|
@@ -87,7 +87,6 @@ struct taos_settings {
|
|
|
struct tsl2583_chip {
|
|
|
struct mutex als_mutex;
|
|
|
struct i2c_client *client;
|
|
|
- struct iio_dev *iio_dev;
|
|
|
struct taos_als_info als_cur_info;
|
|
|
struct taos_settings taos_settings;
|
|
|
int als_time_scale;
|
|
@@ -159,8 +158,7 @@ static void taos_defaults(struct tsl2583_chip *chip)
|
|
|
static int
|
|
|
taos_i2c_read(struct i2c_client *client, u8 reg, u8 *val, unsigned int len)
|
|
|
{
|
|
|
- int ret;
|
|
|
- int i;
|
|
|
+ int i, ret;
|
|
|
|
|
|
for (i = 0; i < len; i++) {
|
|
|
/* select register to write */
|
|
@@ -191,47 +189,47 @@ taos_i2c_read(struct i2c_client *client, u8 reg, u8 *val, unsigned int len)
|
|
|
* the array are then used along with the time scale factor array values, to
|
|
|
* calculate the lux.
|
|
|
*/
|
|
|
-static int taos_get_lux(struct i2c_client *client)
|
|
|
+static int taos_get_lux(struct iio_dev *indio_dev)
|
|
|
{
|
|
|
u16 ch0, ch1; /* separated ch0/ch1 data from device */
|
|
|
u32 lux; /* raw lux calculated from device data */
|
|
|
u32 ratio;
|
|
|
u8 buf[5];
|
|
|
struct taos_lux *p;
|
|
|
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
int i, ret;
|
|
|
u32 ch0lux = 0;
|
|
|
u32 ch1lux = 0;
|
|
|
|
|
|
if (mutex_trylock(&chip->als_mutex) == 0) {
|
|
|
- dev_info(&client->dev, "taos_get_lux device is busy\n");
|
|
|
+ dev_info(&chip->client->dev, "taos_get_lux device is busy\n");
|
|
|
return chip->als_cur_info.lux; /* busy, so return LAST VALUE */
|
|
|
}
|
|
|
|
|
|
if (chip->taos_chip_status != TSL258X_CHIP_WORKING) {
|
|
|
/* device is not enabled */
|
|
|
- dev_err(&client->dev, "taos_get_lux device is not enabled\n");
|
|
|
+ dev_err(&chip->client->dev, "taos_get_lux device is not enabled\n");
|
|
|
ret = -EBUSY ;
|
|
|
goto out_unlock;
|
|
|
}
|
|
|
|
|
|
- ret = taos_i2c_read(client, (TSL258X_CMD_REG), &buf[0], 1);
|
|
|
+ ret = taos_i2c_read(chip->client, (TSL258X_CMD_REG), &buf[0], 1);
|
|
|
if (ret < 0) {
|
|
|
- dev_err(&client->dev, "taos_get_lux failed to read CMD_REG\n");
|
|
|
+ dev_err(&chip->client->dev, "taos_get_lux failed to read CMD_REG\n");
|
|
|
goto out_unlock;
|
|
|
}
|
|
|
/* is data new & valid */
|
|
|
if (!(buf[0] & TSL258X_STA_ADC_INTR)) {
|
|
|
- dev_err(&client->dev, "taos_get_lux data not valid\n");
|
|
|
+ dev_err(&chip->client->dev, "taos_get_lux data not valid\n");
|
|
|
ret = chip->als_cur_info.lux; /* return LAST VALUE */
|
|
|
goto out_unlock;
|
|
|
}
|
|
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
int reg = TSL258X_CMD_REG | (TSL258X_ALS_CHAN0LO + i);
|
|
|
- ret = taos_i2c_read(client, reg, &buf[i], 1);
|
|
|
+ ret = taos_i2c_read(chip->client, reg, &buf[i], 1);
|
|
|
if (ret < 0) {
|
|
|
- dev_err(&client->dev, "taos_get_lux failed to read"
|
|
|
+ dev_err(&chip->client->dev, "taos_get_lux failed to read"
|
|
|
" register %x\n", reg);
|
|
|
goto out_unlock;
|
|
|
}
|
|
@@ -239,11 +237,12 @@ static int taos_get_lux(struct i2c_client *client)
|
|
|
|
|
|
/* clear status, really interrupt status (interrupts are off), but
|
|
|
* we use the bit anyway - don't forget 0x80 - this is a command*/
|
|
|
- ret = i2c_smbus_write_byte(client,
|
|
|
- (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN | TSL258X_CMD_ALS_INT_CLR));
|
|
|
+ ret = i2c_smbus_write_byte(chip->client,
|
|
|
+ (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN |
|
|
|
+ TSL258X_CMD_ALS_INT_CLR));
|
|
|
|
|
|
if (ret < 0) {
|
|
|
- dev_err(&client->dev,
|
|
|
+ dev_err(&chip->client->dev,
|
|
|
"taos_i2c_write_command failed in taos_get_lux, err = %d\n",
|
|
|
ret);
|
|
|
goto out_unlock; /* have no data, so return failure */
|
|
@@ -285,7 +284,7 @@ static int taos_get_lux(struct i2c_client *client)
|
|
|
|
|
|
/* note: lux is 31 bit max at this point */
|
|
|
if (ch1lux > ch0lux) {
|
|
|
- dev_dbg(&client->dev, "No Data - Return last value\n");
|
|
|
+ dev_dbg(&chip->client->dev, "No Data - Return last value\n");
|
|
|
ret = chip->als_cur_info.lux = 0;
|
|
|
goto out_unlock;
|
|
|
}
|
|
@@ -319,54 +318,56 @@ out_unlock:
|
|
|
* to derive actual lux).
|
|
|
* Return updated gain_trim value.
|
|
|
*/
|
|
|
-int taos_als_calibrate(struct i2c_client *client)
|
|
|
+static int taos_als_calibrate(struct iio_dev *indio_dev)
|
|
|
{
|
|
|
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
u8 reg_val;
|
|
|
unsigned int gain_trim_val;
|
|
|
int ret;
|
|
|
int lux_val;
|
|
|
|
|
|
- ret = i2c_smbus_write_byte(client, (TSL258X_CMD_REG | TSL258X_CNTRL));
|
|
|
+ ret = i2c_smbus_write_byte(chip->client,
|
|
|
+ (TSL258X_CMD_REG | TSL258X_CNTRL));
|
|
|
if (ret < 0) {
|
|
|
- dev_err(&client->dev,
|
|
|
+ dev_err(&chip->client->dev,
|
|
|
"taos_als_calibrate failed to reach the CNTRL register, ret=%d\n",
|
|
|
ret);
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
- reg_val = i2c_smbus_read_byte(client);
|
|
|
+ reg_val = i2c_smbus_read_byte(chip->client);
|
|
|
if ((reg_val & (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON))
|
|
|
!= (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) {
|
|
|
- dev_err(&client->dev,
|
|
|
+ dev_err(&chip->client->dev,
|
|
|
"taos_als_calibrate failed: device not powered on with ADC enabled\n");
|
|
|
return -1;
|
|
|
}
|
|
|
|
|
|
- ret = i2c_smbus_write_byte(client, (TSL258X_CMD_REG | TSL258X_CNTRL));
|
|
|
+ ret = i2c_smbus_write_byte(chip->client,
|
|
|
+ (TSL258X_CMD_REG | TSL258X_CNTRL));
|
|
|
if (ret < 0) {
|
|
|
- dev_err(&client->dev,
|
|
|
+ dev_err(&chip->client->dev,
|
|
|
"taos_als_calibrate failed to reach the STATUS register, ret=%d\n",
|
|
|
ret);
|
|
|
return ret;
|
|
|
}
|
|
|
- reg_val = i2c_smbus_read_byte(client);
|
|
|
+ reg_val = i2c_smbus_read_byte(chip->client);
|
|
|
|
|
|
if ((reg_val & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) {
|
|
|
- dev_err(&client->dev,
|
|
|
+ dev_err(&chip->client->dev,
|
|
|
"taos_als_calibrate failed: STATUS - ADC not valid.\n");
|
|
|
return -ENODATA;
|
|
|
}
|
|
|
- lux_val = taos_get_lux(client);
|
|
|
+ lux_val = taos_get_lux(indio_dev);
|
|
|
if (lux_val < 0) {
|
|
|
- dev_err(&client->dev, "taos_als_calibrate failed to get lux\n");
|
|
|
+ dev_err(&chip->client->dev, "taos_als_calibrate failed to get lux\n");
|
|
|
return lux_val;
|
|
|
}
|
|
|
gain_trim_val = (unsigned int) (((chip->taos_settings.als_cal_target)
|
|
|
* chip->taos_settings.als_gain_trim) / lux_val);
|
|
|
|
|
|
if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
|
|
|
- dev_err(&client->dev,
|
|
|
+ dev_err(&chip->client->dev,
|
|
|
"taos_als_calibrate failed: trim_val of %d is out of range\n",
|
|
|
gain_trim_val);
|
|
|
return -ENODATA;
|
|
@@ -380,21 +381,21 @@ int taos_als_calibrate(struct i2c_client *client)
|
|
|
* Turn the device on.
|
|
|
* Configuration must be set before calling this function.
|
|
|
*/
|
|
|
-static int taos_chip_on(struct i2c_client *client)
|
|
|
+static int taos_chip_on(struct iio_dev *indio_dev)
|
|
|
{
|
|
|
int i;
|
|
|
- int ret = 0;
|
|
|
+ int ret;
|
|
|
u8 *uP;
|
|
|
u8 utmp;
|
|
|
int als_count;
|
|
|
int als_time;
|
|
|
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
|
|
|
/* and make sure we're not already on */
|
|
|
if (chip->taos_chip_status == TSL258X_CHIP_WORKING) {
|
|
|
/* if forcing a register update - turn off, then on */
|
|
|
- dev_info(&client->dev, "device is already enabled\n");
|
|
|
- return -EINVAL;
|
|
|
+ dev_info(&chip->client->dev, "device is already enabled\n");
|
|
|
+ return -EINVAL;
|
|
|
}
|
|
|
|
|
|
/* determine als integration regster */
|
|
@@ -416,20 +417,21 @@ static int taos_chip_on(struct i2c_client *client)
|
|
|
/* TSL258x Specific power-on / adc enable sequence
|
|
|
* Power on the device 1st. */
|
|
|
utmp = TSL258X_CNTL_PWR_ON;
|
|
|
- ret = i2c_smbus_write_byte_data(client,
|
|
|
- TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
|
|
|
+ ret = i2c_smbus_write_byte_data(chip->client,
|
|
|
+ TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
|
|
|
if (ret < 0) {
|
|
|
- dev_err(&client->dev, "taos_chip_on failed on CNTRL reg.\n");
|
|
|
+ dev_err(&chip->client->dev, "taos_chip_on failed on CNTRL reg.\n");
|
|
|
return -1;
|
|
|
}
|
|
|
|
|
|
/* Use the following shadow copy for our delay before enabling ADC.
|
|
|
* Write all the registers. */
|
|
|
for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) {
|
|
|
- ret = i2c_smbus_write_byte_data(client, TSL258X_CMD_REG + i,
|
|
|
+ ret = i2c_smbus_write_byte_data(chip->client,
|
|
|
+ TSL258X_CMD_REG + i,
|
|
|
*uP++);
|
|
|
if (ret < 0) {
|
|
|
- dev_err(&client->dev,
|
|
|
+ dev_err(&chip->client->dev,
|
|
|
"taos_chip_on failed on reg %d.\n", i);
|
|
|
return -1;
|
|
|
}
|
|
@@ -439,10 +441,11 @@ static int taos_chip_on(struct i2c_client *client)
|
|
|
/* NOW enable the ADC
|
|
|
* initialize the desired mode of operation */
|
|
|
utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL;
|
|
|
- ret = i2c_smbus_write_byte_data(client, TSL258X_CMD_REG | TSL258X_CNTRL,
|
|
|
+ ret = i2c_smbus_write_byte_data(chip->client,
|
|
|
+ TSL258X_CMD_REG | TSL258X_CNTRL,
|
|
|
utmp);
|
|
|
if (ret < 0) {
|
|
|
- dev_err(&client->dev, "taos_chip_on failed on 2nd CTRL reg.\n");
|
|
|
+ dev_err(&chip->client->dev, "taos_chip_on failed on 2nd CTRL reg.\n");
|
|
|
return -1;
|
|
|
}
|
|
|
chip->taos_chip_status = TSL258X_CHIP_WORKING;
|
|
@@ -450,33 +453,26 @@ static int taos_chip_on(struct i2c_client *client)
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
-static int taos_chip_off(struct i2c_client *client)
|
|
|
+static int taos_chip_off(struct iio_dev *indio_dev)
|
|
|
{
|
|
|
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
int ret;
|
|
|
|
|
|
/* turn device off */
|
|
|
chip->taos_chip_status = TSL258X_CHIP_SUSPENDED;
|
|
|
- ret = i2c_smbus_write_byte_data(client, TSL258X_CMD_REG | TSL258X_CNTRL,
|
|
|
+ ret = i2c_smbus_write_byte_data(chip->client,
|
|
|
+ TSL258X_CMD_REG | TSL258X_CNTRL,
|
|
|
0x00);
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
/* Sysfs Interface Functions */
|
|
|
-static ssize_t taos_device_id(struct device *dev,
|
|
|
-struct device_attribute *attr, char *buf)
|
|
|
-{
|
|
|
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
-
|
|
|
- return sprintf(buf, "%s\n", chip->client->name);
|
|
|
-}
|
|
|
|
|
|
static ssize_t taos_power_state_show(struct device *dev,
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
|
|
|
return sprintf(buf, "%d\n", chip->taos_chip_status);
|
|
|
}
|
|
@@ -485,16 +481,15 @@ static ssize_t taos_power_state_store(struct device *dev,
|
|
|
struct device_attribute *attr, const char *buf, size_t len)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
unsigned long value;
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &value))
|
|
|
return -EINVAL;
|
|
|
|
|
|
if (value == 0)
|
|
|
- taos_chip_off(chip->client);
|
|
|
+ taos_chip_off(indio_dev);
|
|
|
else
|
|
|
- taos_chip_on(chip->client);
|
|
|
+ taos_chip_on(indio_dev);
|
|
|
|
|
|
return len;
|
|
|
}
|
|
@@ -503,7 +498,7 @@ static ssize_t taos_gain_show(struct device *dev,
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
char gain[4] = {0};
|
|
|
|
|
|
switch (chip->taos_settings.als_gain) {
|
|
@@ -528,7 +523,7 @@ static ssize_t taos_gain_store(struct device *dev,
|
|
|
struct device_attribute *attr, const char *buf, size_t len)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
unsigned long value;
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &value))
|
|
@@ -565,7 +560,7 @@ static ssize_t taos_als_time_show(struct device *dev,
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
|
|
|
return sprintf(buf, "%d\n", chip->taos_settings.als_time);
|
|
|
}
|
|
@@ -574,7 +569,7 @@ static ssize_t taos_als_time_store(struct device *dev,
|
|
|
struct device_attribute *attr, const char *buf, size_t len)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
unsigned long value;
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &value))
|
|
@@ -586,7 +581,7 @@ static ssize_t taos_als_time_store(struct device *dev,
|
|
|
if (value % 50)
|
|
|
return -EINVAL;
|
|
|
|
|
|
- chip->taos_settings.als_time = value;
|
|
|
+ chip->taos_settings.als_time = value;
|
|
|
|
|
|
return len;
|
|
|
}
|
|
@@ -602,7 +597,7 @@ static ssize_t taos_als_trim_show(struct device *dev,
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
|
|
|
return sprintf(buf, "%d\n", chip->taos_settings.als_gain_trim);
|
|
|
}
|
|
@@ -611,7 +606,7 @@ static ssize_t taos_als_trim_store(struct device *dev,
|
|
|
struct device_attribute *attr, const char *buf, size_t len)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
unsigned long value;
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &value))
|
|
@@ -627,7 +622,7 @@ static ssize_t taos_als_cal_target_show(struct device *dev,
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
|
|
|
return sprintf(buf, "%d\n", chip->taos_settings.als_cal_target);
|
|
|
}
|
|
@@ -636,7 +631,7 @@ static ssize_t taos_als_cal_target_store(struct device *dev,
|
|
|
struct device_attribute *attr, const char *buf, size_t len)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
unsigned long value;
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &value))
|
|
@@ -651,27 +646,26 @@ static ssize_t taos_als_cal_target_store(struct device *dev,
|
|
|
static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr,
|
|
|
char *buf)
|
|
|
{
|
|
|
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
- int lux;
|
|
|
+ int ret;
|
|
|
|
|
|
- lux = taos_get_lux(chip->client);
|
|
|
+ ret = taos_get_lux(dev_get_drvdata(dev));
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
|
|
|
- return sprintf(buf, "%d\n", lux);
|
|
|
+ return sprintf(buf, "%d\n", ret);
|
|
|
}
|
|
|
|
|
|
static ssize_t taos_do_calibrate(struct device *dev,
|
|
|
struct device_attribute *attr, const char *buf, size_t len)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
unsigned long value;
|
|
|
|
|
|
if (strict_strtoul(buf, 0, &value))
|
|
|
return -EINVAL;
|
|
|
|
|
|
if (value == 1)
|
|
|
- taos_als_calibrate(chip->client);
|
|
|
+ taos_als_calibrate(indio_dev);
|
|
|
|
|
|
return len;
|
|
|
}
|
|
@@ -703,8 +697,8 @@ static ssize_t taos_luxtable_store(struct device *dev,
|
|
|
struct device_attribute *attr, const char *buf, size_t len)
|
|
|
{
|
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
- struct tsl2583_chip *chip = indio_dev->dev_data;
|
|
|
- int value[ARRAY_SIZE(taos_device_lux)];
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
+ int value[ARRAY_SIZE(taos_device_lux)*3 + 1];
|
|
|
int n;
|
|
|
|
|
|
get_options(buf, ARRAY_SIZE(value), value);
|
|
@@ -725,18 +719,17 @@ static ssize_t taos_luxtable_store(struct device *dev,
|
|
|
}
|
|
|
|
|
|
if (chip->taos_chip_status == TSL258X_CHIP_WORKING)
|
|
|
- taos_chip_off(chip->client);
|
|
|
+ taos_chip_off(indio_dev);
|
|
|
|
|
|
/* Zero out the table */
|
|
|
memset(taos_device_lux, 0, sizeof(taos_device_lux));
|
|
|
memcpy(taos_device_lux, &value[1], (value[0] * 4));
|
|
|
|
|
|
- taos_chip_on(chip->client);
|
|
|
+ taos_chip_on(indio_dev);
|
|
|
|
|
|
return len;
|
|
|
}
|
|
|
|
|
|
-static DEVICE_ATTR(name, S_IRUGO, taos_device_id, NULL);
|
|
|
static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
|
|
|
taos_power_state_show, taos_power_state_store);
|
|
|
|
|
@@ -762,7 +755,6 @@ static DEVICE_ATTR(illuminance0_lux_table, S_IRUGO | S_IWUSR,
|
|
|
taos_luxtable_show, taos_luxtable_store);
|
|
|
|
|
|
static struct attribute *sysfs_attrs_ctrl[] = {
|
|
|
- &dev_attr_name.attr,
|
|
|
&dev_attr_power_state.attr,
|
|
|
&dev_attr_illuminance0_calibscale.attr, /* Gain */
|
|
|
&dev_attr_illuminance0_calibscale_available.attr,
|
|
@@ -798,9 +790,10 @@ static const struct iio_info tsl2583_info = {
|
|
|
static int __devinit taos_probe(struct i2c_client *clientp,
|
|
|
const struct i2c_device_id *idp)
|
|
|
{
|
|
|
- int i, ret = 0;
|
|
|
+ int i, ret;
|
|
|
unsigned char buf[TSL258X_MAX_DEVICE_REGS];
|
|
|
- static struct tsl2583_chip *chip;
|
|
|
+ struct tsl2583_chip *chip;
|
|
|
+ struct iio_dev *indio_dev;
|
|
|
|
|
|
if (!i2c_check_functionality(clientp->adapter,
|
|
|
I2C_FUNC_SMBUS_BYTE_DATA)) {
|
|
@@ -810,12 +803,15 @@ static int __devinit taos_probe(struct i2c_client *clientp,
|
|
|
return -EOPNOTSUPP;
|
|
|
}
|
|
|
|
|
|
- chip = kzalloc(sizeof(struct tsl2583_chip), GFP_KERNEL);
|
|
|
- if (!chip)
|
|
|
- return -ENOMEM;
|
|
|
-
|
|
|
+ indio_dev = iio_allocate_device(sizeof(*chip));
|
|
|
+ if (indio_dev == NULL) {
|
|
|
+ ret = -ENOMEM;
|
|
|
+ dev_err(&clientp->dev, "iio allocation failed\n");
|
|
|
+ goto fail1;
|
|
|
+ }
|
|
|
+ chip = iio_priv(indio_dev);
|
|
|
chip->client = clientp;
|
|
|
- i2c_set_clientdata(clientp, chip);
|
|
|
+ i2c_set_clientdata(clientp, indio_dev);
|
|
|
|
|
|
mutex_init(&chip->als_mutex);
|
|
|
chip->taos_chip_status = TSL258X_CHIP_UNKNOWN;
|
|
@@ -827,14 +823,14 @@ static int __devinit taos_probe(struct i2c_client *clientp,
|
|
|
if (ret < 0) {
|
|
|
dev_err(&clientp->dev, "i2c_smbus_write_bytes() to cmd "
|
|
|
"reg failed in taos_probe(), err = %d\n", ret);
|
|
|
- goto fail1;
|
|
|
+ goto fail2;
|
|
|
}
|
|
|
ret = i2c_smbus_read_byte(clientp);
|
|
|
if (ret < 0) {
|
|
|
dev_err(&clientp->dev, "i2c_smbus_read_byte from "
|
|
|
"reg failed in taos_probe(), err = %d\n", ret);
|
|
|
|
|
|
- goto fail1;
|
|
|
+ goto fail2;
|
|
|
}
|
|
|
buf[i] = ret;
|
|
|
}
|
|
@@ -842,58 +838,50 @@ static int __devinit taos_probe(struct i2c_client *clientp,
|
|
|
if (!taos_tsl258x_device(buf)) {
|
|
|
dev_info(&clientp->dev, "i2c device found but does not match "
|
|
|
"expected id in taos_probe()\n");
|
|
|
- goto fail1;
|
|
|
+ goto fail2;
|
|
|
}
|
|
|
|
|
|
ret = i2c_smbus_write_byte(clientp, (TSL258X_CMD_REG | TSL258X_CNTRL));
|
|
|
if (ret < 0) {
|
|
|
dev_err(&clientp->dev, "i2c_smbus_write_byte() to cmd reg "
|
|
|
"failed in taos_probe(), err = %d\n", ret);
|
|
|
- goto fail1;
|
|
|
+ goto fail2;
|
|
|
}
|
|
|
|
|
|
- chip->iio_dev = iio_allocate_device(0);
|
|
|
- if (!chip->iio_dev) {
|
|
|
- ret = -ENOMEM;
|
|
|
- dev_err(&clientp->dev, "iio allocation failed\n");
|
|
|
- goto fail1;
|
|
|
- }
|
|
|
-
|
|
|
- chip->iio_dev->info = &tsl2583_info;
|
|
|
- chip->iio_dev->dev.parent = &clientp->dev;
|
|
|
- chip->iio_dev->dev_data = (void *)(chip);
|
|
|
- chip->iio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
- ret = iio_device_register(chip->iio_dev);
|
|
|
+ indio_dev->info = &tsl2583_info;
|
|
|
+ indio_dev->dev.parent = &clientp->dev;
|
|
|
+ indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
+ indio_dev->name = chip->client->name;
|
|
|
+ ret = iio_device_register(indio_dev);
|
|
|
if (ret) {
|
|
|
dev_err(&clientp->dev, "iio registration failed\n");
|
|
|
- goto fail1;
|
|
|
+ goto fail2;
|
|
|
}
|
|
|
|
|
|
/* Load up the V2 defaults (these are hard coded defaults for now) */
|
|
|
taos_defaults(chip);
|
|
|
|
|
|
/* Make sure the chip is on */
|
|
|
- taos_chip_on(clientp);
|
|
|
+ taos_chip_on(indio_dev);
|
|
|
|
|
|
dev_info(&clientp->dev, "Light sensor found.\n");
|
|
|
-
|
|
|
return 0;
|
|
|
-
|
|
|
fail1:
|
|
|
- kfree(chip);
|
|
|
-
|
|
|
+ iio_free_device(indio_dev);
|
|
|
+fail2:
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
static int taos_suspend(struct i2c_client *client, pm_message_t state)
|
|
|
{
|
|
|
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
|
|
|
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
int ret = 0;
|
|
|
|
|
|
mutex_lock(&chip->als_mutex);
|
|
|
|
|
|
if (chip->taos_chip_status == TSL258X_CHIP_WORKING) {
|
|
|
- ret = taos_chip_off(client);
|
|
|
+ ret = taos_chip_off(indio_dev);
|
|
|
chip->taos_chip_status = TSL258X_CHIP_SUSPENDED;
|
|
|
}
|
|
|
|
|
@@ -903,13 +891,14 @@ static int taos_suspend(struct i2c_client *client, pm_message_t state)
|
|
|
|
|
|
static int taos_resume(struct i2c_client *client)
|
|
|
{
|
|
|
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
|
|
|
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
|
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
|
|
|
int ret = 0;
|
|
|
|
|
|
mutex_lock(&chip->als_mutex);
|
|
|
|
|
|
if (chip->taos_chip_status == TSL258X_CHIP_SUSPENDED)
|
|
|
- ret = taos_chip_on(client);
|
|
|
+ ret = taos_chip_on(indio_dev);
|
|
|
|
|
|
mutex_unlock(&chip->als_mutex);
|
|
|
return ret;
|
|
@@ -918,11 +907,8 @@ static int taos_resume(struct i2c_client *client)
|
|
|
|
|
|
static int __devexit taos_remove(struct i2c_client *client)
|
|
|
{
|
|
|
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
|
|
|
-
|
|
|
- iio_device_unregister(chip->iio_dev);
|
|
|
+ iio_device_unregister(i2c_get_clientdata(client));
|
|
|
|
|
|
- kfree(chip);
|
|
|
return 0;
|
|
|
}
|
|
|
|