Browse Source

[media] s5p-fimc: Add a platform data entry for MIPI-CSI data alignment

Allow the MIPI-CSI data alignment to be defined in the board setup
as it may be different across various camera sensors.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki 14 years ago
parent
commit
e0eec9af8b
2 changed files with 6 additions and 2 deletions
  1. 4 2
      drivers/media/video/s5p-fimc/fimc-reg.c
  2. 2 0
      include/media/s5p_fimc.h

+ 4 - 2
drivers/media/video/s5p-fimc/fimc-reg.c

@@ -665,10 +665,12 @@ int fimc_hw_set_camera_type(struct fimc_dev *fimc,
 			    vid_cap->fmt.code);
 			return -EINVAL;
 		}
-		writel(tmp | (0x1 << 8), fimc->regs + S5P_CSIIMGFMT);
+		tmp |= (cam->csi_data_align == 32) << 8;
+
+		writel(tmp, fimc->regs + S5P_CSIIMGFMT);
 
 	} else if (cam->bus_type == FIMC_ITU_601 ||
-		  cam->bus_type == FIMC_ITU_656) {
+		   cam->bus_type == FIMC_ITU_656) {
 		if (cam->mux_id == 0) /* ITU-A, ITU-B: 0, 1 */
 			cfg |= S5P_CIGCTRL_SELCAM_ITU_A;
 	} else if (cam->bus_type == FIMC_LCD_WB) {

+ 2 - 0
include/media/s5p_fimc.h

@@ -33,6 +33,7 @@ struct i2c_board_info;
  * @board_info: pointer to I2C subdevice's board info
  * @clk_frequency: frequency of the clock the host interface provides to sensor
  * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
+ * @csi_data_align: MIPI-CSI interface data alignment in bits
  * @i2c_bus_num: i2c control bus id the sensor is attached to
  * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
  * @flags: flags defining bus signals polarity inversion (High by default)
@@ -41,6 +42,7 @@ struct s5p_fimc_isp_info {
 	struct i2c_board_info *board_info;
 	unsigned long clk_frequency;
 	enum cam_bus_type bus_type;
+	u16 csi_data_align;
 	u16 i2c_bus_num;
 	u16 mux_id;
 	u16 flags;