PCI: fix for quirk_e100_interrupt()

Check that the e100 is in the D0 power state. If it's not, it won't
respond to MMIO accesses and we end up with master-abort machine
checks on some platforms.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/pci/quirks.c

@@ -1415,9 +1415,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos);
 
 static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
 {
-	u16 command;
+	u16 command, pmcsr;
 	u8 __iomem *csr;
 	u8 cmd_hi;
+	int pm;
 
 	switch (dev->device) {
 	/* PCI IDs taken from drivers/net/e100.c */
@@ -1451,6 +1452,17 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
 	if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0))
 		return;
 
+	/*
+	 * Check that the device is in the D0 power state. If it's not,
+	 * there is no point to look any further.
+	 */
+	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+	if (pm) {
+		pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
+			return;
+	}
+
 	/* Convert from PCI bus to resource space.  */
 	csr = ioremap(pci_resource_start(dev, 0), 8);
 	if (!csr) {