Staging: mimio: remove the mimio driver

It turns out that Mimio has a userspace solution for this product using
libusb, and the in-kernel driver is just getting in the way now and
causing problems.  So they have asked that the in-kernel driver be
removed.  As the staging driver wasn't quite working anyway, and Mimio
supports their libusb solution for all distros, I am removing the
in-kernel driver.

The libusb solution can be downloaded from:
	http://www.mimio.com/downloads/mimio_studio_software/linux.asp

Cc: <mwilder@cs.nmsu.edu>
Cc: Phil Hannent <phil@hannent.co.uk>
Cc: Marc Rousseau <Marc.Rousseau@mimio.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/Kconfig

@@ -79,8 +79,6 @@ source "drivers/staging/rtl8192u/Kconfig"
 
 source "drivers/staging/rtl8192e/Kconfig"
 
-source "drivers/staging/mimio/Kconfig"
-
 source "drivers/staging/frontier/Kconfig"
 
 source "drivers/staging/dream/Kconfig"

drivers/staging/Makefile

@@ -22,7 +22,6 @@ obj-$(CONFIG_R8187SE)		+= rtl8187se/
 obj-$(CONFIG_RTL8192SU)		+= rtl8192su/
 obj-$(CONFIG_RTL8192U)		+= rtl8192u/
 obj-$(CONFIG_RTL8192E)		+= rtl8192e/
-obj-$(CONFIG_INPUT_MIMIO)	+= mimio/
 obj-$(CONFIG_TRANZPORT)		+= frontier/
 obj-$(CONFIG_DREAM)		+= dream/
 obj-$(CONFIG_POHMELFS)		+= pohmelfs/

drivers/staging/mimio/Kconfig

@@ -1,10 +0,0 @@
-config INPUT_MIMIO
-	tristate "Mimio Xi interactive whiteboard support"
-	depends on USB && INPUT
-	default N
-	help
-	  Say Y here if you want to use a Mimio Xi interactive
-	  whiteboard device.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mimio.

drivers/staging/mimio/Makefile

@@ -1 +0,0 @@
-obj-$(CONFIG_INPUT_MIMIO)	+= mimio.o

drivers/staging/mimio/mimio.c

@@ -1,896 +0,0 @@
-/*
- * Hardware event => input event mapping:
- *
- * BTN_TOOL_PEN            0x140 black
- * BTN_TOOL_RUBBER         0x141 blue
- * BTN_TOOL_BRUSH          0x142 green
- * BTN_TOOL_PENCIL         0x143 red
- * BTN_TOOL_AIRBRUSH       0x144 eraser
- * BTN_TOOL_FINGER         0x145 small eraser
- * BTN_TOOL_MOUSE          0x146 mimio interactive
- * BTN_TOOL_LENS           0x147 mimio interactive but1
- * LOCALBTN_TOOL_EXTRA1    0x14a mimio interactive but2 == BTN_TOUCH
- * LOCALBTN_TOOL_EXTRA2    0x14b mimio extra pens (orange, brown, yellow,
- *				 purple) == BTN_STYLUS
- * LOCALBTN_TOOL_EXTRA3    0x14c unused == BTN_STYLUS2
- * BTN_TOOL_DOUBLETAP      0x14d unused
- * BTN_TOOL_TRIPLETAP      0x14e unused
- *
- * MIMIO_EV_PENDOWN(MIMIO_PEN_K)	=> EV_KEY BIT(BTN_TOOL_PEN)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_B)	=> EV_KEY BIT(BTN_TOOL_RUBBER)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_G)	=> EV_KEY BIT(BTN_TOOL_BRUSH)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_R)	=> EV_KEY BIT(BTN_TOOL_PENCIL)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_E)	=> EV_KEY BIT(BTN_TOOL_AIRBRUSH)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_ES)	=> EV_KEY BIT(BTN_TOOL_FINGER)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_I)	=> EV_KEY BIT(BTN_TOOL_MOUSE)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_IL)	=> EV_KEY BIT(BTN_TOOL_LENS)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_IR)	=> EV_KEY BIT(BTN_TOOL_DOUBLETAP)
- * MIMIO_EV_PENDOWN(MIMIO_PEN_EX)	=> EV_KEY BIT(BTN_TOOL_TRIPLETAP)
- * MIMIO_EV_PENDATA		=> EV_ABS BIT(ABS_X), BIT(ABS_Y)
- * MIMIO_EV_MEMRESET		=> EV_KEY BIT(BTN_0)
- * MIMIO_EV_ACC(ACC_NEWPAGE)	=> EV_KEY BIT(BTN_1)
- * MIMIO_EV_ACC(ACC_TAGPAGE)	=> EV_KEY BIT(BTN_2)
- * MIMIO_EV_ACC(ACC_PRINTPAGE)	=> EV_KEY BIT(BTN_3)
- * MIMIO_EV_ACC(ACC_MAXIMIZE)	=> EV_KEY BIT(BTN_4)
- * MIMIO_EV_ACC(ACC_FINDCTLPNL)	=> EV_KEY BIT(BTN_5)
- *
- * open issues:
- * - cold-load of data captured when mimio in standalone mode not yet
- *   supported; need to snoop Win32 box to see datastream for this.
- * - mimio mouse not yet supported; need to snoop Win32 box to see the
- *   datastream for this.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/input.h>
-#include <linux/usb.h>
-
-#define DRIVER_VERSION		"v0.031"
-#define DRIVER_AUTHOR		"mwilder@cs.nmsu.edu"
-#define DRIVER_DESC		"USB mimio-xi driver"
-
-enum {UPVALUE, DOWNVALUE, MOVEVALUE};
-
-#define MIMIO_XRANGE_MAX	9600
-#define MIMIO_YRANGE_MAX	4800
-
-#define LOCALBTN_TOOL_EXTRA1	BTN_TOUCH
-#define LOCALBTN_TOOL_EXTRA2	BTN_STYLUS
-#define LOCALBTN_TOOL_EXTRA3	BTN_STYLUS2
-
-#define MIMIO_VENDOR_ID		0x08d3
-#define MIMIO_PRODUCT_ID	0x0001
-#define MIMIO_MAXPAYLOAD	(8)
-#define MIMIO_MAXNAMELEN	(64)
-#define MIMIO_TXWAIT		(1)
-#define MIMIO_TXDONE		(2)
-
-#define MIMIO_EV_PENDOWN	(0x22)
-#define MIMIO_EV_PENDATA	(0x24)
-#define MIMIO_EV_PENUP		(0x51)
-#define MIMIO_EV_MEMRESET	(0x45)
-#define MIMIO_EV_ACC		(0xb2)
-
-#define MIMIO_PEN_K		(1)	/* black pen */
-#define MIMIO_PEN_B		(2)	/* blue pen */
-#define MIMIO_PEN_G		(3)	/* green pen */
-#define MIMIO_PEN_R		(4)	/* red pen */
-/* 5, 6, 7, 8 are extra pens */
-#define MIMIO_PEN_E		(9)	/* big eraser */
-#define MIMIO_PEN_ES		(10)	/* lil eraser */
-#define MIMIO_PENJUMP_START	(10)
-#define MIMIO_PENJUMP		(6)
-#define MIMIO_PEN_I		(17)	/* mimio interactive */
-#define MIMIO_PEN_IL		(18)	/* mimio interactive button 1 */
-#define MIMIO_PEN_IR		(19)	/* mimio interactive button 2 */
-
-#define MIMIO_PEN_MAX		(MIMIO_PEN_IR)
-
-#define ACC_DONE		(0)
-#define ACC_NEWPAGE		(1)
-#define ACC_TAGPAGE		(2)
-#define ACC_PRINTPAGE		(4)
-#define ACC_MAXIMIZE		(8)
-#define ACC_FINDCTLPNL		(16)
-
-#define isvalidtxsize(n)	((n) > 0 && (n) <= MIMIO_MAXPAYLOAD)
-
-
-struct pktbuf {
-	unsigned char instr;
-	unsigned char buf[16];
-	unsigned char *p;
-	unsigned char *q;
-};
-
-struct usbintendpt {
-	dma_addr_t dma;
-	struct urb *urb;
-	unsigned char *buf;
-	struct usb_endpoint_descriptor *desc;
-};
-
-struct mimio {
-	struct input_dev *idev;
-	struct usb_device *udev;
-	struct usb_interface *uifc;
-	int open;
-	int present;
-	int greeted;
-	int txflags;
-	char phys[MIMIO_MAXNAMELEN];
-	struct usbintendpt in;
-	struct usbintendpt out;
-	struct pktbuf pktbuf;
-	unsigned char minor;
-	wait_queue_head_t waitq;
-	spinlock_t txlock;
-	void (*rxhandler)(struct mimio *, unsigned char *, unsigned int);
-	int last_pen_down;
-};
-
-static void mimio_close(struct input_dev *);
-static void mimio_dealloc(struct mimio *);
-static void mimio_disconnect(struct usb_interface *);
-static int mimio_greet(struct mimio *);
-static void mimio_irq_in(struct urb *);
-static void mimio_irq_out(struct urb *);
-static int mimio_open(struct input_dev *);
-static int mimio_probe(struct usb_interface *, const struct usb_device_id *);
-static void mimio_rx_handler(struct mimio *, unsigned char *, unsigned int);
-static int mimio_tx(struct mimio *, const char *, int);
-
-static char mimio_name[] = "VirtualInk mimio-Xi";
-static struct usb_device_id mimio_table[] = {
-	{ USB_DEVICE(MIMIO_VENDOR_ID, MIMIO_PRODUCT_ID) },
-	{ USB_DEVICE(0x0525, 0xa4a0) }, /* gadget zero firmware */
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, mimio_table);
-
-static struct usb_driver mimio_driver = {
-	.name = "mimio",
-	.probe = mimio_probe,
-	.disconnect = mimio_disconnect,
-	.id_table = mimio_table,
-};
-
-static DECLARE_MUTEX(disconnect_sem);
-
-static void mimio_close(struct input_dev *idev)
-{
-	struct mimio *mimio;
-
-	mimio = input_get_drvdata(idev);
-	if (!mimio) {
-		dev_err(&idev->dev, "null mimio attached to input device\n");
-		return;
-	}
-
-	if (mimio->open <= 0)
-		dev_err(&idev->dev, "mimio not open.\n");
-	else
-		mimio->open--;
-
-	if (mimio->present == 0 && mimio->open == 0)
-		mimio_dealloc(mimio);
-}
-
-static void mimio_dealloc(struct mimio *mimio)
-{
-	if (mimio == NULL)
-		return;
-
-	usb_kill_urb(mimio->in.urb);
-
-	usb_kill_urb(mimio->out.urb);
-
-	if (mimio->idev) {
-		input_unregister_device(mimio->idev);
-		if (mimio->idev->grab)
-			input_close_device(mimio->idev->grab);
-		else
-			dev_dbg(&mimio->idev->dev, "mimio->idev->grab == NULL"
-				" -- didn't call input_close_device\n");
-	}
-
-	usb_free_urb(mimio->in.urb);
-
-	usb_free_urb(mimio->out.urb);
-
-	if (mimio->in.buf) {
-		usb_buffer_free(mimio->udev, MIMIO_MAXPAYLOAD, mimio->in.buf,
-				mimio->in.dma);
-	}
-
-	if (mimio->out.buf)
-		usb_buffer_free(mimio->udev, MIMIO_MAXPAYLOAD, mimio->out.buf,
-				mimio->out.dma);
-
-	if (mimio->idev)
-		input_free_device(mimio->idev);
-
-	kfree(mimio);
-}
-
-static void mimio_disconnect(struct usb_interface *ifc)
-{
-	struct mimio *mimio;
-
-	down(&disconnect_sem);
-
-	mimio = usb_get_intfdata(ifc);
-	usb_set_intfdata(ifc, NULL);
-	dev_dbg(&mimio->idev->dev, "disconnect\n");
-
-	if (mimio) {
-		mimio->present = 0;
-
-		if (mimio->open <= 0)
-			mimio_dealloc(mimio);
-	}
-
-	up(&disconnect_sem);
-}
-
-static int mimio_greet(struct mimio *mimio)
-{
-	const struct grtpkt {
-		int nbytes;
-		unsigned delay;
-		char data[8];
-	} grtpkts[] = {
-		{ 3, 0, { 0x11, 0x55, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00 } },
-		{ 5, 0, { 0x53, 0x55, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00 } },
-		{ 5, 0, { 0x43, 0x55, 0x00, 0x00, 0x16, 0x00, 0x00, 0x00 } },
-		{ 5, 0, { 0x33, 0x55, 0x00, 0x00, 0x66, 0x00, 0x00, 0x00 } },
-		{ 5, 0, { 0x13, 0x00, 0x5e, 0x02, 0x4f, 0x00, 0x00, 0x00 } },
-		{ 5, 0, { 0x13, 0x00, 0x04, 0x03, 0x14, 0x00, 0x00, 0x00 } },
-		{ 5, 2, { 0x13, 0x00, 0x00, 0x04, 0x17, 0x00, 0x00, 0x00 } },
-		{ 5, 0, { 0x13, 0x00, 0x0d, 0x08, 0x16, 0x00, 0x00, 0x00 } },
-		{ 5, 0, { 0x13, 0x00, 0x4d, 0x01, 0x5f, 0x00, 0x00, 0x00 } },
-		{ 3, 0, { 0xf1, 0x55, 0xa4, 0x00, 0x00, 0x00, 0x00, 0x00 } },
-		{ 7, 2, { 0x52, 0x55, 0x00, 0x07, 0x31, 0x55, 0x64, 0x00 } },
-		{ 0, 0, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } },
-	};
-	int rslt;
-	const struct grtpkt *pkt;
-
-	for (pkt = grtpkts; pkt->nbytes; pkt++) {
-		rslt = mimio_tx(mimio, pkt->data, pkt->nbytes);
-		if (rslt)
-			return rslt;
-		if (pkt->delay)
-			msleep(pkt->delay);
-	}
-
-	return 0;
-}
-
-static void mimio_irq_in(struct urb *urb)
-{
-	int rslt;
-	char *data;
-	const char *reason = "going down";
-	struct mimio *mimio;
-
-	mimio = urb->context;
-
-	if (mimio == NULL)
-		/* paranoia */
-		return;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ETIMEDOUT:
-		reason = "timeout -- unplugged?";
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		dev_dbg(&mimio->idev->dev, "%s.\n", reason);
-		return;
-	default:
-		dev_dbg(&mimio->idev->dev, "unknown urb-status: %d.\n",
-			urb->status);
-		goto exit;
-	}
-	data = mimio->in.buf;
-
-	if (mimio->rxhandler)
-		mimio->rxhandler(mimio, data, urb->actual_length);
-exit:
-	/*
-	 * Keep listening to device on same urb.
-	 */
-	rslt = usb_submit_urb(urb, GFP_ATOMIC);
-	if (rslt)
-		dev_err(&mimio->idev->dev, "usb_submit_urb failure: %d.\n",
-			rslt);
-}
-
-static void mimio_irq_out(struct urb *urb)
-{
-	unsigned long flags;
-	struct mimio *mimio;
-
-	mimio = urb->context;
-
-	if (urb->status)
-		dev_dbg(&mimio->idev->dev, "urb-status: %d.\n", urb->status);
-
-	spin_lock_irqsave(&mimio->txlock, flags);
-	mimio->txflags |= MIMIO_TXDONE;
-	spin_unlock_irqrestore(&mimio->txlock, flags);
-	wmb();
-	wake_up(&mimio->waitq);
-}
-
-static int mimio_open(struct input_dev *idev)
-{
-	int rslt;
-	struct mimio *mimio;
-
-	rslt = 0;
-	down(&disconnect_sem);
-	mimio = input_get_drvdata(idev);
-	dev_dbg(&idev->dev, "mimio_open\n");
-
-	if (mimio == NULL) {
-		dev_err(&idev->dev, "null mimio.\n");
-		rslt = -ENODEV;
-		goto exit;
-	}
-
-	if (mimio->open++)
-		goto exit;
-
-	if (mimio->present && !mimio->greeted) {
-		struct urb *urb = mimio->in.urb;
-		mimio->in.urb->dev = mimio->udev;
-		rslt = usb_submit_urb(mimio->in.urb, GFP_KERNEL);
-		if (rslt) {
-			dev_err(&idev->dev, "usb_submit_urb failure "
-					"(res = %d: ", rslt);
-			if (!urb)
-				dev_err(&idev->dev, "urb is NULL");
-			else if (urb->hcpriv)
-				dev_err(&idev->dev, "urb->hcpriv is non-NULL");
-			else if (!urb->complete)
-				dev_err(&idev->dev, "urb is not complete");
-			else if (urb->number_of_packets <= 0)
-				dev_err(&idev->dev, "urb has no packets");
-			else if (urb->interval <= 0)
-				dev_err(&idev->dev, "urb interval too small");
-			else
-				dev_err(&idev->dev, "urb interval too large " \
-						"or some other error");
-			dev_err(&idev->dev, "). Not greeting.\n");
-			rslt = -EIO;
-			goto exit;
-		}
-		rslt = mimio_greet(mimio);
-		if (rslt == 0) {
-			dev_dbg(&idev->dev, "Mimio greeted OK.\n");
-			mimio->greeted = 1;
-		} else {
-			dev_dbg(&idev->dev, "Mimio greet Failure (%d)\n",
-				rslt);
-		}
-	}
-
-exit:
-	up(&disconnect_sem);
-	return rslt;
-}
-
-static int mimio_probe(struct usb_interface *ifc,
-		       const struct usb_device_id *id)
-{
-	char path[64];
-	int pipe, maxp;
-	struct mimio *mimio;
-	struct usb_device *udev;
-	struct usb_host_interface *hostifc;
-	struct input_dev *input_dev;
-	int res = 0;
-	int i;
-
-	udev = interface_to_usbdev(ifc);
-
-	mimio = kzalloc(sizeof(struct mimio), GFP_KERNEL);
-	if (!mimio)
-		return -ENOMEM;
-
-	input_dev = input_allocate_device();
-	if (!input_dev) {
-		mimio_dealloc(mimio);
-		return -ENOMEM;
-	}
-
-	mimio->uifc = ifc;
-	mimio->udev = udev;
-	mimio->pktbuf.p = mimio->pktbuf.buf;
-	mimio->pktbuf.q = mimio->pktbuf.buf;
-	/* init_input_dev(mimio->idev); */
-	mimio->idev = input_dev;
-	init_waitqueue_head(&mimio->waitq);
-	spin_lock_init(&mimio->txlock);
-	hostifc = ifc->cur_altsetting;
-
-	if (hostifc->desc.bNumEndpoints != 2) {
-		dev_err(&udev->dev, "Unexpected endpoint count: %d.\n",
-			hostifc->desc.bNumEndpoints);
-		mimio_dealloc(mimio);
-		return -ENODEV;
-	}
-
-	mimio->in.desc = &(hostifc->endpoint[0].desc);
-	mimio->out.desc = &(hostifc->endpoint[1].desc);
-
-	mimio->in.buf = usb_buffer_alloc(udev, MIMIO_MAXPAYLOAD, GFP_KERNEL,
-					 &mimio->in.dma);
-	mimio->out.buf = usb_buffer_alloc(udev, MIMIO_MAXPAYLOAD, GFP_KERNEL,
-					  &mimio->out.dma);
-
-	if (mimio->in.buf == NULL || mimio->out.buf == NULL) {
-		dev_err(&udev->dev, "usb_buffer_alloc failure.\n");
-		mimio_dealloc(mimio);
-		return -ENOMEM;
-	}
-
-	mimio->in.urb = usb_alloc_urb(0, GFP_KERNEL);
-	mimio->out.urb = usb_alloc_urb(0, GFP_KERNEL);
-
-	if (mimio->in.urb == NULL || mimio->out.urb == NULL) {
-		dev_err(&udev->dev, "usb_alloc_urb failure.\n");
-		mimio_dealloc(mimio);
-		return -ENOMEM;
-	}
-
-	/*
-	 * Build the input urb.
-	 */
-	pipe = usb_rcvintpipe(udev, mimio->in.desc->bEndpointAddress);
-	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-	if (maxp > MIMIO_MAXPAYLOAD)
-		maxp = MIMIO_MAXPAYLOAD;
-	usb_fill_int_urb(mimio->in.urb, udev, pipe, mimio->in.buf, maxp,
-			 mimio_irq_in, mimio, mimio->in.desc->bInterval);
-	mimio->in.urb->transfer_dma = mimio->in.dma;
-	mimio->in.urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	/*
-	 * Build the output urb.
-	 */
-	pipe = usb_sndintpipe(udev, mimio->out.desc->bEndpointAddress);
-	maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
-	if (maxp > MIMIO_MAXPAYLOAD)
-		maxp = MIMIO_MAXPAYLOAD;
-	usb_fill_int_urb(mimio->out.urb, udev, pipe, mimio->out.buf, maxp,
-			 mimio_irq_out, mimio, mimio->out.desc->bInterval);
-	mimio->out.urb->transfer_dma = mimio->out.dma;
-	mimio->out.urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	/*
-	 * Build input device info
-	 */
-	usb_make_path(udev, path, 64);
-	snprintf(mimio->phys, MIMIO_MAXNAMELEN, "%s/input0", path);
-	input_set_drvdata(input_dev, mimio);
-	/* input_dev->dev = &ifc->dev; */
-	input_dev->open = mimio_open;
-	input_dev->close = mimio_close;
-	input_dev->name = mimio_name;
-	input_dev->phys = mimio->phys;
-	input_dev->dev.parent = &ifc->dev;
-
-	input_dev->id.bustype = BUS_USB;
-	input_dev->id.vendor = le16_to_cpu(udev->descriptor.idVendor);
-	input_dev->id.product = le16_to_cpu(udev->descriptor.idProduct);
-	input_dev->id.version = le16_to_cpu(udev->descriptor.bcdDevice);
-
-	input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
-	for (i = BTN_TOOL_PEN; i <= LOCALBTN_TOOL_EXTRA2; ++i)
-		set_bit(i, input_dev->keybit);
-
-	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
-						 BIT_MASK(BTN_1) |
-						 BIT_MASK(BTN_2) |
-						 BIT_MASK(BTN_3) |
-						 BIT_MASK(BTN_4) |
-						 BIT_MASK(BTN_5);
-	/*   input_dev->keybit[BTN_MOUSE] |= BIT(BTN_LEFT); */
-	input_dev->absbit[0] |= BIT_MASK(ABS_X) | BIT_MASK(ABS_Y);
-	input_set_abs_params(input_dev, ABS_X, 0, MIMIO_XRANGE_MAX, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, MIMIO_YRANGE_MAX, 0, 0);
-	input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
-
-	/*
-	 * Register the input device.
-	 */
-	res = input_register_device(mimio->idev);
-	if (res) {
-		dev_err(&udev->dev, "input_register_device failure (%d)\n",
-			res);
-		mimio_dealloc(mimio);
-		return -EIO;
-	}
-	dev_dbg(&mimio->idev->dev, "input: %s on %s (res = %d).\n",
-		input_dev->name, input_dev->phys, res);
-
-	usb_set_intfdata(ifc, mimio);
-	mimio->present = 1;
-
-	/*
-	 * Submit the input urb to the usb subsystem.
-	 */
-	mimio->in.urb->dev = mimio->udev;
-	res = usb_submit_urb(mimio->in.urb, GFP_KERNEL);
-	if (res) {
-		dev_err(&mimio->idev->dev, "usb_submit_urb failure (%d)\n",
-			res);
-		mimio_dealloc(mimio);
-		return -EIO;
-	}
-
-	/*
-	 * Attempt to greet the mimio after giving
-	 * it some post-init settling time.
-	 *
-	 * note: sometimes this sleep interval isn't
-	 * long enough to permit the device to re-init
-	 * after a hot-swap; maybe need to bump it up.
-	 *
-	 * As it is, this probably breaks module unloading support!
-	 */
-	msleep(1024);
-
-	res = mimio_greet(mimio);
-	if (res == 0) {
-		dev_dbg(&mimio->idev->dev, "Mimio greeted OK.\n");
-		mimio->greeted = 1;
-		mimio->rxhandler = mimio_rx_handler;
-	} else {
-		dev_dbg(&mimio->idev->dev, "Mimio greet Failure (%d)\n", res);
-	}
-
-	return 0;
-}
-
-static int handle_mimio_rx_penupdown(struct mimio *mimio,
-				     int down,
-				     const char *const instr[],
-				     const int instr_ofst[])
-{
-	int penid, x;
-	if (mimio->pktbuf.q - mimio->pktbuf.p < (down ? 4 : 3))
-		return 1; 		/* partial pkt */
-
-	if (down) {
-		x = *mimio->pktbuf.p ^ *(mimio->pktbuf.p + 1) ^
-			*(mimio->pktbuf.p + 2);
-		if (x != *(mimio->pktbuf.p + 3)) {
-			dev_dbg(&mimio->idev->dev, "EV_PEN%s: bad xsum.\n",
-				down ? "DOWN" : "UP");
-			/* skip this event data */
-			mimio->pktbuf.p += 4;
-			/* decode any remaining events */
-			return 0;
-		}
-		penid = mimio->pktbuf.instr = *(mimio->pktbuf.p + 2);
-		if (penid > MIMIO_PEN_MAX) {
-			dev_dbg(&mimio->idev->dev,
-				"Unmapped penID (not in [0, %d]): %d\n",
-				MIMIO_PEN_MAX, (int)mimio->pktbuf.instr);
-			penid = mimio->pktbuf.instr = 0;
-		}
-		mimio->last_pen_down = penid;
-	} else {
-		penid = mimio->last_pen_down;
-	}
-	dev_dbg(&mimio->idev->dev, "%s (id %d, code %d) %s.\n", instr[penid],
-		instr_ofst[penid], penid, down ? "down" : "up");
-
-	if (instr_ofst[penid] >= 0) {
-		int code = BTN_TOOL_PEN + instr_ofst[penid];
-		int value = down ? DOWNVALUE : UPVALUE;
-		if (code > KEY_MAX)
-			dev_dbg(&mimio->idev->dev, "input_event will ignore "
-				"-- code (%d) > KEY_MAX\n", code);
-		if (!test_bit(code, mimio->idev->keybit))
-			dev_dbg(&mimio->idev->dev, "input_event will ignore "
-				"-- bit for code (%d) not enabled\n", code);
-		if (!!test_bit(code, mimio->idev->key) == value)
-			dev_dbg(&mimio->idev->dev, "input_event will ignore "
-				"-- bit for code (%d) already set to %d\n",
-				code, value);
-		if (value != DOWNVALUE) {
-			/* input_regs(mimio->idev, regs); */
-			input_report_key(mimio->idev, code, value);
-			input_sync(mimio->idev);
-		} else {
-			/* wait until we get some coordinates */
-		}
-	} else {
-		dev_dbg(&mimio->idev->dev, "penID offset[%d] == %d is < 0 "
-			"- not sending\n", penid, instr_ofst[penid]);
-	}
-	mimio->pktbuf.p += down ? 4 : 3; /* 3 for up, 4 for down */
-	return 0;
-}
-
-/*
- * Stay tuned for partial-packet excitement.
- *
- * This routine buffers data packets received from the mimio device
- * in the mimio's data space.  This buffering is necessary because
- * the mimio's in endpoint can serve us partial packets of data, and
- * we want the driver to support the servicing of multiple mimios.
- * Empirical evidence gathered so far suggests that the method of
- * buffering packet data in the mimio's data space works.  Previous
- * versions of this driver did not buffer packet data in each mimio's
- * data-space, and were therefore not able to service multiple mimios.
- * Note that since the caller of this routine is running in interrupt
- * context, care needs to be taken to ensure that this routine does not
- * become bloated, and it may be that another spinlock is needed in each
- * mimio to guard the buffered packet data properly.
- */
-static void mimio_rx_handler(struct mimio *mimio,
-			     unsigned char *data,
-			     unsigned int nbytes)
-{
-	struct device *dev = &mimio->idev->dev;
-	unsigned int x;
-	unsigned int y;
-	static const char * const instr[] = {
-		"?0",
-		"black pen", "blue pen", "green pen", "red pen",
-		"brown pen", "orange pen", "purple pen", "yellow pen",
-		"big eraser", "lil eraser",
-		"?11", "?12", "?13", "?14", "?15", "?16",
-		"mimio interactive", "interactive button1",
-		"interactive button2"
-	};
-
-	/* Mimio Interactive gives:
-	 * down: [0x22 0x01 0x11 0x32 0x24]
-	 * b1  : [0x22 0x01 0x12 0x31 0x24]
-	 * b2  : [0x22 0x01 0x13 0x30 0x24]
-	 */
-	static const int instr_ofst[] = {
-		-1,
-		0, 1, 2, 3,
-		9, 9, 9, 9,
-		4, 5,
-		-1, -1, -1, -1, -1, -1,
-		6, 7, 8,
-	};
-
-	memcpy(mimio->pktbuf.q, data, nbytes);
-	mimio->pktbuf.q += nbytes;
-
-	while (mimio->pktbuf.p < mimio->pktbuf.q) {
-		int t = *mimio->pktbuf.p;
-		switch (t) {
-		case MIMIO_EV_PENUP:
-		case MIMIO_EV_PENDOWN:
-			if (handle_mimio_rx_penupdown(mimio,
-						      t == MIMIO_EV_PENDOWN,
-						      instr, instr_ofst))
-				return; /* partial packet */
-			break;
-
-		case MIMIO_EV_PENDATA:
-			if (mimio->pktbuf.q - mimio->pktbuf.p < 6)
-				/* partial pkt */
-				return;
-			x = *mimio->pktbuf.p ^ *(mimio->pktbuf.p + 1) ^
-				*(mimio->pktbuf.p + 2) ^
-				*(mimio->pktbuf.p + 3) ^
-				*(mimio->pktbuf.p + 4);
-			if (x != *(mimio->pktbuf.p + 5)) {
-				dev_dbg(dev, "EV_PENDATA: bad xsum.\n");
-				mimio->pktbuf.p += 6; /* skip this event data */
-				break; /* decode any remaining events */
-			}
-			x = *(mimio->pktbuf.p + 1);
-			x <<= 8;
-			x |= *(mimio->pktbuf.p + 2);
-			y = *(mimio->pktbuf.p + 3);
-			y <<= 8;
-			y |= *(mimio->pktbuf.p + 4);
-			dev_dbg(dev, "coord: (%d, %d)\n", x, y);
-			if (instr_ofst[mimio->pktbuf.instr] >= 0) {
-				int code = BTN_TOOL_PEN +
-					   instr_ofst[mimio->last_pen_down];
-				/* input_regs(mimio->idev, regs); */
-				input_report_abs(mimio->idev, ABS_X, x);
-				input_report_abs(mimio->idev, ABS_Y, y);
-				/* fake a penup */
-				change_bit(code, mimio->idev->key);
-				input_report_key(mimio->idev,
-						 code,
-						 DOWNVALUE);
-				/* always sync here */
-				mimio->idev->sync = 0;
-				input_sync(mimio->idev);
-			}
-			mimio->pktbuf.p += 6;
-			break;
-		case MIMIO_EV_MEMRESET:
-			if (mimio->pktbuf.q - mimio->pktbuf.p < 7)
-				/* partial pkt */
-				return;
-			dev_dbg(dev, "mem-reset.\n");
-			/* input_regs(mimio->idev, regs); */
-			input_event(mimio->idev, EV_KEY, BTN_0, 1);
-			input_event(mimio->idev, EV_KEY, BTN_0, 0);
-			input_sync(mimio->idev);
-			mimio->pktbuf.p += 7;
-			break;
-		case MIMIO_EV_ACC:
-			if (mimio->pktbuf.q - mimio->pktbuf.p < 4)
-				/* partial pkt */
-				return;
-			x = *mimio->pktbuf.p ^ *(mimio->pktbuf.p + 1) ^
-				*(mimio->pktbuf.p + 2);
-			if (x != *(mimio->pktbuf.p + 3)) {
-				dev_dbg(dev, "EV_ACC: bad xsum.\n");
-				mimio->pktbuf.p += 4; /* skip this event data */
-				break; /* decode any remaining events */
-			}
-			switch (*(mimio->pktbuf.p + 2)) {
-			case ACC_NEWPAGE:
-				dev_dbg(&mimio->idev->dev, "new-page.\n");
-				/* input_regs(mimio->idev, regs); */
-				input_event(mimio->idev, EV_KEY, BTN_1, 1);
-				input_event(mimio->idev, EV_KEY, BTN_1, 0);
-				input_sync(mimio->idev);
-				break;
-			case ACC_TAGPAGE:
-				dev_dbg(&mimio->idev->dev, "tag-page.\n");
-				/* input_regs(mimio->idev, regs); */
-				input_event(mimio->idev, EV_KEY, BTN_2, 1);
-				input_event(mimio->idev, EV_KEY, BTN_2, 0);
-				input_sync(mimio->idev);
-				break;
-			case ACC_PRINTPAGE:
-				dev_dbg(&mimio->idev->dev, "print-page.\n");
-				/* input_regs(mimio->idev, regs);*/
-				input_event(mimio->idev, EV_KEY, BTN_3, 1);
-				input_event(mimio->idev, EV_KEY, BTN_3, 0);
-				input_sync(mimio->idev);
-				break;
-			case ACC_MAXIMIZE:
-				dev_dbg(&mimio->idev->dev,
-					"maximize-window.\n");
-				/* input_regs(mimio->idev, regs); */
-				input_event(mimio->idev, EV_KEY, BTN_4, 1);
-				input_event(mimio->idev, EV_KEY, BTN_4, 0);
-				input_sync(mimio->idev);
-				break;
-			case ACC_FINDCTLPNL:
-				dev_dbg(&mimio->idev->dev, "find-ctl-panel.\n");
-				/* input_regs(mimio->idev, regs); */
-				input_event(mimio->idev, EV_KEY, BTN_5, 1);
-				input_event(mimio->idev, EV_KEY, BTN_5, 0);
-				input_sync(mimio->idev);
-				break;
-			case ACC_DONE:
-				dev_dbg(&mimio->idev->dev, "acc-done.\n");
-				/* no event is dispatched to the input
-				 * subsystem for this device event.
-				 */
-				break;
-			default:
-				dev_dbg(dev, "unknown acc event.\n");
-				break;
-			}
-			mimio->pktbuf.p += 4;
-			break;
-		default:
-			mimio->pktbuf.p++;
-			break;
-		}
-	}
-
-	/*
-	 * No partial event was received, so reset mimio's pktbuf ptrs.
-	 */
-	mimio->pktbuf.p = mimio->pktbuf.q = mimio->pktbuf.buf;
-}
-
-static int mimio_tx(struct mimio *mimio, const char *buf, int nbytes)
-{
-	int rslt;
-	int timeout;
-	unsigned long flags;
-	DECLARE_WAITQUEUE(wait, current);
-
-	if (!(isvalidtxsize(nbytes))) {
-		dev_err(&mimio->idev->dev, "invalid arg: nbytes: %d.\n",
-			nbytes);
-		return -EINVAL;
-	}
-
-	/*
-	 * Init the out urb and copy the data to send.
-	 */
-	mimio->out.urb->dev = mimio->udev;
-	mimio->out.urb->transfer_buffer_length = nbytes;
-	memcpy(mimio->out.urb->transfer_buffer, buf, nbytes);
-
-	/*
-	 * Send the data.
-	 */
-	spin_lock_irqsave(&mimio->txlock, flags);
-	mimio->txflags = MIMIO_TXWAIT;
-	rslt = usb_submit_urb(mimio->out.urb, GFP_ATOMIC);
-	spin_unlock_irqrestore(&mimio->txlock, flags);
-	dev_dbg(&mimio->idev->dev, "rslt: %d.\n", rslt);
-
-	if (rslt) {
-		dev_err(&mimio->idev->dev, "usb_submit_urb failure: %d.\n",
-			rslt);
-		return rslt;
-	}
-
-	/*
-	 * Wait for completion to be signalled (the mimio_irq_out
-	 * completion routine will or MIMIO_TXDONE in with txflags).
-	 */
-	timeout = HZ;
-	set_current_state(TASK_INTERRUPTIBLE);
-	add_wait_queue(&mimio->waitq, &wait);
-
-	while (timeout && ((mimio->txflags & MIMIO_TXDONE) == 0)) {
-		timeout = schedule_timeout(timeout);
-		rmb();
-	}
-
-	if ((mimio->txflags & MIMIO_TXDONE) == 0)
-		dev_dbg(&mimio->idev->dev, "tx timed out.\n");
-
-	/*
-	 * Now that completion has been signalled,
-	 * unlink the urb so that it can be recycled.
-	 */
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&mimio->waitq, &wait);
-	usb_unlink_urb(mimio->out.urb);
-
-	return rslt;
-}
-
-static int __init mimio_init(void)
-{
-	int rslt;
-
-	rslt = usb_register(&mimio_driver);
-	if (rslt != 0) {
-		err("%s: usb_register failure: %d", __func__, rslt);
-		return rslt;
-	}
-
-	printk(KERN_INFO KBUILD_MODNAME ":"
-	       DRIVER_DESC " " DRIVER_VERSION "\n");
-	return rslt;
-}
-
-static void __exit mimio_exit(void)
-{
-	usb_deregister(&mimio_driver);
-}
-
-module_init(mimio_init);
-module_exit(mimio_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");