V4L/DVB: The first two parameters of soc_camera_limit_side() are usually pointers to struct v4l2_rect elements. They are signed, so adjust the prototype accordingly

This will remove the following sparse warning (see "make C=1"):

 * incorrect type in argument 1 (different signedness)
       expected unsigned int *start
       got signed int *<noident>

as well as a couple more signedness mismatches.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/mt9v022.c

@@ -325,7 +325,7 @@ static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	if (ret < 0)
 		return ret;
 
-	dev_dbg(&client->dev, "Frame %ux%u pixel\n", rect.width, rect.height);
+	dev_dbg(&client->dev, "Frame %dx%d pixel\n", rect.width, rect.height);
 
 	mt9v022->rect = rect;
 

drivers/media/video/mx3_camera.c

@@ -796,7 +796,7 @@ static int acquire_dma_channel(struct mx3_camera_dev *mx3_cam)
  * FIXME: learn to use stride != width, then we can keep stride properly aligned
  * and support arbitrary (even) widths.
  */
-static inline void stride_align(__s32 *width)
+static inline void stride_align(__u32 *width)
 {
 	if (((*width + 7) &  ~7) < 4096)
 		*width = (*width + 7) &  ~7;
@@ -844,7 +844,7 @@ static int mx3_camera_set_crop(struct soc_camera_device *icd,
 		 * So far only direct camera-to-memory is supported
 		 */
 		if (channel_change_requested(icd, rect)) {
-			int ret = acquire_dma_channel(mx3_cam);
+			ret = acquire_dma_channel(mx3_cam);
 			if (ret < 0)
 				return ret;
 		}

drivers/media/video/rj54n1cb0c.c

@@ -555,15 +555,15 @@ static int rj54n1_commit(struct i2c_client *client)
 	return ret;
 }
 
-static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
-			       u32 *out_w, u32 *out_h);
+static int rj54n1_sensor_scale(struct v4l2_subdev *sd, s32 *in_w, s32 *in_h,
+			       s32 *out_w, s32 *out_h);
 
 static int rj54n1_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	struct i2c_client *client = sd->priv;
 	struct rj54n1 *rj54n1 = to_rj54n1(client);
 	struct v4l2_rect *rect = &a->c;
-	unsigned int dummy = 0, output_w, output_h,
+	int dummy = 0, output_w, output_h,
 		input_w = rect->width, input_h = rect->height;
 	int ret;
 
@@ -577,7 +577,7 @@ static int rj54n1_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 	output_w = (input_w * 1024 + rj54n1->resize / 2) / rj54n1->resize;
 	output_h = (input_h * 1024 + rj54n1->resize / 2) / rj54n1->resize;
 
-	dev_dbg(&client->dev, "Scaling for %ux%u : %u = %ux%u\n",
+	dev_dbg(&client->dev, "Scaling for %dx%d : %u = %dx%d\n",
 		input_w, input_h, rj54n1->resize, output_w, output_h);
 
 	ret = rj54n1_sensor_scale(sd, &input_w, &input_h, &output_w, &output_h);
@@ -638,8 +638,8 @@ static int rj54n1_g_fmt(struct v4l2_subdev *sd,
  * the output one, updates the window sizes and returns an error or the resize
  * coefficient on success. Note: we only use the "Fixed Scaling" on this camera.
  */
-static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
-			       u32 *out_w, u32 *out_h)
+static int rj54n1_sensor_scale(struct v4l2_subdev *sd, s32 *in_w, s32 *in_h,
+			       s32 *out_w, s32 *out_h)
 {
 	struct i2c_client *client = sd->priv;
 	struct rj54n1 *rj54n1 = to_rj54n1(client);
@@ -749,7 +749,7 @@ static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
 	 * improve the image quality or stability for larger frames (see comment
 	 * above), but I didn't check the framerate.
 	 */
-	skip = min(resize / 1024, (unsigned)15);
+	skip = min(resize / 1024, 15U);
 
 	inc_sel = 1 << skip;
 
@@ -819,7 +819,7 @@ static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
 	*out_w = output_w;
 	*out_h = output_h;
 
-	dev_dbg(&client->dev, "Scaled for %ux%u : %u = %ux%u, skip %u\n",
+	dev_dbg(&client->dev, "Scaled for %dx%d : %u = %ux%u, skip %u\n",
 		*in_w, *in_h, resize, output_w, output_h, skip);
 
 	return resize;
@@ -1017,7 +1017,7 @@ static int rj54n1_s_fmt(struct v4l2_subdev *sd,
 	struct i2c_client *client = sd->priv;
 	struct rj54n1 *rj54n1 = to_rj54n1(client);
 	const struct rj54n1_datafmt *fmt;
-	unsigned int output_w, output_h, max_w, max_h,
+	int output_w, output_h, max_w, max_h,
 		input_w = rj54n1->rect.width, input_h = rj54n1->rect.height;
 	int ret;
 

drivers/media/video/sh_mobile_ceu_camera.c

@@ -1041,13 +1041,13 @@ static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
 	 */
 	if (!memcmp(rect, cam_rect, sizeof(*rect))) {
 		/* Even if camera S_CROP failed, but camera rectangle matches */
-		dev_dbg(dev, "Camera S_CROP successful for %ux%u@%u:%u\n",
+		dev_dbg(dev, "Camera S_CROP successful for %dx%d@%d:%d\n",
 			rect->width, rect->height, rect->left, rect->top);
 		return 0;
 	}
 
 	/* Try to fix cropping, that camera hasn't managed to set */
-	dev_geo(dev, "Fix camera S_CROP for %ux%u@%u:%u to %ux%u@%u:%u\n",
+	dev_geo(dev, "Fix camera S_CROP for %dx%d@%d:%d to %dx%d@%d:%d\n",
 		cam_rect->width, cam_rect->height,
 		cam_rect->left, cam_rect->top,
 		rect->width, rect->height, rect->left, rect->top);
@@ -1103,7 +1103,7 @@ static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
 
 		v4l2_subdev_call(sd, video, s_crop, cam_crop);
 		ret = client_g_rect(sd, cam_rect);
-		dev_geo(dev, "Camera S_CROP %d for %ux%u@%u:%u\n", ret,
+		dev_geo(dev, "Camera S_CROP %d for %dx%d@%d:%d\n", ret,
 			cam_rect->width, cam_rect->height,
 			cam_rect->left, cam_rect->top);
 	}
@@ -1117,7 +1117,7 @@ static int client_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *crop,
 		*cam_rect = cap.bounds;
 		v4l2_subdev_call(sd, video, s_crop, cam_crop);
 		ret = client_g_rect(sd, cam_rect);
-		dev_geo(dev, "Camera S_CROP %d for max %ux%u@%u:%u\n", ret,
+		dev_geo(dev, "Camera S_CROP %d for max %dx%d@%d:%d\n", ret,
 			cam_rect->width, cam_rect->height,
 			cam_rect->left, cam_rect->top);
 	}

include/media/soc_camera.h

@@ -266,8 +266,8 @@ static inline unsigned long soc_camera_bus_param_compatible(
 		common_flags;
 }
 
-static inline void soc_camera_limit_side(unsigned int *start,
-		unsigned int *length, unsigned int start_min,
+static inline void soc_camera_limit_side(int *start, int *length,
+		unsigned int start_min,
 		unsigned int length_min, unsigned int length_max)
 {
 	if (*length < length_min)