Pārlūkot izejas kodu

cpm_uart: Support uart_wait_until_sent()

Set port->fifosize to the software FIFO size, and update the port timeout
when the baud rate is modified. SCC ports have an optional 32 byte hardware
FIFO which is currently not taken into account, as there is no documented way
to check when the FIFO becomes empty.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Laurent Pinchart 17 gadi atpakaļ
vecāks
revīzija
dc32081530
1 mainītis faili ar 6 papildinājumiem un 0 dzēšanām
  1. 6 0
      drivers/serial/cpm_uart/cpm_uart_core.c

+ 6 - 0
drivers/serial/cpm_uart/cpm_uart_core.c

@@ -490,6 +490,11 @@ static void cpm_uart_set_termios(struct uart_port *port,
 		}
 	}
 
+	/*
+	 * Update the timeout
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
 	/*
 	 * Set up parity check flag
 	 */
@@ -938,6 +943,7 @@ static int cpm_uart_init_port(struct device_node *np,
 	pinfo->port.type = PORT_CPM;
 	pinfo->port.ops = &cpm_uart_pops,
 	pinfo->port.iotype = UPIO_MEM;
+	pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize;
 	spin_lock_init(&pinfo->port.lock);
 
 	pinfo->port.irq = of_irq_to_resource(np, 0, NULL);