bnx2x: uses build_skb() in receive path

bnx2x uses following formula to compute its rx_buf_sz :

dev->mtu + 2*L1_CACHE_BYTES + 14 + 8 + 8 + 2

Then core network adds NET_SKB_PAD and SKB_DATA_ALIGN(sizeof(struct
skb_shared_info))

Final allocated size for skb head on x86_64 (L1_CACHE_BYTES = 64,
MTU=1500) : 2112 bytes : SLUB/SLAB round this to 4096 bytes.

Since skb truesize is then bigger than SK_MEM_QUANTUM, we have lot of
false sharing because of mem_reclaim in UDP stack.

One possible way to half truesize is to reduce the need by 64 bytes
(2112 -> 2048 bytes)

Instead of allocating a full cache line at the end of packet for
alignment, we can use the fact that skb_shared_info sits at the end of
skb->head, and we can use this room, if we convert bnx2x to new
build_skb() infrastructure.

skb_shared_info will be initialized after hardware finished its
transfert, so we can eventually overwrite the final padding.

Using build_skb() also reduces cache line misses in the driver, since we
use cache hot skb instead of cold ones. Number of in-flight sk_buff
structures is lower, they are recycled while still hot.

Performance results :

(820.000 pps on a rx UDP monothread benchmark, instead of 720.000 pps)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Eilon Greenstein <eilong@broadcom.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Tom Herbert <therbert@google.com>
CC: Jamal Hadi Salim <hadi@mojatatu.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Thomas Graf <tgraf@infradead.org>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -293,8 +293,13 @@ enum {
 #define FCOE_TXQ_IDX(bp)	(MAX_ETH_TXQ_IDX(bp))
 
 /* fast path */
+/*
+ * This driver uses new build_skb() API :
+ * RX ring buffer contains pointer to kmalloc() data only,
+ * skb are built only after Hardware filled the frame.
+ */
 struct sw_rx_bd {
-	struct sk_buff	*skb;
+	u8		*data;
 	DEFINE_DMA_UNMAP_ADDR(mapping);
 };
 
@@ -424,8 +429,8 @@ union host_hc_status_block {
 
 struct bnx2x_agg_info {
 	/*
-	 * First aggregation buffer is an skb, the following - are pages.
-	 * We will preallocate the skbs for each aggregation when
+	 * First aggregation buffer is a data buffer, the following - are pages.
+	 * We will preallocate the data buffer for each aggregation when
 	 * we open the interface and will replace the BD at the consumer
 	 * with this one when we receive the TPA_START CQE in order to
 	 * keep the Rx BD ring consistent.
@@ -439,6 +444,7 @@ struct bnx2x_agg_info {
 	u16			parsing_flags;
 	u16			vlan_tag;
 	u16			len_on_bd;
+	u32			rxhash;
 };
 
 #define Q_STATS_OFFSET32(stat_name) \
@@ -1187,10 +1193,20 @@ struct bnx2x {
 #define ETH_MAX_JUMBO_PACKET_SIZE	9600
 
 	/* Max supported alignment is 256 (8 shift) */
-#define BNX2X_RX_ALIGN_SHIFT		((L1_CACHE_SHIFT < 8) ? \
-					 L1_CACHE_SHIFT : 8)
-	/* FW use 2 Cache lines Alignment for start packet and size  */
-#define BNX2X_FW_RX_ALIGN		(2 << BNX2X_RX_ALIGN_SHIFT)
+#define BNX2X_RX_ALIGN_SHIFT		min(8, L1_CACHE_SHIFT)
+
+	/* FW uses 2 Cache lines Alignment for start packet and size
+	 *
+	 * We assume skb_build() uses sizeof(struct skb_shared_info) bytes
+	 * at the end of skb->data, to avoid wasting a full cache line.
+	 * This reduces memory use (skb->truesize).
+	 */
+#define BNX2X_FW_RX_ALIGN_START	(1UL << BNX2X_RX_ALIGN_SHIFT)
+
+#define BNX2X_FW_RX_ALIGN_END					\
+	max(1UL << BNX2X_RX_ALIGN_SHIFT, 			\
+	    SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
+
 #define BNX2X_PXP_DRAM_ALIGN		(BNX2X_RX_ALIGN_SHIFT - 5)
 
 	struct host_sp_status_block *def_status_blk;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -294,8 +294,21 @@ static void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp,
 	   fp->last_max_sge, fp->rx_sge_prod);
 }
 
+/* Set Toeplitz hash value in the skb using the value from the
+ * CQE (calculated by HW).
+ */
+static u32 bnx2x_get_rxhash(const struct bnx2x *bp,
+			    const struct eth_fast_path_rx_cqe *cqe)
+{
+	/* Set Toeplitz hash from CQE */
+	if ((bp->dev->features & NETIF_F_RXHASH) &&
+	    (cqe->status_flags & ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG))
+		return le32_to_cpu(cqe->rss_hash_result);
+	return 0;
+}
+
 static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
-			    struct sk_buff *skb, u16 cons, u16 prod,
+			    u16 cons, u16 prod,
 			    struct eth_fast_path_rx_cqe *cqe)
 {
 	struct bnx2x *bp = fp->bp;
@@ -310,9 +323,9 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 	if (tpa_info->tpa_state != BNX2X_TPA_STOP)
 		BNX2X_ERR("start of bin not in stop [%d]\n", queue);
 
-	/* Try to map an empty skb from the aggregation info  */
+	/* Try to map an empty data buffer from the aggregation info  */
 	mapping = dma_map_single(&bp->pdev->dev,
-				 first_buf->skb->data,
+				 first_buf->data + NET_SKB_PAD,
 				 fp->rx_buf_size, DMA_FROM_DEVICE);
 	/*
 	 *  ...if it fails - move the skb from the consumer to the producer
@@ -322,15 +335,15 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 
 	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 		/* Move the BD from the consumer to the producer */
-		bnx2x_reuse_rx_skb(fp, cons, prod);
+		bnx2x_reuse_rx_data(fp, cons, prod);
 		tpa_info->tpa_state = BNX2X_TPA_ERROR;
 		return;
 	}
 
-	/* move empty skb from pool to prod */
-	prod_rx_buf->skb = first_buf->skb;
+	/* move empty data from pool to prod */
+	prod_rx_buf->data = first_buf->data;
 	dma_unmap_addr_set(prod_rx_buf, mapping, mapping);
-	/* point prod_bd to new skb */
+	/* point prod_bd to new data */
 	prod_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
 	prod_bd->addr_lo = cpu_to_le32(U64_LO(mapping));
 
@@ -344,6 +357,7 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 	tpa_info->tpa_state = BNX2X_TPA_START;
 	tpa_info->len_on_bd = le16_to_cpu(cqe->len_on_bd);
 	tpa_info->placement_offset = cqe->placement_offset;
+	tpa_info->rxhash = bnx2x_get_rxhash(bp, cqe);
 
 #ifdef BNX2X_STOP_ON_ERROR
 	fp->tpa_queue_used |= (1 << queue);
@@ -471,11 +485,12 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 {
 	struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue];
 	struct sw_rx_bd *rx_buf = &tpa_info->first_buf;
-	u8 pad = tpa_info->placement_offset;
+	u32 pad = tpa_info->placement_offset;
 	u16 len = tpa_info->len_on_bd;
-	struct sk_buff *skb = rx_buf->skb;
+	struct sk_buff *skb = NULL;
+	u8 *data = rx_buf->data;
 	/* alloc new skb */
-	struct sk_buff *new_skb;
+	u8 *new_data;
 	u8 old_tpa_state = tpa_info->tpa_state;
 
 	tpa_info->tpa_state = BNX2X_TPA_STOP;
@@ -486,18 +501,18 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	if (old_tpa_state == BNX2X_TPA_ERROR)
 		goto drop;
 
-	/* Try to allocate the new skb */
-	new_skb = netdev_alloc_skb(bp->dev, fp->rx_buf_size);
+	/* Try to allocate the new data */
+	new_data = kmalloc(fp->rx_buf_size + NET_SKB_PAD, GFP_ATOMIC);
 
 	/* Unmap skb in the pool anyway, as we are going to change
 	   pool entry status to BNX2X_TPA_STOP even if new skb allocation
 	   fails. */
 	dma_unmap_single(&bp->pdev->dev, dma_unmap_addr(rx_buf, mapping),
 			 fp->rx_buf_size, DMA_FROM_DEVICE);
+	if (likely(new_data))
+		skb = build_skb(data);
 
-	if (likely(new_skb)) {
-		prefetch(skb);
-		prefetch(((char *)(skb)) + L1_CACHE_BYTES);
+	if (likely(skb)) {
 
 #ifdef BNX2X_STOP_ON_ERROR
 		if (pad + len > fp->rx_buf_size) {
@@ -509,8 +524,9 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		}
 #endif
 
-		skb_reserve(skb, pad);
+		skb_reserve(skb, pad + NET_SKB_PAD);
 		skb_put(skb, len);
+		skb->rxhash = tpa_info->rxhash;
 
 		skb->protocol = eth_type_trans(skb, bp->dev);
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -526,8 +542,8 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		}
 
 
-		/* put new skb in bin */
-		rx_buf->skb = new_skb;
+		/* put new data in bin */
+		rx_buf->data = new_data;
 
 		return;
 	}
@@ -539,19 +555,6 @@ drop:
 	fp->eth_q_stats.rx_skb_alloc_failed++;
 }
 
-/* Set Toeplitz hash value in the skb using the value from the
- * CQE (calculated by HW).
- */
-static inline void bnx2x_set_skb_rxhash(struct bnx2x *bp, union eth_rx_cqe *cqe,
-					struct sk_buff *skb)
-{
-	/* Set Toeplitz hash from CQE */
-	if ((bp->dev->features & NETIF_F_RXHASH) &&
-	    (cqe->fast_path_cqe.status_flags &
-	     ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG))
-		skb->rxhash =
-		le32_to_cpu(cqe->fast_path_cqe.rss_hash_result);
-}
 
 int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 {
@@ -594,6 +597,7 @@ int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 		u8 cqe_fp_flags;
 		enum eth_rx_cqe_type cqe_fp_type;
 		u16 len, pad;
+		u8 *data;
 
 #ifdef BNX2X_STOP_ON_ERROR
 		if (unlikely(bp->panic))
@@ -604,13 +608,6 @@ int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 		bd_prod = RX_BD(bd_prod);
 		bd_cons = RX_BD(bd_cons);
 
-		/* Prefetch the page containing the BD descriptor
-		   at producer's index. It will be needed when new skb is
-		   allocated */
-		prefetch((void *)(PAGE_ALIGN((unsigned long)
-					     (&fp->rx_desc_ring[bd_prod])) -
-				  PAGE_SIZE + 1));
-
 		cqe = &fp->rx_comp_ring[comp_ring_cons];
 		cqe_fp = &cqe->fast_path_cqe;
 		cqe_fp_flags = cqe_fp->type_error_flags;
@@ -626,125 +623,110 @@ int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 		if (unlikely(CQE_TYPE_SLOW(cqe_fp_type))) {
 			bnx2x_sp_event(fp, cqe);
 			goto next_cqe;
+		}
+		rx_buf = &fp->rx_buf_ring[bd_cons];
+		data = rx_buf->data;
 
-		/* this is an rx packet */
-		} else {
-			rx_buf = &fp->rx_buf_ring[bd_cons];
-			skb = rx_buf->skb;
-			prefetch(skb);
-
-			if (!CQE_TYPE_FAST(cqe_fp_type)) {
+		if (!CQE_TYPE_FAST(cqe_fp_type)) {
 #ifdef BNX2X_STOP_ON_ERROR
-				/* sanity check */
-				if (fp->disable_tpa &&
-				    (CQE_TYPE_START(cqe_fp_type) ||
-				     CQE_TYPE_STOP(cqe_fp_type)))
-					BNX2X_ERR("START/STOP packet while "
-						  "disable_tpa type %x\n",
-						  CQE_TYPE(cqe_fp_type));
+			/* sanity check */
+			if (fp->disable_tpa &&
+			    (CQE_TYPE_START(cqe_fp_type) ||
+			     CQE_TYPE_STOP(cqe_fp_type)))
+				BNX2X_ERR("START/STOP packet while "
+					  "disable_tpa type %x\n",
+					  CQE_TYPE(cqe_fp_type));
 #endif
 
-				if (CQE_TYPE_START(cqe_fp_type)) {
-					u16 queue = cqe_fp->queue_index;
-					DP(NETIF_MSG_RX_STATUS,
-					   "calling tpa_start on queue %d\n",
-					   queue);
-
-					bnx2x_tpa_start(fp, queue, skb,
-							bd_cons, bd_prod,
-							cqe_fp);
-
-					/* Set Toeplitz hash for LRO skb */
-					bnx2x_set_skb_rxhash(bp, cqe, skb);
-
-					goto next_rx;
-
-				} else {
-					u16 queue =
-						cqe->end_agg_cqe.queue_index;
-					DP(NETIF_MSG_RX_STATUS,
-					   "calling tpa_stop on queue %d\n",
-					   queue);
+			if (CQE_TYPE_START(cqe_fp_type)) {
+				u16 queue = cqe_fp->queue_index;
+				DP(NETIF_MSG_RX_STATUS,
+				   "calling tpa_start on queue %d\n",
+				   queue);
 
-					bnx2x_tpa_stop(bp, fp, queue,
-						       &cqe->end_agg_cqe,
-						       comp_ring_cons);
+				bnx2x_tpa_start(fp, queue,
+						bd_cons, bd_prod,
+						cqe_fp);
+				goto next_rx;
+			} else {
+				u16 queue =
+					cqe->end_agg_cqe.queue_index;
+				DP(NETIF_MSG_RX_STATUS,
+				   "calling tpa_stop on queue %d\n",
+				   queue);
+
+				bnx2x_tpa_stop(bp, fp, queue,
+					       &cqe->end_agg_cqe,
+					       comp_ring_cons);
 #ifdef BNX2X_STOP_ON_ERROR
-					if (bp->panic)
-						return 0;
+				if (bp->panic)
+					return 0;
 #endif
 
-					bnx2x_update_sge_prod(fp, cqe_fp);
-					goto next_cqe;
-				}
+				bnx2x_update_sge_prod(fp, cqe_fp);
+				goto next_cqe;
 			}
-			/* non TPA */
-			len = le16_to_cpu(cqe_fp->pkt_len);
-			pad = cqe_fp->placement_offset;
-			dma_sync_single_for_cpu(&bp->pdev->dev,
+		}
+		/* non TPA */
+		len = le16_to_cpu(cqe_fp->pkt_len);
+		pad = cqe_fp->placement_offset;
+		dma_sync_single_for_cpu(&bp->pdev->dev,
 					dma_unmap_addr(rx_buf, mapping),
-						       pad + RX_COPY_THRESH,
-						       DMA_FROM_DEVICE);
-			prefetch(((char *)(skb)) + L1_CACHE_BYTES);
+					pad + RX_COPY_THRESH,
+					DMA_FROM_DEVICE);
+		pad += NET_SKB_PAD;
+		prefetch(data + pad); /* speedup eth_type_trans() */
+		/* is this an error packet? */
+		if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
+			DP(NETIF_MSG_RX_ERR,
+			   "ERROR  flags %x  rx packet %u\n",
+			   cqe_fp_flags, sw_comp_cons);
+			fp->eth_q_stats.rx_err_discard_pkt++;
+			goto reuse_rx;
+		}
 
-			/* is this an error packet? */
-			if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) {
+		/* Since we don't have a jumbo ring
+		 * copy small packets if mtu > 1500
+		 */
+		if ((bp->dev->mtu > ETH_MAX_PACKET_SIZE) &&
+		    (len <= RX_COPY_THRESH)) {
+			skb = netdev_alloc_skb_ip_align(bp->dev, len);
+			if (skb == NULL) {
 				DP(NETIF_MSG_RX_ERR,
-				   "ERROR  flags %x  rx packet %u\n",
-				   cqe_fp_flags, sw_comp_cons);
-				fp->eth_q_stats.rx_err_discard_pkt++;
+				   "ERROR  packet dropped because of alloc failure\n");
+				fp->eth_q_stats.rx_skb_alloc_failed++;
 				goto reuse_rx;
 			}
-
-			/* Since we don't have a jumbo ring
-			 * copy small packets if mtu > 1500
-			 */
-			if ((bp->dev->mtu > ETH_MAX_PACKET_SIZE) &&
-			    (len <= RX_COPY_THRESH)) {
-				struct sk_buff *new_skb;
-
-				new_skb = netdev_alloc_skb(bp->dev, len + pad);
-				if (new_skb == NULL) {
-					DP(NETIF_MSG_RX_ERR,
-					   "ERROR  packet dropped "
-					   "because of alloc failure\n");
-					fp->eth_q_stats.rx_skb_alloc_failed++;
-					goto reuse_rx;
-				}
-
-				/* aligned copy */
-				skb_copy_from_linear_data_offset(skb, pad,
-						    new_skb->data + pad, len);
-				skb_reserve(new_skb, pad);
-				skb_put(new_skb, len);
-
-				bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod);
-
-				skb = new_skb;
-
-			} else
-			if (likely(bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0)) {
+			memcpy(skb->data, data + pad, len);
+			bnx2x_reuse_rx_data(fp, bd_cons, bd_prod);
+		} else {
+			if (likely(bnx2x_alloc_rx_data(bp, fp, bd_prod) == 0)) {
 				dma_unmap_single(&bp->pdev->dev,
-					dma_unmap_addr(rx_buf, mapping),
+						 dma_unmap_addr(rx_buf, mapping),
 						 fp->rx_buf_size,
 						 DMA_FROM_DEVICE);
+				skb = build_skb(data);
+				if (unlikely(!skb)) {
+					kfree(data);
+					fp->eth_q_stats.rx_skb_alloc_failed++;
+					goto next_rx;
+				}
 				skb_reserve(skb, pad);
-				skb_put(skb, len);
-
 			} else {
 				DP(NETIF_MSG_RX_ERR,
 				   "ERROR  packet dropped because "
 				   "of alloc failure\n");
 				fp->eth_q_stats.rx_skb_alloc_failed++;
 reuse_rx:
-				bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod);
+				bnx2x_reuse_rx_data(fp, bd_cons, bd_prod);
 				goto next_rx;
 			}
 
+			skb_put(skb, len);
 			skb->protocol = eth_type_trans(skb, bp->dev);
 
 			/* Set Toeplitz hash for a none-LRO skb */
-			bnx2x_set_skb_rxhash(bp, cqe, skb);
+			skb->rxhash = bnx2x_get_rxhash(bp, cqe_fp);
 
 			skb_checksum_none_assert(skb);
 
@@ -767,7 +749,7 @@ reuse_rx:
 
 
 next_rx:
-		rx_buf->skb = NULL;
+		rx_buf->data = NULL;
 
 		bd_cons = NEXT_RX_IDX(bd_cons);
 		bd_prod = NEXT_RX_IDX(bd_prod);
@@ -1013,9 +995,9 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
 				struct sw_rx_bd *first_buf =
 					&tpa_info->first_buf;
 
-				first_buf->skb = netdev_alloc_skb(bp->dev,
-						       fp->rx_buf_size);
-				if (!first_buf->skb) {
+				first_buf->data = kmalloc(fp->rx_buf_size + NET_SKB_PAD,
+							  GFP_ATOMIC);
+				if (!first_buf->data) {
 					BNX2X_ERR("Failed to allocate TPA "
 						  "skb pool for queue[%d] - "
 						  "disabling TPA on this "
@@ -1118,16 +1100,16 @@ static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp)
 
 	for (i = 0; i < NUM_RX_BD; i++) {
 		struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i];
-		struct sk_buff *skb = rx_buf->skb;
+		u8 *data = rx_buf->data;
 
-		if (skb == NULL)
+		if (data == NULL)
 			continue;
 		dma_unmap_single(&bp->pdev->dev,
 				 dma_unmap_addr(rx_buf, mapping),
 				 fp->rx_buf_size, DMA_FROM_DEVICE);
 
-		rx_buf->skb = NULL;
-		dev_kfree_skb(skb);
+		rx_buf->data = NULL;
+		kfree(data);
 	}
 }
 
@@ -1509,6 +1491,7 @@ static inline void bnx2x_set_rx_buf_size(struct bnx2x *bp)
 
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
+		u32 mtu;
 
 		/* Always use a mini-jumbo MTU for the FCoE L2 ring */
 		if (IS_FCOE_IDX(i))
@@ -1518,13 +1501,15 @@ static inline void bnx2x_set_rx_buf_size(struct bnx2x *bp)
 			 * IP_HEADER_ALIGNMENT_PADDING to prevent a buffer
 			 * overrun attack.
 			 */
-			fp->rx_buf_size =
-				BNX2X_FCOE_MINI_JUMBO_MTU + ETH_OVREHEAD +
-				BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING;
+			mtu = BNX2X_FCOE_MINI_JUMBO_MTU;
 		else
-			fp->rx_buf_size =
-				bp->dev->mtu + ETH_OVREHEAD +
-				BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING;
+			mtu = bp->dev->mtu;
+		fp->rx_buf_size = BNX2X_FW_RX_ALIGN_START +
+				  IP_HEADER_ALIGNMENT_PADDING +
+				  ETH_OVREHEAD +
+				  mtu +
+				  BNX2X_FW_RX_ALIGN_END;
+		/* Note : rx_buf_size doesnt take into account NET_SKB_PAD */
 	}
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h

@@ -910,26 +910,27 @@ static inline int bnx2x_alloc_rx_sge(struct bnx2x *bp,
 	return 0;
 }
 
-static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp,
-				     struct bnx2x_fastpath *fp, u16 index)
+static inline int bnx2x_alloc_rx_data(struct bnx2x *bp,
+				      struct bnx2x_fastpath *fp, u16 index)
 {
-	struct sk_buff *skb;
+	u8 *data;
 	struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[index];
 	struct eth_rx_bd *rx_bd = &fp->rx_desc_ring[index];
 	dma_addr_t mapping;
 
-	skb = netdev_alloc_skb(bp->dev, fp->rx_buf_size);
-	if (unlikely(skb == NULL))
+	data = kmalloc(fp->rx_buf_size + NET_SKB_PAD, GFP_ATOMIC);
+	if (unlikely(data == NULL))
 		return -ENOMEM;
 
-	mapping = dma_map_single(&bp->pdev->dev, skb->data, fp->rx_buf_size,
+	mapping = dma_map_single(&bp->pdev->dev, data + NET_SKB_PAD,
+				 fp->rx_buf_size,
 				 DMA_FROM_DEVICE);
 	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
-		dev_kfree_skb_any(skb);
+		kfree(data);
 		return -ENOMEM;
 	}
 
-	rx_buf->skb = skb;
+	rx_buf->data = data;
 	dma_unmap_addr_set(rx_buf, mapping, mapping);
 
 	rx_bd->addr_hi = cpu_to_le32(U64_HI(mapping));
@@ -938,12 +939,12 @@ static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp,
 	return 0;
 }
 
-/* note that we are not allocating a new skb,
+/* note that we are not allocating a new buffer,
  * we are just moving one from cons to prod
  * we are not creating a new mapping,
  * so there is no need to check for dma_mapping_error().
  */
-static inline void bnx2x_reuse_rx_skb(struct bnx2x_fastpath *fp,
+static inline void bnx2x_reuse_rx_data(struct bnx2x_fastpath *fp,
 				      u16 cons, u16 prod)
 {
 	struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons];
@@ -953,7 +954,7 @@ static inline void bnx2x_reuse_rx_skb(struct bnx2x_fastpath *fp,
 
 	dma_unmap_addr_set(prod_rx_buf, mapping,
 			   dma_unmap_addr(cons_rx_buf, mapping));
-	prod_rx_buf->skb = cons_rx_buf->skb;
+	prod_rx_buf->data = cons_rx_buf->data;
 	*prod_bd = *cons_bd;
 }
 
@@ -1029,9 +1030,9 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 	for (i = 0; i < last; i++) {
 		struct bnx2x_agg_info *tpa_info = &fp->tpa_info[i];
 		struct sw_rx_bd *first_buf = &tpa_info->first_buf;
-		struct sk_buff *skb = first_buf->skb;
+		u8 *data = first_buf->data;
 
-		if (skb == NULL) {
+		if (data == NULL) {
 			DP(NETIF_MSG_IFDOWN, "tpa bin %d empty on free\n", i);
 			continue;
 		}
@@ -1039,8 +1040,8 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 			dma_unmap_single(&bp->pdev->dev,
 					 dma_unmap_addr(first_buf, mapping),
 					 fp->rx_buf_size, DMA_FROM_DEVICE);
-		dev_kfree_skb(skb);
-		first_buf->skb = NULL;
+		kfree(data);
+		first_buf->data = NULL;
 	}
 }
 
@@ -1148,7 +1149,7 @@ static inline int bnx2x_alloc_rx_bds(struct bnx2x_fastpath *fp,
 	 * fp->eth_q_stats.rx_skb_alloc_failed = 0
 	 */
 	for (i = 0; i < rx_ring_size; i++) {
-		if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) {
+		if (bnx2x_alloc_rx_data(bp, fp, ring_prod) < 0) {
 			fp->eth_q_stats.rx_skb_alloc_failed++;
 			continue;
 		}

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

@@ -1740,6 +1740,7 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode)
 	struct sw_rx_bd *rx_buf;
 	u16 len;
 	int rc = -ENODEV;
+	u8 *data;
 
 	/* check the loopback mode */
 	switch (loopback_mode) {
@@ -1865,10 +1866,9 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode)
 	dma_sync_single_for_cpu(&bp->pdev->dev,
 				   dma_unmap_addr(rx_buf, mapping),
 				   fp_rx->rx_buf_size, DMA_FROM_DEVICE);
-	skb = rx_buf->skb;
-	skb_reserve(skb, cqe->fast_path_cqe.placement_offset);
+	data = rx_buf->data + NET_SKB_PAD + cqe->fast_path_cqe.placement_offset;
 	for (i = ETH_HLEN; i < pkt_size; i++)
-		if (*(skb->data + i) != (unsigned char) (i & 0xff))
+		if (*(data + i) != (unsigned char) (i & 0xff))
 			goto test_loopback_rx_exit;
 
 	rc = 0;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -2789,8 +2789,8 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp,
 	/* This should be a maximum number of data bytes that may be
 	 * placed on the BD (not including paddings).
 	 */
-	rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN -
-		IP_HEADER_ALIGNMENT_PADDING;
+	rxq_init->buf_sz = fp->rx_buf_size - BNX2X_FW_RX_ALIGN_START -
+		BNX2X_FW_RX_ALIGN_END -	IP_HEADER_ALIGNMENT_PADDING;
 
 	rxq_init->cl_qzone_id = fp->cl_qzone_id;
 	rxq_init->tpa_agg_sz = tpa_agg_size;