sh: se7206: Make the I/O port routines less stupid.

The port routines were logically inverted, and the MRSHPC range had
no upper bound, causing 8 and 16-bit port I/O to get mangled.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/se/7206/io.c

@@ -26,22 +26,22 @@ static inline void delay(void)
 static inline volatile __u16 *
 port2adr(unsigned int port)
 {
-	if (port >= 0x2000)
+	if (port >= 0x2000 && port < 0x2020)
 		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x300 || port < 0x310)
+	else if (port >= 0x300 && port < 0x310)
 		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
 }
 
 unsigned char se7206_inb(unsigned long port)
 {
-	return (*port2adr(port))&0xff; 
+	return (*port2adr(port)) & 0xff;
 }
 
 unsigned char se7206_inb_p(unsigned long port)
 {
 	unsigned long v;
 
-	v = (*port2adr(port))&0xff; 
+	v = (*port2adr(port)) & 0xff;
 	delay();
 	return v;
 }
@@ -51,12 +51,6 @@ unsigned short se7206_inw(unsigned long port)
 	return *port2adr(port);;
 }
 
-unsigned int se7206_inl(unsigned long port)
-{
-	maybebadio(port);
-	return 0;
-}
-
 void se7206_outb(unsigned char value, unsigned long port)
 {
 	*(port2adr(port)) = value;
@@ -73,11 +67,6 @@ void se7206_outw(unsigned short value, unsigned long port)
 	*port2adr(port) = value;
 }
 
-void se7206_outl(unsigned int value, unsigned long port)
-{
-	maybebadio(port);
-}
-
 void se7206_insb(unsigned long port, void *addr, unsigned long count)
 {
 	volatile __u16 *p = port2adr(port);
@@ -95,11 +84,6 @@ void se7206_insw(unsigned long port, void *addr, unsigned long count)
 		*ap++ = *p;
 }
 
-void se7206_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
 void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
 {
 	volatile __u16 *p = port2adr(port);
@@ -116,8 +100,3 @@ void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
 	while (count--)
 		*p = *ap++;
 }
-
-void se7206_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}

arch/sh/boards/se/7206/setup.c

@@ -6,9 +6,7 @@
  * Copyright (C) 2007  Paul Mundt
  *
  * Hitachi 7206 SolutionEngine Support.
- *
  */
-
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/se7206.h>
@@ -81,24 +79,18 @@ static struct sh_machine_vector mv_se __initmv = {
 	.mv_nr_irqs		= 256,
 	.mv_inb			= se7206_inb,
 	.mv_inw			= se7206_inw,
-	.mv_inl			= se7206_inl,
 	.mv_outb		= se7206_outb,
 	.mv_outw		= se7206_outw,
-	.mv_outl		= se7206_outl,
 
 	.mv_inb_p		= se7206_inb_p,
 	.mv_inw_p		= se7206_inw,
-	.mv_inl_p		= se7206_inl,
 	.mv_outb_p		= se7206_outb_p,
 	.mv_outw_p		= se7206_outw,
-	.mv_outl_p		= se7206_outl,
 
 	.mv_insb		= se7206_insb,
 	.mv_insw		= se7206_insw,
-	.mv_insl		= se7206_insl,
 	.mv_outsb		= se7206_outsb,
 	.mv_outsw		= se7206_outsw,
-	.mv_outsl		= se7206_outsl,
 
 	.mv_init_irq		= init_se7206_IRQ,
 };