Bladeren bron

ixgbe: add support for get_ts_info

This patch adds support for the ethtool get_ts_info operation, which enables
access of available timestamp/timesync support for that device. It can query
which ptp clock device is associated with the particular port.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller 13 jaren geleden
bovenliggende
commit
e3aac889c7
1 gewijzigde bestanden met toevoegingen van 41 en 0 verwijderingen
  1. 41 0
      drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

+ 41 - 0
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

@@ -2696,6 +2696,46 @@ static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 	return ret;
 }
 
+static int ixgbe_get_ts_info(struct net_device *dev,
+			     struct ethtool_ts_info *info)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+
+	switch (adapter->hw.mac.type) {
+#ifdef CONFIG_IXGBE_PTP
+	case ixgbe_mac_X540:
+	case ixgbe_mac_82599EB:
+		info->so_timestamping =
+			SOF_TIMESTAMPING_TX_HARDWARE |
+			SOF_TIMESTAMPING_RX_HARDWARE |
+			SOF_TIMESTAMPING_RAW_HARDWARE;
+
+		if (adapter->ptp_clock)
+			info->phc_index = ptp_clock_index(adapter->ptp_clock);
+		else
+			info->phc_index = -1;
+
+		info->tx_types =
+			(1 << HWTSTAMP_TX_OFF) |
+			(1 << HWTSTAMP_TX_ON);
+
+		info->rx_filters =
+			(1 << HWTSTAMP_FILTER_NONE) |
+			(1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
+			(1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ) |
+			(1 << HWTSTAMP_FILTER_PTP_V2_EVENT) |
+			(1 << HWTSTAMP_FILTER_SOME);
+		break;
+#endif /* CONFIG_IXGBE_PTP */
+	default:
+		return ethtool_op_get_ts_info(dev, info);
+		break;
+	}
+	return 0;
+}
+
 static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.get_settings           = ixgbe_get_settings,
 	.set_settings           = ixgbe_set_settings,
@@ -2724,6 +2764,7 @@ static const struct ethtool_ops ixgbe_ethtool_ops = {
 	.set_coalesce           = ixgbe_set_coalesce,
 	.get_rxnfc		= ixgbe_get_rxnfc,
 	.set_rxnfc		= ixgbe_set_rxnfc,
+	.get_ts_info		= ixgbe_get_ts_info,
 };
 
 void ixgbe_set_ethtool_ops(struct net_device *netdev)