Merge branch 'next/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (35 commits)
  ARM: msm: platsmp: determine number of CPU cores at boot time
  ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461
  ARM: Tegra: Trimslice: Tri-state DAP3 pinmux
  ARM: orion5x: fixup 5181 MPP mask check
  ARM: mxs-dma: include <linux/dmaengine.h>
  ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/cts
  ARM: i.MX53: UARTn_CTS pin should not change RTS input select
  ARM: i.MX53: UARTn_TXD pin should not change RXD input select
  ARM: mx25: Fix typo on CAN1_RX pad setting
  iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitions
  ARM: NUC93X: add UL suffix to VMALLOC_END to ensure it is properly typed
  ARM: LPC32XXX: add UL suffix to VMALLOC_END to ensure it is properly typed
  ARM: CNS3XXX: add UL suffix to VMALLOC_END to ensure it is properly typed
  ARM: i.MX53: Fix IOMUX type o's
  ARM i.MX dma: Fix burstsize settings
  mach-mx5: fix the I2C clock parents
  ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0
  ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h
  ARM: mx53: Fix some interrupts marked as reserved.
  MXC: iomux-v3: correct NO_PAD_CTRL definition
  ...

Fix up trivial conflict in arch/arm/mach-imx/mach-mx31_3ds.c

arch/arm/configs/mx51_defconfig

@@ -106,6 +106,7 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_SDHCI=m
@@ -145,7 +146,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y

arch/arm/configs/mxs_defconfig

@@ -89,7 +89,7 @@ CONFIG_DISPLAY_SUPPORT=m
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_MXS=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y

arch/arm/mach-cns3xxx/include/mach/vmalloc.h

@@ -8,4 +8,4 @@
  * published by the Free Software Foundation.
  */
 
-#define VMALLOC_END		0xd8000000
+#define VMALLOC_END		0xd8000000UL

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -42,10 +42,11 @@
 
 #include "devices-imx27.h"
 
-#define SD1_EN_GPIO (GPIO_PORTB + 25)
-#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
-#define SPI2_SS0 (GPIO_PORTD + 21)
-#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTC + 28)
+#define SD1_EN_GPIO		IMX_GPIO_NR(2, 25)
+#define OTG_PHY_RESET_GPIO	IMX_GPIO_NR(2, 23)
+#define SPI2_SS0		IMX_GPIO_NR(4, 21)
+#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(3, 28))
+#define PMIC_INT		IMX_GPIO_NR(3, 14)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -98,9 +99,12 @@ static const int mx27pdk_pins[] __initconst = {
 	PD22_PF_CSPI2_SCLK,
 	PD23_PF_CSPI2_MISO,
 	PD24_PF_CSPI2_MOSI,
+	SPI2_SS0 | GPIO_GPIO | GPIO_OUT,
 	/* I2C1 */
 	PD17_PF_I2C_DATA,
 	PD18_PF_I2C_CLK,
+	/* PMIC INT */
+	PMIC_INT | GPIO_GPIO | GPIO_IN,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -193,6 +197,13 @@ static int __init mx27_3ds_otg_mode(char *options)
 __setup("otg_mode=", mx27_3ds_otg_mode);
 
 /* Regulators */
+static struct regulator_init_data gpo_init = {
+	.constraints = {
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
 static struct regulator_consumer_supply vmmc1_consumers[] = {
 	REGULATOR_SUPPLY("lcd_2v8", NULL),
 };
@@ -201,7 +212,9 @@ static struct regulator_init_data vmmc1_init = {
 	.constraints = {
 		.min_uV	= 2800000,
 		.max_uV = 2800000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
 	.consumer_supplies = vmmc1_consumers,
@@ -228,6 +241,12 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
 	}, {
 		.id = MC13783_REG_VGEN,
 		.init_data = &vgen_init,
+	}, {
+		.id = MC13783_REG_GPO1, /* Turn on 1.8V */
+		.init_data = &gpo_init,
+	}, {
+		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
+		.init_data = &gpo_init,
 	},
 };
 

arch/arm/mach-imx/mach-mx31_3ds.c

@@ -54,11 +54,8 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_RXD1__RXD1,
 	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
 	/*SPI0*/
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
+	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
 	/* SPI 1 */
 	MX31_PIN_CSPI2_SCLK__SCLK,
 	MX31_PIN_CSPI2_MOSI__MOSI,
@@ -692,6 +689,9 @@ static void __init mx31_3ds_init(void)
 
 	imx31_soc_init();
 
+	/* Configure SPI1 IOMUX */
+	mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
+
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 

arch/arm/mach-lpc32xx/include/mach/vmalloc.h

@@ -19,6 +19,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	0xF0000000
+#define VMALLOC_END	0xF0000000UL
 
 #endif

arch/arm/mach-msm/platsmp.c

@@ -18,6 +18,7 @@
 
 #include <asm/hardware/gic.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 #include <asm/mach-types.h>
 
 #include <mach/msm_iomap.h>
@@ -40,6 +41,12 @@ volatile int pen_release = -1;
 
 static DEFINE_SPINLOCK(boot_lock);
 
+static inline int get_core_count(void)
+{
+	/* 1 + the PART[1:0] field of MIDR */
+	return ((read_cpuid_id() >> 4) & 3) + 1;
+}
+
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/* Configure edge-triggered PPIs */
@@ -147,9 +154,9 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i;
+	unsigned int i, ncores = get_core_count();
 
-	for (i = 0; i < NR_CPUS; i++)
+	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
 
         set_smp_cross_call(gic_raise_softirq);

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1274,9 +1274,9 @@ DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
 	NULL, NULL, &ipg_clk, NULL);
 

arch/arm/mach-mxs/devices/platform-mxsfb.c

@@ -5,6 +5,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
+#include <linux/dma-mapping.h>
 #include <asm/sizes.h>
 #include <mach/mx23.h>
 #include <mach/mx28.h>

arch/arm/mach-mxs/include/mach/dma.h

@@ -9,6 +9,8 @@
 #ifndef __MACH_MXS_DMA_H__
 #define __MACH_MXS_DMA_H__
 
+#include <linux/dmaengine.h>
+
 struct mxs_dma_data {
 	int chan_irq;
 };

arch/arm/mach-mxs/mach-tx28.c

@@ -101,14 +101,6 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
 		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 	MX28_PAD_SSP0_DATA3__SSP0_D3 |
 		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 	MX28_PAD_SSP0_CMD__SSP0_CMD |
 		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |

arch/arm/mach-nuc93x/include/mach/vmalloc.h

@@ -18,6 +18,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	  0xE0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-orion5x/mpp.c

@@ -24,7 +24,7 @@ static unsigned int __init orion5x_variant(void)
 
 	orion5x_pcie_id(&dev, &rev);
 
-	if (dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0)
+	if (dev == MV88F5181_DEV_ID)
 		return MPP_F5181_MASK;
 
 	if (dev == MV88F5182_DEV_ID)

arch/arm/mach-tegra/board-seaboard.c

@@ -159,7 +159,7 @@ static void __init seaboard_i2c_init(void)
 
 	i2c_register_board_info(0, &isl29018_device, 1);
 
-	i2c_register_board_info(4, &adt7461_device, 1);
+	i2c_register_board_info(3, &adt7461_device, 1);
 
 	tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data;
 	tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data;

arch/arm/mach-tegra/board-trimslice-pinmux.c

@@ -35,7 +35,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
 	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},

arch/arm/plat-mxc/devices/platform-imx-dma.c

@@ -33,22 +33,22 @@ struct imx_imx_sdma_data {
 
 #ifdef CONFIG_SOC_IMX25
 struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
-	imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0);
+	imx_imx_sdma_data_entry_single(MX25, 2, "imx25", 1);
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX31
 struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
-	imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0);
+	imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 1);
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
 struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
-	imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0);
+	imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 1);
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_SOC_IMX51
 struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
-	imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0);
+	imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1);
 #endif /* ifdef CONFIG_SOC_IMX51 */
 
 static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
@@ -57,7 +57,7 @@ static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
 	struct resource res[] = {
 		{
 			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
+			.end = data->iobase + SZ_16K - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
 			.start = data->irq,
@@ -77,7 +77,7 @@ static struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
 }
 
 #ifdef CONFIG_ARCH_MX25
-static struct sdma_script_start_addrs addr_imx25_to1 = {
+static struct sdma_script_start_addrs addr_imx25 = {
 	.ap_2_ap_addr = 729,
 	.uart_2_mcu_addr = 904,
 	.per_2_app_addr = 1255,
@@ -165,7 +165,7 @@ static int __init imxXX_add_imx_dma(void)
 
 #if defined(CONFIG_SOC_IMX25)
 	if (cpu_is_mx25()) {
-		imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25_to1;
+		imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25;
 		ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
 	} else
 #endif

arch/arm/plat-mxc/devices/platform-imx-ssi.c

@@ -69,7 +69,7 @@ const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
 #define imx51_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
 	imx51_imx_ssi_data_entry(0, 1),
 	imx51_imx_ssi_data_entry(1, 2),
 	imx51_imx_ssi_data_entry(2, 3),

arch/arm/plat-mxc/include/mach/iomux-mx25.h

@@ -457,7 +457,7 @@
 #define MX25_PAD_GPIO_A__USBOTG_PWR	IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
 
 #define MX25_PAD_GPIO_B__GPIO_B		IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K)
+#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP)
 #define MX25_PAD_GPIO_B__USBOTG_OC	IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
 
 #define MX25_PAD_GPIO_C__GPIO_C		IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)

arch/arm/plat-mxc/include/mach/iomux-mx53.h

@@ -39,10 +39,10 @@
 #define _MX53_PAD_GPIO_19__ECSPI1_RDY	IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_19__FEC_TDATA_3	IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_19__SRC_INT_BOOT	IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__KPP_COL_0	IOMUX_PAD(0x34C, 0x24, o, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL0__KPP_COL_0	IOMUX_PAD(0x34C, 0x24, 0, 0x0, 0, 0)
 #define _MX53_PAD_KEY_COL0__GPIO4_6		IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0)
 #define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0)
-#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX	IOMUX_PAD(0x34C, 0x24, 4, 0x890, 0, 0)
+#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX	IOMUX_PAD(0x34C, 0x24, 4, 0x0, 0, 0)
 #define _MX53_PAD_KEY_COL0__ECSPI1_SCLK	IOMUX_PAD(0x34C, 0x24, 5, 0x79C, 0, 0)
 #define _MX53_PAD_KEY_COL0__FEC_RDATA_3	IOMUX_PAD(0x34C, 0x24, 6, 0x0, 0, 0)
 #define _MX53_PAD_KEY_COL0__SRC_ANY_PU_RST	IOMUX_PAD(0x34C, 0x24, 7, 0x0, 0, 0)
@@ -55,7 +55,7 @@
 #define _MX53_PAD_KEY_COL1__KPP_COL_1	IOMUX_PAD(0x354, 0x2C, 0, 0x0, 0, 0)
 #define _MX53_PAD_KEY_COL1__GPIO4_8		IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, 0)
 #define _MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	IOMUX_PAD(0x354, 0x2C, 2, 0x75C, 0, 0)
-#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX	IOMUX_PAD(0x354, 0x2C, 4, 0x898, 0, 0)
+#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX	IOMUX_PAD(0x354, 0x2C, 4, 0x0, 0, 0)
 #define _MX53_PAD_KEY_COL1__ECSPI1_MISO	IOMUX_PAD(0x354, 0x2C, 5, 0x7A0, 0, 0)
 #define _MX53_PAD_KEY_COL1__FEC_RX_CLK	IOMUX_PAD(0x354, 0x2C, 6, 0x808, 0, 0)
 #define _MX53_PAD_KEY_COL1__USBPHY1_TXREADY	IOMUX_PAD(0x354, 0x2C, 7, 0x0, 0, 0)
@@ -107,7 +107,7 @@
 #define _MX53_PAD_KEY_ROW4__GPIO4_15	IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, 0)
 #define _MX53_PAD_KEY_ROW4__CAN2_RXCAN	IOMUX_PAD(0x370, 0x48, 2, 0x764, 0, 0)
 #define _MX53_PAD_KEY_ROW4__IPU_SISG_5	IOMUX_PAD(0x370, 0x48, 3, 0x0, 0, 0)
-#define _MX53_PAD_KEY_ROW4__UART5_CTS	IOMUX_PAD(0x370, 0x48, 4, 0x894, 1, 0)
+#define _MX53_PAD_KEY_ROW4__UART5_CTS	IOMUX_PAD(0x370, 0x48, 4, 0x0, 0, 0)
 #define _MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR	IOMUX_PAD(0x370, 0x48, 5, 0x0, 0, 0)
 #define _MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID	IOMUX_PAD(0x370, 0x48, 7, 0x0, 0, 0)
 #define _MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	IOMUX_PAD(0x378, 0x4C, 0, 0x0, 0, 0)
@@ -377,7 +377,7 @@
 #define _MX53_PAD_CSI0_DAT9__TPIU_TRACE_6		IOMUX_PAD(0x410, 0xE4, 7, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10		IOMUX_PAD(0x414, 0xE8, 0, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT10__GPIO5_28		IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	IOMUX_PAD(0x414, 0xE8, 2, 0x878, 0, 0)
+#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT10__ECSPI2_MISO		IOMUX_PAD(0x414, 0xE8, 3, 0x7BC, 1, 0)
 #define _MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC	IOMUX_PAD(0x414, 0xE8, 4, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4	IOMUX_PAD(0x414, 0xE8, 5, 0x0, 0, 0)
@@ -393,7 +393,7 @@
 #define _MX53_PAD_CSI0_DAT11__TPIU_TRACE_8		IOMUX_PAD(0x418, 0xEC, 7, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12		IOMUX_PAD(0x41C, 0xF0, 0, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT12__GPIO5_30		IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX	IOMUX_PAD(0x41C, 0xF0, 2, 0x890, 2, 0)
+#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX	IOMUX_PAD(0x41C, 0xF0, 2, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0	IOMUX_PAD(0x41C, 0xF0, 4, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6	IOMUX_PAD(0x41C, 0xF0, 5, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41	IOMUX_PAD(0x41C, 0xF0, 6, 0x0, 0, 0)
@@ -407,7 +407,7 @@
 #define _MX53_PAD_CSI0_DAT13__TPIU_TRACE_10		IOMUX_PAD(0x420, 0xF4, 7, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14		IOMUX_PAD(0x424, 0xF8, 0, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT14__GPIO6_0		IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX	IOMUX_PAD(0x424, 0xF8, 2, 0x898, 2, 0)
+#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX	IOMUX_PAD(0x424, 0xF8, 2, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2	IOMUX_PAD(0x424, 0xF8, 4, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8	IOMUX_PAD(0x424, 0xF8, 5, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43	IOMUX_PAD(0x424, 0xF8, 6, 0x0, 0, 0)
@@ -428,7 +428,7 @@
 #define _MX53_PAD_CSI0_DAT16__TPIU_TRACE_13		IOMUX_PAD(0x42C, 0x100, 7, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17		IOMUX_PAD(0x430, 0x104, 0, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT17__GPIO6_3		IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT17__UART4_CTS		IOMUX_PAD(0x430, 0x104, 2, 0x88C, 1, 0)
+#define _MX53_PAD_CSI0_DAT17__UART4_CTS		IOMUX_PAD(0x430, 0x104, 2, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5	IOMUX_PAD(0x430, 0x104, 4, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11	IOMUX_PAD(0x430, 0x104, 5, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46	IOMUX_PAD(0x430, 0x104, 6, 0x0, 0, 0)
@@ -442,7 +442,7 @@
 #define _MX53_PAD_CSI0_DAT18__TPIU_TRACE_15		IOMUX_PAD(0x434, 0x108, 7, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19		IOMUX_PAD(0x438, 0x10C, 0, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT19__GPIO6_5		IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, 0)
-#define _MX53_PAD_CSI0_DAT19__UART5_CTS		IOMUX_PAD(0x438, 0x10C, 2, 0x894, 3, 0)
+#define _MX53_PAD_CSI0_DAT19__UART5_CTS		IOMUX_PAD(0x438, 0x10C, 2, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7	IOMUX_PAD(0x438, 0x10C, 4, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13	IOMUX_PAD(0x438, 0x10C, 5, 0x0, 0, 0)
 #define _MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48	IOMUX_PAD(0x438, 0x10C, 6, 0x0, 0, 0)
@@ -465,19 +465,19 @@
 #define _MX53_PAD_EIM_D16__IPU_DI0_PIN5		IOMUX_PAD(0x460, 0x118, 2, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK	IOMUX_PAD(0x460, 0x118, 3, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D16__ECSPI1_SCLK		IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, 0)
-#define _MX53_PAD_EIM_D16__I2C2_SDA			IOMUX_PAD(0x460, 0x118, 5, 0x820, 1, 0)
+#define _MX53_PAD_EIM_D16__I2C2_SDA			IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, 0)
 #define _MX53_PAD_EIM_D17__EMI_WEIM_D_17		IOMUX_PAD(0x464, 0x11C, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D17__GPIO3_17			IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D17__IPU_DI0_PIN6		IOMUX_PAD(0x464, 0x11C, 2, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN	IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, 0)
 #define _MX53_PAD_EIM_D17__ECSPI1_MISO		IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, 0)
-#define _MX53_PAD_EIM_D17__I2C3_SCL			IOMUX_PAD(0x464, 0x11C, 5, 0x824, 0, 0)
+#define _MX53_PAD_EIM_D17__I2C3_SCL			IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, 0)
 #define _MX53_PAD_EIM_D18__EMI_WEIM_D_18		IOMUX_PAD(0x468, 0x120, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D18__GPIO3_18			IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D18__IPU_DI0_PIN7		IOMUX_PAD(0x468, 0x120, 2, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO	IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, 0)
 #define _MX53_PAD_EIM_D18__ECSPI1_MOSI		IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, 0)
-#define _MX53_PAD_EIM_D18__I2C3_SDA			IOMUX_PAD(0x468, 0x120, 5, 0x828, 0, 0)
+#define _MX53_PAD_EIM_D18__I2C3_SDA			IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, 0)
 #define _MX53_PAD_EIM_D18__IPU_DI1_D0_CS		IOMUX_PAD(0x468, 0x120, 6, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D19__EMI_WEIM_D_19		IOMUX_PAD(0x46C, 0x124, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D19__GPIO3_19			IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, 0)
@@ -485,7 +485,7 @@
 #define _MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS	IOMUX_PAD(0x46C, 0x124, 3, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D19__ECSPI1_SS1		IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, 0)
 #define _MX53_PAD_EIM_D19__EPIT1_EPITO		IOMUX_PAD(0x46C, 0x124, 5, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D19__UART1_CTS			IOMUX_PAD(0x46C, 0x124, 6, 0x874, 0, 0)
+#define _MX53_PAD_EIM_D19__UART1_CTS			IOMUX_PAD(0x46C, 0x124, 6, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D19__USBOH3_USBH2_OC		IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, 0)
 #define _MX53_PAD_EIM_D20__EMI_WEIM_D_20		IOMUX_PAD(0x470, 0x128, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D20__GPIO3_20			IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, 0)
@@ -500,7 +500,7 @@
 #define _MX53_PAD_EIM_D21__IPU_DI0_PIN17		IOMUX_PAD(0x474, 0x12C, 2, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK	IOMUX_PAD(0x474, 0x12C, 3, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D21__CSPI_SCLK			IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, 0)
-#define _MX53_PAD_EIM_D21__I2C1_SCL			IOMUX_PAD(0x474, 0x12C, 5, 0x814, 1, 0)
+#define _MX53_PAD_EIM_D21__I2C1_SCL			IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, 0)
 #define _MX53_PAD_EIM_D21__USBOH3_USBOTG_OC	IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, 0)
 #define _MX53_PAD_EIM_D22__EMI_WEIM_D_22		IOMUX_PAD(0x478, 0x130, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D22__GPIO3_22			IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, 0)
@@ -510,7 +510,7 @@
 #define _MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR	IOMUX_PAD(0x478, 0x130, 6, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D23__EMI_WEIM_D_23		IOMUX_PAD(0x47C, 0x134, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D23__GPIO3_23			IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D23__UART3_CTS			IOMUX_PAD(0x47C, 0x134, 2, 0x884, 0, 0)
+#define _MX53_PAD_EIM_D23__UART3_CTS			IOMUX_PAD(0x47C, 0x134, 2, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D23__UART1_DCD		IOMUX_PAD(0x47C, 0x134, 3, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D23__IPU_DI0_D0_CS		IOMUX_PAD(0x47C, 0x134, 4, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D23__IPU_DI1_PIN2		IOMUX_PAD(0x47C, 0x134, 5, 0x0, 0, 0)
@@ -525,7 +525,7 @@
 #define _MX53_PAD_EIM_EB3__IPU_DI1_PIN16		IOMUX_PAD(0x480, 0x138, 7, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D24__EMI_WEIM_D_24		IOMUX_PAD(0x484, 0x13C, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D24__GPIO3_24			IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D24__UART3_TXD_MUX		IOMUX_PAD(0x484, 0x13C, 2, 0x888, 0, 0)
+#define _MX53_PAD_EIM_D24__UART3_TXD_MUX		IOMUX_PAD(0x484, 0x13C, 2, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D24__ECSPI1_SS2		IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, 0)
 #define _MX53_PAD_EIM_D24__CSPI_SS2			IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, 0)
 #define _MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS	IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, 0)
@@ -541,7 +541,7 @@
 #define _MX53_PAD_EIM_D25__UART1_DSR		IOMUX_PAD(0x488, 0x140, 7, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D26__EMI_WEIM_D_26		IOMUX_PAD(0x48C, 0x144, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D26__GPIO3_26			IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D26__UART2_TXD_MUX		IOMUX_PAD(0x48C, 0x144, 2, 0x880, 0, 0)
+#define _MX53_PAD_EIM_D26__UART2_TXD_MUX		IOMUX_PAD(0x48C, 0x144, 2, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D26__FIRI_RXD			IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, 0)
 #define _MX53_PAD_EIM_D26__IPU_CSI0_D_1		IOMUX_PAD(0x48C, 0x144, 4, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D26__IPU_DI1_PIN11		IOMUX_PAD(0x48C, 0x144, 5, 0x0, 0, 0)
@@ -557,10 +557,10 @@
 #define _MX53_PAD_EIM_D27__IPU_DISP1_DAT_23		IOMUX_PAD(0x490, 0x148, 7, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D28__EMI_WEIM_D_28		IOMUX_PAD(0x494, 0x14C, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D28__GPIO3_28			IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D28__UART2_CTS			IOMUX_PAD(0x494, 0x14C, 2, 0x87C, 0, 0)
+#define _MX53_PAD_EIM_D28__UART2_CTS			IOMUX_PAD(0x494, 0x14C, 2, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO	IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, 0)
 #define _MX53_PAD_EIM_D28__CSPI_MOSI			IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, 0)
-#define _MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5, 0x818, 1, 0)
+#define _MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, 0)
 #define _MX53_PAD_EIM_D28__IPU_EXT_TRIG		IOMUX_PAD(0x494, 0x14C, 6, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D28__IPU_DI0_PIN13		IOMUX_PAD(0x494, 0x14C, 7, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D29__EMI_WEIM_D_29		IOMUX_PAD(0x498, 0x150, 0, 0x0, 0, 0)
@@ -573,7 +573,7 @@
 #define _MX53_PAD_EIM_D29__IPU_DI0_PIN14		IOMUX_PAD(0x498, 0x150, 7, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D30__EMI_WEIM_D_30		IOMUX_PAD(0x49C, 0x154, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D30__GPIO3_30			IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, 0)
-#define _MX53_PAD_EIM_D30__UART3_CTS			IOMUX_PAD(0x49C, 0x154, 2, 0x884, 2, 0)
+#define _MX53_PAD_EIM_D30__UART3_CTS			IOMUX_PAD(0x49C, 0x154, 2, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D30__IPU_CSI0_D_3		IOMUX_PAD(0x49C, 0x154, 3, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D30__IPU_DI0_PIN11		IOMUX_PAD(0x49C, 0x154, 4, 0x0, 0, 0)
 #define _MX53_PAD_EIM_D30__IPU_DISP1_DAT_21		IOMUX_PAD(0x49C, 0x154, 5, 0x0, 0, 0)
@@ -697,7 +697,7 @@
 #define _MX53_PAD_EIM_DA5__GPIO3_5			IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4		IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4		IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6		IOMUX_PAD(0x500, 0x1B0, 17, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6		IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA6__GPIO3_6			IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3		IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0)
@@ -859,7 +859,7 @@
 #define _MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1	IOMUX_PAD(0x5E8, 0x26C, 7, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DIOW__PATA_DIOW		IOMUX_PAD(0x5F0, 0x270, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DIOW__GPIO6_17		IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX	IOMUX_PAD(0x5F0, 0x270, 3, 0x878, 2, 0)
+#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX	IOMUX_PAD(0x5F0, 0x270, 3, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2	IOMUX_PAD(0x5F0, 0x270, 7, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DMACK__PATA_DMACK		IOMUX_PAD(0x5F4, 0x274, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DMACK__GPIO6_18		IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, 0)
@@ -867,7 +867,7 @@
 #define _MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3	IOMUX_PAD(0x5F4, 0x274, 7, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DMARQ__PATA_DMARQ		IOMUX_PAD(0x5F8, 0x278, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DMARQ__GPIO7_0		IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	IOMUX_PAD(0x5F8, 0x278, 3, 0x880, 2, 0)
+#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0	IOMUX_PAD(0x5F8, 0x278, 5, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4	IOMUX_PAD(0x5F8, 0x278, 7, 0x0, 0, 0)
 #define _MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN	IOMUX_PAD(0x5FC, 0x27C, 0, 0x0, 0, 0)
@@ -877,7 +877,7 @@
 #define _MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5	IOMUX_PAD(0x5FC, 0x27C, 7, 0x0, 0, 0)
 #define _MX53_PAD_PATA_INTRQ__PATA_INTRQ		IOMUX_PAD(0x600, 0x280, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_INTRQ__GPIO7_2		IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_INTRQ__UART2_CTS		IOMUX_PAD(0x600, 0x280, 3, 0x87C, 2, 0)
+#define _MX53_PAD_PATA_INTRQ__UART2_CTS		IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, 0)
 #define _MX53_PAD_PATA_INTRQ__CAN1_TXCAN		IOMUX_PAD(0x600, 0x280, 4, 0x0, 0, 0)
 #define _MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2	IOMUX_PAD(0x600, 0x280, 5, 0x0, 0, 0)
 #define _MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6	IOMUX_PAD(0x600, 0x280, 7, 0x0, 0, 0)
@@ -889,7 +889,7 @@
 #define _MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B	IOMUX_PAD(0x608, 0x288, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_RESET_B__GPIO7_4		IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, 0)
 #define _MX53_PAD_PATA_RESET_B__ESDHC3_CMD		IOMUX_PAD(0x608, 0x288, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_RESET_B__UART1_CTS		IOMUX_PAD(0x608, 0x288, 3, 0x874, 2, 0)
+#define _MX53_PAD_PATA_RESET_B__UART1_CTS		IOMUX_PAD(0x608, 0x288, 3, 0x0, 0, 0)
 #define _MX53_PAD_PATA_RESET_B__CAN2_TXCAN		IOMUX_PAD(0x608, 0x288, 4, 0x0, 0, 0)
 #define _MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0	IOMUX_PAD(0x608, 0x288, 7, 0x0, 0, 0)
 #define _MX53_PAD_PATA_IORDY__PATA_IORDY		IOMUX_PAD(0x60C, 0x28C, 0, 0x0, 0, 0)
@@ -906,7 +906,7 @@
 #define _MX53_PAD_PATA_DA_1__PATA_DA_1		IOMUX_PAD(0x614, 0x294, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DA_1__GPIO7_7		IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DA_1__ESDHC4_CMD		IOMUX_PAD(0x614, 0x294, 2, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DA_1__UART3_CTS		IOMUX_PAD(0x614, 0x294, 4, 0x884, 4, 0)
+#define _MX53_PAD_PATA_DA_1__UART3_CTS		IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3	IOMUX_PAD(0x614, 0x294, 7, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DA_2__PATA_DA_2		IOMUX_PAD(0x618, 0x298, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DA_2__GPIO7_8		IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, 0)
@@ -915,7 +915,7 @@
 #define _MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4	IOMUX_PAD(0x618, 0x298, 7, 0x0, 0, 0)
 #define _MX53_PAD_PATA_CS_0__PATA_CS_0		IOMUX_PAD(0x61C, 0x29C, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_CS_0__GPIO7_9			IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX		IOMUX_PAD(0x61C, 0x29C, 4, 0x888, 2, 0)
+#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX		IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, 0)
 #define _MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5	IOMUX_PAD(0x61C, 0x29C, 7, 0x0, 0, 0)
 #define _MX53_PAD_PATA_CS_1__PATA_CS_1		IOMUX_PAD(0x620, 0x2A0, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_CS_1__GPIO7_10		IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, 0)
@@ -958,12 +958,12 @@
 #define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5		IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5	IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5	IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__PATA_DATA_6	IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__PATA_DATA_6	IOMUX_PAD(0x640, 0x2BC, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA6__GPIO2_6		IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6		IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6	IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6	IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	IOMUX_PAD(0x640, 0x2BC, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6		IOMUX_PAD(0x640, 0x2BC, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6	IOMUX_PAD(0x640, 0x2BC, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6	IOMUX_PAD(0x640, 0x2BC, 6, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA7__PATA_DATA_7		IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA7__GPIO2_7		IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0)
@@ -1161,13 +1161,13 @@
 #define _MX53_PAD_GPIO_5__CCM_CLKO		IOMUX_PAD(0x6C0, 0x330, 3, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2	IOMUX_PAD(0x6C0, 0x330, 4, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4	IOMUX_PAD(0x6C0, 0x330, 5, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_5__I2C3_SCL		IOMUX_PAD(0x6C0, 0x330, 6, 0x824, 2, 0)
+#define _MX53_PAD_GPIO_5__I2C3_SCL		IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, 0)
 #define _MX53_PAD_GPIO_5__CCM_PLL1_BYP	IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, 0)
 #define _MX53_PAD_GPIO_7__ESAI1_TX4_RX1	IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, 0)
 #define _MX53_PAD_GPIO_7__GPIO1_7		IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_7__EPIT1_EPITO	IOMUX_PAD(0x6C4, 0x334, 2, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_7__CAN1_TXCAN	IOMUX_PAD(0x6C4, 0x334, 3, 0x0, 0, 0)
-#define _MX53_PAD_GPIO_7__UART2_TXD_MUX	IOMUX_PAD(0x6C4, 0x334, 4, 0x880, 4, 0)
+#define _MX53_PAD_GPIO_7__UART2_TXD_MUX	IOMUX_PAD(0x6C4, 0x334, 4, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_7__FIRI_RXD		IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, 0)
 #define _MX53_PAD_GPIO_7__SPDIF_PLOCK	IOMUX_PAD(0x6C4, 0x334, 6, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_7__CCM_PLL2_BYP	IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, 0)
@@ -1214,27 +1214,27 @@
 #define MX53_PAD_KEY_COL0__KPP_COL_0		(_MX53_PAD_KEY_COL0__KPP_COL_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL0__GPIO4_6		(_MX53_PAD_KEY_COL0__GPIO4_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC		(_MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL0__UART4_TXD_MUX		(_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL0__UART4_TXD_MUX		(_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_KEY_COL0__ECSPI1_SCLK		(_MX53_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL0__FEC_RDATA_3		(_MX53_PAD_KEY_COL0__FEC_RDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST		(_MX53_PAD_KEY_COL0__SRC_ANY_PU_RST | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW0__KPP_ROW_0		(_MX53_PAD_KEY_ROW0__KPP_ROW_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW0__GPIO4_7		(_MX53_PAD_KEY_ROW0__GPIO4_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD		(_MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX		(_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX		(_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_KEY_ROW0__ECSPI1_MOSI		(_MX53_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW0__FEC_TX_ER		(_MX53_PAD_KEY_ROW0__FEC_TX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL1__KPP_COL_1		(_MX53_PAD_KEY_COL1__KPP_COL_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL1__GPIO4_8		(_MX53_PAD_KEY_COL1__GPIO4_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS		(_MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL1__UART5_TXD_MUX		(_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL1__UART5_TXD_MUX		(_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_KEY_COL1__ECSPI1_MISO		(_MX53_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL1__FEC_RX_CLK		(_MX53_PAD_KEY_COL1__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL1__USBPHY1_TXREADY		(_MX53_PAD_KEY_COL1__USBPHY1_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW1__KPP_ROW_1		(_MX53_PAD_KEY_ROW1__KPP_ROW_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW1__GPIO4_9		(_MX53_PAD_KEY_ROW1__GPIO4_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD		(_MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX		(_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX		(_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_KEY_ROW1__ECSPI1_SS0		(_MX53_PAD_KEY_ROW1__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW1__FEC_COL		(_MX53_PAD_KEY_ROW1__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID		(_MX53_PAD_KEY_ROW1__USBPHY1_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1272,14 +1272,14 @@
 #define MX53_PAD_KEY_COL4__GPIO4_14		(_MX53_PAD_KEY_COL4__GPIO4_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL4__CAN2_TXCAN		(_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL4__IPU_SISG_4		(_MX53_PAD_KEY_COL4__IPU_SISG_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_COL4__UART5_RTS		(_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_COL4__UART5_RTS		(_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC		(_MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1		(_MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW4__KPP_ROW_4		(_MX53_PAD_KEY_ROW4__KPP_ROW_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW4__GPIO4_15		(_MX53_PAD_KEY_ROW4__GPIO4_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW4__CAN2_RXCAN		(_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW4__IPU_SISG_5		(_MX53_PAD_KEY_ROW4__IPU_SISG_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_KEY_ROW4__UART5_CTS		(_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_KEY_ROW4__UART5_CTS		(_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR		(_MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID		(_MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		(_MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1565,56 +1565,56 @@
 #define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8		(_MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12		(_MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT12__GPIO5_30		(_MX53_PAD_CSI0_DAT12__GPIO5_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX		(_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX		(_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0		(_MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6		(_MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41		(_MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9		(_MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13		(_MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT13__GPIO5_31		(_MX53_PAD_CSI0_DAT13__GPIO5_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX		(_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX		(_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1		(_MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7		(_MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42		(_MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10		(_MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14		(_MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT14__GPIO6_0		(_MX53_PAD_CSI0_DAT14__GPIO6_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX		(_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX		(_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2		(_MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8		(_MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43		(_MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11		(_MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15		(_MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT15__GPIO6_1		(_MX53_PAD_CSI0_DAT15__GPIO6_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX		(_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX		(_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3		(_MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9		(_MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44		(_MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12		(_MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16		(_MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT16__GPIO6_2		(_MX53_PAD_CSI0_DAT16__GPIO6_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT16__UART4_RTS		(_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT16__UART4_RTS		(_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4		(_MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10		(_MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45		(_MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13		(_MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17		(_MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT17__GPIO6_3		(_MX53_PAD_CSI0_DAT17__GPIO6_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT17__UART4_CTS		(_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT17__UART4_CTS		(_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5		(_MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11		(_MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46		(_MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14		(_MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18		(_MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT18__GPIO6_4		(_MX53_PAD_CSI0_DAT18__GPIO6_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT18__UART5_RTS		(_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT18__UART5_RTS		(_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6		(_MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12		(_MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47		(_MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15		(_MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19		(_MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT19__GPIO6_5		(_MX53_PAD_CSI0_DAT19__GPIO6_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_CSI0_DAT19__UART5_CTS		(_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_CSI0_DAT19__UART5_CTS		(_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7		(_MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13		(_MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48		(_MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1657,7 +1657,7 @@
 #define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS		(_MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D19__ECSPI1_SS1		(_MX53_PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D19__EPIT1_EPITO		(_MX53_PAD_EIM_D19__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D19__UART1_CTS		(_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D19__UART1_CTS		(_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D19__USBOH3_USBH2_OC		(_MX53_PAD_EIM_D19__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D20__EMI_WEIM_D_20		(_MX53_PAD_EIM_D20__EMI_WEIM_D_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D20__GPIO3_20		(_MX53_PAD_EIM_D20__GPIO3_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1665,7 +1665,7 @@
 #define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS		(_MX53_PAD_EIM_D20__IPU_SER_DISP0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D20__CSPI_SS0		(_MX53_PAD_EIM_D20__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D20__EPIT2_EPITO		(_MX53_PAD_EIM_D20__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D20__UART1_RTS		(_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D20__UART1_RTS		(_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR		(_MX53_PAD_EIM_D20__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D21__EMI_WEIM_D_21		(_MX53_PAD_EIM_D21__EMI_WEIM_D_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D21__GPIO3_21		(_MX53_PAD_EIM_D21__GPIO3_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1682,7 +1682,7 @@
 #define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR		(_MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D23__EMI_WEIM_D_23		(_MX53_PAD_EIM_D23__EMI_WEIM_D_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D23__GPIO3_23		(_MX53_PAD_EIM_D23__GPIO3_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D23__UART3_CTS		(_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D23__UART3_CTS		(_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D23__UART1_DCD		(_MX53_PAD_EIM_D23__UART1_DCD | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D23__IPU_DI0_D0_CS		(_MX53_PAD_EIM_D23__IPU_DI0_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D23__IPU_DI1_PIN2		(_MX53_PAD_EIM_D23__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1690,14 +1690,14 @@
 #define MX53_PAD_EIM_D23__IPU_DI1_PIN14		(_MX53_PAD_EIM_D23__IPU_DI1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3		(_MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_EB3__GPIO2_31		(_MX53_PAD_EIM_EB3__GPIO2_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_EB3__UART3_RTS		(_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_EB3__UART3_RTS		(_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_EB3__UART1_RI		(_MX53_PAD_EIM_EB3__UART1_RI | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_EB3__IPU_DI1_PIN3		(_MX53_PAD_EIM_EB3__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC		(_MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_EB3__IPU_DI1_PIN16		(_MX53_PAD_EIM_EB3__IPU_DI1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D24__EMI_WEIM_D_24		(_MX53_PAD_EIM_D24__EMI_WEIM_D_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D24__GPIO3_24		(_MX53_PAD_EIM_D24__GPIO3_24 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D24__UART3_TXD_MUX		(_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D24__UART3_TXD_MUX		(_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D24__ECSPI1_SS2		(_MX53_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D24__CSPI_SS2		(_MX53_PAD_EIM_D24__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS		(_MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1705,7 +1705,7 @@
 #define MX53_PAD_EIM_D24__UART1_DTR		(_MX53_PAD_EIM_D24__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D25__EMI_WEIM_D_25		(_MX53_PAD_EIM_D25__EMI_WEIM_D_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D25__GPIO3_25		(_MX53_PAD_EIM_D25__GPIO3_25 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D25__UART3_RXD_MUX		(_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D25__UART3_RXD_MUX		(_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D25__ECSPI1_SS3		(_MX53_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D25__CSPI_SS3		(_MX53_PAD_EIM_D25__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC		(_MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1713,7 +1713,7 @@
 #define MX53_PAD_EIM_D25__UART1_DSR		(_MX53_PAD_EIM_D25__UART1_DSR | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D26__EMI_WEIM_D_26		(_MX53_PAD_EIM_D26__EMI_WEIM_D_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D26__GPIO3_26		(_MX53_PAD_EIM_D26__GPIO3_26 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D26__UART2_TXD_MUX		(_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D26__UART2_TXD_MUX		(_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D26__FIRI_RXD		(_MX53_PAD_EIM_D26__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D26__IPU_CSI0_D_1		(_MX53_PAD_EIM_D26__IPU_CSI0_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D26__IPU_DI1_PIN11		(_MX53_PAD_EIM_D26__IPU_DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1721,7 +1721,7 @@
 #define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22		(_MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D27__EMI_WEIM_D_27		(_MX53_PAD_EIM_D27__EMI_WEIM_D_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D27__GPIO3_27		(_MX53_PAD_EIM_D27__GPIO3_27 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D27__UART2_RXD_MUX		(_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D27__UART2_RXD_MUX		(_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D27__FIRI_TXD		(_MX53_PAD_EIM_D27__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D27__IPU_CSI0_D_0		(_MX53_PAD_EIM_D27__IPU_CSI0_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D27__IPU_DI1_PIN13		(_MX53_PAD_EIM_D27__IPU_DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1729,7 +1729,7 @@
 #define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23		(_MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D28__EMI_WEIM_D_28		(_MX53_PAD_EIM_D28__EMI_WEIM_D_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D28__GPIO3_28		(_MX53_PAD_EIM_D28__GPIO3_28 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D28__UART2_CTS		(_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D28__UART2_CTS		(_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO		(_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D28__CSPI_MOSI		(_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D28__I2C1_SDA		(_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1737,7 +1737,7 @@
 #define MX53_PAD_EIM_D28__IPU_DI0_PIN13		(_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D29__EMI_WEIM_D_29		(_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D29__GPIO3_29		(_MX53_PAD_EIM_D29__GPIO3_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D29__UART2_RTS		(_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D29__UART2_RTS		(_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS		(_MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D29__CSPI_SS0		(_MX53_PAD_EIM_D29__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D29__IPU_DI1_PIN15		(_MX53_PAD_EIM_D29__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1745,7 +1745,7 @@
 #define MX53_PAD_EIM_D29__IPU_DI0_PIN14		(_MX53_PAD_EIM_D29__IPU_DI0_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D30__EMI_WEIM_D_30		(_MX53_PAD_EIM_D30__EMI_WEIM_D_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D30__GPIO3_30		(_MX53_PAD_EIM_D30__GPIO3_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D30__UART3_CTS		(_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D30__UART3_CTS		(_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D30__IPU_CSI0_D_3		(_MX53_PAD_EIM_D30__IPU_CSI0_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D30__IPU_DI0_PIN11		(_MX53_PAD_EIM_D30__IPU_DI0_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21		(_MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -1753,7 +1753,7 @@
 #define MX53_PAD_EIM_D30__USBOH3_USBH2_OC		(_MX53_PAD_EIM_D30__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D31__EMI_WEIM_D_31		(_MX53_PAD_EIM_D31__EMI_WEIM_D_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D31__GPIO3_31		(_MX53_PAD_EIM_D31__GPIO3_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_EIM_D31__UART3_RTS		(_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_EIM_D31__UART3_RTS		(_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_EIM_D31__IPU_CSI0_D_2		(_MX53_PAD_EIM_D31__IPU_CSI0_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D31__IPU_DI0_PIN12		(_MX53_PAD_EIM_D31__IPU_DI0_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20		(_MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2061,13 +2061,13 @@
 #define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B		(_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_PATA_RESET_B__GPIO7_4		(_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_PATA_RESET_B__ESDHC3_CMD		(_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_RESET_B__UART1_CTS		(_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_RESET_B__UART1_CTS		(_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_PATA_RESET_B__CAN2_TXCAN		(_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0		(_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_PATA_IORDY__PATA_IORDY		(_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_PATA_IORDY__GPIO7_5		(_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_PATA_IORDY__ESDHC3_CLK		(_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL))
-#define MX53_PAD_PATA_IORDY__UART1_RTS		(_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_PATA_IORDY__UART1_RTS		(_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_PATA_IORDY__CAN2_RXCAN		(_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1		(_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_PATA_DA_0__PATA_DA_0		(_MX53_PAD_PATA_DA_0__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2339,7 +2339,7 @@
 #define MX53_PAD_GPIO_7__GPIO1_7		(_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_7__EPIT1_EPITO		(_MX53_PAD_GPIO_7__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_7__CAN1_TXCAN		(_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_7__UART2_TXD_MUX		(_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_7__UART2_TXD_MUX		(_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_GPIO_7__FIRI_RXD		(_MX53_PAD_GPIO_7__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_7__SPDIF_PLOCK		(_MX53_PAD_GPIO_7__SPDIF_PLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_7__CCM_PLL2_BYP		(_MX53_PAD_GPIO_7__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
@@ -2347,7 +2347,7 @@
 #define MX53_PAD_GPIO_8__GPIO1_8		(_MX53_PAD_GPIO_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_8__EPIT2_EPITO		(_MX53_PAD_GPIO_8__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_8__CAN1_RXCAN		(_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL))
-#define MX53_PAD_GPIO_8__UART2_RXD_MUX		(_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX53_PAD_GPIO_8__UART2_RXD_MUX		(_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
 #define MX53_PAD_GPIO_8__FIRI_TXD		(_MX53_PAD_GPIO_8__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_8__SPDIF_SRCLK		(_MX53_PAD_GPIO_8__SPDIF_SRCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
 #define MX53_PAD_GPIO_8__CCM_PLL3_BYP		(_MX53_PAD_GPIO_8__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))

arch/arm/plat-mxc/include/mach/iomux-v1.h

@@ -98,7 +98,6 @@
 extern int mxc_gpio_mode(int gpio_mode);
 extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 		const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
 
 extern int __init imx_iomuxv1_init(void __iomem *base, int numports);
 

arch/arm/plat-mxc/include/mach/iomux-v3.h

@@ -66,7 +66,6 @@ typedef u64 iomux_v3_cfg_t;
 #define MUX_MODE_MASK		((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
 #define MUX_PAD_CTRL_SHIFT	41
 #define MUX_PAD_CTRL_MASK	((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
-#define NO_PAD_CTRL		((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16))
 #define MUX_SEL_INPUT_SHIFT	58
 #define MUX_SEL_INPUT_MASK	((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
 
@@ -85,6 +84,7 @@ typedef u64 iomux_v3_cfg_t;
  * Use to set PAD control
  */
 
+#define NO_PAD_CTRL			(1 << 16)
 #define PAD_CTL_DVS			(1 << 13)
 #define PAD_CTL_HYS			(1 << 8)
 

arch/arm/plat-mxc/include/mach/mx53.h

@@ -145,14 +145,14 @@
 /*
  * Memory regions and CS
  */
-#define MX53_CSD0_BASE_ADDR		0x90000000
-#define MX53_CSD1_BASE_ADDR		0xA0000000
-#define MX53_CS0_BASE_ADDR		0xB0000000
-#define MX53_CS1_BASE_ADDR		0xB8000000
-#define MX53_CS2_BASE_ADDR		0xC0000000
-#define MX53_CS3_BASE_ADDR		0xC8000000
-#define MX53_CS4_BASE_ADDR		0xCC000000
-#define MX53_CS5_BASE_ADDR		0xCE000000
+#define MX53_CSD0_BASE_ADDR		0x70000000
+#define MX53_CSD1_BASE_ADDR		0xB0000000
+#define MX53_CS0_BASE_ADDR		0xF0000000
+#define MX53_CS1_32MB_BASE_ADDR	0xF2000000
+#define MX53_CS1_64MB_BASE_ADDR		0xF4000000
+#define MX53_CS2_64MB_BASE_ADDR		0xF4000000
+#define MX53_CS2_96MB_BASE_ADDR		0xF6000000
+#define MX53_CS3_BASE_ADDR		0xF6000000
 
 #define MX53_IO_P2V(x)			IMX_IO_P2V(x)
 #define MX53_IO_ADDRESS(x)		IOMEM(MX53_IO_P2V(x))
@@ -233,7 +233,7 @@
 #define MX53_INT_ESDHC2	2
 #define MX53_INT_ESDHC3	3
 #define MX53_INT_ESDHC4	4
-#define MX53_INT_RESV5	5
+#define MX53_INT_DAP	5
 #define MX53_INT_SDMA	6
 #define MX53_INT_IOMUX	7
 #define MX53_INT_NFC	8
@@ -262,8 +262,8 @@
 #define MX53_INT_UART1	31
 #define MX53_INT_UART2	32
 #define MX53_INT_UART3	33
-#define MX53_INT_RESV34	34
-#define MX53_INT_RESV35	35
+#define MX53_INT_RTC	34
+#define MX53_INT_PTP	35
 #define MX53_INT_ECSPI1	36
 #define MX53_INT_ECSPI2	37
 #define MX53_INT_CSPI	38
@@ -293,8 +293,8 @@
 #define MX53_INT_I2C1	62
 #define MX53_INT_I2C2	63
 #define MX53_INT_I2C3	64
-#define MX53_INT_RESV65	65
-#define MX53_INT_RESV66	66
+#define MX53_INT_MLB	65
+#define MX53_INT_ASRC	66
 #define MX53_INT_SPDIF	67
 #define MX53_INT_SIM_DAT	68
 #define MX53_INT_IIM	69

arch/arm/plat-mxc/iomux-v1.c

@@ -157,7 +157,7 @@ EXPORT_SYMBOL(mxc_gpio_mode);
 static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
 {
 	size_t i;
-	int ret;
+	int ret = 0;
 
 	for (i = 0; i < count; ++i) {
 		ret = mxc_gpio_mode(list[i]);
@@ -172,45 +172,13 @@ static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
 int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 		const char *label)
 {
-	size_t i;
 	int ret;
 
-	for (i = 0; i < count; ++i) {
-		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		ret = gpio_request(gpio, label);
-		if (ret)
-			goto err_gpio_request;
-	}
-
 	ret = imx_iomuxv1_setup_multiple(pin_list, count);
-	if (ret)
-		goto err_setup;
-
-	return 0;
-
-err_setup:
-	BUG_ON(i != count);
-
-err_gpio_request:
-	mxc_gpio_release_multiple_pins(pin_list, i);
-
 	return ret;
 }
 EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
 
-void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
-{
-	size_t i;
-
-	for (i = 0; i < count; ++i) {
-		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		gpio_free(gpio);
-	}
-}
-EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
-
 int __init imx_iomuxv1_init(void __iomem *base, int numports)
 {
 	imx_iomuxv1_baseaddr = base;

drivers/dma/imx-dma.c

@@ -135,7 +135,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		if (ret)
 			return ret;
 
-		imx_dma_config_burstlen(imxdmac->imxdma_channel, imxdmac->watermark_level);
+		imx_dma_config_burstlen(imxdmac->imxdma_channel,
+				imxdmac->watermark_level * imxdmac->word_size);
 
 		return 0;
 	default:

drivers/mmc/host/mxcmmc.c

@@ -715,13 +715,13 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	int burstlen, ret;
 
 	/*
-	 * use burstlen of 64 in 4 bit mode (--> reg value  0)
-	 * use burstlen of 16 in 1 bit mode (--> reg value 16)
+	 * use burstlen of 64 (16 words) in 4 bit mode (--> reg value  0)
+	 * use burstlen of 16 (4 words) in 1 bit mode (--> reg value 16)
 	 */
 	if (ios->bus_width == MMC_BUS_WIDTH_4)
-		burstlen = 64;
-	else
 		burstlen = 16;
+	else
+		burstlen = 4;
 
 	if (mxcmci_use_dma(host) && burstlen != host->burstlen) {
 		host->burstlen = burstlen;

sound/soc/imx/imx-pcm-dma-mx2.c

@@ -110,12 +110,12 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
 		slave_config.direction = DMA_TO_DEVICE;
 		slave_config.dst_addr = dma_params->dma_addr;
 		slave_config.dst_addr_width = buswidth;
-		slave_config.dst_maxburst = dma_params->burstsize * buswidth;
+		slave_config.dst_maxburst = dma_params->burstsize;
 	} else {
 		slave_config.direction = DMA_FROM_DEVICE;
 		slave_config.src_addr = dma_params->dma_addr;
 		slave_config.src_addr_width = buswidth;
-		slave_config.src_maxburst = dma_params->burstsize * buswidth;
+		slave_config.src_maxburst = dma_params->burstsize;
 	}
 
 	ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);