ARM: mvebu: Relocate Armada 370/XP DeviceBus device tree nodes

Now that mbus has been added to the device tree, it's possible to
move the DeviceBus out of internal registers, placing it directly
below the mbus. This is a more accurate representation of the hardware.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -45,6 +45,56 @@
 		controller = <&mbusc>;
 		interrupt-parent = <&mpic>;
 
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
 		internal-regs {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -200,50 +250,6 @@
 				status = "disabled";
 			};
 
-			devbus-bootcs@10400 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10400 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs0@10408 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10408 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs1@10410 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10410 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs2@10418 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10418 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs3@10420 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10420 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
 		};
 	};
  };

arch/arm/boot/dts/armada-xp-db.dts

@@ -31,7 +31,36 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -160,34 +189,6 @@
 				};
 			};
 
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x1000000>;
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 16 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x1000000>;
-					bank-width = <2>;
-				};
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-gp.dts

@@ -40,7 +40,36 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -126,35 +155,6 @@
 				};
 			};
 
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 16 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x1000000>;
-					bank-width = <2>;
-				};
-			};
-
 			pcie-controller {
 				status = "okay";
 

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -28,7 +28,36 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 128 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -148,40 +177,6 @@
 				status = "okay";
 			};
 
-			/* USB interface in the mini-PCIe connector */
-			usb@52000 {
-				status = "okay";
-			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 128 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x8000000>;
-					bank-width = <2>;
-				};
-			};
-
 			pcie-controller {
 				status = "okay";
 				/* Internal mini-PCIe connector */