Staging: w35und: use gotos for error handling

The driver code uses do { } while (0) together with the break statement to
emulate gotos for error handling. Fix that up by using the goto statement
instead.

Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/winbond/linux/wb35rx.c

@@ -35,51 +35,50 @@ void Wb35Rx(  phw_data_t pHwData )
 	//
 	// Issuing URB
 	//
-	do {
-		if (pHwData->SurpriseRemove || pHwData->HwStop)
-			break;
+	if (pHwData->SurpriseRemove || pHwData->HwStop)
+		goto error;
 
-		if (pWb35Rx->rx_halt)
-			break;
+	if (pWb35Rx->rx_halt)
+		goto error;
 
-		// Get RxBuffer's ID
-		RxBufferId = pWb35Rx->RxBufferId;
-		if (!pWb35Rx->RxOwner[RxBufferId]) {
-			// It's impossible to run here.
-			#ifdef _PE_RX_DUMP_
-			WBDEBUG(("Rx driver fifo unavailable\n"));
-			#endif
-			break;
-		}
+	// Get RxBuffer's ID
+	RxBufferId = pWb35Rx->RxBufferId;
+	if (!pWb35Rx->RxOwner[RxBufferId]) {
+		// It's impossible to run here.
+		#ifdef _PE_RX_DUMP_
+		WBDEBUG(("Rx driver fifo unavailable\n"));
+		#endif
+		goto error;
+	}
 
-		// Update buffer point, then start to bulkin the data from USB
-		pWb35Rx->RxBufferId++;
-		pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER;
+	// Update buffer point, then start to bulkin the data from USB
+	pWb35Rx->RxBufferId++;
+	pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER;
 
-		pWb35Rx->CurrentRxBufferId = RxBufferId;
+	pWb35Rx->CurrentRxBufferId = RxBufferId;
 
-		if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) {
-			printk("w35und: Rx memory alloc failed\n");
-			break;
-		}
-		pRxBufferAddress = pWb35Rx->pDRx;
+	if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) {
+		printk("w35und: Rx memory alloc failed\n");
+		goto error;
+	}
+	pRxBufferAddress = pWb35Rx->pDRx;
 
-		usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev,
-				  usb_rcvbulkpipe(pHwData->WbUsb.udev, 3),
-				  pRxBufferAddress, MAX_USB_RX_BUFFER,
-				  Wb35Rx_Complete, pHwData);
+	usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev,
+			  usb_rcvbulkpipe(pHwData->WbUsb.udev, 3),
+			  pRxBufferAddress, MAX_USB_RX_BUFFER,
+			  Wb35Rx_Complete, pHwData);
 
-		pWb35Rx->EP3vm_state = VM_RUNNING;
+	pWb35Rx->EP3vm_state = VM_RUNNING;
 
-		retv = wb_usb_submit_urb(pUrb);
+	retv = wb_usb_submit_urb(pUrb);
 
-		if (retv != 0) {
-			printk("Rx URB sending error\n");
-			break;
-		}
-		return;
-	} while(FALSE);
+	if (retv != 0) {
+		printk("Rx URB sending error\n");
+		goto error;
+	}
+	return;
 
+error:
 	// VM stop
 	pWb35Rx->EP3vm_state = VM_STOP;
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter );
@@ -99,65 +98,63 @@ void Wb35Rx_Complete(PURB pUrb)
 	pWb35Rx->EP3vm_state = VM_COMPLETED;
 	pWb35Rx->EP3VM_status = pUrb->status;//Store the last result of Irp
 
-	do {
-		RxBufferId = pWb35Rx->CurrentRxBufferId;
+	RxBufferId = pWb35Rx->CurrentRxBufferId;
 
-		pRxBufferAddress = pWb35Rx->pDRx;
-		BulkLength = (u16)pUrb->actual_length;
+	pRxBufferAddress = pWb35Rx->pDRx;
+	BulkLength = (u16)pUrb->actual_length;
 
-		// The IRP is completed
-		pWb35Rx->EP3vm_state = VM_COMPLETED;
+	// The IRP is completed
+	pWb35Rx->EP3vm_state = VM_COMPLETED;
 
-		if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid
-			break;
+	if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid
+		goto error;
 
-		if (pWb35Rx->rx_halt)
-			break;
+	if (pWb35Rx->rx_halt)
+		goto error;
 
-		// Start to process the data only in successful condition
-		pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver
-		R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
+	// Start to process the data only in successful condition
+	pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver
+	R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress);
 
-		// The URB is completed, check the result
-		if (pWb35Rx->EP3VM_status != 0) {
-			#ifdef _PE_USB_STATE_DUMP_
-			WBDEBUG(("EP3 IoCompleteRoutine return error\n"));
-			DebugUsbdStatusInformation( pWb35Rx->EP3VM_status );
-			#endif
-			pWb35Rx->EP3vm_state = VM_STOP;
-			break;
-		}
+	// The URB is completed, check the result
+	if (pWb35Rx->EP3VM_status != 0) {
+		#ifdef _PE_USB_STATE_DUMP_
+		WBDEBUG(("EP3 IoCompleteRoutine return error\n"));
+		DebugUsbdStatusInformation( pWb35Rx->EP3VM_status );
+		#endif
+		pWb35Rx->EP3vm_state = VM_STOP;
+		goto error;
+	}
 
-		// 20060220 For recovering. check if operating in single USB mode
-		if (!HAL_USB_MODE_BURST(pHwData)) {
-			SizeCheck = R00.R00_receive_byte_count;  //20060926 anson's endian
-			if ((SizeCheck & 0x03) > 0)
-				SizeCheck -= 4;
-			SizeCheck = (SizeCheck + 3) & ~0x03;
-			SizeCheck += 12; // 8 + 4 badbeef
-			if ((BulkLength > 1600) ||
-				(SizeCheck > 1600) ||
-				(BulkLength != SizeCheck) ||
-				(BulkLength == 0)) { // Add for fail Urb
-				pWb35Rx->EP3vm_state = VM_STOP;
-				pWb35Rx->Ep3ErrorCount2++;
-			}
+	// 20060220 For recovering. check if operating in single USB mode
+	if (!HAL_USB_MODE_BURST(pHwData)) {
+		SizeCheck = R00.R00_receive_byte_count;  //20060926 anson's endian
+		if ((SizeCheck & 0x03) > 0)
+			SizeCheck -= 4;
+		SizeCheck = (SizeCheck + 3) & ~0x03;
+		SizeCheck += 12; // 8 + 4 badbeef
+		if ((BulkLength > 1600) ||
+			(SizeCheck > 1600) ||
+			(BulkLength != SizeCheck) ||
+			(BulkLength == 0)) { // Add for fail Urb
+			pWb35Rx->EP3vm_state = VM_STOP;
+			pWb35Rx->Ep3ErrorCount2++;
 		}
+	}
 
-		// Indicating the receiving data
-		pWb35Rx->ByteReceived += BulkLength;
-		pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength;
-
-		if (!pWb35Rx->RxOwner[ RxBufferId ])
-			Wb35Rx_indicate(pHwData);
+	// Indicating the receiving data
+	pWb35Rx->ByteReceived += BulkLength;
+	pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength;
 
-		kfree(pWb35Rx->pDRx);
-		// Do the next receive
-		Wb35Rx(pHwData);
-		return;
+	if (!pWb35Rx->RxOwner[ RxBufferId ])
+		Wb35Rx_indicate(pHwData);
 
-	} while(FALSE);
+	kfree(pWb35Rx->pDRx);
+	// Do the next receive
+	Wb35Rx(pHwData);
+	return;
 
+error:
 	pWb35Rx->RxOwner[ RxBufferId ] = 1; // Set the owner to hardware
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter );
 	pWb35Rx->EP3vm_state = VM_STOP;

drivers/staging/winbond/linux/wb35tx.c

@@ -100,25 +100,24 @@ void Wb35Tx_complete(struct urb * pUrb)
 	pWb35Tx->TxSendIndex++;
 	pWb35Tx->TxSendIndex %= MAX_USB_TX_BUFFER_NUMBER;
 
-	do {
-		if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove
-			break;
+	if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove
+		goto error;
 
-		if (pWb35Tx->tx_halt)
-			break;
+	if (pWb35Tx->tx_halt)
+		goto error;
 
-		// The URB is completed, check the result
-		if (pWb35Tx->EP4VM_status != 0) {
-			printk("URB submission failed\n");
-			pWb35Tx->EP4vm_state = VM_STOP;
-			break; // Exit while(FALSE);
-		}
+	// The URB is completed, check the result
+	if (pWb35Tx->EP4VM_status != 0) {
+		printk("URB submission failed\n");
+		pWb35Tx->EP4vm_state = VM_STOP;
+		goto error;
+	}
 
-		Mds_Tx(Adapter);
-		Wb35Tx(pHwData);
-		return;
-	} while(FALSE);
+	Mds_Tx(Adapter);
+	Wb35Tx(pHwData);
+	return;
 
+error:
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxFireCounter );
 	pWb35Tx->EP4vm_state = VM_STOP;
 }
@@ -228,33 +227,30 @@ void Wb35Tx_EP2VM(phw_data_t pHwData)
 	u32 *	pltmp = (u32 *)pWb35Tx->EP2_buf;
 	int		retv;
 
-	do {
-		if (pHwData->SurpriseRemove || pHwData->HwStop)
-			break;
-
-		if (pWb35Tx->tx_halt)
-			break;
-
-		//
-		// Issuing URB
-		//
-		usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2),
-				  pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32);
+	if (pHwData->SurpriseRemove || pHwData->HwStop)
+		goto error;
 
-		pWb35Tx->EP2vm_state = VM_RUNNING;
-		retv = wb_usb_submit_urb( pUrb );
+	if (pWb35Tx->tx_halt)
+		goto error;
 
-		if(retv < 0) {
-			#ifdef _PE_TX_DUMP_
-			WBDEBUG(("EP2 Tx Irp sending error\n"));
-			#endif
-			break;
-		}
+	//
+	// Issuing URB
+	//
+	usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2),
+			  pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32);
 
-		return;
+	pWb35Tx->EP2vm_state = VM_RUNNING;
+	retv = wb_usb_submit_urb( pUrb );
 
-	} while(FALSE);
+	if (retv < 0) {
+		#ifdef _PE_TX_DUMP_
+		WBDEBUG(("EP2 Tx Irp sending error\n"));
+		#endif
+		goto error;
+	}
 
+	return;
+error:
 	pWb35Tx->EP2vm_state = VM_STOP;
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount );
 }
@@ -275,38 +271,36 @@ void Wb35Tx_EP2VM_complete(struct urb * pUrb)
 	pWb35Tx->EP2vm_state = VM_COMPLETED;
 	pWb35Tx->EP2VM_status = pUrb->status;
 
-	do {
-		// For Linux 2.4. Interrupt will always trigger
-		if( pHwData->SurpriseRemove || pHwData->HwStop ) // Let WbWlanHalt to handle surprise remove
-			break;
-
-		if( pWb35Tx->tx_halt )
-			break;
-
-		//The Urb is completed, check the result
-		if (pWb35Tx->EP2VM_status != 0) {
-			WBDEBUG(("EP2 IoCompleteRoutine return error\n"));
-			pWb35Tx->EP2vm_state= VM_STOP;
-			break; // Exit while(FALSE);
-		}
-
-		// Update the Tx result
-		InterruptInLength = pUrb->actual_length;
-		// Modify for minimum memory access and DWORD alignment.
-		T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0]
-		InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable
-		InterruptInLength >>= 2; // InterruptInLength/4
-		for (i=1; i<=InterruptInLength; i++) {
-			T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24);
-
-			TSTATUS.value = T02.value;  //20061009 anson's endian
-			Mds_SendComplete( Adapter, &TSTATUS );
-			T02.value = cpu_to_le32(pltmp[i]) >> 8;
-		}
-
-		return;
-	} while(FALSE);
+	// For Linux 2.4. Interrupt will always trigger
+	if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove
+		goto error;
+
+	if (pWb35Tx->tx_halt)
+		goto error;
+
+	//The Urb is completed, check the result
+	if (pWb35Tx->EP2VM_status != 0) {
+		WBDEBUG(("EP2 IoCompleteRoutine return error\n"));
+		pWb35Tx->EP2vm_state= VM_STOP;
+		goto error;
+	}
 
+	// Update the Tx result
+	InterruptInLength = pUrb->actual_length;
+	// Modify for minimum memory access and DWORD alignment.
+	T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0]
+	InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable
+	InterruptInLength >>= 2; // InterruptInLength/4
+	for (i = 1; i <= InterruptInLength; i++) {
+		T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24);
+
+		TSTATUS.value = T02.value;  //20061009 anson's endian
+		Mds_SendComplete( Adapter, &TSTATUS );
+		T02.value = cpu_to_le32(pltmp[i]) >> 8;
+	}
+
+	return;
+error:
 	OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount );
 	pWb35Tx->EP2vm_state = VM_STOP;
 }

drivers/staging/winbond/linux/wbusb.c

@@ -218,114 +218,111 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
 
 	printk("[w35und]wb35_probe ->\n");
 
-	do {
-		for (i=0; i<(sizeof(Id_Table)/sizeof(struct usb_device_id)); i++ ) {
-			if ((udev->descriptor.idVendor == Id_Table[i].idVendor) &&
-				(udev->descriptor.idProduct == Id_Table[i].idProduct)) {
-				printk("[w35und]Found supported hardware\n");
-				break;
-			}
-		}
-		if ((i == (sizeof(Id_Table)/sizeof(struct usb_device_id)))) {
-			#ifdef _PE_USB_INI_DUMP_
-			WBDEBUG(("[w35und] This is not the one we are interested about\n"));
-			#endif
-			return -ENODEV;
+	for (i=0; i<(sizeof(Id_Table)/sizeof(struct usb_device_id)); i++ ) {
+		if ((udev->descriptor.idVendor == Id_Table[i].idVendor) &&
+			(udev->descriptor.idProduct == Id_Table[i].idProduct)) {
+			printk("[w35und]Found supported hardware\n");
+			break;
 		}
+	}
 
-		// 20060630.2 Check the device if it already be opened
-		ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
-				      0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
-				      0x0, 0x400, &ltmp, 4, HZ*100 );
-		if( ret < 0 )
-			break;
+	if ((i == (sizeof(Id_Table)/sizeof(struct usb_device_id)))) {
+		#ifdef _PE_USB_INI_DUMP_
+		WBDEBUG(("[w35und] This is not the one we are interested about\n"));
+		#endif
+		return -ENODEV;
+	}
 
-		ltmp = cpu_to_le32(ltmp);
-		if (ltmp)  // Is already initialized?
-			break;
+	// 20060630.2 Check the device if it already be opened
+	ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ),
+			      0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN,
+			      0x0, 0x400, &ltmp, 4, HZ*100 );
+	if (ret < 0)
+		goto error;
 
+	ltmp = cpu_to_le32(ltmp);
+	if (ltmp)  // Is already initialized?
+		goto error;
 
-		Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL);
+	Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL);
 
-		my_adapter = Adapter;
-		pWbLinux = &Adapter->WbLinux;
-		pWbUsb = &Adapter->sHwData.WbUsb;
-		pWbUsb->udev = udev;
+	my_adapter = Adapter;
+	pWbLinux = &Adapter->WbLinux;
+	pWbUsb = &Adapter->sHwData.WbUsb;
+	pWbUsb->udev = udev;
 
-	        interface = intf->cur_altsetting;
-	        endpoint = &interface->endpoint[0].desc;
+        interface = intf->cur_altsetting;
+        endpoint = &interface->endpoint[0].desc;
 
-		if (endpoint[2].wMaxPacketSize == 512) {
-			printk("[w35und] Working on USB 2.0\n");
-			pWbUsb->IsUsb20 = 1;
-		}
+	if (endpoint[2].wMaxPacketSize == 512) {
+		printk("[w35und] Working on USB 2.0\n");
+		pWbUsb->IsUsb20 = 1;
+	}
 
-		if (!WbWLanInitialize(Adapter)) {
-			printk("[w35und]WbWLanInitialize fail\n");
-			break;
-		}
+	if (!WbWLanInitialize(Adapter)) {
+		printk("[w35und]WbWLanInitialize fail\n");
+		goto error;
+	}
 
-		{
-			struct wbsoft_priv *priv;
-			struct ieee80211_hw *dev;
-			int res;
+	{
+		struct wbsoft_priv *priv;
+		struct ieee80211_hw *dev;
+		int res;
 
-			dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
+		dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops);
 
-			if (!dev) {
-				printk("w35und: ieee80211 alloc failed\n" );
-				BUG();
-			}
+		if (!dev) {
+			printk("w35und: ieee80211 alloc failed\n" );
+			BUG();
+		}
 
-			my_dev = dev;
+		my_dev = dev;
 
-			SET_IEEE80211_DEV(dev, &udev->dev);
-			{
-				phw_data_t pHwData = &Adapter->sHwData;
-				unsigned char		dev_addr[MAX_ADDR_LEN];
-				hal_get_permanent_address(pHwData, dev_addr);
-				SET_IEEE80211_PERM_ADDR(dev, dev_addr);
-			}
+		SET_IEEE80211_DEV(dev, &udev->dev);
+		{
+			phw_data_t pHwData = &Adapter->sHwData;
+			unsigned char		dev_addr[MAX_ADDR_LEN];
+			hal_get_permanent_address(pHwData, dev_addr);
+			SET_IEEE80211_PERM_ADDR(dev, dev_addr);
+		}
 
 
-			dev->extra_tx_headroom = 12;	/* FIXME */
-			dev->flags = 0;
+		dev->extra_tx_headroom = 12;	/* FIXME */
+		dev->flags = 0;
 
-			dev->channel_change_time = 1000;
-//			dev->max_rssi = 100;
+		dev->channel_change_time = 1000;
+//		dev->max_rssi = 100;
 
-			dev->queues = 1;
+		dev->queues = 1;
 
-			static struct ieee80211_supported_band band;
+		static struct ieee80211_supported_band band;
 
-			band.channels = wbsoft_channels;
-			band.n_channels = ARRAY_SIZE(wbsoft_channels);
-			band.bitrates = wbsoft_rates;
-			band.n_bitrates = ARRAY_SIZE(wbsoft_rates);
+		band.channels = wbsoft_channels;
+		band.n_channels = ARRAY_SIZE(wbsoft_channels);
+		band.bitrates = wbsoft_rates;
+		band.n_bitrates = ARRAY_SIZE(wbsoft_rates);
 
-			dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band;
+		dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band;
 #if 0
-			wbsoft_modes[0].num_channels = 1;
-			wbsoft_modes[0].channels = wbsoft_channels;
-			wbsoft_modes[0].mode = MODE_IEEE80211B;
-			wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates);
-			wbsoft_modes[0].rates = wbsoft_rates;
-
-			res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]);
-			BUG_ON(res);
+		wbsoft_modes[0].num_channels = 1;
+		wbsoft_modes[0].channels = wbsoft_channels;
+		wbsoft_modes[0].mode = MODE_IEEE80211B;
+		wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates);
+		wbsoft_modes[0].rates = wbsoft_rates;
+
+		res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]);
+		BUG_ON(res);
 #endif
 
-			res = ieee80211_register_hw(dev);
-			BUG_ON(res);
-		}
-
-		usb_set_intfdata( intf, Adapter );
-
-		printk("[w35und] _probe OK\n");
-		return 0;
+		res = ieee80211_register_hw(dev);
+		BUG_ON(res);
+	}
 
-	} while(FALSE);
+	usb_set_intfdata( intf, Adapter );
 
+	printk("[w35und] _probe OK\n");
+	return 0;
+error:
 	return -ENOMEM;
 }
 

drivers/staging/winbond/wblinux.c

@@ -147,114 +147,112 @@ WbWLanInitialize(PADAPTER Adapter)
 	u8		EEPROM_region;
 	u8		HwRadioOff;
 
-	do {
-		//
-		// Setting default value for Linux
-		//
-		Adapter->sLocalPara.region_INF = REGION_AUTO;
-		Adapter->sLocalPara.TxRateMode = RATE_AUTO;
-		psLOCAL->bMacOperationMode = MODE_802_11_BG;	// B/G mode
-		Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
-		Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
-		hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 );
-		Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
-		psLOCAL->bPreambleMode = AUTO_MODE;
-		Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE;
-		pHwData = &Adapter->sHwData;
-		hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
-
-		//
-		// Initial each module and variable
-		//
-		if (!WBLINUX_Initial(Adapter)) {
+	//
+	// Setting default value for Linux
+	//
+	Adapter->sLocalPara.region_INF = REGION_AUTO;
+	Adapter->sLocalPara.TxRateMode = RATE_AUTO;
+	psLOCAL->bMacOperationMode = MODE_802_11_BG;	// B/G mode
+	Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold;
+	Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD;
+	hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 );
+	Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE;
+	psLOCAL->bPreambleMode = AUTO_MODE;
+	Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE;
+	pHwData = &Adapter->sHwData;
+	hal_set_phy_type( pHwData, RF_DECIDE_BY_INF );
+
+	//
+	// Initial each module and variable
+	//
+	if (!WBLINUX_Initial(Adapter)) {
 #ifdef _PE_USB_INI_DUMP_
-			WBDEBUG(("[w35und]WBNDIS initialization failed\n"));
+		WBDEBUG(("[w35und]WBNDIS initialization failed\n"));
 #endif
-			break;
-		}
+		goto error;
+	}
 
-		// Initial Software variable
-		Adapter->sLocalPara.ShutDowned = FALSE;
-
-		//added by ws for wep key error detection
-		Adapter->sLocalPara.bWepKeyError= FALSE;
-		Adapter->sLocalPara.bToSelfPacketReceived = FALSE;
-		Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
-
-		// Initial USB hal
-		InitStep = 1;
-		pHwData = &Adapter->sHwData;
-		if (!hal_init_hardware(pHwData, Adapter))
-			break;
-
-		EEPROM_region = hal_get_region_from_EEPROM( pHwData );
-		if (EEPROM_region != REGION_AUTO)
-			psLOCAL->region = EEPROM_region;
-		else {
-			if (psLOCAL->region_INF != REGION_AUTO)
-				psLOCAL->region = psLOCAL->region_INF;
-			else
-				psLOCAL->region = REGION_USA;	//default setting
-		}
+	// Initial Software variable
+	Adapter->sLocalPara.ShutDowned = FALSE;
+
+	//added by ws for wep key error detection
+	Adapter->sLocalPara.bWepKeyError= FALSE;
+	Adapter->sLocalPara.bToSelfPacketReceived = FALSE;
+	Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
+
+	// Initial USB hal
+	InitStep = 1;
+	pHwData = &Adapter->sHwData;
+	if (!hal_init_hardware(pHwData, Adapter))
+		goto error;
+
+	EEPROM_region = hal_get_region_from_EEPROM( pHwData );
+	if (EEPROM_region != REGION_AUTO)
+		psLOCAL->region = EEPROM_region;
+	else {
+		if (psLOCAL->region_INF != REGION_AUTO)
+			psLOCAL->region = psLOCAL->region_INF;
+		else
+			psLOCAL->region = REGION_USA;	//default setting
+	}
 
-		// Get Software setting flag from hal
-		Adapter->sLocalPara.boAntennaDiversity = FALSE;
-		if (hal_software_set(pHwData) & 0x00000001)
-			Adapter->sLocalPara.boAntennaDiversity = TRUE;
-
-		//
-		// For TS module
-		//
-		InitStep = 2;
-
-		// For MDS module
-		InitStep = 3;
-		Mds_initial(Adapter);
-
-		//=======================================
-		// Initialize the SME, SCAN, MLME, ROAM
-		//=======================================
-		InitStep = 4;
-		InitStep = 5;
-		InitStep = 6;
-
-		// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
-		pMacAddr = Adapter->sLocalPara.ThisMacAddress;
-		pMacAddr2 = Adapter->sLocalPara.PermanentAddress;
-		hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
-		if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal
-		{
-			memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH );
-		} else {
-			// Set the user define MAC address
-			hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress );
-		}
+	// Get Software setting flag from hal
+	Adapter->sLocalPara.boAntennaDiversity = FALSE;
+	if (hal_software_set(pHwData) & 0x00000001)
+		Adapter->sLocalPara.boAntennaDiversity = TRUE;
+
+	//
+	// For TS module
+	//
+	InitStep = 2;
+
+	// For MDS module
+	InitStep = 3;
+	Mds_initial(Adapter);
+
+	//=======================================
+	// Initialize the SME, SCAN, MLME, ROAM
+	//=======================================
+	InitStep = 4;
+	InitStep = 5;
+	InitStep = 6;
+
+	// If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
+	pMacAddr = Adapter->sLocalPara.ThisMacAddress;
+	pMacAddr2 = Adapter->sLocalPara.PermanentAddress;
+	hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM
+	if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal
+	{
+		memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH );
+	} else {
+		// Set the user define MAC address
+		hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress );
+	}
 
-		//get current antenna
-		psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData);
+	//get current antenna
+	psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData);
 #ifdef _PE_STATE_DUMP_
-		WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
+	WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo));
 #endif
-		hal_get_hw_radio_off( pHwData );
+	hal_get_hw_radio_off( pHwData );
 
-		// Waiting for HAL setting OK
-		while (!hal_idle(pHwData))
-			OS_SLEEP(10000);
+	// Waiting for HAL setting OK
+	while (!hal_idle(pHwData))
+		OS_SLEEP(10000);
 
-		MTO_Init(Adapter);
+	MTO_Init(Adapter);
 
-		HwRadioOff = hal_get_hw_radio_off( pHwData );
-		psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff;
+	HwRadioOff = hal_get_hw_radio_off( pHwData );
+	psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff;
 
-		hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) );
+	hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) );
 
-		hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
-		//set a tx power for reference.....
-//		sme_set_tx_power_level(Adapter, 12);	FIXME?
-		return TRUE;
-	}
-	while(FALSE);
+	hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
+	//set a tx power for reference.....
+//	sme_set_tx_power_level(Adapter, 12);	FIXME?
+	return TRUE;
 
+error:
 	switch (InitStep) {
 	case 5:
 	case 4: