Merge branch 'omap-boards' into omap-for-linus

Documentation/DocBook/libata.tmpl

@@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
 	issue of SET FEATURES - XFER MODE, and prior to operation.
 	</para>
 	<para>
-	Called by ata_device_add() after ata_dev_identify() determines
-	a device is present.
-	</para>
-	<para>
 	This entry may be specified as NULL in ata_port_operations.
 	</para>
 
@@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
 
 	<sect2><title>Taskfile read/write</title>
 	<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
@@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	hardware registers / DMA buffers, to obtain the current set of
 	taskfile register values.
 	Most drivers for taskfile-based hardware (PIO or MMIO) use
-	ata_tf_load() and ata_tf_read() for these hooks.
+	ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
 	</para>
 
 	</sect2>
 
 	<sect2><title>PIO data read/write</title>
 	<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
 	</programlisting>
 
 	<para>
 All bmdma-style drivers must implement this hook.  This is the low-level
 operation that actually copies the data bytes during a PIO data
 transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
 	</para>
 
 	</sect2>
 
 	<sect2><title>ATA command execute</title>
 	<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
 	causes an ATA command, previously loaded with
 	->tf_load(), to be initiated in hardware.
-	Most drivers for taskfile-based hardware use ata_exec_command()
+	Most drivers for taskfile-based hardware use ata_sff_exec_command()
 	for this hook.
 	</para>
 
@@ -218,8 +213,8 @@ command.
 
 	<sect2><title>Read specific ATA shadow registers</title>
 	<programlisting>
-u8   (*check_status)(struct ata_port *ap);
-u8   (*check_altstatus)(struct ata_port *ap);
+u8   (*sff_check_status)(struct ata_port *ap);
+u8   (*sff_check_altstatus)(struct ata_port *ap);
 	</programlisting>
 
 	<para>
@@ -227,20 +222,14 @@ u8   (*check_altstatus)(struct ata_port *ap);
 	hardware.  On some hardware, reading the Status register has
 	the side effect of clearing the interrupt condition.
 	Most drivers for taskfile-based hardware use
-	ata_check_status() for this hook.
-	</para>
-	<para>
-	Note that because this is called from ata_device_add(), at
-	least a dummy function that clears device interrupts must be
-	provided for all drivers, even if the controller doesn't
-	actually have a taskfile status register.
+	ata_sff_check_status() for this hook.
 	</para>
 
 	</sect2>
 
 	<sect2><title>Select ATA device on bus</title>
 	<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
 	</programlisting>
 
 	<para>
@@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
 	</para>
 	<para>
 	Most drivers for taskfile-based hardware use
-	ata_std_dev_select() for this hook.  Controllers which do not
-	support second drives on a port (such as SATA contollers) will
-	use ata_noop_dev_select().
+	ata_sff_dev_select() for this hook.
 	</para>
 
 	</sect2>
@@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *);
 	to struct ata_host_set.
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_interrupt() for the
+	Most legacy IDE drivers use ata_sff_interrupt() for the
 	irq_handler hook, which scans all ports in the host_set,
 	determines which queued command was active (if any), and calls
-	ata_host_intr(ap,qc).
+	ata_sff_host_intr(ap,qc).
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+	Most legacy IDE drivers use ata_sff_irq_clear() for the
 	irq_clear() hook, which simply clears the interrupt and error
 	flags in the DMA status register.
 	</para>
@@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set);
 	data from port at this time.
 	</para>
 	<para>
-	Many drivers use ata_port_stop() as this hook, which frees the
-	PRD table.
-	</para>
-	<para>
 	->host_stop() is called after all ->port_stop() calls
 have completed.  The hook must finalize hardware shutdown, release DMA
 and other resources, etc.

Documentation/feature-removal-schedule.txt

@@ -589,3 +589,26 @@ Why:	Useful in 2003, implementation is a hack.
 	Generally invoked by accident today.
 	Seen as doing more harm than good.
 Who:	Len Brown <len.brown@intel.com>
+
+----------------------------
+
+What:	video4linux /dev/vtx teletext API support
+When:	2.6.35
+Files:	drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
+	include/linux/videotext.h
+Why:	The vtx device nodes have been superseded by vbi device nodes
+	for many years. No applications exist that use the vtx support.
+	Of the two i2c drivers that actually support this API the saa5249
+	has been impossible to use for a year now and no known hardware
+	that supports this device exists. The saa5246a is theoretically
+	supported by the old mxb boards, but it never actually worked.
+
+	In summary: there is no hardware that can use this API and there
+	are no applications actually implementing this API.
+
+	The vtx support still reserves minors 192-223 and we would really
+	like to reuse those for upcoming new functionality. In the unlikely
+	event that new hardware appears that wants to use the functionality
+	provided by the vtx API, then that functionality should be build
+	around the sliced VBI API instead.
+Who:	Hans Verkuil <hverkuil@xs4all.nl>

Documentation/i2c/writing-clients

@@ -74,6 +74,11 @@ structure at all.  You should use this to keep device-specific data.
 	/* retrieve the value */
 	void *i2c_get_clientdata(const struct i2c_client *client);
 
+Note that starting with kernel 2.6.34, you don't have to set the `data' field
+to NULL in remove() or if probe() failed anymore. The i2c-core does this
+automatically on these occasions. Those are also the only times the core will
+touch this field.
+
 
 Accessing the client
 ====================

Documentation/input/elantech.txt

@@ -333,14 +333,14 @@ byte 0:
 byte 1:
 
    bit   7   6   5   4   3   2   1   0
-        x15 x14 x13 x12 x11 x10 x9  x8
+         .   .   .   .   .  x10 x9  x8
 
 byte 2:
 
    bit   7   6   5   4   3   2   1   0
         x7  x6  x5  x4  x4  x2  x1  x0
 
-         x15..x0 = absolute x value (horizontal)
+         x10..x0 = absolute x value (horizontal)
 
 byte 3:
 
@@ -350,14 +350,14 @@ byte 3:
 byte 4:
 
    bit   7   6   5   4   3   2   1   0
-        y15 y14 y13 y12 y11 y10 y8  y8
+         .   .   .   .   .   .  y9  y8
 
 byte 5:
 
    bit   7   6   5   4   3   2   1   0
         y7  y6  y5  y4  y3  y2  y1  y0
 
-         y15..y0 = absolute y value (vertical)
+         y9..y0 = absolute y value (vertical)
 
 
 4.2.2 Two finger touch

Documentation/spi/spidev_test.c

@@ -58,7 +58,7 @@ static void transfer(int fd)
 	};
 
 	ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
-	if (ret == 1)
+	if (ret < 1)
 		pabort("can't send spi message");
 
 	for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 34
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

arch/arm/boot/compressed/head.S

@@ -685,8 +685,8 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv4_mmu_cache_flush
 
-		.word	0x56056930
-		.word	0xff0ffff0		@ PXA935
+		.word	0x56056900
+		.word	0xffffff00		@ PXA9xx
 		W(b)	__armv4_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv4_mmu_cache_flush
@@ -697,12 +697,6 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv5tej_mmu_cache_flush
 
-		.word	0x56056930
-		.word	0xff0ffff0		@ PXA935
-		W(b)	__armv4_mmu_cache_on
-		W(b)	__armv4_mmu_cache_off
-		W(b)	__armv4_mmu_cache_flush
-
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
 		W(b)	__armv4_mmu_cache_on

arch/arm/configs/am3517_evm_defconfig

@@ -422,15 +422,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=y
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_TI_HECC=y
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+CONFIG_CAN_DEBUG_DEVICES=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
 
 #
@@ -517,7 +531,75 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-# CONFIG_NETDEVICES is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 

arch/arm/configs/ams_delta_defconfig

@@ -47,6 +47,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
+CONFIG_TREE_PREEMPT_RCU=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
@@ -95,9 +96,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -836,7 +836,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
 
 #
 # Display device support
@@ -1284,7 +1285,7 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set

arch/arm/configs/devkit8000_defconfig

@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Thu Feb  4 15:42:56 2010
+# Linux kernel version: 2.6.34-rc2
+# Wed Mar 24 13:27:25 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -19,7 +20,9 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -60,11 +63,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
@@ -96,10 +94,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
 
 #
 # Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
@@ -170,7 +172,7 @@ CONFIG_INLINE_WRITE_UNLOCK=y
 CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
 # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
 # CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -181,6 +183,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
@@ -190,7 +193,6 @@ CONFIG_MMU=y
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -207,21 +209,26 @@ CONFIG_MMU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
 # CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
 
 #
 # TI OMAP Implementations
@@ -237,16 +244,20 @@ CONFIG_ARCH_OMAP3=y
 # OMAP Feature Selections
 #
 # CONFIG_OMAP_RESET_CLOCKS is not set
-# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_PM_NONE is not set
 CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CUS=y
 
 #
 # OMAP Board Type
@@ -295,6 +306,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
 CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
@@ -387,7 +399,14 @@ CONFIG_HAVE_AOUT=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -395,7 +414,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -666,6 +684,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
@@ -717,6 +736,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
+# CONFIG_TI_DAVINCI_EMAC is not set
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=4
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
@@ -863,6 +883,7 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -891,6 +912,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -904,15 +926,9 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -944,10 +960,12 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -984,10 +1002,12 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 CONFIG_TWL4030_POWER=y
@@ -998,22 +1018,25 @@ CONFIG_TWL4030_CODEC=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
 # CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_TWL4030=y
 # CONFIG_REGULATOR_LP3971 is not set
@@ -1072,7 +1095,6 @@ CONFIG_OMAP2_DSS_VENC=y
 CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_FB_OMAP2=y
 CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
 CONFIG_FB_OMAP2_NUM_FBS=3
 
 #
@@ -1080,7 +1102,9 @@ CONFIG_FB_OMAP2_NUM_FBS=3
 #
 CONFIG_PANEL_GENERIC=y
 # CONFIG_PANEL_SHARP_LS037V7DW01 is not set
-CONFIG_PANEL_INNOLUX_AT070TN83=y
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+# CONFIG_PANEL_TPO_TD043MTEA1 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1136,6 +1160,7 @@ CONFIG_SND_ARM=y
 CONFIG_SND_SPI=y
 CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
 # CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_OMAP_SOC=y
@@ -1147,42 +1172,44 @@ CONFIG_SND_SOC_TWL4030=y
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HIDRAW=y
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
 # CONFIG_HID_PID is not set
-CONFIG_USB_HIDDEV=y
+# CONFIG_USB_HIDDEV is not set
 
 #
 # Special HID drivers
 #
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
+# CONFIG_HID_3M_PCT is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
 # CONFIG_HID_DRAGONRISE is not set
-CONFIG_HID_EZKEY=y
+# CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
-CONFIG_HID_GYRATION=y
+# CONFIG_HID_GYRATION is not set
 # CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
+# CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
+# CONFIG_HID_SUNPLUS is not set
 # CONFIG_HID_GREENASIA is not set
 # CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
@@ -1193,7 +1220,7 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
+CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 
 #
@@ -1202,7 +1229,7 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 CONFIG_USB_MON=y
@@ -1230,15 +1257,15 @@ CONFIG_USB_MUSB_SOC=y
 #
 # OMAP 343x high speed USB support
 #
-CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_HOST is not set
 # CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
 CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
+CONFIG_USB_MUSB_DEBUG=y
 
 #
 # USB Device Class drivers
@@ -1291,7 +1318,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1304,9 +1330,8 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
@@ -1314,8 +1339,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
@@ -1330,19 +1354,20 @@ CONFIG_USB_OMAP=y
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_ETH_RNDIS=y
-CONFIG_USB_ETH_EEM=y
-CONFIG_USB_GADGETFS=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_MASS_STORAGE is not set
-CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
-CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1373,8 +1398,6 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=m
 # CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1392,11 +1415,11 @@ CONFIG_LEDS_GPIO_PLATFORM=y
 # CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
 # CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
@@ -1580,6 +1603,7 @@ CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_LZO=y
 CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1606,6 +1630,7 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set

arch/arm/configs/imote2_defconfig

@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc8
-# Sat Feb 13 21:48:53 2010
+# Linux kernel version: 2.6.34-rc2
+# Thu Apr  8 14:49:08 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -19,6 +20,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -60,11 +62,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -97,10 +94,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
 
 #
 # Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
@@ -184,6 +185,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
@@ -193,7 +195,6 @@ CONFIG_MMU=y
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -210,21 +211,26 @@ CONFIG_MMU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
 # CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -253,6 +259,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_EM_X270 is not set
 # CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_CAPC7117 is not set
 # CONFIG_ARCH_GUMSTIX is not set
 CONFIG_MACH_INTELMOTE2=y
 # CONFIG_MACH_STARGATE2 is not set
@@ -275,7 +282,11 @@ CONFIG_MACH_INTELMOTE2=y
 # CONFIG_PXA_EZX is not set
 # CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_RAUMFELD_RC is not set
+# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
+# CONFIG_MACH_RAUMFELD_SPEAKER is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_ICONTROL is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 CONFIG_PXA27x=y
 CONFIG_PXA_SSP=y
@@ -302,6 +313,7 @@ CONFIG_ARM_THUMB=y
 CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_CPU_HAS_PMU=y
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -352,7 +364,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
@@ -360,24 +372,8 @@ CONFIG_ATAGS_PROC=y
 #
 # CPU Power Management
 #
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -409,6 +405,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -416,7 +413,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -506,6 +502,7 @@ CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
@@ -622,6 +619,7 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -646,32 +644,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_BT_ATH3K is not set
+# CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
@@ -687,7 +660,8 @@ CONFIG_FIB_RULES=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -703,9 +677,9 @@ CONFIG_MTD=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_AR7_PARTS=y
 
 #
 # User Modules And Translation Layers
@@ -812,6 +786,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -965,6 +940,7 @@ CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -993,6 +969,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1006,15 +983,9 @@ CONFIG_I2C_PXA=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -1046,10 +1017,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -1093,10 +1066,12 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
@@ -1105,22 +1080,25 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_DUMMY is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
 # CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_DA903X=y
 # CONFIG_REGULATOR_LP3971 is not set
@@ -1218,6 +1196,7 @@ CONFIG_VIDEO_IR_I2C=y
 # CONFIG_VIDEO_SAA7191 is not set
 # CONFIG_VIDEO_TVP514X is not set
 # CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
 # CONFIG_VIDEO_VPX3220 is not set
 
 #
@@ -1264,15 +1243,7 @@ CONFIG_SOC_CAMERA_MT9M111=y
 CONFIG_VIDEO_PXA27x=y
 # CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
 #
@@ -1398,8 +1369,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1477,7 +1446,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1489,7 +1457,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1529,6 +1496,7 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1555,8 +1523,6 @@ CONFIG_SDIO_UART=m
 #
 CONFIG_MMC_PXA=y
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1574,11 +1540,11 @@ CONFIG_LEDS_LP3944=y
 # CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
 # CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
@@ -1656,7 +1622,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PXA=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
@@ -1681,19 +1647,10 @@ CONFIG_EXT3_FS_XATTR=y
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1716,9 +1673,7 @@ CONFIG_CUSE=m
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_ISO9660_FS is not set
 # CONFIG_UDF_FS is not set
 
 #
@@ -1750,12 +1705,14 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
@@ -1765,6 +1722,7 @@ CONFIG_JFFS2_RUBIN=y
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
 # CONFIG_SQUASHFS_EMBEDDED is not set
@@ -1802,6 +1760,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
 # CONFIG_CIFS_STATS2 is not set
@@ -1895,6 +1854,7 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
 CONFIG_LOCKDEP=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_LOCKDEP is not set
@@ -1918,6 +1878,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -2061,9 +2022,9 @@ CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
@@ -2075,3 +2036,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y

arch/arm/include/asm/elf.h

@@ -9,6 +9,8 @@
 #include <asm/ptrace.h>
 #include <asm/user.h>
 
+struct task_struct;
+
 typedef unsigned long elf_greg_t;
 typedef unsigned long elf_freg_t[3];
 

arch/arm/kernel/entry-armv.S

@@ -676,10 +676,10 @@ do_fpe:
  *  lr  = unrecognised FP instruction return address
  */
 
-	.data
+	.pushsection .data
 ENTRY(fp_enter)
 	.word	no_fp
-	.text
+	.popsection
 
 ENTRY(no_fp)
 	mov	pc, lr

arch/arm/kernel/smp.c

@@ -86,6 +86,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
 			return PTR_ERR(idle);
 		}
 		ci->idle = idle;
+	} else {
+		/*
+		 * Since this idle thread is being re-used, call
+		 * init_idle() to reinitialize the thread structure.
+		 */
+		init_idle(idle, cpu);
 	}
 
 	/*

arch/arm/mach-mx5/clock-mx51.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 
 #include <asm/clkdev.h>
+#include <asm/div64.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>

arch/arm/mach-omap2/Kconfig

@@ -10,6 +10,7 @@ config ARCH_OMAP2420
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
+	select ARCH_OMAP_OTG
 
 config ARCH_OMAP3430
 	bool "OMAP3430 support"

arch/arm/mach-omap2/board-2430sdp.c

@@ -174,9 +174,18 @@ static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = {
 	},
 };
 
+static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2D),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP_GPIO_IRQ(78),
+	},
+};
+
 static int __init omap2430_i2c_init(void)
 {
-	omap_register_i2c_bus(1, 400, NULL, 0);
+	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
+			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
 	omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo,
 			ARRAY_SIZE(sdp2430_i2c_boardinfo));
 	return 0;
@@ -198,6 +207,15 @@ static struct omap_musb_board_data musb_board_data = {
 	.mode			= MUSB_OTG,
 	.power			= 100,
 };
+static struct omap_usb_config sdp2430_usb_config __initdata = {
+	.otg		= 1,
+#ifdef  CONFIG_USB_GADGET_OMAP
+	.hmc_mode	= 0x0,
+#elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	.hmc_mode	= 0x1,
+#endif
+	.pins[0]	= 3,
+};
 
 static void __init omap_2430sdp_init(void)
 {
@@ -208,6 +226,7 @@ static void __init omap_2430sdp_init(void)
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	omap2_hsmmc_init(mmc);
+	omap_usb_init(&sdp2430_usb_config);
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
 

arch/arm/mach-omap2/board-am3517evm.c

@@ -21,6 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/can/platform/ti_hecc.h>
+#include <linux/davinci_emac.h>
 
 #include <mach/hardware.h>
 #include <mach/am35xx.h>
@@ -30,11 +32,106 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
+#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/display.h>
 
 #include "mux.h"
 
+#define AM35XX_EVM_PHY_MASK		(0xF)
+#define AM35XX_EVM_MDIO_FREQUENCY	(1000000)
+
+static struct emac_platform_data am3517_evm_emac_pdata = {
+	.phy_mask	= AM35XX_EVM_PHY_MASK,
+	.mdio_max_freq	= AM35XX_EVM_MDIO_FREQUENCY,
+	.rmii_en	= 1,
+};
+
+static struct resource am3517_emac_resources[] = {
+	{
+		.start  = AM35XX_IPSS_EMAC_BASE,
+		.end    = AM35XX_IPSS_EMAC_BASE + 0x3FFFF,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.end    = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.start  = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.end    = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_emac_device = {
+	.name		= "davinci_emac",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_emac_resources),
+	.resource	= am3517_emac_resources,
+};
+
+static void am3517_enable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
+		AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am3517_disable_ethernet_int(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+		AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
+{
+	unsigned int regval;
+
+	pdata->ctrl_reg_offset		= AM35XX_EMAC_CNTRL_OFFSET;
+	pdata->ctrl_mod_reg_offset	= AM35XX_EMAC_CNTRL_MOD_OFFSET;
+	pdata->ctrl_ram_offset		= AM35XX_EMAC_CNTRL_RAM_OFFSET;
+	pdata->mdio_reg_offset		= AM35XX_EMAC_MDIO_OFFSET;
+	pdata->ctrl_ram_size		= AM35XX_EMAC_CNTRL_RAM_SIZE;
+	pdata->version			= EMAC_VERSION_2;
+	pdata->hw_ram_addr		= AM35XX_EMAC_HW_RAM_ADDR;
+	pdata->interrupt_enable		= am3517_enable_ethernet_int;
+	pdata->interrupt_disable	= am3517_disable_ethernet_int;
+	am3517_emac_device.dev.platform_data	= pdata;
+	platform_device_register(&am3517_emac_device);
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+	regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+	return ;
+}
+
+
+
 #define LCD_PANEL_PWR		176
 #define LCD_PANEL_BKLIGHT_PWR	182
 #define LCD_PANEL_PWM		181
@@ -119,6 +216,8 @@ static int __init am3517_evm_i2c_init(void)
 static int lcd_enabled;
 static int dvi_enabled;
 
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
 static void __init am3517_evm_display_init(void)
 {
 	int r;
@@ -162,6 +261,9 @@ err_2:
 err_1:
 	gpio_free(LCD_PANEL_BKLIGHT_PWR);
 }
+#else
+static void __init am3517_evm_display_init(void) {}
+#endif
 
 static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
@@ -275,7 +377,12 @@ static void __init am3517_evm_init_irq(void)
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
+		defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+#else
 	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+#endif
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
 	.phy_reset  = true,
@@ -292,6 +399,42 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+
+static struct resource am3517_hecc_resources[] = {
+	{
+		.start	= AM35XX_IPSS_HECC_BASE,
+		.end	= AM35XX_IPSS_HECC_BASE + 0x3FFF,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_35XX_HECC0_IRQ,
+		.end	= INT_35XX_HECC0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device am3517_hecc_device = {
+	.name		= "ti_hecc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(am3517_hecc_resources),
+	.resource	= am3517_hecc_resources,
+};
+
+static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+	.scc_hecc_offset	= AM35XX_HECC_SCC_HECC_OFFSET,
+	.scc_ram_offset		= AM35XX_HECC_SCC_RAM_OFFSET,
+	.hecc_ram_offset	= AM35XX_HECC_RAM_OFFSET,
+	.mbx_offset		= AM35XX_HECC_MBOX_OFFSET,
+	.int_line		= AM35XX_HECC_INT_LINE,
+	.version		= AM35XX_HECC_VERSION,
+};
+
+static void am3517_evm_hecc_init(struct ti_hecc_platform_data *pdata)
+{
+	am3517_hecc_device.dev.platform_data = pdata;
+	platform_device_register(&am3517_hecc_device);
+}
+
 static void __init am3517_evm_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -305,6 +448,7 @@ static void __init am3517_evm_init(void)
 	/* Configure GPIO for EHCI port */
 	omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
 	usb_ehci_init(&ehci_pdata);
+	am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
 	/* DSS */
 	am3517_evm_display_init();
 
@@ -313,6 +457,8 @@ static void __init am3517_evm_init(void)
 
 	i2c_register_board_info(1, am3517evm_i2c_boardinfo,
 				ARRAY_SIZE(am3517evm_i2c_boardinfo));
+	/*Ethernet*/
+	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
 }
 
 static void __init am3517_evm_map_io(void)

arch/arm/mach-omap2/board-devkit8000.c

@@ -633,8 +633,163 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+static struct omap_board_mux board_mux[] __initdata = {
+	/* nCS and IRQ for Devkit8000 ethernet */
+	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE0),
+	OMAP3_MUX(ETK_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+	/* McSPI 2*/
+	OMAP3_MUX(MCSPI2_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI2_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCSPI2_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI2_CS0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCSPI2_CS1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* PENDOWN GPIO */
+	OMAP3_MUX(ETK_D13, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
+	/* mUSB */
+	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* USB 1 */
+	OMAP3_MUX(ETK_CTL, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(ETK_D8, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D9, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D0, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D2, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+	OMAP3_MUX(ETK_D7, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+
+	/* MMC 1 */
+	OMAP3_MUX(SDMMC1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(SDMMC1_DAT7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* McBSP 2 */
+	OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* I2C 1 */
+	OMAP3_MUX(I2C1_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C1_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* I2C 2 */
+	OMAP3_MUX(I2C2_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* I2C 3 */
+	OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* I2C 4 */
+	OMAP3_MUX(I2C4_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C4_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* serial ports */
+	OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* DSS */
+	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* expansion port */
+	/* McSPI 1 */
+	OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(MCSPI1_CS3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+
+	/* HDQ */
+	OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* McSPI4 */
+	OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
+
+	/* MMC 2 */
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+
+	/* I2C3 */
+	OMAP3_MUX(I2C3_SCL, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(I2C3_SDA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+	OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+
+	/* TPS IRQ */
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
+			OMAP_PIN_INPUT_PULLUP),
+
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
 static void __init devkit8000_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
 
 	omap_dm9000_init();

arch/arm/mach-omap2/board-overo.c

@@ -63,6 +63,8 @@
 
 #define OVERO_SMSC911X_CS      5
 #define OVERO_SMSC911X_GPIO    176
+#define OVERO_SMSC911X2_CS     4
+#define OVERO_SMSC911X2_GPIO   65
 
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
@@ -137,6 +139,16 @@ static struct resource overo_smsc911x_resources[] = {
 	},
 };
 
+static struct resource overo_smsc911x2_resources[] = {
+	{
+		.name	= "smsc911x2-memory",
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
 static struct smsc911x_platform_config overo_smsc911x_config = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
@@ -146,7 +158,7 @@ static struct smsc911x_platform_config overo_smsc911x_config = {
 
 static struct platform_device overo_smsc911x_device = {
 	.name		= "smsc911x",
-	.id		= -1,
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
 	.resource	= overo_smsc911x_resources,
 	.dev		= {

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -277,7 +277,7 @@ static struct regulator_consumer_supply rx51_vmmc1_supply = {
 	.dev_name = "mmci-omap-hs.0",
 };
 
-static struct regulator_consumer_supply rx51_vmmc2_supply = {
+static struct regulator_consumer_supply rx51_vaux3_supply = {
 	.supply   = "vmmc",
 	.dev_name = "mmci-omap-hs.1",
 };
@@ -287,6 +287,35 @@ static struct regulator_consumer_supply rx51_vsim_supply = {
 	.dev_name = "mmci-omap-hs.1",
 };
 
+static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
+	/* tlv320aic3x analog supplies */
+	{
+		.supply		= "AVDD",
+		.dev_name	= "2-0018",
+	},
+	{
+		.supply		= "DRVDD",
+		.dev_name	= "2-0018",
+	},
+	/* Keep vmmc as last item. It is not iterated for newer boards */
+	{
+		.supply		= "vmmc",
+		.dev_name	= "mmci-omap-hs.1",
+	},
+};
+
+static struct regulator_consumer_supply rx51_vio_supplies[] = {
+	/* tlv320aic3x digital supplies */
+	{
+		.supply		= "IOVDD",
+		.dev_name	= "2-0018"
+	},
+	{
+		.supply		= "DVDD",
+		.dev_name	= "2-0018"
+	},
+};
+
 static struct regulator_init_data rx51_vaux1 = {
 	.constraints = {
 		.name			= "V28",
@@ -338,7 +367,7 @@ static struct regulator_init_data rx51_vaux3_mmc = {
 					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.consumer_supplies	= &rx51_vaux3_supply,
 };
 
 static struct regulator_init_data rx51_vaux4 = {
@@ -370,9 +399,9 @@ static struct regulator_init_data rx51_vmmc1 = {
 
 static struct regulator_init_data rx51_vmmc2 = {
 	.constraints = {
-		.name			= "VMMC2_30",
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
+		.name			= "V28_A",
+		.min_uV			= 2800000,
+		.max_uV			= 3000000,
 		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
@@ -380,8 +409,8 @@ static struct regulator_init_data rx51_vmmc2 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &rx51_vmmc2_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vmmc2_supplies),
+	.consumer_supplies	= rx51_vmmc2_supplies,
 };
 
 static struct regulator_init_data rx51_vsim = {
@@ -411,6 +440,20 @@ static struct regulator_init_data rx51_vdac = {
 	},
 };
 
+static struct regulator_init_data rx51_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(rx51_vio_supplies),
+	.consumer_supplies	= rx51_vio_supplies,
+};
+
 static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 {
 	/* FIXME this gpio setup is just a placeholder for now */
@@ -618,6 +661,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vmmc1			= &rx51_vmmc1,
 	.vsim			= &rx51_vsim,
 	.vdac			= &rx51_vdac,
+	.vio			= &rx51_vio,
 };
 
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
@@ -629,18 +673,27 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 	},
 };
 
+static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	},
+};
+
 static int __init rx51_i2c_init(void)
 {
 	if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
-	    system_rev >= SYSTEM_REV_B_USES_VAUX3)
+	    system_rev >= SYSTEM_REV_B_USES_VAUX3) {
 		rx51_twldata.vaux3 = &rx51_vaux3_mmc;
-	else {
+		/* Only older boards use VMMC2 for internal MMC */
+		rx51_vmmc2.num_consumer_supplies--;
+	} else {
 		rx51_twldata.vaux3 = &rx51_vaux3_cam;
-		rx51_twldata.vmmc2 = &rx51_vmmc2;
 	}
+	rx51_twldata.vmmc2 = &rx51_vmmc2;
 	omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
-			ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
-	omap_register_i2c_bus(2, 100, NULL, 0);
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
+	omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
+			      ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
 	omap_register_i2c_bus(3, 400, NULL, 0);
 	return 0;
 }

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3472,8 +3472,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"ipss_ick",	&ipss_ick,	CK_AM35XX),
 	CLK(NULL,	"rmii_ck",	&rmii_ck,	CK_AM35XX),
 	CLK(NULL,	"pclk_ck",	&pclk_ck,	CK_AM35XX),
-	CLK("davinci_emac",	"ick",		&emac_ick,	CK_AM35XX),
-	CLK("davinci_emac",	"fck",		&emac_fck,	CK_AM35XX),
+	CLK("davinci_emac",	"emac_clk",	&emac_ick,	CK_AM35XX),
+	CLK("davinci_emac",	"phy_clk",	&emac_fck,	CK_AM35XX),
 	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
 	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
 	CLK("musb_hdrc",	"ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),

arch/arm/mach-omap2/devices.c

@@ -786,6 +786,33 @@ static inline void omap_hdq_init(void)
 static inline void omap_hdq_init(void) {}
 #endif
 
+/*---------------------------------------------------------------------------*/
+
+#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
+	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
+};
+#else
+static struct resource omap_vout_resource[2] = {
+};
+#endif
+
+static struct platform_device omap_vout_device = {
+	.name		= "omap_vout",
+	.num_resources	= ARRAY_SIZE(omap_vout_resource),
+	.resource 	= &omap_vout_resource[0],
+	.id		= -1,
+};
+static void omap_init_vout(void)
+{
+	if (platform_device_register(&omap_vout_device) < 0)
+		printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
+}
+#else
+static inline void omap_init_vout(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -800,6 +827,7 @@ static int __init omap2_init_devices(void)
 	omap_hdq_init();
 	omap_init_sti();
 	omap_init_sha1_md5();
+	omap_init_vout();
 
 	return 0;
 }

arch/arm/mach-omap2/include/mach/am35xx.h

@@ -23,4 +23,22 @@
 #define AM35XX_IPSS_HECC_BASE		0x5C050000
 #define AM35XX_IPSS_VPFE_BASE		0x5C060000
 
-#endif /*  __ASM_ARCH_AM35XX_H */
+
+/* HECC module specifc offset definitions */
+#define AM35XX_HECC_SCC_HECC_OFFSET	(0x0)
+#define AM35XX_HECC_SCC_RAM_OFFSET	(0x3000)
+#define AM35XX_HECC_RAM_OFFSET		(0x3000)
+#define AM35XX_HECC_MBOX_OFFSET		(0x2000)
+#define AM35XX_HECC_INT_LINE		(0x0)
+#define AM35XX_HECC_VERSION		(0x1)
+
+#define AM35XX_EMAC_CNTRL_OFFSET	(0x10000)
+#define AM35XX_EMAC_CNTRL_MOD_OFFSET	(0x0)
+#define AM35XX_EMAC_CNTRL_RAM_OFFSET	(0x20000)
+#define AM35XX_EMAC_MDIO_OFFSET		(0x30000)
+#define AM35XX_EMAC_CNTRL_RAM_SIZE	(0x2000)
+#define AM35XX_EMAC_RAM_ADDR		(AM3517_EMAC_BASE + \
+						AM3517_EMAC_CNTRL_RAM_OFFSET)
+#define AM35XX_EMAC_HW_RAM_ADDR		(0x01E20000)
+
+#endif  /*  __ASM_ARCH_AM35XX_H */

arch/arm/mach-pxa/include/mach/colibri.h

@@ -2,6 +2,7 @@
 #define _COLIBRI_H_
 
 #include <net/ax88796.h>
+#include <mach/mfp.h>
 
 /*
  * common settings for all modules

arch/arm/mach-pxa/include/mach/hardware.h

@@ -202,7 +202,7 @@
 #define __cpu_is_pxa950(id)                             \
 	({                                              \
 		unsigned int _id = (id) >> 4 & 0xfff;	\
-		id == 0x697;				\
+		_id == 0x697;				\
 	 })
 #else
 #define __cpu_is_pxa950(id)	(0)

arch/arm/mach-pxa/include/mach/regs-u2d.h

@@ -166,7 +166,8 @@
 #define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
 #define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
 #define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
-#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
+#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
 #define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
 #define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
 #define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */

arch/arm/mach-pxa/raumfeld.c

@@ -983,7 +983,7 @@ static void __init raumfeld_common_init(void)
 		int i;
 
 		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
-			if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+			if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
 				gpio_keys_button[i].active_low = 1;
 	}
 
@@ -1009,8 +1009,7 @@ static void __init raumfeld_common_init(void)
 		gpio_direction_output(GPIO_W2W_PDN, 0);
 
 	/* this can be used to switch off the device */
-	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
-				"supply shutdown");
+	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
 	if (ret < 0)
 		pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
 	else

arch/arm/mach-pxa/spitz.c

@@ -363,7 +363,7 @@ static struct gpio_keys_button spitz_gpio_keys[] = {
 		.type	= EV_PWR,
 		.code	= KEY_SUSPEND,
 		.gpio	= SPITZ_GPIO_ON_KEY,
-		.desc	= "On/Off",
+		.desc	= "On Off",
 		.wakeup	= 1,
 	},
 	/* Two buttons detecting the lid state */

arch/arm/mach-pxa/viper.c

@@ -34,6 +34,7 @@
 #include <linux/pm.h>
 #include <linux/sched.h>
 #include <linux/gpio.h>
+#include <linux/jiffies.h>
 #include <linux/i2c-gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
@@ -454,7 +455,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = {
 	.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
 	.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
 	.udelay  = 10,
-	.timeout = 100,
+	.timeout = HZ,
 };
 
 static struct platform_device i2c_bus_device = {
@@ -779,7 +780,7 @@ static void __init viper_tpm_init(void)
 		.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
 		.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
 		.udelay  = 10,
-		.timeout = 100,
+		.timeout = HZ,
 	};
 	char *errstr;
 

arch/arm/mach-sa1100/Kconfig

@@ -57,7 +57,7 @@ config SA1100_COLLIE
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
 	select HTC_EGPIO
-	select CPU_FREQ_SA1100
+	select CPU_FREQ_SA1110
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
@@ -68,7 +68,7 @@ config SA1100_H3100
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
 	select HTC_EGPIO
-	select CPU_FREQ_SA1100
+	select CPU_FREQ_SA1110
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the

arch/arm/mach-sa1100/cpu-sa1110.c

@@ -363,6 +363,9 @@ static int __init sa1110_clk_init(void)
 	struct sdram_params *sdram;
 	const char *name = sdram_name;
 
+	if (!cpu_is_sa1110())
+		return -ENODEV;
+
 	if (!name[0]) {
 		if (machine_is_assabet())
 			name = "TC59SM716-CL3";

arch/arm/mm/init.c

@@ -86,9 +86,6 @@ void show_mem(void)
 	printk("Mem-info:\n");
 	show_free_areas();
 	for_each_online_node(node) {
-		pg_data_t *n = NODE_DATA(node);
-		struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
 		for_each_nodebank (i,mi,node) {
 			struct membank *bank = &mi->bank[i];
 			unsigned int pfn1, pfn2;
@@ -97,8 +94,8 @@ void show_mem(void)
 			pfn1 = bank_pfn_start(bank);
 			pfn2 = bank_pfn_end(bank);
 
-			page = map + pfn1;
-			end  = map + pfn2;
+			page = pfn_to_page(pfn1);
+			end  = pfn_to_page(pfn2 - 1) + 1;
 
 			do {
 				total++;
@@ -603,9 +600,6 @@ void __init mem_init(void)
 	reserved_pages = free_pages = 0;
 
 	for_each_online_node(node) {
-		pg_data_t *n = NODE_DATA(node);
-		struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
 		for_each_nodebank(i, &meminfo, node) {
 			struct membank *bank = &meminfo.bank[i];
 			unsigned int pfn1, pfn2;
@@ -614,8 +608,8 @@ void __init mem_init(void)
 			pfn1 = bank_pfn_start(bank);
 			pfn2 = bank_pfn_end(bank);
 
-			page = map + pfn1;
-			end  = map + pfn2;
+			page = pfn_to_page(pfn1);
+			end  = pfn_to_page(pfn2 - 1) + 1;
 
 			do {
 				if (PageReserved(page))

arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h

@@ -31,7 +31,13 @@
 #define DMA_MODE_WRITE		1
 #define DMA_MODE_MASK		1
 
-#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
+#define MX1_DMA_REG(offset)	MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
+
+/* DMA Interrupt Mask Register */
+#define MX1_DMA_DIMR		MX1_DMA_REG(0x08)
+
+/* Channel Control Register */
+#define MX1_DMA_CCR(x)		MX1_DMA_REG(0x8c + ((x) << 6))
 
 #define IMX_DMA_MEMSIZE_32	(0 << 4)
 #define IMX_DMA_MEMSIZE_8	(1 << 4)

arch/arm/plat-omap/include/plat/usb.h

@@ -46,7 +46,7 @@ struct ehci_hcd_omap_platform_data {
 struct omap_musb_board_data {
 	u8	interface_type;
 	u8	mode;
-	u8	power;
+	u16	power;
 };
 
 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};

arch/arm/plat-pxa/dma.c

@@ -245,7 +245,7 @@ static void pxa_dma_init_debugfs(void)
 
 	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
 			     GFP_KERNEL);
-	if (!dbgfs_state)
+	if (!dbgfs_chan)
 		goto err_alloc;
 
 	chandir = debugfs_create_dir("channels", dbgfs_root);

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Mar 20 15:35:41 2010
+# Last update: Sat May 1 10:36:42 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2749,3 +2749,58 @@ stamp9g45		MACH_STAMP9G45		STAMP9G45		2761
 h6053			MACH_H6053		H6053			2762
 smint01			MACH_SMINT01		SMINT01			2763
 prtlvt2			MACH_PRTLVT2		PRTLVT2			2764
+ap420			MACH_AP420		AP420			2765
+htcshift		MACH_HTCSHIFT		HTCSHIFT		2766
+davinci_dm365_fc	MACH_DAVINCI_DM365_FC	DAVINCI_DM365_FC	2767
+msm8x55_surf		MACH_MSM8X55_SURF	MSM8X55_SURF		2768
+msm8x55_ffa		MACH_MSM8X55_FFA	MSM8X55_FFA		2769
+esl_vamana		MACH_ESL_VAMANA		ESL_VAMANA		2770
+sbc35			MACH_SBC35		SBC35			2771
+mpx6446			MACH_MPX6446		MPX6446			2772
+oreo_controller		MACH_OREO_CONTROLLER	OREO_CONTROLLER		2773
+kopin_models		MACH_KOPIN_MODELS	KOPIN_MODELS		2774
+ttc_vision2		MACH_TTC_VISION2	TTC_VISION2		2775
+cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
+lpc2			MACH_LPC2		LPC2			2777
+olympus			MACH_OLYMPUS		OLYMPUS			2778
+vortex			MACH_VORTEX		VORTEX			2779
+s5pc200			MACH_S5PC200		S5PC200			2780
+ecucore_9263		MACH_ECUCORE_9263	ECUCORE_9263		2781
+smdkc200		MACH_SMDKC200		SMDKC200		2782
+emsiso_sx27		MACH_EMSISO_SX27	EMSISO_SX27		2783
+apx_som9g45_ek		MACH_APX_SOM9G45_EK	APX_SOM9G45_EK		2784
+songshan		MACH_SONGSHAN		SONGSHAN		2785
+tianshan		MACH_TIANSHAN		TIANSHAN		2786
+vpx500			MACH_VPX500		VPX500			2787
+am3517sam		MACH_AM3517SAM		AM3517SAM		2788
+skat91_sim508		MACH_SKAT91_SIM508	SKAT91_SIM508		2789
+skat91_s3e		MACH_SKAT91_S3E		SKAT91_S3E		2790
+omap4_panda		MACH_OMAP4_PANDA	OMAP4_PANDA		2791
+df7220			MACH_DF7220		DF7220			2792
+nemini			MACH_NEMINI		NEMINI			2793
+t8200			MACH_T8200		T8200			2794
+apf51			MACH_APF51		APF51			2795
+dr_rc_unit		MACH_DR_RC_UNIT		DR_RC_UNIT		2796
+bordeaux		MACH_BORDEAUX		BORDEAUX		2797
+catania_b		MACH_CATANIA_B		CATANIA_B		2798
+mx51_ocean		MACH_MX51_OCEAN		MX51_OCEAN		2799
+ti8168evm		MACH_TI8168EVM		TI8168EVM		2800
+neocoreomap		MACH_NEOCOREOMAP	NEOCOREOMAP		2801
+withings_wbp		MACH_WITHINGS_WBP	WITHINGS_WBP		2802
+dbps			MACH_DBPS		DBPS			2803
+sbc9261			MACH_SBC9261		SBC9261			2804
+pcbfp0001		MACH_PCBFP0001		PCBFP0001		2805
+speedy			MACH_SPEEDY		SPEEDY			2806
+chrysaor		MACH_CHRYSAOR		CHRYSAOR		2807
+tango			MACH_TANGO		TANGO			2808
+synology_dsx11		MACH_SYNOLOGY_DSX11	SYNOLOGY_DSX11		2809
+hanlin_v3ext		MACH_HANLIN_V3EXT	HANLIN_V3EXT		2810
+hanlin_v5		MACH_HANLIN_V5		HANLIN_V5		2811
+hanlin_v3plus		MACH_HANLIN_V3PLUS	HANLIN_V3PLUS		2812
+iriver_story		MACH_IRIVER_STORY	IRIVER_STORY		2813
+irex_iliad		MACH_IREX_ILIAD		IREX_ILIAD		2814
+irex_dr1000		MACH_IREX_DR1000	IREX_DR1000		2815
+teton_bga		MACH_TETON_BGA		TETON_BGA		2816
+snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
+tam3517			MACH_TAM3517		TAM3517			2818
+pdc100			MACH_PDC100		PDC100			2819

arch/microblaze/configs/mmu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb  3 10:02:59 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May  6 11:22:14 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
 CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -56,7 +54,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -106,6 +103,8 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -245,13 +244,20 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -341,7 +347,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -370,6 +378,7 @@ CONFIG_MISC_DEVICES=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -383,9 +392,30 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -394,6 +424,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851_MLL is not set
 CONFIG_XILINX_EMACLITE=y
@@ -444,6 +475,7 @@ CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -471,6 +503,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -502,6 +540,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -572,6 +611,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -595,6 +635,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=y
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
@@ -696,6 +737,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -741,6 +783,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_HEART_BEAT is not set
@@ -862,5 +905,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y

arch/microblaze/configs/nommu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb  3 10:03:21 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May  6 11:25:12 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
 CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -58,7 +56,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -96,6 +93,8 @@ CONFIG_SLAB=y
 # CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -209,11 +208,14 @@ CONFIG_PROC_DEVICETREE=y
 #
 # Advanced setup
 #
+# CONFIG_ADVANCED_OPTIONS is not set
 
 #
 # Default settings for advanced configuration options are used
 #
+CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_KERNEL_START=0x90000000
+CONFIG_TASK_SIZE=0x80000000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -235,13 +237,20 @@ CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -413,6 +422,7 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -442,6 +452,7 @@ CONFIG_MISC_DEVICES=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -458,6 +469,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -466,6 +478,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851_MLL is not set
 # CONFIG_XILINX_EMACLITE is not set
@@ -516,6 +529,7 @@ CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -544,6 +558,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -593,6 +613,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -661,6 +682,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -689,6 +711,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -733,6 +756,7 @@ CONFIG_DEBUG_OBJECTS_TIMERS=y
 # CONFIG_DEBUG_OBJECTS_WORK is not set
 CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -758,6 +782,7 @@ CONFIG_DEBUG_SG=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -782,6 +807,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_HEART_BEAT is not set
@@ -901,5 +927,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y

arch/microblaze/include/asm/cache.h

@@ -15,7 +15,7 @@
 
 #include <asm/registers.h>
 
-#define L1_CACHE_SHIFT	2
+#define L1_CACHE_SHIFT 5
 /* word-granular cache in microblaze */
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 

arch/microblaze/include/asm/dma.h

@@ -18,4 +18,10 @@
 #define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
 #endif
 
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy     (0)
+#endif
+
 #endif /* _ASM_MICROBLAZE_DMA_H */

arch/microblaze/include/asm/exceptions.h

@@ -64,12 +64,6 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data);
-int bad_trap(int trap_num, struct pt_regs *regs);
-int debug_trap(struct pt_regs *regs);
-#endif /* CONFIG_MMU */
-
 #if defined(CONFIG_KGDB)
 void (*debugger)(struct pt_regs *regs);
 int (*debugger_bpt)(struct pt_regs *regs);

arch/microblaze/include/asm/io.h

@@ -139,8 +139,6 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 
 #ifdef CONFIG_MMU
 
-#define mm_ptov(addr)		((void *)__phys_to_virt(addr))
-#define mm_vtop(addr)		((unsigned long)__virt_to_phys(addr))
 #define phys_to_virt(addr)	((void *)__phys_to_virt(addr))
 #define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
 #define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))

arch/microblaze/include/asm/page.h

@@ -31,6 +31,9 @@
 
 #ifndef __ASSEMBLY__
 
+/* MS be sure that SLAB allocates aligned objects */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
 #define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
 
@@ -70,14 +73,7 @@ typedef unsigned long pte_basic_t;
 
 #endif /* CONFIG_MMU */
 
-#  ifndef CONFIG_MMU
-#  define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
-#  define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
-#  define free_user_page(page, addr)		free_page(addr)
-#  else /* CONFIG_MMU */
-extern void copy_page(void *to, void *from);
-#  endif /* CONFIG_MMU */
-
+# define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
 # define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
 
 # define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)

arch/microblaze/include/asm/pci.h

@@ -94,14 +94,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
 
 #define HAVE_PCI_LEGACY	1
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 /* The PCI address space does equal the physical memory
  * address space (no IOMMU).  The IDE and SCSI device layers use
  * this boolean for bounce buffer decisions.

arch/microblaze/include/asm/pgalloc.h

@@ -108,21 +108,7 @@ extern inline void free_pgd_slow(pgd_t *pgd)
 #define pmd_alloc_one_fast(mm, address)	({ BUG(); ((pmd_t *)1); })
 #define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
 
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-		unsigned long address)
-{
-	pte_t *pte;
-	extern void *early_get_page(void);
-	if (mem_init_done) {
-		pte = (pte_t *)__get_free_page(GFP_KERNEL |
-					__GFP_REPEAT | __GFP_ZERO);
-	} else {
-		pte = (pte_t *)early_get_page();
-		if (pte)
-			clear_page(pte);
-	}
-	return pte;
-}
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
 
 static inline struct page *pte_alloc_one(struct mm_struct *mm,
 		unsigned long address)

arch/microblaze/include/asm/pgtable.h

@@ -511,15 +511,6 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-/*
- * When flushing the tlb entry for a page, we also need to flush the hash
- * table entry.  flush_hash_page is assembler (for speed) in hashtable.S.
- */
-extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
-/* Add an HPTE to the hash table */
-extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
 /*
  * Encode and decode a swap entry.
  * Note that the bits we use in a PTE for representing a swap entry
@@ -533,15 +524,7 @@ extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) >> 2 })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val << 2 })
 
-
-/* CONFIG_APUS */
-/* For virtual address to physical address conversion */
-extern void cache_clear(__u32 addr, int length);
-extern void cache_push(__u32 addr, int length);
-extern int mm_end_of_chunk(unsigned long addr, int len);
 extern unsigned long iopa(unsigned long addr);
-/* extern unsigned long mm_ptov(unsigned long addr) \
-	__attribute__ ((const)); TBD */
 
 /* Values for nocacheflag and cmode */
 /* These are not used by the APUS kernel_map, but prevents
@@ -552,18 +535,6 @@ extern unsigned long iopa(unsigned long addr);
 #define	IOMAP_NOCACHE_NONSER	2
 #define	IOMAP_NO_COPYBACK	3
 
-/*
- * Map some physical address range into the kernel address space.
- */
-extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
-				int nocacheflag, unsigned long *memavailp);
-
-/*
- * Set cache mode of (kernel space) address range.
- */
-extern void kernel_set_cachemode(unsigned long address, unsigned long size,
-				unsigned int cmode);
-
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 #define kern_addr_valid(addr)	(1)
 
@@ -577,10 +548,6 @@ extern void kernel_set_cachemode(unsigned long address, unsigned long size,
 void do_page_fault(struct pt_regs *regs, unsigned long address,
 		   unsigned long error_code);
 
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
-			     unsigned int size, int flags);
-
-void __init adjust_total_lowmem(void);
 void mapin_ram(void);
 int map_page(unsigned long va, phys_addr_t pa, int flags);
 
@@ -601,7 +568,7 @@ void __init *early_get_page(void);
 extern unsigned long ioremap_bot, ioremap_base;
 
 void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
-void consistent_free(void *vaddr);
+void consistent_free(size_t size, void *vaddr);
 void consistent_sync(void *vaddr, size_t size, int direction);
 void consistent_sync_page(struct page *page, unsigned long offset,
 	size_t size, int direction);

arch/microblaze/kernel/asm-offsets.c

@@ -16,6 +16,7 @@
 #include <linux/hardirq.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
+#include <asm/cpuinfo.h>
 
 int main(int argc, char *argv[])
 {

arch/microblaze/kernel/cpu/cache.c

@@ -96,13 +96,16 @@ static inline void __disable_dcache_nomsr(void)
 }
 
 
-/* Helper macro for computing the limits of cache range loops */
+/* Helper macro for computing the limits of cache range loops
+ *
+ * End address can be unaligned which is OK for C implementation.
+ * ASM implementation align it in ASM macros
+ */
 #define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size)	\
 do {									\
 	int align = ~(cache_line_length - 1);				\
 	end = min(start + cache_size, end);				\
 	start &= align;							\
-	end = ((end & align) + cache_line_length);			\
 } while (0);
 
 /*
@@ -111,9 +114,9 @@ do {									\
  */
 #define CACHE_ALL_LOOP(cache_size, line_length, op)			\
 do {									\
-	unsigned int len = cache_size;					\
+	unsigned int len = cache_size - line_length;			\
 	int step = -line_length;					\
-	BUG_ON(step >= 0);						\
+	WARN_ON(step >= 0);						\
 									\
 	__asm__ __volatile__ (" 1:      " #op " %0, r0;			\
 					bgtid   %0, 1b;			\
@@ -122,26 +125,21 @@ do {									\
 					: "memory");			\
 } while (0);
 
-
-#define CACHE_ALL_LOOP2(cache_size, line_length, op)			\
-do {									\
-	unsigned int len = cache_size;					\
-	int step = -line_length;					\
-	BUG_ON(step >= 0);						\
-									\
-	__asm__ __volatile__ (" 1:	" #op "	r0, %0;			\
-					bgtid	%0, 1b;			\
-					addk	%0, %0, %1;		\
-					" : : "r" (len), "r" (step)	\
-					: "memory");			\
-} while (0);
-
-/* for wdc.flush/clear */
+/* Used for wdc.flush/clear which can use rB for offset which is not possible
+ * to use for simple wdc or wic.
+ *
+ * start address is cache aligned
+ * end address is not aligned, if end is aligned then I have to substract
+ * cacheline length because I can't flush/invalidate the next cacheline.
+ * If is not, I align it because I will flush/invalidate whole line.
+ */
 #define CACHE_RANGE_LOOP_2(start, end, line_length, op)			\
 do {									\
 	int step = -line_length;					\
+	int align = ~(line_length - 1);					\
+	end = ((end & align) == end) ? end - line_length : end & align;	\
 	int count = end - start;					\
-	BUG_ON(count <= 0);						\
+	WARN_ON(count < 0);						\
 									\
 	__asm__ __volatile__ (" 1:	" #op "	%0, %1;			\
 					bgtid	%1, 1b;			\
@@ -154,7 +152,9 @@ do {									\
 #define CACHE_RANGE_LOOP_1(start, end, line_length, op)			\
 do {									\
 	int volatile temp;						\
-	BUG_ON(end - start <= 0);					\
+	int align = ~(line_length - 1);					\
+	end = ((end & align) == end) ? end - line_length : end & align;	\
+	WARN_ON(end - start < 0);					\
 									\
 	__asm__ __volatile__ (" 1:	" #op "	%1, r0;			\
 					cmpu	%0, %1, %2;		\
@@ -360,8 +360,12 @@ static void __invalidate_dcache_all_noirq_wt(void)
 #endif
 }
 
-/* FIXME this is weird - should be only wdc but not work
- * MS: I am getting bus errors and other weird things */
+/* FIXME It is blindly invalidation as is expected
+ * but can't be called on noMMU in microblaze_cache_init below
+ *
+ * MS: noMMU kernel won't boot if simple wdc is used
+ * The reason should be that there are discared data which kernel needs
+ */
 static void __invalidate_dcache_all_wb(void)
 {
 #ifndef ASM_LOOP
@@ -369,12 +373,12 @@ static void __invalidate_dcache_all_wb(void)
 #endif
 	pr_debug("%s\n", __func__);
 #ifdef ASM_LOOP
-	CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
-					wdc.clear)
+	CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+					wdc)
 #else
 	for (i = 0; i < cpuinfo.dcache_size;
 		 i += cpuinfo.dcache_line_length)
-			__asm__ __volatile__ ("wdc.clear	%0, r0;" \
+			__asm__ __volatile__ ("wdc	%0, r0;" \
 					: : "r" (i));
 #endif
 }
@@ -393,7 +397,7 @@ static void __invalidate_dcache_range_wb(unsigned long start,
 #ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
 #else
-	for (i = start; i < end; i += cpuinfo.icache_line_length)
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
 		__asm__ __volatile__ ("wdc.clear	%0, r0;"	\
 				: : "r" (i));
 #endif
@@ -413,7 +417,7 @@ static void __invalidate_dcache_range_nomsr_wt(unsigned long start,
 #ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
 #else
-	for (i = start; i < end; i += cpuinfo.icache_line_length)
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
 		__asm__ __volatile__ ("wdc	%0, r0;"	\
 				: : "r" (i));
 #endif
@@ -437,7 +441,7 @@ static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
 #ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
 #else
-	for (i = start; i < end; i += cpuinfo.icache_line_length)
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
 		__asm__ __volatile__ ("wdc	%0, r0;"	\
 				: : "r" (i));
 #endif
@@ -465,7 +469,7 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
 #ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
 #else
-	for (i = start; i < end; i += cpuinfo.icache_line_length)
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
 		__asm__ __volatile__ ("wdc	%0, r0;"	\
 				: : "r" (i));
 #endif
@@ -504,7 +508,7 @@ static void __flush_dcache_range_wb(unsigned long start, unsigned long end)
 #ifdef ASM_LOOP
 	CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
 #else
-	for (i = start; i < end; i += cpuinfo.icache_line_length)
+	for (i = start; i < end; i += cpuinfo.dcache_line_length)
 		__asm__ __volatile__ ("wdc.flush	%0, r0;"	\
 				: : "r" (i));
 #endif
@@ -650,7 +654,11 @@ void microblaze_cache_init(void)
 			}
 		}
 	}
-	invalidate_dcache();
+/* FIXME Invalidation is done in U-BOOT
+ * WT cache: Data is already written to main memory
+ * WB cache: Discard data on noMMU which caused that kernel doesn't boot
+ */
+	/* invalidate_dcache(); */
 	enable_dcache();
 
 	invalidate_icache();

arch/microblaze/kernel/cpu/mb.c

@@ -98,15 +98,17 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	if (cpuinfo.use_icache)
 		count += seq_printf(m,
-				"Icache:\t\t%ukB\n",
-				cpuinfo.icache_size >> 10);
+				"Icache:\t\t%ukB\tline length:\t%dB\n",
+				cpuinfo.icache_size >> 10,
+				cpuinfo.icache_line_length);
 	else
 		count += seq_printf(m, "Icache:\t\tno\n");
 
 	if (cpuinfo.use_dcache) {
 		count += seq_printf(m,
-				"Dcache:\t\t%ukB\n",
-				cpuinfo.dcache_size >> 10);
+				"Dcache:\t\t%ukB\tline length:\t%dB\n",
+				cpuinfo.dcache_size >> 10,
+				cpuinfo.dcache_line_length);
 		if (cpuinfo.dcache_wb)
 			count += seq_printf(m, "\t\twrite-back\n");
 		else

arch/microblaze/kernel/dma.c

@@ -74,7 +74,7 @@ static void dma_direct_free_coherent(struct device *dev, size_t size,
 			      void *vaddr, dma_addr_t dma_handle)
 {
 #ifdef NOT_COHERENT_CACHE
-	consistent_free(vaddr);
+	consistent_free(size, vaddr);
 #else
 	free_pages((unsigned long)vaddr, get_order(size));
 #endif

arch/microblaze/kernel/exceptions.c

@@ -121,7 +121,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 		}
 		printk(KERN_WARNING "Divide by zero exception " \
 							"in kernel mode.\n");
-		die("Divide by exception", regs, SIGBUS);
+		die("Divide by zero exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_FPU_EXCEPTION:
 		pr_debug(KERN_WARNING "FPU exception\n");

arch/microblaze/kernel/head.S

@@ -28,6 +28,7 @@
  * for more details.
  */
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
@@ -49,7 +50,7 @@ swapper_pg_dir:
 
 #endif /* CONFIG_MMU */
 
-	.text
+	__HEAD
 ENTRY(_start)
 #if CONFIG_KERNEL_BASE_ADDR == 0
 	brai	TOPHYS(real_start)

arch/microblaze/kernel/irq.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/hardirq.h>
 #include <linux/interrupt.h>
@@ -32,7 +33,7 @@ EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
 
 static u32 concurrent_irq;
 
-void do_IRQ(struct pt_regs *regs)
+void __irq_entry do_IRQ(struct pt_regs *regs)
 {
 	unsigned int irq;
 	struct pt_regs *old_regs = set_irq_regs(regs);

arch/microblaze/kernel/misc.S

@@ -93,39 +93,3 @@ early_console_reg_tlb_alloc:
 	nop
 
 	.size  early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc
-
-/*
- * Copy a whole page (4096 bytes).
- */
-#define COPY_16_BYTES		\
-	lwi	r7, r6, 0;	\
-	lwi	r8, r6, 4;	\
-	lwi	r9, r6, 8;	\
-	lwi	r10, r6, 12;	\
-	swi	r7, r5, 0;	\
-	swi	r8, r5, 4;	\
-	swi	r9, r5, 8;	\
-	swi	r10, r5, 12
-
-
-/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/
-#define DCACHE_LINE_BYTES (4 * 4)
-
-.globl copy_page;
-.type  copy_page, @function
-.align 4;
-copy_page:
-	ori	r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1
-_copy_page_loop:
-	COPY_16_BYTES
-#if DCACHE_LINE_BYTES >= 32
-	COPY_16_BYTES
-#endif
-	addik	r6, r6, DCACHE_LINE_BYTES
-	addik	r5, r5, DCACHE_LINE_BYTES
-	bneid	r11, _copy_page_loop
-	addik	r11, r11, -1
-	rtsd	r15, 8
-	nop
-
-	.size  copy_page, . - copy_page

arch/microblaze/kernel/traps.c

@@ -95,37 +95,3 @@ void dump_stack(void)
 	show_stack(NULL, NULL);
 }
 EXPORT_SYMBOL(dump_stack);
-
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data)
-{
-	if (data)
-		printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n",
-			file, line, data);
-	else
-		printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line);
-
-	machine_halt();
-}
-
-int bad_trap(int trap_num, struct pt_regs *regs)
-{
-	printk(KERN_CRIT
-		"unimplemented trap %d called at 0x%08lx, pid %d!\n",
-		trap_num, regs->pc, current->pid);
-	return -ENOSYS;
-}
-
-int debug_trap(struct pt_regs *regs)
-{
-	int i;
-	printk(KERN_CRIT "debug trap\n");
-	for (i = 0; i < 32; i++) {
-		/* printk("r%i:%08X\t",i,regs->gpr[i]); */
-		if ((i % 4) == 3)
-			printk(KERN_CRIT "\n");
-	}
-	printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr);
-	return -ENOSYS;
-}
-#endif

arch/microblaze/kernel/vmlinux.lds.S

@@ -24,7 +24,8 @@ SECTIONS {
 	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		_text = . ;
 		_stext = . ;
-		*(.text .text.*)
+		HEAD_TEXT
+		TEXT_TEXT
 		*(.fixup)
 		EXIT_TEXT
 		EXIT_CALL

arch/microblaze/mm/consistent.c

@@ -42,11 +42,12 @@
 #include <linux/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/cpuinfo.h>
+#include <asm/tlbflush.h>
 
 #ifndef CONFIG_MMU
-
 /* I have to use dcache values because I can't relate on ram size */
-#define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+# define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+#endif
 
 /*
  * Consistent memory allocators. Used for DMA devices that want to
@@ -60,71 +61,16 @@
  */
 void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
 {
-	struct page *page, *end, *free;
-	unsigned long order;
-	void *ret, *virt;
-
-	if (in_interrupt())
-		BUG();
-
-	size = PAGE_ALIGN(size);
-	order = get_order(size);
-
-	page = alloc_pages(gfp, order);
-	if (!page)
-		goto no_page;
-
-	/* We could do with a page_to_phys and page_to_bus here. */
-	virt = page_address(page);
-	ret = ioremap(virt_to_phys(virt), size);
-	if (!ret)
-		goto no_remap;
-
-	/*
-	 * Here's the magic!  Note if the uncached shadow is not implemented,
-	 * it's up to the calling code to also test that condition and make
-	 * other arranegments, such as manually flushing the cache and so on.
-	 */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
-	ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
-#endif
-	/* dma_handle is same as physical (shadowed) address */
-	*dma_handle = (dma_addr_t)ret;
-
-	/*
-	 * free wasted pages.  We skip the first page since we know
-	 * that it will have count = 1 and won't require freeing.
-	 * We also mark the pages in use as reserved so that
-	 * remap_page_range works.
-	 */
-	page = virt_to_page(virt);
-	free = page + (size >> PAGE_SHIFT);
-	end  = page + (1 << order);
-
-	for (; page < end; page++) {
-		init_page_count(page);
-		if (page >= free)
-			__free_page(page);
-		else
-			SetPageReserved(page);
-	}
-
-	return ret;
-no_remap:
-	__free_pages(page, order);
-no_page:
-	return NULL;
-}
-
-#else
+	unsigned long order, vaddr;
+	void *ret;
+	unsigned int i, err = 0;
+	struct page *page, *end;
 
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
-{
-	int order, err, i;
-	unsigned long page, va, flags;
+#ifdef CONFIG_MMU
 	phys_addr_t pa;
 	struct vm_struct *area;
-	void	 *ret;
+	unsigned long va;
+#endif
 
 	if (in_interrupt())
 		BUG();
@@ -133,71 +79,133 @@ void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
 	size = PAGE_ALIGN(size);
 	order = get_order(size);
 
-	page = __get_free_pages(gfp, order);
-	if (!page) {
-		BUG();
+	vaddr = __get_free_pages(gfp, order);
+	if (!vaddr)
 		return NULL;
-	}
 
 	/*
 	 * we need to ensure that there are no cachelines in use,
 	 * or worse dirty in this area.
 	 */
-	flush_dcache_range(virt_to_phys(page), virt_to_phys(page) + size);
+	flush_dcache_range(virt_to_phys((void *)vaddr),
+					virt_to_phys((void *)vaddr) + size);
 
+#ifndef CONFIG_MMU
+	ret = (void *)vaddr;
+	/*
+	 * Here's the magic!  Note if the uncached shadow is not implemented,
+	 * it's up to the calling code to also test that condition and make
+	 * other arranegments, such as manually flushing the cache and so on.
+	 */
+# ifdef CONFIG_XILINX_UNCACHED_SHADOW
+	ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
+# endif
+	if ((unsigned int)ret > cpuinfo.dcache_base &&
+				(unsigned int)ret < cpuinfo.dcache_high)
+		printk(KERN_WARNING
+			"ERROR: Your cache coherent area is CACHED!!!\n");
+
+	/* dma_handle is same as physical (shadowed) address */
+	*dma_handle = (dma_addr_t)ret;
+#else
 	/* Allocate some common virtual space to map the new pages. */
 	area = get_vm_area(size, VM_ALLOC);
-	if (area == NULL) {
-		free_pages(page, order);
+	if (!area) {
+		free_pages(vaddr, order);
 		return NULL;
 	}
 	va = (unsigned long) area->addr;
 	ret = (void *)va;
 
 	/* This gives us the real physical address of the first page. */
-	*dma_handle = pa = virt_to_bus((void *)page);
-
-	/* MS: This is the whole magic - use cache inhibit pages */
-	flags = _PAGE_KERNEL | _PAGE_NO_CACHE;
+	*dma_handle = pa = virt_to_bus((void *)vaddr);
+#endif
 
 	/*
-	 * Set refcount=1 on all pages in an order>0
-	 * allocation so that vfree() will actually
-	 * free all pages that were allocated.
+	 * free wasted pages.  We skip the first page since we know
+	 * that it will have count = 1 and won't require freeing.
+	 * We also mark the pages in use as reserved so that
+	 * remap_page_range works.
 	 */
-	if (order > 0) {
-		struct page *rpage = virt_to_page(page);
-		for (i = 1; i < (1 << order); i++)
-			init_page_count(rpage+i);
+	page = virt_to_page(vaddr);
+	end = page + (1 << order);
+
+	split_page(page, order);
+
+	for (i = 0; i < size && err == 0; i += PAGE_SIZE) {
+#ifdef CONFIG_MMU
+		/* MS: This is the whole magic - use cache inhibit pages */
+		err = map_page(va + i, pa + i, _PAGE_KERNEL | _PAGE_NO_CACHE);
+#endif
+
+		SetPageReserved(page);
+		page++;
 	}
 
-	err = 0;
-	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
-		err = map_page(va+i, pa+i, flags);
+	/* Free the otherwise unused pages. */
+	while (page < end) {
+		__free_page(page);
+		page++;
+	}
 
 	if (err) {
-		vfree((void *)va);
+		free_pages(vaddr, order);
 		return NULL;
 	}
 
 	return ret;
 }
-#endif /* CONFIG_MMU */
 EXPORT_SYMBOL(consistent_alloc);
 
 /*
  * free page(s) as defined by the above mapping.
  */
-void consistent_free(void *vaddr)
+void consistent_free(size_t size, void *vaddr)
 {
+	struct page *page;
+
 	if (in_interrupt())
 		BUG();
 
+	size = PAGE_ALIGN(size);
+
+#ifndef CONFIG_MMU
 	/* Clear SHADOW_MASK bit in address, and free as per usual */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+# ifdef CONFIG_XILINX_UNCACHED_SHADOW
 	vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK);
+# endif
+	page = virt_to_page(vaddr);
+
+	do {
+		ClearPageReserved(page);
+		__free_page(page);
+		page++;
+	} while (size -= PAGE_SIZE);
+#else
+	do {
+		pte_t *ptep;
+		unsigned long pfn;
+
+		ptep = pte_offset_kernel(pmd_offset(pgd_offset_k(
+						(unsigned int)vaddr),
+					(unsigned int)vaddr),
+				(unsigned int)vaddr);
+		if (!pte_none(*ptep) && pte_present(*ptep)) {
+			pfn = pte_pfn(*ptep);
+			pte_clear(&init_mm, (unsigned int)vaddr, ptep);
+			if (pfn_valid(pfn)) {
+				page = pfn_to_page(pfn);
+
+				ClearPageReserved(page);
+				__free_page(page);
+			}
+		}
+		vaddr += PAGE_SIZE;
+	} while (size -= PAGE_SIZE);
+
+	/* flush tlb */
+	flush_tlb_all();
 #endif
-	vfree(vaddr);
 }
 EXPORT_SYMBOL(consistent_free);
 
@@ -221,7 +229,7 @@ void consistent_sync(void *vaddr, size_t size, int direction)
 	case PCI_DMA_NONE:
 		BUG();
 	case PCI_DMA_FROMDEVICE:	/* invalidate only */
-		flush_dcache_range(start, end);
+		invalidate_dcache_range(start, end);
 		break;
 	case PCI_DMA_TODEVICE:		/* writeback only */
 		flush_dcache_range(start, end);

arch/microblaze/mm/fault.c

@@ -273,16 +273,11 @@ bad_area_nosemaphore:
  * us unable to handle the page fault gracefully.
  */
 out_of_memory:
-	if (current->pid == 1) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
 	up_read(&mm->mmap_sem);
-	printk(KERN_WARNING "VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_exit(SIGKILL);
-	bad_page_fault(regs, address, SIGKILL);
+	if (!user_mode(regs))
+		bad_page_fault(regs, address, SIGKILL);
+	else
+		pagefault_out_of_memory();
 	return;
 
 do_sigbus:

arch/microblaze/mm/pgtable.c

@@ -161,24 +161,6 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 	return err;
 }
 
-void __init adjust_total_lowmem(void)
-{
-/* TBD */
-#if 0
-	unsigned long max_low_mem = MAX_LOW_MEM;
-
-	if (total_lowmem > max_low_mem) {
-		total_lowmem = max_low_mem;
-#ifndef CONFIG_HIGHMEM
-		printk(KERN_INFO "Warning, memory limited to %ld Mb, use "
-				"CONFIG_HIGHMEM to reach %ld Mb\n",
-				max_low_mem >> 20, total_memory >> 20);
-		total_memory = total_lowmem;
-#endif /* CONFIG_HIGHMEM */
-	}
-#endif
-}
-
 /*
  * Map in all of physical memory starting at CONFIG_KERNEL_START.
  */
@@ -206,24 +188,6 @@ void __init mapin_ram(void)
 /* is x a power of 2? */
 #define is_power_of_2(x)	((x) != 0 && (((x) & ((x) - 1)) == 0))
 
-/*
- * Set up a mapping for a block of I/O.
- * virt, phys, size must all be page-aligned.
- * This should only be called before ioremap is called.
- */
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
-			     unsigned int size, int flags)
-{
-	int i;
-
-	if (virt > CONFIG_KERNEL_START && virt < ioremap_bot)
-		ioremap_bot = ioremap_base = virt;
-
-	/* Put it in the page tables. */
-	for (i = 0; i < size; i += PAGE_SIZE)
-		map_page(virt + i, phys + i, flags);
-}
-
 /* Scan the real Linux page tables and return a PTE pointer for
  * a virtual address in a context.
  * Returns true (1) if PTE was found, zero otherwise.  The pointer to
@@ -274,3 +238,18 @@ unsigned long iopa(unsigned long addr)
 
 	return pa;
 }
+
+__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+		unsigned long address)
+{
+	pte_t *pte;
+	if (mem_init_done) {
+		pte = (pte_t *)__get_free_page(GFP_KERNEL |
+					__GFP_REPEAT | __GFP_ZERO);
+	} else {
+		pte = (pte_t *)early_get_page();
+		if (pte)
+			clear_page(pte);
+	}
+	return pte;
+}

arch/microblaze/pci/pci-common.c

@@ -1025,7 +1025,7 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
 
 	struct pci_dev *dev = bus->self;
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+	pci_bus_for_each_resource(bus, res, i) {
 		res = bus->resource[i];
 		if (!res)
 			continue;
@@ -1131,21 +1131,20 @@ static int skip_isa_ioresource_align(struct pci_dev *dev)
  * but we want to try to avoid allocating at 0x2900-0x2bff
  * which might have be mirrored at 0x0100-0x03ff..
  */
-void pcibios_align_resource(void *data, struct resource *res,
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
+	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
 		if (skip_isa_ioresource_align(dev))
-			return;
-		if (start & 0x300) {
+			return start;
+		if (start & 0x300)
 			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
 	}
+
+	return start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
@@ -1228,7 +1227,7 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 	pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
 		 pci_domain_nr(bus), bus->number);
 
-	for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+	pci_bus_for_each_resource(bus, res, i) {
 		res = bus->resource[i];
 		if (!res || !res->flags
 		    || res->start > res->end || res->parent)

arch/mips/Kconfig

@@ -49,7 +49,7 @@ config AR7
 	  family: TNETD7100, 7200 and 7300.
 
 config BCM47XX
-	bool "BCM47XX based boards"
+	bool "Broadcom BCM47XX based boards"
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
@@ -509,6 +509,7 @@ config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select DMA_COHERENT
+	select HAVE_PATA_PLATFORM
 	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -523,6 +524,7 @@ config SIBYTE_LITTLESUR
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
+	select HAVE_PATA_PLATFORM
 	select NR_CPUS_DEFAULT_2
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -1305,6 +1307,33 @@ config CPU_CAVIUM_OCTEON
 
 endchoice
 
+if CPU_LOONGSON2F
+config CPU_NOP_WORKAROUNDS
+	bool
+
+config CPU_JUMP_WORKAROUNDS
+	bool
+
+config CPU_LOONGSON2F_WORKAROUNDS
+	bool "Loongson 2F Workarounds"
+	default y
+	select CPU_NOP_WORKAROUNDS
+	select CPU_JUMP_WORKAROUNDS
+	help
+	  Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which
+	  require workarounds.  Without workarounds the system may hang
+	  unexpectedly.  For more information please refer to the gas
+	  -mfix-loongson2f-nop and -mfix-loongson2f-jump options.
+
+	  Loongson 2F03 and later have fixed these issues and no workarounds
+	  are needed.  The workarounds have no significant side effect on them
+	  but may decrease the performance of the system so this option should
+	  be disabled unless the kernel is intended to be run on 2F01 or 2F02
+	  systems.
+
+	  If unsure, please say Y.
+endif # CPU_LOONGSON2F
+
 config SYS_SUPPORTS_ZBOOT
 	bool
 	select HAVE_KERNEL_GZIP

arch/mips/Makefile

@@ -136,6 +136,19 @@ cflags-$(CONFIG_CPU_LOONGSON2E) += \
 	$(call cc-option,-march=loongson2e,-march=r4600)
 cflags-$(CONFIG_CPU_LOONGSON2F) += \
 	$(call cc-option,-march=loongson2f,-march=r4600)
+# enable the workarounds for loongson2f
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
+  else
+    cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
+  endif
+  ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
+    $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
+  else
+    cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
+  endif
+endif
 
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap

arch/mips/alchemy/devboards/db1200/setup.c

@@ -66,12 +66,16 @@ static int __init db1200_arch_init(void)
 	set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
 	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
 
-	/* do not autoenable these: CPLD has broken edge int handling,
-	 * and the CD handler setup requires manual enabling to work
-	 * around that.
+	/* insert/eject pairs: one of both is always screaming.  To avoid
+	 * issues they must not be automatically enabled when initially
+	 * requested.
 	 */
 	irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
 	irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN;
 
 	return 0;
 }

arch/mips/configs/bcm63xx_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Sun May 31 20:17:18 2009
+# Linux kernel version: 2.6.34-rc2
+# Tue Mar 23 10:36:32 2010
 #
 CONFIG_MIPS=y
 
@@ -9,13 +9,14 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
 # CONFIG_BCM47XX is not set
 CONFIG_BCM63XX=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_NEC_MARKEINS is not set
@@ -26,6 +27,7 @@ CONFIG_BCM63XX=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -45,13 +47,17 @@ CONFIG_BCM63XX=y
 # CONFIG_WR_PPMC is not set
 # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
 # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
 
 #
 # CPU support
 #
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
 CONFIG_BCM63XX_CPU_6348=y
 CONFIG_BCM63XX_CPU_6358=y
 CONFIG_BOARD_BCM963XX=y
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -69,10 +75,8 @@ CONFIG_CEVT_R4K=y
 CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -85,7 +89,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -128,7 +133,7 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -146,9 +151,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 # CONFIG_HIGH_RES_TIMERS is not set
@@ -170,6 +174,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -189,15 +194,12 @@ CONFIG_LOCALVERSION=""
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
 # CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -205,11 +207,11 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -223,6 +225,10 @@ CONFIG_BASE_FULL=y
 # CONFIG_EVENTFD is not set
 # CONFIG_SHMEM is not set
 # CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
@@ -231,14 +237,17 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -246,14 +255,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -263,15 +299,12 @@ CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 CONFIG_MMU=y
 CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
 CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
 CONFIG_CARDBUS=y
 
 #
@@ -295,6 +328,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 CONFIG_NET=y
@@ -333,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -347,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -359,7 +395,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=y
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +527,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -484,13 +541,16 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -529,6 +589,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
@@ -541,17 +602,48 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_ATL2 is not set
 CONFIG_BCM63XX_ENET=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA is not set
+CONFIG_B43_PIO=y
+# CONFIG_B43_PHY_LP is not set
+CONFIG_B43_LEDS=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -574,6 +666,7 @@ CONFIG_BCM63XX_ENET=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -607,6 +700,7 @@ CONFIG_BCM63XX_ENET=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_SERIAL_BCM63XX=y
 CONFIG_SERIAL_BCM63XX_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
@@ -629,6 +723,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -636,6 +735,8 @@ CONFIG_GPIOLIB=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
 
 #
 # I2C GPIO expanders:
@@ -644,16 +745,21 @@ CONFIG_GPIOLIB=y
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -662,15 +768,16 @@ CONFIG_SSB_POSSIBLE=y
 #
 CONFIG_SSB=y
 CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_B43_PCI_BRIDGE=y
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_SILENT is not set
 # CONFIG_SSB_DEBUG is not set
 CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-# CONFIG_SSB_DRIVER_PCICORE is not set
+CONFIG_SSB_DRIVER_PCICORE=y
 # CONFIG_SSB_DRIVER_MIPS is not set
 
 #
@@ -680,27 +787,15 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -710,11 +805,7 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
 #
 # Display device support
 #
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -741,13 +832,14 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_SSB is not set
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
@@ -796,7 +888,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -807,8 +898,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -819,7 +910,29 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -827,6 +940,10 @@ CONFIG_RTC_LIB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -838,12 +955,16 @@ CONFIG_RTC_LIB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FILE_LOCKING is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FILE_LOCKING is not set
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -875,8 +996,6 @@ CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -888,6 +1007,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -898,7 +1018,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -906,7 +1025,46 @@ CONFIG_MISC_FILESYSTEMS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -918,29 +1076,23 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
 # CONFIG_CMDLINE_OVERRIDE is not set
@@ -951,8 +1103,108 @@ CONFIG_CMDLINE="console=ttyS0,115200"
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
 # CONFIG_BINARY_PRINTF is not set
 
 #

arch/mips/include/asm/cmpxchg.h

@@ -16,7 +16,7 @@
 ({									\
 	__typeof(*(m)) __ret;						\
 									\
-	if (kernel_uses_llsc && R10000_LLSC_WAR) {				\
+	if (kernel_uses_llsc && R10000_LLSC_WAR) {			\
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\

arch/mips/include/asm/mach-loongson/loongson.h

@@ -307,7 +307,7 @@ extern unsigned long _loongson_addrwincfg_base;
  */
 #define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
 	s##_WIN##w##_BASE = (src); \
-	s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
+	s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \
 	s##_WIN##w##_MASK = ~(size-1); \
 } while (0)
 

arch/mips/include/asm/pgtable-64.h

@@ -120,9 +120,14 @@
 #endif
 #define FIRST_USER_ADDRESS	0UL
 
-#define VMALLOC_START		MAP_BASE
+/*
+ * TLB refill handlers also map the vmalloc area into xuseg.  Avoid
+ * the first couple of pages so NULL pointer dereferences will still
+ * reliably trap.
+ */
+#define VMALLOC_START		(MAP_BASE + (2 * PAGE_SIZE))
 #define VMALLOC_END	\
-	(VMALLOC_START + \
+	(MAP_BASE + \
 	 min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \
 	     (1UL << cpu_vmbits)) - (1UL << 32))
 

arch/mips/include/asm/ptrace.h

@@ -142,9 +142,9 @@ extern int ptrace_set_watch_regs(struct task_struct *child,
 
 extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
 
-extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET;
+extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
 
-static inline void die_if_kernel(const char *str, const struct pt_regs *regs)
+static inline void die_if_kernel(const char *str, struct pt_regs *regs)
 {
 	if (unlikely(!user_mode(regs)))
 		die(str, regs);

arch/mips/include/asm/stackframe.h

@@ -121,7 +121,7 @@
 		.endm
 #else
 		.macro	get_saved_sp	/* Uniprocessor variation */
-#ifdef CONFIG_CPU_LOONGSON2F
+#ifdef CONFIG_CPU_JUMP_WORKAROUNDS
 		/*
 		 * Clear BTB (branch target buffer), forbid RAS (return address
 		 * stack) to workaround the Out-of-order Issue in Loongson2F

arch/mips/include/asm/uasm.h

@@ -167,6 +167,24 @@ static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
 #define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
 #define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
 
+static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
+				    unsigned int a2, unsigned int a3)
+{
+	if (a3 < 32)
+		uasm_i_dsrl(p, a1, a2, a3);
+	else
+		uasm_i_dsrl32(p, a1, a2, a3 - 32);
+}
+
+static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1,
+				    unsigned int a2, unsigned int a3)
+{
+	if (a3 < 32)
+		uasm_i_dsll(p, a1, a2, a3);
+	else
+		uasm_i_dsll32(p, a1, a2, a3 - 32);
+}
+
 /* Handle relocations. */
 struct uasm_reloc {
 	u32 *addr;

arch/mips/jazz/setup.c

@@ -76,15 +76,9 @@ void __init plat_mem_setup(void)
 
 #ifdef CONFIG_VT
 	screen_info = (struct screen_info) {
-		0, 0,		/* orig-x, orig-y */
-		0,		/* unused */
-		0,		/* orig_video_page */
-		0,		/* orig_video_mode */
-		160,		/* orig_video_cols */
-		0, 0, 0,	/* unused, ega_bx, unused */
-		64,		/* orig_video_lines */
-		0,		/* orig_video_isVGA */
-		16		/* orig_video_points */
+		.orig_video_cols	= 160,
+		.orig_video_lines	= 64,
+		.orig_video_points	= 16,
 	};
 #endif
 

arch/mips/kernel/traps.c

@@ -352,9 +352,10 @@ void show_registers(const struct pt_regs *regs)
 
 static DEFINE_SPINLOCK(die_lock);
 
-void __noreturn die(const char * str, const struct pt_regs * regs)
+void __noreturn die(const char * str, struct pt_regs * regs)
 {
 	static int die_counter;
+	int sig = SIGSEGV;
 #ifdef CONFIG_MIPS_MT_SMTC
 	unsigned long dvpret = dvpe();
 #endif /* CONFIG_MIPS_MT_SMTC */
@@ -365,6 +366,10 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 #ifdef CONFIG_MIPS_MT_SMTC
 	mips_mt_regdump(dvpret);
 #endif /* CONFIG_MIPS_MT_SMTC */
+
+	if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+		sig = 0;
+
 	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
 	add_taint(TAINT_DIE);
@@ -379,7 +384,7 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 		panic("Fatal exception");
 	}
 
-	do_exit(SIGSEGV);
+	do_exit(sig);
 }
 
 extern struct exception_table_entry __start___dbe_table[];
@@ -1557,12 +1562,7 @@ static char panic_null_cerr[] __cpuinitdata =
 void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
 	unsigned long size)
 {
-#ifdef CONFIG_32BIT
-	unsigned long uncached_ebase = KSEG1ADDR(ebase);
-#endif
-#ifdef CONFIG_64BIT
-	unsigned long uncached_ebase = TO_UNCAC(ebase);
-#endif
+	unsigned long uncached_ebase = CKSEG1ADDR(ebase);
 
 	if (!addr)
 		panic(panic_null_cerr);

arch/mips/loongson/common/machtype.c

@@ -24,7 +24,7 @@ static const char *system_types[] = {
 	[MACH_LEMOTE_FL2F]              "lemote-fuloong-2f-box",
 	[MACH_LEMOTE_ML2F7]             "lemote-mengloong-2f-7inches",
 	[MACH_LEMOTE_YL2F89]            "lemote-yeeloong-2f-8.9inches",
-	[MACH_DEXXON_GDIUM2F10]         "dexxon-gidum-2f-10inches",
+	[MACH_DEXXON_GDIUM2F10]         "dexxon-gdium-2f",
 	[MACH_LEMOTE_NAS]		"lemote-nas-2f",
 	[MACH_LEMOTE_LL2F]              "lemote-lynloong-2f",
 	[MACH_LOONGSON_END]             NULL,

arch/mips/loongson/common/mem.c

@@ -75,7 +75,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 	unsigned long end = offset + size;
 
 	if (__uncached_access(file, offset)) {
-		if (((uca_start && offset) >= uca_start) &&
+		if (uca_start && (offset >= uca_start) &&
 		    (end <= uca_end))
 			return __pgprot((pgprot_val(vma_prot) &
 					 ~_CACHE_MASK) |
@@ -96,7 +96,7 @@ static int __init find_vga_mem_init(void)
 		return 0;
 
 	for_each_pci_dev(dev) {
-		if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
+		if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
 			for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
 				r = &dev->resource[idx];
 				if (!r->start && r->end)

arch/mips/loongson/common/reset.c

@@ -16,13 +16,31 @@
 
 #include <loongson.h>
 
+static inline void loongson_reboot(void)
+{
+#ifndef CONFIG_CPU_JUMP_WORKAROUNDS
+	((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+#else
+	void (*func)(void);
+
+	func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
+
+	__asm__ __volatile__(
+	"       .set    noat                                            \n"
+	"       jr      %[func]                                         \n"
+	"       .set    at                                              \n"
+	: /* No outputs */
+	: [func] "r" (func));
+#endif
+}
+
 static void loongson_restart(char *command)
 {
 	/* do preparation for reboot */
 	mach_prepare_reboot();
 
 	/* reboot via jumping to boot base address */
-	((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+	loongson_reboot();
 }
 
 static void loongson_poweroff(void)

arch/mips/loongson/common/setup.c

@@ -41,15 +41,12 @@ void __init plat_mem_setup(void)
 	conswitchp = &vga_con;
 
 	screen_info = (struct screen_info) {
-		0, 25,		/* orig-x, orig-y */
-		    0,		/* unused */
-		    0,		/* orig-video-page */
-		    0,		/* orig-video-mode */
-		    80,		/* orig-video-cols */
-		    0, 0, 0,	/* ega_ax, ega_bx, ega_cx */
-		    25,		/* orig-video-lines */
-		    VIDEO_TYPE_VGAC,	/* orig-video-isVGA */
-		    16		/* orig-video-points */
+		.orig_x			= 0,
+		.orig_y			= 25,
+		.orig_video_cols	= 80,
+		.orig_video_lines	= 25,
+		.orig_video_isVGA	= VIDEO_TYPE_VGAC,
+		.orig_video_points	= 16,
 	};
 #elif defined(CONFIG_DUMMY_CONSOLE)
 	conswitchp = &dummy_con;

arch/mips/loongson/lemote-2f/irq.c

@@ -79,7 +79,7 @@ void mach_irq_dispatch(unsigned int pending)
 	if (pending & CAUSEF_IP7)
 		do_IRQ(LOONGSON_TIMER_IRQ);
 	else if (pending & CAUSEF_IP6) {	/* North Bridge, Perf counter */
-#ifdef CONFIG_OPROFILE
+#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
 		do_IRQ(LOONGSON2_PERFCNT_IRQ);
 #endif
 		bonito_irqdispatch();

arch/mips/mm/tlbex.c

@@ -31,6 +31,16 @@
 #include <asm/war.h>
 #include <asm/uasm.h>
 
+/*
+ * TLB load/store/modify handlers.
+ *
+ * Only the fastpath gets synthesized at runtime, the slowpath for
+ * do_page_fault remains normal asm.
+ */
+extern void tlb_do_page_fault_0(void);
+extern void tlb_do_page_fault_1(void);
+
+
 static inline int r45k_bvahwbug(void)
 {
 	/* XXX: We should probe for the presence of this bug, but we don't. */
@@ -83,6 +93,7 @@ enum label_id {
 	label_nopage_tlbm,
 	label_smp_pgtable_change,
 	label_r3000_write_probe_fail,
+	label_large_segbits_fault,
 #ifdef CONFIG_HUGETLB_PAGE
 	label_tlb_huge_update,
 #endif
@@ -101,6 +112,7 @@ UASM_L_LA(_nopage_tlbs)
 UASM_L_LA(_nopage_tlbm)
 UASM_L_LA(_smp_pgtable_change)
 UASM_L_LA(_r3000_write_probe_fail)
+UASM_L_LA(_large_segbits_fault)
 #ifdef CONFIG_HUGETLB_PAGE
 UASM_L_LA(_tlb_huge_update)
 #endif
@@ -157,6 +169,10 @@ static u32 tlb_handler[128] __cpuinitdata;
 static struct uasm_label labels[128] __cpuinitdata;
 static struct uasm_reloc relocs[128] __cpuinitdata;
 
+#ifdef CONFIG_64BIT
+static int check_for_high_segbits __cpuinitdata;
+#endif
+
 #ifndef CONFIG_MIPS_PGD_C0_CONTEXT
 /*
  * CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current,
@@ -408,7 +424,7 @@ static __cpuinit __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 		UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
 	} else {
 #ifdef CONFIG_64BIT_PHYS_ADDR
-		uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL));
+		uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
 #else
 		UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL));
 #endif
@@ -532,7 +548,24 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	 * The vmalloc handling is not in the hotpath.
 	 */
 	uasm_i_dmfc0(p, tmp, C0_BADVADDR);
-	uasm_il_bltz(p, r, tmp, label_vmalloc);
+
+	if (check_for_high_segbits) {
+		/*
+		 * The kernel currently implicitely assumes that the
+		 * MIPS SEGBITS parameter for the processor is
+		 * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never
+		 * allocate virtual addresses outside the maximum
+		 * range for SEGBITS = (PGDIR_SHIFT+PGDIR_BITS). But
+		 * that doesn't prevent user code from accessing the
+		 * higher xuseg addresses.  Here, we make sure that
+		 * everything but the lower xuseg addresses goes down
+		 * the module_alloc/vmalloc path.
+		 */
+		uasm_i_dsrl_safe(p, ptr, tmp, PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+		uasm_il_bnez(p, r, ptr, label_vmalloc);
+	} else {
+		uasm_il_bltz(p, r, tmp, label_vmalloc);
+	}
 	/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
 
 #ifdef CONFIG_MIPS_PGD_C0_CONTEXT
@@ -549,14 +582,14 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 	 * SMTC uses TCBind value as "CPU" index
 	 */
 	uasm_i_mfc0(p, ptr, C0_TCBIND);
-	uasm_i_dsrl(p, ptr, ptr, 19);
+	uasm_i_dsrl_safe(p, ptr, ptr, 19);
 # else
 	/*
 	 * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
 	 * stored in CONTEXT.
 	 */
 	uasm_i_dmfc0(p, ptr, C0_CONTEXT);
-	uasm_i_dsrl(p, ptr, ptr, 23);
+	uasm_i_dsrl_safe(p, ptr, ptr, 23);
 # endif
 	UASM_i_LA_mostly(p, tmp, pgdc);
 	uasm_i_daddu(p, ptr, ptr, tmp);
@@ -569,44 +602,78 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 
 	uasm_l_vmalloc_done(l, *p);
 
-	if (PGDIR_SHIFT - 3 < 32)		/* get pgd offset in bytes */
-		uasm_i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3);
-	else
-		uasm_i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32);
+	/* get pgd offset in bytes */
+	uasm_i_dsrl_safe(p, tmp, tmp, PGDIR_SHIFT - 3);
 
 	uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3);
 	uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */
 #ifndef __PAGETABLE_PMD_FOLDED
 	uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */
 	uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */
-	uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
+	uasm_i_dsrl_safe(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
 	uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3);
 	uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */
 #endif
 }
 
+enum vmalloc64_mode {not_refill, refill};
 /*
  * BVADDR is the faulting address, PTR is scratch.
  * PTR will hold the pgd for vmalloc.
  */
 static void __cpuinit
 build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
-			unsigned int bvaddr, unsigned int ptr)
+			unsigned int bvaddr, unsigned int ptr,
+			enum vmalloc64_mode mode)
 {
 	long swpd = (long)swapper_pg_dir;
+	int single_insn_swpd;
+	int did_vmalloc_branch = 0;
+
+	single_insn_swpd = uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd);
 
 	uasm_l_vmalloc(l, *p);
 
-	if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
-		uasm_il_b(p, r, label_vmalloc_done);
-		uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
-	} else {
-		UASM_i_LA_mostly(p, ptr, swpd);
-		uasm_il_b(p, r, label_vmalloc_done);
-		if (uasm_in_compat_space_p(swpd))
-			uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
-		else
-			uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+	if (mode == refill && check_for_high_segbits) {
+		if (single_insn_swpd) {
+			uasm_il_bltz(p, r, bvaddr, label_vmalloc_done);
+			uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+			did_vmalloc_branch = 1;
+			/* fall through */
+		} else {
+			uasm_il_bgez(p, r, bvaddr, label_large_segbits_fault);
+		}
+	}
+	if (!did_vmalloc_branch) {
+		if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
+			uasm_il_b(p, r, label_vmalloc_done);
+			uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+		} else {
+			UASM_i_LA_mostly(p, ptr, swpd);
+			uasm_il_b(p, r, label_vmalloc_done);
+			if (uasm_in_compat_space_p(swpd))
+				uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
+			else
+				uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+		}
+	}
+	if (mode == refill && check_for_high_segbits) {
+		uasm_l_large_segbits_fault(l, *p);
+		/*
+		 * We get here if we are an xsseg address, or if we are
+		 * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
+		 *
+		 * Ignoring xsseg (assume disabled so would generate
+		 * (address errors?), the only remaining possibility
+		 * is the upper xuseg addresses.  On processors with
+		 * TLB_SEGBITS <= PGDIR_SHIFT+PGDIR_BITS, these
+		 * addresses would have taken an address error. We try
+		 * to mimic that here by taking a load/istream page
+		 * fault.
+		 */
+		UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
+		uasm_i_jr(p, ptr);
+		uasm_i_nop(p);
 	}
 }
 
@@ -720,9 +787,9 @@ static void __cpuinit build_update_entries(u32 **p, unsigned int tmp,
 			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
 			UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
 		} else {
-			uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
+			uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
 			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-			uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
+			uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
 		}
 		UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
 	} else {
@@ -793,9 +860,9 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 		uasm_i_dmfc0(&p, K0, C0_BADVADDR);
 		uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
 		uasm_i_xor(&p, K0, K0, K1);
-		uasm_i_dsrl32(&p, K1, K0, 62 - 32);
-		uasm_i_dsrl(&p, K0, K0, 12 + 1);
-		uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+		uasm_i_dsrl_safe(&p, K1, K0, 62);
+		uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+		uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
 		uasm_i_or(&p, K0, K0, K1);
 		uasm_il_bnez(&p, &r, K0, label_leave);
 		/* No need for uasm_i_nop */
@@ -825,7 +892,7 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 #endif
 
 #ifdef CONFIG_64BIT
-	build_get_pgd_vmalloc64(&p, &l, &r, K0, K1);
+	build_get_pgd_vmalloc64(&p, &l, &r, K0, K1, refill);
 #endif
 
 	/*
@@ -934,15 +1001,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 	dump_handler((u32 *)ebase, 64);
 }
 
-/*
- * TLB load/store/modify handlers.
- *
- * Only the fastpath gets synthesized at runtime, the slowpath for
- * do_page_fault remains normal asm.
- */
-extern void tlb_do_page_fault_0(void);
-extern void tlb_do_page_fault_1(void);
-
 /*
  * 128 instructions for the fastpath handler is generous and should
  * never be exceeded.
@@ -1302,7 +1360,7 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l,
 	uasm_i_eret(p); /* return from trap */
 
 #ifdef CONFIG_64BIT
-	build_get_pgd_vmalloc64(p, l, r, tmp, ptr);
+	build_get_pgd_vmalloc64(p, l, r, tmp, ptr, not_refill);
 #endif
 }
 
@@ -1322,9 +1380,9 @@ static void __cpuinit build_r4000_tlb_load_handler(void)
 		uasm_i_dmfc0(&p, K0, C0_BADVADDR);
 		uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
 		uasm_i_xor(&p, K0, K0, K1);
-		uasm_i_dsrl32(&p, K1, K0, 62 - 32);
-		uasm_i_dsrl(&p, K0, K0, 12 + 1);
-		uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
+		uasm_i_dsrl_safe(&p, K1, K0, 62);
+		uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+		uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
 		uasm_i_or(&p, K0, K0, K1);
 		uasm_il_bnez(&p, &r, K0, label_leave);
 		/* No need for uasm_i_nop */
@@ -1526,6 +1584,10 @@ void __cpuinit build_tlb_refill_handler(void)
 	 */
 	static int run_once = 0;
 
+#ifdef CONFIG_64BIT
+	check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+#endif
+
 	switch (current_cpu_type()) {
 	case CPU_R2000:
 	case CPU_R3000:

arch/mips/nxp/pnx8550/common/reset.c

@@ -20,6 +20,8 @@
  * Reset the PNX8550 board.
  *
  */
+#include <linux/kernel.h>
+
 #include <asm/reboot.h>
 #include <glb.h>
 

arch/mips/pci/pci-sb1250.c

@@ -37,6 +37,7 @@
 #include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/tty.h>
+#include <linux/vt.h>
 
 #include <asm/io.h>
 
@@ -254,7 +255,7 @@ static int __init sb1250_pcibios_init(void)
 	 * XXX ehs: Should this happen in PCI Device mode?
 	 */
 	io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
-	sb1250_controller.io_map_base = io_map_base;
+	sb1250_controller.io_map_base = (unsigned long)io_map_base;
 	set_io_port_base((unsigned long)io_map_base);
 
 #ifdef CONFIG_SIBYTE_HAS_LDT

arch/mips/sgi-ip22/ip22-berr.c

@@ -89,7 +89,7 @@ static void print_buserr(void)
 void ip22_be_interrupt(int irq)
 {
 	const int field = 2 * sizeof(unsigned long);
-	const struct pt_regs *regs = get_irq_regs();
+	struct pt_regs *regs = get_irq_regs();
 
 	save_and_clear_buserr();
 	print_buserr();

arch/mips/sgi-ip22/ip28-berr.c

@@ -453,7 +453,7 @@ mips_be_fatal:
 
 void ip22_be_interrupt(int irq)
 {
-	const struct pt_regs *regs = get_irq_regs();
+	struct pt_regs *regs = get_irq_regs();
 
 	count_be_interrupt++;
 

arch/mips/sibyte/swarm/setup.c

@@ -145,15 +145,14 @@ void __init plat_mem_setup(void)
 
 #ifdef CONFIG_VT
 	screen_info = (struct screen_info) {
-		0, 0,           /* orig-x, orig-y */
-		0,              /* unused */
-		52,             /* orig_video_page */
-		3,              /* orig_video_mode */
-		80,             /* orig_video_cols */
-		4626, 3, 9,     /* unused, ega_bx, unused */
-		25,             /* orig_video_lines */
-		0x22,           /* orig_video_isVGA */
-		16              /* orig_video_points */
+		.orig_video_page	= 52,
+		.orig_video_mode	= 3,
+		.orig_video_cols	= 80,
+		.flags			= 12,
+		.orig_video_ega_bx	= 3,
+		.orig_video_lines	= 25,
+		.orig_video_isVGA	= 0x22,
+		.orig_video_points	= 16,
        };
        /* XXXKW for CFE, get lines/cols from environment */
 #endif

arch/sh/configs/rts7751r2d1_defconfig

@@ -877,7 +877,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y

arch/sh/configs/rts7751r2dplus_defconfig

@@ -963,7 +963,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 # CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y

arch/sh/drivers/pci/pci-sh7751.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include "pci-sh4.h"
 #include <asm/addrspace.h>
+#include <asm/sizes.h>
 
 static int __init __area_sdram_check(struct pci_channel *chan,
 				     unsigned int area)
@@ -47,8 +48,8 @@ static int __init __area_sdram_check(struct pci_channel *chan,
 static struct resource sh7751_pci_resources[] = {
 	{
 		.name	= "SH7751_IO",
-		.start	= SH7751_PCI_IO_BASE,
-		.end	= SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+		.start	= 0x1000,
+		.end	= SZ_4M - 1,
 		.flags	= IORESOURCE_IO
 	}, {
 		.name	= "SH7751_mem",

arch/sh/include/cpu-sh4/cpu/dma-register.h

@@ -76,7 +76,7 @@ enum {
 }
 
 #define TS_INDEX2VAL(i)	((((i) & 3) << CHCR_TS_LOW_SHIFT) | \
-			 ((((i) >> 2) & 3) << CHCR_TS_HIGH_SHIFT))
+			 (((i) & 0xc) << CHCR_TS_HIGH_SHIFT))
 
 #else /* CONFIG_CPU_SH4A */
 

arch/x86/include/asm/io.h

@@ -347,6 +347,7 @@ extern void __iomem *early_ioremap(resource_size_t phys_addr,
 extern void __iomem *early_memremap(resource_size_t phys_addr,
 				    unsigned long size);
 extern void early_iounmap(void __iomem *addr, unsigned long size);
+extern void fixup_early_ioremap(void);
 
 #define IO_SPACE_LIMIT 0xffff
 

arch/x86/kernel/apic/io_apic.c

@@ -2545,6 +2545,9 @@ void irq_force_complete_move(int irq)
 	struct irq_desc *desc = irq_to_desc(irq);
 	struct irq_cfg *cfg = desc->chip_data;
 
+	if (!cfg)
+		return;
+
 	__irq_complete_move(&desc, cfg->vector);
 }
 #else

arch/x86/kernel/cpu/cpufreq/powernow-k8.c

@@ -929,7 +929,8 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data,
 		powernow_table[i].index = index;
 
 		/* Frequency may be rounded for these */
-		if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+		if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
+				 || boot_cpu_data.x86 == 0x11) {
 			powernow_table[i].frequency =
 				freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
 		} else

arch/x86/lib/rwsem_64.S

@@ -60,7 +60,7 @@ ENTRY(call_rwsem_down_write_failed)
 	ENDPROC(call_rwsem_down_write_failed)
 
 ENTRY(call_rwsem_wake)
-	decw %dx    /* do nothing if still outstanding active readers */
+	decl %edx	/* do nothing if still outstanding active readers */
 	jnz 1f
 	save_common_regs
 	movq %rax,%rdi

arch/x86/mm/ioremap.c

@@ -448,6 +448,20 @@ static inline void __init early_clear_fixmap(enum fixed_addresses idx)
 static void __iomem *prev_map[FIX_BTMAPS_SLOTS] __initdata;
 static unsigned long prev_size[FIX_BTMAPS_SLOTS] __initdata;
 
+void __init fixup_early_ioremap(void)
+{
+	int i;
+
+	for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {
+		if (prev_map[i]) {
+			WARN_ON(1);
+			break;
+		}
+	}
+
+	early_ioremap_init();
+}
+
 static int __init check_early_ioremap_leak(void)
 {
 	int count = 0;

arch/x86/mm/pgtable_32.c

@@ -18,6 +18,7 @@
 #include <asm/e820.h>
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
+#include <asm/io.h>
 
 unsigned int __VMALLOC_RESERVE = 128 << 20;
 
@@ -128,6 +129,7 @@ static int __init parse_reservetop(char *arg)
 
 	address = memparse(arg, &arg);
 	reserve_top_address(address);
+	fixup_early_ioremap();
 	return 0;
 }
 early_param("reservetop", parse_reservetop);

block/blk-cgroup.c

@@ -286,16 +286,16 @@ done:
 static struct cgroup_subsys_state *
 blkiocg_create(struct cgroup_subsys *subsys, struct cgroup *cgroup)
 {
-	struct blkio_cgroup *blkcg, *parent_blkcg;
+	struct blkio_cgroup *blkcg;
+	struct cgroup *parent = cgroup->parent;
 
-	if (!cgroup->parent) {
+	if (!parent) {
 		blkcg = &blkio_root_cgroup;
 		goto done;
 	}
 
 	/* Currently we do not support hierarchy deeper than two level (0,1) */
-	parent_blkcg = cgroup_to_blkio_cgroup(cgroup->parent);
-	if (css_depth(&parent_blkcg->css) > 0)
+	if (parent != cgroup->top_cgroup)
 		return ERR_PTR(-EINVAL);
 
 	blkcg = kzalloc(sizeof(*blkcg), GFP_KERNEL);

block/cfq-iosched.c

@@ -3694,8 +3694,10 @@ static void *cfq_init_queue(struct request_queue *q)
 	 * to make sure that cfq_put_cfqg() does not try to kfree root group
 	 */
 	atomic_set(&cfqg->ref, 1);
+	rcu_read_lock();
 	blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg, (void *)cfqd,
 					0);
+	rcu_read_unlock();
 #endif
 	/*
 	 * Not strictly needed (since RB_ROOT just clears the node and we

crypto/async_tx/async_raid6_recov.c

@@ -324,6 +324,7 @@ struct dma_async_tx_descriptor *
 async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
 			struct page **blocks, struct async_submit_ctl *submit)
 {
+	void *scribble = submit->scribble;
 	int non_zero_srcs, i;
 
 	BUG_ON(faila == failb);
@@ -332,11 +333,13 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
 
 	pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
 
-	/* we need to preserve the contents of 'blocks' for the async
-	 * case, so punt to synchronous if a scribble buffer is not available
+	/* if a dma resource is not available or a scribble buffer is not
+	 * available punt to the synchronous path.  In the 'dma not
+	 * available' case be sure to use the scribble buffer to
+	 * preserve the content of 'blocks' as the caller intended.
 	 */
-	if (!submit->scribble) {
-		void **ptrs = (void **) blocks;
+	if (!async_dma_find_channel(DMA_PQ) || !scribble) {
+		void **ptrs = scribble ? scribble : (void **) blocks;
 
 		async_tx_quiesce(&submit->depend_tx);
 		for (i = 0; i < disks; i++)
@@ -406,11 +409,13 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila,
 
 	pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
 
-	/* we need to preserve the contents of 'blocks' for the async
-	 * case, so punt to synchronous if a scribble buffer is not available
+	/* if a dma resource is not available or a scribble buffer is not
+	 * available punt to the synchronous path.  In the 'dma not
+	 * available' case be sure to use the scribble buffer to
+	 * preserve the content of 'blocks' as the caller intended.
 	 */
-	if (!scribble) {
-		void **ptrs = (void **) blocks;
+	if (!async_dma_find_channel(DMA_PQ) || !scribble) {
+		void **ptrs = scribble ? scribble : (void **) blocks;
 
 		async_tx_quiesce(&submit->depend_tx);
 		for (i = 0; i < disks; i++)

drivers/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_SFI)		+= sfi/
 obj-$(CONFIG_PNP)		+= pnp/
 obj-$(CONFIG_ARM_AMBA)		+= amba/
 
+obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_XEN)		+= xen/
 
 # regulators early, since some subsystems rely on them to initialize
@@ -108,7 +109,6 @@ obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
 obj-$(CONFIG_VHOST_NET)		+= vhost/
-obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_VLYNQ)		+= vlynq/
 obj-$(CONFIG_STAGING)		+= staging/
 obj-y				+= platform/

drivers/acpi/acpi_pad.c

@@ -31,7 +31,7 @@
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
-#define ACPI_PROCESSOR_AGGREGATOR_CLASS	"processor_aggregator"
+#define ACPI_PROCESSOR_AGGREGATOR_CLASS	"acpi_pad"
 #define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
 #define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
 static DEFINE_MUTEX(isolated_cpus_lock);

drivers/acpi/bus.c

@@ -527,7 +527,7 @@ int acpi_bus_generate_proc_event4(const char *device_class, const char *bus_id,
 	if (!event_is_open)
 		return 0;
 
-	event = kmalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC);
+	event = kzalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC);
 	if (!event)
 		return -ENOMEM;