Merge tag 'samsung-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

From Kukjin Kim:

- Consolidate uncompress subroutines and s5p64x0-uncompress
- Cleanup watchdog support on Samsung to support multiplatform

* tag 'samsung-cleanup-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Use local definitions of watchdog registers
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: S5P64X0: Use common uncompress.h part for plat-samsung
  ARM: SAMSUNG: Consolidate uncompress subroutine

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -729,6 +729,7 @@ config ARCH_S3C64XX
 	select SAMSUNG_CLKSRC
 	select SAMSUNG_GPIOLIB_4BIT
 	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_WDT_RESET
 	select USB_ARCH_HAS_OHCI
 	help
 	  Samsung S3C64XX series based systems
@@ -744,6 +745,7 @@ config ARCH_S5P64X0
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
+	select SAMSUNG_WDT_RESET
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -760,6 +762,7 @@ config ARCH_S5PC100
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
+	select SAMSUNG_WDT_RESET
 	help
 	  Samsung S5PC100 series based systems
 

arch/arm/mach-exynos/include/mach/uncompress.h

@@ -15,9 +15,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/map.h>
-
-volatile u8 *uart_base;
-
 #include <plat/uncompress.h>
 
 static unsigned int __raw_readl(unsigned int ptr)

arch/arm/mach-s3c24xx/Kconfig

@@ -31,6 +31,7 @@ config CPU_S3C2410
 	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
 	select S3C2410_PM if PM
 	select SAMSUNG_HRT
+	select SAMSUNG_WDT_RESET
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -81,6 +82,7 @@ config CPU_S3C2442
 config CPU_S3C244X
 	def_bool y
 	depends on CPU_S3C2440 || CPU_S3C2442
+	select SAMSUNG_WDT_RESET
 
 config CPU_S3C2443
 	bool "SAMSUNG S3C2443"

arch/arm/mach-s3c24xx/include/mach/uncompress.h

@@ -49,6 +49,9 @@ static void arch_detect_cpu(void)
 		fifo_mask = S3C2410_UFSTAT_TXMASK;
 		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
 	}
+
+	uart_base = (volatile u8 *) S3C_PA_UART +
+		(S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
 }
 
 #endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s3c24xx/s3c2410.c

@@ -138,6 +138,7 @@ void __init s3c2410_init_clocks(int xtal)
 	s3c2410_baseclk_add();
 	s3c24xx_register_clock(&s3c2410_armclk);
 	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 struct bus_type s3c2410_subsys = {
@@ -201,7 +202,7 @@ void s3c2410_restart(char mode, const char *cmd)
 		soft_restart(0);
 	}
 
-	arch_wdt_reset();
+	samsung_wdt_reset();
 
 	/* we'll take a jump through zero as a poor second */
 	soft_restart(0);

arch/arm/mach-s3c24xx/s3c244x.c

@@ -133,6 +133,7 @@ void __init s3c244x_init_clocks(int xtal)
 	s3c24xx_register_baseclocks(xtal);
 	s3c244x_setup_clocks();
 	s3c2410_baseclk_add();
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 /* Since the S3C2442 and S3C2440 share items, put both subsystems here */
@@ -202,7 +203,7 @@ void s3c244x_restart(char mode, const char *cmd)
 	if (mode == 's')
 		soft_restart(0);
 
-	arch_wdt_reset();
+	samsung_wdt_reset();
 
 	/* we'll take a jump through zero as a poor second */
 	soft_restart(0);

arch/arm/mach-s3c64xx/common.c

@@ -183,6 +183,12 @@ core_initcall(s3c64xx_dev_init);
 
 void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 {
+	/*
+	 * FIXME: there is no better place to put this at the moment
+	 * (samsung_wdt_reset_init needs clocks)
+	 */
+	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
+
 	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
 
 	/* initialise the pair of VICs */
@@ -378,7 +384,7 @@ arch_initcall(s3c64xx_init_irq_eint);
 void s3c64xx_restart(char mode, const char *cmd)
 {
 	if (mode != 's')
-		arch_wdt_reset();
+		samsung_wdt_reset();
 
 	/* if all else fails, or mode was for soft, jump to 0 */
 	soft_restart(0);

arch/arm/mach-s3c64xx/include/mach/uncompress.h

@@ -23,6 +23,9 @@ static void arch_detect_cpu(void)
 	/* we do not need to do any cpu detection here at the moment. */
 	fifo_mask = S3C2440_UFSTAT_TXMASK;
 	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+
+	uart_base = (volatile u8 *)S3C_PA_UART +
+		(S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
 }
 
 #endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s5p64x0/common.c

@@ -173,6 +173,8 @@ void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
 	s5p_init_cpu(S5P64X0_SYS_ID);
 
 	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
+
 }
 
 void __init s5p6440_map_io(void)
@@ -440,7 +442,7 @@ arch_initcall(s5p64x0_init_irq_eint);
 void s5p64x0_restart(char mode, const char *cmd)
 {
 	if (mode != 's')
-		arch_wdt_reset();
+		samsung_wdt_reset();
 
 	soft_restart(0);
 }

arch/arm/mach-s5p64x0/include/mach/uncompress.h

@@ -14,171 +14,21 @@
 #define __ASM_ARCH_UNCOMPRESS_H
 
 #include <mach/map.h>
+#include <plat/uncompress.h>
 
-/*
- * cannot use commonly <plat/uncompress.h>
- * because uart base of S5P6440 and S5P6450 is different
- */
-
-typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
-
-/* uart setup */
-
-unsigned int fifo_mask;
-unsigned int fifo_max;
-
-/* forward declerations */
-
-static void arch_detect_cpu(void);
-
-/* defines for UART registers */
-
-#include <plat/regs-serial.h>
-#include <plat/regs-watchdog.h>
-
-/* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
-
-/* how many bytes we allow into the FIFO at a time in FIFO mode */
-#define FIFO_MAX	 (14)
-
-unsigned long uart_base;
-
-static __inline__ void get_uart_base(void)
+static void arch_detect_cpu(void)
 {
 	unsigned int chipid;
 
 	chipid = *(const volatile unsigned int __force *) 0xE0100118;
 
-	uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
-
 	if ((chipid & 0xff000) == 0x50000)
-		uart_base += 0xEC800000;
+		uart_base = S5P6450_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
 	else
-		uart_base += 0xEC000000;
-}
-
-static __inline__ void uart_wr(unsigned int reg, unsigned int val)
-{
-	volatile unsigned int *ptr;
-
-	get_uart_base();
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	*ptr = val;
-}
-
-static __inline__ unsigned int uart_rd(unsigned int reg)
-{
-	volatile unsigned int *ptr;
-
-	get_uart_base();
-	ptr = (volatile unsigned int *)(reg + uart_base);
-	return *ptr;
-}
-
-/*
- * we can deal with the case the UARTs are being run
- * in FIFO mode, so that we don't hold up our execution
- * waiting for tx to happen...
- */
-
-static void putc(int ch)
-{
-	if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
-		int level;
-
-		while (1) {
-			level = uart_rd(S3C2410_UFSTAT);
-			level &= fifo_mask;
-
-			if (level < fifo_max)
-				break;
-		}
-
-	} else {
-		/* not using fifos */
-
-		while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
-			barrier();
-	}
+		uart_base = S5P6440_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
 
-	/* write byte to transmission register */
-	uart_wr(S3C2410_UTXH, ch);
-}
-
-static inline void flush(void)
-{
-}
-
-#define __raw_writel(d, ad)			\
-	do {							\
-		*((volatile unsigned int __force *)(ad)) = (d); \
-	} while (0)
-
-
-#ifdef CONFIG_S3C_BOOT_ERROR_RESET
-
-static void arch_decomp_error(const char *x)
-{
-	putstr("\n\n");
-	putstr(x);
-	putstr("\n\n -- System resetting\n");
-
-	__raw_writel(0x4000, S3C2410_WTDAT);
-	__raw_writel(0x4000, S3C2410_WTCNT);
-	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
-
-	while(1);
-}
-
-#define arch_error arch_decomp_error
-#endif
-
-#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
-static inline void arch_enable_uart_fifo(void)
-{
-	u32 fifocon = uart_rd(S3C2410_UFCON);
-
-	if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
-		fifocon |= S3C2410_UFCON_RESETBOTH;
-		uart_wr(S3C2410_UFCON, fifocon);
-
-		/* wait for fifo reset to complete */
-		while (1) {
-			fifocon = uart_rd(S3C2410_UFCON);
-			if (!(fifocon & S3C2410_UFCON_RESETBOTH))
-				break;
-		}
-	}
-}
-#else
-#define arch_enable_uart_fifo() do { } while(0)
-#endif
-
-static void arch_decomp_setup(void)
-{
-	/*
-	 * we may need to setup the uart(s) here if we are not running
-	 * on an BAST... the BAST will have left the uarts configured
-	 * after calling linux.
-	 */
-
-	arch_detect_cpu();
-
-	/*
-	 * Enable the UART FIFOs if they where not enabled and our
-	 * configuration says we should turn them on.
-	 */
-
-	arch_enable_uart_fifo();
-}
-
-
-
-static void arch_detect_cpu(void)
-{
-	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
 }
 
 #endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s5pc100/common.c

@@ -178,6 +178,7 @@ void __init s5pc100_init_clocks(int xtal)
 	s5p_register_clocks(xtal);
 	s5pc100_register_clocks();
 	s5pc100_setup_clocks();
+	samsung_wdt_reset_init(S3C_VA_WATCHDOG);
 }
 
 void __init s5pc100_init_irq(void)
@@ -219,7 +220,7 @@ void __init s5pc100_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 void s5pc100_restart(char mode, const char *cmd)
 {
 	if (mode != 's')
-		arch_wdt_reset();
+		samsung_wdt_reset();
 
 	soft_restart(0);
 }

arch/arm/mach-s5pc100/include/mach/uncompress.h

@@ -23,6 +23,8 @@ static void arch_detect_cpu(void)
 	/* we do not need to do any cpu detection here at the moment. */
 	fifo_mask = S3C2440_UFSTAT_TXMASK;
 	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+
+	uart_base = (volatile u8 *)S5P_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
 }
 
 #endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/mach-s5pv210/include/mach/uncompress.h

@@ -21,6 +21,8 @@ static void arch_detect_cpu(void)
 	/* we do not need to do any cpu detection here at the moment. */
 	fifo_mask = S5PV210_UFSTAT_TXMASK;
 	fifo_max = 63 << S5PV210_UFSTAT_TXSHIFT;
+
+	uart_base = (volatile u8 *)S5P_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
 }
 
 #endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/plat-samsung/Kconfig

@@ -475,6 +475,12 @@ config SAMSUNG_WAKEMASK
 	  and above. This code allows a set of interrupt to wakeup-mask
 	  mappings. See <plat/wakeup-mask.h>
 
+config SAMSUNG_WDT_RESET
+	bool
+	help
+	  Compile support for system restart by triggering watchdog reset.
+	  Used on SoCs that do not provide dedicated reset control.
+
 config S5P_PM
 	bool
 	help

arch/arm/plat-samsung/Makefile

@@ -56,6 +56,7 @@ obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
+obj-$(CONFIG_SAMSUNG_WDT_RESET)	+= watchdog-reset.o
 
 obj-$(CONFIG_S5P_PM)		+= s5p-pm.o s5p-irq-pm.o
 obj-$(CONFIG_S5P_SLEEP)		+= s5p-sleep.o

arch/arm/plat-samsung/include/plat/regs-watchdog.h

@@ -1,41 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-watchdog.h
- *
- * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Watchdog timer control
-*/
-
-
-#ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H
-
-#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
-
-#define S3C2410_WTCON	   S3C_WDOGREG(0x00)
-#define S3C2410_WTDAT	   S3C_WDOGREG(0x04)
-#define S3C2410_WTCNT	   S3C_WDOGREG(0x08)
-
-/* the watchdog can either generate a reset pulse, or an
- * interrupt.
- */
-
-#define S3C2410_WTCON_RSTEN   (0x01)
-#define S3C2410_WTCON_INTEN   (1<<2)
-#define S3C2410_WTCON_ENABLE  (1<<5)
-
-#define S3C2410_WTCON_DIV16   (0<<3)
-#define S3C2410_WTCON_DIV32   (1<<3)
-#define S3C2410_WTCON_DIV64   (2<<3)
-#define S3C2410_WTCON_DIV128  (3<<3)
-
-#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
-#define S3C2410_WTCON_PRESCALE_MASK (0xff00)
-
-#endif /* __ASM_ARCH_REGS_WATCHDOG_H */
-
-

arch/arm/plat-samsung/include/plat/uncompress.h

@@ -21,6 +21,8 @@ typedef unsigned int upf_t;	/* cannot include linux/serial_core.h */
 unsigned int fifo_mask;
 unsigned int fifo_max;
 
+volatile u8 *uart_base;
+
 /* forward declerations */
 
 static void arch_detect_cpu(void);
@@ -28,19 +30,24 @@ static void arch_detect_cpu(void);
 /* defines for UART registers */
 
 #include <plat/regs-serial.h>
-#include <plat/regs-watchdog.h>
 
 /* working in physical space... */
-#undef S3C2410_WDOGREG
-#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+#define S3C_WDOGREG(x)	((S3C_PA_WDT + (x)))
+
+#define S3C2410_WTCON	S3C_WDOGREG(0x00)
+#define S3C2410_WTDAT	S3C_WDOGREG(0x04)
+#define S3C2410_WTCNT	S3C_WDOGREG(0x08)
+
+#define S3C2410_WTCON_RSTEN	(1 << 0)
+#define S3C2410_WTCON_ENABLE	(1 << 5)
+
+#define S3C2410_WTCON_DIV128	(3 << 3)
+
+#define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
 
 /* how many bytes we allow into the FIFO at a time in FIFO mode */
 #define FIFO_MAX	 (14)
 
-#ifdef S3C_PA_UART
-#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
-#endif
-
 static __inline__ void
 uart_wr(unsigned int reg, unsigned int val)
 {

arch/arm/plat-samsung/include/plat/watchdog-reset.h

@@ -10,37 +10,11 @@
  * published by the Free Software Foundation.
 */
 
-#include <plat/clock.h>
-#include <plat/regs-watchdog.h>
-#include <mach/map.h>
+#ifndef __PLAT_SAMSUNG_WATCHDOG_RESET_H
+#define __PLAT_SAMSUNG_WATCHDOG_RESET_H
 
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+extern void samsung_wdt_reset(void);
+extern void samsung_wdt_reset_of_init(void);
+extern void samsung_wdt_reset_init(void __iomem *base);
 
-static inline void arch_wdt_reset(void)
-{
-	printk("arch_reset: attempting watchdog reset\n");
-
-	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-
-	if (!IS_ERR(s3c2410_wdtclk))
-		clk_enable(s3c2410_wdtclk);
-
-	/* put initial values into count and data */
-	__raw_writel(0x80, S3C2410_WTCNT);
-	__raw_writel(0x80, S3C2410_WTDAT);
-
-	/* set the watchdog to go and reset... */
-	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
-	/* wait for reset to assert... */
-	mdelay(500);
-
-	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
-	/* delay to allow the serial port to show the message */
-	mdelay(50);
-}
+#endif /* __PLAT_SAMSUNG_WATCHDOG_RESET_H */

arch/arm/plat-samsung/watchdog-reset.c

@@ -0,0 +1,97 @@
+/* arch/arm/plat-samsung/watchdog-reset.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Coyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Watchdog reset support for Samsung SoCs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define S3C2410_WTCON			0x00
+#define S3C2410_WTDAT			0x04
+#define S3C2410_WTCNT			0x08
+
+#define S3C2410_WTCON_ENABLE		(1 << 5)
+#define S3C2410_WTCON_DIV16		(0 << 3)
+#define S3C2410_WTCON_RSTEN		(1 << 0)
+#define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
+
+static void __iomem *wdt_base;
+static struct clk *wdt_clock;
+
+void samsung_wdt_reset(void)
+{
+	if (!wdt_base) {
+		pr_err("%s: wdt reset not initialized\n", __func__);
+		/* delay to allow the serial port to show the message */
+		mdelay(50);
+		return;
+	}
+
+	if (!IS_ERR(wdt_clock))
+		clk_prepare_enable(wdt_clock);
+
+	/* disable watchdog, to be safe  */
+	__raw_writel(0, wdt_base + S3C2410_WTCON);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, wdt_base + S3C2410_WTCNT);
+	__raw_writel(0x80, wdt_base + S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 |
+			S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20),
+			wdt_base + S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	pr_err("Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id s3c2410_wdt_match[] = {
+	{ .compatible = "samsung,s3c2410-wdt" },
+	{},
+};
+
+void __init samsung_wdt_reset_of_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, s3c2410_wdt_match);
+	if (!np) {
+		pr_err("%s: failed to find watchdog node\n", __func__);
+		return;
+	}
+
+	wdt_base = of_iomap(np, 0);
+	if (!wdt_base) {
+		pr_err("%s: failed to map watchdog registers\n", __func__);
+		return;
+	}
+
+	wdt_clock = of_clk_get(np, 0);
+}
+#endif
+
+void __init samsung_wdt_reset_init(void __iomem *base)
+{
+	wdt_base = base;
+	wdt_clock = clk_get(NULL, "watchdog");
+}

drivers/watchdog/s3c2410_wdt.c

@@ -42,12 +42,21 @@
 #include <linux/err.h>
 #include <linux/of.h>
 
-#include <mach/map.h>
+#define S3C2410_WTCON		0x00
+#define S3C2410_WTDAT		0x04
+#define S3C2410_WTCNT		0x08
 
-#undef S3C_VA_WATCHDOG
-#define S3C_VA_WATCHDOG (0)
+#define S3C2410_WTCON_RSTEN	(1 << 0)
+#define S3C2410_WTCON_INTEN	(1 << 2)
+#define S3C2410_WTCON_ENABLE	(1 << 5)
 
-#include <plat/regs-watchdog.h>
+#define S3C2410_WTCON_DIV16	(0 << 3)
+#define S3C2410_WTCON_DIV32	(1 << 3)
+#define S3C2410_WTCON_DIV64	(2 << 3)
+#define S3C2410_WTCON_DIV128	(3 << 3)
+
+#define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
+#define S3C2410_WTCON_PRESCALE_MASK	(0xff << 8)
 
 #define CONFIG_S3C2410_WATCHDOG_ATBOOT		(0)
 #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME	(15)