[media] cx23885: add RC support for MyGica X8507

This series add remote control support for MyGica X8507.
I test for 2 month under OpenSuse(X64) 11.4 and 12.2 with
kernel 3.4, 3.5, 3.6 also 3.7-rc2 and rc3.

[mchehab@redhat.com: fixed whitespacing	- it seems that	Alfredo's emailer mangled
 it]

Signed-off-by: Alfredo J. Delaiti <alfredodelaiti@netscape.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/pci/cx23885/cx23885-cards.c

@@ -1408,6 +1408,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
 		break;
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_TEVII_S470:
+	case CX23885_BOARD_MYGICA_X8507:
 		if (!enable_885_ir)
 			break;
 		dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
@@ -1450,6 +1451,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_MYGICA_X8507:
 		cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
 		/* sd_ir is a duplicate pointer to the AV Core, just clear it */
 		dev->sd_ir = NULL;
@@ -1494,6 +1496,7 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_MYGICA_X8507:
 		if (dev->sd_ir)
 			cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
 		break;

drivers/media/pci/cx23885/cx23885-input.c

@@ -89,6 +89,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 	case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL:
 	case CX23885_BOARD_TEVII_S470:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_MYGICA_X8507:
 		/*
 		 * The only boards we handle right now.  However other boards
 		 * using the CX2388x integrated IR controller should be similar
@@ -140,6 +141,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
+	case CX23885_BOARD_MYGICA_X8507:
 		/*
 		 * The IR controller on this board only returns pulse widths.
 		 * Any other mode setting will fail to set up the device.
@@ -289,6 +291,13 @@ int cx23885_input_init(struct cx23885_dev *dev)
 		/* A guess at the remote */
 		rc_map = RC_MAP_TEVII_NEC;
 		break;
+	case CX23885_BOARD_MYGICA_X8507:
+		/* Integrated CX23885 IR controller */
+		driver_type = RC_DRIVER_IR_RAW;
+		allowed_protos = RC_BIT_ALL;
+		/* A guess at the remote */
+		rc_map = RC_MAP_TOTAL_MEDIA_IN_HAND_02;
+		break;
 	default:
 		return -ENODEV;
 	}