Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (71 commits)
  MIPS: Lasat: Fix botched changes to sysctl code.
  RTC: rtc-cmos.c: Fix warning on MIPS
  MIPS: Cleanup random differences beween lmo and Linus' kernel.
  MIPS: No longer hardwire CONFIG_EMBEDDED to y
  MIPS: Fix and enhance built-in kernel command line
  MIPS: eXcite: Remove platform.
  MIPS: Loongson: Cleanups of serial port support
  MIPS: Lemote 2F: Suspend CS5536 MFGPT Timer
  MIPS: Excite: move iodev_remove to .devexit.text
  MIPS: Lasat: Convert to proc_fops / seq_file
  MIPS: Cleanup signal code initialization
  MIPS: Modularize COP2 handling
  MIPS: Move EARLY_PRINTK to Kconfig.debug
  MIPS: Yeeloong 2F: Cleanup reset logic using the new ec_write function
  MIPS: Yeeloong 2F: Add LID open event as the wakeup event
  MIPS: Yeeloong 2F: Add basic EC operations
  MIPS: Move several variables from .bss to .init.data
  MIPS: Tracing: Make function graph tracer work with -mmcount-ra-address
  MIPS: Tracing: Reserve $12(t0) for mcount-ra-address of gcc 4.5
  MIPS: Tracing: Make ftrace for MIPS work without -fno-omit-frame-pointer
  ...

arch/mips/Kconfig

@@ -5,9 +5,12 @@ config MIPS
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB
-	# Horrible source of confusion.  Die, die, die ...
-	select EMBEDDED
-	select RTC_LIB if !LEMOTE_FULOONG2E
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select RTC_LIB if !MACH_LOONGSON
 
 mainmenu "Linux/MIPS Kernel Configuration"
 
@@ -22,6 +25,7 @@ choice
 
 config MACH_ALCHEMY
 	bool "Alchemy processor based machines"
+	select SYS_SUPPORTS_ZBOOT
 
 config AR7
 	bool "Texas Instruments AR7"
@@ -36,6 +40,7 @@ config AR7
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	select GENERIC_GPIO
 	select GCD
 	select VLYNQ
@@ -43,23 +48,6 @@ config AR7
 	  Support for the Texas Instruments AR7 System-on-a-Chip
 	  family: TNETD7100, 7200 and 7300.
 
-config BASLER_EXCITE
-	bool "Basler eXcite smart camera"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_COHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select IRQ_CPU_RM9K
-	select MIPS_RM9122
-	select SYS_HAS_CPU_RM9000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	help
-	  The eXcite is a smart camera platform manufactured by
-	  Basler Vision Technologies AG.
-
 config BCM47XX
 	bool "BCM47XX based boards"
 	select CEVT_R4K
@@ -192,6 +180,7 @@ config LASAT
 
 config MACH_LOONGSON
 	bool "Loongson family of machines"
+	select SYS_SUPPORTS_ZBOOT_UART16550
 	help
 	  This enables the support of Loongson family of machines.
 
@@ -233,6 +222,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_MIPS_CMP
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
+	select SYS_SUPPORTS_ZBOOT
 	help
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
@@ -334,6 +324,24 @@ config PMC_YOSEMITE
 	  Yosemite is an evaluation board for the RM9000x2 processor
 	  manufactured by PMC-Sierra.
 
+config POWERTV
+	bool "Cisco PowerTV"
+	select BOOT_ELF32
+	select CEVT_R4K
+	select CPU_MIPSR2_IRQ_VI
+	select CPU_MIPSR2_IRQ_EI
+	select CSRC_POWERTV
+	select DMA_NONCOHERENT
+	select HW_HAS_PCI
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select USB_OHCI_LITTLE_ENDIAN
+	help
+	  This enables support for the Cisco PowerTV Platform.
+
 config SGI_IP22
 	bool "SGI IP22 (Indy/Indigo2)"
 	select ARC
@@ -674,11 +682,11 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
-source "arch/mips/basler/excite/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
+source "arch/mips/powertv/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
@@ -778,6 +786,9 @@ config CSRC_BCM1480
 config CSRC_IOASIC
 	bool
 
+config CSRC_POWERTV
+	bool
+
 config CSRC_R4K_LIB
 	bool
 
@@ -806,20 +817,6 @@ config DMA_NONCOHERENT
 config DMA_NEED_PCI_MAP_STATE
 	bool
 
-config EARLY_PRINTK
-	bool "Early printk" if EMBEDDED && DEBUG_KERNEL
-	depends on SYS_HAS_EARLY_PRINTK
-	default y
-	help
-	  This option enables special console drivers which allow the kernel
-	  to print messages very early in the bootup process.
-
-	  This is useful for kernel debugging when your machine crashes very
-	  early before the console code is initialized. For normal operation,
-	  it is not recommended because it looks ugly on some machines and
-	  doesn't cooperate with an X server. You should normally say N here,
-	  unless you want to debug such a crash.
-
 config SYS_HAS_EARLY_PRINTK
 	bool
 
@@ -1069,6 +1066,21 @@ config CPU_LOONGSON2E
 	  The Loongson 2E processor implements the MIPS III instruction set
 	  with many extensions.
 
+	  It has an internal FPGA northbridge, which is compatiable to
+	  bonito64.
+
+config CPU_LOONGSON2F
+	bool "Loongson 2F"
+	depends on SYS_HAS_CPU_LOONGSON2F
+	select CPU_LOONGSON2
+	help
+	  The Loongson 2F processor implements the MIPS III instruction set
+	  with many extensions.
+
+	  Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
+	  have a similar programming interface with FPGA northbridge used in
+	  Loongson2E.
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1294,6 +1306,16 @@ config CPU_CAVIUM_OCTEON
 
 endchoice
 
+config SYS_SUPPORTS_ZBOOT
+	bool
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_BZIP2
+	select HAVE_KERNEL_LZMA
+
+config SYS_SUPPORTS_ZBOOT_UART16550
+	bool
+	select SYS_SUPPORTS_ZBOOT
+
 config CPU_LOONGSON2
 	bool
 	select CPU_SUPPORTS_32BIT_KERNEL
@@ -1303,6 +1325,12 @@ config CPU_LOONGSON2
 config SYS_HAS_CPU_LOONGSON2E
 	bool
 
+config SYS_HAS_CPU_LOONGSON2F
+	bool
+	select CPU_SUPPORTS_CPUFREQ
+	select CPU_SUPPORTS_ADDRWINCFG if 64BIT
+	select CPU_SUPPORTS_UNCACHED_ACCELERATED
+
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
@@ -1411,8 +1439,17 @@ config CPU_SUPPORTS_32BIT_KERNEL
 	bool
 config CPU_SUPPORTS_64BIT_KERNEL
 	bool
+config CPU_SUPPORTS_CPUFREQ
+	bool
+config CPU_SUPPORTS_ADDRWINCFG
+	bool
 config CPU_SUPPORTS_HUGEPAGES
 	bool
+config CPU_SUPPORTS_UNCACHED_ACCELERATED
+	bool
+config MIPS_PGD_C0_CONTEXT
+	bool
+	default y if 64BIT && CPU_MIPSR2
 
 #
 # Set to y for ptrace access to watch registers.
@@ -2024,15 +2061,6 @@ config STACKTRACE_SUPPORT
 
 source "init/Kconfig"
 
-config PROBE_INITRD_HEADER
-	bool "Probe initrd header created by addinitrd"
-	depends on BLK_DEV_INITRD
-	help
-	  Probe initrd header at the last page of kernel image.
-	  Say Y here if you are using arch/mips/boot/addinitrd.c to
-	  add initrd or initramfs image to the kernel image.
-	  Otherwise, say N.
-
 source "kernel/Kconfig.freezer"
 
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
@@ -2104,6 +2132,7 @@ config MMU
 
 config I8253
 	bool
+	select MIPS_EXTERNAL_TIMER
 
 config ZONE_DMA32
 	bool
@@ -2180,6 +2209,8 @@ source "kernel/power/Kconfig"
 
 endmenu
 
+source "arch/mips/kernel/cpufreq/Kconfig"
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"

arch/mips/Kconfig.debug

@@ -6,15 +6,66 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
+config EARLY_PRINTK
+	bool "Early printk" if EMBEDDED
+	depends on SYS_HAS_EARLY_PRINTK
+	default y
+	help
+	  This option enables special console drivers which allow the kernel
+	  to print messages very early in the bootup process.
+
+	  This is useful for kernel debugging when your machine crashes very
+	  early before the console code is initialized. For normal operation,
+	  it is not recommended because it looks ugly on some machines and
+	  doesn't cooperate with an X server. You should normally say N here,
+	  unless you want to debug such a crash.
+
+config CMDLINE_BOOL
+	bool "Built-in kernel command line"
+	default n
+	help
+	  For most systems, it is firmware or second stage bootloader that
+	  by default specifies the kernel command line options.  However,
+	  it might be necessary or advantageous to either override the
+	  default kernel command line or add a few extra options to it.
+	  For such cases, this option allows you to hardcode your own
+	  command line options directly into the kernel.  For that, you
+	  should choose 'Y' here, and fill in the extra boot arguments
+	  in CONFIG_CMDLINE.
+
+	  The built-in options will be concatenated to the default command
+	  line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
+	  command line will be ignored and replaced by the built-in string.
+
+	  Most MIPS systems will normally expect 'N' here and rely upon
+	  the command line from the firmware or the second-stage bootloader.
+
 config CMDLINE
 	string "Default kernel command string"
+	depends on CMDLINE_BOOL
 	default ""
 	help
 	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel. For these platforms, you can supply
-	  some command-line options at build time by entering them here.  In
-	  other cases you can specify kernel args so that you don't have
-	  to set them up in board prom initialization routines.
+	  pass arguments to the kernel.  For these platforms, and for the cases
+	  when you want to add some extra options to the command line or ignore
+	  the default command line, you can supply some command-line options at
+	  build time by entering them here.  In other cases you can specify
+	  kernel args so that you don't have to set them up in board prom
+	  initialization routines.
+
+	  For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE
+	  options.
+
+config CMDLINE_OVERRIDE
+	bool "Built-in command line overrides firware arguments"
+	default n
+	depends on CMDLINE_BOOL
+	help
+	  By setting this option to 'Y' you will have your kernel ignore
+	  command line arguments from firmware or second stage bootloader.
+	  Instead, the built-in command line will be used exclusively.
+
+	  Normally, you will choose 'N' here.
 
 config DEBUG_STACK_USAGE
 	bool "Enable stack utilization instrumentation"

arch/mips/Makefile

@@ -48,7 +48,16 @@ ifneq ($(SUBARCH),$(ARCH))
   endif
 endif
 
+ifndef CONFIG_FUNCTION_TRACER
 cflags-y := -ffunction-sections
+endif
+ifdef CONFIG_FUNCTION_GRAPH_TRACER
+  ifndef KBUILD_MCOUNT_RA_ADDRESS
+    ifeq ($(call cc-option-yn,-mmcount-ra-address), y)
+      cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS
+    endif
+  endif
+endif
 cflags-y += $(call cc-option, -mno-check-zero-division)
 
 ifdef CONFIG_32BIT
@@ -69,6 +78,7 @@ endif
 
 all-$(CONFIG_BOOT_ELF32)	:= $(vmlinux-32)
 all-$(CONFIG_BOOT_ELF64)	:= $(vmlinux-64)
+all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz
 
 #
 # GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel
@@ -124,6 +134,8 @@ cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_LOONGSON2)	+= -Wa,--trap
 cflags-$(CONFIG_CPU_LOONGSON2E) += \
 	$(call cc-option,-march=loongson2e,-march=r4600)
+cflags-$(CONFIG_CPU_LOONGSON2F) += \
+	$(call cc-option,-march=loongson2f,-march=r4600)
 
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
@@ -324,6 +336,7 @@ core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
 cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
                     -mno-branch-likely
 load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
+load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000
 
 #
 # MIPS Malta board
@@ -331,7 +344,7 @@ load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
 core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mti-malta/
 cflags-$(CONFIG_MIPS_MALTA)	+= -I$(srctree)/arch/mips/include/asm/mach-malta
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_MALTA)	:= vmlinux.bin
+all-$(CONFIG_MIPS_MALTA)	:= vmlinuz.bin
 
 #
 # MIPS SIM
@@ -355,13 +368,6 @@ core-$(CONFIG_PMC_YOSEMITE)	+= arch/mips/pmc-sierra/yosemite/
 cflags-$(CONFIG_PMC_YOSEMITE)	+= -I$(srctree)/arch/mips/include/asm/mach-yosemite
 load-$(CONFIG_PMC_YOSEMITE)	+= 0xffffffff80100000
 
-#
-# Basler eXcite
-#
-core-$(CONFIG_BASLER_EXCITE)	+= arch/mips/basler/excite/
-cflags-$(CONFIG_BASLER_EXCITE)	+= -I$(srctree)/arch/mips/include/asm/mach-excite
-load-$(CONFIG_BASLER_EXCITE)	+= 0x80100000
-
 #
 # LASAT platforms
 #
@@ -440,6 +446,13 @@ cflags-$(CONFIG_SOC_EMMA2RH)	+= -I$(srctree)/arch/mips/include/asm/mach-emma2rh
 core-$(CONFIG_NEC_MARKEINS)	+= arch/mips/emma/markeins/
 load-$(CONFIG_NEC_MARKEINS)	+= 0xffffffff88100000
 
+#
+# Cisco PowerTV Platform
+#
+core-$(CONFIG_POWERTV)		+= arch/mips/powertv/
+cflags-$(CONFIG_POWERTV)        += -I$(srctree)/arch/mips/include/asm/mach-powertv
+load-$(CONFIG_POWERTV)		+= 0xffffffff90800000
+
 #
 # SGI IP22 (Indy/Indigo2)
 #
@@ -581,7 +594,7 @@ load-$(CONFIG_SNI_RM)		+= 0xffffffff80600000
 else
 load-$(CONFIG_SNI_RM)		+= 0xffffffff80030000
 endif
-all-$(CONFIG_SNI_RM)		:= vmlinux.ecoff
+all-$(CONFIG_SNI_RM)		:= vmlinuz.ecoff
 
 #
 # Common TXx9
@@ -699,9 +712,23 @@ vmlinux.64: vmlinux
 	$(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
 
 makeboot =$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) $(1)
+makezboot =$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
+	   VMLINUX_LOAD_ADDRESS=$(load-y) 32bit-bfd=$(32bit-bfd) $(1)
 
 all:	$(all-y)
 
+vmlinuz: vmlinux FORCE
+	+@$(call makezboot,$@)
+
+vmlinuz.bin: vmlinux
+	+@$(call makezboot,$@)
+
+vmlinuz.ecoff: vmlinux
+	+@$(call makezboot,$@)
+
+vmlinuz.srec: vmlinux
+	+@$(call makezboot,$@)
+
 vmlinux.bin: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
@@ -726,11 +753,13 @@ endif
 
 install:
 	$(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
+	$(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
 	$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
 	$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
 
 archclean:
 	@$(MAKE) $(clean)=arch/mips/boot
+	@$(MAKE) $(clean)=arch/mips/boot/compressed
 	@$(MAKE) $(clean)=arch/mips/lasat
 
 define archhelp
@@ -738,10 +767,18 @@ define archhelp
 	echo '  vmlinux.ecoff        - ECOFF boot image'
 	echo '  vmlinux.bin          - Raw binary boot image'
 	echo '  vmlinux.srec         - SREC boot image'
+	echo '  vmlinuz              - Compressed boot(zboot) image'
+	echo '  vmlinuz.ecoff        - ECOFF zboot image'
+	echo '  vmlinuz.bin          - Raw binary zboot image'
+	echo '  vmlinuz.srec         - SREC zboot image'
 	echo
 	echo '  These will be default as apropriate for a configured platform.'
 endef
 
 CLEAN_FILES += vmlinux.32 \
 	       vmlinux.64 \
-	       vmlinux.ecoff
+	       vmlinux.ecoff \
+	       vmlinuz \
+	       vmlinuz.ecoff \
+	       vmlinuz.bin \
+	       vmlinuz.srec

arch/mips/ar7/platform.c

@@ -505,7 +505,7 @@ static int __init ar7_register_devices(void)
 	int res;
 	u32 *bootcr, val;
 #ifdef CONFIG_SERIAL_8250
-	static struct uart_port uart_port[2];
+	static struct uart_port uart_port[2] __initdata;
 
 	memset(uart_port, 0, sizeof(struct uart_port) * 2);
 

arch/mips/basler/excite/Kconfig

@@ -1,9 +0,0 @@
-config BASLER_EXCITE_PROTOTYPE
-	bool "Support for pre-release units"
-	depends on BASLER_EXCITE
-	default n
-	help
-	  Pre-series (prototype) units are different from later ones in
-	  some ways. Select this option if you have one of these. Please
-	  note that a kernel built with this option selected will not be
-	  able to run on normal units.

arch/mips/basler/excite/Makefile

@@ -1,8 +0,0 @@
-#
-# Makefile for Basler eXcite
-#
-
-obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
-				   excite_device.o excite_procfs.o
-
-obj-m				+= excite_iodev.o

arch/mips/basler/excite/excite_device.c

@@ -1,403 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <linux/err.h>
-#include <linux/jiffies.h>
-#include <linux/sched.h>
-#include <asm/types.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-#include <rm9k_eth.h>
-#include <rm9k_wdt.h>
-#include <rm9k_xicap.h>
-#include <excite_nandflash.h>
-
-#include "excite_iodev.h"
-
-#define RM9K_GE_UNIT	0
-#define XICAP_UNIT	0
-#define NAND_UNIT	0
-
-#define DLL_TIMEOUT	3		/* seconds */
-
-
-#define RINIT(__start__, __end__, __name__, __parent__) {	\
-	.name	= __name__ "_0",				\
-	.start	= (__start__),					\
-	.end	= (__end__),					\
-	.flags	= 0,						\
-	.parent	= (__parent__)					\
-}
-
-#define RINIT_IRQ(__irq__, __name__) {	\
-	.name	= __name__ "_0",	\
-	.start	= (__irq__),		\
-	.end	= (__irq__),		\
-	.flags	= IORESOURCE_IRQ,	\
-	.parent	= NULL			\
-}
-
-
-
-enum {
-	slice_xicap,
-	slice_eth
-};
-
-
-
-static struct resource
-	excite_ctr_resource __maybe_unused = {
-		.name		= "GPI counters",
-		.start		= 0,
-		.end		= 5,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_gpislice_resource __maybe_unused = {
-		.name		= "GPI slices",
-		.start		= 0,
-		.end		= 1,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_mdio_channel_resource __maybe_unused = {
-		.name		= "MDIO channels",
-		.start		= 0,
-		.end		= 1,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_fifomem_resource __maybe_unused = {
-		.name		= "FIFO memory",
-		.start		= 0,
-		.end		= 767,
-		.flags		= 0,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_scram_resource __maybe_unused = {
-		.name		= "Scratch RAM",
-		.start		= EXCITE_PHYS_SCRAM,
-		.end		= EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_fpga_resource __maybe_unused = {
-		.name		= "System FPGA",
-		.start		= EXCITE_PHYS_FPGA,
-		.end		= EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_nand_resource __maybe_unused = {
-		.name		= "NAND flash control",
-		.start		= EXCITE_PHYS_NAND,
-		.end		= EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	},
-	excite_titan_resource __maybe_unused = {
-		.name		= "TITAN registers",
-		.start		= EXCITE_PHYS_TITAN,
-		.end		= EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
-		.flags		= IORESOURCE_MEM,
-		.parent		= NULL,
-		.sibling	= NULL,
-		.child		= NULL
-	};
-
-
-
-static void adjust_resources(struct resource *res, unsigned int n)
-{
-	struct resource *p;
-	const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM
-				   | IORESOURCE_IRQ | IORESOURCE_DMA;
-
-	for (p = res; p < res + n; p++) {
-		const struct resource * const parent = p->parent;
-		if (parent) {
-			p->start += parent->start;
-			p->end   += parent->start;
-			p->flags =  parent->flags & mask;
-		}
-	}
-}
-
-
-
-#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
-static struct resource xicap_rsrc[] = {
-	RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource),
-	RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource),
-	RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource),
-	RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource),
-	RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource),
-	RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource),
-	RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
-	RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource),
-	RINIT_IRQ(TITAN_IRQ,  XICAP_RESOURCE_IRQ)
-};
-
-static struct platform_device xicap_pdev = {
-	.name		= XICAP_NAME,
-	.id		= XICAP_UNIT,
-	.num_resources	= ARRAY_SIZE(xicap_rsrc),
-	.resource	= xicap_rsrc
-};
-
-/*
- * Create a platform device for the GPI port that receives the
- * image data from the embedded camera.
- */
-static int __init xicap_devinit(void)
-{
-	unsigned long tend;
-	u32 reg;
-	int retval;
-
-	adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc));
-
-	/* Power up the slice and configure it. */
-	reg = titan_readl(CPTC1R);
-	reg &= ~(0x11100 << slice_xicap);
-	titan_writel(reg, CPTC1R);
-
-	/* Enable slice & DLL. */
-	reg= titan_readl(CPRR);
-	reg &= ~(0x00030003 << (slice_xicap * 2));
-	titan_writel(reg, CPRR);
-
-	/* Wait for DLLs to lock */
-	tend = jiffies + DLL_TIMEOUT * HZ;
-	while (time_before(jiffies, tend)) {
-		if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))))
-			break;
-		yield();
-	}
-
-	if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) {
-		printk(KERN_ERR "%s: DLL not locked after %u seconds\n",
-		       xicap_pdev.name, DLL_TIMEOUT);
-		retval = -ETIME;
-	} else {
-		/* Register platform device */
-		retval = platform_device_register(&xicap_pdev);
-	}
-
-	return retval;
-}
-
-device_initcall(xicap_devinit);
-#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
-
-
-
-#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE)
-static struct resource wdt_rsrc[] = {
-	RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource),
-	RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource),
-	RINIT_IRQ(TITAN_IRQ,  WDT_RESOURCE_IRQ)
-};
-
-static struct platform_device wdt_pdev = {
-	.name		= WDT_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(wdt_rsrc),
-	.resource	= wdt_rsrc
-};
-
-/*
- * Create a platform device for the GPI port that receives the
- * image data from the embedded camera.
- */
-static int __init wdt_devinit(void)
-{
-	adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc));
-	return platform_device_register(&wdt_pdev);
-}
-
-device_initcall(wdt_devinit);
-#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */
-
-
-
-static struct resource excite_nandflash_rsrc[] = {
- 	RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS,  &excite_nand_resource)
-};
-
-static struct platform_device excite_nandflash_pdev = {
-	.name		= "excite_nand",
-	.id		= NAND_UNIT,
-	.num_resources	= ARRAY_SIZE(excite_nandflash_rsrc),
-	.resource	= excite_nandflash_rsrc
-};
-
-/*
- * Create a platform device for the access to the nand-flash
- * port
- */
-static int __init excite_nandflash_devinit(void)
-{
-	adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc));
-
-        /* nothing to be done here */
-
-        /* Register platform device */
-	return platform_device_register(&excite_nandflash_pdev);
-}
-
-device_initcall(excite_nandflash_devinit);
-
-
-
-static struct resource iodev_rsrc[] = {
-	RINIT_IRQ(FPGA1_IRQ,  IODEV_RESOURCE_IRQ)
-};
-
-static struct platform_device io_pdev = {
-	.name		= IODEV_NAME,
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(iodev_rsrc),
-	.resource	= iodev_rsrc
-};
-
-/*
- * Create a platform device for the external I/O ports.
- */
-static int __init io_devinit(void)
-{
-	adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc));
-	return platform_device_register(&io_pdev);
-}
-
-device_initcall(io_devinit);
-
-
-
-
-#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
-static struct resource rm9k_ge_rsrc[] = {
-	RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource),
-	RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource),
-	RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource),
-	RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource),
-	RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource),
-	RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource),
-	RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource),
-	RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource),
-	RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource),
-	RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource),
-	RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource),
-	RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
-	RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource),
-	RINIT_IRQ(TITAN_IRQ,  RM9K_GE_RESOURCE_IRQ_MAIN),
-	RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY)
-};
-
-static struct platform_device rm9k_ge_pdev = {
-	.name		= RM9K_GE_NAME,
-	.id		= RM9K_GE_UNIT,
-	.num_resources	= ARRAY_SIZE(rm9k_ge_rsrc),
-	.resource	= rm9k_ge_rsrc
-};
-
-
-
-/*
- * Create a platform device for the Ethernet port.
- */
-static int __init rm9k_ge_devinit(void)
-{
-	u32 reg;
-
-	adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc));
-
-	/* Power up the slice and configure it. */
-	reg = titan_readl(CPTC1R);
-	reg &= ~(0x11000 << slice_eth);
-	reg |= 0x100 << slice_eth;
-	titan_writel(reg, CPTC1R);
-
-	/* Take the MAC out of reset, reset the DLLs. */
-	reg = titan_readl(CPRR);
-	reg &= ~(0x00030000 << (slice_eth * 2));
-	reg |= 0x3 << (slice_eth * 2);
-	titan_writel(reg, CPRR);
-
-	return platform_device_register(&rm9k_ge_pdev);
-}
-
-device_initcall(rm9k_ge_devinit);
-#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
-
-
-
-static int __init excite_setup_devs(void)
-{
-	int res;
-	u32 reg;
-
-	/* Enable xdma and fifo interrupts */
-	reg = titan_readl(0x0050);
-	titan_writel(reg | 0x18000000, 0x0050);
-
-	res = request_resource(&iomem_resource, &excite_titan_resource);
-	if (res)
-		return res;
-	res = request_resource(&iomem_resource, &excite_scram_resource);
-	if (res)
-		return res;
-	res = request_resource(&iomem_resource, &excite_fpga_resource);
-	if (res)
-		return res;
-	res = request_resource(&iomem_resource, &excite_nand_resource);
-	if (res)
-		return res;
-	excite_fpga_resource.flags = excite_fpga_resource.parent->flags &
-				   ( IORESOURCE_IO | IORESOURCE_MEM
-				   | IORESOURCE_IRQ | IORESOURCE_DMA);
-	excite_nand_resource.flags = excite_nand_resource.parent->flags &
-				   ( IORESOURCE_IO | IORESOURCE_MEM
-				   | IORESOURCE_IRQ | IORESOURCE_DMA);
-
-	return 0;
-}
-
-arch_initcall(excite_setup_devs);
-

arch/mips/basler/excite/excite_iodev.c

@@ -1,178 +0,0 @@
-/*
- *  Copyright (C) 2005 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/poll.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
-
-#include "excite_iodev.h"
-
-
-
-static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
-static int __init iodev_probe(struct platform_device *);
-static int __exit iodev_remove(struct platform_device *);
-static int iodev_open(struct inode *, struct file *);
-static int iodev_release(struct inode *, struct file *);
-static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
-static unsigned int iodev_poll(struct file *, struct poll_table_struct *);
-static irqreturn_t iodev_irqhdl(int, void *);
-
-
-
-static const char iodev_name[] = "iodev";
-static unsigned int iodev_irq;
-static DECLARE_WAIT_QUEUE_HEAD(wq);
-
-
-
-static const struct file_operations fops =
-{
-	.owner		= THIS_MODULE,
-	.open		= iodev_open,
-	.release	= iodev_release,
-	.read		= iodev_read,
-	.poll		= iodev_poll
-};
-
-static struct miscdevice miscdev =
-{
-	.minor		= MISC_DYNAMIC_MINOR,
-	.name		= iodev_name,
-	.fops		= &fops
-};
-
-static struct platform_driver iodev_driver = {
-	.driver = {
-		.name		= iodev_name,
-		.owner		= THIS_MODULE,
-	},
-	.probe		= iodev_probe,
-	.remove		= __devexit_p(iodev_remove),
-};
-
-
-
-static const struct resource *
-iodev_get_resource(struct platform_device *pdv, const char *name,
-		     unsigned int type)
-{
-	char buf[80];
-	if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
-		return NULL;
-	return platform_get_resource_byname(pdv, type, buf);
-}
-
-
-
-/* No hotplugging on the platform bus - use __init */
-static int __init iodev_probe(struct platform_device *dev)
-{
-	const struct resource * const ri =
-		iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
-
-	if (unlikely(!ri))
-		return -ENXIO;
-
-	iodev_irq = ri->start;
-	return misc_register(&miscdev);
-}
-
-
-
-static int __exit iodev_remove(struct platform_device *dev)
-{
-	return misc_deregister(&miscdev);
-}
-
-static int iodev_open(struct inode *i, struct file *f)
-{
-	int ret;
-
-	ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
-			   iodev_name, &miscdev);
-
-	return ret;
-}
-
-static int iodev_release(struct inode *i, struct file *f)
-{
-	free_irq(iodev_irq, &miscdev);
-	return 0;
-}
-
-
-
-
-static ssize_t
-iodev_read(struct file *f, char __user *d, size_t s, loff_t *o)
-{
-	ssize_t ret;
-	DEFINE_WAIT(w);
-
-	prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE);
-	if (!signal_pending(current))
-		schedule();
-	ret = signal_pending(current) ? -ERESTARTSYS : 0;
-	finish_wait(&wq, &w);
-	return ret;
-}
-
-
-static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p)
-{
-	poll_wait(f, &wq, p);
-	return POLLOUT | POLLWRNORM;
-}
-
-static irqreturn_t iodev_irqhdl(int irq, void *ctxt)
-{
-	wake_up(&wq);
-
-	return IRQ_HANDLED;
-}
-
-static int __init iodev_init_module(void)
-{
-	return platform_driver_register(&iodev_driver);
-}
-
-
-
-static void __exit iodev_cleanup_module(void)
-{
-	platform_driver_unregister(&iodev_driver);
-}
-
-module_init(iodev_init_module);
-module_exit(iodev_cleanup_module);
-
-
-
-MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
-MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler");
-MODULE_VERSION("0.0");
-MODULE_LICENSE("GPL");

arch/mips/basler/excite/excite_iodev.h

@@ -1,10 +0,0 @@
-#ifndef __EXCITE_IODEV_H__
-#define __EXCITE_IODEV_H__
-
-/* Device name */
-#define IODEV_NAME		"iodev"
-
-/* Resource names */
-#define IODEV_RESOURCE_IRQ	"excite_iodev_irq"
-
-#endif /* __EXCITE_IODEV_H__ */

arch/mips/basler/excite/excite_irq.c

@@ -1,122 +0,0 @@
-/*
- *  Copyright (C) by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslereb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-extern asmlinkage void excite_handle_int(void);
-
-/*
- * Initialize the interrupt handler
- */
-void __init arch_init_irq(void)
-{
-	mips_cpu_irq_init();
-	rm7k_cpu_irq_init();
-	rm9k_cpu_irq_init();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	const u32
-		interrupts = read_c0_cause() >> 8,
-		mask = ((read_c0_status() >> 8) & 0x000000ff) |
-		       (read_c0_intcontrol() & 0x0000ff00),
-		pending = interrupts & mask;
-	u32 msgintflags, msgintmask, msgint;
-
-	/* process timer interrupt */
-	if (pending & (1 << TIMER_IRQ)) {
-		do_IRQ(TIMER_IRQ);
-		return;
-	}
-
-	/* Process PCI interrupts */
-#if USB_IRQ < 10
-	msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20));
-	if ((pending & (1 << USB_IRQ)) && msgint) {
-#else
-	if (pending & (1 << USB_IRQ)) {
-#endif
-		do_IRQ(USB_IRQ);
-		return;
-	}
-
-	/* Process TITAN interrupts */
-	msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
-	if ((pending & (1 << TITAN_IRQ)) && msgint) {
-		ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-		do_IRQ(TITAN_IRQ);
-		return;
-	}
-
-	/* Process FPGA line #0 interrupts */
-	msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20));
-	if ((pending & (1 << FPGA0_IRQ)) && msgint) {
-		do_IRQ(FPGA0_IRQ);
-		return;
-	}
-
-	/* Process FPGA line #1 interrupts */
-	msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20));
-	if ((pending & (1 << FPGA1_IRQ)) && msgint) {
-		do_IRQ(FPGA1_IRQ);
-		return;
-	}
-
-	/* Process PHY interrupts */
-	msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10));
-	msgintmask  = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10));
-	msgint	    = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20));
-	if ((pending & (1 << PHY_IRQ)) && msgint) {
-		do_IRQ(PHY_IRQ);
-		return;
-	}
-
-	/* Process spurious interrupts */
-	spurious_interrupt();
-}

arch/mips/basler/excite/excite_procfs.c

@@ -1,92 +0,0 @@
-/*
- *  Copyright (C) 2004, 2005 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  Procfs support for Basler eXcite
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/stat.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-static int excite_unit_id_proc_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "%06x", unit_id);
-	return 0;
-}
-
-static int excite_unit_id_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, excite_unit_id_proc_show, NULL);
-}
-
-static const struct file_operations excite_unit_id_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= excite_unit_id_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int
-excite_bootrom_read(char *page, char **start, off_t off, int count,
-		  int *eof, void *data)
-{
-	void __iomem * src;
-
-	if (off >= EXCITE_SIZE_BOOTROM) {
-		*eof = 1;
-		return 0;
-	}
-
-	if ((off + count) > EXCITE_SIZE_BOOTROM)
-		count = EXCITE_SIZE_BOOTROM - off;
-
-	src = ioremap(EXCITE_PHYS_BOOTROM + off, count);
-	if (src) {
-		memcpy_fromio(page, src, count);
-		iounmap(src);
-		*start = page;
-	} else {
-		count = -ENOMEM;
-	}
-
-	return count;
-}
-
-void excite_procfs_init(void)
-{
-	/* Create & populate /proc/excite */
-	struct proc_dir_entry * const pdir = proc_mkdir("excite", NULL);
-	if (pdir) {
-		struct proc_dir_entry * e;
-
-		e = proc_create("unit_id", S_IRUGO, pdir,
-				&excite_unit_id_proc_fops);
-		if (e) e->size = 6;
-
-		e = create_proc_read_entry("bootrom", S_IRUGO, pdir,
-					   excite_bootrom_read, NULL);
-		if (e) e->size = EXCITE_SIZE_BOOTROM;
-	}
-}

arch/mips/basler/excite/excite_prom.c

@@ -1,144 +0,0 @@
-/*
- *  Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com)
- *  Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
- *  Manish Lachwani.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/bootinfo.h>
-#include <asm/string.h>
-
-#include <excite.h>
-
-/* This struct is used by Redboot to pass arguments to the kernel */
-typedef struct
-{
-	char *name;
-	char *val;
-} t_env_var;
-
-struct parmblock {
-	t_env_var memsize;
-	t_env_var modetty0;
-	t_env_var ethaddr;
-	t_env_var env_end;
-	char *argv[2];
-	char text[0];
-};
-
-static unsigned int prom_argc;
-static const char ** prom_argv;
-static const t_env_var * prom_env;
-
-static void prom_halt(void) __attribute__((noreturn));
-static void prom_exit(void) __attribute__((noreturn));
-
-
-
-const char *get_system_type(void)
-{
-	return "Basler eXcite";
-}
-
-/*
- * Halt the system
- */
-static void prom_halt(void)
-{
-	printk(KERN_NOTICE "\n** System halted.\n");
-	while (1)
-		asm volatile (
-			"\t.set\tmips3\n"
-			"\twait\n"
-			"\t.set\tmips0\n"
-		);
-}
-
-/*
- * Reset the CPU and re-enter Redboot
- */
-static void prom_exit(void)
-{
-	unsigned int i;
-	volatile unsigned char * const flg =
-		(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR);
-
-	/* Clear the watchdog reset flag, set the reboot flag */
-	*flg &= ~0x01;
-	*flg |= 0x80;
-
-	for (i = 0; i < 10; i++) {
-		*(volatile unsigned char *)  (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02;
-		iob();
-		mdelay(1000);
-	}
-
-	printk(KERN_NOTICE "Reset failed\n");
-	prom_halt();
-}
-
-static const char __init *prom_getenv(char *name)
-{
-	const t_env_var * p;
-	for (p = prom_env; p->name != NULL; p++)
-		if(strcmp(name, p->name) == 0)
-			break;
-	return p->val;
-}
-
-/*
- * Init routine which accepts the variables from Redboot
- */
-void __init prom_init(void)
-{
-	const struct parmblock * const pb = (struct parmblock *) fw_arg2;
-
-	prom_argc = fw_arg0;
-	prom_argv = (const char **) fw_arg1;
-	prom_env = &pb->memsize;
-
-	/* Callbacks for halt, restart */
-	_machine_restart = (void (*)(char *)) prom_exit;
-	_machine_halt = prom_halt;
-
-#ifdef CONFIG_32BIT
-	/* copy command line */
-	strcpy(arcs_cmdline, prom_argv[1]);
-	memsize = simple_strtol(prom_getenv("memsize"), NULL, 16);
-	strcpy(modetty, prom_getenv("modetty0"));
-#endif /* CONFIG_32BIT */
-
-#ifdef CONFIG_64BIT
-#	error 64 bit support not implemented
-#endif /* CONFIG_64BIT */
-}
-
-/* This is called from free_initmem(), so we need to provide it */
-void __init prom_free_prom_memory(void)
-{
-	/* Nothing to do */
-}

arch/mips/basler/excite/excite_setup.c

@@ -1,302 +0,0 @@
-/*
- *  Copyright (C) 2004, 2005 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *  Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
- *  Manish Lachwani.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <asm/bootinfo.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable-32.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-#define TITAN_UART_CLK	25000000
-
-#if 1
-/* normal serial port assignment */
-#define REGBASE_SER0	0x0208
-#define REGBASE_SER1	0x0238
-#define MASK_SER0	0x1
-#define MASK_SER1	0x2
-#else
-/* serial ports swapped */
-#define REGBASE_SER0	0x0238
-#define REGBASE_SER1	0x0208
-#define MASK_SER0	0x2
-#define MASK_SER1	0x1
-#endif
-
-unsigned long memsize;
-char modetty[30];
-unsigned int titan_irq = TITAN_IRQ;
-static void __iomem * ctl_regs;
-u32 unit_id;
-
-volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
-volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
-
-/* Protect access to shared GPI registers */
-DEFINE_SPINLOCK(titan_lock);
-int titan_irqflags;
-
-
-/*
- * The eXcite platform uses the alternate timer interrupt
- *
- * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how
- * to handle the alternate timer interrupt of the RM9000.
- */
-void __init plat_time_init(void)
-{
-	const u32 modebit5 = ocd_readl(0x00e4);
-	unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2;
-	unsigned int div = ((modebit5 >> 16) & 0x1f) + 2;
-
-	if (div == 33)
-		div = 1;
-	mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
-}
-
-static int __init excite_init_console(void)
-{
-#if defined(CONFIG_SERIAL_8250)
-	static __initdata char serr[] =
-		KERN_ERR "Serial port #%u setup failed\n";
-	struct uart_port up;
-
-	/* Take the DUART out of reset */
-	titan_writel(0x00ff1cff, CPRR);
-
-#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
-	/* Enable both ports */
-	titan_writel(MASK_SER0 | MASK_SER1, UACFG);
-#else
-	/* Enable port #0 only */
-	titan_writel(MASK_SER0, UACFG);
-#endif
-
- 	/*
-	 * Set up serial port #0. Do not use autodetection; the result is
-	 * not what we want.
- 	 */
-	memset(&up, 0, sizeof(up));
-	up.membase	= (char *) titan_addr(REGBASE_SER0);
-	up.irq		= TITAN_IRQ;
-	up.uartclk	= TITAN_UART_CLK;
-	up.regshift	= 0;
-	up.iotype	= UPIO_RM9000;
-	up.type		= PORT_RM9000;
-	up.flags	= UPF_SHARE_IRQ;
-	up.line		= 0;
-	if (early_serial_setup(&up))
-		printk(serr, up.line);
-
-#if CONFIG_SERIAL_8250_NR_UARTS > 1
-	/* And now for port #1. */
-	up.membase	= (char *) titan_addr(REGBASE_SER1);
-	up.line		= 1;
- 	if (early_serial_setup(&up))
-		printk(serr, up.line);
-#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */
-#else
-	/* Leave the DUART in reset */
-	titan_writel(0x00ff3cff, CPRR);
-#endif  /* defined(CONFIG_SERIAL_8250) */
-
-	return 0;
-}
-
-static int __init excite_platform_init(void)
-{
-	unsigned int i;
-	unsigned char buf[3];
-	u8 reg;
-	void __iomem * dpr;
-
-	/* BIU buffer allocations */
-	ocd_writel(8, CPURSLMT);	/* CPU */
-	titan_writel(4, CPGRWL);	/* GPI / Ethernet */
-
-	/* Map control registers located in FPGA */
-	ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16);
-	if (!ctl_regs)
-		panic("eXcite: failed to map platform control registers\n");
-	memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf));
-	unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16);
-
-	/* Clear the reboot flag */
-	dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1);
-	reg = __raw_readb(dpr);
-	__raw_writeb(reg & 0x7f, dpr);
-	iounmap(dpr);
-
-	/* Interrupt controller setup */
-	for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) {
-		ocd_writel(0x00000000, i + 0x04);
-		ocd_writel(0xffffffff, i + 0x0c);
-	}
-	ocd_writel(0x2, NMICONFIG);
-
-	ocd_writel(0x1 << (TITAN_MSGINT % 0x20),
-		   INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20)));
-	ocd_writel((0x1 << (FPGA0_MSGINT % 0x20))
-		   | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))),
-		   INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20)));
-	ocd_writel((0x1 << (FPGA1_MSGINT % 0x20))
-		   | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))),
-		   INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20)));
-	ocd_writel((0x1 << (PHY_MSGINT % 0x20))
-		   | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))),
-		   INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20)));
-#if USB_IRQ < 10
-	ocd_writel((0x1 << (USB_MSGINT % 0x20))
-		   | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))),
-		   INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20)));
-#endif
-	/* Enable the packet FIFO, XDMA and XDMA arbiter */
-	titan_writel(0x00ff18ff, CPRR);
-
-	/*
-	 * Set up the PADMUX. Power down all ethernet slices,
-	 * they will be powered up and configured at device startup.
-	 */
-	titan_writel(0x00878206, CPTC1R);
-	titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */
-
-	/* Reset and enable the FIFO block */
-	titan_writel(0x00000001, SDRXFCIE);
-	titan_writel(0x00000001, SDTXFCIE);
-	titan_writel(0x00000100, SDRXFCIE);
-	titan_writel(0x00000000, SDTXFCIE);
-
-	/*
-	 * Initialize the common interrupt shared by all components of
-	 * the GPI/Ethernet subsystem.
-	 */
-	titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0);
-	titan_writel(TITAN_MSGINT, CPCFG1);
-
-	/*
-	 * XDMA configuration.
-	 * In order for the XDMA to be sharable among multiple drivers,
-	 * the setup must be done here in the platform. The reason is that
-	 * this setup can only be done while the XDMA is in reset. If this
-	 * were done in a driver, it would interrupt all other drivers
-	 * using the XDMA.
-	 */
-	titan_writel(0x80021dff, GXCFG);	/* XDMA reset */
-	titan_writel(0x00000000, CPXCISRA);
-	titan_writel(0x00000000, CPXCISRB);	/* clear pending interrupts */
-#if defined(CONFIG_HIGHMEM)
-#	error change for HIGHMEM support!
-#else
-	titan_writel(0x00000000, GXDMADRPFX);	/* buffer address prefix */
-#endif
-	titan_writel(0, GXDMA_DESCADR);
-
-	for (i = 0x5040; i <= 0x5300; i += 0x0040)
-		titan_writel(0x80080000, i);	/* reset channel */
-
-	titan_writel((0x1 << 29)			/* no sparse tx descr. */
-		     | (0x1 << 28)			/* no sparse rx descr. */
-		     | (0x1 << 23) | (0x1 << 24)	/* descriptor coherency */
-		     | (0x1 << 21) | (0x1 << 22)	/* data coherency */
-		     | (0x1 << 17)
-		     | 0x1dff,
-		     GXCFG);
-
-#if defined(CONFIG_SMP)
-#	error No SMP support
-#else
-	/* All interrupts go to core #0 only. */
-	titan_writel(0x1f007fff, CPDST0A);
-	titan_writel(0x00000000, CPDST0B);
-	titan_writel(0x0000ff3f, CPDST1A);
-	titan_writel(0x00000000, CPDST1B);
-	titan_writel(0x00ffffff, CPXDSTA);
-	titan_writel(0x00000000, CPXDSTB);
-#endif
-
-	/* Enable DUART interrupts, disable everything else. */
-	titan_writel(0x04000000, CPGIG0ER);
-	titan_writel(0x000000c0, CPGIG1ER);
-
-	excite_procfs_init();
-	return 0;
-}
-
-void __init plat_mem_setup(void)
-{
-	volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000;
-
-	/* Announce RAM to system */
-	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
-
-	/* Set up the peripheral address map */
-	*(boot_ocd_base + (LKB9 / sizeof(u32))) = 0;
-	*(boot_ocd_base + (LKB10 / sizeof(u32))) = 0;
-	*(boot_ocd_base + (LKB11 / sizeof(u32))) = 0;
-	*(boot_ocd_base + (LKB12 / sizeof(u32))) = 0;
-	wmb();
-	*(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4;
-	wmb();
-
-	ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5);
-	ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5);
-	ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13);
-	ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13);
-
-	/* Local bus slot #0 */
-	ocd_writel(0x00040510, LDP0);
-	ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9);
-	ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9);
-
-	/* Local bus slot #2 */
-	ocd_writel(0x00000330, LDP2);
-	ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11);
-	ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11);
-
-	/* Local bus slot #3 */
-	ocd_writel(0x00123413, LDP3);
-	ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12);
-	ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12);
-}
-
-
-
-console_initcall(excite_init_console);
-arch_initcall(excite_platform_init);
-
-EXPORT_SYMBOL(titan_lock);
-EXPORT_SYMBOL(titan_irqflags);
-EXPORT_SYMBOL(titan_irq);
-EXPORT_SYMBOL(ocd_base);
-EXPORT_SYMBOL(titan_base);

arch/mips/bcm47xx/prom.c

@@ -100,11 +100,11 @@ static __init void prom_init_console(void)
 
 static __init void prom_init_cmdline(void)
 {
-	static char buf[CL_SIZE] __initdata;
+	static char buf[COMMAND_LINE_SIZE] __initdata;
 
 	/* Get the kernel command line from CFE */
-	if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) {
-		buf[CL_SIZE-1] = 0;
+	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
+		buf[COMMAND_LINE_SIZE - 1] = 0;
 		strcpy(arcs_cmdline, buf);
 	}
 
@@ -112,13 +112,13 @@ static __init void prom_init_cmdline(void)
 	 * as CFE is not available anymore later in the boot process. */
 	if ((strstr(arcs_cmdline, "console=")) == NULL) {
 		/* Try to read the default serial port used by CFE */
-		if ((cfe_getenv("BOOT_CONSOLE", buf, CL_SIZE) < 0)
+		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
 		    || (strncmp("uart", buf, 4)))
 			/* Default to uart0 */
 			strcpy(buf, "uart0");
 
 		/* Compute the new command line */
-		snprintf(arcs_cmdline, CL_SIZE, "%s console=ttyS%c,115200",
+		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
 			 arcs_cmdline, buf[4]);
 	}
 }

arch/mips/boot/Makefile

@@ -25,7 +25,7 @@ strip-flags	= $(addprefix --remove-section=,$(drop-sections))
 
 VMLINUX = vmlinux
 
-all: vmlinux.ecoff vmlinux.srec addinitrd
+all: vmlinux.ecoff vmlinux.srec
 
 vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
 	$(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
@@ -39,11 +39,7 @@ vmlinux.bin: $(VMLINUX)
 vmlinux.srec: $(VMLINUX)
 	$(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
 
-$(obj)/addinitrd: $(obj)/addinitrd.c
-	$(HOSTCC) -o $@ $^
-
-clean-files += addinitrd \
-	       elf2ecoff \
+clean-files += elf2ecoff \
 	       vmlinux.bin \
 	       vmlinux.ecoff \
 	       vmlinux.srec

arch/mips/boot/addinitrd.c

@@ -1,131 +0,0 @@
-/*
- * addinitrd - program to add a initrd image to an ecoff kernel
- *
- * (C) 1999 Thomas Bogendoerfer
- * minor modifications, cleanup: Guido Guenther <agx@sigxcpu.org>
- * further cleanup: Maciej W. Rozycki
- */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <netinet/in.h>
-
-#include "ecoff.h"
-
-#define MIPS_PAGE_SIZE	4096
-#define MIPS_PAGE_MASK	(MIPS_PAGE_SIZE-1)
-
-#define swab16(x) \
-        ((unsigned short)( \
-                (((unsigned short)(x) & (unsigned short)0x00ffU) << 8) | \
-                (((unsigned short)(x) & (unsigned short)0xff00U) >> 8) ))
-
-#define swab32(x) \
-        ((unsigned int)( \
-                (((unsigned int)(x) & (unsigned int)0x000000ffUL) << 24) | \
-                (((unsigned int)(x) & (unsigned int)0x0000ff00UL) <<  8) | \
-                (((unsigned int)(x) & (unsigned int)0x00ff0000UL) >>  8) | \
-                (((unsigned int)(x) & (unsigned int)0xff000000UL) >> 24) ))
-
-#define SWAB(a)	(swab ? swab32(a) : (a))
-
-void die(char *s)
-{
-	perror(s);
-	exit(1);
-}
-
-int main(int argc, char *argv[])
-{
-	int fd_vmlinux, fd_initrd, fd_outfile;
-	FILHDR efile;
-	AOUTHDR eaout;
-	SCNHDR esecs[3];
-	struct stat st;
-	char buf[1024];
-	unsigned long loadaddr;
-	unsigned long initrd_header[2];
-	int i, cnt;
-	int swab = 0;
-
-	if (argc != 4) {
-		printf("Usage: %s <vmlinux> <initrd> <outfile>\n", argv[0]);
-		exit(1);
-	}
-
-	if ((fd_vmlinux = open (argv[1], O_RDONLY)) < 0)
-		 die("open vmlinux");
-	if (read (fd_vmlinux, &efile, sizeof efile) != sizeof efile)
-		die("read file header");
-	if (read (fd_vmlinux, &eaout, sizeof eaout) != sizeof eaout)
-		die("read aout header");
-	if (read (fd_vmlinux, esecs, sizeof esecs) != sizeof esecs)
-		die("read section headers");
-	/*
-	 * check whether the file is good for us
-	 */
-	/* TBD */
-
-	/*
-	 * check, if we have to swab words
-	 */
-	if (ntohs(0xaa55) == 0xaa55) {
-		if (efile.f_magic == swab16(MIPSELMAGIC))
-			swab = 1;
-	} else {
-		if (efile.f_magic == swab16(MIPSEBMAGIC))
-			swab = 1;
-	}
-
-	/* make sure we have an empty data segment for the initrd */
-	if (eaout.dsize || esecs[1].s_size) {
-		fprintf(stderr, "Data segment not empty. Giving up!\n");
-		exit(1);
-	}
-	if ((fd_initrd = open (argv[2], O_RDONLY)) < 0)
-		die("open initrd");
-	if (fstat (fd_initrd, &st) < 0)
-		die("fstat initrd");
-	loadaddr = ((SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size)
-			+ MIPS_PAGE_SIZE-1) & ~MIPS_PAGE_MASK) - 8;
-	if (loadaddr < (SWAB(esecs[2].s_vaddr) + SWAB(esecs[2].s_size)))
-		loadaddr += MIPS_PAGE_SIZE;
-	initrd_header[0] = SWAB(0x494E5244);
-	initrd_header[1] = SWAB(st.st_size);
-	eaout.dsize = esecs[1].s_size = initrd_header[1] = SWAB(st.st_size+8);
-	eaout.data_start = esecs[1].s_vaddr = esecs[1].s_paddr = SWAB(loadaddr);
-
-	if ((fd_outfile = open (argv[3], O_RDWR|O_CREAT|O_TRUNC, 0666)) < 0)
-		die("open outfile");
-	if (write (fd_outfile, &efile, sizeof efile) != sizeof efile)
-		die("write file header");
-	if (write (fd_outfile, &eaout, sizeof eaout) != sizeof eaout)
-		die("write aout header");
-	if (write (fd_outfile, esecs, sizeof esecs) != sizeof esecs)
-		die("write section headers");
-	/* skip padding */
-	if(lseek(fd_vmlinux, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1)
-		die("lseek vmlinux");
-	if(lseek(fd_outfile, SWAB(esecs[0].s_scnptr), SEEK_SET) == (off_t)-1)
-		die("lseek outfile");
-	/* copy text segment */
-	cnt = SWAB(eaout.tsize);
-	while (cnt) {
-		if ((i = read (fd_vmlinux, buf, sizeof buf)) <= 0)
-			die("read vmlinux");
-		if (write (fd_outfile, buf, i) != i)
-			die("write vmlinux");
-		cnt -= i;
-	}
-	if (write (fd_outfile, initrd_header, sizeof initrd_header) != sizeof initrd_header)
-		die("write initrd header");
-	while ((i = read (fd_initrd, buf, sizeof buf)) > 0)
-		if (write (fd_outfile, buf, i) != i)
-			die("write initrd");
-	close(fd_vmlinux);
-	close(fd_initrd);
-	return 0;
-}

arch/mips/boot/compressed/Makefile

@@ -0,0 +1,100 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.
+#
+# Adapted for MIPS Pete Popov, Dan Malek
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Adapted for PowerPC by Gary Thomas
+# modified by Cort (cort@cs.nmt.edu)
+#
+# Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University
+# Author: Wu Zhangjin <wuzj@lemote.com>
+#
+
+# compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
+VMLINUX_SIZE := $(shell wc -c $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | cut -d' ' -f1)
+VMLINUX_SIZE := $(shell [ -n "$(VMLINUX_SIZE)" ] && echo $$(($(VMLINUX_SIZE) + (65536 - $(VMLINUX_SIZE) % 65536))))
+VMLINUZ_LOAD_ADDRESS := 0x$(shell [ -n "$(VMLINUX_SIZE)" ] && printf %x $$(($(VMLINUX_LOAD_ADDRESS) + $(VMLINUX_SIZE))))
+
+# set the default size of the mallocing area for decompressing
+BOOT_HEAP_SIZE := 0x400000
+
+# Disable Function Tracer
+KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")
+
+KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
+
+KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
+	-DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \
+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE)
+
+obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
+
+obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+
+OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
+$(obj)/vmlinux.bin: $(KBUILD_IMAGE)
+	$(call if_changed,objcopy)
+
+suffix_$(CONFIG_KERNEL_GZIP)  = gz
+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
+suffix_$(CONFIG_KERNEL_LZMA)  = lzma
+tool_$(CONFIG_KERNEL_GZIP)    = gzip
+tool_$(CONFIG_KERNEL_BZIP2)   = bzip2
+tool_$(CONFIG_KERNEL_LZMA)    = lzma
+$(obj)/vmlinux.$(suffix_y): $(obj)/vmlinux.bin
+	$(call if_changed,$(tool_y))
+
+$(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o
+	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) \
+		--add-section=.image=$< \
+		--set-section-flags=.image=contents,alloc,load,readonly,data \
+		$(obj)/dummy.o $@
+
+LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T
+vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o
+	$(call if_changed,ld)
+	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@
+
+#
+# Some DECstations need all possible sections of an ECOFF executable
+#
+ifdef CONFIG_MACH_DECSTATION
+  E2EFLAGS = -a
+else
+  E2EFLAGS =
+endif
+
+# elf2ecoff can only handle 32bit image
+
+ifdef CONFIG_32BIT
+	VMLINUZ = vmlinuz
+else
+	VMLINUZ = vmlinuz.32
+endif
+
+vmlinuz.32: vmlinuz
+	$(Q)$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
+
+vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ)
+	$(Q)$(obj)/../elf2ecoff $(VMLINUZ) vmlinuz.ecoff $(E2EFLAGS)
+
+$(obj)/../elf2ecoff: $(src)/../elf2ecoff.c
+	$(Q)$(HOSTCC) -o $@ $^
+
+drop-sections	= .reginfo .mdebug .comment .note .pdr .options .MIPS.options
+strip-flags	= $(addprefix --remove-section=,$(drop-sections))
+
+OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags)
+vmlinuz.bin: vmlinuz
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags)
+vmlinuz.srec: vmlinuz
+	$(call if_changed,objcopy)
+
+clean:
+clean-files += *.o \
+	       vmlinu*

arch/mips/boot/compressed/dbg.c

@@ -0,0 +1,37 @@
+/*
+ * MIPS-specific debug support for pre-boot environment
+ *
+ * NOTE: putc() is board specific, if your board have a 16550 compatible uart,
+ * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
+ * need to implement your own putc().
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+
+void __attribute__ ((weak)) putc(char c)
+{
+}
+
+void puts(const char *s)
+{
+	char c;
+	while ((c = *s++) != '\0') {
+		putc(c);
+		if (c == '\n')
+			putc('\r');
+	}
+}
+
+void puthex(unsigned long long val)
+{
+
+	unsigned char buf[10];
+	int i;
+	for (i = 7; i >= 0; i--) {
+		buf[i] = "0123456789ABCDEF"[val & 0x0F];
+		val >>= 4;
+	}
+	buf[8] = '\0';
+	puts(buf);
+}

arch/mips/boot/compressed/decompress.c

@@ -0,0 +1,126 @@
+/*
+ * Misc. bootloader code for many machines.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Matt Porter <mporter@mvista.com> Derived from
+ * arch/ppc/boot/prep/misc.c
+ *
+ * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <asm/addrspace.h>
+
+/* These two variables specify the free mem region
+ * that can be used for temporary malloc area
+ */
+unsigned long free_mem_ptr;
+unsigned long free_mem_end_ptr;
+char *zimage_start;
+
+/* The linker tells us where the image is. */
+extern unsigned char __image_begin, __image_end;
+extern unsigned char __ramdisk_begin, __ramdisk_end;
+unsigned long initrd_size;
+
+/* debug interfaces  */
+extern void puts(const char *s);
+extern void puthex(unsigned long long val);
+
+void error(char *x)
+{
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted");
+
+	while (1)
+		;	/* Halt */
+}
+
+/* activate the code for pre-boot environment */
+#define STATIC static
+
+#ifdef CONFIG_KERNEL_GZIP
+void *memcpy(void *dest, const void *src, size_t n)
+{
+	int i;
+	const char *s = src;
+	char *d = dest;
+
+	for (i = 0; i < n; i++)
+		d[i] = s[i];
+	return dest;
+}
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+void *memset(void *s, int c, size_t n)
+{
+	int i;
+	char *ss = s;
+
+	for (i = 0; i < n; i++)
+		ss[i] = c;
+	return s;
+}
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+void decompress_kernel(unsigned long boot_heap_start)
+{
+	int zimage_size;
+
+	/*
+	 * We link ourself to an arbitrary low address.  When we run, we
+	 * relocate outself to that address.  __image_beign points to
+	 * the part of the image where the zImage is. -- Tom
+	 */
+	zimage_start = (char *)(unsigned long)(&__image_begin);
+	zimage_size = (unsigned long)(&__image_end) -
+	    (unsigned long)(&__image_begin);
+
+	/*
+	 * The zImage and initrd will be between start and _end, so they've
+	 * already been moved once.  We're good to go now. -- Tom
+	 */
+	puts("zimage at:     ");
+	puthex((unsigned long)zimage_start);
+	puts(" ");
+	puthex((unsigned long)(zimage_size + zimage_start));
+	puts("\n");
+
+	if (initrd_size) {
+		puts("initrd at:     ");
+		puthex((unsigned long)(&__ramdisk_begin));
+		puts(" ");
+		puthex((unsigned long)(&__ramdisk_end));
+		puts("\n");
+	}
+
+	/* this area are prepared for mallocing when decompressing */
+	free_mem_ptr = boot_heap_start;
+	free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;
+
+	/* Display standard Linux/MIPS boot prompt for kernel args */
+	puts("Uncompressing Linux at load address ");
+	puthex(VMLINUX_LOAD_ADDRESS_ULL);
+	puts("\n");
+	/* Decompress the kernel with according algorithm */
+	decompress(zimage_start, zimage_size, 0, 0,
+		   (void *)VMLINUX_LOAD_ADDRESS_ULL, 0, error);
+	/* FIXME: is there a need to flush cache here? */
+	puts("Now, booting the kernel...\n");
+}

arch/mips/boot/compressed/dummy.c

@@ -0,0 +1,4 @@
+int main(void)
+{
+	return 0;
+}

arch/mips/boot/compressed/head.S

@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf Electronics
+ * Written by Ralf Baechle and Andreas Busse
+ * Copyright (C) 1995 - 1999 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Modified for DECStation and hence R3000 support by Paul M. Antoine
+ * Further modifications by David S. Miller and Harald Koerfgen
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+	.set noreorder
+	.cprestore
+	LEAF(start)
+start:
+	/* Save boot rom start args */
+	move	s0, a0
+	move	s1, a1
+	move	s2, a2
+	move	s3, a3
+
+	/* Clear BSS */
+	PTR_LA	a0, _edata
+	PTR_LA	a2, _end
+1:	sw	zero, 0(a0)
+	bne	a2, a0, 1b
+	 addiu	a0, a0, 4
+
+	PTR_LA	a0, (.heap)          /* heap address */
+	PTR_LA  sp, (.stack + 8192)  /* stack address */
+
+	PTR_LA	ra, 2f
+	PTR_LA	k0, decompress_kernel
+	jr	k0
+	 nop
+2:
+	move	a0, s0
+	move	a1, s1
+	move	a2, s2
+	move	a3, s3
+	PTR_LI	k0, KERNEL_ENTRY
+	jr	k0
+	 nop
+3:
+	b	3b
+	 nop
+	END(start)
+
+	.comm .heap,BOOT_HEAP_SIZE,4
+	.comm .stack,4096*2,4

arch/mips/boot/compressed/ld.script

@@ -0,0 +1,150 @@
+OUTPUT_ARCH(mips)
+ENTRY(start)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  .init          : { *(.init)		} =0
+  .text      :
+  {
+    _ftext = . ;
+    *(.text)
+    *(.rodata)
+    *(.rodata1)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+  } =0
+  .kstrtab : { *(.kstrtab) }
+
+  . = ALIGN(16);		/* Exception table */
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  __start___dbe_table = .;	/* Exception table for data bus errors */
+  __dbe_table : { *(__dbe_table) }
+  __stop___dbe_table = .;
+
+  __start___ksymtab = .;	/* Kernel symbol table */
+  __ksymtab : { *(__ksymtab) }
+  __stop___ksymtab = .;
+
+  _etext = .;
+
+  . = ALIGN(8192);
+  .data.init_task : { *(.data.init_task) }
+
+  /* Startup code */
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(16);
+  __setup_start = .;
+  .setup.init : { *(.setup.init) }
+  __setup_end = .;
+  __initcall_start = .;
+  .initcall.init : { *(.initcall.init) }
+  __initcall_end = .;
+  . = ALIGN(4096);	/* Align double page for init_task_union */
+  __init_end = .;
+
+  . = ALIGN(4096);
+  .data.page_aligned : { *(.data.idt) }
+
+  . = ALIGN(32);
+  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+  .fini      : { *(.fini)    } =0
+  .reginfo : { *(.reginfo) }
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  It would
+     be more correct to do this:
+       . = .;
+     The current expression does not correctly handle the case of a
+     text segment ending precisely at the end of a page; it causes the
+     data segment to skip a page.  The above expression does not have
+     this problem, but it will currently (2/95) cause BFD to allocate
+     a single segment, combining both text and data, for this case.
+     This will prevent the text segment from being shared among
+     multiple executions of the program; I think that is more
+     important than losing a page of the virtual address space (note
+     that no actual memory is lost; the page which is skipped can not
+     be referenced).  */
+  . = .;
+  .data    :
+  {
+    _fdata = . ;
+    *(.data)
+
+   /* Put the compressed image here, so bss is on the end. */
+   __image_begin = .;
+   *(.image)
+   __image_end = .;
+   /* Align the initial ramdisk image (INITRD) on page boundaries. */
+   . = ALIGN(4096);
+   __ramdisk_begin = .;
+   *(.initrd)
+   __ramdisk_end = .;
+   . = ALIGN(4096);
+
+    CONSTRUCTORS
+  }
+  .data1   : { *(.data1) }
+  _gp = . + 0x8000;
+  .lit8 : { *(.lit8) }
+  .lit4 : { *(.lit4) }
+  .ctors         : { *(.ctors)   }
+  .dtors         : { *(.dtors)   }
+  .got           : { *(.got.plt) *(.got) }
+  .dynamic       : { *(.dynamic) }
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata     : { *(.sdata) }
+  . = ALIGN(4);
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __bss_start = .;
+  _fbss = .;
+  .sbss      : { *(.sbss) *(.scommon) }
+  .bss       :
+  {
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   .  = ALIGN(4);
+  _end = . ;
+  PROVIDE (end = .);
+  }
+
+  /* Sections to be discarded */
+  /DISCARD/ :
+  {
+        *(.text.exit)
+        *(.data.exit)
+        *(.exitcall.exit)
+  }
+
+  /* This is the MIPS specific mdebug section.  */
+  .mdebug : { *(.mdebug) }
+  /* These are needed for ELF backends which have not yet been
+     converted to the new style linker.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  /* DWARF debug sections.
+     Symbols in the .debug DWARF section are relative to the beginning of the
+     section so we begin .debug at 0.  It's not clear yet what needs to happen
+     for the others.   */
+  .debug          0 : { *(.debug) }
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  .line           0 : { *(.line) }
+  /* These must appear regardless of  .  */
+  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
+  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
+  .comment : { *(.comment) }
+  .note : { *(.note) }
+}

arch/mips/boot/compressed/uart-16550.c

@@ -0,0 +1,43 @@
+/*
+ * 16550 compatible uart based serial debug support for zboot
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <linux/init.h>
+
+#include <asm/addrspace.h>
+
+#if defined(CONFIG_MACH_LOONGSON) || defined(CONFIG_MIPS_MALTA)
+#define UART_BASE 0x1fd003f8
+#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset))
+#endif
+
+#ifdef CONFIG_AR7
+#include <ar7.h>
+#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
+#endif
+
+#ifndef PORT
+#error please define the serial port address for your own machine
+#endif
+
+static inline unsigned int serial_in(int offset)
+{
+	return *((char *)PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+	*((char *)PORT(offset)) = value;
+}
+
+void putc(char c)
+{
+	int timeout = 1024;
+
+	while (((serial_in(UART_LSR) & UART_LSR_THRE) == 0) && (timeout-- > 0))
+		;
+
+	serial_out(UART_TX, c);
+}

arch/mips/cavium-octeon/Makefile

@@ -9,7 +9,7 @@
 # Copyright (C) 2005-2009 Cavium Networks
 #
 
-obj-y := setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
+obj-y := cpu.o setup.o serial.o octeon-platform.o octeon-irq.o csrc-octeon.o
 obj-y += dma-octeon.o flash_setup.o
 obj-y += octeon-memcpy.o
 

arch/mips/cavium-octeon/cpu.c

@@ -0,0 +1,52 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/notifier.h>
+#include <linux/prefetch.h>
+#include <linux/sched.h>
+
+#include <asm/cop2.h>
+#include <asm/current.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+#include <asm/octeon/octeon.h>
+
+static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action,
+	void *data)
+{
+	unsigned long flags;
+	unsigned int status;
+
+	switch (action) {
+	case CU2_EXCEPTION:
+		prefetch(&current->thread.cp2);
+		local_irq_save(flags);
+		KSTK_STATUS(current) |= ST0_CU2;
+		status = read_c0_status();
+		write_c0_status(status | ST0_CU2);
+		octeon_cop2_restore(&(current->thread.cp2));
+		write_c0_status(status & ~ST0_CU2);
+		local_irq_restore(flags);
+
+		return NOTIFY_BAD;	/* Don't call default notifier */
+	}
+
+	return NOTIFY_OK;		/* Let default notifier send signals */
+}
+
+static struct notifier_block cnmips_cu2_notifier = {
+	.notifier_call = cnmips_cu2_call,
+};
+
+static int cnmips_cu2_setup(void)
+{
+	return register_cu2_notifier(&cnmips_cu2_notifier);
+}
+early_initcall(cnmips_cu2_setup);

arch/mips/cavium-octeon/octeon-platform.c

@@ -159,6 +159,94 @@ out:
 }
 device_initcall(octeon_rng_device_init);
 
+/* Octeon SMI/MDIO interface.  */
+static int __init octeon_mdiobus_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+
+	if (octeon_is_simulation())
+		return 0; /* No mdio in the simulator. */
+
+	/* The bus number is the platform_device id.  */
+	pd = platform_device_alloc("mdio-octeon", 0);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto fail;
+
+	return ret;
+fail:
+	platform_device_put(pd);
+
+out:
+	return ret;
+
+}
+device_initcall(octeon_mdiobus_device_init);
+
+/* Octeon mgmt port Ethernet interface.  */
+static int __init octeon_mgmt_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+	int port, num_ports;
+
+	struct resource mgmt_port_resource = {
+		.flags	= IORESOURCE_IRQ,
+		.start	= -1,
+		.end	= -1
+	};
+
+	if (!OCTEON_IS_MODEL(OCTEON_CN56XX) && !OCTEON_IS_MODEL(OCTEON_CN52XX))
+		return 0;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX))
+		num_ports = 1;
+	else
+		num_ports = 2;
+
+	for (port = 0; port < num_ports; port++) {
+		pd = platform_device_alloc("octeon_mgmt", port);
+		if (!pd) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		switch (port) {
+		case 0:
+			mgmt_port_resource.start = OCTEON_IRQ_MII0;
+			break;
+		case 1:
+			mgmt_port_resource.start = OCTEON_IRQ_MII1;
+			break;
+		default:
+			BUG();
+		}
+		mgmt_port_resource.end = mgmt_port_resource.start;
+
+		ret = platform_device_add_resources(pd, &mgmt_port_resource, 1);
+
+		if (ret)
+			goto fail;
+
+		ret = platform_device_add(pd);
+		if (ret)
+			goto fail;
+	}
+	return ret;
+fail:
+	platform_device_put(pd);
+
+out:
+	return ret;
+
+}
+device_initcall(octeon_mgmt_device_init);
+
 MODULE_AUTHOR("David Daney <ddaney@caviumnetworks.com>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Platform driver for Octeon SOC");

arch/mips/configs/ar7_defconfig

@@ -10,7 +10,6 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 CONFIG_AR7=y
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -265,7 +264,6 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_PROBE_INITRD_HEADER=y
 # CONFIG_FREEZER is not set
 
 #
@@ -1053,7 +1051,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/bcm47xx_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 CONFIG_BCM47XX=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1853,7 +1852,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/bcm63xx_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 CONFIG_BCM63XX=y
 # CONFIG_MIPS_COBALT is not set
@@ -942,7 +941,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/bigsur_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1237,7 +1236,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_SB1XXX_CORELIS is not set
 # CONFIG_RUNTIME_DEBUG is not set

arch/mips/configs/capcella_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -783,7 +782,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/cavium-octeon_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -269,7 +268,6 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PROBE_INITRD_HEADER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -822,7 +820,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 

arch/mips/configs/cobalt_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
@@ -1126,7 +1125,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/db1000_defconfig

@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1090,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/db1100_defconfig

@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1090,7 +1089,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/db1200_defconfig

@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y
 # CONFIG_MIPS_DB1550 is not set
 CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1172,7 +1171,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="mem=48M"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/db1500_defconfig

@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1390,7 +1389,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/db1550_defconfig

@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y
 CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1207,7 +1206,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/decstation_defconfig

@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
 # CONFIG_MACH_JAZZ is not set
@@ -882,7 +881,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/e55_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -561,7 +560,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/excite_defconfig

@@ -1,1335 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:31 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-CONFIG_BASLER_EXCITE=y
-# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_COHERENT=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_CPU_RM7K=y
-CONFIG_IRQ_CPU_RM9K=y
-CONFIG_MIPS_RM9122=y
-CONFIG_SERIAL_RM9000=y
-CONFIG_GPI_RM9000=y
-CONFIG_WDT_RM9000=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-CONFIG_CPU_RM9000=y
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM9000=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_BASLER_EXCITE is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WDT_RM9K_GPI=m
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_DES is not set
-CONFIG_CRYPTO_FCRYPT=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y

arch/mips/configs/fuloong2e_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Thu Jul  2 22:37:00 2009
+# Linux kernel version: 2.6.32-rc4
+# Fri Oct 16 13:18:01 2009
 #
 CONFIG_MIPS=y
 
@@ -10,8 +10,8 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_AR7 is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -105,6 +105,8 @@ CONFIG_CPU_LOONGSON2E=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
 # CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
 CONFIG_CPU_LOONGSON2=y
 CONFIG_SYS_HAS_CPU_LOONGSON2E=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
@@ -135,12 +137,16 @@ CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
+# CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PHYS_ADDR_T_64BIT=y
@@ -148,6 +154,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
@@ -180,6 +187,12 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="-fuloong2e"
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -193,11 +206,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -235,18 +249,16 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_SYSCALL_WRAPPERS=y
@@ -255,8 +267,8 @@ CONFIG_HAVE_SYSCALL_WRAPPERS=y
 # GCOV-based kernel profiling
 #
 # CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
@@ -283,7 +295,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -321,9 +333,14 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
 # CONFIG_SUSPEND is not set
-# CONFIG_HIBERNATION is not set
+CONFIG_HIBERNATION_NVS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="/dev/hda3"
+# CONFIG_PM_RUNTIME is not set
 CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
 
 #
 # Networking options
@@ -442,6 +459,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -473,6 +491,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -481,7 +500,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 CONFIG_NET_9P=m
@@ -495,6 +513,7 @@ CONFIG_NET_9P=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -504,9 +523,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -820,6 +839,7 @@ CONFIG_8139TOO=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -867,10 +887,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -886,6 +903,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_CDC_PHONET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -933,12 +951,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -946,6 +968,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -1015,6 +1038,7 @@ CONFIG_RTC=y
 CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -1070,9 +1094,6 @@ CONFIG_I2C_VIAPRO=m
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1088,7 +1109,6 @@ CONFIG_I2C_VIAPRO=m
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1105,6 +1125,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -1114,6 +1135,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1198,6 +1220,7 @@ CONFIG_FONT_8x16=y
 # CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1304,7 +1327,6 @@ CONFIG_SND_USB=y
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 CONFIG_HIDRAW=y
 
 #
@@ -1356,6 +1378,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_ISP1760_HCD=m
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1453,6 +1476,7 @@ CONFIG_UIO_CIF=m
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_AEC is not set
 # CONFIG_UIO_SERCOS3 is not set
+# CONFIG_UIO_PCI_GENERIC is not set
 
 #
 # TI VLYNQ
@@ -1469,10 +1493,10 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_EXT4_FS=m
-CONFIG_EXT4DEV_COMPAT=y
 CONFIG_EXT4_FS_XATTR=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_FS_XIP=y
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
@@ -1489,6 +1513,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1557,7 +1582,6 @@ CONFIG_OMFS_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1666,6 +1690,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=2048
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1678,13 +1703,14 @@ CONFIG_NOP_TRACER=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options
@@ -1742,11 +1768,13 @@ CONFIG_CRYPTO_XTS=m
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/mips/configs/ip22_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1188,7 +1187,7 @@ CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DYNAMIC_PRINTK_DEBUG=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/ip27_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -940,7 +939,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/ip28_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -816,7 +815,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/ip32_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1126,7 +1125,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/jazz_defconfig

@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 CONFIG_MACH_JAZZ=y
@@ -1374,7 +1373,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/jmr3927_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -835,7 +834,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/lasat_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -798,7 +797,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/lemote2f_defconfig

@@ -0,0 +1,1835 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Mon Nov  9 23:42:42 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_MACH_LOONGSON=y
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_LEMOTE_FULOONG2E is not set
+CONFIG_LEMOTE_MACH2F=y
+CONFIG_CS5536=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2E is not set
+CONFIG_CPU_LOONGSON2F=y
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
+CONFIG_CPU_LOONGSON2=y
+CONFIG_SYS_HAS_CPU_LOONGSON2F=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+# CONFIG_PAGE_SIZE_4KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PAGE_SIZE_16KB=y
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_BINFMT_ELF32=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION_NVS=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION="/dev/hda3"
+# CONFIG_PM_RUNTIME is not set
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+CONFIG_DEFAULT_BIC=y
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="bic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+# CONFIG_NET_EMATCH_U32 is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_TEXT is not set
+CONFIG_NET_CLS_ACT=y
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=m
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_IFB is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_TC35815 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_TUNE_TWISTER=y
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+CONFIG_WLAN_PRE80211=y
+# CONFIG_STRIP is not set
+# CONFIG_WAVELAN is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_PS2_ALPS is not set
+# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+# CONFIG_MOUSE_PS2_TRACKPOINT is not set
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=16
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_FOURPORT=y
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+CONFIG_MEDIA_SUPPORT=m
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_STRADIS is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_BOOT_VESA_SUPPORT=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+CONFIG_FB_SIS=y
+CONFIG_FB_SIS_300=y
+CONFIG_FB_SIS_315=y
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_7x14=y
+CONFIG_FONT_PEARL_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_FONT_SUN8x16=y
+CONFIG_FONT_SUN12x22=y
+CONFIG_FONT_10x18=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+CONFIG_SND_CS5535AUDIO=m
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_ET131X is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_ALTERA_PCIE_CHDMA is not set
+# CONFIG_RTL8187SE is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_B3DFG is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_VME_BUS is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+CONFIG_FB_SM7XX=y
+CONFIG_FB_SM7XX_ACCEL=y
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf-8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/mips/configs/malta_defconfig

@@ -10,7 +10,6 @@ CONFIG_MIPS=y
 #
 CONFIG_ZONE_DMA=y
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1591,7 +1590,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/markeins_defconfig

@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1366,7 +1365,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200 mem=192m ip=bootp root=/dev/nfs rw"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/mipssim_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -635,7 +634,9 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="nfsroot=192.168.192.169:/u1/mipsel,timeo=20 ip=dhcp"
+# CONFIG_CMDLINE_OVERRIDE is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 

arch/mips/configs/mpc30x_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -817,7 +816,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/msp71xx_defconfig

@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1412,7 +1411,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set

arch/mips/configs/mtx1_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 CONFIG_MACH_ALCHEMY=y
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -3018,7 +3017,7 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/pb1100_defconfig

@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1083,7 +1082,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/pb1500_defconfig

@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1200,7 +1199,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/pb1550_defconfig

@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1193,7 +1192,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/pnx8335-stb225_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1034,7 +1033,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KERNEL_TESTS is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/pnx8550-jbs_defconfig

@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1215,7 +1214,9 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
+# CONFIG_CMDLINE_OVERRIDE is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 

arch/mips/configs/pnx8550-stb810_defconfig

@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1205,7 +1204,9 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
+# CONFIG_CMDLINE_OVERRIDE is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 

arch/mips/configs/powertv_defconfig

@@ -0,0 +1,1550 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc5
+# Fri Aug 28 14:49:33 2009
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+CONFIG_POWERTV=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIN_RUNTIME_RESOURCES is not set
+# CONFIG_BOOTLOADER_DRIVER is not set
+CONFIG_BOOTLOADER_FAMILY="R2"
+CONFIG_CSRC_POWERTV=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CEVT_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_MIPSR2_IRQ_EI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_HIGHMEM is not set
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+CONFIG_HZ_1000=y
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=1000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+CONFIG_TIMERFD=y
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=y
+CONFIG_INET6_TUNNEL=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_TUNNEL=y
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=y
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=y
+CONFIG_IP_NF_ARPFILTER=y
+# CONFIG_IP_NF_ARP_MANGLE is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=y
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_LOG is not set
+CONFIG_IP6_NF_FILTER=y
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=y
+CONFIG_BRIDGE=y
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+CONFIG_NET_SCH_TBF=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_DRR is not set
+
+#
+# Classification
+#
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_FW is not set
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+CONFIG_USB_SERIAL_CP210X=y
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10.0.1.1:255.255.255.0:zeus:eth0: root=/dev/nfs nfsroot=/nfsroot/cramfs,wsize=512,rsize=512,tcp nokgdb console=ttyUSB0,115200 memsize=252M"
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/mips/configs/rb532_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1204,7 +1203,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/rbtx49xx_defconfig

@@ -10,7 +10,6 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_AR7 is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
@@ -284,7 +283,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PROBE_INITRD_HEADER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -1063,7 +1061,7 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/rm200_defconfig

@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -1694,7 +1693,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Security options

arch/mips/configs/sb1250-swarm_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -961,7 +960,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_SB1XXX_CORELIS is not set
 
 #

arch/mips/configs/tb0219_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -892,7 +891,9 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/tb0226_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -895,7 +894,9 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/tb0287_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
@@ -1077,7 +1076,9 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/workpad_defconfig

@@ -9,7 +9,6 @@ CONFIG_MIPS=y
 # Machine selection
 #
 # CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -755,7 +754,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/wrppmc_defconfig

@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -887,7 +886,9 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200n8"
+# CONFIG_CMDLINE_OVERRIDE is not set
 
 #
 # Security options

arch/mips/configs/yosemite_defconfig

@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_DB1550 is not set
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -824,7 +823,7 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_RUNTIME_DEBUG is not set
 

arch/mips/fw/arc/cmdline.c

@@ -16,11 +16,6 @@
 
 #undef DEBUG_CMDLINE
 
-char * __init prom_getcmdline(void)
-{
-	return arcs_cmdline;
-}
-
 static char *ignored[] = {
 	"ConsoleIn=",
 	"ConsoleOut=",

arch/mips/include/asm/bootinfo.h

@@ -67,9 +67,9 @@
 #define MACH_LEMOTE_ML2F7      3
 #define MACH_LEMOTE_YL2F89     4
 #define MACH_DEXXON_GDIUM2F10  5
-#define MACH_LOONGSON_END      6
-
-#define CL_SIZE			COMMAND_LINE_SIZE
+#define MACH_LEMOTE_NAS        6
+#define MACH_LEMOTE_LL2F       7
+#define MACH_LOONGSON_END      8
 
 extern char *system_type;
 const char *get_system_type(void);
@@ -107,7 +107,7 @@ extern void free_init_pages(const char *what,
 /*
  * Initial kernel command line, usually setup by prom_init()
  */
-extern char arcs_cmdline[CL_SIZE];
+extern char arcs_cmdline[COMMAND_LINE_SIZE];
 
 /*
  * Registers a0, a1, a3 and a4 as passed to the kernel entry by firmware

arch/mips/include/asm/clock.h

@@ -0,0 +1,64 @@
+#ifndef __ASM_MIPS_CLOCK_H
+#define __ASM_MIPS_CLOCK_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/clk.h>
+
+extern void (*cpu_wait) (void);
+
+struct clk;
+
+struct clk_ops {
+	void (*init) (struct clk *clk);
+	void (*enable) (struct clk *clk);
+	void (*disable) (struct clk *clk);
+	void (*recalc) (struct clk *clk);
+	int (*set_rate) (struct clk *clk, unsigned long rate, int algo_id);
+	long (*round_rate) (struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+	struct list_head node;
+	const char *name;
+	int id;
+	struct module *owner;
+
+	struct clk *parent;
+	struct clk_ops *ops;
+
+	struct kref kref;
+
+	unsigned long rate;
+	unsigned long flags;
+};
+
+#define CLK_ALWAYS_ENABLED	(1 << 0)
+#define CLK_RATE_PROPAGATES	(1 << 1)
+
+/* Should be defined by processor-specific code */
+void arch_init_clk_ops(struct clk_ops **, int type);
+
+int clk_init(void);
+
+int __clk_enable(struct clk *);
+void __clk_disable(struct clk *);
+
+void clk_recalc_rate(struct clk *);
+
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+
+/* the exported API, in addition to clk_set_rate */
+/**
+ * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ * @algo_id: algorithm id to be passed down to ops->set_rate
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
+
+#endif				/* __ASM_MIPS_CLOCK_H */

arch/mips/include/asm/cop2.h

@@ -0,0 +1,23 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#ifndef __ASM_COP2_H
+#define __ASM_COP2_H
+
+enum cu2_ops {
+	CU2_EXCEPTION,
+	CU2_LWC2_OP,
+	CU2_LDC2_OP,
+	CU2_SWC2_OP,
+	CU2_SDC2_OP,
+};
+
+extern int register_cu2_notifier(struct notifier_block *nb);
+extern int cu2_notifier_call_chain(unsigned long val, void *v);
+
+#endif /* __ASM_COP2_H */

arch/mips/include/asm/cpu.h

@@ -154,6 +154,8 @@
 #define PRID_REV_VR4181A	0x0070	/* Same as VR4122 */
 #define PRID_REV_VR4130		0x0080
 #define PRID_REV_34K_V1_0_2	0x0022
+#define PRID_REV_LOONGSON2E	0x0002
+#define PRID_REV_LOONGSON2F	0x0003
 
 /*
  * Older processors used to encode processor version and revision in two

arch/mips/include/asm/fpu.h

@@ -28,15 +28,7 @@
 struct sigcontext;
 struct sigcontext32;
 
-extern asmlinkage int (*save_fp_context)(struct sigcontext __user *sc);
-extern asmlinkage int (*restore_fp_context)(struct sigcontext __user *sc);
-
-extern asmlinkage int (*save_fp_context32)(struct sigcontext32 __user *sc);
-extern asmlinkage int (*restore_fp_context32)(struct sigcontext32 __user *sc);
-
 extern void fpu_emulator_init_fpu(void);
-extern int fpu_emulator_save_context(struct sigcontext __user *sc);
-extern int fpu_emulator_restore_context(struct sigcontext __user *sc);
 extern void _init_fpu(void);
 extern void _save_fp(struct task_struct *);
 extern void _restore_fp(struct task_struct *);

arch/mips/include/asm/fpu_emulator.h

@@ -25,17 +25,27 @@
 
 #include <asm/break.h>
 #include <asm/inst.h>
+#include <asm/local.h>
+
+#ifdef CONFIG_DEBUG_FS
 
 struct mips_fpu_emulator_stats {
-	unsigned int emulated;
-	unsigned int loads;
-	unsigned int stores;
-	unsigned int cp1ops;
-	unsigned int cp1xops;
-	unsigned int errors;
+	local_t emulated;
+	local_t loads;
+	local_t stores;
+	local_t cp1ops;
+	local_t cp1xops;
+	local_t errors;
 };
 
-extern struct mips_fpu_emulator_stats fpuemustats;
+DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
+
+#define MIPS_FPU_EMU_INC_STATS(M)					\
+	cpu_local_wrap(__local_inc(&__get_cpu_var(fpuemustats).M))
+
+#else
+#define MIPS_FPU_EMU_INC_STATS(M) do { } while (0)
+#endif /* CONFIG_DEBUG_FS */
 
 extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
 	unsigned long cpc);

arch/mips/include/asm/ftrace.h

@@ -1 +1,90 @@
-/* empty */
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ *
+ * Copyright (C) 2009 DSLab, Lanzhou University, China
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
+#ifndef _ASM_MIPS_FTRACE_H
+#define _ASM_MIPS_FTRACE_H
+
+#ifdef CONFIG_FUNCTION_TRACER
+
+#define MCOUNT_ADDR ((unsigned long)(_mcount))
+#define MCOUNT_INSN_SIZE 4		/* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#define mcount _mcount
+
+#define safe_load(load, src, dst, error)		\
+do {							\
+	asm volatile (					\
+		"1: " load " %[" STR(dst) "], 0(%[" STR(src) "])\n"\
+		"   li %[" STR(error) "], 0\n"		\
+		"2:\n"					\
+							\
+		".section .fixup, \"ax\"\n"		\
+		"3: li %[" STR(error) "], 1\n"		\
+		"   j 2b\n"				\
+		".previous\n"				\
+							\
+		".section\t__ex_table,\"a\"\n\t"	\
+		STR(PTR) "\t1b, 3b\n\t"			\
+		".previous\n"				\
+							\
+		: [dst] "=&r" (dst), [error] "=r" (error)\
+		: [src] "r" (src)			\
+		: "memory"				\
+	);						\
+} while (0)
+
+#define safe_store(store, src, dst, error)	\
+do {						\
+	asm volatile (				\
+		"1: " store " %[" STR(src) "], 0(%[" STR(dst) "])\n"\
+		"   li %[" STR(error) "], 0\n"	\
+		"2:\n"				\
+						\
+		".section .fixup, \"ax\"\n"	\
+		"3: li %[" STR(error) "], 1\n"	\
+		"   j 2b\n"			\
+		".previous\n"			\
+						\
+		".section\t__ex_table,\"a\"\n\t"\
+		STR(PTR) "\t1b, 3b\n\t"		\
+		".previous\n"			\
+						\
+		: [error] "=r" (error)		\
+		: [dst] "r" (dst), [src] "r" (src)\
+		: "memory"			\
+	);					\
+} while (0)
+
+#define safe_load_code(dst, src, error) \
+	safe_load(STR(lw), src, dst, error)
+#define safe_store_code(src, dst, error) \
+	safe_store(STR(sw), src, dst, error)
+
+#define safe_load_stack(dst, src, error) \
+	safe_load(STR(PTR_L), src, dst, error)
+
+#define safe_store_stack(src, dst, error) \
+	safe_store(STR(PTR_S), src, dst, error)
+
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+	return addr;
+}
+
+struct dyn_arch_ftrace {
+};
+
+#endif /*  CONFIG_DYNAMIC_FTRACE */
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_FUNCTION_TRACER */
+#endif /* _ASM_MIPS_FTRACE_H */

arch/mips/include/asm/irq.h

@@ -113,36 +113,11 @@ do {									\
 
 #endif
 
-/*
- * do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- *
- * Ideally there should be away to get this into kernel/irq/handle.c to
- * avoid the overhead of a call for just a tiny function ...
- */
-#define do_IRQ(irq)							\
-do {									\
-	irq_enter();							\
-	__DO_IRQ_SMTC_HOOK(irq);					\
-	generic_handle_irq(irq);					\
-	irq_exit();							\
-} while (0)
+extern void do_IRQ(unsigned int irq);
 
 #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-/*
- * To avoid inefficient and in some cases pathological re-checking of
- * IRQ affinity, we have this variant that skips the affinity check.
- */
-
 
-#define do_IRQ_no_affinity(irq)						\
-do {									\
-	irq_enter();							\
-	__NO_AFFINITY_IRQ_SMTC_HOOK(irq);				\
-	generic_handle_irq(irq);					\
-	irq_exit();							\
-} while (0)
+extern void do_IRQ_no_affinity(unsigned int irq);
 
 #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
 

arch/mips/include/asm/mach-excite/cpu-feature-overrides.h

@@ -1,48 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
-
-/*
- * Basler eXcite has an RM9122 processor.
- */
-#define cpu_has_watch		1
-#define cpu_has_mips16		0
-#define cpu_has_divec		0
-#define cpu_has_vce		0
-#define cpu_has_cache_cdex_p	0
-#define cpu_has_cache_cdex_s	0
-#define cpu_has_prefetch	1
-#define cpu_has_mcheck		0
-#define cpu_has_ejtag		0
-
-#define cpu_has_llsc		1
-#define cpu_has_vtag_icache	0
-#define cpu_has_dc_aliases	0
-#define cpu_has_ic_fills_f_dc	0
-#define cpu_has_dsp		0
-#define cpu_icache_snoops_remote_store	0
-#define cpu_has_mipsmt		0
-#define cpu_has_userlocal	0
-
-#define cpu_has_nofpuex		0
-#define cpu_has_64bits		1
-
-#define cpu_has_mips32r1	0
-#define cpu_has_mips32r2	0
-#define cpu_has_mips64r1	0
-#define cpu_has_mips64r2	0
-
-#define cpu_has_inclusive_pcaches	0
-
-#define cpu_dcache_line_size()	32
-#define cpu_icache_line_size()	32
-#define cpu_scache_line_size()	32
-
-#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-excite/excite.h

@@ -1,154 +0,0 @@
-#ifndef __EXCITE_H__
-#define __EXCITE_H__
-
-#include <linux/init.h>
-#include <asm/addrspace.h>
-#include <asm/types.h>
-
-#define EXCITE_CPU_EXT_CLOCK 100000000
-
-#if !defined(__ASSEMBLY__)
-void __init excite_kgdb_init(void);
-void excite_procfs_init(void);
-extern unsigned long memsize;
-extern char modetty[];
-extern u32 unit_id;
-#endif
-
-/* Base name for XICAP devices */
-#define XICAP_NAME	"xicap_gpi"
-
-/* OCD register offsets */
-#define LKB0		0x0038
-#define LKB5		0x0128
-#define LKM5		0x012C
-#define LKB7		0x0138
-#define LKM7		0x013c
-#define LKB8		0x0140
-#define LKM8		0x0144
-#define LKB9		0x0148
-#define LKM9		0x014c
-#define LKB10		0x0150
-#define LKM10		0x0154
-#define LKB11		0x0158
-#define LKM11		0x015c
-#define LKB12		0x0160
-#define LKM12		0x0164
-#define LKB13		0x0168
-#define LKM13		0x016c
-#define LDP0		0x0200
-#define LDP1		0x0210
-#define LDP2		0x0220
-#define LDP3		0x0230
-#define INTPIN0		0x0A40
-#define INTPIN1		0x0A44
-#define INTPIN2		0x0A48
-#define INTPIN3		0x0A4C
-#define INTPIN4		0x0A50
-#define INTPIN5		0x0A54
-#define INTPIN6		0x0A58
-#define INTPIN7		0x0A5C
-
-
-
-
-/* TITAN register offsets */
-#define CPRR		0x0004
-#define CPDSR		0x0008
-#define CPTC0R		0x000c
-#define CPTC1R		0x0010
-#define CPCFG0		0x0020
-#define CPCFG1		0x0024
-#define CPDST0A		0x0028
-#define CPDST0B		0x002c
-#define CPDST1A		0x0030
-#define CPDST1B		0x0034
-#define CPXDSTA		0x0038
-#define CPXDSTB		0x003c
-#define CPXCISRA	0x0048
-#define CPXCISRB	0x004c
-#define CPGIG0ER	0x0050
-#define CPGIG1ER	0x0054
-#define CPGRWL		0x0068
-#define CPURSLMT	0x00f8
-#define UACFG		0x0200
-#define UAINTS		0x0204
-#define SDRXFCIE	0x4828
-#define SDTXFCIE	0x4928
-#define INTP0Status0	0x1B00
-#define INTP0Mask0	0x1B04
-#define INTP0Set0	0x1B08
-#define INTP0Clear0	0x1B0C
-#define GXCFG		0x5000
-#define GXDMADRPFX	0x5018
-#define GXDMA_DESCADR	0x501c
-#define GXCH0TDESSTRT	0x5054
-
-/* IRQ definitions */
-#define NMICONFIG		0xac0
-#define TITAN_MSGINT	0xc4
-#define TITAN_IRQ	((TITAN_MSGINT / 0x20) + 2)
-#define FPGA0_MSGINT	0x5a
-#define FPGA0_IRQ	((FPGA0_MSGINT / 0x20) + 2)
-#define FPGA1_MSGINT	0x7b
-#define FPGA1_IRQ	((FPGA1_MSGINT / 0x20) + 2)
-#define PHY_MSGINT	0x9c
-#define PHY_IRQ		((PHY_MSGINT   / 0x20) + 2)
-
-#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE)
-/* Pre-release units used interrupt pin #9 */
-#define USB_IRQ		11
-#else
-/* Re-designed units use interrupt pin #1 */
-#define USB_MSGINT	0x39
-#define USB_IRQ		((USB_MSGINT / 0x20) + 2)
-#endif
-#define TIMER_IRQ	12
-
-
-/* Device address ranges */
-#define EXCITE_OFFS_OCD		0x1fffc000
-#define	EXCITE_SIZE_OCD		(16 * 1024)
-#define EXCITE_PHYS_OCD		CPHYSADDR(EXCITE_OFFS_OCD)
-#define EXCITE_ADDR_OCD		CKSEG1ADDR(EXCITE_OFFS_OCD)
-
-#define EXCITE_OFFS_SCRAM 	0x1fffa000
-#define	EXCITE_SIZE_SCRAM	(8 << 10)
-#define EXCITE_PHYS_SCRAM 	CPHYSADDR(EXCITE_OFFS_SCRAM)
-#define EXCITE_ADDR_SCRAM 	CKSEG1ADDR(EXCITE_OFFS_SCRAM)
-
-#define EXCITE_OFFS_PCI_IO	0x1fff8000
-#define	EXCITE_SIZE_PCI_IO	(8 << 10)
-#define EXCITE_PHYS_PCI_IO	CPHYSADDR(EXCITE_OFFS_PCI_IO)
-#define EXCITE_ADDR_PCI_IO 	CKSEG1ADDR(EXCITE_OFFS_PCI_IO)
-
-#define EXCITE_OFFS_TITAN	0x1fff0000
-#define EXCITE_SIZE_TITAN	(32 << 10)
-#define EXCITE_PHYS_TITAN	CPHYSADDR(EXCITE_OFFS_TITAN)
-#define EXCITE_ADDR_TITAN	CKSEG1ADDR(EXCITE_OFFS_TITAN)
-
-#define EXCITE_OFFS_PCI_MEM	0x1ffe0000
-#define EXCITE_SIZE_PCI_MEM	(64 << 10)
-#define EXCITE_PHYS_PCI_MEM	CPHYSADDR(EXCITE_OFFS_PCI_MEM)
-#define EXCITE_ADDR_PCI_MEM	CKSEG1ADDR(EXCITE_OFFS_PCI_MEM)
-
-#define EXCITE_OFFS_FPGA	0x1ffdc000
-#define EXCITE_SIZE_FPGA	(16 << 10)
-#define EXCITE_PHYS_FPGA	CPHYSADDR(EXCITE_OFFS_FPGA)
-#define EXCITE_ADDR_FPGA	CKSEG1ADDR(EXCITE_OFFS_FPGA)
-
-#define EXCITE_OFFS_NAND	0x1ffd8000
-#define EXCITE_SIZE_NAND	(16 << 10)
-#define EXCITE_PHYS_NAND	CPHYSADDR(EXCITE_OFFS_NAND)
-#define EXCITE_ADDR_NAND	CKSEG1ADDR(EXCITE_OFFS_NAND)
-
-#define EXCITE_OFFS_BOOTROM	0x1f000000
-#define EXCITE_SIZE_BOOTROM	(8 << 20)
-#define EXCITE_PHYS_BOOTROM	CPHYSADDR(EXCITE_OFFS_BOOTROM)
-#define EXCITE_ADDR_BOOTROM	CKSEG1ADDR(EXCITE_OFFS_BOOTROM)
-
-/* FPGA address offsets */
-#define EXCITE_FPGA_DPR		0x0104	/* dual-ported ram */
-#define EXCITE_FPGA_SYSCTL	0x0200	/* system control register block */
-
-#endif /* __EXCITE_H__ */

arch/mips/include/asm/mach-excite/excite_fpga.h

@@ -1,80 +0,0 @@
-#ifndef EXCITE_FPGA_H_INCLUDED
-#define EXCITE_FPGA_H_INCLUDED
-
-
-/**
- * Address alignment of the individual FPGA bytes.
- * The address arrangement of the individual bytes of the FPGA is two
- * byte aligned at the embedded MK2 platform.
- */
-#ifdef EXCITE_CCI_FPGA_MK2
-typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
-#else
-typedef unsigned char excite_cci_fpga_align_t;
-#endif
-
-
-/**
- * Size of Dual Ported RAM.
- */
-#define EXCITE_DPR_SIZE 263
-
-
-/**
- * Size of Reserved Status Fields in Dual Ported RAM.
- */
-#define EXCITE_DPR_STATUS_SIZE 7
-
-
-
-/**
- * FPGA.
- * Hardware register layout of the FPGA interface. The FPGA must accessed
- * byte wise solely.
- * @see EXCITE_CCI_DPR_MK2
- */
-typedef struct excite_fpga {
-
-	/**
-	 * Dual Ported RAM.
-	 */
-	excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
-
-	/**
-	 * Status.
-	 */
-	excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
-
-#ifdef EXCITE_CCI_FPGA_MK2
-	/**
-	 * RM9000 Interrupt.
-	 * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
-	 */
-	excite_cci_fpga_align_t rm9k_int;
-#else
-	/**
-	 * MK2 Interrupt.
-	 * Write access initiates interrupt at the ARM processor of the MK2.
-	 */
-	excite_cci_fpga_align_t mk2_int;
-
-	excite_cci_fpga_align_t gap[0x1000-0x10f];
-
-	/**
-	 * IRQ Source/Acknowledge.
-	 */
-	excite_cci_fpga_align_t rm9k_irq_src;
-
-	/**
-	 * IRQ Mask.
-	 * Set bits enable the related interrupt.
-	 */
-	excite_cci_fpga_align_t rm9k_irq_mask;
-#endif
-
-
-} excite_fpga;
-
-
-
-#endif	/* ndef EXCITE_FPGA_H_INCLUDED */

arch/mips/include/asm/mach-excite/excite_nandflash.h

@@ -1,7 +0,0 @@
-#ifndef __EXCITE_NANDFLASH_H__
-#define __EXCITE_NANDFLASH_H__
-
-/* Resource names */
-#define EXCITE_NANDFLASH_RESOURCE_REGS	"excite_nandflash_regs"
-
-#endif /* __EXCITE_NANDFLASH_H__ */

arch/mips/include/asm/mach-excite/rm9k_eth.h

@@ -1,23 +0,0 @@
-#if !defined(__RM9K_ETH_H__)
-#define __RM9K_ETH_H__
-
-#define RM9K_GE_NAME			"rm9k_ge"
-
-/* Resource names */
-#define RM9K_GE_RESOURCE_MAC      	"rm9k_ge_mac"
-#define RM9K_GE_RESOURCE_MSTAT      	"rm9k_ge_mstat"
-#define RM9K_GE_RESOURCE_PKTPROC	"rm9k_ge_pktproc"
-#define RM9K_GE_RESOURCE_XDMA		"rm9k_ge_xdma"
-#define RM9K_GE_RESOURCE_FIFO_RX  	"rm9k_ge_fifo_rx"
-#define RM9K_GE_RESOURCE_FIFO_TX  	"rm9k_ge_fifo_tx"
-#define RM9K_GE_RESOURCE_FIFOMEM_RX  	"rm9k_ge_fifo_memory_rx"
-#define RM9K_GE_RESOURCE_FIFOMEM_TX  	"rm9k_ge_fifo_memory_tx"
-#define RM9K_GE_RESOURCE_PHY      	"rm9k_ge_phy"
-#define RM9K_GE_RESOURCE_DMADESC_RX  	"rm9k_ge_dmadesc_rx"
-#define RM9K_GE_RESOURCE_DMADESC_TX  	"rm9k_ge_dmadesc_tx"
-#define RM9K_GE_RESOURCE_IRQ_MAIN	"rm9k_ge_irq_main"
-#define RM9K_GE_RESOURCE_IRQ_PHY	"rm9k_ge_irq_phy"
-#define RM9K_GE_RESOURCE_GPI_SLICE	"rm9k_ge_gpi_slice"
-#define RM9K_GE_RESOURCE_MDIO_CHANNEL	"rm9k_ge_mdio_channel"
-
-#endif /* !defined(__RM9K_ETH_H__) */

arch/mips/include/asm/mach-excite/rm9k_wdt.h

@@ -1,12 +0,0 @@
-#ifndef __RM9K_WDT_H__
-#define __RM9K_WDT_H__
-
-/* Device name */
-#define WDT_NAME		"wdt_gpi"
-
-/* Resource names */
-#define WDT_RESOURCE_REGS	"excite_watchdog_regs"
-#define WDT_RESOURCE_IRQ	"excite_watchdog_irq"
-#define WDT_RESOURCE_COUNTER	"excite_watchdog_counter"
-
-#endif /* __RM9K_WDT_H__ */

arch/mips/include/asm/mach-excite/rm9k_xicap.h

@@ -1,16 +0,0 @@
-#ifndef __EXCITE_XICAP_H__
-#define __EXCITE_XICAP_H__
-
-
-/* Resource names */
-#define XICAP_RESOURCE_FIFO_RX		"xicap_fifo_rx"
-#define XICAP_RESOURCE_FIFO_TX		"xicap_fifo_tx"
-#define XICAP_RESOURCE_XDMA 		"xicap_xdma"
-#define XICAP_RESOURCE_DMADESC		"xicap_dmadesc"
-#define XICAP_RESOURCE_PKTPROC  	"xicap_pktproc"
-#define XICAP_RESOURCE_IRQ		"xicap_irq"
-#define XICAP_RESOURCE_GPI_SLICE	"xicap_gpi_slice"
-#define XICAP_RESOURCE_FIFO_BLK		"xicap_fifo_blocks"
-#define XICAP_RESOURCE_PKT_STREAM	"xicap_pkt_stream"
-
-#endif /* __EXCITE_XICAP_H__ */

arch/mips/include/asm/mach-loongson/cs5536/cs5536.h

@@ -0,0 +1,305 @@
+/*
+ * The header file of cs5536 sourth bridge.
+ *
+ * Copyright (C) 2007 Lemote, Inc.
+ * Author : jlliu <liujl@lemote.com>
+ */
+
+#ifndef	_CS5536_H
+#define	_CS5536_H
+
+#include <linux/types.h>
+
+extern void _rdmsr(u32 msr, u32 *hi, u32 *lo);
+extern void _wrmsr(u32 msr, u32 hi, u32 lo);
+
+/*
+ * MSR module base
+ */
+#define	CS5536_SB_MSR_BASE	(0x00000000)
+#define	CS5536_GLIU_MSR_BASE	(0x10000000)
+#define	CS5536_ILLEGAL_MSR_BASE	(0x20000000)
+#define	CS5536_USB_MSR_BASE	(0x40000000)
+#define	CS5536_IDE_MSR_BASE	(0x60000000)
+#define	CS5536_DIVIL_MSR_BASE	(0x80000000)
+#define	CS5536_ACC_MSR_BASE	(0xa0000000)
+#define	CS5536_UNUSED_MSR_BASE	(0xc0000000)
+#define	CS5536_GLCP_MSR_BASE	(0xe0000000)
+
+#define	SB_MSR_REG(offset)	(CS5536_SB_MSR_BASE	| (offset))
+#define	GLIU_MSR_REG(offset)	(CS5536_GLIU_MSR_BASE	| (offset))
+#define	ILLEGAL_MSR_REG(offset)	(CS5536_ILLEGAL_MSR_BASE | (offset))
+#define	USB_MSR_REG(offset)	(CS5536_USB_MSR_BASE	| (offset))
+#define	IDE_MSR_REG(offset)	(CS5536_IDE_MSR_BASE	| (offset))
+#define	DIVIL_MSR_REG(offset)	(CS5536_DIVIL_MSR_BASE	| (offset))
+#define	ACC_MSR_REG(offset)	(CS5536_ACC_MSR_BASE	| (offset))
+#define	UNUSED_MSR_REG(offset)	(CS5536_UNUSED_MSR_BASE	| (offset))
+#define	GLCP_MSR_REG(offset)	(CS5536_GLCP_MSR_BASE	| (offset))
+
+/*
+ * BAR SPACE OF VIRTUAL PCI :
+ * range for pci probe use, length is the actual size.
+ */
+/* IO space for all DIVIL modules */
+#define	CS5536_IRQ_RANGE	0xffffffe0 /* USERD FOR PCI PROBE */
+#define	CS5536_IRQ_LENGTH	0x20	/* THE REGS ACTUAL LENGTH */
+#define	CS5536_SMB_RANGE	0xfffffff8
+#define	CS5536_SMB_LENGTH	0x08
+#define	CS5536_GPIO_RANGE	0xffffff00
+#define	CS5536_GPIO_LENGTH	0x100
+#define	CS5536_MFGPT_RANGE	0xffffffc0
+#define	CS5536_MFGPT_LENGTH	0x40
+#define	CS5536_ACPI_RANGE	0xffffffe0
+#define	CS5536_ACPI_LENGTH	0x20
+#define	CS5536_PMS_RANGE	0xffffff80
+#define	CS5536_PMS_LENGTH	0x80
+/* IO space for IDE */
+#define	CS5536_IDE_RANGE	0xfffffff0
+#define	CS5536_IDE_LENGTH	0x10
+/* IO space for ACC */
+#define	CS5536_ACC_RANGE	0xffffff80
+#define	CS5536_ACC_LENGTH	0x80
+/* MEM space for ALL USB modules */
+#define	CS5536_OHCI_RANGE	0xfffff000
+#define	CS5536_OHCI_LENGTH	0x1000
+#define	CS5536_EHCI_RANGE	0xfffff000
+#define	CS5536_EHCI_LENGTH	0x1000
+
+/*
+ * PCI MSR ACCESS
+ */
+#define	PCI_MSR_CTRL		0xF0
+#define	PCI_MSR_ADDR		0xF4
+#define	PCI_MSR_DATA_LO		0xF8
+#define	PCI_MSR_DATA_HI		0xFC
+
+/**************** MSR *****************************/
+
+/*
+ * GLIU STANDARD MSR
+ */
+#define	GLIU_CAP		0x00
+#define	GLIU_CONFIG		0x01
+#define	GLIU_SMI		0x02
+#define	GLIU_ERROR		0x03
+#define	GLIU_PM			0x04
+#define	GLIU_DIAG		0x05
+
+/*
+ * GLIU SPEC. MSR
+ */
+#define	GLIU_P2D_BM0		0x20
+#define	GLIU_P2D_BM1		0x21
+#define	GLIU_P2D_BM2		0x22
+#define	GLIU_P2D_BMK0		0x23
+#define	GLIU_P2D_BMK1		0x24
+#define	GLIU_P2D_BM3		0x25
+#define	GLIU_P2D_BM4		0x26
+#define	GLIU_COH		0x80
+#define	GLIU_PAE		0x81
+#define	GLIU_ARB		0x82
+#define	GLIU_ASMI		0x83
+#define	GLIU_AERR		0x84
+#define	GLIU_DEBUG		0x85
+#define	GLIU_PHY_CAP		0x86
+#define	GLIU_NOUT_RESP		0x87
+#define	GLIU_NOUT_WDATA		0x88
+#define	GLIU_WHOAMI		0x8B
+#define	GLIU_SLV_DIS		0x8C
+#define	GLIU_IOD_BM0		0xE0
+#define	GLIU_IOD_BM1		0xE1
+#define	GLIU_IOD_BM2		0xE2
+#define	GLIU_IOD_BM3		0xE3
+#define	GLIU_IOD_BM4		0xE4
+#define	GLIU_IOD_BM5		0xE5
+#define	GLIU_IOD_BM6		0xE6
+#define	GLIU_IOD_BM7		0xE7
+#define	GLIU_IOD_BM8		0xE8
+#define	GLIU_IOD_BM9		0xE9
+#define	GLIU_IOD_SC0		0xEA
+#define	GLIU_IOD_SC1		0xEB
+#define	GLIU_IOD_SC2		0xEC
+#define	GLIU_IOD_SC3		0xED
+#define	GLIU_IOD_SC4		0xEE
+#define	GLIU_IOD_SC5		0xEF
+#define	GLIU_IOD_SC6		0xF0
+#define	GLIU_IOD_SC7		0xF1
+
+/*
+ * SB STANDARD
+ */
+#define	SB_CAP		0x00
+#define	SB_CONFIG	0x01
+#define	SB_SMI		0x02
+#define	SB_ERROR	0x03
+#define	SB_MAR_ERR_EN		0x00000001
+#define	SB_TAR_ERR_EN		0x00000002
+#define	SB_RSVD_BIT1		0x00000004
+#define	SB_EXCEP_ERR_EN		0x00000008
+#define	SB_SYSE_ERR_EN		0x00000010
+#define	SB_PARE_ERR_EN		0x00000020
+#define	SB_TAS_ERR_EN		0x00000040
+#define	SB_MAR_ERR_FLAG		0x00010000
+#define	SB_TAR_ERR_FLAG		0x00020000
+#define	SB_RSVD_BIT2		0x00040000
+#define	SB_EXCEP_ERR_FLAG	0x00080000
+#define	SB_SYSE_ERR_FLAG	0x00100000
+#define	SB_PARE_ERR_FLAG	0x00200000
+#define	SB_TAS_ERR_FLAG		0x00400000
+#define	SB_PM		0x04
+#define	SB_DIAG		0x05
+
+/*
+ * SB SPEC.
+ */
+#define	SB_CTRL		0x10
+#define	SB_R0		0x20
+#define	SB_R1		0x21
+#define	SB_R2		0x22
+#define	SB_R3		0x23
+#define	SB_R4		0x24
+#define	SB_R5		0x25
+#define	SB_R6		0x26
+#define	SB_R7		0x27
+#define	SB_R8		0x28
+#define	SB_R9		0x29
+#define	SB_R10		0x2A
+#define	SB_R11		0x2B
+#define	SB_R12		0x2C
+#define	SB_R13		0x2D
+#define	SB_R14		0x2E
+#define	SB_R15		0x2F
+
+/*
+ * GLCP STANDARD
+ */
+#define	GLCP_CAP		0x00
+#define	GLCP_CONFIG		0x01
+#define	GLCP_SMI		0x02
+#define	GLCP_ERROR		0x03
+#define	GLCP_PM			0x04
+#define	GLCP_DIAG		0x05
+
+/*
+ * GLCP SPEC.
+ */
+#define	GLCP_CLK_DIS_DELAY	0x08
+#define	GLCP_PM_CLK_DISABLE	0x09
+#define	GLCP_GLB_PM		0x0B
+#define	GLCP_DBG_OUT		0x0C
+#define	GLCP_RSVD1		0x0D
+#define	GLCP_SOFT_COM		0x0E
+#define	SOFT_BAR_SMB_FLAG	0x00000001
+#define	SOFT_BAR_GPIO_FLAG	0x00000002
+#define	SOFT_BAR_MFGPT_FLAG	0x00000004
+#define	SOFT_BAR_IRQ_FLAG	0x00000008
+#define	SOFT_BAR_PMS_FLAG	0x00000010
+#define	SOFT_BAR_ACPI_FLAG	0x00000020
+#define	SOFT_BAR_IDE_FLAG	0x00000400
+#define	SOFT_BAR_ACC_FLAG	0x00000800
+#define	SOFT_BAR_OHCI_FLAG	0x00001000
+#define	SOFT_BAR_EHCI_FLAG	0x00002000
+#define	GLCP_RSVD2		0x0F
+#define	GLCP_CLK_OFF		0x10
+#define	GLCP_CLK_ACTIVE		0x11
+#define	GLCP_CLK_DISABLE	0x12
+#define	GLCP_CLK4ACK		0x13
+#define	GLCP_SYS_RST		0x14
+#define	GLCP_RSVD3		0x15
+#define	GLCP_DBG_CLK_CTRL	0x16
+#define	GLCP_CHIP_REV_ID	0x17
+
+/* PIC */
+#define	PIC_YSEL_LOW		0x20
+#define	PIC_YSEL_LOW_USB_SHIFT		8
+#define	PIC_YSEL_LOW_ACC_SHIFT		16
+#define	PIC_YSEL_LOW_FLASH_SHIFT	24
+#define	PIC_YSEL_HIGH		0x21
+#define	PIC_ZSEL_LOW		0x22
+#define	PIC_ZSEL_HIGH		0x23
+#define	PIC_IRQM_PRIM		0x24
+#define	PIC_IRQM_LPC		0x25
+#define	PIC_XIRR_STS_LOW	0x26
+#define	PIC_XIRR_STS_HIGH	0x27
+#define	PCI_SHDW		0x34
+
+/*
+ * DIVIL STANDARD
+ */
+#define	DIVIL_CAP		0x00
+#define	DIVIL_CONFIG		0x01
+#define	DIVIL_SMI		0x02
+#define	DIVIL_ERROR		0x03
+#define	DIVIL_PM		0x04
+#define	DIVIL_DIAG		0x05
+
+/*
+ * DIVIL SPEC.
+ */
+#define	DIVIL_LBAR_IRQ		0x08
+#define	DIVIL_LBAR_KEL		0x09
+#define	DIVIL_LBAR_SMB		0x0B
+#define	DIVIL_LBAR_GPIO		0x0C
+#define	DIVIL_LBAR_MFGPT	0x0D
+#define	DIVIL_LBAR_ACPI		0x0E
+#define	DIVIL_LBAR_PMS		0x0F
+#define	DIVIL_LEG_IO		0x14
+#define	DIVIL_BALL_OPTS		0x15
+#define	DIVIL_SOFT_IRQ		0x16
+#define	DIVIL_SOFT_RESET	0x17
+
+/* MFGPT */
+#define MFGPT_IRQ	0x28
+
+/*
+ * IDE STANDARD
+ */
+#define	IDE_CAP		0x00
+#define	IDE_CONFIG	0x01
+#define	IDE_SMI		0x02
+#define	IDE_ERROR	0x03
+#define	IDE_PM		0x04
+#define	IDE_DIAG	0x05
+
+/*
+ * IDE SPEC.
+ */
+#define	IDE_IO_BAR	0x08
+#define	IDE_CFG		0x10
+#define	IDE_DTC		0x12
+#define	IDE_CAST	0x13
+#define	IDE_ETC		0x14
+#define	IDE_INTERNAL_PM	0x15
+
+/*
+ * ACC STANDARD
+ */
+#define	ACC_CAP		0x00
+#define	ACC_CONFIG	0x01
+#define	ACC_SMI		0x02
+#define	ACC_ERROR	0x03
+#define	ACC_PM		0x04
+#define	ACC_DIAG	0x05
+
+/*
+ * USB STANDARD
+ */
+#define	USB_CAP		0x00
+#define	USB_CONFIG	0x01
+#define	USB_SMI		0x02
+#define	USB_ERROR	0x03
+#define	USB_PM		0x04
+#define	USB_DIAG	0x05
+
+/*
+ * USB SPEC.
+ */
+#define	USB_OHCI	0x08
+#define	USB_EHCI	0x09
+
+/****************** NATIVE ***************************/
+/* GPIO : I/O SPACE; REG : 32BITS */
+#define	GPIOL_OUT_VAL		0x00
+#define	GPIOL_OUT_EN		0x04
+
+#endif				/* _CS5536_H */

arch/mips/include/asm/mach-loongson/cs5536/cs5536_mfgpt.h

@@ -0,0 +1,35 @@
+/*
+ * cs5536 mfgpt header file
+ */
+
+#ifndef _CS5536_MFGPT_H
+#define _CS5536_MFGPT_H
+
+#include <cs5536/cs5536.h>
+#include <cs5536/cs5536_pci.h>
+
+#ifdef CONFIG_CS5536_MFGPT
+extern void setup_mfgpt0_timer(void);
+extern void disable_mfgpt0_counter(void);
+extern void enable_mfgpt0_counter(void);
+#else
+static inline void __maybe_unused setup_mfgpt0_timer(void)
+{
+}
+static inline void __maybe_unused disable_mfgpt0_counter(void)
+{
+}
+static inline void __maybe_unused enable_mfgpt0_counter(void)
+{
+}
+#endif
+
+#define MFGPT_TICK_RATE 14318000
+#define COMPARE  ((MFGPT_TICK_RATE + HZ/2) / HZ)
+
+#define MFGPT_BASE	mfgpt_base
+#define MFGPT0_CMP2	(MFGPT_BASE + 2)
+#define MFGPT0_CNT	(MFGPT_BASE + 4)
+#define MFGPT0_SETUP	(MFGPT_BASE + 6)
+
+#endif /*!_CS5536_MFGPT_H */

arch/mips/include/asm/mach-loongson/cs5536/cs5536_pci.h

@@ -0,0 +1,153 @@
+/*
+ * the definition file of cs5536 Virtual Support Module(VSM).
+ * pci configuration space can be accessed through the VSM, so
+ * there is no need of the MSR read/write now, except the spec.
+ * MSR registers which are not implemented yet.
+ *
+ * Copyright (C) 2007 Lemote Inc.
+ * Author : jlliu, liujl@lemote.com
+ */
+
+#ifndef	_CS5536_PCI_H
+#define	_CS5536_PCI_H
+
+#include <linux/types.h>
+#include <linux/pci_regs.h>
+
+extern void cs5536_pci_conf_write4(int function, int reg, u32 value);
+extern u32 cs5536_pci_conf_read4(int function, int reg);
+
+#define	CS5536_ACC_INTR		9
+#define	CS5536_IDE_INTR		14
+#define	CS5536_USB_INTR		11
+#define	CS5536_MFGPT_INTR	5
+#define	CS5536_UART1_INTR	4
+#define	CS5536_UART2_INTR	3
+
+/************** PCI BUS DEVICE FUNCTION ***************/
+
+/*
+ * PCI bus device function
+ */
+#define	PCI_BUS_CS5536		0
+#define	PCI_IDSEL_CS5536	14
+
+/********** STANDARD PCI-2.2 EXPANSION ****************/
+
+/*
+ * PCI configuration space
+ * we have to virtualize the PCI configure space head, so we should
+ * define the necessary IDs and some others.
+ */
+
+/* CONFIG of PCI VENDOR ID*/
+#define CFG_PCI_VENDOR_ID(mod_dev_id, sys_vendor_id) \
+	(((mod_dev_id) << 16) | (sys_vendor_id))
+
+/* VENDOR ID */
+#define	CS5536_VENDOR_ID	0x1022
+
+/* DEVICE ID */
+#define	CS5536_ISA_DEVICE_ID		0x2090
+#define	CS5536_IDE_DEVICE_ID		0x209a
+#define	CS5536_ACC_DEVICE_ID		0x2093
+#define	CS5536_OHCI_DEVICE_ID		0x2094
+#define	CS5536_EHCI_DEVICE_ID		0x2095
+
+/* CLASS CODE : CLASS SUB-CLASS INTERFACE */
+#define	CS5536_ISA_CLASS_CODE		0x060100
+#define CS5536_IDE_CLASS_CODE		0x010180
+#define	CS5536_ACC_CLASS_CODE		0x040100
+#define	CS5536_OHCI_CLASS_CODE		0x0C0310
+#define	CS5536_EHCI_CLASS_CODE		0x0C0320
+
+/* BHLC : BIST HEADER-TYPE LATENCY-TIMER CACHE-LINE-SIZE */
+
+#define CFG_PCI_CACHE_LINE_SIZE(header_type, latency_timer)	\
+	((PCI_NONE_BIST << 24) | ((header_type) << 16) \
+		| ((latency_timer) << 8) | PCI_NORMAL_CACHE_LINE_SIZE);
+
+#define	PCI_NONE_BIST			0x00	/* RO not implemented yet. */
+#define	PCI_BRIDGE_HEADER_TYPE		0x80	/* RO */
+#define	PCI_NORMAL_HEADER_TYPE		0x00
+#define	PCI_NORMAL_LATENCY_TIMER	0x00
+#define	PCI_NORMAL_CACHE_LINE_SIZE	0x08	/* RW */
+
+/* BAR */
+#define	PCI_BAR0_REG			0x10
+#define	PCI_BAR1_REG			0x14
+#define	PCI_BAR2_REG			0x18
+#define	PCI_BAR3_REG			0x1c
+#define	PCI_BAR4_REG			0x20
+#define	PCI_BAR5_REG			0x24
+#define	PCI_BAR_COUNT			6
+#define	PCI_BAR_RANGE_MASK		0xFFFFFFFF
+
+/* CARDBUS CIS POINTER */
+#define	PCI_CARDBUS_CIS_POINTER		0x00000000
+
+/* SUBSYSTEM VENDOR ID  */
+#define	CS5536_SUB_VENDOR_ID		CS5536_VENDOR_ID
+
+/* SUBSYSTEM ID */
+#define	CS5536_ISA_SUB_ID		CS5536_ISA_DEVICE_ID
+#define	CS5536_IDE_SUB_ID		CS5536_IDE_DEVICE_ID
+#define	CS5536_ACC_SUB_ID		CS5536_ACC_DEVICE_ID
+#define	CS5536_OHCI_SUB_ID		CS5536_OHCI_DEVICE_ID
+#define	CS5536_EHCI_SUB_ID		CS5536_EHCI_DEVICE_ID
+
+/* EXPANSION ROM BAR */
+#define	PCI_EXPANSION_ROM_BAR		0x00000000
+
+/* CAPABILITIES POINTER */
+#define	PCI_CAPLIST_POINTER		0x00000000
+#define PCI_CAPLIST_USB_POINTER		0x40
+/* INTERRUPT */
+
+#define CFG_PCI_INTERRUPT_LINE(pin, mod_intr) \
+	((PCI_MAX_LATENCY << 24) | (PCI_MIN_GRANT << 16) | \
+		((pin) << 8) | (mod_intr))
+
+#define	PCI_MAX_LATENCY			0x40
+#define	PCI_MIN_GRANT			0x00
+#define	PCI_DEFAULT_PIN			0x01
+
+/*********** EXPANSION PCI REG ************************/
+
+/*
+ * ISA EXPANSION
+ */
+#define	PCI_UART1_INT_REG 	0x50
+#define PCI_UART2_INT_REG	0x54
+#define	PCI_ISA_FIXUP_REG	0x58
+
+/*
+ * IDE EXPANSION
+ */
+#define	PCI_IDE_CFG_REG		0x40
+#define	CS5536_IDE_FLASH_SIGNATURE	0xDEADBEEF
+#define	PCI_IDE_DTC_REG		0x48
+#define	PCI_IDE_CAST_REG	0x4C
+#define	PCI_IDE_ETC_REG		0x50
+#define	PCI_IDE_PM_REG		0x54
+#define	PCI_IDE_INT_REG		0x60
+
+/*
+ * ACC EXPANSION
+ */
+#define	PCI_ACC_INT_REG		0x50
+
+/*
+ * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI
+ */
+#define	PCI_OHCI_PM_REG		0x40
+#define	PCI_OHCI_INT_REG	0x50
+
+/*
+ * EHCI EXPANSION
+ */
+#define	PCI_EHCI_LEGSMIEN_REG	0x50
+#define	PCI_EHCI_LEGSMISTS_REG	0x54
+#define	PCI_EHCI_FLADJ_REG	0x60
+
+#endif				/* _CS5536_PCI_H_ */

arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h

@@ -0,0 +1,31 @@
+/*
+ * the read/write interfaces for Virtual Support Module(VSM)
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
+#ifndef	_CS5536_VSM_H
+#define	_CS5536_VSM_H
+
+#include <linux/types.h>
+
+typedef void (*cs5536_pci_vsm_write)(int reg, u32 value);
+typedef u32 (*cs5536_pci_vsm_read)(int reg);
+
+#define DECLARE_CS5536_MODULE(name) \
+extern void pci_##name##_write_reg(int reg, u32 value); \
+extern u32 pci_##name##_read_reg(int reg);
+
+/* ide module */
+DECLARE_CS5536_MODULE(ide)
+/* acc module */
+DECLARE_CS5536_MODULE(acc)
+/* ohci module */
+DECLARE_CS5536_MODULE(ohci)
+/* isa module */
+DECLARE_CS5536_MODULE(isa)
+/* ehci module */
+DECLARE_CS5536_MODULE(ehci)
+
+#endif				/* _CS5536_VSM_H */

arch/mips/include/asm/mach-loongson/dma-coherence.h

@@ -28,7 +28,11 @@ static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
 static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
 	dma_addr_t dma_addr)
 {
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
+#else
 	return dma_addr & 0x7fffffff;
+#endif
 }
 
 static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,

arch/mips/include/asm/mach-loongson/loongson.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzj@lemote.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -15,9 +15,6 @@
 #include <linux/io.h>
 #include <linux/init.h>
 
-/* there is an internal bonito64-compatiable northbridge in loongson2e/2f */
-#include <asm/mips-boards/bonito64.h>
-
 /* loongson internal northbridge initialization */
 extern void bonito_irq_init(void);
 
@@ -32,7 +29,19 @@ extern unsigned long memsize, highmemsize;
 /* loongson-specific command line, env and memory initialization */
 extern void __init prom_init_memory(void);
 extern void __init prom_init_cmdline(void);
+extern void __init prom_init_machtype(void);
 extern void __init prom_init_env(void);
+#ifdef CONFIG_LOONGSON_UART_BASE
+extern unsigned long _loongson_uart_base, loongson_uart_base;
+extern void prom_init_loongson_uart_base(void);
+#endif
+
+static inline void prom_init_uart_base(void)
+{
+#ifdef CONFIG_LOONGSON_UART_BASE
+	prom_init_loongson_uart_base();
+#endif
+}
 
 /* irq operation functions */
 extern void bonito_irqdispatch(void);
@@ -40,25 +49,276 @@ extern void __init bonito_irq_init(void);
 extern void __init set_irq_trigger_mode(void);
 extern void __init mach_init_irq(void);
 extern void mach_irq_dispatch(unsigned int pending);
+extern int mach_i8259_irq(void);
+
+/* We need this in some places... */
+#define delay()	({		\
+	int x;				\
+	for (x = 0; x < 100000; x++)	\
+		__asm__ __volatile__(""); \
+})
+
+#define LOONGSON_REG(x) \
+	(*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
+
+#define LOONGSON_IRQ_BASE	32
+#define LOONGSON2_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
+
+#define LOONGSON_FLASH_BASE	0x1c000000
+#define LOONGSON_FLASH_SIZE	0x02000000	/* 32M */
+#define LOONGSON_FLASH_TOP	(LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1)
+
+#define LOONGSON_LIO0_BASE	0x1e000000
+#define LOONGSON_LIO0_SIZE	0x01C00000	/* 28M */
+#define LOONGSON_LIO0_TOP	(LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1)
+
+#define LOONGSON_BOOT_BASE	0x1fc00000
+#define LOONGSON_BOOT_SIZE	0x00100000	/* 1M */
+#define LOONGSON_BOOT_TOP 	(LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1)
+#define LOONGSON_REG_BASE 	0x1fe00000
+#define LOONGSON_REG_SIZE 	0x00100000	/* 256Bytes + 256Bytes + ??? */
+#define LOONGSON_REG_TOP	(LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
+
+#define LOONGSON_LIO1_BASE 	0x1ff00000
+#define LOONGSON_LIO1_SIZE 	0x00100000	/* 1M */
+#define LOONGSON_LIO1_TOP	(LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1)
+
+#define LOONGSON_PCILO0_BASE	0x10000000
+#define LOONGSON_PCILO1_BASE	0x14000000
+#define LOONGSON_PCILO2_BASE	0x18000000
+#define LOONGSON_PCILO_BASE	LOONGSON_PCILO0_BASE
+#define LOONGSON_PCILO_SIZE	0x0c000000	/* 64M * 3 */
+#define LOONGSON_PCILO_TOP	(LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1)
+
+#define LOONGSON_PCICFG_BASE	0x1fe80000
+#define LOONGSON_PCICFG_SIZE	0x00000800	/* 2K */
+#define LOONGSON_PCICFG_TOP	(LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
+#define LOONGSON_PCIIO_BASE	0x1fd00000
+#define LOONGSON_PCIIO_SIZE	0x00100000	/* 1M */
+#define LOONGSON_PCIIO_TOP	(LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1)
+
+/* Loongson Register Bases */
+
+#define LOONGSON_PCICONFIGBASE	0x00
+#define LOONGSON_REGBASE	0x100
 
 /* PCI Configuration Registers */
-#define LOONGSON_PCI_ISR4C  BONITO_PCI_REG(0x4c)
+
+#define LOONGSON_PCI_REG(x)	LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x))
+#define LOONGSON_PCIDID		LOONGSON_PCI_REG(0x00)
+#define LOONGSON_PCICMD		LOONGSON_PCI_REG(0x04)
+#define LOONGSON_PCICLASS 	LOONGSON_PCI_REG(0x08)
+#define LOONGSON_PCILTIMER	LOONGSON_PCI_REG(0x0c)
+#define LOONGSON_PCIBASE0 	LOONGSON_PCI_REG(0x10)
+#define LOONGSON_PCIBASE1 	LOONGSON_PCI_REG(0x14)
+#define LOONGSON_PCIBASE2 	LOONGSON_PCI_REG(0x18)
+#define LOONGSON_PCIBASE3 	LOONGSON_PCI_REG(0x1c)
+#define LOONGSON_PCIBASE4 	LOONGSON_PCI_REG(0x20)
+#define LOONGSON_PCIEXPRBASE	LOONGSON_PCI_REG(0x30)
+#define LOONGSON_PCIINT		LOONGSON_PCI_REG(0x3c)
+
+#define LOONGSON_PCI_ISR4C	LOONGSON_PCI_REG(0x4c)
+
+#define LOONGSON_PCICMD_PERR_CLR	0x80000000
+#define LOONGSON_PCICMD_SERR_CLR	0x40000000
+#define LOONGSON_PCICMD_MABORT_CLR	0x20000000
+#define LOONGSON_PCICMD_MTABORT_CLR	0x10000000
+#define LOONGSON_PCICMD_TABORT_CLR	0x08000000
+#define LOONGSON_PCICMD_MPERR_CLR 	0x01000000
+#define LOONGSON_PCICMD_PERRRESPEN	0x00000040
+#define LOONGSON_PCICMD_ASTEPEN		0x00000080
+#define LOONGSON_PCICMD_SERREN		0x00000100
+#define LOONGSON_PCILTIMER_BUSLATENCY	0x0000ff00
+#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT	8
+
+/* Loongson h/w Configuration */
+
+#define LOONGSON_GENCFG_OFFSET		0x4
+#define LOONGSON_GENCFG	LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET)
+
+#define LOONGSON_GENCFG_DEBUGMODE	0x00000001
+#define LOONGSON_GENCFG_SNOOPEN		0x00000002
+#define LOONGSON_GENCFG_CPUSELFRESET	0x00000004
+
+#define LOONGSON_GENCFG_FORCE_IRQA	0x00000008
+#define LOONGSON_GENCFG_IRQA_ISOUT	0x00000010
+#define LOONGSON_GENCFG_IRQA_FROM_INT1	0x00000020
+#define LOONGSON_GENCFG_BYTESWAP	0x00000040
+
+#define LOONGSON_GENCFG_UNCACHED	0x00000080
+#define LOONGSON_GENCFG_PREFETCHEN	0x00000100
+#define LOONGSON_GENCFG_WBEHINDEN	0x00000200
+#define LOONGSON_GENCFG_CACHEALG	0x00000c00
+#define LOONGSON_GENCFG_CACHEALG_SHIFT	10
+#define LOONGSON_GENCFG_PCIQUEUE	0x00001000
+#define LOONGSON_GENCFG_CACHESTOP	0x00002000
+#define LOONGSON_GENCFG_MSTRBYTESWAP	0x00004000
+#define LOONGSON_GENCFG_BUSERREN	0x00008000
+#define LOONGSON_GENCFG_NORETRYTIMEOUT	0x00010000
+#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT	0x00020000
+
+/* PCI address map control */
+
+#define LOONGSON_PCIMAP			LOONGSON_REG(LOONGSON_REGBASE + 0x10)
+#define LOONGSON_PCIMEMBASECFG		LOONGSON_REG(LOONGSON_REGBASE + 0x14)
+#define LOONGSON_PCIMAP_CFG		LOONGSON_REG(LOONGSON_REGBASE + 0x18)
+
+/* GPIO Regs - r/w */
+
+#define LOONGSON_GPIODATA 		LOONGSON_REG(LOONGSON_REGBASE + 0x1c)
+#define LOONGSON_GPIOIE			LOONGSON_REG(LOONGSON_REGBASE + 0x20)
+
+/* ICU Configuration Regs - r/w */
+
+#define LOONGSON_INTEDGE		LOONGSON_REG(LOONGSON_REGBASE + 0x24)
+#define LOONGSON_INTSTEER 		LOONGSON_REG(LOONGSON_REGBASE + 0x28)
+#define LOONGSON_INTPOL			LOONGSON_REG(LOONGSON_REGBASE + 0x2c)
+
+/* ICU Enable Regs - IntEn & IntISR are r/o. */
+
+#define LOONGSON_INTENSET 		LOONGSON_REG(LOONGSON_REGBASE + 0x30)
+#define LOONGSON_INTENCLR 		LOONGSON_REG(LOONGSON_REGBASE + 0x34)
+#define LOONGSON_INTEN			LOONGSON_REG(LOONGSON_REGBASE + 0x38)
+#define LOONGSON_INTISR			LOONGSON_REG(LOONGSON_REGBASE + 0x3c)
+
+/* ICU */
+#define LOONGSON_ICU_MBOXES		0x0000000f
+#define LOONGSON_ICU_MBOXES_SHIFT 	0
+#define LOONGSON_ICU_DMARDY		0x00000010
+#define LOONGSON_ICU_DMAEMPTY		0x00000020
+#define LOONGSON_ICU_COPYRDY		0x00000040
+#define LOONGSON_ICU_COPYEMPTY		0x00000080
+#define LOONGSON_ICU_COPYERR		0x00000100
+#define LOONGSON_ICU_PCIIRQ		0x00000200
+#define LOONGSON_ICU_MASTERERR		0x00000400
+#define LOONGSON_ICU_SYSTEMERR		0x00000800
+#define LOONGSON_ICU_DRAMPERR		0x00001000
+#define LOONGSON_ICU_RETRYERR		0x00002000
+#define LOONGSON_ICU_GPIOS		0x01ff0000
+#define LOONGSON_ICU_GPIOS_SHIFT		16
+#define LOONGSON_ICU_GPINS		0x7e000000
+#define LOONGSON_ICU_GPINS_SHIFT		25
+#define LOONGSON_ICU_MBOX(N)		(1<<(LOONGSON_ICU_MBOXES_SHIFT+(N)))
+#define LOONGSON_ICU_GPIO(N)		(1<<(LOONGSON_ICU_GPIOS_SHIFT+(N)))
+#define LOONGSON_ICU_GPIN(N)		(1<<(LOONGSON_ICU_GPINS_SHIFT+(N)))
+
+/* PCI prefetch window base & mask */
+
+#define LOONGSON_MEM_WIN_BASE_L 	LOONGSON_REG(LOONGSON_REGBASE + 0x40)
+#define LOONGSON_MEM_WIN_BASE_H 	LOONGSON_REG(LOONGSON_REGBASE + 0x44)
+#define LOONGSON_MEM_WIN_MASK_L 	LOONGSON_REG(LOONGSON_REGBASE + 0x48)
+#define LOONGSON_MEM_WIN_MASK_H 	LOONGSON_REG(LOONGSON_REGBASE + 0x4c)
 
 /* PCI_Hit*_Sel_* */
 
-#define LOONGSON_PCI_HIT0_SEL_L     BONITO(BONITO_REGBASE + 0x50)
-#define LOONGSON_PCI_HIT0_SEL_H     BONITO(BONITO_REGBASE + 0x54)
-#define LOONGSON_PCI_HIT1_SEL_L     BONITO(BONITO_REGBASE + 0x58)
-#define LOONGSON_PCI_HIT1_SEL_H     BONITO(BONITO_REGBASE + 0x5c)
-#define LOONGSON_PCI_HIT2_SEL_L     BONITO(BONITO_REGBASE + 0x60)
-#define LOONGSON_PCI_HIT2_SEL_H     BONITO(BONITO_REGBASE + 0x64)
+#define LOONGSON_PCI_HIT0_SEL_L		LOONGSON_REG(LOONGSON_REGBASE + 0x50)
+#define LOONGSON_PCI_HIT0_SEL_H		LOONGSON_REG(LOONGSON_REGBASE + 0x54)
+#define LOONGSON_PCI_HIT1_SEL_L		LOONGSON_REG(LOONGSON_REGBASE + 0x58)
+#define LOONGSON_PCI_HIT1_SEL_H		LOONGSON_REG(LOONGSON_REGBASE + 0x5c)
+#define LOONGSON_PCI_HIT2_SEL_L		LOONGSON_REG(LOONGSON_REGBASE + 0x60)
+#define LOONGSON_PCI_HIT2_SEL_H		LOONGSON_REG(LOONGSON_REGBASE + 0x64)
 
 /* PXArb Config & Status */
 
-#define LOONGSON_PXARB_CFG      BONITO(BONITO_REGBASE + 0x68)
-#define LOONGSON_PXARB_STATUS       BONITO(BONITO_REGBASE + 0x6c)
+#define LOONGSON_PXARB_CFG		LOONGSON_REG(LOONGSON_REGBASE + 0x68)
+#define LOONGSON_PXARB_STATUS		LOONGSON_REG(LOONGSON_REGBASE + 0x6c)
+
+/* pcimap */
+
+#define LOONGSON_PCIMAP_PCIMAP_LO0	0x0000003f
+#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT	0
+#define LOONGSON_PCIMAP_PCIMAP_LO1	0x00000fc0
+#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT	6
+#define LOONGSON_PCIMAP_PCIMAP_LO2	0x0003f000
+#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT	12
+#define LOONGSON_PCIMAP_PCIMAP_2	0x00040000
+#define LOONGSON_PCIMAP_WIN(WIN, ADDR)	\
+	((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
+
+#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
+#include <linux/cpufreq.h>
+extern void loongson2_cpu_wait(void);
+extern struct cpufreq_frequency_table loongson2_clockmod_table[];
+
+/* Chip Config */
+#define LOONGSON_CHIPCFG0		LOONGSON_REG(LOONGSON_REGBASE + 0x80)
+#endif
+
+/*
+ * address windows configuration module
+ *
+ * loongson2e do not have this module
+ */
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+
+/* address window config module base address */
+#define LOONGSON_ADDRWINCFG_BASE		0x3ff00000ul
+#define LOONGSON_ADDRWINCFG_SIZE		0x180
+
+extern unsigned long _loongson_addrwincfg_base;
+#define LOONGSON_ADDRWINCFG(offset) \
+	(*(volatile u64 *)(_loongson_addrwincfg_base + (offset)))
+
+#define CPU_WIN0_BASE	LOONGSON_ADDRWINCFG(0x00)
+#define CPU_WIN1_BASE	LOONGSON_ADDRWINCFG(0x08)
+#define CPU_WIN2_BASE	LOONGSON_ADDRWINCFG(0x10)
+#define CPU_WIN3_BASE	LOONGSON_ADDRWINCFG(0x18)
+
+#define CPU_WIN0_MASK	LOONGSON_ADDRWINCFG(0x20)
+#define CPU_WIN1_MASK	LOONGSON_ADDRWINCFG(0x28)
+#define CPU_WIN2_MASK	LOONGSON_ADDRWINCFG(0x30)
+#define CPU_WIN3_MASK	LOONGSON_ADDRWINCFG(0x38)
+
+#define CPU_WIN0_MMAP	LOONGSON_ADDRWINCFG(0x40)
+#define CPU_WIN1_MMAP	LOONGSON_ADDRWINCFG(0x48)
+#define CPU_WIN2_MMAP	LOONGSON_ADDRWINCFG(0x50)
+#define CPU_WIN3_MMAP	LOONGSON_ADDRWINCFG(0x58)
+
+#define PCIDMA_WIN0_BASE	LOONGSON_ADDRWINCFG(0x60)
+#define PCIDMA_WIN1_BASE	LOONGSON_ADDRWINCFG(0x68)
+#define PCIDMA_WIN2_BASE	LOONGSON_ADDRWINCFG(0x70)
+#define PCIDMA_WIN3_BASE	LOONGSON_ADDRWINCFG(0x78)
+
+#define PCIDMA_WIN0_MASK	LOONGSON_ADDRWINCFG(0x80)
+#define PCIDMA_WIN1_MASK	LOONGSON_ADDRWINCFG(0x88)
+#define PCIDMA_WIN2_MASK	LOONGSON_ADDRWINCFG(0x90)
+#define PCIDMA_WIN3_MASK	LOONGSON_ADDRWINCFG(0x98)
+
+#define PCIDMA_WIN0_MMAP	LOONGSON_ADDRWINCFG(0xa0)
+#define PCIDMA_WIN1_MMAP	LOONGSON_ADDRWINCFG(0xa8)
+#define PCIDMA_WIN2_MMAP	LOONGSON_ADDRWINCFG(0xb0)
+#define PCIDMA_WIN3_MMAP	LOONGSON_ADDRWINCFG(0xb8)
+
+#define ADDRWIN_WIN0	0
+#define ADDRWIN_WIN1	1
+#define ADDRWIN_WIN2	2
+#define ADDRWIN_WIN3	3
+
+#define ADDRWIN_MAP_DST_DDR	0
+#define ADDRWIN_MAP_DST_PCI	1
+#define ADDRWIN_MAP_DST_LIO	1
+
+/*
+ * s: CPU, PCIDMA
+ * d: DDR, PCI, LIO
+ * win: 0, 1, 2, 3
+ * src: map source
+ * dst: map destination
+ * size: ~mask + 1
+ */
+#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
+	s##_WIN##w##_BASE = (src); \
+	s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
+	s##_WIN##w##_MASK = ~(size-1); \
+} while (0)
+
+#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \
+	LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size)
+#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \
+	LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size)
+#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \
+	LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size)
 
-/* loongson2-specific perf counter IRQ */
-#define LOONGSON2_PERFCNT_IRQ   (MIPS_CPU_IRQ_BASE + 6)
+#endif	/* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */
 
 #endif /* __ASM_MACH_LOONGSON_LOONGSON_H */

arch/mips/include/asm/mach-loongson/machine.h

@@ -13,10 +13,15 @@
 
 #ifdef CONFIG_LEMOTE_FULOONG2E
 
-#define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8)
-
 #define LOONGSON_MACHTYPE MACH_LEMOTE_FL2E
 
 #endif
 
+/* use fuloong2f as the default machine of LEMOTE_MACH2F */
+#ifdef CONFIG_LEMOTE_MACH2F
+
+#define LOONGSON_MACHTYPE MACH_LEMOTE_FL2F
+
+#endif
+
 #endif /* __ASM_MACH_LOONGSON_MACHINE_H */

arch/mips/include/asm/mach-loongson/mem.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
+ * Copyright (C) 2009 Lemote, Inc.
  * Author: Wu Zhangjin <wuzj@lemote.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -12,19 +12,30 @@
 #define __ASM_MACH_LOONGSON_MEM_H
 
 /*
- * On Lemote Loongson 2e
+ * high memory space
  *
- * the high memory space starts from 512M.
- * the peripheral registers reside between 0x1000:0000 and 0x2000:0000.
+ * in loongson2e, starts from 512M
+ * in loongson2f, starts from 2G 256M
  */
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_HIGHMEM_START	0x20000000
+#else
+#define LOONGSON_HIGHMEM_START	0x90000000
+#endif
 
-#ifdef CONFIG_LEMOTE_FULOONG2E
-
-#define LOONGSON_HIGHMEM_START  0x20000000
+/*
+ * the peripheral registers(MMIO):
+ *
+ * On the Lemote Loongson 2e system, reside between 0x1000:0000 and 0x2000:0000.
+ * On the Lemote Loongson 2f system, reside between 0x1000:0000 and 0x8000:0000.
+ */
 
 #define LOONGSON_MMIO_MEM_START 0x10000000
-#define LOONGSON_MMIO_MEM_END   0x20000000
 
+#ifdef CONFIG_CPU_LOONGSON2E
+#define LOONGSON_MMIO_MEM_END	0x20000000
+#else
+#define LOONGSON_MMIO_MEM_END	0x80000000
 #endif
 
 #endif /* __ASM_MACH_LOONGSON_MEM_H */

arch/mips/include/asm/mach-loongson/pci.h

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org>
+ * Copyright (c) 2009 Wu Zhangjin <wuzj@lemote.com>
  *
  * This program is free software; you can redistribute it
  * and/or modify it under the terms of the GNU General
@@ -22,16 +23,39 @@
 #ifndef __ASM_MACH_LOONGSON_PCI_H_
 #define __ASM_MACH_LOONGSON_PCI_H_
 
-extern struct pci_ops bonito64_pci_ops;
+extern struct pci_ops loongson_pci_ops;
 
-#ifdef CONFIG_LEMOTE_FULOONG2E
+/* this is an offset from mips_io_port_base */
+#define LOONGSON_PCI_IO_START	0x00004000UL
+
+#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
+
+/*
+ * we use address window2 to map cpu address space to pci space
+ * window2: cpu [1G, 2G] -> pci [1G, 2G]
+ * why not use window 0 & 1? because they are used by cpu when booting.
+ * window0: cpu [0, 256M] -> ddr [0, 256M]
+ * window1: cpu [256M, 512M] -> pci [256M, 512M]
+ */
+
+/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */
+#define LOONGSON_CPU_MEM_SRC	0x40000000ul		/* 1G */
+#define LOONGSON_PCI_MEM_DST	LOONGSON_CPU_MEM_SRC
+
+#define LOONGSON_PCI_MEM_START	LOONGSON_PCI_MEM_DST
+#define LOONGSON_PCI_MEM_END	(0x80000000ul-1)	/* 2G */
+
+#define MMAP_CPUTOPCI_SIZE	(LOONGSON_PCI_MEM_END - \
+					LOONGSON_PCI_MEM_START + 1)
+
+#else	/* loongson2f/32bit & loongson2e */
 
 /* this pci memory space is mapped by pcimap in pci.c */
-#define LOONGSON_PCI_MEM_START	BONITO_PCILO1_BASE
-#define LOONGSON_PCI_MEM_END	(BONITO_PCILO1_BASE + 0x04000000 * 2)
+#define LOONGSON_PCI_MEM_START	LOONGSON_PCILO1_BASE
+#define LOONGSON_PCI_MEM_END	(LOONGSON_PCILO1_BASE + 0x04000000 * 2)
 /* this is an offset from mips_io_port_base */
 #define LOONGSON_PCI_IO_START	0x00004000UL
 
-#endif
+#endif	/* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
 
 #endif /* !__ASM_MACH_LOONGSON_PCI_H_ */

arch/mips/include/asm/mach-powertv/asic.h

@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _ASM_MACH_POWERTV_ASIC_H
+#define _ASM_MACH_POWERTV_ASIC_H
+
+#include <linux/ioport.h>
+#include <asm/mach-powertv/asic_regs.h>
+
+#define DVR_CAPABLE     (1<<0)
+#define PCIE_CAPABLE    (1<<1)
+#define FFS_CAPABLE     (1<<2)
+#define DISPLAY_CAPABLE (1<<3)
+
+/* Platform Family types
+ * For compitability, the new value must be added in the end */
+enum family_type {
+	FAMILY_8500,
+	FAMILY_8500RNG,
+	FAMILY_4500,
+	FAMILY_1500,
+	FAMILY_8600,
+	FAMILY_4600,
+	FAMILY_4600VZA,
+	FAMILY_8600VZB,
+	FAMILY_1500VZE,
+	FAMILY_1500VZF,
+	FAMILIES
+};
+
+/* Register maps for each ASIC */
+extern const struct register_map calliope_register_map;
+extern const struct register_map cronus_register_map;
+extern const struct register_map zeus_register_map;
+
+extern struct resource dvr_cronus_resources[];
+extern struct resource dvr_zeus_resources[];
+extern struct resource non_dvr_calliope_resources[];
+extern struct resource non_dvr_cronus_resources[];
+extern struct resource non_dvr_cronuslite_resources[];
+extern struct resource non_dvr_vz_calliope_resources[];
+extern struct resource non_dvr_vze_calliope_resources[];
+extern struct resource non_dvr_vzf_calliope_resources[];
+extern struct resource non_dvr_zeus_resources[];
+
+extern void powertv_platform_init(void);
+extern void platform_alloc_bootmem(void);
+extern enum asic_type platform_get_asic(void);
+extern enum family_type platform_get_family(void);
+extern int platform_supports_dvr(void);
+extern int platform_supports_ffs(void);
+extern int platform_supports_pcie(void);
+extern int platform_supports_display(void);
+extern void configure_platform(void);
+extern void platform_configure_usb_ehci(void);
+extern void platform_unconfigure_usb_ehci(void);
+extern void platform_configure_usb_ohci(void);
+extern void platform_unconfigure_usb_ohci(void);
+
+/* Platform Resources */
+#define ASIC_RESOURCE_GET_EXISTS 1
+extern struct resource *asic_resource_get(const char *name);
+extern void platform_release_memory(void *baddr, int size);
+
+/* Reboot Cause */
+extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
+extern void set_locked_reboot_cause(char code, unsigned int data,
+	unsigned int data2);
+
+enum sys_reboot_type {
+	sys_unknown_reboot = 0x00,	/* Unknown reboot cause */
+	sys_davic_change = 0x01,	/* Reboot due to change in DAVIC
+					 * mode */
+	sys_user_reboot = 0x02,		/* Reboot initiated by user */
+	sys_system_reboot = 0x03,	/* Reboot initiated by OS */
+	sys_trap_reboot = 0x04,		/* Reboot due to a CPU trap */
+	sys_silent_reboot = 0x05,	/* Silent reboot */
+	sys_boot_ldr_reboot = 0x06,	/* Bootloader reboot */
+	sys_power_up_reboot = 0x07,	/* Power on bootup.  Older
+					 * drivers may report as
+					 * userReboot. */
+	sys_code_change = 0x08,		/* Reboot to take code change.
+					 * Older drivers may report as
+					 * userReboot. */
+	sys_hardware_reset = 0x09,	/* HW watchdog or front-panel
+					 * reset button reset.  Older
+					 * drivers may report as
+					 * userReboot. */
+	sys_watchdogInterrupt = 0x0A	/* Pre-watchdog interrupt */
+};
+
+#endif /* _ASM_MACH_POWERTV_ASIC_H */

arch/mips/include/asm/mach-powertv/asic_regs.h

@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2009  Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __ASM_MACH_POWERTV_ASIC_H_
+#define __ASM_MACH_POWERTV_ASIC_H_
+#include <linux/io.h>
+
+/* ASIC types */
+enum asic_type {
+	ASIC_UNKNOWN,
+	ASIC_ZEUS,
+	ASIC_CALLIOPE,
+	ASIC_CRONUS,
+	ASIC_CRONUSLITE,
+	ASICS
+};
+
+/* hardcoded values read from Chip Version registers */
+#define CRONUS_10	0x0B4C1C20
+#define CRONUS_11	0x0B4C1C21
+#define CRONUSLITE_10	0x0B4C1C40
+
+#define NAND_FLASH_BASE	0x03000000
+#define ZEUS_IO_BASE	0x09000000
+#define CALLIOPE_IO_BASE	0x08000000
+#define CRONUS_IO_BASE	0x09000000
+#define ASIC_IO_SIZE	0x01000000
+
+/* Definitions for backward compatibility */
+#define UART1_INTSTAT	uart1_intstat
+#define UART1_INTEN	uart1_inten
+#define UART1_CONFIG1	uart1_config1
+#define UART1_CONFIG2	uart1_config2
+#define UART1_DIVISORHI	uart1_divisorhi
+#define UART1_DIVISORLO	uart1_divisorlo
+#define UART1_DATA	uart1_data
+#define UART1_STATUS	uart1_status
+
+/* ASIC register enumeration */
+struct register_map {
+	u32 eic_slow0_strt_add;
+	u32 eic_cfg_bits;
+	u32 eic_ready_status;
+
+	u32 chipver3;
+	u32 chipver2;
+	u32 chipver1;
+	u32 chipver0;
+
+	u32 uart1_intstat;
+	u32 uart1_inten;
+	u32 uart1_config1;
+	u32 uart1_config2;
+	u32 uart1_divisorhi;
+	u32 uart1_divisorlo;
+	u32 uart1_data;
+	u32 uart1_status;
+
+	u32 int_stat_3;
+	u32 int_stat_2;
+	u32 int_stat_1;
+	u32 int_stat_0;
+	u32 int_config;
+	u32 int_int_scan;
+	u32 ien_int_3;
+	u32 ien_int_2;
+	u32 ien_int_1;
+	u32 ien_int_0;
+	u32 int_level_3_3;
+	u32 int_level_3_2;
+	u32 int_level_3_1;
+	u32 int_level_3_0;
+	u32 int_level_2_3;
+	u32 int_level_2_2;
+	u32 int_level_2_1;
+	u32 int_level_2_0;
+	u32 int_level_1_3;
+	u32 int_level_1_2;
+	u32 int_level_1_1;
+	u32 int_level_1_0;
+	u32 int_level_0_3;
+	u32 int_level_0_2;
+	u32 int_level_0_1;
+	u32 int_level_0_0;
+	u32 int_docsis_en;
+
+	u32 mips_pll_setup;
+	u32 usb_fs;
+	u32 test_bus;
+	u32 crt_spare;
+	u32 usb2_ohci_int_mask;
+	u32 usb2_strap;
+	u32 ehci_hcapbase;
+	u32 ohci_hc_revision;
+	u32 bcm1_bs_lmi_steer;
+	u32 usb2_control;
+	u32 usb2_stbus_obc;
+	u32 usb2_stbus_mess_size;
+	u32 usb2_stbus_chunk_size;
+
+	u32 pcie_regs;
+	u32 tim_ch;
+	u32 tim_cl;
+	u32 gpio_dout;
+	u32 gpio_din;
+	u32 gpio_dir;
+	u32 watchdog;
+	u32 front_panel;
+
+	u32 register_maps;
+};
+
+extern enum asic_type asic;
+extern const struct register_map *register_map;
+extern unsigned long asic_phy_base;	/* Physical address of ASIC */
+extern unsigned long asic_base;		/* Virtual address of ASIC */
+
+/*
+ * Macros to interface to registers through their ioremapped address
+ * asic_reg_offset	Returns the offset of a given register from the start
+ *			of the ASIC address space
+ * asic_reg_phys_addr	Returns the physical address of the given register
+ * asic_reg_addr	Returns the iomapped virtual address of the given
+ *			register.
+ */
+#define asic_reg_offset(x)	(register_map->x)
+#define asic_reg_phys_addr(x)	(asic_phy_base + asic_reg_offset(x))
+#define asic_reg_addr(x) \
+	((unsigned int *) (asic_base + asic_reg_offset(x)))
+
+/*
+ * The asic_reg macro is gone. It should be replaced by either asic_read or
+ * asic_write, as appropriate.
+ */
+
+#define asic_read(x)		readl(asic_reg_addr(x))
+#define asic_write(v, x)	writel(v, asic_reg_addr(x))
+
+extern void asic_irq_init(void);
+#endif