ multiport serial card.
 spinlocks.txt
 	- info on using spinlocks to provide exclusive access in kernel.
+stable_api_nonsense.txt
+	- info on why the kernel does not have a stable in-kernel api or abi.
+stable_kernel_rules.txt
+	- rules and procedures for the -stable kernel releases.
 stallion.txt
 	- info on using the Stallion multiport serial driver.
 svga.txt

Documentation/HOWTO

@@ -0,0 +1,618 @@
+HOWTO do Linux kernel development
+---------------------------------
+
+This is the be-all, end-all document on this topic.  It contains
+instructions on how to become a Linux kernel developer and how to learn
+to work with the Linux kernel development community.  It tries to not
+contain anything related to the technical aspects of kernel programming,
+but will help point you in the right direction for that.
+
+If anything in this document becomes out of date, please send in patches
+to the maintainer of this file, who is listed at the bottom of the
+document.
+
+
+Introduction
+------------
+
+So, you want to learn how to become a Linux kernel developer?  Or you
+have been told by your manager, "Go write a Linux driver for this
+device."  This document's goal is to teach you everything you need to
+know to achieve this by describing the process you need to go through,
+and hints on how to work with the community.  It will also try to
+explain some of the reasons why the community works like it does.
+
+The kernel is written mostly in C, with some architecture-dependent
+parts written in assembly. A good understanding of C is required for
+kernel development.  Assembly (any architecture) is not required unless
+you plan to do low-level development for that architecture.  Though they
+are not a good substitute for a solid C education and/or years of
+experience, the following books are good for, if anything, reference:
+ - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
+ - "Practical C Programming" by Steve Oualline [O'Reilly]
+
+The kernel is written using GNU C and the GNU toolchain.  While it
+adheres to the ISO C89 standard, it uses a number of extensions that are
+not featured in the standard.  The kernel is a freestanding C
+environment, with no reliance on the standard C library, so some
+portions of the C standard are not supported.  Arbitrary long long
+divisions and floating point are not allowed.  It can sometimes be
+difficult to understand the assumptions the kernel has on the toolchain
+and the extensions that it uses, and unfortunately there is no
+definitive reference for them.  Please check the gcc info pages (`info
+gcc`) for some information on them.
+
+Please remember that you are trying to learn how to work with the
+existing development community.  It is a diverse group of people, with
+high standards for coding, style and procedure.  These standards have
+been created over time based on what they have found to work best for
+such a large and geographically dispersed team.  Try to learn as much as
+possible about these standards ahead of time, as they are well
+documented; do not expect people to adapt to you or your company's way
+of doing things.
+
+
+Legal Issues
+------------
+
+The Linux kernel source code is released under the GPL.  Please see the
+file, COPYING, in the main directory of the source tree, for details on
+the license.  If you have further questions about the license, please
+contact a lawyer, and do not ask on the Linux kernel mailing list.  The
+people on the mailing lists are not lawyers, and you should not rely on
+their statements on legal matters.
+
+For common questions and answers about the GPL, please see:
+	http://www.gnu.org/licenses/gpl-faq.html
+
+
+Documentation
+------------
+
+The Linux kernel source tree has a large range of documents that are
+invaluable for learning how to interact with the kernel community.  When
+new features are added to the kernel, it is recommended that new
+documentation files are also added which explain how to use the feature.
+When a kernel change causes the interface that the kernel exposes to
+userspace to change, it is recommended that you send the information or
+a patch to the manual pages explaining the change to the manual pages
+maintainer at mtk-manpages@gmx.net.
+
+Here is a list of files that are in the kernel source tree that are
+required reading:
+  README
+    This file gives a short background on the Linux kernel and describes
+    what is necessary to do to configure and build the kernel.  People
+    who are new to the kernel should start here.
+
+  Documentation/Changes
+    This file gives a list of the minimum levels of various software
+    packages that are necessary to build and run the kernel
+    successfully.
+
+  Documentation/CodingStyle
+    This describes the Linux kernel coding style, and some of the
+    rationale behind it. All new code is expected to follow the
+    guidelines in this document. Most maintainers will only accept
+    patches if these rules are followed, and many people will only
+    review code if it is in the proper style.
+
+  Documentation/SubmittingPatches
+  Documentation/SubmittingDrivers
+    These files describe in explicit detail how to successfully create
+    and send a patch, including (but not limited to):
+       - Email contents
+       - Email format
+       - Who to send it to
+    Following these rules will not guarantee success (as all patches are
+    subject to scrutiny for content and style), but not following them
+    will almost always prevent it.
+
+    Other excellent descriptions of how to create patches properly are:
+	"The Perfect Patch"
+		http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+	"Linux kernel patch submission format"
+		http://linux.yyz.us/patch-format.html
+
+  Documentation/stable_api_nonsense.txt
+    This file describes the rationale behind the conscious decision to
+    not have a stable API within the kernel, including things like:
+      - Subsystem shim-layers (for compatibility?)
+      - Driver portability between Operating Systems.
+      - Mitigating rapid change within the kernel source tree (or
+	preventing rapid change)
+    This document is crucial for understanding the Linux development
+    philosophy and is very important for people moving to Linux from
+    development on other Operating Systems.
+
+  Documentation/SecurityBugs
+    If you feel you have found a security problem in the Linux kernel,
+    please follow the steps in this document to help notify the kernel
+    developers, and help solve the issue.
+
+  Documentation/ManagementStyle
+    This document describes how Linux kernel maintainers operate and the
+    shared ethos behind their methodologies.  This is important reading
+    for anyone new to kernel development (or anyone simply curious about
+    it), as it resolves a lot of common misconceptions and confusion
+    about the unique behavior of kernel maintainers.
+
+  Documentation/stable_kernel_rules.txt
+    This file describes the rules on how the stable kernel releases
+    happen, and what to do if you want to get a change into one of these
+    releases.
+
+  Documentation/kernel-docs.txt
+    A list of external documentation that pertains to kernel
+    development.  Please consult this list if you do not find what you
+    are looking for within the in-kernel documentation.
+
+  Documentation/applying-patches.txt
+    A good introduction describing exactly what a patch is and how to
+    apply it to the different development branches of the kernel.
+
+The kernel also has a large number of documents that can be
+automatically generated from the source code itself.  This includes a
+full description of the in-kernel API, and rules on how to handle
+locking properly.  The documents will be created in the
+Documentation/DocBook/ directory and can be generated as PDF,
+Postscript, HTML, and man pages by running:
+	make pdfdocs
+	make psdocs
+	make htmldocs
+	make mandocs
+respectively from the main kernel source directory.
+
+
+Becoming A Kernel Developer
+---------------------------
+
+If you do not know anything about Linux kernel development, you should
+look at the Linux KernelNewbies project:
+	http://kernelnewbies.org
+It consists of a helpful mailing list where you can ask almost any type
+of basic kernel development question (make sure to search the archives
+first, before asking something that has already been answered in the
+past.)  It also has an IRC channel that you can use to ask questions in
+real-time, and a lot of helpful documentation that is useful for
+learning about Linux kernel development.
+
+The website has basic information about code organization, subsystems,
+and current projects (both in-tree and out-of-tree). It also describes
+some basic logistical information, like how to compile a kernel and
+apply a patch.
+
+If you do not know where you want to start, but you want to look for
+some task to start doing to join into the kernel development community,
+go to the Linux Kernel Janitor's project:
+	http://janitor.kernelnewbies.org/
+It is a great place to start.  It describes a list of relatively simple
+problems that need to be cleaned up and fixed within the Linux kernel
+source tree.  Working with the developers in charge of this project, you
+will learn the basics of getting your patch into the Linux kernel tree,
+and possibly be pointed in the direction of what to go work on next, if
+you do not already have an idea.
+
+If you already have a chunk of code that you want to put into the kernel
+tree, but need some help getting it in the proper form, the
+kernel-mentors project was created to help you out with this.  It is a
+mailing list, and can be found at:
+	http://selenic.com/mailman/listinfo/kernel-mentors
+
+Before making any actual modifications to the Linux kernel code, it is
+imperative to understand how the code in question works.  For this
+purpose, nothing is better than reading through it directly (most tricky
+bits are commented well), perhaps even with the help of specialized
+tools.  One such tool that is particularly recommended is the Linux
+Cross-Reference project, which is able to present source code in a
+self-referential, indexed webpage format. An excellent up-to-date
+repository of the kernel code may be found at:
+	http://sosdg.org/~coywolf/lxr/
+
+
+The development process
+-----------------------
+
+Linux kernel development process currently consists of a few different
+main kernel "branches" and lots of different subsystem-specific kernel
+branches.  These different branches are:
+  - main 2.6.x kernel tree
+  - 2.6.x.y -stable kernel tree
+  - 2.6.x -git kernel patches
+  - 2.6.x -mm kernel patches
+  - subsystem specific kernel trees and patches
+
+2.6.x kernel tree
+-----------------
+2.6.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v2.6/ directory.  Its development
+process is as follows:
+  - As soon as a new kernel is released a two weeks window is open,
+    during this period of time maintainers can submit big diffs to
+    Linus, usually the patches that have already been included in the
+    -mm kernel for a few weeks.  The preferred way to submit big changes
+    is using git (the kernel's source management tool, more information
+    can be found at http://git.or.cz/) but plain patches are also just
+    fine.
+  - After two weeks a -rc1 kernel is released it is now possible to push
+    only patches that do not include new features that could affect the
+    stability of the whole kernel.  Please note that a whole new driver
+    (or filesystem) might be accepted after -rc1 because there is no
+    risk of causing regressions with such a change as long as the change
+    is self-contained and does not affect areas outside of the code that
+    is being added.  git can be used to send patches to Linus after -rc1
+    is released, but the patches need to also be sent to a public
+    mailing list for review.
+  - A new -rc is released whenever Linus deems the current git tree to
+    be in a reasonably sane state adequate for testing.  The goal is to
+    release a new -rc kernel every week.
+  - Process continues until the kernel is considered "ready", the
+    process should last around 6 weeks.
+
+It is worth mentioning what Andrew Morton wrote on the linux-kernel
+mailing list about kernel releases:
+	"Nobody knows when a kernel will be released, because it's
+	released according to perceived bug status, not according to a
+	preconceived timeline."
+
+2.6.x.y -stable kernel tree
+---------------------------
+Kernels with 4 digit versions are -stable kernels. They contain
+relatively small and critical fixes for security problems or significant
+regressions discovered in a given 2.6.x kernel.
+
+This is the recommended branch for users who want the most recent stable
+kernel and are not interested in helping test development/experimental
+versions.
+
+If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
+kernel is the current stable kernel.
+
+2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
+released almost every other week.
+
+The file Documentation/stable_kernel_rules.txt in the kernel tree
+documents what kinds of changes are acceptable for the -stable tree, and
+how the release process works.
+
+2.6.x -git patches
+------------------
+These are daily snapshots of Linus' kernel tree which are managed in a
+git repository (hence the name.) These patches are usually released
+daily and represent the current state of Linus' tree.  They are more
+experimental than -rc kernels since they are generated automatically
+without even a cursory glance to see if they are sane.
+
+2.6.x -mm kernel patches
+------------------------
+These are experimental kernel patches released by Andrew Morton.  Andrew
+takes all of the different subsystem kernel trees and patches and mushes
+them together, along with a lot of patches that have been plucked from
+the linux-kernel mailing list.  This tree serves as a proving ground for
+new features and patches.  Once a patch has proved its worth in -mm for
+a while Andrew or the subsystem maintainer pushes it on to Linus for
+inclusion in mainline.
+
+It is heavily encouraged that all new patches get tested in the -mm tree
+before they are sent to Linus for inclusion in the main kernel tree.
+
+These kernels are not appropriate for use on systems that are supposed
+to be stable and they are more risky to run than any of the other
+branches.
+
+If you wish to help out with the kernel development process, please test
+and use these kernel releases and provide feedback to the linux-kernel
+mailing list if you have any problems, and if everything works properly.
+
+In addition to all the other experimental patches, these kernels usually
+also contain any changes in the mainline -git kernels available at the
+time of release.
+
+The -mm kernels are not released on a fixed schedule, but usually a few
+-mm kernels are released in between each -rc kernel (1 to 3 is common).
+
+Subsystem Specific kernel trees and patches
+-------------------------------------------
+A number of the different kernel subsystem developers expose their
+development trees so that others can see what is happening in the
+different areas of the kernel.  These trees are pulled into the -mm
+kernel releases as described above.
+
+Here is a list of some of the different kernel trees available:
+  git trees:
+    - Kbuild development tree, Sam Ravnborg <sam@ravnborg.org>
+	kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+
+    - ACPI development tree, Len Brown <len.brown@intel.com>
+	kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+
+    - Block development tree, Jens Axboe <axboe@suse.de>
+	kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
+
+    - DRM development tree, Dave Airlie <airlied@linux.ie>
+	kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+
+    - ia64 development tree, Tony Luck <tony.luck@intel.com>
+	kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+
+    - ieee1394 development tree, Jody McIntyre <scjody@modernduck.com>
+	kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
+
+    - infiniband, Roland Dreier <rolandd@cisco.com>
+	kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
+
+    - libata, Jeff Garzik <jgarzik@pobox.com>
+	kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
+
+    - network drivers, Jeff Garzik <jgarzik@pobox.com>
+	kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
+
+    - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
+	kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
+
+    - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+	kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+
+  Other git kernel trees can be found listed at http://kernel.org/git
+
+  quilt trees:
+    - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
+	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+
+
+Bug Reporting
+-------------
+
+bugzilla.kernel.org is where the Linux kernel developers track kernel
+bugs.  Users are encouraged to report all bugs that they find in this
+tool.  For details on how to use the kernel bugzilla, please see:
+	http://test.kernel.org/bugzilla/faq.html
+
+The file REPORTING-BUGS in the main kernel source directory has a good
+template for how to report a possible kernel bug, and details what kind
+of information is needed by the kernel developers to help track down the
+problem.
+
+
+Mailing lists
+-------------
+
+As some of the above documents describe, the majority of the core kernel
+developers participate on the Linux Kernel Mailing list.  Details on how
+to subscribe and unsubscribe from the list can be found at:
+	http://vger.kernel.org/vger-lists.html#linux-kernel
+There are archives of the mailing list on the web in many different
+places.  Use a search engine to find these archives.  For example:
+	http://dir.gmane.org/gmane.linux.kernel
+It is highly recommended that you search the archives about the topic
+you want to bring up, before you post it to the list. A lot of things
+already discussed in detail are only recorded at the mailing list
+archives.
+
+Most of the individual kernel subsystems also have their own separate
+mailing list where they do their development efforts.  See the
+MAINTAINERS file for a list of what these lists are for the different
+groups.
+
+Many of the lists are hosted on kernel.org. Information on them can be
+found at:
+	http://vger.kernel.org/vger-lists.html
+
+Please remember to follow good behavioral habits when using the lists.
+Though a bit cheesy, the following URL has some simple guidelines for
+interacting with the list (or any list):
+	http://www.albion.com/netiquette/
+
+If multiple people respond to your mail, the CC: list of recipients may
+get pretty large. Don't remove anybody from the CC: list without a good
+reason, or don't reply only to the list address. Get used to receiving the
+mail twice, one from the sender and the one from the list, and don't try
+to tune that by adding fancy mail-headers, people will not like it.
+
+Remember to keep the context and the attribution of your replies intact,
+keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and
+add your statements between the individual quoted sections instead of
+writing at the top of the mail.
+
+If you add patches to your mail, make sure they are plain readable text
+as stated in Documentation/SubmittingPatches. Kernel developers don't
+want to deal with attachments or compressed patches; they may want
+to comment on individual lines of your patch, which works only that way.
+Make sure you use a mail program that does not mangle spaces and tab
+characters. A good first test is to send the mail to yourself and try
+to apply your own patch by yourself. If that doesn't work, get your
+mail program fixed or change it until it works.
+
+Above all, please remember to show respect to other subscribers.
+
+
+Working with the community
+--------------------------
+
+The goal of the kernel community is to provide the best possible kernel
+there is.  When you submit a patch for acceptance, it will be reviewed
+on its technical merits and those alone.  So, what should you be
+expecting?
+  - criticism
+  - comments
+  - requests for change
+  - requests for justification
+  - silence
+
+Remember, this is part of getting your patch into the kernel.  You have
+to be able to take criticism and comments about your patches, evaluate
+them at a technical level and either rework your patches or provide
+clear and concise reasoning as to why those changes should not be made.
+If there are no responses to your posting, wait a few days and try
+again, sometimes things get lost in the huge volume.
+
+What should you not do?
+  - expect your patch to be accepted without question
+  - become defensive
+  - ignore comments
+  - resubmit the patch without making any of the requested changes
+
+In a community that is looking for the best technical solution possible,
+there will always be differing opinions on how beneficial a patch is.
+You have to be cooperative, and willing to adapt your idea to fit within
+the kernel.  Or at least be willing to prove your idea is worth it.
+Remember, being wrong is acceptable as long as you are willing to work
+toward a solution that is right.
+
+It is normal that the answers to your first patch might simply be a list
+of a dozen things you should correct.  This does _not_ imply that your
+patch will not be accepted, and it is _not_ meant against you
+personally.  Simply correct all issues raised against your patch and
+resend it.
+
+
+Differences between the kernel community and corporate structures
+-----------------------------------------------------------------
+
+The kernel community works differently than most traditional corporate
+development environments.  Here are a list of things that you can try to
+do to try to avoid problems:
+  Good things to say regarding your proposed changes:
+    - "This solves multiple problems."
+    - "This deletes 2000 lines of code."
+    - "Here is a patch that explains what I am trying to describe."
+    - "I tested it on 5 different architectures..."
+    - "Here is a series of small patches that..."
+    - "This increases performance on typical machines..."
+
+  Bad things you should avoid saying:
+    - "We did it this way in AIX/ptx/Solaris, so therefore it must be
+      good..."
+    - "I've being doing this for 20 years, so..."
+    - "This is required for my company to make money"
+    - "This is for our Enterprise product line."
+    - "Here is my 1000 page design document that describes my idea"
+    - "I've been working on this for 6 months..."
+    - "Here's a 5000 line patch that..."
+    - "I rewrote all of the current mess, and here it is..."
+    - "I have a deadline, and this patch needs to be applied now."
+
+Another way the kernel community is different than most traditional
+software engineering work environments is the faceless nature of
+interaction.  One benefit of using email and irc as the primary forms of
+communication is the lack of discrimination based on gender or race.
+The Linux kernel work environment is accepting of women and minorities
+because all you are is an email address.  The international aspect also
+helps to level the playing field because you can't guess gender based on
+a person's name. A man may be named Andrea and a woman may be named Pat.
+Most women who have worked in the Linux kernel and have expressed an
+opinion have had positive experiences.
+
+The language barrier can cause problems for some people who are not
+comfortable with English.  A good grasp of the language can be needed in
+order to get ideas across properly on mailing lists, so it is
+recommended that you check your emails to make sure they make sense in
+English before sending them.
+
+
+Break up your changes
+---------------------
+
+The Linux kernel community does not gladly accept large chunks of code
+dropped on it all at once.  The changes need to be properly introduced,
+discussed, and broken up into tiny, individual portions.  This is almost
+the exact opposite of what companies are used to doing.  Your proposal
+should also be introduced very early in the development process, so that
+you can receive feedback on what you are doing.  It also lets the
+community feel that you are working with them, and not simply using them
+as a dumping ground for your feature.  However, don't send 50 emails at
+one time to a mailing list, your patch series should be smaller than
+that almost all of the time.
+
+The reasons for breaking things up are the following:
+
+1) Small patches increase the likelihood that your patches will be
+   applied, since they don't take much time or effort to verify for
+   correctness.  A 5 line patch can be applied by a maintainer with
+   barely a second glance. However, a 500 line patch may take hours to
+   review for correctness (the time it takes is exponentially
+   proportional to the size of the patch, or something).
+
+   Small patches also make it very easy to debug when something goes
+   wrong.  It's much easier to back out patches one by one than it is
+   to dissect a very large patch after it's been applied (and broken
+   something).
+
+2) It's important not only to send small patches, but also to rewrite
+   and simplify (or simply re-order) patches before submitting them.
+
+Here is an analogy from kernel developer Al Viro:
+	"Think of a teacher grading homework from a math student.  The
+	teacher does not want to see the student's trials and errors
+	before they came up with the solution. They want to see the
+	cleanest, most elegant answer.  A good student knows this, and
+	would never submit her intermediate work before the final
+	solution."
+
+	The same is true of kernel development. The maintainers and
+	reviewers do not want to see the thought process behind the
+	solution to the problem one is solving. They want to see a
+	simple and elegant solution."
+
+It may be challenging to keep the balance between presenting an elegant
+solution and working together with the community and discussing your
+unfinished work. Therefore it is good to get early in the process to
+get feedback to improve your work, but also keep your changes in small
+chunks that they may get already accepted, even when your whole task is
+not ready for inclusion now.
+
+Also realize that it is not acceptable to send patches for inclusion
+that are unfinished and will be "fixed up later."
+
+
+Justify your change
+-------------------
+
+Along with breaking up your patches, it is very important for you to let
+the Linux community know why they should add this change.  New features
+must be justified as being needed and useful.
+
+
+Document your change
+--------------------
+
+When sending in your patches, pay special attention to what you say in
+the text in your email.  This information will become the ChangeLog
+information for the patch, and will be preserved for everyone to see for
+all time.  It should describe the patch completely, containing:
+  - why the change is necessary
+  - the overall design approach in the patch
+  - implementation details
+  - testing results
+
+For more details on what this should all look like, please see the
+ChangeLog section of the document:
+  "The Perfect Patch"
+      http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+
+
+
+
+All of these things are sometimes very hard to do. It can take years to
+perfect these practices (if at all). It's a continuous process of
+improvement that requires a lot of patience and determination. But
+don't give up, it's possible. Many have done it before, and each had to
+start exactly where you are now.
+
+
+
+
+----------
+Thanks to Paolo Ciarrocchi who allowed the "Development Process" section
+to be based on text he had written, and to Randy Dunlap and Gerrit
+Huizenga for some of the list of things you should and should not say.
+Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
+Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi
+Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop,
+David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for
+their review, comments, and contributions.  Without their help, this
+document would not have been possible.
+
+
+
+Maintainer: Greg Kroah-Hartman <greg@kroah.com>

Documentation/arm/memory.txt

@@ -1,7 +1,7 @@
 		Kernel Memory Layout on ARM Linux
 
 		Russell King <rmk@arm.linux.org.uk>
-			May 21, 2004 (2.6.6)
+		     November 17, 2005 (2.6.15)
 
 This document describes the virtual memory layout which the Linux
 kernel uses for ARM processors.  It indicates which regions are
@@ -37,6 +37,8 @@ ff000000	ffbfffff	Reserved for future expansion of DMA
 				mapping region.
 
 VMALLOC_END	feffffff	Free for platform use, recommended.
+				VMALLOC_END must be aligned to a 2MB
+				boundary.
 
 VMALLOC_START	VMALLOC_END-1	vmalloc() / ioremap() space.
 				Memory returned by vmalloc/ioremap will

Documentation/devices.txt

@@ -2903,14 +2903,14 @@ Your cooperation is appreciated.
 		196 = /dev/dvb/adapter3/video0    first video decoder of fourth card
 
 
-216 char	USB BlueTooth devices
-		  0 = /dev/ttyUB0		First USB BlueTooth device
-		  1 = /dev/ttyUB1		Second USB BlueTooth device
+216 char	Bluetooth RFCOMM TTY devices
+		  0 = /dev/rfcomm0		First Bluetooth RFCOMM TTY device
+		  1 = /dev/rfcomm1		Second Bluetooth RFCOMM TTY device
 		    ...
 
-217 char	USB BlueTooth devices (alternate devices)
-		  0 = /dev/cuub0		Callout device for ttyUB0
-		  1 = /dev/cuub1		Callout device for ttyUB1
+217 char	Bluetooth RFCOMM TTY devices (alternate devices)
+		  0 = /dev/curf0		Callout device for rfcomm0
+		  1 = /dev/curf1		Callout device for rfcomm1
 		    ...
 
 218 char	The Logical Company bus Unibus/Qbus adapters

Documentation/feature-removal-schedule.txt

@@ -149,3 +149,13 @@ Files:	drivers/md/md.c
 Why:	Not reliable by design - can fail when most needed.
 	Alternatives exist
 Who:	NeilBrown <neilb@suse.de>
+
+---------------------------
+
+What:	au1x00_uart driver
+When:	January 2006
+Why:	The 8250 serial driver now has the ability to deal with the differences
+	between the standard 8250 family of UARTs and their slightly strange
+	brother on Alchemy SOCs.  The loss of features is not considered an
+	issue.
+Who:	Ralf Baechle <ralf@linux-mips.org>

Documentation/usb/bluetooth.txt

@@ -1,44 +0,0 @@
-INTRODUCTION
-
-  The USB Bluetooth driver supports any USB Bluetooth device.
-  It currently works well with the Linux USB Bluetooth stack from Axis 
-  (available at http://developer.axis.com/software/bluetooth/ ) and 
-  has been rumored to work with other Linux USB Bluetooth stacks.
-
-
-CONFIGURATION
-
-  Currently the driver can handle up to 256 different USB Bluetooth 
-  devices at once. 
-
-  If you are not using devfs:
-    The major number that the driver uses is 216 so to use the driver,
-    create the following nodes:
-	mknod /dev/ttyUB0 c 216 0
-	mknod /dev/ttyUB1 c 216 1
-	mknod /dev/ttyUB2 c 216 2
-	mknod /dev/ttyUB3 c 216 3
-		.
-		.
-		.
-	mknod /dev/ttyUB254 c 216 254
-	mknod /dev/ttyUB255 c 216 255
-
-  If you are using devfs:
-    The devices supported by this driver will show up as
-    /dev/usb/ttub/{0,1,...}
-
-  When the device is connected and recognized by the driver, the driver
-  will print to the system log, which node the device has been bound to.
-
-
-CONTACT:
-
-  If anyone has any problems using this driver, please contact me, or 
-  join the Linux-USB mailing list (information on joining the mailing 
-  list, as well as a link to its searchable archive is at 
-  http://www.linux-usb.org/ )
-
-
-Greg Kroah-Hartman
-greg@kroah.com

MAINTAINERS

@@ -58,6 +58,7 @@ P: Person
 M: Mail patches to
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
+T: SCM tree type and URL.  Type is one of: git, hg, quilt.
 S: Status, one of the following:
 
 	Supported:	Someone is actually paid to look after this.
@@ -183,6 +184,7 @@ P:	Len Brown
 M:	len.brown@intel.com
 L:	acpi-devel@lists.sourceforge.net
 W:	http://acpi.sourceforge.net/
+T:	git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
 S:	Maintained
 
 AD1816 SOUND DRIVER
@@ -418,6 +420,7 @@ BLOCK LAYER
 P:	Jens Axboe
 M:	axboe@suse.de
 L:	linux-kernel@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
 S:	Maintained
 
 BLUETOOTH SUBSYSTEM
@@ -803,12 +806,14 @@ DRIVER CORE, KOBJECTS, AND SYSFS
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
 L:	linux-kernel@vger.kernel.org
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 
 DRM DRIVERS
 P:	David Airlie
 M:	airlied@linux.ie
 L:	dri-devel@lists.sourceforge.net
+T:	git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 
 DSCC4 DRIVER
@@ -1113,6 +1118,7 @@ P:	Jean Delvare
 M:	khali@linux-fr.org
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.nu/
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Maintained
 
 I2O
@@ -1145,6 +1151,7 @@ P:	Tony Luck
 M:	tony.luck@intel.com
 L:	linux-ia64@vger.kernel.org
 W:	http://www.ia64-linux.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
 S:	Maintained
 
 SN-IA64 (Itanium) SUB-PLATFORM
@@ -1212,6 +1219,7 @@ P:	Jody McIntyre
 M:	scjody@steamballoon.com
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
 S:	Maintained
 
 IEEE 1394 OHCI DRIVER
@@ -1263,6 +1271,7 @@ P:	Hal Rosenstock
 M:	halr@voltaire.com
 L:	openib-general@openib.org
 W:	http://www.openib.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
 S:	Supported
 
 INPUT (KEYBOARD, MOUSE, JOYSTICK) DRIVERS
@@ -1436,6 +1445,7 @@ P:	Kai Germaschewski
 M:	kai@germaschewski.name
 P:	Sam Ravnborg
 M:	sam@ravnborg.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
 S:	Maintained 
 
 KERNEL JANITORS
@@ -1782,6 +1792,7 @@ M:	akpm@osdl.org
 P:	Jeff Garzik
 M:	jgarzik@pobox.com
 L:	netdev@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
 S:	Maintained
 
 NETWORKING [GENERAL]
@@ -1959,6 +1970,7 @@ P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
 L:	linux-kernel@vger.kernel.org
 L:	linux-pci@atrey.karlin.mff.cuni.cz
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 
 PCI HOTPLUG CORE
@@ -1980,6 +1992,7 @@ S:	Maintained
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	http://lists.infradead.org/mailman/listinfo/linux-pcmcia
+T:	git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 S:	Maintained
 
 PCNET32 NETWORK DRIVER
@@ -2189,6 +2202,7 @@ SCSI SUBSYSTEM
 P:	James E.J. Bottomley
 M:	James.Bottomley@SteelEye.com
 L:	linux-scsi@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 S:	Maintained
 
 SCSI TAPE DRIVER
@@ -2228,6 +2242,7 @@ SERIAL ATA (SATA) SUBSYSTEM:
 P:	Jeff Garzik
 M:	jgarzik@pobox.com
 L:	linux-ide@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:	Supported
 
 SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
@@ -2749,6 +2764,7 @@ M:	gregkh@suse.de
 L:	linux-usb-users@lists.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
 W:	http://www.linux-usb.org
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 
 USB UHCI DRIVER
@@ -2891,6 +2907,11 @@ M:	zaga@fly.cc.fer.hr
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+WISTRON LAPTOP BUTTON DRIVER
+P:	Miloslav Trmac
+M:	mitr@volny.cz
+S:	Maintained
+
 WL3501 WIRELESS PCMCIA CARD DRIVER
 P:	Arnaldo Carvalho de Melo
 M:	acme@conectiva.com.br

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 15
-EXTRAVERSION =-rc1
+EXTRAVERSION =-rc2
 NAME=Affluent Albatross
 
 # *DOCUMENTATION*

arch/arm/boot/compressed/head.S

@@ -19,38 +19,28 @@
  */
 #ifdef DEBUG
 
-#include <asm/arch/debug-macro.S>
-
 #if defined(CONFIG_DEBUG_ICEDCC)
 		.macro	loadsp, rb
 		.endm
-		.macro writeb, ch, rb
+		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c1, 0
 		.endm
 #else
+
+#include <asm/arch/debug-macro.S>
+
 		.macro	writeb,	ch, rb
 		senduart \ch, \rb
 		.endm
 
-#if defined(CONFIG_FOOTBRIDGE) || \
-    defined(CONFIG_ARCH_RPC) || \
-    defined(CONFIG_ARCH_INTEGRATOR) || \
-    defined(CONFIG_ARCH_PXA) || \
-    defined(CONFIG_ARCH_IXP4XX) || \
-    defined(CONFIG_ARCH_IXP2000) || \
-    defined(CONFIG_ARCH_LH7A40X) || \
-    defined(CONFIG_ARCH_OMAP)
-		.macro	loadsp,	rb
-		addruart \rb
-		.endm
-#elif defined(CONFIG_ARCH_SA1100)
+#if defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb
 		mov	\rb, #0x80000000	@ physical base address
-#  if defined(CONFIG_DEBUG_LL_SER3)
+#ifdef CONFIG_DEBUG_LL_SER3
 		add	\rb, \rb, #0x00050000	@ Ser3
-#  else
+#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#  endif
+#endif
 		.endm
 #elif defined(CONFIG_ARCH_IOP331)
 		.macro loadsp, rb
@@ -64,7 +54,9 @@
 		add	\rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
 		.endm
 #else
-#error no serial architecture defined
+		.macro	loadsp,	rb
+		addruart \rb
+		.endm
 #endif
 #endif
 #endif

arch/arm/common/sa1111.c

@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/sizes.h>
 
 #include <asm/hardware/sa1111.h>
 
@@ -132,6 +133,17 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
+void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+	unsigned int sz = SZ_1M >> PAGE_SHIFT;
+
+	if (node != 0)
+		sz = 0;
+
+	size[1] = size[0] - sz;
+	size[0] = sz;
+}
+
 /*
  * SA1111 interrupt support.  Since clearing an IRQ while there are
  * active IRQs causes the interrupt output to pulse, the upper levels

arch/arm/configs/s3c2410_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-git8
-# Thu Sep  8 19:24:02 2005
+# Linux kernel version: 2.6.15-rc1
+# Sun Nov 13 17:41:24 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -61,6 +61,23 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # System Type
 #
@@ -83,6 +100,7 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
@@ -108,6 +126,7 @@ CONFIG_CPU_S3C2440=y
 # S3C2410 Boot
 #
 # CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
 
 #
 # S3C2410 Setup
@@ -142,6 +161,7 @@ CONFIG_CPU_TLB_V4WBI=y
 #
 # Bus support
 #
+CONFIG_ISA=y
 CONFIG_ISA_DMA_API=y
 
 #
@@ -152,7 +172,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -163,6 +182,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -253,6 +273,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -260,7 +284,6 @@ CONFIG_TCP_CONG_BIC=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -300,6 +323,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -335,7 +359,6 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_IMPA7 is not set
 CONFIG_MTD_BAST=y
 CONFIG_MTD_BAST_MAXSIZE=4
@@ -369,6 +392,11 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -381,10 +409,12 @@ CONFIG_PARPORT_1284=y
 #
 # Plug and Play support
 #
+# CONFIG_PNP is not set
 
 #
 # Block devices
 #
+# CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
@@ -395,14 +425,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -428,6 +450,7 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
 CONFIG_IDE_GENERIC=y
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDE_BAST=y
+# CONFIG_IDE_CHIPSETS is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -466,6 +489,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
 #
 # PHY device support
 #
@@ -475,9 +503,19 @@ CONFIG_NETDEVICES=y
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-CONFIG_DM9000=m
+CONFIG_DM9000=y
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -490,6 +528,7 @@ CONFIG_DM9000=m
 #
 # Token Ring devices
 #
+# CONFIG_TR is not set
 
 #
 # Wireless LAN (non-hamradio)
@@ -542,6 +581,9 @@ CONFIG_KEYBOARD_ATKBD=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -568,6 +610,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
 # CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
@@ -590,6 +633,10 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
 # CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
 
 #
 # Non-8250 serial port support
@@ -622,6 +669,13 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_S3C2410_WATCHDOG=y
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
 CONFIG_S3C2410_RTC=y
@@ -636,6 +690,7 @@ CONFIG_S3C2410_RTC=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -653,6 +708,7 @@ CONFIG_I2C_ALGOBIT=m
 #
 # I2C Hardware Bus support
 #
+# CONFIG_I2C_ELEKTOR is not set
 CONFIG_I2C_ISA=m
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -671,6 +727,7 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -737,22 +794,28 @@ CONFIG_SENSORS_LM85=m
 # Graphics support
 #
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S3C2410=y
+# CONFIG_FB_S3C2410_DEBUG is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
 
 #
 # Logo configuration
@@ -772,6 +835,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -798,10 +865,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
@@ -810,6 +873,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -854,6 +918,7 @@ CONFIG_JFFS_FS_VERBOSE=0
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -884,6 +949,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -959,7 +1025,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
@@ -970,7 +1036,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 # CONFIG_DEBUG_ERRORS is not set
@@ -998,6 +1066,7 @@ CONFIG_DEBUG_S3C2410_UART=0
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y

arch/arm/kernel/armksyms.c

@@ -120,7 +120,6 @@ EXPORT_SYMBOL(__arch_strncpy_from_user);
 EXPORT_SYMBOL(__get_user_1);
 EXPORT_SYMBOL(__get_user_2);
 EXPORT_SYMBOL(__get_user_4);
-EXPORT_SYMBOL(__get_user_8);
 
 EXPORT_SYMBOL(__put_user_1);
 EXPORT_SYMBOL(__put_user_2);

arch/arm/kernel/entry-common.S

@@ -48,8 +48,7 @@ work_pending:
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
 	bl	do_notify_resume
-	disable_irq				@ disable interrupts
-	b	no_work_pending
+	b	ret_slow_syscall		@ Check work again
 
 work_resched:
 	bl	schedule

arch/arm/kernel/signal.c

@@ -595,23 +595,22 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	 */
 	ret |= !valid_user_regs(regs);
 
-	/*
-	 * Block the signal if we were unsuccessful.
-	 */
 	if (ret != 0) {
-		spin_lock_irq(&tsk->sighand->siglock);
-		sigorsets(&tsk->blocked, &tsk->blocked,
-			  &ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&tsk->blocked, sig);
-		recalc_sigpending();
-		spin_unlock_irq(&tsk->sighand->siglock);
+		force_sigsegv(sig, tsk);
+		return;
 	}
 
-	if (ret == 0)
-		return;
+	/*
+	 * Block the signal if we were successful.
+	 */
+	spin_lock_irq(&tsk->sighand->siglock);
+	sigorsets(&tsk->blocked, &tsk->blocked,
+		  &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&tsk->blocked, sig);
+	recalc_sigpending();
+	spin_unlock_irq(&tsk->sighand->siglock);
 
-	force_sigsegv(sig, tsk);
 }
 
 /*

arch/arm/kernel/vmlinux.lds.S

@@ -172,6 +172,10 @@ SECTIONS
 	.comment 0 : { *(.comment) }
 }
 
-/* those must never be empty */
+/*
+ * These must never be empty
+ * If you have to comment these two assert statements out, your
+ * binutils is too old (for other reasons as well)
+ */
 ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
 ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")

arch/arm/lib/getuser.S

@@ -54,15 +54,6 @@ __get_user_4:
 	mov	r0, #0
 	mov	pc, lr
 
-	.global	__get_user_8
-__get_user_8:
-5:	ldrt	r2, [r0], #4
-6:	ldrt	r3, [r0]
-	mov	r0, #0
-	mov	pc, lr
-
-__get_user_bad_8:
-	mov	r3, #0
 __get_user_bad:
 	mov	r2, #0
 	mov	r0, #-EFAULT
@@ -73,6 +64,4 @@ __get_user_bad:
 	.long	2b, __get_user_bad
 	.long	3b, __get_user_bad
 	.long	4b, __get_user_bad
-	.long	5b, __get_user_bad_8
-	.long	6b, __get_user_bad_8
 .previous

arch/arm/mach-pxa/corgi_lcd.c

@@ -22,7 +22,7 @@
 #include <linux/string.h>
 #include <asm/arch/akita.h>
 #include <asm/arch/corgi.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/spitz.h>

arch/arm/mach-realview/core.h

@@ -26,8 +26,6 @@
 #include <asm/leds.h>
 #include <asm/io.h>
 
-#define __io_address(n)		__io(IO_ADDRESS(n))
-
 extern struct sys_timer realview_timer;
 
 #define AMBA_DEVICE(name,busid,base,plat)			\

arch/arm/mach-realview/localtimer.c

@@ -21,8 +21,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include "core.h"
-
 #define TWD_BASE(cpu)	(__io_address(REALVIEW_TWD_BASE) + \
 			 ((cpu) * REALVIEW_TWD_SIZE))
 

arch/arm/mach-realview/platsmp.c

@@ -17,8 +17,7 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/arm_scu.h>
 #include <asm/hardware.h>
-
-#include "core.h"
+#include <asm/io.h>
 
 extern void realview_secondary_startup(void);
 

arch/arm/mach-s3c2410/mach-bast.c

@@ -203,7 +203,7 @@ static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
 		.name		= "pclk",
 		.divisor	= 1,
 		.min_baud	= 0,
-		.max_baud	= 0.
+		.max_baud	= 0,
 	}
 };
 
@@ -216,7 +216,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks)
+		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	},
 	[1] = {
 		.hwport	     = 1,
@@ -225,7 +225,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks)
+		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	},
 	/* port 2 is not actually used */
 	[2] = {
@@ -235,7 +235,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] = {
 		.ulcon	     = ULCON,
 		.ufcon	     = UFCON,
 		.clocks	     = bast_serial_clocks,
-		.clocks_size = ARRAY_SIZE(bast_serial_clocks)
+		.clocks_size = ARRAY_SIZE(bast_serial_clocks),
 	}
 };
 
@@ -268,7 +268,7 @@ static struct mtd_partition bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
-		.offset	= 0
+		.offset	= 0,
 	},
 	[1] = {
 		.name	= "/boot",
@@ -296,28 +296,28 @@ static struct s3c2410_nand_set bast_nand_sets[] = {
 		.nr_chips	= 1,
 		.nr_map		= smartmedia_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	},
 	[1] = {
 		.name		= "chip0",
 		.nr_chips	= 1,
 		.nr_map		= chip0_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	},
 	[2] = {
 		.name		= "chip1",
 		.nr_chips	= 1,
 		.nr_map		= chip1_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	},
 	[3] = {
 		.name		= "chip2",
 		.nr_chips	= 1,
 		.nr_map		= chip2_map,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
-		.partitions	= bast_default_nand_part
+		.partitions	= bast_default_nand_part,
 	}
 };
 
@@ -355,17 +355,17 @@ static struct resource bast_dm9k_resource[] = {
 	[0] = {
 		.start = S3C2410_CS5 + BAST_PA_DM9000,
 		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 3,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
 		.start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40,
 		.end   = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_MEM,
 	},
 	[2] = {
 		.start = IRQ_DM9000,
 		.end   = IRQ_DM9000,
-		.flags = IORESOURCE_IRQ
+		.flags = IORESOURCE_IRQ,
 	}
 
 };
@@ -375,7 +375,7 @@ static struct resource bast_dm9k_resource[] = {
 */
 
 static struct dm9000_plat_data bast_dm9k_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY
+	.flags		= DM9000_PLATF_16BITONLY,
 };
 
 static struct platform_device bast_device_dm9k = {
@@ -492,7 +492,7 @@ static struct s3c24xx_board bast_board __initdata = {
 	.devices       = bast_devices,
 	.devices_count = ARRAY_SIZE(bast_devices),
 	.clocks	       = bast_clocks,
-	.clocks_count  = ARRAY_SIZE(bast_clocks)
+	.clocks_count  = ARRAY_SIZE(bast_clocks),
 };
 
 static void __init bast_map_io(void)

arch/arm/mm/Makefile

@@ -51,4 +51,4 @@ obj-$(CONFIG_CPU_ARM1026)	+= proc-arm1026.o
 obj-$(CONFIG_CPU_SA110)		+= proc-sa110.o
 obj-$(CONFIG_CPU_SA1100)	+= proc-sa1100.o
 obj-$(CONFIG_CPU_XSCALE)	+= proc-xscale.o
-obj-$(CONFIG_CPU_V6)		+= proc-v6.o blockops.o
+obj-$(CONFIG_CPU_V6)		+= proc-v6.o

arch/arm/mm/blockops.c

@@ -1,185 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-
-#include <asm/memory.h>
-#include <asm/ptrace.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-extern struct cpu_cache_fns blk_cache_fns;
-
-#define HARVARD_CACHE
-
-/*
- *	blk_flush_kern_dcache_page(kaddr)
- *
- *	Ensure that the data held in the page kaddr is written back
- *	to the page in question.
- *
- *	- kaddr   - kernel address (guaranteed to be page aligned)
- */
-static void __attribute__((naked))
-blk_flush_kern_dcache_page(void *kaddr)
-{
-	asm(
-	"add	r1, r0, %0							\n\
-	sub	r1, r1, %1							\n\
-1:	.word	0xec401f0e	@ mcrr	p15, 0, r0, r1, c14, 0	@ blocking	\n\
-	mov	r0, #0								\n\
-	mcr	p15, 0, r0, c7, c5, 0						\n\
-	mcr	p15, 0, r0, c7, c10, 4						\n\
-	mov	pc, lr"
-	:
-	: "I" (PAGE_SIZE), "I" (L1_CACHE_BYTES));
-}
-
-/*
- *	blk_dma_inv_range(start,end)
- *
- *	Invalidate the data cache within the specified region; we will
- *	be performing a DMA operation in this region and we want to
- *	purge old data in the cache.
- *
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-static void __attribute__((naked))
-blk_dma_inv_range_unified(unsigned long start, unsigned long end)
-{
-	asm(
-	"tst	r0, %0								\n\
-	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line		\n\
-	tst	r1, %0								\n\
-	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line\n\
-	.word	0xec401f06	@ mcrr	p15, 0, r1, r0, c6, 0	@ blocking	\n\
-	mov	r0, #0								\n\
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer		\n\
-	mov	pc, lr"
-	:
-	: "I" (L1_CACHE_BYTES - 1));
-}
-
-static void __attribute__((naked))
-blk_dma_inv_range_harvard(unsigned long start, unsigned long end)
-{
-	asm(
-	"tst	r0, %0								\n\
-	mcrne	p15, 0, r0, c7, c10, 1		@ clean D line			\n\
-	tst	r1, %0								\n\
-	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line	\n\
-	.word	0xec401f06	@ mcrr	p15, 0, r1, r0, c6, 0	@ blocking	\n\
-	mov	r0, #0								\n\
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer		\n\
-	mov	pc, lr"
-	:
-	: "I" (L1_CACHE_BYTES - 1));
-}
-
-/*
- *	blk_dma_clean_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-static void __attribute__((naked))
-blk_dma_clean_range(unsigned long start, unsigned long end)
-{
-	asm(
-	".word	0xec401f0c	@ mcrr	p15, 0, r1, r0, c12, 0	@ blocking	\n\
-	mov	r0, #0								\n\
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer		\n\
-	mov	pc, lr");
-}
-
-/*
- *	blk_dma_flush_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-static void __attribute__((naked))
-blk_dma_flush_range(unsigned long start, unsigned long end)
-{
-	asm(
-	".word	0xec401f0e	@ mcrr	p15, 0, r1, r0, c14, 0	@ blocking	\n\
-	mov	pc, lr");
-}
-
-static int blockops_trap(struct pt_regs *regs, unsigned int instr)
-{
-	regs->ARM_r4 |= regs->ARM_r2;
-	regs->ARM_pc += 4;
-	return 0;
-}
-
-static char *func[] = {
-	"Prefetch data range",
-	"Clean+Invalidate data range",
-	"Clean data range",
-	"Invalidate data range",
-	"Invalidate instr range"
-};
-
-static struct undef_hook blockops_hook __initdata = {
-	.instr_mask	= 0x0fffffd0,
-	.instr_val	= 0x0c401f00,
-	.cpsr_mask	= PSR_T_BIT,
-	.cpsr_val	= 0,
-	.fn		= blockops_trap,
-};
-
-static int __init blockops_check(void)
-{
-	register unsigned int err asm("r4") = 0;
-	unsigned int err_pos = 1;
-	unsigned int cache_type;
-	int i;
-
-	asm("mrc p15, 0, %0, c0, c0, 1" : "=r" (cache_type));
-
-	printk("Checking V6 block cache operations:\n");
-	register_undef_hook(&blockops_hook);
-
-	__asm__ ("mov	r0, %0\n\t"
-		"mov	r1, %1\n\t"
-		"mov	r2, #1\n\t"
-		".word	0xec401f2c @ mcrr p15, 0, r1, r0, c12, 2\n\t"
-		"mov	r2, #2\n\t"
-		".word	0xec401f0e @ mcrr p15, 0, r1, r0, c14, 0\n\t"
-		"mov	r2, #4\n\t"
-		".word	0xec401f0c @ mcrr p15, 0, r1, r0, c12, 0\n\t"
-		"mov	r2, #8\n\t"
-		".word	0xec401f06 @ mcrr p15, 0, r1, r0, c6, 0\n\t"
-		"mov	r2, #16\n\t"
-		".word	0xec401f05 @ mcrr p15, 0, r1, r0, c5, 0\n\t"
-		:
-		: "r" (PAGE_OFFSET), "r" (PAGE_OFFSET + 128)
-		: "r0", "r1", "r2");
-
-	unregister_undef_hook(&blockops_hook);
-
-	for (i = 0; i < ARRAY_SIZE(func); i++, err_pos <<= 1)
-		printk("%30s: %ssupported\n", func[i], err & err_pos ? "not " : "");
-
-	if ((err & 8) == 0) {
-		printk(" --> Using %s block cache invalidate\n",
-			cache_type & (1 << 24) ? "harvard" : "unified");
-		if (cache_type & (1 << 24))
-			cpu_cache.dma_inv_range = blk_dma_inv_range_harvard;
-		else
-			cpu_cache.dma_inv_range = blk_dma_inv_range_unified;
-	}
-	if ((err & 4) == 0) {
-		printk(" --> Using block cache clean\n");
-		cpu_cache.dma_clean_range        = blk_dma_clean_range;
-	}
-	if ((err & 2) == 0) {
-		printk(" --> Using block cache clean+invalidate\n");
-		cpu_cache.dma_flush_range        = blk_dma_flush_range;
-		cpu_cache.flush_kern_dcache_page = blk_flush_kern_dcache_page;
-	}
-
-	return 0;
-}
-
-__initcall(blockops_check);

arch/arm/mm/init.c

@@ -420,7 +420,8 @@ static void __init bootmem_init(struct meminfo *mi)
  * Set up device the mappings.  Since we clear out the page tables for all
  * mappings above VMALLOC_END, we will remove any debug device mappings.
  * This means you have to be careful how you debug this function, or any
- * called function.  (Do it by code inspection!)
+ * called function.  This means you can't use any function or debugging
+ * method which may touch any device, otherwise the kernel _will_ crash.
  */
 static void __init devicemaps_init(struct machine_desc *mdesc)
 {
@@ -428,6 +429,12 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	unsigned long addr;
 	void *vectors;
 
+	/*
+	 * Allocate the vector page early.
+	 */
+	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+	BUG_ON(!vectors);
+
 	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
 
@@ -461,12 +468,6 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	create_mapping(&map);
 #endif
 
-	flush_cache_all();
-	local_flush_tlb_all();
-
-	vectors = alloc_bootmem_low_pages(PAGE_SIZE);
-	BUG_ON(!vectors);
-
 	/*
 	 * Create a mapping for the machine vectors at the high-vectors
 	 * location (0xffff0000).  If we aren't using high-vectors, also
@@ -491,12 +492,13 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 		mdesc->map_io();
 
 	/*
-	 * Finally flush the tlb again - this ensures that we're in a
-	 * consistent state wrt the writebuffer if the writebuffer needs
-	 * draining.  After this point, we can start to touch devices
-	 * again.
+	 * Finally flush the caches and tlb to ensure that we're in a
+	 * consistent state wrt the writebuffer.  This also ensures that
+	 * any write-allocated cache lines in the vector page are written
+	 * back.  After this point, we can start to touch devices again.
 	 */
 	local_flush_tlb_all();
+	flush_cache_all();
 }
 
 /*

arch/arm/mm/ioremap.c

@@ -130,8 +130,7 @@ remap_area_pages(unsigned long start, unsigned long phys_addr,
  * mapping.  See include/asm-arm/proc-armv/pgtable.h for more information.
  */
 void __iomem *
-__ioremap(unsigned long phys_addr, size_t size, unsigned long flags,
-	  unsigned long align)
+__ioremap(unsigned long phys_addr, size_t size, unsigned long flags)
 {
 	void * addr;
 	struct vm_struct * area;

arch/arm/plat-omap/dmtimer.c

@@ -26,7 +26,7 @@
  */
 
 #include <linux/init.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 #include <asm/arch/dmtimer.h>
 #include <asm/io.h>
 #include <asm/arch/irqs.h>

arch/arm/plat-omap/ocpi.c

@@ -34,7 +34,7 @@
 
 #include <asm/io.h>
 #include <asm/hardware/clock.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)

arch/arm/plat-omap/pm.c

@@ -509,7 +509,7 @@ static void omap_pm_init_proc(void)
  *	@state:		suspend state we're entering.
  *
  */
-//#include <asm/arch/hardware.h>
+//#include <asm/hardware.h>
 
 static int omap_pm_prepare(suspend_state_t state)
 {

arch/arm/plat-omap/sram-fn.S

@@ -12,7 +12,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 	.text
 

arch/i386/kernel/acpi/boot.c

@@ -248,9 +248,7 @@ acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end)
 
 	acpi_table_print_madt_entry(header);
 
-	/* no utility in registering a disabled processor */
-	if (processor->flags.enabled == 0)
-		return 0;
+	/* Register even disabled CPUs for cpu hotplug */
 
 	x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
 

arch/i386/kernel/mpparse.c

@@ -220,8 +220,9 @@ static void __devinit MP_processor_info (struct mpc_config_processor *m)
 	num_processors++;
 
 	if ((num_processors > 8) &&
-	    APIC_XAPIC(ver) &&
-	    (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL))
+	    ((APIC_XAPIC(ver) &&
+	     (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)) ||
+	     (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)))
 		def_to_bigsmp = 1;
 	else
 		def_to_bigsmp = 0;

arch/ia64/kernel/ivt.S

@@ -91,16 +91,17 @@ ENTRY(vhpt_miss)
 	 * (the "original") TLB miss, which may either be caused by an instruction
 	 * fetch or a data access (or non-access).
 	 *
-	 * What we do here is normal TLB miss handing for the _original_ miss, followed
-	 * by inserting the TLB entry for the virtual page table page that the VHPT
-	 * walker was attempting to access.  The latter gets inserted as long
-	 * as both L1 and L2 have valid mappings for the faulting address.
-	 * The TLB entry for the original miss gets inserted only if
-	 * the L3 entry indicates that the page is present.
+	 * What we do here is normal TLB miss handing for the _original_ miss,
+	 * followed by inserting the TLB entry for the virtual page table page
+	 * that the VHPT walker was attempting to access.  The latter gets
+	 * inserted as long as page table entry above pte level have valid
+	 * mappings for the faulting address.  The TLB entry for the original
+	 * miss gets inserted only if the pte entry indicates that the page is
+	 * present.
 	 *
 	 * do_page_fault gets invoked in the following cases:
 	 *	- the faulting virtual address uses unimplemented address bits
-	 *	- the faulting virtual address has no L1, L2, or L3 mapping
+	 *	- the faulting virtual address has no valid page table mapping
 	 */
 	mov r16=cr.ifa				// get address that caused the TLB miss
 #ifdef CONFIG_HUGETLB_PAGE
@@ -126,7 +127,7 @@ ENTRY(vhpt_miss)
 #endif
 	;;
 	cmp.eq p6,p7=5,r17			// is IFA pointing into to region 5?
-	shr.u r18=r22,PGDIR_SHIFT		// get bits 33-63 of the faulting address
+	shr.u r18=r22,PGDIR_SHIFT		// get bottom portion of pgd index bit
 	;;
 (p7)	dep r17=r17,r19,(PAGE_SHIFT-3),3	// put region number bits in place
 
@@ -137,38 +138,38 @@ ENTRY(vhpt_miss)
 (p6)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
 (p7)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
 	;;
-(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=PTA + IFA(33,42)*8
-(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=pgd_offset for region 5
+(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=pgd_offset for region[0-4]
 	cmp.eq p7,p6=0,r21			// unused address bits all zeroes?
 #ifdef CONFIG_PGTABLE_4
-	shr.u r28=r22,PUD_SHIFT			// shift L2 index into position
+	shr.u r28=r22,PUD_SHIFT			// shift pud index into position
 #else
-	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
 #endif
 	;;
-	ld8 r17=[r17]				// fetch the L1 entry (may be 0)
+	ld8 r17=[r17]				// get *pgd (may be 0)
 	;;
-(p7)	cmp.eq p6,p7=r17,r0			// was L1 entry NULL?
+(p7)	cmp.eq p6,p7=r17,r0			// was pgd_present(*pgd) == NULL?
 #ifdef CONFIG_PGTABLE_4
-	dep r28=r28,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+	dep r28=r28,r17,3,(PAGE_SHIFT-3)	// r28=pud_offset(pgd,addr)
 	;;
-	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
-(p7)	ld8 r29=[r28]				// fetch the L2 entry (may be 0)
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
+(p7)	ld8 r29=[r28]				// get *pud (may be 0)
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r29,r0		// was L2 entry NULL?
-	dep r17=r18,r29,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+(p7)	cmp.eq.or.andcm p6,p7=r29,r0		// was pud_present(*pud) == NULL?
+	dep r17=r18,r29,3,(PAGE_SHIFT-3)	// r17=pmd_offset(pud,addr)
 #else
-	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// r17=pmd_offset(pgd,addr)
 #endif
 	;;
-(p7)	ld8 r20=[r17]				// fetch the L3 entry (may be 0)
-	shr.u r19=r22,PAGE_SHIFT		// shift L4 index into position
+(p7)	ld8 r20=[r17]				// get *pmd (may be 0)
+	shr.u r19=r22,PAGE_SHIFT		// shift pte index into position
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r20,r0		// was L3 entry NULL?
-	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// compute address of L4 page table entry
+(p7)	cmp.eq.or.andcm p6,p7=r20,r0		// was pmd_present(*pmd) == NULL?
+	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// r21=pte_offset(pmd,addr)
 	;;
-(p7)	ld8 r18=[r21]				// read the L4 PTE
-	mov r19=cr.isr				// cr.isr bit 0 tells us if this is an insn miss
+(p7)	ld8 r18=[r21]				// read *pte
+	mov r19=cr.isr				// cr.isr bit 32 tells us if this is an insn miss
 	;;
 (p7)	tbit.z p6,p7=r18,_PAGE_P_BIT		// page present bit cleared?
 	mov r22=cr.iha				// get the VHPT address that caused the TLB miss
@@ -202,25 +203,33 @@ ENTRY(vhpt_miss)
 	dv_serialize_data
 
 	/*
-	 * Re-check L2 and L3 pagetable.  If they changed, we may have received a ptc.g
+	 * Re-check pagetable entry.  If they changed, we may have received a ptc.g
 	 * between reading the pagetable and the "itc".  If so, flush the entry we
-	 * inserted and retry.
+	 * inserted and retry.  At this point, we have:
+	 *
+	 * r28 = equivalent of pud_offset(pgd, ifa)
+	 * r17 = equivalent of pmd_offset(pud, ifa)
+	 * r21 = equivalent of pte_offset(pmd, ifa)
+	 *
+	 * r29 = *pud
+	 * r20 = *pmd
+	 * r18 = *pte
 	 */
-	ld8 r25=[r21]				// read L4 entry again
-	ld8 r26=[r17]				// read L3 PTE again
+	ld8 r25=[r21]				// read *pte again
+	ld8 r26=[r17]				// read *pmd again
 #ifdef CONFIG_PGTABLE_4
-	ld8 r18=[r28]				// read L2 entry again
+	ld8 r19=[r28]				// read *pud again
 #endif
 	cmp.ne p6,p7=r0,r0
 	;;
-	cmp.ne.or.andcm p6,p7=r26,r20		// did L3 entry change
+	cmp.ne.or.andcm p6,p7=r26,r20		// did *pmd change
 #ifdef CONFIG_PGTABLE_4
-	cmp.ne.or.andcm p6,p7=r29,r18		// did L4 PTE change
+	cmp.ne.or.andcm p6,p7=r19,r29		// did *pud change
 #endif
 	mov r27=PAGE_SHIFT<<2
 	;;
 (p6)	ptc.l r22,r27				// purge PTE page translation
-(p7)	cmp.ne.or.andcm p6,p7=r25,r18		// did L4 PTE change
+(p7)	cmp.ne.or.andcm p6,p7=r25,r18		// did *pte change
 	;;
 (p6)	ptc.l r16,r27				// purge translation
 #endif
@@ -235,19 +244,19 @@ END(vhpt_miss)
 ENTRY(itlb_miss)
 	DBG_FAULT(1)
 	/*
-	 * The ITLB handler accesses the L3 PTE via the virtually mapped linear
+	 * The ITLB handler accesses the PTE via the virtually mapped linear
 	 * page table.  If a nested TLB miss occurs, we switch into physical
-	 * mode, walk the page table, and then re-execute the L3 PTE read
-	 * and go on normally after that.
+	 * mode, walk the page table, and then re-execute the PTE read and
+	 * go on normally after that.
 	 */
 	mov r16=cr.ifa				// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 .itlb_fault:
-	mov r17=cr.iha				// get virtual address of L3 PTE
+	mov r17=cr.iha				// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
-1:	ld8 r18=[r17]				// read L3 PTE
+1:	ld8 r18=[r17]				// read *pte
 	;;
 	mov b0=r29
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
@@ -262,7 +271,7 @@ ENTRY(itlb_miss)
 	 */
 	dv_serialize_data
 
-	ld8 r19=[r17]				// read L3 PTE again and see if same
+	ld8 r19=[r17]				// read *pte again and see if same
 	mov r20=PAGE_SHIFT<<2			// setup page size for purge
 	;;
 	cmp.ne p7,p0=r18,r19
@@ -279,19 +288,19 @@ END(itlb_miss)
 ENTRY(dtlb_miss)
 	DBG_FAULT(2)
 	/*
-	 * The DTLB handler accesses the L3 PTE via the virtually mapped linear
+	 * The DTLB handler accesses the PTE via the virtually mapped linear
 	 * page table.  If a nested TLB miss occurs, we switch into physical
-	 * mode, walk the page table, and then re-execute the L3 PTE read
-	 * and go on normally after that.
+	 * mode, walk the page table, and then re-execute the PTE read and
+	 * go on normally after that.
 	 */
 	mov r16=cr.ifa				// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 dtlb_fault:
-	mov r17=cr.iha				// get virtual address of L3 PTE
+	mov r17=cr.iha				// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
-1:	ld8 r18=[r17]				// read L3 PTE
+1:	ld8 r18=[r17]				// read *pte
 	;;
 	mov b0=r29
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
@@ -306,7 +315,7 @@ dtlb_fault:
 	 */
 	dv_serialize_data
 
-	ld8 r19=[r17]				// read L3 PTE again and see if same
+	ld8 r19=[r17]				// read *pte again and see if same
 	mov r20=PAGE_SHIFT<<2			// setup page size for purge
 	;;
 	cmp.ne p7,p0=r18,r19
@@ -420,7 +429,7 @@ ENTRY(nested_dtlb_miss)
 	 *		r30:	continuation address
 	 *		r31:	saved pr
 	 *
-	 * Output:	r17:	physical address of L3 PTE of faulting address
+	 * Output:	r17:	physical address of PTE of faulting address
 	 *		r29:	saved b0
 	 *		r30:	continuation address
 	 *		r31:	saved pr
@@ -450,33 +459,33 @@ ENTRY(nested_dtlb_miss)
 (p6)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
 (p7)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
 	;;
-(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=PTA + IFA(33,42)*8
-(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=pgd_offset for region 5
+(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=pgd_offset for region[0-4]
 	cmp.eq p7,p6=0,r21			// unused address bits all zeroes?
 #ifdef CONFIG_PGTABLE_4
-	shr.u r18=r22,PUD_SHIFT			// shift L2 index into position
+	shr.u r18=r22,PUD_SHIFT			// shift pud index into position
 #else
-	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
 #endif
 	;;
-	ld8 r17=[r17]				// fetch the L1 entry (may be 0)
+	ld8 r17=[r17]				// get *pgd (may be 0)
 	;;
-(p7)	cmp.eq p6,p7=r17,r0			// was L1 entry NULL?
-	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+(p7)	cmp.eq p6,p7=r17,r0			// was pgd_present(*pgd) == NULL?
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// r17=p[u|m]d_offset(pgd,addr)
 	;;
 #ifdef CONFIG_PGTABLE_4
-(p7)	ld8 r17=[r17]				// fetch the L2 entry (may be 0)
-	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+(p7)	ld8 r17=[r17]				// get *pud (may be 0)
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was L2 entry NULL?
-	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was pud_present(*pud) == NULL?
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// r17=pmd_offset(pud,addr)
 	;;
 #endif
-(p7)	ld8 r17=[r17]				// fetch the L3 entry (may be 0)
-	shr.u r19=r22,PAGE_SHIFT		// shift L4 index into position
+(p7)	ld8 r17=[r17]				// get *pmd (may be 0)
+	shr.u r19=r22,PAGE_SHIFT		// shift pte index into position
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was L3 entry NULL?
-	dep r17=r19,r17,3,(PAGE_SHIFT-3)	// compute address of L4 page table entry
+(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was pmd_present(*pmd) == NULL?
+	dep r17=r19,r17,3,(PAGE_SHIFT-3)	// r17=pte_offset(pmd,addr);
 (p6)	br.cond.spnt page_fault
 	mov b0=r30
 	br.sptk.many b0				// return to continuation point

arch/mips/Makefile

@@ -700,6 +700,7 @@ load-$(CONFIG_SNI_RM200_PCI)	+= 0xffffffff80600000
 #
 core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/jmr3927/rbhma3100/ \
 				   arch/mips/jmr3927/common/
+cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
 load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
 
 #

arch/mips/au1000/common/setup.c

@@ -93,7 +93,7 @@ void __init plat_setup(void)
 
 	argptr = prom_getcmdline();
 
-#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
+#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
 	if ((argptr = strstr(argptr, "console=")) == NULL) {
 		argptr = prom_getcmdline();
 		strcat(argptr, " console=ttyS0,115200");

arch/mips/configs/atlas_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:13 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 12:14:02 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -191,6 +209,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -309,6 +328,10 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -363,6 +386,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -412,6 +436,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -472,10 +497,18 @@ CONFIG_IPDDP_DECAP=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -488,8 +521,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -498,13 +533,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -565,18 +601,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -643,6 +670,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -653,6 +681,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -707,6 +736,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -736,7 +766,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -754,6 +783,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -933,6 +963,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -991,6 +1022,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -1037,7 +1072,7 @@ CONFIG_JFS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set

arch/mips/configs/bigsur_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:17 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:04:36 2005
 #
 CONFIG_MIPS=y
 
@@ -60,6 +60,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -127,8 +144,8 @@ CONFIG_SIBYTE_SB1xxx_SOC=y
 # CONFIG_CPU_SB1_PASS_2_112x is not set
 # CONFIG_CPU_SB1_PASS_3 is not set
 # CONFIG_SIMULATION is not set
-# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
-# CONFIG_CONFIG_SB1_CERR_STALL is not set
+# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_SB1_CERR_STALL is not set
 CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
@@ -198,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
 CONFIG_PREEMPT_NONE=y
@@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -353,14 +375,6 @@ CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -443,6 +457,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -582,6 +597,7 @@ CONFIG_GEN_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -634,6 +650,7 @@ CONFIG_SENSORS_PCA9539=y
 CONFIG_SENSORS_PCF8591=y
 CONFIG_SENSORS_RTC8564=y
 CONFIG_SENSORS_MAX6875=y
+# CONFIG_RTC_X1205_I2C is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
@@ -685,6 +702,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -823,6 +844,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set

arch/mips/configs/capcella_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:20 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:04:39 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -270,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -329,16 +352,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -412,7 +426,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -430,6 +443,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -586,6 +600,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -601,6 +616,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -659,6 +675,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/cobalt_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:23 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:04:42 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -172,6 +190,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -316,18 +340,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -401,7 +416,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -419,6 +433,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -574,6 +589,7 @@ CONFIG_COBALT_LCD=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -632,6 +648,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/db1000_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:26 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:04 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -201,7 +220,6 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 
 #
@@ -259,15 +277,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -293,6 +315,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -343,6 +369,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -399,6 +426,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -417,18 +449,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -473,7 +496,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -490,6 +512,7 @@ CONFIG_CICADA_PHY=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -532,6 +555,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -598,13 +622,17 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -633,11 +661,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -696,6 +727,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/db1100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:29 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:07 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -247,15 +266,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -281,6 +304,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -331,6 +358,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -387,6 +415,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -405,18 +438,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -461,7 +485,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -478,6 +501,7 @@ CONFIG_CICADA_PHY=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -507,6 +531,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -573,13 +598,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -608,6 +636,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -650,12 +679,11 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_AU1100=y
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1100=y
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -664,6 +692,7 @@ CONFIG_FB_AU1100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -697,6 +726,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/db1200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:32 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:10 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -200,7 +219,6 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_AU1X00=m
 
 #
@@ -255,13 +273,17 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -287,6 +309,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -333,6 +359,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -394,6 +421,11 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -414,16 +446,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -495,6 +518,7 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
@@ -545,6 +569,7 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -638,13 +663,17 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -673,11 +702,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -720,12 +752,11 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_AU1200=y
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1200=y
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -756,6 +787,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -862,6 +897,7 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y

arch/mips/configs/db1500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:36 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:15 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -208,7 +227,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_AU1X00=m
 
 #
@@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -432,18 +464,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -518,7 +541,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -537,7 +559,9 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -599,6 +623,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -664,13 +689,17 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -702,12 +731,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -756,12 +788,94 @@ CONFIG_SOUND=y
 #
 # Advanced Linux Sound Architecture
 #
-# CONFIG_SND is not set
+CONFIG_SND=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# ALSA MIPS devices
+#
+CONFIG_SND_AU1X00=m
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
 
 #
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
+CONFIG_OBSOLETE_OSS_DRIVER=y
 # CONFIG_SOUND_BT878 is not set
 # CONFIG_SOUND_CMPCI is not set
 # CONFIG_SOUND_EMU10K1 is not set
@@ -774,7 +888,7 @@ CONFIG_SOUND_PRIME=y
 # CONFIG_SOUND_MAESTRO3 is not set
 # CONFIG_SOUND_ICH is not set
 # CONFIG_SOUND_SONICVIBES is not set
-CONFIG_SOUND_AU1000=y
+# CONFIG_SOUND_AU1000 is not set
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
@@ -815,12 +929,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # USB Device Class drivers
 #
 # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 

arch/mips/configs/db1550_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:39 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:11:18 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,7 +226,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_AU1X00=m
 
 #
@@ -266,15 +284,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -300,6 +322,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -350,6 +376,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -412,6 +439,11 @@ CONFIG_MTD_NAND_AU1550=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -435,18 +467,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -550,7 +573,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -569,7 +591,9 @@ CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -639,6 +663,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -704,13 +729,17 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -742,12 +771,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -800,6 +832,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ddb5476_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:42 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:04 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -261,6 +280,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -292,6 +315,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -321,18 +345,9 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -412,7 +427,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -430,6 +444,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -443,7 +458,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -591,6 +605,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -633,7 +648,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
@@ -642,6 +656,7 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -658,7 +673,6 @@ CONFIG_FB=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -687,6 +701,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ddb5477_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:45 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:08 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -260,6 +279,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -291,6 +314,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -382,7 +397,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -400,6 +414,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -575,6 +590,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -633,6 +649,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/decstation_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:48 2005
+# Linux kernel version: 2.6.14
+# Fri Nov 11 13:29:30 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -318,16 +341,7 @@ CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -365,12 +379,13 @@ CONFIG_SCSI_CONSTANTS=y
 #
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 CONFIG_SCSI_DECNCR=y
 # CONFIG_SCSI_DECSII is not set
 # CONFIG_SCSI_SATA is not set
@@ -407,7 +422,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -491,10 +505,7 @@ CONFIG_ZS=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_DZ=y
-CONFIG_SERIAL_DZ_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_DZ is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -520,6 +531,7 @@ CONFIG_RTC=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -562,15 +574,14 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_PMAG_AA is not set
 CONFIG_FB_PMAG_BA=y
 CONFIG_FB_PMAGB_B=y
 # CONFIG_FB_MAXINE is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -594,6 +605,10 @@ CONFIG_LOGO_DEC_CLUT224=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -746,6 +761,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set

arch/mips/configs/e55_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:51 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:15 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -262,6 +281,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -317,16 +340,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -403,7 +417,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -427,7 +440,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -552,6 +564,7 @@ CONFIG_WATCHDOG=y
 # CONFIG_WDT is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -564,6 +577,7 @@ CONFIG_GPIO_VR41XX=y
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -622,6 +636,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ev64120_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:54 2005
+# Linux kernel version: 2.6.14
+# Wed Nov  9 11:05:12 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_KMOD is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -326,18 +349,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -389,7 +403,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -407,6 +420,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -464,6 +478,7 @@ CONFIG_PPP_ASYNC=y
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -569,6 +584,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -627,6 +643,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ev96100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:57 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:22 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_KMOD is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -185,6 +203,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -269,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -323,18 +346,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -379,7 +393,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -518,6 +531,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -575,6 +589,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ip22_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:01 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 13:38:41 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -599,7 +627,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -820,6 +848,10 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set

arch/mips/configs/ip27_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:04 2005
+# Linux kernel version: 2.6.15-rc1
+# Sun Nov 13 23:56:52 2005
 #
 CONFIG_MIPS=y
 
@@ -59,6 +59,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -186,6 +203,7 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=64
 CONFIG_PREEMPT_NONE=y
@@ -284,10 +302,18 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -300,8 +326,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -310,12 +338,13 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -377,14 +406,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -428,6 +449,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -437,6 +459,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -447,7 +470,6 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLOGIC_1280_1040=y
 CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA21XX is not set
 # CONFIG_SCSI_QLA22XX is not set
@@ -487,6 +509,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -516,7 +539,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -532,8 +554,12 @@ CONFIG_CICADA_PHY=m
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_SGI_IOC3_ETH=y
+CONFIG_SGI_IOC3_ETH_HW_RX_CSUM=y
+CONFIG_SGI_IOC3_ETH_HW_TX_CSUM=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -672,6 +698,7 @@ CONFIG_SGI_IP27_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -724,6 +751,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -762,7 +793,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set

arch/mips/configs/ip32_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:07 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:32 2005
 #
 CONFIG_MIPS=y
 
@@ -51,6 +51,23 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -271,6 +289,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -302,6 +324,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -334,14 +357,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -385,6 +400,7 @@ CONFIG_SCSI_SAS_ATTRS=y
 #
 # SCSI low-level drivers
 #
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -399,6 +415,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -432,6 +449,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -461,7 +479,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -480,6 +497,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_SGI_O2MACE_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -637,6 +655,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -695,6 +714,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/it8172_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:09 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 13:42:45 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -266,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -315,6 +338,7 @@ CONFIG_MTD_CHAR=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -372,6 +396,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -390,18 +419,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -467,7 +487,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -609,6 +628,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -669,10 +689,10 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
 CONFIG_SOUND_IT8172=y
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_AD1980 is not set
 
 #
 # USB support
@@ -680,6 +700,10 @@ CONFIG_SOUND_IT8172=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ivr_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:12 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:38 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -178,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -324,18 +347,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -409,7 +423,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -427,6 +440,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -539,7 +553,8 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 CONFIG_QTRONIX_KEYBOARD=y
-# CONFIG_IT8172_SCR0 is not set
+CONFIG_IT8172_SCR0=y
+CONFIG_IT8172_SCR1=y
 
 #
 # Serial drivers
@@ -583,6 +598,7 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -641,6 +657,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/jaguar-atx_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:14 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:41 2005
 #
 CONFIG_MIPS=y
 
@@ -54,6 +54,24 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -184,6 +202,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
@@ -259,6 +278,10 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -317,18 +340,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -380,7 +394,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -398,6 +411,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -591,6 +605,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/jmr3927_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:17 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:44 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -168,6 +186,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -256,6 +275,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -287,6 +310,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -315,18 +339,9 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -378,7 +393,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -396,6 +410,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -561,6 +576,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -603,7 +619,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
@@ -612,6 +627,7 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -628,7 +644,6 @@ CONFIG_FB=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -656,6 +671,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/lasat200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:19 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:47 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -267,6 +286,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -317,6 +340,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -374,6 +398,11 @@ CONFIG_MTD_LASAT=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -396,18 +425,9 @@ CONFIG_MTD_LASAT=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -511,7 +531,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -529,6 +548,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -684,6 +704,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -742,6 +763,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/malta_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:22 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 13:42:55 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -197,6 +215,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -315,6 +334,10 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -369,6 +392,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -418,6 +442,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -478,10 +503,18 @@ CONFIG_IPDDP_DECAP=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -494,8 +527,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -504,13 +539,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-CONFIG_NET_CLS_IND=y
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -572,18 +608,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -680,6 +707,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
 CONFIG_SCSI_3W_9XXX=m
 CONFIG_SCSI_ACARD=m
@@ -695,6 +723,7 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -745,6 +774,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -774,7 +804,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -792,6 +821,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -967,6 +997,7 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -1025,6 +1056,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -1071,7 +1106,7 @@ CONFIG_JFS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set

arch/mips/configs/mipssim_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:25 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:05:55 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -184,6 +202,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -281,10 +300,18 @@ CONFIG_SCTP_HMAC_MD5=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -297,8 +324,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -311,6 +340,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 # CONFIG_NET_CLS_POLICE is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -361,16 +391,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -537,6 +558,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -588,6 +610,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -721,6 +747,8 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
 # CONFIG_DEBUG_STACK_USAGE is not set

arch/mips/configs/mpc30x_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:28 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:12:01 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -182,6 +200,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -210,7 +229,6 @@ CONFIG_PCMCIA_IOCTL=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 CONFIG_PCMCIA_VRC4173=y
 
 #
@@ -281,6 +299,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -341,16 +363,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -612,6 +625,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -625,6 +639,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
@@ -632,6 +648,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -713,12 +730,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 

arch/mips/configs/ocelot_3_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:30 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:01:36 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
@@ -265,15 +284,19 @@ CONFIG_IPV6=m
 # CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -365,16 +392,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -411,12 +429,13 @@ CONFIG_SCSI_PROC_FS=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -427,6 +446,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -461,6 +481,7 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -490,7 +511,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -508,6 +528,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -589,6 +610,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -691,6 +713,7 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -733,7 +756,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
@@ -742,6 +764,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -758,7 +781,6 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -767,6 +789,7 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
@@ -792,6 +815,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ocelot_c_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:33 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:05 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,23 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -176,6 +193,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -267,6 +285,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -298,6 +320,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -329,14 +352,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -388,7 +403,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -406,6 +420,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -562,6 +577,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -620,6 +636,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ocelot_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:35 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:08 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -181,6 +199,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -296,6 +319,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -319,18 +343,9 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -375,7 +390,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -513,6 +527,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -570,6 +585,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/ocelot_g_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:38 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:11 2005
 #
 CONFIG_MIPS=y
 
@@ -50,6 +50,23 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +196,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -270,6 +288,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -301,6 +323,7 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -332,14 +355,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=y
 
 #
@@ -391,7 +406,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -410,6 +424,7 @@ CONFIG_MII=y
 CONFIG_GALILEO_64240_ETH=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -565,6 +580,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -623,6 +639,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/pb1100_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:41 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:12:31 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -203,7 +222,6 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 
 #
@@ -261,15 +279,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -295,6 +317,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -345,6 +371,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -401,6 +428,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -419,18 +451,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -475,7 +498,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -492,6 +514,7 @@ CONFIG_CICADA_PHY=m
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_MIPS_AU1X00_ENET is not set
+# CONFIG_SMC91X is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -526,6 +549,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -592,12 +616,19 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_AU1X00 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -624,11 +655,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -687,6 +721,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/pb1500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:44 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:14:25 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,7 +226,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 CONFIG_PD6729=m
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 CONFIG_PCCARD_NONSTATIC=m
 
@@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -565,7 +587,9 @@ CONFIG_MII=m
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -635,6 +659,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -700,13 +725,17 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -738,12 +767,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -796,6 +828,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/pb1550_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:47 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:15:34 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,7 +226,6 @@ CONFIG_CARDBUS=y
 # CONFIG_YENTA is not set
 CONFIG_PD6729=m
 # CONFIG_I82092 is not set
-# CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
 CONFIG_PCCARD_NONSTATIC=m
 
@@ -267,15 +285,19 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -301,6 +323,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -351,6 +377,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,6 +435,11 @@ CONFIG_MTD_ALCHEMY=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -431,18 +463,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -546,7 +569,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -565,7 +587,9 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
 
 #
 # Tulip family network device support
@@ -627,6 +651,7 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -692,13 +717,17 @@ CONFIG_SERIO_RAW=m
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
 
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_AU1X00=y
-CONFIG_SERIAL_AU1X00_CONSOLE=y
+# CONFIG_SERIAL_AU1X00 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -730,12 +759,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 # PCMCIA character devices
 #
 CONFIG_SYNCLINK_CS=m
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -788,6 +820,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/pnx8550-jbs_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:50 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:25 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -179,6 +197,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -265,6 +284,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -325,16 +348,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -423,12 +437,13 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -439,6 +454,7 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -473,6 +489,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -510,6 +527,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -681,6 +699,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -763,12 +782,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1039,6 +1061,8 @@ CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1055,7 +1079,31 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -1067,4 +1115,4 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m

arch/mips/configs/pnx8550-v2pci_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:53 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:02:38 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -255,13 +274,17 @@ CONFIG_IPV6=m
 # CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 # CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -293,6 +316,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -352,16 +379,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -451,12 +469,13 @@ CONFIG_BLK_DEV_SD=y
 #
 CONFIG_SCSI_SPI_ATTRS=m
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -472,6 +491,7 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -506,6 +526,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -543,6 +564,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -622,6 +644,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
@@ -746,6 +769,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -796,6 +820,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -872,7 +897,6 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
@@ -881,6 +905,7 @@ CONFIG_FB=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -897,7 +922,6 @@ CONFIG_FB=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -946,12 +970,15 @@ CONFIG_USB_DEVICEFS=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1235,7 +1262,31 @@ CONFIG_CMDLINE=""
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -1247,6 +1298,6 @@ CONFIG_CMDLINE=""
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m

arch/mips/configs/qemu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:56 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:31 2005
 #
 CONFIG_MIPS=y
 
@@ -49,6 +49,24 @@ CONFIG_BASE_SMALL=1
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
 #
 # Machine selection
 #
@@ -168,6 +186,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -234,6 +253,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -265,6 +288,7 @@ CONFIG_STANDALONE=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
 
 #
 # Memory Technology Devices (MTD)
@@ -289,16 +313,7 @@ CONFIG_CONNECTOR=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -353,7 +368,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=y
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -385,7 +399,6 @@ CONFIG_NET_ISA=y
 # CONFIG_ETH16I is not set
 CONFIG_NE2000=y
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -557,6 +570,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/rbhma4500_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:26:59 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:02:45 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -188,6 +206,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -265,15 +284,19 @@ CONFIG_IPV6=m
 # CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK is not set
 
 #
 # IP: Netfilter Configuration
 #
 # CONFIG_IP_NF_CONNTRACK is not set
-CONFIG_IP_NF_PPTP=m
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -305,6 +328,10 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -355,6 +382,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -411,6 +439,11 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_NAND is not set
 
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
 #
 # Parallel port support
 #
@@ -438,16 +471,7 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
@@ -556,7 +580,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -574,6 +597,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -619,7 +643,6 @@ CONFIG_NET_PCI=y
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_LAN_SAA9730 is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -668,7 +691,6 @@ CONFIG_NET_RADIO=y
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW_DEBUG is not set
 CONFIG_IPW2200=m
-# CONFIG_AIRO is not set
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
 
@@ -692,6 +714,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 # CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
@@ -804,6 +827,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -847,7 +871,6 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
@@ -856,6 +879,7 @@ CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
@@ -876,7 +900,6 @@ CONFIG_FB_ATY_CT=y
 # CONFIG_FB_SMIVGX is not set
 # CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -926,12 +949,15 @@ CONFIG_USB=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 
@@ -1106,6 +1132,7 @@ CONFIG_RELAYFS_FS=m
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y

arch/mips/configs/rm200_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:03 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 14:02:50 2005
 #
 CONFIG_MIPS=y
 
@@ -58,6 +58,24 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -190,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -272,6 +291,10 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -325,6 +348,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -374,6 +398,7 @@ CONFIG_IP6_NF_MATCH_PHYSDEV=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -430,10 +455,18 @@ CONFIG_DECNET=m
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CLK_JIFFIES=y
 # CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -446,8 +479,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -456,13 +491,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -583,18 +619,9 @@ CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -638,6 +665,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -651,6 +679,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_MEGARAID_NEWGEN=y
 CONFIG_MEGARAID_MM=m
 CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
@@ -723,6 +752,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -752,7 +782,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -770,6 +799,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -984,6 +1014,7 @@ CONFIG_RTC=m
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -1074,12 +1105,15 @@ CONFIG_USB_UHCI_HCD=m
 #
 # USB Device Class drivers
 #
-CONFIG_USB_BLUETOOTH_TTY=m
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1196,6 +1230,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
@@ -1271,7 +1306,7 @@ CONFIG_REISERFS_FS_SECURITY=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set

arch/mips/configs/sb1250-swarm_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:05 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:43 2005
 #
 CONFIG_MIPS=y
 
@@ -58,6 +58,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -126,8 +143,8 @@ CONFIG_CPU_SB1_PASS_1=y
 # CONFIG_CPU_SB1_PASS_3 is not set
 CONFIG_SIBYTE_HAS_LDT=y
 # CONFIG_SIMULATION is not set
-# CONFIG_CONFIG_SB1_CEX_ALWAYS_FATAL is not set
-# CONFIG_CONFIG_SB1_CERR_STALL is not set
+# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
+# CONFIG_SB1_CERR_STALL is not set
 CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
@@ -200,6 +217,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT_NONE=y
@@ -295,6 +313,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -359,14 +381,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -441,7 +455,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -459,6 +472,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -599,6 +613,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -651,6 +666,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/sead_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:07 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:45 2005
 #
 CONFIG_MIPS=y
 
@@ -47,6 +47,24 @@ CONFIG_BASE_SMALL=0
 #
 # CONFIG_MODULES is not set
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -173,6 +191,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -242,17 +261,8 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=18432
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
 #
 # ATA/ATAPI/MFM/RLL support
 #
@@ -353,6 +363,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -403,6 +414,10 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/tb0226_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:10 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:49 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -277,6 +296,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -339,16 +362,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -385,12 +399,13 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -401,6 +416,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -435,6 +451,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -464,7 +481,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -482,6 +498,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -634,6 +651,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -650,6 +668,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -733,12 +752,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set

arch/mips/configs/tb0229_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:13 2005
+# Linux kernel version: 2.6.14
+# Wed Nov  9 11:11:47 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -183,6 +201,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -278,6 +297,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -341,18 +364,9 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -404,7 +418,6 @@ CONFIG_DUMMY=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -422,6 +435,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -504,6 +518,7 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
@@ -589,6 +604,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -605,6 +621,7 @@ CONFIG_GPIO_VR41XX=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -688,12 +705,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_USB_BLUETOOTH_TTY is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
 #
 # CONFIG_USB_STORAGE is not set
 

arch/mips/configs/workpad_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:16 2005
+# Linux kernel version: 2.6.15-rc1
+# Tue Nov 15 11:17:02 2005
 #
 CONFIG_MIPS=y
 
@@ -56,6 +56,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -180,6 +198,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -273,6 +292,10 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -328,16 +351,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -415,7 +429,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -439,7 +452,6 @@ CONFIG_MII=m
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -577,6 +589,7 @@ CONFIG_WATCHDOG=y
 # CONFIG_WDT is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_RTC_VR41XX is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -588,12 +601,15 @@ CONFIG_WATCHDOG=y
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_GPIO_VR41XX is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -652,6 +668,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #

arch/mips/configs/yosemite_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:27:18 2005
+# Linux kernel version: 2.6.14
+# Mon Nov  7 23:06:59 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_OBSOLETE_MODPARM=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -181,6 +199,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PREEMPT_NONE=y
@@ -260,6 +279,10 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
 # CONFIG_NET_CLS_ROUTE is not set
 
@@ -319,18 +342,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -382,7 +396,6 @@ CONFIG_NETDEVICES=y
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -400,6 +413,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -575,6 +589,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -690,6 +708,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set

arch/mips/ddb5xxx/ddb5477/lcd44780.c

@@ -55,7 +55,7 @@ void lcd44780_data(unsigned char c)
 
 void lcd44780_puts(const char* s)
 {
-	int i,j;
+	int j;
 	int pos = 0;
 
 	lcd44780_command(LCD44780_CLEAR);
@@ -76,8 +76,12 @@ void lcd44780_puts(const char* s)
 		}
 	}
 #ifdef LCD44780_PUTS_PAUSE
-	for(i = 1; i < 2000; i++)
-		lcd44780_wait();
+	{
+		int i;
+
+		for(i = 1; i < 2000; i++)
+			lcd44780_wait();
+	}
 #endif
 }
 

arch/mips/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Thu Oct 20 22:25:09 2005
+# Linux kernel version: 2.6.14
+# Thu Nov 10 12:13:58 2005
 #
 CONFIG_MIPS=y
 
@@ -57,6 +57,24 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
 #
 # Machine selection
 #
@@ -187,6 +205,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -292,6 +311,10 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
@@ -345,6 +368,7 @@ CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -393,6 +417,7 @@ CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_MARK=m
 CONFIG_IP6_NF_TARGET_HL=m
@@ -424,10 +449,18 @@ CONFIG_SCTP_HMAC_MD5=y
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_CLK_JIFFIES is not set
 CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
 # CONFIG_NET_SCH_CLK_CPU is not set
+
+#
+# Queueing/Scheduling
+#
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
@@ -440,8 +473,10 @@ CONFIG_NET_SCH_GRED=m
 CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
+
+#
+# Classification
+#
 CONFIG_NET_CLS=y
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
@@ -450,13 +485,14 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
 # CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
 # CONFIG_CLS_U32_MARK is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_ESTIMATOR=y
 
 #
 # Network testing
@@ -509,18 +545,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
-# CONFIG_LBD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -564,6 +591,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 #
 # SCSI low-level drivers
 #
+CONFIG_ISCSI_TCP=m
 CONFIG_SGIWD93_SCSI=y
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -599,7 +627,6 @@ CONFIG_TUN=m
 # PHY device support
 #
 CONFIG_PHYLIB=m
-CONFIG_PHYCONTROL=y
 
 #
 # MII PHY device drivers
@@ -752,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # TPM devices
 #
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -820,6 +848,10 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
 #
 # USB Gadget Support
 #
@@ -856,7 +888,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=m
+CONFIG_XFS_QUOTA=y
 CONFIG_XFS_SECURITY=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set

arch/mips/jmr3927/common/rtc_ds1742.c

@@ -41,11 +41,11 @@
 #include <linux/types.h>
 #include <linux/time.h>
 #include <linux/rtc.h>
+#include <linux/ds1742rtc.h>
 
 #include <asm/time.h>
 #include <asm/addrspace.h>
 
-#include <asm/jmr3927/ds1742rtc.h>
 #include <asm/debug.h>
 
 #define	EPOCH		2000

arch/mips/jmr3927/rbhma3100/setup.c

@@ -357,7 +357,7 @@ static void __init jmr3927_board_init(void)
 		       jmr3927_io_dipsw());
 }
 
-void __init plat_setup(void)
+void __init tx3927_setup(void)
 {
 	int i;
 

arch/mips/mips-boards/sead/sead_int.c

@@ -30,19 +30,9 @@
 
 extern asmlinkage void mipsIRQ(void);
 
-asmlinkage void sead_hw0_irqdispatch(struct pt_regs *regs)
-{
-	do_IRQ(SEADINT_UART0, regs);
-}
-
-asmlinkage void sead_hw1_irqdispatch(struct pt_regs *regs)
-{
-	do_IRQ(SEADINT_UART1, regs);
-}
-
 void __init arch_init_irq(void)
 {
-	mips_cpu_irq_init(0);
+	mips_cpu_irq_init(MIPSCPU_INT_BASE);
 
 	/* Now safe to set the exception vector. */
 	set_except_vector(0, mipsIRQ);

arch/mips/mips-boards/sead/sead_setup.c

@@ -45,7 +45,7 @@ const char *get_system_type(void)
 	return "MIPS SEAD";
 }
 
-static void __init sead_setup(void)
+void __init plat_setup(void)
 {
 	ioport_resource.end = 0x7fffffff;
 
@@ -69,7 +69,7 @@ static void __init serial_init(void)
 #else
 	s.iobase = SEAD_UART0_REGS_BASE+3;
 #endif
-	s.irq = SEADINT_UART0;
+	s.irq = MIPSCPU_INT_BASE + MIPSCPU_INT_UART0;
 	s.uartclk = SEAD_BASE_BAUD * 16;
 	s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	s.iotype = 0;

arch/mips/momentum/ocelot_g/gt-irq.c

@@ -178,7 +178,7 @@ void gt64240_time_init(void)
 	timer.name = "timer";
 	timer.dev_id = NULL;
 	timer.next = NULL;
-	timer.mask = 0;
+	timer.mask = CPU_MASK_NONE;
 	irq_desc[6].action = &timer;
 
 	enable_irq(6);

arch/mips/pci/Makefile

@@ -15,7 +15,7 @@ obj-$(CONFIG_MIPS_GT96100)	+= ops-gt96100.o
 obj-$(CONFIG_PCI_MARVELL)	+= ops-marvell.o
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
-obj-$(CONFIG_MIPS_TX3927)	+= ops-jmr3927.o
+obj-$(CONFIG_MIPS_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
 obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
 

arch/mips/pci/ops-tx3927.c

@@ -72,13 +72,9 @@ static inline int check_abort(void)
 static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
-	int ret, busno;
+	int ret;
 
-	/* check if the bus is top-level */
-	if (bus->parent != NULL)
-		busno = bus->number;
-
-	ret = mkaddr(busno, devfn, where);
+	ret = mkaddr(bus->number, devfn, where);
 	if (ret)
 		return ret;
 
@@ -102,15 +98,9 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
-	int ret, busno;
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL)
-		bus = bus->number;
-	else
-		bus = 0;
+	int ret;
 
-	ret = mkaddr(busno, devfn, where);
+	ret = mkaddr(bus->number, devfn, where);
 	if (ret)
 		return ret;
 
@@ -120,7 +110,7 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		break;
 
 	case 2:
-		*(volatile u16 *) (unsigned longulong) & tx3927_pcicptr->icd | (where & 2)) =
+		*(volatile u16 *) ((unsigned long) & tx3927_pcicptr->icd | (where & 2)) =
 	    cpu_to_le16(val);
 		break;
 
@@ -137,8 +127,8 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 }
 
 struct pci_ops jmr3927_pci_ops = {
-	jmr3927_pcibios_read_config,
-	jmr3927_pcibios_write_config,
+	jmr3927_pci_read_config,
+	jmr3927_pci_write_config,
 };
 
 
@@ -159,15 +149,14 @@ unsigned long tc_readl(volatile __u32 * addr)
 {
 	unsigned long val;
 
-	addr = PHYSADDR(addr);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
+	    (unsigned long) CPHYSADDR(addr);
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	/* clear by setting */
 	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
@@ -176,12 +165,11 @@ unsigned long tc_readl(volatile __u32 * addr)
 
 void tc_writel(unsigned long data, volatile __u32 * addr)
 {
-	addr = PHYSADDR(addr);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
 	    cpu_to_le32(data);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
-	    (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
+	    (unsigned long) CPHYSADDR(addr);
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
@@ -198,21 +186,15 @@ unsigned char tx_ioinb(unsigned char *addr)
 
 	ioaddr = (unsigned long) addr;
 	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x7;
-	else if (offset == 1)
-		byte = 0xb;
-	else if (offset == 2)
-		byte = 0xd;
-	else if (offset == 3)
-		byte = 0xe;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	byte = 0xf & ~(8 >> offset);
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	val = val & 0xff;
 	/* clear by setting */
@@ -229,18 +211,12 @@ void tx_iooutb(unsigned long data, unsigned char *addr)
 	data = data | (data << 8) | (data << 16) | (data << 24);
 	ioaddr = (unsigned long) addr;
 	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x7;
-	else if (offset == 1)
-		byte = 0xb;
-	else if (offset == 2)
-		byte = 0xd;
-	else if (offset == 3)
-		byte = 0xe;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	byte = 0xf & ~(8 >> offset);
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	/* clear by setting */
@@ -255,18 +231,16 @@ unsigned short tx_ioinw(unsigned short *addr)
 	int byte;
 
 	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x3;
-	else if (offset == 2)
-		byte = 0xc;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	offset = ioaddr & 0x2;
+	byte = 3 << offset;
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	val = val & 0xffff;
 	/* clear by setting */
@@ -283,15 +257,13 @@ void tx_iooutw(unsigned long data, unsigned short *addr)
 
 	data = data | (data << 16);
 	ioaddr = (unsigned long) addr;
-	offset = ioaddr & 0x3;
-	if (offset == 0)
-		byte = 0x3;
-	else if (offset == 2)
-		byte = 0xc;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata = data;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	offset = ioaddr & 0x2;
+	byte = 3 << offset;
+
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data;
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	/* clear by setting */
@@ -304,14 +276,14 @@ unsigned long tx_ioinl(unsigned int *addr)
 	__u32 ioaddr;
 
 	ioaddr = (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));
 	val =
-	    le32_to_cpu(*(volatile u32 *) (ulong) & tx3927_pcicptr->
+	    le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr->
 			ipcidata);
 	/* clear by setting */
 	tx3927_pcicptr->istat |= PCI_ISTAT_IDICC;
@@ -323,11 +295,11 @@ void tx_iooutl(unsigned long data, unsigned int *addr)
 	__u32 ioaddr;
 
 	ioaddr = (unsigned long) addr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcidata =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata =
 	    cpu_to_le32(data);
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipciaddr =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr =
 	    (unsigned long) ioaddr;
-	*(volatile u32 *) (ulong) & tx3927_pcicptr->ipcibe =
+	*(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe =
 	    (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) |
 	    PCI_IPCIBE_IBE_LONG;
 	while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC));

arch/mips/pci/pci-jmr3927.c

@@ -54,5 +54,5 @@ struct pci_controller jmr3927_controller = {
 	.pci_ops	= &jmr3927_pci_ops,
 	.io_resource	= &pci_io_resource,
 	.mem_resource	= &pci_mem_resource,
-	.mem_offset	= JMR3927_PCIMEM;
+	.mem_offset	= JMR3927_PCIMEM
 };

arch/mips/sgi-ip32/crime.c

@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <asm/bootinfo.h>
 #include <asm/io.h>
 #include <asm/mipsregs.h>
@@ -18,8 +19,10 @@
 #include <asm/ip32/crime.h>
 #include <asm/ip32/mace.h>
 
-struct sgi_crime *crime;
-struct sgi_mace *mace;
+struct sgi_crime __iomem *crime;
+struct sgi_mace __iomem *mace;
+
+EXPORT_SYMBOL_GPL(mace);
 
 void __init crime_init(void)
 {

arch/parisc/kernel/drivers.c

@@ -499,8 +499,12 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
 
 	dev = create_parisc_device(mod_path);
 	if (dev->id.hw_type != HPHW_FAULTY) {
-		printk("Two devices have hardware path %s.  Please file a bug with HP.\n"
-			"In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev));
+		printk(KERN_ERR "Two devices have hardware path [%s].  "
+				"IODC data for second device: "
+				"%02x%02x%02x%02x%02x%02x\n"
+				"Rearranging GSC cards sometimes helps\n",
+			parisc_pathname(dev), iodc_data[0], iodc_data[1],
+			iodc_data[3], iodc_data[4], iodc_data[5], iodc_data[6]);
 		return NULL;
 	}
 

arch/parisc/kernel/entry.S

@@ -1846,6 +1846,7 @@ sys_clone_wrapper:
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
+	/* WARNING - Clobbers r19 and r21, userspace must save these! */
 	STREG	%r2,PT_GR19(%r1)	/* save for child */
 	STREG	%r30,PT_GR21(%r1)
 	BL	sys_clone,%r2

arch/parisc/kernel/inventory.c

@@ -188,7 +188,7 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 	temp = pa_pdc_cell.cba;
 	dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
 	if (!dev) {
-		return PDC_NE_MOD;
+		return PDC_OK;
 	}
 
 	/* alloc_pa_dev sets dev->hpa */

arch/parisc/kernel/ioctl32.c

@@ -19,536 +19,6 @@
 #define CODE
 #include "compat_ioctl.c"
 
-/* Use this to get at 32-bit user passed pointers. 
-   See sys_sparc32.c for description about these. */
-#define A(__x) ((unsigned long)(__x))
-/* The same for use with copy_from_user() and copy_to_user(). */
-#define B(__x) ((void *)(unsigned long)(__x))
-
-#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE)
-/* This really belongs in include/linux/drm.h -DaveM */
-#include "../../../drivers/char/drm/drm.h"
-
-typedef struct drm32_version {
-	int    version_major;	  /* Major version			    */
-	int    version_minor;	  /* Minor version			    */
-	int    version_patchlevel;/* Patch level			    */
-	int    name_len;	  /* Length of name buffer		    */
-	u32    name;		  /* Name of driver			    */
-	int    date_len;	  /* Length of date buffer		    */
-	u32    date;		  /* User-space buffer to hold date	    */
-	int    desc_len;	  /* Length of desc buffer		    */
-	u32    desc;		  /* User-space buffer to hold desc	    */
-} drm32_version_t;
-#define DRM32_IOCTL_VERSION    DRM_IOWR(0x00, drm32_version_t)
-
-static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_version_t *uversion = (drm32_version_t *)arg;
-	char *name_ptr, *date_ptr, *desc_ptr;
-	u32 tmp1, tmp2, tmp3;
-	drm_version_t kversion;
-	mm_segment_t old_fs;
-	int ret;
-
-	memset(&kversion, 0, sizeof(kversion));
-	if (get_user(kversion.name_len, &uversion->name_len) ||
-	    get_user(kversion.date_len, &uversion->date_len) ||
-	    get_user(kversion.desc_len, &uversion->desc_len) ||
-	    get_user(tmp1, &uversion->name) ||
-	    get_user(tmp2, &uversion->date) ||
-	    get_user(tmp3, &uversion->desc))
-		return -EFAULT;
-
-	name_ptr = (char *) A(tmp1);
-	date_ptr = (char *) A(tmp2);
-	desc_ptr = (char *) A(tmp3);
-
-	ret = -ENOMEM;
-	if (kversion.name_len && name_ptr) {
-		kversion.name = kmalloc(kversion.name_len, GFP_KERNEL);
-		if (!kversion.name)
-			goto out;
-	}
-	if (kversion.date_len && date_ptr) {
-		kversion.date = kmalloc(kversion.date_len, GFP_KERNEL);
-		if (!kversion.date)
-			goto out;
-	}
-	if (kversion.desc_len && desc_ptr) {
-		kversion.desc = kmalloc(kversion.desc_len, GFP_KERNEL);
-		if (!kversion.desc)
-			goto out;
-	}
-
-        old_fs = get_fs();
-	set_fs(KERNEL_DS);
-        ret = sys_ioctl (fd, DRM_IOCTL_VERSION, (unsigned long)&kversion);
-        set_fs(old_fs);
-
-	if (!ret) {
-		if ((kversion.name &&
-		     copy_to_user(name_ptr, kversion.name, kversion.name_len)) ||
-		    (kversion.date &&
-		     copy_to_user(date_ptr, kversion.date, kversion.date_len)) ||
-		    (kversion.desc &&
-		     copy_to_user(desc_ptr, kversion.desc, kversion.desc_len)))
-			ret = -EFAULT;
-		if (put_user(kversion.version_major, &uversion->version_major) ||
-		    put_user(kversion.version_minor, &uversion->version_minor) ||
-		    put_user(kversion.version_patchlevel, &uversion->version_patchlevel) ||
-		    put_user(kversion.name_len, &uversion->name_len) ||
-		    put_user(kversion.date_len, &uversion->date_len) ||
-		    put_user(kversion.desc_len, &uversion->desc_len))
-			ret = -EFAULT;
-	}
-
-out:
-	kfree(kversion.name);
-	kfree(kversion.date);
-	kfree(kversion.desc);
-	return ret;
-}
-
-typedef struct drm32_unique {
-	int	unique_len;	  /* Length of unique			    */
-	u32	unique;		  /* Unique name for driver instantiation   */
-} drm32_unique_t;
-#define DRM32_IOCTL_GET_UNIQUE DRM_IOWR(0x01, drm32_unique_t)
-#define DRM32_IOCTL_SET_UNIQUE DRM_IOW( 0x10, drm32_unique_t)
-
-static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_unique_t *uarg = (drm32_unique_t *)arg;
-	drm_unique_t karg;
-	mm_segment_t old_fs;
-	char *uptr;
-	u32 tmp;
-	int ret;
-
-	if (get_user(karg.unique_len, &uarg->unique_len))
-		return -EFAULT;
-	karg.unique = NULL;
-
-	if (get_user(tmp, &uarg->unique))
-		return -EFAULT;
-
-	uptr = (char *) A(tmp);
-
-	if (uptr) {
-		karg.unique = kmalloc(karg.unique_len, GFP_KERNEL);
-		if (!karg.unique)
-			return -ENOMEM;
-		if (cmd == DRM32_IOCTL_SET_UNIQUE &&
-		    copy_from_user(karg.unique, uptr, karg.unique_len)) {
-			kfree(karg.unique);
-			return -EFAULT;
-		}
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	if (cmd == DRM32_IOCTL_GET_UNIQUE)
-		ret = sys_ioctl (fd, DRM_IOCTL_GET_UNIQUE, (unsigned long)&karg);
-	else
-		ret = sys_ioctl (fd, DRM_IOCTL_SET_UNIQUE, (unsigned long)&karg);
-        set_fs(old_fs);
-
-	if (!ret) {
-		if (cmd == DRM32_IOCTL_GET_UNIQUE &&
-		    uptr != NULL &&
-		    copy_to_user(uptr, karg.unique, karg.unique_len))
-			ret = -EFAULT;
-		if (put_user(karg.unique_len, &uarg->unique_len))
-			ret = -EFAULT;
-	}
-
-	kfree(karg.unique);
-	return ret;
-}
-
-typedef struct drm32_map {
-	u32		offset;	 /* Requested physical address (0 for SAREA)*/
-	u32		size;	 /* Requested physical size (bytes)	    */
-	drm_map_type_t	type;	 /* Type of memory to map		    */
-	drm_map_flags_t flags;	 /* Flags				    */
-	u32		handle;  /* User-space: "Handle" to pass to mmap    */
-				 /* Kernel-space: kernel-virtual address    */
-	int		mtrr;	 /* MTRR slot used			    */
-				 /* Private data			    */
-} drm32_map_t;
-#define DRM32_IOCTL_ADD_MAP    DRM_IOWR(0x15, drm32_map_t)
-
-static int drm32_addmap(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_map_t *uarg = (drm32_map_t *) arg;
-	drm_map_t karg;
-	mm_segment_t old_fs;
-	u32 tmp;
-	int ret;
-
-	ret  = get_user(karg.offset, &uarg->offset);
-	ret |= get_user(karg.size, &uarg->size);
-	ret |= get_user(karg.type, &uarg->type);
-	ret |= get_user(karg.flags, &uarg->flags);
-	ret |= get_user(tmp, &uarg->handle);
-	ret |= get_user(karg.mtrr, &uarg->mtrr);
-	if (ret)
-		return -EFAULT;
-
-	karg.handle = (void *) A(tmp);
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_ADD_MAP, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		ret  = put_user(karg.offset, &uarg->offset);
-		ret |= put_user(karg.size, &uarg->size);
-		ret |= put_user(karg.type, &uarg->type);
-		ret |= put_user(karg.flags, &uarg->flags);
-		tmp = (u32) (long)karg.handle;
-		ret |= put_user(tmp, &uarg->handle);
-		ret |= put_user(karg.mtrr, &uarg->mtrr);
-		if (ret)
-			ret = -EFAULT;
-	}
-
-	return ret;
-}
-
-typedef struct drm32_buf_info {
-	int	       count;	/* Entries in list			     */
-	u32	       list;    /* (drm_buf_desc_t *) */ 
-} drm32_buf_info_t;
-#define DRM32_IOCTL_INFO_BUFS  DRM_IOWR(0x18, drm32_buf_info_t)
-
-static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_info_t *uarg = (drm32_buf_info_t *)arg;
-	drm_buf_desc_t *ulist;
-	drm_buf_info_t karg;
-	mm_segment_t old_fs;
-	int orig_count, ret;
-	u32 tmp;
-
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp, &uarg->list))
-		return -EFAULT;
-
-	ulist = (drm_buf_desc_t *) A(tmp);
-
-	orig_count = karg.count;
-
-	karg.list = kmalloc(karg.count * sizeof(drm_buf_desc_t), GFP_KERNEL);
-	if (!karg.list)
-		return -EFAULT;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_INFO_BUFS, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		if (karg.count <= orig_count &&
-		    (copy_to_user(ulist, karg.list,
-				  karg.count * sizeof(drm_buf_desc_t))))
-			ret = -EFAULT;
-		if (put_user(karg.count, &uarg->count))
-			ret = -EFAULT;
-	}
-
-	kfree(karg.list);
-	return ret;
-}
-
-typedef struct drm32_buf_free {
-	int	       count;
-	u32	       list;	/* (int *) */
-} drm32_buf_free_t;
-#define DRM32_IOCTL_FREE_BUFS  DRM_IOW( 0x1a, drm32_buf_free_t)
-
-static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_free_t *uarg = (drm32_buf_free_t *)arg;
-	drm_buf_free_t karg;
-	mm_segment_t old_fs;
-	int *ulist;
-	int ret;
-	u32 tmp;
-
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp, &uarg->list))
-		return -EFAULT;
-
-	ulist = (int *) A(tmp);
-
-	karg.list = kmalloc(karg.count * sizeof(int), GFP_KERNEL);
-	if (!karg.list)
-		return -ENOMEM;
-
-	ret = -EFAULT;
-	if (copy_from_user(karg.list, ulist, (karg.count * sizeof(int))))
-		goto out;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_FREE_BUFS, (unsigned long) &karg);
-	set_fs(old_fs);
-
-out:
-	kfree(karg.list);
-	return ret;
-}
-
-typedef struct drm32_buf_pub {
-	int		  idx;	       /* Index into master buflist	     */
-	int		  total;       /* Buffer size			     */
-	int		  used;	       /* Amount of buffer in use (for DMA)  */
-	u32		  address;     /* Address of buffer (void *)	     */
-} drm32_buf_pub_t;
-
-typedef struct drm32_buf_map {
-	int	      count;	/* Length of buflist			    */
-	u32	      virtual;	/* Mmaped area in user-virtual (void *)	    */
-	u32 	      list;	/* Buffer information (drm_buf_pub_t *)	    */
-} drm32_buf_map_t;
-#define DRM32_IOCTL_MAP_BUFS   DRM_IOWR(0x19, drm32_buf_map_t)
-
-static int drm32_map_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_map_t *uarg = (drm32_buf_map_t *)arg;
-	drm32_buf_pub_t *ulist;
-	drm_buf_map_t karg;
-	mm_segment_t old_fs;
-	int orig_count, ret, i;
-	u32 tmp1, tmp2;
-
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp1, &uarg->virtual) ||
-	    get_user(tmp2, &uarg->list))
-		return -EFAULT;
-
-	karg.virtual = (void *) A(tmp1);
-	ulist = (drm32_buf_pub_t *) A(tmp2);
-
-	orig_count = karg.count;
-
-	karg.list = kmalloc(karg.count * sizeof(drm_buf_pub_t), GFP_KERNEL);
-	if (!karg.list)
-		return -ENOMEM;
-
-	ret = -EFAULT;
-	for (i = 0; i < karg.count; i++) {
-		if (get_user(karg.list[i].idx, &ulist[i].idx) ||
-		    get_user(karg.list[i].total, &ulist[i].total) ||
-		    get_user(karg.list[i].used, &ulist[i].used) ||
-		    get_user(tmp1, &ulist[i].address))
-			goto out;
-
-		karg.list[i].address = (void *) A(tmp1);
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_MAP_BUFS, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		for (i = 0; i < orig_count; i++) {
-			tmp1 = (u32) (long) karg.list[i].address;
-			if (put_user(karg.list[i].idx, &ulist[i].idx) ||
-			    put_user(karg.list[i].total, &ulist[i].total) ||
-			    put_user(karg.list[i].used, &ulist[i].used) ||
-			    put_user(tmp1, &ulist[i].address)) {
-				ret = -EFAULT;
-				goto out;
-			}
-		}
-		if (put_user(karg.count, &uarg->count))
-			ret = -EFAULT;
-	}
-
-out:
-	kfree(karg.list);
-	return ret;
-}
-
-typedef struct drm32_dma {
-				/* Indices here refer to the offset into
-				   buflist in drm_buf_get_t.  */
-	int		context;	  /* Context handle		    */
-	int		send_count;	  /* Number of buffers to send	    */
-	u32		send_indices;	  /* List of handles to buffers (int *) */
-	u32		send_sizes;	  /* Lengths of data to send (int *) */
-	drm_dma_flags_t flags;		  /* Flags			    */
-	int		request_count;	  /* Number of buffers requested    */
-	int		request_size;	  /* Desired size for buffers	    */
-	u32		request_indices;  /* Buffer information (int *)	    */
-	u32		request_sizes;    /* (int *) */
-	int		granted_count;	  /* Number of buffers granted	    */
-} drm32_dma_t;
-#define DRM32_IOCTL_DMA	     DRM_IOWR(0x29, drm32_dma_t)
-
-/* RED PEN	The DRM layer blindly dereferences the send/request
- * 		indice/size arrays even though they are userland
- * 		pointers.  -DaveM
- */
-static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_dma_t *uarg = (drm32_dma_t *) arg;
-	int *u_si, *u_ss, *u_ri, *u_rs;
-	drm_dma_t karg;
-	mm_segment_t old_fs;
-	int ret;
-	u32 tmp1, tmp2, tmp3, tmp4;
-
-	karg.send_indices = karg.send_sizes = NULL;
-	karg.request_indices = karg.request_sizes = NULL;
-
-	if (get_user(karg.context, &uarg->context) ||
-	    get_user(karg.send_count, &uarg->send_count) ||
-	    get_user(tmp1, &uarg->send_indices) ||
-	    get_user(tmp2, &uarg->send_sizes) ||
-	    get_user(karg.flags, &uarg->flags) ||
-	    get_user(karg.request_count, &uarg->request_count) ||
-	    get_user(karg.request_size, &uarg->request_size) ||
-	    get_user(tmp3, &uarg->request_indices) ||
-	    get_user(tmp4, &uarg->request_sizes) ||
-	    get_user(karg.granted_count, &uarg->granted_count))
-		return -EFAULT;
-
-	u_si = (int *) A(tmp1);
-	u_ss = (int *) A(tmp2);
-	u_ri = (int *) A(tmp3);
-	u_rs = (int *) A(tmp4);
-
-	if (karg.send_count) {
-		karg.send_indices = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL);
-		karg.send_sizes = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL);
-
-		ret = -ENOMEM;
-		if (!karg.send_indices || !karg.send_sizes)
-			goto out;
-
-		ret = -EFAULT;
-		if (copy_from_user(karg.send_indices, u_si,
-				   (karg.send_count * sizeof(int))) ||
-		    copy_from_user(karg.send_sizes, u_ss,
-				   (karg.send_count * sizeof(int))))
-			goto out;
-	}
-
-	if (karg.request_count) {
-		karg.request_indices = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL);
-		karg.request_sizes = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL);
-
-		ret = -ENOMEM;
-		if (!karg.request_indices || !karg.request_sizes)
-			goto out;
-
-		ret = -EFAULT;
-		if (copy_from_user(karg.request_indices, u_ri,
-				   (karg.request_count * sizeof(int))) ||
-		    copy_from_user(karg.request_sizes, u_rs,
-				   (karg.request_count * sizeof(int))))
-			goto out;
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_DMA, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		if (put_user(karg.context, &uarg->context) ||
-		    put_user(karg.send_count, &uarg->send_count) ||
-		    put_user(karg.flags, &uarg->flags) ||
-		    put_user(karg.request_count, &uarg->request_count) ||
-		    put_user(karg.request_size, &uarg->request_size) ||
-		    put_user(karg.granted_count, &uarg->granted_count))
-			ret = -EFAULT;
-
-		if (karg.send_count) {
-			if (copy_to_user(u_si, karg.send_indices,
-					 (karg.send_count * sizeof(int))) ||
-			    copy_to_user(u_ss, karg.send_sizes,
-					 (karg.send_count * sizeof(int))))
-				ret = -EFAULT;
-		}
-		if (karg.request_count) {
-			if (copy_to_user(u_ri, karg.request_indices,
-					 (karg.request_count * sizeof(int))) ||
-			    copy_to_user(u_rs, karg.request_sizes,
-					 (karg.request_count * sizeof(int))))
-				ret = -EFAULT;
-		}
-	}
-
-out:
-	kfree(karg.send_indices);
-	kfree(karg.send_sizes);
-	kfree(karg.request_indices);
-	kfree(karg.request_sizes);
-	return ret;
-}
-
-typedef struct drm32_ctx_res {
-	int		count;
-	u32		contexts; /* (drm_ctx_t *) */
-} drm32_ctx_res_t;
-#define DRM32_IOCTL_RES_CTX    DRM_IOWR(0x26, drm32_ctx_res_t)
-
-static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_ctx_res_t *uarg = (drm32_ctx_res_t *) arg;
-	drm_ctx_t *ulist;
-	drm_ctx_res_t karg;
-	mm_segment_t old_fs;
-	int orig_count, ret;
-	u32 tmp;
-
-	karg.contexts = NULL;
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp, &uarg->contexts))
-		return -EFAULT;
-
-	ulist = (drm_ctx_t *) A(tmp);
-
-	orig_count = karg.count;
-	if (karg.count && ulist) {
-		karg.contexts = kmalloc((karg.count * sizeof(drm_ctx_t)), GFP_KERNEL);
-		if (!karg.contexts)
-			return -ENOMEM;
-		if (copy_from_user(karg.contexts, ulist,
-				   (karg.count * sizeof(drm_ctx_t)))) {
-			kfree(karg.contexts);
-			return -EFAULT;
-		}
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_RES_CTX, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		if (orig_count) {
-			if (copy_to_user(ulist, karg.contexts,
-					 (orig_count * sizeof(drm_ctx_t))))
-				ret = -EFAULT;
-		}
-		if (put_user(karg.count, &uarg->count))
-			ret = -EFAULT;
-	}
-
-	kfree(karg.contexts);
-	return ret;
-}
-
-#endif
-
 #define HANDLE_IOCTL(cmd, handler) { cmd, (ioctl_trans_handler_t)handler, NULL },
 #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd, sys_ioctl) 
 
@@ -561,11 +31,6 @@ IOCTL_TABLE_START
 #define DECLARES
 #include "compat_ioctl.c"
 
-/* PA-specific ioctls */
-COMPATIBLE_IOCTL(PA_PERF_ON)
-COMPATIBLE_IOCTL(PA_PERF_OFF)
-COMPATIBLE_IOCTL(PA_PERF_VERSION)
-
 /* And these ioctls need translation */
 HANDLE_IOCTL(SIOCGPPPSTATS, dev_ifsioc)
 HANDLE_IOCTL(SIOCGPPPCSTATS, dev_ifsioc)
@@ -590,17 +55,6 @@ HANDLE_IOCTL(RTC_EPOCH_READ, w_long)
 COMPATIBLE_IOCTL(RTC_EPOCH_SET)
 #endif
 
-#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE)
-HANDLE_IOCTL(DRM32_IOCTL_VERSION, drm32_version);
-HANDLE_IOCTL(DRM32_IOCTL_GET_UNIQUE, drm32_getsetunique);
-HANDLE_IOCTL(DRM32_IOCTL_SET_UNIQUE, drm32_getsetunique);
-HANDLE_IOCTL(DRM32_IOCTL_ADD_MAP, drm32_addmap);
-HANDLE_IOCTL(DRM32_IOCTL_INFO_BUFS, drm32_info_bufs);
-HANDLE_IOCTL(DRM32_IOCTL_FREE_BUFS, drm32_free_bufs);
-HANDLE_IOCTL(DRM32_IOCTL_MAP_BUFS, drm32_map_bufs);
-HANDLE_IOCTL(DRM32_IOCTL_DMA, drm32_dma);
-HANDLE_IOCTL(DRM32_IOCTL_RES_CTX, drm32_res_ctx);
-#endif /* DRM */
 IOCTL_TABLE_END
 
 int ioctl_table_size = ARRAY_SIZE(ioctl_start);

arch/parisc/kernel/irq.c

@@ -30,6 +30,9 @@
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
+#include <asm/io.h>
+
+#include <asm/smp.h>
 
 #undef PARISC_IRQ_CR16_COUNTS
 
@@ -43,26 +46,34 @@ extern irqreturn_t ipi_interrupt(int, void *, struct pt_regs *);
 */
 static volatile unsigned long cpu_eiem = 0;
 
-static void cpu_set_eiem(void *info)
-{
-	set_eiem((unsigned long) info);
-}
-
-static inline void cpu_disable_irq(unsigned int irq)
+static void cpu_disable_irq(unsigned int irq)
 {
 	unsigned long eirr_bit = EIEM_MASK(irq);
 
 	cpu_eiem &= ~eirr_bit;
-        on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1);
+	/* Do nothing on the other CPUs.  If they get this interrupt,
+	 * The & cpu_eiem in the do_cpu_irq_mask() ensures they won't
+	 * handle it, and the set_eiem() at the bottom will ensure it
+	 * then gets disabled */
 }
 
 static void cpu_enable_irq(unsigned int irq)
 {
 	unsigned long eirr_bit = EIEM_MASK(irq);
 
-	mtctl(eirr_bit, 23);	/* clear EIRR bit before unmasking */
 	cpu_eiem |= eirr_bit;
-        on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1);
+
+	/* FIXME: while our interrupts aren't nested, we cannot reset
+	 * the eiem mask if we're already in an interrupt.  Once we
+	 * implement nested interrupts, this can go away
+	 */
+	if (!in_interrupt())
+		set_eiem(cpu_eiem);
+
+	/* This is just a simple NOP IPI.  But what it does is cause
+	 * all the other CPUs to do a set_eiem(cpu_eiem) at the end
+	 * of the interrupt handler */
+	smp_send_all_nop();
 }
 
 static unsigned int cpu_startup_irq(unsigned int irq)
@@ -74,6 +85,35 @@ static unsigned int cpu_startup_irq(unsigned int irq)
 void no_ack_irq(unsigned int irq) { }
 void no_end_irq(unsigned int irq) { }
 
+#ifdef CONFIG_SMP
+int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
+{
+	int cpu_dest;
+
+	/* timer and ipi have to always be received on all CPUs */
+	if (irq == TIMER_IRQ || irq == IPI_IRQ) {
+		/* Bad linux design decision.  The mask has already
+		 * been set; we must reset it */
+		irq_affinity[irq] = CPU_MASK_ALL;
+		return -EINVAL;
+	}
+
+	/* whatever mask they set, we just allow one CPU */
+	cpu_dest = first_cpu(*dest);
+	*dest = cpumask_of_cpu(cpu_dest);
+
+	return 0;
+}
+
+static void cpu_set_affinity_irq(unsigned int irq, cpumask_t dest)
+{
+	if (cpu_check_affinity(irq, &dest))
+		return;
+
+	irq_affinity[irq] = dest;
+}
+#endif
+
 static struct hw_interrupt_type cpu_interrupt_type = {
 	.typename	= "CPU",
 	.startup	= cpu_startup_irq,
@@ -82,7 +122,9 @@ static struct hw_interrupt_type cpu_interrupt_type = {
 	.disable	= cpu_disable_irq,
 	.ack		= no_ack_irq,
 	.end		= no_end_irq,
-//	.set_affinity	= cpu_set_affinity_irq,
+#ifdef CONFIG_SMP
+	.set_affinity	= cpu_set_affinity_irq,
+#endif
 };
 
 int show_interrupts(struct seq_file *p, void *v)
@@ -219,6 +261,17 @@ int txn_alloc_irq(unsigned int bits_wide)
 	return -1;
 }
 
+
+unsigned long txn_affinity_addr(unsigned int irq, int cpu)
+{
+#ifdef CONFIG_SMP
+	irq_affinity[irq] = cpumask_of_cpu(cpu);
+#endif
+
+	return cpu_data[cpu].txn_addr;
+}
+
+
 unsigned long txn_alloc_addr(unsigned int virt_irq)
 {
 	static int next_cpu = -1;
@@ -233,7 +286,7 @@ unsigned long txn_alloc_addr(unsigned int virt_irq)
 	if (next_cpu >= NR_CPUS) 
 		next_cpu = 0;	/* nothing else, assign monarch */
 
-	return cpu_data[next_cpu].txn_addr;
+	return txn_affinity_addr(virt_irq, next_cpu);
 }
 
 
@@ -250,10 +303,11 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	irq_enter();
 
 	/*
-	 * Only allow interrupt processing to be interrupted by the
-	 * timer tick
+	 * Don't allow TIMER or IPI nested interrupts.
+	 * Allowing any single interrupt to nest can lead to that CPU
+	 * handling interrupts with all enabled interrupts unmasked.
 	 */
-	set_eiem(EIEM_MASK(TIMER_IRQ));
+	set_eiem(0UL);
 
 	/* 1) only process IRQs that are enabled/unmasked (cpu_eiem)
 	 * 2) We loop here on EIRR contents in order to avoid
@@ -267,23 +321,41 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 		if (!eirr_val)
 			break;
 
-		if (eirr_val & EIEM_MASK(TIMER_IRQ))
-			set_eiem(0);
-
 		mtctl(eirr_val, 23); /* reset bits we are going to process */
 
 		/* Work our way from MSb to LSb...same order we alloc EIRs */
 		for (irq = TIMER_IRQ; eirr_val && bit; bit>>=1, irq++) {
+#ifdef CONFIG_SMP
+			cpumask_t dest = irq_affinity[irq];
+#endif
 			if (!(bit & eirr_val))
 				continue;
 
 			/* clear bit in mask - can exit loop sooner */
 			eirr_val &= ~bit;
 
+#ifdef CONFIG_SMP
+			/* FIXME: because generic set affinity mucks
+			 * with the affinity before sending it to us
+			 * we can get the situation where the affinity is
+			 * wrong for our CPU type interrupts */
+			if (irq != TIMER_IRQ && irq != IPI_IRQ &&
+			    !cpu_isset(smp_processor_id(), dest)) {
+				int cpu = first_cpu(dest);
+
+				printk(KERN_DEBUG "redirecting irq %d from CPU %d to %d\n",
+				       irq, smp_processor_id(), cpu);
+				gsc_writel(irq + CPU_IRQ_BASE,
+					   cpu_data[cpu].hpa);
+				continue;
+			}
+#endif
+
 			__do_IRQ(irq, regs);
 		}
 	}
-	set_eiem(cpu_eiem);
+
+	set_eiem(cpu_eiem);	/* restore original mask */
 	irq_exit();
 }
 
@@ -291,12 +363,14 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 static struct irqaction timer_action = {
 	.handler = timer_interrupt,
 	.name = "timer",
+	.flags = SA_INTERRUPT,
 };
 
 #ifdef CONFIG_SMP
 static struct irqaction ipi_action = {
 	.handler = ipi_interrupt,
 	.name = "IPI",
+	.flags = SA_INTERRUPT,
 };
 #endif
 

arch/parisc/kernel/perf.c

@@ -196,8 +196,7 @@ static int perf_open(struct inode *inode, struct file *file);
 static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos);
 static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, 
 	loff_t *ppos);
-static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg);
+static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static void perf_start_counters(void);
 static int perf_stop_counters(uint32_t *raddr);
 static struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num);
@@ -438,48 +437,56 @@ static void perf_patch_images(void)
  * must be running on the processor that you wish to change.
  */
 
-static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
+static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long error_start;
-	uint32_t raddr[4];	
+	uint32_t raddr[4];
+	int error = 0;
 
+	lock_kernel();
 	switch (cmd) {
 
 	    case PA_PERF_ON:
 			/* Start the counters */
 			perf_start_counters();
-			return 0;
+			break;
 
 	    case PA_PERF_OFF:
 			error_start = perf_stop_counters(raddr);
 			if (error_start != 0) {
 				printk(KERN_ERR "perf_off: perf_stop_counters = %ld\n", error_start);
-				return -EFAULT;	
+				error = -EFAULT;
+				break;
 			}
 
 			/* copy out the Counters */
 			if (copy_to_user((void __user *)arg, raddr, 
 					sizeof (raddr)) != 0) {
-				return -EFAULT;
+				error =  -EFAULT;
+				break;
 			}
-			return 0;
+			break;
 
 	    case PA_PERF_VERSION:
   	  		/* Return the version # */
-			return put_user(PERF_VERSION, (int *)arg);
+			error = put_user(PERF_VERSION, (int *)arg);
+			break;
 
 	    default:
-  	 		break;
+  	 		error = -ENOTTY;
 	}
-	return -ENOTTY;
+
+	unlock_kernel();
+
+	return error;
 }
 
 static struct file_operations perf_fops = {
 	.llseek = no_llseek,
 	.read = perf_read,
 	.write = perf_write,
-	.ioctl = perf_ioctl,
+	.unlocked_ioctl = perf_ioctl,
+	.compat_ioctl = perf_ioctl,
 	.open = perf_open,
 	.release = perf_release
 };

arch/parisc/kernel/ptrace.c

@@ -264,6 +264,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		 * sigkill.  perhaps it should be put in the status
 		 * that it wants to exit.
 		 */
+		ret = 0;
 		DBG("sys_ptrace(KILL)\n");
 		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
 			goto out_tsk;
@@ -344,11 +345,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 	case PTRACE_GETEVENTMSG:
                 ret = put_user(child->ptrace_message, (unsigned int __user *) data);
-		goto out;
+		goto out_tsk;
 
 	default:
 		ret = ptrace_request(child, request, addr, data);
-		goto out;
+		goto out_tsk;
 	}
 
 out_wake_notrap:

arch/parisc/kernel/signal.c

@@ -296,7 +296,6 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	unsigned long rp, usp;
 	unsigned long haddr, sigframe_size;
-	struct siginfo si;
 	int err = 0;
 #ifdef __LP64__
 	compat_int_t compat_val;

arch/parisc/kernel/smp.c

@@ -181,12 +181,19 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		while (ops) {
 			unsigned long which = ffz(~ops);
 
+			ops &= ~(1 << which);
+
 			switch (which) {
+			case IPI_NOP:
+#if (kDEBUG>=100)
+				printk(KERN_DEBUG "CPU%d IPI_NOP\n",this_cpu);
+#endif /* kDEBUG */
+				break;
+				
 			case IPI_RESCHEDULE:
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_RESCHEDULE\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_RESCHEDULE);
 				/*
 				 * Reschedule callback.  Everything to be
 				 * done is done by the interrupt return path.
@@ -197,7 +204,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_CALL_FUNC\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CALL_FUNC);
 				{
 					volatile struct smp_call_struct *data;
 					void (*func)(void *info);
@@ -231,7 +237,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_CPU_START\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CPU_START);
 #ifdef ENTRY_SYS_CPUS
 				p->state = STATE_RUNNING;
 #endif
@@ -241,7 +246,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_CPU_STOP\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CPU_STOP);
 #ifdef ENTRY_SYS_CPUS
 #else
 				halt_processor();
@@ -252,13 +256,11 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d is alive!\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CPU_TEST);
 				break;
 
 			default:
 				printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n",
 					this_cpu, which);
-				ops &= ~(1 << which);
 				return IRQ_NONE;
 			} /* Switch */
 		} /* while (ops) */
@@ -312,6 +314,12 @@ smp_send_start(void)	{ send_IPI_allbutself(IPI_CPU_START); }
 void 
 smp_send_reschedule(int cpu) { send_IPI_single(cpu, IPI_RESCHEDULE); }
 
+void
+smp_send_all_nop(void)
+{
+	send_IPI_allbutself(IPI_NOP);
+}
+
 
 /**
  * Run a function on all other CPUs.
@@ -338,6 +346,10 @@ smp_call_function (void (*func) (void *info), void *info, int retry, int wait)
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
+
+	/* can also deadlock if IPIs are disabled */
+	WARN_ON((get_eiem() & (1UL<<(CPU_IRQ_MAX - IPI_IRQ))) == 0);
+
 	
 	data.func = func;
 	data.info = info;

arch/parisc/kernel/syscall.S

@@ -164,7 +164,7 @@ linux_gateway_entry:
 #endif
 	STREG	%r2,  TASK_PT_GR30(%r1)		/* ... and save it */
 	
-	STREG	%r20, TASK_PT_GR20(%r1)
+	STREG	%r20, TASK_PT_GR20(%r1)		/* Syscall number */
 	STREG	%r21, TASK_PT_GR21(%r1)
 	STREG	%r22, TASK_PT_GR22(%r1)
 	STREG	%r23, TASK_PT_GR23(%r1)		/* 4th argument */
@@ -527,6 +527,7 @@ lws_compare_and_swap:
 		We *must* giveup this call and fail.
 	*/
 	ldw	4(%sr2,%r20), %r28			/* Load thread register */
+	/* WARNING: If cr27 cycles to the same value we have problems */
 	mfctl	%cr27, %r21				/* Get current thread register */
 	cmpb,<>,n	%r21, %r28, cas_lock		/* Called recursive? */
 	b	lws_exit				/* Return error! */