ath9k: avoid enabling interrupts while processing rx

The assumsion is that while processing ath9k tasklet,
interrupts were already disabled and it will be enabled
at the completion of ath9k tasklet. But whenever TSFOOR is raised,
the driver configures the beacon timers after having received a
beacon frame from the AP which inturn enables the interrupts.

Cc: stable@kernel.org
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ath9k.h

@@ -564,6 +564,7 @@ struct ath_ant_comb {
 #define PS_WAIT_FOR_PSPOLL_DATA   BIT(2)
 #define PS_WAIT_FOR_TX_ACK        BIT(3)
 #define PS_BEACON_SYNC            BIT(4)
+#define PS_TSFOOR_SYNC            BIT(5)
 
 struct ath_rate_table;
 

drivers/net/wireless/ath/ath9k/beacon.c

@@ -620,7 +620,13 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	ath9k_hw_disable_interrupts(ah);
 	ath9k_hw_set_sta_beacon_timers(ah, &bs);
 	ah->imask |= ATH9K_INT_BMISS;
-	ath9k_hw_set_interrupts(ah, ah->imask);
+
+	/*
+	 * If the beacon config is called beacause of TSFOOR,
+	 * Interrupts will be enabled back at the end of ath9k_tasklet
+	 */
+	if (!(sc->ps_flags & PS_TSFOOR_SYNC))
+		ath9k_hw_set_interrupts(ah, ah->imask);
 }
 
 static void ath_beacon_config_adhoc(struct ath_softc *sc,
@@ -661,7 +667,12 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 	ath9k_hw_disable_interrupts(ah);
 	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
-	ath9k_hw_set_interrupts(ah, ah->imask);
+	/*
+	 * If the beacon config is called beacause of TSFOOR,
+	 * Interrupts will be enabled back at the end of ath9k_tasklet
+	 */
+	if (!(sc->ps_flags & PS_TSFOOR_SYNC))
+		ath9k_hw_set_interrupts(ah, ah->imask);
 }
 
 static bool ath9k_allow_beacon_config(struct ath_softc *sc,

drivers/net/wireless/ath/ath9k/main.c

@@ -718,7 +718,8 @@ void ath9k_tasklet(unsigned long data)
 		 */
 		ath_dbg(common, ATH_DBG_PS,
 			"TSFOOR - Sync with next Beacon\n");
-		sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
+		sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC |
+				PS_TSFOOR_SYNC;
 	}
 
 	if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)

drivers/net/wireless/ath/ath9k/recv.c

@@ -572,6 +572,7 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 		ath_dbg(common, ATH_DBG_PS,
 			"Reconfigure Beacon timers based on timestamp from the AP\n");
 		ath_set_beacon(sc);
+		sc->ps_flags &= ~PS_TSFOOR_SYNC;
 	}
 
 	if (ath_beacon_dtim_pending_cab(skb)) {