[PATCH] USB: Add one VID/PID to ftdi_sio

This patch adds the Testo USB interface to the list of devices
recognized by the ftdi_sio module. This device is based on a FT232BL
chip, and is used as an interface to get data from digital sensors
(thermometer, etc). See http://www.testo.com/

Signed-off-by: Colin Leroy <colin@colino.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/ftdi_sio.c

@@ -502,6 +502,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
+	{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

drivers/usb/serial/ftdi_sio.h

@@ -450,6 +450,13 @@
  */
 #define FTDI_THORLABS_PID		0xfaf0 /* ThorLabs USB motor drivers */
 
+/*
+ * Testo products (http://www.testo.com/)
+ * Submitted by Colin Leroy
+ */
+#define TESTO_VID			0x128D
+#define TESTO_USB_INTERFACE_PID		0x0001
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */