[PATCH] powerpc: Kill ppcdebug

The ancient ppcdebug/PPCDBG mechanism is now only used in two places.
First, in the hash setup code, one of the bits allows the size of the
hash table to be reduced by a factor of 8 - which would be better
accomplished with a command line option for that purpose.  The other
was a bunch of bus walking related messages in the iSeries code, which
would seem to be insufficient reason to keep the mechanism.

This patch removes the last traces of this mechanism.

Built and booted on iSeries and pSeries POWER5 LPAR (ARCH=powerpc).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/kernel/setup_64.c

@@ -41,7 +41,6 @@
 #include <asm/elf.h>
 #include <asm/machdep.h>
 #include <asm/paca.h>
-#include <asm/ppcdebug.h>
 #include <asm/time.h>
 #include <asm/cputable.h>
 #include <asm/sections.h>
@@ -60,6 +59,7 @@
 #include <asm/firmware.h>
 #include <asm/systemcfg.h>
 #include <asm/xmon.h>
+#include <asm/udbg.h>
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
@@ -243,12 +243,6 @@ void __init early_setup(unsigned long dt_ptr)
 
 	DBG(" -> early_setup()\n");
 
-	/*
-	 * Fill the default DBG level (do we want to keep
-	 * that old mecanism around forever ?)
-	 */
-	ppcdbg_initialize();
-
 	/*
 	 * Do early initializations using the flattened device
 	 * tree, like retreiving the physical memory map or
@@ -516,7 +510,6 @@ void __init setup_system(void)
 
 	printk("-----------------------------------------------------\n");
 	printk("ppc64_pft_size                = 0x%lx\n", ppc64_pft_size);
-	printk("ppc64_debug_switch            = 0x%lx\n", ppc64_debug_switch);
 	printk("ppc64_interrupt_controller    = 0x%ld\n", ppc64_interrupt_controller);
 	printk("systemcfg                     = 0x%p\n", systemcfg);
 	printk("systemcfg->platform           = 0x%x\n", systemcfg->platform);

arch/powerpc/kernel/signal_32.c

@@ -44,7 +44,6 @@
 #include <asm/cacheflush.h>
 #ifdef CONFIG_PPC64
 #include "ppc32.h"
-#include <asm/ppcdebug.h>
 #include <asm/unistd.h>
 #include <asm/vdso.h>
 #else

arch/powerpc/kernel/signal_64.c

@@ -33,7 +33,6 @@
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
-#include <asm/ppcdebug.h>
 #include <asm/unistd.h>
 #include <asm/cacheflush.h>
 #include <asm/vdso.h>

arch/powerpc/mm/hash_utils_64.c

@@ -32,7 +32,6 @@
 #include <linux/init.h>
 #include <linux/signal.h>
 
-#include <asm/ppcdebug.h>
 #include <asm/processor.h>
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
@@ -194,12 +193,6 @@ void __init htab_initialize(void)
 	htab_size_bytes = get_hashtable_size();
 	pteg_count = htab_size_bytes >> 7;
 
-	/* For debug, make the HTAB 1/8 as big as it normally would be. */
-	ifppcdebug(PPCDBG_HTABSIZE) {
-		pteg_count >>= 3;
-		htab_size_bytes = pteg_count << 7;
-	}
-
 	htab_hash_mask = pteg_count - 1;
 
 	if (systemcfg->platform & PLATFORM_LPAR) {

arch/powerpc/mm/init_64.c

@@ -57,7 +57,6 @@
 #include <asm/processor.h>
 #include <asm/mmzone.h>
 #include <asm/cputable.h>
-#include <asm/ppcdebug.h>
 #include <asm/sections.h>
 #include <asm/system.h>
 #include <asm/iommu.h>

arch/powerpc/mm/pgtable_64.c

@@ -59,7 +59,6 @@
 #include <asm/processor.h>
 #include <asm/mmzone.h>
 #include <asm/cputable.h>
-#include <asm/ppcdebug.h>
 #include <asm/sections.h>
 #include <asm/system.h>
 #include <asm/iommu.h>

arch/powerpc/platforms/iseries/irq.c

@@ -35,7 +35,6 @@
 #include <linux/irq.h>
 #include <linux/spinlock.h>
 
-#include <asm/ppcdebug.h>
 #include <asm/iseries/hv_types.h>
 #include <asm/iseries/hv_lp_event.h>
 #include <asm/iseries/hv_call_xm.h>
@@ -227,8 +226,6 @@ static void iSeries_enable_IRQ(unsigned int irq)
 	/* Unmask secondary INTA */
 	mask = 0x80000000;
 	HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask);
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
-			bus, subBus, deviceId, irq);
 }
 
 /* This is called by iSeries_activate_IRQs */
@@ -310,8 +307,6 @@ static void iSeries_disable_IRQ(unsigned int irq)
 	/* Mask secondary INTA   */
 	mask = 0x80000000;
 	HvCallPci_maskInterrupts(bus, subBus, deviceId, mask);
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
-			bus, subBus, deviceId, irq);
 }
 
 /*

arch/powerpc/platforms/iseries/pci.c

@@ -32,7 +32,6 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
-#include <asm/ppcdebug.h>
 #include <asm/iommu.h>
 #include <asm/abs_addr.h>
 
@@ -207,10 +206,6 @@ static struct device_node *build_device_node(HvBusNumber Bus,
 	struct device_node *node;
 	struct pci_dn *pdn;
 
-	PPCDBG(PPCDBG_BUSWALK,
-			"-build_device_node 0x%02X.%02X.%02X Function: %02X\n",
-			Bus, SubBus, AgentId, Function);
-
 	node = kmalloc(sizeof(struct device_node), GFP_KERNEL);
 	if (node == NULL)
 		return NULL;
@@ -243,8 +238,6 @@ unsigned long __init find_and_init_phbs(void)
 	struct pci_controller *phb;
 	HvBusNumber bus;
 
-	PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n");
-
 	/* Check all possible buses. */
 	for (bus = 0; bus < 256; bus++) {
 		int ret = HvCallXm_testBus(bus);
@@ -261,9 +254,6 @@ unsigned long __init find_and_init_phbs(void)
 			phb->last_busno = bus;
 			phb->ops = &iSeries_pci_ops;
 
-			PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n",
-					phb, bus);
-
 			/* Find and connect the devices. */
 			scan_PHB_slots(phb);
 		}
@@ -285,11 +275,9 @@ unsigned long __init find_and_init_phbs(void)
  */
 void iSeries_pcibios_init(void)
 {
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n");
 	iomm_table_initialize();
 	find_and_init_phbs();
 	io_page_mask = -1;
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n");
 }
 
 /*
@@ -301,8 +289,6 @@ void __init iSeries_pci_final_fixup(void)
 	struct device_node *node;
 	int DeviceCount = 0;
 
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n");
-
 	/* Fix up at the device node and pci_dev relationship */
 	mf_display_src(0xC9000100);
 
@@ -316,9 +302,6 @@ void __init iSeries_pci_final_fixup(void)
 			++DeviceCount;
 			pdev->sysdata = (void *)node;
 			PCI_DN(node)->pcidev = pdev;
-			PPCDBG(PPCDBG_BUSWALK,
-					"pdev 0x%p <==> DevNode 0x%p\n",
-					pdev, node);
 			allocate_device_bars(pdev);
 			iSeries_Device_Information(pdev, DeviceCount);
 			iommu_devnode_init_iSeries(node);
@@ -333,13 +316,10 @@ void __init iSeries_pci_final_fixup(void)
 
 void pcibios_fixup_bus(struct pci_bus *PciBus)
 {
-	PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n",
-			PciBus->number);
 }
 
 void pcibios_fixup_resources(struct pci_dev *pdev)
 {
-	PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev);
 }
 
 /*
@@ -401,9 +381,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
 			printk("found device at bus %d idsel %d func %d (AgentId %x)\n",
 			       bus, IdSel, Function, AgentId);
 			/*  Connect EADs: 0x18.00.12 = 0x00 */
-			PPCDBG(PPCDBG_BUSWALK,
-					"PCI:Connect EADs: 0x%02X.%02X.%02X\n",
-					bus, SubBus, AgentId);
 			HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId,
 					iseries_hv_addr(BridgeInfo),
 					sizeof(struct HvCallPci_BridgeInfo));
@@ -414,14 +391,6 @@ static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
 					BridgeInfo->maxAgents,
 					BridgeInfo->maxSubBusNumber,
 					BridgeInfo->logicalSlotNumber);
-				PPCDBG(PPCDBG_BUSWALK,
-					"PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n",
-					BridgeInfo->busUnitInfo.deviceType,
-					BridgeInfo->subBusNumber,
-					BridgeInfo->maxAgents,
-					BridgeInfo->maxSubBusNumber,
-					BridgeInfo->logicalSlotNumber);
-
 				if (BridgeInfo->busUnitInfo.deviceType ==
 						HvCallPci_BridgeDevice)  {
 					/* Scan_Bridge_Slot...: 0x18.00.12 */
@@ -454,9 +423,6 @@ static int scan_bridge_slot(HvBusNumber Bus,
 
 	/* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */
 	Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel);
-	PPCDBG(PPCDBG_BUSWALK,
-		"PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n",
-		Bus, 0, EADsIdSel, Irq);
 
 	/*
 	 * Connect all functions of any device found.
@@ -482,9 +448,6 @@ static int scan_bridge_slot(HvBusNumber Bus,
 			printk("read vendor ID: %x\n", VendorId);
 
 			/* FoundDevice: 0x18.28.10 = 0x12AE */
-			PPCDBG(PPCDBG_BUSWALK,
-			       "PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n",
-			       Bus, SubBus, AgentId, VendorId, Irq);
 			HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId,
 						      PCI_INTERRUPT_LINE, Irq);
 			if (HvRc != 0)

arch/powerpc/platforms/iseries/setup.c

@@ -71,8 +71,6 @@ extern void hvlog(char *fmt, ...);
 #endif
 
 /* Function Prototypes */
-extern void ppcdbg_initialize(void);
-
 static void build_iSeries_Memory_Map(void);
 static void iseries_shared_idle(void);
 static void iseries_dedicated_idle(void);
@@ -309,8 +307,6 @@ static void __init iSeries_init_early(void)
 
 	ppc64_firmware_features = FW_FEATURE_ISERIES;
 
-	ppcdbg_initialize();
-
 	ppc64_interrupt_controller = IC_ISERIES;
 
 #if defined(CONFIG_BLK_DEV_INITRD)

arch/powerpc/platforms/iseries/smp.c

@@ -40,7 +40,6 @@
 #include <asm/paca.h>
 #include <asm/iseries/hv_call.h>
 #include <asm/time.h>
-#include <asm/ppcdebug.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/system.h>

arch/powerpc/platforms/pseries/iommu.c

@@ -37,7 +37,6 @@
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/rtas.h>
-#include <asm/ppcdebug.h>
 #include <asm/iommu.h>
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>

arch/powerpc/platforms/pseries/lpar.c

@@ -31,13 +31,13 @@
 #include <asm/machdep.h>
 #include <asm/abs_addr.h>
 #include <asm/mmu_context.h>
-#include <asm/ppcdebug.h>
 #include <asm/iommu.h>
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 #include <asm/prom.h>
 #include <asm/abs_addr.h>
 #include <asm/cputable.h>
+#include <asm/udbg.h>
 
 #include "plpar_wrappers.h"
 

arch/powerpc/platforms/pseries/ras.c

@@ -48,7 +48,7 @@
 #include <asm/ptrace.h>
 #include <asm/machdep.h>
 #include <asm/rtas.h>
-#include <asm/ppcdebug.h>
+#include <asm/udbg.h>
 
 static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
 static DEFINE_SPINLOCK(ras_log_buf_lock);

arch/powerpc/sysdev/u3_iommu.c

@@ -37,7 +37,6 @@
 #include <linux/vmalloc.h>
 #include <asm/io.h>
 #include <asm/prom.h>
-#include <asm/ppcdebug.h>
 #include <asm/iommu.h>
 #include <asm/pci-bridge.h>
 #include <asm/machdep.h>

arch/ppc64/Kconfig.debug

@@ -55,10 +55,6 @@ config XMON_DEFAULT
 	  xmon is normally disabled unless booted with 'xmon=on'.
 	  Use 'xmon=off' to disable xmon init during runtime.
 
-config PPCDBG
-	bool "Include PPCDBG realtime debugging"
-	depends on DEBUG_KERNEL
-
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	help

arch/ppc64/kernel/prom.c

@@ -46,7 +46,6 @@
 #include <asm/pgtable.h>
 #include <asm/pci.h>
 #include <asm/iommu.h>
-#include <asm/ppcdebug.h>
 #include <asm/btext.h>
 #include <asm/sections.h>
 #include <asm/machdep.h>

arch/ppc64/kernel/prom_init.c

@@ -44,7 +44,6 @@
 #include <asm/pgtable.h>
 #include <asm/pci.h>
 #include <asm/iommu.h>
-#include <asm/ppcdebug.h>
 #include <asm/btext.h>
 #include <asm/sections.h>
 #include <asm/machdep.h>

arch/ppc64/kernel/udbg.c

@@ -10,12 +10,10 @@
  */
 
 #include <stdarg.h>
-#define WANT_PPCDBG_TAB /* Only defined here */
 #include <linux/config.h>
 #include <linux/types.h>
 #include <linux/sched.h>
 #include <linux/console.h>
-#include <asm/ppcdebug.h>
 #include <asm/processor.h>
 
 void (*udbg_putc)(unsigned char c);
@@ -89,59 +87,6 @@ void udbg_printf(const char *fmt, ...)
 	va_end(args);
 }
 
-/* PPCDBG stuff */
-
-u64 ppc64_debug_switch;
-
-/* Special print used by PPCDBG() macro */
-void udbg_ppcdbg(unsigned long debug_flags, const char *fmt, ...)
-{
-	unsigned long active_debugs = debug_flags & ppc64_debug_switch;
-
-	if (active_debugs) {
-		va_list ap;
-		unsigned char buf[UDBG_BUFSIZE];
-		unsigned long i, len = 0;
-
-		for (i=0; i < PPCDBG_NUM_FLAGS; i++) {
-			if (((1U << i) & active_debugs) && 
-			    trace_names[i]) {
-				len += strlen(trace_names[i]); 
-				udbg_puts(trace_names[i]);
-				break;
-			}
-		}
-
-		snprintf(buf, UDBG_BUFSIZE, " [%s]: ", current->comm);
-		len += strlen(buf); 
-		udbg_puts(buf);
-
-		while (len < 18) {
-			udbg_puts(" ");
-			len++;
-		}
-
-		va_start(ap, fmt);
-		vsnprintf(buf, UDBG_BUFSIZE, fmt, ap);
-		udbg_puts(buf);
-		va_end(ap);
-	}
-}
-
-unsigned long udbg_ifdebug(unsigned long flags)
-{
-	return (flags & ppc64_debug_switch);
-}
-
-/*
- * Initialize the PPCDBG state.  Called before relocation has been enabled.
- */
-void __init ppcdbg_initialize(void)
-{
-	ppc64_debug_switch = PPC_DEBUG_DEFAULT; /* | PPCDBG_BUSWALK | */
-	/* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */;
-}
-
 /*
  * Early boot console based on udbg
  */

include/asm-ppc64/ppcdebug.h

@@ -1,108 +0,0 @@
-#ifndef __PPCDEBUG_H
-#define __PPCDEBUG_H
-/********************************************************************
- * Author: Adam Litke, IBM Corp
- * (c) 2001
- *
- * This file contains definitions and macros for a runtime debugging
- * system for ppc64 (This should also work on 32 bit with a few    
- * adjustments.                                                   
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <asm/udbg.h>
-#include <stdarg.h>
-
-#define PPCDBG_BITVAL(X)     ((1UL)<<((unsigned long)(X)))
-
-/* Defined below are the bit positions of various debug flags in the
- * ppc64_debug_switch variable.
- * -- When adding new values, please enter them into trace names below -- 
- *
- * Values 62 & 63 can be used to stress the hardware page table management
- * code.  They must be set statically, any attempt to change them dynamically
- * would be a very bad idea.
- */
-#define PPCDBG_MMINIT        PPCDBG_BITVAL(0)
-#define PPCDBG_MM            PPCDBG_BITVAL(1)
-#define PPCDBG_SYS32         PPCDBG_BITVAL(2)
-#define PPCDBG_SYS32NI       PPCDBG_BITVAL(3)
-#define PPCDBG_SYS32X	     PPCDBG_BITVAL(4)
-#define PPCDBG_SYS32M	     PPCDBG_BITVAL(5)
-#define PPCDBG_SYS64         PPCDBG_BITVAL(6)
-#define PPCDBG_SYS64NI       PPCDBG_BITVAL(7)
-#define PPCDBG_SYS64X	     PPCDBG_BITVAL(8)
-#define PPCDBG_SIGNAL        PPCDBG_BITVAL(9)
-#define PPCDBG_SIGNALXMON    PPCDBG_BITVAL(10)
-#define PPCDBG_BINFMT32      PPCDBG_BITVAL(11)
-#define PPCDBG_BINFMT64      PPCDBG_BITVAL(12)
-#define PPCDBG_BINFMTXMON    PPCDBG_BITVAL(13)
-#define PPCDBG_BINFMT_32ADDR PPCDBG_BITVAL(14)
-#define PPCDBG_ALIGNFIXUP    PPCDBG_BITVAL(15)
-#define PPCDBG_TCEINIT       PPCDBG_BITVAL(16)
-#define PPCDBG_TCE           PPCDBG_BITVAL(17)
-#define PPCDBG_PHBINIT       PPCDBG_BITVAL(18)
-#define PPCDBG_SMP           PPCDBG_BITVAL(19)
-#define PPCDBG_BOOT          PPCDBG_BITVAL(20)
-#define PPCDBG_BUSWALK       PPCDBG_BITVAL(21)
-#define PPCDBG_PROM	     PPCDBG_BITVAL(22)
-#define PPCDBG_RTAS	     PPCDBG_BITVAL(23)
-#define PPCDBG_HTABSTRESS    PPCDBG_BITVAL(62)
-#define PPCDBG_HTABSIZE      PPCDBG_BITVAL(63)
-#define PPCDBG_NONE          (0UL)
-#define PPCDBG_ALL           (0xffffffffUL)
-
-/* The default initial value for the debug switch */
-#define PPC_DEBUG_DEFAULT    0 
-/* #define PPC_DEBUG_DEFAULT    PPCDBG_ALL        */
-
-#define PPCDBG_NUM_FLAGS     64
-
-extern u64 ppc64_debug_switch;
-
-#ifdef WANT_PPCDBG_TAB
-/* A table of debug switch names to allow name lookup in xmon 
- * (and whoever else wants it.
- */
-char *trace_names[PPCDBG_NUM_FLAGS] = {
-	/* Known debug names */
-	"mminit", 	"mm",
-	"syscall32", 	"syscall32_ni", "syscall32x",	"syscall32m",
-	"syscall64", 	"syscall64_ni", "syscall64x",
-	"signal",	"signal_xmon",
-	"binfmt32",	"binfmt64",	"binfmt_xmon",	"binfmt_32addr",
-	"alignfixup",   "tceinit",      "tce",          "phb_init",     
-	"smp",          "boot",         "buswalk",	"prom",
-	"rtas"
-};
-#else
-extern char *trace_names[64];
-#endif /* WANT_PPCDBG_TAB */
-
-#ifdef CONFIG_PPCDBG
-/* Macro to conditionally print debug based on debug_switch */
-#define PPCDBG(...) udbg_ppcdbg(__VA_ARGS__)
-
-/* Macro to conditionally call a debug routine based on debug_switch */
-#define PPCDBGCALL(FLAGS,FUNCTION) ifppcdebug(FLAGS) FUNCTION
-
-/* Macros to test for debug states */
-#define ifppcdebug(FLAGS) if (udbg_ifdebug(FLAGS))
-#define ppcdebugset(FLAGS) (udbg_ifdebug(FLAGS))
-#define PPCDBG_BINFMT (test_thread_flag(TIF_32BIT) ? PPCDBG_BINFMT32 : PPCDBG_BINFMT64)
-
-#else
-#define PPCDBG(...) do {;} while (0)
-#define PPCDBGCALL(FLAGS,FUNCTION) do {;} while (0)
-#define ifppcdebug(...) if (0)
-#define ppcdebugset(FLAGS) (0)
-#endif /* CONFIG_PPCDBG */
-
-#endif /*__PPCDEBUG_H */

include/asm-ppc64/udbg.h

@@ -23,9 +23,6 @@ extern int udbg_read(char *buf, int buflen);
 
 extern void register_early_udbg_console(void);
 extern void udbg_printf(const char *fmt, ...);
-extern void udbg_ppcdbg(unsigned long flags, const char *fmt, ...);
-extern unsigned long udbg_ifdebug(unsigned long flags);
-extern void __init ppcdbg_initialize(void);
 
 extern void udbg_init_uart(void __iomem *comport, unsigned int speed);