Merge branch 'topic/hda' into for-linus

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -860,7 +860,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     [Multiple options for each card instance]
     model	- force the model name
-    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
+    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF,
+    		   3 = VIACOMBO, 4 = COMBO)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
     		  When the bit 8 (0x100) is set, the lower 8 bits are used
 		  as the "fixed" codec slots; i.e. the driver probes the
@@ -925,6 +926,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	    (Usually SD_LPIB register is more accurate than the
 	    position buffer.)
 
+	    position_fix=3 is specific to VIA devices.  The position
+	    of the capture stream is checked from both LPIB and POSBUF
+	    values.  position_fix=4 is a combination mode, using LPIB
+	    for playback and POSBUF for capture.
+
     NB: If you get many "azx_get_response timeout" messages at
     loading, it's likely a problem of interrupts (e.g. ACPI irq
     routing).  Try to boot with options like "pci=noacpi".  Also, you

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -8,37 +8,10 @@ ALC880
   5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
   6stack	6-jack in back, 2-jack in front
   6stack-digout	6-jack with a SPDIF out
-  w810		3-jack
-  z71v		3-jack (HP shared SPDIF)
-  asus		3-jack (ASUS Mobo)
-  asus-w1v	ASUS W1V
-  asus-dig	ASUS with SPDIF out
-  asus-dig2	ASUS with SPDIF out (using GPIO2)
-  uniwill	3-jack
-  fujitsu	Fujitsu Laptops (Pi1536)
-  F1734		2-jack
-  lg		LG laptop (m1 express dual)
-  lg-lw		LG LW20/LW25 laptop
-  tcl		TCL S700
-  clevo		Clevo laptops (m520G, m665n)
-  medion	Medion Rim 2150
-  test		for testing/debugging purpose, almost all controls can be
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
 
 ALC260
 ======
-  fujitsu	Fujitsu S7020
-  acer		Acer TravelMate
-  will		Will laptops (PB V7900)
-  replacer	Replacer 672V
-  favorit100	Maxdata Favorit 100XS
-  basic		fixed pin assignment (old default model)
-  test		for testing/debugging purpose, almost all controls can
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC262
 ======
@@ -70,55 +43,7 @@ ALC680
 
 ALC882/883/885/888/889
 ======================
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack digital with SPDIF I/O
-  arima		Arima W820Di1
-  targa		Targa T8, MSI-1049 T8
-  asus-a7j	ASUS A7J
-  asus-a7m	ASUS A7M
-  macpro	MacPro support
-  mb5		Macbook 5,1
-  macmini3	Macmini 3,1
-  mba21		Macbook Air 2,1
-  mbp3		Macbook Pro rev3
-  imac24	iMac 24'' with jack detection
-  imac91	iMac 9,1
-  w2jc		ASUS W2JC
-  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
-  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
-  3stack-6ch    3-jack 6-channel
-  3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
-  6stack-dig-demo  6-jack digital for Intel demo board
-  acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
-  acer-aspire	Acer Aspire 9810
-  acer-aspire-4930g Acer Aspire 4930G
-  acer-aspire-6530g Acer Aspire 6530G
-  acer-aspire-7730g Acer Aspire 7730G
-  acer-aspire-8930g Acer Aspire 8930G
-  medion	Medion Laptops
-  targa-dig	Targa/MSI
-  targa-2ch-dig	Targa/MSI with 2-channel
-  targa-8ch-dig Targa/MSI with 8-channel (MSI GX620)
-  laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
-  lenovo-101e	Lenovo 101E
-  lenovo-nb0763	Lenovo NB0763
-  lenovo-ms7195-dig Lenovo MS7195
-  lenovo-sky	Lenovo Sky
-  haier-w66	Haier W66
-  3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
-  6stack-dell	Dell machines with 6stack (Inspiron 530)
-  mitac		Mitac 8252D
-  clevo-m540r	Clevo M540R (6ch + digital)
-  clevo-m720	Clevo M720 laptop series
-  fujitsu-pi2515 Fujitsu AMILO Pi2515
-  fujitsu-xa3530 Fujitsu AMILO XA3530
-  3stack-6ch-intel Intel DG33* boards
-  intel-alc889a	Intel IbexPeak with ALC889A
-  intel-x58	Intel DX58 with ALC889
-  asus-p5q	ASUS P5Q-EM boards
-  mb31		MacBook 3,1
-  sony-vaio-tt  Sony VAIO TT
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC861/660
 ==========

Documentation/sound/alsa/HD-Audio.txt

@@ -59,7 +59,12 @@ a case, you can change the default method via `position_fix` option.
 `position_fix=1` means to use LPIB method explicitly.
 `position_fix=2` means to use the position-buffer.
 `position_fix=3` means to use a combination of both methods, needed
-for some VIA and ATI controllers.  0 is the default value for all other
+for some VIA controllers.  The capture stream position is corrected
+by comparing both LPIB and position-buffer values.
+`position_fix=4` is another combination available for all controllers,
+and uses LPIB for the playback and the position-buffer for the capture
+streams.
+0 is the default value for all other
 controllers, the automatic check and fallback to LPIB as described in
 the above.  If you get a problem of repeated sounds, this option might
 help.

include/sound/control.h

@@ -227,6 +227,11 @@ snd_ctl_add_slave_uncached(struct snd_kcontrol *master,
 	return _snd_ctl_add_slave(master, slave, SND_CTL_SLAVE_NEED_UPDATE);
 }
 
+int snd_ctl_add_vmaster_hook(struct snd_kcontrol *kctl,
+			     void (*hook)(void *private_data, int),
+			     void *private_data);
+void snd_ctl_sync_vmaster_hook(struct snd_kcontrol *kctl);
+
 /*
  * Helper functions for jack-detection controls
  */

sound/core/vmaster.c

@@ -37,6 +37,8 @@ struct link_master {
 	struct link_ctl_info info;
 	int val;		/* the master value */
 	unsigned int tlv[4];
+	void (*hook)(void *private_data, int);
+	void *hook_private_data;
 };
 
 /*
@@ -126,7 +128,9 @@ static int master_init(struct link_master *master)
 		master->info.count = 1; /* always mono */
 		/* set full volume as default (= no attenuation) */
 		master->val = master->info.max_val;
-		return 0;
+		if (master->hook)
+			master->hook(master->hook_private_data, master->val);
+		return 1;
 	}
 	return -ENOENT;
 }
@@ -329,6 +333,8 @@ static int master_put(struct snd_kcontrol *kcontrol,
 		slave_put_val(slave, uval);
 	}
 	kfree(uval);
+	if (master->hook && !err)
+		master->hook(master->hook_private_data, master->val);
 	return 1;
 }
 
@@ -408,3 +414,41 @@ struct snd_kcontrol *snd_ctl_make_virtual_master(char *name,
 	return kctl;
 }
 EXPORT_SYMBOL(snd_ctl_make_virtual_master);
+
+/**
+ * snd_ctl_add_vmaster_hook - Add a hook to a vmaster control
+ * @kcontrol: vmaster kctl element
+ * @hook: the hook function
+ *
+ * Adds the given hook to the vmaster control element so that it's called
+ * at each time when the value is changed.
+ */
+int snd_ctl_add_vmaster_hook(struct snd_kcontrol *kcontrol,
+			     void (*hook)(void *private_data, int),
+			     void *private_data)
+{
+	struct link_master *master = snd_kcontrol_chip(kcontrol);
+	master->hook = hook;
+	master->hook_private_data = private_data;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_ctl_add_vmaster_hook);
+
+/**
+ * snd_ctl_sync_vmaster_hook - Sync the vmaster hook
+ * @kcontrol: vmaster kctl element
+ *
+ * Call the hook function to synchronize with the current value of the given
+ * vmaster element.  NOP when NULL is passed to @kcontrol or the hook doesn't
+ * exist.
+ */
+void snd_ctl_sync_vmaster_hook(struct snd_kcontrol *kcontrol)
+{
+	struct link_master *master;
+	if (!kcontrol)
+		return;
+	master = snd_kcontrol_chip(kcontrol);
+	if (master->hook)
+		master->hook(master->hook_private_data, master->val);
+}
+EXPORT_SYMBOL_GPL(snd_ctl_sync_vmaster_hook);

sound/pci/hda/alc260_quirks.c

@@ -1,968 +0,0 @@
-/*
- * ALC260 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC260 models */
-enum {
-	ALC260_AUTO,
-	ALC260_BASIC,
-	ALC260_FUJITSU_S702X,
-	ALC260_ACER,
-	ALC260_WILL,
-	ALC260_REPLACER_672V,
-	ALC260_FAVORIT100,
-#ifdef CONFIG_SND_DEBUG
-	ALC260_TEST,
-#endif
-	ALC260_MODEL_LAST /* last tag */
-};
-
-static const hda_nid_t alc260_dac_nids[1] = {
-	/* front */
-	0x02,
-};
-
-static const hda_nid_t alc260_adc_nids[1] = {
-	/* ADC0 */
-	0x04,
-};
-
-static const hda_nid_t alc260_adc_nids_alt[1] = {
-	/* ADC1 */
-	0x05,
-};
-
-/* NIDs used when simultaneous access to both ADCs makes sense.  Note that
- * alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
- */
-static const hda_nid_t alc260_dual_adc_nids[2] = {
-	/* ADC0, ADC1 */
-	0x04, 0x05
-};
-
-#define ALC260_DIGOUT_NID	0x03
-#define ALC260_DIGIN_NID	0x06
-
-static const struct hda_input_mux alc260_capture_source = {
-	.num_items = 4,
-	.items = {
-		{ "Mic", 0x0 },
-		{ "Front Mic", 0x1 },
-		{ "Line", 0x2 },
-		{ "CD", 0x4 },
-	},
-};
-
-/* On Fujitsu S702x laptops capture only makes sense from Mic/LineIn jack,
- * headphone jack and the internal CD lines since these are the only pins at
- * which audio can appear.  For flexibility, also allow the option of
- * recording the mixer output on the second ADC (ADC0 doesn't have a
- * connection to the mixer output).
- */
-static const struct hda_input_mux alc260_fujitsu_capture_sources[2] = {
-	{
-		.num_items = 3,
-		.items = {
-			{ "Mic/Line", 0x0 },
-			{ "CD", 0x4 },
-			{ "Headphone", 0x2 },
-		},
-	},
-	{
-		.num_items = 4,
-		.items = {
-			{ "Mic/Line", 0x0 },
-			{ "CD", 0x4 },
-			{ "Headphone", 0x2 },
-			{ "Mixer", 0x5 },
-		},
-	},
-
-};
-
-/* Acer TravelMate(/Extensa/Aspire) notebooks have similar configuration to
- * the Fujitsu S702x, but jacks are marked differently.
- */
-static const struct hda_input_mux alc260_acer_capture_sources[2] = {
-	{
-		.num_items = 4,
-		.items = {
-			{ "Mic", 0x0 },
-			{ "Line", 0x2 },
-			{ "CD", 0x4 },
-			{ "Headphone", 0x5 },
-		},
-	},
-	{
-		.num_items = 5,
-		.items = {
-			{ "Mic", 0x0 },
-			{ "Line", 0x2 },
-			{ "CD", 0x4 },
-			{ "Headphone", 0x6 },
-			{ "Mixer", 0x5 },
-		},
-	},
-};
-
-/* Maxdata Favorit 100XS */
-static const struct hda_input_mux alc260_favorit100_capture_sources[2] = {
-	{
-		.num_items = 2,
-		.items = {
-			{ "Line/Mic", 0x0 },
-			{ "CD", 0x4 },
-		},
-	},
-	{
-		.num_items = 3,
-		.items = {
-			{ "Line/Mic", 0x0 },
-			{ "CD", 0x4 },
-			{ "Mixer", 0x5 },
-		},
-	},
-};
-
-/*
- * This is just place-holder, so there's something for alc_build_pcms to look
- * at when it calculates the maximum number of channels. ALC260 has no mixer
- * element which allows changing the channel mode, so the verb list is
- * never used.
- */
-static const struct hda_channel_mode alc260_modes[1] = {
-	{ 2, NULL },
-};
-
-
-/* Mixer combinations
- *
- * basic: base_output + input + pc_beep + capture
- * fujitsu: fujitsu + capture
- * acer: acer + capture
- */
-
-static const struct snd_kcontrol_new alc260_base_output_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x08, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x09, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Headphone Playback Switch", 0x09, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
-	{ } /* end */
-};
-
-static const struct snd_kcontrol_new alc260_input_mixer[] = {
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x07, 0x01, HDA_INPUT),
-	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x07, 0x01, HDA_INPUT),
-	{ } /* end */
-};
-
-/* Fujitsu S702x series laptops.  ALC260 pin usage: Mic/Line jack = 0x12,
- * HP jack = 0x14, CD audio =  0x16, internal speaker = 0x10.
- */
-static const struct snd_kcontrol_new alc260_fujitsu_mixer[] = {
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Headphone Playback Switch", 0x08, 2, HDA_INPUT),
-	ALC_PIN_MODE("Headphone Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic/Line Playback Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic/Line Playback Switch", 0x07, 0x0, HDA_INPUT),
-	ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN),
-	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT),
-	{ } /* end */
-};
-
-/* Mixer for Acer TravelMate(/Extensa/Aspire) notebooks.  Note that current
- * versions of the ALC260 don't act on requests to enable mic bias from NID
- * 0x0f (used to drive the headphone jack in these laptops).  The ALC260
- * datasheet doesn't mention this restriction.  At this stage it's not clear
- * whether this behaviour is intentional or is a hardware bug in chip
- * revisions available in early 2006.  Therefore for now allow the
- * "Headphone Jack Mode" control to span all choices, but if it turns out
- * that the lack of mic bias for this NID is intentional we could change the
- * mode from ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
- *
- * In addition, Acer TravelMate(/Extensa/Aspire) notebooks in early 2006
- * don't appear to make the mic bias available from the "line" jack, even
- * though the NID used for this jack (0x14) can supply it.  The theory is
- * that perhaps Acer have included blocking capacitors between the ALC260
- * and the output jack.  If this turns out to be the case for all such
- * models the "Line Jack Mode" mode could be changed from ALC_PIN_DIR_INOUT
- * to ALC_PIN_DIR_INOUT_NOMICBIAS.
- *
- * The C20x Tablet series have a mono internal speaker which is controlled
- * via the chip's Mono sum widget and pin complex, so include the necessary
- * controls for such models.  On models without a "mono speaker" the control
- * won't do anything.
- */
-static const struct snd_kcontrol_new alc260_acer_mixer[] = {
-	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
-	ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
-	HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0,
-			      HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2,
-			   HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
-	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
-	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
-	{ } /* end */
-};
-
-/* Maxdata Favorit 100XS: one output and one input (0x12) jack
- */
-static const struct snd_kcontrol_new alc260_favorit100_mixer[] = {
-	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
-	ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
-	HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
-	ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
-	{ } /* end */
-};
-
-/* Packard bell V7900  ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
- * Line In jack = 0x14, CD audio =  0x16, pc beep = 0x17.
- */
-static const struct snd_kcontrol_new alc260_will_mixer[] = {
-	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
-	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
-	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
-	{ } /* end */
-};
-
-/* Replacer 672V ALC260 pin usage: Mic jack = 0x12,
- * Line In jack = 0x14, ATAPI Mic = 0x13, speaker = 0x0f.
- */
-static const struct snd_kcontrol_new alc260_replacer_672v_mixer[] = {
-	HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Master Playback Switch", 0x08, 0x2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
-	ALC_PIN_MODE("Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
-	HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x07, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("ATATI Mic Playback Switch", 0x07, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x07, 0x02, HDA_INPUT),
-	ALC_PIN_MODE("Line Jack Mode", 0x14, ALC_PIN_DIR_INOUT),
-	{ } /* end */
-};
-
-/*
- * initialization verbs
- */
-static const struct hda_verb alc260_init_verbs[] = {
-	/* Line In pin widget for input */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	/* CD pin widget for input */
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	/* Mic1 (rear panel) pin widget for input and vref at 80% */
-	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	/* Mic2 (front panel) pin widget for input and vref at 80% */
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	/* LINE-2 is used for line-out in rear */
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	/* select line-out */
-	{0x0e, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* LINE-OUT pin */
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	/* enable HP */
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	/* enable Mono */
-	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	/* mute capture amp left and right */
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	/* set connection select to line in (default select for this ADC) */
-	{0x04, AC_VERB_SET_CONNECT_SEL, 0x02},
-	/* mute capture amp left and right */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	/* set connection select to line in (default select for this ADC) */
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x02},
-	/* set vol=0 Line-Out mixer amp left and right */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	/* unmute pin widget amp left and right (no gain on this amp) */
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* set vol=0 HP mixer amp left and right */
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	/* unmute pin widget amp left and right (no gain on this amp) */
-	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* set vol=0 Mono mixer amp left and right */
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	/* unmute pin widget amp left and right (no gain on this amp) */
-	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* unmute LINE-2 out pin */
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Amp Indexes: CD = 0x04, Line In 1 = 0x02, Mic 1 = 0x00 &
-	 * Line In 2 = 0x03
-	 */
-	/* mute analog inputs */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	/* Amp Indexes: DAC = 0x01 & mixer = 0x00 */
-	/* mute Front out path */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* mute Headphone out path */
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* mute Mono out path */
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{ }
-};
-
-/* Initialisation sequence for ALC260 as configured in Fujitsu S702x
- * laptops.  ALC260 pin usage: Mic/Line jack = 0x12, HP jack = 0x14, CD
- * audio = 0x16, internal speaker = 0x10.
- */
-static const struct hda_verb alc260_fujitsu_init_verbs[] = {
-	/* Disable all GPIOs */
-	{0x01, AC_VERB_SET_GPIO_MASK, 0},
-	/* Internal speaker is connected to headphone pin */
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	/* Headphone/Line-out jack connects to Line1 pin; make it an output */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	/* Mic/Line-in jack is connected to mic1 pin, so make it an input */
-	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	/* Ensure all other unused pins are disabled and muted. */
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-
-	/* Disable digital (SPDIF) pins */
-	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
-	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
-	/* Ensure Line1 pin widget takes its input from the OUT1 sum bus
-	 * when acting as an output.
-	 */
-	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-
-	/* Start with output sum widgets muted and their output gains at min */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
-	/* Unmute HP pin widget amp left and right (no equiv mixer ctrl) */
-	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Unmute Line1 pin widget output buffer since it starts as an output.
-	 * If the pin mode is changed by the user the pin mode control will
-	 * take care of enabling the pin's input/output buffers as needed.
-	 * Therefore there's no need to enable the input buffer at this
-	 * stage.
-	 */
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Unmute input buffer of pin widget used for Line-in (no equiv
-	 * mixer ctrl)
-	 */
-	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
-	/* Mute capture amp left and right */
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	/* Set ADC connection select to match default mixer setting - line
-	 * in (on mic1 pin)
-	 */
-	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Do the same for the second ADC: mute capture input amp and
-	 * set ADC connection to line in (on mic1 pin)
-	 */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Mute all inputs to mixer widget (even unconnected ones) */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
-	{ }
-};
-
-/* Initialisation sequence for ALC260 as configured in Acer TravelMate and
- * similar laptops (adapted from Fujitsu init verbs).
- */
-static const struct hda_verb alc260_acer_init_verbs[] = {
-	/* On TravelMate laptops, GPIO 0 enables the internal speaker and
-	 * the headphone jack.  Turn this on and rely on the standard mute
-	 * methods whenever the user wants to turn these outputs off.
-	 */
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
-	/* Internal speaker/Headphone jack is connected to Line-out pin */
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	/* Internal microphone/Mic jack is connected to Mic1 pin */
-	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
-	/* Line In jack is connected to Line1 pin */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	/* Some Acers (eg: C20x Tablets) use Mono pin for internal speaker */
-	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	/* Ensure all other unused pins are disabled and muted. */
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	/* Disable digital (SPDIF) pins */
-	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
-	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
-	/* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
-	 * bus when acting as outputs.
-	 */
-	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
-	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-
-	/* Start with output sum widgets muted and their output gains at min */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
-	/* Unmute Line-out pin widget amp left and right
-	 * (no equiv mixer ctrl)
-	 */
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Unmute mono pin widget amp output (no equiv mixer ctrl) */
-	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Unmute Mic1 and Line1 pin widget input buffers since they start as
-	 * inputs. If the pin mode is changed by the user the pin mode control
-	 * will take care of enabling the pin's input/output buffers as needed.
-	 * Therefore there's no need to enable the input buffer at this
-	 * stage.
-	 */
-	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
-	/* Mute capture amp left and right */
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	/* Set ADC connection select to match default mixer setting - mic
-	 * (on mic1 pin)
-	 */
-	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Do similar with the second ADC: mute capture input amp and
-	 * set ADC connection to mic to match ALSA's default state.
-	 */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Mute all inputs to mixer widget (even unconnected ones) */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
-	{ }
-};
-
-/* Initialisation sequence for Maxdata Favorit 100XS
- * (adapted from Acer init verbs).
- */
-static const struct hda_verb alc260_favorit100_init_verbs[] = {
-	/* GPIO 0 enables the output jack.
-	 * Turn this on and rely on the standard mute
-	 * methods whenever the user wants to turn these outputs off.
-	 */
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
-	/* Line/Mic input jack is connected to Mic1 pin */
-	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
-	/* Ensure all other unused pins are disabled and muted. */
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	/* Disable digital (SPDIF) pins */
-	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
-	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
-	/* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
-	 * bus when acting as outputs.
-	 */
-	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
-	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-
-	/* Start with output sum widgets muted and their output gains at min */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
-	/* Unmute Line-out pin widget amp left and right
-	 * (no equiv mixer ctrl)
-	 */
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Unmute Mic1 and Line1 pin widget input buffers since they start as
-	 * inputs. If the pin mode is changed by the user the pin mode control
-	 * will take care of enabling the pin's input/output buffers as needed.
-	 * Therefore there's no need to enable the input buffer at this
-	 * stage.
-	 */
-	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
-	/* Mute capture amp left and right */
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	/* Set ADC connection select to match default mixer setting - mic
-	 * (on mic1 pin)
-	 */
-	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Do similar with the second ADC: mute capture input amp and
-	 * set ADC connection to mic to match ALSA's default state.
-	 */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Mute all inputs to mixer widget (even unconnected ones) */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
-	{ }
-};
-
-static const struct hda_verb alc260_will_verbs[] = {
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x0b, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
-	{0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
-	{0x1a, AC_VERB_SET_PROC_COEF, 0x3040},
-	{}
-};
-
-static const struct hda_verb alc260_replacer_672v_verbs[] = {
-	{0x0f, AC_VERB_SET_EAPD_BTLENABLE, 0x02},
-	{0x1a, AC_VERB_SET_COEF_INDEX, 0x07},
-	{0x1a, AC_VERB_SET_PROC_COEF, 0x3050},
-
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
-
-	{0x0f, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{}
-};
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc260_replacer_672v_automute(struct hda_codec *codec)
-{
-        unsigned int present;
-
-	/* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */
-	present = snd_hda_jack_detect(codec, 0x0f);
-	if (present) {
-		snd_hda_codec_write_cache(codec, 0x01, 0,
-					  AC_VERB_SET_GPIO_DATA, 1);
-		snd_hda_codec_write_cache(codec, 0x0f, 0,
-					  AC_VERB_SET_PIN_WIDGET_CONTROL,
-					  PIN_HP);
-	} else {
-		snd_hda_codec_write_cache(codec, 0x01, 0,
-					  AC_VERB_SET_GPIO_DATA, 0);
-		snd_hda_codec_write_cache(codec, 0x0f, 0,
-					  AC_VERB_SET_PIN_WIDGET_CONTROL,
-					  PIN_OUT);
-	}
-}
-
-static void alc260_replacer_672v_unsol_event(struct hda_codec *codec,
-                                       unsigned int res)
-{
-        if ((res >> 26) == ALC_HP_EVENT)
-                alc260_replacer_672v_automute(codec);
-}
-
-static const struct hda_verb alc260_hp_dc7600_verbs[] = {
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x01},
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x10, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{}
-};
-
-/* Test configuration for debugging, modelled after the ALC880 test
- * configuration.
- */
-#ifdef CONFIG_SND_DEBUG
-static const hda_nid_t alc260_test_dac_nids[1] = {
-	0x02,
-};
-static const hda_nid_t alc260_test_adc_nids[2] = {
-	0x04, 0x05,
-};
-/* For testing the ALC260, each input MUX needs its own definition since
- * the signal assignments are different.  This assumes that the first ADC
- * is NID 0x04.
- */
-static const struct hda_input_mux alc260_test_capture_sources[2] = {
-	{
-		.num_items = 7,
-		.items = {
-			{ "MIC1 pin", 0x0 },
-			{ "MIC2 pin", 0x1 },
-			{ "LINE1 pin", 0x2 },
-			{ "LINE2 pin", 0x3 },
-			{ "CD pin", 0x4 },
-			{ "LINE-OUT pin", 0x5 },
-			{ "HP-OUT pin", 0x6 },
-		},
-        },
-	{
-		.num_items = 8,
-		.items = {
-			{ "MIC1 pin", 0x0 },
-			{ "MIC2 pin", 0x1 },
-			{ "LINE1 pin", 0x2 },
-			{ "LINE2 pin", 0x3 },
-			{ "CD pin", 0x4 },
-			{ "Mixer", 0x5 },
-			{ "LINE-OUT pin", 0x6 },
-			{ "HP-OUT pin", 0x7 },
-		},
-        },
-};
-static const struct snd_kcontrol_new alc260_test_mixer[] = {
-	/* Output driver widgets */
-	HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Mono Playback Switch", 0x0a, 1, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x09, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("LOUT2 Playback Switch", 0x09, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x08, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("LOUT1 Playback Switch", 0x08, 2, HDA_INPUT),
-
-	/* Modes for retasking pin widgets
-	 * Note: the ALC260 doesn't seem to act on requests to enable mic
-         * bias from NIDs 0x0f and 0x10.  The ALC260 datasheet doesn't
-         * mention this restriction.  At this stage it's not clear whether
-         * this behaviour is intentional or is a hardware bug in chip
-         * revisions available at least up until early 2006.  Therefore for
-         * now allow the "HP-OUT" and "LINE-OUT" Mode controls to span all
-         * choices, but if it turns out that the lack of mic bias for these
-         * NIDs is intentional we could change their modes from
-         * ALC_PIN_DIR_INOUT to ALC_PIN_DIR_INOUT_NOMICBIAS.
-	 */
-	ALC_PIN_MODE("HP-OUT pin mode", 0x10, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("LINE-OUT pin mode", 0x0f, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("LINE2 pin mode", 0x15, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("LINE1 pin mode", 0x14, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("MIC2 pin mode", 0x13, ALC_PIN_DIR_INOUT),
-	ALC_PIN_MODE("MIC1 pin mode", 0x12, ALC_PIN_DIR_INOUT),
-
-	/* Loopback mixer controls */
-	HDA_CODEC_VOLUME("MIC1 Playback Volume", 0x07, 0x00, HDA_INPUT),
-	HDA_CODEC_MUTE("MIC1 Playback Switch", 0x07, 0x00, HDA_INPUT),
-	HDA_CODEC_VOLUME("MIC2 Playback Volume", 0x07, 0x01, HDA_INPUT),
-	HDA_CODEC_MUTE("MIC2 Playback Switch", 0x07, 0x01, HDA_INPUT),
-	HDA_CODEC_VOLUME("LINE1 Playback Volume", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("LINE1 Playback Switch", 0x07, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("LINE2 Playback Volume", 0x07, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("LINE2 Playback Switch", 0x07, 0x03, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("LINE-OUT loopback Playback Volume", 0x07, 0x06, HDA_INPUT),
-	HDA_CODEC_MUTE("LINE-OUT loopback Playback Switch", 0x07, 0x06, HDA_INPUT),
-	HDA_CODEC_VOLUME("HP-OUT loopback Playback Volume", 0x07, 0x7, HDA_INPUT),
-	HDA_CODEC_MUTE("HP-OUT loopback Playback Switch", 0x07, 0x7, HDA_INPUT),
-
-	/* Controls for GPIO pins, assuming they are configured as outputs */
-	ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
-	ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
-	ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
-	ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
-
-	/* Switches to allow the digital IO pins to be enabled.  The datasheet
-	 * is ambigious as to which NID is which; testing on laptops which
-	 * make this output available should provide clarification.
-	 */
-	ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x03, 0x01),
-	ALC_SPDIF_CTRL_SWITCH("SPDIF Capture Switch", 0x06, 0x01),
-
-	/* A switch allowing EAPD to be enabled.  Some laptops seem to use
-	 * this output to turn on an external amplifier.
-	 */
-	ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
-	ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
-
-	{ } /* end */
-};
-static const struct hda_verb alc260_test_init_verbs[] = {
-	/* Enable all GPIOs as outputs with an initial value of 0 */
-	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x0f},
-	{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
-	{0x01, AC_VERB_SET_GPIO_MASK, 0x0f},
-
-	/* Enable retasking pins as output, initially without power amp */
-	{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-
-	/* Disable digital (SPDIF) pins initially, but users can enable
-	 * them via a mixer switch.  In the case of SPDIF-out, this initverb
-	 * payload also sets the generation to 0, output to be in "consumer"
-	 * PCM format, copyright asserted, no pre-emphasis and no validity
-	 * control.
-	 */
-	{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
-	{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},
-
-	/* Ensure mic1, mic2, line1 and line2 pin widgets take input from the
-	 * OUT1 sum bus when acting as an output.
-	 */
-	{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
-	{0x0c, AC_VERB_SET_CONNECT_SEL, 0},
-	{0x0d, AC_VERB_SET_CONNECT_SEL, 0},
-	{0x0e, AC_VERB_SET_CONNECT_SEL, 0},
-
-	/* Start with output sum widgets muted and their output gains at min */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-
-	/* Unmute retasking pin widget output buffers since the default
-	 * state appears to be output.  As the pin mode is changed by the
-	 * user the pin mode control will take care of enabling the pin's
-	 * input/output buffers as needed.
-	 */
-	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Also unmute the mono-out pin widget */
-	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
-	/* Mute capture amp left and right */
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	/* Set ADC connection select to match default mixer setting (mic1
-	 * pin)
-	 */
-	{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Do the same for the second ADC: mute capture input amp and
-	 * set ADC connection to mic1 pin
-	 */
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Mute all inputs to mixer widget (even unconnected ones) */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */
-
-	{ }
-};
-#endif
-
-/*
- * ALC260 configurations
- */
-static const char * const alc260_models[ALC260_MODEL_LAST] = {
-	[ALC260_BASIC]		= "basic",
-	[ALC260_FUJITSU_S702X]	= "fujitsu",
-	[ALC260_ACER]		= "acer",
-	[ALC260_WILL]		= "will",
-	[ALC260_REPLACER_672V]	= "replacer",
-	[ALC260_FAVORIT100]	= "favorit100",
-#ifdef CONFIG_SND_DEBUG
-	[ALC260_TEST]		= "test",
-#endif
-	[ALC260_AUTO]		= "auto",
-};
-
-static const struct snd_pci_quirk alc260_cfg_tbl[] = {
-	SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER),
-	SND_PCI_QUIRK(0x1025, 0x007f, "Acer", ALC260_WILL),
-	SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
-	SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
-	SND_PCI_QUIRK(0x104d, 0x81bb, "Sony VAIO", ALC260_BASIC),
-	SND_PCI_QUIRK(0x104d, 0x81cc, "Sony VAIO", ALC260_BASIC),
-	SND_PCI_QUIRK(0x104d, 0x81cd, "Sony VAIO", ALC260_BASIC),
-	SND_PCI_QUIRK(0x10cf, 0x1326, "Fujitsu S702X", ALC260_FUJITSU_S702X),
-	SND_PCI_QUIRK(0x152d, 0x0729, "CTL U553W", ALC260_BASIC),
-	SND_PCI_QUIRK(0x161f, 0x2057, "Replacer 672V", ALC260_REPLACER_672V),
-	SND_PCI_QUIRK(0x1631, 0xc017, "PB V7900", ALC260_WILL),
-	{}
-};
-
-static const struct alc_config_preset alc260_presets[] = {
-	[ALC260_BASIC] = {
-		.mixers = { alc260_base_output_mixer,
-			    alc260_input_mixer },
-		.init_verbs = { alc260_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
-		.dac_nids = alc260_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
-		.adc_nids = alc260_dual_adc_nids,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.input_mux = &alc260_capture_source,
-	},
-	[ALC260_FUJITSU_S702X] = {
-		.mixers = { alc260_fujitsu_mixer },
-		.init_verbs = { alc260_fujitsu_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
-		.dac_nids = alc260_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
-		.adc_nids = alc260_dual_adc_nids,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.num_mux_defs = ARRAY_SIZE(alc260_fujitsu_capture_sources),
-		.input_mux = alc260_fujitsu_capture_sources,
-	},
-	[ALC260_ACER] = {
-		.mixers = { alc260_acer_mixer },
-		.init_verbs = { alc260_acer_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
-		.dac_nids = alc260_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
-		.adc_nids = alc260_dual_adc_nids,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
-		.input_mux = alc260_acer_capture_sources,
-	},
-	[ALC260_FAVORIT100] = {
-		.mixers = { alc260_favorit100_mixer },
-		.init_verbs = { alc260_favorit100_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
-		.dac_nids = alc260_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
-		.adc_nids = alc260_dual_adc_nids,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
-		.input_mux = alc260_favorit100_capture_sources,
-	},
-	[ALC260_WILL] = {
-		.mixers = { alc260_will_mixer },
-		.init_verbs = { alc260_init_verbs, alc260_will_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
-		.dac_nids = alc260_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
-		.adc_nids = alc260_adc_nids,
-		.dig_out_nid = ALC260_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.input_mux = &alc260_capture_source,
-	},
-	[ALC260_REPLACER_672V] = {
-		.mixers = { alc260_replacer_672v_mixer },
-		.init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
-		.dac_nids = alc260_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
-		.adc_nids = alc260_adc_nids,
-		.dig_out_nid = ALC260_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.input_mux = &alc260_capture_source,
-		.unsol_event = alc260_replacer_672v_unsol_event,
-		.init_hook = alc260_replacer_672v_automute,
-	},
-#ifdef CONFIG_SND_DEBUG
-	[ALC260_TEST] = {
-		.mixers = { alc260_test_mixer },
-		.init_verbs = { alc260_test_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
-		.dac_nids = alc260_test_dac_nids,
-		.num_adc_nids = ARRAY_SIZE(alc260_test_adc_nids),
-		.adc_nids = alc260_test_adc_nids,
-		.num_channel_mode = ARRAY_SIZE(alc260_modes),
-		.channel_mode = alc260_modes,
-		.num_mux_defs = ARRAY_SIZE(alc260_test_capture_sources),
-		.input_mux = alc260_test_capture_sources,
-	},
-#endif
-};
-

sound/pci/hda/alc880_quirks.c

@@ -1,1707 +0,0 @@
-/*
- * ALC880 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC880 board config type */
-enum {
-	ALC880_AUTO,
-	ALC880_3ST,
-	ALC880_3ST_DIG,
-	ALC880_5ST,
-	ALC880_5ST_DIG,
-	ALC880_W810,
-	ALC880_Z71V,
-	ALC880_6ST,
-	ALC880_6ST_DIG,
-	ALC880_F1734,
-	ALC880_ASUS,
-	ALC880_ASUS_DIG,
-	ALC880_ASUS_W1V,
-	ALC880_ASUS_DIG2,
-	ALC880_FUJITSU,
-	ALC880_UNIWILL_DIG,
-	ALC880_UNIWILL,
-	ALC880_UNIWILL_P53,
-	ALC880_CLEVO,
-	ALC880_TCL_S700,
-	ALC880_LG,
-#ifdef CONFIG_SND_DEBUG
-	ALC880_TEST,
-#endif
-	ALC880_MODEL_LAST /* last tag */
-};
-
-/*
- * ALC880 3-stack model
- *
- * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0e)
- * Pin assignment: Front = 0x14, Line-In/Surr = 0x1a, Mic/CLFE = 0x18,
- *                 F-Mic = 0x1b, HP = 0x19
- */
-
-static const hda_nid_t alc880_dac_nids[4] = {
-	/* front, rear, clfe, rear_surr */
-	0x02, 0x05, 0x04, 0x03
-};
-
-static const hda_nid_t alc880_adc_nids[3] = {
-	/* ADC0-2 */
-	0x07, 0x08, 0x09,
-};
-
-/* The datasheet says the node 0x07 is connected from inputs,
- * but it shows zero connection in the real implementation on some devices.
- * Note: this is a 915GAV bug, fixed on 915GLV
- */
-static const hda_nid_t alc880_adc_nids_alt[2] = {
-	/* ADC1-2 */
-	0x08, 0x09,
-};
-
-#define ALC880_DIGOUT_NID	0x06
-#define ALC880_DIGIN_NID	0x0a
-#define ALC880_PIN_CD_NID	0x1c
-
-static const struct hda_input_mux alc880_capture_source = {
-	.num_items = 4,
-	.items = {
-		{ "Mic", 0x0 },
-		{ "Front Mic", 0x3 },
-		{ "Line", 0x2 },
-		{ "CD", 0x4 },
-	},
-};
-
-/* channel source setting (2/6 channel selection for 3-stack) */
-/* 2ch mode */
-static const struct hda_verb alc880_threestack_ch2_init[] = {
-	/* set line-in to input, mute it */
-	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
-	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
-	/* set mic-in to input vref 80%, mute it */
-	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
-	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
-	{ } /* end */
-};
-
-/* 6ch mode */
-static const struct hda_verb alc880_threestack_ch6_init[] = {
-	/* set line-in to output, unmute it */
-	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
-	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
-	/* set mic-in to output, unmute it */
-	{ 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
-	{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
-	{ } /* end */
-};
-
-static const struct hda_channel_mode alc880_threestack_modes[2] = {
-	{ 2, alc880_threestack_ch2_init },
-	{ 6, alc880_threestack_ch6_init },
-};
-
-static const struct snd_kcontrol_new alc880_three_stack_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x0f, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x3, HDA_INPUT),
-	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x3, HDA_INPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x19, 0x0, HDA_OUTPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Channel Mode",
-		.info = alc_ch_mode_info,
-		.get = alc_ch_mode_get,
-		.put = alc_ch_mode_put,
-	},
-	{ } /* end */
-};
-
-/*
- * ALC880 5-stack model
- *
- * DAC: Front = 0x02 (0x0c), Surr = 0x05 (0x0f), CLFE = 0x04 (0x0d),
- *      Side = 0x02 (0xd)
- * Pin assignment: Front = 0x14, Surr = 0x17, CLFE = 0x16
- *                 Line-In/Side = 0x1a, Mic = 0x18, F-Mic = 0x1b, HP = 0x19
- */
-
-/* additional mixers to alc880_three_stack_mixer */
-static const struct snd_kcontrol_new alc880_five_stack_mixer[] = {
-	HDA_CODEC_VOLUME("Side Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Side Playback Switch", 0x0d, 2, HDA_INPUT),
-	{ } /* end */
-};
-
-/* channel source setting (6/8 channel selection for 5-stack) */
-/* 6ch mode */
-static const struct hda_verb alc880_fivestack_ch6_init[] = {
-	/* set line-in to input, mute it */
-	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
-	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
-	{ } /* end */
-};
-
-/* 8ch mode */
-static const struct hda_verb alc880_fivestack_ch8_init[] = {
-	/* set line-in to output, unmute it */
-	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
-	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
-	{ } /* end */
-};
-
-static const struct hda_channel_mode alc880_fivestack_modes[2] = {
-	{ 6, alc880_fivestack_ch6_init },
-	{ 8, alc880_fivestack_ch8_init },
-};
-
-
-/*
- * ALC880 6-stack model
- *
- * DAC: Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e),
- *      Side = 0x05 (0x0f)
- * Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, Side = 0x17,
- *   Mic = 0x18, F-Mic = 0x19, Line = 0x1a, HP = 0x1b
- */
-
-static const hda_nid_t alc880_6st_dac_nids[4] = {
-	/* front, rear, clfe, rear_surr */
-	0x02, 0x03, 0x04, 0x05
-};
-
-static const struct hda_input_mux alc880_6stack_capture_source = {
-	.num_items = 4,
-	.items = {
-		{ "Mic", 0x0 },
-		{ "Front Mic", 0x1 },
-		{ "Line", 0x2 },
-		{ "CD", 0x4 },
-	},
-};
-
-/* fixed 8-channels */
-static const struct hda_channel_mode alc880_sixstack_modes[1] = {
-	{ 8, NULL },
-};
-
-static const struct snd_kcontrol_new alc880_six_stack_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Channel Mode",
-		.info = alc_ch_mode_info,
-		.get = alc_ch_mode_get,
-		.put = alc_ch_mode_put,
-	},
-	{ } /* end */
-};
-
-
-/*
- * ALC880 W810 model
- *
- * W810 has rear IO for:
- * Front (DAC 02)
- * Surround (DAC 03)
- * Center/LFE (DAC 04)
- * Digital out (06)
- *
- * The system also has a pair of internal speakers, and a headphone jack.
- * These are both connected to Line2 on the codec, hence to DAC 02.
- *
- * There is a variable resistor to control the speaker or headphone
- * volume. This is a hardware-only device without a software API.
- *
- * Plugging headphones in will disable the internal speakers. This is
- * implemented in hardware, not via the driver using jack sense. In
- * a similar fashion, plugging into the rear socket marked "front" will
- * disable both the speakers and headphones.
- *
- * For input, there's a microphone jack, and an "audio in" jack.
- * These may not do anything useful with this driver yet, because I
- * haven't setup any initialization verbs for these yet...
- */
-
-static const hda_nid_t alc880_w810_dac_nids[3] = {
-	/* front, rear/surround, clfe */
-	0x02, 0x03, 0x04
-};
-
-/* fixed 6 channels */
-static const struct hda_channel_mode alc880_w810_modes[1] = {
-	{ 6, NULL }
-};
-
-/* Pin assignment: Front = 0x14, Surr = 0x15, CLFE = 0x16, HP = 0x1b */
-static const struct snd_kcontrol_new alc880_w810_base_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-	{ } /* end */
-};
-
-
-/*
- * Z710V model
- *
- * DAC: Front = 0x02 (0x0c), HP = 0x03 (0x0d)
- * Pin assignment: Front = 0x14, HP = 0x15, Mic = 0x18, Mic2 = 0x19(?),
- *                 Line = 0x1a
- */
-
-static const hda_nid_t alc880_z71v_dac_nids[1] = {
-	0x02
-};
-#define ALC880_Z71V_HP_DAC	0x03
-
-/* fixed 2 channels */
-static const struct hda_channel_mode alc880_2_jack_modes[1] = {
-	{ 2, NULL }
-};
-
-static const struct snd_kcontrol_new alc880_z71v_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	{ } /* end */
-};
-
-
-/*
- * ALC880 F1734 model
- *
- * DAC: HP = 0x02 (0x0c), Front = 0x03 (0x0d)
- * Pin assignment: HP = 0x14, Front = 0x15, Mic = 0x18
- */
-
-static const hda_nid_t alc880_f1734_dac_nids[1] = {
-	0x03
-};
-#define ALC880_F1734_HP_DAC	0x02
-
-static const struct snd_kcontrol_new alc880_f1734_mixer[] = {
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	{ } /* end */
-};
-
-static const struct hda_input_mux alc880_f1734_capture_source = {
-	.num_items = 2,
-	.items = {
-		{ "Mic", 0x1 },
-		{ "CD", 0x4 },
-	},
-};
-
-
-/*
- * ALC880 ASUS model
- *
- * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e)
- * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16,
- *  Mic = 0x18, Line = 0x1a
- */
-
-#define alc880_asus_dac_nids	alc880_w810_dac_nids	/* identical with w810 */
-#define alc880_asus_modes	alc880_threestack_modes	/* 2/6 channel mode */
-
-static const struct snd_kcontrol_new alc880_asus_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Channel Mode",
-		.info = alc_ch_mode_info,
-		.get = alc_ch_mode_get,
-		.put = alc_ch_mode_put,
-	},
-	{ } /* end */
-};
-
-/*
- * ALC880 ASUS W1V model
- *
- * DAC: HP/Front = 0x02 (0x0c), Surr = 0x03 (0x0d), CLFE = 0x04 (0x0e)
- * Pin assignment: HP/Front = 0x14, Surr = 0x15, CLFE = 0x16,
- *  Mic = 0x18, Line = 0x1a, Line2 = 0x1b
- */
-
-/* additional mixers to alc880_asus_mixer */
-static const struct snd_kcontrol_new alc880_asus_w1v_mixer[] = {
-	HDA_CODEC_VOLUME("Line2 Playback Volume", 0x0b, 0x03, HDA_INPUT),
-	HDA_CODEC_MUTE("Line2 Playback Switch", 0x0b, 0x03, HDA_INPUT),
-	{ } /* end */
-};
-
-/* TCL S700 */
-static const struct snd_kcontrol_new alc880_tcl_s700_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Front Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0B, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0B, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0B, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0B, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
-	{ } /* end */
-};
-
-/* Uniwill */
-static const struct snd_kcontrol_new alc880_uniwill_mixer[] = {
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Channel Mode",
-		.info = alc_ch_mode_info,
-		.get = alc_ch_mode_get,
-		.put = alc_ch_mode_put,
-	},
-	{ } /* end */
-};
-
-static const struct snd_kcontrol_new alc880_fujitsu_mixer[] = {
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	{ } /* end */
-};
-
-static const struct snd_kcontrol_new alc880_uniwill_p53_mixer[] = {
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Headphone Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Speaker Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	{ } /* end */
-};
-
-/*
- * initialize the codec volumes, etc
- */
-
-/*
- * generic initialization of ADC, input mixers and output mixers
- */
-static const struct hda_verb alc880_volume_init_verbs[] = {
-	/*
-	 * Unmute ADC0-2 and set the default input to mic-in
-	 */
-	{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-
-	/* Unmute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
-	 * mixer widget
-	 * Note: PASD motherboards uses the Line In 2 as the input for front
-	 * panel mic (mic 2)
-	 */
-	/* Amp Indices: Mic1 = 0, Mic2 = 1, Line1 = 2, Line2 = 3, CD = 4 */
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)},
-
-	/*
-	 * Set up output mixers (0x0c - 0x0f)
-	 */
-	/* set vol=0 to output mixers */
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	/* set up input amps for analog loopback */
-	/* Amp Indices: DAC = 0, mixer = 1 */
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
-	{ }
-};
-
-/*
- * 3-stack pin configuration:
- * front = 0x14, mic/clfe = 0x18, HP = 0x19, line/surr = 0x1a, f-mic = 0x1b
- */
-static const struct hda_verb alc880_pin_3stack_init_verbs[] = {
-	/*
-	 * preset connection lists of input pins
-	 * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround
-	 */
-	{0x10, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */
-	{0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
-	{0x12, AC_VERB_SET_CONNECT_SEL, 0x03}, /* line/surround */
-
-	/*
-	 * Set pin mode and muting
-	 */
-	/* set front pin widgets 0x14 for output */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Mic1 (rear panel) pin widget for input and vref at 80% */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Mic2 (as headphone out) for HP output */
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Line In pin widget for input */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Line2 (as front mic) pin widget for input and vref at 80% */
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* CD pin widget for input */
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
-	{ }
-};
-
-/*
- * 5-stack pin configuration:
- * front = 0x14, surround = 0x17, clfe = 0x16, mic = 0x18, HP = 0x19,
- * line-in/side = 0x1a, f-mic = 0x1b
- */
-static const struct hda_verb alc880_pin_5stack_init_verbs[] = {
-	/*
-	 * preset connection lists of input pins
-	 * 0 = front, 1 = rear_surr, 2 = CLFE, 3 = surround
-	 */
-	{0x11, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
-	{0x12, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/side */
-
-	/*
-	 * Set pin mode and muting
-	 */
-	/* set pin widgets 0x14-0x17 for output */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	/* unmute pins for output (no gain on this amp) */
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
-	/* Mic1 (rear panel) pin widget for input and vref at 80% */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Mic2 (as headphone out) for HP output */
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Line In pin widget for input */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Line2 (as front mic) pin widget for input and vref at 80% */
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* CD pin widget for input */
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
-	{ }
-};
-
-/*
- * W810 pin configuration:
- * front = 0x14, surround = 0x15, clfe = 0x16, HP = 0x1b
- */
-static const struct hda_verb alc880_pin_w810_init_verbs[] = {
-	/* hphone/speaker input selector: front DAC */
-	{0x13, AC_VERB_SET_CONNECT_SEL, 0x0},
-
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
-	{ }
-};
-
-/*
- * Z71V pin configuration:
- * Speaker-out = 0x14, HP = 0x15, Mic = 0x18, Line-in = 0x1a, Mic2 = 0x1b (?)
- */
-static const struct hda_verb alc880_pin_z71v_init_verbs[] = {
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
-	{ }
-};
-
-/*
- * 6-stack pin configuration:
- * front = 0x14, surr = 0x15, clfe = 0x16, side = 0x17, mic = 0x18,
- * f-mic = 0x19, line = 0x1a, HP = 0x1b
- */
-static const struct hda_verb alc880_pin_6stack_init_verbs[] = {
-	{0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
-
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
-	{ }
-};
-
-/*
- * Uniwill pin configuration:
- * HP = 0x14, InternalSpeaker = 0x15, mic = 0x18, internal mic = 0x19,
- * line = 0x1a
- */
-static const struct hda_verb alc880_uniwill_init_verbs[] = {
-	{0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
-
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
-
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, */
-	/* {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, */
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
-	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_MIC_EVENT},
-
-	{ }
-};
-
-/*
-* Uniwill P53
-* HP = 0x14, InternalSpeaker = 0x15, mic = 0x19,
- */
-static const struct hda_verb alc880_uniwill_p53_init_verbs[] = {
-	{0x13, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */
-
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x00 << 8))},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8))},
-
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
-	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_DCVOL_EVENT},
-
-	{ }
-};
-
-static const struct hda_verb alc880_beep_init_verbs[] = {
-	{ 0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5) },
-	{ }
-};
-
-static void alc880_uniwill_setup(struct hda_codec *codec)
-{
-	struct alc_spec *spec = codec->spec;
-
-	spec->autocfg.hp_pins[0] = 0x14;
-	spec->autocfg.speaker_pins[0] = 0x15;
-	spec->autocfg.speaker_pins[0] = 0x16;
-	alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
-}
-
-static void alc880_uniwill_init_hook(struct hda_codec *codec)
-{
-	alc_hp_automute(codec);
-	alc88x_simple_mic_automute(codec);
-}
-
-static void alc880_uniwill_unsol_event(struct hda_codec *codec,
-				       unsigned int res)
-{
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 28 bit!
-	 */
-	res >>= 28;
-	switch (res) {
-	case ALC_MIC_EVENT:
-		alc88x_simple_mic_automute(codec);
-		break;
-	default:
-		alc_exec_unsol_event(codec, res);
-		break;
-	}
-}
-
-static void alc880_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	alc_exec_unsol_event(codec, res >> 28);
-}
-
-static void alc880_uniwill_p53_setup(struct hda_codec *codec)
-{
-	struct alc_spec *spec = codec->spec;
-
-	spec->autocfg.hp_pins[0] = 0x14;
-	spec->autocfg.speaker_pins[0] = 0x15;
-	alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
-}
-
-static void alc880_uniwill_p53_dcvol_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-
-	present = snd_hda_codec_read(codec, 0x21, 0,
-				     AC_VERB_GET_VOLUME_KNOB_CONTROL, 0);
-	present &= HDA_AMP_VOLMASK;
-	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_OUTPUT, 0,
-				 HDA_AMP_VOLMASK, present);
-	snd_hda_codec_amp_stereo(codec, 0x0d, HDA_OUTPUT, 0,
-				 HDA_AMP_VOLMASK, present);
-}
-
-static void alc880_uniwill_p53_unsol_event(struct hda_codec *codec,
-					   unsigned int res)
-{
-	/* Looks like the unsol event is incompatible with the standard
-	 * definition.  4bit tag is placed at 28 bit!
-	 */
-	res >>= 28;
-	if (res == ALC_DCVOL_EVENT)
-		alc880_uniwill_p53_dcvol_automute(codec);
-	else
-		alc_exec_unsol_event(codec, res);
-}
-
-/*
- * F1734 pin configuration:
- * HP = 0x14, speaker-out = 0x15, mic = 0x18
- */
-static const struct hda_verb alc880_pin_f1734_init_verbs[] = {
-	{0x07, AC_VERB_SET_CONNECT_SEL, 0x01},
-	{0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
-	{0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
-	{0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
-	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC_HP_EVENT},
-	{0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC_DCVOL_EVENT},
-
-	{ }
-};
-
-/*
- * ASUS pin configuration:
- * HP/front = 0x14, surr = 0x15, clfe = 0x16, mic = 0x18, line = 0x1a
- */
-static const struct hda_verb alc880_pin_asus_init_verbs[] = {
-	{0x10, AC_VERB_SET_CONNECT_SEL, 0x02},
-	{0x11, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x12, AC_VERB_SET_CONNECT_SEL, 0x01},
-	{0x13, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
-	{ }
-};
-
-/* Enable GPIO mask and set output */
-#define alc880_gpio1_init_verbs	alc_gpio1_init_verbs
-#define alc880_gpio2_init_verbs	alc_gpio2_init_verbs
-#define alc880_gpio3_init_verbs	alc_gpio3_init_verbs
-
-/* Clevo m520g init */
-static const struct hda_verb alc880_pin_clevo_init_verbs[] = {
-	/* headphone output */
-	{0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
-	/* line-out */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Line-in */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* CD */
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Mic1 (rear panel) */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Mic2 (front panel) */
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* headphone */
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-        /* change to EAPD mode */
-	{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
-	{0x20, AC_VERB_SET_PROC_COEF,  0x3060},
-
-	{ }
-};
-
-static const struct hda_verb alc880_pin_tcl_S700_init_verbs[] = {
-	/* change to EAPD mode */
-	{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
-	{0x20, AC_VERB_SET_PROC_COEF,  0x3060},
-
-	/* Headphone output */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	/* Front output*/
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	/* Line In pin widget for input */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	/* CD pin widget for input */
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	/* Mic1 (rear panel) pin widget for input and vref at 80% */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-
-	/* change to EAPD mode */
-	{0x20, AC_VERB_SET_COEF_INDEX, 0x07},
-	{0x20, AC_VERB_SET_PROC_COEF,  0x3070},
-
-	{ }
-};
-
-/*
- * LG m1 express dual
- *
- * Pin assignment:
- *   Rear Line-In/Out (blue): 0x14
- *   Build-in Mic-In: 0x15
- *   Speaker-out: 0x17
- *   HP-Out (green): 0x1b
- *   Mic-In/Out (red): 0x19
- *   SPDIF-Out: 0x1e
- */
-
-/* To make 5.1 output working (green=Front, blue=Surr, red=CLFE) */
-static const hda_nid_t alc880_lg_dac_nids[3] = {
-	0x05, 0x02, 0x03
-};
-
-/* seems analog CD is not working */
-static const struct hda_input_mux alc880_lg_capture_source = {
-	.num_items = 3,
-	.items = {
-		{ "Mic", 0x1 },
-		{ "Line", 0x5 },
-		{ "Internal Mic", 0x6 },
-	},
-};
-
-/* 2,4,6 channel modes */
-static const struct hda_verb alc880_lg_ch2_init[] = {
-	/* set line-in and mic-in to input */
-	{ 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
-	{ 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
-	{ }
-};
-
-static const struct hda_verb alc880_lg_ch4_init[] = {
-	/* set line-in to out and mic-in to input */
-	{ 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
-	{ 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
-	{ }
-};
-
-static const struct hda_verb alc880_lg_ch6_init[] = {
-	/* set line-in and mic-in to output */
-	{ 0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
-	{ 0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP },
-	{ }
-};
-
-static const struct hda_channel_mode alc880_lg_ch_modes[3] = {
-	{ 2, alc880_lg_ch2_init },
-	{ 4, alc880_lg_ch4_init },
-	{ 6, alc880_lg_ch6_init },
-};
-
-static const struct snd_kcontrol_new alc880_lg_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x0f, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0d, 1, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0d, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0d, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0d, 2, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x06, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x06, HDA_INPUT),
-	HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x07, HDA_INPUT),
-	HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x07, HDA_INPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Channel Mode",
-		.info = alc_ch_mode_info,
-		.get = alc_ch_mode_get,
-		.put = alc_ch_mode_put,
-	},
-	{ } /* end */
-};
-
-static const struct hda_verb alc880_lg_init_verbs[] = {
-	/* set capture source to mic-in */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	/* mute all amp mixer inputs */
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(5)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)},
-	/* line-in to input */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* built-in mic */
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* speaker-out */
-	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* mic-in to input */
-	{0x11, AC_VERB_SET_CONNECT_SEL, 0x01},
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* HP-out */
-	{0x13, AC_VERB_SET_CONNECT_SEL, 0x03},
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* jack sense */
-	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC_HP_EVENT},
-	{ }
-};
-
-/* toggle speaker-output according to the hp-jack state */
-static void alc880_lg_setup(struct hda_codec *codec)
-{
-	struct alc_spec *spec = codec->spec;
-
-	spec->autocfg.hp_pins[0] = 0x1b;
-	spec->autocfg.speaker_pins[0] = 0x17;
-	alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
-}
-
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-static const struct hda_amp_list alc880_lg_loopbacks[] = {
-	{ 0x0b, HDA_INPUT, 1 },
-	{ 0x0b, HDA_INPUT, 6 },
-	{ 0x0b, HDA_INPUT, 7 },
-	{ } /* end */
-};
-#endif
-
-/*
- * Test configuration for debugging
- *
- * Almost all inputs/outputs are enabled.  I/O pins can be configured via
- * enum controls.
- */
-#ifdef CONFIG_SND_DEBUG
-static const hda_nid_t alc880_test_dac_nids[4] = {
-	0x02, 0x03, 0x04, 0x05
-};
-
-static const struct hda_input_mux alc880_test_capture_source = {
-	.num_items = 7,
-	.items = {
-		{ "In-1", 0x0 },
-		{ "In-2", 0x1 },
-		{ "In-3", 0x2 },
-		{ "In-4", 0x3 },
-		{ "CD", 0x4 },
-		{ "Front", 0x5 },
-		{ "Surround", 0x6 },
-	},
-};
-
-static const struct hda_channel_mode alc880_test_modes[4] = {
-	{ 2, NULL },
-	{ 4, NULL },
-	{ 6, NULL },
-	{ 8, NULL },
-};
-
-static int alc_test_pin_ctl_info(struct snd_kcontrol *kcontrol,
-				 struct snd_ctl_elem_info *uinfo)
-{
-	static const char * const texts[] = {
-		"N/A", "Line Out", "HP Out",
-		"In Hi-Z", "In 50%", "In Grd", "In 80%", "In 100%"
-	};
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
-	uinfo->count = 1;
-	uinfo->value.enumerated.items = 8;
-	if (uinfo->value.enumerated.item >= 8)
-		uinfo->value.enumerated.item = 7;
-	strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
-	return 0;
-}
-
-static int alc_test_pin_ctl_get(struct snd_kcontrol *kcontrol,
-				struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
-	unsigned int pin_ctl, item = 0;
-
-	pin_ctl = snd_hda_codec_read(codec, nid, 0,
-				     AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
-	if (pin_ctl & AC_PINCTL_OUT_EN) {
-		if (pin_ctl & AC_PINCTL_HP_EN)
-			item = 2;
-		else
-			item = 1;
-	} else if (pin_ctl & AC_PINCTL_IN_EN) {
-		switch (pin_ctl & AC_PINCTL_VREFEN) {
-		case AC_PINCTL_VREF_HIZ: item = 3; break;
-		case AC_PINCTL_VREF_50:  item = 4; break;
-		case AC_PINCTL_VREF_GRD: item = 5; break;
-		case AC_PINCTL_VREF_80:  item = 6; break;
-		case AC_PINCTL_VREF_100: item = 7; break;
-		}
-	}
-	ucontrol->value.enumerated.item[0] = item;
-	return 0;
-}
-
-static int alc_test_pin_ctl_put(struct snd_kcontrol *kcontrol,
-				struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
-	static const unsigned int ctls[] = {
-		0, AC_PINCTL_OUT_EN, AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN,
-		AC_PINCTL_IN_EN | AC_PINCTL_VREF_HIZ,
-		AC_PINCTL_IN_EN | AC_PINCTL_VREF_50,
-		AC_PINCTL_IN_EN | AC_PINCTL_VREF_GRD,
-		AC_PINCTL_IN_EN | AC_PINCTL_VREF_80,
-		AC_PINCTL_IN_EN | AC_PINCTL_VREF_100,
-	};
-	unsigned int old_ctl, new_ctl;
-
-	old_ctl = snd_hda_codec_read(codec, nid, 0,
-				     AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
-	new_ctl = ctls[ucontrol->value.enumerated.item[0]];
-	if (old_ctl != new_ctl) {
-		int val;
-		snd_hda_codec_write_cache(codec, nid, 0,
-					  AC_VERB_SET_PIN_WIDGET_CONTROL,
-					  new_ctl);
-		val = ucontrol->value.enumerated.item[0] >= 3 ?
-			HDA_AMP_MUTE : 0;
-		snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
-					 HDA_AMP_MUTE, val);
-		return 1;
-	}
-	return 0;
-}
-
-static int alc_test_pin_src_info(struct snd_kcontrol *kcontrol,
-				 struct snd_ctl_elem_info *uinfo)
-{
-	static const char * const texts[] = {
-		"Front", "Surround", "CLFE", "Side"
-	};
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
-	uinfo->count = 1;
-	uinfo->value.enumerated.items = 4;
-	if (uinfo->value.enumerated.item >= 4)
-		uinfo->value.enumerated.item = 3;
-	strcpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item]);
-	return 0;
-}
-
-static int alc_test_pin_src_get(struct snd_kcontrol *kcontrol,
-				struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
-	unsigned int sel;
-
-	sel = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_SEL, 0);
-	ucontrol->value.enumerated.item[0] = sel & 3;
-	return 0;
-}
-
-static int alc_test_pin_src_put(struct snd_kcontrol *kcontrol,
-				struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = (hda_nid_t)kcontrol->private_value;
-	unsigned int sel;
-
-	sel = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONNECT_SEL, 0) & 3;
-	if (ucontrol->value.enumerated.item[0] != sel) {
-		sel = ucontrol->value.enumerated.item[0] & 3;
-		snd_hda_codec_write_cache(codec, nid, 0,
-					  AC_VERB_SET_CONNECT_SEL, sel);
-		return 1;
-	}
-	return 0;
-}
-
-#define PIN_CTL_TEST(xname,nid) {			\
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	\
-			.name = xname,		       \
-			.subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-			.info = alc_test_pin_ctl_info, \
-			.get = alc_test_pin_ctl_get,   \
-			.put = alc_test_pin_ctl_put,   \
-			.private_value = nid	       \
-			}
-
-#define PIN_SRC_TEST(xname,nid) {			\
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,	\
-			.name = xname,		       \
-			.subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-			.info = alc_test_pin_src_info, \
-			.get = alc_test_pin_src_get,   \
-			.put = alc_test_pin_src_put,   \
-			.private_value = nid	       \
-			}
-
-static const struct snd_kcontrol_new alc880_test_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("CLFE Playback Volume", 0x0e, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_BIND_MUTE("CLFE Playback Switch", 0x0e, 2, HDA_INPUT),
-	HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
-	PIN_CTL_TEST("Front Pin Mode", 0x14),
-	PIN_CTL_TEST("Surround Pin Mode", 0x15),
-	PIN_CTL_TEST("CLFE Pin Mode", 0x16),
-	PIN_CTL_TEST("Side Pin Mode", 0x17),
-	PIN_CTL_TEST("In-1 Pin Mode", 0x18),
-	PIN_CTL_TEST("In-2 Pin Mode", 0x19),
-	PIN_CTL_TEST("In-3 Pin Mode", 0x1a),
-	PIN_CTL_TEST("In-4 Pin Mode", 0x1b),
-	PIN_SRC_TEST("In-1 Pin Source", 0x18),
-	PIN_SRC_TEST("In-2 Pin Source", 0x19),
-	PIN_SRC_TEST("In-3 Pin Source", 0x1a),
-	PIN_SRC_TEST("In-4 Pin Source", 0x1b),
-	HDA_CODEC_VOLUME("In-1 Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("In-1 Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("In-2 Playback Volume", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("In-2 Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("In-3 Playback Volume", 0x0b, 0x2, HDA_INPUT),
-	HDA_CODEC_MUTE("In-3 Playback Switch", 0x0b, 0x2, HDA_INPUT),
-	HDA_CODEC_VOLUME("In-4 Playback Volume", 0x0b, 0x3, HDA_INPUT),
-	HDA_CODEC_MUTE("In-4 Playback Switch", 0x0b, 0x3, HDA_INPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x4, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x4, HDA_INPUT),
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Channel Mode",
-		.info = alc_ch_mode_info,
-		.get = alc_ch_mode_get,
-		.put = alc_ch_mode_put,
-	},
-	{ } /* end */
-};
-
-static const struct hda_verb alc880_test_init_verbs[] = {
-	/* Unmute inputs of 0x0c - 0x0f */
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	/* Vol output for 0x0c-0x0f */
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	/* Set output pins 0x14-0x17 */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	/* Unmute output pins 0x14-0x17 */
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Set input pins 0x18-0x1c */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	/* Mute input pins 0x18-0x1b */
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* ADC set up */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* Analog input/passthru */
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	{ }
-};
-#endif
-
-/*
- */
-
-static const char * const alc880_models[ALC880_MODEL_LAST] = {
-	[ALC880_3ST]		= "3stack",
-	[ALC880_TCL_S700]	= "tcl",
-	[ALC880_3ST_DIG]	= "3stack-digout",
-	[ALC880_CLEVO]		= "clevo",
-	[ALC880_5ST]		= "5stack",
-	[ALC880_5ST_DIG]	= "5stack-digout",
-	[ALC880_W810]		= "w810",
-	[ALC880_Z71V]		= "z71v",
-	[ALC880_6ST]		= "6stack",
-	[ALC880_6ST_DIG]	= "6stack-digout",
-	[ALC880_ASUS]		= "asus",
-	[ALC880_ASUS_W1V]	= "asus-w1v",
-	[ALC880_ASUS_DIG]	= "asus-dig",
-	[ALC880_ASUS_DIG2]	= "asus-dig2",
-	[ALC880_UNIWILL_DIG]	= "uniwill",
-	[ALC880_UNIWILL_P53]	= "uniwill-p53",
-	[ALC880_FUJITSU]	= "fujitsu",
-	[ALC880_F1734]		= "F1734",
-	[ALC880_LG]		= "lg",
-#ifdef CONFIG_SND_DEBUG
-	[ALC880_TEST]		= "test",
-#endif
-	[ALC880_AUTO]		= "auto",
-};
-
-static const struct snd_pci_quirk alc880_cfg_tbl[] = {
-	SND_PCI_QUIRK(0x1019, 0x0f69, "Coeus G610P", ALC880_W810),
-	SND_PCI_QUIRK(0x1019, 0xa880, "ECS", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x1019, 0xa884, "Acer APFV", ALC880_6ST),
-	SND_PCI_QUIRK(0x1025, 0x0070, "ULI", ALC880_3ST_DIG),
-	SND_PCI_QUIRK(0x1025, 0x0077, "ULI", ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x1025, 0x0078, "ULI", ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x1025, 0x0087, "ULI", ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x1025, 0xe309, "ULI", ALC880_3ST_DIG),
-	SND_PCI_QUIRK(0x1025, 0xe310, "ULI", ALC880_3ST),
-	SND_PCI_QUIRK(0x1039, 0x1234, NULL, ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x1043, 0x10b3, "ASUS W1V", ALC880_ASUS_W1V),
-	SND_PCI_QUIRK(0x1043, 0x10c2, "ASUS W6A", ALC880_ASUS_DIG),
-	SND_PCI_QUIRK(0x1043, 0x10c3, "ASUS Wxx", ALC880_ASUS_DIG),
-	SND_PCI_QUIRK(0x1043, 0x1113, "ASUS", ALC880_ASUS_DIG),
-	SND_PCI_QUIRK(0x1043, 0x1123, "ASUS", ALC880_ASUS_DIG),
-	SND_PCI_QUIRK(0x1043, 0x1173, "ASUS", ALC880_ASUS_DIG),
-	SND_PCI_QUIRK(0x1043, 0x1964, "ASUS Z71V", ALC880_Z71V),
-	/* SND_PCI_QUIRK(0x1043, 0x1964, "ASUS", ALC880_ASUS_DIG), */
-	SND_PCI_QUIRK(0x1043, 0x1973, "ASUS", ALC880_ASUS_DIG),
-	SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS", ALC880_ASUS_DIG),
-	SND_PCI_QUIRK(0x1043, 0x814e, "ASUS P5GD1 w/SPDIF", ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x1043, 0x8181, "ASUS P4GPL", ALC880_ASUS_DIG),
-	SND_PCI_QUIRK(0x1043, 0x8196, "ASUS P5GD1", ALC880_6ST),
-	SND_PCI_QUIRK(0x1043, 0x81b4, "ASUS", ALC880_6ST),
-	SND_PCI_QUIRK_VENDOR(0x1043, "ASUS", ALC880_ASUS), /* default ASUS */
-	SND_PCI_QUIRK(0x104d, 0x81a0, "Sony", ALC880_3ST),
-	SND_PCI_QUIRK(0x104d, 0x81d6, "Sony", ALC880_3ST),
-	SND_PCI_QUIRK(0x107b, 0x3032, "Gateway", ALC880_5ST),
-	SND_PCI_QUIRK(0x107b, 0x3033, "Gateway", ALC880_5ST),
-	SND_PCI_QUIRK(0x107b, 0x4039, "Gateway", ALC880_5ST),
-	SND_PCI_QUIRK(0x1297, 0xc790, "Shuttle ST20G5", ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x1458, 0xa102, "Gigabyte K8", ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x1462, 0x1150, "MSI", ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x1509, 0x925d, "FIC P4M", ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x1558, 0x0520, "Clevo m520G", ALC880_CLEVO),
-	SND_PCI_QUIRK(0x1558, 0x0660, "Clevo m655n", ALC880_CLEVO),
-	SND_PCI_QUIRK(0x1558, 0x5401, "ASUS", ALC880_ASUS_DIG2),
-	SND_PCI_QUIRK(0x1565, 0x8202, "Biostar", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x1584, 0x9050, "Uniwill", ALC880_UNIWILL_DIG),
-	SND_PCI_QUIRK(0x1584, 0x9054, "Uniwill", ALC880_F1734),
-	SND_PCI_QUIRK(0x1584, 0x9070, "Uniwill", ALC880_UNIWILL),
-	SND_PCI_QUIRK(0x1584, 0x9077, "Uniwill P53", ALC880_UNIWILL_P53),
-	SND_PCI_QUIRK(0x161f, 0x203d, "W810", ALC880_W810),
-	SND_PCI_QUIRK(0x1695, 0x400d, "EPoX", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x1695, 0x4012, "EPox EP-5LDA", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x1734, 0x107c, "FSC F1734", ALC880_F1734),
-	SND_PCI_QUIRK(0x1734, 0x1094, "FSC Amilo M1451G", ALC880_FUJITSU),
-	SND_PCI_QUIRK(0x1734, 0x10ac, "FSC AMILO Xi 1526", ALC880_F1734),
-	SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU),
-	SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG),
-	SND_PCI_QUIRK(0x1854, 0x005f, "LG P1 Express", ALC880_LG),
-	SND_PCI_QUIRK(0x1854, 0x0068, "LG w1", ALC880_LG),
-	SND_PCI_QUIRK(0x19db, 0x4188, "TCL S700", ALC880_TCL_S700),
-	SND_PCI_QUIRK(0x2668, 0x8086, NULL, ALC880_6ST_DIG), /* broken BIOS */
-	SND_PCI_QUIRK(0x8086, 0x2668, NULL, ALC880_6ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xa100, "Intel mobo", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xd400, "Intel mobo", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xd401, "Intel mobo", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xd402, "Intel mobo", ALC880_3ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xe224, "Intel mobo", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xe305, "Intel mobo", ALC880_3ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xe308, "Intel mobo", ALC880_3ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xe400, "Intel mobo", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xe401, "Intel mobo", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0x8086, 0xe402, "Intel mobo", ALC880_5ST_DIG),
-	/* default Intel */
-	SND_PCI_QUIRK_VENDOR(0x8086, "Intel mobo", ALC880_3ST),
-	SND_PCI_QUIRK(0xa0a0, 0x0560, "AOpen i915GMm-HFS", ALC880_5ST_DIG),
-	SND_PCI_QUIRK(0xe803, 0x1019, NULL, ALC880_6ST_DIG),
-	{}
-};
-
-/*
- * ALC880 codec presets
- */
-static const struct alc_config_preset alc880_presets[] = {
-	[ALC880_3ST] = {
-		.mixers = { alc880_three_stack_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_3stack_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_dac_nids),
-		.dac_nids = alc880_dac_nids,
-		.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
-		.channel_mode = alc880_threestack_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_3ST_DIG] = {
-		.mixers = { alc880_three_stack_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_3stack_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_dac_nids),
-		.dac_nids = alc880_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
-		.channel_mode = alc880_threestack_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_TCL_S700] = {
-		.mixers = { alc880_tcl_s700_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_tcl_S700_init_verbs,
-				alc880_gpio2_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_dac_nids),
-		.dac_nids = alc880_dac_nids,
-		.adc_nids = alc880_adc_nids_alt, /* FIXME: correct? */
-		.num_adc_nids = 1, /* single ADC */
-		.hp_nid = 0x03,
-		.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
-		.channel_mode = alc880_2_jack_modes,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_5ST] = {
-		.mixers = { alc880_three_stack_mixer,
-			    alc880_five_stack_mixer},
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_5stack_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_dac_nids),
-		.dac_nids = alc880_dac_nids,
-		.num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes),
-		.channel_mode = alc880_fivestack_modes,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_5ST_DIG] = {
-		.mixers = { alc880_three_stack_mixer,
-			    alc880_five_stack_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_5stack_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_dac_nids),
-		.dac_nids = alc880_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_fivestack_modes),
-		.channel_mode = alc880_fivestack_modes,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_6ST] = {
-		.mixers = { alc880_six_stack_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_6stack_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_6st_dac_nids),
-		.dac_nids = alc880_6st_dac_nids,
-		.num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes),
-		.channel_mode = alc880_sixstack_modes,
-		.input_mux = &alc880_6stack_capture_source,
-	},
-	[ALC880_6ST_DIG] = {
-		.mixers = { alc880_six_stack_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_6stack_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_6st_dac_nids),
-		.dac_nids = alc880_6st_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_sixstack_modes),
-		.channel_mode = alc880_sixstack_modes,
-		.input_mux = &alc880_6stack_capture_source,
-	},
-	[ALC880_W810] = {
-		.mixers = { alc880_w810_base_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_w810_init_verbs,
-				alc880_gpio2_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_w810_dac_nids),
-		.dac_nids = alc880_w810_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_w810_modes),
-		.channel_mode = alc880_w810_modes,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_Z71V] = {
-		.mixers = { alc880_z71v_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_z71v_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_z71v_dac_nids),
-		.dac_nids = alc880_z71v_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.hp_nid = 0x03,
-		.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
-		.channel_mode = alc880_2_jack_modes,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_F1734] = {
-		.mixers = { alc880_f1734_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_f1734_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_f1734_dac_nids),
-		.dac_nids = alc880_f1734_dac_nids,
-		.hp_nid = 0x02,
-		.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
-		.channel_mode = alc880_2_jack_modes,
-		.input_mux = &alc880_f1734_capture_source,
-		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.setup = alc880_uniwill_p53_setup,
-		.init_hook = alc_hp_automute,
-	},
-	[ALC880_ASUS] = {
-		.mixers = { alc880_asus_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_asus_init_verbs,
-				alc880_gpio1_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
-		.dac_nids = alc880_asus_dac_nids,
-		.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
-		.channel_mode = alc880_asus_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_ASUS_DIG] = {
-		.mixers = { alc880_asus_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_asus_init_verbs,
-				alc880_gpio1_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
-		.dac_nids = alc880_asus_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
-		.channel_mode = alc880_asus_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_ASUS_DIG2] = {
-		.mixers = { alc880_asus_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_asus_init_verbs,
-				alc880_gpio2_init_verbs }, /* use GPIO2 */
-		.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
-		.dac_nids = alc880_asus_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
-		.channel_mode = alc880_asus_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_ASUS_W1V] = {
-		.mixers = { alc880_asus_mixer, alc880_asus_w1v_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_asus_init_verbs,
-				alc880_gpio1_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
-		.dac_nids = alc880_asus_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
-		.channel_mode = alc880_asus_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_UNIWILL_DIG] = {
-		.mixers = { alc880_asus_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_asus_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
-		.dac_nids = alc880_asus_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_asus_modes),
-		.channel_mode = alc880_asus_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_UNIWILL] = {
-		.mixers = { alc880_uniwill_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_uniwill_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
-		.dac_nids = alc880_asus_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
-		.channel_mode = alc880_threestack_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_capture_source,
-		.unsol_event = alc880_uniwill_unsol_event,
-		.setup = alc880_uniwill_setup,
-		.init_hook = alc880_uniwill_init_hook,
-	},
-	[ALC880_UNIWILL_P53] = {
-		.mixers = { alc880_uniwill_p53_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_uniwill_p53_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_asus_dac_nids),
-		.dac_nids = alc880_asus_dac_nids,
-		.num_channel_mode = ARRAY_SIZE(alc880_w810_modes),
-		.channel_mode = alc880_threestack_modes,
-		.input_mux = &alc880_capture_source,
-		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.setup = alc880_uniwill_p53_setup,
-		.init_hook = alc_hp_automute,
-	},
-	[ALC880_FUJITSU] = {
-		.mixers = { alc880_fujitsu_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_uniwill_p53_init_verbs,
-	       			alc880_beep_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_dac_nids),
-		.dac_nids = alc880_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
-		.channel_mode = alc880_2_jack_modes,
-		.input_mux = &alc880_capture_source,
-		.unsol_event = alc880_uniwill_p53_unsol_event,
-		.setup = alc880_uniwill_p53_setup,
-		.init_hook = alc_hp_automute,
-	},
-	[ALC880_CLEVO] = {
-		.mixers = { alc880_three_stack_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_pin_clevo_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_dac_nids),
-		.dac_nids = alc880_dac_nids,
-		.hp_nid = 0x03,
-		.num_channel_mode = ARRAY_SIZE(alc880_threestack_modes),
-		.channel_mode = alc880_threestack_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_capture_source,
-	},
-	[ALC880_LG] = {
-		.mixers = { alc880_lg_mixer },
-		.init_verbs = { alc880_volume_init_verbs,
-				alc880_lg_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_lg_dac_nids),
-		.dac_nids = alc880_lg_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_lg_ch_modes),
-		.channel_mode = alc880_lg_ch_modes,
-		.need_dac_fix = 1,
-		.input_mux = &alc880_lg_capture_source,
-		.unsol_event = alc880_unsol_event,
-		.setup = alc880_lg_setup,
-		.init_hook = alc_hp_automute,
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-		.loopbacks = alc880_lg_loopbacks,
-#endif
-	},
-#ifdef CONFIG_SND_DEBUG
-	[ALC880_TEST] = {
-		.mixers = { alc880_test_mixer },
-		.init_verbs = { alc880_test_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc880_test_dac_nids),
-		.dac_nids = alc880_test_dac_nids,
-		.dig_out_nid = ALC880_DIGOUT_NID,
-		.num_channel_mode = ARRAY_SIZE(alc880_test_modes),
-		.channel_mode = alc880_test_modes,
-		.input_mux = &alc880_test_capture_source,
-	},
-#endif
-};
-

sound/pci/hda/alc882_quirks.c

@@ -1,866 +0,0 @@
-/*
- * ALC882/ALC883/ALC888/ALC889 quirk models
- * included by patch_realtek.c
- */
-
-/* ALC882 models */
-enum {
-	ALC882_AUTO,
-	ALC885_MBA21,
-	ALC885_MBP3,
-	ALC885_MB5,
-	ALC885_MACMINI3,
-	ALC885_IMAC91,
-	ALC889A_MB31,
-	ALC882_MODEL_LAST,
-};
-
-#define ALC882_DIGOUT_NID	0x06
-#define ALC882_DIGIN_NID	0x0a
-#define ALC883_DIGOUT_NID	ALC882_DIGOUT_NID
-#define ALC883_DIGIN_NID	ALC882_DIGIN_NID
-#define ALC1200_DIGOUT_NID	0x10
-
-
-static const struct hda_channel_mode alc882_ch_modes[1] = {
-	{ 8, NULL }
-};
-
-/* DACs */
-static const hda_nid_t alc882_dac_nids[4] = {
-	/* front, rear, clfe, rear_surr */
-	0x02, 0x03, 0x04, 0x05
-};
-#define alc883_dac_nids		alc882_dac_nids
-
-/* ADCs */
-#define alc882_adc_nids		alc880_adc_nids
-#define alc882_adc_nids_alt	alc880_adc_nids_alt
-#define alc883_adc_nids		alc882_adc_nids_alt
-
-static const hda_nid_t alc882_capsrc_nids_alt[2] = { 0x23, 0x22 };
-#define alc883_capsrc_nids	alc882_capsrc_nids_alt
-
-/* input MUX */
-/* FIXME: should be a matrix-type input source selection */
-
-static const struct hda_input_mux alc882_capture_source = {
-	.num_items = 4,
-	.items = {
-		{ "Mic", 0x0 },
-		{ "Front Mic", 0x1 },
-		{ "Line", 0x2 },
-		{ "CD", 0x4 },
-	},
-};
-
-#define alc883_capture_source	alc882_capture_source
-
-static const struct hda_input_mux mb5_capture_source = {
-	.num_items = 3,
-	.items = {
-		{ "Mic", 0x1 },
-		{ "Line", 0x7 },
-		{ "CD", 0x4 },
-	},
-};
-
-static const struct hda_input_mux macmini3_capture_source = {
-	.num_items = 2,
-	.items = {
-		{ "Line", 0x2 },
-		{ "CD", 0x4 },
-	},
-};
-
-static const struct hda_input_mux alc883_3stack_6ch_intel = {
-	.num_items = 4,
-	.items = {
-		{ "Mic", 0x1 },
-		{ "Front Mic", 0x0 },
-		{ "Line", 0x2 },
-		{ "CD", 0x4 },
-	},
-};
-
-static const struct hda_input_mux alc889A_mb31_capture_source = {
-	.num_items = 2,
-	.items = {
-		{ "Mic", 0x0 },
-		/* Front Mic (0x01) unused */
-		{ "Line", 0x2 },
-		/* Line 2 (0x03) unused */
-		/* CD (0x04) unused? */
-	},
-};
-
-static const struct hda_input_mux alc889A_imac91_capture_source = {
-	.num_items = 2,
-	.items = {
-		{ "Mic", 0x01 },
-		{ "Line", 0x2 }, /* Not sure! */
-	},
-};
-
-/* Macbook Air 2,1 */
-
-static const struct hda_channel_mode alc885_mba21_ch_modes[1] = {
-      { 2, NULL },
-};
-
-/*
- * macbook pro ALC885 can switch LineIn to LineOut without losing Mic
- */
-
-/*
- * 2ch mode
- */
-static const struct hda_verb alc885_mbp_ch2_init[] = {
-	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
-	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	{ } /* end */
-};
-
-/*
- * 4ch mode
- */
-static const struct hda_verb alc885_mbp_ch4_init[] = {
-	{ 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
-	{ 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{ 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 },
-	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{ } /* end */
-};
-
-static const struct hda_channel_mode alc885_mbp_4ch_modes[2] = {
-	{ 2, alc885_mbp_ch2_init },
-	{ 4, alc885_mbp_ch4_init },
-};
-
-/*
- * 2ch
- * Speakers/Woofer/HP = Front
- * LineIn = Input
- */
-static const struct hda_verb alc885_mb5_ch2_init[] = {
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{ } /* end */
-};
-
-/*
- * 6ch mode
- * Speakers/HP = Front
- * Woofer = LFE
- * LineIn = Surround
- */
-static const struct hda_verb alc885_mb5_ch6_init[] = {
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
-	{ } /* end */
-};
-
-static const struct hda_channel_mode alc885_mb5_6ch_modes[2] = {
-	{ 2, alc885_mb5_ch2_init },
-	{ 6, alc885_mb5_ch6_init },
-};
-
-#define alc885_macmini3_6ch_modes	alc885_mb5_6ch_modes
-
-/* Macbook Air 2,1 same control for HP and internal Speaker */
-
-static const struct snd_kcontrol_new alc885_mba21_mixer[] = {
-      HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
-      HDA_BIND_MUTE("Speaker Playback Switch", 0x0c, 0x02, HDA_OUTPUT),
-     { }
-};
-
-
-static const struct snd_kcontrol_new alc885_mbp3_mixer[] = {
-	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("Headphone Playback Switch", 0x0e, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
-	HDA_CODEC_MUTE  ("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Boost Volume", 0x1a, 0x00, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0x00, HDA_INPUT),
-	{ } /* end */
-};
-
-static const struct snd_kcontrol_new alc885_mb5_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x07, HDA_INPUT),
-	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x07, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
-	HDA_CODEC_MUTE  ("Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Boost Volume", 0x15, 0x00, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Boost Volume", 0x19, 0x00, HDA_INPUT),
-	{ } /* end */
-};
-
-static const struct snd_kcontrol_new alc885_macmini3_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("LFE Playback Volume", 0x0e, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("LFE Playback Switch", 0x0e, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0f, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE   ("Headphone Playback Switch", 0x0f, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x07, HDA_INPUT),
-	HDA_CODEC_MUTE  ("Line Playback Switch", 0x0b, 0x07, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Boost Volume", 0x15, 0x00, HDA_INPUT),
-	{ } /* end */
-};
-
-static const struct snd_kcontrol_new alc885_imac91_mixer[] = {
-	HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE("Speaker Playback Switch", 0x0c, 0x02, HDA_INPUT),
-	{ } /* end */
-};
-
-
-static const struct snd_kcontrol_new alc882_chmode_mixer[] = {
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Channel Mode",
-		.info = alc_ch_mode_info,
-		.get = alc_ch_mode_get,
-		.put = alc_ch_mode_put,
-	},
-	{ } /* end */
-};
-
-static const struct hda_verb alc882_base_init_verbs[] = {
-	/* Front mixer: unmute input/output amp left and right (volume = 0) */
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* Rear mixer */
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* CLFE mixer */
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* Side mixer */
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-
-	/* Front Pin: output 0 (0x0c) */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* Rear Pin: output 1 (0x0d) */
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
-	/* CLFE Pin: output 2 (0x0e) */
-	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x16, AC_VERB_SET_CONNECT_SEL, 0x02},
-	/* Side Pin: output 3 (0x0f) */
-	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
-	/* Mic (rear) pin: input vref at 80% */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Front Mic pin: input vref at 80% */
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Line In pin: input */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Line-2 In: Headphone output (output 0 - 0x0c) */
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* CD pin widget for input */
-	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-
-	/* FIXME: use matrix-type input source selection */
-	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
-	/* Input mixer2 */
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	/* Input mixer3 */
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	/* ADC2: mute amp left and right */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* ADC3: mute amp left and right */
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	{ }
-};
-
-#define alc883_init_verbs	alc882_base_init_verbs
-
-/* Macbook 5,1 */
-static const struct hda_verb alc885_mb5_init_verbs[] = {
-	/* DACs */
-	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Front mixer */
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* Surround mixer */
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* LFE mixer */
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* HP mixer */
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* Front Pin (0x0c) */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* LFE Pin (0x0e) */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},
-	/* HP Pin (0x0f) */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
-	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
-	/* Front Mic pin: input vref at 80% */
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Line In pin */
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0x1)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x7)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0x4)},
-	{ }
-};
-
-/* Macmini 3,1 */
-static const struct hda_verb alc885_macmini3_init_verbs[] = {
-	/* DACs */
-	{0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	/* Front mixer */
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* Surround mixer */
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* LFE mixer */
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* HP mixer */
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* Front Pin (0x0c) */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* LFE Pin (0x0e) */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | 0x01},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},
-	/* HP Pin (0x0f) */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x14, AC_VERB_SET_CONNECT_SEL, 0x03},
-	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
-	/* Line In pin */
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	{ }
-};
-
-
-static const struct hda_verb alc885_mba21_init_verbs[] = {
-	/*Internal and HP Speaker Mixer*/
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
-	/*Internal Speaker Pin (0x0c)*/
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, (PIN_OUT | AC_PINCTL_VREF_50) },
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* HP Pin: output 0 (0x0e) */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, (ALC_HP_EVENT | AC_USRSP_EN)},
-	/* Line in (is hp when jack connected)*/
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_VREF_50},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-
-	{ }
- };
-
-
-/* Macbook Pro rev3 */
-static const struct hda_verb alc885_mbp3_init_verbs[] = {
-	/* Front mixer: unmute input/output amp left and right (volume = 0) */
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* Rear mixer */
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* HP mixer */
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* Front Pin: output 0 (0x0c) */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* HP Pin: output 0 (0x0e) */
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x02},
-	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
-	/* Mic (rear) pin: input vref at 80% */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Front Mic pin: input vref at 80% */
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Line In pin: use output 1 when in LineOut mode */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
-
-	/* FIXME: use matrix-type input source selection */
-	/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
-	/* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	/* Input mixer2 */
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	/* Input mixer3 */
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	/* ADC1: mute amp left and right */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* ADC2: mute amp left and right */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* ADC3: mute amp left and right */
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
-
-	{ }
-};
-
-/* iMac 9,1 */
-static const struct hda_verb alc885_imac91_init_verbs[] = {
-	/* Internal Speaker Pin (0x0c) */
-	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, (PIN_OUT | AC_PINCTL_VREF_50) },
-	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x18, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, (PIN_OUT | AC_PINCTL_VREF_50) },
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* HP Pin: Rear */
-	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
-	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
-	{0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, (ALC_HP_EVENT | AC_USRSP_EN)},
-	/* Line in Rear */
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_VREF_50},
-	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Front Mic pin: input vref at 80% */
-	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
-	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
-	/* Rear mixer */
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* Line-Out mixer: unmute input/output amp left and right (volume = 0) */
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
-	/* 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	/* 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	/* 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In */
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
-	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
-	/* 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In */
-	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In */
-	{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
-	/* 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In */
-	{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
-	{0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{ }
-};
-
-/* Toggle speaker-output according to the hp-jack state */
-static void alc885_imac24_setup(struct hda_codec *codec)
-{
-	struct alc_spec *spec = codec->spec;
-
-	spec->autocfg.hp_pins[0] = 0x14;
-	spec->autocfg.speaker_pins[0] = 0x18;
-	spec->autocfg.speaker_pins[1] = 0x1a;
-	alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
-}
-
-#define alc885_mb5_setup	alc885_imac24_setup
-#define alc885_macmini3_setup	alc885_imac24_setup
-
-/* Macbook Air 2,1 */
-static void alc885_mba21_setup(struct hda_codec *codec)
-{
-	struct alc_spec *spec = codec->spec;
-
-	spec->autocfg.hp_pins[0] = 0x14;
-	spec->autocfg.speaker_pins[0] = 0x18;
-	alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
-}
-
-
-
-static void alc885_mbp3_setup(struct hda_codec *codec)
-{
-	struct alc_spec *spec = codec->spec;
-
-	spec->autocfg.hp_pins[0] = 0x15;
-	spec->autocfg.speaker_pins[0] = 0x14;
-	alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
-}
-
-static void alc885_imac91_setup(struct hda_codec *codec)
-{
-	struct alc_spec *spec = codec->spec;
-
-	spec->autocfg.hp_pins[0] = 0x14;
-	spec->autocfg.speaker_pins[0] = 0x18;
-	spec->autocfg.speaker_pins[1] = 0x1a;
-	alc_simple_setup_automute(spec, ALC_AUTOMUTE_AMP);
-}
-
-/* 2ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:front) */
-static const struct hda_verb alc889A_mb31_ch2_init[] = {
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},             /* HP as front */
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},    /* Line as input */
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Line off */
-	{ } /* end */
-};
-
-/* 4ch mode (Speaker:front, Subwoofer:CLFE, Line:CLFE, Headphones:front) */
-static const struct hda_verb alc889A_mb31_ch4_init[] = {
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},             /* HP as front */
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},   /* Line as output */
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
-	{ } /* end */
-};
-
-/* 5ch mode (Speaker:front, Subwoofer:CLFE, Line:input, Headphones:rear) */
-static const struct hda_verb alc889A_mb31_ch5_init[] = {
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},             /* HP as rear */
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Subwoofer on */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},    /* Line as input */
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Line off */
-	{ } /* end */
-};
-
-/* 6ch mode (Speaker:front, Subwoofer:off, Line:CLFE, Headphones:Rear) */
-static const struct hda_verb alc889A_mb31_ch6_init[] = {
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},             /* HP as front */
-	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},   /* Subwoofer off */
-	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},   /* Line as output */
-	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, /* Line on */
-	{ } /* end */
-};
-
-static const struct hda_channel_mode alc889A_mb31_6ch_modes[4] = {
-	{ 2, alc889A_mb31_ch2_init },
-	{ 4, alc889A_mb31_ch4_init },
-	{ 5, alc889A_mb31_ch5_init },
-	{ 6, alc889A_mb31_ch6_init },
-};
-
-static const struct snd_kcontrol_new alc883_3ST_6ch_mixer[] = {
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
-	HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT),
-	HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("Front Mic Boost Volume", 0x19, 0, HDA_INPUT),
-	HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
-	{ } /* end */
-};
-
-static const struct snd_kcontrol_new alc889A_mb31_mixer[] = {
-	/* Output mixers */
-	HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE("Front Playback Switch", 0x0c, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x00,
-		HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 0x02, HDA_INPUT),
-	HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x00, HDA_OUTPUT),
-	HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 0x02, HDA_INPUT),
-	/* Output switches */
-	HDA_CODEC_MUTE("Enable Speaker", 0x14, 0x00, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Enable Headphones", 0x15, 0x00, HDA_OUTPUT),
-	HDA_CODEC_MUTE_MONO("Enable LFE", 0x16, 2, 0x00, HDA_OUTPUT),
-	/* Boost mixers */
-	HDA_CODEC_VOLUME("Mic Boost Volume", 0x18, 0x00, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Boost Volume", 0x1a, 0x00, HDA_INPUT),
-	/* Input mixers */
-	HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
-	HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
-	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
-	{ } /* end */
-};
-
-static const struct snd_kcontrol_new alc883_chmode_mixer[] = {
-	{
-		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.name = "Channel Mode",
-		.info = alc_ch_mode_info,
-		.get = alc_ch_mode_get,
-		.put = alc_ch_mode_put,
-	},
-	{ } /* end */
-};
-
-static const struct hda_verb alc889A_mb31_verbs[] = {
-	/* Init rear pin (used as headphone output) */
-	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc4},    /* Apple Headphones */
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},           /* Connect to front */
-	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC_HP_EVENT | AC_USRSP_EN},
-	/* Init line pin (used as output in 4ch and 6ch mode) */
-	{0x1a, AC_VERB_SET_CONNECT_SEL, 0x02},           /* Connect to CLFE */
-	/* Init line 2 pin (used as headphone out by default) */
-	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},  /* Use as input */
-	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, /* Mute output */
-	{ } /* end */
-};
-
-/* Mute speakers according to the headphone jack state */
-static void alc889A_mb31_automute(struct hda_codec *codec)
-{
-	unsigned int present;
-
-	/* Mute only in 2ch or 4ch mode */
-	if (snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_CONNECT_SEL, 0)
-	    == 0x00) {
-		present = snd_hda_jack_detect(codec, 0x15);
-		snd_hda_codec_amp_stereo(codec, 0x14,  HDA_OUTPUT, 0,
-			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
-			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
-	}
-}
-
-static void alc889A_mb31_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	if ((res >> 26) == ALC_HP_EVENT)
-		alc889A_mb31_automute(codec);
-}
-
-static void alc882_unsol_event(struct hda_codec *codec, unsigned int res)
-{
-	alc_exec_unsol_event(codec, res >> 26);
-}
-
-/*
- * configuration and preset
- */
-static const char * const alc882_models[ALC882_MODEL_LAST] = {
-	[ALC885_MB5]		= "mb5",
-	[ALC885_MACMINI3]	= "macmini3",
-	[ALC885_MBA21]		= "mba21",
-	[ALC885_MBP3]		= "mbp3",
-	[ALC885_IMAC91]		= "imac91",
-	[ALC889A_MB31]		= "mb31",
-	[ALC882_AUTO]		= "auto",
-};
-
-/* codec SSID table for Intel Mac */
-static const struct snd_pci_quirk alc882_ssid_cfg_tbl[] = {
-	SND_PCI_QUIRK(0x106b, 0x00a0, "MacBookPro 3,1", ALC885_MBP3),
-	SND_PCI_QUIRK(0x106b, 0x00a1, "Macbook", ALC885_MBP3),
-	SND_PCI_QUIRK(0x106b, 0x00a4, "MacbookPro 4,1", ALC885_MBP3),
-	SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC885_MBP3),
-	SND_PCI_QUIRK(0x106b, 0x3000, "iMac", ALC889A_MB31),
-	SND_PCI_QUIRK(0x106b, 0x3400, "MacBookAir 1,1", ALC885_MBP3),
-	SND_PCI_QUIRK(0x106b, 0x3500, "MacBookAir 2,1", ALC885_MBA21),
-	SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
-	SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
-	SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC885_IMAC91),
-	SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
-	SND_PCI_QUIRK(0x106b, 0x4a00, "Macbook 5,2", ALC885_MB5),
-	/* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2,
-	 * so apparently no perfect solution yet
-	 */
-	SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5),
-	SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC885_MB5),
-	SND_PCI_QUIRK(0x106b, 0x4100, "Macmini 3,1", ALC885_MACMINI3),
-	{} /* terminator */
-};
-
-static const struct alc_config_preset alc882_presets[] = {
-	   [ALC885_MBA21] = {
-			.mixers = { alc885_mba21_mixer },
-			.init_verbs = { alc885_mba21_init_verbs, alc880_gpio1_init_verbs },
-			.num_dacs = 2,
-			.dac_nids = alc882_dac_nids,
-			.channel_mode = alc885_mba21_ch_modes,
-			.num_channel_mode = ARRAY_SIZE(alc885_mba21_ch_modes),
-			.input_mux = &alc882_capture_source,
-			.unsol_event = alc882_unsol_event,
-			.setup = alc885_mba21_setup,
-			.init_hook = alc_hp_automute,
-       },
-	[ALC885_MBP3] = {
-		.mixers = { alc885_mbp3_mixer, alc882_chmode_mixer },
-		.init_verbs = { alc885_mbp3_init_verbs,
-				alc880_gpio1_init_verbs },
-		.num_dacs = 2,
-		.dac_nids = alc882_dac_nids,
-		.hp_nid = 0x04,
-		.channel_mode = alc885_mbp_4ch_modes,
-		.num_channel_mode = ARRAY_SIZE(alc885_mbp_4ch_modes),
-		.input_mux = &alc882_capture_source,
-		.dig_out_nid = ALC882_DIGOUT_NID,
-		.dig_in_nid = ALC882_DIGIN_NID,
-		.unsol_event = alc882_unsol_event,
-		.setup = alc885_mbp3_setup,
-		.init_hook = alc_hp_automute,
-	},
-	[ALC885_MB5] = {
-		.mixers = { alc885_mb5_mixer, alc882_chmode_mixer },
-		.init_verbs = { alc885_mb5_init_verbs,
-				alc880_gpio1_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc882_dac_nids),
-		.dac_nids = alc882_dac_nids,
-		.channel_mode = alc885_mb5_6ch_modes,
-		.num_channel_mode = ARRAY_SIZE(alc885_mb5_6ch_modes),
-		.input_mux = &mb5_capture_source,
-		.dig_out_nid = ALC882_DIGOUT_NID,
-		.dig_in_nid = ALC882_DIGIN_NID,
-		.unsol_event = alc882_unsol_event,
-		.setup = alc885_mb5_setup,
-		.init_hook = alc_hp_automute,
-	},
-	[ALC885_MACMINI3] = {
-		.mixers = { alc885_macmini3_mixer, alc882_chmode_mixer },
-		.init_verbs = { alc885_macmini3_init_verbs,
-				alc880_gpio1_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc882_dac_nids),
-		.dac_nids = alc882_dac_nids,
-		.channel_mode = alc885_macmini3_6ch_modes,
-		.num_channel_mode = ARRAY_SIZE(alc885_macmini3_6ch_modes),
-		.input_mux = &macmini3_capture_source,
-		.dig_out_nid = ALC882_DIGOUT_NID,
-		.dig_in_nid = ALC882_DIGIN_NID,
-		.unsol_event = alc882_unsol_event,
-		.setup = alc885_macmini3_setup,
-		.init_hook = alc_hp_automute,
-	},
-	[ALC885_IMAC91] = {
-		.mixers = {alc885_imac91_mixer},
-		.init_verbs = { alc885_imac91_init_verbs,
-				alc880_gpio1_init_verbs },
-		.num_dacs = ARRAY_SIZE(alc882_dac_nids),
-		.dac_nids = alc882_dac_nids,
-		.channel_mode = alc885_mba21_ch_modes,
-		.num_channel_mode = ARRAY_SIZE(alc885_mba21_ch_modes),
-		.input_mux = &alc889A_imac91_capture_source,
-		.dig_out_nid = ALC882_DIGOUT_NID,
-		.dig_in_nid = ALC882_DIGIN_NID,
-		.unsol_event = alc882_unsol_event,
-		.setup = alc885_imac91_setup,
-		.init_hook = alc_hp_automute,
-	},
-	[ALC889A_MB31] = {
-		.mixers = { alc889A_mb31_mixer, alc883_chmode_mixer},
-		.init_verbs = { alc883_init_verbs, alc889A_mb31_verbs,
-			alc880_gpio1_init_verbs },
-		.adc_nids = alc883_adc_nids,
-		.num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
-		.capsrc_nids = alc883_capsrc_nids,
-		.dac_nids = alc883_dac_nids,
-		.num_dacs = ARRAY_SIZE(alc883_dac_nids),
-		.channel_mode = alc889A_mb31_6ch_modes,
-		.num_channel_mode = ARRAY_SIZE(alc889A_mb31_6ch_modes),
-		.input_mux = &alc889A_mb31_capture_source,
-		.dig_out_nid = ALC883_DIGOUT_NID,
-		.unsol_event = alc889A_mb31_unsol_event,
-		.init_hook = alc889A_mb31_automute,
-	},
-};
-
-

sound/pci/hda/alc_quirks.c

@@ -1,480 +0,0 @@
-/*
- * Common codes for Realtek codec quirks
- * included by patch_realtek.c
- */
-
-/*
- * configuration template - to be copied to the spec instance
- */
-struct alc_config_preset {
-	const struct snd_kcontrol_new *mixers[5]; /* should be identical size
-					     * with spec
-					     */
-	const struct snd_kcontrol_new *cap_mixer; /* capture mixer */
-	const struct hda_verb *init_verbs[5];
-	unsigned int num_dacs;
-	const hda_nid_t *dac_nids;
-	hda_nid_t dig_out_nid;		/* optional */
-	hda_nid_t hp_nid;		/* optional */
-	const hda_nid_t *slave_dig_outs;
-	unsigned int num_adc_nids;
-	const hda_nid_t *adc_nids;
-	const hda_nid_t *capsrc_nids;
-	hda_nid_t dig_in_nid;
-	unsigned int num_channel_mode;
-	const struct hda_channel_mode *channel_mode;
-	int need_dac_fix;
-	int const_channel_count;
-	unsigned int num_mux_defs;
-	const struct hda_input_mux *input_mux;
-	void (*unsol_event)(struct hda_codec *, unsigned int);
-	void (*setup)(struct hda_codec *);
-	void (*init_hook)(struct hda_codec *);
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-	const struct hda_amp_list *loopbacks;
-	void (*power_hook)(struct hda_codec *codec);
-#endif
-};
-
-/*
- * channel mode setting
- */
-static int alc_ch_mode_info(struct snd_kcontrol *kcontrol,
-			    struct snd_ctl_elem_info *uinfo)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct alc_spec *spec = codec->spec;
-	return snd_hda_ch_mode_info(codec, uinfo, spec->channel_mode,
-				    spec->num_channel_mode);
-}
-
-static int alc_ch_mode_get(struct snd_kcontrol *kcontrol,
-			   struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct alc_spec *spec = codec->spec;
-	return snd_hda_ch_mode_get(codec, ucontrol, spec->channel_mode,
-				   spec->num_channel_mode,
-				   spec->ext_channel_count);
-}
-
-static int alc_ch_mode_put(struct snd_kcontrol *kcontrol,
-			   struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct alc_spec *spec = codec->spec;
-	int err = snd_hda_ch_mode_put(codec, ucontrol, spec->channel_mode,
-				      spec->num_channel_mode,
-				      &spec->ext_channel_count);
-	if (err >= 0 && !spec->const_channel_count) {
-		spec->multiout.max_channels = spec->ext_channel_count;
-		if (spec->need_dac_fix)
-			spec->multiout.num_dacs = spec->multiout.max_channels / 2;
-	}
-	return err;
-}
-
-/*
- * Control the mode of pin widget settings via the mixer.  "pc" is used
- * instead of "%" to avoid consequences of accidentally treating the % as
- * being part of a format specifier.  Maximum allowed length of a value is
- * 63 characters plus NULL terminator.
- *
- * Note: some retasking pin complexes seem to ignore requests for input
- * states other than HiZ (eg: PIN_VREFxx) and revert to HiZ if any of these
- * are requested.  Therefore order this list so that this behaviour will not
- * cause problems when mixer clients move through the enum sequentially.
- * NIDs 0x0f and 0x10 have been observed to have this behaviour as of
- * March 2006.
- */
-static const char * const alc_pin_mode_names[] = {
-	"Mic 50pc bias", "Mic 80pc bias",
-	"Line in", "Line out", "Headphone out",
-};
-static const unsigned char alc_pin_mode_values[] = {
-	PIN_VREF50, PIN_VREF80, PIN_IN, PIN_OUT, PIN_HP,
-};
-/* The control can present all 5 options, or it can limit the options based
- * in the pin being assumed to be exclusively an input or an output pin.  In
- * addition, "input" pins may or may not process the mic bias option
- * depending on actual widget capability (NIDs 0x0f and 0x10 don't seem to
- * accept requests for bias as of chip versions up to March 2006) and/or
- * wiring in the computer.
- */
-#define ALC_PIN_DIR_IN              0x00
-#define ALC_PIN_DIR_OUT             0x01
-#define ALC_PIN_DIR_INOUT           0x02
-#define ALC_PIN_DIR_IN_NOMICBIAS    0x03
-#define ALC_PIN_DIR_INOUT_NOMICBIAS 0x04
-
-/* Info about the pin modes supported by the different pin direction modes.
- * For each direction the minimum and maximum values are given.
- */
-static const signed char alc_pin_mode_dir_info[5][2] = {
-	{ 0, 2 },    /* ALC_PIN_DIR_IN */
-	{ 3, 4 },    /* ALC_PIN_DIR_OUT */
-	{ 0, 4 },    /* ALC_PIN_DIR_INOUT */
-	{ 2, 2 },    /* ALC_PIN_DIR_IN_NOMICBIAS */
-	{ 2, 4 },    /* ALC_PIN_DIR_INOUT_NOMICBIAS */
-};
-#define alc_pin_mode_min(_dir) (alc_pin_mode_dir_info[_dir][0])
-#define alc_pin_mode_max(_dir) (alc_pin_mode_dir_info[_dir][1])
-#define alc_pin_mode_n_items(_dir) \
-	(alc_pin_mode_max(_dir)-alc_pin_mode_min(_dir)+1)
-
-static int alc_pin_mode_info(struct snd_kcontrol *kcontrol,
-			     struct snd_ctl_elem_info *uinfo)
-{
-	unsigned int item_num = uinfo->value.enumerated.item;
-	unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
-
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
-	uinfo->count = 1;
-	uinfo->value.enumerated.items = alc_pin_mode_n_items(dir);
-
-	if (item_num<alc_pin_mode_min(dir) || item_num>alc_pin_mode_max(dir))
-		item_num = alc_pin_mode_min(dir);
-	strcpy(uinfo->value.enumerated.name, alc_pin_mode_names[item_num]);
-	return 0;
-}
-
-static int alc_pin_mode_get(struct snd_kcontrol *kcontrol,
-			    struct snd_ctl_elem_value *ucontrol)
-{
-	unsigned int i;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
-	long *valp = ucontrol->value.integer.value;
-	unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
-						 AC_VERB_GET_PIN_WIDGET_CONTROL,
-						 0x00);
-
-	/* Find enumerated value for current pinctl setting */
-	i = alc_pin_mode_min(dir);
-	while (i <= alc_pin_mode_max(dir) && alc_pin_mode_values[i] != pinctl)
-		i++;
-	*valp = i <= alc_pin_mode_max(dir) ? i: alc_pin_mode_min(dir);
-	return 0;
-}
-
-static int alc_pin_mode_put(struct snd_kcontrol *kcontrol,
-			    struct snd_ctl_elem_value *ucontrol)
-{
-	signed int change;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char dir = (kcontrol->private_value >> 16) & 0xff;
-	long val = *ucontrol->value.integer.value;
-	unsigned int pinctl = snd_hda_codec_read(codec, nid, 0,
-						 AC_VERB_GET_PIN_WIDGET_CONTROL,
-						 0x00);
-
-	if (val < alc_pin_mode_min(dir) || val > alc_pin_mode_max(dir))
-		val = alc_pin_mode_min(dir);
-
-	change = pinctl != alc_pin_mode_values[val];
-	if (change) {
-		/* Set pin mode to that requested */
-		snd_hda_codec_write_cache(codec, nid, 0,
-					  AC_VERB_SET_PIN_WIDGET_CONTROL,
-					  alc_pin_mode_values[val]);
-
-		/* Also enable the retasking pin's input/output as required
-		 * for the requested pin mode.  Enum values of 2 or less are
-		 * input modes.
-		 *
-		 * Dynamically switching the input/output buffers probably
-		 * reduces noise slightly (particularly on input) so we'll
-		 * do it.  However, having both input and output buffers
-		 * enabled simultaneously doesn't seem to be problematic if
-		 * this turns out to be necessary in the future.
-		 */
-		if (val <= 2) {
-			snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE, HDA_AMP_MUTE);
-			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
-						 HDA_AMP_MUTE, 0);
-		} else {
-			snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT, 0,
-						 HDA_AMP_MUTE, HDA_AMP_MUTE);
-			snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE, 0);
-		}
-	}
-	return change;
-}
-
-#define ALC_PIN_MODE(xname, nid, dir) \
-	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
-	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-	  .info = alc_pin_mode_info, \
-	  .get = alc_pin_mode_get, \
-	  .put = alc_pin_mode_put, \
-	  .private_value = nid | (dir<<16) }
-
-/* A switch control for ALC260 GPIO pins.  Multiple GPIOs can be ganged
- * together using a mask with more than one bit set.  This control is
- * currently used only by the ALC260 test model.  At this stage they are not
- * needed for any "production" models.
- */
-#ifdef CONFIG_SND_DEBUG
-#define alc_gpio_data_info	snd_ctl_boolean_mono_info
-
-static int alc_gpio_data_get(struct snd_kcontrol *kcontrol,
-			     struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long *valp = ucontrol->value.integer.value;
-	unsigned int val = snd_hda_codec_read(codec, nid, 0,
-					      AC_VERB_GET_GPIO_DATA, 0x00);
-
-	*valp = (val & mask) != 0;
-	return 0;
-}
-static int alc_gpio_data_put(struct snd_kcontrol *kcontrol,
-			     struct snd_ctl_elem_value *ucontrol)
-{
-	signed int change;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long val = *ucontrol->value.integer.value;
-	unsigned int gpio_data = snd_hda_codec_read(codec, nid, 0,
-						    AC_VERB_GET_GPIO_DATA,
-						    0x00);
-
-	/* Set/unset the masked GPIO bit(s) as needed */
-	change = (val == 0 ? 0 : mask) != (gpio_data & mask);
-	if (val == 0)
-		gpio_data &= ~mask;
-	else
-		gpio_data |= mask;
-	snd_hda_codec_write_cache(codec, nid, 0,
-				  AC_VERB_SET_GPIO_DATA, gpio_data);
-
-	return change;
-}
-#define ALC_GPIO_DATA_SWITCH(xname, nid, mask) \
-	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
-	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-	  .info = alc_gpio_data_info, \
-	  .get = alc_gpio_data_get, \
-	  .put = alc_gpio_data_put, \
-	  .private_value = nid | (mask<<16) }
-#endif   /* CONFIG_SND_DEBUG */
-
-/* A switch control to allow the enabling of the digital IO pins on the
- * ALC260.  This is incredibly simplistic; the intention of this control is
- * to provide something in the test model allowing digital outputs to be
- * identified if present.  If models are found which can utilise these
- * outputs a more complete mixer control can be devised for those models if
- * necessary.
- */
-#ifdef CONFIG_SND_DEBUG
-#define alc_spdif_ctrl_info	snd_ctl_boolean_mono_info
-
-static int alc_spdif_ctrl_get(struct snd_kcontrol *kcontrol,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long *valp = ucontrol->value.integer.value;
-	unsigned int val = snd_hda_codec_read(codec, nid, 0,
-					      AC_VERB_GET_DIGI_CONVERT_1, 0x00);
-
-	*valp = (val & mask) != 0;
-	return 0;
-}
-static int alc_spdif_ctrl_put(struct snd_kcontrol *kcontrol,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	signed int change;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long val = *ucontrol->value.integer.value;
-	unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
-						    AC_VERB_GET_DIGI_CONVERT_1,
-						    0x00);
-
-	/* Set/unset the masked control bit(s) as needed */
-	change = (val == 0 ? 0 : mask) != (ctrl_data & mask);
-	if (val==0)
-		ctrl_data &= ~mask;
-	else
-		ctrl_data |= mask;
-	snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_DIGI_CONVERT_1,
-				  ctrl_data);
-
-	return change;
-}
-#define ALC_SPDIF_CTRL_SWITCH(xname, nid, mask) \
-	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
-	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-	  .info = alc_spdif_ctrl_info, \
-	  .get = alc_spdif_ctrl_get, \
-	  .put = alc_spdif_ctrl_put, \
-	  .private_value = nid | (mask<<16) }
-#endif   /* CONFIG_SND_DEBUG */
-
-/* A switch control to allow the enabling EAPD digital outputs on the ALC26x.
- * Again, this is only used in the ALC26x test models to help identify when
- * the EAPD line must be asserted for features to work.
- */
-#ifdef CONFIG_SND_DEBUG
-#define alc_eapd_ctrl_info	snd_ctl_boolean_mono_info
-
-static int alc_eapd_ctrl_get(struct snd_kcontrol *kcontrol,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long *valp = ucontrol->value.integer.value;
-	unsigned int val = snd_hda_codec_read(codec, nid, 0,
-					      AC_VERB_GET_EAPD_BTLENABLE, 0x00);
-
-	*valp = (val & mask) != 0;
-	return 0;
-}
-
-static int alc_eapd_ctrl_put(struct snd_kcontrol *kcontrol,
-			      struct snd_ctl_elem_value *ucontrol)
-{
-	int change;
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = kcontrol->private_value & 0xffff;
-	unsigned char mask = (kcontrol->private_value >> 16) & 0xff;
-	long val = *ucontrol->value.integer.value;
-	unsigned int ctrl_data = snd_hda_codec_read(codec, nid, 0,
-						    AC_VERB_GET_EAPD_BTLENABLE,
-						    0x00);
-
-	/* Set/unset the masked control bit(s) as needed */
-	change = (!val ? 0 : mask) != (ctrl_data & mask);
-	if (!val)
-		ctrl_data &= ~mask;
-	else
-		ctrl_data |= mask;
-	snd_hda_codec_write_cache(codec, nid, 0, AC_VERB_SET_EAPD_BTLENABLE,
-				  ctrl_data);
-
-	return change;
-}
-
-#define ALC_EAPD_CTRL_SWITCH(xname, nid, mask) \
-	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = 0,  \
-	  .subdevice = HDA_SUBDEV_NID_FLAG | nid, \
-	  .info = alc_eapd_ctrl_info, \
-	  .get = alc_eapd_ctrl_get, \
-	  .put = alc_eapd_ctrl_put, \
-	  .private_value = nid | (mask<<16) }
-#endif   /* CONFIG_SND_DEBUG */
-
-static void alc_fixup_autocfg_pin_nums(struct hda_codec *codec)
-{
-	struct alc_spec *spec = codec->spec;
-	struct auto_pin_cfg *cfg = &spec->autocfg;
-
-	if (!cfg->line_outs) {
-		while (cfg->line_outs < AUTO_CFG_MAX_OUTS &&
-		       cfg->line_out_pins[cfg->line_outs])
-			cfg->line_outs++;
-	}
-	if (!cfg->speaker_outs) {
-		while (cfg->speaker_outs < AUTO_CFG_MAX_OUTS &&
-		       cfg->speaker_pins[cfg->speaker_outs])
-			cfg->speaker_outs++;
-	}
-	if (!cfg->hp_outs) {
-		while (cfg->hp_outs < AUTO_CFG_MAX_OUTS &&
-		       cfg->hp_pins[cfg->hp_outs])
-			cfg->hp_outs++;
-	}
-}
-
-/*
- * set up from the preset table
- */
-static void setup_preset(struct hda_codec *codec,
-			 const struct alc_config_preset *preset)
-{
-	struct alc_spec *spec = codec->spec;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++)
-		add_mixer(spec, preset->mixers[i]);
-	spec->cap_mixer = preset->cap_mixer;
-	for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i];
-	     i++)
-		add_verb(spec, preset->init_verbs[i]);
-
-	spec->channel_mode = preset->channel_mode;
-	spec->num_channel_mode = preset->num_channel_mode;
-	spec->need_dac_fix = preset->need_dac_fix;
-	spec->const_channel_count = preset->const_channel_count;
-
-	if (preset->const_channel_count)
-		spec->multiout.max_channels = preset->const_channel_count;
-	else
-		spec->multiout.max_channels = spec->channel_mode[0].channels;
-	spec->ext_channel_count = spec->channel_mode[0].channels;
-
-	spec->multiout.num_dacs = preset->num_dacs;
-	spec->multiout.dac_nids = preset->dac_nids;
-	spec->multiout.dig_out_nid = preset->dig_out_nid;
-	spec->multiout.slave_dig_outs = preset->slave_dig_outs;
-	spec->multiout.hp_nid = preset->hp_nid;
-
-	spec->num_mux_defs = preset->num_mux_defs;
-	if (!spec->num_mux_defs)
-		spec->num_mux_defs = 1;
-	spec->input_mux = preset->input_mux;
-
-	spec->num_adc_nids = preset->num_adc_nids;
-	spec->adc_nids = preset->adc_nids;
-	spec->capsrc_nids = preset->capsrc_nids;
-	spec->dig_in_nid = preset->dig_in_nid;
-
-	spec->unsol_event = preset->unsol_event;
-	spec->init_hook = preset->init_hook;
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-	spec->power_hook = preset->power_hook;
-	spec->loopback.amplist = preset->loopbacks;
-#endif
-
-	if (preset->setup)
-		preset->setup(codec);
-
-	alc_fixup_autocfg_pin_nums(codec);
-}
-
-static void alc_simple_setup_automute(struct alc_spec *spec, int mode)
-{
-	int lo_pin = spec->autocfg.line_out_pins[0];
-
-	if (lo_pin == spec->autocfg.speaker_pins[0] ||
-		lo_pin == spec->autocfg.hp_pins[0])
-		lo_pin = 0;
-	spec->automute_mode = mode;
-	spec->detect_hp = !!spec->autocfg.hp_pins[0];
-	spec->detect_lo = !!lo_pin;
-	spec->automute_lo = spec->automute_lo_possible = !!lo_pin;
-	spec->automute_speaker = spec->automute_speaker_possible = !!spec->autocfg.speaker_pins[0];
-}
-
-/* auto-toggle front mic */
-static void alc88x_simple_mic_automute(struct hda_codec *codec)
-{
- 	unsigned int present;
-	unsigned char bits;
-
-	present = snd_hda_jack_detect(codec, 0x18);
-	bits = present ? HDA_AMP_MUTE : 0;
-	snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits);
-}
-

sound/pci/hda/hda_codec.c

@@ -19,6 +19,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -2304,7 +2305,7 @@ typedef int (*map_slave_func_t)(void *, struct snd_kcontrol *);
 
 /* apply the function to all matching slave ctls in the mixer list */
 static int map_slaves(struct hda_codec *codec, const char * const *slaves,
-		      map_slave_func_t func, void *data) 
+		      const char *suffix, map_slave_func_t func, void *data) 
 {
 	struct hda_nid_item *items;
 	const char * const *s;
@@ -2317,7 +2318,14 @@ static int map_slaves(struct hda_codec *codec, const char * const *slaves,
 		    sctl->id.iface != SNDRV_CTL_ELEM_IFACE_MIXER)
 			continue;
 		for (s = slaves; *s; s++) {
-			if (!strcmp(sctl->id.name, *s)) {
+			char tmpname[sizeof(sctl->id.name)];
+			const char *name = *s;
+			if (suffix) {
+				snprintf(tmpname, sizeof(tmpname), "%s %s",
+					 name, suffix);
+				name = tmpname;
+			}
+			if (!strcmp(sctl->id.name, name)) {
 				err = func(data, sctl);
 				if (err)
 					return err;
@@ -2333,12 +2341,65 @@ static int check_slave_present(void *data, struct snd_kcontrol *sctl)
 	return 1;
 }
 
+/* guess the value corresponding to 0dB */
+static int get_kctl_0dB_offset(struct snd_kcontrol *kctl)
+{
+	int _tlv[4];
+	const int *tlv = NULL;
+	int val = -1;
+
+	if (kctl->vd[0].access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
+		/* FIXME: set_fs() hack for obtaining user-space TLV data */
+		mm_segment_t fs = get_fs();
+		set_fs(get_ds());
+		if (!kctl->tlv.c(kctl, 0, sizeof(_tlv), _tlv))
+			tlv = _tlv;
+		set_fs(fs);
+	} else if (kctl->vd[0].access & SNDRV_CTL_ELEM_ACCESS_TLV_READ)
+		tlv = kctl->tlv.p;
+	if (tlv && tlv[0] == SNDRV_CTL_TLVT_DB_SCALE)
+		val = -tlv[2] / tlv[3];
+	return val;
+}
+
+/* call kctl->put with the given value(s) */
+static int put_kctl_with_value(struct snd_kcontrol *kctl, int val)
+{
+	struct snd_ctl_elem_value *ucontrol;
+	ucontrol = kzalloc(sizeof(*ucontrol), GFP_KERNEL);
+	if (!ucontrol)
+		return -ENOMEM;
+	ucontrol->value.integer.value[0] = val;
+	ucontrol->value.integer.value[1] = val;
+	kctl->put(kctl, ucontrol);
+	kfree(ucontrol);
+	return 0;
+}
+
+/* initialize the slave volume with 0dB */
+static int init_slave_0dB(void *data, struct snd_kcontrol *slave)
+{
+	int offset = get_kctl_0dB_offset(slave);
+	if (offset > 0)
+		put_kctl_with_value(slave, offset);
+	return 0;
+}
+
+/* unmute the slave */
+static int init_slave_unmute(void *data, struct snd_kcontrol *slave)
+{
+	return put_kctl_with_value(slave, 1);
+}
+
 /**
  * snd_hda_add_vmaster - create a virtual master control and add slaves
  * @codec: HD-audio codec
  * @name: vmaster control name
  * @tlv: TLV data (optional)
  * @slaves: slave control names (optional)
+ * @suffix: suffix string to each slave name (optional)
+ * @init_slave_vol: initialize slaves to unmute/0dB
+ * @ctl_ret: store the vmaster kcontrol in return
  *
  * Create a virtual master control with the given name.  The TLV data
  * must be either NULL or a valid data.
@@ -2349,13 +2410,18 @@ static int check_slave_present(void *data, struct snd_kcontrol *sctl)
  *
  * This function returns zero if successful or a negative error code.
  */
-int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
-			unsigned int *tlv, const char * const *slaves)
+int __snd_hda_add_vmaster(struct hda_codec *codec, char *name,
+			unsigned int *tlv, const char * const *slaves,
+			  const char *suffix, bool init_slave_vol,
+			  struct snd_kcontrol **ctl_ret)
 {
 	struct snd_kcontrol *kctl;
 	int err;
 
-	err = map_slaves(codec, slaves, check_slave_present, NULL);
+	if (ctl_ret)
+		*ctl_ret = NULL;
+
+	err = map_slaves(codec, slaves, suffix, check_slave_present, NULL);
 	if (err != 1) {
 		snd_printdd("No slave found for %s\n", name);
 		return 0;
@@ -2367,13 +2433,119 @@ int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
 	if (err < 0)
 		return err;
 
-	err = map_slaves(codec, slaves, (map_slave_func_t)snd_ctl_add_slave,
-			 kctl);
+	err = map_slaves(codec, slaves, suffix,
+			 (map_slave_func_t)snd_ctl_add_slave, kctl);
 	if (err < 0)
 		return err;
+
+	/* init with master mute & zero volume */
+	put_kctl_with_value(kctl, 0);
+	if (init_slave_vol)
+		map_slaves(codec, slaves, suffix,
+			   tlv ? init_slave_0dB : init_slave_unmute, kctl);
+
+	if (ctl_ret)
+		*ctl_ret = kctl;
 	return 0;
 }
-EXPORT_SYMBOL_HDA(snd_hda_add_vmaster);
+EXPORT_SYMBOL_HDA(__snd_hda_add_vmaster);
+
+/*
+ * mute-LED control using vmaster
+ */
+static int vmaster_mute_mode_info(struct snd_kcontrol *kcontrol,
+				  struct snd_ctl_elem_info *uinfo)
+{
+	static const char * const texts[] = {
+		"Off", "On", "Follow Master"
+	};
+	unsigned int index;
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = 3;
+	index = uinfo->value.enumerated.item;
+	if (index >= 3)
+		index = 2;
+	strcpy(uinfo->value.enumerated.name, texts[index]);
+	return 0;
+}
+
+static int vmaster_mute_mode_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_vmaster_mute_hook *hook = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.enumerated.item[0] = hook->mute_mode;
+	return 0;
+}
+
+static int vmaster_mute_mode_put(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_vmaster_mute_hook *hook = snd_kcontrol_chip(kcontrol);
+	unsigned int old_mode = hook->mute_mode;
+
+	hook->mute_mode = ucontrol->value.enumerated.item[0];
+	if (hook->mute_mode > HDA_VMUTE_FOLLOW_MASTER)
+		hook->mute_mode = HDA_VMUTE_FOLLOW_MASTER;
+	if (old_mode == hook->mute_mode)
+		return 0;
+	snd_hda_sync_vmaster_hook(hook);
+	return 1;
+}
+
+static struct snd_kcontrol_new vmaster_mute_mode = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Mute-LED Mode",
+	.info = vmaster_mute_mode_info,
+	.get = vmaster_mute_mode_get,
+	.put = vmaster_mute_mode_put,
+};
+
+/*
+ * Add a mute-LED hook with the given vmaster switch kctl
+ * "Mute-LED Mode" control is automatically created and associated with
+ * the given hook.
+ */
+int snd_hda_add_vmaster_hook(struct hda_codec *codec,
+			     struct hda_vmaster_mute_hook *hook,
+			     bool expose_enum_ctl)
+{
+	struct snd_kcontrol *kctl;
+
+	if (!hook->hook || !hook->sw_kctl)
+		return 0;
+	snd_ctl_add_vmaster_hook(hook->sw_kctl, hook->hook, codec);
+	hook->codec = codec;
+	hook->mute_mode = HDA_VMUTE_FOLLOW_MASTER;
+	if (!expose_enum_ctl)
+		return 0;
+	kctl = snd_ctl_new1(&vmaster_mute_mode, hook);
+	if (!kctl)
+		return -ENOMEM;
+	return snd_hda_ctl_add(codec, 0, kctl);
+}
+EXPORT_SYMBOL_HDA(snd_hda_add_vmaster_hook);
+
+/*
+ * Call the hook with the current value for synchronization
+ * Should be called in init callback
+ */
+void snd_hda_sync_vmaster_hook(struct hda_vmaster_mute_hook *hook)
+{
+	if (!hook->hook || !hook->codec)
+		return;
+	switch (hook->mute_mode) {
+	case HDA_VMUTE_FOLLOW_MASTER:
+		snd_ctl_sync_vmaster_hook(hook->sw_kctl);
+		break;
+	default:
+		hook->hook(hook->codec, hook->mute_mode);
+		break;
+	}
+}
+EXPORT_SYMBOL_HDA(snd_hda_sync_vmaster_hook);
+
 
 /**
  * snd_hda_mixer_amp_switch_info - Info callback for a standard AMP mixer switch
@@ -5272,6 +5444,10 @@ int snd_hda_suspend(struct hda_bus *bus)
 	list_for_each_entry(codec, &bus->codec_list, list) {
 		if (hda_codec_is_power_on(codec))
 			hda_call_codec_suspend(codec);
+		else /* forcibly change the power to D3 even if not used */
+			hda_set_power_state(codec,
+					    codec->afg ? codec->afg : codec->mfg,
+					    AC_PWRST_D3);
 		if (codec->patch_ops.post_suspend)
 			codec->patch_ops.post_suspend(codec);
 	}

sound/pci/hda/hda_codec.h

@@ -855,6 +855,7 @@ struct hda_codec {
 	unsigned int pins_shutup:1;	/* pins are shut up */
 	unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
 	unsigned int ignore_misc_bit:1; /* ignore MISC_NO_PRESENCE bit */
+	unsigned int no_jack_detect:1;	/* Machine has no jack-detection */
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	unsigned int power_on :1;	/* current (global) power-state */
 	unsigned int power_transition :1; /* power-state in transition */

sound/pci/hda/hda_intel.c

@@ -84,7 +84,7 @@ module_param_array(model, charp, NULL, 0444);
 MODULE_PARM_DESC(model, "Use the given board model.");
 module_param_array(position_fix, int, NULL, 0444);
 MODULE_PARM_DESC(position_fix, "DMA pointer read method."
-		 "(0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO).");
+		 "(0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO, 4 = COMBO).");
 module_param_array(bdl_pos_adj, int, NULL, 0644);
 MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset.");
 module_param_array(probe_mask, int, NULL, 0444);
@@ -94,7 +94,7 @@ MODULE_PARM_DESC(probe_only, "Only probing and no codec initialization.");
 module_param(single_cmd, bool, 0444);
 MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs "
 		 "(for debugging only).");
-module_param(enable_msi, int, 0444);
+module_param(enable_msi, bint, 0444);
 MODULE_PARM_DESC(enable_msi, "Enable Message Signaled Interrupt (MSI)");
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 module_param_array(patch, charp, NULL, 0444);
@@ -121,8 +121,8 @@ module_param(power_save_controller, bool, 0644);
 MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
 #endif
 
-static bool align_buffer_size = 1;
-module_param(align_buffer_size, bool, 0644);
+static int align_buffer_size = -1;
+module_param(align_buffer_size, bint, 0644);
 MODULE_PARM_DESC(align_buffer_size,
 		"Force buffer and period sizes to be multiple of 128 bytes.");
 
@@ -148,6 +148,7 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
 			 "{Intel, PCH},"
 			 "{Intel, CPT},"
 			 "{Intel, PPT},"
+			 "{Intel, LPT},"
 			 "{Intel, PBG},"
 			 "{Intel, SCH},"
 			 "{ATI, SB450},"
@@ -329,6 +330,7 @@ enum {
 	POS_FIX_LPIB,
 	POS_FIX_POSBUF,
 	POS_FIX_VIACOMBO,
+	POS_FIX_COMBO,
 };
 
 /* Defines for ATI HD Audio support in SB450 south bridge */
@@ -515,6 +517,7 @@ enum {
 #define AZX_DCAPS_SYNC_WRITE	(1 << 19)	/* sync each cmd write */
 #define AZX_DCAPS_OLD_SSYNC	(1 << 20)	/* Old SSYNC reg for ICH */
 #define AZX_DCAPS_BUFSIZE	(1 << 21)	/* no buffer size alignment */
+#define AZX_DCAPS_ALIGN_BUFSIZE	(1 << 22)	/* buffer size alignment */
 
 /* quirks for ATI SB / AMD Hudson */
 #define AZX_DCAPS_PRESET_ATI_SB \
@@ -527,7 +530,8 @@ enum {
 
 /* quirks for Nvidia */
 #define AZX_DCAPS_PRESET_NVIDIA \
-	(AZX_DCAPS_NVIDIA_SNOOP | AZX_DCAPS_RIRB_DELAY | AZX_DCAPS_NO_MSI)
+	(AZX_DCAPS_NVIDIA_SNOOP | AZX_DCAPS_RIRB_DELAY | AZX_DCAPS_NO_MSI |\
+	 AZX_DCAPS_ALIGN_BUFSIZE)
 
 static char *driver_short_names[] __devinitdata = {
 	[AZX_DRIVER_ICH] = "HDA Intel",
@@ -2347,17 +2351,6 @@ static void azx_power_notify(struct hda_bus *bus)
  * power management
  */
 
-static int snd_hda_codecs_inuse(struct hda_bus *bus)
-{
-	struct hda_codec *codec;
-
-	list_for_each_entry(codec, &bus->codec_list, list) {
-		if (snd_hda_codec_needs_resume(codec))
-			return 1;
-	}
-	return 0;
-}
-
 static int azx_suspend(struct pci_dev *pci, pm_message_t state)
 {
 	struct snd_card *card = pci_get_drvdata(pci);
@@ -2404,8 +2397,7 @@ static int azx_resume(struct pci_dev *pci)
 		return -EIO;
 	azx_init_pci(chip);
 
-	if (snd_hda_codecs_inuse(chip->bus))
-		azx_init_chip(chip, 1);
+	azx_init_chip(chip, 1);
 
 	snd_hda_resume(chip->bus);
 	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
@@ -2517,6 +2509,7 @@ static int __devinit check_position_fix(struct azx *chip, int fix)
 	case POS_FIX_LPIB:
 	case POS_FIX_POSBUF:
 	case POS_FIX_VIACOMBO:
+	case POS_FIX_COMBO:
 		return fix;
 	}
 
@@ -2696,6 +2689,12 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 
 	chip->position_fix[0] = chip->position_fix[1] =
 		check_position_fix(chip, position_fix[dev]);
+	/* combo mode uses LPIB for playback */
+	if (chip->position_fix[0] == POS_FIX_COMBO) {
+		chip->position_fix[0] = POS_FIX_LPIB;
+		chip->position_fix[1] = POS_FIX_AUTO;
+	}
+
 	check_probe_mask(chip, dev);
 
 	chip->single_cmd = single_cmd;
@@ -2774,9 +2773,16 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
 	}
 
 	/* disable buffer size rounding to 128-byte multiples if supported */
-	chip->align_buffer_size = align_buffer_size;
-	if (chip->driver_caps & AZX_DCAPS_BUFSIZE)
-		chip->align_buffer_size = 0;
+	if (align_buffer_size >= 0)
+		chip->align_buffer_size = !!align_buffer_size;
+	else {
+		if (chip->driver_caps & AZX_DCAPS_BUFSIZE)
+			chip->align_buffer_size = 0;
+		else if (chip->driver_caps & AZX_DCAPS_ALIGN_BUFSIZE)
+			chip->align_buffer_size = 1;
+		else
+			chip->align_buffer_size = 1;
+	}
 
 	/* allow 64bit DMA address if supported by H/W */
 	if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
@@ -2992,6 +2998,10 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
 	{ PCI_DEVICE(0x8086, 0x1e20),
 	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
 	  AZX_DCAPS_BUFSIZE},
+	/* Lynx Point */
+	{ PCI_DEVICE(0x8086, 0x8c20),
+	  .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP |
+	  AZX_DCAPS_BUFSIZE},
 	/* SCH */
 	{ PCI_DEVICE(0x8086, 0x811b),
 	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |

sound/pci/hda/hda_jack.c

@@ -19,6 +19,22 @@
 #include "hda_local.h"
 #include "hda_jack.h"
 
+bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
+{
+	if (codec->no_jack_detect)
+		return false;
+	if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
+		return false;
+	if (!codec->ignore_misc_bit &&
+	    (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
+	     AC_DEFCFG_MISC_NO_PRESENCE))
+		return false;
+	if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
+		return false;
+	return true;
+}
+EXPORT_SYMBOL_HDA(is_jack_detectable);
+
 /* execute pin sense measurement */
 static u32 read_pin_sense(struct hda_codec *codec, hda_nid_t nid)
 {

sound/pci/hda/hda_jack.h

@@ -62,18 +62,7 @@ int snd_hda_jack_detect_enable(struct hda_codec *codec, hda_nid_t nid,
 u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid);
 int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid);
 
-static inline bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid)
-{
-	if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_PRES_DETECT))
-		return false;
-	if (!codec->ignore_misc_bit &&
-	    (get_defcfg_misc(snd_hda_codec_get_pincfg(codec, nid)) &
-	     AC_DEFCFG_MISC_NO_PRESENCE))
-		return false;
-	if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
-		return false;
-	return true;
-}
+bool is_jack_detectable(struct hda_codec *codec, hda_nid_t nid);
 
 int snd_hda_jack_add_kctl(struct hda_codec *codec, hda_nid_t nid,
 			  const char *name, int idx);

sound/pci/hda/hda_local.h

@@ -139,10 +139,36 @@ void snd_hda_set_vmaster_tlv(struct hda_codec *codec, hda_nid_t nid, int dir,
 			     unsigned int *tlv);
 struct snd_kcontrol *snd_hda_find_mixer_ctl(struct hda_codec *codec,
 					    const char *name);
-int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
-			unsigned int *tlv, const char * const *slaves);
+int __snd_hda_add_vmaster(struct hda_codec *codec, char *name,
+			  unsigned int *tlv, const char * const *slaves,
+			  const char *suffix, bool init_slave_vol,
+			  struct snd_kcontrol **ctl_ret);
+#define snd_hda_add_vmaster(codec, name, tlv, slaves, suffix) \
+	__snd_hda_add_vmaster(codec, name, tlv, slaves, suffix, true, NULL)
 int snd_hda_codec_reset(struct hda_codec *codec);
 
+enum {
+	HDA_VMUTE_OFF,
+	HDA_VMUTE_ON,
+	HDA_VMUTE_FOLLOW_MASTER,
+};
+
+struct hda_vmaster_mute_hook {
+	/* below two fields must be filled by the caller of
+	 * snd_hda_add_vmaster_hook() beforehand
+	 */
+	struct snd_kcontrol *sw_kctl;
+	void (*hook)(void *, int);
+	/* below are initialized automatically */
+	unsigned int mute_mode; /* HDA_VMUTE_XXX */
+	struct hda_codec *codec;
+};
+
+int snd_hda_add_vmaster_hook(struct hda_codec *codec,
+			     struct hda_vmaster_mute_hook *hook,
+			     bool expose_enum_ctl);
+void snd_hda_sync_vmaster_hook(struct hda_vmaster_mute_hook *hook);
+
 /* amp value bits */
 #define HDA_AMP_MUTE	0x80
 #define HDA_AMP_UNMUTE	0x00

sound/pci/hda/patch_analog.c

@@ -82,6 +82,7 @@ struct ad198x_spec {
 	unsigned int inv_jack_detect: 1;/* inverted jack-detection */
 	unsigned int inv_eapd: 1;	/* inverted EAPD implementation */
 	unsigned int analog_beep: 1;	/* analog beep input present */
+	unsigned int avoid_init_slave_vol:1;
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	struct hda_loopback_check loopback;
@@ -137,51 +138,17 @@ static int ad198x_init(struct hda_codec *codec)
 	return 0;
 }
 
-static const char * const ad_slave_vols[] = {
-	"Front Playback Volume",
-	"Surround Playback Volume",
-	"Center Playback Volume",
-	"LFE Playback Volume",
-	"Side Playback Volume",
-	"Headphone Playback Volume",
-	"Mono Playback Volume",
-	"Speaker Playback Volume",
-	"IEC958 Playback Volume",
+static const char * const ad_slave_pfxs[] = {
+	"Front", "Surround", "Center", "LFE", "Side",
+	"Headphone", "Mono", "Speaker", "IEC958",
 	NULL
 };
 
-static const char * const ad_slave_sws[] = {
-	"Front Playback Switch",
-	"Surround Playback Switch",
-	"Center Playback Switch",
-	"LFE Playback Switch",
-	"Side Playback Switch",
-	"Headphone Playback Switch",
-	"Mono Playback Switch",
-	"Speaker Playback Switch",
-	"IEC958 Playback Switch",
+static const char * const ad1988_6stack_fp_slave_pfxs[] = {
+	"Front", "Surround", "Center", "LFE", "Side", "IEC958",
 	NULL
 };
 
-static const char * const ad1988_6stack_fp_slave_vols[] = {
-	"Front Playback Volume",
-	"Surround Playback Volume",
-	"Center Playback Volume",
-	"LFE Playback Volume",
-	"Side Playback Volume",
-	"IEC958 Playback Volume",
-	NULL
-};
-
-static const char * const ad1988_6stack_fp_slave_sws[] = {
-	"Front Playback Switch",
-	"Surround Playback Switch",
-	"Center Playback Switch",
-	"LFE Playback Switch",
-	"Side Playback Switch",
-	"IEC958 Playback Switch",
-	NULL
-};
 static void ad198x_free_kctls(struct hda_codec *codec);
 
 #ifdef CONFIG_SND_HDA_INPUT_BEEP
@@ -257,10 +224,12 @@ static int ad198x_build_controls(struct hda_codec *codec)
 		unsigned int vmaster_tlv[4];
 		snd_hda_set_vmaster_tlv(codec, spec->vmaster_nid,
 					HDA_OUTPUT, vmaster_tlv);
-		err = snd_hda_add_vmaster(codec, "Master Playback Volume",
+		err = __snd_hda_add_vmaster(codec, "Master Playback Volume",
 					  vmaster_tlv,
 					  (spec->slave_vols ?
-					   spec->slave_vols : ad_slave_vols));
+					   spec->slave_vols : ad_slave_pfxs),
+					  "Playback Volume",
+					  !spec->avoid_init_slave_vol, NULL);
 		if (err < 0)
 			return err;
 	}
@@ -268,7 +237,8 @@ static int ad198x_build_controls(struct hda_codec *codec)
 		err = snd_hda_add_vmaster(codec, "Master Playback Switch",
 					  NULL,
 					  (spec->slave_sws ?
-					   spec->slave_sws : ad_slave_sws));
+					   spec->slave_sws : ad_slave_pfxs),
+					  "Playback Switch");
 		if (err < 0)
 			return err;
 	}
@@ -3385,8 +3355,8 @@ static int patch_ad1988(struct hda_codec *codec)
 
 	if (spec->autocfg.hp_pins[0]) {
 		spec->mixers[spec->num_mixers++] = ad1988_hp_mixers;
-		spec->slave_vols = ad1988_6stack_fp_slave_vols;
-		spec->slave_sws = ad1988_6stack_fp_slave_sws;
+		spec->slave_vols = ad1988_6stack_fp_slave_pfxs;
+		spec->slave_sws = ad1988_6stack_fp_slave_pfxs;
 		spec->alt_dac_nid = ad1988_alt_dac_nid;
 		spec->stream_analog_alt_playback =
 			&ad198x_pcm_analog_alt_playback;
@@ -3594,16 +3564,8 @@ static const struct hda_amp_list ad1884_loopbacks[] = {
 #endif
 
 static const char * const ad1884_slave_vols[] = {
-	"PCM Playback Volume",
-	"Mic Playback Volume",
-	"Mono Playback Volume",
-	"Front Mic Playback Volume",
-	"Mic Playback Volume",
-	"CD Playback Volume",
-	"Internal Mic Playback Volume",
-	"Docking Mic Playback Volume",
-	/* "Beep Playback Volume", */
-	"IEC958 Playback Volume",
+	"PCM", "Mic", "Mono", "Front Mic", "Mic", "CD",
+	"Internal Mic", "Docking Mic", /* "Beep", */ "IEC958",
 	NULL
 };
 
@@ -3644,6 +3606,8 @@ static int patch_ad1884(struct hda_codec *codec)
 	spec->vmaster_nid = 0x04;
 	/* we need to cover all playback volumes */
 	spec->slave_vols = ad1884_slave_vols;
+	/* slaves may contain input volumes, so we can't raise to 0dB blindly */
+	spec->avoid_init_slave_vol = 1;
 
 	codec->patch_ops = ad198x_patch_ops;
 

sound/pci/hda/patch_conexant.c

@@ -70,6 +70,8 @@ struct conexant_spec {
 	const struct snd_kcontrol_new *mixers[5];
 	int num_mixers;
 	hda_nid_t vmaster_nid;
+	struct hda_vmaster_mute_hook vmaster_mute;
+	bool vmaster_mute_led;
 
 	const struct hda_verb *init_verbs[5];	/* initialization verbs
 						 * don't forget NULL
@@ -465,21 +467,8 @@ static const struct snd_kcontrol_new cxt_beep_mixer[] = {
 };
 #endif
 
-static const char * const slave_vols[] = {
-	"Headphone Playback Volume",
-	"Speaker Playback Volume",
-	"Front Playback Volume",
-	"Surround Playback Volume",
-	"CLFE Playback Volume",
-	NULL
-};
-
-static const char * const slave_sws[] = {
-	"Headphone Playback Switch",
-	"Speaker Playback Switch",
-	"Front Playback Switch",
-	"Surround Playback Switch",
-	"CLFE Playback Switch",
+static const char * const slave_pfxs[] = {
+	"Headphone", "Speaker", "Front", "Surround", "CLFE",
 	NULL
 };
 
@@ -519,14 +508,17 @@ static int conexant_build_controls(struct hda_codec *codec)
 		snd_hda_set_vmaster_tlv(codec, spec->vmaster_nid,
 					HDA_OUTPUT, vmaster_tlv);
 		err = snd_hda_add_vmaster(codec, "Master Playback Volume",
-					  vmaster_tlv, slave_vols);
+					  vmaster_tlv, slave_pfxs,
+					  "Playback Volume");
 		if (err < 0)
 			return err;
 	}
 	if (spec->vmaster_nid &&
 	    !snd_hda_find_mixer_ctl(codec, "Master Playback Switch")) {
-		err = snd_hda_add_vmaster(codec, "Master Playback Switch",
-					  NULL, slave_sws);
+		err = __snd_hda_add_vmaster(codec, "Master Playback Switch",
+					    NULL, slave_pfxs,
+					    "Playback Switch", true,
+					    &spec->vmaster_mute.sw_kctl);
 		if (err < 0)
 			return err;
 	}
@@ -3034,7 +3026,6 @@ static const struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo U350", CXT5066_ASUS),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS),
 	SND_PCI_QUIRK(0x17aa, 0x3938, "Lenovo G565", CXT5066_AUTO),
-	SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */
 	SND_PCI_QUIRK(0x1b0a, 0x2092, "CyberpowerPC Gamer Xplorer N57001", CXT5066_AUTO),
 	{}
 };
@@ -3943,6 +3934,63 @@ static void enable_unsol_pins(struct hda_codec *codec, int num_pins,
 		snd_hda_jack_detect_enable(codec, pins[i], action);
 }
 
+static bool found_in_nid_list(hda_nid_t nid, const hda_nid_t *list, int nums)
+{
+	int i;
+	for (i = 0; i < nums; i++)
+		if (list[i] == nid)
+			return true;
+	return false;
+}
+
+/* is the given NID found in any of autocfg items? */
+static bool found_in_autocfg(struct auto_pin_cfg *cfg, hda_nid_t nid)
+{
+	int i;
+
+	if (found_in_nid_list(nid, cfg->line_out_pins, cfg->line_outs) ||
+	    found_in_nid_list(nid, cfg->hp_pins, cfg->hp_outs) ||
+	    found_in_nid_list(nid, cfg->speaker_pins, cfg->speaker_outs) ||
+	    found_in_nid_list(nid, cfg->dig_out_pins, cfg->dig_outs))
+		return true;
+	for (i = 0; i < cfg->num_inputs; i++)
+		if (cfg->inputs[i].pin == nid)
+			return true;
+	if (cfg->dig_in_pin == nid)
+		return true;
+	return false;
+}
+
+/* clear unsol-event tags on unused pins; Conexant codecs seem to leave
+ * invalid unsol tags by some reason
+ */
+static void clear_unsol_on_unused_pins(struct hda_codec *codec)
+{
+	struct conexant_spec *spec = codec->spec;
+	struct auto_pin_cfg *cfg = &spec->autocfg;
+	int i;
+
+	for (i = 0; i < codec->init_pins.used; i++) {
+		struct hda_pincfg *pin = snd_array_elem(&codec->init_pins, i);
+		if (!found_in_autocfg(cfg, pin->nid))
+			snd_hda_codec_write(codec, pin->nid, 0,
+					    AC_VERB_SET_UNSOLICITED_ENABLE, 0);
+	}
+}
+
+/* turn on/off EAPD according to Master switch */
+static void cx_auto_vmaster_hook(void *private_data, int enabled)
+{
+	struct hda_codec *codec = private_data;
+	struct conexant_spec *spec = codec->spec;
+
+	if (enabled && spec->pin_eapd_ctrls) {
+		cx_auto_update_speakers(codec);
+		return;
+	}
+	cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, enabled);
+}
+
 static void cx_auto_init_output(struct hda_codec *codec)
 {
 	struct conexant_spec *spec = codec->spec;
@@ -3983,6 +4031,7 @@ static void cx_auto_init_output(struct hda_codec *codec)
 	/* turn on all EAPDs if no individual EAPD control is available */
 	if (!spec->pin_eapd_ctrls)
 		cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, true);
+	clear_unsol_on_unused_pins(codec);
 }
 
 static void cx_auto_init_input(struct hda_codec *codec)
@@ -4046,11 +4095,13 @@ static void cx_auto_init_digital(struct hda_codec *codec)
 
 static int cx_auto_init(struct hda_codec *codec)
 {
+	struct conexant_spec *spec = codec->spec;
 	/*snd_hda_sequence_write(codec, cx_auto_init_verbs);*/
 	cx_auto_init_output(codec);
 	cx_auto_init_input(codec);
 	cx_auto_init_digital(codec);
 	snd_hda_jack_report_sync(codec);
+	snd_hda_sync_vmaster_hook(&spec->vmaster_mute);
 	return 0;
 }
 
@@ -4296,6 +4347,13 @@ static int cx_auto_build_controls(struct hda_codec *codec)
 	err = snd_hda_jack_add_kctls(codec, &spec->autocfg);
 	if (err < 0)
 		return err;
+	if (spec->vmaster_mute.sw_kctl) {
+		spec->vmaster_mute.hook = cx_auto_vmaster_hook;
+		err = snd_hda_add_vmaster_hook(codec, &spec->vmaster_mute,
+					       spec->vmaster_mute_led);
+		if (err < 0)
+			return err;
+	}
 	return 0;
 }
 
@@ -4320,7 +4378,6 @@ static int cx_auto_search_adcs(struct hda_codec *codec)
 	return 0;
 }
 
-
 static const struct hda_codec_ops cx_auto_patch_ops = {
 	.build_controls = cx_auto_build_controls,
 	.build_pcms = conexant_build_pcms,
@@ -4368,6 +4425,7 @@ static const struct cxt_pincfg cxt_pincfg_lenovo_x200[] = {
 	{ 0x16, 0x042140ff }, /* HP (seq# overridden) */
 	{ 0x17, 0x21a11000 }, /* dock-mic */
 	{ 0x19, 0x2121103f }, /* dock-HP */
+	{ 0x1c, 0x21440100 }, /* dock SPDIF out */
 	{}
 };
 
@@ -4421,6 +4479,18 @@ static int patch_conexant_auto(struct hda_codec *codec)
 
 	apply_pin_fixup(codec, cxt_fixups, cxt_pincfg_tbl);
 
+	/* Show mute-led control only on HP laptops
+	 * This is a sort of white-list: on HP laptops, EAPD corresponds
+	 * only to the mute-LED without actualy amp function.  Meanwhile,
+	 * others may use EAPD really as an amp switch, so it might be
+	 * not good to expose it blindly.
+	 */
+	switch (codec->subsystem_id >> 16) {
+	case 0x103c:
+		spec->vmaster_mute_led = 1;
+		break;
+	}
+
 	err = cx_auto_search_adcs(codec);
 	if (err < 0)
 		return err;
@@ -4434,6 +4504,18 @@ static int patch_conexant_auto(struct hda_codec *codec)
 	codec->patch_ops = cx_auto_patch_ops;
 	if (spec->beep_amp)
 		snd_hda_attach_beep_device(codec, spec->beep_amp);
+
+	/* Some laptops with Conexant chips show stalls in S3 resume,
+	 * which falls into the single-cmd mode.
+	 * Better to make reset, then.
+	 */
+	if (!codec->bus->sync_write) {
+		snd_printd("hda_codec: "
+			   "Enable sync_write for stable communication\n");
+		codec->bus->sync_write = 1;
+		codec->bus->allow_bus_reset = 1;
+	}
+
 	return 0;
 }
 

sound/pci/hda/patch_hdmi.c

@@ -1912,6 +1912,7 @@ static const struct hda_codec_preset snd_hda_preset_hdmi[] = {
 { .id = 0x80862804, .name = "IbexPeak HDMI",	.patch = patch_generic_hdmi },
 { .id = 0x80862805, .name = "CougarPoint HDMI",	.patch = patch_generic_hdmi },
 { .id = 0x80862806, .name = "PantherPoint HDMI", .patch = patch_generic_hdmi },
+{ .id = 0x80862880, .name = "CedarTrail HDMI",	.patch = patch_generic_hdmi },
 { .id = 0x808629fb, .name = "Crestline HDMI",	.patch = patch_generic_hdmi },
 {} /* terminator */
 };
@@ -1958,6 +1959,7 @@ MODULE_ALIAS("snd-hda-codec-id:80862803");
 MODULE_ALIAS("snd-hda-codec-id:80862804");
 MODULE_ALIAS("snd-hda-codec-id:80862805");
 MODULE_ALIAS("snd-hda-codec-id:80862806");
+MODULE_ALIAS("snd-hda-codec-id:80862880");
 MODULE_ALIAS("snd-hda-codec-id:808629fb");
 
 MODULE_LICENSE("GPL");

sound/pci/hda/patch_sigmatel.c

@@ -99,6 +99,7 @@ enum {
 	STAC_DELL_VOSTRO_3500,
 	STAC_92HD83XXX_HP_cNB11_INTQUAD,
 	STAC_HP_DV7_4000,
+	STAC_HP_ZEPHYR,
 	STAC_92HD83XXX_MODELS
 };
 
@@ -309,6 +310,8 @@ struct sigmatel_spec {
 	unsigned long auto_capvols[MAX_ADCS_NUM];
 	unsigned auto_dmic_cnt;
 	hda_nid_t auto_dmic_nids[MAX_DMICS_NUM];
+
+	struct hda_vmaster_mute_hook vmaster_mute;
 };
 
 static const hda_nid_t stac9200_adc_nids[1] = {
@@ -662,7 +665,6 @@ static int stac92xx_smux_enum_put(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
-#ifdef CONFIG_SND_HDA_POWER_SAVE
 static int stac_vrefout_set(struct hda_codec *codec,
 					hda_nid_t nid, unsigned int new_vref)
 {
@@ -686,7 +688,6 @@ static int stac_vrefout_set(struct hda_codec *codec,
 
 	return 1;
 }
-#endif
 
 static unsigned int stac92xx_vref_set(struct hda_codec *codec,
 					hda_nid_t nid, unsigned int new_vref)
@@ -894,6 +895,13 @@ static const struct hda_verb stac92hd83xxx_core_init[] = {
 	{}
 };
 
+static const struct hda_verb stac92hd83xxx_hp_zephyr_init[] = {
+	{ 0x22, 0x785, 0x43 },
+	{ 0x22, 0x782, 0xe0 },
+	{ 0x22, 0x795, 0x00 },
+	{}
+};
+
 static const struct hda_verb stac92hd71bxx_core_init[] = {
 	/* set master volume and direct control */
 	{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
@@ -999,8 +1007,8 @@ static const struct hda_verb stac9205_core_init[] = {
 	}
 
 static const struct snd_kcontrol_new stac9200_mixer[] = {
-	HDA_CODEC_VOLUME_MIN_MUTE("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME_MIN_MUTE("PCM Playback Volume", 0xb, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("PCM Playback Switch", 0xb, 0, HDA_OUTPUT),
 	HDA_CODEC_VOLUME("Capture Volume", 0x0a, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x0a, 0, HDA_OUTPUT),
 	{ } /* end */
@@ -1027,8 +1035,8 @@ static const struct snd_kcontrol_new stac92hd71bxx_loopback[] = {
 };
 
 static const struct snd_kcontrol_new stac925x_mixer[] = {
-	HDA_CODEC_VOLUME_MIN_MUTE("Master Playback Volume", 0xe, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME_MIN_MUTE("PCM Playback Volume", 0xe, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("PCM Playback Switch", 0x0e, 0, HDA_OUTPUT),
 	{ } /* end */
 };
 
@@ -1060,34 +1068,25 @@ static struct snd_kcontrol_new stac_smux_mixer = {
 	.put = stac92xx_smux_enum_put,
 };
 
-static const char * const slave_vols[] = {
-	"Front Playback Volume",
-	"Surround Playback Volume",
-	"Center Playback Volume",
-	"LFE Playback Volume",
-	"Side Playback Volume",
-	"Headphone Playback Volume",
-	"Speaker Playback Volume",
+static const char * const slave_pfxs[] = {
+	"Front", "Surround", "Center", "LFE", "Side",
+	"Headphone", "Speaker", "IEC958",
 	NULL
 };
 
-static const char * const slave_sws[] = {
-	"Front Playback Switch",
-	"Surround Playback Switch",
-	"Center Playback Switch",
-	"LFE Playback Switch",
-	"Side Playback Switch",
-	"Headphone Playback Switch",
-	"Speaker Playback Switch",
-	"IEC958 Playback Switch",
-	NULL
-};
+static void stac92xx_update_led_status(struct hda_codec *codec, int enabled);
+
+static void stac92xx_vmaster_hook(void *private_data, int val)
+{
+	stac92xx_update_led_status(private_data, val);
+}
 
 static void stac92xx_free_kctls(struct hda_codec *codec);
 
 static int stac92xx_build_controls(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec = codec->spec;
+	unsigned int vmaster_tlv[4];
 	int err;
 	int i;
 
@@ -1144,22 +1143,28 @@ static int stac92xx_build_controls(struct hda_codec *codec)
 	}
 
 	/* if we have no master control, let's create it */
-	if (!snd_hda_find_mixer_ctl(codec, "Master Playback Volume")) {
-		unsigned int vmaster_tlv[4];
-		snd_hda_set_vmaster_tlv(codec, spec->multiout.dac_nids[0],
-					HDA_OUTPUT, vmaster_tlv);
-		/* correct volume offset */
-		vmaster_tlv[2] += vmaster_tlv[3] * spec->volume_offset;
-		/* minimum value is actually mute */
-		vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;
-		err = snd_hda_add_vmaster(codec, "Master Playback Volume",
-					  vmaster_tlv, slave_vols);
-		if (err < 0)
-			return err;
-	}
-	if (!snd_hda_find_mixer_ctl(codec, "Master Playback Switch")) {
-		err = snd_hda_add_vmaster(codec, "Master Playback Switch",
-					  NULL, slave_sws);
+	snd_hda_set_vmaster_tlv(codec, spec->multiout.dac_nids[0],
+				HDA_OUTPUT, vmaster_tlv);
+	/* correct volume offset */
+	vmaster_tlv[2] += vmaster_tlv[3] * spec->volume_offset;
+	/* minimum value is actually mute */
+	vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;
+	err = snd_hda_add_vmaster(codec, "Master Playback Volume",
+				  vmaster_tlv, slave_pfxs,
+				  "Playback Volume");
+	if (err < 0)
+		return err;
+
+	err = __snd_hda_add_vmaster(codec, "Master Playback Switch",
+				    NULL, slave_pfxs,
+				    "Playback Switch", true,
+				    &spec->vmaster_mute.sw_kctl);
+	if (err < 0)
+		return err;
+
+	if (spec->gpio_led) {
+		spec->vmaster_mute.hook = stac92xx_vmaster_hook;
+		err = snd_hda_add_vmaster_hook(codec, &spec->vmaster_mute, true);
 		if (err < 0)
 			return err;
 	}
@@ -1636,6 +1641,12 @@ static const unsigned int hp_dv7_4000_pin_configs[10] = {
 	0x40f000f0, 0x40f000f0,
 };
 
+static const unsigned int hp_zephyr_pin_configs[10] = {
+	0x01813050, 0x0421201f, 0x04a1205e, 0x96130310,
+	0x96130310, 0x0101401f, 0x1111611f, 0xd5a30130,
+	0, 0,
+};
+
 static const unsigned int hp_cNB11_intquad_pin_configs[10] = {
 	0x40f000f0, 0x0221101f, 0x02a11020, 0x92170110,
 	0x40f000f0, 0x92170110, 0x40f000f0, 0xd5a30130,
@@ -1649,6 +1660,7 @@ static const unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = {
 	[STAC_DELL_VOSTRO_3500] = dell_vostro_3500_pin_configs,
 	[STAC_92HD83XXX_HP_cNB11_INTQUAD] = hp_cNB11_intquad_pin_configs,
 	[STAC_HP_DV7_4000] = hp_dv7_4000_pin_configs,
+	[STAC_HP_ZEPHYR] = hp_zephyr_pin_configs,
 };
 
 static const char * const stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = {
@@ -1659,6 +1671,7 @@ static const char * const stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = {
 	[STAC_DELL_VOSTRO_3500] = "dell-vostro-3500",
 	[STAC_92HD83XXX_HP_cNB11_INTQUAD] = "hp_cNB11_intquad",
 	[STAC_HP_DV7_4000] = "hp-dv7-4000",
+	[STAC_HP_ZEPHYR] = "hp-zephyr",
 };
 
 static const struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
@@ -1711,6 +1724,14 @@ static const struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
 			  "HP", STAC_92HD83XXX_HP_cNB11_INTQUAD),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3593,
 			  "HP", STAC_92HD83XXX_HP_cNB11_INTQUAD),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3561,
+			  "HP", STAC_HP_ZEPHYR),
+	{} /* terminator */
+};
+
+static const struct snd_pci_quirk stac92hd83xxx_codec_id_cfg_tbl[] = {
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3561,
+			  "HP", STAC_HP_ZEPHYR),
 	{} /* terminator */
 };
 
@@ -4410,8 +4431,7 @@ static int stac92xx_init(struct hda_codec *codec)
 	snd_hda_jack_report_sync(codec);
 
 	/* sync mute LED */
-	if (spec->gpio_led)
-		hda_call_check_power_status(codec, 0x01);
+	snd_hda_sync_vmaster_hook(&spec->vmaster_mute);
 	if (spec->dac_list)
 		stac92xx_power_down(codec);
 	return 0;
@@ -4989,7 +5009,6 @@ static int stac92xx_suspend(struct hda_codec *codec, pm_message_t state)
 	return 0;
 }
 
-#ifdef CONFIG_SND_HDA_POWER_SAVE
 static int stac92xx_pre_resume(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec = codec->spec;
@@ -5024,82 +5043,40 @@ static void stac92xx_set_power_state(struct hda_codec *codec, hda_nid_t fg,
 			afg_power_state);
 	snd_hda_codec_set_power_to_all(codec, fg, power_state, true);
 }
+#else
+#define stac92xx_suspend	NULL
+#define stac92xx_resume		NULL
+#define stac92xx_pre_resume	NULL
+#define stac92xx_set_power_state NULL
+#endif /* CONFIG_PM */
 
-/*
- * For this feature CONFIG_SND_HDA_POWER_SAVE is needed
- * as mute LED state is updated in check_power_status hook
- */
-static int stac92xx_update_led_status(struct hda_codec *codec)
+/* update mute-LED accoring to the master switch */
+static void stac92xx_update_led_status(struct hda_codec *codec, int enabled)
 {
 	struct sigmatel_spec *spec = codec->spec;
-	int i, num_ext_dacs, muted = 1;
-	unsigned int muted_lvl, notmtd_lvl;
-	hda_nid_t nid;
+	int muted = !enabled;
 
 	if (!spec->gpio_led)
-		return 0;
+		return;
+
+	/* LED state is inverted on these systems */
+	if (spec->gpio_led_polarity)
+		muted = !muted;
 
-	for (i = 0; i < spec->multiout.num_dacs; i++) {
-		nid = spec->multiout.dac_nids[i];
-		if (!(snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) &
-		      HDA_AMP_MUTE)) {
-			muted = 0; /* something heard */
-			break;
-		}
-	}
-	if (muted && spec->multiout.hp_nid)
-		if (!(snd_hda_codec_amp_read(codec,
-				spec->multiout.hp_nid, 0, HDA_OUTPUT, 0) &
-					HDA_AMP_MUTE)) {
-			muted = 0; /* HP is not muted */
-		}
-	num_ext_dacs = ARRAY_SIZE(spec->multiout.extra_out_nid);
-	for (i = 0; muted && i < num_ext_dacs; i++) {
-		nid = spec->multiout.extra_out_nid[i];
-		if (nid == 0)
-			break;
-		if (!(snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) &
-		      HDA_AMP_MUTE)) {
-			muted = 0; /* extra output is not muted */
-		}
-	}
 	/*polarity defines *not* muted state level*/
 	if (!spec->vref_mute_led_nid) {
 		if (muted)
 			spec->gpio_data &= ~spec->gpio_led; /* orange */
 		else
 			spec->gpio_data |= spec->gpio_led; /* white */
-
-		if (!spec->gpio_led_polarity) {
-			/* LED state is inverted on these systems */
-			spec->gpio_data ^= spec->gpio_led;
-		}
 		stac_gpio_set(codec, spec->gpio_mask,
 				spec->gpio_dir, spec->gpio_data);
 	} else {
-		notmtd_lvl = spec->gpio_led_polarity ?
-				AC_PINCTL_VREF_50 : AC_PINCTL_VREF_GRD;
-		muted_lvl = spec->gpio_led_polarity ?
-				AC_PINCTL_VREF_GRD : AC_PINCTL_VREF_50;
-		spec->vref_led = muted ? muted_lvl : notmtd_lvl;
+		spec->vref_led = muted ? AC_PINCTL_VREF_50 : AC_PINCTL_VREF_GRD;
 		stac_vrefout_set(codec,	spec->vref_mute_led_nid,
 				 spec->vref_led);
 	}
-	return 0;
-}
-
-/*
- * use power check for controlling mute led of HP notebooks
- */
-static int stac92xx_check_power_status(struct hda_codec *codec,
-					      hda_nid_t nid)
-{
-	stac92xx_update_led_status(codec);
-
-	return 0;
 }
-#endif /* CONFIG_SND_HDA_POWER_SAVE */
-#endif /* CONFIG_PM */
 
 static const struct hda_codec_ops stac92xx_patch_ops = {
 	.build_controls = stac92xx_build_controls,
@@ -5580,6 +5557,12 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
 							STAC_92HD83XXX_MODELS,
 							stac92hd83xxx_models,
 							stac92hd83xxx_cfg_tbl);
+	/* check codec subsystem id if not found */
+	if (spec->board_config < 0)
+		spec->board_config =
+			snd_hda_check_board_codec_sid_config(codec,
+				STAC_92HD83XXX_MODELS, stac92hd83xxx_models,
+				stac92hd83xxx_codec_id_cfg_tbl);
 again:
 	if (spec->board_config < 0)
 		snd_printdd(KERN_INFO "hda_codec: %s: BIOS auto-probing.\n",
@@ -5590,12 +5573,17 @@ again:
 
 	codec->patch_ops = stac92xx_patch_ops;
 
+	switch (spec->board_config) {
+	case STAC_HP_ZEPHYR:
+		spec->init = stac92hd83xxx_hp_zephyr_init;
+		break;
+	}
+
 	if (find_mute_led_cfg(codec, -1/*no default cfg*/))
 		snd_printd("mute LED gpio %d polarity %d\n",
 				spec->gpio_led,
 				spec->gpio_led_polarity);
 
-#ifdef CONFIG_SND_HDA_POWER_SAVE
 	if (spec->gpio_led) {
 		if (!spec->vref_mute_led_nid) {
 			spec->gpio_mask |= spec->gpio_led;
@@ -5605,11 +5593,10 @@ again:
 			codec->patch_ops.set_power_state =
 					stac92xx_set_power_state;
 		}
+#ifdef CONFIG_PM
 		codec->patch_ops.pre_resume = stac92xx_pre_resume;
-		codec->patch_ops.check_power_status =
-			stac92xx_check_power_status;
+#endif
 	}
-#endif	
 
 	err = stac92xx_parse_auto_config(codec);
 	if (!err) {
@@ -5906,7 +5893,6 @@ again:
 				spec->gpio_led,
 				spec->gpio_led_polarity);
 
-#ifdef CONFIG_SND_HDA_POWER_SAVE
 	if (spec->gpio_led) {
 		if (!spec->vref_mute_led_nid) {
 			spec->gpio_mask |= spec->gpio_led;
@@ -5916,11 +5902,10 @@ again:
 			codec->patch_ops.set_power_state =
 					stac92xx_set_power_state;
 		}
+#ifdef CONFIG_PM
 		codec->patch_ops.pre_resume = stac92xx_pre_resume;
-		codec->patch_ops.check_power_status =
-			stac92xx_check_power_status;
+#endif
 	}
-#endif	
 
 	spec->multiout.dac_nids = spec->dac_nids;
 

sound/pci/hda/patch_via.c

@@ -550,7 +550,10 @@ static void via_auto_init_output(struct hda_codec *codec,
 	pin = path->path[path->depth - 1];
 
 	init_output_pin(codec, pin, pin_type);
-	caps = query_amp_caps(codec, pin, HDA_OUTPUT);
+	if (get_wcaps(codec, pin) & AC_WCAP_OUT_AMP)
+		caps = query_amp_caps(codec, pin, HDA_OUTPUT);
+	else
+		caps = 0;
 	if (caps & AC_AMPCAP_MUTE) {
 		unsigned int val;
 		val = (caps & AC_AMPCAP_OFFSET) >> AC_AMPCAP_OFFSET_SHIFT;
@@ -645,6 +648,10 @@ static void via_auto_init_analog_input(struct hda_codec *codec)
 
 	/* init ADCs */
 	for (i = 0; i < spec->num_adc_nids; i++) {
+		hda_nid_t nid = spec->adc_nids[i];
+		if (!(get_wcaps(codec, nid) & AC_WCAP_IN_AMP) ||
+		    !(query_amp_caps(codec, nid, HDA_INPUT) & AC_AMPCAP_MUTE))
+			continue;
 		snd_hda_codec_write(codec, spec->adc_nids[i], 0,
 				    AC_VERB_SET_AMP_GAIN_MUTE,
 				    AMP_IN_UNMUTE(0));
@@ -1445,25 +1452,9 @@ static const struct hda_pcm_stream via_pcm_digital_capture = {
 /*
  * slave controls for virtual master
  */
-static const char * const via_slave_vols[] = {
-	"Front Playback Volume",
-	"Surround Playback Volume",
-	"Center Playback Volume",
-	"LFE Playback Volume",
-	"Side Playback Volume",
-	"Headphone Playback Volume",
-	"Speaker Playback Volume",
-	NULL,
-};
-
-static const char * const via_slave_sws[] = {
-	"Front Playback Switch",
-	"Surround Playback Switch",
-	"Center Playback Switch",
-	"LFE Playback Switch",
-	"Side Playback Switch",
-	"Headphone Playback Switch",
-	"Speaker Playback Switch",
+static const char * const via_slave_pfxs[] = {
+	"Front", "Surround", "Center", "LFE", "Side",
+	"Headphone", "Speaker",
 	NULL,
 };
 
@@ -1508,13 +1499,15 @@ static int via_build_controls(struct hda_codec *codec)
 		snd_hda_set_vmaster_tlv(codec, spec->multiout.dac_nids[0],
 					HDA_OUTPUT, vmaster_tlv);
 		err = snd_hda_add_vmaster(codec, "Master Playback Volume",
-					  vmaster_tlv, via_slave_vols);
+					  vmaster_tlv, via_slave_pfxs,
+					  "Playback Volume");
 		if (err < 0)
 			return err;
 	}
 	if (!snd_hda_find_mixer_ctl(codec, "Master Playback Switch")) {
 		err = snd_hda_add_vmaster(codec, "Master Playback Switch",
-					  NULL, via_slave_sws);
+					  NULL, via_slave_pfxs,
+					  "Playback Switch");
 		if (err < 0)
 			return err;
 	}
@@ -1522,6 +1515,8 @@ static int via_build_controls(struct hda_codec *codec)
 	/* assign Capture Source enums to NID */
 	kctl = snd_hda_find_mixer_ctl(codec, "Input Source");
 	for (i = 0; kctl && i < kctl->count; i++) {
+		if (!spec->mux_nids[i])
+			continue;
 		err = snd_hda_add_nid(codec, kctl, i, spec->mux_nids[i]);
 		if (err < 0)
 			return err;
@@ -2488,6 +2483,8 @@ static int create_mic_boost_ctls(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
 	const struct auto_pin_cfg *cfg = &spec->autocfg;
+	const char *prev_label = NULL;
+	int type_idx = 0;
 	int i, err;
 
 	for (i = 0; i < cfg->num_inputs; i++) {
@@ -2502,8 +2499,13 @@ static int create_mic_boost_ctls(struct hda_codec *codec)
 		if (caps == -1 || !(caps & AC_AMPCAP_NUM_STEPS))
 			continue;
 		label = hda_get_autocfg_input_label(codec, cfg, i);
+		if (prev_label && !strcmp(label, prev_label))
+			type_idx++;
+		else
+			type_idx = 0;
+		prev_label = label;
 		snprintf(name, sizeof(name), "%s Boost Volume", label);
-		err = via_add_control(spec, VIA_CTL_WIDGET_VOL, name,
+		err = __via_add_control(spec, VIA_CTL_WIDGET_VOL, name, type_idx,
 			      HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_INPUT));
 		if (err < 0)
 			return err;