ide-scsi: do non-atomic pc->flags testing

...also, convert ide-scsi to using the generic pc->flags defines.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/scsi/ide-scsi.c

@@ -60,14 +60,6 @@
 
 #define IDESCSI_DEBUG_LOG		0
 
-/*
- *	Packet command status bits.
- */
-#define PC_DMA_IN_PROGRESS		0	/* 1 while DMA in progress */
-#define PC_WRITING			1	/* Data direction */
-#define PC_TIMEDOUT			3	/* command timed out */
-#define PC_DMA_OK			4	/* Use DMA */
-
 /*
  *	SCSI command transformation layer
  */
@@ -319,8 +311,10 @@ static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
 		pc = opc;
 		rq = pc->rq;
 		pc->scsi_cmd->result = (CHECK_CONDITION << 1) |
-					((test_bit(PC_TIMEDOUT, &pc->flags)?DID_TIME_OUT:DID_OK) << 16);
-	} else if (test_bit(PC_TIMEDOUT, &pc->flags)) {
+				(((pc->flags & PC_FLAG_TIMEDOUT) ?
+				  DID_TIME_OUT :
+				  DID_OK) << 16);
+	} else if (pc->flags & PC_FLAG_TIMEDOUT) {
 		if (log)
 			printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n",
 					drive->name, pc->scsi_cmd->serial_number);
@@ -362,7 +356,7 @@ static int idescsi_expiry(ide_drive_t *drive)
 #if IDESCSI_DEBUG_LOG
 	printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies);
 #endif
-	set_bit(PC_TIMEDOUT, &pc->flags);
+	pc->flags |= PC_FLAG_TIMEDOUT;
 
 	return 0;					/* we do not want the ide subsystem to retry */
 }
@@ -384,7 +378,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
 	printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
 #endif /* IDESCSI_DEBUG_LOG */
 
-	if (test_bit(PC_TIMEDOUT, &pc->flags)){
+	if (pc->flags & PC_FLAG_TIMEDOUT) {
 #if IDESCSI_DEBUG_LOG
 		printk(KERN_WARNING "idescsi_pc_intr: got timed out packet  %lu at %lu\n",
 				pc->scsi_cmd->serial_number, jiffies);
@@ -393,7 +387,8 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
 		idescsi_end_request (drive, 1, 0);
 		return ide_stopped;
 	}
-	if (test_and_clear_bit (PC_DMA_IN_PROGRESS, &pc->flags)) {
+	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+		pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
 #if IDESCSI_DEBUG_LOG
 		printk ("ide-scsi: %s: DMA complete\n", drive->name);
 #endif /* IDESCSI_DEBUG_LOG */
@@ -432,7 +427,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
 					"- discarding data\n");
 				temp = pc->buf_size - pc->xferred;
 				if (temp) {
-					clear_bit(PC_WRITING, &pc->flags);
+					pc->flags &= ~PC_FLAG_WRITING;
 					if (pc->sg)
 						idescsi_input_buffers(drive, pc,
 									temp);
@@ -454,14 +449,14 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
 		}
 	}
 	if (ireason & IO) {
-		clear_bit(PC_WRITING, &pc->flags);
+		pc->flags &= ~PC_FLAG_WRITING;
 		if (pc->sg)
 			idescsi_input_buffers(drive, pc, bcount);
 		else
 			hwif->atapi_input_bytes(drive, pc->cur_pos,
 						bcount);
 	} else {
-		set_bit(PC_WRITING, &pc->flags);
+		pc->flags |= PC_FLAG_WRITING;
 		if (pc->sg)
 			idescsi_output_buffers(drive, pc, bcount);
 		else
@@ -501,8 +496,8 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
 	ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
 	/* Send the actual packet */
 	drive->hwif->atapi_output_bytes(drive, scsi->pc->c, 12);
-	if (test_bit (PC_DMA_OK, &pc->flags)) {
-		set_bit (PC_DMA_IN_PROGRESS, &pc->flags);
+	if (pc->flags & PC_FLAG_DMA_OK) {
+		pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
 		hwif->dma_start(drive);
 	}
 	return ide_started;
@@ -512,10 +507,10 @@ static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
 {
 	switch (pc->c[0]) {
 		case READ_6: case READ_10: case READ_12:
-			clear_bit(PC_WRITING, &pc->flags);
+			pc->flags &= ~PC_FLAG_WRITING;
 			return 0;
 		case WRITE_6: case WRITE_10: case WRITE_12:
-			set_bit(PC_WRITING, &pc->flags);
+			pc->flags |= PC_FLAG_WRITING;
 			return 0;
 		default:
 			return 1;
@@ -572,7 +567,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
 	ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma);
 
 	if (dma)
-		set_bit(PC_DMA_OK, &pc->flags);
+		pc->flags |= PC_FLAG_DMA_OK;
 
 	if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) {
 		ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc,