mach-ux500: move keymaps to new file

Move keylayouts to a dedicated file and plug these keylayouts
for input platform data. This will make addition of new and custom
keylayouts localized.

Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>

arch/arm/mach-ux500/Makefile

@@ -5,7 +5,8 @@
 obj-y				:= clock.o cpu.o devices.o devices-common.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
-obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o
+obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o \
+				board-mop500-keypads.o
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o

arch/arm/mach-ux500/board-mop500-keypads.c

@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Keypad layouts for various boards
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <plat/pincfg.h>
+#include <plat/ske.h>
+
+#include <mach/devices.h>
+#include <mach/hardware.h>
+
+#include "devices-db8500.h"
+#include "board-mop500.h"
+
+/* STMPE/SKE keypad use this key layout */
+static const unsigned int mop500_keymap[] = {
+	KEY(2, 5, KEY_END),
+	KEY(4, 1, KEY_POWER),
+	KEY(3, 5, KEY_VOLUMEDOWN),
+	KEY(1, 3, KEY_3),
+	KEY(5, 2, KEY_RIGHT),
+	KEY(5, 0, KEY_9),
+
+	KEY(0, 5, KEY_MENU),
+	KEY(7, 6, KEY_ENTER),
+	KEY(4, 5, KEY_0),
+	KEY(6, 7, KEY_2),
+	KEY(3, 4, KEY_UP),
+	KEY(3, 3, KEY_DOWN),
+
+	KEY(6, 4, KEY_SEND),
+	KEY(6, 2, KEY_BACK),
+	KEY(4, 2, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_1),
+	KEY(4, 3, KEY_LEFT),
+	KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data mop500_keymap_data = {
+	.keymap		= mop500_keymap,
+	.keymap_size    = ARRAY_SIZE(mop500_keymap),
+};
+
+/*
+ * Nomadik SKE keypad
+ */
+#define ROW_PIN_I0      164
+#define ROW_PIN_I1      163
+#define ROW_PIN_I2      162
+#define ROW_PIN_I3      161
+#define ROW_PIN_I4      156
+#define ROW_PIN_I5      155
+#define ROW_PIN_I6      154
+#define ROW_PIN_I7      153
+#define COL_PIN_O0      168
+#define COL_PIN_O1      167
+#define COL_PIN_O2      166
+#define COL_PIN_O3      165
+#define COL_PIN_O4      160
+#define COL_PIN_O5      159
+#define COL_PIN_O6      158
+#define COL_PIN_O7      157
+
+#define SKE_KPD_MAX_ROWS	8
+#define SKE_KPD_MAX_COLS	8
+
+static int ske_kp_rows[] = {
+	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
+	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
+};
+
+/*
+ * ske_set_gpio_row: request and set gpio rows
+ */
+static int ske_set_gpio_row(int gpio)
+{
+	int ret;
+
+	ret = gpio_request(gpio, "ske-kp");
+	if (ret < 0) {
+		pr_err("ske_set_gpio_row: gpio request failed\n");
+		return ret;
+	}
+
+	ret = gpio_direction_output(gpio, 1);
+	if (ret < 0) {
+		pr_err("ske_set_gpio_row: gpio direction failed\n");
+		gpio_free(gpio);
+	}
+
+	return ret;
+}
+
+/*
+ * ske_kp_init - enable the gpio configuration
+ */
+static int ske_kp_init(void)
+{
+	int ret, i;
+
+	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
+		ret = ske_set_gpio_row(ske_kp_rows[i]);
+		if (ret < 0) {
+			pr_err("ske_kp_init: failed init\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct ske_keypad_platform_data ske_keypad_board = {
+	.init		= ske_kp_init,
+	.keymap_data    = &mop500_keymap_data,
+	.no_autorepeat  = true,
+	.krow		= SKE_KPD_MAX_ROWS,     /* 8x8 matrix */
+	.kcol		= SKE_KPD_MAX_COLS,
+	.debounce_ms    = 40,			/* in millisecs */
+};
+
+void mop500_keypad_init(void)
+{
+	db8500_add_ske_keypad(&ske_keypad_board);
+}

arch/arm/mach-ux500/board-mop500.c

@@ -26,7 +26,6 @@
 
 #include <plat/pincfg.h>
 #include <plat/i2c.h>
-#include <plat/ske.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -172,116 +171,8 @@ static void __init mop500_i2c_init(void)
 	db8500_add_i2c3(&u8500_i2c3_data);
 }
 
-static const unsigned int ux500_keymap[] = {
-	KEY(2, 5, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(3, 5, KEY_VOLUMEDOWN),
-	KEY(1, 3, KEY_3),
-	KEY(5, 2, KEY_RIGHT),
-	KEY(5, 0, KEY_9),
-
-	KEY(0, 5, KEY_MENU),
-	KEY(7, 6, KEY_ENTER),
-	KEY(4, 5, KEY_0),
-	KEY(6, 7, KEY_2),
-	KEY(3, 4, KEY_UP),
-	KEY(3, 3, KEY_DOWN),
-
-	KEY(6, 4, KEY_SEND),
-	KEY(6, 2, KEY_BACK),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_1),
-	KEY(4, 3, KEY_LEFT),
-	KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data ux500_keymap_data = {
-	.keymap         = ux500_keymap,
-	.keymap_size    = ARRAY_SIZE(ux500_keymap),
-};
-
-/*
- * Nomadik SKE keypad
- */
-#define ROW_PIN_I0      164
-#define ROW_PIN_I1      163
-#define ROW_PIN_I2      162
-#define ROW_PIN_I3      161
-#define ROW_PIN_I4      156
-#define ROW_PIN_I5      155
-#define ROW_PIN_I6      154
-#define ROW_PIN_I7      153
-#define COL_PIN_O0      168
-#define COL_PIN_O1      167
-#define COL_PIN_O2      166
-#define COL_PIN_O3      165
-#define COL_PIN_O4      160
-#define COL_PIN_O5      159
-#define COL_PIN_O6      158
-#define COL_PIN_O7      157
-
-#define SKE_KPD_MAX_ROWS        8
-#define SKE_KPD_MAX_COLS        8
-
-static int ske_kp_rows[] = {
-	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
-	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
-};
-
-/*
- * ske_set_gpio_row: request and set gpio rows
- */
-static int ske_set_gpio_row(int gpio)
-{
-	int ret;
-
-	ret = gpio_request(gpio, "ske-kp");
-	if (ret < 0) {
-		pr_err("ske_set_gpio_row: gpio request failed\n");
-		return ret;
-	}
-
-	ret = gpio_direction_output(gpio, 1);
-	if (ret < 0) {
-		pr_err("ske_set_gpio_row: gpio direction failed\n");
-		gpio_free(gpio);
-	}
-
-	return ret;
-}
-
-/*
- * ske_kp_init - enable the gpio configuration
- */
-static int ske_kp_init(void)
-{
-	int ret, i;
-
-	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
-		ret = ske_set_gpio_row(ske_kp_rows[i]);
-		if (ret < 0) {
-			pr_err("ske_kp_init: failed init\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static struct ske_keypad_platform_data ske_keypad_board = {
-	.init           = ske_kp_init,
-	.keymap_data    = &ux500_keymap_data,
-	.no_autorepeat  = true,
-	.krow           = SKE_KPD_MAX_ROWS,     /* 8x8 matrix */
-	.kcol           = SKE_KPD_MAX_COLS,
-	.debounce_ms    = 40,                   /* in millsecs */
-};
-
-
-
 /* add any platform devices here - TODO */
 static struct platform_device *platform_devs[] __initdata = {
-	&ux500_ske_keypad_device,
 };
 
 static void __init mop500_spi_init(void)
@@ -309,6 +200,8 @@ static void __init u8500_init_machine(void)
 	mop500_spi_init();
 	mop500_uart_init();
 
+	mop500_keypad_init();
+
 	platform_device_register(&ab8500_device);
 
 	i2c_register_board_info(0, mop500_i2c0_devices,

arch/arm/mach-ux500/board-mop500.h

@@ -16,5 +16,6 @@
 
 extern void mop500_sdi_init(void);
 extern void mop500_sdi_tc35892_init(void);
+extern void mop500_keypad_init(void);
 
 #endif

arch/arm/mach-ux500/devices-db8500.c

@@ -128,7 +128,7 @@ struct resource keypad_resources[] = {
 	},
 };
 
-struct platform_device ux500_ske_keypad_device = {
+struct platform_device u8500_ske_keypad_device = {
 	.name = "nmk-ske-keypad",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(keypad_resources),