Staging: rt2870: prepare for rt{28,30}70/sta/*.[ch] merge

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt2870/sta/assoc.c

@@ -454,6 +454,11 @@ VOID MlmeAssocReqAction(
 				RSNIe = IE_WPA2;
 			}
 
+#ifdef RT30xx
+#ifdef SIOCSIWGENIE
+			if (pAd->StaCfg.WpaSupplicantUP != 1)
+#endif // SIOCSIWGENIE //
+#endif
             	RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, BSS0);
 
             // Check for WPA PMK cache list
@@ -480,6 +485,17 @@ VOID MlmeAssocReqAction(
 				}
 			}
 
+#ifdef RT30xx
+#ifdef SIOCSIWGENIE
+			if (pAd->StaCfg.WpaSupplicantUP == 1)
+			{
+				MakeOutgoingFrame(pOutBuffer + FrameLen,    		&tmp,
+		                        	pAd->StaCfg.RSNIE_Len,			pAd->StaCfg.RSN_IE,
+		                        	END_OF_ARGS);
+			}
+			else
+#endif
+#endif
 			{
 				MakeOutgoingFrame(pOutBuffer + FrameLen,    		&tmp,
 				              		1,                              &RSNIe,
@@ -490,6 +506,11 @@ VOID MlmeAssocReqAction(
 
 			FrameLen += tmp;
 
+#ifdef RT30xx
+#ifdef SIOCSIWGENIE
+			if (pAd->StaCfg.WpaSupplicantUP != 1)
+#endif
+#endif
 			{
 	            // Append Variable IE
 	            NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, &RSNIe, 1);

drivers/staging/rt2870/sta/connect.c

@@ -1133,6 +1133,20 @@ VOID LinkUp(
 		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
 		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
 
+#ifdef RT30xx
+		if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
+			(pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE))
+		{
+			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel + 2;
+		}
+		else if ((pAd->CommonCfg.Channel > 2) &&
+				 (pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth  == BW_40) &&
+				 (pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW))
+		{
+			pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel - 2;
+		}
+#endif
+
 		if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
 			AdhocTurnOnQos(pAd);
 
@@ -1514,6 +1528,9 @@ VOID LinkUp(
 		pAd->MacTab.Size = 1;	// infra mode always set MACtab size =1.
 		pAd->MacTab.Content[BSSID_WCID].Sst = SST_ASSOC;
 		pAd->MacTab.Content[BSSID_WCID].AuthState = SST_ASSOC;
+#ifdef RT30xx
+		pAd->MacTab.Content[BSSID_WCID].AuthMode = pAd->StaCfg.AuthMode;
+#endif
 		pAd->MacTab.Content[BSSID_WCID].WepStatus = pAd->StaCfg.WepStatus;
         NdisReleaseSpinLock(&pAd->MacTabLock);
 
@@ -1637,8 +1654,15 @@ VOID LinkUp(
 	// Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable
 	//
 	// if 1. Legacy AP WMM on,  or 2. 11n AP, AMPDU disable.  Force turn off burst no matter what bEnableTxBurst is.
+#ifdef RT30xx
+	if (!((pAd->CommonCfg.RxStream == 1)&&(pAd->CommonCfg.TxStream == 1)) &&
+		(((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
+		|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))))
+#endif
+#ifndef RT30xx
 	if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
 		|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE)))
+#endif
 	{
 		RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &Data);
 		Data  &= 0xFFFFFF00;
@@ -1977,6 +2001,22 @@ VOID LinkDown(
 		memset(wrqu.ap_addr.sa_data, 0, MAC_ADDR_LEN);
 		wireless_send_event(pAd->net_dev, SIOCGIWAP, &wrqu, NULL);
 	}
+
+#ifdef RT30xx
+	if (IS_RT3090(pAd))
+	{
+		UINT32				macdata;
+		// disable MMPS BBP control register
+		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &ByteValue);
+		ByteValue &= ~(0x04);	//bit 2
+		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, ByteValue);
+
+		// disable MMPS MAC control register
+		RTMP_IO_READ32(pAd, 0x1210, &macdata);
+		macdata &= ~(0x09);	//bit 0, 3
+		RTMP_IO_WRITE32(pAd, 0x1210, macdata);
+	}
+#endif // RT30xx //
 }
 
 /*

drivers/staging/rt2870/sta/rtmp_data.c

@@ -559,7 +559,13 @@ VOID STAHandleRxMgmtFrame(
 	{
 
 		// We should collect RSSI not only U2M data but also my beacon
+#ifdef RT30xx
+		if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))
+			&& (pAd->RxAnt.EvaluatePeriod == 0))
+#endif
+#ifndef RT30xx
 		if ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2)))
+#endif
 		{
 			Update_Rssi_Sample(pAd, &pAd->StaCfg.RssiSample, pRxWI);
 
@@ -567,6 +573,18 @@ VOID STAHandleRxMgmtFrame(
 			pAd->StaCfg.LastSNR1 = (UCHAR)(pRxWI->SNR1);
 		}
 
+#ifdef RT30xx
+		// collect rssi information for antenna diversity
+		if (pAd->NicConfig2.field.AntDiversity)
+		{
+			if ((pRxD->U2M) || ((pHeader->FC.SubType == SUBTYPE_BEACON) && (MAC_ADDR_EQUAL(&pAd->CommonCfg.Bssid, &pHeader->Addr2))))
+			{
+					COLLECT_RX_ANTENNA_AVERAGE_RSSI(pAd, ConvertToRssi(pAd, (UCHAR)pRxWI->RSSI0, RSSI_0), 0); //Note: RSSI2 not used on RT73
+					pAd->StaCfg.NumOfAvgRssiSample ++;
+			}
+		}
+#endif // RT30xx //
+
 		// First check the size, it MUST not exceed the mlme queue size
 		if (pRxWI->MPDUtotalByteCount > MGMT_DMA_BUFFER_SIZE)
 		{

drivers/staging/rt2870/sta/sync.c

@@ -1061,6 +1061,10 @@ VOID PeerBeacon(
 			// Add the safeguard against the mismatch of adhoc wep status
 			if (pAd->StaCfg.WepStatus != pAd->ScanTab.BssEntry[Bssidx].WepStatus)
 			{
+#ifdef RT30xx
+				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - Not matched wep status %d %d\n", pAd->StaCfg.WepStatus, pAd->ScanTab.BssEntry[Bssidx].WepStatus));
+				DBGPRINT(RT_DEBUG_TRACE, ("bssid=%s\n", pAd->ScanTab.BssEntry[Bssidx].Bssid));
+#endif
 				return;
 			}
 

drivers/staging/rt2870/sta/wpa.c

@@ -1384,10 +1384,12 @@ VOID	WpaGroupMsg1Action(
 			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
 		else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
 			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
+#ifndef RT30xx
 		else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled)
 			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64;
 		else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
 			pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128;
+#endif
 
     	//hex_dump("Group Key :", pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].Key, LEN_TKIP_EK);
 	}
@@ -1764,7 +1766,12 @@ BOOLEAN ParseKeyData(
 	// Get GTK length - refer to IEEE 802.11i-2004 p.82
 	GTKLEN = pKDE->Len -6;
 
+#ifdef RT30xx
+	if (GTKLEN < LEN_AES_KEY)
+#endif
+#ifndef RT30xx
 	if (GTKLEN < MIN_LEN_OF_GTK)
+#endif
 	{
 		DBGPRINT(RT_DEBUG_ERROR, ("ERROR: GTK Key length is too short (%d) \n", GTKLEN));
         return FALSE;
@@ -1790,10 +1797,12 @@ BOOLEAN ParseKeyData(
 		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_TKIP;
 	else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled)
 		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_AES;
+#ifndef RT30xx
 	else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled)
 		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP64;
 	else if (pAd->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
 		pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg = CIPHER_WEP128;
+#endif
 
 	return TRUE;