ALSA: snd-usb-caiaq: Add support for Maschine

This adds partial support for the Maschine controller by Native Instruments.
Supported now are the 1x1 MIDI interface and the 41 buttons, 11 endless
rotary encoders, and 16 pressure-sensitive drum pads. Still to work on are the
dimmable LEDs and the two monochrome screens.

Signed-off-by: William Light <wrl@illest.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/usb/Kconfig

@@ -67,6 +67,7 @@ config SND_USB_CAIAQ
 	    * Native Instruments Guitar Rig mobile
 	    * Native Instruments Traktor Kontrol X1
 	    * Native Instruments Traktor Kontrol S4
+	    * Native Instruments Maschine Controller
 
 	   To compile this driver as a module, choose M here: the module
 	   will be called snd-usb-caiaq.
@@ -85,6 +86,7 @@ config SND_USB_CAIAQ_INPUT
 	   * Native Instruments Kore Controller 2
 	   * Native Instruments Audio Kontrol 1
 	   * Native Instruments Traktor Kontrol S4
+	   * Native Instruments Maschine Controller
 
 config SND_USB_US122L
 	tristate "Tascam US-122L USB driver"

sound/usb/caiaq/device.c

@@ -50,7 +50,8 @@ MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, Session I/O},"
 			 "{Native Instruments, GuitarRig mobile}"
 			 "{Native Instruments, Traktor Kontrol X1}"
-			 "{Native Instruments, Traktor Kontrol S4}");
+			 "{Native Instruments, Traktor Kontrol S4}"
+			 "{Native Instruments, Maschine Controller}");
 
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
 static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
@@ -146,6 +147,11 @@ static struct usb_device_id snd_usb_id_table[] = {
 		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
 		.idProduct =    USB_PID_TRAKTORAUDIO2
 	},
+	{
+		.match_flags =  USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
+		.idProduct =    USB_PID_MASCHINECONTROLLER
+	},
 	{ /* terminator */ }
 };
 

sound/usb/caiaq/device.h

@@ -18,6 +18,7 @@
 #define USB_PID_TRAKTORKONTROLX1	0x2305
 #define USB_PID_TRAKTORKONTROLS4	0xbaff
 #define USB_PID_TRAKTORAUDIO2		0x041d
+#define USB_PID_MASCHINECONTROLLER  0x0808
 
 #define EP1_BUFSIZE 64
 #define EP4_BUFSIZE 512

sound/usb/caiaq/input.c

@@ -67,6 +67,61 @@ static unsigned short keycode_kore[] = {
 	KEY_BRL_DOT5
 };
 
+#define MASCHINE_BUTTONS   (42)
+#define MASCHINE_BUTTON(X) ((X) + BTN_MISC)
+#define MASCHINE_PADS      (16)
+#define MASCHINE_PAD(X)    ((X) + ABS_PRESSURE)
+
+static unsigned short keycode_maschine[] = {
+	MASCHINE_BUTTON(40), /* mute       */
+	MASCHINE_BUTTON(39), /* solo       */
+	MASCHINE_BUTTON(38), /* select     */
+	MASCHINE_BUTTON(37), /* duplicate  */
+	MASCHINE_BUTTON(36), /* navigate   */
+	MASCHINE_BUTTON(35), /* pad mode   */
+	MASCHINE_BUTTON(34), /* pattern    */
+	MASCHINE_BUTTON(33), /* scene      */
+	KEY_RESERVED, /* spacer */
+
+	MASCHINE_BUTTON(30), /* rec        */
+	MASCHINE_BUTTON(31), /* erase      */
+	MASCHINE_BUTTON(32), /* shift      */
+	MASCHINE_BUTTON(28), /* grid       */
+	MASCHINE_BUTTON(27), /* >          */
+	MASCHINE_BUTTON(26), /* <          */
+	MASCHINE_BUTTON(25), /* restart    */
+
+	MASCHINE_BUTTON(21), /* E          */
+	MASCHINE_BUTTON(22), /* F          */
+	MASCHINE_BUTTON(23), /* G          */
+	MASCHINE_BUTTON(24), /* H          */
+	MASCHINE_BUTTON(20), /* D          */
+	MASCHINE_BUTTON(19), /* C          */
+	MASCHINE_BUTTON(18), /* B          */
+	MASCHINE_BUTTON(17), /* A          */
+
+	MASCHINE_BUTTON(0),  /* control    */
+	MASCHINE_BUTTON(2),  /* browse     */
+	MASCHINE_BUTTON(4),  /* <          */
+	MASCHINE_BUTTON(6),  /* snap       */
+	MASCHINE_BUTTON(7),  /* autowrite  */
+	MASCHINE_BUTTON(5),  /* >          */
+	MASCHINE_BUTTON(3),  /* sampling   */
+	MASCHINE_BUTTON(1),  /* step       */
+
+	MASCHINE_BUTTON(15), /* 8 softkeys */
+	MASCHINE_BUTTON(14),
+	MASCHINE_BUTTON(13),
+	MASCHINE_BUTTON(12),
+	MASCHINE_BUTTON(11),
+	MASCHINE_BUTTON(10),
+	MASCHINE_BUTTON(9),
+	MASCHINE_BUTTON(8),
+
+	MASCHINE_BUTTON(16), /* note repeat */
+	MASCHINE_BUTTON(29)  /* play        */
+};
+
 #define KONTROLX1_INPUTS	(40)
 #define KONTROLS4_BUTTONS	(12 * 8)
 #define KONTROLS4_AXIS		(46)
@@ -218,6 +273,29 @@ static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev,
 		input_report_abs(input_dev, ABS_HAT3Y, i);
 		input_sync(input_dev);
 		break;
+
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
+		/* 4 under the left screen */
+		input_report_abs(input_dev, ABS_HAT0X, decode_erp(buf[21], buf[20]));
+		input_report_abs(input_dev, ABS_HAT0Y, decode_erp(buf[15], buf[14]));
+		input_report_abs(input_dev, ABS_HAT1X, decode_erp(buf[9],  buf[8]));
+		input_report_abs(input_dev, ABS_HAT1Y, decode_erp(buf[3],  buf[2]));
+
+		/* 4 under the right screen */
+		input_report_abs(input_dev, ABS_HAT2X, decode_erp(buf[19], buf[18]));
+		input_report_abs(input_dev, ABS_HAT2Y, decode_erp(buf[13], buf[12]));
+		input_report_abs(input_dev, ABS_HAT3X, decode_erp(buf[7],  buf[6]));
+		input_report_abs(input_dev, ABS_HAT3Y, decode_erp(buf[1],  buf[0]));
+
+		/* volume */
+		input_report_abs(input_dev, ABS_RX, decode_erp(buf[17], buf[16]));
+		/* tempo */
+		input_report_abs(input_dev, ABS_RY, decode_erp(buf[11], buf[10]));
+		/* swing */
+		input_report_abs(input_dev, ABS_RZ, decode_erp(buf[5],  buf[4]));
+
+		input_sync(input_dev);
+		break;
 	}
 }
 
@@ -400,6 +478,25 @@ static void snd_usb_caiaq_tks4_dispatch(struct snd_usb_caiaqdev *dev,
 	input_sync(dev->input_dev);
 }
 
+#define MASCHINE_MSGBLOCK_SIZE 2
+
+static void snd_usb_caiaq_maschine_dispatch(struct snd_usb_caiaqdev *dev,
+					const unsigned char *buf,
+					unsigned int len)
+{
+	unsigned int i, pad_id;
+	uint16_t pressure;
+
+	for (i = 0; i < MASCHINE_PADS; i++) {
+		pressure = be16_to_cpu(buf[i * 2] << 8 | buf[(i * 2) + 1]);
+		pad_id = pressure >> 12;
+
+		input_report_abs(dev->input_dev, MASCHINE_PAD(pad_id), pressure & 0xfff);
+	}
+
+	input_sync(dev->input_dev);
+}
+
 static void snd_usb_caiaq_ep4_reply_dispatch(struct urb *urb)
 {
 	struct snd_usb_caiaqdev *dev = urb->context;
@@ -425,6 +522,13 @@ static void snd_usb_caiaq_ep4_reply_dispatch(struct urb *urb)
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLS4):
 		snd_usb_caiaq_tks4_dispatch(dev, buf, urb->actual_length);
 		break;
+
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
+		if (urb->actual_length < (MASCHINE_PADS * MASCHINE_MSGBLOCK_SIZE))
+			goto requeue;
+
+		snd_usb_caiaq_maschine_dispatch(dev, buf, urb->actual_length);
+		break;
 	}
 
 requeue:
@@ -444,6 +548,7 @@ static int snd_usb_caiaq_input_open(struct input_dev *idev)
 	switch (dev->chip.usb_id) {
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1):
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLS4):
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
 		if (usb_submit_urb(dev->ep4_in_urb, GFP_KERNEL) != 0)
 			return -EIO;
 		break;
@@ -462,6 +567,7 @@ static void snd_usb_caiaq_input_close(struct input_dev *idev)
 	switch (dev->chip.usb_id) {
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1):
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLS4):
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
 		usb_kill_urb(dev->ep4_in_urb);
 		break;
 	}
@@ -652,6 +758,50 @@ int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev)
 
 		break;
 
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_MASCHINECONTROLLER):
+		input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+		input->absbit[0] = BIT_MASK(ABS_HAT0X) | BIT_MASK(ABS_HAT0Y) |
+			BIT_MASK(ABS_HAT1X) | BIT_MASK(ABS_HAT1Y) |
+			BIT_MASK(ABS_HAT2X) | BIT_MASK(ABS_HAT2Y) |
+			BIT_MASK(ABS_HAT3X) | BIT_MASK(ABS_HAT3Y) |
+			BIT_MASK(ABS_RX) | BIT_MASK(ABS_RY) |
+			BIT_MASK(ABS_RZ);
+
+		BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_maschine));
+		memcpy(dev->keycode, keycode_maschine, sizeof(keycode_maschine));
+		input->keycodemax = ARRAY_SIZE(keycode_maschine);
+
+		for (i = 0; i < MASCHINE_PADS; i++) {
+			input->absbit[0] |= MASCHINE_PAD(i);
+			input_set_abs_params(input, MASCHINE_PAD(i), 0, 0xfff, 5, 10);
+		}
+
+		input_set_abs_params(input, ABS_HAT0X, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_HAT0Y, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_HAT1X, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_HAT1Y, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_HAT2X, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_HAT2Y, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_HAT3X, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_HAT3Y, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_RX, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_RY, 0, 999, 0, 10);
+		input_set_abs_params(input, ABS_RZ, 0, 999, 0, 10);
+
+		dev->ep4_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!dev->ep4_in_urb) {
+			ret = -ENOMEM;
+			goto exit_free_idev;
+		}
+
+		usb_fill_bulk_urb(dev->ep4_in_urb, usb_dev,
+				  usb_rcvbulkpipe(usb_dev, 0x4),
+				  dev->ep4_in_buf, EP4_BUFSIZE,
+				  snd_usb_caiaq_ep4_reply_dispatch, dev);
+
+		snd_usb_caiaq_set_auto_msg(dev, 1, 10, 5);
+		break;
+
 	default:
 		/* no input methods supported on this device */
 		goto exit_free_idev;
@@ -690,4 +840,3 @@ void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev)
 	input_unregister_device(dev->input_dev);
 	dev->input_dev = NULL;
 }
-