Merge branch 'linus' into irq/core

Reason: Get upstream fixes integrated before further modifications.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Documentation/devicetree/bindings/gpio/led.txt

@@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device.  Each
 node's name represents the name of the corresponding LED.
 
 LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
-  for devices" in Documentation/devicetree/booting-without-of.txt.  Active
-  low LEDs should be indicated using flags in the GPIO specifier.
+- gpios :  Should specify the LED's GPIO, see "gpios property" in
+  Documentation/devicetree/gpio.txt.  Active low LEDs should be
+  indicated using flags in the GPIO specifier.
 - label :  (optional) The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
 - linux,default-trigger :  (optional) This parameter, if present, is a

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -30,6 +30,7 @@ national	National Semiconductor
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+picochip	Picochip Ltd
 powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International

Documentation/hwmon/jc42

@@ -7,21 +7,29 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
-  * IDT TSE2002B3, TS3000B3
-    Prefix: 'tse2002b3', 'ts3000b3'
+  * Atmel AT30TS00
+    Prefix: 'at30ts00'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
-	http://www.idt.com/products/getdoc.cfm?docid=18715691
-	http://www.idt.com/products/getdoc.cfm?docid=18715692
+	http://www.atmel.com/Images/doc8585.pdf
+  * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+    Prefix: 'tse2002', 'ts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
   * Maxim MAX6604
     Prefix: 'max6604'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
-    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
+    Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@@ -48,6 +56,12 @@ Supported chips:
     Datasheets:
 	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
 	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+  * ST Microelectronics STTS2002, STTS3000
+    Prefix: 'stts2002', 'stts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f

Documentation/input/alps.txt

@@ -13,7 +13,8 @@ Detection
 
 All ALPS touchpads should respond to the "E6 report" command sequence:
 E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
-00-00-64.
+00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
+if some buttons are pressed.
 
 If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is

Documentation/kernel-parameters.txt

@@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			default: off.
 
+	printk.always_kmsg_dump=
+			Trigger kmsg_dump for cases other than kernel oops or
+			panics
+			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
+			default: disabled
+
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 

MAINTAINERS

@@ -269,7 +269,6 @@ S:	Orphan
 F:	drivers/platform/x86/wmi.c
 
 AD1889 ALSA SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 M:	Thibaut Varene <T-Bone@parisc-linux.org>
 W:	http://wiki.parisc-linux.org/AD1889
 L:	linux-parisc@vger.kernel.org
@@ -963,7 +962,7 @@ F:	drivers/tty/serial/msm_serial.c
 F:	drivers/platform/msm/
 F:	drivers/*/pm8???-*
 F:	include/linux/mfd/pm8xxx/
-T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -1311,7 +1310,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1319,7 +1318,7 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
@@ -3047,7 +3046,6 @@ F:	drivers/hwspinlock/hwspinlock_*
 F:	include/linux/hwspinlock.h
 
 HARMONY SOUND DRIVER
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/parisc/harmony.*
@@ -3782,7 +3780,7 @@ F:	Documentation/kdump/
 
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
 M:	Ian Kent <raven@themaw.net>
-L:	autofs@linux.kernel.org
+L:	autofs@vger.kernel.org
 S:	Maintained
 F:	fs/autofs4/
 
@@ -4687,7 +4685,7 @@ NTFS FILESYSTEM
 M:	Anton Altaparmakov <anton@tuxera.com>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.tuxera.com/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
 S:	Supported
 F:	Documentation/filesystems/ntfs.txt
 F:	fs/ntfs/
@@ -5000,9 +4998,8 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
-M:	Kyle McMartin <kyle@mcmartin.ca>
-M:	Helge Deller <deller@gmx.de>
 M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
+M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 Q:	http://patchwork.kernel.org/project/linux-parisc/list/
@@ -5861,7 +5858,7 @@ S:	Maintained
 F:	drivers/mmc/host/sdhci-spear.c
 
 SECURITY SUBSYSTEM
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
 W:	http://security.wiki.kernel.org/
@@ -5874,7 +5871,7 @@ S:	Supported
 
 SELINUX SECURITY MODULE
 M:	Stephen Smalley <sds@tycho.nsa.gov>
-M:	James Morris <jmorris@namei.org>
+M:	James Morris <james.l.morris@oracle.com>
 M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org
@@ -7274,7 +7271,7 @@ WATCHDOG DEVICE DRIVERS
 M:	Wim Van Sebroeck <wim@iguana.be>
 L:	linux-watchdog@vger.kernel.org
 W:	http://www.linux-watchdog.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
+T:	git git://www.linux-watchdog.org/linux-watchdog.git
 S:	Maintained
 F:	Documentation/watchdog/
 F:	drivers/watchdog/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/include/asm/futex.h

@@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
 
 	*uval = prev;

arch/arm/Kconfig

@@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  (r2p*) erratum. Under very rare conditions, a faulty
 	  optimisation in the Cortex-A9 Store Buffer may lead to data
 	  corruption. This workaround sets a specific bit in the diagnostic
 	  register of the Cortex-A9 which disables the Store Buffer

arch/arm/boot/.gitignore

@@ -3,3 +3,4 @@ zImage
 xipImage
 bootpImage
 uImage
+*.dtb

arch/arm/common/it8152.c

@@ -320,13 +320,6 @@ err0:
 	return -EBUSY;
 }
 
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PCI bus master devices
 */

arch/arm/common/pl330.c

@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active = thrd->req_running;
+	int ret = 0, active;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
 
 	pl330 = thrd->dmac;
+	active = thrd->req_running;
 
 	spin_lock_irqsave(&pl330->lock, flags);
 

arch/arm/include/asm/assembler.h

@@ -137,6 +137,11 @@
 	disable_irq
 	.endm
 
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.

arch/arm/include/asm/hardware/pl330.h

@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
 	DCCTRL1, /* Bufferable only */
 	DCCTRL2, /* Cacheable, but do not allocate */
 	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
+	DINVALID1,              /* AWCACHE = 0x1000 */
 	DINVALID2,
 	DCCTRL6, /* Cacheable write-through, allocate on writes only */
 	DCCTRL7, /* Cacheable write-back, allocate on writes only */

arch/arm/include/asm/pmu.h

@@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
-			int idx, int overflow);
+			int idx);
 
 int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,

arch/arm/include/asm/processor.h

@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \

arch/arm/kernel/ecard.c

@@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
 
 	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
 
+	vma.vm_flags = VM_EXEC;
 	vma.vm_mm = mm;
 
 	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);

arch/arm/kernel/perf_event.c

@@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
 u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx, int overflow)
+		    int idx)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	new_raw_count &= armpmu->max_period;
-	prev_raw_count &= armpmu->max_period;
-
-	if (overflow)
-		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-	else
-		delta = new_raw_count - prev_raw_count;
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx, 0);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
@@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx, 0);
+		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
 	hwc->config_base	    |= (unsigned long)mapping;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = armpmu->max_period;
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
 	armpmu->type = ARM_PMU_DEVICE_CPU;
 }
 
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+					unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+	.notifier_call = pmu_cpu_notify,
+};
+
 /*
  * CPU PMU identification and registration.
  */
@@ -730,6 +752,7 @@ init_hw_perf_events(void)
 		pr_info("enabled with %s PMU driver, %d counters available\n",
 			cpu_pmu->name, cpu_pmu->num_events);
 		cpu_pmu_init(cpu_pmu);
+		register_cpu_notifier(&pmu_cpu_notifier);
 		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
 	} else {
 		pr_info("no hardware support available\n");

arch/arm/kernel/perf_event_v6.c

@@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-	unsigned long mask = 0;
-	if (idx == ARMV6_CYCLE_COUNTER)
-		mask = ARMV6_PMCR_CCOUNT_IEN;
-	else if (idx == ARMV6_COUNTER0)
-		mask = ARMV6_PMCR_COUNT0_IEN;
-	else if (idx == ARMV6_COUNTER1)
-		mask = ARMV6_PMCR_COUNT1_IEN;
-
-	if (mask)
-		return pmcr & mask;
-
-	WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-	return 0;
-}
-
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
 		    void *dev)
@@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!counter_is_active(pmcr, idx))
+		/* Ignore if we don't have an event. */
+		if (!event)
 			continue;
 
 		/*
@@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_v7.c

@@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
 
 	counter = ARMV7_IDX_TO_COUNTER(idx);
 	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+	isb();
+
 	return idx;
 }
 
@@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
 		/*
 		 * We have a single interrupt for all counters. Check that
 		 * each counter has overflowed before we process it.
@@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_xscale.c

@@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+		if (!event)
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-	unsigned long flags, ien, evtsel;
+	unsigned long flags, ien, evtsel, of_flags;
 	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
 	ien = xscale2pmu_read_int_enable();
@@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	switch (idx) {
 	case XSCALE_CYCLE_COUNTER:
 		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		of_flags = XSCALE2_CCOUNT_OVERFLOW;
 		break;
 	case XSCALE_COUNTER0:
 		ien &= ~XSCALE2_COUNT0_INT_EN;
 		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		of_flags = XSCALE2_COUNT0_OVERFLOW;
 		break;
 	case XSCALE_COUNTER1:
 		ien &= ~XSCALE2_COUNT1_INT_EN;
 		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		of_flags = XSCALE2_COUNT1_OVERFLOW;
 		break;
 	case XSCALE_COUNTER2:
 		ien &= ~XSCALE2_COUNT2_INT_EN;
 		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		of_flags = XSCALE2_COUNT2_OVERFLOW;
 		break;
 	case XSCALE_COUNTER3:
 		ien &= ~XSCALE2_COUNT3_INT_EN;
 		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		of_flags = XSCALE2_COUNT3_OVERFLOW;
 		break;
 	default:
 		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
+	xscale2pmu_write_overflow_flags(of_flags);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 

arch/arm/kernel/ptrace.c

@@ -23,6 +23,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
+#include <linux/audit.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
@@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	if (!ip)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))

arch/arm/kernel/smp_twd.c

@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (!IS_ERR(twd_clk))
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -38,10 +38,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 8,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_DMA,
@@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9g45_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
-	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
-	platform_device_register(&at_hdmac_device);
+#if defined(CONFIG_OF)
+	struct device_node *of_node =
+		of_find_node_by_name(NULL, "dma-controller");
+
+	if (of_node)
+		of_node_put(of_node);
+	else
+#endif
+		platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -33,10 +33,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 2,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9rl_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -34,6 +34,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
 	.restart	= ep93xx_restart,

arch/arm/mach-exynos/mach-universal_c210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
 	.threshold	= 0x28,
 	.voltage	= 2800000,		/* 2.8V */
 	.orient		= MXT_DIAGONAL,
+	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
 static struct i2c_board_info i2c3_devs[] __initdata = {

arch/arm/mach-lpc32xx/include/mach/irqs.h

@@ -61,7 +61,7 @@
  */
 #define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
 #define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28		LPC32XX_SIC1_IRQ(4)
 #define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
 #define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
 #define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)

arch/arm/mach-lpc32xx/irq.c

@@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
 		.event_group = &lpc32xx_event_pin_regs,
 		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
 	},
+	[IRQ_LPC32XX_GPI_28] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+	},
 	[IRQ_LPC32XX_GPIO_00] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
@@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
 
 		if (state)
 			eventreg |= lpc32xx_events[d->irq].mask;
-		else
+		else {
 			eventreg &= ~lpc32xx_events[d->irq].mask;
 
+			/*
+			 * When disabling the wakeup, clear the latched
+			 * event
+			 */
+			__raw_writel(lpc32xx_events[d->irq].mask,
+				lpc32xx_events[d->irq].
+				event_group->rawstat_reg);
+		}
+
 		__raw_writel(eventreg,
 			lpc32xx_events[d->irq].event_group->enab_reg);
 
@@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void)
 
 	/* Setup SIC1 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
 
 	/* Setup SIC2 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
 
 	/* Configure supported IRQ's */
 	for (i = 0; i < NR_IRQS; i++) {

arch/arm/mach-lpc32xx/serial.c

@@ -88,6 +88,7 @@ struct uartinit {
 	char *uart_ck_name;
 	u32 ck_mode_mask;
 	void __iomem *pdiv_clk_reg;
+	resource_size_t mapbase;
 };
 
 static struct uartinit uartinit_data[] __initdata = {
@@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+		.mapbase = LPC32XX_UART5_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+		.mapbase = LPC32XX_UART3_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+		.mapbase = LPC32XX_UART4_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+		.mapbase = LPC32XX_UART6_BASE,
 	},
 #endif
 };
@@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void)
 
 		/* pre-UART clock divider set to 1 */
 		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+
+		/*
+		 * Force a flush of the RX FIFOs to work around a
+		 * HW bug
+		 */
+		puart = uartinit_data[i].mapbase;
+		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+		j = LPC32XX_SUART_FIFO_SIZE;
+		while (j--)
+			tmp = __raw_readl(
+				LPC32XX_UART_DLL_FIFO(puart));
+		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
 	}
 
 	/* This needs to be done after all UART clocks are setup */
 	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
-	for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 		/* Force a flush of the RX FIFOs to work around a HW bug */
 		puart = serial_std_platform_data[i].mapbase;
 		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));

arch/arm/mach-mmp/aspenite.c

@@ -17,7 +17,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-mmp/pxa168.c

@@ -24,7 +24,6 @@
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
 

arch/arm/mach-mmp/tavorevb.c

@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-omap1/board-innovator.c

@@ -416,13 +416,13 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1_usb_init(&innovator1510_usb_config);
-		innovator_config[1].data = &innovator1510_lcd_config;
+		innovator_config[0].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
 		omap1_usb_init(&h2_usb_config);
-		innovator_config[1].data = &innovator1610_lcd_config;
+		innovator_config[0].data = &innovator1610_lcd_config;
 	}
 #endif
 	omap_board_config = innovator_config;

arch/arm/mach-omap2/Kconfig

@@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
 	  going on could result in system crashes;
 
 config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
-	depends on ARCH_OMAP4 && BROKEN
+	bool "OMAP4 errata: Async Bridge Corruption"
+	depends on ARCH_OMAP4
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back

arch/arm/mach-omap2/board-n8x0.c

@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
+#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+	pr_warn("MMC: notify cover event not available\n");
+#endif
 }
 
 static int n8x0_mmc_late_init(struct device *dev)

arch/arm/mach-omap2/board-omap3evm.c

@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	platform_device_register(&leds_gpio);
 

arch/arm/mach-omap2/common.h

@@ -132,6 +132,7 @@ void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
 void ti81xx_map_io(void);
+void omap_barriers_init(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition

arch/arm/mach-omap2/cpuidle44xx.c

@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 cpu1_state;
 	int idle_time;
-	int new_state_idx;
 	int cpu_id = smp_processor_id();
 
 	/* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	 */
 	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
 	if (cpu1_state != PWRDM_POWER_OFF) {
-		new_state_idx = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+		index = drv->safe_state_index;
+		cx = cpuidle_get_statedata(&dev->states_usage[index]);
 	}
 
 	if (index > 0)

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -19,6 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.flags		= SMSC911X_USE_16BIT,
 };
 
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
+	.consumer_supplies	= gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+	.supply_name		= "gpmc_smsc911x",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
+	.init_data		= &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= 42,
+	.dev = {
+		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
+	},
+};
+
 /*
  * Initialize smsc911x device connected to the GPMC. Note that we
  * assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
+	ret = platform_device_register(&gpmc_smsc911x_regulator);
+	if (ret < 0) {
+		pr_err("Unable to register smsc911x regulators: %d\n", ret);
+		return;
+	}
+
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;

arch/arm/mach-omap2/hsmmc.c

@@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
+static int omap_hsmmc_done;
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
+	if (omap_hsmmc_done)
+		return;
+
+	omap_hsmmc_done = 1;
+
 	if (!cpu_is_omap44xx()) {
 		if (cpu_is_omap2430()) {
 			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;

arch/arm/mach-omap2/id.c

@@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
 		*cpu_rev = "1.0";
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:

arch/arm/mach-omap2/io.c

@@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 

arch/arm/mach-omap2/mailbox.c

@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+	&mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+	&mbox_iva_info,
+#endif
+	NULL
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)

arch/arm/mach-omap2/mux.c

@@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	return -ENODEV;
 }
 
-static int __init
+static int
 omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)

arch/arm/mach-omap2/omap-iommu.c

@@ -150,7 +150,8 @@ err_out:
 		platform_device_put(omap_iommu_pdev[i]);
 	return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {

arch/arm/mach-omap2/omap4-common.c

@@ -24,12 +24,14 @@
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
+#include <plat/omap-secure.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
 
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -43,6 +45,9 @@ static void __iomem *sar_ram_base;
 
 void __iomem *dram_sync, *sram_sync;
 
+static phys_addr_t paddr;
+static u32 size;
+
 void omap_bus_sync(void)
 {
 	if (dram_sync && sram_sync) {
@@ -51,19 +56,22 @@ void omap_bus_sync(void)
 		isb();
 	}
 }
+EXPORT_SYMBOL(omap_bus_sync);
 
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
 {
-	struct map_desc dram_io_desc[1];
-	phys_addr_t paddr;
-	u32 size;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
 
 	size = ALIGN(PAGE_SIZE, SZ_1M);
 	paddr = arm_memblock_steal(size, SZ_1M);
 
+	return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+	struct map_desc dram_io_desc[1];
+
 	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
 	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
 	dram_io_desc[0].length = size;
@@ -75,9 +83,10 @@ static int __init omap_barriers_init(void)
 	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
 		(long long) paddr, dram_io_desc[0].virtual);
 
-	return 0;
 }
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
 #endif
 
 void __init gic_init_irq(void)

arch/arm/mach-omap2/pm.c

@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	freq = clk->rate;
 	clk_put(clk);
 
+	rcu_read_lock();
 	opp = opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	bootup_volt = opp_get_voltage(opp);
+	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding "
 			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);

arch/arm/mach-omap2/twl-common.c

@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
 	.constraints = {
 		.min_uV			= 3300000,
 		.max_uV			= 3300000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE

arch/arm/mach-omap2/usb-host.c

@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 	struct omap_hwmod	*oh[2];
-	struct omap_device	*od;
+	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		return;
 	}
 
-	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
 				(void *)&usbhs_data, sizeof(usbhs_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
-	if (IS_ERR(od)) {
+	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod devices %s,%s\n",
 			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
 		return;

arch/arm/mach-omap2/voltagedomains3xxx_data.c

@@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	if (cpu_is_omap3630()) {
 		omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void)
 		omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
 	}
+#endif
 
 	if (cpu_is_omap3517() || cpu_is_omap3505())
 		voltdms = voltagedomains_am35xx;

arch/arm/mach-omap2/voltagedomains44xx_data.c

@@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
 	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
 	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
 
 	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
 		voltdm->sys_clk.name = sys_clk_name;

arch/arm/mach-pxa/generic.h

@@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #endif
 
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 

arch/arm/mach-pxa/hx4700.c

@@ -45,6 +45,7 @@
 #include <mach/hx4700.h>
 #include <mach/irda.h>
 
+#include <sound/ak4641.h>
 #include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
@@ -764,6 +765,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = {
 	},
 };
 
+/*
+ * Asahi Kasei AK4641 on I2C
+ */
+
+static struct ak4641_platform_data ak4641_info = {
+	.gpio_power = GPIO27_HX4700_CODEC_ON,
+	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ak4641", 0x12),
+		.platform_data = &ak4641_info,
+	},
+};
+
+static struct platform_device audio = {
+	.name	= "hx4700-audio",
+	.id	= -1,
+};
+
+
 /*
  * PCMCIA
  */
@@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = {
 	&gpio_vbus,
 	&power_supply,
 	&strataflash,
+	&audio,
 	&pcmcia,
 };
 
@@ -827,6 +851,7 @@ static void __init hx4700_init(void)
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
 	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
+	/* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+	pxa_last_gpio = 89;
+#else
+	pxa_last_gpio = 84;
+#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
@@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
+	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
 	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration

arch/arm/mach-pxa/pxa25x.c

@@ -25,7 +25,6 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
@@ -209,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -368,7 +368,6 @@ static int __init pxa25x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,

arch/arm/mach-pxa/pxa27x.c

@@ -22,7 +22,6 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
@@ -230,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -456,7 +456,6 @@ static int __init pxa27x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa3xx.c

@@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa95x.c

@@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
 			return ret;
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/saarb.c

@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/mfd/88pm860x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-pxa/sharpsl_pm.c

@@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = {
 #define MAXCTRL_SEL_SH   4
 #define MAXCTRL_STR      (1u << 7)
 
+extern int max1111_read_channel(int);
 /*
  * Read MAX1111 ADC
  */
@@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa())
 	    return 0;
 
-	extern int max1111_read_channel(int);
-
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */

arch/arm/mach-pxa/spitz_pm.c

@@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 static unsigned long spitz_charger_wakeup(void)
 {
 	unsigned long ret;
-	ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
 		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| (!gpio_get_value(SPITZ_GPIO_SYNC)
-		<< GPIO_bit(SPITZ_GPIO_SYNC));
+		| gpio_get_value(SPITZ_GPIO_SYNC));
 	return ret;
 }
 

arch/arm/mach-s3c2440/common.h

@@ -12,6 +12,6 @@
 #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
 #define __ARCH_ARM_MACH_S3C2440_COMMON_H
 
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
 
 #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */

arch/arm/mach-s3c2440/mach-anubis.c

@@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-at2440evb.c

@@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-gta02.c

@@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-nexcoder.c

@@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-osiris.c

@@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-rx1950.c

@@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-rx3715.c

@@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-smdk2440.c

@@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/s3c2440.c

@@ -35,7 +35,6 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
 	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
 	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
-
-void s3c2440_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		soft_restart(0);
-	}
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}

arch/arm/mach-s3c2440/s3c244x.c

@@ -46,6 +46,7 @@
 #include <plat/pm.h>
 #include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+	if (mode == 's')
+		soft_restart(0);
+
+	arch_wdt_reset();
+
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}

arch/arm/mach-shmobile/board-ag5evm.c

@@ -30,6 +30,7 @@
 #include <linux/serial_sci.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/mmc/host.h>
@@ -37,7 +38,6 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device mmc_device = {
@@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = {
 	},
 };
 
-#define DSI0PHYCR	0xe615006c
 static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 				 void __iomem *base,
 				 int enable)
 {
-	struct clk *pck;
+	struct clk *pck, *phy;
 	int ret;
 
 	pck = clk_get(&pdev->dev, "dsip_clk");
@@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 		goto sh_mipi_set_dot_clock_pck_err;
 	}
 
+	phy = clk_get(&pdev->dev, "dsiphy_clk");
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto sh_mipi_set_dot_clock_phy_err;
+	}
+
 	if (enable) {
 		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		__raw_writel(0x2a809010, DSI0PHYCR);
+		clk_set_rate(phy, clk_round_rate(pck, 510000000));
 		clk_enable(pck);
+		clk_enable(phy);
 	} else {
 		clk_disable(pck);
+		clk_disable(phy);
 	}
 
 	ret = 0;
 
+	clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
 	clk_put(pck);
-
 sh_mipi_set_dot_clock_pck_err:
 	return ret;
 }

arch/arm/mach-shmobile/board-ap4evb.c

@@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {

arch/arm/mach-shmobile/board-kota2.c

@@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = {
 static struct gpio_keys_platform_data gpio_key_info = {
 	.buttons        = gpio_buttons,
 	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-	.poll_interval  = 250, /* polled for now */
 };
 
 static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys-polled", /* polled for now */
+	.name   = "gpio-keys",
 	.id     = -1,
 	.dev    = {
 		.platform_data  = &gpio_key_info,

arch/arm/mach-shmobile/board-mackerel.c

@@ -43,7 +43,6 @@
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
 
@@ -145,11 +144,6 @@
  * 1-2 short | VBUS 5V       | Host
  * open      | external VBUS | Function
  *
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD	Host
- * CONFIG_USB_RENESAS_USBHS	Function
- *
  * CAUTION
  *
  * renesas_usbhs driver can use external interrupt mode
@@ -161,15 +155,6 @@
  * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
  * because Touchscreen is using IRQ7-PORT40.
  * It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
  */
 
 /*
@@ -207,6 +192,16 @@
  *
  */
 
+/*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
 /*
  * FIXME !!
  *
@@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = {
  * Use J30 to select between Host and Function. This setting
  * can however not be detected by software. Hotplug of USBHS1
  * is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ *  - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ *  - J30 "open"
+ *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
  */
 #define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on is supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS1",
-		.start	= 0xe68b0000,
-		.end	= 0xe68b00e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
 #define USB_PHY_MODE		(1 << 4)
 #define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
 #define USB_PHY_ON		(1 << 1)
@@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
 
 static int usbhs1_get_id(struct platform_device *pdev)
 {
-	return USBHS_GADGET;
+	return USBHS_HOST;
 }
 
 static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = {
 			.hardware_exit	= usbhs1_hardware_exit,
 			.get_id		= usbhs1_get_id,
 			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
 		},
 		.driver_param = {
 			.buswait_bwait	= 4,
@@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
@@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usb1_host_device,
 	&usbhs1_device,
 	&usbhs0_device,
 	&leds_device,
@@ -1473,9 +1423,6 @@ static void __init mackerel_init(void)
 	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
 	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
-	/* USB phy tweak to make the r8a66597_hcd host driver work */
-	__raw_writew(0x8a0a, 0xe6058130);       /* USBCR4 */
-
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = {
 			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
 };
 
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	/* FIXME */
+	if (!(value & 0x000B8000))
+		return clk->parent->rate;
+
+	value &= 0x3f;
+	value += 1;
+
+	if ((value < 12) ||
+	    (value > 33)) {
+		pr_err("DSIPHY has wrong value (%d)", value);
+		return 0;
+	}
+
+	return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+	value &= ~0x000B8000;
+
+	__raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+	u32 value;
+	int multi;
+
+	value = __raw_readl(clk->mapping->base);
+	multi = (value & 0x3f) + 1;
+
+	if ((multi < 12) || (multi > 33))
+		return -EIO;
+
+	__raw_writel(value | 0x000B8000, clk->mapping->base);
+
+	return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 value;
+	int idx;
+
+	idx = rate / clk->parent->rate;
+	if ((idx < 12) || (idx > 33))
+		return -EINVAL;
+
+	idx += -1;
+
+	value = __raw_readl(clk->mapping->base);
+	value = (value & ~0x3f) + idx;
+
+	__raw_writel(value, clk->mapping->base);
+
+	return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+	.recalc		= dsiphy_recalc,
+	.round_rate	= dsiphy_round_rate,
+	.set_rate	= dsiphy_set_rate,
+	.enable		= dsiphy_enable,
+	.disable	= dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+	.phys	= DSI0PHYCR,
+	.len	= 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+	.phys	= DSI1PHYCR,
+	.len	= 4,
+};
+
+static struct clk dsi0phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
+	.mapping	= &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
+	.mapping	= &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+	&dsi0phy_clk,
+	&dsi1phy_clk,
+};
+
 enum { MSTP001,
 	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
 	MSTP219,
@@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
+	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+		ret = clk_register(late_main_clks[k]);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)

arch/arm/mach-shmobile/include/mach/sh73a0.h

@@ -515,8 +515,8 @@ enum {
 	SHDMA_SLAVE_MMCIF_RX,
 };
 
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
 
 #endif /* __ASM_SH73A0_H__ */

arch/arm/mach-shmobile/intc-sh73a0.c

@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void)
 		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
 
 		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+		WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
 		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
 					      handle_level_irq, "level");
 		set_irq_flags(n, IRQF_VALID); /* yuck */

arch/arm/mach-shmobile/pfc-r8a7779.c

@@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    FN_AUDATA3, 0, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
-			     3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+			     3, 1, 1, 1, 1, 1, 1, 3, 3,
 			     1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
 	    /* IP4_31_29 [3] */
 	    FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,

arch/arm/mach-shmobile/pfc-sh7372.c

@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
 static struct pinmux_info sh7372_pinmux_info = {
 	.name = "sh7372_pfc",
 	.reserved_id = PINMUX_RESERVED,
@@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = {
 
 	.gpio_data = pinmux_data,
 	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq = pinmux_irqs,
+	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
 };
 
 void sh7372_pinmux_init(void)

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 	/* enable cache coherency */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
-	if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+	if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, __io(WUPCR));	/* wake up */
 	else
 		__raw_writel(1 << cpu, __io(SRESCR));	/* reset */

arch/arm/mach-ux500/Kconfig

@@ -5,7 +5,7 @@ config UX500_SOC_COMMON
 	default y
 	select ARM_GIC
 	select HAS_MTU
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 

arch/arm/mach-vexpress/Kconfig

@@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_GIC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 

arch/arm/mm/Kconfig

@@ -631,7 +631,8 @@ comment "Processor Features"
 
 config ARM_LPAE
 	bool "Support for the Large Physical Address Extension"
-	depends on MMU && CPU_V7
+	depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+		!CPU_32v4 && !CPU_32v3
 	help
 	  Say Y if you have an ARMv7 processor supporting the LPAE page
 	  table format and you would like to access memory beyond the

arch/arm/mm/cache-v7.S

@@ -55,7 +55,7 @@ loop1:
 	cmp	r1, #2				@ see what cache we have at this level
 	blt	skip				@ skip if no cache, or just i-cache
 #ifdef CONFIG_PREEMPT
-	save_and_disable_irqs r9		@ make cssr&csidr read atomic
+	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
 #endif
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
 	isb					@ isb to sych the new cssr&csidr

arch/arm/mm/proc-v7.S

@@ -230,9 +230,7 @@ __v7_setup:
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_743622
-	teq	r6, #0x20			@ present in r2p0
-	teqne	r6, #0x21			@ present in r2p1
-	teqne	r6, #0x22			@ present in r2p2
+	teq	r5, #0x00200000			@ only present in r2p*
 	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
 	orreq	r10, r10, #1 << 6		@ set bit #6
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register

arch/arm/plat-omap/common.c

@@ -69,6 +69,7 @@ void __init omap_reserve(void)
 	omap_vram_reserve_sdram_memblock();
 	omap_dsp_reserve_sdram_memblock();
 	omap_secure_ram_reserve_memblock();
+	omap_barrier_reserve_memblock();
 }
 
 void __init omap_init_consistent_dma_size(void)

arch/arm/plat-omap/include/plat/irqs.h

@@ -428,8 +428,16 @@
 #define OMAP_GPMC_NR_IRQS	8
 #define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
 
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE	(OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS	64
+#define OMAP_PRCM_IRQ_END	(OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END	OMAP_GPMC_IRQ_END
+#endif
 
-#define NR_IRQS			OMAP_GPMC_IRQ_END
+#define NR_IRQS			OMAP_PRCM_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 

arch/arm/plat-omap/include/plat/omap-secure.h

@@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
 { }
 #endif
 
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
 #endif /* __OMAP_SECURE_H__ */

arch/arm/plat-s3c24xx/dma.c

@@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
 	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
 	int channel;
 
-	for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
 		s3c2410_dma_resume_chan(cp);
 }
 

arch/arm/plat-samsung/devs.c

@@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
 static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
 	[1] = DEFINE_RES_IRQ(IRQ_OTG),
 };
 

arch/arm/plat-spear/time.c

@@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long cycles,
 				 struct clock_event_device *clk_event_dev)
 {
-	u16 val;
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	if (val & CTRL_ENABLE)
+		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
 
 	writew(cycles, gpt_base + LOAD(CLKEVT));
 
-	val = readw(gpt_base + CR(CLKEVT));
 	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 	writew(val, gpt_base + CR(CLKEVT));
 

arch/c6x/boot/Makefile

@@ -13,7 +13,7 @@ obj-y += linked_dtb.o
 endif
 
 $(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call cmd,dtc)
+	$(call if_changed_dep,dtc)
 
 quiet_cmd_cp = CP      $< $@$2
 	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)

arch/c6x/include/asm/processor.h

@@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
 
 extern unsigned long get_wchan(struct task_struct *p);
 
-#define KSTK_EIP(tsk)	(task_pt_regs(task)->pc)
-#define	KSTK_ESP(tsk)	(task_pt_regs(task)->sp)
+#define KSTK_EIP(task)	(task_pt_regs(task)->pc)
+#define KSTK_ESP(task)	(task_pt_regs(task)->sp)
 
 #define cpu_relax()		do { } while (0)
 

arch/m68k/include/asm/mcf_pgtable.h

@@ -78,7 +78,8 @@
 				 | CF_PAGE_READABLE \
 				 | CF_PAGE_WRITABLE \
 				 | CF_PAGE_EXEC \
-				 | CF_PAGE_SYSTEM)
+				 | CF_PAGE_SYSTEM \
+				 | CF_PAGE_SHARED)
 
 #define PAGE_COPY	__pgprot(CF_PAGE_VALID \
 				 | CF_PAGE_ACCESSED \

arch/m68k/mm/mcfmmu.c

@@ -87,7 +87,7 @@ void __init paging_init(void)
 
 int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 {
-	unsigned long flags, mmuar;
+	unsigned long flags, mmuar, mmutr;
 	struct mm_struct *mm;
 	pgd_t *pgd;
 	pmd_t *pmd;
@@ -137,9 +137,10 @@ int cf_tlb_miss(struct pt_regs *regs, int write, int dtlb, int extension_word)
 	if (!pte_dirty(*pte) && !KMAPAREA(mmuar))
 		set_pte(pte, pte_wrprotect(*pte));
 
-	mmu_write(MMUTR, (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) |
-		(((int)(pte->pte) & (int)CF_PAGE_MMUTR_MASK)
-		>> CF_PAGE_MMUTR_SHIFT) | MMUTR_V);
+	mmutr = (mmuar & PAGE_MASK) | (asid << MMUTR_IDN) | MMUTR_V;
+	if ((mmuar < TASK_UNMAPPED_BASE) || (mmuar >= TASK_SIZE))
+		mmutr |= (pte->pte & CF_PAGE_MMUTR_MASK) >> CF_PAGE_MMUTR_SHIFT;
+	mmu_write(MMUTR, mmutr);
 
 	mmu_write(MMUDR, (pte_val(*pte) & PAGE_MASK) |
 		((pte->pte) & CF_PAGE_MMUDR_MASK) | MMUDR_SZ_8KB | MMUDR_X);

arch/m68k/platform/coldfire/entry.S

@@ -136,7 +136,7 @@ Luser_return:
 	movel	%sp,%d1			/* get thread_info pointer */
 	andl	#-THREAD_SIZE,%d1	/* at base of kernel stack */
 	movel	%d1,%a0
-	movel	%a0@(TINFO_FLAGS),%d1	/* get thread_info->flags */
+	moveb	%a0@(TINFO_FLAGS+3),%d1	/* thread_info->flags (low 8 bits) */
 	jne	Lwork_to_do		/* still work to do */
 
 Lreturn:
@@ -148,8 +148,6 @@ Lwork_to_do:
 	btst	#TIF_NEED_RESCHED,%d1
 	jne	reschedule
 
-	/* GERG: do we need something here for TRACEing?? */
-
 Lsignal_return:
 	subql	#4,%sp			/* dummy return address */
 	SAVE_SWITCH_STACK