Merge branch 'devel-stable' into devel

Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c

CREDITS

@@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de
 D: The Linux Support Team Erlangen
 
 N: Andreas Koensgen
-E: ajk@iehk.rwth-aachen.de
+E: ajk@comnets.uni-bremen.de
 D: 6pack driver for AX.25
 
 N: Harald Koerfgen
@@ -2006,6 +2006,9 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
+N: Jonathan Layes
+D: ARPD support
+
 N: Tom Lees
 E: tom@lpsg.demon.co.uk
 W: http://www.lpsg.demon.co.uk/
@@ -3802,6 +3805,9 @@ S: van Bronckhorststraat 12
 S: 2612 XV Delft
 S: The Netherlands
 
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
 N: David Woodhouse
 E: dwmw2@infradead.org
 D: JFFS2 file system, Memory Technology Device subsystem,

Documentation/RCU/rculist_nulls.txt

@@ -83,11 +83,12 @@ not detect it missed following items in original chain.
 obj = kmem_cache_alloc(...);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
-atomic_inc(&obj->refcnt);
 /*
  * we need to make sure obj->key is updated before obj->next
+ * or obj->refcnt
  */
 smp_wmb();
+atomic_set(&obj->refcnt, 1);
 hlist_add_head_rcu(&obj->obj_node, list);
 unlock_chain(); // typically a spin_unlock()
 
@@ -159,6 +160,10 @@ out:
 obj = kmem_cache_alloc(cachep);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
+/*
+ * changes to obj->key must be visible before refcnt one
+ */
+smp_wmb();
 atomic_set(&obj->refcnt, 1);
 /*
  * insert obj in RCU way (readers might be traversing chain)

Documentation/arm/Samsung-S3C24XX/CPUfreq.txt

@@ -0,0 +1,75 @@
+		S3C24XX CPUfreq support
+		=======================
+
+Introduction
+------------
+
+ The S3C24XX series support a number of power saving systems, such as
+ the ability to change the core, memory and peripheral operating
+ frequencies. The core control is exported via the CPUFreq driver
+ which has a number of different manual or automatic controls over the
+ rate the core is running at.
+
+ There are two forms of the driver depending on the specific CPU and
+ how the clocks are arranged. The first implementation used as single
+ PLL to feed the ARM, memory and peripherals via a series of dividers
+ and muxes and this is the implementation that is documented here. A
+ newer version where there is a seperate PLL and clock divider for the
+ ARM core is available as a seperate driver.
+
+
+Layout
+------
+
+ The code core manages the CPU specific drivers, any data that they
+ need to register and the interface to the generic drivers/cpufreq
+ system. Each CPU registers a driver to control the PLL, clock dividers
+ and anything else associated with it. Any board that wants to use this
+ framework needs to supply at least basic details of what is required.
+
+ The core registers with drivers/cpufreq at init time if all the data
+ necessary has been supplied.
+
+
+CPU support
+-----------
+
+ The support for each CPU depends on the facilities provided by the
+ SoC and the driver as each device has different PLL and clock chains
+ associated with it.
+
+
+Slow Mode
+---------
+
+ The SLOW mode where the PLL is turned off altogether and the
+ system is fed by the external crystal input is currently not
+ supported.
+
+
+sysfs
+-----
+
+ The core code exports extra information via sysfs in the directory
+ devices/system/cpu/cpu0/arch-freq.
+
+
+Board Support
+-------------
+
+ Each board that wants to use the cpufreq code must register some basic
+ information with the core driver to provide information about what the
+ board requires and any restrictions being placed on it.
+
+ The board needs to supply information about whether it needs the IO bank
+ timings changing, any maximum frequency limits and information about the
+ SDRAM refresh rate.
+
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2009 Simtec Electronics
+Licensed under GPLv2

Documentation/connector/cn_test.c

@@ -1,7 +1,7 @@
 /*
  * 	cn_test.c
  * 
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  * 
  * This program is free software; you can redistribute it and/or modify
@@ -194,5 +194,5 @@ module_init(cn_test_init);
 module_exit(cn_test_fini);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Connector's test module");

Documentation/connector/ucon.c

@@ -1,7 +1,7 @@
 /*
  * 	ucon.c
  *
- * Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
  *
  *
  * This program is free software; you can redistribute it and/or modify

Documentation/driver-model/driver.txt

@@ -207,8 +207,8 @@ Attributes
 ~~~~~~~~~~
 struct driver_attribute {
         struct attribute        attr;
-        ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off);
+        ssize_t (*show)(struct device_driver *driver, char *buf);
+        ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
 };
 
 Device drivers can export attributes via their sysfs directories. 

Documentation/filesystems/sysfs.txt

@@ -23,7 +23,8 @@ interface.
 Using sysfs
 ~~~~~~~~~~~
 
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
 
     mount -t sysfs sysfs /sys 
 

Documentation/networking/6pack.txt

@@ -1,7 +1,7 @@
 This is the 6pack-mini-HOWTO, written by
 
 Andreas Könsgen DG3KQ
-Internet: ajk@iehk.rwth-aachen.de
+Internet: ajk@comnets.uni-bremen.de
 AMPR-net: dg3kq@db0pra.ampr.org
 AX.25:    dg3kq@db0ach.#nrw.deu.eu
 

Documentation/scheduler/sched-rt-group.txt

@@ -73,7 +73,7 @@ The remaining CPU time will be used for user input and other tasks. Because
 realtime tasks have explicitly allocated the CPU time they need to perform
 their tasks, buffer underruns in the graphics or audio can be eliminated.
 
-NOTE: the above example is not fully implemented as of yet (2.6.25). We still
+NOTE: the above example is not fully implemented yet. We still
 lack an EDF scheduler to make non-uniform periods usable.
 
 
@@ -140,14 +140,15 @@ The other option is:
 
 .o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
 
-This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us"
-to control the CPU time reserved for each control group instead.
+This uses the /cgroup virtual file system and
+"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+control group instead.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
 
-Group settings are checked against the following limits in order to keep the configuration
-schedulable:
+Group settings are checked against the following limits in order to keep the
+configuration schedulable:
 
    \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
 
@@ -189,7 +190,7 @@ Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
 the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
-deadline delta (deadline - now).
+deadline delta (deadline - now)).
 
 This means the whole PI machinery will have to be reworked - and that is one of
 the most complex pieces of code we have.

Documentation/sound/alsa/Procfile.txt

@@ -101,6 +101,8 @@ card*/pcm*/xrun_debug
 	  bit 0 = Enable XRUN/jiffies debug messages
 	  bit 1 = Show stack trace at XRUN / jiffies check
 	  bit 2 = Enable additional jiffies check
+	  bit 3 = Log hwptr update at each period interrupt
+	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -117,6 +119,9 @@ card*/pcm*/xrun_debug
 	buggy) hardware that doesn't give smooth pointer updates.
 	This feature is enabled via the bit 2.
 
+	Bits 3 and 4 are for logging the hwptr records.  Note that
+	these will give flood of kernel messages.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 

Documentation/sysrq.txt

@@ -66,7 +66,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 'b'     - Will immediately reboot the system without syncing or unmounting
           your disks.
 
-'c'	- Will perform a kexec reboot in order to take a crashdump.
+'c'	- Will perform a system crash by a NULL pointer dereference.
+          A crashdump will be taken if configured.
 
 'd'	- Shows all locks that are held.
 
@@ -141,8 +142,8 @@ useful when you want to exit a program that will not let you switch consoles.
 re'B'oot is good when you're unable to shut down. But you should also 'S'ync
 and 'U'mount first.
 
-'C'rashdump can be used to manually trigger a crashdump when the system is hung.
-The kernel needs to have been built with CONFIG_KEXEC enabled.
+'C'rash can be used to manually trigger a crashdump when the system is hung.
+Note that this just triggers a crash if there is no dump mechanism available.
 
 'S'ync is great when your system is locked up, it allows you to sync your
 disks and will certainly lessen the chance of data loss and fscking. Note

Documentation/video4linux/CARDLIST.em28xx

@@ -20,7 +20,7 @@
  19 -> EM2860/SAA711X Reference Design          (em2860)
  20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
  21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber      (em2750)        [eb1a:2750,eb1a:2751]
  23 -> Huaqi DLCW-130                           (em2750)
  24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
  25 -> Gadmei UTV310                            (em2820/em2840)

Documentation/video4linux/gspca.txt

@@ -44,7 +44,9 @@ zc3xx		0458:7007	Genius VideoCam V2
 zc3xx		0458:700c	Genius VideoCam V3
 zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
+sn9c20x		0458:7029	Genius Look 320s
 sonixj		0458:702e	Genius Slim 310 NB
+sn9c20x		045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)
 sonixj		045e:00f5	MicroSoft VX3000
 sonixj		045e:00f7	MicroSoft VX1000
 ov519		045e:028c	Micro$oft xbox cam
@@ -282,6 +284,28 @@ sonixj		0c45:613a	Microdia Sonix PC Camera
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
 sonixj		0c45:6143	Sonix Pccam168
+sn9c20x		0c45:6240	PC Camera (SN9C201 + MT9M001)
+sn9c20x		0c45:6242	PC Camera (SN9C201 + MT9M111)
+sn9c20x		0c45:6248	PC Camera (SN9C201 + OV9655)
+sn9c20x		0c45:624e	PC Camera (SN9C201 + SOI968)
+sn9c20x		0c45:624f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6251	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6253	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6260	PC Camera (SN9C201 + OV7670)
+sn9c20x		0c45:6270	PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:627b	PC Camera (SN9C201 + OV7660)
+sn9c20x		0c45:627c	PC Camera (SN9C201 + HV7131R)
+sn9c20x		0c45:627f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6280	PC Camera (SN9C202 + MT9M001)
+sn9c20x		0c45:6282	PC Camera (SN9C202 + MT9M111)
+sn9c20x		0c45:6288	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:628e	PC Camera (SN9C202 + SOI968)
+sn9c20x		0c45:628f	PC Camera (SN9C202 + OV9650)
+sn9c20x		0c45:62a0	PC Camera (SN9C202 + OV7670)
+sn9c20x		0c45:62b0	PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:62b3	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:62bb	PC Camera (SN9C202 + OV7660)
+sn9c20x		0c45:62bc	PC Camera (SN9C202 + HV7131R)
 sunplus		0d64:0303	Sunplus FashionCam DXG
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
@@ -290,6 +314,7 @@ spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 ov534		1415:2000	Sony HD Eye for PS3 (SLEH 00201)
 pac207		145f:013a	Trust WB-1300N
+sn9c20x		145f:013d	Trust WB-3600R
 vc032x		15b8:6001	HP 2.0 Megapixel
 vc032x		15b8:6002	HP 2.0 Megapixel rz406aa
 spca501		1776:501c	Arowana 300K CMOS Camera
@@ -300,4 +325,11 @@ spca500		2899:012c	Toptro Industrial
 spca508		8086:0110	Intel Easy PC Camera
 spca500		8086:0630	Intel Pocket PC Camera
 spca506		99fa:8988	Grandtec V.cap
+sn9c20x		a168:0610	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0611	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0613	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0618	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0614	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0615	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0617	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
 spca561		abcd:cdee	Petcam

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -343,7 +343,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
 		   -Werror-implicit-function-declaration \
-		   -Wno-format-security
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -565,7 +566,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS	+= $(call cc-option,-fwrapv)
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
 # revert to pre-gcc-4.4 behaviour of .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)

arch/alpha/include/asm/tlb.h

@@ -9,7 +9,7 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)			pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd)			pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address)		pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address)		pmd_free((tlb)->mm, pmd)
  
 #endif

arch/alpha/kernel/ptrace.c

@@ -8,7 +8,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>

arch/arm/Kconfig

@@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
-config MMU
-	bool
-	default y
-
 config NO_IOPORT
 	bool
 
@@ -126,6 +122,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
+config ARCH_HAS_CPUFREQ
+	bool
+	help
+	  Internal node to signify that the ARCH has CPUFREQ support
+	  and that the relevant menu configurations are displayed for
+	  it.
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -188,6 +191,13 @@ source "kernel/Kconfig.freezer"
 
 menu "System Type"
 
+config MMU
+	bool "MMU-based Paged Memory Management Support"
+	default y
+	help
+	  Select if you want MMU-based virtualised addressing space
+	  support by paged memory management. If unsure, say 'Y'.
+
 choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
@@ -203,6 +213,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ICST525
@@ -329,6 +340,20 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
+config ARCH_NOMADIK
+	bool "STMicroelectronics Nomadik"
+	select ARM_AMBA
+	select ARM_VIC
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Support for the Nomadik platform by ST-Ericsson
+
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -519,6 +544,7 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
@@ -561,6 +587,7 @@ config ARCH_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -573,6 +600,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -583,9 +611,18 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_HAS_CPUFREQ
 	help
 	  Samsung S3C64XX series based systems
 
+config ARCH_S5PC1XX
+	bool "Samsung S5PC1XX"
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select CPU_V7
+	help
+	  Samsung S5PC1XX series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -642,6 +679,7 @@ config ARCH_OMAP
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -707,6 +745,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -724,6 +763,10 @@ endif
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
@@ -738,6 +781,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/plat-mxc/Kconfig"
 
+source "arch/arm/mach-nomadik/Kconfig"
+
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
@@ -986,18 +1031,7 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
-config PREEMPT
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
+source kernel/Kconfig.preempt
 
 config HZ
 	int
@@ -1007,6 +1041,21 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config THUMB2_KERNEL
+	bool "Compile the kernel in Thumb-2 mode"
+	depends on CPU_V7 && EXPERIMENTAL
+	select AEABI
+	select ARM_ASM_UNIFIED
+	help
+	  By enabling this option, the kernel will be compiled in
+	  Thumb-2 mode. A compiler/assembler that understand the unified
+	  ARM-Thumb syntax is needed.
+
+	  If unsure, say N.
+
+config ARM_ASM_UNIFIED
+	bool
+
 config AEABI
 	bool "Use the ARM EABI to compile the kernel"
 	help
@@ -1270,7 +1319,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1305,6 +1354,52 @@ config CPU_FREQ_S3C64XX
 	bool "CPUfreq support for Samsung S3C64XX CPUs"
 	depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	select CPU_FREQ_S3C
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency"
+	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on CPU_FREQ_S3C24XX && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"
@@ -1406,107 +1501,7 @@ endmenu
 
 source "net/Kconfig"
 
-menu "Device Drivers"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
+source "drivers/Kconfig"
 
 source "fs/Kconfig"
 

arch/arm/Kconfig.debug

@@ -8,6 +8,7 @@ source "lib/Kconfig.debug"
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
 	bool
+	depends on !THUMB2_KERNEL
 	default y if !ARM_UNWIND
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and

arch/arm/Makefile

@@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+endif
+
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
+KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
@@ -136,8 +143,10 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2)		:= omap2
@@ -151,6 +160,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
@@ -159,6 +169,7 @@ machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
@@ -169,6 +180,7 @@ plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/boot/Makefile

@@ -61,7 +61,7 @@ endif
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-		   -C none -a $(LOADADDR) -e $(LOADADDR) \
+		   -C none -a $(LOADADDR) -e $(STARTADDR) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 ifeq ($(CONFIG_ZBOOT_ROM),y)
@@ -70,6 +70,13 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
+
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)
 	@echo '  Image $@ is ready'

arch/arm/boot/compressed/head.S

@@ -140,7 +140,8 @@ start:
 		tst	r2, #3			@ not user?
 		bne	not_angel
 		mov	r0, #0x17		@ angel_SWIreason_EnterSVC
-		swi	0x123456		@ angel_SWI_ARM
+ ARM(		swi	0x123456	)	@ angel_SWI_ARM
+ THUMB(		svc	0xab		)	@ angel_SWI_THUMB
 not_angel:
 		mrs	r2, cpsr		@ turn off interrupts to
 		orr	r2, r2, #0xc0		@ prevent angel from running
@@ -161,7 +162,9 @@ not_angel:
 
 		.text
 		adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}	)
+ THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip}	)
+ THUMB(		ldr	sp, [r0, #28]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -263,22 +266,25 @@ not_relocated:	mov	r0, #0
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		add	r1, r5, r0		@ end of decompressed kernel
 		adr	r2, reloc_start
 		ldr	r3, LC1
 		add	r3, r2, r3
-1:		ldmia	r2!, {r9 - r14}		@ copy relocation code
-		stmia	r1!, {r9 - r14}
-		ldmia	r2!, {r9 - r14}
-		stmia	r1!, {r9 - r14}
+1:		ldmia	r2!, {r9 - r12, r14}	@ copy relocation code
+		stmia	r1!, {r9 - r12, r14}
+		ldmia	r2!, {r9 - r12, r14}
+		stmia	r1!, {r9 - r12, r14}
 		cmp	r2, r3
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 
 		bl	cache_clean_flush
-		add	pc, r5, r0		@ call relocation code
+ ARM(		add	pc, r5, r0		) @ call relocation code
+ THUMB(		add	r12, r5, r0		)
+ THUMB(		mov	pc, r12			) @ call relocation code
 
 /*
  * We're not in danger of overwriting ourselves.  Do this the simple way.
@@ -291,6 +297,7 @@ wont_overwrite:	mov	r0, r4
 		bl	decompress_kernel
 		b	call_kernel
 
+		.align	2
 		.type	LC0, #object
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
@@ -431,6 +438,7 @@ ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -444,10 +452,12 @@ __armv4_mmu_cache_on:
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
 		tst	r11, #0xf		@ VMSA
 		blne	__setup_mmu
@@ -455,9 +465,11 @@ __armv7_mmu_cache_on:
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
 		tst	r11, #0xf		@ VMSA
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
@@ -465,6 +477,7 @@ __armv7_mmu_cache_on:
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+#endif
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
 		mov	r0, #0
@@ -498,6 +511,7 @@ __arm6_mmu_cache_on:
 		mov	pc, r12
 
 __common_mmu_cache_on:
+#ifndef CONFIG_THUMB2_KERNEL
 #ifndef DEBUG
 		orr	r0, r0, #0x000d		@ Write buffer, mmu
 #endif
@@ -509,6 +523,7 @@ __common_mmu_cache_on:
 1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
+#endif
 
 /*
  * All code following this line is relocatable.  It is relocated by
@@ -522,7 +537,7 @@ __common_mmu_cache_on:
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		.align	5
 reloc_start:	add	r9, r5, r0
@@ -531,13 +546,14 @@ reloc_start:	add	r9, r5, r0
 		mov	r1, r4
 1:
 		.rept	4
-		ldmia	r5!, {r0, r2, r3, r10 - r14}	@ relocate kernel
-		stmia	r1!, {r0, r2, r3, r10 - r14}
+		ldmia	r5!, {r0, r2, r3, r10 - r12, r14}	@ relocate kernel
+		stmia	r1!, {r0, r2, r3, r10 - r12, r14}
 		.endr
 
 		cmp	r5, r9
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 		debug_reloc_end
 
 call_kernel:	bl	cache_clean_flush
@@ -571,7 +587,9 @@ call_cache_fn:	adr	r12, proc_types
 		ldr	r2, [r12, #4]		@ get mask
 		eor	r1, r1, r6		@ (real ^ match)
 		tst	r1, r2			@       & mask
-		addeq	pc, r12, r3		@ call cache function
+ ARM(		addeq	pc, r12, r3		) @ call cache function
+ THUMB(		addeq	r12, r3			)
+ THUMB(		moveq	pc, r12			) @ call cache function
 		add	r12, r12, #4*5
 		b	1b
 
@@ -589,13 +607,15 @@ call_cache_fn:	adr	r12, proc_types
  * methods.  Writeback caches _must_ have the flush method
  * defined.
  */
+		.align	2
 		.type	proc_types,#object
 proc_types:
 		.word	0x41560600		@ ARM6/610
 		.word	0xffffffe0
-		b	__arm6_mmu_cache_off	@ works, but slow
-		b	__arm6_mmu_cache_off
+		W(b)	__arm6_mmu_cache_off	@ works, but slow
+		W(b)	__arm6_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 @		b	__arm6_mmu_cache_on		@ untested
 @		b	__arm6_mmu_cache_off
 @		b	__armv3_mmu_cache_flush
@@ -603,76 +623,84 @@ proc_types:
 		.word	0x00000000		@ old ARM ID
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007000		@ ARM7/710
 		.word	0xfff8fe00
-		b	__arm7_mmu_cache_off
-		b	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41807200		@ ARM720T (writethrough)
 		.word	0xffffff00
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007400		@ ARM74x
 		.word	0xff00ff00
-		b	__armv3_mpu_cache_on
-		b	__armv3_mpu_cache_off
-		b	__armv3_mpu_cache_flush
+		W(b)	__armv3_mpu_cache_on
+		W(b)	__armv3_mpu_cache_off
+		W(b)	__armv3_mpu_cache_flush
 		
 		.word	0x41009400		@ ARM94x
 		.word	0xff00ff00
-		b	__armv4_mpu_cache_on
-		b	__armv4_mpu_cache_off
-		b	__armv4_mpu_cache_flush
+		W(b)	__armv4_mpu_cache_on
+		W(b)	__armv4_mpu_cache_off
+		W(b)	__armv4_mpu_cache_flush
 
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		@ Everything from here on will be the new ID system.
 
 		.word	0x4401a100		@ sa110 / sa1100
 		.word	0xffffffe0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x6901b110		@ sa1110
 		.word	0xfffffff0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56158000		@ PXA168
 		.word	0xfffff000
-		b __armv4_mmu_cache_on
-		b __armv4_mmu_cache_off
-		b __armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
 		/* this conflicts with the standard ARMv5TE entry */
@@ -685,47 +713,50 @@ proc_types:
 
 		.word	0x66015261		@ FA526
 		.word	0xff01fff1
-		b	__fa526_cache_on
-		b	__armv4_mmu_cache_off
-		b	__fa526_cache_flush
+		W(b)	__fa526_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__fa526_cache_flush
 
 		@ These match on the architecture ID
 
 		.word	0x00020000		@ ARMv4T
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00050000		@ ARMv5TE
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00060000		@ ARMv5TEJ
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv6_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
 
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
-		b	__armv7_mmu_cache_on
-		b	__armv7_mmu_cache_off
-		b	__armv7_mmu_cache_flush
+		W(b)	__armv7_mmu_cache_on
+		W(b)	__armv7_mmu_cache_off
+		W(b)	__armv7_mmu_cache_flush
 
 		.word	0			@ unrecognised type
 		.word	0
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.size	proc_types, . - proc_types
 
@@ -760,22 +791,30 @@ __armv3_mpu_cache_off:
 		mov	pc, lr
 
 __armv4_mmu_cache_off:
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r0, c1, c0
 		bic	r0, r0, #0x000d
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c7	@ invalidate whole cache v4
 		mcr	p15, 0, r0, c8, c7	@ invalidate whole TLB v4
+#endif
 		mov	pc, lr
 
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
+#ifdef CONFIG_MMU
 		bic	r0, r0, #0x000d
+#else
+		bic	r0, r0, #0x000c
+#endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r12, lr
 		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
+#ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
+#endif
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
@@ -852,7 +891,7 @@ __armv7_mmu_cache_flush:
 		b	iflush
 hierarchical:
 		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r5, r7, r9, r11}
+		stmfd	sp!, {r0-r7, r9-r11}
 		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
 		ands	r3, r0, #0x7000000	@ extract loc from clidr
 		mov	r3, r3, lsr #23		@ left align loc bit field
@@ -877,8 +916,12 @@ loop1:
 loop2:
 		mov	r9, r4			@ create working copy of max way size
 loop3:
-		orr	r11, r10, r9, lsl r5	@ factor way and cache number into r11
-		orr	r11, r11, r7, lsl r2	@ factor index number into r11
+ ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
+ ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
+ THUMB(		lsl	r6, r9, r5		)
+ THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
+ THUMB(		lsl	r6, r7, r2		)
+ THUMB(		orr	r11, r11, r6		) @ factor index number into r11
 		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
 		subs	r9, r9, #1		@ decrement the way
 		bge	loop3
@@ -889,7 +932,7 @@ skip:
 		cmp	r3, r10
 		bgt	loop1
 finished:
-		ldmfd	sp!, {r0-r5, r7, r9, r11}
+		ldmfd	sp!, {r0-r7, r9-r11}
 		mov	r10, #0			@ swith back to cache level 0
 		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
 iflush:
@@ -923,9 +966,13 @@ __armv4_mmu_cache_flush:
 		mov	r11, #8
 		mov	r11, r11, lsl r3	@ cache line size in bytes
 no_cache_id:
-		bic	r1, pc, #63		@ align to longest cache line
+		mov	r1, pc
+		bic	r1, r1, #63		@ align to longest cache line
 		add	r2, r1, r2
-1:		ldr	r3, [r1], r11		@ s/w flush D cache
+1:
+ ARM(		ldr	r3, [r1], r11		) @ s/w flush D cache
+ THUMB(		ldr     r3, [r1]		) @ s/w flush D cache
+ THUMB(		add     r1, r1, r11		)
 		teq	r1, r2
 		bne	1b
 
@@ -945,6 +992,7 @@ __armv3_mpu_cache_flush:
  * memory, which again must be relocatable.
  */
 #ifdef DEBUG
+		.align	2
 		.type	phexbuf,#object
 phexbuf:	.space	12
 		.size	phexbuf, . - phexbuf

arch/arm/common/vic.c

@@ -22,10 +22,20 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
+static void vic_ack_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
 static void vic_mask_irq(unsigned int irq)
 {
 	void __iomem *base = get_irq_chip_data(irq);
@@ -253,12 +263,16 @@ static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg
 
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
-	.ack	= vic_mask_irq,
+	.ack	= vic_ack_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
 	.set_wake = vic_set_wake,
 };
 
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+			 u32 vic_sources);
+
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -270,6 +284,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
+	u32 cellid = 0;
+	enum amba_vendor vendor;
+
+	/* Identify which VIC cell this one is, by reading the ID */
+	for (i = 0; i < 4; i++) {
+		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+		cellid |= (readl(addr) & 0xff) << (8 * i);
+	}
+	vendor = (cellid >> 12) & 0xff;
+	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+	       base, cellid, vendor);
+
+	switch(vendor) {
+	case AMBA_VENDOR_ST:
+		vik_init_st(base, irq_start, vic_sources);
+		return;
+	default:
+		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+		/* fall through */
+	case AMBA_VENDOR_ARM:
+		break;
+	}
 
 	/* Disable all interrupts initially. */
 
@@ -306,3 +342,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_pm_register(base, irq_start, resume_sources);
 }
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+				u32 vic_sources)
+{
+	unsigned int i;
+	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+	/* Disable all interrupts initially. */
+
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_IRQ_STATUS);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+	/*
+	 * Make sure we clear all existing interrupts. The vector registers
+	 * in this cell are after the second block of general registers,
+	 * so we can address them using standard offsets, but only from
+	 * the second base address, which is 0x20 in the page
+	 */
+	if (vic_2nd_block) {
+		writel(0, base + VIC_PL190_VECT_ADDR);
+		for (i = 0; i < 19; i++) {
+			unsigned int value;
+
+			value = readl(base + VIC_PL190_VECT_ADDR);
+			writel(value, base + VIC_PL190_VECT_ADDR);
+		}
+		/* ST has 16 vectors as well, but we don't enable them by now */
+		for (i = 0; i < 16; i++) {
+			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+			writel(0, reg);
+		}
+
+		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	}
+
+	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}

arch/arm/configs/nhk8815_defconfig

@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Tue Jun 23 22:57:16 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_NOMADIK=y
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Nomadik boards
+#
+CONFIG_MACH_NOMADIK_8815NHK=y
+CONFIG_NOMADIK_8815=y
+CONFIG_I2C_BITBANG_8815NHK=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_TESTS=m
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/s5pc100_defconfig

@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul  1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y

arch/arm/configs/u300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Thu Jul  2 00:16:59 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -113,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBDAF=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -542,13 +541,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -911,7 +911,6 @@ CONFIG_REGULATOR=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
@@ -1122,7 +1121,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/include/asm/assembler.h

@@ -74,23 +74,56 @@
  * Enable and disable interrupts
  */
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	cpsid	i
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	cpsie	i
 	.endm
 #else
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	msr	cpsr_c, #SVC_MODE
 	.endm
 #endif
 
+	.macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl	trace_hardirqs_off
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	/*
+	 * actually the registers should be pushed and pop'd conditionally, but
+	 * after bl the flags are certainly clobbered
+	 */
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl\cond	trace_hardirqs_on
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on
+	asm_trace_hardirqs_on_cond al
+	.endm
+
+	.macro disable_irq
+	disable_irq_notrace
+	asm_trace_hardirqs_off
+	.endm
+
+	.macro enable_irq
+	asm_trace_hardirqs_on
+	enable_irq_notrace
+	.endm
 /*
  * Save the current IRQ state and disable IRQs.  Note that this macro
  * assumes FIQs are enabled, and that the processor is in SVC mode.
@@ -104,10 +137,16 @@
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
  */
-	.macro	restore_irqs, oldcpsr
+	.macro	restore_irqs_notrace, oldcpsr
 	msr	cpsr_c, \oldcpsr
 	.endm
 
+	.macro restore_irqs, oldcpsr
+	tst	\oldcpsr, #PSR_I_BIT
+	asm_trace_hardirqs_on_cond eq
+	restore_irqs_notrace \oldcpsr
+	.endm
+
 #define USER(x...)				\
 9999:	x;					\
 	.section __ex_table,"a";		\
@@ -127,3 +166,87 @@
 #endif
 #endif
 	.endm
+
+#ifdef CONFIG_THUMB2_KERNEL
+	.macro	setmode, mode, reg
+	mov	\reg, #\mode
+	msr	cpsr_c, \reg
+	.endm
+#else
+	.macro	setmode, mode, reg
+	msr	cpsr_c, #\mode
+	.endm
+#endif
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr, #\off]
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr, #\off]
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endm
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	@ explicit IT instruction needed because of the label
+	@ introduced by the USER macro
+	.ifnc	\cond,al
+	.if	\rept == 1
+	itt	\cond
+	.elseif	\rept == 2
+	ittt	\cond
+	.else
+	.error	"Unsupported rept macro argument"
+	.endif
+	.endif
+
+	@ Slightly optimised to avoid incrementing the pointer twice
+	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+	.if	\rept == 2
+	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	.endif
+
+	add\cond \ptr, #\rept * \inc
+	.endm
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	.rept	\rept
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr], #\inc
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr], #\inc
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endr
+	.endm
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+	.macro	strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	str, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
+
+	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm

arch/arm/include/asm/elf.h

@@ -55,6 +55,9 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_MOVW_ABS_NC	43
 #define R_ARM_MOVT_ABS		44
 
+#define R_ARM_THM_CALL		10
+#define R_ARM_THM_JUMP24	30
+
 /*
  * These are used to set parameters in the core dumps.
  */

arch/arm/include/asm/ftrace.h

@@ -7,6 +7,7 @@
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
+extern void __gnu_mcount_nc(void);
 #endif
 
 #endif

arch/arm/include/asm/futex.h

@@ -99,6 +99,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
 	"1:	ldrt	%0, [%3]\n"
 	"	teq	%0, %1\n"
+	"	it	eq	@ explicit IT needed for the 2b label\n"
 	"2:	streqt	%2, [%3]\n"
 	"3:\n"
 	"	.section __ex_table,\"a\"\n"

arch/arm/include/asm/memory.h

@@ -44,7 +44,13 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
+#ifndef CONFIG_THUMB2_KERNEL
 #define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
+#else
+/* smaller range for Thumb-2 symbols relocation (2^24)*/
+#define MODULES_VADDR		(PAGE_OFFSET - 8*1024*1024)
+#endif
+
 #if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif

arch/arm/include/asm/mmu_context.h

@@ -62,8 +62,10 @@ static inline void check_context(struct mm_struct *mm)
 
 static inline void check_context(struct mm_struct *mm)
 {
+#ifdef CONFIG_MMU
 	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
 		__check_kvm_seq(mm);
+#endif
 }
 
 #define init_new_context(tsk,mm)	0

arch/arm/include/asm/page-nommu.h

@@ -43,7 +43,4 @@ typedef unsigned long pgprot_t;
 #define __pmd(x)        (x)
 #define __pgprot(x)     (x)
 
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
 #endif

arch/arm/include/asm/ptrace.h

@@ -82,6 +82,14 @@
 #define PSR_ENDSTATE	0
 #endif
 
+/* 
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR		0x10000
+#define PT_DATA_ADDR		0x10004
+#define PT_TEXT_END_ADDR	0x10008
+
 #ifndef __ASSEMBLY__
 
 /*

arch/arm/include/asm/tlb.h

@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 

arch/arm/include/asm/uaccess.h

@@ -17,6 +17,7 @@
 #include <asm/memory.h>
 #include <asm/domain.h>
 #include <asm/system.h>
+#include <asm/unified.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -365,8 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
-	"2:	strt	" __reg_oper0 ", [%1]\n"		\
+ ARM(	"1:	strt	" __reg_oper1 ", [%1], #4\n"	)	\
+ ARM(	"2:	strt	" __reg_oper0 ", [%1]\n"	)	\
+ THUMB(	"1:	strt	" __reg_oper1 ", [%1]\n"	)	\
+ THUMB(	"2:	strt	" __reg_oper0 ", [%1, #4]\n"	)	\
 	"3:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\

arch/arm/include/asm/unified.h

@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNIFIED_H
+#define __ASM_UNIFIED_H
+
+#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+	.syntax unified
+#endif
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+#if __GNUC__ < 4
+#error Thumb-2 kernel requires gcc >= 4
+#endif
+
+/* The CPSR bit describing the instruction set (Thumb) */
+#define PSR_ISETSTATE	PSR_T_BIT
+
+#define ARM(x...)
+#define THUMB(x...)	x
+#define W(instr)	instr.w
+#define BSYM(sym)	sym + 1
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+/* The CPSR bit describing the instruction set (ARM) */
+#define PSR_ISETSTATE	0
+
+#define ARM(x...)	x
+#define THUMB(x...)
+#define W(instr)	instr
+#define BSYM(sym)	sym
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+#ifndef CONFIG_ARM_ASM_UNIFIED
+
+/*
+ * If the unified assembly syntax isn't used (in ARM mode), these
+ * macros expand to an empty string
+ */
+#ifdef __ASSEMBLY__
+	.macro	it, cond
+	.endm
+	.macro	itt, cond
+	.endm
+	.macro	ite, cond
+	.endm
+	.macro	ittt, cond
+	.endm
+	.macro	itte, cond
+	.endm
+	.macro	itet, cond
+	.endm
+	.macro	itee, cond
+	.endm
+	.macro	itttt, cond
+	.endm
+	.macro	ittte, cond
+	.endm
+	.macro	ittet, cond
+	.endm
+	.macro	ittee, cond
+	.endm
+	.macro	itett, cond
+	.endm
+	.macro	itete, cond
+	.endm
+	.macro	iteet, cond
+	.endm
+	.macro	iteee, cond
+	.endm
+#else	/* !__ASSEMBLY__ */
+__asm__(
+"	.macro	it, cond\n"
+"	.endm\n"
+"	.macro	itt, cond\n"
+"	.endm\n"
+"	.macro	ite, cond\n"
+"	.endm\n"
+"	.macro	ittt, cond\n"
+"	.endm\n"
+"	.macro	itte, cond\n"
+"	.endm\n"
+"	.macro	itet, cond\n"
+"	.endm\n"
+"	.macro	itee, cond\n"
+"	.endm\n"
+"	.macro	itttt, cond\n"
+"	.endm\n"
+"	.macro	ittte, cond\n"
+"	.endm\n"
+"	.macro	ittet, cond\n"
+"	.endm\n"
+"	.macro	ittee, cond\n"
+"	.endm\n"
+"	.macro	itett, cond\n"
+"	.endm\n"
+"	.macro	itete, cond\n"
+"	.endm\n"
+"	.macro	iteet, cond\n"
+"	.endm\n"
+"	.macro	iteee, cond\n"
+"	.endm\n");
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* CONFIG_ARM_ASM_UNIFIED */
+
+#endif	/* !__ASM_UNIFIED_H */

arch/arm/kernel/armksyms.c

@@ -186,4 +186,5 @@ EXPORT_SYMBOL(_find_next_bit_be);
 
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
+EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif

arch/arm/kernel/entry-armv.S

@@ -34,7 +34,7 @@
 	@
 	@ routine called with r0 = irq number, r1 = struct pt_regs *
 	@
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	asm_do_IRQ
 
 #ifdef CONFIG_SMP
@@ -46,13 +46,13 @@
 	 */
 	test_for_ipi r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_IPI
 
 #ifdef CONFIG_LOCAL_TIMERS
 	test_for_ltirq r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_local_timer
 #endif
 #endif
@@ -70,7 +70,10 @@
  */
 	.macro	inv_entry, reason
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - lr}
+ ARM(	stmib	sp, {r1 - lr}		)
+ THUMB(	stmia	sp, {r0 - r12}		)
+ THUMB(	str	sp, [sp, #S_SP]		)
+ THUMB(	str	lr, [sp, #S_LR]		)
 	mov	r1, #\reason
 	.endm
 
@@ -126,17 +129,24 @@ ENDPROC(__und_invalid)
 	.macro	svc_entry, stack_hole=0
  UNWIND(.fnstart		)
  UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole)
+	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+#ifdef CONFIG_THUMB2_KERNEL
+ SPFIX(	str	r0, [sp]	)	@ temporarily saved
+ SPFIX(	mov	r0, sp		)
+ SPFIX(	tst	r0, #4		)	@ test original stack alignment
+ SPFIX(	ldr	r0, [sp]	)	@ restored
+#else
  SPFIX(	tst	sp, #4		)
- SPFIX(	bicne	sp, sp, #4	)
-	stmib	sp, {r1 - r12}
+#endif
+ SPFIX(	subeq	sp, sp, #4	)
+	stmia	sp, {r1 - r12}
 
 	ldmia	r0, {r1 - r3}
-	add	r5, sp, #S_SP		@ here for interlock avoidance
+	add	r5, sp, #S_SP - 4	@ here for interlock avoidance
 	mov	r4, #-1			@  ""  ""      ""       ""
-	add	r0, sp, #(S_FRAME_SIZE + \stack_hole)
- SPFIX(	addne	r0, r0, #4	)
-	str	r1, [sp]		@ save the "real" r0 copied
+	add	r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX(	addeq	r0, r0, #4	)
+	str	r1, [sp, #-4]!		@ save the "real" r0 copied
 					@ from the exception stack
 
 	mov	r1, lr
@@ -151,6 +161,8 @@ ENDPROC(__und_invalid)
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -196,9 +208,8 @@ __dabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
 
@@ -206,9 +217,6 @@ ENDPROC(__dabt_svc)
 __irq_svc:
 	svc_entry
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -225,13 +233,12 @@ __irq_svc:
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
 #endif
-	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
-	msr	spsr_cxsf, r0
+	ldr	r4, [sp, #S_PSR]		@ irqs are already disabled
 #ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r0, #PSR_I_BIT
+	tst	r4, #PSR_I_BIT
 	bleq	trace_hardirqs_on
 #endif
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	svc_exit r4				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__irq_svc)
 
@@ -266,7 +273,7 @@ __und_svc:
 	@  r0 - instruction
 	@
 	ldr	r0, [r2, #-4]
-	adr	r9, 1f
+	adr	r9, BSYM(1f)
 	bl	call_fpe
 
 	mov	r0, sp				@ struct pt_regs *regs
@@ -280,9 +287,8 @@ __und_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
-	msr	spsr_cxsf, lr
-	ldmia	sp, {r0 - pc}^			@ Restore SVC registers
+	ldr	r2, [sp, #S_PSR]		@ Get SVC cpsr
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__und_svc)
 
@@ -323,9 +329,8 @@ __pabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__pabt_svc)
 
@@ -353,7 +358,8 @@ ENDPROC(__pabt_svc)
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)	@ don't unwind the user space
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - r12}
+ ARM(	stmib	sp, {r1 - r12}	)
+ THUMB(	stmia	sp, {r0 - r12}	)
 
 	ldmia	r0, {r1 - r3}
 	add	r0, sp, #S_PC		@ here for interlock avoidance
@@ -372,7 +378,8 @@ ENDPROC(__pabt_svc)
 	@ Also, separately save sp_usr and lr_usr
 	@
 	stmia	r0, {r2 - r4}
-	stmdb	r0, {sp, lr}^
+ ARM(	stmdb	r0, {sp, lr}^			)
+ THUMB(	store_user_sp_lr r0, r1, S_SP - S_PC	)
 
 	@
 	@ Enable the alignment trap while in kernel mode
@@ -383,6 +390,8 @@ ENDPROC(__pabt_svc)
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -427,7 +436,7 @@ __dabt_usr:
 	@
 	enable_irq
 	mov	r2, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_DataAbort
  UNWIND(.fnend		)
 ENDPROC(__dabt_usr)
@@ -437,9 +446,6 @@ __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -452,7 +458,9 @@ __irq_usr:
 	ldr	r0, [tsk, #TI_PREEMPT]
 	str	r8, [tsk, #TI_PREEMPT]
 	teq	r0, r7
-	strne	r0, [r0, -r0]
+ ARM(	strne	r0, [r0, -r0]	)
+ THUMB(	movne	r0, #0		)
+ THUMB(	strne	r0, [r0]	)
 #endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_on
@@ -476,9 +484,10 @@ __und_usr:
 	@
 	@  r0 - instruction
 	@
-	adr	r9, ret_from_exception
-	adr	lr, __und_usr_unknown
+	adr	r9, BSYM(ret_from_exception)
+	adr	lr, BSYM(__und_usr_unknown)
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
+	itet	eq				@ explicit IT needed for the 1f label
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
@@ -488,7 +497,10 @@ __und_usr:
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
-2:	ldrht	r5, [r4], #2
+2:
+ ARM(	ldrht	r5, [r4], #2	)
+ THUMB(	ldrht	r5, [r4]	)
+ THUMB(	add	r4, r4, #2	)
 	and	r0, r5, #0xf800			@ mask bits 111x x... .... ....
 	cmp	r0, #0xe800			@ 32bit instruction if xx != 0
 	blo	__und_usr_unknown
@@ -577,9 +589,11 @@ call_fpe:
 	moveq	pc, lr
 	get_thread_info r10			@ get current thread
 	and	r8, r0, #0x00000f00		@ mask out CP number
+ THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
 	add	r6, r10, #TI_USED_CP
-	strb	r7, [r6, r8, lsr #8]		@ set appropriate used_cp[]
+ ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
+ THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -587,36 +601,38 @@ call_fpe:
 	movcss	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
 	bcs	iwmmxt_task_enable
 #endif
-	add	pc, pc, r8, lsr #6
-	mov	r0, r0
-
-	mov	pc, lr				@ CP#0
-	b	do_fpe				@ CP#1 (FPE)
-	b	do_fpe				@ CP#2 (FPE)
-	mov	pc, lr				@ CP#3
+ ARM(	add	pc, pc, r8, lsr #6	)
+ THUMB(	lsl	r8, r8, #2		)
+ THUMB(	add	pc, r8			)
+	nop
+
+	W(mov)	pc, lr				@ CP#0
+	W(b)	do_fpe				@ CP#1 (FPE)
+	W(b)	do_fpe				@ CP#2 (FPE)
+	W(mov)	pc, lr				@ CP#3
 #ifdef CONFIG_CRUNCH
 	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
 #else
-	mov	pc, lr				@ CP#4
-	mov	pc, lr				@ CP#5
-	mov	pc, lr				@ CP#6
+	W(mov)	pc, lr				@ CP#4
+	W(mov)	pc, lr				@ CP#5
+	W(mov)	pc, lr				@ CP#6
 #endif
-	mov	pc, lr				@ CP#7
-	mov	pc, lr				@ CP#8
-	mov	pc, lr				@ CP#9
+	W(mov)	pc, lr				@ CP#7
+	W(mov)	pc, lr				@ CP#8
+	W(mov)	pc, lr				@ CP#9
 #ifdef CONFIG_VFP
-	b	do_vfp				@ CP#10 (VFP)
-	b	do_vfp				@ CP#11 (VFP)
+	W(b)	do_vfp				@ CP#10 (VFP)
+	W(b)	do_vfp				@ CP#11 (VFP)
 #else
-	mov	pc, lr				@ CP#10 (VFP)
-	mov	pc, lr				@ CP#11 (VFP)
+	W(mov)	pc, lr				@ CP#10 (VFP)
+	W(mov)	pc, lr				@ CP#11 (VFP)
 #endif
-	mov	pc, lr				@ CP#12
-	mov	pc, lr				@ CP#13
-	mov	pc, lr				@ CP#14 (Debug)
-	mov	pc, lr				@ CP#15 (Control)
+	W(mov)	pc, lr				@ CP#12
+	W(mov)	pc, lr				@ CP#13
+	W(mov)	pc, lr				@ CP#14 (Debug)
+	W(mov)	pc, lr				@ CP#15 (Control)
 
 #ifdef CONFIG_NEON
 	.align	6
@@ -667,7 +683,7 @@ no_fp:	mov	pc, lr
 __und_usr_unknown:
 	enable_irq
 	mov	r0, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_undefinstr
 ENDPROC(__und_usr_unknown)
 
@@ -711,7 +727,10 @@ ENTRY(__switch_to)
  UNWIND(.cantunwind	)
 	add	ip, r1, #TI_CPU_SAVE
 	ldr	r3, [r2, #TI_TP_VALUE]
-	stmia	ip!, {r4 - sl, fp, sp, lr}	@ Store most regs on stack
+ ARM(	stmia	ip!, {r4 - sl, fp, sp, lr} )	@ Store most regs on stack
+ THUMB(	stmia	ip!, {r4 - sl, fp}	   )	@ Store most regs on stack
+ THUMB(	str	sp, [ip], #4		   )
+ THUMB(	str	lr, [ip], #4		   )
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
@@ -736,8 +755,12 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
+ THUMB(	mov	ip, r4			   )
 	mov	r0, r5
-	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+ ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
+ THUMB(	ldmia	ip!, {r4 - sl, fp}	   )	@ Load all regs saved previously
+ THUMB(	ldr	sp, [ip], #4		   )
+ THUMB(	ldr	pc, [ip]		   )
  UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
@@ -772,6 +795,7 @@ ENDPROC(__switch_to)
  * if your compiled code is not going to use the new instructions for other
  * purpose.
  */
+ THUMB(	.arm	)
 
 	.macro	usr_ret, reg
 #ifdef CONFIG_ARM_THUMB
@@ -1020,6 +1044,7 @@ __kuser_helper_version:				@ 0xffff0ffc
 	.globl	__kuser_helper_end
 __kuser_helper_end:
 
+ THUMB(	.thumb	)
 
 /*
  * Vector stubs.
@@ -1054,17 +1079,23 @@ vector_\name:
 	@ Prepare for SVC32 mode.  IRQs remain disabled.
 	@
 	mrs	r0, cpsr
-	eor	r0, r0, #(\mode ^ SVC_MODE)
+	eor	r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
 	msr	spsr_cxsf, r0
 
 	@
 	@ the branch table must immediately follow this code
 	@
 	and	lr, lr, #0x0f
+ THUMB(	adr	r0, 1f			)
+ THUMB(	ldr	lr, [r0, lr, lsl #2]	)
 	mov	r0, sp
-	ldr	lr, [pc, lr, lsl #2]
+ ARM(	ldr	lr, [pc, lr, lsl #2]	)
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
+
+	.align	2
+	@ handler addresses follow this label
+1:
 	.endm
 
 	.globl	__stubs_start
@@ -1202,14 +1233,16 @@ __stubs_end:
 
 	.globl	__vectors_start
 __vectors_start:
-	swi	SYS_ERROR0
-	b	vector_und + stubs_offset
-	ldr	pc, .LCvswi + stubs_offset
-	b	vector_pabt + stubs_offset
-	b	vector_dabt + stubs_offset
-	b	vector_addrexcptn + stubs_offset
-	b	vector_irq + stubs_offset
-	b	vector_fiq + stubs_offset
+ ARM(	swi	SYS_ERROR0	)
+ THUMB(	svc	#0		)
+ THUMB(	nop			)
+	W(b)	vector_und + stubs_offset
+	W(ldr)	pc, .LCvswi + stubs_offset
+	W(b)	vector_pabt + stubs_offset
+	W(b)	vector_dabt + stubs_offset
+	W(b)	vector_addrexcptn + stubs_offset
+	W(b)	vector_irq + stubs_offset
+	W(b)	vector_fiq + stubs_offset
 
 	.globl	__vectors_end
 __vectors_end:

arch/arm/kernel/entry-common.S

@@ -33,14 +33,7 @@ ret_fast_syscall:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ fast_restore_user_regs
-	ldr	r1, [sp, #S_OFF + S_PSR]	@ get calling cpsr
-	ldr	lr, [sp, #S_OFF + S_PC]!	@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
 
 /*
@@ -73,14 +66,7 @@ no_work_pending:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ slow_restore_user_regs
-	ldr	r1, [sp, #S_PSR]		@ get calling cpsr
-	ldr	lr, [sp, #S_PC]!		@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 0, offset = 0
 ENDPROC(ret_to_user)
 
 /*
@@ -132,6 +118,25 @@ ftrace_call:
 
 #else
 
+ENTRY(__gnu_mcount_nc)
+	stmdb sp!, {r0-r3, lr}
+	ldr r0, =ftrace_trace_function
+	ldr r2, [r0]
+	adr r0, ftrace_stub
+	cmp r0, r2
+	bne gnu_trace
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
+gnu_trace:
+	ldr r1, [sp, #20]			@ lr of instrumented routine
+	mov r0, lr
+	sub r0, r0, #MCOUNT_INSN_SIZE
+	mov lr, pc
+	mov pc, r2
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
 	ldr r0, =ftrace_trace_function
@@ -182,8 +187,10 @@ ftrace_stub:
 ENTRY(vector_swi)
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
-	add	r8, sp, #S_PC
-	stmdb	r8, {sp, lr}^			@ Calling sp, lr
+ ARM(	add	r8, sp, #S_PC		)
+ ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
+ THUMB(	mov	r8, sp			)
+ THUMB(	store_user_sp_lr r8, r10, S_SP	)	@ calling sp, lr
 	mrs	r8, spsr			@ called from non-FIQ mode, so ok.
 	str	lr, [sp, #S_PC]			@ Save calling PC
 	str	r8, [sp, #S_PSR]		@ Save CPSR
@@ -272,7 +279,7 @@ ENTRY(vector_swi)
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
-	adr	lr, ret_fast_syscall		@ return address
+	adr	lr, BSYM(ret_fast_syscall)	@ return address
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
@@ -293,7 +300,7 @@ __sys_trace:
 	mov	r0, #0				@ trace entry [IP = 0]
 	bl	syscall_trace
 
-	adr	lr, __sys_trace_return		@ return address
+	adr	lr, BSYM(__sys_trace_return)	@ return address
 	mov	scno, r0			@ syscall number (possibly new)
 	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
 	cmp	scno, #NR_syscalls		@ check upper syscall limit

arch/arm/kernel/entry-header.S

@@ -36,11 +36,6 @@
 #endif
 	.endm
 
-	.macro	get_thread_info, rd
-	mov	\rd, sp, lsr #13
-	mov	\rd, \rd, lsl #13
-	.endm
-
 	.macro	alignment_trap, rtemp
 #ifdef CONFIG_ALIGNMENT_TRAP
 	ldr	\rtemp, .LCcralign
@@ -49,6 +44,93 @@
 #endif
 	.endm
 
+	@
+	@ Store/load the USER SP and LR registers by switching to the SYS
+	@ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
+	@ available. Should only be called from SVC mode
+	@
+	.macro	store_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	str	sp, [\rd, #\offset]		@ save sp_usr
+	str	lr, [\rd, #\offset + 4]		@ save lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+	.macro	load_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	ldr	sp, [\rd, #\offset]		@ load sp_usr
+	ldr	lr, [\rd, #\offset + 4]		@ load lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+#ifndef CONFIG_THUMB2_KERNEL
+	.macro	svc_exit, rpsr
+	msr	spsr_cxsf, \rpsr
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
+	.else
+	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_PC
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp, lsr #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#else	/* CONFIG_THUMB2_KERNEL */
+	.macro	svc_exit, rpsr
+	ldr	r0, [sp, #S_SP]			@ top of the stack
+	ldr	r1, [sp, #S_PC]			@ return address
+	tst	r0, #4				@ orig stack 8-byte aligned?
+	stmdb	r0, {r1, \rpsr}			@ rfe context
+	ldmia	sp, {r0 - r12}
+	ldr	lr, [sp, #S_LR]
+	addeq	sp, sp, #S_FRAME_SIZE - 8	@ aligned
+	addne	sp, sp, #S_FRAME_SIZE - 4	@ not aligned
+	rfeia	sp!
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	mov	r2, sp
+	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]	@ get pc
+	add	sp, sp, #\offset + S_SP
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
+	.else
+	ldmdb	sp, {r0 - r12}			@ get calling r0 - r12
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_SP
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp
+	lsr	\rd, \rd, #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#endif	/* !CONFIG_THUMB2_KERNEL */
 
 /*
  * These are the registers used in the syscall handler, and allow us to

arch/arm/kernel/head-common.S

@@ -14,6 +14,7 @@
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
 
+	.align	2
 	.type	__switch_data, %object
 __switch_data:
 	.long	__mmap_switched
@@ -51,7 +52,9 @@ __mmap_switched:
 	strcc	fp, [r6],#4
 	bcc	1b
 
-	ldmia	r3, {r4, r5, r6, r7, sp}
+ ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
+ THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
+ THUMB(	ldr	sp, [r3, #16]		)
 	str	r9, [r4]			@ Save processor ID
 	str	r1, [r5]			@ Save machine type
 	str	r2, [r6]			@ Save atags pointer
@@ -155,7 +158,8 @@ ENDPROC(__error)
  */
 __lookup_processor_type:
 	adr	r3, 3f
-	ldmda	r3, {r5 - r7}
+	ldmia	r3, {r5 - r7}
+	add	r3, r3, #8
 	sub	r3, r3, r7			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
 	add	r6, r6, r3			@ physical address space
@@ -185,9 +189,10 @@ ENDPROC(lookup_processor_type)
  * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
-	.long	__proc_info_begin
+	.align	2
+3:	.long	__proc_info_begin
 	.long	__proc_info_end
-3:	.long	.
+4:	.long	.
 	.long	__arch_info_begin
 	.long	__arch_info_end
 
@@ -203,7 +208,7 @@ ENDPROC(lookup_processor_type)
  *  r5 = mach_info pointer in physical address space
  */
 __lookup_machine_type:
-	adr	r3, 3b
+	adr	r3, 4b
 	ldmia	r3, {r4, r5, r6}
 	sub	r3, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to

arch/arm/kernel/head-nommu.S

@@ -34,7 +34,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 #ifndef CONFIG_CPU_CP15
 	ldr	r9, =CONFIG_PROCESSOR_ID
@@ -50,8 +50,10 @@ ENTRY(stext)
 
 	ldr	r13, __switch_data		@ address to jump to after
 						@ the initialization is done
-	adr	lr, __after_proc_init		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 /*
@@ -59,7 +61,10 @@ ENDPROC(stext)
  */
 __after_proc_init:
 #ifdef CONFIG_CPU_CP15
-	mrc	p15, 0, r0, c1, c0, 0		@ read control reg
+	/*
+	 * CP15 system control register value returned in r0 from
+	 * the CPU init function.
+	 */
 #ifdef CONFIG_ALIGNMENT_TRAP
 	orr	r0, r0, #CR_A
 #else
@@ -82,7 +87,8 @@ __after_proc_init:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 #endif /* CONFIG_CPU_CP15 */
 
-	mov	pc, r13				@ clear the BSS and jump
+	mov	r3, r13
+	mov	pc, r3				@ clear the BSS and jump
 						@ to start_kernel
 ENDPROC(__after_proc_init)
 	.ltorg

arch/arm/kernel/head.S

@@ -76,7 +76,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
@@ -97,8 +97,10 @@ ENTRY(stext)
 	 */
 	ldr	r13, __switch_data		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, __enable_mmu		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__enable_mmu)		@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 #if defined(CONFIG_SMP)
@@ -110,7 +112,7 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?
@@ -121,12 +123,15 @@ ENTRY(secondary_startup)
 	 * Use the page tables supplied from  __cpu_up.
 	 */
 	adr	r4, __secondary_data
-	ldmia	r4, {r5, r7, r13}		@ address to jump to after
+	ldmia	r4, {r5, r7, r12}		@ address to jump to after
 	sub	r4, r4, r5			@ mmu has been enabled
 	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
-	adr	lr, __enable_mmu		@ return address
-	add	pc, r10, #PROCINFO_INITFUNC	@ initialise processor
-						@ (return control reg)
+	adr	lr, BSYM(__enable_mmu)		@ return address
+	mov	r13, r12			@ __secondary_switched address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
+						  @ (return control reg)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(secondary_startup)
 
 	/*
@@ -193,8 +198,8 @@ __turn_mmu_on:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
 	mov	r3, r3
-	mov	r3, r3
-	mov	pc, r13
+	mov	r3, r13
+	mov	pc, r3
 ENDPROC(__turn_mmu_on)
 
 
@@ -235,7 +240,8 @@ __create_page_tables:
 	 * will be removed by paging_init().  We use our current program
 	 * counter to determine corresponding section base address.
 	 */
-	mov	r6, pc, lsr #20			@ start of kernel section
+	mov	r6, pc
+	mov	r6, r6, lsr #20			@ start of kernel section
 	orr	r3, r7, r6, lsl #20		@ flags + kernel base
 	str	r3, [r4, r6, lsl #2]		@ identity mapping
 

arch/arm/kernel/irq.c

@@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v)
 unlock:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
 #endif
 #ifdef CONFIG_SMP

arch/arm/kernel/module.c

@@ -102,6 +102,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		s32 offset;
+		u32 upper, lower, sign, j1, j2;
 
 		offset = ELF32_R_SYM(rel->r_info);
 		if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -184,6 +185,58 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 					(offset & 0x0fff);
 			break;
 
+		case R_ARM_THM_CALL:
+		case R_ARM_THM_JUMP24:
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+
+			/*
+			 * 25 bit signed address range (Thumb-2 BL and B.W
+			 * instructions):
+			 *   S:I1:I2:imm10:imm11:0
+			 * where:
+			 *   S     = upper[10]   = offset[24]
+			 *   I1    = ~(J1 ^ S)   = offset[23]
+			 *   I2    = ~(J2 ^ S)   = offset[22]
+			 *   imm10 = upper[9:0]  = offset[21:12]
+			 *   imm11 = lower[10:0] = offset[11:1]
+			 *   J1    = lower[13]
+			 *   J2    = lower[11]
+			 */
+			sign = (upper >> 10) & 1;
+			j1 = (lower >> 13) & 1;
+			j2 = (lower >> 11) & 1;
+			offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
+				((~(j2 ^ sign) & 1) << 22) |
+				((upper & 0x03ff) << 12) |
+				((lower & 0x07ff) << 1);
+			if (offset & 0x01000000)
+				offset -= 0x02000000;
+			offset += sym->st_value - loc;
+
+			/* only Thumb addresses allowed (no interworking) */
+			if (!(offset & 1) ||
+			    offset <= (s32)0xff000000 ||
+			    offset >= (s32)0x01000000) {
+				printk(KERN_ERR
+				       "%s: relocation out of range, section "
+				       "%d reloc %d sym '%s'\n", module->name,
+				       relindex, i, strtab + sym->st_name);
+				return -ENOEXEC;
+			}
+
+			sign = (offset >> 24) & 1;
+			j1 = sign ^ (~(offset >> 23) & 1);
+			j2 = sign ^ (~(offset >> 22) & 1);
+			*(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+					    ((offset >> 12) & 0x03ff));
+			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
+						  (j1 << 13) | (j2 << 11) |
+						  ((offset >> 1) & 0x07ff));
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));

arch/arm/kernel/process.c

@@ -388,7 +388,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }

arch/arm/kernel/ptrace.c

@@ -521,7 +521,13 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 		return -EIO;
 
 	tmp = 0;
-	if (off < sizeof(struct pt_regs))
+	if (off == PT_TEXT_ADDR)
+		tmp = tsk->mm->start_code;
+	else if (off == PT_DATA_ADDR)
+		tmp = tsk->mm->start_data;
+	else if (off == PT_TEXT_END_ADDR)
+		tmp = tsk->mm->end_code;
+	else if (off < sizeof(struct pt_regs))
 		tmp = get_user_reg(tsk, off >> 2);
 
 	return put_user(tmp, ret);

arch/arm/kernel/setup.c

@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/fs.h>
 
+#include <asm/unified.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/elf.h>
@@ -326,26 +327,39 @@ void cpu_init(void)
 		BUG();
 	}
 
+	/*
+	 * Define the placement constraint for the inline asm directive below.
+	 * In Thumb-2, msr with an immediate value is not allowed.
+	 */
+#ifdef CONFIG_THUMB2_KERNEL
+#define PLC	"r"
+#else
+#define PLC	"I"
+#endif
+
 	/*
 	 * setup stacks for re-entrant exception handlers
 	 */
 	__asm__ (
 	"msr	cpsr_c, %1\n\t"
-	"add	sp, %0, %2\n\t"
+	"add	r14, %0, %2\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %3\n\t"
-	"add	sp, %0, %4\n\t"
+	"add	r14, %0, %4\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %5\n\t"
-	"add	sp, %0, %6\n\t"
+	"add	r14, %0, %6\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %7"
 	    :
 	    : "r" (stk),
-	      "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
 	      "I" (offsetof(struct stack, irq[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
 	      "I" (offsetof(struct stack, abt[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
 	    : "r14");
 }
 

arch/arm/kernel/unwind.c

@@ -62,7 +62,11 @@ struct unwind_ctrl_block {
 };
 
 enum regs {
+#ifdef CONFIG_THUMB2_KERNEL
+	FP = 7,
+#else
 	FP = 11,
+#endif
 	SP = 13,
 	LR = 14,
 	PC = 15

arch/arm/lib/ashldi3.S

@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsl)
 	rsb	ip, r2, #32
 	movmi	ah, ah, lsl r2
 	movpl	ah, al, lsl r3
-	orrmi	ah, ah, al, lsr ip
+ ARM(	orrmi	ah, ah, al, lsr ip	)
+ THUMB(	lsrmi	r3, al, ip		)
+ THUMB(	orrmi	ah, ah, r3		)
 	mov	al, al, lsl r2
 	mov	pc, lr
 

arch/arm/lib/ashrdi3.S

@@ -43,7 +43,9 @@ ENTRY(__aeabi_lasr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, asr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, asr r2
 	mov	pc, lr
 

arch/arm/lib/backtrace.S

@@ -38,7 +38,9 @@ ENDPROC(c_backtrace)
 		beq	no_frame		@ we have no stack frames
 
 		tst	r1, #0x10		@ 26 or 32-bit mode?
-		moveq	mask, #0xfc000003	@ mask for 26-bit
+ ARM(		moveq	mask, #0xfc000003	)
+ THUMB(		moveq	mask, #0xfc000000	)
+ THUMB(		orreq	mask, #0x03		)
 		movne	mask, #0		@ mask for 32-bit
 
 1:		stmfd	sp!, {pc}		@ calculate offset of PC stored
@@ -126,7 +128,9 @@ ENDPROC(c_backtrace)
 		mov	reg, #10
 		mov	r7, #0
 1:		mov	r3, #1
-		tst	instr, r3, lsl reg
+ ARM(		tst	instr, r3, lsl reg	)
+ THUMB(		lsl	r3, reg			)
+ THUMB(		tst	instr, r3		)
 		beq	2f
 		add	r7, r7, #1
 		teq	r7, #6

arch/arm/lib/bitops.h

@@ -60,8 +60,8 @@
 	tst	r2, r0, lsl r3
 	\instr	r2, r2, r0, lsl r3
 	\store	r2, [r1]
-	restore_irqs ip
 	moveq	r0, #0
+	restore_irqs ip
 	mov	pc, lr
 	.endm
 #endif

arch/arm/lib/clear_user.S

@@ -27,21 +27,20 @@ WEAK(__clear_user)
 		ands	ip, r0, #3
 		beq	1f
 		cmp	ip, #2
-USER(		strbt	r2, [r0], #1)
-USER(		strlebt	r2, [r0], #1)
-USER(		strltbt	r2, [r0], #1)
+		strusr	r2, r0, 1
+		strusr	r2, r0, 1, le
+		strusr	r2, r0, 1, lt
 		rsb	ip, ip, #4
 		sub	r1, r1, ip		@  7  6  5  4  3  2  1
 1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
-USER(		strplt	r2, [r0], #4)
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl, rept=2
 		bpl	1b
 		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl
 2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
-USER(		strnebt	r2, [r0], #1)
-USER(		strnebt	r2, [r0], #1)
+		strusr	r2, r0, 1, ne, rept=2
 		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
+		it	ne			@ explicit IT needed for the label
 USER(		strnebt	r2, [r0])
 		mov	r0, #0
 		ldmfd	sp!, {r1, pc}

arch/arm/lib/copy_from_user.S

@@ -33,11 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#ifndef CONFIG_THUMB2_KERNEL
+#define LDR1W_SHIFT	0
+#else
+#define LDR1W_SHIFT	1
+#endif
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-100:	ldrt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -53,14 +57,11 @@
 	.endm
 
 	.macro ldr1b ptr reg cond=al abort
-100:	ldr\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort

arch/arm/lib/copy_template.S

@@ -57,6 +57,13 @@
  *
  *	Restore registers with the values previously saved with the
  *	'preserv' macro. Called upon code termination.
+ *
+ * LDR1W_SHIFT
+ * STR1W_SHIFT
+ *
+ *	Correction to be applied to the "ip" register when branching into
+ *	the ldr1w or str1w instructions (some of these macros may expand to
+ *	than one 32bit instruction in Thumb-2)
  */
 
 
@@ -99,9 +106,15 @@
 
 5:		ands	ip, r2, #28
 		rsb	ip, ip, #32
+#if LDR1W_SHIFT > 0
+		lsl	ip, ip, #LDR1W_SHIFT
+#endif
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:
+		.rept	(1 << LDR1W_SHIFT)
+		W(nop)
+		.endr
 		ldr1w	r1, r3, abort=20f
 		ldr1w	r1, r4, abort=20f
 		ldr1w	r1, r5, abort=20f
@@ -110,9 +123,16 @@
 		ldr1w	r1, r8, abort=20f
 		ldr1w	r1, lr, abort=20f
 
+#if LDR1W_SHIFT < STR1W_SHIFT
+		lsl	ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
+#elif LDR1W_SHIFT > STR1W_SHIFT
+		lsr	ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
+#endif
 		add	pc, pc, ip
 		nop
-		nop
+		.rept	(1 << STR1W_SHIFT)
+		W(nop)
+		.endr
 		str1w	r0, r3, abort=20f
 		str1w	r0, r4, abort=20f
 		str1w	r0, r5, abort=20f

arch/arm/lib/copy_to_user.S

@@ -33,8 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#define LDR1W_SHIFT	0
+#ifndef CONFIG_THUMB2_KERNEL
+#define STR1W_SHIFT	0
+#else
+#define STR1W_SHIFT	1
+#endif
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -50,10 +57,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-100:	strt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
@@ -68,10 +72,7 @@
 	.endm
 
 	.macro str1b ptr reg cond=al abort
-100:	str\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro enter reg1 reg2

arch/arm/lib/csumpartialcopyuser.S

@@ -26,50 +26,28 @@
 		.endm
 
 		.macro	load1b,	reg1
-9999:		ldrbt	\reg1, [r0], $1
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
 		.endm
 
 		.macro	load2b, reg1, reg2
-9999:		ldrbt	\reg1, [r0], $1
-9998:		ldrbt	\reg2, [r0], $1
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
+		ldrusr	\reg2, r0, 1
 		.endm
 
 		.macro	load1l, reg1
-9999:		ldrt	\reg1, [r0], $4
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
 		.endm
 
 		.macro	load2l, reg1, reg2
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
 		.endm
 
 		.macro	load4l, reg1, reg2, reg3, reg4
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-9997:		ldrt	\reg3, [r0], $4
-9996:		ldrt	\reg4, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.long	9997b, 6001f
-		.long	9996b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
+		ldrusr	\reg3, r0, 4
+		ldrusr	\reg4, r0, 4
 		.endm
 
 /*
@@ -92,14 +70,14 @@
  */
 		.section .fixup,"ax"
 		.align	4
-6001:		mov	r4, #-EFAULT
+9001:		mov	r4, #-EFAULT
 		ldr	r5, [fp, #4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1
 		mov	r0, #0			@ zero the buffer
-6002:		teq	r2, r1
+9002:		teq	r2, r1
 		strneb	r0, [r1], #1
-		bne	6002b
+		bne	9002b
 		load_regs
 		.previous

arch/arm/lib/div64.S

@@ -177,7 +177,9 @@ ENTRY(__do_div64)
 	mov	yh, xh, lsr ip
 	mov	yl, xl, lsr ip
 	rsb	ip, ip, #32
-	orr	yl, yl, xh, lsl ip
+ ARM(	orr	yl, yl, xh, lsl ip	)
+ THUMB(	lsl	xh, xh, ip		)
+ THUMB(	orr	yl, yl, xh		)
 	mov	xh, xl, lsl ip
 	mov	xh, xh, lsr ip
 	mov	pc, lr

arch/arm/lib/findbit.S

@@ -25,7 +25,10 @@ ENTRY(_find_first_zero_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -44,7 +47,9 @@ ENTRY(_find_next_zero_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -61,7 +66,10 @@ ENTRY(_find_first_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -80,7 +88,9 @@ ENTRY(_find_next_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
@@ -95,7 +105,9 @@ ENTRY(_find_first_zero_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -111,7 +123,9 @@ ENTRY(_find_next_zero_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -125,7 +139,9 @@ ENTRY(_find_first_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -141,7 +157,9 @@ ENTRY(_find_next_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here

arch/arm/lib/getuser.S

@@ -36,8 +36,13 @@ ENTRY(__get_user_1)
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
+#ifdef CONFIG_THUMB2_KERNEL
+2:	ldrbt	r2, [r0]
+3:	ldrbt	r3, [r0, #1]
+#else
 2:	ldrbt	r2, [r0], #1
 3:	ldrbt	r3, [r0]
+#endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
 #else

arch/arm/lib/io-writesw-armv4.S

@@ -75,7 +75,10 @@ ENTRY(__raw_writesw)
 #endif
 
 .Loutsw_noalign:
-		ldr	r3, [r1, -r3]!
+ ARM(		ldr	r3, [r1, -r3]!	)
+ THUMB(		rsb	r3, r3, #0	)
+ THUMB(		ldr	r3, [r1, r3]	)
+ THUMB(		sub	r1, r3		)
 		subcs	r2, r2, #1
 		bcs	2f
 		subs	r2, r2, #2

arch/arm/lib/lshrdi3.S

@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, lsr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, lsr r2
 	mov	pc, lr
 

arch/arm/lib/memcpy.S

@@ -13,8 +13,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#define LDR1W_SHIFT	0
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -30,7 +33,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort

arch/arm/lib/memmove.S

@@ -75,24 +75,24 @@ ENTRY(memmove)
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
 6:		nop
-		ldr	r3, [r1, #-4]!
-		ldr	r4, [r1, #-4]!
-		ldr	r5, [r1, #-4]!
-		ldr	r6, [r1, #-4]!
-		ldr	r7, [r1, #-4]!
-		ldr	r8, [r1, #-4]!
-		ldr	lr, [r1, #-4]!
+		W(ldr)	r3, [r1, #-4]!
+		W(ldr)	r4, [r1, #-4]!
+		W(ldr)	r5, [r1, #-4]!
+		W(ldr)	r6, [r1, #-4]!
+		W(ldr)	r7, [r1, #-4]!
+		W(ldr)	r8, [r1, #-4]!
+		W(ldr)	lr, [r1, #-4]!
 
 		add	pc, pc, ip
 		nop
 		nop
-		str	r3, [r0, #-4]!
-		str	r4, [r0, #-4]!
-		str	r5, [r0, #-4]!
-		str	r6, [r0, #-4]!
-		str	r7, [r0, #-4]!
-		str	r8, [r0, #-4]!
-		str	lr, [r0, #-4]!
+		W(str)	r3, [r0, #-4]!
+		W(str)	r4, [r0, #-4]!
+		W(str)	r5, [r0, #-4]!
+		W(str)	r6, [r0, #-4]!
+		W(str)	r7, [r0, #-4]!
+		W(str)	r8, [r0, #-4]!
+		W(str)	lr, [r0, #-4]!
 
 	CALGN(	bcs	2b			)
 

arch/arm/lib/putuser.S

@@ -37,6 +37,15 @@ ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
+#ifdef CONFIG_THUMB2_KERNEL
+#ifndef __ARMEB__
+2:	strbt	r2, [r0]
+3:	strbt	ip, [r0, #1]
+#else
+2:	strbt	ip, [r0]
+3:	strbt	r2, [r0, #1]
+#endif
+#else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
 2:	strbt	r2, [r0], #1
 3:	strbt	ip, [r0]
@@ -44,6 +53,7 @@ ENTRY(__put_user_2)
 2:	strbt	ip, [r0], #1
 3:	strbt	r2, [r0]
 #endif
+#endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_2)
@@ -55,8 +65,13 @@ ENTRY(__put_user_4)
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+#ifdef CONFIG_THUMB2_KERNEL
+5:	strt	r2, [r0]
+6:	strt	r3, [r0, #4]
+#else
 5:	strt	r2, [r0], #4
 6:	strt	r3, [r0]
+#endif
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_8)

arch/arm/lib/sha1.S

@@ -187,6 +187,7 @@ ENTRY(sha_transform)
 
 ENDPROC(sha_transform)
 
+	.align	2
 .L_sha_K:
 	.word	0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
 
@@ -195,6 +196,7 @@ ENDPROC(sha_transform)
  * void sha_init(__u32 *buf)
  */
 
+	.align	2
 .L_sha_initial_digest:
 	.word	0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
 

arch/arm/lib/strncpy_from_user.S

@@ -23,7 +23,7 @@
 ENTRY(__strncpy_from_user)
 	mov	ip, r1
 1:	subs	r2, r2, #1
-USER(	ldrplbt	r3, [r1], #1)
+	ldrusr	r3, r1, 1, pl
 	bmi	2f
 	strb	r3, [r0], #1
 	teq	r3, #0

arch/arm/lib/strnlen_user.S

@@ -23,7 +23,7 @@
 ENTRY(__strnlen_user)
 	mov	r2, r0
 1:
-USER(	ldrbt	r3, [r0], #1)
+	ldrusr	r3, r0, 1
 	teq	r3, #0
 	beq	2f
 	subs	r1, r1, #1

arch/arm/mach-at91/include/mach/at_hdmac.h

@@ -0,0 +1,102 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+	AT_DMA_SLAVE_WIDTH_8BIT = 0,
+	AT_DMA_SLAVE_WIDTH_16BIT,
+	AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum at_dma_slave_width	reg_width;
+	u32			cfg;
+	u32			ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
+
+#endif /* AT_HDMAC_H */

arch/arm/mach-ep93xx/dma-m2p.c

@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>

arch/arm/mach-integrator/include/mach/hardware.h

@@ -36,8 +36,12 @@
 #define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
+#ifdef CONFIG_MMU
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+#else
+#define IO_ADDRESS(x) (x)
+#endif
 
 #define pcibios_assign_all_busses()	1
 

arch/arm/mach-integrator/integrator_cp.c

@@ -49,14 +49,14 @@
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		0xf1000040
-#define INTCP_VA_PIC_BASE		0xf1400000
-#define INTCP_VA_SIC_BASE		0xfca00000
+#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_PIC_BASE		IO_ADDRESS(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE		IO_ADDRESS(0xca000000)
 
 #define INTCP_PA_ETH_BASE		0xc8000000
 #define INTCP_ETH_SIZE			0x10
 
-#define INTCP_VA_CTRL_BASE		0xfcb00000
+#define INTCP_VA_CTRL_BASE		IO_ADDRESS(0xcb000000)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -121,12 +121,12 @@ static struct map_desc intcp_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfca00000,
+		.virtual	= IO_ADDRESS(0xca000000),
 		.pfn		= __phys_to_pfn(0xca000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfcb00000,
+		.virtual	= IO_ADDRESS(0xcb000000),
 		.pfn		= __phys_to_pfn(0xcb000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
@@ -394,8 +394,8 @@ static struct platform_device *intcp_devs[] __initdata = {
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(0xfca00004);
-	writel(8, 0xfcb00008);
+	unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
+	writel(8, IO_ADDRESS(0xcb000000) + 8);
 
 	return status & 8;
 }

arch/arm/mach-kirkwood/Kconfig

@@ -38,6 +38,12 @@ config MACH_TS219
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-119 and TS-219 Turbo NAS devices.
 
+config MACH_OPENRD_BASE
+	bool "Marvell OpenRD Base Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Base Board.
+
 endmenu
 
 endif

arch/arm/mach-kirkwood/Makefile

@@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o

arch/arm/mach-kirkwood/common.c

@@ -838,7 +838,8 @@ int __init kirkwood_find_tclk(void)
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+	if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+					rev == MV88F6281_REV_A1))
 		return 200000000;
 
 	return 166666667;
@@ -872,6 +873,8 @@ static char * __init kirkwood_id(void)
 			return "MV88F6281-Z0";
 		else if (rev == MV88F6281_REV_A0)
 			return "MV88F6281-A0";
+		else if (rev == MV88F6281_REV_A1)
+			return "MV88F6281-A1";
 		else
 			return "MV88F6281-Rev-Unsupported";
 	} else if (dev == MV88F6192_DEV_ID) {

arch/arm/mach-kirkwood/include/mach/kirkwood.h

@@ -101,6 +101,7 @@
 #define MV88F6281_DEV_ID	0x6281
 #define MV88F6281_REV_Z0	0
 #define MV88F6281_REV_A0	2
+#define MV88F6281_REV_A1	3
 
 #define MV88F6192_DEV_ID	0x6192
 #define MV88F6192_REV_Z0	0

arch/arm/mach-kirkwood/mpp.h

@@ -289,7 +289,7 @@
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )

arch/arm/mach-kirkwood/openrd_base-setup.c

@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-kirkwood/openrd_base-setup.c
+ *
+ * Marvell OpenRD Base Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_base_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data openrd_base_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mvsdio_platform_data openrd_base_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_base_mpp_config[] __initdata = {
+	MPP29_GPIO,
+	0
+};
+
+static void __init openrd_base_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_base_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&openrd_base_ge00_data);
+	kirkwood_sata_init(&openrd_base_sata_data);
+	kirkwood_sdio_init(&openrd_base_mvsdio_data);
+}
+
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_base_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END

arch/arm/mach-mx1/clock.c

@@ -18,11 +18,14 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/list.h>
 #include <linux/math64.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
+
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -94,7 +97,6 @@ static unsigned long clk16m_get_rate(struct clk *clk)
 }
 
 static struct clk clk16m = {
-	.name = "CLK16M",
 	.get_rate = clk16m_get_rate,
 	.enable = _clk_enable,
 	.enable_reg = CCM_CSCR,
@@ -111,7 +113,6 @@ static unsigned long clk32_get_rate(struct clk *clk)
 }
 
 static struct clk clk32 = {
-	.name = "CLK32",
 	.get_rate = clk32_get_rate,
 };
 
@@ -121,7 +122,6 @@ static unsigned long clk32_premult_get_rate(struct clk *clk)
 }
 
 static struct clk clk32_premult = {
-	.name = "CLK32_premultiplier",
 	.parent = &clk32,
 	.get_rate = clk32_premult_get_rate,
 };
@@ -156,7 +156,6 @@ static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk prem_clk = {
-	.name = "prem_clk",
 	.set_parent = prem_clk_set_parent,
 };
 
@@ -167,7 +166,6 @@ static unsigned long system_clk_get_rate(struct clk *clk)
 }
 
 static struct clk system_clk = {
-	.name = "system_clk",
 	.parent = &prem_clk,
 	.get_rate = system_clk_get_rate,
 };
@@ -179,7 +177,6 @@ static unsigned long mcu_clk_get_rate(struct clk *clk)
 }
 
 static struct clk mcu_clk = {
-	.name = "mcu_clk",
 	.parent = &clk32_premult,
 	.get_rate = mcu_clk_get_rate,
 };
@@ -195,7 +192,6 @@ static unsigned long fclk_get_rate(struct clk *clk)
 }
 
 static struct clk fclk = {
-	.name = "fclk",
 	.parent = &mcu_clk,
 	.get_rate = fclk_get_rate,
 };
@@ -238,7 +234,6 @@ static int hclk_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk hclk = {
-	.name = "hclk",
 	.parent = &system_clk,
 	.get_rate = hclk_get_rate,
 	.round_rate = hclk_round_rate,
@@ -280,7 +275,6 @@ static int clk48m_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk clk48m = {
-	.name = "CLK48M",
 	.parent = &system_clk,
 	.get_rate = clk48m_get_rate,
 	.round_rate = clk48m_round_rate,
@@ -400,21 +394,18 @@ static int perclk3_set_rate(struct clk *clk, unsigned long rate)
 
 static struct clk perclk[] = {
 	{
-		.name = "perclk",
 		.id = 0,
 		.parent = &system_clk,
 		.get_rate = perclk1_get_rate,
 		.round_rate = perclk1_round_rate,
 		.set_rate = perclk1_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 1,
 		.parent = &system_clk,
 		.get_rate = perclk2_get_rate,
 		.round_rate = perclk2_round_rate,
 		.set_rate = perclk2_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 2,
 		.parent = &system_clk,
 		.get_rate = perclk3_get_rate,
@@ -457,12 +448,10 @@ static int clko_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk clko_clk = {
-	.name = "clko_clk",
 	.set_parent = clko_set_parent,
 };
 
 static struct clk dma_clk = {
-	.name = "dma",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -473,7 +462,6 @@ static struct clk dma_clk = {
 };
 
 static struct clk csi_clk = {
-	.name = "csi_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -484,7 +472,6 @@ static struct clk csi_clk = {
 };
 
 static struct clk mma_clk = {
-	.name = "mma_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -495,7 +482,6 @@ static struct clk mma_clk = {
 };
 
 static struct clk usbd_clk = {
-	.name = "usbd_clk",
 	.parent = &clk48m,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -506,99 +492,85 @@ static struct clk usbd_clk = {
 };
 
 static struct clk gpt_clk = {
-	.name = "gpt_clk",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk uart_clk = {
-	.name = "uart",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk i2c_clk = {
-	.name = "i2c_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk spi_clk = {
-	.name = "spi_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk sdhc_clk = {
-	.name = "sdhc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk lcdc_clk = {
-	.name = "lcdc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk mshc_clk = {
-	.name = "mshc_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk ssi_clk = {
-	.name = "ssi_clk",
 	.parent = &perclk[2],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk rtc_clk = {
-	.name = "rtc_clk",
 	.parent = &clk32,
 };
 
-static struct clk *mxc_clks[] = {
-	&clk16m,
-	&clk32,
-	&clk32_premult,
-	&prem_clk,
-	&system_clk,
-	&mcu_clk,
-	&fclk,
-	&hclk,
-	&clk48m,
-	&perclk[0],
-	&perclk[1],
-	&perclk[2],
-	&clko_clk,
-	&dma_clk,
-	&csi_clk,
-	&mma_clk,
-	&usbd_clk,
-	&gpt_clk,
-	&uart_clk,
-	&i2c_clk,
-	&spi_clk,
-	&sdhc_clk,
-	&lcdc_clk,
-	&mshc_clk,
-	&ssi_clk,
-	&rtc_clk,
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "mma", mma_clk)
+	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
 };
 
 int __init mx1_clocks_init(unsigned long fref)
 {
-	struct clk **clkp;
 	unsigned int reg;
+	int i;
 
 	/* disable clocks we are able to */
 	__raw_writel(0, SCM_GCCR);
@@ -620,13 +592,13 @@ int __init mx1_clocks_init(unsigned long fref)
 	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
 	clko_clk.parent = (struct clk *)clko_clocks[reg];
 
-	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-		clk_register(*clkp);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
-	mxc_timer_init(&gpt_clk);
+	mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
 
 	return 0;
 }

arch/arm/mach-mx1/devices.c

@@ -29,12 +29,11 @@
 #include "devices.h"
 
 static struct resource imx_csi_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00224000,
 		.end    = 0x00224010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = CSI_INT,
 		.end    = CSI_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -55,12 +54,11 @@ struct platform_device imx_csi_device = {
 };
 
 static struct resource imx_i2c_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00217000,
 		.end    = 0x00217010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = I2C_INT,
 		.end    = I2C_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -75,22 +73,19 @@ struct platform_device imx_i2c_device = {
 };
 
 static struct resource imx_uart1_resources[] = {
-	[0] = {
+	{
 		.start	= UART1_BASE_ADDR,
 		.end	= UART1_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART1_MINT_RX,
 		.end	= UART1_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART1_MINT_TX,
 		.end	= UART1_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART1_MINT_RTS,
 		.end	= UART1_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -105,22 +100,19 @@ struct platform_device imx_uart1_device = {
 };
 
 static struct resource imx_uart2_resources[] = {
-	[0] = {
+	{
 		.start	= UART2_BASE_ADDR,
 		.end	= UART2_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART2_MINT_RX,
 		.end	= UART2_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART2_MINT_TX,
 		.end	= UART2_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART2_MINT_RTS,
 		.end	= UART2_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -135,17 +127,15 @@ struct platform_device imx_uart2_device = {
 };
 
 static struct resource imx_rtc_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00204000,
 		.end    = 0x00204024,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = RTC_INT,
 		.end    = RTC_INT,
 		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start  = RTC_SAMINT,
 		.end    = RTC_SAMINT,
 		.flags  = IORESOURCE_IRQ,
@@ -160,12 +150,11 @@ struct platform_device imx_rtc_device = {
 };
 
 static struct resource imx_wdt_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00201000,
 		.end    = 0x00201008,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = WDT_INT,
 		.end    = WDT_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -180,42 +169,35 @@ struct platform_device imx_wdt_device = {
 };
 
 static struct resource imx_usb_resources[] = {
-	[0] = {
+	{
 		.start	= 0x00212000,
 		.end	= 0x00212148,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= USBD_INT0,
 		.end	= USBD_INT0,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= USBD_INT1,
 		.end	= USBD_INT1,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= USBD_INT2,
 		.end	= USBD_INT2,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
+	}, {
 		.start	= USBD_INT3,
 		.end	= USBD_INT3,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[5] = {
+	}, {
 		.start	= USBD_INT4,
 		.end	= USBD_INT4,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[6] = {
+	}, {
 		.start	= USBD_INT5,
 		.end	= USBD_INT5,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[7] = {
+	}, {
 		.start	= USBD_INT6,
 		.end	= USBD_INT6,
 		.flags	= IORESOURCE_IRQ,
@@ -231,29 +213,26 @@ struct platform_device imx_usb_device = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
 		.irq = GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START
-	},
-	[1] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
 		.chip.label = "gpio-1",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.irq = GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32
-	},
-	[2] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
 		.chip.label = "gpio-2",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.irq = GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64
-	},
-	[3] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
 		.chip.label = "gpio-3",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.irq = GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	}
 };
 

arch/arm/mach-mx1/generic.c

@@ -41,6 +41,13 @@ static struct map_desc imx_io_desc[] __initdata = {
 void __init mx1_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
+	mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
+
+void __init mx1_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+

arch/arm/mach-mx1/mx1ads.c

@@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = {
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("pcf857x", 0x22),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x22),
 		.platform_data = &pcf857x_data[0],
 	}, {
-		I2C_BOARD_INFO("pcf857x", 0x24),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x24),
 		.platform_data = &pcf857x_data[1],
 	},
 };
@@ -151,7 +149,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END
@@ -161,7 +159,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END

arch/arm/mach-mx1/scb9328.c

@@ -68,22 +68,20 @@ static struct dm9000_plat_data dm9000_platdata = {
  * to gain access to address latch registers and the data path.
  */
 static struct resource dm9000x_resources[] = {
-	[0] = {
+	{
 		.name	= "address area",
 		.start	= IMX_CS5_PHYS,
 		.end	= IMX_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM	/* address access */
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,	/* address access */
+	}, {
 		.name	= "data area",
 		.start	= IMX_CS5_PHYS + 4,
 		.end	= IMX_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM	/* data access */
-	},
-	[2] = {
+		.flags	= IORESOURCE_MEM,	/* data access */
+	}, {
 		.start	= IRQ_GPIOC(3),
 		.end	= IRQ_GPIOC(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
@@ -154,7 +152,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &scb9328_timer,
 	.init_machine	= scb9328_init,
 MACHINE_END

arch/arm/mach-mx2/Kconfig

@@ -53,6 +53,34 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_EUKREA_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	depends on MACH_MX27
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_EUKREA_CPUIMX27
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27 used
+	  for wifi or eMMC.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	prompt "Eukrea MBIMX27 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
@@ -67,4 +95,11 @@ config MACH_MX27LITE
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	depends on MACH_MX27
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif

arch/arm/mach-mx2/Makefile

@@ -17,4 +17,7 @@ obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += pca100.o
 

arch/arm/mach-mx2/clock_imx21.c

@@ -1004,6 +1004,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0]);
+	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 	return 0;
 }

arch/arm/mach-mx2/clock_imx27.c

@@ -643,7 +643,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
 	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
@@ -748,7 +755,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk);
+	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 
 	return 0;
 }

arch/arm/mach-mx2/devices.c

@@ -40,45 +40,87 @@
 #include "devices.h"
 
 /*
- * Resource definition for the MXC IrDA
+ * SPI master controller
+ *
+ * - i.MX1: 2 channel (slighly different register setting)
+ * - i.MX21: 2 channel
+ * - i.MX27: 3 channel
  */
-static struct resource mxc_irda_resources[] = {
-	[0] = {
-		.start   = UART3_BASE_ADDR,
-		.end     = UART3_BASE_ADDR + SZ_4K - 1,
-		.flags   = IORESOURCE_MEM,
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
 	},
-	[1] = {
-		.start   = MXC_INT_UART3,
-		.end     = MXC_INT_UART3,
-		.flags   = IORESOURCE_IRQ,
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
 	},
 };
 
-/* Platform Data for MXC IrDA */
-struct platform_device mxc_irda_device = {
-	.name = "mxc_irda",
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_spi_resources2[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+#endif
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_irda_resources),
-	.resource = mxc_irda_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+#ifdef CONFIG_MACH_MX27
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
 };
+#endif
 
 /*
  * General Purpose Timer
- * - i.MX1: 2 timer (slighly different register handling)
- * - i.MX21: 3 timer
- * - i.MX27: 6 timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
  */
 
 /* We use gpt0 as system timer, so do not add a device for this one */
 
 static struct resource timer1_resources[] = {
-	[0] = {
+	{
 		.start	= GPT2_BASE_ADDR,
 		.end	= GPT2_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT2,
 		.end     = MXC_INT_GPT2,
 		.flags   = IORESOURCE_IRQ,
@@ -89,16 +131,15 @@ struct platform_device mxc_gpt1 = {
 	.name = "imx_gpt",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(timer1_resources),
-	.resource = timer1_resources
+	.resource = timer1_resources,
 };
 
 static struct resource timer2_resources[] = {
-	[0] = {
+	{
 		.start	= GPT3_BASE_ADDR,
 		.end	= GPT3_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT3,
 		.end     = MXC_INT_GPT3,
 		.flags   = IORESOURCE_IRQ,
@@ -109,17 +150,16 @@ struct platform_device mxc_gpt2 = {
 	.name = "imx_gpt",
 	.id = 2,
 	.num_resources = ARRAY_SIZE(timer2_resources),
-	.resource = timer2_resources
+	.resource = timer2_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource timer3_resources[] = {
-	[0] = {
+	{
 		.start	= GPT4_BASE_ADDR,
 		.end	= GPT4_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT4,
 		.end     = MXC_INT_GPT4,
 		.flags   = IORESOURCE_IRQ,
@@ -130,16 +170,15 @@ struct platform_device mxc_gpt3 = {
 	.name = "imx_gpt",
 	.id = 3,
 	.num_resources = ARRAY_SIZE(timer3_resources),
-	.resource = timer3_resources
+	.resource = timer3_resources,
 };
 
 static struct resource timer4_resources[] = {
-	[0] = {
+	{
 		.start	= GPT5_BASE_ADDR,
 		.end	= GPT5_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT5,
 		.end     = MXC_INT_GPT5,
 		.flags   = IORESOURCE_IRQ,
@@ -150,16 +189,15 @@ struct platform_device mxc_gpt4 = {
 	.name = "imx_gpt",
 	.id = 4,
 	.num_resources = ARRAY_SIZE(timer4_resources),
-	.resource = timer4_resources
+	.resource = timer4_resources,
 };
 
 static struct resource timer5_resources[] = {
-	[0] = {
+	{
 		.start	= GPT6_BASE_ADDR,
 		.end	= GPT6_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT6,
 		.end     = MXC_INT_GPT6,
 		.flags   = IORESOURCE_IRQ,
@@ -170,7 +208,7 @@ struct platform_device mxc_gpt5 = {
 	.name = "imx_gpt",
 	.id = 5,
 	.num_resources = ARRAY_SIZE(timer5_resources),
-	.resource = timer5_resources
+	.resource = timer5_resources,
 };
 #endif
 
@@ -214,11 +252,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= NFC_BASE_ADDR,
 		.end	= NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -240,8 +278,7 @@ static struct resource mxc_fb[] = {
 		.start = LCDC_BASE_ADDR,
 		.end   = LCDC_BASE_ADDR + 0xFFF,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_LCDC,
 		.end   = MXC_INT_LCDC,
 		.flags = IORESOURCE_IRQ,
@@ -264,11 +301,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= FEC_BASE_ADDR,
 		.end	= FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -281,15 +318,14 @@ struct platform_device mxc_fec_device = {
 #endif
 
 static struct resource mxc_i2c_1_resources[] = {
-	[0] = {
+	{
 		.start	= I2C_BASE_ADDR,
 		.end	= I2C_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C,
 		.end	= MXC_INT_I2C,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -297,20 +333,19 @@ struct platform_device mxc_i2c_device0 = {
 	.name = "imx-i2c",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources
+	.resource = mxc_i2c_1_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_i2c_2_resources[] = {
-	[0] = {
+	{
 		.start	= I2C2_BASE_ADDR,
 		.end	= I2C2_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C2,
 		.end	= MXC_INT_I2C2,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -318,17 +353,16 @@ struct platform_device mxc_i2c_device1 = {
 	.name = "imx-i2c",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources
+	.resource = mxc_i2c_2_resources,
 };
 #endif
 
 static struct resource mxc_pwm_resources[] = {
-	[0] = {
+	{
 		.start	= PWM_BASE_ADDR,
 		.end	= PWM_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_PWM,
 		.end     = MXC_INT_PWM,
 		.flags   = IORESOURCE_IRQ,
@@ -339,28 +373,26 @@ struct platform_device mxc_pwm_device = {
 	.name = "mxc_pwm",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources
+	.resource = mxc_pwm_resources,
 };
 
 /*
  * Resource definition for the MXC SDHC
  */
 static struct resource mxc_sdhc1_resources[] = {
-	[0] = {
-			.start = SDHC1_BASE_ADDR,
-			.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC1,
-			.end   = MXC_INT_SDHC1,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC1,
-			.end    = DMA_REQ_SDHC1,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC1_BASE_ADDR,
+		.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC1,
+		.end   = MXC_INT_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC1,
+		.end    = DMA_REQ_SDHC1,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
@@ -377,21 +409,19 @@ struct platform_device mxc_sdhc_device0 = {
 };
 
 static struct resource mxc_sdhc2_resources[] = {
-	[0] = {
-			.start = SDHC2_BASE_ADDR,
-			.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC2,
-			.end   = MXC_INT_SDHC2,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC2,
-			.end    = DMA_REQ_SDHC2,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC2_BASE_ADDR,
+		.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC2,
+		.end   = MXC_INT_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC2,
+		.end    = DMA_REQ_SDHC2,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
@@ -407,35 +437,123 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+#ifdef CONFIG_MACH_MX27
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = 0xffffffffUL;
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+#endif
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
 		.base = IO_ADDRESS(GPIO_BASE_ADDR),
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	},
-	[3] = {
+	}, {
 		.chip.label = "gpio-3",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	},
-	[4] = {
+	}, {
 		.chip.label = "gpio-4",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	},
-	[5] = {
+	}, {
 		.chip.label = "gpio-5",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,

arch/arm/mach-mx2/devices.h

@@ -4,7 +4,6 @@ extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_irda_device;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
 extern struct platform_device mxc_uart_device2;
@@ -20,3 +19,11 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+

arch/arm/mach-mx2/eukrea_cpuimx27.c

@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+	/* in which case UART4 is also used for Bluetooth */
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END

arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c

@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+	{
+		.name			= "backlight",
+		.default_trigger	= "backlight",
+		.active_low		= 0,
+		.gpio			= GPIO_PORTE | 5,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QGVA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		.irq		= IRQ_GPIOD(25),
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+	&leds_gpio,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+
+	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, NULL);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* SPI and ADS7846 Touchscreen controler init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+	ads7846_dev_init();
+#endif
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}

arch/arm/mach-mx2/generic.c

@@ -72,6 +72,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx21_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -79,7 +80,18 @@ void __init mx21_map_io(void)
 void __init mx27_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx27_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx21_init_irq(void)
+{
+	mx27_init_irq();
+}
+

arch/arm/mach-mx2/mx21ads.c

@@ -164,25 +164,33 @@ static void mx21ads_fb_exit(struct platform_device *pdev)
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DB02
  */
-static struct imx_fb_platform_data mx21ads_fb_data = {
-	.pixclock       = 188679, /* in ps */
-	.xres           = 240,
-	.yres           = 320,
-
-	.bpp            = 16,
-	.hsync_len      = 2,
-	.left_margin    = 6,
-	.right_margin   = 16,
+static struct imx_fb_videomode mx21ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 2,
+			.left_margin	= 6,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 8,
+			.lower_margin	= 10,
+		},
+		.pcr		= 0xfb108bc7,
+		.bpp		= 16,
+	},
+};
 
-	.vsync_len      = 1,
-	.upper_margin   = 8,
-	.lower_margin   = 10,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx21ads_fb_data = {
+	.mode = mx21ads_modes,
+	.num_modes = ARRAY_SIZE(mx21ads_modes),
 
-	.pcr            = 0xFB108BC7,
-	.pwmr           = 0x00A901ff,
-	.lscr1          = 0x00120300,
-	.dmacr          = 0x00020008,
+	.pwmr		= 0x00a903ff,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020008,
 
 	.init = mx21ads_fb_init,
 	.exit = mx21ads_fb_exit,
@@ -280,7 +288,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx21_init_irq,
 	.init_machine   = mx21ads_board_init,
 	.timer          = &mx21ads_timer,
 MACHINE_END

arch/arm/mach-mx2/mx27ads.c

@@ -183,20 +183,29 @@ void lcd_power(int on)
 		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static struct imx_fb_platform_data mx27ads_fb_data = {
-	.pixclock	= 188679,
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 9,
-	.right_margin	= 16,
+static struct imx_fb_videomode mx27ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 1,
+			.left_margin	= 9,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFB008BC0,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.mode = mx27ads_modes,
+	.num_modes = ARRAY_SIZE(mx27ads_modes),
 
 	/*
 	 * - HSYNC active high
@@ -207,7 +216,6 @@ static struct imx_fb_platform_data mx27ads_fb_data = {
 	 * - data enable low active
 	 * - enable sharp mode
 	 */
-	.pcr		= 0xFB008BC0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
@@ -330,7 +338,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END

arch/arm/mach-mx2/mx27lite.c

@@ -89,7 +89,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27lite_init,
 	.timer          = &mx27lite_timer,
 MACHINE_END

arch/arm/mach-mx2/mx27pdk.c

@@ -89,7 +89,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27pdk_init,
 	.timer          = &mx27pdk_timer,
 MACHINE_END

arch/arm/mach-mx2/pca100.c

@@ -0,0 +1,244 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* onboard I2C */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* external I2C */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+	.name		= "at25320an",
+	.byte_len	= 4096,
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+	{
+		.modalias = "at25",
+		.max_speed_hz = 30000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &at25320,
+	},
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+	.chipselect	= pca100_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "imx-mmc-detect", data);
+	if (ret)
+		printk(KERN_ERR
+			"pca100: Failed to reuest irq for sd/mmc detection\n");
+
+	return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pca100_sdhc2_init,
+	.exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+			ARRAY_SIZE(pca100_pins), "PCA100");
+	if (ret)
+		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pca100_i2c_devices,
+				ARRAY_SIZE(pca100_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+	/* GPIO0_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+	/* GPIO1_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+	/* GPIO2_IRQ */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	spi_register_board_info(pca100_spi_board_info,
+				ARRAY_SIZE(pca100_spi_board_info));
+	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+	.init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = pca100_init,
+	.timer          = &pca100_timer,
+MACHINE_END
+