Merge branch 'linus' into tracing/ftrace

Documentation/DocBook/Makefile

@@ -136,7 +136,7 @@ quiet_cmd_db2ps = PS      $@
 %.ps : %.xml
 	$(call cmd,db2ps)
 
-quiet_cmd_db2pdf = PDF      $@
+quiet_cmd_db2pdf = PDF     $@
       cmd_db2pdf = $(subst TYPE,pdf, $($(PDF_METHOD)template))
 %.pdf : %.xml
 	$(call cmd,db2pdf)
@@ -148,7 +148,7 @@ build_main_index = rm -rf $(main_idx) && \
 		   echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
 		   cat $(HTML) >> $(main_idx)
 
-quiet_cmd_db2html = HTML   $@
+quiet_cmd_db2html = HTML    $@
       cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
 		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
         $(patsubst %.html,%,$(notdir $@))</a><p>' > $@

Documentation/DocBook/deviceiobook.tmpl

@@ -24,7 +24,7 @@
     <surname>Cox</surname>
     <affiliation>
      <address>
-      <email>alan@redhat.com</email>
+      <email>alan@lxorguk.ukuu.org.uk</email>
      </address>
     </affiliation>
    </author>

Documentation/DocBook/mcabook.tmpl

@@ -12,7 +12,7 @@
     <surname>Cox</surname>
     <affiliation>
      <address>
-      <email>alan@redhat.com</email>
+      <email>alan@lxorguk.ukuu.org.uk</email>
      </address>
     </affiliation>
    </author>

Documentation/DocBook/wanbook.tmpl

@@ -12,7 +12,7 @@
     <surname>Cox</surname>
     <affiliation>
      <address>
-      <email>alan@redhat.com</email>
+      <email>alan@lxorguk.ukuu.org.uk</email>
      </address>
     </affiliation>
    </author>

Documentation/DocBook/z8530book.tmpl

@@ -12,7 +12,7 @@
     <surname>Cox</surname>
     <affiliation>
      <address>
-      <email>alan@redhat.com</email>
+      <email>alan@lxorguk.ukuu.org.uk</email>
      </address>
     </affiliation>
    </author>

Documentation/ManagementStyle

@@ -17,7 +17,7 @@ companies.  If you sign purchase orders or you have any clue about the
 budget of your group, you're almost certainly not a kernel manager. 
 These suggestions may or may not apply to you. 
 
-First off, I'd suggest buying "Seven Habits of Highly Successful
+First off, I'd suggest buying "Seven Habits of Highly Effective
 People", and NOT read it.  Burn it, it's a great symbolic gesture. 
 
 (*) This document does so not so much by answering the question, but by

Documentation/accounting/.gitignore

@@ -0,0 +1 @@
+getdelays

Documentation/auxdisplay/.gitignore

@@ -0,0 +1 @@
+cfag12864b-example

Documentation/connector/.gitignore

@@ -0,0 +1 @@
+ucon

Documentation/filesystems/Locking

@@ -161,8 +161,12 @@ prototypes:
 	int (*set_page_dirty)(struct page *page);
 	int (*readpages)(struct file *filp, struct address_space *mapping,
 			struct list_head *pages, unsigned nr_pages);
-	int (*prepare_write)(struct file *, struct page *, unsigned, unsigned);
-	int (*commit_write)(struct file *, struct page *, unsigned, unsigned);
+	int (*write_begin)(struct file *, struct address_space *mapping,
+				loff_t pos, unsigned len, unsigned flags,
+				struct page **pagep, void **fsdata);
+	int (*write_end)(struct file *, struct address_space *mapping,
+				loff_t pos, unsigned len, unsigned copied,
+				struct page *page, void *fsdata);
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
@@ -180,8 +184,6 @@ sync_page:		no	maybe
 writepages:		no
 set_page_dirty		no	no
 readpages:		no
-prepare_write:		no	yes			yes
-commit_write:		no	yes			yes
 write_begin:		no	locks the page		yes
 write_end:		no	yes, unlocks		yes
 perform_write:		no	n/a			yes
@@ -191,7 +193,7 @@ releasepage:		no	yes
 direct_IO:		no
 launder_page:		no	yes
 
-	->prepare_write(), ->commit_write(), ->sync_page() and ->readpage()
+	->write_begin(), ->write_end(), ->sync_page() and ->readpage()
 may be called from the request handler (/dev/loop).
 
 	->readpage() unlocks the page, either synchronously or via I/O

Documentation/filesystems/vfs.txt

@@ -492,7 +492,7 @@ written-back to storage typically in whole pages, however the
 address_space has finer control of write sizes.
 
 The read process essentially only requires 'readpage'.  The write
-process is more complicated and uses prepare_write/commit_write or
+process is more complicated and uses write_begin/write_end or
 set_page_dirty to write data into the address_space, and writepage,
 sync_page, and writepages to writeback data to storage.
 
@@ -521,8 +521,6 @@ struct address_space_operations {
 	int (*set_page_dirty)(struct page *page);
 	int (*readpages)(struct file *filp, struct address_space *mapping,
 			struct list_head *pages, unsigned nr_pages);
-	int (*prepare_write)(struct file *, struct page *, unsigned, unsigned);
-	int (*commit_write)(struct file *, struct page *, unsigned, unsigned);
 	int (*write_begin)(struct file *, struct address_space *mapping,
 				loff_t pos, unsigned len, unsigned flags,
 				struct page **pagep, void **fsdata);
@@ -598,37 +596,7 @@ struct address_space_operations {
 	readpages is only used for read-ahead, so read errors are
   	ignored.  If anything goes wrong, feel free to give up.
 
-  prepare_write: called by the generic write path in VM to set up a write
-  	request for a page.  This indicates to the address space that
-  	the given range of bytes is about to be written.  The
-  	address_space should check that the write will be able to
-  	complete, by allocating space if necessary and doing any other
-  	internal housekeeping.  If the write will update parts of
-  	any basic-blocks on storage, then those blocks should be
-  	pre-read (if they haven't been read already) so that the
-  	updated blocks can be written out properly.
-	The page will be locked.
-
-	Note: the page _must not_ be marked uptodate in this function
-	(or anywhere else) unless it actually is uptodate right now. As
-	soon as a page is marked uptodate, it is possible for a concurrent
-	read(2) to copy it to userspace.
-
-  commit_write: If prepare_write succeeds, new data will be copied
-        into the page and then commit_write will be called.  It will
-        typically update the size of the file (if appropriate) and
-        mark the inode as dirty, and do any other related housekeeping
-        operations.  It should avoid returning an error if possible -
-        errors should have been handled by prepare_write.
-
-  write_begin: This is intended as a replacement for prepare_write. The
-	key differences being that:
-		- it returns a locked page (in *pagep) rather than being
-		  given a pre locked page;
-		- it must be able to cope with short writes (where the
-		  length passed to write_begin is greater than the number
-		  of bytes copied into the page).
-
+  write_begin:
 	Called by the generic buffered write code to ask the filesystem to
 	prepare to write len bytes at the given offset in the file. The
 	address_space should check that the write will be able to complete,
@@ -640,6 +608,9 @@ struct address_space_operations {
         The filesystem must return the locked pagecache page for the specified
 	offset, in *pagep, for the caller to write into.
 
+	It must be able to cope with short writes (where the length passed to
+	write_begin is greater than the number of bytes copied into the page).
+
 	flags is a field for AOP_FLAG_xxx flags, described in
 	include/linux/fs.h.
 

Documentation/i2c/busses/i2c-sis96x

@@ -42,7 +42,7 @@ I suspect that this driver could be made to work for the following SiS
 chipsets as well: 635, and 635T. If anyone owns a board with those chips
 AND is willing to risk crashing & burning an otherwise well-behaved kernel
 in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <i2c@lm-sensors.org>.  Please send bug
+via the linux-i2c mailing list: <linux-i2c@vger.kernel.org>.  Please send bug
 reports and/or success stories as well.
 
 

Documentation/ia64/.gitignore

@@ -0,0 +1 @@
+aliasing-test

Documentation/isdn/CREDITS

@@ -5,7 +5,7 @@ I want to thank all who contributed to this project and especially to:
 Thomas Bogendörfer (tsbogend@bigbug.franken.de)
   Tester, lots of bugfixes and hints.
 
-Alan Cox (alan@redhat.com)
+Alan Cox (alan@lxorguk.ukuu.org.uk)
   For help getting into standard-kernel.
 
 Henner Eisen (eis@baty.hanse.de)

Documentation/ja_JP/HOWTO

@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2008/08/21
+Last Updated: 2008/10/24
 ==================================
 これは、
-linux-2.6.27/Documentation/HOWTO
+linux-2.6.28/Documentation/HOWTO
 の和訳です。
 
 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2008/8/5
+翻訳日： 2008/10/24
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： 松倉さん <nbh--mats at nifty dot com>
          小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -110,8 +110,8 @@ Linux カーネルソースツリーは幅広い範囲のドキュメントを
 新しいドキュメントファイルも追加することを勧めます。
 カーネルの変更が、カーネルがユーザ空間に公開しているインターフェイスの
 変更を引き起こす場合、その変更を説明するマニュアルページのパッチや情報
-をマニュアルページのメンテナ mtk.manpages@gmail.com に送ることを勧めま
-す。
+をマニュアルページのメンテナ mtk.manpages@gmail.com に送り、CC を
+linux-api@ver.kernel.org に送ることを勧めます。
 
 以下はカーネルソースツリーに含まれている読んでおくべきファイルの一覧で
 す-
@@ -149,7 +149,7 @@ Linux カーネルソースツリーは幅広い範囲のドキュメントを
      この他にパッチを作る方法についてのよくできた記述は-
 
 	"The Perfect Patch"
-		http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+		http://userweb.kernel.org/~akpm/stuff/tpp.txt
 	"Linux kernel patch submission format"
 		http://linux.yyz.us/patch-format.html
 
@@ -664,7 +664,7 @@ Linux カーネルコミュニティは、一度に大量のコードの塊を
 これについて全てがどのようにあるべきかについての詳細は、以下のドキュメ
 ントの ChangeLog セクションを見てください-
   "The Perfect Patch"
-      http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+      http://userweb.kernel.org/~akpm/stuff/tpp.txt
 
 これらのどれもが、時にはとても困難です。これらの慣例を完璧に実施するに
 は数年かかるかもしれません。これは継続的な改善のプロセスであり、そのた

Documentation/networking/.gitignore

@@ -0,0 +1 @@
+ifenslave

Documentation/networking/dmfe.txt

@@ -60,6 +60,6 @@ Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
 Contributors:
 
 Marcelo Tosatti <marcelo@conectiva.com.br>
-Alan Cox <alan@redhat.com>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
 Jeff Garzik <jgarzik@pobox.com>
 Vojtech Pavlik <vojtech@suse.cz>

Documentation/pcmcia/.gitignore

@@ -0,0 +1 @@
+crc32hash

Documentation/scheduler/sched-design-CFS.txt

@@ -92,7 +92,7 @@ other HZ detail.  Thus the CFS scheduler has no notion of "timeslices" in the
 way the previous scheduler had, and has no heuristics whatsoever.  There is
 only one central tunable (you have to switch on CONFIG_SCHED_DEBUG):
 
-   /proc/sys/kernel/sched_granularity_ns
+   /proc/sys/kernel/sched_min_granularity_ns
 
 which can be used to tune the scheduler from "desktop" (i.e., low latencies) to
 "server" (i.e., good batching) workloads.  It defaults to a setting suitable

Documentation/scsi/aacraid.txt

@@ -128,7 +128,7 @@ Supported Cards/Chipsets
 
 People
 -------------------------
-Alan Cox <alan@redhat.com>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
 Christoph Hellwig <hch@infradead.org>	(updates for new-style PCI probing and SCSI host registration,
 					 small cleanups/fixes)
 Matt Domsch <matt_domsch@dell.com>	(revision ioctl, adapter messages)

Documentation/spi/.gitignore

@@ -0,0 +1,2 @@
+spidev_fdx
+spidev_test

Documentation/stable_kernel_rules.txt

@@ -12,6 +12,7 @@ Rules on what kind of patches are accepted, and which ones are not, into the
    marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
    security issue, or some "oh, that's not good" issue.  In short, something
    critical.
+ - New device IDs and quirks are also accepted.
  - No "theoretical race condition" issues, unless an explanation of how the
    race can be exploited is also provided.
  - It cannot contain any "trivial" fixes in it (spelling changes,

Documentation/sysctl/kernel.txt

@@ -363,11 +363,21 @@ tainted:
 Non-zero if the kernel has been tainted.  Numeric values, which
 can be ORed together:
 
-  1 - A module with a non-GPL license has been loaded, this
-      includes modules with no license.
-      Set by modutils >= 2.4.9 and module-init-tools.
-  2 - A module was force loaded by insmod -f.
-      Set by modutils >= 2.4.9 and module-init-tools.
-  4 - Unsafe SMP processors: SMP with CPUs not designed for SMP.
- 64 - A module from drivers/staging was loaded.
+   1 - A module with a non-GPL license has been loaded, this
+       includes modules with no license.
+       Set by modutils >= 2.4.9 and module-init-tools.
+   2 - A module was force loaded by insmod -f.
+       Set by modutils >= 2.4.9 and module-init-tools.
+   4 - Unsafe SMP processors: SMP with CPUs not designed for SMP.
+   8 - A module was forcibly unloaded from the system by rmmod -f.
+  16 - A hardware machine check error occurred on the system.
+  32 - A bad page was discovered on the system.
+  64 - The user has asked that the system be marked "tainted".  This
+       could be because they are running software that directly modifies
+       the hardware, or for other reasons.
+ 128 - The system has died.
+ 256 - The ACPI DSDT has been overridden with one supplied by the user
+        instead of using the one provided by the hardware.
+ 512 - A kernel warning has occurred.
+1024 - A module from drivers/staging was loaded.
 

Documentation/video4linux/.gitignore

@@ -0,0 +1 @@
+v4lgrab

Documentation/video4linux/bttv/CONTRIBUTORS

@@ -3,7 +3,7 @@ Contributors to bttv:
 Michael Chu <mmchu@pobox.com>
   AverMedia fix and more flexible card recognition
 
-Alan Cox <alan@redhat.com>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
   Video4Linux interface and 2.1.x kernel adaptation
 
 Chris Kleitsch

Documentation/vm/.gitignore

@@ -0,0 +1 @@
+slabinfo

Documentation/watchdog/src/.gitignore

@@ -0,0 +1,2 @@
+watchdog-simple
+watchdog-test

MAINTAINERS

@@ -347,7 +347,7 @@ S:	Maintained
 ALI1563 I2C DRIVER
 P:	Rudolf Marek
 M:	r.marek@assembler.cz
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 ALPHA PORT
@@ -1749,7 +1749,7 @@ FREESCALE I2C CPM DRIVER
 P:	Jochen Friedrich
 M:	jochen@scram.de
 L:	linuxppc-dev@ozlabs.org
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 FREESCALE SOC FS_ENET DRIVER
@@ -2022,7 +2022,7 @@ S:	Maintained
 I2C/SMBUS STUB DRIVER
 P:	Mark M. Hoffman
 M:	mhoffman@lightlink.com
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 I2C SUBSYSTEM
@@ -2030,14 +2030,14 @@ P:	Jean Delvare (PC drivers, core)
 M:	khali@linux-fr.org
 P:	Ben Dooks (embedded platforms)
 M:	ben-linux@fluff.org
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 T:	quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
 S:	Maintained
 
 I2C-TINY-USB DRIVER
 P:	Till Harbaum
 M:	till@harbaum.org
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 T:	http://www.harbaum.org/till/i2c_tiny_usb
 S:	Maintained
 
@@ -2701,6 +2701,16 @@ M:	matthew@wil.cx
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+LTP (Linux Test Project)
+P:	Subrata Modak
+M:	subrata@linux.vnet.ibm.com
+P:	Mike Frysinger
+M:	vapier@gentoo.org
+L:	ltp-list@lists.sourceforge.net (subscribers-only)
+W:	http://ltp.sourceforge.net/
+T:	git kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
+S:	Maintained
+
 M32R ARCHITECTURE
 P:	Hirokazu Takata
 M:	takata@linux-m32r.org
@@ -3143,7 +3153,7 @@ S:	Maintained
 OPENCORES I2C BUS DRIVER
 P:	Peter Korsgaard
 M:	jacmet@sunsite.dk
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 OPROFILE
@@ -3190,7 +3200,7 @@ S:	Maintained
 PA SEMI SMBUS DRIVER
 P:	Olof Johansson
 M:	olof@lixom.net
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 PANASONIC LAPTOP ACPI EXTRAS DRIVER
@@ -3335,7 +3345,7 @@ S:	Maintained
 PNXxxxx I2C DRIVER
 P:	Vitaly Wool
 M:	vitalywool@gmail.com
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 PPP PROTOCOL DRIVERS AND COMPRESSORS
@@ -3799,7 +3809,7 @@ S:	Maintained
 SIS 96X I2C/SMBUS DRIVER
 P:	Mark M. Hoffman
 M:	mhoffman@lightlink.com
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 SIS FRAMEBUFFER DRIVER
@@ -4546,7 +4556,7 @@ S:	Maintained
 VIAPRO SMBUS DRIVER
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER

Makefile

@@ -536,7 +536,7 @@ KBUILD_CFLAGS	+= -g
 KBUILD_AFLAGS	+= -gdwarf-2
 endif
 
-ifdef CONFIG_FTRACE
+ifdef CONFIG_FUNCTION_TRACER
 KBUILD_CFLAGS	+= -pg
 endif
 

arch/arm/Kconfig

@@ -16,8 +16,7 @@ config ARM
 	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
-	select HAVE_FTRACE if (!XIP_KERNEL)
-	select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
+	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs

arch/arm/boot/compressed/Makefile

@@ -70,7 +70,7 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
 		 head.o misc.o $(OBJS)
 
-ifeq ($(CONFIG_FTRACE),y)
+ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif

arch/arm/include/asm/ftrace.h

@@ -1,7 +1,7 @@
 #ifndef _ASM_ARM_FTRACE
 #define _ASM_ARM_FTRACE
 
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
 #define MCOUNT_ADDR		((long)(mcount))
 #define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
 

arch/arm/kernel/armksyms.c

@@ -183,6 +183,6 @@ EXPORT_SYMBOL(_find_next_bit_be);
 
 EXPORT_SYMBOL(copy_page);
 
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif

arch/arm/kernel/entry-common.S

@@ -101,7 +101,7 @@ ENDPROC(ret_from_fork)
 #undef CALL
 #define CALL(x) .long x
 
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
@@ -149,7 +149,7 @@ trace:
 ftrace_stub:
 	mov pc, lr
 
-#endif /* CONFIG_FTRACE */
+#endif /* CONFIG_FUNCTION_TRACER */
 
 /*=============================================================================
  * SWI handler

arch/arm/kernel/ftrace.c

@@ -95,19 +95,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	return ret;
 }
 
-int ftrace_mcount_set(unsigned long *data)
-{
-	unsigned long pc, old;
-	unsigned long *addr = data;
-	unsigned char *new;
-
-	pc = (unsigned long)&mcount_call;
-	memcpy(&old, &mcount_call, MCOUNT_INSN_SIZE);
-	new = ftrace_call_replace(pc, *addr);
-	*addr = ftrace_modify_code(pc, (unsigned char *)&old, new);
-	return 0;
-}
-
 /* run from kstop_machine */
 int __init ftrace_dyn_arch_init(void *data)
 {

arch/ia64/include/asm/iommu.h

@@ -11,6 +11,5 @@ extern int force_iommu, no_iommu;
 extern int iommu_detected;
 extern void iommu_dma_init(void);
 extern void machvec_init(const char *name);
-extern int forbid_dac;
 
 #endif

arch/ia64/include/asm/kvm_host.h

@@ -365,7 +365,8 @@ struct kvm_vcpu_arch {
 	long itc_offset;
 	unsigned long itc_check;
 	unsigned long timer_check;
-	unsigned long timer_pending;
+	unsigned int timer_pending;
+	unsigned int timer_fired;
 
 	unsigned long vrr[8];
 	unsigned long ibr[8];
@@ -417,6 +418,9 @@ struct kvm_arch {
 	struct list_head assigned_dev_head;
 	struct dmar_domain *intel_iommu_domain;
 	struct hlist_head irq_ack_notifier_list;
+
+	unsigned long irq_sources_bitmap;
+	unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
 };
 
 union cpuid3_t {

arch/ia64/kernel/pci-dma.c

@@ -89,13 +89,6 @@ int iommu_dma_supported(struct device *dev, u64 mask)
 {
 	struct dma_mapping_ops *ops = get_dma_ops(dev);
 
-#ifdef CONFIG_PCI
-	if (mask > 0xffffffff && forbid_dac > 0) {
-		dev_info(dev, "Disallowing DAC for device\n");
-		return 0;
-	}
-#endif
-
 	if (ops->dma_supported_op)
 		return ops->dma_supported_op(dev, mask);
 

arch/ia64/kvm/Makefile

@@ -29,13 +29,18 @@ define cmd_offsets
 	 echo ""; \
 	 echo "#endif" ) > $@
 endef
+
 # We use internal rules to avoid the "is up to date" message from make
-arch/ia64/kvm/asm-offsets.s: arch/ia64/kvm/asm-offsets.c
+arch/ia64/kvm/asm-offsets.s: arch/ia64/kvm/asm-offsets.c \
+			$(wildcard $(srctree)/arch/ia64/include/asm/*.h)\
+			$(wildcard $(srctree)/include/linux/*.h)
 	$(call if_changed_dep,cc_s_c)
 
 $(obj)/$(offsets-file): arch/ia64/kvm/asm-offsets.s
 	$(call cmd,offsets)
 
+FORCE : $(obj)/$(offsets-file)
+
 #
 # Makefile for Kernel-based Virtual Machine module
 #
@@ -53,7 +58,6 @@ endif
 kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o
 obj-$(CONFIG_KVM) += kvm.o
 
-FORCE : $(obj)/$(offsets-file)
 EXTRA_CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127
 kvm-intel-objs = vmm.o vmm_ivt.o trampoline.o vcpu.o optvfault.o mmio.o \
 	vtlb.o process.o

arch/ia64/kvm/kvm-ia64.c

@@ -385,6 +385,7 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	struct kvm *kvm = vcpu->kvm;
 	struct call_data call_data;
 	int i;
+
 	call_data.ptc_g_data = p->u.ptc_g_data;
 
 	for (i = 0; i < KVM_MAX_VCPUS; i++) {
@@ -418,33 +419,41 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 	ktime_t kt;
 	long itc_diff;
 	unsigned long vcpu_now_itc;
-
 	unsigned long expires;
 	struct hrtimer *p_ht = &vcpu->arch.hlt_timer;
 	unsigned long cyc_per_usec = local_cpu_data->cyc_per_usec;
 	struct vpd *vpd = to_host(vcpu->kvm, vcpu->arch.vpd);
 
-	vcpu_now_itc = ia64_getreg(_IA64_REG_AR_ITC) + vcpu->arch.itc_offset;
+	if (irqchip_in_kernel(vcpu->kvm)) {
 
-	if (time_after(vcpu_now_itc, vpd->itm)) {
-		vcpu->arch.timer_check = 1;
-		return 1;
-	}
-	itc_diff = vpd->itm - vcpu_now_itc;
-	if (itc_diff < 0)
-		itc_diff = -itc_diff;
+		vcpu_now_itc = ia64_getreg(_IA64_REG_AR_ITC) + vcpu->arch.itc_offset;
 
-	expires = div64_u64(itc_diff, cyc_per_usec);
-	kt = ktime_set(0, 1000 * expires);
-	vcpu->arch.ht_active = 1;
-	hrtimer_start(p_ht, kt, HRTIMER_MODE_ABS);
+		if (time_after(vcpu_now_itc, vpd->itm)) {
+			vcpu->arch.timer_check = 1;
+			return 1;
+		}
+		itc_diff = vpd->itm - vcpu_now_itc;
+		if (itc_diff < 0)
+			itc_diff = -itc_diff;
+
+		expires = div64_u64(itc_diff, cyc_per_usec);
+		kt = ktime_set(0, 1000 * expires);
+
+		down_read(&vcpu->kvm->slots_lock);
+		vcpu->arch.ht_active = 1;
+		hrtimer_start(p_ht, kt, HRTIMER_MODE_ABS);
 
-	if (irqchip_in_kernel(vcpu->kvm)) {
 		vcpu->arch.mp_state = KVM_MP_STATE_HALTED;
 		kvm_vcpu_block(vcpu);
 		hrtimer_cancel(p_ht);
 		vcpu->arch.ht_active = 0;
 
+		if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests))
+			if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED)
+				vcpu->arch.mp_state =
+					KVM_MP_STATE_RUNNABLE;
+		up_read(&vcpu->kvm->slots_lock);
+
 		if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE)
 			return -EINTR;
 		return 1;
@@ -484,10 +493,6 @@ static int (*kvm_vti_exit_handlers[])(struct kvm_vcpu *vcpu,
 static const int kvm_vti_max_exit_handlers =
 		sizeof(kvm_vti_exit_handlers)/sizeof(*kvm_vti_exit_handlers);
 
-static void kvm_prepare_guest_switch(struct kvm_vcpu *vcpu)
-{
-}
-
 static uint32_t kvm_get_exit_reason(struct kvm_vcpu *vcpu)
 {
 	struct exit_ctl_data *p_exit_data;
@@ -600,8 +605,6 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 again:
 	preempt_disable();
-
-	kvm_prepare_guest_switch(vcpu);
 	local_irq_disable();
 
 	if (signal_pending(current)) {
@@ -614,7 +617,7 @@ again:
 
 	vcpu->guest_mode = 1;
 	kvm_guest_enter();
-
+	down_read(&vcpu->kvm->slots_lock);
 	r = vti_vcpu_run(vcpu, kvm_run);
 	if (r < 0) {
 		local_irq_enable();
@@ -634,9 +637,8 @@ again:
 	 * But we need to prevent reordering, hence this barrier():
 	 */
 	barrier();
-
 	kvm_guest_exit();
-
+	up_read(&vcpu->kvm->slots_lock);
 	preempt_enable();
 
 	r = kvm_handle_exit(kvm_run, vcpu);
@@ -673,6 +675,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) {
 		kvm_vcpu_block(vcpu);
+		clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
 		vcpu_put(vcpu);
 		return -EAGAIN;
 	}
@@ -778,6 +781,9 @@ static void kvm_init_vm(struct kvm *kvm)
 	kvm_build_io_pmt(kvm);
 
 	INIT_LIST_HEAD(&kvm->arch.assigned_dev_head);
+
+	/* Reserve bit 0 of irq_sources_bitmap for userspace irq source */
+	set_bit(KVM_USERSPACE_IRQ_SOURCE_ID, &kvm->arch.irq_sources_bitmap);
 }
 
 struct  kvm *kvm_arch_create_vm(void)
@@ -941,9 +947,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			mutex_lock(&kvm->lock);
-			kvm_ioapic_set_irq(kvm->arch.vioapic,
-						irq_event.irq,
-						irq_event.level);
+			kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
+				    irq_event.irq, irq_event.level);
 			mutex_unlock(&kvm->lock);
 			r = 0;
 		}
@@ -1123,15 +1128,16 @@ static enum hrtimer_restart hlt_timer_fn(struct hrtimer *data)
 	wait_queue_head_t *q;
 
 	vcpu  = container_of(data, struct kvm_vcpu, arch.hlt_timer);
+	q = &vcpu->wq;
+
 	if (vcpu->arch.mp_state != KVM_MP_STATE_HALTED)
 		goto out;
 
-	q = &vcpu->wq;
-	if (waitqueue_active(q)) {
-		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+	if (waitqueue_active(q))
 		wake_up_interruptible(q);
-	}
+
 out:
+	vcpu->arch.timer_fired = 1;
 	vcpu->arch.timer_check = 1;
 	return HRTIMER_NORESTART;
 }
@@ -1700,12 +1706,14 @@ static void vcpu_kick_intr(void *info)
 void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 {
 	int ipi_pcpu = vcpu->cpu;
+	int cpu = get_cpu();
 
 	if (waitqueue_active(&vcpu->wq))
 		wake_up_interruptible(&vcpu->wq);
 
-	if (vcpu->guest_mode)
+	if (vcpu->guest_mode && cpu != ipi_pcpu)
 		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
+	put_cpu();
 }
 
 int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
@@ -1715,13 +1723,7 @@ int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
 
 	if (!test_and_set_bit(vec, &vpd->irr[0])) {
 		vcpu->arch.irq_new_pending = 1;
-		 if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE)
-			kvm_vcpu_kick(vcpu);
-		else if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED) {
-			vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
-			if (waitqueue_active(&vcpu->wq))
-				wake_up_interruptible(&vcpu->wq);
-		}
+		kvm_vcpu_kick(vcpu);
 		return 1;
 	}
 	return 0;
@@ -1791,7 +1793,7 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
-	return 0;
+	return vcpu->arch.timer_fired;
 }
 
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)

arch/ia64/kvm/kvm_fw.c

@@ -286,6 +286,12 @@ static  u64 kvm_get_pal_call_index(struct kvm_vcpu *vcpu)
 	return index;
 }
 
+static void prepare_for_halt(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.timer_pending = 1;
+	vcpu->arch.timer_fired = 0;
+}
+
 int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 
@@ -304,11 +310,10 @@ int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		break;
 	case PAL_HALT_LIGHT:
 	{
-		vcpu->arch.timer_pending = 1;
 		INIT_PAL_STATUS_SUCCESS(result);
+		prepare_for_halt(vcpu);
 		if (kvm_highest_pending_irq(vcpu) == -1)
 			ret = kvm_emulate_halt(vcpu);
-
 	}
 		break;
 

arch/ia64/kvm/process.c

@@ -713,7 +713,7 @@ void leave_hypervisor_tail(void)
 				if (!(VCPU(v, itv) & (1 << 16))) {
 					vcpu_pend_interrupt(v, VCPU(v, itv)
 							& 0xff);
-				VMX(v, itc_check) = 0;
+					VMX(v, itc_check) = 0;
 				} else {
 					v->arch.timer_pending = 1;
 				}

arch/mips/Kconfig

@@ -238,21 +238,8 @@ config MIPS_SIM
 	  This option enables support for MIPS Technologies MIPSsim software
 	  emulator.
 
-config MARKEINS
-	bool "NEC EMMA2RH Mark-eins"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_CPU_R5000
-	help
-	  This enables support for the R5432-based NEC Mark-eins
-	  boards with R5500 CPU.
+config MACH_EMMA
+	bool "NEC EMMA series based machines"
 
 config MACH_VR41XX
 	bool "NEC VR4100 series based machines"
@@ -261,6 +248,19 @@ config MACH_VR41XX
 	select SYS_HAS_CPU_VR41XX
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
+config NXP_STB220
+	bool "NXP STB220 board"
+	select SOC_PNX833X
+	help
+	 Support for NXP Semiconductors STB220 Development Board.
+
+config NXP_STB225
+	bool "NXP 225 board"
+	select SOC_PNX833X
+	select SOC_PNX8335
+	help
+	 Support for NXP Semiconductors STB225 Development Board.
+
 config PNX8550_JBS
 	bool "NXP PNX8550 based JBS board"
 	select PNX8550
@@ -601,6 +601,7 @@ endchoice
 
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
+source "arch/mips/emma/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
@@ -849,6 +850,24 @@ config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
 
+config SOC_PNX833X
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select DMA_NONCOHERENT
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_GPIO
+	select CPU_MIPSR2_IRQ_VI
+
+config SOC_PNX8335
+	bool
+	select SOC_PNX833X
+
 config PNX8550
 	bool
 	select SOC_PNX8550
@@ -1092,6 +1111,16 @@ config CPU_R5432
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 
+config CPU_R5500
+	bool "R5500"
+	depends on SYS_HAS_CPU_R5500
+	select CPU_HAS_LLSC
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	help
+	  NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
+	  instruction set.
+
 config CPU_R6000
 	bool "R6000"
 	depends on EXPERIMENTAL
@@ -1202,6 +1231,9 @@ config SYS_HAS_CPU_R5000
 config SYS_HAS_CPU_R5432
 	bool
 
+config SYS_HAS_CPU_R5500
+	bool
+
 config SYS_HAS_CPU_R6000
 	bool
 

arch/mips/Makefile

@@ -131,6 +131,8 @@ cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips64r2 -U_
 cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
 cflags-$(CONFIG_CPU_R5432)	+= $(call cc-option,-march=r5400,-march=r5000) \
 			-Wa,--trap
+cflags-$(CONFIG_CPU_R5500)	+= $(call cc-option,-march=r5500,-march=r5000) \
+			-Wa,--trap
 cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
@@ -381,6 +383,14 @@ load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
 #
 load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
 
+# NXP STB225
+core-$(CONFIG_SOC_PNX833X)		+= arch/mips/nxp/pnx833x/common/
+cflags-$(CONFIG_SOC_PNX833X)	+= -Iarch/mips/include/asm/mach-pnx833x
+libs-$(CONFIG_NXP_STB220)		+= arch/mips/nxp/pnx833x/stb22x/
+load-$(CONFIG_NXP_STB220)		+= 0xffffffff80001000
+libs-$(CONFIG_NXP_STB225)		+= arch/mips/nxp/pnx833x/stb22x/
+load-$(CONFIG_NXP_STB225)		+= 0xffffffff80001000
+
 #
 # Common NXP PNX8550
 #
@@ -399,14 +409,17 @@ load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
 libs-$(CONFIG_PNX8550_STB810)	+= arch/mips/nxp/pnx8550/stb810/
 load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
 
-# NEC EMMA2RH boards
 #
-core-$(CONFIG_EMMA2RH)          += arch/mips/emma2rh/common/
-cflags-$(CONFIG_EMMA2RH)        += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
+# Common NEC EMMAXXX
+#
+core-$(CONFIG_SOC_EMMA)		+= arch/mips/emma/common/
+cflags-$(CONFIG_SOC_EMMA2RH)	+= -I$(srctree)/arch/mips/include/asm/mach-emma2rh
 
+#
 # NEC EMMA2RH Mark-eins
-core-$(CONFIG_MARKEINS)         += arch/mips/emma2rh/markeins/
-load-$(CONFIG_MARKEINS)         += 0xffffffff88100000
+#
+core-$(CONFIG_NEC_MARKEINS)	+= arch/mips/emma/markeins/
+load-$(CONFIG_NEC_MARKEINS)	+= 0xffffffff88100000
 
 #
 # SGI IP22 (Indy/Indigo2)

arch/mips/alchemy/common/platform.c

@@ -17,6 +17,8 @@
 #include <linux/init.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
 
 #define PORT(_base, _irq)				\
 	{						\
@@ -163,24 +165,6 @@ static struct resource au1xxx_usb_gdt_resources[] = {
 	},
 };
 
-static struct resource au1xxx_mmc_resources[] = {
-	[0] = {
-		.start          = SD0_PHYS_ADDR,
-		.end            = SD0_PHYS_ADDR + 0x7ffff,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= SD1_PHYS_ADDR,
-		.end 		= SD1_PHYS_ADDR + 0x7ffff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start          = AU1200_SD_INT,
-		.end            = AU1200_SD_INT,
-		.flags          = IORESOURCE_IRQ,
-	}
-};
-
 static u64 udc_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_gdt_device = {
@@ -249,16 +233,79 @@ static struct platform_device au1200_lcd_device = {
 
 static u64 au1xxx_mmc_dmamask =  DMA_32BIT_MASK;
 
-static struct platform_device au1xxx_mmc_device = {
+extern struct au1xmmc_platform_data au1xmmc_platdata[2];
+
+static struct resource au1200_mmc0_resources[] = {
+	[0] = {
+		.start          = SD0_PHYS_ADDR,
+		.end            = SD0_PHYS_ADDR + 0x7ffff,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_SD_INT,
+		.end		= AU1200_SD_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= DSCR_CMD0_SDMS_TX0,
+		.end		= DSCR_CMD0_SDMS_TX0,
+		.flags		= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start          = DSCR_CMD0_SDMS_RX0,
+		.end		= DSCR_CMD0_SDMS_RX0,
+		.flags          = IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device au1200_mmc0_device = {
 	.name = "au1xxx-mmc",
 	.id = 0,
 	.dev = {
-		.dma_mask               = &au1xxx_mmc_dmamask,
-		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= &au1xmmc_platdata[0],
 	},
-	.num_resources  = ARRAY_SIZE(au1xxx_mmc_resources),
-	.resource       = au1xxx_mmc_resources,
+	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
+	.resource	= au1200_mmc0_resources,
 };
+
+#ifndef CONFIG_MIPS_DB1200
+static struct resource au1200_mmc1_resources[] = {
+	[0] = {
+		.start          = SD1_PHYS_ADDR,
+		.end            = SD1_PHYS_ADDR + 0x7ffff,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_SD_INT,
+		.end		= AU1200_SD_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= DSCR_CMD0_SDMS_TX1,
+		.end		= DSCR_CMD0_SDMS_TX1,
+		.flags		= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start          = DSCR_CMD0_SDMS_RX1,
+		.end		= DSCR_CMD0_SDMS_RX1,
+		.flags          = IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device au1200_mmc1_device = {
+	.name = "au1xxx-mmc",
+	.id = 1,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= &au1xmmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc1_resources),
+	.resource	= au1200_mmc1_resources,
+};
+#endif /* #ifndef CONFIG_MIPS_DB1200 */
 #endif /* #ifdef CONFIG_SOC_AU1200 */
 
 static struct platform_device au1x00_pcmcia_device = {
@@ -296,7 +343,10 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xxx_usb_gdt_device,
 	&au1xxx_usb_otg_device,
 	&au1200_lcd_device,
-	&au1xxx_mmc_device,
+	&au1200_mmc0_device,
+#ifndef CONFIG_MIPS_DB1200
+	&au1200_mmc1_device,
+#endif
 #endif
 #ifdef SMBUS_PSC_BASE
 	&pbdb_smbus_device,

arch/mips/alchemy/pb1200/platform.c

@@ -20,9 +20,90 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/leds.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+
+static int mmc_activity;
+
+static void pb1200mmc0_set_power(void *mmc_host, int state)
+{
+	if (state)
+		bcsr->board |= BCSR_BOARD_SD0PWR;
+	else
+		bcsr->board &= ~BCSR_BOARD_SD0PWR;
+
+	au_sync_delay(1);
+}
+
+static int pb1200mmc0_card_readonly(void *mmc_host)
+{
+	return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0;
+}
+
+static int pb1200mmc0_card_inserted(void *mmc_host)
+{
+	return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0;
+}
+
+static void pb1200_mmcled_set(struct led_classdev *led,
+			enum led_brightness brightness)
+{
+	if (brightness != LED_OFF) {
+		if (++mmc_activity == 1)
+			bcsr->disk_leds &= ~(1 << 8);
+	} else {
+		if (--mmc_activity == 0)
+			bcsr->disk_leds |= (1 << 8);
+	}
+}
+
+static struct led_classdev pb1200mmc_led = {
+	.brightness_set	= pb1200_mmcled_set,
+};
+
+#ifndef CONFIG_MIPS_DB1200
+static void pb1200mmc1_set_power(void *mmc_host, int state)
+{
+	if (state)
+		bcsr->board |= BCSR_BOARD_SD1PWR;
+	else
+		bcsr->board &= ~BCSR_BOARD_SD1PWR;
+
+	au_sync_delay(1);
+}
+
+static int pb1200mmc1_card_readonly(void *mmc_host)
+{
+	return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0;
+}
+
+static int pb1200mmc1_card_inserted(void *mmc_host)
+{
+	return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0;
+}
+#endif
+
+const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
+	[0] = {
+		.set_power	= pb1200mmc0_set_power,
+		.card_inserted	= pb1200mmc0_card_inserted,
+		.card_readonly	= pb1200mmc0_card_readonly,
+		.cd_setup	= NULL,		/* use poll-timer in driver */
+		.led		= &pb1200mmc_led,
+	},
+#ifndef CONFIG_MIPS_DB1200
+	[1] = {
+		.set_power	= pb1200mmc1_set_power,
+		.card_inserted	= pb1200mmc1_card_inserted,
+		.card_readonly	= pb1200mmc1_card_readonly,
+		.cd_setup	= NULL,		/* use poll-timer in driver */
+		.led		= &pb1200mmc_led,
+	},
+#endif
+};
 
 static struct resource ide_resources[] = {
 	[0] = {

arch/mips/configs/pnx8335-stb225_defconfig

@@ -0,0 +1,1149 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26
+# Sat Jul 26 09:02:59 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+CONFIG_NXP_STB225=y
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SOC_PNX833X=y
+CONFIG_SOC_PNX8335=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_128=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=128
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=y
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x18000000
+CONFIG_MTD_PHYSMAP_LEN=0x04000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PNX8XXX=y
+CONFIG_SERIAL_PNX8XXX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=y
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_MT312 is not set
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
+# CONFIG_DVB_L64781 is not set
+CONFIG_DVB_TDA1004X=y
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+
+#
+# SEC control devices for DVB-S
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
+# CONFIG_DVB_ISL6421 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_MIPS=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=m
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_KERNEL_TESTS is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_PRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/mips/emma/Kconfig

@@ -0,0 +1,29 @@
+choice
+	prompt "Machine type"
+	depends on MACH_EMMA
+	default NEC_MARKEINS
+
+config NEC_MARKEINS
+	bool "NEC EMMA2RH Mark-eins board"
+	select SOC_EMMA2RH
+	select HW_HAS_PCI
+	help
+	  This enables support for the NEC Electronics Mark-eins boards.
+
+endchoice
+
+config SOC_EMMA2RH
+	bool
+	select SOC_EMMA
+	select SYS_HAS_CPU_R5500
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+config SOC_EMMA
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_BIG_ENDIAN

arch/mips/emma2rh/common/Makefile → arch/mips/emma/common/Makefile

@@ -10,4 +10,4 @@
 #  (at your option) any later version.
 #
 
-obj-$(CONFIG_MARKEINS)	+= irq.o irq_emma2rh.o prom.o
+obj-$(CONFIG_NEC_MARKEINS)	+= prom.o

arch/mips/emma2rh/common/prom.c → arch/mips/emma/common/prom.c

@@ -29,11 +29,11 @@
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 const char *get_system_type(void)
 {
-#if defined(CONFIG_MARKEINS)
+#ifdef CONFIG_NEC_MARKEINS
 	return "NEC EMMA2RH Mark-eins";
 #else
 #error  Unknown NEC board
@@ -60,7 +60,7 @@ void __init prom_init(void)
 		strcat(arcs_cmdline, " ");
 	}
 
-#if defined(CONFIG_MARKEINS)
+#ifdef CONFIG_NEC_MARKEINS
 	add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM);
 #else
 #error  Unknown NEC board

arch/mips/emma2rh/markeins/Makefile → arch/mips/emma/markeins/Makefile

@@ -10,4 +10,4 @@
 #  (at your option) any later version.
 #
 
-obj-$(CONFIG_MARKEINS) += irq.o irq_markeins.o setup.o led.o platform.o
+obj-$(CONFIG_NEC_MARKEINS) += irq.o setup.o led.o platform.o

arch/mips/emma/markeins/irq.c

@@ -0,0 +1,331 @@
+/*
+ *  arch/mips/emma2rh/markeins/irq.c
+ *      This file defines the irq handler for EMMA2RH.
+ *
+ *  Copyright (C) NEC Electronics Corporation 2004-2006
+ *
+ *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
+ *
+ *	Copyright 2001 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/delay.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/system.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+
+#include <asm/emma/emma2rh.h>
+
+static void emma2rh_irq_enable(unsigned int irq)
+{
+	u32 reg_value;
+	u32 reg_bitmask;
+	u32 reg_index;
+
+	irq -= EMMA2RH_IRQ_BASE;
+
+	reg_index = EMMA2RH_BHIF_INT_EN_0 +
+		    (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32);
+	reg_value = emma2rh_in32(reg_index);
+	reg_bitmask = 0x1 << (irq % 32);
+	emma2rh_out32(reg_index, reg_value | reg_bitmask);
+}
+
+static void emma2rh_irq_disable(unsigned int irq)
+{
+	u32 reg_value;
+	u32 reg_bitmask;
+	u32 reg_index;
+
+	irq -= EMMA2RH_IRQ_BASE;
+
+	reg_index = EMMA2RH_BHIF_INT_EN_0 +
+		    (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32);
+	reg_value = emma2rh_in32(reg_index);
+	reg_bitmask = 0x1 << (irq % 32);
+	emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
+}
+
+struct irq_chip emma2rh_irq_controller = {
+	.name = "emma2rh_irq",
+	.ack = emma2rh_irq_disable,
+	.mask = emma2rh_irq_disable,
+	.mask_ack = emma2rh_irq_disable,
+	.unmask = emma2rh_irq_enable,
+};
+
+void emma2rh_irq_init(void)
+{
+	u32 i;
+
+	for (i = 0; i < NUM_EMMA2RH_IRQ; i++)
+		set_irq_chip_and_handler(EMMA2RH_IRQ_BASE + i,
+					 &emma2rh_irq_controller,
+					 handle_level_irq);
+}
+
+static void emma2rh_sw_irq_enable(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_SW_IRQ_BASE;
+
+	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
+	reg |= 1 << irq;
+	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
+}
+
+static void emma2rh_sw_irq_disable(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_SW_IRQ_BASE;
+
+	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
+	reg &= ~(1 << irq);
+	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
+}
+
+struct irq_chip emma2rh_sw_irq_controller = {
+	.name = "emma2rh_sw_irq",
+	.ack = emma2rh_sw_irq_disable,
+	.mask = emma2rh_sw_irq_disable,
+	.mask_ack = emma2rh_sw_irq_disable,
+	.unmask = emma2rh_sw_irq_enable,
+};
+
+void emma2rh_sw_irq_init(void)
+{
+	u32 i;
+
+	for (i = 0; i < NUM_EMMA2RH_IRQ_SW; i++)
+		set_irq_chip_and_handler(EMMA2RH_SW_IRQ_BASE + i,
+					 &emma2rh_sw_irq_controller,
+					 handle_level_irq);
+}
+
+static void emma2rh_gpio_irq_enable(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_GPIO_IRQ_BASE;
+
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+	reg |= 1 << irq;
+	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
+}
+
+static void emma2rh_gpio_irq_disable(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_GPIO_IRQ_BASE;
+
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+	reg &= ~(1 << irq);
+	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
+}
+
+static void emma2rh_gpio_irq_ack(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_GPIO_IRQ_BASE;
+	emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq));
+
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+	reg &= ~(1 << irq);
+	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
+}
+
+static void emma2rh_gpio_irq_end(unsigned int irq)
+{
+	u32 reg;
+
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+
+		irq -= EMMA2RH_GPIO_IRQ_BASE;
+
+		reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+		reg |= 1 << irq;
+		emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
+	}
+}
+
+struct irq_chip emma2rh_gpio_irq_controller = {
+	.name = "emma2rh_gpio_irq",
+	.ack = emma2rh_gpio_irq_ack,
+	.mask = emma2rh_gpio_irq_disable,
+	.mask_ack = emma2rh_gpio_irq_ack,
+	.unmask = emma2rh_gpio_irq_enable,
+	.end = emma2rh_gpio_irq_end,
+};
+
+void emma2rh_gpio_irq_init(void)
+{
+	u32 i;
+
+	for (i = 0; i < NUM_EMMA2RH_IRQ_GPIO; i++)
+		set_irq_chip(EMMA2RH_GPIO_IRQ_BASE + i,
+			     &emma2rh_gpio_irq_controller);
+}
+
+static struct irqaction irq_cascade = {
+	   .handler = no_action,
+	   .flags = 0,
+	   .mask = CPU_MASK_NONE,
+	   .name = "cascade",
+	   .dev_id = NULL,
+	   .next = NULL,
+};
+
+/*
+ * the first level int-handler will jump here if it is a emma2rh irq
+ */
+void emma2rh_irq_dispatch(void)
+{
+	u32 intStatus;
+	u32 bitmask;
+	u32 i;
+
+	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) &
+		    emma2rh_in32(EMMA2RH_BHIF_INT_EN_0);
+
+#ifdef EMMA2RH_SW_CASCADE
+	if (intStatus &
+	    (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
+		u32 swIntStatus;
+		swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT)
+		    & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
+		for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
+			if (swIntStatus & bitmask) {
+				do_IRQ(EMMA2RH_SW_IRQ_BASE + i);
+				return;
+			}
+		}
+	}
+#endif
+
+	for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
+		if (intStatus & bitmask) {
+			do_IRQ(EMMA2RH_IRQ_BASE + i);
+			return;
+		}
+	}
+
+	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) &
+		    emma2rh_in32(EMMA2RH_BHIF_INT_EN_1);
+
+#ifdef EMMA2RH_GPIO_CASCADE
+	if (intStatus &
+	    (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
+		u32 gpioIntStatus;
+		gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST)
+		    & emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+		for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
+			if (gpioIntStatus & bitmask) {
+				do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i);
+				return;
+			}
+		}
+	}
+#endif
+
+	for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) {
+		if (intStatus & bitmask) {
+			do_IRQ(EMMA2RH_IRQ_BASE + i);
+			return;
+		}
+	}
+
+	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) &
+		    emma2rh_in32(EMMA2RH_BHIF_INT_EN_2);
+
+	for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) {
+		if (intStatus & bitmask) {
+			do_IRQ(EMMA2RH_IRQ_BASE + i);
+			return;
+		}
+	}
+}
+
+void __init arch_init_irq(void)
+{
+	u32 reg;
+
+	/* by default, interrupts are disabled. */
+	emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0);
+	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0);
+
+	clear_c0_status(0xff00);
+	set_c0_status(0x0400);
+
+#define GPIO_PCI (0xf<<15)
+	/* setup GPIO interrupt for PCI interface */
+	/* direction input */
+	reg = emma2rh_in32(EMMA2RH_GPIO_DIR);
+	emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI);
+	/* disable interrupt */
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI);
+	/* level triggerd */
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE);
+	emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI);
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A);
+	emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI));
+	/* interrupt clear */
+	emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI);
+
+	/* init all controllers */
+	emma2rh_irq_init();
+	emma2rh_sw_irq_init();
+	emma2rh_gpio_irq_init();
+	mips_cpu_irq_init();
+
+	/* setup cascade interrupts */
+	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
+	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
+	setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+        unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(CPU_IRQ_BASE + 7);
+	else if (pending & STATUSF_IP2)
+		emma2rh_irq_dispatch();
+	else if (pending & STATUSF_IP1)
+		do_IRQ(CPU_IRQ_BASE + 1);
+	else if (pending & STATUSF_IP0)
+		do_IRQ(CPU_IRQ_BASE + 0);
+	else
+		spurious_interrupt();
+}

arch/mips/emma2rh/markeins/led.c → arch/mips/emma/markeins/led.c

@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/string.h>
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 const unsigned long clear = 0x20202020;
 

arch/mips/emma2rh/markeins/platform.c → arch/mips/emma/markeins/platform.c

@@ -36,7 +36,7 @@
 #include <asm/reboot.h>
 #include <asm/traps.h>
 
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 
 #define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */

arch/mips/emma2rh/markeins/setup.c → arch/mips/emma/markeins/setup.c

@@ -29,7 +29,7 @@
 #include <asm/time.h>
 #include <asm/reboot.h>
 
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 #define	USE_CPU_COUNTER_TIMER	/* whether we use cpu counter */
 

arch/mips/emma2rh/common/irq.c

@@ -1,105 +0,0 @@
-/*
- *  arch/mips/emma2rh/common/irq.c
- *      This file is common irq dispatcher.
- *
- *  Copyright (C) NEC Electronics Corporation 2005-2006
- *
- *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
- *
- *	Copyright 2001 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-
-#include <asm/system.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-
-#include <asm/emma2rh/emma2rh.h>
-
-/*
- * the first level int-handler will jump here if it is a emma2rh irq
- */
-void emma2rh_irq_dispatch(void)
-{
-	u32 intStatus;
-	u32 bitmask;
-	u32 i;
-
-	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0)
-	    & emma2rh_in32(EMMA2RH_BHIF_INT_EN_0);
-
-#ifdef EMMA2RH_SW_CASCADE
-	if (intStatus &
-	    (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
-		u32 swIntStatus;
-		swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT)
-		    & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
-		for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
-			if (swIntStatus & bitmask) {
-				do_IRQ(EMMA2RH_SW_IRQ_BASE + i);
-				return;
-			}
-		}
-	}
-#endif
-
-	for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
-		if (intStatus & bitmask) {
-			do_IRQ(EMMA2RH_IRQ_BASE + i);
-			return;
-		}
-	}
-
-	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1)
-	    & emma2rh_in32(EMMA2RH_BHIF_INT_EN_1);
-
-#ifdef EMMA2RH_GPIO_CASCADE
-	if (intStatus &
-	    (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
-		u32 gpioIntStatus;
-		gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST)
-		    & emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
-		for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
-			if (gpioIntStatus & bitmask) {
-				do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i);
-				return;
-			}
-		}
-	}
-#endif
-
-	for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) {
-		if (intStatus & bitmask) {
-			do_IRQ(EMMA2RH_IRQ_BASE + i);
-			return;
-		}
-	}
-
-	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2)
-	    & emma2rh_in32(EMMA2RH_BHIF_INT_EN_2);
-
-	for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) {
-		if (intStatus & bitmask) {
-			do_IRQ(EMMA2RH_IRQ_BASE + i);
-			return;
-		}
-	}
-}

arch/mips/emma2rh/common/irq_emma2rh.c

@@ -1,106 +0,0 @@
-/*
- *  arch/mips/emma2rh/common/irq_emma2rh.c
- *      This file defines the irq handler for EMMA2RH.
- *
- *  Copyright (C) NEC Electronics Corporation 2005-2006
- *
- *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c
- *
- *	Copyright 2001 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * EMMA2RH defines 64 IRQs.
- *
- * This file exports one function:
- *	emma2rh_irq_init(u32 irq_base);
- */
-
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-#include <asm/debug.h>
-
-#include <asm/emma2rh/emma2rh.h>
-
-/* number of total irqs supported by EMMA2RH */
-#define	NUM_EMMA2RH_IRQ		96
-
-static int emma2rh_irq_base = -1;
-
-void ll_emma2rh_irq_enable(int);
-void ll_emma2rh_irq_disable(int);
-
-static void emma2rh_irq_enable(unsigned int irq)
-{
-	ll_emma2rh_irq_enable(irq - emma2rh_irq_base);
-}
-
-static void emma2rh_irq_disable(unsigned int irq)
-{
-	ll_emma2rh_irq_disable(irq - emma2rh_irq_base);
-}
-
-struct irq_chip emma2rh_irq_controller = {
-	.name = "emma2rh_irq",
-	.ack = emma2rh_irq_disable,
-	.mask = emma2rh_irq_disable,
-	.mask_ack = emma2rh_irq_disable,
-	.unmask = emma2rh_irq_enable,
-};
-
-void emma2rh_irq_init(u32 irq_base)
-{
-	u32 i;
-
-	for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ; i++)
-		set_irq_chip_and_handler(i, &emma2rh_irq_controller,
-					 handle_level_irq);
-
-	emma2rh_irq_base = irq_base;
-}
-
-void ll_emma2rh_irq_enable(int emma2rh_irq)
-{
-	u32 reg_value;
-	u32 reg_bitmask;
-	u32 reg_index;
-
-	reg_index = EMMA2RH_BHIF_INT_EN_0
-	    + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0)
-	    * (emma2rh_irq / 32);
-	reg_value = emma2rh_in32(reg_index);
-	reg_bitmask = 0x1 << (emma2rh_irq % 32);
-	db_assert((reg_value & reg_bitmask) == 0);
-	emma2rh_out32(reg_index, reg_value | reg_bitmask);
-}
-
-void ll_emma2rh_irq_disable(int emma2rh_irq)
-{
-	u32 reg_value;
-	u32 reg_bitmask;
-	u32 reg_index;
-
-	reg_index = EMMA2RH_BHIF_INT_EN_0
-	    + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0)
-	    * (emma2rh_irq / 32);
-	reg_value = emma2rh_in32(reg_index);
-	reg_bitmask = 0x1 << (emma2rh_irq % 32);
-	db_assert((reg_value & reg_bitmask) != 0);
-	emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
-}

arch/mips/emma2rh/markeins/irq.c

@@ -1,132 +0,0 @@
-/*
- *  arch/mips/emma2rh/markeins/irq.c
- *      This file defines the irq handler for EMMA2RH.
- *
- *  Copyright (C) NEC Electronics Corporation 2004-2006
- *
- *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
- *
- *	Copyright 2001 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/delay.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/system.h>
-#include <asm/mipsregs.h>
-#include <asm/debug.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-
-#include <asm/emma2rh/emma2rh.h>
-
-/*
- * IRQ mapping
- *
- *  0-7: 8 CPU interrupts
- *	0 -	software interrupt 0
- *	1 - 	software interrupt 1
- *	2 - 	most Vrc5477 interrupts are routed to this pin
- *	3 - 	(optional) some other interrupts routed to this pin for debugg
- *	4 - 	not used
- *	5 - 	not used
- *	6 - 	not used
- *	7 - 	cpu timer (used by default)
- *
- */
-
-extern void emma2rh_sw_irq_init(u32 base);
-extern void emma2rh_gpio_irq_init(u32 base);
-extern void emma2rh_irq_init(u32 base);
-extern void emma2rh_irq_dispatch(void);
-
-static struct irqaction irq_cascade = {
-	   .handler = no_action,
-	   .flags = 0,
-	   .mask = CPU_MASK_NONE,
-	   .name = "cascade",
-	   .dev_id = NULL,
-	   .next = NULL,
-};
-
-void __init arch_init_irq(void)
-{
-	u32 reg;
-
-	db_run(printk("markeins_irq_setup invoked.\n"));
-
-	/* by default, interrupts are disabled. */
-	emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0);
-	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0);
-
-	clear_c0_status(0xff00);
-	set_c0_status(0x0400);
-
-#define GPIO_PCI (0xf<<15)
-	/* setup GPIO interrupt for PCI interface */
-	/* direction input */
-	reg = emma2rh_in32(EMMA2RH_GPIO_DIR);
-	emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI);
-	/* disable interrupt */
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
-	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI);
-	/* level triggerd */
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE);
-	emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI);
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A);
-	emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI));
-	/* interrupt clear */
-	emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI);
-
-	/* init all controllers */
-	emma2rh_irq_init(EMMA2RH_IRQ_BASE);
-	emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE);
-	emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE);
-	mips_cpu_irq_init();
-
-	/* setup cascade interrupts */
-	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
-	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
-	setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-        unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (pending & STATUSF_IP7)
-		do_IRQ(CPU_IRQ_BASE + 7);
-	else if (pending & STATUSF_IP2)
-		emma2rh_irq_dispatch();
-	else if (pending & STATUSF_IP1)
-		do_IRQ(CPU_IRQ_BASE + 1);
-	else if (pending & STATUSF_IP0)
-		do_IRQ(CPU_IRQ_BASE + 0);
-	else
-		spurious_interrupt();
-}
-
-

arch/mips/emma2rh/markeins/irq_markeins.c

@@ -1,158 +0,0 @@
-/*
- *  arch/mips/emma2rh/markeins/irq_markeins.c
- *      This file defines the irq handler for Mark-eins.
- *
- *  Copyright (C) NEC Electronics Corporation 2004-2006
- *
- *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c
- *
- *	Copyright 2001 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-#include <asm/debug.h>
-#include <asm/emma2rh/emma2rh.h>
-
-static int emma2rh_sw_irq_base = -1;
-static int emma2rh_gpio_irq_base = -1;
-
-void ll_emma2rh_sw_irq_enable(int reg);
-void ll_emma2rh_sw_irq_disable(int reg);
-void ll_emma2rh_gpio_irq_enable(int reg);
-void ll_emma2rh_gpio_irq_disable(int reg);
-
-static void emma2rh_sw_irq_enable(unsigned int irq)
-{
-	ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base);
-}
-
-static void emma2rh_sw_irq_disable(unsigned int irq)
-{
-	ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base);
-}
-
-struct irq_chip emma2rh_sw_irq_controller = {
-	.name = "emma2rh_sw_irq",
-	.ack = emma2rh_sw_irq_disable,
-	.mask = emma2rh_sw_irq_disable,
-	.mask_ack = emma2rh_sw_irq_disable,
-	.unmask = emma2rh_sw_irq_enable,
-};
-
-void emma2rh_sw_irq_init(u32 irq_base)
-{
-	u32 i;
-
-	for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_SW; i++)
-		set_irq_chip_and_handler(i, &emma2rh_sw_irq_controller,
-					 handle_level_irq);
-
-	emma2rh_sw_irq_base = irq_base;
-}
-
-void ll_emma2rh_sw_irq_enable(int irq)
-{
-	u32 reg;
-
-	db_assert(irq >= 0);
-	db_assert(irq < NUM_EMMA2RH_IRQ_SW);
-
-	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
-	reg |= 1 << irq;
-	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
-}
-
-void ll_emma2rh_sw_irq_disable(int irq)
-{
-	u32 reg;
-
-	db_assert(irq >= 0);
-	db_assert(irq < 32);
-
-	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
-	reg &= ~(1 << irq);
-	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
-}
-
-static void emma2rh_gpio_irq_enable(unsigned int irq)
-{
-	ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
-}
-
-static void emma2rh_gpio_irq_disable(unsigned int irq)
-{
-	ll_emma2rh_gpio_irq_disable(irq - emma2rh_gpio_irq_base);
-}
-
-static void emma2rh_gpio_irq_ack(unsigned int irq)
-{
-	irq -= emma2rh_gpio_irq_base;
-	emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq));
-	ll_emma2rh_gpio_irq_disable(irq);
-}
-
-static void emma2rh_gpio_irq_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
-}
-
-struct irq_chip emma2rh_gpio_irq_controller = {
-	.name = "emma2rh_gpio_irq",
-	.ack = emma2rh_gpio_irq_ack,
-	.mask = emma2rh_gpio_irq_disable,
-	.mask_ack = emma2rh_gpio_irq_ack,
-	.unmask = emma2rh_gpio_irq_enable,
-	.end = emma2rh_gpio_irq_end,
-};
-
-void emma2rh_gpio_irq_init(u32 irq_base)
-{
-	u32 i;
-
-	for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_GPIO; i++)
-		set_irq_chip(i, &emma2rh_gpio_irq_controller);
-
-	emma2rh_gpio_irq_base = irq_base;
-}
-
-void ll_emma2rh_gpio_irq_enable(int irq)
-{
-	u32 reg;
-
-	db_assert(irq >= 0);
-	db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
-
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
-	reg |= 1 << irq;
-	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
-}
-
-void ll_emma2rh_gpio_irq_disable(int irq)
-{
-	u32 reg;
-
-	db_assert(irq >= 0);
-	db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
-
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
-	reg &= ~(1 << irq);
-	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
-}

arch/mips/include/asm/emma2rh/emma2rh.h → arch/mips/include/asm/emma/emma2rh.h

@@ -1,5 +1,5 @@
 /*
- *  include/asm-mips/emma2rh/emma2rh.h
+ *  arch/mips/include/asm/emma/emma2rh.h
  *      This file is EMMA2RH common header.
  *
  *  Copyright (C) NEC Electronics Corporation 2005-2006
@@ -21,8 +21,8 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_EMMA2RH_EMMA2RH_H
-#define __ASM_EMMA2RH_EMMA2RH_H
+#ifndef __ASM_EMMA_EMMA2RH_H
+#define __ASM_EMMA_EMMA2RH_H
 
 #include <irq.h>
 
@@ -206,7 +206,6 @@ static inline void emma2rh_out32(u32 offset, u32 val)
 static inline u32 emma2rh_in32(u32 offset)
 {
 	u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset);
-	emma2rh_sync();
 	return val;
 }
 
@@ -219,7 +218,6 @@ static inline void emma2rh_out16(u32 offset, u16 val)
 static inline u16 emma2rh_in16(u32 offset)
 {
 	u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset);
-	emma2rh_sync();
 	return val;
 }
 
@@ -232,7 +230,6 @@ static inline void emma2rh_out8(u32 offset, u8 val)
 static inline u8 emma2rh_in8(u32 offset)
 {
 	u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset);
-	emma2rh_sync();
 	return val;
 }
 
@@ -324,10 +321,10 @@ static inline u8 emma2rh_in8(u32 offset)
 /*
  * include the board dependent part
  */
-#if defined(CONFIG_MARKEINS)
-#include <asm/emma2rh/markeins.h>
+#ifdef CONFIG_NEC_MARKEINS
+#include <asm/emma/markeins.h>
 #else
 #error "Unknown EMMA2RH board!"
 #endif
 
-#endif /* __ASM_EMMA2RH_EMMA2RH_H */
+#endif /* __ASM_EMMA_EMMA2RH_H */

arch/mips/include/asm/mach-lemote/pci.h

@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be
+ * useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA
+ * 02139, USA.
+ */
+
+#ifndef _LEMOTE_PCI_H_
+#define _LEMOTE_PCI_H_
+
+#define LOONGSON2E_PCI_MEM_START	0x14000000UL
+#define LOONGSON2E_PCI_MEM_END		0x1fffffffUL
+#define LOONGSON2E_PCI_IO_START		0x00004000UL
+#define LOONGSON2E_IO_PORT_BASE		0x1fd00000UL
+
+#endif /* !_LEMOTE_PCI_H_ */

arch/mips/include/asm/mach-pnx833x/gpio.h

@@ -0,0 +1,172 @@
+/*
+ *  gpio.h: GPIO Support for PNX833X.
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_MIPS_MACH_PNX833X_GPIO_H
+#define __ASM_MIPS_MACH_PNX833X_GPIO_H
+
+/* BIG FAT WARNING: races danger!
+   No protections exist here. Current users are only early init code,
+   when locking is not needed because no cuncurency yet exists there,
+   and GPIO IRQ dispatcher, which does locking.
+   However, if many uses will ever happen, proper locking will be needed
+   - including locking between different uses
+*/
+
+#include "pnx833x.h"
+
+#define SET_REG_BIT(reg, bit)		do { (reg |= (1 << (bit))); } while (0)
+#define CLEAR_REG_BIT(reg, bit)		do { (reg &= ~(1 << (bit))); } while (0)
+
+/* Initialize GPIO to a known state */
+static inline void pnx833x_gpio_init(void)
+{
+	PNX833X_PIO_DIR = 0;
+	PNX833X_PIO_DIR2 = 0;
+	PNX833X_PIO_SEL = 0;
+	PNX833X_PIO_SEL2 = 0;
+	PNX833X_PIO_INT_EDGE = 0;
+	PNX833X_PIO_INT_HI = 0;
+	PNX833X_PIO_INT_LO = 0;
+
+	/* clear any GPIO interrupt requests */
+	PNX833X_PIO_INT_CLEAR = 0xffff;
+	PNX833X_PIO_INT_CLEAR = 0;
+	PNX833X_PIO_INT_ENABLE = 0;
+}
+
+/* Select GPIO direction for a pin */
+static inline void pnx833x_gpio_select_input(unsigned int pin)
+{
+	if (pin < 32)
+		CLEAR_REG_BIT(PNX833X_PIO_DIR, pin);
+	else
+		CLEAR_REG_BIT(PNX833X_PIO_DIR2, pin & 31);
+}
+static inline void pnx833x_gpio_select_output(unsigned int pin)
+{
+	if (pin < 32)
+		SET_REG_BIT(PNX833X_PIO_DIR, pin);
+	else
+		SET_REG_BIT(PNX833X_PIO_DIR2, pin & 31);
+}
+
+/* Select GPIO or alternate function for a pin */
+static inline void pnx833x_gpio_select_function_io(unsigned int pin)
+{
+	if (pin < 32)
+		CLEAR_REG_BIT(PNX833X_PIO_SEL, pin);
+	else
+		CLEAR_REG_BIT(PNX833X_PIO_SEL2, pin & 31);
+}
+static inline void pnx833x_gpio_select_function_alt(unsigned int pin)
+{
+	if (pin < 32)
+		SET_REG_BIT(PNX833X_PIO_SEL, pin);
+	else
+		SET_REG_BIT(PNX833X_PIO_SEL2, pin & 31);
+}
+
+/* Read GPIO pin */
+static inline int pnx833x_gpio_read(unsigned int pin)
+{
+	if (pin < 32)
+		return (PNX833X_PIO_IN >> pin) & 1;
+	else
+		return (PNX833X_PIO_IN2 >> (pin & 31)) & 1;
+}
+
+/* Write GPIO pin */
+static inline void pnx833x_gpio_write(unsigned int val, unsigned int pin)
+{
+	if (pin < 32) {
+		if (val)
+			SET_REG_BIT(PNX833X_PIO_OUT, pin);
+		else
+			CLEAR_REG_BIT(PNX833X_PIO_OUT, pin);
+	} else {
+		if (val)
+			SET_REG_BIT(PNX833X_PIO_OUT2, pin & 31);
+		else
+			CLEAR_REG_BIT(PNX833X_PIO_OUT2, pin & 31);
+	}
+}
+
+/* Configure GPIO interrupt */
+#define GPIO_INT_NONE		0
+#define GPIO_INT_LEVEL_LOW	1
+#define GPIO_INT_LEVEL_HIGH	2
+#define GPIO_INT_EDGE_RISING	3
+#define GPIO_INT_EDGE_FALLING	4
+#define GPIO_INT_EDGE_BOTH	5
+static inline void pnx833x_gpio_setup_irq(int when, unsigned int pin)
+{
+	switch (when) {
+	case GPIO_INT_LEVEL_LOW:
+		CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
+		CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin);
+		SET_REG_BIT(PNX833X_PIO_INT_LO, pin);
+		break;
+	case GPIO_INT_LEVEL_HIGH:
+		CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
+		SET_REG_BIT(PNX833X_PIO_INT_HI, pin);
+		CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin);
+		break;
+	case GPIO_INT_EDGE_RISING:
+		SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
+		SET_REG_BIT(PNX833X_PIO_INT_HI, pin);
+		CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin);
+		break;
+	case GPIO_INT_EDGE_FALLING:
+		SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
+		CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin);
+		SET_REG_BIT(PNX833X_PIO_INT_LO, pin);
+		break;
+	case GPIO_INT_EDGE_BOTH:
+		SET_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
+		SET_REG_BIT(PNX833X_PIO_INT_HI, pin);
+		SET_REG_BIT(PNX833X_PIO_INT_LO, pin);
+		break;
+	default:
+		CLEAR_REG_BIT(PNX833X_PIO_INT_EDGE, pin);
+		CLEAR_REG_BIT(PNX833X_PIO_INT_HI, pin);
+		CLEAR_REG_BIT(PNX833X_PIO_INT_LO, pin);
+		break;
+	}
+}
+
+/* Enable/disable GPIO interrupt */
+static inline void pnx833x_gpio_enable_irq(unsigned int pin)
+{
+	SET_REG_BIT(PNX833X_PIO_INT_ENABLE, pin);
+}
+static inline void pnx833x_gpio_disable_irq(unsigned int pin)
+{
+	CLEAR_REG_BIT(PNX833X_PIO_INT_ENABLE, pin);
+}
+
+/* Clear GPIO interrupt request */
+static inline void pnx833x_gpio_clear_irq(unsigned int pin)
+{
+	SET_REG_BIT(PNX833X_PIO_INT_CLEAR, pin);
+	CLEAR_REG_BIT(PNX833X_PIO_INT_CLEAR, pin);
+}
+
+#endif

arch/mips/include/asm/mach-pnx833x/irq-mapping.h

@@ -0,0 +1,126 @@
+
+/*
+ *  irq.h: IRQ mappings for PNX833X.
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H
+#define __ASM_MIPS_MACH_PNX833X_IRQ_MAPPING_H
+/*
+ * The "IRQ numbers" are completely virtual.
+ *
+ * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48.
+ * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt,
+ * numbers 49..64 for (virtual) GPIO interrupts.
+ *
+ * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57,
+ * connected to PIC, which uses core hardware interrupt 2, and also
+ * a timer interrupt through hardware interrupt 5.
+ * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt,
+ * numbers 65..80 for (virtual) GPIO interrupts.
+ *
+ */
+#include <irq.h>
+
+#define PNX833X_TIMER_IRQ				(MIPS_CPU_IRQ_BASE + 7)
+
+/* Interrupts supported by PIC */
+#define PNX833X_PIC_I2C0_INT			(PNX833X_PIC_IRQ_BASE +  1)
+#define PNX833X_PIC_I2C1_INT			(PNX833X_PIC_IRQ_BASE +  2)
+#define PNX833X_PIC_UART0_INT			(PNX833X_PIC_IRQ_BASE +  3)
+#define PNX833X_PIC_UART1_INT			(PNX833X_PIC_IRQ_BASE +  4)
+#define PNX833X_PIC_TS_IN0_DV_INT		(PNX833X_PIC_IRQ_BASE +  5)
+#define PNX833X_PIC_TS_IN0_DMA_INT		(PNX833X_PIC_IRQ_BASE +  6)
+#define PNX833X_PIC_GPIO_INT			(PNX833X_PIC_IRQ_BASE +  7)
+#define PNX833X_PIC_AUDIO_DEC_INT		(PNX833X_PIC_IRQ_BASE +  8)
+#define PNX833X_PIC_VIDEO_DEC_INT		(PNX833X_PIC_IRQ_BASE +  9)
+#define PNX833X_PIC_CONFIG_INT			(PNX833X_PIC_IRQ_BASE + 10)
+#define PNX833X_PIC_AOI_INT				(PNX833X_PIC_IRQ_BASE + 11)
+#define PNX833X_PIC_SYNC_INT			(PNX833X_PIC_IRQ_BASE + 12)
+#define PNX8330_PIC_SPU_INT				(PNX833X_PIC_IRQ_BASE + 13)
+#define PNX8335_PIC_SATA_INT			(PNX833X_PIC_IRQ_BASE + 13)
+#define PNX833X_PIC_OSD_INT				(PNX833X_PIC_IRQ_BASE + 14)
+#define PNX833X_PIC_DISP1_INT			(PNX833X_PIC_IRQ_BASE + 15)
+#define PNX833X_PIC_DEINTERLACER_INT	(PNX833X_PIC_IRQ_BASE + 16)
+#define PNX833X_PIC_DISPLAY2_INT		(PNX833X_PIC_IRQ_BASE + 17)
+#define PNX833X_PIC_VC_INT				(PNX833X_PIC_IRQ_BASE + 18)
+#define PNX833X_PIC_SC_INT				(PNX833X_PIC_IRQ_BASE + 19)
+#define PNX833X_PIC_IDE_INT				(PNX833X_PIC_IRQ_BASE + 20)
+#define PNX833X_PIC_IDE_DMA_INT			(PNX833X_PIC_IRQ_BASE + 21)
+#define PNX833X_PIC_TS_IN1_DV_INT		(PNX833X_PIC_IRQ_BASE + 22)
+#define PNX833X_PIC_TS_IN1_DMA_INT		(PNX833X_PIC_IRQ_BASE + 23)
+#define PNX833X_PIC_SGDX_DMA_INT		(PNX833X_PIC_IRQ_BASE + 24)
+#define PNX833X_PIC_TS_OUT_INT			(PNX833X_PIC_IRQ_BASE + 25)
+#define PNX833X_PIC_IR_INT				(PNX833X_PIC_IRQ_BASE + 26)
+#define PNX833X_PIC_VMSP1_INT			(PNX833X_PIC_IRQ_BASE + 27)
+#define PNX833X_PIC_VMSP2_INT			(PNX833X_PIC_IRQ_BASE + 28)
+#define PNX833X_PIC_PIBC_INT			(PNX833X_PIC_IRQ_BASE + 29)
+#define PNX833X_PIC_TS_IN0_TRD_INT		(PNX833X_PIC_IRQ_BASE + 30)
+#define PNX833X_PIC_SGDX_TPD_INT		(PNX833X_PIC_IRQ_BASE + 31)
+#define PNX833X_PIC_USB_INT				(PNX833X_PIC_IRQ_BASE + 32)
+#define PNX833X_PIC_TS_IN1_TRD_INT		(PNX833X_PIC_IRQ_BASE + 33)
+#define PNX833X_PIC_CLOCK_INT			(PNX833X_PIC_IRQ_BASE + 34)
+#define PNX833X_PIC_SGDX_PARSER_INT		(PNX833X_PIC_IRQ_BASE + 35)
+#define PNX833X_PIC_VMSP_DMA_INT		(PNX833X_PIC_IRQ_BASE + 36)
+
+#if defined(CONFIG_SOC_PNX8335)
+#define PNX8335_PIC_MIU_INT					(PNX833X_PIC_IRQ_BASE + 37)
+#define PNX8335_PIC_AVCHIP_IRQ_INT			(PNX833X_PIC_IRQ_BASE + 38)
+#define PNX8335_PIC_SYNC_HD_INT				(PNX833X_PIC_IRQ_BASE + 39)
+#define PNX8335_PIC_DISP_HD_INT				(PNX833X_PIC_IRQ_BASE + 40)
+#define PNX8335_PIC_DISP_SCALER_INT			(PNX833X_PIC_IRQ_BASE + 41)
+#define PNX8335_PIC_OSD_HD1_INT				(PNX833X_PIC_IRQ_BASE + 42)
+#define PNX8335_PIC_DTL_WRITER_Y_INT		(PNX833X_PIC_IRQ_BASE + 43)
+#define PNX8335_PIC_DTL_WRITER_C_INT		(PNX833X_PIC_IRQ_BASE + 44)
+#define PNX8335_PIC_DTL_EMULATOR_Y_IR_INT	(PNX833X_PIC_IRQ_BASE + 45)
+#define PNX8335_PIC_DTL_EMULATOR_C_IR_INT	(PNX833X_PIC_IRQ_BASE + 46)
+#define PNX8335_PIC_DENC_TTX_INT			(PNX833X_PIC_IRQ_BASE + 47)
+#define PNX8335_PIC_MMI_SIF0_INT			(PNX833X_PIC_IRQ_BASE + 48)
+#define PNX8335_PIC_MMI_SIF1_INT			(PNX833X_PIC_IRQ_BASE + 49)
+#define PNX8335_PIC_MMI_CDMMU_INT			(PNX833X_PIC_IRQ_BASE + 50)
+#define PNX8335_PIC_PIBCS_INT				(PNX833X_PIC_IRQ_BASE + 51)
+#define PNX8335_PIC_ETHERNET_INT			(PNX833X_PIC_IRQ_BASE + 52)
+#define PNX8335_PIC_VMSP1_0_INT				(PNX833X_PIC_IRQ_BASE + 53)
+#define PNX8335_PIC_VMSP1_1_INT				(PNX833X_PIC_IRQ_BASE + 54)
+#define PNX8335_PIC_VMSP1_DMA_INT			(PNX833X_PIC_IRQ_BASE + 55)
+#define PNX8335_PIC_TDGR_DE_INT				(PNX833X_PIC_IRQ_BASE + 56)
+#define PNX8335_PIC_IR1_IRQ_INT				(PNX833X_PIC_IRQ_BASE + 57)
+#endif
+
+/* GPIO interrupts */
+#define PNX833X_GPIO_0_INT			(PNX833X_GPIO_IRQ_BASE +  0)
+#define PNX833X_GPIO_1_INT			(PNX833X_GPIO_IRQ_BASE +  1)
+#define PNX833X_GPIO_2_INT			(PNX833X_GPIO_IRQ_BASE +  2)
+#define PNX833X_GPIO_3_INT			(PNX833X_GPIO_IRQ_BASE +  3)
+#define PNX833X_GPIO_4_INT			(PNX833X_GPIO_IRQ_BASE +  4)
+#define PNX833X_GPIO_5_INT			(PNX833X_GPIO_IRQ_BASE +  5)
+#define PNX833X_GPIO_6_INT			(PNX833X_GPIO_IRQ_BASE +  6)
+#define PNX833X_GPIO_7_INT			(PNX833X_GPIO_IRQ_BASE +  7)
+#define PNX833X_GPIO_8_INT			(PNX833X_GPIO_IRQ_BASE +  8)
+#define PNX833X_GPIO_9_INT			(PNX833X_GPIO_IRQ_BASE +  9)
+#define PNX833X_GPIO_10_INT			(PNX833X_GPIO_IRQ_BASE + 10)
+#define PNX833X_GPIO_11_INT			(PNX833X_GPIO_IRQ_BASE + 11)
+#define PNX833X_GPIO_12_INT			(PNX833X_GPIO_IRQ_BASE + 12)
+#define PNX833X_GPIO_13_INT			(PNX833X_GPIO_IRQ_BASE + 13)
+#define PNX833X_GPIO_14_INT			(PNX833X_GPIO_IRQ_BASE + 14)
+#define PNX833X_GPIO_15_INT			(PNX833X_GPIO_IRQ_BASE + 15)
+
+#endif
+

arch/mips/include/asm/mach-pnx833x/irq.h

@@ -0,0 +1,53 @@
+/*
+ *  irq.h: IRQ mappings for PNX833X.
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_MIPS_MACH_PNX833X_IRQ_H
+#define __ASM_MIPS_MACH_PNX833X_IRQ_H
+/*
+ * The "IRQ numbers" are completely virtual.
+ *
+ * In PNX8330/1, we have 48 interrupt lines, numbered from 1 to 48.
+ * Let's use numbers 1..48 for PIC interrupts, number 0 for timer interrupt,
+ * numbers 49..64 for (virtual) GPIO interrupts.
+ *
+ * In PNX8335, we have 57 interrupt lines, numbered from 1 to 57,
+ * connected to PIC, which uses core hardware interrupt 2, and also
+ * a timer interrupt through hardware interrupt 5.
+ * Let's use numbers 1..64 for PIC interrupts, number 0 for timer interrupt,
+ * numbers 65..80 for (virtual) GPIO interrupts.
+ *
+ */
+#if defined(CONFIG_SOC_PNX8335)
+	#define PNX833X_PIC_NUM_IRQ			58
+#else
+	#define PNX833X_PIC_NUM_IRQ			37
+#endif
+
+#define MIPS_CPU_NUM_IRQ				8
+#define PNX833X_GPIO_NUM_IRQ			16
+
+#define MIPS_CPU_IRQ_BASE				0
+#define PNX833X_PIC_IRQ_BASE			(MIPS_CPU_IRQ_BASE + MIPS_CPU_NUM_IRQ)
+#define PNX833X_GPIO_IRQ_BASE			(PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ)
+#define NR_IRQS							(MIPS_CPU_NUM_IRQ + PNX833X_PIC_NUM_IRQ + PNX833X_GPIO_NUM_IRQ)
+
+#endif

arch/mips/include/asm/mach-pnx833x/pnx833x.h

@@ -0,0 +1,202 @@
+/*
+ *  pnx833x.h: Register mappings for PNX833X.
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_MIPS_MACH_PNX833X_PNX833X_H
+#define __ASM_MIPS_MACH_PNX833X_PNX833X_H
+
+/* All regs are accessed in KSEG1 */
+#define PNX833X_BASE		(0xa0000000ul + 0x17E00000ul)
+
+#define PNX833X_REG(offs)	(*((volatile unsigned long *)(PNX833X_BASE + offs)))
+
+/* Registers are named exactly as in PNX833X docs, just with PNX833X_ prefix */
+
+/* Read access to multibit fields */
+#define PNX833X_BIT(val, reg, field)	((val) & PNX833X_##reg##_##field)
+#define PNX833X_REGBIT(reg, field)	PNX833X_BIT(PNX833X_##reg, reg, field)
+
+/* Use PNX833X_FIELD to extract a field from val */
+#define PNX_FIELD(cpu, val, reg, field) \
+		(((val) & PNX##cpu##_##reg##_##field##_MASK) >> \
+			PNX##cpu##_##reg##_##field##_SHIFT)
+#define PNX833X_FIELD(val, reg, field)	PNX_FIELD(833X, val, reg, field)
+#define PNX8330_FIELD(val, reg, field)	PNX_FIELD(8330, val, reg, field)
+#define PNX8335_FIELD(val, reg, field)	PNX_FIELD(8335, val, reg, field)
+
+/* Use PNX833X_REGFIELD to extract a field from a register */
+#define PNX833X_REGFIELD(reg, field)	PNX833X_FIELD(PNX833X_##reg, reg, field)
+#define PNX8330_REGFIELD(reg, field)	PNX8330_FIELD(PNX8330_##reg, reg, field)
+#define PNX8335_REGFIELD(reg, field)	PNX8335_FIELD(PNX8335_##reg, reg, field)
+
+
+#define PNX_WRITEFIELD(cpu, val, reg, field) \
+	(PNX##cpu##_##reg = (PNX##cpu##_##reg & ~(PNX##cpu##_##reg##_##field##_MASK)) | \
+						((val) << PNX##cpu##_##reg##_##field##_SHIFT))
+#define PNX833X_WRITEFIELD(val, reg, field) \
+					PNX_WRITEFIELD(833X, val, reg, field)
+#define PNX8330_WRITEFIELD(val, reg, field) \
+					PNX_WRITEFIELD(8330, val, reg, field)
+#define PNX8335_WRITEFIELD(val, reg, field) \
+					PNX_WRITEFIELD(8335, val, reg, field)
+
+
+/* Macros to detect CPU type */
+
+#define PNX833X_CONFIG_MODULE_ID		PNX833X_REG(0x7FFC)
+#define PNX833X_CONFIG_MODULE_ID_MAJREV_MASK	0x0000f000
+#define PNX833X_CONFIG_MODULE_ID_MAJREV_SHIFT	12
+#define PNX8330_CONFIG_MODULE_MAJREV		4
+#define PNX8335_CONFIG_MODULE_MAJREV		5
+#define CPU_IS_PNX8330	(PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \
+					PNX8330_CONFIG_MODULE_MAJREV)
+#define CPU_IS_PNX8335	(PNX833X_REGFIELD(CONFIG_MODULE_ID, MAJREV) == \
+					PNX8335_CONFIG_MODULE_MAJREV)
+
+
+
+#define PNX833X_RESET_CONTROL		PNX833X_REG(0x8004)
+#define PNX833X_RESET_CONTROL_2 	PNX833X_REG(0x8014)
+
+#define PNX833X_PIC_REG(offs)		PNX833X_REG(0x01000 + (offs))
+#define PNX833X_PIC_INT_PRIORITY	PNX833X_PIC_REG(0x0)
+#define PNX833X_PIC_INT_SRC		PNX833X_PIC_REG(0x4)
+#define PNX833X_PIC_INT_SRC_INT_SRC_MASK	0x00000FF8ul	/* bits 11:3 */
+#define PNX833X_PIC_INT_SRC_INT_SRC_SHIFT	3
+#define PNX833X_PIC_INT_REG(irq)	PNX833X_PIC_REG(0x10 + 4*(irq))
+
+#define PNX833X_CLOCK_CPUCP_CTL	PNX833X_REG(0x9228)
+#define PNX833X_CLOCK_CPUCP_CTL_EXIT_RESET	0x00000002ul	/* bit 1 */
+#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_MASK	0x00000018ul	/* bits 4:3 */
+#define PNX833X_CLOCK_CPUCP_CTL_DIV_CLOCK_SHIFT	3
+
+#define PNX8335_CLOCK_PLL_CPU_CTL		PNX833X_REG(0x9020)
+#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_MASK	0x1f
+#define PNX8335_CLOCK_PLL_CPU_CTL_FREQ_SHIFT	0
+
+#define PNX833X_CONFIG_MUX		PNX833X_REG(0x7004)
+#define PNX833X_CONFIG_MUX_IDE_MUX	0x00000080		/* bit 7 */
+
+#define PNX8330_CONFIG_POLYFUSE_7	PNX833X_REG(0x7040)
+#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_MASK	0x00180000
+#define PNX8330_CONFIG_POLYFUSE_7_BOOT_MODE_SHIFT	19
+
+#define PNX833X_PIO_IN		PNX833X_REG(0xF000)
+#define PNX833X_PIO_OUT		PNX833X_REG(0xF004)
+#define PNX833X_PIO_DIR		PNX833X_REG(0xF008)
+#define PNX833X_PIO_SEL		PNX833X_REG(0xF014)
+#define PNX833X_PIO_INT_EDGE	PNX833X_REG(0xF020)
+#define PNX833X_PIO_INT_HI	PNX833X_REG(0xF024)
+#define PNX833X_PIO_INT_LO	PNX833X_REG(0xF028)
+#define PNX833X_PIO_INT_STATUS	PNX833X_REG(0xFFE0)
+#define PNX833X_PIO_INT_ENABLE	PNX833X_REG(0xFFE4)
+#define PNX833X_PIO_INT_CLEAR	PNX833X_REG(0xFFE8)
+#define PNX833X_PIO_IN2		PNX833X_REG(0xF05C)
+#define PNX833X_PIO_OUT2	PNX833X_REG(0xF060)
+#define PNX833X_PIO_DIR2	PNX833X_REG(0xF064)
+#define PNX833X_PIO_SEL2	PNX833X_REG(0xF068)
+
+#define PNX833X_UART0_PORTS_START	(PNX833X_BASE + 0xB000)
+#define PNX833X_UART0_PORTS_END		(PNX833X_BASE + 0xBFFF)
+#define PNX833X_UART1_PORTS_START	(PNX833X_BASE + 0xC000)
+#define PNX833X_UART1_PORTS_END		(PNX833X_BASE + 0xCFFF)
+
+#define PNX833X_USB_PORTS_START		(PNX833X_BASE + 0x19000)
+#define PNX833X_USB_PORTS_END		(PNX833X_BASE + 0x19FFF)
+
+#define PNX833X_CONFIG_USB		PNX833X_REG(0x7008)
+
+#define PNX833X_I2C0_PORTS_START	(PNX833X_BASE + 0xD000)
+#define PNX833X_I2C0_PORTS_END		(PNX833X_BASE + 0xDFFF)
+#define PNX833X_I2C1_PORTS_START	(PNX833X_BASE + 0xE000)
+#define PNX833X_I2C1_PORTS_END		(PNX833X_BASE + 0xEFFF)
+
+#define PNX833X_IDE_PORTS_START		(PNX833X_BASE + 0x1A000)
+#define PNX833X_IDE_PORTS_END		(PNX833X_BASE + 0x1AFFF)
+#define PNX833X_IDE_MODULE_ID		PNX833X_REG(0x1AFFC)
+
+#define PNX833X_IDE_MODULE_ID_MODULE_ID_MASK	0xFFFF0000
+#define PNX833X_IDE_MODULE_ID_MODULE_ID_SHIFT	16
+#define PNX833X_IDE_MODULE_ID_VALUE		0xA009
+
+
+#define PNX833X_MIU_SEL0			PNX833X_REG(0x2004)
+#define PNX833X_MIU_SEL0_TIMING		PNX833X_REG(0x2008)
+#define PNX833X_MIU_SEL1			PNX833X_REG(0x200C)
+#define PNX833X_MIU_SEL1_TIMING		PNX833X_REG(0x2010)
+#define PNX833X_MIU_SEL2			PNX833X_REG(0x2014)
+#define PNX833X_MIU_SEL2_TIMING		PNX833X_REG(0x2018)
+#define PNX833X_MIU_SEL3			PNX833X_REG(0x201C)
+#define PNX833X_MIU_SEL3_TIMING		PNX833X_REG(0x2020)
+
+#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_MASK	(1 << 14)
+#define PNX833X_MIU_SEL0_SPI_MODE_ENABLE_SHIFT	14
+
+#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_MASK	(1 << 7)
+#define PNX833X_MIU_SEL0_BURST_MODE_ENABLE_SHIFT	7
+
+#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_MASK	(0xF << 9)
+#define PNX833X_MIU_SEL0_BURST_PAGE_LEN_SHIFT	9
+
+#define PNX833X_MIU_CONFIG_SPI		PNX833X_REG(0x2000)
+
+#define PNX833X_MIU_CONFIG_SPI_OPCODE_MASK	(0xFF << 3)
+#define PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT	3
+
+#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_MASK	(1 << 2)
+#define PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT	2
+
+#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_MASK	(1 << 1)
+#define PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT	1
+
+#define PNX833X_MIU_CONFIG_SPI_SYNC_MASK	(1 << 0)
+#define PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT	0
+
+#define PNX833X_WRITE_CONFIG_SPI(opcode, data_enable, addr_enable, sync) \
+   (PNX833X_MIU_CONFIG_SPI =						\
+    ((opcode) << PNX833X_MIU_CONFIG_SPI_OPCODE_SHIFT) |			\
+    ((data_enable) << PNX833X_MIU_CONFIG_SPI_DATA_ENABLE_SHIFT) |	\
+    ((addr_enable) << PNX833X_MIU_CONFIG_SPI_ADDR_ENABLE_SHIFT) |	\
+    ((sync) << PNX833X_MIU_CONFIG_SPI_SYNC_SHIFT))
+
+#define PNX8335_IP3902_PORTS_START		(PNX833X_BASE + 0x2F000)
+#define PNX8335_IP3902_PORTS_END		(PNX833X_BASE + 0x2FFFF)
+#define PNX8335_IP3902_MODULE_ID		PNX833X_REG(0x2FFFC)
+
+#define PNX8335_IP3902_MODULE_ID_MODULE_ID_MASK		0xFFFF0000
+#define PNX8335_IP3902_MODULE_ID_MODULE_ID_SHIFT	16
+#define PNX8335_IP3902_MODULE_ID_VALUE			0x3902
+
+ /* I/O location(gets remapped)*/
+#define PNX8335_NAND_BASE	    0x18000000
+/* I/O location with CLE high */
+#define PNX8335_NAND_CLE_MASK	0x00100000
+/* I/O location with ALE high */
+#define PNX8335_NAND_ALE_MASK	0x00010000
+
+#define PNX8335_SATA_PORTS_START	(PNX833X_BASE + 0x2E000)
+#define PNX8335_SATA_PORTS_END		(PNX833X_BASE + 0x2EFFF)
+#define PNX8335_SATA_MODULE_ID		PNX833X_REG(0x2EFFC)
+
+#define PNX8335_SATA_MODULE_ID_MODULE_ID_MASK	0xFFFF0000
+#define PNX8335_SATA_MODULE_ID_MODULE_ID_SHIFT	16
+#define PNX8335_SATA_MODULE_ID_VALUE		0xA099
+
+#endif

arch/mips/include/asm/mach-pnx833x/war.h

@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_MIPS_MACH_PNX833X_WAR_H
+#define __ASM_MIPS_MACH_PNX833X_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_PNX8550_WAR_H */

arch/mips/include/asm/mach-tx49xx/mangle-port.h

@@ -0,0 +1,26 @@
+#ifndef __ASM_MACH_TX49XX_MANGLE_PORT_H
+#define __ASM_MACH_TX49XX_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port)	(port)
+#define __swizzle_addr_w(port)	(port)
+#define __swizzle_addr_l(port)	(port)
+#define __swizzle_addr_q(port)	(port)
+
+#define ioswabb(a, x)		(x)
+#define __mem_ioswabb(a, x)	(x)
+#if defined(CONFIG_TOSHIBA_RBTX4939) && \
+	(defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)) && \
+	defined(__BIG_ENDIAN)
+#define NEEDS_TXX9_IOSWABW
+extern u16 (*ioswabw)(volatile u16 *a, u16 x);
+extern u16 (*__mem_ioswabw)(volatile u16 *a, u16 x);
+#else
+#define ioswabw(a, x)		le16_to_cpu(x)
+#define __mem_ioswabw(a, x)	(x)
+#endif
+#define ioswabl(a, x)		le32_to_cpu(x)
+#define __mem_ioswabl(a, x)	(x)
+#define ioswabq(a, x)		le64_to_cpu(x)
+#define __mem_ioswabq(a, x)	(x)
+
+#endif /* __ASM_MACH_TX49XX_MANGLE_PORT_H */

arch/mips/include/asm/mipsregs.h

@@ -192,6 +192,7 @@
 #define PM_16M		0x01ffe000
 #define PM_64M		0x07ffe000
 #define PM_256M		0x1fffe000
+#define PM_1G		0x7fffe000
 
 #endif
 

arch/mips/include/asm/module.h

@@ -98,6 +98,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "R5000 "
 #elif defined CONFIG_CPU_R5432
 #define MODULE_PROC_FAMILY "R5432 "
+#elif defined CONFIG_CPU_R5500
+#define MODULE_PROC_FAMILY "R5500 "
 #elif defined CONFIG_CPU_R6000
 #define MODULE_PROC_FAMILY "R6000 "
 #elif defined CONFIG_CPU_NEVADA

arch/mips/include/asm/ptrace.h

@@ -80,25 +80,25 @@ enum pt_watch_style {
 	pt_watch_style_mips64
 };
 struct mips32_watch_regs {
-	uint32_t watchlo[8];
+	unsigned int watchlo[8];
 	/* Lower 16 bits of watchhi. */
-	uint16_t watchhi[8];
+	unsigned short watchhi[8];
 	/* Valid mask and I R W bits.
 	 * bit 0 -- 1 if W bit is usable.
 	 * bit 1 -- 1 if R bit is usable.
 	 * bit 2 -- 1 if I bit is usable.
 	 * bits 3 - 11 -- Valid watchhi mask bits.
 	 */
-	uint16_t watch_masks[8];
+	unsigned short watch_masks[8];
 	/* The number of valid watch register pairs.  */
-	uint32_t num_valid;
+	unsigned int num_valid;
 } __attribute__((aligned(8)));
 
 struct mips64_watch_regs {
-	uint64_t watchlo[8];
-	uint16_t watchhi[8];
-	uint16_t watch_masks[8];
-	uint32_t num_valid;
+	unsigned long long watchlo[8];
+	unsigned short watchhi[8];
+	unsigned short watch_masks[8];
+	unsigned int num_valid;
 } __attribute__((aligned(8)));
 
 struct pt_watch_regs {
@@ -116,6 +116,7 @@ struct pt_watch_regs {
 
 #include <linux/compiler.h>
 #include <linux/linkage.h>
+#include <linux/types.h>
 #include <asm/isadep.h>
 
 struct task_struct;

arch/mips/include/asm/txx9/generic.h

@@ -86,4 +86,9 @@ void txx9_iocled_init(unsigned long baseaddr,
 		      int basenum, unsigned int num, int lowactive,
 		      const char *color, char **deftriggers);
 
+/* 7SEG LED */
+void txx9_7segled_init(unsigned int num,
+		       void (*putc)(unsigned int pos, unsigned char val));
+int txx9_7segled_putc(unsigned int pos, char c);
+
 #endif /* __ASM_TXX9_GENERIC_H */

arch/mips/kernel/Makefile

@@ -33,6 +33,7 @@ obj-$(CONFIG_CPU_R4X00)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R5000)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R5432)		+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_R5500)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R8000)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_RM7000)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_RM9000)	+= r4k_fpu.o r4k_switch.o

arch/mips/kernel/scall32-o32.S

@@ -180,7 +180,7 @@ bad_stack:
 	 * The system call does not exist in this kernel
 	 */
 illegal_syscall:
-	li	v0, -ENOSYS			# error
+	li	v0, ENOSYS			# error
 	sw	v0, PT_R2(sp)
 	li	t0, 1				# set error flag
 	sw	t0, PT_R7(sp)
@@ -293,7 +293,7 @@ bad_alignment:
 	jr	t2
 	/* Unreached */
 
-einval:	li	v0, -EINVAL
+einval:	li	v0, -ENOSYS
 	jr	ra
 	END(sys_syscall)
 

arch/mips/kernel/scall64-64.S

@@ -117,7 +117,7 @@ syscall_trace_entry:
 
 illegal_syscall:
 	/* This also isn't a 64-bit syscall, throw an error.  */
-	li	v0, -ENOSYS			# error
+	li	v0, ENOSYS			# error
 	sd	v0, PT_R2(sp)
 	li	t0, 1				# set error flag
 	sd	t0, PT_R7(sp)

arch/mips/kernel/setup.c

@@ -601,8 +601,8 @@ static int __init debugfs_mips(void)
 	struct dentry *d;
 
 	d = debugfs_create_dir("mips", NULL);
-	if (IS_ERR(d))
-		return PTR_ERR(d);
+	if (!d)
+		return -ENOMEM;
 	mips_debugfs_dir = d;
 	return 0;
 }

arch/mips/kernel/smp.c

@@ -163,8 +163,10 @@ static void stop_this_cpu(void *dummy)
 	 * Remove this CPU:
 	 */
 	cpu_clear(smp_processor_id(), cpu_online_map);
-	local_irq_enable();	/* May need to service _machine_restart IPI */
-	for (;;);		/* Wait if available. */
+	for (;;) {
+		if (cpu_wait)
+			(*cpu_wait)();		/* Wait if available. */
+	}
 }
 
 void smp_send_stop(void)

arch/mips/kernel/unaligned.c

@@ -560,12 +560,12 @@ static int __init debugfs_unaligned(void)
 		return -ENODEV;
 	d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
 			       mips_debugfs_dir, &unaligned_instructions);
-	if (IS_ERR(d))
-		return PTR_ERR(d);
+	if (!d)
+		return -ENOMEM;
 	d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
 			       mips_debugfs_dir, &unaligned_action);
-	if (IS_ERR(d))
-		return PTR_ERR(d);
+	if (!d)
+		return -ENOMEM;
 	return 0;
 }
 __initcall(debugfs_unaligned);

arch/mips/lemote/lm2e/pci.c

@@ -30,19 +30,20 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/mips-boards/bonito64.h>
+#include <asm/mach-lemote/pci.h>
 
 extern struct pci_ops bonito64_pci_ops;
 
 static struct resource loongson2e_pci_mem_resource = {
 	.name   = "LOONGSON2E PCI MEM",
-	.start  = 0x14000000UL,
-	.end    = 0x1fffffffUL,
+	.start  = LOONGSON2E_PCI_MEM_START,
+	.end    = LOONGSON2E_PCI_MEM_END,
 	.flags  = IORESOURCE_MEM,
 };
 
 static struct resource loongson2e_pci_io_resource = {
 	.name   = "LOONGSON2E PCI IO MEM",
-	.start  = 0x00004000UL,
+	.start  = LOONGSON2E_PCI_IO_START,
 	.end    = IO_SPACE_LIMIT,
 	.flags  = IORESOURCE_IO,
 };
@@ -82,6 +83,12 @@ static void __init ict_pcimap(void)
 static int __init pcibios_init(void)
 {
 	ict_pcimap();
+
+	loongson2e_pci_controller.io_map_base =
+	    (unsigned long) ioremap(LOONGSON2E_IO_PORT_BASE,
+				    loongson2e_pci_io_resource.end -
+				    loongson2e_pci_io_resource.start + 1);
+
 	register_pci_controller(&loongson2e_pci_controller);
 
 	return 0;

arch/mips/lemote/lm2e/setup.c

@@ -34,6 +34,7 @@
 #include <asm/mc146818-time.h>
 #include <asm/time.h>
 #include <asm/wbflush.h>
+#include <asm/mach-lemote/pci.h>
 
 #ifdef CONFIG_VT
 #include <linux/console.h>
@@ -42,12 +43,6 @@
 
 extern void mips_reboot_setup(void);
 
-#ifdef CONFIG_64BIT
-#define PTR_PAD(p) ((0xffffffff00000000)|((unsigned long long)(p)))
-#else
-#define PTR_PAD(p) (p)
-#endif
-
 unsigned long cpu_clock_freq;
 unsigned long bus_clock;
 unsigned int memsize;
@@ -80,8 +75,8 @@ static void wbflush_loongson2e(void)
 
 void __init plat_mem_setup(void)
 {
-	set_io_port_base(PTR_PAD(0xbfd00000));
-
+	set_io_port_base((unsigned long)ioremap(LOONGSON2E_IO_PORT_BASE,
+				IO_SPACE_LIMIT - LOONGSON2E_PCI_IO_START + 1));
 	mips_reboot_setup();
 
 	__wbflush = wbflush_loongson2e;

arch/mips/lib/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_CPU_R4300)		+= dump_tlb.o
 obj-$(CONFIG_CPU_R4X00)		+= dump_tlb.o
 obj-$(CONFIG_CPU_R5000)		+= dump_tlb.o
 obj-$(CONFIG_CPU_R5432)		+= dump_tlb.o
+obj-$(CONFIG_CPU_R5500)		+= dump_tlb.o
 obj-$(CONFIG_CPU_R6000)		+=
 obj-$(CONFIG_CPU_R8000)		+=
 obj-$(CONFIG_CPU_RM7000)	+= dump_tlb.o

arch/mips/lib/dump_tlb.c

@@ -25,6 +25,7 @@ static inline const char *msk2str(unsigned int mask)
 	case PM_16M:	return "16Mb";
 	case PM_64M:	return "64Mb";
 	case PM_256M:	return "256Mb";
+	case PM_1G:	return "1Gb";
 #endif
 	}
 	return "";

arch/mips/math-emu/cp1emu.c

@@ -1299,12 +1299,12 @@ static int __init debugfs_fpuemu(void)
 	if (!mips_debugfs_dir)
 		return -ENODEV;
 	dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir);
-	if (IS_ERR(dir))
-		return PTR_ERR(dir);
+	if (!dir)
+		return -ENOMEM;
 	for (i = 0; i < ARRAY_SIZE(vars); i++) {
 		d = debugfs_create_u32(vars[i].name, S_IRUGO, dir, vars[i].v);
-		if (IS_ERR(d))
-			return PTR_ERR(d);
+		if (!d)
+			return -ENOMEM;
 	}
 	return 0;
 }

arch/mips/mm/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_CPU_R4300)		+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R4X00)		+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R5000)		+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R5432)		+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_R5500)		+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R8000)		+= c-r4k.o cex-gen.o tlb-r8k.o
 obj-$(CONFIG_CPU_RM7000)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_RM9000)	+= c-r4k.o cex-gen.o tlb-r4k.o

arch/mips/mm/dma-default.c

@@ -324,7 +324,6 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
 		if (cpu_is_noncoherent_r10000(dev))
 			__dma_sync((unsigned long)page_address(sg_page(sg)),
 			           sg->length, direction);
-		plat_unmap_dma_mem(sg->dma_address);
 	}
 }
 
@@ -342,7 +341,6 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 		if (!plat_device_is_coherent(dev))
 			__dma_sync((unsigned long)page_address(sg_page(sg)),
 			           sg->length, direction);
-		plat_unmap_dma_mem(sg->dma_address);
 	}
 }
 

arch/mips/nxp/pnx833x/common/Makefile

@@ -0,0 +1,3 @@
+obj-y := interrupts.o platform.o prom.o setup.o reset.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/nxp/pnx833x/common/interrupts.c

@@ -0,0 +1,380 @@
+/*
+ *  interrupts.c: Interrupt mappings for PNX833X.
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/hardirq.h>
+#include <linux/interrupt.h>
+#include <asm/mipsregs.h>
+#include <asm/irq_cpu.h>
+#include <irq.h>
+#include <irq-mapping.h>
+#include <gpio.h>
+
+static int mips_cpu_timer_irq;
+
+static const unsigned int irq_prio[PNX833X_PIC_NUM_IRQ] =
+{
+    0, /* unused */
+    4, /* PNX833X_PIC_I2C0_INT                 1 */
+    4, /* PNX833X_PIC_I2C1_INT                 2 */
+    1, /* PNX833X_PIC_UART0_INT                3 */
+    1, /* PNX833X_PIC_UART1_INT                4 */
+    6, /* PNX833X_PIC_TS_IN0_DV_INT            5 */
+    6, /* PNX833X_PIC_TS_IN0_DMA_INT           6 */
+    7, /* PNX833X_PIC_GPIO_INT                 7 */
+    4, /* PNX833X_PIC_AUDIO_DEC_INT            8 */
+    5, /* PNX833X_PIC_VIDEO_DEC_INT            9 */
+    4, /* PNX833X_PIC_CONFIG_INT              10 */
+    4, /* PNX833X_PIC_AOI_INT                 11 */
+    9, /* PNX833X_PIC_SYNC_INT                12 */
+    9, /* PNX8335_PIC_SATA_INT                13 */
+    4, /* PNX833X_PIC_OSD_INT                 14 */
+    9, /* PNX833X_PIC_DISP1_INT               15 */
+    4, /* PNX833X_PIC_DEINTERLACER_INT        16 */
+    9, /* PNX833X_PIC_DISPLAY2_INT            17 */
+    4, /* PNX833X_PIC_VC_INT                  18 */
+    4, /* PNX833X_PIC_SC_INT                  19 */
+    9, /* PNX833X_PIC_IDE_INT                 20 */
+    9, /* PNX833X_PIC_IDE_DMA_INT             21 */
+    6, /* PNX833X_PIC_TS_IN1_DV_INT           22 */
+    6, /* PNX833X_PIC_TS_IN1_DMA_INT          23 */
+    4, /* PNX833X_PIC_SGDX_DMA_INT            24 */
+    4, /* PNX833X_PIC_TS_OUT_INT              25 */
+    4, /* PNX833X_PIC_IR_INT                  26 */
+    3, /* PNX833X_PIC_VMSP1_INT               27 */
+    3, /* PNX833X_PIC_VMSP2_INT               28 */
+    4, /* PNX833X_PIC_PIBC_INT                29 */
+    4, /* PNX833X_PIC_TS_IN0_TRD_INT          30 */
+    4, /* PNX833X_PIC_SGDX_TPD_INT            31 */
+    5, /* PNX833X_PIC_USB_INT                 32 */
+    4, /* PNX833X_PIC_TS_IN1_TRD_INT          33 */
+    4, /* PNX833X_PIC_CLOCK_INT               34 */
+    4, /* PNX833X_PIC_SGDX_PARSER_INT         35 */
+    4, /* PNX833X_PIC_VMSP_DMA_INT            36 */
+#if defined(CONFIG_SOC_PNX8335)
+    4, /* PNX8335_PIC_MIU_INT                 37 */
+    4, /* PNX8335_PIC_AVCHIP_IRQ_INT          38 */
+    9, /* PNX8335_PIC_SYNC_HD_INT             39 */
+    9, /* PNX8335_PIC_DISP_HD_INT             40 */
+    9, /* PNX8335_PIC_DISP_SCALER_INT         41 */
+    4, /* PNX8335_PIC_OSD_HD1_INT             42 */
+    4, /* PNX8335_PIC_DTL_WRITER_Y_INT        43 */
+    4, /* PNX8335_PIC_DTL_WRITER_C_INT        44 */
+    4, /* PNX8335_PIC_DTL_EMULATOR_Y_IR_INT   45 */
+    4, /* PNX8335_PIC_DTL_EMULATOR_C_IR_INT   46 */
+    4, /* PNX8335_PIC_DENC_TTX_INT            47 */
+    4, /* PNX8335_PIC_MMI_SIF0_INT            48 */
+    4, /* PNX8335_PIC_MMI_SIF1_INT            49 */
+    4, /* PNX8335_PIC_MMI_CDMMU_INT           50 */
+    4, /* PNX8335_PIC_PIBCS_INT               51 */
+   12, /* PNX8335_PIC_ETHERNET_INT            52 */
+    3, /* PNX8335_PIC_VMSP1_0_INT             53 */
+    3, /* PNX8335_PIC_VMSP1_1_INT             54 */
+    4, /* PNX8335_PIC_VMSP1_DMA_INT           55 */
+    4, /* PNX8335_PIC_TDGR_DE_INT             56 */
+    4, /* PNX8335_PIC_IR1_IRQ_INT             57 */
+#endif
+};
+
+static void pnx833x_timer_dispatch(void)
+{
+	do_IRQ(mips_cpu_timer_irq);
+}
+
+static void pic_dispatch(void)
+{
+	unsigned int irq = PNX833X_REGFIELD(PIC_INT_SRC, INT_SRC);
+
+	if ((irq >= 1) && (irq < (PNX833X_PIC_NUM_IRQ))) {
+		unsigned long priority = PNX833X_PIC_INT_PRIORITY;
+		PNX833X_PIC_INT_PRIORITY = irq_prio[irq];
+
+		if (irq == PNX833X_PIC_GPIO_INT) {
+			unsigned long mask = PNX833X_PIO_INT_STATUS & PNX833X_PIO_INT_ENABLE;
+			int pin;
+			while ((pin = ffs(mask & 0xffff))) {
+				pin -= 1;
+				do_IRQ(PNX833X_GPIO_IRQ_BASE + pin);
+				mask &= ~(1 << pin);
+			}
+		} else {
+			do_IRQ(irq + PNX833X_PIC_IRQ_BASE);
+		}
+
+		PNX833X_PIC_INT_PRIORITY = priority;
+	} else {
+		printk(KERN_ERR "plat_irq_dispatch: unexpected irq %u\n", irq);
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & STATUSF_IP4)
+		pic_dispatch();
+	else if (pending & STATUSF_IP7)
+		do_IRQ(PNX833X_TIMER_IRQ);
+	else
+		spurious_interrupt();
+}
+
+static inline void pnx833x_hard_enable_pic_irq(unsigned int irq)
+{
+	/* Currently we do this by setting IRQ priority to 1.
+	   If priority support is being implemented, 1 should be repalced
+		by a better value. */
+	PNX833X_PIC_INT_REG(irq) = irq_prio[irq];
+}
+
+static inline void pnx833x_hard_disable_pic_irq(unsigned int irq)
+{
+	/* Disable IRQ by writing setting it's priority to 0 */
+	PNX833X_PIC_INT_REG(irq) = 0;
+}
+
+static int irqflags[PNX833X_PIC_NUM_IRQ];	/* initialized by zeroes */
+#define IRQFLAG_STARTED		1
+#define IRQFLAG_DISABLED	2
+
+static DEFINE_SPINLOCK(pnx833x_irq_lock);
+
+static unsigned int pnx833x_startup_pic_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
+
+	spin_lock_irqsave(&pnx833x_irq_lock, flags);
+
+	irqflags[pic_irq] = IRQFLAG_STARTED;	/* started, not disabled */
+	pnx833x_hard_enable_pic_irq(pic_irq);
+
+	spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+	return 0;
+}
+
+static void pnx833x_shutdown_pic_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
+
+	spin_lock_irqsave(&pnx833x_irq_lock, flags);
+
+	irqflags[pic_irq] = 0;			/* not started */
+	pnx833x_hard_disable_pic_irq(pic_irq);
+
+	spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+}
+
+static void pnx833x_enable_pic_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
+
+	spin_lock_irqsave(&pnx833x_irq_lock, flags);
+
+	irqflags[pic_irq] &= ~IRQFLAG_DISABLED;
+	if (irqflags[pic_irq] == IRQFLAG_STARTED)
+		pnx833x_hard_enable_pic_irq(pic_irq);
+
+	spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+}
+
+static void pnx833x_disable_pic_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE;
+
+	spin_lock_irqsave(&pnx833x_irq_lock, flags);
+
+	irqflags[pic_irq] |= IRQFLAG_DISABLED;
+	pnx833x_hard_disable_pic_irq(pic_irq);
+
+	spin_unlock_irqrestore(&pnx833x_irq_lock, flags);
+}
+
+static void pnx833x_ack_pic_irq(unsigned int irq)
+{
+}
+
+static void pnx833x_end_pic_irq(unsigned int irq)
+{
+}
+
+static DEFINE_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock);
+
+static unsigned int pnx833x_startup_gpio_irq(unsigned int irq)
+{
+	int pin = irq - PNX833X_GPIO_IRQ_BASE;
+	unsigned long flags;
+	spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	pnx833x_gpio_enable_irq(pin);
+	spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	return 0;
+}
+
+static void pnx833x_enable_gpio_irq(unsigned int irq)
+{
+	int pin = irq - PNX833X_GPIO_IRQ_BASE;
+	unsigned long flags;
+	spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	pnx833x_gpio_enable_irq(pin);
+	spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+}
+
+static void pnx833x_disable_gpio_irq(unsigned int irq)
+{
+	int pin = irq - PNX833X_GPIO_IRQ_BASE;
+	unsigned long flags;
+	spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	pnx833x_gpio_disable_irq(pin);
+	spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+}
+
+static void pnx833x_ack_gpio_irq(unsigned int irq)
+{
+}
+
+static void pnx833x_end_gpio_irq(unsigned int irq)
+{
+	int pin = irq - PNX833X_GPIO_IRQ_BASE;
+	unsigned long flags;
+	spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags);
+	pnx833x_gpio_clear_irq(pin);
+	spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags);
+}
+
+static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type)
+{
+	int pin = irq - PNX833X_GPIO_IRQ_BASE;
+	int gpio_mode;
+
+	switch (flow_type) {
+	case IRQ_TYPE_EDGE_RISING:
+		gpio_mode = GPIO_INT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		gpio_mode = GPIO_INT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		gpio_mode = GPIO_INT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		gpio_mode = GPIO_INT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		gpio_mode = GPIO_INT_LEVEL_LOW;
+		break;
+	default:
+		gpio_mode = GPIO_INT_NONE;
+		break;
+	}
+
+	pnx833x_gpio_setup_irq(gpio_mode, pin);
+
+	return 0;
+}
+
+static struct irq_chip pnx833x_pic_irq_type = {
+	.typename = "PNX-PIC",
+	.startup = pnx833x_startup_pic_irq,
+	.shutdown = pnx833x_shutdown_pic_irq,
+	.enable = pnx833x_enable_pic_irq,
+	.disable = pnx833x_disable_pic_irq,
+	.ack = pnx833x_ack_pic_irq,
+	.end = pnx833x_end_pic_irq
+};
+
+static struct irq_chip pnx833x_gpio_irq_type = {
+	.typename = "PNX-GPIO",
+	.startup = pnx833x_startup_gpio_irq,
+	.shutdown = pnx833x_disable_gpio_irq,
+	.enable = pnx833x_enable_gpio_irq,
+	.disable = pnx833x_disable_gpio_irq,
+	.ack = pnx833x_ack_gpio_irq,
+	.end = pnx833x_end_gpio_irq,
+	.set_type = pnx833x_set_type_gpio_irq
+};
+
+void __init arch_init_irq(void)
+{
+	unsigned int irq;
+
+	/* setup standard internal cpu irqs */
+	mips_cpu_irq_init();
+
+	/* Set IRQ information in irq_desc */
+	for (irq = PNX833X_PIC_IRQ_BASE; irq < (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ); irq++) {
+		pnx833x_hard_disable_pic_irq(irq);
+		set_irq_chip_and_handler(irq, &pnx833x_pic_irq_type, handle_simple_irq);
+	}
+
+	for (irq = PNX833X_GPIO_IRQ_BASE; irq < (PNX833X_GPIO_IRQ_BASE + PNX833X_GPIO_NUM_IRQ); irq++)
+		set_irq_chip_and_handler(irq, &pnx833x_gpio_irq_type, handle_simple_irq);
+
+	/* Set PIC priority limiter register to 0 */
+	PNX833X_PIC_INT_PRIORITY = 0;
+
+	/* Setup GPIO IRQ dispatching */
+	pnx833x_startup_pic_irq(PNX833X_PIC_GPIO_INT);
+
+	/* Enable PIC IRQs (HWIRQ2) */
+	if (cpu_has_vint)
+		set_vi_handler(4, pic_dispatch);
+
+	write_c0_status(read_c0_status() | IE_IRQ2);
+}
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+	if (cpu_has_vint)
+		set_vi_handler(cp0_compare_irq, pnx833x_timer_dispatch);
+
+	mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+	return mips_cpu_timer_irq;
+}
+
+void __init plat_time_init(void)
+{
+	/* calculate mips_hpt_frequency based on PNX833X_CLOCK_CPUCP_CTL reg */
+
+	extern unsigned long mips_hpt_frequency;
+	unsigned long reg = PNX833X_CLOCK_CPUCP_CTL;
+
+	if (!(PNX833X_BIT(reg, CLOCK_CPUCP_CTL, EXIT_RESET))) {
+		/* Functional clock is disabled so use crystal frequency */
+		mips_hpt_frequency = 25;
+	} else {
+#if defined(CONFIG_SOC_PNX8335)
+		/* Functional clock is enabled, so get clock multiplier */
+		mips_hpt_frequency = 90 + (10 * PNX8335_REGFIELD(CLOCK_PLL_CPU_CTL, FREQ));
+#else
+		static const unsigned long int freq[4] = {240, 160, 120, 80};
+		mips_hpt_frequency = freq[PNX833X_FIELD(reg, CLOCK_CPUCP_CTL, DIV_CLOCK)];
+#endif
+	}
+
+	printk(KERN_INFO "CPU clock is %ld MHz\n", mips_hpt_frequency);
+
+	mips_hpt_frequency *= 500000;
+}
+

arch/mips/nxp/pnx833x/common/platform.c

@@ -0,0 +1,319 @@
+/*
+ *  platform.c: platform support for PNX833X.
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  Based on software written by:
+ *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial.h>
+#include <linux/serial_pnx8xxx.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#ifdef CONFIG_I2C_PNX0105
+/* Until i2c driver available in kernel.*/
+#include <linux/i2c-pnx0105.h>
+#endif
+
+#include <irq.h>
+#include <irq-mapping.h>
+#include <pnx833x.h>
+
+static u64 uart_dmamask     = DMA_32BIT_MASK;
+
+static struct resource pnx833x_uart_resources[] = {
+	[0] = {
+		.start		= PNX833X_UART0_PORTS_START,
+		.end		= PNX833X_UART0_PORTS_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= PNX833X_PIC_UART0_INT,
+		.end		= PNX833X_PIC_UART0_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= PNX833X_UART1_PORTS_START,
+		.end		= PNX833X_UART1_PORTS_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	[3] = {
+		.start		= PNX833X_PIC_UART1_INT,
+		.end		= PNX833X_PIC_UART1_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct pnx8xxx_port pnx8xxx_ports[] = {
+	[0] = {
+		.port   = {
+			.type		= PORT_PNX8XXX,
+			.iotype		= UPIO_MEM,
+			.membase	= (void __iomem *)PNX833X_UART0_PORTS_START,
+			.mapbase	= PNX833X_UART0_PORTS_START,
+			.irq		= PNX833X_PIC_UART0_INT,
+			.uartclk	= 3692300,
+			.fifosize	= 16,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 0,
+		},
+	},
+	[1] = {
+		.port   = {
+			.type		= PORT_PNX8XXX,
+			.iotype		= UPIO_MEM,
+			.membase	= (void __iomem *)PNX833X_UART1_PORTS_START,
+			.mapbase	= PNX833X_UART1_PORTS_START,
+			.irq		= PNX833X_PIC_UART1_INT,
+			.uartclk	= 3692300,
+			.fifosize	= 16,
+			.flags		= UPF_BOOT_AUTOCONF,
+			.line		= 1,
+		},
+	},
+};
+
+static struct platform_device pnx833x_uart_device = {
+	.name		= "pnx8xxx-uart",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &uart_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= pnx8xxx_ports,
+	},
+	.num_resources	= ARRAY_SIZE(pnx833x_uart_resources),
+	.resource	= pnx833x_uart_resources,
+};
+
+static u64 ehci_dmamask     = DMA_32BIT_MASK;
+
+static struct resource pnx833x_usb_ehci_resources[] = {
+	[0] = {
+		.start		= PNX833X_USB_PORTS_START,
+		.end		= PNX833X_USB_PORTS_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= PNX833X_PIC_USB_INT,
+		.end		= PNX833X_PIC_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pnx833x_usb_ehci_device = {
+	.name		= "pnx833x-ehci",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+	},
+	.num_resources	= ARRAY_SIZE(pnx833x_usb_ehci_resources),
+	.resource	= pnx833x_usb_ehci_resources,
+};
+
+#ifdef CONFIG_I2C_PNX0105
+static struct resource pnx833x_i2c0_resources[] = {
+	{
+		.start		= PNX833X_I2C0_PORTS_START,
+		.end		= PNX833X_I2C0_PORTS_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= PNX833X_PIC_I2C0_INT,
+		.end		= PNX833X_PIC_I2C0_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource pnx833x_i2c1_resources[] = {
+	{
+		.start		= PNX833X_I2C1_PORTS_START,
+		.end		= PNX833X_I2C1_PORTS_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= PNX833X_PIC_I2C1_INT,
+		.end		= PNX833X_PIC_I2C1_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = {
+	{
+		.base = PNX833X_I2C0_PORTS_START,
+		.irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */
+		.clock = 6,	/* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */
+		.bus_addr = 0,	/* no slave support */
+	},
+	{
+		.base = PNX833X_I2C1_PORTS_START,
+		.irq = -1,	/* on high freq, polling is faster */
+		/*.irq = PNX833X_PIC_I2C1_INT,*/
+		.clock = 4,	/* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */
+		.bus_addr = 0,	/* no slave support */
+	},
+};
+
+static struct platform_device pnx833x_i2c0_device = {
+	.name		= "i2c-pnx0105",
+	.id		= 0,
+	.dev = {
+		.platform_data = &pnx833x_i2c_dev[0],
+	},
+	.num_resources  = ARRAY_SIZE(pnx833x_i2c0_resources),
+	.resource	= pnx833x_i2c0_resources,
+};
+
+static struct platform_device pnx833x_i2c1_device = {
+	.name		= "i2c-pnx0105",
+	.id		= 1,
+	.dev = {
+		.platform_data = &pnx833x_i2c_dev[1],
+	},
+	.num_resources  = ARRAY_SIZE(pnx833x_i2c1_resources),
+	.resource	= pnx833x_i2c1_resources,
+};
+#endif
+
+static u64 ethernet_dmamask = DMA_32BIT_MASK;
+
+static struct resource pnx833x_ethernet_resources[] = {
+	[0] = {
+		.start = PNX8335_IP3902_PORTS_START,
+		.end   = PNX8335_IP3902_PORTS_END,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PNX8335_PIC_ETHERNET_INT,
+		.end   = PNX8335_PIC_ETHERNET_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pnx833x_ethernet_device = {
+	.name = "ip3902-eth",
+	.id   = -1,
+	.dev  = {
+		.dma_mask          = &ethernet_dmamask,
+		.coherent_dma_mask = DMA_32BIT_MASK,
+	},
+	.num_resources = ARRAY_SIZE(pnx833x_ethernet_resources),
+	.resource      = pnx833x_ethernet_resources,
+};
+
+static struct resource pnx833x_sata_resources[] = {
+	[0] = {
+		.start = PNX8335_SATA_PORTS_START,
+		.end   = PNX8335_SATA_PORTS_END,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PNX8335_PIC_SATA_INT,
+		.end   = PNX8335_PIC_SATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pnx833x_sata_device = {
+	.name          = "pnx833x-sata",
+	.id            = -1,
+	.num_resources = ARRAY_SIZE(pnx833x_sata_resources),
+	.resource      = pnx833x_sata_resources,
+};
+
+static const char *part_probes[] = {
+	"cmdlinepart",
+	NULL
+};
+
+static void
+pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK));
+	else
+		writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK));
+}
+
+static struct platform_nand_data pnx833x_flash_nand_data = {
+	.chip = {
+		.chip_delay		= 25,
+		.part_probe_types 	= part_probes,
+	},
+	.ctrl = {
+		.cmd_ctrl 		= pnx833x_flash_nand_cmd_ctrl
+	}
+};
+
+/*
+ * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!),
+ * 12 bytes more seems to be the standard that allows for NAND access.
+ */
+static struct resource pnx833x_flash_nand_resource = {
+	.start 	= PNX8335_NAND_BASE,
+	.end 	= PNX8335_NAND_BASE + 12,
+	.flags 	= IORESOURCE_MEM,
+};
+
+static struct platform_device pnx833x_flash_nand = {
+	.name	        = "gen_nand",
+	.id		        = -1,
+	.num_resources	= 1,
+	.resource	    = &pnx833x_flash_nand_resource,
+	.dev            = {
+		.platform_data = &pnx833x_flash_nand_data,
+	},
+};
+
+static struct platform_device *pnx833x_platform_devices[] __initdata = {
+	&pnx833x_uart_device,
+	&pnx833x_usb_ehci_device,
+#ifdef CONFIG_I2C_PNX0105
+	&pnx833x_i2c0_device,
+	&pnx833x_i2c1_device,
+#endif
+	&pnx833x_ethernet_device,
+	&pnx833x_sata_device,
+	&pnx833x_flash_nand,
+};
+
+static int __init pnx833x_platform_init(void)
+{
+	int res;
+
+	res = platform_add_devices(pnx833x_platform_devices,
+				   ARRAY_SIZE(pnx833x_platform_devices));
+
+	return res;
+}
+
+arch_initcall(pnx833x_platform_init);

arch/mips/nxp/pnx833x/common/prom.c

@@ -0,0 +1,70 @@
+/*
+ *  prom.c:
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  Based on software written by:
+ *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+
+void __init prom_init_cmdline(void)
+{
+	int argc = fw_arg0;
+	char **argv = (char **)fw_arg1;
+	char *c = &(arcs_cmdline[0]);
+	int i;
+
+	for (i = 1; i < argc; i++) {
+		strcpy(c, argv[i]);
+		c += strlen(argv[i]);
+		if (i < argc-1)
+			*c++ = ' ';
+	}
+	*c = 0;
+}
+
+char __init *prom_getenv(char *envname)
+{
+	extern char **prom_envp;
+	char **env = prom_envp;
+	int i;
+
+	i = strlen(envname);
+
+	while (*env) {
+		if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=')
+			return *env + i + 1;
+		env++;
+	}
+
+	return 0;
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+char * __init prom_getcmdline(void)
+{
+	return arcs_cmdline;
+}
+

arch/mips/nxp/pnx833x/common/reset.c

@@ -0,0 +1,45 @@
+/*
+ *  reset.c: reset support for PNX833X.
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  Based on software written by:
+ *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/slab.h>
+#include <linux/reboot.h>
+#include <pnx833x.h>
+
+void pnx833x_machine_restart(char *command)
+{
+	PNX833X_RESET_CONTROL_2 = 0;
+	PNX833X_RESET_CONTROL = 0;
+}
+
+void pnx833x_machine_halt(void)
+{
+	while (1)
+		__asm__ __volatile__ ("wait");
+
+}
+
+void pnx833x_machine_power_off(void)
+{
+	pnx833x_machine_halt();
+}

arch/mips/nxp/pnx833x/common/setup.c

@@ -0,0 +1,64 @@
+/*
+ *  setup.c: Setup PNX833X Soc.
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  Based on software written by:
+ *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <asm/reboot.h>
+#include <pnx833x.h>
+#include <gpio.h>
+
+extern void pnx833x_board_setup(void);
+extern void pnx833x_machine_restart(char *);
+extern void pnx833x_machine_halt(void);
+extern void pnx833x_machine_power_off(void);
+
+int __init plat_mem_setup(void)
+{
+	/* fake pci bus to avoid bounce buffers */
+	PCI_DMA_BUS_IS_PHYS = 1;
+
+	/* set mips clock to 320MHz */
+#if defined(CONFIG_SOC_PNX8335)
+	PNX8335_WRITEFIELD(0x17, CLOCK_PLL_CPU_CTL, FREQ);
+#endif
+	pnx833x_gpio_init();	/* so it will be ready in board_setup() */
+
+	pnx833x_board_setup();
+
+	_machine_restart = pnx833x_machine_restart;
+	_machine_halt = pnx833x_machine_halt;
+	pm_power_off = pnx833x_machine_power_off;
+
+	/* IO/MEM resources. */
+	set_io_port_base(KSEG1);
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+	iomem_resource.start = 0;
+	iomem_resource.end = ~0;
+
+	return 0;
+}

arch/mips/nxp/pnx833x/stb22x/Makefile

@@ -0,0 +1,3 @@
+lib-y := board.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/nxp/pnx833x/stb22x/board.c

@@ -0,0 +1,133 @@
+/*
+ *  board.c: STB225 board support.
+ *
+ *  Copyright 2008 NXP Semiconductors
+ *	  Chris Steel <chris.steel@nxp.com>
+ *    Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ *  Based on software written by:
+ *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+#include <linux/mm.h>
+#include <pnx833x.h>
+#include <gpio.h>
+
+/* endianess twiddlers */
+#define PNX8335_DEBUG0 0x4400
+#define PNX8335_DEBUG1 0x4404
+#define PNX8335_DEBUG2 0x4408
+#define PNX8335_DEBUG3 0x440c
+#define PNX8335_DEBUG4 0x4410
+#define PNX8335_DEBUG5 0x4414
+#define PNX8335_DEBUG6 0x4418
+#define PNX8335_DEBUG7 0x441c
+
+int prom_argc;
+char **prom_argv = 0, **prom_envp = 0;
+
+extern void prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "NXP STB22x";
+}
+
+static inline unsigned long env_or_default(char *env, unsigned long dfl)
+{
+	char *str = prom_getenv(env);
+	return str ? simple_strtol(str, 0, 0) : dfl;
+}
+
+void __init prom_init(void)
+{
+	unsigned long memsize;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **)fw_arg1;
+	prom_envp = (char **)fw_arg2;
+
+	prom_init_cmdline();
+
+	memsize = env_or_default("memsize", 0x02000000);
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}
+
+void __init pnx833x_board_setup(void)
+{
+	pnx833x_gpio_select_function_alt(4);
+	pnx833x_gpio_select_output(4);
+	pnx833x_gpio_select_function_alt(5);
+	pnx833x_gpio_select_input(5);
+	pnx833x_gpio_select_function_alt(6);
+	pnx833x_gpio_select_input(6);
+	pnx833x_gpio_select_function_alt(7);
+	pnx833x_gpio_select_output(7);
+
+	pnx833x_gpio_select_function_alt(25);
+	pnx833x_gpio_select_function_alt(26);
+
+	pnx833x_gpio_select_function_alt(27);
+	pnx833x_gpio_select_function_alt(28);
+	pnx833x_gpio_select_function_alt(29);
+	pnx833x_gpio_select_function_alt(30);
+	pnx833x_gpio_select_function_alt(31);
+	pnx833x_gpio_select_function_alt(32);
+	pnx833x_gpio_select_function_alt(33);
+
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+	/* Setup MIU for NAND access on CS0...
+	 *
+	 * (it seems that we must also configure CS1 for reliable operation,
+	 * otherwise the first read ID command will fail if it's read as 4 bytes
+	 * but pass if it's read as 1 word.)
+	 */
+
+	/* Setup MIU CS0 & CS1 timing */
+	PNX833X_MIU_SEL0 = 0;
+	PNX833X_MIU_SEL1 = 0;
+	PNX833X_MIU_SEL0_TIMING = 0x50003081;
+	PNX833X_MIU_SEL1_TIMING = 0x50003081;
+
+	/* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
+	pnx833x_gpio_select_function_alt(0);
+
+	/* Setup GPIO 04 to input NAND read/busy signal */
+	pnx833x_gpio_select_function_io(4);
+	pnx833x_gpio_select_input(4);
+
+	/* Setup GPIO 05 to disable NAND write protect */
+	pnx833x_gpio_select_function_io(5);
+	pnx833x_gpio_select_output(5);
+	pnx833x_gpio_write(1, 5);
+
+#elif defined(CONFIG_MTD_CFI) || defined(CONFIG_MTD_CFI_MODULE)
+
+	/* Set up MIU for 16-bit NOR access on CS0 and CS1... */
+
+	/* Setup MIU CS0 & CS1 timing */
+	PNX833X_MIU_SEL0 = 1;
+	PNX833X_MIU_SEL1 = 1;
+	PNX833X_MIU_SEL0_TIMING = 0x6A08D082;
+	PNX833X_MIU_SEL1_TIMING = 0x6A08D082;
+
+	/* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
+	pnx833x_gpio_select_function_alt(0);
+#endif
+}

arch/mips/pci/Makefile

@@ -13,7 +13,7 @@ obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
 obj-$(CONFIG_SOC_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
-obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+obj-$(CONFIG_NEC_MARKEINS)	+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
 obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
 obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
 

arch/mips/pci/fixup-emma2rh.c

@@ -30,7 +30,7 @@
 
 #include <asm/bootinfo.h>
 
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 #define EMMA2RH_PCI_HOST_SLOT 0x09
 #define EMMA2RH_USB_SLOT 0x03

arch/mips/pci/fixup-rc32434.c

@@ -30,6 +30,7 @@
 #include <linux/init.h>
 
 #include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/irq.h>
 
 static int __devinitdata irq_map[2][12] = {
 	{0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},

arch/mips/pci/ops-emma2rh.c

@@ -30,7 +30,7 @@
 #include <asm/addrspace.h>
 #include <asm/debug.h>
 
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 #define RTABORT (0x1<<9)
 #define RMABORT (0x1<<10)

arch/mips/pci/pci-emma2rh.c

@@ -30,7 +30,7 @@
 
 #include <asm/bootinfo.h>
 
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 static struct resource pci_io_resource = {
 	.name = "pci IO space",

arch/mips/rb532/devices.c

@@ -280,7 +280,7 @@ static int __init plat_setup_devices(void)
 {
 	/* Look for the CF card reader */
 	if (!readl(IDT434_REG_BASE + DEV1MASK))
-		rb532_devs[1] = NULL;
+		rb532_devs[2] = NULL;	/* disable cf_slot0 at index 2 */
 	else {
 		cf_slot0_res[0].start =
 		    readl(IDT434_REG_BASE + DEV1BASE);

arch/mips/rb532/gpio.c

@@ -310,6 +310,10 @@ int __init rb532_gpio_init(void)
 		return -ENXIO;
 	}
 
+	/* Set the interrupt status and level for the CF pin */
+	rb532_gpio_set_int_level(&rb532_gpio_chip->chip, CF_GPIO_NUM, 1);
+	rb532_gpio_set_int_status(&rb532_gpio_chip->chip, CF_GPIO_NUM, 0);
+
 	return 0;
 }
 arch_initcall(rb532_gpio_init);