Merge branch 'master'

CREDITS

@@ -1127,8 +1127,10 @@ S: Carnegie, Pennsylvania 15106-4304
 S: USA
 
 N: Philip Gladstone
-E: philip@raptor.com
+E: philip@gladstonefamily.net
 D: Kernel / timekeeping stuff
+S: Carlisle, MA 01741
+S: USA
   
 N: Jan-Benedict Glaw
 E: jbglaw@lug-owl.de
@@ -2007,13 +2009,14 @@ S: University of Stuttgart, Germany and
 S: Ecole Nationale Superieure des Telecommunications, Paris
 
 N: Jamie Lokier
-E: jamie@imbolc.ucc.ie
+E: jamie@shareable.org
+W: http://www.shareable.org/
 D: Reboot-through-BIOS for broken 486 motherboards
-D: Some parport fixes
-S: 11 Goodson Walk
-S: Marston
+D: Parport fixes, futex improvements
+D: First instruction of x86 sysenter path :)
+S: 51 Sunningwell Road
 S: Oxford
-S: OX3 0HX
+S: OX1 4SZ
 S: United Kingdom
 
 N: Mark Lord
@@ -3740,10 +3743,11 @@ D: Mylex DAC960 PCI RAID driver
 D: Miscellaneous kernel fixes
 
 N: Alessandro Zummo
-E: azummo@ita.flashnet.it
-W: http://freepage.logicom.it/azummo/
+E: a.zummo@towertech.it
 D: CMI8330 support is sb_card.c
 D: ISAPnP fixes in sb_card.c
+D: ZyXEL omni.net lcd plus driver
+D: RTC subsystem
 S: Italy
 
 N: Marc Zyngier

Documentation/DMA-mapping.txt

@@ -199,6 +199,8 @@ address during PCI bus mastering you might do something like:
 		       "mydev: 24-bit DMA addressing not available.\n");
 		goto ignore_this_device;
 	}
+[Better use DMA_24BIT_MASK instead of 0x00ffffff.
+See linux/include/dma-mapping.h for reference.]
 
 When pci_set_dma_mask() is successful, and returns zero, the PCI layer
 saves away this mask you have provided.  The PCI layer will use this

Documentation/DocBook/Makefile

@@ -28,7 +28,7 @@ PS_METHOD	= $(prefer-db2x)
 
 ###
 # The targets that may be used.
-.PHONY:	xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
 
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -211,3 +211,9 @@ clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS))
 
 #man put files in man subdir - traverse down
 subdir- := man/
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+
+.PHONY: $(PHONY)

Documentation/RCU/whatisRCU.txt

@@ -360,7 +360,7 @@ uses of RCU may be found in listRCU.txt, arrayRCU.txt, and NMI-RCU.txt.
 		struct foo *new_fp;
 		struct foo *old_fp;
 
-		new_fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+		new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
 		spin_lock(&foo_mutex);
 		old_fp = gbl_foo;
 		*new_fp = *old_fp;
@@ -461,7 +461,7 @@ The foo_update_a() function might then be written as follows:
 		struct foo *new_fp;
 		struct foo *old_fp;
 
-		new_fp = kmalloc(sizeof(*fp), GFP_KERNEL);
+		new_fp = kmalloc(sizeof(*new_fp), GFP_KERNEL);
 		spin_lock(&foo_mutex);
 		old_fp = gbl_foo;
 		*new_fp = *old_fp;
@@ -605,7 +605,7 @@ are the same as those shown in the preceding section, so they are omitted.
 	{
 		int cpu;
 
-		for_each_cpu(cpu)
+		for_each_possible_cpu(cpu)
 			run_on(cpu);
 	}
 

Documentation/aoe/mkdevs.sh

@@ -27,6 +27,8 @@ rm -f $dir/discover
 mknod -m 0200 $dir/discover c $MAJOR 3
 rm -f $dir/interfaces
 mknod -m 0200 $dir/interfaces c $MAJOR 4
+rm -f $dir/revalidate
+mknod -m 0200 $dir/revalidate c $MAJOR 5
 
 export n_partitions
 mkshelf=`echo $0 | sed 's!mkdevs!mkshelf!'`

Documentation/aoe/udev.txt

@@ -18,6 +18,7 @@
 SUBSYSTEM="aoe", KERNEL="discover",	NAME="etherd/%k", GROUP="disk", MODE="0220"
 SUBSYSTEM="aoe", KERNEL="err",		NAME="etherd/%k", GROUP="disk", MODE="0440"
 SUBSYSTEM="aoe", KERNEL="interfaces",	NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM="aoe", KERNEL="revalidate",	NAME="etherd/%k", GROUP="disk", MODE="0220"
 
 # aoe block devices     
 KERNEL="etherd*",       NAME="%k", GROUP="disk"

Documentation/arm/Booting

@@ -118,7 +118,7 @@ to store page tables.  The recommended placement is 32KiB into RAM.
 
 In either case, the following conditions must be met:
 
-- Quiesce all DMA capable devicess so that memory does not get
+- Quiesce all DMA capable devices so that memory does not get
   corrupted by bogus network packets or disk data. This will save
   you many hours of debug.
 

Documentation/arm/README

@@ -89,7 +89,7 @@ Modules
   Although modularisation is supported (and required for the FP emulator),
   each module on an ARM2/ARM250/ARM3 machine when is loaded will take
   memory up to the next 32k boundary due to the size of the pages.
-  Therefore, modularisation on these machines really worth it?
+  Therefore, is modularisation on these machines really worth it?
 
   However, ARM6 and up machines allow modules to take multiples of 4k, and
   as such Acorn RiscPCs and other architectures using these processors can

Documentation/arm/SA1100/Assabet

@@ -26,7 +26,7 @@ Installing a bootloader
 
 A couple of bootloaders able to boot Linux on Assabet are available:
 
-BLOB (http://www.lart.tudelft.nl/lartware/blob/)
+BLOB (http://www.lartmaker.nl/lartware/blob/)
 
    BLOB is a bootloader used within the LART project.  Some contributed
    patches were merged into BLOB to add support for Assabet.

Documentation/arm/SA1100/LART

@@ -11,4 +11,4 @@ is under development, with plenty of others in different stages of
 planning.
 
 The hardware designs for this board have been released under an open license;
-see the LART page at http://www.lart.tudelft.nl/ for more information.
+see the LART page at http://www.lartmaker.nl/ for more information.

Documentation/arm/Setup

@@ -58,7 +58,7 @@ below:
  video_y
 
    This describes the character position of cursor on VGA console, and
-   is otherwise unused. (should not used for other console types, and
+   is otherwise unused. (should not be used for other console types, and
    should not be used for other purposes).
 
  memc_control_reg

Documentation/block/biodoc.txt

@@ -132,8 +132,18 @@ Some new queue property settings:
 		limit. No highmem default.
 
 	blk_queue_max_sectors(q, max_sectors)
-		Maximum size request you can handle in units of 512 byte
-		sectors. 255 default.
+		Sets two variables that limit the size of the request.
+
+		- The request queue's max_sectors, which is a soft size in
+		in units of 512 byte sectors, and could be dynamically varied
+		by the core kernel.
+
+		- The request queue's max_hw_sectors, which is a hard limit
+		and reflects the maximum size request a driver can handle
+		in units of 512 byte sectors.
+
+		The default for both max_sectors and max_hw_sectors is
+		255. The upper limit of max_sectors is 1024.
 
 	blk_queue_max_phys_segments(q, max_segments)
 		Maximum physical segments you can handle in a request. 128

Documentation/cachetlb.txt

@@ -362,6 +362,27 @@ maps this page at its virtual address.
 	likely that you will need to flush the instruction cache
 	for copy_to_user_page().
 
+  void flush_anon_page(struct page *page, unsigned long vmaddr)
+  	When the kernel needs to access the contents of an anonymous
+	page, it calls this function (currently only
+	get_user_pages()).  Note: flush_dcache_page() deliberately
+	doesn't work for an anonymous page.  The default
+	implementation is a nop (and should remain so for all coherent
+	architectures).  For incoherent architectures, it should flush
+	the cache of the page at vmaddr in the current user process.
+
+  void flush_kernel_dcache_page(struct page *page)
+	When the kernel needs to modify a user page is has obtained
+	with kmap, it calls this function after all modifications are
+	complete (but before kunmapping it) to bring the underlying
+	page up to date.  It is assumed here that the user has no
+	incoherent cached copies (i.e. the original page was obtained
+	from a mechanism like get_user_pages()).  The default
+	implementation is a nop and should remain so on all coherent
+	architectures.  On incoherent architectures, this should flush
+	the kernel cache for page (using page_address(page)).
+
+
   void flush_icache_range(unsigned long start, unsigned long end)
   	When the kernel stores into addresses that it will execute
 	out of (eg when loading modules), this function is called.

Documentation/cpu-hotplug.txt

@@ -97,13 +97,13 @@ at which time hotplug is disabled.
 
 You really dont need to manipulate any of the system cpu maps. They should
 be read-only for most use. When setting up per-cpu resources almost always use
-cpu_possible_map/for_each_cpu() to iterate.
+cpu_possible_map/for_each_possible_cpu() to iterate.
 
 Never use anything other than cpumask_t to represent bitmap of CPUs.
 
 #include <linux/cpumask.h>
 
-for_each_cpu              - Iterate over cpu_possible_map
+for_each_possible_cpu     - Iterate over cpu_possible_map
 for_each_online_cpu       - Iterate over cpu_online_map
 for_each_present_cpu      - Iterate over cpu_present_map
 for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask.

Documentation/cputopology.txt

@@ -1,5 +1,5 @@
 
-Export cpu topology info by sysfs. Items (attributes) are similar
+Export cpu topology info via sysfs. Items (attributes) are similar
 to /proc/cpuinfo.
 
 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id:
@@ -12,7 +12,7 @@ represent the thread siblings to cpu X in the same core;
 represent the thread siblings to cpu X in the same physical package;
 
 To implement it in an architecture-neutral way, a new source file,
-driver/base/topology.c, is to export the 5 attributes.
+drivers/base/topology.c, is to export the 4 attributes.
 
 If one architecture wants to support this feature, it just needs to
 implement 4 defines, typically in file include/asm-XXX/topology.h.

Documentation/drivers/edac/edac.txt

@@ -21,7 +21,7 @@ within the computer system. In the initial release, memory Correctable Errors
 
 Detecting CE events, then harvesting those events and reporting them,
 CAN be a predictor of future UE events.  With CE events, the system can
-continue to operate, but with less safety. Preventive maintainence and
+continue to operate, but with less safety. Preventive maintenance and
 proactive part replacement of memory DIMMs exhibiting CEs can reduce
 the likelihood of the dreaded UE events and system 'panics'.
 
@@ -29,13 +29,13 @@ the likelihood of the dreaded UE events and system 'panics'.
 In addition, PCI Bus Parity and SERR Errors are scanned for on PCI devices
 in order to determine if errors are occurring on data transfers.
 The presence of PCI Parity errors must be examined with a grain of salt.
-There are several addin adapters that do NOT follow the PCI specification
+There are several add-in adapters that do NOT follow the PCI specification
 with regards to Parity generation and reporting. The specification says
 the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-The PCI Parity EDAC device has the ability to "skip" known flakey
+The PCI Parity EDAC device has the ability to "skip" known flaky
 cards during the parity scan. These are set by the parity "blacklist"
 interface in the sysfs for PCI Parity. (See the PCI section in the sysfs
 section below.) There is also a parity "whitelist" which is used as
@@ -101,7 +101,7 @@ Memory Controller (mc) Model
 
 First a background on the memory controller's model abstracted in EDAC.
 Each mc device controls a set of DIMM memory modules. These modules are
-layed out in a Chip-Select Row (csrowX) and Channel table (chX). There can
+laid out in a Chip-Select Row (csrowX) and Channel table (chX). There can
 be multiple csrows and two channels.
 
 Memory controllers allow for several csrows, with 8 csrows being a typical value.
@@ -131,7 +131,7 @@ for memory DIMMs:
 	DIMM_B1
 
 Labels for these slots are usually silk screened on the motherboard. Slots
-labeled 'A' are channel 0 in this example. Slots labled 'B'
+labeled 'A' are channel 0 in this example. Slots labeled 'B'
 are channel 1. Notice that there are two csrows possible on a
 physical DIMM. These csrows are allocated their csrow assignment
 based on the slot into which the memory DIMM is placed. Thus, when 1 DIMM
@@ -140,7 +140,7 @@ is placed in each Channel, the csrows cross both DIMMs.
 Memory DIMMs come single or dual "ranked". A rank is a populated csrow.
 Thus, 2 single ranked DIMMs, placed in slots DIMM_A0 and DIMM_B0 above
 will have 1 csrow, csrow0. csrow1 will be empty. On the other hand,
-when 2 dual ranked DIMMs are similiaryly placed, then both csrow0 and
+when 2 dual ranked DIMMs are similarly placed, then both csrow0 and
 csrow1 will be populated. The pattern repeats itself for csrow2 and
 csrow3.
 
@@ -246,7 +246,7 @@ Module Version read-only attribute file:
 
 	'mc_version'
 
-	The EDAC CORE modules's version and compile date are shown here to
+	The EDAC CORE module's version and compile date are shown here to
 	indicate what EDAC is running.
 
 
@@ -423,7 +423,7 @@ Total memory managed by this csrow attribute file:
 	'size_mb'
 
 	This attribute file displays, in count of megabytes, of memory
-	that this csrow contatins.
+	that this csrow contains.
 
 
 Memory Type attribute file:
@@ -557,7 +557,7 @@ On Header Type 00 devices the primary status is looked at
 for any parity error regardless of whether Parity is enabled on the
 device.  (The spec indicates parity is generated in some cases).
 On Header Type 01 bridges, the secondary status register is also
-looked at to see if parity ocurred on the bus on the other side of
+looked at to see if parity occurred on the bus on the other side of
 the bridge.
 
 
@@ -588,7 +588,7 @@ Panic on PCI PARITY Error:
 	'panic_on_pci_parity'
 
 
-	This control files enables or disables panic'ing when a parity
+	This control files enables or disables panicking when a parity
 	error has been detected.
 
 
@@ -616,12 +616,12 @@ PCI Device Whitelist:
 
 	This control file allows for an explicit list of PCI devices to be
 	scanned for parity errors. Only devices found on this list will
-	be examined.  The list is a line of hexadecimel VENDOR and DEVICE
+	be examined.  The list is a line of hexadecimal VENDOR and DEVICE
 	ID tuples:
 
 	1022:7450,1434:16a6
 
-	One or more can be inserted, seperated by a comma.
+	One or more can be inserted, separated by a comma.
 
 	To write the above list doing the following as one command line:
 
@@ -639,11 +639,11 @@ PCI Device Blacklist:
 
 	This control file allows for a list of PCI devices to be
 	skipped for scanning.
-	The list is a line of hexadecimel VENDOR and DEVICE ID tuples:
+	The list is a line of hexadecimal VENDOR and DEVICE ID tuples:
 
 	1022:7450,1434:16a6
 
-	One or more can be inserted, seperated by a comma.
+	One or more can be inserted, separated by a comma.
 
 	To write the above list doing the following as one command line:
 
@@ -651,14 +651,14 @@ PCI Device Blacklist:
 		> /sys/devices/system/edac/pci/pci_parity_blacklist
 
 
-	To display what the whitelist current contatins,
+	To display what the whitelist currently contains,
 	simply 'cat' the same file.
 
 =======================================================================
 
 PCI Vendor and Devices IDs can be obtained with the lspci command. Using
 the -n option lspci will display the vendor and device IDs. The system
-adminstrator will have to determine which devices should be scanned or
+administrator will have to determine which devices should be scanned or
 skipped.
 
 
@@ -669,5 +669,5 @@ Turn OFF a whitelist by an empty echo command:
 
 	echo > /sys/devices/system/edac/pci/pci_parity_whitelist
 
-and any previous blacklist will be utililzed.
+and any previous blacklist will be utilized.
 

Documentation/feature-removal-schedule.txt

@@ -176,6 +176,18 @@ Who:	Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@s
 
 ---------------------------
 
+What:	Usage of invalid timevals in setitimer
+When:	March 2007
+Why:	POSIX requires to validate timevals in the setitimer call. This
+	was never done by Linux. The invalid (e.g. negative timevals) were
+	silently converted to more or less random timeouts and intervals.
+	Until the removal a per boot limited number of warnings is printed
+	and the timevals are sanitized.
+
+Who:	Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------
+
 What:	I2C interface of the it87 driver
 When:	January 2007
 Why:	The ISA interface is faster and should be always available. The I2C

Documentation/filesystems/00-INDEX

@@ -1,27 +1,47 @@
 00-INDEX
 	- this file (info on some of the filesystems supported by linux).
+Exporting
+	- explanation of how to make filesystems exportable.
 Locking
 	- info on locking rules as they pertain to Linux VFS.
 adfs.txt
 	- info and mount options for the Acorn Advanced Disc Filing System.
+afs.txt
+	- info and examples for the distributed AFS (Andrew File System) fs.
 affs.txt
 	- info and mount options for the Amiga Fast File System.
+automount-support.txt
+	- information about filesystem automount support.
+befs.txt
+	- information about the BeOS filesystem for Linux.
 bfs.txt
 	- info for the SCO UnixWare Boot Filesystem (BFS).
 cifs.txt
-	- description of the CIFS filesystem
+	- description of the CIFS filesystem.
 coda.txt
 	- description of the CODA filesystem.
 configfs/
 	- directory containing configfs documentation and example code.
 cramfs.txt
-	- info on the cram filesystem for small storage (ROMs etc)
+	- info on the cram filesystem for small storage (ROMs etc).
+dentry-locking.txt
+	- info on the RCU-based dcache locking model.
 devfs/
 	- directory containing devfs documentation.
+directory-locking
+	- info about the locking scheme used for directory operations.
 dlmfs.txt
 	- info on the userspace interface to the OCFS2 DLM.
 ext2.txt
 	- info, mount options and specifications for the Ext2 filesystem.
+ext3.txt
+	- info, mount options and specifications for the Ext3 filesystem.
+files.txt
+	- info on file management in the Linux kernel.
+fuse.txt
+	- info on the Filesystem in User SpacE including mount options.
+hfs.txt
+	- info on the Macintosh HFS Filesystem for Linux.
 hpfs.txt
 	- info and mount options for the OS/2 HPFS.
 isofs.txt
@@ -32,23 +52,43 @@ ncpfs.txt
 	- info on Novell Netware(tm) filesystem using NCP protocol.
 ntfs.txt
 	- info and mount options for the NTFS filesystem (Windows NT).
-proc.txt
-	- info on Linux's /proc filesystem.
 ocfs2.txt
 	- info and mount options for the OCFS2 clustered filesystem.
+porting
+	- various information on filesystem porting.
+proc.txt
+	- info on Linux's /proc filesystem.
+ramfs-rootfs-initramfs.txt
+	- info on the 'in memory' filesystems ramfs, rootfs and initramfs.
+reiser4.txt
+	- info on the Reiser4 filesystem based on dancing tree algorithms.
+relayfs.txt
+	- info on relayfs, for efficient streaming from kernel to user space.
 romfs.txt
-	- Description of the ROMFS filesystem.
+	- description of the ROMFS filesystem.
 smbfs.txt
-	- info on using filesystems with the SMB protocol (Windows 3.11 and NT)
+	- info on using filesystems with the SMB protocol (Win 3.11 and NT).
+spufs.txt
+	- info and mount options for the SPU filesystem used on Cell.
+sysfs-pci.txt
+	- info on accessing PCI device resources through sysfs.
+sysfs.txt
+	- info on sysfs, a ram-based filesystem for exporting kernel objects.
 sysv-fs.txt
 	- info on the SystemV/V7/Xenix/Coherent filesystem.
+tmpfs.txt
+	- info on tmpfs, a filesystem that holds all files in virtual memory.
 udf.txt
 	- info and mount options for the UDF filesystem.
 ufs.txt
 	- info on the ufs filesystem.
+v9fs.txt
+	- v9fs is a Unix implementation of the Plan 9 9p remote fs protocol.
 vfat.txt
 	- info on using the VFAT filesystem used in Windows NT and Windows 95
 vfs.txt
-	- Overview of the Virtual File System
+	- overview of the Virtual File System
 xfs.txt
 	- info and mount options for the XFS filesystem.
+xip.txt
+	- info on execute-in-place for file mappings.

Documentation/filesystems/v9fs.txt → Documentation/filesystems/9p.txt

@@ -1,5 +1,5 @@
-			V9FS: 9P2000 for Linux
-			======================
+	  	    v9fs: Plan 9 Resource Sharing for Linux
+		    =======================================
 
 ABOUT
 =====
@@ -9,18 +9,19 @@ v9fs is a Unix implementation of the Plan 9 9p remote filesystem protocol.
 This software was originally developed by Ron Minnich <rminnich@lanl.gov>
 and Maya Gokhale <maya@lanl.gov>.  Additional development by Greg Watson
 <gwatson@lanl.gov> and most recently Eric Van Hensbergen
-<ericvh@gmail.com> and Latchesar Ionkov <lucho@ionkov.net>.
+<ericvh@gmail.com>, Latchesar Ionkov <lucho@ionkov.net> and Russ Cox
+<rsc@swtch.com>.
 
 USAGE
 =====
 
 For remote file server:
 
-	mount -t 9P 10.10.1.2 /mnt/9
+	mount -t 9p 10.10.1.2 /mnt/9
 
 For Plan 9 From User Space applications (http://swtch.com/plan9)
 
-	mount -t 9P `namespace`/acme /mnt/9 -o proto=unix,name=$USER
+	mount -t 9p `namespace`/acme /mnt/9 -o proto=unix,uname=$USER
 
 OPTIONS
 =======
@@ -32,7 +33,7 @@ OPTIONS
  			fd   - used passed file descriptors for connection
                                 (see rfdno and wfdno)
 
-  name=name	user name to attempt mount as on the remote server.  The
+  uname=name	user name to attempt mount as on the remote server.  The
   		server may override or ignore this value.  Certain user
 		names may require authentication.
 
@@ -42,7 +43,7 @@ OPTIONS
   debug=n	specifies debug level.  The debug level is a bitmask.
   			0x01 = display verbose error messages
 			0x02 = developer debug (DEBUG_CURRENT)
-			0x04 = display 9P trace
+			0x04 = display 9p trace
 			0x08 = display VFS trace
 			0x10 = display Marshalling debug
 			0x20 = display RPC debug
@@ -53,11 +54,11 @@ OPTIONS
 
   wfdno=n	the file descriptor for writing with proto=fd
 
-  maxdata=n	the number of bytes to use for 9P packet payload (msize)
+  maxdata=n	the number of bytes to use for 9p packet payload (msize)
 
   port=n	port to connect to on the remote server
 
-  noextend	force legacy mode (no 9P2000.u semantics)
+  noextend	force legacy mode (no 9p2000.u semantics)
 
   uid		attempt to mount as a particular uid
 
@@ -72,7 +73,7 @@ OPTIONS
 RESOURCES
 =========
 
-The Linux version of the 9P server is now maintained under the npfs project
+The Linux version of the 9p server is now maintained under the npfs project
 on sourceforge (http://sourceforge.net/projects/npfs).
 
 There are user and developer mailing lists available through the v9fs project

Documentation/filesystems/proc.txt

@@ -121,7 +121,7 @@ Table 1-1: Process specific entries in /proc
 ..............................................................................
  File    Content                                        
  cmdline Command line arguments                         
- cpu	 Current and last cpu in wich it was executed		(2.4)(smp)
+ cpu	 Current and last cpu in which it was executed		(2.4)(smp)
  cwd	 Link to the current working directory
  environ Values of environment variables      
  exe	 Link to the executable of this process
@@ -309,13 +309,13 @@ is the same by default:
   > cat /proc/irq/0/smp_affinity 
   ffffffff
 
-It's a bitmask, in wich you can specify wich CPUs can handle the IRQ, you can
+It's a bitmask, in which you can specify which CPUs can handle the IRQ, you can
 set it by doing:
 
   > echo 1 > /proc/irq/prof_cpu_mask
 
 This means that only the first CPU will handle the IRQ, but you can also echo 5
-wich means that only the first and fourth CPU can handle the IRQ.
+which means that only the first and fourth CPU can handle the IRQ.
 
 The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
 between all the CPUs which are allowed to handle it. As usual the kernel has

Documentation/filesystems/udf.txt

@@ -26,6 +26,20 @@ The following mount options are supported:
 	nostrict	Unset strict conformance
 	iocharset=	Set the NLS character set
 
+The uid= and gid= options need a bit more explaining.  They will accept a
+decimal numeric value which will be used as the default ID for that mount.
+They will also accept the string "ignore" and "forget".  For files on the disk
+that are owned by nobody ( -1 ), they will instead look as if they are owned
+by the default ID.  The ignore option causes the default ID to override all
+IDs on the disk, not just -1.  The forget option causes all IDs to be written
+to disk as -1, so when the media is later remounted, they will appear to be
+owned by whatever default ID it is mounted with at that time.
+
+For typical desktop use of removable media, you should set the ID to that
+of the interactively logged on user, and also specify both the forget and
+ignore options.  This way the interactive user will always see the files
+on the disk as belonging to him.
+
 The remaining are for debugging and disaster recovery:
 
 	novrs		Skip volume sequence recognition 

Documentation/filesystems/vfs.txt

@@ -230,10 +230,15 @@ only called from a process context (i.e. not from an interrupt handler
 or bottom half).
 
   alloc_inode: this method is called by inode_alloc() to allocate memory
- 	for struct inode and initialize it.
+ 	for struct inode and initialize it.  If this function is not
+ 	defined, a simple 'struct inode' is allocated.  Normally
+ 	alloc_inode will be used to allocate a larger structure which
+ 	contains a 'struct inode' embedded within it.
 
   destroy_inode: this method is called by destroy_inode() to release
-  	resources allocated for struct inode.
+  	resources allocated for struct inode.  It is only required if
+  	->alloc_inode was defined and simply undoes anything done by
+	->alloc_inode.
 
   read_inode: this method is called to read a specific inode from the
         mounted filesystem.  The i_ino member in the struct inode is
@@ -443,14 +448,81 @@ otherwise noted.
 The Address Space Object
 ========================
 
-The address space object is used to identify pages in the page cache.
-
+The address space object is used to group and manage pages in the page
+cache.  It can be used to keep track of the pages in a file (or
+anything else) and also track the mapping of sections of the file into
+process address spaces.
+
+There are a number of distinct yet related services that an
+address-space can provide.  These include communicating memory
+pressure, page lookup by address, and keeping track of pages tagged as
+Dirty or Writeback.
+
+The first can be used independently to the others.  The VM can try to
+either write dirty pages in order to clean them, or release clean
+pages in order to reuse them.  To do this it can call the ->writepage
+method on dirty pages, and ->releasepage on clean pages with
+PagePrivate set. Clean pages without PagePrivate and with no external
+references will be released without notice being given to the
+address_space.
+
+To achieve this functionality, pages need to be placed on an LRU with
+lru_cache_add and mark_page_active needs to be called whenever the
+page is used.
+
+Pages are normally kept in a radix tree index by ->index. This tree
+maintains information about the PG_Dirty and PG_Writeback status of
+each page, so that pages with either of these flags can be found
+quickly.
+
+The Dirty tag is primarily used by mpage_writepages - the default
+->writepages method.  It uses the tag to find dirty pages to call
+->writepage on.  If mpage_writepages is not used (i.e. the address
+provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is
+almost unused.  write_inode_now and sync_inode do use it (through
+__sync_single_inode) to check if ->writepages has been successful in
+writing out the whole address_space.
+
+The Writeback tag is used by filemap*wait* and sync_page* functions,
+via wait_on_page_writeback_range, to wait for all writeback to
+complete.  While waiting ->sync_page (if defined) will be called on
+each page that is found to require writeback.
+
+An address_space handler may attach extra information to a page,
+typically using the 'private' field in the 'struct page'.  If such
+information is attached, the PG_Private flag should be set.  This will
+cause various VM routines to make extra calls into the address_space
+handler to deal with that data.
+
+An address space acts as an intermediate between storage and
+application.  Data is read into the address space a whole page at a
+time, and provided to the application either by copying of the page,
+or by memory-mapping the page.
+Data is written into the address space by the application, and then
+written-back to storage typically in whole pages, however the
+address_space has finer control of write sizes.
+
+The read process essentially only requires 'readpage'.  The write
+process is more complicated and uses prepare_write/commit_write or
+set_page_dirty to write data into the address_space, and writepage,
+sync_page, and writepages to writeback data to storage.
+
+Adding and removing pages to/from an address_space is protected by the
+inode's i_mutex.
+
+When data is written to a page, the PG_Dirty flag should be set.  It
+typically remains set until writepage asks for it to be written.  This
+should clear PG_Dirty and set PG_Writeback.  It can be actually
+written at any point after PG_Dirty is clear.  Once it is known to be
+safe, PG_Writeback is cleared.
+
+Writeback makes use of a writeback_control structure...
 
 struct address_space_operations
 -------------------------------
 
 This describes how the VFS can manipulate mapping of a file to page cache in
-your filesystem. As of kernel 2.6.13, the following members are defined:
+your filesystem. As of kernel 2.6.16, the following members are defined:
 
 struct address_space_operations {
 	int (*writepage)(struct page *page, struct writeback_control *wbc);
@@ -469,47 +541,148 @@ struct address_space_operations {
 			loff_t offset, unsigned long nr_segs);
 	struct page* (*get_xip_page)(struct address_space *, sector_t,
 			int);
+	/* migrate the contents of a page to the specified target */
+	int (*migratepage) (struct page *, struct page *);
 };
 
-  writepage: called by the VM write a dirty page to backing store.
+  writepage: called by the VM to write a dirty page to backing store.
+      This may happen for data integrity reasons (i.e. 'sync'), or
+      to free up memory (flush).  The difference can be seen in
+      wbc->sync_mode.
+      The PG_Dirty flag has been cleared and PageLocked is true.
+      writepage should start writeout, should set PG_Writeback,
+      and should make sure the page is unlocked, either synchronously
+      or asynchronously when the write operation completes.
+
+      If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to
+      try too hard if there are problems, and may choose to write out
+      other pages from the mapping if that is easier (e.g. due to
+      internal dependencies).  If it chooses not to start writeout, it
+      should return AOP_WRITEPAGE_ACTIVATE so that the VM will not keep
+      calling ->writepage on that page.
+
+      See the file "Locking" for more details.
 
   readpage: called by the VM to read a page from backing store.
+       The page will be Locked when readpage is called, and should be
+       unlocked and marked uptodate once the read completes.
+       If ->readpage discovers that it needs to unlock the page for
+       some reason, it can do so, and then return AOP_TRUNCATED_PAGE.
+       In this case, the page will be relocated, relocked and if
+       that all succeeds, ->readpage will be called again.
 
   sync_page: called by the VM to notify the backing store to perform all
   	queued I/O operations for a page. I/O operations for other pages
 	associated with this address_space object may also be performed.
 
+	This function is optional and is called only for pages with
+  	PG_Writeback set while waiting for the writeback to complete.
+
   writepages: called by the VM to write out pages associated with the
-  	address_space object.
+  	address_space object.  If wbc->sync_mode is WBC_SYNC_ALL, then
+  	the writeback_control will specify a range of pages that must be
+  	written out.  If it is WBC_SYNC_NONE, then a nr_to_write is given
+	and that many pages should be written if possible.
+	If no ->writepages is given, then mpage_writepages is used
+  	instead.  This will choose pages from the address space that are
+  	tagged as DIRTY and will pass them to ->writepage.
 
   set_page_dirty: called by the VM to set a page dirty.
+        This is particularly needed if an address space attaches
+        private data to a page, and that data needs to be updated when
+        a page is dirtied.  This is called, for example, when a memory
+	mapped page gets modified.
+	If defined, it should set the PageDirty flag, and the
+        PAGECACHE_TAG_DIRTY tag in the radix tree.
 
   readpages: called by the VM to read pages associated with the address_space
-  	object.
+  	object. This is essentially just a vector version of
+  	readpage.  Instead of just one page, several pages are
+  	requested.
+	readpages is only used for read-ahead, so read errors are
+  	ignored.  If anything goes wrong, feel free to give up.
 
   prepare_write: called by the generic write path in VM to set up a write
-  	request for a page.
-
-  commit_write: called by the generic write path in VM to write page to
-  	its backing store.
+  	request for a page.  This indicates to the address space that
+  	the given range of bytes is about to be written.  The
+  	address_space should check that the write will be able to
+  	complete, by allocating space if necessary and doing any other
+  	internal housekeeping.  If the write will update parts of
+  	any basic-blocks on storage, then those blocks should be
+  	pre-read (if they haven't been read already) so that the
+  	updated blocks can be written out properly.
+	The page will be locked.  If prepare_write wants to unlock the
+  	page it, like readpage, may do so and return
+  	AOP_TRUNCATED_PAGE.
+	In this case the prepare_write will be retried one the lock is
+  	regained.
+
+  commit_write: If prepare_write succeeds, new data will be copied
+        into the page and then commit_write will be called.  It will
+        typically update the size of the file (if appropriate) and
+        mark the inode as dirty, and do any other related housekeeping
+        operations.  It should avoid returning an error if possible -
+        errors should have been handled by prepare_write.
 
   bmap: called by the VFS to map a logical block offset within object to
-  	physical block number. This method is use by for the legacy FIBMAP
-	ioctl. Other uses are discouraged.
-
-  invalidatepage: called by the VM on truncate to disassociate a page from its
-  	address_space mapping.
-
-  releasepage: called by the VFS to release filesystem specific metadata from
-  	a page.
-
-  direct_IO: called by the VM for direct I/O writes and reads.
+  	physical block number. This method is used by the FIBMAP
+  	ioctl and for working with swap-files.  To be able to swap to
+  	a file, the file must have a stable mapping to a block
+  	device.  The swap system does not go through the filesystem
+  	but instead uses bmap to find out where the blocks in the file
+  	are and uses those addresses directly.
+
+
+  invalidatepage: If a page has PagePrivate set, then invalidatepage
+        will be called when part or all of the page is to be removed
+	from the address space.  This generally corresponds to either a
+	truncation or a complete invalidation of the address space
+	(in the latter case 'offset' will always be 0).
+	Any private data associated with the page should be updated
+	to reflect this truncation.  If offset is 0, then
+	the private data should be released, because the page
+	must be able to be completely discarded.  This may be done by
+        calling the ->releasepage function, but in this case the
+        release MUST succeed.
+
+  releasepage: releasepage is called on PagePrivate pages to indicate
+        that the page should be freed if possible.  ->releasepage
+        should remove any private data from the page and clear the
+        PagePrivate flag.  It may also remove the page from the
+        address_space.  If this fails for some reason, it may indicate
+        failure with a 0 return value.
+	This is used in two distinct though related cases.  The first
+        is when the VM finds a clean page with no active users and
+        wants to make it a free page.  If ->releasepage succeeds, the
+        page will be removed from the address_space and become free.
+
+	The second case if when a request has been made to invalidate
+        some or all pages in an address_space.  This can happen
+        through the fadvice(POSIX_FADV_DONTNEED) system call or by the
+        filesystem explicitly requesting it as nfs and 9fs do (when
+        they believe the cache may be out of date with storage) by
+        calling invalidate_inode_pages2().
+	If the filesystem makes such a call, and needs to be certain
+        that all pages are invalidated, then its releasepage will
+        need to ensure this.  Possibly it can clear the PageUptodate
+        bit if it cannot free private data yet.
+
+  direct_IO: called by the generic read/write routines to perform
+        direct_IO - that is IO requests which bypass the page cache
+        and transfer data directly between the storage and the
+        application's address space.
 
   get_xip_page: called by the VM to translate a block number to a page.
 	The page is valid until the corresponding filesystem is unmounted.
 	Filesystems that want to use execute-in-place (XIP) need to implement
 	it.  An example implementation can be found in fs/ext2/xip.c.
 
+  migrate_page:  This is used to compact the physical memory usage.
+        If the VM wants to relocate a page (maybe off a memory card
+        that is signalling imminent failure) it will pass a new page
+	and an old page to this function.  migrate_page should
+	transfer any private data across and update any references
+        that it has to the page.
 
 The File Object
 ===============

Documentation/firmware_class/firmware_sample_driver.c

@@ -23,7 +23,6 @@ char __init inkernel_firmware[] = "let's say that this is firmware\n";
 #endif
 
 static struct device ghost_device = {
-	.name      = "Ghost Device",
 	.bus_id    = "ghost0",
 };
 
@@ -92,7 +91,7 @@ static void sample_probe_async(void)
 {
 	/* Let's say that I can't sleep */
 	int error;
-	error = request_firmware_nowait (THIS_MODULE,
+	error = request_firmware_nowait (THIS_MODULE, FW_ACTION_NOHOTPLUG,
 					 "sample_driver_fw", &ghost_device,
 					 "my device pointer",
 					 sample_probe_async_cont);

Documentation/firmware_class/firmware_sample_firmware_class.c

@@ -172,7 +172,6 @@ static void fw_remove_class_device(struct class_device *class_dev)
 static struct class_device *class_dev;
 
 static struct device my_device = {
-	.name      = "Sample Device",
 	.bus_id    = "my_dev0",
 };
 

Documentation/ioctl-number.txt

@@ -78,8 +78,6 @@ Code	Seq#	Include File		Comments
 '#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
 '1'	00-1F	<linux/timepps.h>	PPS kit from Ulrich Windl
 					<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
-'6'	00-10	<asm-i386/processor.h>	Intel IA32 microcode update driver
-					<mailto:tigran@veritas.com>
 '8'	all				SNP8023 advanced NIC card
 					<mailto:mcr@solidum.com>
 'A'	00-1F	linux/apm_bios.h

Documentation/kbuild/makefiles.txt

@@ -17,6 +17,7 @@ This document describes the Linux kernel Makefiles.
 	   --- 3.8 Command line dependency
 	   --- 3.9 Dependency tracking
 	   --- 3.10 Special Rules
+	   --- 3.11 $(CC) support functions
 
 	=== 4 Host Program support
 	   --- 4.1 Simple Host Program
@@ -38,7 +39,6 @@ This document describes the Linux kernel Makefiles.
 	   --- 6.6 Commands useful for building a boot image
 	   --- 6.7 Custom kbuild commands
 	   --- 6.8 Preprocessing linker scripts
-	   --- 6.9 $(CC) support functions
 
 	=== 7 Kbuild Variables
 	=== 8 Makefile language
@@ -106,9 +106,9 @@ This document is aimed towards normal developers and arch developers.
 Most Makefiles within the kernel are kbuild Makefiles that use the
 kbuild infrastructure. This chapter introduce the syntax used in the
 kbuild makefiles.
-The preferred name for the kbuild files is 'Kbuild' but 'Makefile' will
-continue to be supported. All new developmen is expected to use the
-Kbuild filename.
+The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can
+be used and if both a 'Makefile' and a 'Kbuild' file exists then the 'Kbuild'
+file will be used.
 
 Section 3.1 "Goal definitions" is a quick intro, further chapters provide
 more details, with real examples.
@@ -385,6 +385,102 @@ more details, with real examples.
 	to prerequisites are referenced with $(src) (because they are not
 	generated files).
 
+--- 3.11 $(CC) support functions
+
+	The kernel may be build with several different versions of
+	$(CC), each supporting a unique set of features and options.
+	kbuild provide basic support to check for valid options for $(CC).
+	$(CC) is useally the gcc compiler, but other alternatives are
+	available.
+
+    as-option
+    	as-option is used to check if $(CC) when used to compile
+	assembler (*.S) files supports the given option. An optional
+	second option may be specified if first option are not supported.
+
+	Example:
+		#arch/sh/Makefile
+		cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),)
+
+	In the above example cflags-y will be assinged the the option
+	-Wa$(comma)-isa=$(isa-y) if it is supported by $(CC).
+	The second argument is optional, and if supplied will be used
+	if first argument is not supported.
+
+    cc-option
+	cc-option is used to check if $(CC) support a given option, and not
+	supported to use an optional second option.
+
+	Example:
+		#arch/i386/Makefile
+		cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586)
+
+	In the above example cflags-y will be assigned the option
+	-march=pentium-mmx if supported by $(CC), otherwise -march-i586.
+	The second argument to cc-option is optional, and if omitted
+	cflags-y will be assigned no value if first option is not supported.
+
+   cc-option-yn
+   	cc-option-yn is used to check if gcc supports a given option
+	and return 'y' if supported, otherwise 'n'.
+
+	Example:
+		#arch/ppc/Makefile
+		biarch := $(call cc-option-yn, -m32)
+		aflags-$(biarch) += -a32
+		cflags-$(biarch) += -m32
+	
+	In the above example $(biarch) is set to y if $(CC) supports the -m32
+	option. When $(biarch) equals to y the expanded variables $(aflags-y)
+	and $(cflags-y) will be assigned the values -a32 and -m32.
+
+    cc-option-align
+	gcc version >= 3.0 shifted type of options used to speify
+	alignment of functions, loops etc. $(cc-option-align) whrn used
+	as prefix to the align options will select the right prefix:
+	gcc < 3.00
+		cc-option-align = -malign
+	gcc >= 3.00
+		cc-option-align = -falign
+	
+	Example:
+		CFLAGS += $(cc-option-align)-functions=4
+
+	In the above example the option -falign-functions=4 is used for
+	gcc >= 3.00. For gcc < 3.00 -malign-functions=4 is used.
+	
+    cc-version
+	cc-version return a numerical version of the $(CC) compiler version.
+	The format is <major><minor> where both are two digits. So for example
+	gcc 3.41 would return 0341.
+	cc-version is useful when a specific $(CC) version is faulty in one
+	area, for example the -mregparm=3 were broken in some gcc version
+	even though the option was accepted by gcc.
+
+	Example:
+		#arch/i386/Makefile
+		cflags-y += $(shell \
+		if [ $(call cc-version) -ge 0300 ] ; then \
+			echo "-mregparm=3"; fi ;)
+
+	In the above example -mregparm=3 is only used for gcc version greater
+	than or equal to gcc 3.0.
+
+    cc-ifversion
+	cc-ifversion test the version of $(CC) and equals last argument if
+	version expression is true.
+
+	Example:
+		#fs/reiserfs/Makefile
+		EXTRA_CFLAGS := $(call cc-ifversion, -lt, 0402, -O1)
+
+	In this example EXTRA_CFLAGS will be assigned the value -O1 if the
+	$(CC) version is less than 4.2.
+	cc-ifversion takes all the shell operators: 
+	-eq, -ne, -lt, -le, -gt, and -ge
+	The third parameter may be a text as in this example, but it may also
+	be an expanded variable or a macro.
+
 
 === 4 Host Program support
 
@@ -973,74 +1069,6 @@ When kbuild executes the following steps are followed (roughly):
 	architecture specific files.
 
 
---- 6.9 $(CC) support functions
-
-	The kernel may be build with several different versions of
-	$(CC), each supporting a unique set of features and options.
-	kbuild provide basic support to check for valid options for $(CC).
-	$(CC) is useally the gcc compiler, but other alternatives are
-	available.
-
-    cc-option
-	cc-option is used to check if $(CC) support a given option, and not
-	supported to use an optional second option.
-
-	Example:
-		#arch/i386/Makefile
-		cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586)
-
-	In the above example cflags-y will be assigned the option
-	-march=pentium-mmx if supported by $(CC), otherwise -march-i586.
-	The second argument to cc-option is optional, and if omitted
-	cflags-y will be assigned no value if first option is not supported.
-
-   cc-option-yn
-   	cc-option-yn is used to check if gcc supports a given option
-	and return 'y' if supported, otherwise 'n'.
-
-	Example:
-		#arch/ppc/Makefile
-		biarch := $(call cc-option-yn, -m32)
-		aflags-$(biarch) += -a32
-		cflags-$(biarch) += -m32
-	
-	In the above example $(biarch) is set to y if $(CC) supports the -m32
-	option. When $(biarch) equals to y the expanded variables $(aflags-y)
-	and $(cflags-y) will be assigned the values -a32 and -m32.
-
-    cc-option-align
-	gcc version >= 3.0 shifted type of options used to speify
-	alignment of functions, loops etc. $(cc-option-align) whrn used
-	as prefix to the align options will select the right prefix:
-	gcc < 3.00
-		cc-option-align = -malign
-	gcc >= 3.00
-		cc-option-align = -falign
-	
-	Example:
-		CFLAGS += $(cc-option-align)-functions=4
-
-	In the above example the option -falign-functions=4 is used for
-	gcc >= 3.00. For gcc < 3.00 -malign-functions=4 is used.
-	
-    cc-version
-	cc-version return a numerical version of the $(CC) compiler version.
-	The format is <major><minor> where both are two digits. So for example
-	gcc 3.41 would return 0341.
-	cc-version is useful when a specific $(CC) version is faulty in one
-	area, for example the -mregparm=3 were broken in some gcc version
-	even though the option was accepted by gcc.
-
-	Example:
-		#arch/i386/Makefile
-		cflags-y += $(shell \
-		if [ $(call cc-version) -ge 0300 ] ; then \
-			echo "-mregparm=3"; fi ;)
-
-	In the above example -mregparm=3 is only used for gcc version greater
-	than or equal to gcc 3.0.
-	
-
 === 7 Kbuild Variables
 
 The top Makefile exports the following variables:

Documentation/kbuild/modules.txt

@@ -13,6 +13,7 @@ In this document you will find information about:
 	   --- 2.2 Available targets
 	   --- 2.3 Available options
 	   --- 2.4 Preparing the kernel tree for module build
+	   --- 2.5 Building separate files for a module
 	=== 3. Example commands
 	=== 4. Creating a kbuild file for an external module
 	=== 5. Include files
@@ -22,7 +23,10 @@ In this document you will find information about:
 	=== 6. Module installation
 	   --- 6.1 INSTALL_MOD_PATH
 	   --- 6.2 INSTALL_MOD_DIR
-	=== 7. Module versioning
+	=== 7. Module versioning & Module.symvers
+	   --- 7.1 Symbols fron the kernel (vmlinux + modules)
+	   --- 7.2 Symbols and external modules
+	   --- 7.3 Symbols from another external module
 	=== 8. Tips & Tricks
 	   --- 8.1 Testing for CONFIG_FOO_BAR
 
@@ -88,7 +92,8 @@ when building an external module.
 	make -C $KDIR M=$PWD modules_install
 		Install the external module(s).
 		Installation default is in /lib/modules/<kernel-version>/extra,
-		but may be prefixed with INSTALL_MOD_PATH - see separate chapter.
+		but may be prefixed with INSTALL_MOD_PATH - see separate
+		chapter.
 
 	make -C $KDIR M=$PWD clean
 		Remove all generated files for the module - the kernel
@@ -131,6 +136,16 @@ when building an external module.
 	      Therefore a full kernel build needs to be executed to make
 	      module versioning work.
 
+--- 2.5 Building separate files for a module
+	It is possible to build single files which is part of a module.
+	This works equal for the kernel, a module and even for external
+	modules.
+	Examples (module foo.ko, consist of bar.o, baz.o):
+		make -C $KDIR M=`pwd` bar.lst
+		make -C $KDIR M=`pwd` bar.o
+		make -C $KDIR M=`pwd` foo.ko
+		make -C $KDIR M=`pwd` /
+	
 
 === 3. Example commands
 
@@ -422,7 +437,7 @@ External modules are installed in the directory:
 		=> Install dir: /lib/modules/$(KERNELRELEASE)/gandalf
 
 
-=== 7. Module versioning
+=== 7. Module versioning & Module.symvers
 
 Module versioning is enabled by the CONFIG_MODVERSIONS tag.
 
@@ -432,11 +447,80 @@ when a module is loaded/used then the CRC values contained in the kernel are
 compared with similar values in the module. If they are not equal then the
 kernel refuses to load the module.
 
-During a kernel build a file named Module.symvers will be generated. This
-file includes the symbol version of all symbols within the kernel. If the 
-Module.symvers file is saved from the last full kernel compile one does not
-have to do a full kernel compile to build a module version's compatible module.
+Module.symvers contains a list of all exported symbols from a kernel build.
+
+--- 7.1 Symbols fron the kernel (vmlinux + modules)
+
+	During a kernel build a file named Module.symvers will be generated.
+	Module.symvers contains all exported symbols from the kernel and
+	compiled modules. For each symbols the corresponding CRC value
+	is stored too.
+
+	The syntax of the Module.symvers file is:
+		<CRC>       <Symbol>           <module>
+	Sample:
+		0x2d036834  scsi_remove_host   drivers/scsi/scsi_mod
 
+	For a kernel build without CONFIG_MODVERSIONING enabled the crc
+	would read: 0x00000000
+
+	Module.symvers serve two purposes.
+	1) It list all exported symbols both from vmlinux and all modules
+	2) It list CRC if CONFIG_MODVERSION is enabled
+
+--- 7.2 Symbols and external modules
+
+	When building an external module the build system needs access to
+	the symbols from the kernel to check if all external symbols are
+	defined. This is done in the MODPOST step and to obtain all
+	symbols modpost reads Module.symvers from the kernel.
+	If a Module.symvers file is present in the directory where
+	the external module is being build this file will be read too.
+	During the MODPOST step a new Module.symvers file will be written
+	containing all exported symbols that was not defined in the kernel.
+	
+--- 7.3 Symbols from another external module
+
+	Sometimes one external module uses exported symbols from another
+	external module. Kbuild needs to have full knowledge on all symbols
+	to avoid spitting out warnings about undefined symbols.
+	Two solutions exist to let kbuild know all symbols of more than
+	one external module.
+	The method with a top-level kbuild file is recommended but may be
+	impractical in certain situations.
+
+	Use a top-level Kbuild file
+		If you have two modules: 'foo', 'bar' and 'foo' needs symbols
+		from 'bar' then one can use a common top-level kbuild file so
+		both modules are compiled in same build.
+
+		Consider following directory layout:
+		./foo/ <= contains the foo module
+		./bar/ <= contains the bar module
+		The top-level Kbuild file would then look like:
+		
+		#./Kbuild: (this file may also be named Makefile)
+			obj-y := foo/ bar/
+
+		Executing:
+			make -C $KDIR M=`pwd`
+
+		will then do the expected and compile both modules with full
+		knowledge on symbols from both modules.
+
+	Use an extra Module.symvers file
+		When an external module is build a Module.symvers file is
+		generated containing all exported symbols which are not
+		defined in the kernel.
+		To get access to symbols from module 'bar' one can copy the
+		Module.symvers file from the compilation of the 'bar' module
+		to the directory where the 'foo' module is build.
+		During the module build kbuild will read the Module.symvers
+		file in the directory of the external module and when the
+		build is finished a new Module.symvers file is created
+		containing the sum of all symbols defined and not part of the
+		kernel.
+		
 === 8. Tips & Tricks
 
 --- 8.1 Testing for CONFIG_FOO_BAR

Documentation/kernel-parameters.txt

@@ -367,12 +367,17 @@ running once the system is up.
 		tty<n>	Use the virtual console device <n>.
 
 		ttyS<n>[,options]
+		ttyUSB0[,options]
 			Use the specified serial port.  The options are of
-			the form "bbbbpn", where "bbbb" is the baud rate,
-			"p" is parity ("n", "o", or "e"), and "n" is bits.
-			Default is "9600n8".
-
-			See also Documentation/serial-console.txt.
+			the form "bbbbpnf", where "bbbb" is the baud rate,
+			"p" is parity ("n", "o", or "e"), "n" is number of
+			bits, and "f" is flow control ("r" for RTS or
+			omit it).  Default is "9600n8".
+
+			See Documentation/serial-console.txt for more
+			information.  See
+			Documentation/networking/netconsole.txt for an
+			alternative.
 
 		uart,io,<addr>[,options]
 		uart,mmio,<addr>[,options]

Documentation/m68k/README.buddha

@@ -29,7 +29,7 @@ address is written to $4a, then the whole Byte is written to
 $48, while it doesn't matter how often you're writing to $4a
 as  long as $48 is not touched.  After $48 has been written,
 the  whole card disappears from $e8 and is mapped to the new
-address just written.  Make shure $4a is written before $48,
+address just written.  Make sure $4a is written before $48,
 otherwise your chance is only 1:16 to find the board :-).
 
 The local memory-map is even active when mapped to $e8:

Documentation/networking/TODO

@@ -1,18 +0,0 @@
-To-do items for network drivers
--------------------------------
-
-* Move ethernet crc routine to generic code
-
-* (for 2.5) Integrate Jamal Hadi Salim's netdev Rx polling API change
-
-* Audit all net drivers to make sure magic packet / wake-on-lan /
-  similar features are disabled in the driver by default.
-
-* Audit all net drivers to make sure the module always prints out a
-  version string when loaded as a module, but only prints a version
-  string when built into the kernel if a device is detected.
-
-* Add ETHTOOL_GDRVINFO ioctl support to all ethernet drivers.
-
-* dmfe PCI DMA is totally wrong and only works on x86
-

Documentation/networking/ifenslave.c

@@ -87,7 +87,7 @@
  *	   would fail and generate an error message in the system log.
  * 	 - For opt_c: slave should not be set to the master's setting
  *	   while it is running. It was already set during enslave. To
- *	   simplify things, it is now handeled separately.
+ *	   simplify things, it is now handled separately.
  *
  *    - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
  *	 - Code cleanup and style changes

Documentation/networking/packet_mmap.txt

@@ -40,7 +40,7 @@ network interface card supports some sort of interrupt load mitigation or
 + How to use CONFIG_PACKET_MMAP
 --------------------------------------------------------------------------------
 
-From the user standpoint, you should use the higher level libpcap library, wich
+From the user standpoint, you should use the higher level libpcap library, which
 is a de facto standard, portable across nearly all operating systems
 including Win32. 
 
@@ -217,8 +217,8 @@ called pg_vec, its size limits the number of blocks that can be allocated.
 
 kmalloc allocates any number of bytes of phisically contiguous memory from 
 a pool of pre-determined sizes. This pool of memory is mantained by the slab 
-allocator wich is at the end the responsible for doing the allocation and 
-hence wich imposes the maximum memory that kmalloc can allocate. 
+allocator which is at the end the responsible for doing the allocation and 
+hence which imposes the maximum memory that kmalloc can allocate. 
 
 In a 2.4/2.6 kernel and the i386 architecture, the limit is 131072 bytes. The 
 predetermined sizes that kmalloc uses can be checked in the "size-<bytes>" 
@@ -254,7 +254,7 @@ and, the number of frames be
 
 	<block number> * <block size> / <frame size>
 
-Suposse the following parameters, wich apply for 2.6 kernel and an
+Suposse the following parameters, which apply for 2.6 kernel and an
 i386 architecture:
 
 	<size-max> = 131072 bytes
@@ -360,7 +360,7 @@ TP_STATUS_LOSING      : indicates there were packet drops from last time
                         statistics where checked with getsockopt() and
                         the PACKET_STATISTICS option.
 
-TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets wich 
+TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which 
                         it's checksum will be done in hardware. So while 
                         reading the packet we should not try to check the 
                         checksum. 

Documentation/networking/ray_cs.txt

@@ -25,7 +25,7 @@ the essid= string parameter is available via the kernel command line.
 This will change after the method of sorting out parameters for all
 the PCMCIA drivers is agreed upon.  If you must have a built in driver
 with nondefault parameters, they can be edited in
-/usr/src/linux/drivers/net/pcmcia/ray_cs.c.  Searching for MODULE_PARM
+/usr/src/linux/drivers/net/pcmcia/ray_cs.c.  Searching for module_param
 will find them all.
 
 Information on card services is available at:

Documentation/networking/vortex.txt

@@ -24,36 +24,44 @@ Since kernel 2.3.99-pre6, this driver incorporates the support for the
 
 This driver supports the following hardware:
 
-   3c590 Vortex 10Mbps
-   3c592 EISA 10mbps Demon/Vortex
-   3c597 EISA Fast Demon/Vortex
-   3c595 Vortex 100baseTx
-   3c595 Vortex 100baseT4
-   3c595 Vortex 100base-MII
-   3Com Vortex
-   3c900 Boomerang 10baseT
-   3c900 Boomerang 10Mbps Combo
-   3c900 Cyclone 10Mbps TPO
-   3c900B Cyclone 10Mbps T
-   3c900 Cyclone 10Mbps Combo
-   3c900 Cyclone 10Mbps TPC
-   3c900B-FL Cyclone 10base-FL
-   3c905 Boomerang 100baseTx
-   3c905 Boomerang 100baseT4
-   3c905B Cyclone 100baseTx
-   3c905B Cyclone 10/100/BNC
-   3c905B-FX Cyclone 100baseFx
-   3c905C Tornado
-   3c980 Cyclone
-   3cSOHO100-TX Hurricane
-   3c555 Laptop Hurricane
-   3c575 Boomerang CardBus
-   3CCFE575 Cyclone CardBus
-   3CCFE575CT Cyclone CardBus
-   3CCFE656 Cyclone CardBus
-   3CCFEM656 Cyclone CardBus
-   3c450 Cyclone/unknown
-
+	3c590 Vortex 10Mbps
+	3c592 EISA 10Mbps Demon/Vortex
+	3c597 EISA Fast Demon/Vortex
+	3c595 Vortex 100baseTx
+	3c595 Vortex 100baseT4
+	3c595 Vortex 100base-MII
+	3c900 Boomerang 10baseT
+	3c900 Boomerang 10Mbps Combo
+	3c900 Cyclone 10Mbps TPO
+	3c900 Cyclone 10Mbps Combo
+	3c900 Cyclone 10Mbps TPC
+	3c900B-FL Cyclone 10base-FL
+	3c905 Boomerang 100baseTx
+	3c905 Boomerang 100baseT4
+	3c905B Cyclone 100baseTx
+	3c905B Cyclone 10/100/BNC
+	3c905B-FX Cyclone 100baseFx
+	3c905C Tornado
+	3c920B-EMB-WNM (ATI Radeon 9100 IGP)
+	3c980 Cyclone
+	3c980C Python-T
+	3cSOHO100-TX Hurricane
+	3c555 Laptop Hurricane
+	3c556 Laptop Tornado
+	3c556B Laptop Hurricane
+	3c575 [Megahertz] 10/100 LAN  CardBus
+	3c575 Boomerang CardBus
+	3CCFE575BT Cyclone CardBus
+	3CCFE575CT Tornado CardBus
+	3CCFE656 Cyclone CardBus
+	3CCFEM656B Cyclone+Winmodem CardBus
+	3CXFEM656C Tornado+Winmodem CardBus
+	3c450 HomePNA Tornado
+	3c920 Tornado
+	3c982 Hydra Dual Port A
+	3c982 Hydra Dual Port B
+	3c905B-T4
+	3c920B-EMB-WNM Tornado
 
 Module parameters
 =================
@@ -293,11 +301,6 @@ Donald's wake-on-LAN page:
 
      http://www.scyld.com/wakeonlan.html
 
-3Com's documentation for many NICs, including the ones supported by
-this driver is available at 
-
-     http://support.3com.com/partners/developer/developer_form.html
-
 3Com's DOS-based application for setting up the NICs EEPROMs:
 
 	ftp://ftp.3com.com/pub/nic/3c90x/3c90xx2.exe
@@ -312,10 +315,10 @@ Autonegotiation notes
 ---------------------
 
   The driver uses a one-minute heartbeat for adapting to changes in
-  the external LAN environment.  This means that when, for example, a
-  machine is unplugged from a hubbed 10baseT LAN plugged into a
-  switched 100baseT LAN, the throughput will be quite dreadful for up
-  to sixty seconds.  Be patient.
+  the external LAN environment if link is up and 5 seconds if link is down.
+  This means that when, for example, a machine is unplugged from a hubbed
+  10baseT LAN plugged into a  switched 100baseT LAN, the throughput
+  will be quite dreadful for up to sixty seconds.  Be patient.
 
   Cisco interoperability note from Walter Wong <wcw+@CMU.EDU>:
 

Documentation/pnp.txt

@@ -115,6 +115,9 @@ pnp_unregister_protocol
 pnp_register_driver
 - adds a PnP driver to the Plug and Play Layer
 - this includes driver model integration
+- returns zero for success or a negative error number for failure; count
+  calls to the .add() method if you need to know how many devices bind to
+  the driver
 
 pnp_unregister_driver
 - removes a PnP driver from the Plug and Play Layer

Documentation/powerpc/booting-without-of.txt

@@ -719,6 +719,11 @@ address which can extend beyond that limit.
     - model : this is your board name/model
     - #address-cells : address representation for "root" devices
     - #size-cells: the size representation for "root" devices
+    - device_type : This property shouldn't be necessary. However, if
+      you decide to create a device_type for your root node, make sure it
+      is _not_ "chrp" unless your platform is a pSeries or PAPR compliant
+      one for 64-bit, or a CHRP-type machine for 32-bit as this will
+      matched by the kernel this way.
 
   Additionally, some recommended properties are:
 

Documentation/robust-futex-ABI.txt

@@ -0,0 +1,182 @@
+Started by Paul Jackson <pj@sgi.com>
+
+The robust futex ABI
+--------------------
+
+Robust_futexes provide a mechanism that is used in addition to normal
+futexes, for kernel assist of cleanup of held locks on task exit.
+
+The interesting data as to what futexes a thread is holding is kept on a
+linked list in user space, where it can be updated efficiently as locks
+are taken and dropped, without kernel intervention.  The only additional
+kernel intervention required for robust_futexes above and beyond what is
+required for futexes is:
+
+ 1) a one time call, per thread, to tell the kernel where its list of
+    held robust_futexes begins, and
+ 2) internal kernel code at exit, to handle any listed locks held
+    by the exiting thread.
+
+The existing normal futexes already provide a "Fast Userspace Locking"
+mechanism, which handles uncontested locking without needing a system
+call, and handles contested locking by maintaining a list of waiting
+threads in the kernel.  Options on the sys_futex(2) system call support
+waiting on a particular futex, and waking up the next waiter on a
+particular futex.
+
+For robust_futexes to work, the user code (typically in a library such
+as glibc linked with the application) has to manage and place the
+necessary list elements exactly as the kernel expects them.  If it fails
+to do so, then improperly listed locks will not be cleaned up on exit,
+probably causing deadlock or other such failure of the other threads
+waiting on the same locks.
+
+A thread that anticipates possibly using robust_futexes should first
+issue the system call:
+
+    asmlinkage long
+    sys_set_robust_list(struct robust_list_head __user *head, size_t len);
+
+The pointer 'head' points to a structure in the threads address space
+consisting of three words.  Each word is 32 bits on 32 bit arch's, or 64
+bits on 64 bit arch's, and local byte order.  Each thread should have
+its own thread private 'head'.
+
+If a thread is running in 32 bit compatibility mode on a 64 native arch
+kernel, then it can actually have two such structures - one using 32 bit
+words for 32 bit compatibility mode, and one using 64 bit words for 64
+bit native mode.  The kernel, if it is a 64 bit kernel supporting 32 bit
+compatibility mode, will attempt to process both lists on each task
+exit, if the corresponding sys_set_robust_list() call has been made to
+setup that list.
+
+  The first word in the memory structure at 'head' contains a
+  pointer to a single linked list of 'lock entries', one per lock,
+  as described below.  If the list is empty, the pointer will point
+  to itself, 'head'.  The last 'lock entry' points back to the 'head'.
+
+  The second word, called 'offset', specifies the offset from the
+  address of the associated 'lock entry', plus or minus, of what will
+  be called the 'lock word', from that 'lock entry'.  The 'lock word'
+  is always a 32 bit word, unlike the other words above.  The 'lock
+  word' holds 3 flag bits in the upper 3 bits, and the thread id (TID)
+  of the thread holding the lock in the bottom 29 bits.  See further
+  below for a description of the flag bits.
+
+  The third word, called 'list_op_pending', contains transient copy of
+  the address of the 'lock entry', during list insertion and removal,
+  and is needed to correctly resolve races should a thread exit while
+  in the middle of a locking or unlocking operation.
+
+Each 'lock entry' on the single linked list starting at 'head' consists
+of just a single word, pointing to the next 'lock entry', or back to
+'head' if there are no more entries.  In addition, nearby to each 'lock
+entry', at an offset from the 'lock entry' specified by the 'offset'
+word, is one 'lock word'.
+
+The 'lock word' is always 32 bits, and is intended to be the same 32 bit
+lock variable used by the futex mechanism, in conjunction with
+robust_futexes.  The kernel will only be able to wakeup the next thread
+waiting for a lock on a threads exit if that next thread used the futex
+mechanism to register the address of that 'lock word' with the kernel.
+
+For each futex lock currently held by a thread, if it wants this
+robust_futex support for exit cleanup of that lock, it should have one
+'lock entry' on this list, with its associated 'lock word' at the
+specified 'offset'.  Should a thread die while holding any such locks,
+the kernel will walk this list, mark any such locks with a bit
+indicating their holder died, and wakeup the next thread waiting for
+that lock using the futex mechanism.
+
+When a thread has invoked the above system call to indicate it
+anticipates using robust_futexes, the kernel stores the passed in 'head'
+pointer for that task.  The task may retrieve that value later on by
+using the system call:
+
+    asmlinkage long
+    sys_get_robust_list(int pid, struct robust_list_head __user **head_ptr,
+                        size_t __user *len_ptr);
+
+It is anticipated that threads will use robust_futexes embedded in
+larger, user level locking structures, one per lock.  The kernel
+robust_futex mechanism doesn't care what else is in that structure, so
+long as the 'offset' to the 'lock word' is the same for all
+robust_futexes used by that thread.  The thread should link those locks
+it currently holds using the 'lock entry' pointers.  It may also have
+other links between the locks, such as the reverse side of a double
+linked list, but that doesn't matter to the kernel.
+
+By keeping its locks linked this way, on a list starting with a 'head'
+pointer known to the kernel, the kernel can provide to a thread the
+essential service available for robust_futexes, which is to help clean
+up locks held at the time of (a perhaps unexpectedly) exit.
+
+Actual locking and unlocking, during normal operations, is handled
+entirely by user level code in the contending threads, and by the
+existing futex mechanism to wait for, and wakeup, locks.  The kernels
+only essential involvement in robust_futexes is to remember where the
+list 'head' is, and to walk the list on thread exit, handling locks
+still held by the departing thread, as described below.
+
+There may exist thousands of futex lock structures in a threads shared
+memory, on various data structures, at a given point in time. Only those
+lock structures for locks currently held by that thread should be on
+that thread's robust_futex linked lock list a given time.
+
+A given futex lock structure in a user shared memory region may be held
+at different times by any of the threads with access to that region. The
+thread currently holding such a lock, if any, is marked with the threads
+TID in the lower 29 bits of the 'lock word'.
+
+When adding or removing a lock from its list of held locks, in order for
+the kernel to correctly handle lock cleanup regardless of when the task
+exits (perhaps it gets an unexpected signal 9 in the middle of
+manipulating this list), the user code must observe the following
+protocol on 'lock entry' insertion and removal:
+
+On insertion:
+ 1) set the 'list_op_pending' word to the address of the 'lock word'
+    to be inserted,
+ 2) acquire the futex lock,
+ 3) add the lock entry, with its thread id (TID) in the bottom 29 bits
+    of the 'lock word', to the linked list starting at 'head', and
+ 4) clear the 'list_op_pending' word.
+
+On removal:
+ 1) set the 'list_op_pending' word to the address of the 'lock word'
+    to be removed,
+ 2) remove the lock entry for this lock from the 'head' list,
+ 2) release the futex lock, and
+ 2) clear the 'lock_op_pending' word.
+
+On exit, the kernel will consider the address stored in
+'list_op_pending' and the address of each 'lock word' found by walking
+the list starting at 'head'.  For each such address, if the bottom 29
+bits of the 'lock word' at offset 'offset' from that address equals the
+exiting threads TID, then the kernel will do two things:
+
+ 1) if bit 31 (0x80000000) is set in that word, then attempt a futex
+    wakeup on that address, which will waken the next thread that has
+    used to the futex mechanism to wait on that address, and
+ 2) atomically set  bit 30 (0x40000000) in the 'lock word'.
+
+In the above, bit 31 was set by futex waiters on that lock to indicate
+they were waiting, and bit 30 is set by the kernel to indicate that the
+lock owner died holding the lock.
+
+The kernel exit code will silently stop scanning the list further if at
+any point:
+
+ 1) the 'head' pointer or an subsequent linked list pointer
+    is not a valid address of a user space word
+ 2) the calculated location of the 'lock word' (address plus
+    'offset') is not the valud address of a 32 bit user space
+    word
+ 3) if the list contains more than 1 million (subject to
+    future kernel configuration changes) elements.
+
+When the kernel sees a list entry whose 'lock word' doesn't have the
+current threads TID in the lower 29 bits, it does nothing with that
+entry, and goes on to the next entry.
+
+Bit 29 (0x20000000) of the 'lock word' is reserved for future use.

Documentation/robust-futexes.txt

@@ -0,0 +1,218 @@
+Started by: Ingo Molnar <mingo@redhat.com>
+
+Background
+----------
+
+what are robust futexes? To answer that, we first need to understand
+what futexes are: normal futexes are special types of locks that in the
+noncontended case can be acquired/released from userspace without having
+to enter the kernel.
+
+A futex is in essence a user-space address, e.g. a 32-bit lock variable
+field. If userspace notices contention (the lock is already owned and
+someone else wants to grab it too) then the lock is marked with a value
+that says "there's a waiter pending", and the sys_futex(FUTEX_WAIT)
+syscall is used to wait for the other guy to release it. The kernel
+creates a 'futex queue' internally, so that it can later on match up the
+waiter with the waker - without them having to know about each other.
+When the owner thread releases the futex, it notices (via the variable
+value) that there were waiter(s) pending, and does the
+sys_futex(FUTEX_WAKE) syscall to wake them up.  Once all waiters have
+taken and released the lock, the futex is again back to 'uncontended'
+state, and there's no in-kernel state associated with it. The kernel
+completely forgets that there ever was a futex at that address. This
+method makes futexes very lightweight and scalable.
+
+"Robustness" is about dealing with crashes while holding a lock: if a
+process exits prematurely while holding a pthread_mutex_t lock that is
+also shared with some other process (e.g. yum segfaults while holding a
+pthread_mutex_t, or yum is kill -9-ed), then waiters for that lock need
+to be notified that the last owner of the lock exited in some irregular
+way.
+
+To solve such types of problems, "robust mutex" userspace APIs were
+created: pthread_mutex_lock() returns an error value if the owner exits
+prematurely - and the new owner can decide whether the data protected by
+the lock can be recovered safely.
+
+There is a big conceptual problem with futex based mutexes though: it is
+the kernel that destroys the owner task (e.g. due to a SEGFAULT), but
+the kernel cannot help with the cleanup: if there is no 'futex queue'
+(and in most cases there is none, futexes being fast lightweight locks)
+then the kernel has no information to clean up after the held lock!
+Userspace has no chance to clean up after the lock either - userspace is
+the one that crashes, so it has no opportunity to clean up. Catch-22.
+
+In practice, when e.g. yum is kill -9-ed (or segfaults), a system reboot
+is needed to release that futex based lock. This is one of the leading
+bugreports against yum.
+
+To solve this problem, the traditional approach was to extend the vma
+(virtual memory area descriptor) concept to have a notion of 'pending
+robust futexes attached to this area'. This approach requires 3 new
+syscall variants to sys_futex(): FUTEX_REGISTER, FUTEX_DEREGISTER and
+FUTEX_RECOVER. At do_exit() time, all vmas are searched to see whether
+they have a robust_head set. This approach has two fundamental problems
+left:
+
+ - it has quite complex locking and race scenarios. The vma-based
+   approach had been pending for years, but they are still not completely
+   reliable.
+
+ - they have to scan _every_ vma at sys_exit() time, per thread!
+
+The second disadvantage is a real killer: pthread_exit() takes around 1
+microsecond on Linux, but with thousands (or tens of thousands) of vmas
+every pthread_exit() takes a millisecond or more, also totally
+destroying the CPU's L1 and L2 caches!
+
+This is very much noticeable even for normal process sys_exit_group()
+calls: the kernel has to do the vma scanning unconditionally! (this is
+because the kernel has no knowledge about how many robust futexes there
+are to be cleaned up, because a robust futex might have been registered
+in another task, and the futex variable might have been simply mmap()-ed
+into this process's address space).
+
+This huge overhead forced the creation of CONFIG_FUTEX_ROBUST so that
+normal kernels can turn it off, but worse than that: the overhead makes
+robust futexes impractical for any type of generic Linux distribution.
+
+So something had to be done.
+
+New approach to robust futexes
+------------------------------
+
+At the heart of this new approach there is a per-thread private list of
+robust locks that userspace is holding (maintained by glibc) - which
+userspace list is registered with the kernel via a new syscall [this
+registration happens at most once per thread lifetime]. At do_exit()
+time, the kernel checks this user-space list: are there any robust futex
+locks to be cleaned up?
+
+In the common case, at do_exit() time, there is no list registered, so
+the cost of robust futexes is just a simple current->robust_list != NULL
+comparison. If the thread has registered a list, then normally the list
+is empty. If the thread/process crashed or terminated in some incorrect
+way then the list might be non-empty: in this case the kernel carefully
+walks the list [not trusting it], and marks all locks that are owned by
+this thread with the FUTEX_OWNER_DEAD bit, and wakes up one waiter (if
+any).
+
+The list is guaranteed to be private and per-thread at do_exit() time,
+so it can be accessed by the kernel in a lockless way.
+
+There is one race possible though: since adding to and removing from the
+list is done after the futex is acquired by glibc, there is a few
+instructions window for the thread (or process) to die there, leaving
+the futex hung. To protect against this possibility, userspace (glibc)
+also maintains a simple per-thread 'list_op_pending' field, to allow the
+kernel to clean up if the thread dies after acquiring the lock, but just
+before it could have added itself to the list. Glibc sets this
+list_op_pending field before it tries to acquire the futex, and clears
+it after the list-add (or list-remove) has finished.
+
+That's all that is needed - all the rest of robust-futex cleanup is done
+in userspace [just like with the previous patches].
+
+Ulrich Drepper has implemented the necessary glibc support for this new
+mechanism, which fully enables robust mutexes.
+
+Key differences of this userspace-list based approach, compared to the
+vma based method:
+
+ - it's much, much faster: at thread exit time, there's no need to loop
+   over every vma (!), which the VM-based method has to do. Only a very
+   simple 'is the list empty' op is done.
+
+ - no VM changes are needed - 'struct address_space' is left alone.
+
+ - no registration of individual locks is needed: robust mutexes dont
+   need any extra per-lock syscalls. Robust mutexes thus become a very
+   lightweight primitive - so they dont force the application designer
+   to do a hard choice between performance and robustness - robust
+   mutexes are just as fast.
+
+ - no per-lock kernel allocation happens.
+
+ - no resource limits are needed.
+
+ - no kernel-space recovery call (FUTEX_RECOVER) is needed.
+
+ - the implementation and the locking is "obvious", and there are no
+   interactions with the VM.
+
+Performance
+-----------
+
+I have benchmarked the time needed for the kernel to process a list of 1
+million (!) held locks, using the new method [on a 2GHz CPU]:
+
+ - with FUTEX_WAIT set [contended mutex]: 130 msecs
+ - without FUTEX_WAIT set [uncontended mutex]: 30 msecs
+
+I have also measured an approach where glibc does the lock notification
+[which it currently does for !pshared robust mutexes], and that took 256
+msecs - clearly slower, due to the 1 million FUTEX_WAKE syscalls
+userspace had to do.
+
+(1 million held locks are unheard of - we expect at most a handful of
+locks to be held at a time. Nevertheless it's nice to know that this
+approach scales nicely.)
+
+Implementation details
+----------------------
+
+The patch adds two new syscalls: one to register the userspace list, and
+one to query the registered list pointer:
+
+ asmlinkage long
+ sys_set_robust_list(struct robust_list_head __user *head,
+                     size_t len);
+
+ asmlinkage long
+ sys_get_robust_list(int pid, struct robust_list_head __user **head_ptr,
+                     size_t __user *len_ptr);
+
+List registration is very fast: the pointer is simply stored in
+current->robust_list. [Note that in the future, if robust futexes become
+widespread, we could extend sys_clone() to register a robust-list head
+for new threads, without the need of another syscall.]
+
+So there is virtually zero overhead for tasks not using robust futexes,
+and even for robust futex users, there is only one extra syscall per
+thread lifetime, and the cleanup operation, if it happens, is fast and
+straightforward. The kernel doesnt have any internal distinction between
+robust and normal futexes.
+
+If a futex is found to be held at exit time, the kernel sets the
+following bit of the futex word:
+
+	#define FUTEX_OWNER_DIED        0x40000000
+
+and wakes up the next futex waiter (if any). User-space does the rest of
+the cleanup.
+
+Otherwise, robust futexes are acquired by glibc by putting the TID into
+the futex field atomically. Waiters set the FUTEX_WAITERS bit:
+
+	#define FUTEX_WAITERS           0x80000000
+
+and the remaining bits are for the TID.
+
+Testing, architecture support
+-----------------------------
+
+i've tested the new syscalls on x86 and x86_64, and have made sure the
+parsing of the userspace list is robust [ ;-) ] even if the list is
+deliberately corrupted.
+
+i386 and x86_64 syscalls are wired up at the moment, and Ulrich has
+tested the new glibc code (on x86_64 and i386), and it works for his
+robust-mutex testcases.
+
+All other architectures should build just fine too - but they wont have
+the new syscalls yet.
+
+Architectures need to implement the new futex_atomic_cmpxchg_inatomic()
+inline function before writing up the syscalls (that function returns
+-ENOSYS right now).

Documentation/rpc-cache.txt

@@ -1,4 +1,4 @@
-This document gives a brief introduction to the caching
+	This document gives a brief introduction to the caching
 mechanisms in the sunrpc layer that is used, in particular,
 for NFS authentication.
 
@@ -25,25 +25,17 @@ The common code handles such things as:
    - supporting 'NEGATIVE' as well as positive entries
    - allowing an EXPIRED time on cache items, and removing
      items after they expire, and are no longe in-use.
-
-   Future code extensions are expect to handle
    - making requests to user-space to fill in cache entries
    - allowing user-space to directly set entries in the cache
    - delaying RPC requests that depend on as-yet incomplete
      cache entries, and replaying those requests when the cache entry
      is complete.
-   - maintaining last-access times on cache entries
-   - clean out old entries when the caches become full
-
-The code for performing a cache lookup is also common, but in the form
-of a template.  i.e. a #define.
-Each cache defines a lookup function by using the DefineCacheLookup
-macro, or the simpler DefineSimpleCacheLookup macro
+   - clean out old entries as they expire.
 
 Creating a Cache
 ----------------
 
-1/ A cache needs a datum to cache.  This is in the form of a
+1/ A cache needs a datum to store.  This is in the form of a
    structure definition that must contain a
      struct cache_head
    as an element, usually the first.
@@ -51,35 +43,69 @@ Creating a Cache
    Each cache element is reference counted and contains
    expiry and update times for use in cache management.
 2/ A cache needs a "cache_detail" structure that
-   describes the cache.  This stores the hash table, and some
-   parameters for cache management.
-3/ A cache needs a lookup function.  This is created using
-   the DefineCacheLookup macro.  This lookup function is used both
-   to find entries and to update entries.  The normal mode for
-   updating an entry is to replace the old entry with a new
-   entry.  However it is possible to allow update-in-place
-   for those caches where it makes sense (no atomicity issues
-   or indirect reference counting issue)
-4/ A cache needs to be registered using cache_register().  This
-   includes in on a list of caches that will be regularly
-   cleaned to discard old data.  For this to work, some
-   thread must periodically call cache_clean
-   
+   describes the cache.  This stores the hash table, some
+   parameters for cache management, and some operations detailing how
+   to work with particular cache items.
+   The operations requires are:
+   	struct cache_head *alloc(void)
+		This simply allocates appropriate memory and returns
+   		a pointer to the cache_detail embedded within the
+		structure
+	void cache_put(struct kref *)
+		This is called when the last reference to an item is
+		is dropped.  The pointer passed is to the 'ref' field
+		in the cache_head.  cache_put should release any
+		references create by 'cache_init' and, if CACHE_VALID
+		is set, any references created by cache_update.
+		It should then release the memory allocated by
+   		'alloc'.
+        int match(struct cache_head *orig, struct cache_head *new)
+		test if the keys in the two structures match.  Return
+		1 if they do, 0 if they don't.
+	void init(struct cache_head *orig, struct cache_head *new)
+		Set the 'key' fields in 'new' from 'orig'.  This may
+		include taking references to shared objects.
+	void update(struct cache_head *orig, struct cache_head *new)
+		Set the 'content' fileds in 'new' from 'orig'.
+	int cache_show(struct seq_file *m, struct cache_detail *cd,
+			struct cache_head *h)
+		Optional.  Used to provide a /proc file that lists the
+		contents of a cache.  This should show one item,
+   		usually on just one line.
+	int cache_request(struct cache_detail *cd, struct cache_head *h,
+   		char **bpp, int *blen)
+		Format a request to be send to user-space for an item
+   		to be instantiated.  *bpp is a buffer of size *blen.
+		bpp should be moved forward over the encoded message,
+		and  *blen should be reduced to show how much free
+		space remains.  Return 0 on success or <0 if not
+		enough room or other problem.
+	int cache_parse(struct cache_detail *cd, char *buf, int len)
+		A message from user space has arrived to fill out a
+		cache entry.  It is in 'buf' of length 'len'.
+		cache_parse should parse this, find the item in the
+		cache with sunrpc_cache_lookup, and update the item
+		with sunrpc_cache_update.
+
+
+3/ A cache needs to be registered using cache_register().  This
+   includes it on a list of caches that will be regularly
+   cleaned to discard old data.
+
 Using a cache
 -------------
 
-To find a value in a cache, call the lookup function passing it a the
-datum which contains key, and possibly content, and a flag saying
-whether to update the cache with new data from the datum.   Depending
-on how the cache lookup function was defined, it may take an extra
-argument to identify the particular cache in question.
+To find a value in a cache, call sunrpc_cache_lookup passing a pointer
+to the cache_head in a sample item with the 'key' fields filled in.
+This will be passed to ->match to identify the target entry.  If no
+entry is found, a new entry will be create, added to the cache, and
+marked as not containing valid data.
 
-Except in cases of kmalloc failure, the lookup function
-will return a new datum which will store the key and
-may contain valid content, or may not.
-This datum is typically passed to cache_check which determines the
-validity of the datum and may later initiate an upcall to fill
-in the data.
+The item returned is typically passed to cache_check which will check
+if the data is valid, and may initiate an up-call to get fresh data.
+cache_check will return -ENOENT in the entry is negative or if an up
+call is needed but not possible, -EAGAIN if an upcall is pending,
+or 0 if the data is valid;
 
 cache_check can be passed a "struct cache_req *".  This structure is
 typically embedded in the actual request and can be used to create a
@@ -90,6 +116,13 @@ item does become valid, the deferred copy of the request will be
 revisited (->revisit).  It is expected that this method will
 reschedule the request for processing.
 
+The value returned by sunrpc_cache_lookup can also be passed to
+sunrpc_cache_update to set the content for the item.  A second item is
+passed which should hold the content.  If the item found by _lookup
+has valid data, then it is discarded and a new item is created.  This
+saves any user of an item from worrying about content changing while
+it is being inspected.  If the item found by _lookup does not contain
+valid data, then the content is copied across and CACHE_VALID is set.
 
 Populating a cache
 ------------------
@@ -114,8 +147,8 @@ should be create or updated to have the given content, and the
 expiry time should be set on that item.
 
 Reading from a channel is a bit more interesting.  When a cache
-lookup fail, or when it suceeds but finds an entry that may soon
-expiry, a request is lodged for that cache item to be updated by
+lookup fails, or when it succeeds but finds an entry that may soon
+expire, a request is lodged for that cache item to be updated by
 user-space.  These requests appear in the channel file.
 
 Successive reads will return successive requests.
@@ -130,7 +163,7 @@ Thus a user-space helper is likely to:
     write a response
   loop.
 
-If it dies and needs to be restarted, any requests that have not be
+If it dies and needs to be restarted, any requests that have not been
 answered will still appear in the file and will be read by the new
 instance of the helper.
 
@@ -142,10 +175,9 @@ Each cache should also define a "cache_request" method which
 takes a cache item and encodes a request into the buffer
 provided.
 
-
 Note: If a cache has no active readers on the channel, and has had not
 active readers for more than 60 seconds, further requests will not be
-added to the channel but instead all looks that do not find a valid
+added to the channel but instead all lookups that do not find a valid
 entry will fail.  This is partly for backward compatibility: The
 previous nfs exports table was deemed to be authoritative and a
 failed lookup meant a definite 'no'.
@@ -154,18 +186,17 @@ request/response format
 -----------------------
 
 While each cache is free to use it's own format for requests
-and responses over channel, the following is recommended are
+and responses over channel, the following is recommended as
 appropriate and support routines are available to help:
 Each request or response record should be printable ASCII
 with precisely one newline character which should be at the end.
 Fields within the record should be separated by spaces, normally one.
 If spaces, newlines, or nul characters are needed in a field they
-much be quotes.  two mechanisms are available:
+much be quoted.  two mechanisms are available:
 1/ If a field begins '\x' then it must contain an even number of
    hex digits, and pairs of these digits provide the bytes in the
    field.
 2/ otherwise a \ in the field must be followed by 3 octal digits
    which give the code for a byte.  Other characters are treated
-   as them selves.  At the very least, space, newlines nul, and
+   as them selves.  At the very least, space, newline, nul, and
    '\' must be quoted in this way.
-   

Documentation/serial-console.txt

@@ -17,11 +17,13 @@ The format of this option is:
 			ttyX for any other virtual console
 			ttySx for a serial port
 			lp0 for the first parallel port
+			ttyUSB0 for the first USB serial device
 
 	options:	depend on the driver. For the serial port this
-			defines the baudrate/parity/bits of the port,
-			in the format BBBBPN, where BBBB is the speed,
-			P is parity (n/o/e), and N is bits. Default is
+			defines the baudrate/parity/bits/flow control of
+			the port, in the format BBBBPNF, where BBBB is the
+			speed, P is parity (n/o/e), N is number of bits,
+			and F is flow control ('r' for RTS). Default is
 			9600n8. The maximum baudrate is 115200.
 
 You can specify multiple console= options on the kernel command line.
@@ -45,6 +47,9 @@ become the console.
 You will need to create a new device to use /dev/console. The official
 /dev/console is now character device 5,1.
 
+(You can also use a network device as a console.  See
+Documentation/networking/netconsole.txt for information on that.)
+
 Here's an example that will use /dev/ttyS1 (COM2) as the console.
 Replace the sample values as needed.
 

Documentation/smart-config.txt

@@ -56,10 +56,6 @@ Here is the solution:
     writing one file per option.  It updates only the files for options
     that have changed.
 
-    mkdep.c no longer generates warning messages for missing or unneeded
-    <linux/config.h> lines.  The new top-level target 'make checkconfig'
-    checks for these problems.
-
 Flag Dependencies
 
     Martin Von Loewis contributed another feature to this patch:

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -2836,7 +2836,7 @@ struct _snd_pcm_runtime {
 
         <para>
 	Note that this callback became non-atomic since the recent version.
-	You can use schedule-related fucntions safely in this callback now.
+	You can use schedule-related functions safely in this callback now.
         </para>
 
         <para>

Documentation/sound/oss/Introduction

@@ -69,7 +69,7 @@ are available, for example IRQ, address, DMA.
 
 Warning, the options for different cards sometime use different names 
 for the same or a similar feature (dma1= versus dma16=).  As a last 
-resort, inspect the code (search for MODULE_PARM).
+resort, inspect the code (search for module_param).
 
 Notes:
 

Documentation/sound/oss/cs46xx

@@ -88,7 +88,7 @@ parameters.  for a copy email: twoller@crystal.cirrus.com
 
 MODULE_PARMS definitions
 ------------------------
-MODULE_PARM(defaultorder, "i");
+module_param(defaultorder, ulong, 0);
 defaultorder=N
 where N is a value from 1 to 12
 The buffer order determines the size of the dma buffer for the driver.
@@ -98,18 +98,18 @@ to not underrun the dma buffer as easily.  As default, use 32k (order=3)
 rather than 64k as some of the games work more responsively.
 (2^N) * PAGE_SIZE = allocated buffer size
 
-MODULE_PARM(cs_debuglevel, "i");
-MODULE_PARM(cs_debugmask, "i");
+module_param(cs_debuglevel, ulong, 0644);
+module_param(cs_debugmask, ulong, 0644);
 cs_debuglevel=N
 cs_debugmask=0xMMMMMMMM
 where N is a value from 0 (no debug printfs), to 9 (maximum)
 0xMMMMMMMM is a debug mask corresponding to the CS_xxx bits (see driver source).
 
-MODULE_PARM(hercules_egpio_disable, "i");
+module_param(hercules_egpio_disable, ulong, 0);
 hercules_egpio_disable=N
 where N is a 0 (enable egpio), or a 1 (disable egpio support)
 
-MODULE_PARM(initdelay, "i");
+module_param(initdelay, ulong, 0);
 initdelay=N
 This value is used to determine the millescond delay during the initialization
 code prior to powering up the PLL.  On laptops this value can be used to
@@ -118,19 +118,19 @@ system is booted under battery power then the mdelay()/udelay() functions fail t
 properly delay the required time.  Also, if the system is booted under AC power
 and then the power removed, the mdelay()/udelay() functions will not delay properly.
  
-MODULE_PARM(powerdown, "i");
+module_param(powerdown, ulong, 0);
 powerdown=N
 where N is 0 (disable any powerdown of the internal blocks) or 1 (enable powerdown)
 
 
-MODULE_PARM(external_amp, "i");
+module_param(external_amp, bool, 0);
 external_amp=1
 if N is set to 1, then force enabling the EAPD support in the primary AC97 codec.
 override the detection logic and force the external amp bit in the AC97 0x26 register
 to be reset (0).  EAPD should be 0 for powerup, and 1 for powerdown.  The VTB Santa Cruz
 card has inverted logic, so there is a special function for these cards.
 
-MODULE_PARM(thinkpad, "i");
+module_param(thinkpad, bool, 0);
 thinkpad=1
 if N is set to 1, then force enabling the clkrun functionality.
 Currently, when the part is being used, then clkrun is disabled for the entire system,

Documentation/video4linux/CQcam.txt

@@ -1,7 +1,7 @@
 c-qcam - Connectix Color QuickCam video4linux kernel driver
 
 Copyright (C) 1999  Dave Forrest  <drf5n@virginia.edu>
-                    released under GNU GPL.
+		    released under GNU GPL.
 
 1999-12-08 Dave Forrest, written with kernel version 2.2.12 in mind
 
@@ -45,21 +45,21 @@ configuration.  The appropriate flags are:
     CONFIG_PNP_PARPORT   M for autoprobe.o IEEE1284 readback module
     CONFIG_PRINTER_READBACK M for parport_probe.o IEEE1284 readback module
     CONFIG_VIDEO_DEV     M    for videodev.o video4linux module
-    CONFIG_VIDEO_CQCAM   M    for c-qcam.o  Color Quickcam module 
+    CONFIG_VIDEO_CQCAM   M    for c-qcam.o  Color Quickcam module
 
   With these flags, the kernel should compile and install the modules.
 To record and monitor the compilation, I use:
 
  (make zlilo ; \
   make modules; \
-  make modules_install ; 
+  make modules_install ;
   depmod -a ) &>log &
  less log  # then a capital 'F' to watch the progress
-  
+
 But that is my personal preference.
 
 2.2 Configuration
- 
+
   The configuration requires module configuration and device
 configuration.  I like kmod or kerneld process with the
 /etc/modprobe.conf file so the modules can automatically load/unload as
@@ -68,7 +68,7 @@ using MAKEDEV, or need to be created.  The following sections detail
 these procedures.
 
 
-2.1 Module Configuration  
+2.1 Module Configuration
 
   Using modules requires a bit of work to install and pass the
 parameters.  Understand that entries in /etc/modprobe.conf of:
@@ -128,9 +128,9 @@ system (CONFIG_PROC_FS), the parallel printer support
 (CONFIG_PRINTER), the IEEE 1284 system,(CONFIG_PRINTER_READBACK), you
 should be able to read some identification from your quickcam with
 
-         modprobe -v parport
-         modprobe -v parport_probe
-         cat /proc/parport/PORTNUMBER/autoprobe
+	 modprobe -v parport
+	 modprobe -v parport_probe
+	 cat /proc/parport/PORTNUMBER/autoprobe
 Returns:
   CLASS:MEDIA;
   MODEL:Color QuickCam 2.0;
@@ -140,7 +140,7 @@ Returns:
 and well.  A common problem is that the current driver does not
 reliably detect a c-qcam, even though one is attached.  In this case,
 
-     modprobe -v c-qcam     
+     modprobe -v c-qcam
 or
      insmod -v c-qcam
 
@@ -152,16 +152,16 @@ video4linux mailing list and archive for more current information.
 3.1 Checklist:
 
   Can you get an image?
-            v4lgrab >qcam.ppm ; wc qcam.ppm ; xv qcam.ppm
+	    v4lgrab >qcam.ppm ; wc qcam.ppm ; xv qcam.ppm
 
-  Is a working c-qcam connected to the port? 
-            grep ^ /proc/parport/?/autoprobe
+  Is a working c-qcam connected to the port?
+	    grep ^ /proc/parport/?/autoprobe
 
-  Do the /dev/video* files exist?  
-            ls -lad /dev/video
+  Do the /dev/video* files exist?
+	    ls -lad /dev/video
 
-  Is the c-qcam module loaded?     
-            modprobe -v c-qcam ; lsmod
+  Is the c-qcam module loaded?
+	    modprobe -v c-qcam ; lsmod
 
   Does the camera work with alternate programs? cqcam, etc?
 
@@ -174,7 +174,7 @@ video4linux mailing list and archive for more current information.
 isn't, you might try patching the c-qcam module to add a parport=xxx
 option as in the bw-qcam module so you can specify the parallel port:
 
-       insmod -v c-qcam parport=0  
+       insmod -v c-qcam parport=0
 
 And bypass the detection code, see ../../drivers/char/c-qcam.c and
 look for the 'qc_detect' code and call.
@@ -183,12 +183,12 @@ look for the 'qc_detect' code and call.
 this work is documented at the video4linux2 site listed below.
 
 
-9.0 --- A sample program using v4lgrabber, 
+9.0 --- A sample program using v4lgrabber,
 
 This program is a simple image grabber that will copy a frame from the
 first video device, /dev/video0 to standard output in portable pixmap
 format (.ppm)  Using this like: 'v4lgrab | convert - c-qcam.jpg'
-produced this picture of me at 
+produced this picture of me at
     http://mug.sys.virginia.edu/~drf5n/extras/c-qcam.jpg
 
 -------------------- 8< ---------------- 8< -----------------------------
@@ -202,8 +202,8 @@ produced this picture of me at
  *      Use as:
  *              v4lgrab >image.ppm
  *
- *	Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org>  
- *      Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c 
+ *	Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org>
+ *      Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c
  *      with minor modifications (Dave Forrest, drf5n@virginia.edu).
  *
  */
@@ -225,55 +225,55 @@ produced this picture of me at
 
 #define READ_VIDEO_PIXEL(buf, format, depth, r, g, b)                   \
 {                                                                       \
-        switch (format)                                                 \
-        {                                                               \
-                case VIDEO_PALETTE_GREY:                                \
-                        switch (depth)                                  \
-                        {                                               \
-                                case 4:                                 \
-                                case 6:                                 \
-                                case 8:                                 \
-                                        (r) = (g) = (b) = (*buf++ << 8);\
-                                        break;                          \
-                                                                        \
-                                case 16:                                \
-                                        (r) = (g) = (b) =               \
-                                                *((unsigned short *) buf);      \
-                                        buf += 2;                       \
-                                        break;                          \
-                        }                                               \
-                        break;                                          \
-                                                                        \
-                                                                        \
-                case VIDEO_PALETTE_RGB565:                              \
-                {                                                       \
-                        unsigned short tmp = *(unsigned short *)buf;    \
-                        (r) = tmp&0xF800;                               \
-                        (g) = (tmp<<5)&0xFC00;                          \
-                        (b) = (tmp<<11)&0xF800;                         \
-                        buf += 2;                                       \
-                }                                                       \
-                break;                                                  \
-                                                                        \
-                case VIDEO_PALETTE_RGB555:                              \
-                        (r) = (buf[0]&0xF8)<<8;                         \
-                        (g) = ((buf[0] << 5 | buf[1] >> 3)&0xF8)<<8;    \
-                        (b) = ((buf[1] << 2 ) & 0xF8)<<8;               \
-                        buf += 2;                                       \
-                        break;                                          \
-                                                                        \
-                case VIDEO_PALETTE_RGB24:                               \
-                        (r) = buf[0] << 8; (g) = buf[1] << 8;           \
-                        (b) = buf[2] << 8;                              \
-                        buf += 3;                                       \
-                        break;                                          \
-                                                                        \
-                default:                                                \
-                        fprintf(stderr,                                 \
-                                "Format %d not yet supported\n",        \
-                                format);                                \
-        }                                                               \
-}                                               
+	switch (format)                                                 \
+	{                                                               \
+		case VIDEO_PALETTE_GREY:                                \
+			switch (depth)                                  \
+			{                                               \
+				case 4:                                 \
+				case 6:                                 \
+				case 8:                                 \
+					(r) = (g) = (b) = (*buf++ << 8);\
+					break;                          \
+									\
+				case 16:                                \
+					(r) = (g) = (b) =               \
+						*((unsigned short *) buf);      \
+					buf += 2;                       \
+					break;                          \
+			}                                               \
+			break;                                          \
+									\
+									\
+		case VIDEO_PALETTE_RGB565:                              \
+		{                                                       \
+			unsigned short tmp = *(unsigned short *)buf;    \
+			(r) = tmp&0xF800;                               \
+			(g) = (tmp<<5)&0xFC00;                          \
+			(b) = (tmp<<11)&0xF800;                         \
+			buf += 2;                                       \
+		}                                                       \
+		break;                                                  \
+									\
+		case VIDEO_PALETTE_RGB555:                              \
+			(r) = (buf[0]&0xF8)<<8;                         \
+			(g) = ((buf[0] << 5 | buf[1] >> 3)&0xF8)<<8;    \
+			(b) = ((buf[1] << 2 ) & 0xF8)<<8;               \
+			buf += 2;                                       \
+			break;                                          \
+									\
+		case VIDEO_PALETTE_RGB24:                               \
+			(r) = buf[0] << 8; (g) = buf[1] << 8;           \
+			(b) = buf[2] << 8;                              \
+			buf += 3;                                       \
+			break;                                          \
+									\
+		default:                                                \
+			fprintf(stderr,                                 \
+				"Format %d not yet supported\n",        \
+				format);                                \
+	}                                                               \
+}
 
 int get_brightness_adj(unsigned char *image, long size, int *brightness) {
   long i, tot = 0;
@@ -324,40 +324,40 @@ int main(int argc, char ** argv)
     if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
       vpic.depth=6;
       if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-        vpic.depth=4;
-        if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-          fprintf(stderr, "Unable to find a supported capture format.\n");
-          close(fd);
-          exit(1);
-        }
+	vpic.depth=4;
+	if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
+	  fprintf(stderr, "Unable to find a supported capture format.\n");
+	  close(fd);
+	  exit(1);
+	}
       }
     }
   } else {
     vpic.depth=24;
     vpic.palette=VIDEO_PALETTE_RGB24;
-    
+
     if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
       vpic.palette=VIDEO_PALETTE_RGB565;
       vpic.depth=16;
-      
+
       if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
-        vpic.palette=VIDEO_PALETTE_RGB555;
-        vpic.depth=15;
-        
-        if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
-          fprintf(stderr, "Unable to find a supported capture format.\n");
-          return -1;
-        }
+	vpic.palette=VIDEO_PALETTE_RGB555;
+	vpic.depth=15;
+
+	if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
+	  fprintf(stderr, "Unable to find a supported capture format.\n");
+	  return -1;
+	}
       }
     }
   }
-  
+
   buffer = malloc(win.width * win.height * bpp);
   if (!buffer) {
     fprintf(stderr, "Out of memory.\n");
     exit(1);
   }
-  
+
   do {
     int newbright;
     read(fd, buffer, win.width * win.height * bpp);
@@ -365,8 +365,8 @@ int main(int argc, char ** argv)
     if (f) {
       vpic.brightness += (newbright << 8);
       if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
-        perror("VIDIOSPICT");
-        break;
+	perror("VIDIOSPICT");
+	break;
       }
     }
   } while (f);
@@ -381,7 +381,7 @@ int main(int argc, char ** argv)
     fputc(g>>8, stdout);
     fputc(b>>8, stdout);
   }
-    
+
   close(fd);
   return 0;
 }

Documentation/video4linux/README.cpia

@@ -87,7 +87,7 @@ hardware configuration of the parport. You can give the boot-parameter
 at the LILO-prompt or specify it in lilo.conf. I use the following
 append-line in lilo.conf:
 
-        append="parport=0x378,7,3"
+	append="parport=0x378,7,3"
 
 See Documentation/parport.txt for more information about the
 configuration of the parport and the values given above. Do not simply
@@ -175,7 +175,7 @@ THANKS (in no particular order):
 - Manuel J. Petit de Gabriel <mpetit@dit.upm.es> for providing help
   with Isabel (http://isabel.dit.upm.es/)
 - Bas Huisman <bhuism@cs.utwente.nl> for writing the initial parport code
-- Jarl Totland <Jarl.Totland@bdc.no> for setting up the mailing list 
+- Jarl Totland <Jarl.Totland@bdc.no> for setting up the mailing list
   and maintaining the web-server[3]
 - Chris Whiteford <Chris@informinteractive.com> for fixes related to the
   1.02 firmware

Documentation/video4linux/Zoran

@@ -28,7 +28,7 @@ Iomega Buz:
 * Philips saa7111 TV decoder
 * Philips saa7185 TV encoder
 Drivers to use: videodev, i2c-core, i2c-algo-bit,
-                videocodec, saa7111, saa7185, zr36060, zr36067
+		videocodec, saa7111, saa7185, zr36060, zr36067
 Inputs/outputs: Composite and S-video
 Norms: PAL, SECAM (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
 Card number: 7
@@ -39,7 +39,7 @@ Linux Media Labs LML33:
 * Brooktree bt819 TV decoder
 * Brooktree bt856 TV encoder
 Drivers to use: videodev, i2c-core, i2c-algo-bit,
-                videocodec, bt819, bt856, zr36060, zr36067
+		videocodec, bt819, bt856, zr36060, zr36067
 Inputs/outputs: Composite and S-video
 Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
 Card number: 5
@@ -50,7 +50,7 @@ Linux Media Labs LML33R10:
 * Philips saa7114 TV decoder
 * Analog Devices adv7170 TV encoder
 Drivers to use: videodev, i2c-core, i2c-algo-bit,
-                videocodec, saa7114, adv7170, zr36060, zr36067
+		videocodec, saa7114, adv7170, zr36060, zr36067
 Inputs/outputs: Composite and S-video
 Norms: PAL (720x576 @ 25 fps), NTSC (720x480 @ 29.97 fps)
 Card number: 6
@@ -61,7 +61,7 @@ Pinnacle/Miro DC10(new):
 * Philips saa7110a TV decoder
 * Analog Devices adv7176 TV encoder
 Drivers to use: videodev, i2c-core, i2c-algo-bit,
-                videocodec, saa7110, adv7175, zr36060, zr36067
+		videocodec, saa7110, adv7175, zr36060, zr36067
 Inputs/outputs: Composite, S-video and Internal
 Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
 Card number: 1
@@ -84,7 +84,7 @@ Pinnacle/Miro DC10(old): *
 * Micronas vpx3220a TV decoder
 * mse3000 TV encoder or Analog Devices adv7176 TV encoder *
 Drivers to use: videodev, i2c-core, i2c-algo-bit,
-                videocodec, vpx3220, mse3000/adv7175, zr36050, zr36016, zr36067
+		videocodec, vpx3220, mse3000/adv7175, zr36050, zr36016, zr36067
 Inputs/outputs: Composite, S-video and Internal
 Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
 Card number: 0
@@ -96,7 +96,7 @@ Pinnacle/Miro DC30: *
 * Micronas vpx3225d/vpx3220a/vpx3216b TV decoder
 * Analog Devices adv7176 TV encoder
 Drivers to use: videodev, i2c-core, i2c-algo-bit,
-                videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36016, zr36067
+		videocodec, vpx3220/vpx3224, adv7175, zr36050, zr36016, zr36067
 Inputs/outputs: Composite, S-video and Internal
 Norms: PAL, SECAM (768x576 @ 25 fps), NTSC (640x480 @ 29.97 fps)
 Card number: 3
@@ -123,11 +123,11 @@ Note: use encoder=X or decoder=X for non-default i2c chips (see i2c-id.h)
 
 The best know TV standards are NTSC/PAL/SECAM. but for decoding a frame that
 information is not enough. There are several formats of the TV standards.
-And not every TV decoder is able to handle every format. Also the every 
-combination is supported by the driver. There are currently 11 different 
-tv broadcast formats all aver the world. 
+And not every TV decoder is able to handle every format. Also the every
+combination is supported by the driver. There are currently 11 different
+tv broadcast formats all aver the world.
 
-The CCIR defines parameters needed for broadcasting the signal. 
+The CCIR defines parameters needed for broadcasting the signal.
 The CCIR has defined different standards: A,B,D,E,F,G,D,H,I,K,K1,L,M,N,...
 The CCIR says not much about about the colorsystem used !!!
 And talking about a colorsystem says not to much about how it is broadcast.
@@ -136,18 +136,18 @@ The CCIR standards A,E,F are not used any more.
 
 When you speak about NTSC, you usually mean the standard: CCIR - M using
 the NTSC colorsystem which is used in the USA, Japan, Mexico, Canada
-and a few others. 
+and a few others.
 
 When you talk about PAL, you usually mean: CCIR - B/G using the PAL
-colorsystem which is used in many Countries. 
+colorsystem which is used in many Countries.
 
-When you talk about SECAM, you mean: CCIR - L using the SECAM Colorsystem 
+When you talk about SECAM, you mean: CCIR - L using the SECAM Colorsystem
 which is used in France, and a few others.
 
 There the other version of SECAM, CCIR - D/K is used in Bulgaria, China,
-Slovakai, Hungary, Korea (Rep.), Poland, Rumania and a others. 
+Slovakai, Hungary, Korea (Rep.), Poland, Rumania and a others.
 
-The CCIR - H uses the PAL colorsystem (sometimes SECAM) and is used in 
+The CCIR - H uses the PAL colorsystem (sometimes SECAM) and is used in
 Egypt, Libya, Sri Lanka, Syrain Arab. Rep.
 
 The CCIR - I uses the PAL colorsystem, and is used in Great Britain, Hong Kong,
@@ -158,30 +158,30 @@ and is used in Argentinia, Uruguay, an a few others
 
 We do not talk about how the audio is broadcast !
 
-A rather good sites about the TV standards are: 
+A rather good sites about the TV standards are:
 http://www.sony.jp/ServiceArea/Voltage_map/
 http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/
 and http://www.cabl.com/restaurant/channel.html
 
 Other weird things around: NTSC 4.43 is a modificated NTSC, which is mainly
 used in PAL VCR's that are able to play back NTSC. PAL 60 seems to be the same
-as NTSC 4.43 . The Datasheets also talk about NTSC 44, It seems as if it would 
-be the same as NTSC 4.43. 
+as NTSC 4.43 . The Datasheets also talk about NTSC 44, It seems as if it would
+be the same as NTSC 4.43.
 NTSC Combs seems to be a decoder mode where the decoder uses a comb filter
 to split coma and luma instead of a Delay line.
 
 But I did not defiantly find out what NTSC Comb is.
 
 Philips saa7111 TV decoder
-was introduced in 1997, is used in the BUZ and 
-can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC N, NTSC 4.43 and SECAM 
+was introduced in 1997, is used in the BUZ and
+can handle: PAL B/G/H/I, PAL N, PAL M, NTSC M, NTSC N, NTSC 4.43 and SECAM
 
 Philips saa7110a TV decoder
 was introduced in 1995, is used in the Pinnacle/Miro DC10(new), DC10+ and
-can handle: PAL B/G, NTSC M and SECAM 
+can handle: PAL B/G, NTSC M and SECAM
 
 Philips saa7114 TV decoder
-was introduced in 2000, is used in the LML33R10 and  
+was introduced in 2000, is used in the LML33R10 and
 can handle: PAL B/G/D/H/I/N, PAL N, PAL M, NTSC M, NTSC 4.43 and SECAM
 
 Brooktree bt819 TV decoder
@@ -206,7 +206,7 @@ was introduced in 1996, is used in the BUZ
 can generate: PAL B/G, NTSC M
 
 Brooktree bt856 TV Encoder
-was introduced in 1994, is used in the LML33 
+was introduced in 1994, is used in the LML33
 can generate: PAL B/D/G/H/I/N, PAL M, NTSC M, PAL-N (Argentina)
 
 Analog Devices adv7170 TV Encoder
@@ -221,9 +221,9 @@ ITT mse3000 TV encoder
 was introduced in 1991, is used in the DC10 old
 can generate: PAL , NTSC , SECAM
 
-The adv717x, should be able to produce PAL N. But you find nothing PAL N 
+The adv717x, should be able to produce PAL N. But you find nothing PAL N
 specific in the registers. Seem that you have to reuse a other standard
-to generate PAL N, maybe it would work if you use the PAL M settings. 
+to generate PAL N, maybe it would work if you use the PAL M settings.
 
 ==========================
 
@@ -261,7 +261,7 @@ Here's my experience of using LML33 and Buz on various motherboards:
 
 VIA MVP3
 	Forget it. Pointless. Doesn't work.
-Intel 430FX (Pentium 200) 
+Intel 430FX (Pentium 200)
 	LML33 perfect, Buz tolerable (3 or 4 frames dropped per movie)
 Intel 440BX (early stepping)
 	LML33 tolerable. Buz starting to get annoying (6-10 frames/hour)
@@ -438,52 +438,52 @@ importance of buffer sizes:
 > -q 25 -b 128 : 24.655.992
 > -q 25 -b 256 : 25.859.820
 
-I woke up, and can't go to sleep again. I'll kill some time explaining why 
+I woke up, and can't go to sleep again. I'll kill some time explaining why
 this doesn't look strange to me.
 
-Let's do some math using a width of 704 pixels. I'm not sure whether the Buz 
+Let's do some math using a width of 704 pixels. I'm not sure whether the Buz
 actually use that number or not, but that's not too important right now.
 
-704x288 pixels, one field, is 202752 pixels. Divided by 64 pixels per block; 
-3168 blocks per field. Each pixel consist of two bytes; 128 bytes per block; 
-1024 bits per block. 100% in the new driver mean 1:2 compression; the maximum 
-output becomes 512 bits per block. Actually 510, but 512 is simpler to use 
+704x288 pixels, one field, is 202752 pixels. Divided by 64 pixels per block;
+3168 blocks per field. Each pixel consist of two bytes; 128 bytes per block;
+1024 bits per block. 100% in the new driver mean 1:2 compression; the maximum
+output becomes 512 bits per block. Actually 510, but 512 is simpler to use
 for calculations.
 
-Let's say that we specify d1q50. We thus want 256 bits per block; times 3168 
-becomes 811008 bits; 101376 bytes per field. We're talking raw bits and bytes 
-here, so we don't need to do any fancy corrections for bits-per-pixel or such 
+Let's say that we specify d1q50. We thus want 256 bits per block; times 3168
+becomes 811008 bits; 101376 bytes per field. We're talking raw bits and bytes
+here, so we don't need to do any fancy corrections for bits-per-pixel or such
 things. 101376 bytes per field.
 
-d1 video contains two fields per frame. Those sum up to 202752 bytes per 
+d1 video contains two fields per frame. Those sum up to 202752 bytes per
 frame, and one of those frames goes into each buffer.
 
-But wait a second! -b128 gives 128kB buffers! It's not possible to cram 
+But wait a second! -b128 gives 128kB buffers! It's not possible to cram
 202752 bytes of JPEG data into 128kB!
 
-This is what the driver notice and automatically compensate for in your 
+This is what the driver notice and automatically compensate for in your
 examples. Let's do some math using this information:
 
-128kB is 131072 bytes. In this buffer, we want to store two fields, which 
-leaves 65536 bytes for each field. Using 3168 blocks per field, we get 
-20.68686868... available bytes per block; 165 bits. We can't allow the 
-request for 256 bits per block when there's only 165 bits available! The -q50 
-option is silently overridden, and the -b128 option takes precedence, leaving 
+128kB is 131072 bytes. In this buffer, we want to store two fields, which
+leaves 65536 bytes for each field. Using 3168 blocks per field, we get
+20.68686868... available bytes per block; 165 bits. We can't allow the
+request for 256 bits per block when there's only 165 bits available! The -q50
+option is silently overridden, and the -b128 option takes precedence, leaving
 us with the equivalence of -q32.
 
-This gives us a data rate of 165 bits per block, which, times 3168, sums up 
-to 65340 bytes per field, out of the allowed 65536. The current driver has 
-another level of rate limiting; it won't accept -q values that fill more than 
-6/8 of the specified buffers. (I'm not sure why. "Playing it safe" seem to be 
-a safe bet. Personally, I think I would have lowered requested-bits-per-block 
-by one, or something like that.) We can't use 165 bits per block, but have to 
-lower it again, to 6/8 of the available buffer space: We end up with 124 bits 
-per block, the equivalence of -q24. With 128kB buffers, you can't use greater 
+This gives us a data rate of 165 bits per block, which, times 3168, sums up
+to 65340 bytes per field, out of the allowed 65536. The current driver has
+another level of rate limiting; it won't accept -q values that fill more than
+6/8 of the specified buffers. (I'm not sure why. "Playing it safe" seem to be
+a safe bet. Personally, I think I would have lowered requested-bits-per-block
+by one, or something like that.) We can't use 165 bits per block, but have to
+lower it again, to 6/8 of the available buffer space: We end up with 124 bits
+per block, the equivalence of -q24. With 128kB buffers, you can't use greater
 than -q24 at -d1. (And PAL, and 704 pixels width...)
 
-The third example is limited to -q24 through the same process. The second 
-example, using very similar calculations, is limited to -q48. The only 
-example that actually grab at the specified -q value is the last one, which 
+The third example is limited to -q24 through the same process. The second
+example, using very similar calculations, is limited to -q48. The only
+example that actually grab at the specified -q value is the last one, which
 is clearly visible, looking at the file size.
 --
 

Documentation/video4linux/bttv/ICs

@@ -14,13 +14,13 @@ Hauppauge Win/TV pci (version 405):
 
 Microchip 24LC02B or
 Philips 8582E2Y: 256 Byte EEPROM with configuration information
-                 I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf)
+		 I2C 0xa0-0xa1, (24LC02B also responds to 0xa2-0xaf)
 Philips SAA5246AGP/E: Videotext decoder chip, I2C 0x22-0x23
 TDA9800: sound decoder
 Winbond W24257AS-35: 32Kx8 CMOS static RAM (Videotext buffer mem)
 14052B: analog switch for selection of sound source
 
-PAL: 
+PAL:
 TDA5737: VHF, hyperband and UHF mixer/oscillator for TV and VCR 3-band tuners
 TSA5522: 1.4 GHz I2C-bus controlled synthesizer, I2C 0xc2-0xc3
 

Documentation/video4linux/bttv/PROBLEMS

@@ -3,7 +3,7 @@
 - Start capturing by pressing "c" or by selecting it via a menu!!!
 
 - The memory of some S3 cards is not recognized right:
-  
+
   First of all, if you are not using XFree-3.2 or newer, upgrade AT LEAST to
   XFree-3.2A! This solved the problem for most people.
 
@@ -31,23 +31,23 @@
   (mostly with Trio 64 but also with some others)
   Get the free demo version of Accelerated X from www.xinside.com and try
   bttv with it. bttv seems to work with most S3 cards with Accelerated X.
-  
+
   Since I do not know much (better make that almost nothing) about VGA card
   programming I do not know the reason for this.
   Looks like XFree does something different when setting up the video memory?
-  Maybe somebody can enlighten me?  
-  Would be nice if somebody could get this to work with XFree since 
-  Accelerated X costs more than some of the grabber cards ... 
- 
+  Maybe somebody can enlighten me?
+  Would be nice if somebody could get this to work with XFree since
+  Accelerated X costs more than some of the grabber cards ...
+
   Better linear frame buffer support for S3 cards will probably be in
   XFree 4.0.
-  
+
 - Grabbing is not switched off when changing consoles with XFree.
   That's because XFree and some AcceleratedX versions do not send unmap
   events.
 
 - Some popup windows (e.g. of the window manager) are not refreshed.
-  
+
   Disable backing store by starting X with the option "-bs"
 
 - When using 32 bpp in XFree or 24+8bpp mode in AccelX 3.1 the system

Documentation/video4linux/bttv/README.quirks

@@ -38,9 +38,9 @@ tolerate.
 ------------------------
 
 When using the 430FX PCI, the following rules will ensure
-compatibility: 
+compatibility:
 
- (1) Deassert REQ at the same time as asserting FRAME. 
+ (1) Deassert REQ at the same time as asserting FRAME.
  (2) Do not reassert REQ to request another bus transaction until after
      finish-ing the previous transaction.
 

Documentation/video4linux/bttv/THANKS

@@ -1,6 +1,6 @@
 Many thanks to:
 
-- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848 
+- Markus Schroeder <schroedm@uni-duesseldorf.de> for information on the Bt848
   and tuner programming and his control program xtvc.
 
 - Martin Buck <martin-2.buck@student.uni-ulm.de> for his great Videotext
@@ -16,7 +16,7 @@ Many thanks to:
 - MIRO for providing a free PCTV card and detailed information about the
   components on their cards. (E.g. how the tuner type is detected)
   Without their card I could not have debugged the NTSC mode.
-	
+
 - Hauppauge for telling how the sound input is selected and what components
   they do and will use on their radio cards.
   Also many thanks for faxing me the FM1216 data sheet.

Documentation/video4linux/radiotrack.txt

@@ -131,17 +131,17 @@ Check Stereo:   BASE <-- 0xd8  (current volume, stereo detect,
 		x=0xff ==> "not stereo", x=0xfd ==> "stereo detected"
 
 Set Frequency:  code = (freq*40) + 10486188
-                foreach of the 24 bits in code,
-                (from Least to Most Significant):
-                  to write a "zero" bit,
-                    BASE <-- 0x01  (audio mute, no stereo detect, radio
+		foreach of the 24 bits in code,
+		(from Least to Most Significant):
+		  to write a "zero" bit,
+		    BASE <-- 0x01  (audio mute, no stereo detect, radio
 				    disable, "zero" bit phase 1, tuner adjust)
-                    BASE <-- 0x03  (audio mute, no stereo detect, radio
+		    BASE <-- 0x03  (audio mute, no stereo detect, radio
 				    disable, "zero" bit phase 2, tuner adjust)
-                  to write a "one" bit,
-                    BASE <-- 0x05  (audio mute, no stereo detect, radio
+		  to write a "one" bit,
+		    BASE <-- 0x05  (audio mute, no stereo detect, radio
 				    disable, "one" bit phase 1, tuner adjust)
-                    BASE <-- 0x07  (audio mute, no stereo detect, radio
+		    BASE <-- 0x07  (audio mute, no stereo detect, radio
 				    disable, "one" bit phase 2, tuner adjust)
 
 ----------------------------------------------------------------------------

Documentation/video4linux/w9966.txt

@@ -26,7 +26,7 @@ is called VIDEO_PALETTE_YUV422 (16 bpp).
 A minimal test application (with source) is available from:
   http://hem.fyristorg.com/mogul/w9966.html
 
-The slow framerate is due to missing DMA ECP read support in the 
+The slow framerate is due to missing DMA ECP read support in the
 parport drivers. I might add working EPP support later.
 
 Good luck!

Documentation/video4linux/zr36120.txt

@@ -2,7 +2,7 @@ Driver for Trust Computer Products Framegrabber, version 0.6.1
 ------ --- ----- -------- -------- ------------  ------- - - -
 
 - ZORAN ------------------------------------------------------
- Author: Pauline Middelink <middelin@polyware.nl> 
+ Author: Pauline Middelink <middelin@polyware.nl>
    Date: 18 September 1999
 Version: 0.6.1
 
@@ -115,7 +115,7 @@ After making/checking the devices do:
 <n> is the cardtype of the card you have. The cardnumber can
 be found in the source of zr36120. Look for tvcards. If your
 card is not there, please try if any other card gives some
-response, and mail me if you got a working tvcard addition. 
+response, and mail me if you got a working tvcard addition.
 
 PS. <TVCard editors behold!)
     Dont forget to set video_input to the number of inputs

MAINTAINERS

@@ -147,6 +147,18 @@ M:	p_gortmaker@yahoo.com
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+9P FILE SYSTEM
+P:      Eric Van Hensbergen
+M:      ericvh@gmail.com
+P:      Ron Minnich
+M:      rminnich@lanl.gov
+P:      Latchesar Ionkov
+M:      lucho@ionkov.net
+L:      v9fs-developer@lists.sourceforge.net
+W:      http://v9fs.sf.net
+T:      git kernel.org:/pub/scm/linux/kernel/ericvh/v9fs.git
+S:      Maintained
+
 A2232 SERIAL BOARD DRIVER
 P:	Enver Haase
 M:	ehaase@inf.fu-berlin.de
@@ -870,13 +882,34 @@ W:	http://ebtables.sourceforge.net/
 S:	Maintained
 
 EDAC-CORE
-P:      Doug Thompson
-M:      norsk5@xmission.com, dthompson@linuxnetworx.com
-P:      Dave Peterson
-M:      dsp@llnl.gov, dave_peterson@pobox.com
-L:      bluesmoke-devel@lists.sourceforge.net
-W:      bluesmoke.sourceforge.net
-S:      Maintained
+P:	Doug Thompson
+M:	norsk5@xmission.com, dthompson@linuxnetworx.com
+P:	Dave Peterson
+M:	dsp@llnl.gov, dave_peterson@pobox.com
+L:	bluesmoke-devel@lists.sourceforge.net
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+
+EDAC-E752X
+P:	Dave Peterson
+M:	dsp@llnl.gov, dave_peterson@pobox.com
+L:	bluesmoke-devel@lists.sourceforge.net
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+
+EDAC-E7XXX
+P:	Dave Peterson
+M:	dsp@llnl.gov, dave_peterson@pobox.com
+L:	bluesmoke-devel@lists.sourceforge.net
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+
+EDAC-R82600
+P:	Tim Small
+M:	tim@buttersideup.com
+L:	bluesmoke-devel@lists.sourceforge.net
+W:	bluesmoke.sourceforge.net
+S:	Maintained
 
 EEPRO100 NETWORK DRIVER
 P:	Andrey V. Savochkin
@@ -1027,6 +1060,15 @@ M:	khc@pm.waw.pl
 W:	http://www.kernel.org/pub/linux/utils/net/hdlc/
 S:	Maintained
 
+GIGASET ISDN DRIVERS
+P:	Hansjoerg Lipp
+M:	hjlipp@web.de
+P:	Tilman Schmidt
+M:	tilman@imap.cc
+L:	gigaset307x-common@lists.sourceforge.net
+W:	http://gigaset307x.sourceforge.net/
+S:	Maintained
+
 HARDWARE MONITORING
 P:	Jean Delvare
 M:	khali@linux-fr.org
@@ -1843,6 +1885,7 @@ NETWORKING [GENERAL]
 P:	Networking Team
 M:	netdev@vger.kernel.org
 L:	netdev@vger.kernel.org
+W:	http://linux-net.osdl.org/
 S:	Maintained
 
 NETWORKING [IPv4/IPv6]
@@ -2013,12 +2056,6 @@ L:	parisc-linux@parisc-linux.org
 W:	http://www.parisc-linux.org/
 S:	Maintained
 
-PERSONALITY HANDLING
-P:	Christoph Hellwig
-M:	hch@infradead.org
-L:	linux-abi-devel@lists.sourceforge.net
-S:	Maintained
-
 PCI ERROR RECOVERY
 P:	Linas Vepstas
 M:	linas@austin.ibm.com
@@ -2069,6 +2106,12 @@ M:	tsbogend@alpha.franken.de
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+PERSONALITY HANDLING
+P:	Christoph Hellwig
+M:	hch@infradead.org
+L:	linux-abi-devel@lists.sourceforge.net
+S:	Maintained
+
 PHRAM MTD DRIVER
 P:	Jörn Engel
 M:	joern@wh.fh-wedel.de
@@ -2191,6 +2234,12 @@ M:	p_gortmaker@yahoo.com
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
+REAL TIME CLOCK (RTC) SUBSYSTEM
+P:	Alessandro Zummo
+M:	a.zummo@towertech.it
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 REISERFS FILE SYSTEM
 P:	Hans Reiser
 M:	reiserfs-dev@namesys.com
@@ -2212,13 +2261,6 @@ S:	Maintained
 RISCOM8 DRIVER
 S:	Orphan
 
-RTLINUX  REALTIME  LINUX
-P:	Victor Yodaiken
-M:	yodaiken@fsmlabs.com
-L:	rtl@rtlinux.org
-W:	www.rtlinux.org
-S:	Maintained
-
 S3 SAVAGE FRAMEBUFFER DRIVER
 P:      Antonino Daplas
 M:      adaplas@pol.net
@@ -2531,7 +2573,6 @@ S:	Unsupported ?
 STRADIS MPEG-2 DECODER DRIVER
 P:	Nathan Laredo
 M:	laredo@gnu.org
-W:	http://mpeg.openprojects.net/
 W:	http://www.stradis.com/
 S:	Maintained
 
@@ -2650,7 +2691,7 @@ S:	Maintained
 
 TUN/TAP driver
 P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com, max_mk@yahoo.com
+M:	maxk@qualcomm.com
 L:	vtun@office.satix.net
 W:	http://vtun.sourceforge.net/tun
 S:	Maintained
@@ -2979,18 +3020,6 @@ L:	rio500-users@lists.sourceforge.net
 W:	http://rio500.sourceforge.net
 S:	Maintained
 
-V9FS FILE SYSTEM
-P:      Eric Van Hensbergen
-M:      ericvh@gmail.com
-P:      Ron Minnich
-M:      rminnich@lanl.gov
-P:      Latchesar Ionkov
-M:      lucho@ionkov.net
-L:      v9fs-developer@lists.sourceforge.net
-W:      http://v9fs.sf.net
-T:      git kernel.org:/pub/scm/linux/kernel/ericvh/v9fs-devel.git
-S:      Maintained
-
 VIDEO FOR LINUX
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org

Makefile

@@ -95,7 +95,7 @@ ifdef O
 endif
 
 # That's our default target when none is given on the command line
-.PHONY: _all
+PHONY := _all
 _all:
 
 ifneq ($(KBUILD_OUTPUT),)
@@ -106,7 +106,7 @@ KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
 $(if $(KBUILD_OUTPUT),, \
      $(error output directory "$(saved-output)" does not exist))
 
-.PHONY: $(MAKECMDGOALS)
+PHONY += $(MAKECMDGOALS)
 
 $(filter-out _all,$(MAKECMDGOALS)) _all:
 	$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
@@ -123,7 +123,7 @@ ifeq ($(skip-makefile),)
 
 # If building an external module we do not care about the all: rule
 # but instead _all depend on modules
-.PHONY: all
+PHONY += all
 ifeq ($(KBUILD_EXTMOD),)
 _all: all
 else
@@ -137,7 +137,7 @@ objtree		:= $(CURDIR)
 src		:= $(srctree)
 obj		:= $(objtree)
 
-VPATH		:= $(srctree)
+VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
 export srctree objtree VPATH TOPDIR
 
@@ -151,7 +151,7 @@ export srctree objtree VPATH TOPDIR
 SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/arm.*/arm/ -e s/sa110/arm/ \
 				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
-				  -e s/ppc.*/powerpc/ )
+				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------
@@ -258,38 +258,6 @@ endif
 
 export quiet Q KBUILD_VERBOSE
 
-######
-# cc support functions to be used (only) in arch/$(ARCH)/Makefile
-# See documentation in Documentation/kbuild/makefiles.txt
-
-# as-option
-# Usage: cflags-y += $(call as-option, -Wa$(comma)-isa=foo,)
-
-as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \
-	     -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \
-	     else echo "$(2)"; fi ;)
-
-# cc-option
-# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
-
-cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
-             > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
-
-# cc-option-yn
-# Usage: flag := $(call cc-option-yn, -march=winchip-c6)
-cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
-                > /dev/null 2>&1; then echo "y"; else echo "n"; fi;)
-
-# cc-option-align
-# Prefix align with either -falign or -malign
-cc-option-align = $(subst -functions=0,,\
-	$(call cc-option,-falign-functions=0,-malign-functions=0))
-
-# cc-version
-# Usage gcc-ver := $(call cc-version $(CC))
-cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
-              $(if $(1), $(1), $(CC)))
-
 
 # Look for make include files relative to root of kernel src
 MAKEFLAGS += --include-dir=$(srctree)
@@ -338,8 +306,7 @@ LINUXINCLUDE    := -Iinclude \
 CPPFLAGS        := -D__KERNEL__ $(LINUXINCLUDE)
 
 CFLAGS 		:= -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-	  	   -fno-strict-aliasing -fno-common \
-		   -ffreestanding
+	  	   -fno-strict-aliasing -fno-common
 AFLAGS		:= -D__ASSEMBLY__
 
 # Read KERNELRELEASE from .kernelrelease (if it exists)
@@ -369,14 +336,14 @@ export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exc
 # Rules shared between *config targets and build targets
 
 # Basic helpers built in scripts/
-.PHONY: scripts_basic
+PHONY += scripts_basic
 scripts_basic:
 	$(Q)$(MAKE) $(build)=scripts/basic
 
 # To avoid any implicit rule to kick in, define an empty command.
 scripts/basic/%: scripts_basic ;
 
-.PHONY: outputmakefile
+PHONY += outputmakefile
 # outputmakefile generate a Makefile to be placed in output directory, if
 # using a seperate output directory. This allows convinient use
 # of make in output directory
@@ -452,7 +419,7 @@ ifeq ($(KBUILD_EXTMOD),)
 # Additional helpers built in scripts/
 # Carefully list dependencies so we do not try to build scripts twice
 # in parrallel
-.PHONY: scripts
+PHONY += scripts
 scripts: scripts_basic include/config/MARKER
 	$(Q)$(MAKE) $(build)=$(@)
 
@@ -504,13 +471,6 @@ else
 CFLAGS		+= -O2
 endif
 
-#Add align options if CONFIG_CC_* is not equal to 0
-add-align = $(if $(filter-out 0,$($(1))),$(cc-option-align)$(2)=$($(1)))
-CFLAGS		+= $(call add-align,CONFIG_CC_ALIGN_FUNCTIONS,-functions)
-CFLAGS		+= $(call add-align,CONFIG_CC_ALIGN_LABELS,-labels)
-CFLAGS		+= $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops)
-CFLAGS		+= $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps)
-
 ifdef CONFIG_FRAME_POINTER
 CFLAGS		+= -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
 else
@@ -756,7 +716,7 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
 # make menuconfig etc.
 # Error messages still appears in the original language
 
-.PHONY: $(vmlinux-dirs)
+PHONY += $(vmlinux-dirs)
 $(vmlinux-dirs): prepare scripts
 	$(Q)$(MAKE) $(build)=$@
 
@@ -809,10 +769,10 @@ kernelrelease = $(KERNELVERSION)$(localver-full)
 # version.h and scripts_basic is processed / created.
 
 # Listed in dependency order
-.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3
+PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
 
 # prepare-all is deprecated, use prepare as valid replacement
-.PHONY: prepare-all
+PHONY += prepare-all
 
 # prepare3 is used to check if we are building in a separate output directory,
 # and if so do:
@@ -853,27 +813,6 @@ prepare prepare-all: prepare0
 
 export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
 
-# Single targets
-# ---------------------------------------------------------------------------
-
-%.s: %.c scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%.i: %.c scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%.o: %.c scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%.ko: scripts FORCE
-	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o)
-	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
-%/:      scripts prepare FORCE
-	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D)
-%.lst: %.c scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%.s: %.S scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-%.o: %.S scripts FORCE
-	$(Q)$(MAKE) $(build)=$(@D) $@
-
 # 	FIXME: The asm symlink changes when $(ARCH) changes. That's
 #	hard to detect, but I suppose "make mrproper" is a good idea
 #	before switching between archs anyway.
@@ -914,7 +853,7 @@ include/linux/version.h: $(srctree)/Makefile .config .kernelrelease FORCE
 
 # ---------------------------------------------------------------------------
 
-.PHONY: depend dep
+PHONY += depend dep
 depend dep:
 	@echo '*** Warning: make $@ is unnecessary now.'
 
@@ -929,21 +868,21 @@ all: modules
 
 #	Build modules
 
-.PHONY: modules
+PHONY += modules
 modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
 	@echo '  Building modules, stage 2.';
 	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
 
 
 # Target to prepare building external modules
-.PHONY: modules_prepare
+PHONY += modules_prepare
 modules_prepare: prepare scripts
 
 # Target to install modules
-.PHONY: modules_install
+PHONY += modules_install
 modules_install: _modinst_ _modinst_post
 
-.PHONY: _modinst_
+PHONY += _modinst_
 _modinst_:
 	@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
 		echo "Warning: you may need to install module-init-tools"; \
@@ -970,7 +909,7 @@ depmod_opts	:=
 else
 depmod_opts	:= -b $(INSTALL_MOD_PATH) -r
 endif
-.PHONY: _modinst_post
+PHONY += _modinst_post
 _modinst_post: _modinst_
 	if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
 
@@ -1013,7 +952,7 @@ clean: rm-dirs  := $(CLEAN_DIRS)
 clean: rm-files := $(CLEAN_FILES)
 clean-dirs      := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
 
-.PHONY: $(clean-dirs) clean archclean
+PHONY += $(clean-dirs) clean archclean
 $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
@@ -1031,7 +970,7 @@ mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
 mrproper-dirs      := $(addprefix _mrproper_,Documentation/DocBook scripts)
 
-.PHONY: $(mrproper-dirs) mrproper archmrproper
+PHONY += $(mrproper-dirs) mrproper archmrproper
 $(mrproper-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
 
@@ -1041,7 +980,7 @@ mrproper: clean archmrproper $(mrproper-dirs)
 
 # distclean
 #
-.PHONY: distclean
+PHONY += distclean
 
 distclean: mrproper
 	@find $(srctree) $(RCS_FIND_IGNORE) \
@@ -1057,12 +996,10 @@ distclean: mrproper
 # rpm target kept for backward compatibility
 package-dir	:= $(srctree)/scripts/package
 
-.PHONY: %-pkg rpm
-
 %pkg: FORCE
-	$(Q)$(MAKE) -f $(package-dir)/Makefile $@
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
 rpm: FORCE
-	$(Q)$(MAKE) -f $(package-dir)/Makefile $@
+	$(Q)$(MAKE) $(build)=$(package-dir) $@
 
 
 # Brief documentation of the typical targets used
@@ -1094,13 +1031,11 @@ help:
 	@echo  '  kernelversion	  - Output the version stored in Makefile'
 	@echo  ''
 	@echo  'Static analysers'
-	@echo  '  buildcheck      - List dangling references to vmlinux discarded sections'
-	@echo  '                    and init sections from non-init sections'
 	@echo  '  checkstack      - Generate a list of stack hogs'
 	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
 	@echo  ''
 	@echo  'Kernel packaging:'
-	@$(MAKE) -f $(package-dir)/Makefile help
+	@$(MAKE) $(build)=$(package-dir) help
 	@echo  ''
 	@echo  'Documentation targets:'
 	@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
@@ -1149,11 +1084,12 @@ else # KBUILD_EXTMOD
 
 # We are always building modules
 KBUILD_MODULES := 1
-.PHONY: crmodverdir
+PHONY += crmodverdir
 crmodverdir:
+	$(Q)rm -rf $(MODVERDIR)
 	$(Q)mkdir -p $(MODVERDIR)
 
-.PHONY: $(objtree)/Module.symvers
+PHONY += $(objtree)/Module.symvers
 $(objtree)/Module.symvers:
 	@test -e $(objtree)/Module.symvers || ( \
 	echo; \
@@ -1162,7 +1098,7 @@ $(objtree)/Module.symvers:
 	echo )
 
 module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
-.PHONY: $(module-dirs) modules
+PHONY += $(module-dirs) modules
 $(module-dirs): crmodverdir $(objtree)/Module.symvers
 	$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
 
@@ -1170,13 +1106,32 @@ modules: $(module-dirs)
 	@echo '  Building modules, stage 2.';
 	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
 
-.PHONY: modules_install
-modules_install:
+PHONY += modules_install
+modules_install: _emodinst_ _emodinst_post
+
+install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra)
+PHONY += _emodinst_
+_emodinst_:
+	$(Q)rm -rf $(MODLIB)/$(install-dir)
+	$(Q)mkdir -p $(MODLIB)/$(install-dir)
 	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
 
+# Run depmod only is we have System.map and depmod is executable
+quiet_cmd_depmod = DEPMOD  $(KERNELRELEASE)
+      cmd_depmod = if [ -r System.map -a -x $(DEPMOD) ]; then \
+                      $(DEPMOD) -ae -F System.map             \
+                      $(if $(strip $(INSTALL_MOD_PATH)),      \
+		      -b $(INSTALL_MOD_PATH) -r)              \
+		      $(KERNELRELEASE);                       \
+                   fi
+
+PHONY += _emodinst_post
+_emodinst_post: _emodinst_
+	$(call cmd,depmod)
+
 clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
 
-.PHONY: $(clean-dirs) clean
+PHONY += $(clean-dirs) clean
 $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
@@ -1196,6 +1151,11 @@ help:
 	@echo  '  modules_install - install the module'
 	@echo  '  clean           - remove generated files in module directory only'
 	@echo  ''
+
+# Dummies...
+PHONY += prepare scripts
+prepare: ;
+scripts: ;
 endif # KBUILD_EXTMOD
 
 # Generate tags for editors
@@ -1296,17 +1256,13 @@ versioncheck:
 		-name '*.[hcS]' -type f -print | sort \
 		| xargs $(PERL) -w scripts/checkversion.pl
 
-buildcheck:
-	$(PERL) $(srctree)/scripts/reference_discarded.pl
-	$(PERL) $(srctree)/scripts/reference_init.pl
-
 namespacecheck:
 	$(PERL) $(srctree)/scripts/namespace.pl
 
 endif #ifeq ($(config-targets),1)
 endif #ifeq ($(mixed-targets),1)
 
-.PHONY: checkstack
+PHONY += checkstack
 checkstack:
 	$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
 	$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
@@ -1317,6 +1273,44 @@ kernelrelease:
 kernelversion:
 	@echo $(KERNELVERSION)
 
+# Single targets
+# ---------------------------------------------------------------------------
+# The directory part is taken from first prerequisite, so this
+# works even with external modules
+%.s: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+	$(Q)$(MAKE) $(build)=$(dir $<) $(dir $<)$(notdir $@)
+
+# For external modules we shall include any directory of the target,
+# but usual case there is no directory part.
+# make M=`pwd` module.o     => $(dir $@)=./
+# make M=`pwd` foo/module.o => $(dir $@)=foo/
+# make M=`pwd` /            => $(dir $@)=/
+ 
+ifeq ($(KBUILD_EXTMOD),)
+        target-dir = $(@D)
+else
+        zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+        target-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+endif
+
+/ %/:      scripts prepare FORCE
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+	$(build)=$(target-dir)
+%.ko: scripts FORCE
+	$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
+	$(build)=$(target-dir) $(@:.ko=.o)
+	$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
+
 # FIXME Should go into a make.lib or something 
 # ===========================================================================
 
@@ -1351,4 +1345,10 @@ clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
 
 endif	# skip-makefile
 
+PHONY += FORCE
 FORCE:
+
+
+# Declare the contents of the .PHONY variable as phony.  We keep that
+# information in a variable se we can use it in if_changed and friends.
+.PHONY: $(PHONY)

arch/alpha/Kconfig

@@ -25,6 +25,10 @@ config RWSEM_XCHGADD_ALGORITHM
 	bool
 	default y
 
+config GENERIC_FIND_NEXT_BIT
+	bool
+	default y
+
 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
@@ -447,6 +451,10 @@ config ALPHA_IRONGATE
 	depends on ALPHA_NAUTILUS
 	default y
 
+config GENERIC_HWEIGHT
+	bool
+	default y if !ALPHA_EV6 && !ALPHA_EV67
+
 config ALPHA_AVANTI
 	bool
 	depends on ALPHA_XL || ALPHA_AVANTI_CH

arch/alpha/kernel/osf_sys.c

@@ -821,7 +821,6 @@ osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes,
    affects all sorts of things, like timeval and itimerval.  */
 
 extern struct timezone sys_tz;
-extern int do_adjtimex(struct timex *);
 
 struct timeval32
 {

arch/alpha/kernel/setup.c

@@ -34,6 +34,7 @@
 #include <linux/root_dev.h>
 #include <linux/initrd.h>
 #include <linux/eisa.h>
+#include <linux/pfn.h>
 #ifdef CONFIG_MAGIC_SYSRQ
 #include <linux/sysrq.h>
 #include <linux/reboot.h>
@@ -42,7 +43,7 @@
 #include <asm/setup.h>
 #include <asm/io.h>
 
-extern struct notifier_block *panic_notifier_list;
+extern struct atomic_notifier_head panic_notifier_list;
 static int alpha_panic_event(struct notifier_block *, unsigned long, void *);
 static struct notifier_block alpha_panic_block = {
 	alpha_panic_event,
@@ -241,9 +242,6 @@ reserve_std_resources(void)
 		request_resource(io, standard_io_resources+i);
 }
 
-#define PFN_UP(x)	(((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x)	((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x)	((x) << PAGE_SHIFT)
 #define PFN_MAX		PFN_DOWN(0x80000000)
 #define for_each_mem_cluster(memdesc, cluster, i)		\
 	for ((cluster) = (memdesc)->cluster, (i) = 0;		\
@@ -472,11 +470,6 @@ page_is_ram(unsigned long pfn)
 	return 0;
 }
 
-#undef PFN_UP
-#undef PFN_DOWN
-#undef PFN_PHYS
-#undef PFN_MAX
-
 void __init
 setup_arch(char **cmdline_p)
 {
@@ -507,7 +500,8 @@ setup_arch(char **cmdline_p)
 	}
 
 	/* Register a call for panic conditions. */
-	notifier_chain_register(&panic_notifier_list, &alpha_panic_block);
+	atomic_notifier_chain_register(&panic_notifier_list,
+			&alpha_panic_block);
 
 #ifdef CONFIG_ALPHA_GENERIC
 	/* Assume that we've booted from SRM if we haven't booted from MILO.

arch/alpha/kernel/time.c

@@ -314,10 +314,11 @@ time_init(void)
 	if (!est_cycle_freq)
 		est_cycle_freq = validate_cc_value(calibrate_cc_with_pit());
 
-	cc1 = rpcc_after_update_in_progress();
+	cc1 = rpcc();
 
 	/* Calibrate CPU clock -- attempt #2.  */
 	if (!est_cycle_freq) {
+		cc1 = rpcc_after_update_in_progress();
 		cc2 = rpcc_after_update_in_progress();
 		est_cycle_freq = validate_cc_value(cc2 - cc1);
 		cc1 = cc2;

arch/alpha/lib/ev6-memchr.S

@@ -84,7 +84,7 @@ $last_quad:
         beq     $2, $not_found	# U : U L U L
 
 $found_it:
-#if defined(__alpha_fix__) && defined(__alpha_cix__)
+#ifdef CONFIG_ALPHA_EV67
 	/*
 	 * Since we are guaranteed to have set one of the bits, we don't
 	 * have to worry about coming back with a 0x40 out of cttz...

arch/alpha/lib/fpreg.c

@@ -4,7 +4,7 @@
  * (C) Copyright 1998 Linus Torvalds
  */
 
-#if defined(__alpha_cix__) || defined(__alpha_fix__)
+#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define STT(reg,val)  asm volatile ("ftoit $f"#reg",%0" : "=r"(val));
 #else
 #define STT(reg,val)  asm volatile ("stt $f"#reg",%0" : "=m"(val));
@@ -53,7 +53,7 @@ alpha_read_fp_reg (unsigned long reg)
 	return val;
 }
 
-#if defined(__alpha_cix__) || defined(__alpha_fix__)
+#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define LDT(reg,val)  asm volatile ("itoft %0,$f"#reg : : "r"(val));
 #else
 #define LDT(reg,val)  asm volatile ("ldt $f"#reg",%0" : : "m"(val));
@@ -98,7 +98,7 @@ alpha_write_fp_reg (unsigned long reg, unsigned long val)
 	}
 }
 
-#if defined(__alpha_cix__) || defined(__alpha_fix__)
+#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define STS(reg,val)  asm volatile ("ftois $f"#reg",%0" : "=r"(val));
 #else
 #define STS(reg,val)  asm volatile ("sts $f"#reg",%0" : "=m"(val));
@@ -147,7 +147,7 @@ alpha_read_fp_reg_s (unsigned long reg)
 	return val;
 }
 
-#if defined(__alpha_cix__) || defined(__alpha_fix__)
+#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define LDS(reg,val)  asm volatile ("itofs %0,$f"#reg : : "r"(val));
 #else
 #define LDS(reg,val)  asm volatile ("lds $f"#reg",%0" : : "m"(val));

arch/alpha/mm/numa.c

@@ -13,6 +13,7 @@
 #include <linux/bootmem.h>
 #include <linux/swap.h>
 #include <linux/initrd.h>
+#include <linux/pfn.h>
 
 #include <asm/hwrpb.h>
 #include <asm/pgalloc.h>
@@ -27,9 +28,6 @@ bootmem_data_t node_bdata[MAX_NUMNODES];
 #define DBGDCONT(args...)
 #endif
 
-#define PFN_UP(x)       (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x)     ((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x)     ((x) << PAGE_SHIFT)
 #define for_each_mem_cluster(memdesc, cluster, i)		\
 	for ((cluster) = (memdesc)->cluster, (i) = 0;		\
 	     (i) < (memdesc)->numclusters; (i)++, (cluster)++)

arch/arm/Kconfig

@@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration"
 config ARM
 	bool
 	default y
+	select RTC_LIB
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -53,6 +54,10 @@ config RWSEM_GENERIC_SPINLOCK
 config RWSEM_XCHGADD_ALGORITHM
 	bool
 
+config GENERIC_HWEIGHT
+	bool
+	default y
+
 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
@@ -148,6 +153,12 @@ config ARCH_IXP2000
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
+config ARCH_IXP23XX
+ 	bool "IXP23XX-based"
+ 	select PCI
+	help
+	  Support for Intel's IXP23xx (XScale) family of processors.
+
 config ARCH_L7200
 	bool "LinkUp-L7200"
 	select FIQ
@@ -269,6 +280,8 @@ source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-ixp2000/Kconfig"
 
+source "arch/arm/mach-ixp23xx/Kconfig"
+
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-sa1100/Kconfig"
@@ -787,7 +800,8 @@ source "drivers/acorn/block/Kconfig"
 
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
-	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+	|| ARCH_IXP23XX
 source "drivers/ide/Kconfig"
 endif
 
@@ -835,6 +849,8 @@ source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"
 
+source "drivers/rtc/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"

arch/arm/Makefile

@@ -1,6 +1,9 @@
 #
 # arch/arm/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -54,6 +57,7 @@ tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
+tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
 tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 ifeq ($(CONFIG_AEABI),y)
@@ -94,6 +98,7 @@ endif
  machine-$(CONFIG_ARCH_IOP3XX)	   := iop3xx
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
+ machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
   incdir-$(CONFIG_ARCH_OMAP)	   := omap
@@ -177,7 +182,7 @@ endif
 
 archprepare: maketools
 
-.PHONY: maketools FORCE
+PHONY += maketools FORCE
 maketools: include/linux/version.h include/asm-arm/.arch FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 

arch/arm/boot/Makefile

@@ -1,6 +1,9 @@
 #
 # arch/arm/boot/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
@@ -73,7 +76,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 	@echo '  Kernel: $@ is ready'
 
-.PHONY: initrd FORCE
+PHONY += initrd FORCE
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)

arch/arm/boot/bootp/Makefile

@@ -1,6 +1,9 @@
 #
 # linux/arch/arm/boot/bootp/Makefile
 #
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies.
+#
 
 LDFLAGS_bootp	:=-p --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
@@ -21,4 +24,4 @@ $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
 $(obj)/initrd.o: $(INITRD) FORCE
 
-.PHONY:	$(INITRD) FORCE
+PHONY += $(INITRD) FORCE

arch/arm/boot/compressed/Makefile

@@ -50,10 +50,6 @@ ifeq ($(CONFIG_ARCH_AT91RM9200),y)
 OBJS		+= head-at91rm9200.o
 endif
 
-ifeq ($(CONFIG_DEBUG_ICEDCC),y)
-OBJS            += ice-dcc.o
-endif
-
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
 OBJS		+= big-endian.o
 endif

arch/arm/boot/compressed/head.S

@@ -358,7 +358,7 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		str	r1, [r0]
 		mov	pc, lr
 
-__armv4_cache_on:
+__armv4_mmu_cache_on:
 		mov	r12, lr
 		bl	__setup_mmu
 		mov	r0, #0
@@ -367,24 +367,24 @@ __armv4_cache_on:
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x0030
-		bl	__common_cache_on
+		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
 		mov	pc, r12
 
-__arm6_cache_on:
+__arm6_mmu_cache_on:
 		mov	r12, lr
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
 		mov	r0, #0x30
-		bl	__common_cache_on
+		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c5, c0, 0	@ invalidate whole TLB v3
 		mov	pc, r12
 
-__common_cache_on:
+__common_mmu_cache_on:
 #ifndef DEBUG
 		orr	r0, r0, #0x000d		@ Write buffer, mmu
 #endif
@@ -471,12 +471,12 @@ call_cache_fn:	adr	r12, proc_types
 proc_types:
 		.word	0x41560600		@ ARM6/610
 		.word	0xffffffe0
-		b	__arm6_cache_off	@ works, but slow
-		b	__arm6_cache_off
+		b	__arm6_mmu_cache_off	@ works, but slow
+		b	__arm6_mmu_cache_off
 		mov	pc, lr
-@		b	__arm6_cache_on		@ untested
-@		b	__arm6_cache_off
-@		b	__armv3_cache_flush
+@		b	__arm6_mmu_cache_on		@ untested
+@		b	__arm6_mmu_cache_off
+@		b	__armv3_mmu_cache_flush
 
 		.word	0x00000000		@ old ARM ID
 		.word	0x0000f000
@@ -486,14 +486,14 @@ proc_types:
 
 		.word	0x41007000		@ ARM7/710
 		.word	0xfff8fe00
-		b	__arm7_cache_off
-		b	__arm7_cache_off
+		b	__arm7_mmu_cache_off
+		b	__arm7_mmu_cache_off
 		mov	pc, lr
 
 		.word	0x41807200		@ ARM720T (writethrough)
 		.word	0xffffff00
-		b	__armv4_cache_on
-		b	__armv4_cache_off
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
 		mov	pc, lr
 
 		.word	0x00007000		@ ARM7 IDs
@@ -506,41 +506,41 @@ proc_types:
 
 		.word	0x4401a100		@ sa110 / sa1100
 		.word	0xffffffe0
-		b	__armv4_cache_on
-		b	__armv4_cache_off
-		b	__armv4_cache_flush
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv4_mmu_cache_flush
 
 		.word	0x6901b110		@ sa1110
 		.word	0xfffffff0
-		b	__armv4_cache_on
-		b	__armv4_cache_off
-		b	__armv4_cache_flush
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv4_mmu_cache_flush
 
 		@ These match on the architecture ID
 
 		.word	0x00020000		@ ARMv4T
 		.word	0x000f0000
-		b	__armv4_cache_on
-		b	__armv4_cache_off
-		b	__armv4_cache_flush
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv4_mmu_cache_flush
 
 		.word	0x00050000		@ ARMv5TE
 		.word	0x000f0000
-		b	__armv4_cache_on
-		b	__armv4_cache_off
-		b	__armv4_cache_flush
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv4_mmu_cache_flush
 
 		.word	0x00060000		@ ARMv5TEJ
 		.word	0x000f0000
-		b	__armv4_cache_on
-		b	__armv4_cache_off
-		b	__armv4_cache_flush
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv4_mmu_cache_flush
 
 		.word	0x00070000		@ ARMv6
 		.word	0x000f0000
-		b	__armv4_cache_on
-		b	__armv4_cache_off
-		b	__armv6_cache_flush
+		b	__armv4_mmu_cache_on
+		b	__armv4_mmu_cache_off
+		b	__armv6_mmu_cache_flush
 
 		.word	0			@ unrecognised type
 		.word	0
@@ -562,7 +562,7 @@ proc_types:
 cache_off:	mov	r3, #12			@ cache_off function
 		b	call_cache_fn
 
-__armv4_cache_off:
+__armv4_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 		bic	r0, r0, #0x000d
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
@@ -571,15 +571,15 @@ __armv4_cache_off:
 		mcr	p15, 0, r0, c8, c7	@ invalidate whole TLB v4
 		mov	pc, lr
 
-__arm6_cache_off:
+__arm6_mmu_cache_off:
 		mov	r0, #0x00000030		@ ARM6 control reg.
-		b	__armv3_cache_off
+		b	__armv3_mmu_cache_off
 
-__arm7_cache_off:
+__arm7_mmu_cache_off:
 		mov	r0, #0x00000070		@ ARM7 control reg.
-		b	__armv3_cache_off
+		b	__armv3_mmu_cache_off
 
-__armv3_cache_off:
+__armv3_mmu_cache_off:
 		mcr	p15, 0, r0, c1, c0, 0	@ turn MMU and cache off
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
@@ -601,7 +601,7 @@ cache_clean_flush:
 		mov	r3, #16
 		b	call_cache_fn
 
-__armv6_cache_flush:
+__armv6_mmu_cache_flush:
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
 		mcr	p15, 0, r1, c7, c5, 0	@ invalidate I+BTB
@@ -609,7 +609,7 @@ __armv6_cache_flush:
 		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
 		mov	pc, lr
 
-__armv4_cache_flush:
+__armv4_mmu_cache_flush:
 		mov	r2, #64*1024		@ default: 32K dcache size (*2)
 		mov	r11, #32		@ default: 32 byte line size
 		mrc	p15, 0, r3, c0, c0, 1	@ read cache type
@@ -637,7 +637,7 @@ no_cache_id:
 		mcr	p15, 0, r1, c7, c10, 4	@ drain WB
 		mov	pc, lr
 
-__armv3_cache_flush:
+__armv3_mmu_cache_flush:
 		mov	r1, #0
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr

arch/arm/boot/compressed/ice-dcc.S

@@ -1,17 +0,0 @@
-
-
-	.text
-
-	.global	icedcc_putc
-
-icedcc_putc:
-	mov	r2, #0x4000000
-1:
-	subs	r2, r2, #1
-	movlt	pc, r14
-	mrc	p14, 0, r1, c0, c0, 0
-	tst	r1, #2
-	bne	1b
-
-	mcr	p14, 0, r0, c1, c0, 0
-	mov	pc, r14

arch/arm/boot/compressed/misc.c

@@ -20,24 +20,45 @@ unsigned int __machine_arch_type;
 
 #include <linux/string.h>
 
-#include <asm/arch/uncompress.h>
-
 #ifdef STANDALONE_DEBUG
 #define putstr printf
-#endif
+#else
+
+static void putstr(const char *ptr);
+
+#include <linux/compiler.h>
+#include <asm/arch/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
-#define putstr icedcc_putstr
-#define putc icedcc_putc
+static void icedcc_putc(int ch)
+{
+	int status, i = 0x4000000;
 
-extern void icedcc_putc(int ch);
+	do {
+		if (--i < 0)
+			return;
 
-static void
-icedcc_putstr(const char *ptr)
+		asm("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
+	} while (status & 2);
+
+	asm("mcr p15, 0, %0, c1, c0, 0" : : "r" (ch));
+}
+
+#define putc(ch)	icedcc_putc(ch)
+#define flush()	do { } while (0)
+#endif
+
+static void putstr(const char *ptr)
 {
-	for (; *ptr != '\0'; ptr++) {
-		icedcc_putc(*ptr);
+	char c;
+
+	while ((c = *ptr++) != '\0') {
+		if (c == '\n')
+			putc('\r');
+		putc(c);
 	}
+
+	flush();
 }
 
 #endif

arch/arm/common/rtctime.c

@@ -20,6 +20,7 @@
 #include <linux/capability.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/rtc.h>
 
 #include <asm/rtc.h>
 #include <asm/semaphore.h>
@@ -42,89 +43,6 @@ static struct rtc_ops *rtc_ops;
 
 #define rtc_epoch 1900UL
 
-static const unsigned char days_in_month[] = {
-	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-#define LEAPS_THRU_END_OF(y) ((y)/4 - (y)/100 + (y)/400)
-#define LEAP_YEAR(year) ((!(year % 4) && (year % 100)) || !(year % 400))
-
-static int month_days(unsigned int month, unsigned int year)
-{
-	return days_in_month[month] + (LEAP_YEAR(year) && month == 1);
-}
-
-/*
- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
- */
-void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
-{
-	int days, month, year;
-
-	days = time / 86400;
-	time -= days * 86400;
-
-	tm->tm_wday = (days + 4) % 7;
-
-	year = 1970 + days / 365;
-	days -= (year - 1970) * 365
-	        + LEAPS_THRU_END_OF(year - 1)
-	        - LEAPS_THRU_END_OF(1970 - 1);
-	if (days < 0) {
-		year -= 1;
-		days += 365 + LEAP_YEAR(year);
-	}
-	tm->tm_year = year - 1900;
-	tm->tm_yday = days + 1;
-
-	for (month = 0; month < 11; month++) {
-		int newdays;
-
-		newdays = days - month_days(month, year);
-		if (newdays < 0)
-			break;
-		days = newdays;
-	}
-	tm->tm_mon = month;
-	tm->tm_mday = days + 1;
-
-	tm->tm_hour = time / 3600;
-	time -= tm->tm_hour * 3600;
-	tm->tm_min = time / 60;
-	tm->tm_sec = time - tm->tm_min * 60;
-}
-EXPORT_SYMBOL(rtc_time_to_tm);
-
-/*
- * Does the rtc_time represent a valid date/time?
- */
-int rtc_valid_tm(struct rtc_time *tm)
-{
-	if (tm->tm_year < 70 ||
-	    tm->tm_mon >= 12 ||
-	    tm->tm_mday < 1 ||
-	    tm->tm_mday > month_days(tm->tm_mon, tm->tm_year + 1900) ||
-	    tm->tm_hour >= 24 ||
-	    tm->tm_min >= 60 ||
-	    tm->tm_sec >= 60)
-		return -EINVAL;
-
-	return 0;
-}
-EXPORT_SYMBOL(rtc_valid_tm);
-
-/*
- * Convert Gregorian date to seconds since 01-01-1970 00:00:00.
- */
-int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
-{
-	*time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
-		       tm->tm_hour, tm->tm_min, tm->tm_sec);
-
-	return 0;
-}
-EXPORT_SYMBOL(rtc_tm_to_time);
-
 /*
  * Calculate the next alarm time given the requested alarm time mask
  * and the current time.
@@ -151,13 +69,13 @@ void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc
 	}
 }
 
-static inline int rtc_read_time(struct rtc_ops *ops, struct rtc_time *tm)
+static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
 {
 	memset(tm, 0, sizeof(struct rtc_time));
 	return ops->read_time(tm);
 }
 
-static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm)
+static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm)
 {
 	int ret;
 
@@ -168,7 +86,7 @@ static inline int rtc_set_time(struct rtc_ops *ops, struct rtc_time *tm)
 	return ret;
 }
 
-static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
+static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
 {
 	int ret = -EINVAL;
 	if (ops->read_alarm) {
@@ -178,7 +96,7 @@ static inline int rtc_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
 	return ret;
 }
 
-static inline int rtc_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
+static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm)
 {
 	int ret = -EINVAL;
 	if (ops->set_alarm)
@@ -266,7 +184,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 
 	switch (cmd) {
 	case RTC_ALM_READ:
-		ret = rtc_read_alarm(ops, &alrm);
+		ret = rtc_arm_read_alarm(ops, &alrm);
 		if (ret)
 			break;
 		ret = copy_to_user(uarg, &alrm.time, sizeof(tm));
@@ -288,11 +206,11 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 		alrm.time.tm_wday = -1;
 		alrm.time.tm_yday = -1;
 		alrm.time.tm_isdst = -1;
-		ret = rtc_set_alarm(ops, &alrm);
+		ret = rtc_arm_set_alarm(ops, &alrm);
 		break;
 
 	case RTC_RD_TIME:
-		ret = rtc_read_time(ops, &tm);
+		ret = rtc_arm_read_time(ops, &tm);
 		if (ret)
 			break;
 		ret = copy_to_user(uarg, &tm, sizeof(tm));
@@ -310,7 +228,7 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			ret = -EFAULT;
 			break;
 		}
-		ret = rtc_set_time(ops, &tm);
+		ret = rtc_arm_set_time(ops, &tm);
 		break;
 
 	case RTC_EPOCH_SET:
@@ -341,11 +259,11 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
 			ret = -EFAULT;
 			break;
 		}
-		ret = rtc_set_alarm(ops, &alrm);
+		ret = rtc_arm_set_alarm(ops, &alrm);
 		break;
 
 	case RTC_WKALM_RD:
-		ret = rtc_read_alarm(ops, &alrm);
+		ret = rtc_arm_read_alarm(ops, &alrm);
 		if (ret)
 			break;
 		ret = copy_to_user(uarg, &alrm, sizeof(alrm));
@@ -435,7 +353,7 @@ static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eo
 	struct rtc_time tm;
 	char *p = page;
 
-	if (rtc_read_time(ops, &tm) == 0) {
+	if (rtc_arm_read_time(ops, &tm) == 0) {
 		p += sprintf(p,
 			"rtc_time\t: %02d:%02d:%02d\n"
 			"rtc_date\t: %04d-%02d-%02d\n"
@@ -445,7 +363,7 @@ static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eo
 			rtc_epoch);
 	}
 
-	if (rtc_read_alarm(ops, &alrm) == 0) {
+	if (rtc_arm_read_alarm(ops, &alrm) == 0) {
 		p += sprintf(p, "alrm_time\t: ");
 		if ((unsigned int)alrm.time.tm_hour <= 24)
 			p += sprintf(p, "%02d:", alrm.time.tm_hour);

arch/arm/configs/ixp23xx_defconfig

@@ -0,0 +1,1302 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16
+# Tue Mar 21 03:27:20 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+CONFIG_ARCH_IXP23XX=y
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+
+#
+# Intel IXP23xx Implementation Options
+#
+
+#
+# IXP23xx Platforms
+#
+CONFIG_MACH_ESPRESSO=y
+CONFIG_MACH_IXDP2351=y
+CONFIG_MACH_ROADRUNNER=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+CONFIG_CPU_BIG_ENDIAN=y
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+CONFIG_WAN=y
+# CONFIG_DSCC4 is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_SYNCLINK_SYNCPPP is not set
+CONFIG_HDLC=y
+CONFIG_HDLC_RAW=y
+# CONFIG_HDLC_RAW_ETH is not set
+CONFIG_HDLC_CISCO=y
+CONFIG_HDLC_FR=y
+CONFIG_HDLC_PPP=y
+
+#
+# X.25/LAPB support is disabled
+#
+# CONFIG_PCI200SYN is not set
+# CONFIG_WANXL is not set
+# CONFIG_PC300 is not set
+# CONFIG_FARSYNC is not set
+CONFIG_DLCI=y
+CONFIG_DLCI_COUNT=24
+CONFIG_DLCI_MAX=8
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/kernel/entry-header.S

@@ -37,24 +37,6 @@
 #endif
 	.endm
 
-#if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq
-	cpsid	i
-	.endm
-
-	.macro	enable_irq
-	cpsie	i
-	.endm
-#else
-	.macro	disable_irq
-	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
-	.endm
-
-	.macro	enable_irq
-	msr	cpsr_c, #SVC_MODE
-	.endm
-#endif
-
 	.macro	get_thread_info, rd
 	mov	\rd, sp, lsr #13
 	mov	\rd, \rd, lsl #13

arch/arm/kernel/head.S

@@ -81,6 +81,7 @@
 ENTRY(stext)
 	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
 						@ and irqs disabled
+	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
 	beq	__error_p			@ yes, error 'p'
@@ -155,6 +156,7 @@ ENTRY(secondary_startup)
 	 * as it has already been validated by the primary processor.
 	 */
 	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?
 	moveq	r0, #'p'			@ yes, error 'p'
@@ -449,19 +451,19 @@ __error:
  * (and therefore, we are not in the correct address space).  We have to
  * calculate the offset.
  *
+ *	r9 = cpuid
  * Returns:
  *	r3, r4, r6 corrupted
  *	r5 = proc_info pointer in physical address space
- *	r9 = cpuid
+ *	r9 = cpuid (preserved)
  */
 	.type	__lookup_processor_type, %function
 __lookup_processor_type:
 	adr	r3, 3f
-	ldmda	r3, {r5, r6, r9}
-	sub	r3, r3, r9			@ get offset between virt&phys
+	ldmda	r3, {r5 - r7}
+	sub	r3, r3, r7			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
 	add	r6, r6, r3			@ physical address space
-	mrc	p15, 0, r9, c0, c0		@ get processor id
 1:	ldmia	r5, {r3, r4}			@ value, mask
 	and	r4, r4, r9			@ mask wanted bits
 	teq	r3, r4
@@ -476,10 +478,11 @@ __lookup_processor_type:
  * This provides a C-API version of the above function.
  */
 ENTRY(lookup_processor_type)
-	stmfd	sp!, {r4 - r6, r9, lr}
+	stmfd	sp!, {r4 - r7, r9, lr}
+	mov	r9, r0
 	bl	__lookup_processor_type
 	mov	r0, r5
-	ldmfd	sp!, {r4 - r6, r9, pc}
+	ldmfd	sp!, {r4 - r7, r9, pc}
 
 /*
  * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for

arch/arm/kernel/setup.c

@@ -278,7 +278,7 @@ int cpu_architecture(void)
  * These functions re-use the assembly code in head.S, which
  * already provide the required functionality.
  */
-extern struct proc_info_list *lookup_processor_type(void);
+extern struct proc_info_list *lookup_processor_type(unsigned int);
 extern struct machine_desc *lookup_machine_type(unsigned int);
 
 static void __init setup_processor(void)
@@ -290,7 +290,7 @@ static void __init setup_processor(void)
 	 * types.  The linker builds this table for us from the
 	 * entries in arch/arm/mm/proc-*.S
 	 */
-	list = lookup_processor_type();
+	list = lookup_processor_type(processor_id);
 	if (!list) {
 		printk("CPU configuration botched (ID %08x), unable "
 		       "to continue.\n", processor_id);

arch/arm/kernel/smp.c

@@ -337,9 +337,6 @@ void __init smp_prepare_boot_cpu(void)
 	unsigned int cpu = smp_processor_id();
 
 	per_cpu(cpu_data, cpu).idle = current;
-
-	cpu_set(cpu, cpu_present_map);
-	cpu_set(cpu, cpu_online_map);
 }
 
 static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)

arch/arm/kernel/sys_arm.c

@@ -234,7 +234,12 @@ asmlinkage int sys_ipc(uint call, int first, int second, int third,
  */
 asmlinkage int sys_fork(struct pt_regs *regs)
 {
+#ifdef CONFIG_MMU
 	return do_fork(SIGCHLD, regs->ARM_sp, regs, 0, NULL, NULL);
+#else
+	/* can not support in nommu mode */
+	return(-EINVAL);
+#endif
 }
 
 /* Clone a task - this clones the calling program thread.

arch/arm/kernel/traps.c

@@ -506,7 +506,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 		if (!pmd_present(*pmd))
 			goto bad_access;
 		pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
-		if (!pte_present(*pte) || !pte_write(*pte)) {
+		if (!pte_present(*pte) || !pte_dirty(*pte)) {
 			pte_unmap_unlock(pte, ptl);
 			goto bad_access;
 		}

arch/arm/lib/Makefile

@@ -18,7 +18,7 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 
 # the code in uaccess.S is not preemption safe and
 # probably faster on ARMv3 only
-ifeq ($CONFIG_PREEMPT,y)
+ifeq ($(CONFIG_PREEMPT),y)
   lib-y	+= copy_from_user.o copy_to_user.o
 else
 ifneq ($(CONFIG_CPU_32v3),y)

arch/arm/lib/backtrace.S

@@ -29,7 +29,7 @@ ENTRY(__backtrace)
 
 ENTRY(c_backtrace)
 
-#ifndef CONFIG_FRAME_POINTER
+#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
 		mov	pc, lr
 #else
 

arch/arm/lib/copy_template.S

@@ -236,7 +236,7 @@
 
 
 /*
- * Abort preanble and completion macros.
+ * Abort preamble and completion macros.
  * If a fixup handler is required then those macros must surround it.
  * It is assumed that the fixup code will handle the private part of
  * the exit macro.

arch/arm/mach-ep93xx/core.c

@@ -30,7 +30,9 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/delay.h>
+#include <linux/termios.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -360,6 +362,68 @@ void __init ep93xx_init_irq(void)
 /*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
+#define EP93XX_UART_MCR_OFFSET		(0x0100)
+
+static void ep93xx_uart_set_mctrl(struct amba_device *dev,
+				  void __iomem *base, unsigned int mctrl)
+{
+	unsigned int mcr;
+
+	mcr = 0;
+	if (!(mctrl & TIOCM_RTS))
+		mcr |= 2;
+	if (!(mctrl & TIOCM_DTR))
+		mcr |= 1;
+
+	__raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET);
+}
+
+static struct amba_pl010_data ep93xx_uart_data = {
+	.set_mctrl	= ep93xx_uart_set_mctrl,
+};
+
+static struct amba_device uart1_device = {
+	.dev		= {
+		.bus_id		= "apb:uart1",
+		.platform_data	= &ep93xx_uart_data,
+	},
+	.res		= {
+		.start	= EP93XX_UART1_PHYS_BASE,
+		.end	= EP93XX_UART1_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { IRQ_EP93XX_UART1, NO_IRQ },
+	.periphid	= 0x00041010,
+};
+
+static struct amba_device uart2_device = {
+	.dev		= {
+		.bus_id		= "apb:uart2",
+		.platform_data	= &ep93xx_uart_data,
+	},
+	.res		= {
+		.start	= EP93XX_UART2_PHYS_BASE,
+		.end	= EP93XX_UART2_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { IRQ_EP93XX_UART2, NO_IRQ },
+	.periphid	= 0x00041010,
+};
+
+static struct amba_device uart3_device = {
+	.dev		= {
+		.bus_id		= "apb:uart3",
+		.platform_data	= &ep93xx_uart_data,
+	},
+	.res		= {
+		.start	= EP93XX_UART3_PHYS_BASE,
+		.end	= EP93XX_UART3_PHYS_BASE + 0x0fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	.irq		= { IRQ_EP93XX_UART3, NO_IRQ },
+	.periphid	= 0x00041010,
+};
+
 void __init ep93xx_init_devices(void)
 {
 	unsigned int v;
@@ -371,4 +435,8 @@ void __init ep93xx_init_devices(void)
 	v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
 	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+
+	amba_device_register(&uart1_device, &iomem_resource);
+	amba_device_register(&uart2_device, &iomem_resource);
+	amba_device_register(&uart3_device, &iomem_resource);
 }

arch/arm/mach-footbridge/time.c

@@ -34,27 +34,12 @@ static int rtc_base;
 static unsigned long __init get_isa_cmos_time(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
-	int i;
 
 	// check to see if the RTC makes sense.....
 	if ((CMOS_READ(RTC_VALID) & RTC_VRT) == 0)
 		return mktime(1970, 1, 1, 0, 0, 0);
 
-	/* The Linux interpretation of the CMOS clock register contents:
-	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
-	 * RTC registers show the second which has precisely just started.
-	 * Let's hope other operating systems interpret the RTC the same way.
-	 */
-	/* read RTC exactly on falling edge of update flag */
-	for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
-		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
-			break;
-
-	for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
-		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
-			break;
-
-	do { /* Isn't this overkill ? UIP above should guarantee consistency */
+	do {
 		sec  = CMOS_READ(RTC_SECONDS);
 		min  = CMOS_READ(RTC_MINUTES);
 		hour = CMOS_READ(RTC_HOURS);

arch/arm/mach-integrator/core.c

@@ -15,7 +15,9 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
+#include <linux/termios.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/serial.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -28,6 +30,8 @@
 
 #include "common.h"
 
+static struct amba_pl010_data integrator_uart_data;
+
 static struct amba_device rtc_device = {
 	.dev		= {
 		.bus_id	= "mb:15",
@@ -44,6 +48,7 @@ static struct amba_device rtc_device = {
 static struct amba_device uart0_device = {
 	.dev		= {
 		.bus_id	= "mb:16",
+		.platform_data = &integrator_uart_data,
 	},
 	.res		= {
 		.start	= INTEGRATOR_UART0_BASE,
@@ -57,6 +62,7 @@ static struct amba_device uart0_device = {
 static struct amba_device uart1_device = {
 	.dev		= {
 		.bus_id	= "mb:17",
+		.platform_data = &integrator_uart_data,
 	},
 	.res		= {
 		.start	= INTEGRATOR_UART1_BASE,
@@ -115,6 +121,46 @@ static int __init integrator_init(void)
 
 arch_initcall(integrator_init);
 
+/*
+ * On the Integrator platform, the port RTS and DTR are provided by
+ * bits in the following SC_CTRLS register bits:
+ *        RTS  DTR
+ *  UART0  7    6
+ *  UART1  5    4
+ */
+#define SC_CTRLC	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
+#define SC_CTRLS	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+
+static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
+{
+	unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask;
+
+	if (dev == &uart0_device) {
+		rts_mask = 1 << 4;
+		dtr_mask = 1 << 5;
+	} else {
+		rts_mask = 1 << 6;
+		dtr_mask = 1 << 7;
+	}
+
+	if (mctrl & TIOCM_RTS)
+		ctrlc |= rts_mask;
+	else
+		ctrls |= rts_mask;
+
+	if (mctrl & TIOCM_DTR)
+		ctrlc |= dtr_mask;
+	else
+		ctrls |= dtr_mask;
+
+	__raw_writel(ctrls, SC_CTRLS);
+	__raw_writel(ctrlc, SC_CTRLC);
+}
+
+static struct amba_pl010_data integrator_uart_data = {
+	.set_mctrl = integrator_uart_set_mctrl,
+};
+
 #define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET
 
 static DEFINE_SPINLOCK(cm_lock);

arch/arm/mach-integrator/time.c

@@ -40,13 +40,13 @@ static int integrator_set_rtc(void)
 	return 1;
 }
 
-static int rtc_read_alarm(struct rtc_wkalrm *alrm)
+static int integrator_rtc_read_alarm(struct rtc_wkalrm *alrm)
 {
 	rtc_time_to_tm(readl(rtc_base + RTC_MR), &alrm->time);
 	return 0;
 }
 
-static inline int rtc_set_alarm(struct rtc_wkalrm *alrm)
+static inline int integrator_rtc_set_alarm(struct rtc_wkalrm *alrm)
 {
 	unsigned long time;
 	int ret;
@@ -62,7 +62,7 @@ static inline int rtc_set_alarm(struct rtc_wkalrm *alrm)
 	return ret;
 }
 
-static int rtc_read_time(struct rtc_time *tm)
+static int integrator_rtc_read_time(struct rtc_time *tm)
 {
 	rtc_time_to_tm(readl(rtc_base + RTC_DR), tm);
 	return 0;
@@ -76,7 +76,7 @@ static int rtc_read_time(struct rtc_time *tm)
  * edge of the 1Hz clock, we must write the time one second
  * in advance.
  */
-static inline int rtc_set_time(struct rtc_time *tm)
+static inline int integrator_rtc_set_time(struct rtc_time *tm)
 {
 	unsigned long time;
 	int ret;
@@ -90,10 +90,10 @@ static inline int rtc_set_time(struct rtc_time *tm)
 
 static struct rtc_ops rtc_ops = {
 	.owner		= THIS_MODULE,
-	.read_time	= rtc_read_time,
-	.set_time	= rtc_set_time,
-	.read_alarm	= rtc_read_alarm,
-	.set_alarm	= rtc_set_alarm,
+	.read_time	= integrator_rtc_read_time,
+	.set_time	= integrator_rtc_set_time,
+	.read_alarm	= integrator_rtc_read_alarm,
+	.set_alarm	= integrator_rtc_set_alarm,
 };
 
 static irqreturn_t arm_rtc_interrupt(int irq, void *dev_id,

arch/arm/mach-iop3xx/iop331-setup.c

@@ -103,7 +103,7 @@ static struct plat_serial8250_port iop33x_uart1_data[] = {
 
 static struct platform_device iop33x_uart0 = {
        .name = "serial8250",
-       .id = 0,
+       .id = PLAT8250_DEV_PLATFORM,
        .dev.platform_data = iop33x_uart0_data,
        .num_resources = 2,
        .resource = iop33x_uart0_resources,
@@ -111,7 +111,7 @@ static struct platform_device iop33x_uart0 = {
 
 static struct platform_device iop33x_uart1 = {
        .name = "serial8250",
-       .id = 1,
+       .id = PLAT8250_DEV_PLATFORM1,
        .dev.platform_data = iop33x_uart1_data,
        .num_resources = 2,
        .resource = iop33x_uart1_resources,

arch/arm/mach-ixp2000/ixdp2x01.c

@@ -30,6 +30,7 @@
 #include <linux/tty.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/serial_8250.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -132,7 +133,7 @@ void __init ixdp2x01_init_irq(void)
 
 
 /*************************************************************************
- * IXDP2x01 memory map and serial ports
+ * IXDP2x01 memory map
  *************************************************************************/
 static struct map_desc ixdp2x01_io_desc __initdata = {
 	.virtual	= IXDP2X01_VIRT_CPLD_BASE, 
@@ -141,40 +142,78 @@ static struct map_desc ixdp2x01_io_desc __initdata = {
 	.type		= MT_DEVICE
 };
 
-static struct uart_port ixdp2x01_serial_ports[2] = {
+static void __init ixdp2x01_map_io(void)
+{
+	ixp2000_map_io();
+	iotable_init(&ixdp2x01_io_desc, 1);
+}
+
+
+/*************************************************************************
+ * IXDP2x01 serial ports
+ *************************************************************************/
+static struct plat_serial8250_port ixdp2x01_serial_port1[] = {
 	{
-		.membase	= (char *)(IXDP2X01_UART1_VIRT_BASE),
 		.mapbase	= (unsigned long)IXDP2X01_UART1_PHYS_BASE,
+		.membase	= (char *)IXDP2X01_UART1_VIRT_BASE,
 		.irq		= IRQ_IXDP2X01_UART1,
-		.flags		= UPF_SKIP_TEST,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM32,
 		.regshift	= 2,
 		.uartclk	= IXDP2X01_UART_CLK,
-		.line		= 1,
-		.type		= PORT_16550A,
-		.fifosize	= 16
-	}, {
-		.membase	= (char *)(IXDP2X01_UART2_VIRT_BASE),
+	},
+	{ }
+};
+
+static struct resource ixdp2x01_uart_resource1 = {
+	.start		= IXDP2X01_UART1_PHYS_BASE,
+	.end		= IXDP2X01_UART1_PHYS_BASE + 0xffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ixdp2x01_serial_device1 = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data		= ixdp2x01_serial_port1,
+	},
+	.num_resources	= 1,
+	.resource	= &ixdp2x01_uart_resource1,
+};
+
+static struct plat_serial8250_port ixdp2x01_serial_port2[] = {
+	{
 		.mapbase	= (unsigned long)IXDP2X01_UART2_PHYS_BASE,
+		.membase	= (char *)IXDP2X01_UART2_VIRT_BASE,
 		.irq		= IRQ_IXDP2X01_UART2,
-		.flags		= UPF_SKIP_TEST,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 		.iotype		= UPIO_MEM32,
 		.regshift	= 2,
 		.uartclk	= IXDP2X01_UART_CLK,
-		.line		= 2,
-		.type		= PORT_16550A,
-		.fifosize	= 16
 	}, 
+	{ }
 };
 
-static void __init ixdp2x01_map_io(void)
-{
-	ixp2000_map_io();	
+static struct resource ixdp2x01_uart_resource2 = {
+	.start		= IXDP2X01_UART2_PHYS_BASE,
+	.end		= IXDP2X01_UART2_PHYS_BASE + 0xffff,
+	.flags		= IORESOURCE_MEM,
+};
 
-	iotable_init(&ixdp2x01_io_desc, 1);
+static struct platform_device ixdp2x01_serial_device2 = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM2,
+	.dev		= {
+		.platform_data		= ixdp2x01_serial_port2,
+	},
+	.num_resources	= 1,
+	.resource	= &ixdp2x01_uart_resource2,
+};
 
-	early_serial_setup(&ixdp2x01_serial_ports[0]);
-	early_serial_setup(&ixdp2x01_serial_ports[1]);
+static void ixdp2x01_uart_init(void)
+{
+	platform_device_register(&ixdp2x01_serial_device1);
+	platform_device_register(&ixdp2x01_serial_device2);
 }
 
 
@@ -374,6 +413,7 @@ static void __init ixdp2x01_init_machine(void)
 
 	platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
 	ixp2000_uart_init();
+	ixdp2x01_uart_init();
 }
 
 

arch/arm/mach-ixp23xx/Kconfig

@@ -0,0 +1,25 @@
+if ARCH_IXP23XX
+
+config ARCH_SUPPORTS_BIG_ENDIAN
+	bool
+	default y
+
+menu "Intel IXP23xx Implementation Options"
+
+comment "IXP23xx Platforms"
+
+config MACH_ESPRESSO
+	bool "Support IP Fabrics Double Espresso platform"
+	help
+
+config MACH_IXDP2351
+	bool "Support Intel IXDP2351 platform"
+	help
+
+config MACH_ROADRUNNER
+	bool "Support ADI RoadRunner platform"
+	help
+
+endmenu
+
+endif

arch/arm/mach-ixp23xx/Makefile

@@ -0,0 +1,11 @@
+#
+# Makefile for the linux kernel.
+#
+obj-y			:= core.o pci.o
+obj-m			:=
+obj-n			:=
+obj-			:=
+
+obj-$(CONFIG_MACH_ESPRESSO)	+= espresso.o
+obj-$(CONFIG_MACH_IXDP2351)	+= ixdp2351.o
+obj-$(CONFIG_MACH_ROADRUNNER)	+= roadrunner.o

arch/arm/mach-ixp23xx/Makefile.boot

@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100

arch/arm/mach-ixp23xx/core.c

@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-ixp23xx/core.c
+ *
+ * Core routines for IXP23xx chips
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+
+
+/*************************************************************************
+ * Chip specific mappings shared by all IXP23xx systems
+ *************************************************************************/
+static struct map_desc ixp23xx_io_desc[] __initdata = {
+	{ /* XSI-CPP CSRs */
+	 	.virtual	= IXP23XX_XSI2CPP_CSR_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
+	 	.length		= IXP23XX_XSI2CPP_CSR_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* Expansion Bus Config */
+	 	.virtual	= IXP23XX_EXP_CFG_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
+	 	.length		= IXP23XX_EXP_CFG_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
+	 	.virtual	= IXP23XX_PERIPHERAL_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
+	 	.length		= IXP23XX_PERIPHERAL_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* CAP CSRs */
+	 	.virtual	= IXP23XX_CAP_CSR_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
+	 	.length		= IXP23XX_CAP_CSR_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* MSF CSRs */
+	 	.virtual	= IXP23XX_MSF_CSR_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
+	 	.length		= IXP23XX_MSF_CSR_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI I/O Space */
+	 	.virtual	= IXP23XX_PCI_IO_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
+	 	.length		= IXP23XX_PCI_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI Config Space */
+	 	.virtual	= IXP23XX_PCI_CFG_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
+	 	.length		= IXP23XX_PCI_CFG_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI local CFG CSRs */
+	 	.virtual	= IXP23XX_PCI_CREG_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
+	 	.length		= IXP23XX_PCI_CREG_SIZE,
+		.type		= MT_DEVICE,
+	}, { /* PCI MEM Space */
+	 	.virtual	= IXP23XX_PCI_MEM_VIRT,
+	 	.pfn		= __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
+	 	.length		= IXP23XX_PCI_MEM_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
+void __init ixp23xx_map_io(void)
+{
+	iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
+}
+
+
+/***************************************************************************
+ * IXP23xx Interrupt Handling
+ ***************************************************************************/
+enum ixp23xx_irq_type {
+	IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
+};
+
+static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
+
+static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
+{
+	int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+	u32 int_style;
+	enum ixp23xx_irq_type irq_type;
+	volatile u32 *int_reg;
+
+	/*
+	 * Only GPIOs 6-15 are wired to interrupts on IXP23xx
+	 */
+	if (line < 6 || line > 15)
+		return -EINVAL;
+
+	switch (type) {
+	case IRQT_BOTHEDGE:
+		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
+		irq_type = IXP23XX_IRQ_EDGE;
+		break;
+	case IRQT_RISING:
+		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
+		irq_type = IXP23XX_IRQ_EDGE;
+		break;
+	case IRQT_FALLING:
+		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
+		irq_type = IXP23XX_IRQ_EDGE;
+		break;
+	case IRQT_HIGH:
+		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
+		irq_type = IXP23XX_IRQ_LEVEL;
+		break;
+	case IRQT_LOW:
+		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
+		irq_type = IXP23XX_IRQ_LEVEL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ixp23xx_config_irq(irq, irq_type);
+
+	if (line >= 8) {	/* pins 8-15 */
+		line -= 8;
+		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
+	} else {		/* pins 0-7 */
+		int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
+	}
+
+	/*
+	 * Clear pending interrupts
+	 */
+	*IXP23XX_GPIO_GPISR = (1 << line);
+
+	/* Clear the style for the appropriate pin */
+	*int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
+			(line * IXP23XX_GPIO_STYLE_SIZE));
+
+	/* Set the new style */
+	*int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
+
+	return 0;
+}
+
+static void ixp23xx_irq_mask(unsigned int irq)
+{
+	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+	*intr_reg &= ~(1 << (irq % 32));
+}
+
+static void ixp23xx_irq_ack(unsigned int irq)
+{
+	int line = irq - IRQ_IXP23XX_GPIO6 + 6;
+
+	if ((line < 6) || (line > 15))
+		return;
+
+	*IXP23XX_GPIO_GPISR = (1 << line);
+}
+
+/*
+ * Level triggered interrupts on GPIO lines can only be cleared when the
+ * interrupt condition disappears.
+ */
+static void ixp23xx_irq_level_unmask(unsigned int irq)
+{
+	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+	ixp23xx_irq_ack(irq);
+
+	*intr_reg |= (1 << (irq % 32));
+}
+
+static void ixp23xx_irq_edge_unmask(unsigned int irq)
+{
+	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+
+	*intr_reg |= (1 << (irq % 32));
+}
+
+static struct irqchip ixp23xx_irq_level_chip = {
+	.ack		= ixp23xx_irq_mask,
+	.mask		= ixp23xx_irq_mask,
+	.unmask		= ixp23xx_irq_level_unmask,
+	.set_type	= ixp23xx_irq_set_type
+};
+
+static struct irqchip ixp23xx_irq_edge_chip = {
+	.ack		= ixp23xx_irq_ack,
+	.mask		= ixp23xx_irq_mask,
+	.unmask		= ixp23xx_irq_edge_unmask,
+	.set_type	= ixp23xx_irq_set_type
+};
+
+static void ixp23xx_pci_irq_mask(unsigned int irq)
+{
+	*IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+static void ixp23xx_pci_irq_unmask(unsigned int irq)
+{
+	*IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
+}
+
+/*
+ * TODO: Should this just be done at ASM level?
+ */
+static void pci_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	u32 pci_interrupt;
+	unsigned int irqno;
+	struct irqdesc *int_desc;
+
+	pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
+
+	desc->chip->ack(irq);
+
+	/* See which PCI_INTA, or PCI_INTB interrupted */
+	if (pci_interrupt & (1 << 26)) {
+		irqno = IRQ_IXP23XX_INTB;
+	} else if (pci_interrupt & (1 << 27)) {
+		irqno = IRQ_IXP23XX_INTA;
+	} else {
+		BUG();
+	}
+
+	int_desc = irq_desc + irqno;
+	int_desc->handle(irqno, int_desc, regs);
+
+	desc->chip->unmask(irq);
+}
+
+static struct irqchip ixp23xx_pci_irq_chip = {
+	.ack	= ixp23xx_pci_irq_mask,
+	.mask	= ixp23xx_pci_irq_mask,
+	.unmask	= ixp23xx_pci_irq_unmask
+};
+
+static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
+{
+	switch (type) {
+	case IXP23XX_IRQ_LEVEL:
+		set_irq_chip(irq, &ixp23xx_irq_level_chip);
+		set_irq_handler(irq, do_level_IRQ);
+		break;
+	case IXP23XX_IRQ_EDGE:
+		set_irq_chip(irq, &ixp23xx_irq_edge_chip);
+		set_irq_handler(irq, do_edge_IRQ);
+		break;
+	}
+	set_irq_flags(irq, IRQF_VALID);
+}
+
+void __init ixp23xx_init_irq(void)
+{
+	int irq;
+
+	/* Route everything to IRQ */
+	*IXP23XX_INTR_SEL1 = 0x0;
+	*IXP23XX_INTR_SEL2 = 0x0;
+	*IXP23XX_INTR_SEL3 = 0x0;
+	*IXP23XX_INTR_SEL4 = 0x0;
+
+	/* Mask all sources */
+	*IXP23XX_INTR_EN1 = 0x0;
+	*IXP23XX_INTR_EN2 = 0x0;
+	*IXP23XX_INTR_EN3 = 0x0;
+	*IXP23XX_INTR_EN4 = 0x0;
+
+	/*
+	 * Configure all IRQs for level-sensitive operation
+	 */
+	for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
+		ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
+	}
+
+	for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
+		set_irq_chip(irq, &ixp23xx_pci_irq_chip);
+		set_irq_handler(irq, do_level_IRQ);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
+}
+
+
+/*************************************************************************
+ * Timer-tick functions for IXP23xx
+ *************************************************************************/
+#define CLOCK_TICKS_PER_USEC	CLOCK_TICK_RATE / (USEC_PER_SEC)
+
+static unsigned long next_jiffy_time;
+
+static unsigned long
+ixp23xx_gettimeoffset(void)
+{
+	unsigned long elapsed;
+
+	elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
+
+	return elapsed / CLOCK_TICKS_PER_USEC;
+}
+
+static irqreturn_t
+ixp23xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* Clear Pending Interrupt by writing '1' to it */
+	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+	while ((*IXP23XX_TIMER_CONT - next_jiffy_time) > LATCH) {
+		timer_tick(regs);
+		next_jiffy_time += LATCH;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction ixp23xx_timer_irq = {
+	.name		= "IXP23xx Timer Tick",
+	.handler	= ixp23xx_timer_interrupt,
+	.flags		= SA_INTERRUPT | SA_TIMER,
+};
+
+void __init ixp23xx_init_timer(void)
+{
+	/* Clear Pending Interrupt by writing '1' to it */
+	*IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
+
+	/* Setup the Timer counter value */
+	*IXP23XX_TIMER1_RELOAD =
+		(LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
+
+	*IXP23XX_TIMER_CONT = 0;
+	next_jiffy_time = LATCH;
+
+	/* Connect the interrupt handler and enable the interrupt */
+	setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
+}
+
+struct sys_timer ixp23xx_timer = {
+	.init		= ixp23xx_init_timer,
+	.offset		= ixp23xx_gettimeoffset,
+};
+
+
+/*************************************************************************
+ * IXP23xx Platform Initializaion
+ *************************************************************************/
+static struct resource ixp23xx_uart_resources[] = {
+	{
+		.start		= IXP23XX_UART1_PHYS,
+		.end		= IXP23XX_UART1_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}, {
+		.start		= IXP23XX_UART2_PHYS,
+		.end		= IXP23XX_UART2_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM
+	}
+};
+
+static struct plat_serial8250_port ixp23xx_uart_data[] = {
+	{
+		.mapbase	= IXP23XX_UART1_PHYS,
+		.membase	= (char *)(IXP23XX_UART1_VIRT + 3),
+		.irq		= IRQ_IXP23XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP23XX_UART_XTAL,
+	}, {
+		.mapbase	= IXP23XX_UART2_PHYS,
+		.membase	= (char *)(IXP23XX_UART2_VIRT + 3),
+		.irq		= IRQ_IXP23XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP23XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device ixp23xx_uart = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev.platform_data	= ixp23xx_uart_data,
+	.num_resources		= 2,
+	.resource		= ixp23xx_uart_resources,
+};
+
+static struct platform_device *ixp23xx_devices[] __initdata = {
+	&ixp23xx_uart,
+};
+
+void __init ixp23xx_sys_init(void)
+{
+	platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
+}

arch/arm/mach-ixp23xx/espresso.c

@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-ixp23xx/espresso.c
+ *
+ * Double Espresso-specific routines
+ *
+ * Author: Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+static void __init espresso_init(void)
+{
+	physmap_configure(0x90000000, 0x02000000, 2, NULL);
+
+	/*
+	 * Mark flash as writeable.
+	 */
+	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+
+	ixp23xx_sys_init();
+}
+
+MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
+	/* Maintainer: Lennert Buytenhek */
+	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
+	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+	.map_io		= ixp23xx_map_io,
+	.init_irq	= ixp23xx_init_irq,
+	.timer		= &ixp23xx_timer,
+	.boot_params	= 0x00000100,
+	.init_machine	= espresso_init,
+MACHINE_END

arch/arm/mach-ixp23xx/ixdp2351.c

@@ -0,0 +1,325 @@
+/*
+ * arch/arm/mach-ixp23xx/ixdp2351.c
+ *
+ * IXDP2351 board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2004 (c) Intel Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+/*
+ * IXDP2351 Interrupt Handling
+ */
+static void ixdp2351_inta_mask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_unmask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq);
+}
+
+static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	u16 ex_interrupt =
+		*IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID;
+	int i;
+
+	desc->chip->mask(irq);
+
+	for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
+		if (ex_interrupt & (1 << i)) {
+			struct irqdesc *cpld_desc;
+			int cpld_irq =
+				IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
+			cpld_desc = irq_desc + cpld_irq;
+			cpld_desc->handle(cpld_irq, cpld_desc, regs);
+		}
+	}
+
+	desc->chip->unmask(irq);
+}
+
+static struct irqchip ixdp2351_inta_chip = {
+	.ack	= ixdp2351_inta_mask,
+	.mask	= ixdp2351_inta_mask,
+	.unmask	= ixdp2351_inta_unmask
+};
+
+static void ixdp2351_intb_mask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_unmask(unsigned int irq)
+{
+	*IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq);
+}
+
+static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	u16 ex_interrupt =
+		*IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID;
+	int i;
+
+	desc->chip->ack(irq);
+
+	for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
+		if (ex_interrupt & (1 << i)) {
+			struct irqdesc *cpld_desc;
+			int cpld_irq =
+				IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
+			cpld_desc = irq_desc + cpld_irq;
+			cpld_desc->handle(cpld_irq, cpld_desc, regs);
+		}
+	}
+
+	desc->chip->unmask(irq);
+}
+
+static struct irqchip ixdp2351_intb_chip = {
+	.ack	= ixdp2351_intb_mask,
+	.mask	= ixdp2351_intb_mask,
+	.unmask	= ixdp2351_intb_unmask
+};
+
+void ixdp2351_init_irq(void)
+{
+	int irq;
+
+	/* Mask all interrupts from CPLD, disable simulation */
+	*IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1;
+	*IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1;
+	*IXDP2351_CPLD_INTA_SIM_REG = 0;
+	*IXDP2351_CPLD_INTB_SIM_REG = 0;
+
+	ixp23xx_init_irq();
+
+	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE);
+	     irq <
+	     IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM);
+	     irq++) {
+		if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) {
+			set_irq_flags(irq, IRQF_VALID);
+			set_irq_handler(irq, do_level_IRQ);
+			set_irq_chip(irq, &ixdp2351_inta_chip);
+		}
+	}
+
+	for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE);
+	     irq <
+	     IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM);
+	     irq++) {
+		if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) {
+			set_irq_flags(irq, IRQF_VALID);
+			set_irq_handler(irq, do_level_IRQ);
+			set_irq_chip(irq, &ixdp2351_intb_chip);
+		}
+	}
+
+	set_irq_chained_handler(IRQ_IXP23XX_INTA, &ixdp2351_inta_handler);
+	set_irq_chained_handler(IRQ_IXP23XX_INTB, &ixdp2351_intb_handler);
+}
+
+/*
+ * IXDP2351 PCI
+ */
+
+/*
+ * This board does not do normal PCI IRQ routing, or any
+ * sort of swizzling, so we just need to check where on the
+ * bus the device is and figure out what CPLD pin it is
+ * being routed to.
+ */
+#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
+
+static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	u8 bus = dev->bus->number;
+	u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
+	struct pci_bus *tmp_bus = dev->bus;
+
+	/* Primary bus, no interrupts here */
+	if (!bus)
+		return -1;
+
+	/* Lookup first leaf in bus tree */
+	while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL))
+		tmp_bus = tmp_bus->parent;
+
+	/* Select between known bridges */
+	switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
+		/* Device is located after first bridge */
+	case 0x0008:
+		if (tmp_bus == dev->bus) {
+			/* Device is located directy after first bridge */
+			switch (devpin) {
+				/* Onboard 82546 */
+			case DEVPIN(1, 1):	/* Onboard 82546 ch 0 */
+				return IRQ_IXDP2351_INTA_82546;
+			case DEVPIN(1, 2):	/* Onboard 82546 ch 1 */
+				return IRQ_IXDP2351_INTB_82546;
+				/* PMC SLOT */
+			case DEVPIN(0, 1):	/* PMCP INTA# */
+			case DEVPIN(2, 4):	/* PMCS INTD# */
+				return IRQ_IXDP2351_SPCI_PMC_INTA;
+			case DEVPIN(0, 2):	/* PMCP INTB# */
+			case DEVPIN(2, 1):	/* PMCS INTA# */
+				return IRQ_IXDP2351_SPCI_PMC_INTB;
+			case DEVPIN(0, 3):	/* PMCP INTC# */
+			case DEVPIN(2, 2):	/* PMCS INTB# */
+				return IRQ_IXDP2351_SPCI_PMC_INTC;
+			case DEVPIN(0, 4):	/* PMCP INTD# */
+			case DEVPIN(2, 3):	/* PMCS INTC# */
+				return IRQ_IXDP2351_SPCI_PMC_INTD;
+			}
+		} else {
+			/* Device is located indirectly after first bridge */
+			/* Not supported now */
+			return -1;
+		}
+		break;
+	case 0x0010:
+		if (tmp_bus == dev->bus) {
+			/* Device is located directy after second bridge */
+			/* Secondary bus of second bridge */
+			switch (devpin) {
+			case DEVPIN(0, 1):	/* DB#0 */
+			case DEVPIN(0, 2):
+			case DEVPIN(0, 3):
+			case DEVPIN(0, 4):
+				return IRQ_IXDP2351_SPCI_DB_0;
+			case DEVPIN(1, 1):	/* DB#1 */
+			case DEVPIN(1, 2):
+			case DEVPIN(1, 3):
+			case DEVPIN(1, 4):
+				return IRQ_IXDP2351_SPCI_DB_1;
+			case DEVPIN(2, 1):	/* FIC1 */
+			case DEVPIN(2, 2):
+			case DEVPIN(2, 3):
+			case DEVPIN(2, 4):
+			case DEVPIN(3, 1):	/* FIC2 */
+			case DEVPIN(3, 2):
+			case DEVPIN(3, 3):
+			case DEVPIN(3, 4):
+				return IRQ_IXDP2351_SPCI_FIC;
+			}
+		} else {
+			/* Device is located indirectly after second bridge */
+			/* Not supported now */
+			return -1;
+		}
+		break;
+	}
+
+	return -1;
+}
+
+struct hw_pci ixdp2351_pci __initdata = {
+	.nr_controllers	= 1,
+	.preinit	= ixp23xx_pci_preinit,
+	.setup		= ixp23xx_pci_setup,
+	.scan		= ixp23xx_pci_scan_bus,
+	.map_irq	= ixdp2351_map_irq,
+};
+
+int __init ixdp2351_pci_init(void)
+{
+	if (machine_is_ixdp2351())
+		pci_common_init(&ixdp2351_pci);
+
+	return 0;
+}
+
+subsys_initcall(ixdp2351_pci_init);
+
+/*
+ * IXDP2351 Static Mapped I/O
+ */
+static struct map_desc ixdp2351_io_desc[] __initdata = {
+	{
+		.virtual	= IXDP2351_NP_VIRT_BASE,
+		.pfn		= __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE),
+		.length		= IXDP2351_NP_PHYS_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IXDP2351_BB_BASE_VIRT,
+		.pfn		= __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS),
+		.length		= IXDP2351_BB_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init ixdp2351_map_io(void)
+{
+	ixp23xx_map_io();
+	iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc));
+}
+
+static void __init ixdp2351_init(void)
+{
+	physmap_configure(0x90000000, 0x04000000, 1, NULL);
+
+	/*
+	 * Mark flash as writeable
+	 */
+	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+	ixp23xx_sys_init();
+}
+
+MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
+	/* Maintainer: MontaVista Software, Inc. */
+	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
+	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+	.map_io		= ixdp2351_map_io,
+	.init_irq	= ixdp2351_init_irq,
+	.timer		= &ixp23xx_timer,
+	.boot_params	= 0x00000100,
+	.init_machine	= ixdp2351_init,
+MACHINE_END

arch/arm/mach-ixp23xx/pci.c

@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-ixp23xx/pci.c
+ *
+ * PCI routines for IXP23XX based systems
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * based on original code:
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Copyright 2002-2005 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+extern int (*external_fault) (unsigned long, struct pt_regs *);
+
+static int pci_master_aborts = 0;
+
+#ifdef DEBUG
+#define DBG(x...)	printk(x)
+#else
+#define DBG(x...)
+#endif
+
+int clear_master_aborts(void);
+
+static u32
+*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
+{
+	u32 *paddress;
+
+	/*
+	 * Must be dword aligned
+	 */
+	where &= ~3;
+
+	/*
+	 * For top bus, generate type 0, else type 1
+	 */
+	if (!bus_nr) {
+		if (PCI_SLOT(devfn) >= 8)
+			return 0;
+
+		paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
+				    | (1 << (PCI_SLOT(devfn) + 16))
+				    | (PCI_FUNC(devfn) << 8) | where);
+	} else {
+		paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
+				    | (bus_nr << 16)
+				    | (PCI_SLOT(devfn) << 11)
+				    | (PCI_FUNC(devfn) << 8) | where);
+	}
+
+	return paddress;
+}
+
+/*
+ * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
+ * 0 and 3 are not valid indexes...
+ */
+static u32 bytemask[] = {
+	/*0*/	0,
+	/*1*/	0xff,
+	/*2*/	0xffff,
+	/*3*/	0,
+	/*4*/	0xffffffff,
+};
+
+static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+				int where, int size, u32 *value)
+{
+	u32 n;
+	u32 *addr;
+
+	n = where % 4;
+
+	DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
+		bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	pci_master_aborts = 0;
+	*value = (*addr >> (8*n)) & bytemask[size];
+	if (pci_master_aborts) {
+			pci_master_aborts = 0;
+			*value = 0xffffffff;
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * We don't do error checking on the address for writes.
+ * It's assumed that the user checked for the device existing first
+ * by doing a read first.
+ */
+static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+					int where, int size, u32 value)
+{
+	u32 mask;
+	u32 *addr;
+	u32 temp;
+
+	mask = ~(bytemask[size] << ((where % 0x4) * 8));
+	addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+	if (!addr)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	temp = (u32) (value) << ((where % 0x4) * 8);
+	*addr = (*addr & mask) | temp;
+
+	clear_master_aborts();
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops ixp23xx_pci_ops = {
+	.read	= ixp23xx_pci_read_config,
+	.write	= ixp23xx_pci_write_config,
+};
+
+struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+{
+	return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
+}
+
+int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	volatile unsigned long temp;
+	unsigned long flags;
+
+	pci_master_aborts = 1;
+
+	local_irq_save(flags);
+	temp = *IXP23XX_PCI_CONTROL;
+
+	/*
+	 * master abort and cmd tgt err
+	 */
+	if (temp & ((1 << 8) | (1 << 5)))
+		*IXP23XX_PCI_CONTROL = temp;
+
+	temp = *IXP23XX_PCI_CMDSTAT;
+
+	if (temp & (1 << 29))
+		*IXP23XX_PCI_CMDSTAT = temp;
+	local_irq_restore(flags);
+
+	/*
+	 * If it was an imprecise abort, then we need to correct the
+	 * return address to be _after_ the instruction.
+	 */
+	if (fsr & (1 << 10))
+		regs->ARM_pc += 4;
+
+	return 0;
+}
+
+int clear_master_aborts(void)
+{
+	volatile u32 temp;
+
+	temp = *IXP23XX_PCI_CONTROL;
+
+	/*
+	 * master abort and cmd tgt err
+	 */
+	if (temp & ((1 << 8) | (1 << 5)))
+		*IXP23XX_PCI_CONTROL = temp;
+
+	temp = *IXP23XX_PCI_CMDSTAT;
+
+	if (temp & (1 << 29))
+		*IXP23XX_PCI_CMDSTAT = temp;
+
+	return 0;
+}
+
+void __init ixp23xx_pci_preinit(void)
+{
+#ifdef __ARMEB__
+	*IXP23XX_PCI_CONTROL |= 0x20000;	/* set I/O swapping */
+#endif
+	/*
+	 * ADDR_31 needs to be clear for PCI memory access to CPP memory
+	 */
+	*IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
+	*IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
+
+	/*
+	 * Select correct memory for PCI inbound transactions
+	 */
+	if (ixp23xx_cpp_boot()) {
+		*IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
+	} else {
+		*IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
+	}
+
+	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS,
+			"PCI config cycle to non-existent device");
+
+	*IXP23XX_PCI_ADDR_EXT = 0x0000e000;
+}
+
+/*
+ * Prevent PCI layer from seeing the inbound host-bridge resources
+ */
+static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
+{
+	int i;
+
+	dev->class &= 0xff;
+	dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+		dev->resource[i].start = 0;
+		dev->resource[i].end   = 0;
+		dev->resource[i].flags = 0;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
+
+/*
+ * IXP2300 systems often have large resource requirements, so we just
+ * use our own resource space.
+ */
+static struct resource ixp23xx_pci_mem_space = {
+	.start	= IXP23XX_PCI_MEM_START,
+	.end	= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+	.name	= "PCI Mem Space"
+};
+
+static struct resource ixp23xx_pci_io_space = {
+	.start	= 0x00000100,
+	.end	= 0x01ffffff,
+	.flags	= IORESOURCE_IO,
+	.name	= "PCI I/O Space"
+};
+
+int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+	if (nr >= 1)
+		return 0;
+
+	sys->resource[0] = &ixp23xx_pci_io_space;
+	sys->resource[1] = &ixp23xx_pci_mem_space;
+	sys->resource[2] = NULL;
+
+	return 1;
+}

arch/arm/mach-ixp23xx/roadrunner.c

@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-ixp23xx/roadrunner.c
+ *
+ * RoadRunner board-specific routines
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/tlbflush.h>
+#include <asm/pgtable.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/pci.h>
+
+/*
+ * Interrupt mapping
+ */
+#define INTA		IRQ_ROADRUNNER_PCI_INTA
+#define INTB		IRQ_ROADRUNNER_PCI_INTB
+#define INTC		IRQ_ROADRUNNER_PCI_INTC
+#define INTD		IRQ_ROADRUNNER_PCI_INTD
+
+#define INTC_PIN	IXP23XX_GPIO_PIN_11
+#define INTD_PIN	IXP23XX_GPIO_PIN_12
+
+static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
+{
+	static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
+	static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
+	static int usb_irq[] = {INTB, INTC, INTD, -1};
+	static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
+	static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
+
+	switch(dev->bus->number) {
+		case 0:
+			switch(dev->devfn) {
+			case 0x0: // PCI-PCI bridge
+				break;
+			case 0x8: // PCI Card Slot
+				return pci_card_slot_irq[pin - 1];
+			case 0x10: // PMC Slot
+				return pmc_card_slot_irq[pin - 1];
+			case 0x18: // PMC Slot Secondary Agent
+				break;
+			case 0x20: // IXP Processor
+				break;
+			default:
+				return NO_IRQ;
+			}
+			break;
+
+		case 1:
+			switch(dev->devfn) {
+			case 0x0: // IDE Controller
+				return (pin == 1) ? INTC : -1;
+			case 0x8: // USB fun 0
+			case 0x9: // USB fun 1
+			case 0xa: // USB fun 2
+				return usb_irq[pin - 1];
+			case 0x10: // Mini PCI 1
+				return mini_pci_1_irq[pin-1];
+			case 0x18: // Mini PCI 2
+				return mini_pci_2_irq[pin-1];
+			case 0x20: // MEM slot
+				return (pin == 1) ? INTA : -1;
+			default:
+				return NO_IRQ;
+			}
+			break;
+
+		default:
+			return NO_IRQ;
+	}
+
+	return NO_IRQ;
+}
+
+static void roadrunner_pci_preinit(void)
+{
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+
+	ixp23xx_pci_preinit();
+}
+
+static struct hw_pci roadrunner_pci __initdata = {
+	.nr_controllers	= 1,
+	.preinit	= roadrunner_pci_preinit,
+	.setup		= ixp23xx_pci_setup,
+	.scan		= ixp23xx_pci_scan_bus,
+	.map_irq	= roadrunner_map_irq,
+};
+
+static int __init roadrunner_pci_init(void)
+{
+	if (machine_is_roadrunner())
+		pci_common_init(&roadrunner_pci);
+
+	return 0;
+};
+
+subsys_initcall(roadrunner_pci_init);
+
+static void __init roadrunner_init(void)
+{
+	physmap_configure(0x90000000, 0x04000000, 2, NULL);
+
+	/*
+	 * Mark flash as writeable
+	 */
+	IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
+	IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
+
+	ixp23xx_sys_init();
+}
+
+MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
+	/* Maintainer: Deepak Saxena */
+	.phys_io	= IXP23XX_PERIPHERAL_PHYS,
+	.io_pg_offst	= ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc,
+	.map_io		= ixp23xx_map_io,
+	.init_irq	= ixp23xx_init_irq,
+	.timer		= &ixp23xx_timer,
+	.boot_params	= 0x00000100,
+	.init_machine	= roadrunner_init,
+MACHINE_END

arch/arm/mach-omap1/board-netstar.c

@@ -141,7 +141,7 @@ static int __init netstar_late_init(void)
 	/* TODO: Setup front panel switch here */
 
 	/* Setup panic notifier */
-	notifier_chain_register(&panic_notifier_list, &panic_block);
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
 
 	return 0;
 }

arch/arm/mach-omap1/board-voiceblue.c

@@ -235,7 +235,7 @@ static struct notifier_block panic_block = {
 static int __init voiceblue_setup(void)
 {
 	/* Setup panic notifier */
-	notifier_chain_register(&panic_notifier_list, &panic_block);
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
 
 	return 0;
 }

arch/arm/mach-omap2/serial.c

@@ -167,7 +167,7 @@ void __init omap_serial_init()
 
 static struct platform_device serial_device = {
 	.name			= "serial8250",
-	.id			= 0,
+	.id			= PLAT8250_DEV_PLATFORM,
 	.dev			= {
 		.platform_data	= serial_platform_data,
 	},

arch/arm/mach-pxa/Kconfig

@@ -10,6 +10,11 @@ config ARCH_LUBBOCK
 	select PXA25x
 	select SA1111
 
+config MACH_LOGICPD_PXA270
+	bool "LogicPD PXA270 Card Engine Development Platform"
+	select PXA27x
+	select IWMMXT
+
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform"
 	select PXA27x