Merge tag 'omap-cleanup-devices-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup2

Changes to split plat-omap/devices.c into mach-omap1 and mach-omap2
except for the RNG driver that will be done later on.

As this depends on omap-devel-hwmod-data-for-v3.5 and causes merge
conflict with omap-fixes-non-critical-for-v3.5, this branch is based
on merge of the two.

By Tony Lindgren (7) and others
via Tony Lindgren (4) and Paul Walmsley (1)
* tag 'omap-cleanup-devices-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits)
  ARM: OMAP1: Pass dma request lines in platform data to MMC driver
  ARM: OMAP: Move omap_mmc_add() to mach-omap1
  ARM: OMAP2: Use hwmod to initialize mmc for 2420
  ARM: OMAP2+: Move omap_dsp_reserve_sdram_memblock() to mach-omap2
  ARM: OMAP1: Move omap_init_uwire to mach-omap1
  ARM: OMAP1: Move omap_init_audio() to keep the devices in alphabetical order
  ARM: OMAP2+: WDTIMER integration: fix !PM boot crash, disarm timer after hwmod reset
  ARM: OMAP2/3: hwmod data: Add 32k-sync timer data to hwmod database
  ARM: OMAP4: hwmod_data: Name the common irq for McBSP ports
  ARM: OMAP4: hwmod data: I2C: add flag for context restore
  ARM: OMAP3: hwmod_data: Rename the common irq for McBSP ports
  ARM: OMAP2xxx: hwmod data: add HDQ/1-wire hwmod
  ARM: OMAP3: hwmod data: add HDQ/1-wire hwmod
  ARM: OMAP2+: hwmod data: add HDQ/1-wire hwmod shared data
  ARM: OMAP2+: HDQ1W: add custom reset function
  ARM: OMAP2420: hwmod data: Add MMC hwmod data for 2420
  arm: omap3: clockdomain data: Remove superfluous commas from gfx_sgx_3xxx_wkdeps[]
  ARM: OMAP2+: powerdomain: Get rid off duplicate pwrdm_clkdm_state_switch() API
  ARM: OMAP3: clock data: add clockdomain for HDQ functional clock
  ARM: OMAP3+: dpll: Configure autoidle mode only if it's supported
  ...

arch/arm/mach-omap1/devices.c

@@ -22,6 +22,7 @@
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>
+#include <plat/dma.h>
 #include <plat/mmc.h>
 #include <plat/omap7xx.h>
 
@@ -31,6 +32,22 @@
 #include "common.h"
 #include "clock.h"
 
+#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+
+static struct platform_device omap_pcm = {
+	.name	= "omap-pcm-audio",
+	.id	= -1,
+};
+
+static void omap_init_audio(void)
+{
+	platform_device_register(&omap_pcm);
+}
+
+#else
+static inline void omap_init_audio(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -128,6 +145,56 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 	}
 }
 
+#define OMAP_MMC_NR_RES		4
+
+/*
+ * Register MMC devices.
+ */
+static int __init omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				unsigned rx_req, unsigned tx_req,
+				struct omap_mmc_platform_data *data)
+{
+	struct platform_device *pdev;
+	struct resource res[OMAP_MMC_NR_RES];
+	int ret;
+
+	pdev = platform_device_alloc(name, id);
+	if (!pdev)
+		return -ENOMEM;
+
+	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
+	res[0].start = base;
+	res[0].end = base + size - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = res[1].end = irq;
+	res[1].flags = IORESOURCE_IRQ;
+	res[2].start = rx_req;
+	res[2].name = "rx";
+	res[2].flags = IORESOURCE_DMA;
+	res[3].start = tx_req;
+	res[3].name = "tx";
+	res[3].flags = IORESOURCE_DMA;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret == 0)
+		ret = platform_device_add_data(pdev, data, sizeof(*data));
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto fail;
+
+	/* return device handle to board setup code */
+	data->dev = &pdev->dev;
+	return 0;
+
+fail:
+	platform_device_put(pdev);
+	return ret;
+}
+
 void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 			int nr_controllers)
 {
@@ -135,6 +202,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 
 	for (i = 0; i < nr_controllers; i++) {
 		unsigned long base, size;
+		unsigned rx_req, tx_req;
 		unsigned int irq = 0;
 
 		if (!mmc_data[i])
@@ -146,19 +214,24 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 		case 0:
 			base = OMAP1_MMC1_BASE;
 			irq = INT_MMC;
+			rx_req = OMAP_DMA_MMC_RX;
+			tx_req = OMAP_DMA_MMC_TX;
 			break;
 		case 1:
 			if (!cpu_is_omap16xx())
 				return;
 			base = OMAP1_MMC2_BASE;
 			irq = INT_1610_MMC2;
+			rx_req = OMAP_DMA_MMC2_RX;
+			tx_req = OMAP_DMA_MMC2_TX;
 			break;
 		default:
 			continue;
 		}
 		size = OMAP1_MMC_SIZE;
 
-		omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
+		omap_mmc_add("mmci-omap", i, base, size, irq,
+				rx_req, tx_req, mmc_data[i]);
 	};
 }
 
@@ -242,23 +315,48 @@ void __init omap1_camera_init(void *info)
 
 static inline void omap_init_sti(void) {}
 
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+/* Numbering for the SPI-capable controllers when used for SPI:
+ * spi		= 1
+ * uwire	= 2
+ * mmc1..2	= 3..4
+ * mcbsp1..3	= 5..7
+ */
 
-static struct platform_device omap_pcm = {
-	.name	= "omap-pcm-audio",
-	.id	= -1,
+#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
+
+#define	OMAP_UWIRE_BASE		0xfffb3000
+
+static struct resource uwire_resources[] = {
+	{
+		.start		= OMAP_UWIRE_BASE,
+		.end		= OMAP_UWIRE_BASE + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
 };
 
-static void omap_init_audio(void)
+static struct platform_device omap_uwire_device = {
+	.name	   = "omap_uwire",
+	.id	     = -1,
+	.num_resources	= ARRAY_SIZE(uwire_resources),
+	.resource	= uwire_resources,
+};
+
+static void omap_init_uwire(void)
 {
-	platform_device_register(&omap_pcm);
-}
+	/* FIXME define and use a boot tag; not all boards will be hooking
+	 * up devices to the microwire controller, and multi-board configs
+	 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
+	 */
 
+	/* board-specific code must configure chipselects (only a few
+	 * are normally used) and SCLK/SDI/SDO (each has two choices).
+	 */
+	(void) platform_device_register(&omap_uwire_device);
+}
 #else
-static inline void omap_init_audio(void) {}
+static inline void omap_init_uwire(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
 
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
@@ -292,11 +390,12 @@ static int __init omap1_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 
+	omap_init_audio();
 	omap_init_mbox();
 	omap_init_rtc();
 	omap_init_spi100k();
 	omap_init_sti();
-	omap_init_audio();
+	omap_init_uwire();
 
 	return 0;
 }

arch/arm/mach-omap2/Makefile

@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o display.o i2c.o
+	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
 
 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
@@ -186,6 +186,9 @@ ifneq ($(CONFIG_TIDSPBRIDGE),)
 obj-y					+= dsp.o
 endif
 
+# OMAP2420 MSDI controller integration support ("MMC")
+obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o

arch/arm/mach-omap2/clock.c

@@ -439,7 +439,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 		clk->ops->disable(clk);
 	}
 	if (clk->clkdm != NULL)
-		pwrdm_clkdm_state_switch(clk->clkdm);
+		pwrdm_state_switch(clk->clkdm->pwrdm.ptr);
 }
 #endif
 

arch/arm/mach-omap2/clock3xxx_data.c

@@ -1,7 +1,7 @@
 /*
  * OMAP3 clock data
  *
- * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010, 2012 Texas Instruments, Inc.
  * Copyright (C) 2007-2011 Nokia Corporation
  *
  * Written by Paul Walmsley
@@ -1640,6 +1640,7 @@ static struct clk hdq_fck = {
 	.name		= "hdq_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_12m_fck,
+	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
 	.recalc		= &followparent_recalc,
@@ -3294,8 +3295,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
 	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
 	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
-	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2PLUS | CK_3517 | CK_36XX),
-	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2PLUS | CK_3517 | CK_36XX),
+	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
 	CLK(NULL,	"modem_fck",	&modem_fck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_34XX | CK_36XX),
@@ -3419,7 +3420,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_3XXX),
 	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_3XXX),
 	CLK(NULL,	"uart4_fck",	&uart4_fck,	CK_36XX),
-	CLK(NULL,	"uart4_fck",	&uart4_fck_am35xx, CK_3505 | CK_3517),
+	CLK(NULL,	"uart4_fck",	&uart4_fck_am35xx, CK_AM35XX),
 	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_3XXX),
 	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_3XXX),
 	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_3XXX),
@@ -3513,21 +3514,9 @@ int __init omap3xxx_clk_init(void)
 	struct omap_clk *c;
 	u32 cpu_clkflg = 0;
 
-	/*
-	 * 3505 must be tested before 3517, since 3517 returns true
-	 * for both AM3517 chips and AM3517 family chips, which
-	 * includes 3505.  Unfortunately there's no obvious family
-	 * test for 3517/3505 :-(
-	 */
-	if (cpu_is_omap3505()) {
-		cpu_mask = RATE_IN_34XX;
-		cpu_clkflg = CK_3505;
-	} else if (cpu_is_omap3517()) {
-		cpu_mask = RATE_IN_34XX;
-		cpu_clkflg = CK_3517;
-	} else if (cpu_is_omap3505()) {
+	if (cpu_is_omap3517()) {
 		cpu_mask = RATE_IN_34XX;
-		cpu_clkflg = CK_3505;
+		cpu_clkflg = CK_AM35XX;
 	} else if (cpu_is_omap3630()) {
 		cpu_mask = (RATE_IN_34XX | RATE_IN_36XX);
 		cpu_clkflg = CK_36XX;

arch/arm/mach-omap2/clock44xx_data.c

@@ -3355,17 +3355,6 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck,	CK_443X),
 	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck,	CK_443X),
 	CLK(NULL,	"gpmc_ck",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt1_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt2_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt3_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt4_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt5_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt6_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt7_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt8_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt9_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt10_ick",			&dummy_ck,	CK_443X),
-	CLK(NULL,	"gpt11_ick",			&dummy_ck,	CK_443X),
 	CLK("omap_i2c.1",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.2",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_i2c.3",	"ick",				&dummy_ck,	CK_443X),

arch/arm/mach-omap2/clockdomain.c

@@ -840,7 +840,7 @@ void clkdm_allow_idle(struct clockdomain *clkdm)
 	spin_lock_irqsave(&clkdm->lock, flags);
 	clkdm->_flags |= _CLKDM_FLAG_HWSUP_ENABLED;
 	arch_clkdm->clkdm_allow_idle(clkdm);
-	pwrdm_clkdm_state_switch(clkdm);
+	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 }
 
@@ -924,8 +924,7 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm)
 
 	spin_lock_irqsave(&clkdm->lock, flags);
 	arch_clkdm->clkdm_clk_enable(clkdm);
-	pwrdm_wait_transition(clkdm->pwrdm.ptr);
-	pwrdm_clkdm_state_switch(clkdm);
+	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 
 	pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name);
@@ -950,7 +949,7 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm)
 
 	spin_lock_irqsave(&clkdm->lock, flags);
 	arch_clkdm->clkdm_clk_disable(clkdm);
-	pwrdm_clkdm_state_switch(clkdm);
+	pwrdm_state_switch(clkdm->pwrdm.ptr);
 	spin_unlock_irqrestore(&clkdm->lock, flags);
 
 	pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name);

arch/arm/mach-omap2/clockdomains3xxx_data.c

@@ -53,9 +53,9 @@
  * 3430ES2 PM_WKDEP_SGX: adds IVA2, removes CORE
  */
 static struct clkdm_dep gfx_sgx_3xxx_wkdeps[] = {
-	{ .clkdm_name = "iva2_clkdm", },
-	{ .clkdm_name = "mpu_clkdm", },
-	{ .clkdm_name = "wkup_clkdm", },
+	{ .clkdm_name = "iva2_clkdm" },
+	{ .clkdm_name = "mpu_clkdm" },
+	{ .clkdm_name = "wkup_clkdm" },
 	{ NULL },
 };
 

arch/arm/mach-omap2/cm-regbits-34xx.h

@@ -79,7 +79,7 @@
 
 /* CM_CLKSEL1_PLL_IVA2 */
 #define OMAP3430_IVA2_CLK_SRC_SHIFT			19
-#define OMAP3430_IVA2_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_IVA2_CLK_SRC_MASK			(0x7 << 19)
 #define OMAP3430_IVA2_DPLL_MULT_SHIFT			8
 #define OMAP3430_IVA2_DPLL_MULT_MASK			(0x7ff << 8)
 #define OMAP3430_IVA2_DPLL_DIV_SHIFT			0
@@ -124,7 +124,7 @@
 
 /* CM_CLKSEL1_PLL_MPU */
 #define OMAP3430_MPU_CLK_SRC_SHIFT			19
-#define OMAP3430_MPU_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_MPU_CLK_SRC_MASK			(0x7 << 19)
 #define OMAP3430_MPU_DPLL_MULT_SHIFT			8
 #define OMAP3430_MPU_DPLL_MULT_MASK			(0x7ff << 8)
 #define OMAP3430_MPU_DPLL_DIV_SHIFT			0

arch/arm/mach-omap2/cminst44xx.c

@@ -32,6 +32,7 @@
 #include "prcm44xx.h"
 #include "prm44xx.h"
 #include "prcm_mpu44xx.h"
+#include "prcm-common.h"
 
 /*
  * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield:
@@ -49,14 +50,21 @@
 #define CLKCTRL_IDLEST_INTERFACE_IDLE		0x2
 #define CLKCTRL_IDLEST_DISABLED			0x3
 
-static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
-	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
-	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
-	[OMAP4430_CM1_PARTITION]		= OMAP4430_CM1_BASE,
-	[OMAP4430_CM2_PARTITION]		= OMAP4430_CM2_BASE,
-	[OMAP4430_SCRM_PARTITION]		= 0,
-	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
-};
+static void __iomem *_cm_bases[OMAP4_MAX_PRCM_PARTITIONS];
+
+/**
+ * omap_cm_base_init - Populates the cm partitions
+ *
+ * Populates the base addresses of the _cm_bases
+ * array used for read/write of cm module registers.
+ */
+void omap_cm_base_init(void)
+{
+	_cm_bases[OMAP4430_PRM_PARTITION] = prm_base;
+	_cm_bases[OMAP4430_CM1_PARTITION] = cm_base;
+	_cm_bases[OMAP4430_CM2_PARTITION] = cm2_base;
+	_cm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
+}
 
 /* Private functions */
 
@@ -106,7 +114,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_cm_bases[part]);
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
+	return __raw_readl(_cm_bases[part] + inst + idx);
 }
 
 /* Write into a register in a CM instance */
@@ -115,7 +123,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_cm_bases[part]);
-	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
+	__raw_writel(val, _cm_bases[part] + inst + idx);
 }
 
 /* Read-modify-write a register in CM1. Caller must lock */

arch/arm/mach-omap2/common.c

@@ -166,6 +166,7 @@ static struct omap_globals omap4_globals = {
 	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
 	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
 	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
+	.prcm_mpu	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE),
 };
 
 void __init omap2_set_globals_443x(void)

arch/arm/mach-omap2/common.h

@@ -112,6 +112,7 @@ struct omap_globals {
 	void __iomem	*prm;            /* Power and Reset Management */
 	void __iomem	*cm;             /* Clock Management */
 	void __iomem	*cm2;
+	void __iomem	*prcm_mpu;
 };
 
 void omap2_set_globals_242x(void);

arch/arm/mach-omap2/devices.c

@@ -616,7 +616,11 @@ static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
 
 void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 {
-	char *name = "mmci-omap";
+	struct platform_device *pdev;
+	struct omap_hwmod *oh;
+	int id = 0;
+	char *oh_name = "msdi1";
+	char *dev_name = "mmci-omap";
 
 	if (!mmc_data[0]) {
 		pr_err("%s fails: Incomplete platform data\n", __func__);
@@ -624,8 +628,17 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 	}
 
 	omap242x_mmc_mux(mmc_data[0]);
-	omap_mmc_add(name, 0, OMAP2_MMC1_BASE, OMAP2420_MMC_SIZE,
-					INT_24XX_MMC_IRQ, mmc_data[0]);
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return;
+	}
+	pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
+				 sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
+	if (IS_ERR(pdev))
+		WARN(1, "Can'd build omap_device for %s:%s.\n",
+					dev_name, oh->name);
 }
 
 #endif

arch/arm/mach-omap2/dpll3xxx.c

@@ -142,7 +142,8 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 
 	ai = omap3_dpll_autoidle_read(clk);
 
-	omap3_dpll_deny_idle(clk);
+	if (ai)
+		omap3_dpll_deny_idle(clk);
 
 	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
 
@@ -186,8 +187,6 @@ static int _omap3_noncore_dpll_bypass(struct clk *clk)
 
 	if (ai)
 		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
 
 	return r;
 }
@@ -216,8 +215,6 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 
 	if (ai)
 		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
 
 	return 0;
 }
@@ -519,6 +516,9 @@ u32 omap3_dpll_autoidle_read(struct clk *clk)
 
 	dd = clk->dpll_data;
 
+	if (!dd->autoidle_reg)
+		return -EINVAL;
+
 	v = __raw_readl(dd->autoidle_reg);
 	v &= dd->autoidle_mask;
 	v >>= __ffs(dd->autoidle_mask);
@@ -545,6 +545,12 @@ void omap3_dpll_allow_idle(struct clk *clk)
 
 	dd = clk->dpll_data;
 
+	if (!dd->autoidle_reg) {
+		pr_debug("clock: DPLL %s: autoidle not supported\n",
+			clk->name);
+		return;
+	}
+
 	/*
 	 * REVISIT: CORE DPLL can optionally enter low-power bypass
 	 * by writing 0x5 instead of 0x1.  Add some mechanism to
@@ -554,6 +560,7 @@ void omap3_dpll_allow_idle(struct clk *clk)
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
 	__raw_writel(v, dd->autoidle_reg);
+
 }
 
 /**
@@ -572,6 +579,12 @@ void omap3_dpll_deny_idle(struct clk *clk)
 
 	dd = clk->dpll_data;
 
+	if (!dd->autoidle_reg) {
+		pr_debug("clock: DPLL %s: autoidle not supported\n",
+			clk->name);
+		return;
+	}
+
 	v = __raw_readl(dd->autoidle_reg);
 	v &= ~dd->autoidle_mask;
 	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);

arch/arm/mach-omap2/dsp.c

@@ -28,8 +28,6 @@
 
 #include <plat/dsp.h>
 
-extern phys_addr_t omap_dsp_get_mempool_base(void);
-
 static struct platform_device *omap_dsp_pdev;
 
 static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
@@ -47,6 +45,31 @@ static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
 	.dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits,
 };
 
+static phys_addr_t omap_dsp_phys_mempool_base;
+
+void __init omap_dsp_reserve_sdram_memblock(void)
+{
+	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
+	phys_addr_t paddr;
+
+	if (!size)
+		return;
+
+	paddr = arm_memblock_steal(size, SZ_1M);
+	if (!paddr) {
+		pr_err("%s: failed to reserve %llx bytes\n",
+				__func__, (unsigned long long)size);
+		return;
+	}
+
+	omap_dsp_phys_mempool_base = paddr;
+}
+
+static phys_addr_t omap_dsp_get_mempool_base(void)
+{
+	return omap_dsp_phys_mempool_base;
+}
+
 static int __init omap_dsp_init(void)
 {
 	struct platform_device *pdev;

arch/arm/mach-omap2/hdq1w.c

@@ -0,0 +1,72 @@
+/*
+ * IP block integration code for the HDQ1W/1-wire IP block
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * Based on the I2C reset code in arch/arm/mach-omap2/i2c.c by
+ *     Avinash.H.M <avinashhm@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <plat/omap_hwmod.h>
+#include <plat/hdq1w.h>
+
+#include "common.h"
+
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
+
+/**
+ * omap_hdq1w_reset - reset the OMAP HDQ1W module
+ * @oh: struct omap_hwmod *
+ *
+ * OCP soft reset the HDQ1W IP block.  Section 20.6.1.4 "HDQ1W/1-Wire
+ * Software Reset" of the OMAP34xx Technical Reference Manual Revision
+ * ZR (SWPU223R) does not include the rather important fact that, for
+ * the reset to succeed, the HDQ1W module's internal clock gate must be
+ * programmed to allow the clock to propagate to the rest of the
+ * module.  In this sense, it's rather similar to the I2C custom reset
+ * function.  Returns 0.
+ */
+int omap_hdq1w_reset(struct omap_hwmod *oh)
+{
+	u32 v;
+	int c = 0;
+
+	/* Write to the SOFTRESET bit */
+	omap_hwmod_softreset(oh);
+
+	/* Enable the module's internal clocks */
+	v = omap_hwmod_read(oh, HDQ_CTRL_STATUS_OFFSET);
+	v |= 1 << HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT;
+	omap_hwmod_write(v, oh, HDQ_CTRL_STATUS_OFFSET);
+
+	/* Poll on RESETDONE bit */
+	omap_test_timeout((omap_hwmod_read(oh,
+					   oh->class->sysc->syss_offs)
+			   & SYSS_RESETDONE_MASK),
+			  MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+	else
+		pr_debug("%s: %s: softreset in %d usec\n", __func__,
+			 oh->name, c);
+
+	return 0;
+}

arch/arm/mach-omap2/io.c

@@ -333,24 +333,6 @@ static void __init omap_hwmod_init_postsetup(void)
 #endif
 	omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
 
-	/*
-	 * Set the default postsetup state for unusual modules (like
-	 * MPU WDT).
-	 *
-	 * The postsetup_state is not actually used until
-	 * omap_hwmod_late_init(), so boards that desire full watchdog
-	 * coverage of kernel initialization can reprogram the
-	 * postsetup_state between the calls to
-	 * omap2_init_common_infra() and omap_sdrc_init().
-	 *
-	 * XXX ideally we could detect whether the MPU WDT was currently
-	 * enabled here and make this conditional
-	 */
-	postsetup_state = _HWMOD_STATE_DISABLED;
-	omap_hwmod_for_each_by_class("wd_timer",
-				     _set_hwmod_postsetup_state,
-				     &postsetup_state);
-
 	omap_pm_if_early_init();
 }
 

arch/arm/mach-omap2/msdi.c

@@ -0,0 +1,88 @@
+/*
+ * MSDI IP block reset
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * XXX What about pad muxing?
+ */
+
+#include <linux/kernel.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/mmc.h>
+
+#include "common.h"
+
+/*
+ * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
+ *     from the IP block's base address
+ */
+#define MSDI_CON_OFFSET				0x0c
+
+/* Register bitfields in the CON register */
+#define MSDI_CON_POW_MASK			BIT(11)
+#define MSDI_CON_CLKD_MASK			(0x3f << 0)
+#define MSDI_CON_CLKD_SHIFT			0
+
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
+
+/* MSDI_TARGET_RESET_CLKD: clock divisor to use throughout the reset */
+#define MSDI_TARGET_RESET_CLKD		0x3ff
+
+/**
+ * omap_msdi_reset - reset the MSDI IP block
+ * @oh: struct omap_hwmod *
+ *
+ * The MSDI IP block on OMAP2420 has to have both the POW and CLKD
+ * fields set inside its CON register for a reset to complete
+ * successfully.  This is not documented in the TRM.  For CLKD, we use
+ * the value that results in the lowest possible clock rate, to attempt
+ * to avoid disturbing any cards.
+ */
+int omap_msdi_reset(struct omap_hwmod *oh)
+{
+	u16 v = 0;
+	int c = 0;
+
+	/* Write to the SOFTRESET bit */
+	omap_hwmod_softreset(oh);
+
+	/* Enable the MSDI core and internal clock */
+	v |= MSDI_CON_POW_MASK;
+	v |= MSDI_TARGET_RESET_CLKD << MSDI_CON_CLKD_SHIFT;
+	omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
+
+	/* Poll on RESETDONE bit */
+	omap_test_timeout((omap_hwmod_read(oh, oh->class->sysc->syss_offs)
+			   & SYSS_RESETDONE_MASK),
+			  MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+	else
+		pr_debug("%s: %s: softreset in %d usec\n", __func__,
+			 oh->name, c);
+
+	/* Disable the MSDI internal clock */
+	v &= ~MSDI_CON_CLKD_MASK;
+	omap_hwmod_write(v, oh, MSDI_CON_OFFSET);
+
+	return 0;
+}

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -23,6 +23,7 @@
 #include <plat/dmtimer.h>
 #include <plat/l3_2xxx.h>
 #include <plat/l4_2xxx.h>
+#include <plat/mmc.h>
 
 #include "omap_hwmod_common_data.h"
 
@@ -239,6 +240,67 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = {
 	},
 };
 
+static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = {
+	.rev_offs	= 0x3c,
+	.sysc_offs	= 0x64,
+	.syss_offs	= 0x68,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
+	.name	= "msdi",
+	.sysc	= &omap2420_msdi_sysc,
+	.reset	= &omap_msdi_reset,
+};
+
+/* msdi1 */
+static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
+	{ .irq = 83 },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 61 }, /* OMAP24XX_DMA_MMC1_TX */
+	{ .name = "rx", .dma_req = 62 }, /* OMAP24XX_DMA_MMC1_RX */
+	{ .dma_req = -1 }
+};
+
+static struct omap_hwmod omap2420_msdi1_hwmod = {
+	.name		= "msdi1",
+	.class		= &omap2420_msdi_hwmod_class,
+	.mpu_irqs	= omap2420_msdi1_irqs,
+	.sdma_reqs	= omap2420_msdi1_sdma_reqs,
+	.main_clk	= "mmc_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2420_EN_MMC_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP2420_ST_MMC_SHIFT,
+		},
+	},
+	.flags		= HWMOD_16BIT_REG,
+};
+
+/* HDQ1W/1-wire */
+static struct omap_hwmod omap2420_hdq1w_hwmod = {
+	.name		= "hdq1w",
+	.mpu_irqs	= omap2_hdq1w_mpu_irqs,
+	.main_clk	= "hdq_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_HDQ_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT,
+		},
+	},
+	.class		= &omap2_hdq1w_class,
+};
+
 /*
  * interfaces
  */
@@ -428,6 +490,53 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_addr_space omap2420_msdi1_addrs[] = {
+	{
+		.pa_start	= 0x4809c000,
+		.pa_end		= 0x4809c000 + SZ_128 - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ }
+};
+
+/* l4_core -> msdi1 */
+static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2420_msdi1_hwmod,
+	.clk		= "mmc_ick",
+	.addr		= omap2420_msdi1_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> hdq1w interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2420_hdq1w_hwmod,
+	.clk		= "hdq_ick",
+	.addr		= omap2_hdq1w_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
+};
+
+
+/* l4_wkup -> 32ksync_counter */
+static struct omap_hwmod_addr_space omap2420_counter_32k_addrs[] = {
+	{
+		.pa_start	= 0x48004000,
+		.pa_end		= 0x4800401f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_counter_32k_hwmod,
+	.clk		= "sync_32k_ick",
+	.addr		= omap2420_counter_32k_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
 	&omap2xxx_l3_main__l4_core,
 	&omap2xxx_mpu__l3_main,
@@ -468,6 +577,9 @@ static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
 	&omap2420_l4_core__mailbox,
 	&omap2420_l4_core__mcbsp1,
 	&omap2420_l4_core__mcbsp2,
+	&omap2420_l4_core__msdi1,
+	&omap2420_l4_core__hdq1w,
+	&omap2420_l4_wkup__counter_32k,
 	NULL,
 };
 

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -528,6 +528,23 @@ static struct omap_hwmod omap2430_mmc2_hwmod = {
 	.class		= &omap2430_mmc_class,
 };
 
+/* HDQ1W/1-wire */
+static struct omap_hwmod omap2430_hdq1w_hwmod = {
+	.name		= "hdq1w",
+	.mpu_irqs	= omap2_hdq1w_mpu_irqs,
+	.main_clk	= "hdq_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_HDQ_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT,
+		},
+	},
+	.class		= &omap2_hdq1w_class,
+};
+
 /*
  * interfaces
  */
@@ -838,6 +855,34 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_core -> hdq1w */
+static struct omap_hwmod_ocp_if omap2430_l4_core__hdq1w = {
+	.master		= &omap2xxx_l4_core_hwmod,
+	.slave		= &omap2430_hdq1w_hwmod,
+	.clk		= "hdq_ick",
+	.addr		= omap2_hdq1w_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
+};
+
+/* l4_wkup -> 32ksync_counter */
+static struct omap_hwmod_addr_space omap2430_counter_32k_addrs[] = {
+	{
+		.pa_start	= 0x49020000,
+		.pa_end		= 0x4902001f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__counter_32k = {
+	.master		= &omap2xxx_l4_wkup_hwmod,
+	.slave		= &omap2xxx_counter_32k_hwmod,
+	.clk		= "sync_32k_ick",
+	.addr		= omap2430_counter_32k_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
 	&omap2xxx_l3_main__l4_core,
 	&omap2xxx_mpu__l3_main,
@@ -886,6 +931,8 @@ static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
 	&omap2430_l4_core__mcbsp3,
 	&omap2430_l4_core__mcbsp4,
 	&omap2430_l4_core__mcbsp5,
+	&omap2430_l4_core__hdq1w,
+	&omap2430_l4_wkup__counter_32k,
 	NULL,
 };
 

arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c

@@ -171,3 +171,12 @@ struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = {
 	},
 	{ }
 };
+
+struct omap_hwmod_addr_space omap2_hdq1w_addr_space[] = {
+	{
+		.pa_start       = 0x480b2000,
+		.pa_end         = 0x480b2fff,
+		.flags          = ADDR_TYPE_RT,
+	},
+	{ }
+};

arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c

@@ -2,6 +2,7 @@
  * omap_hwmod_2xxx_3xxx_ipblock_data.c - common IP block data for OMAP2/3
  *
  * Copyright (C) 2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
@@ -12,6 +13,7 @@
 #include <plat/serial.h>
 #include <plat/dma.h>
 #include <plat/common.h>
+#include <plat/hdq1w.h>
 
 #include <mach/irqs.h>
 
@@ -302,3 +304,23 @@ struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = {
 	{ .irq = -1 }
 };
 
+struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x14,
+	.syss_offs	= 0x18,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+struct omap_hwmod_class omap2_hdq1w_class = {
+	.name	= "hdq1w",
+	.sysc	= &omap2_hdq1w_sysc,
+	.reset	= &omap_hdq1w_reset,
+};
+
+struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[] = {
+	{ .irq = 58, },
+	{ .irq = -1 }
+};
+

arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

@@ -89,7 +89,8 @@ static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = {
 struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
 	.sysc		= &omap2xxx_wd_timer_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable
+	.pre_shutdown	= &omap2_wd_timer_disable,
+	.reset		= &omap2_wd_timer_reset,
 };
 
 /*
@@ -732,3 +733,23 @@ struct omap_hwmod omap2xxx_mcspi2_hwmod = {
 	.class		= &omap2xxx_mcspi_class,
 	.dev_attr	= &omap_mcspi2_dev_attr,
 };
+
+
+static struct omap_hwmod_class omap2xxx_counter_hwmod_class = {
+	.name	= "counter",
+};
+
+struct omap_hwmod omap2xxx_counter_32k_hwmod = {
+	.name		= "counter_32k",
+	.main_clk	= "func_32k_ck",
+	.prcm		= {
+		.omap2	= {
+			.module_offs = WKUP_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_ST_32KSYNC_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_32KSYNC_SHIFT,
+		},
+	},
+	.class		= &omap2xxx_counter_hwmod_class,
+};

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -418,7 +418,8 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
 static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
 	.sysc		= &omap3xxx_wd_timer_sysc,
-	.pre_shutdown	= &omap2_wd_timer_disable
+	.pre_shutdown	= &omap2_wd_timer_disable,
+	.reset		= &omap2_wd_timer_reset,
 };
 
 static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
@@ -1075,7 +1076,7 @@ static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
 
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
-	{ .name = "irq", .irq = 16 },
+	{ .name = "common", .irq = 16 },
 	{ .name = "tx", .irq = 59 },
 	{ .name = "rx", .irq = 60 },
 	{ .irq = -1 }
@@ -1100,7 +1101,7 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
 
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
-	{ .name = "irq", .irq = 17 },
+	{ .name = "common", .irq = 17 },
 	{ .name = "tx", .irq = 62 },
 	{ .name = "rx", .irq = 63 },
 	{ .irq = -1 }
@@ -1130,7 +1131,7 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
 
 /* mcbsp3 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
-	{ .name = "irq", .irq = 22 },
+	{ .name = "common", .irq = 22 },
 	{ .name = "tx", .irq = 89 },
 	{ .name = "rx", .irq = 90 },
 	{ .irq = -1 }
@@ -1160,7 +1161,7 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
 
 /* mcbsp4 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
-	{ .name = "irq", .irq = 23 },
+	{ .name = "common", .irq = 23 },
 	{ .name = "tx", .irq = 54 },
 	{ .name = "rx", .irq = 55 },
 	{ .irq = -1 }
@@ -1191,7 +1192,7 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
 
 /* mcbsp5 */
 static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
-	{ .name = "irq", .irq = 27 },
+	{ .name = "common", .irq = 27 },
 	{ .name = "tx", .irq = 81 },
 	{ .name = "rx", .irq = 82 },
 	{ .irq = -1 }
@@ -1980,6 +1981,56 @@ static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
 	},
 };
 
+static struct omap_hwmod omap3xxx_hdq1w_hwmod = {
+	.name		= "hdq1w",
+	.mpu_irqs	= omap2_hdq1w_mpu_irqs,
+	.main_clk	= "hdq_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_HDQ_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_HDQ_SHIFT,
+		},
+	},
+	.class		= &omap2_hdq1w_class,
+};
+
+/*
+ * '32K sync counter' class
+ * 32-bit ordinary counter, clocked by the falling edge of the 32 khz clock
+ */
+static struct omap_hwmod_class_sysconfig omap3xxx_counter_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0004,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_counter_hwmod_class = {
+	.name	= "counter",
+	.sysc	= &omap3xxx_counter_sysc,
+};
+
+static struct omap_hwmod omap3xxx_counter_32k_hwmod = {
+	.name		= "counter_32k",
+	.class		= &omap3xxx_counter_hwmod_class,
+	.clkdm_name	= "wkup_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
+	.main_clk	= "wkup_32k_fck",
+	.prcm		= {
+		.omap2	= {
+			.module_offs = WKUP_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_ST_32KSYNC_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_32KSYNC_SHIFT,
+		},
+	},
+};
+
 /*
  * interfaces
  */
@@ -3059,6 +3110,34 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l4_core -> hdq1w interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__hdq1w = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_hdq1w_hwmod,
+	.clk		= "hdq_ick",
+	.addr		= omap2_hdq1w_addr_space,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.flags		= OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
+};
+
+/* l4_wkup -> 32ksync_counter */
+static struct omap_hwmod_addr_space omap3xxx_counter_32k_addrs[] = {
+	{
+		.pa_start	= 0x48320000,
+		.pa_end		= 0x4832001f,
+		.flags		= ADDR_TYPE_RT
+	},
+	{ }
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__counter_32k = {
+	.master		= &omap3xxx_l4_wkup_hwmod,
+	.slave		= &omap3xxx_counter_32k_hwmod,
+	.clk		= "omap_32ksync_ick",
+	.addr		= omap3xxx_counter_32k_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l3_main__l4_core,
 	&omap3xxx_l3_main__l4_per,
@@ -3103,6 +3182,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
 	&omap34xx_l4_core__mcspi2,
 	&omap34xx_l4_core__mcspi3,
 	&omap34xx_l4_core__mcspi4,
+	&omap3xxx_l4_wkup__counter_32k,
 	NULL,
 };
 
@@ -3151,6 +3231,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 	&omap34xx_l4_core__sr1,
 	&omap34xx_l4_core__sr2,
 	&omap3xxx_l4_core__mailbox,
+	&omap3xxx_l4_core__hdq1w,
 	NULL
 };
 
@@ -3170,6 +3251,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__usb_tll_hs,
 	&omap3xxx_l4_core__es3plus_mmc1,
 	&omap3xxx_l4_core__es3plus_mmc2,
+	&omap3xxx_l4_core__hdq1w,
 	NULL
 };
 

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -1487,7 +1487,8 @@ static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
 };
 
 static struct omap_i2c_dev_attr i2c_dev_attr = {
-	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE,
+	.flags	= OMAP_I2C_FLAG_BUS_SHIFT_NONE |
+			OMAP_I2C_FLAG_RESET_REGS_POSTIDLE,
 };
 
 /* i2c1 */
@@ -1911,7 +1912,7 @@ static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = {
 
 /* mcbsp1 */
 static struct omap_hwmod_irq_info omap44xx_mcbsp1_irqs[] = {
-	{ .irq = 17 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "common", .irq = 17 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
@@ -1946,7 +1947,7 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = {
 
 /* mcbsp2 */
 static struct omap_hwmod_irq_info omap44xx_mcbsp2_irqs[] = {
-	{ .irq = 22 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "common", .irq = 22 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
@@ -1981,7 +1982,7 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = {
 
 /* mcbsp3 */
 static struct omap_hwmod_irq_info omap44xx_mcbsp3_irqs[] = {
-	{ .irq = 23 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "common", .irq = 23 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
@@ -2016,7 +2017,7 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = {
 
 /* mcbsp4 */
 static struct omap_hwmod_irq_info omap44xx_mcbsp4_irqs[] = {
-	{ .irq = 16 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "common", .irq = 16 + OMAP44XX_IRQ_GIC_START },
 	{ .irq = -1 }
 };
 
@@ -3534,6 +3535,7 @@ static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
 	.sysc		= &omap44xx_wd_timer_sysc,
 	.pre_shutdown	= &omap2_wd_timer_disable,
+	.reset		= &omap2_wd_timer_reset,
 };
 
 /* wd_timer2 */

arch/arm/mach-omap2/omap_hwmod_common_data.h

@@ -38,6 +38,7 @@ extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[];
 extern struct omap_hwmod_addr_space omap2_dma_system_addrs[];
 extern struct omap_hwmod_addr_space omap2_mailbox_addrs[];
 extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[];
+extern struct omap_hwmod_addr_space omap2_hdq1w_addr_space[];
 
 /* Common IP block data across OMAP2xxx */
 extern struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[];
@@ -74,6 +75,7 @@ extern struct omap_hwmod omap2xxx_gpio3_hwmod;
 extern struct omap_hwmod omap2xxx_gpio4_hwmod;
 extern struct omap_hwmod omap2xxx_mcspi1_hwmod;
 extern struct omap_hwmod omap2xxx_mcspi2_hwmod;
+extern struct omap_hwmod omap2xxx_counter_32k_hwmod;
 
 /* Common interface data across OMAP2xxx */
 extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core;
@@ -141,6 +143,7 @@ extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
 extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
 extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];
 extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[];
+extern struct omap_hwmod_irq_info omap2_hdq1w_mpu_irqs[];
 
 /* OMAP hwmod classes - forward declarations */
 extern struct omap_hwmod_class l3_hwmod_class;
@@ -152,6 +155,8 @@ extern struct omap_hwmod_class omap2_dss_hwmod_class;
 extern struct omap_hwmod_class omap2_dispc_hwmod_class;
 extern struct omap_hwmod_class omap2_rfbi_hwmod_class;
 extern struct omap_hwmod_class omap2_venc_hwmod_class;
+extern struct omap_hwmod_class_sysconfig omap2_hdq1w_sysc;
+extern struct omap_hwmod_class omap2_hdq1w_class;
 
 extern struct omap_hwmod_class omap2xxx_timer_hwmod_class;
 extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class;

arch/arm/mach-omap2/powerdomain.c

@@ -981,16 +981,6 @@ int pwrdm_state_switch(struct powerdomain *pwrdm)
 	return ret;
 }
 
-int pwrdm_clkdm_state_switch(struct clockdomain *clkdm)
-{
-	if (clkdm != NULL && clkdm->pwrdm.ptr != NULL) {
-		pwrdm_wait_transition(clkdm->pwrdm.ptr);
-		return pwrdm_state_switch(clkdm->pwrdm.ptr);
-	}
-
-	return -EINVAL;
-}
-
 int pwrdm_pre_transition(void)
 {
 	pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);

arch/arm/mach-omap2/powerdomain.h

@@ -213,7 +213,6 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
 int pwrdm_wait_transition(struct powerdomain *pwrdm);
 
 int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
 int pwrdm_pre_transition(void);
 int pwrdm_post_transition(void);
 int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);

arch/arm/mach-omap2/prcm-common.h

@@ -177,6 +177,8 @@
 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
 #define OMAP24XX_ST_GPIOS_SHIFT				2
 #define OMAP24XX_ST_GPIOS_MASK				(1 << 2)
+#define OMAP24XX_ST_32KSYNC_SHIFT			1
+#define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
 #define OMAP24XX_ST_GPT1_SHIFT				0
 #define OMAP24XX_ST_GPT1_MASK				(1 << 0)
 
@@ -307,6 +309,8 @@
 #define OMAP3430_ST_SR1_MASK				(1 << 6)
 #define OMAP3430_ST_GPIO1_SHIFT				3
 #define OMAP3430_ST_GPIO1_MASK				(1 << 3)
+#define OMAP3430_ST_32KSYNC_SHIFT			2
+#define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
 #define OMAP3430_ST_GPT12_SHIFT				1
 #define OMAP3430_ST_GPT12_MASK				(1 << 1)
 #define OMAP3430_ST_GPT1_SHIFT				0
@@ -410,6 +414,19 @@
 extern void __iomem *prm_base;
 extern void __iomem *cm_base;
 extern void __iomem *cm2_base;
+extern void __iomem *prcm_mpu_base;
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_OMAP5)
+extern void omap_prm_base_init(void);
+extern void omap_cm_base_init(void);
+#else
+static inline void omap_prm_base_init(void)
+{
+}
+static inline void omap_cm_base_init(void)
+{
+}
+#endif
 
 /**
  * struct omap_prcm_irq - describes a PRCM interrupt bit

arch/arm/mach-omap2/prcm.c

@@ -42,6 +42,7 @@
 void __iomem *prm_base;
 void __iomem *cm_base;
 void __iomem *cm2_base;
+void __iomem *prcm_mpu_base;
 
 #define MAX_MODULE_ENABLE_WAIT		100000
 
@@ -155,4 +156,11 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 		cm_base = omap2_globals->cm;
 	if (omap2_globals->cm2)
 		cm2_base = omap2_globals->cm2;
+	if (omap2_globals->prcm_mpu)
+		prcm_mpu_base = omap2_globals->prcm_mpu;
+
+	if (cpu_is_omap44xx()) {
+		omap_prm_base_init();
+		omap_cm_base_init();
+	}
 }

arch/arm/mach-omap2/prminst44xx.c

@@ -18,20 +18,26 @@
 
 #include "iomap.h"
 #include "common.h"
+#include "prcm-common.h"
 #include "prm44xx.h"
 #include "prminst44xx.h"
 #include "prm-regbits-44xx.h"
 #include "prcm44xx.h"
 #include "prcm_mpu44xx.h"
 
-static u32 _prm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
-	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
-	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
-	[OMAP4430_CM1_PARTITION]		= 0,
-	[OMAP4430_CM2_PARTITION]		= 0,
-	[OMAP4430_SCRM_PARTITION]		= 0,
-	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
-};
+static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
+
+/**
+ * omap_prm_base_init - Populates the prm partitions
+ *
+ * Populates the base addresses of the _prm_bases
+ * array used for read/write of prm module registers.
+ */
+void omap_prm_base_init(void)
+{
+	_prm_bases[OMAP4430_PRM_PARTITION] = prm_base;
+	_prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
+}
 
 /* Read a register in a PRM instance */
 u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
@@ -39,8 +45,7 @@ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_prm_bases[part]);
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst +
-					       idx));
+	return __raw_readl(_prm_bases[part] + inst + idx);
 }
 
 /* Write into a register in a PRM instance */
@@ -49,7 +54,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
 	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
 	       part == OMAP4430_INVALID_PRCM_PARTITION ||
 	       !_prm_bases[part]);
-	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst + idx));
+	__raw_writel(val, _prm_bases[part] + inst + idx);
 }
 
 /* Read-modify-write a register in PRM. Caller must lock */

arch/arm/mach-omap2/timer.c

@@ -178,13 +178,6 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	if (IS_ERR(timer->fclk))
 		return -ENODEV;
 
-	sprintf(name, "gpt%d_ick", gptimer_id);
-	timer->iclk = clk_get(NULL, name);
-	if (IS_ERR(timer->iclk)) {
-		clk_put(timer->fclk);
-		return -ENODEV;
-	}
-
 	omap_hwmod_enable(oh);
 
 	sys_timer_reserved |= (1 << (gptimer_id - 1));

arch/arm/mach-omap2/wd_timer.c

@@ -14,6 +14,7 @@
 #include <plat/omap_hwmod.h>
 
 #include "wd_timer.h"
+#include "common.h"
 
 /*
  * In order to avoid any assumptions from bootloader regarding WDT
@@ -25,6 +26,8 @@
 #define OMAP_WDT_WPS		0x34
 #define OMAP_WDT_SPR		0x48
 
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
 
 int omap2_wd_timer_disable(struct omap_hwmod *oh)
 {
@@ -54,3 +57,45 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh)
 	return 0;
 }
 
+/**
+ * omap2_wdtimer_reset - reset and disable the WDTIMER IP block
+ * @oh: struct omap_hwmod *
+ *
+ * After the WDTIMER IP blocks are reset on OMAP2/3, we must also take
+ * care to execute the special watchdog disable sequence.  This is
+ * because the watchdog is re-armed upon OCP softreset.  (On OMAP4,
+ * this behavior was apparently changed and the watchdog is no longer
+ * re-armed after an OCP soft-reset.)  Returns -ETIMEDOUT if the reset
+ * did not complete, or 0 upon success.
+ *
+ * XXX Most of this code should be moved to the omap_hwmod.c layer
+ * during a normal merge window.  omap_hwmod_softreset() should be
+ * renamed to omap_hwmod_set_ocp_softreset(), and omap_hwmod_softreset()
+ * should call the hwmod _ocp_softreset() code.
+ */
+int omap2_wd_timer_reset(struct omap_hwmod *oh)
+{
+	int c = 0;
+
+	/* Write to the SOFTRESET bit */
+	omap_hwmod_softreset(oh);
+
+	/* Poll on RESETDONE bit */
+	omap_test_timeout((omap_hwmod_read(oh,
+					   oh->class->sysc->syss_offs)
+			   & SYSS_RESETDONE_MASK),
+			  MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("%s: %s: softreset failed (waited %d usec)\n",
+			   __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
+	else
+		pr_debug("%s: %s: softreset in %d usec\n", __func__,
+			 oh->name, c);
+
+	return (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT :
+		omap2_wd_timer_disable(oh);
+}

arch/arm/mach-omap2/wd_timer.h

@@ -13,5 +13,6 @@
 #include <plat/omap_hwmod.h>
 
 extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
+extern int omap2_wd_timer_reset(struct omap_hwmod *oh);
 
 #endif

arch/arm/plat-omap/devices.c

@@ -28,54 +28,6 @@
 #include <plat/menelaus.h>
 #include <plat/omap44xx.h>
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-
-#define OMAP_MMC_NR_RES		2
-
-/*
- * Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
- */
-int __init omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data)
-{
-	struct platform_device *pdev;
-	struct resource res[OMAP_MMC_NR_RES];
-	int ret;
-
-	pdev = platform_device_alloc(name, id);
-	if (!pdev)
-		return -ENOMEM;
-
-	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
-	res[0].start = base;
-	res[0].end = base + size - 1;
-	res[0].flags = IORESOURCE_MEM;
-	res[1].start = res[1].end = irq;
-	res[1].flags = IORESOURCE_IRQ;
-
-	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
-	if (ret == 0)
-		ret = platform_device_add_data(pdev, data, sizeof(*data));
-	if (ret)
-		goto fail;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto fail;
-
-	/* return device handle to board setup code */
-	data->dev = &pdev->dev;
-	return 0;
-
-fail:
-	platform_device_put(pdev);
-	return ret;
-}
-
-#endif
-
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
@@ -109,79 +61,6 @@ static void omap_init_rng(void)
 static inline void omap_init_rng(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-/* Numbering for the SPI-capable controllers when used for SPI:
- * spi		= 1
- * uwire	= 2
- * mmc1..2	= 3..4
- * mcbsp1..3	= 5..7
- */
-
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
-
-#define	OMAP_UWIRE_BASE		0xfffb3000
-
-static struct resource uwire_resources[] = {
-	{
-		.start		= OMAP_UWIRE_BASE,
-		.end		= OMAP_UWIRE_BASE + 0x20,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_uwire_device = {
-	.name	   = "omap_uwire",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(uwire_resources),
-	.resource	= uwire_resources,
-};
-
-static void omap_init_uwire(void)
-{
-	/* FIXME define and use a boot tag; not all boards will be hooking
-	 * up devices to the microwire controller, and multi-board configs
-	 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
-	 */
-
-	/* board-specific code must configure chipselects (only a few
-	 * are normally used) and SCLK/SDI/SDO (each has two choices).
-	 */
-	(void) platform_device_register(&omap_uwire_device);
-}
-#else
-static inline void omap_init_uwire(void) {}
-#endif
-
-#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
-
-static phys_addr_t omap_dsp_phys_mempool_base;
-
-void __init omap_dsp_reserve_sdram_memblock(void)
-{
-	phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
-	phys_addr_t paddr;
-
-	if (!size)
-		return;
-
-	paddr = arm_memblock_steal(size, SZ_1M);
-	if (!paddr) {
-		pr_err("%s: failed to reserve %llx bytes\n",
-				__func__, (unsigned long long)size);
-		return;
-	}
-
-	omap_dsp_phys_mempool_base = paddr;
-}
-
-phys_addr_t omap_dsp_get_mempool_base(void)
-{
-	return omap_dsp_phys_mempool_base;
-}
-EXPORT_SYMBOL(omap_dsp_get_mempool_base);
-#endif
-
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -208,7 +87,6 @@ static int __init omap_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_rng();
-	omap_init_uwire();
 	return 0;
 }
 arch_initcall(omap_init_devices);

arch/arm/plat-omap/include/plat/clkdev_omap.h

@@ -34,8 +34,7 @@ struct omap_clk {
 #define CK_243X		(1 << 5)	/* 243x, 253x */
 #define CK_3430ES1	(1 << 6)	/* 34xxES1 only */
 #define CK_3430ES2PLUS	(1 << 7)	/* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_3505		(1 << 8)
-#define CK_3517		(1 << 9)
+#define CK_AM35XX	(1 << 9)	/* Sitara AM35xx */
 #define CK_36XX		(1 << 10)	/* 36xx/37xx-specific clocks */
 #define CK_443X		(1 << 11)
 #define CK_TI816X	(1 << 12)
@@ -44,7 +43,6 @@ struct omap_clk {
 
 
 #define CK_34XX		(CK_3430ES1 | CK_3430ES2PLUS)
-#define CK_AM35XX	(CK_3505 | CK_3517)	/* all Sitara AM35xx */
 #define CK_3XXX		(CK_34XX | CK_AM35XX | CK_36XX)
 
 

arch/arm/plat-omap/include/plat/dmtimer.h

@@ -258,7 +258,7 @@ struct omap_dm_timer {
 	unsigned long phys_base;
 	int id;
 	int irq;
-	struct clk *iclk, *fclk;
+	struct clk *fclk;
 
 	void __iomem	*io_base;
 	void __iomem	*sys_stat;	/* TISTAT timer status */

arch/arm/plat-omap/include/plat/hdq1w.h

@@ -0,0 +1,36 @@
+/*
+ * Shared macros and function prototypes for the HDQ1W/1-wire IP block
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+#ifndef ARCH_ARM_MACH_OMAP2_HDQ1W_H
+#define ARCH_ARM_MACH_OMAP2_HDQ1W_H
+
+#include <plat/omap_hwmod.h>
+
+/*
+ * XXX A future cleanup patch should modify
+ * drivers/w1/masters/omap_hdq.c to use these macros
+ */
+#define HDQ_CTRL_STATUS_OFFSET			0x0c
+#define HDQ_CTRL_STATUS_CLOCKENABLE_SHIFT	5
+
+
+extern int omap_hdq1w_reset(struct omap_hwmod *oh);
+
+#endif

arch/arm/plat-omap/include/plat/mmc.h

@@ -16,6 +16,7 @@
 #include <linux/mmc/host.h>
 
 #include <plat/board.h>
+#include <plat/omap_hwmod.h>
 
 #define OMAP15XX_NR_MMC		1
 #define OMAP16XX_NR_MMC		2
@@ -176,9 +177,6 @@ extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-int omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data);
 #else
 static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers)
@@ -187,12 +185,9 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 {
 }
-static inline int omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data)
-{
-	return 0;
-}
 
 #endif
+
+extern int omap_msdi_reset(struct omap_hwmod *oh);
+
 #endif