Merge branch 'linus' into tracing/hw-branch-tracing

Documentation/kernel-parameters.txt

@@ -221,14 +221,17 @@ and is between 256 and 4096 characters. It is defined in the file
 			Bits in debug_level correspond to a level in
 			ACPI_DEBUG_PRINT statements, e.g.,
 			    ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
-			See Documentation/acpi/debug.txt for more information
-			about debug layers and levels.
+			The debug_level mask defaults to "info".  See
+			Documentation/acpi/debug.txt for more information about
+			debug layers and levels.
 
+			Enable processor driver info messages:
+			    acpi.debug_layer=0x20000000
+			Enable PCI/PCI interrupt routing info messages:
+			    acpi.debug_layer=0x400000
 			Enable AML "Debug" output, i.e., stores to the Debug
 			object while interpreting AML:
 			    acpi.debug_layer=0xffffffff acpi.debug_level=0x2
-			Enable PCI/PCI interrupt routing info messages:
-			    acpi.debug_layer=0x400000 acpi.debug_level=0x4
 			Enable all messages related to ACPI hardware:
 			    acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
 

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1063,6 +1063,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
 	STAC9227/9228/9229/927x
 	  ref		Reference board
+	  ref-no-jd	Reference board without HP/Mic jack detection
 	  3stack	D965 3stack
 	  5stack	D965 5stack + SPDIF
 	  dell-3stack	Dell Dimension E520
@@ -1076,6 +1077,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
 	STAC92HD73*
 	  ref		Reference board
+	  no-jd		BIOS setup but without jack-detection
 	  dell-m6-amic	Dell desktops/laptops with analog mics
 	  dell-m6-dmic	Dell desktops/laptops with digital mics
 	  dell-m6	Dell desktops/laptops with both type of mics

MAINTAINERS

@@ -2191,9 +2191,9 @@ S:	Supported
 
 INOTIFY
 P:	John McCutchan
-M:	ttb@tentacle.dhs.org
+M:	john@johnmccutchan.com
 P:	Robert Love
-M:	rml@novell.com
+M:	rlove@rlove.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
@@ -4529,7 +4529,7 @@ S:	Maintained
 USB VIDEO CLASS
 P:	Laurent Pinchart
 M:	laurent.pinchart@skynet.be
-L:	linux-uvc-devel@lists.berlios.de
+L:	linux-uvc-devel@lists.berlios.de (subscribers-only)
 L:	video4linux-list@redhat.com
 W:	http://linux-uvc.berlios.de
 S:	Maintained

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc8
+EXTRAVERSION = -rc9
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*

arch/avr32/boards/favr-32/flash.c

@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,

arch/avr32/boards/favr-32/setup.c

@@ -25,10 +25,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/init.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/init.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {

arch/avr32/boot/images/Makefile

@@ -10,7 +10,7 @@ MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
 
 extra-y		:= vmlinux.bin vmlinux.gz
 
-OBJCOPYFLAGS_vmlinux.bin := -O binary
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 

arch/avr32/configs/atstk1006_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug  5 15:40:26 2008
+# Linux kernel version: 2.6.28-rc8
+# Thu Dec 18 11:22:23 2008
 #
 CONFIG_AVR32=y
 CONFIG_GENERIC_GPIO=y
@@ -67,6 +67,7 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
@@ -77,15 +78,8 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -118,6 +112,7 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type and features
@@ -134,6 +129,8 @@ CONFIG_CPU_AT32AP700X=y
 CONFIG_CPU_AT32AP7000=y
 CONFIG_BOARD_ATSTK1000=y
 # CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MIMC200 is not set
 # CONFIG_BOARD_ATSTK1002 is not set
 # CONFIG_BOARD_ATSTK1003 is not set
 # CONFIG_BOARD_ATSTK1004 is not set
@@ -171,14 +168,14 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_NR_QUICK=2
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_NMI_DEBUGGING=y
 # CONFIG_HZ_100 is not set
@@ -186,7 +183,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_CMDLINE=""
 
 #
@@ -228,6 +225,8 @@ CONFIG_CPU_FREQ_AT32AP=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 CONFIG_NET=y
 
@@ -299,6 +298,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -321,14 +321,8 @@ CONFIG_LLC=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -359,6 +353,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_HAVE_MTD_OTP=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
@@ -407,6 +402,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # Self-contained MTD device drivers
 #
 CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+CONFIG_MTD_DATAFLASH_OTP=y
 CONFIG_MTD_M25P80=m
 CONFIG_M25PXX_USE_FAST_READ=y
 # CONFIG_MTD_SLRAM is not set
@@ -464,9 +461,10 @@ CONFIG_ATMEL_TCLIB=y
 CONFIG_ATMEL_TCB_CLKSRC=y
 CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 CONFIG_ATMEL_SSC=m
 # CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
 
 #
 # SCSI device support
@@ -548,6 +546,9 @@ CONFIG_MACB=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -653,6 +654,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=m
 
 #
@@ -716,6 +718,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 CONFIG_GPIO_SYSFS=y
 
+#
+# Memory mapped GPIO expanders:
+#
+
 #
 # I2C GPIO expanders:
 #
@@ -745,11 +751,11 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_AT32AP700X_WDT=y
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -758,6 +764,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -783,6 +793,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -804,10 +815,13 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_LTV350QV=y
 # CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
 # CONFIG_LCD_VGG2432A4 is not set
 # CONFIG_LCD_PLATFORM is not set
 # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
@@ -818,6 +832,7 @@ CONFIG_LCD_LTV350QV=y
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -848,28 +863,32 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 CONFIG_USB_GADGET_ATMEL_USBA=y
 CONFIG_USB_ATMEL_USBA=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_ZERO=m
@@ -887,7 +906,7 @@ CONFIG_MMC=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
@@ -895,10 +914,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
 CONFIG_MMC_SPI=m
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -918,6 +938,7 @@ CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
 # CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
@@ -950,25 +971,31 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_M41T94 is not set
 # CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -989,6 +1016,8 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_NET_DMA is not set
 CONFIG_DMATEST=m
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
 
 #
 # File systems
@@ -998,12 +1027,17 @@ CONFIG_EXT2_FS=m
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+# CONFIG_EXT4_FS_XATTR is not set
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_DNOTIFY is not set
@@ -1036,6 +1070,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
@@ -1054,7 +1089,8 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
@@ -1088,6 +1124,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1185,10 +1222,21 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 
 #
@@ -1196,17 +1244,26 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1257,7 +1314,7 @@ CONFIG_CRYPTO_SHA1=m
 #
 # Ciphers
 #
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -1278,14 +1335,17 @@ CONFIG_CRYPTO_DES=m
 #
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=m

arch/avr32/mach-at32ap/at32ap700x.c

@@ -967,28 +967,28 @@ static inline void configure_usart0_pins(void)
 {
 	u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
 
-	select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+	select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart1_pins(void)
 {
 	u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
 
-	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+	select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart2_pins(void)
 {
 	u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
 
-	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart3_pins(void)
 {
 	u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
 
-	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static struct platform_device *__initdata at32_usarts[4];

arch/mips/include/asm/byteorder.h

@@ -50,9 +50,8 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 {
 	__asm__(
-	"	dsbh	%0, %1			\n"
-	"	dshd	%0, %0			\n"
-	"	drotr	%0, %0, 32		\n"
+	"	dsbh	%0, %1\n"
+	"	dshd	%0, %0"
 	: "=r" (x)
 	: "r" (x));
 

arch/mips/include/asm/elf.h

@@ -232,7 +232,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
  */
 #ifdef __MIPSEB__
 #define ELF_DATA	ELFDATA2MSB
-#elif __MIPSEL__
+#elif defined(__MIPSEL__)
 #define ELF_DATA	ELFDATA2LSB
 #endif
 #define ELF_ARCH	EM_MIPS

arch/parisc/include/asm/tlbflush.h

@@ -44,9 +44,12 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
 {
 	BUG_ON(mm == &init_mm); /* Should never happen */
 
-#ifdef CONFIG_SMP
+#if 1 || defined(CONFIG_SMP)
 	flush_tlb_all();
 #else
+	/* FIXME: currently broken, causing space id and protection ids
+	 *  to go out of sync, resulting in faults on userspace accesses.
+	 */
 	if (mm) {
 		if (mm->context != 0)
 			free_sid(mm->context);

arch/sparc/include/asm/ptrace_32.h

@@ -62,6 +62,8 @@ struct sparc_stackf {
 
 #ifdef __KERNEL__
 
+#include <asm/system.h>
+
 static inline bool pt_regs_is_syscall(struct pt_regs *regs)
 {
 	return (regs->psr & PSR_SYSCALL);
@@ -72,6 +74,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
 	return (regs->psr &= ~PSR_SYSCALL);
 }
 
+#define arch_ptrace_stop_needed(exit_code, info) \
+({	flush_user_windows(); \
+	current_thread_info()->w_saved != 0;	\
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+	synchronize_user_stack()
+
 #define user_mode(regs) (!((regs)->psr & PSR_PS))
 #define instruction_pointer(regs) ((regs)->pc)
 #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])

arch/sparc/include/asm/ptrace_64.h

@@ -114,6 +114,7 @@ struct sparc_trapf {
 #ifdef __KERNEL__
 
 #include <linux/threads.h>
+#include <asm/system.h>
 
 static inline int pt_regs_trap_type(struct pt_regs *regs)
 {
@@ -130,6 +131,14 @@ static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
 	return (regs->tstate &= ~TSTATE_SYSCALL);
 }
 
+#define arch_ptrace_stop_needed(exit_code, info) \
+({	flush_user_windows(); \
+	get_thread_wsaved() != 0; \
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+	synchronize_user_stack()
+
 struct global_reg_snapshot {
 	unsigned long		tstate;
 	unsigned long		tpc;

arch/x86/Kconfig.cpu

@@ -521,6 +521,7 @@ config X86_PTRACE_BTS
 	bool "Branch Trace Store"
 	default y
 	depends on X86_DEBUGCTLMSR
+	depends on BROKEN
 	help
 	  This adds a ptrace interface to the hardware's branch trace store.
 

arch/x86/kernel/amd_iommu.c

@@ -235,8 +235,9 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
 	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
 
-	if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
-		printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+	if (unlikely(i == EXIT_LOOP_COUNT))
+		panic("AMD IOMMU: Completion wait loop failed\n");
+
 out:
 	spin_unlock_irqrestore(&iommu->lock, flags);
 

arch/x86/kernel/amd_iommu_init.c

@@ -427,6 +427,10 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
 			&entry, sizeof(entry));
 
+	/* set head and tail to zero manually */
+	writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+	writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
 	iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
 
 	return cmd_buf;
@@ -1074,7 +1078,8 @@ int __init amd_iommu_init(void)
 		goto free;
 
 	/* IOMMU rlookup table - find the IOMMU for a specific device */
-	amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL,
+	amd_iommu_rlookup_table = (void *)__get_free_pages(
+			GFP_KERNEL | __GFP_ZERO,
 			get_order(rlookup_table_size));
 	if (amd_iommu_rlookup_table == NULL)
 		goto free;

arch/x86/kernel/cpu/mcheck/mce_64.c

@@ -510,12 +510,9 @@ static void __cpuinit mce_cpu_features(struct cpuinfo_x86 *c)
  */
 void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
 {
-	static cpumask_t mce_cpus = CPU_MASK_NONE;
-
 	mce_cpu_quirks(c);
 
 	if (mce_dont_init ||
-	    cpu_test_and_set(smp_processor_id(), mce_cpus) ||
 	    !mce_available(c))
 		return;
 

arch/x86/kernel/microcode_core.c

@@ -272,13 +272,18 @@ static struct attribute_group mc_attr_group = {
 	.name = "microcode",
 };
 
-static void microcode_fini_cpu(int cpu)
+static void __microcode_fini_cpu(int cpu)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
-	mutex_lock(&microcode_mutex);
 	microcode_ops->microcode_fini_cpu(cpu);
 	uci->valid = 0;
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+	mutex_lock(&microcode_mutex);
+	__microcode_fini_cpu(cpu);
 	mutex_unlock(&microcode_mutex);
 }
 
@@ -306,12 +311,16 @@ static int microcode_resume_cpu(int cpu)
 	 * to this cpu (a bit of paranoia):
 	 */
 	if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
-		microcode_fini_cpu(cpu);
+		__microcode_fini_cpu(cpu);
+		printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n",
+				cpu);
 		return -1;
 	}
 
-	if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
-		microcode_fini_cpu(cpu);
+	if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) {
+		__microcode_fini_cpu(cpu);
+		printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n",
+				cpu);
 		/* Should we look for a new ucode here? */
 		return 1;
 	}

arch/x86/kernel/microcode_intel.c

@@ -155,6 +155,7 @@ static DEFINE_SPINLOCK(microcode_update_lock);
 static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
+	unsigned long flags;
 	unsigned int val[2];
 
 	memset(csig, 0, sizeof(*csig));
@@ -174,11 +175,16 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 		csig->pf = 1 << ((val[1] >> 18) & 7);
 	}
 
+	/* serialize access to the physical write to MSR 0x79 */
+	spin_lock_irqsave(&microcode_update_lock, flags);
+
 	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
 	/* see notes above for revision 1.07.  Apparent chip bug */
 	sync_core();
 	/* get the current revision from MSR 0x8B */
 	rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
+	spin_unlock_irqrestore(&microcode_update_lock, flags);
+
 	pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
 			csig->sig, csig->pf, csig->rev);
 

arch/x86/kernel/pci-gart_64.c

@@ -745,10 +745,8 @@ void __init gart_iommu_init(void)
 	unsigned long scratch;
 	long i;
 
-	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) {
-		printk(KERN_INFO "PCI-GART: No AMD GART found.\n");
+	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
 		return;
-	}
 
 #ifndef CONFIG_AGP_AMD64
 	no_agp = 1;

crypto/async_tx/async_xor.c

@@ -53,10 +53,17 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
 	int xor_src_cnt;
 	dma_addr_t dma_dest;
 
-	dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_FROM_DEVICE);
-	for (i = 0; i < src_cnt; i++)
+	/* map the dest bidrectional in case it is re-used as a source */
+	dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL);
+	for (i = 0; i < src_cnt; i++) {
+		/* only map the dest once */
+		if (unlikely(src_list[i] == dest)) {
+			dma_src[i] = dma_dest;
+			continue;
+		}
 		dma_src[i] = dma_map_page(dma->dev, src_list[i], offset,
 					  len, DMA_TO_DEVICE);
+	}
 
 	while (src_cnt) {
 		async_flags = flags;

drivers/acpi/bus.c

@@ -688,14 +688,6 @@ void __init acpi_early_init(void)
 	if (acpi_disabled)
 		return;
 
-	/*
-	 * ACPI CA initializes acpi_dbg_level to non-zero, which means
-	 * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
-	 * Turn it off so we don't get output unless the user specifies
-	 * acpi.debug_level.
-	 */
-	acpi_dbg_level = 0;
-
 	printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
 
 	/* enable workarounds, unless strict ACPI spec. compliance */

drivers/acpi/utilities/utglobal.c

@@ -64,7 +64,7 @@ u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT;
 
 /* Debug switch - layer (component) mask */
 
-u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS;
+u32 acpi_dbg_layer = 0;
 u32 acpi_gbl_nesting_level = 0;
 
 /* Debugger globals */

drivers/block/cciss.c

@@ -1693,6 +1693,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time)
 	for (i = 0; i <= h->highest_lun; i++) {
 		int j;
 		drv_found = 0;
+
+		/* skip holes in the array from already deleted drives */
+		if (h->drv[i].raid_level == -1)
+			continue;
+
 		for (j = 0; j < num_luns; j++) {
 			memcpy(&lunid, &ld_buff->LUN[j][0], 4);
 			lunid = le32_to_cpu(lunid);

drivers/dma/dmaengine.c

@@ -388,7 +388,10 @@ int dma_async_device_register(struct dma_device *device)
 
 	init_completion(&device->done);
 	kref_init(&device->refcount);
+
+	mutex_lock(&dma_list_mutex);
 	device->dev_id = id++;
+	mutex_unlock(&dma_list_mutex);
 
 	/* represent channels in sysfs. Probably want devs too */
 	list_for_each_entry(chan, &device->channels, device_node) {

drivers/dma/ioat_dma.c

@@ -1341,10 +1341,12 @@ static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan)
  */
 #define IOAT_TEST_SIZE 2000
 
+DECLARE_COMPLETION(test_completion);
 static void ioat_dma_test_callback(void *dma_async_param)
 {
 	printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n",
 		dma_async_param);
+	complete(&test_completion);
 }
 
 /**
@@ -1410,7 +1412,8 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
 		goto free_resources;
 	}
 	device->common.device_issue_pending(dma_chan);
-	msleep(1);
+
+	wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000));
 
 	if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
 					!= DMA_SUCCESS) {

drivers/dma/iop-adma.c

@@ -85,18 +85,28 @@ iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc,
 			enum dma_ctrl_flags flags = desc->async_tx.flags;
 			u32 src_cnt;
 			dma_addr_t addr;
+			dma_addr_t dest;
 
+			src_cnt = unmap->unmap_src_cnt;
+			dest = iop_desc_get_dest_addr(unmap, iop_chan);
 			if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
-				addr = iop_desc_get_dest_addr(unmap, iop_chan);
-				dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+				enum dma_data_direction dir;
+
+				if (src_cnt > 1) /* is xor? */
+					dir = DMA_BIDIRECTIONAL;
+				else
+					dir = DMA_FROM_DEVICE;
+
+				dma_unmap_page(dev, dest, len, dir);
 			}
 
 			if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
-				src_cnt = unmap->unmap_src_cnt;
 				while (src_cnt--) {
 					addr = iop_desc_get_src_addr(unmap,
 								     iop_chan,
 								     src_cnt);
+					if (addr == dest)
+						continue;
 					dma_unmap_page(dev, addr, len,
 						       DMA_TO_DEVICE);
 				}

drivers/dma/mv_xor.c

@@ -311,17 +311,26 @@ mv_xor_run_tx_complete_actions(struct mv_xor_desc_slot *desc,
 			enum dma_ctrl_flags flags = desc->async_tx.flags;
 			u32 src_cnt;
 			dma_addr_t addr;
+			dma_addr_t dest;
 
+			src_cnt = unmap->unmap_src_cnt;
+			dest = mv_desc_get_dest_addr(unmap);
 			if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
-				addr = mv_desc_get_dest_addr(unmap);
-				dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+				enum dma_data_direction dir;
+
+				if (src_cnt > 1) /* is xor ? */
+					dir = DMA_BIDIRECTIONAL;
+				else
+					dir = DMA_FROM_DEVICE;
+				dma_unmap_page(dev, dest, len, dir);
 			}
 
 			if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
-				src_cnt = unmap->unmap_src_cnt;
 				while (src_cnt--) {
 					addr = mv_desc_get_src_addr(unmap,
 								    src_cnt);
+					if (addr == dest)
+						continue;
 					dma_unmap_page(dev, addr, len,
 						       DMA_TO_DEVICE);
 				}

drivers/edac/edac_device.c

@@ -394,6 +394,12 @@ static void edac_device_workq_function(struct work_struct *work_req)
 
 	mutex_lock(&device_ctls_mutex);
 
+	/* If we are being removed, bail out immediately */
+	if (edac_dev->op_state == OP_OFFLINE) {
+		mutex_unlock(&device_ctls_mutex);
+		return;
+	}
+
 	/* Only poll controllers that are running polled and have a check */
 	if ((edac_dev->op_state == OP_RUNNING_POLL) &&
 		(edac_dev->edac_check != NULL)) {
@@ -585,14 +591,14 @@ struct edac_device_ctl_info *edac_device_del_device(struct device *dev)
 	/* mark this instance as OFFLINE */
 	edac_dev->op_state = OP_OFFLINE;
 
-	/* clear workq processing on this instance */
-	edac_device_workq_teardown(edac_dev);
-
 	/* deregister from global list */
 	del_edac_device_from_global_list(edac_dev);
 
 	mutex_unlock(&device_ctls_mutex);
 
+	/* clear workq processing on this instance */
+	edac_device_workq_teardown(edac_dev);
+
 	/* Tear down the sysfs entries for this instance */
 	edac_device_remove_sysfs(edac_dev);
 

drivers/gpu/drm/i915/i915_dma.c

@@ -717,7 +717,7 @@ static int i915_getparam(struct drm_device *dev, void *data,
 		value = dev->pci_device;
 		break;
 	case I915_PARAM_HAS_GEM:
-		value = 1;
+		value = dev_priv->has_gem;
 		break;
 	default:
 		DRM_ERROR("Unknown parameter %d\n", param->param);
@@ -830,6 +830,14 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	dev_priv->regs = ioremap(base, size);
 
+#ifdef CONFIG_HIGHMEM64G
+	/* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
+	dev_priv->has_gem = 0;
+#else
+	/* enable GEM by default */
+	dev_priv->has_gem = 1;
+#endif
+
 	i915_gem_load(dev);
 
 	/* Init HWS */

drivers/gpu/drm/i915/i915_drv.h

@@ -106,6 +106,8 @@ struct intel_opregion {
 typedef struct drm_i915_private {
 	struct drm_device *dev;
 
+	int has_gem;
+
 	void __iomem *regs;
 	drm_local_map_t *sarea;
 

drivers/gpu/drm/i915/i915_gem.c

@@ -2309,7 +2309,14 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 	}
 
 	obj_priv = obj->driver_private;
-	args->busy = obj_priv->active;
+	/* Don't count being on the flushing list against the object being
+	 * done.  Otherwise, a buffer left on the flushing list but not getting
+	 * flushed (because nobody's flushing that domain) won't ever return
+	 * unbusy and get reused by libdrm's bo cache.  The other expected
+	 * consumer of this interface, OpenGL's occlusion queries, also specs
+	 * that the objects get unbusy "eventually" without any interference.
+	 */
+	args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0;
 
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);

drivers/gpu/drm/radeon/radeon_irq.c

@@ -44,7 +44,7 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state)
 	else
 		dev_priv->irq_enable_reg &= ~mask;
 
-	if (!dev->irq_enabled)
+	if (dev->irq_enabled)
 		RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
 }
 
@@ -57,7 +57,7 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
 	else
 		dev_priv->r500_disp_irq_reg &= ~mask;
 
-	if (!dev->irq_enabled)
+	if (dev->irq_enabled)
 		RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
 }
 

drivers/ide/cs5530.c

@@ -81,11 +81,12 @@ static u8 cs5530_udma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *mate = ide_get_pair_dev(drive);
-	u16 *mateid = mate->id;
+	u16 *mateid;
 	u8 mask = hwif->ultra_mask;
 
 	if (mate == NULL)
 		goto out;
+	mateid = mate->id;
 
 	if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
 		if ((mateid[ATA_ID_FIELD_VALID] & 4) &&

drivers/ide/sc1200.c

@@ -104,11 +104,12 @@ static u8 sc1200_udma_filter(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
 	ide_drive_t *mate = ide_get_pair_dev(drive);
-	u16 *mateid = mate->id;
+	u16 *mateid;
 	u8 mask = hwif->ultra_mask;
 
 	if (mate == NULL)
 		goto out;
+	mateid = mate->id;
 
 	if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
 		if ((mateid[ATA_ID_FIELD_VALID] & 4) &&

drivers/md/bitmap.c

@@ -208,15 +208,18 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page)
  */
 
 /* IO operations when bitmap is stored near all superblocks */
-static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index)
+static struct page *read_sb_page(mddev_t *mddev, long offset,
+				 struct page *page,
+				 unsigned long index, int size)
 {
 	/* choose a good rdev and read the page from there */
 
 	mdk_rdev_t *rdev;
 	struct list_head *tmp;
-	struct page *page = alloc_page(GFP_KERNEL);
 	sector_t target;
 
+	if (!page)
+		page = alloc_page(GFP_KERNEL);
 	if (!page)
 		return ERR_PTR(-ENOMEM);
 
@@ -227,7 +230,9 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde
 
 		target = rdev->sb_start + offset + index * (PAGE_SIZE/512);
 
-		if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) {
+		if (sync_page_io(rdev->bdev, target,
+				 roundup(size, bdev_hardsect_size(rdev->bdev)),
+				 page, READ)) {
 			page->index = index;
 			attach_page_buffers(page, NULL); /* so that free_buffer will
 							  * quietly no-op */
@@ -544,7 +549,9 @@ static int bitmap_read_sb(struct bitmap *bitmap)
 
 		bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes);
 	} else {
-		bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0);
+		bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset,
+					       NULL,
+					       0, sizeof(bitmap_super_t));
 	}
 	if (IS_ERR(bitmap->sb_page)) {
 		err = PTR_ERR(bitmap->sb_page);
@@ -957,11 +964,16 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
 				 */
 				page = bitmap->sb_page;
 				offset = sizeof(bitmap_super_t);
+				read_sb_page(bitmap->mddev, bitmap->offset,
+					     page,
+					     index, count);
 			} else if (file) {
 				page = read_page(file, index, bitmap, count);
 				offset = 0;
 			} else {
-				page = read_sb_page(bitmap->mddev, bitmap->offset, index);
+				page = read_sb_page(bitmap->mddev, bitmap->offset,
+						    NULL,
+						    index, count);
 				offset = 0;
 			}
 			if (IS_ERR(page)) { /* read error */

drivers/media/dvb/b2c2/Kconfig

@@ -9,11 +9,11 @@ config DVB_B2C2_FLEXCOP
 	select DVB_STV0297 if !DVB_FE_CUSTOMISE
 	select DVB_BCM3510 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
 	select DVB_S5H1420 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
 	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
 	select DVB_CX24123 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for the digital TV receiver chip made by B2C2 Inc. included in
 	  Technisats PCI cards and USB boxes.

drivers/media/dvb/b2c2/flexcop-fe-tuner.c

@@ -628,12 +628,14 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 	}
 
 	/* try the cable dvb (stv0297) */
+	fc->fc_i2c_adap[0].no_base_addr = 1;
 	fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
 	if (fc->fe != NULL) {
 		fc->dev_type = FC_CABLE;
 		fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
 		goto fe_found;
 	}
+	fc->fc_i2c_adap[0].no_base_addr = 0;
 
 	/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
 	fc->fe = dvb_attach(mt312_attach,

drivers/media/dvb/b2c2/flexcop-i2c.c

@@ -47,8 +47,12 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c,
 	int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
 		ret;
 
-	r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
 	ret = flexcop_i2c_operation(i2c->fc, &r100);
+	if (ret != 0) {
+		deb_i2c("Retrying operation\n");
+		r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+		ret = flexcop_i2c_operation(i2c->fc, &r100);
+	}
 	if (ret != 0) {
 		deb_i2c("read failed. %d\n", ret);
 		return ret;

drivers/media/dvb/bt8xx/Kconfig

@@ -8,7 +8,7 @@ config DVB_BT8XX
 	select DVB_OR51211 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
 	  the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,

drivers/media/dvb/dvb-usb/Kconfig

@@ -24,8 +24,8 @@ config DVB_USB_A800
 	tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
 
@@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB
 	depends on DVB_USB
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_DIB3000MB
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC
 	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for USB2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@@ -73,11 +73,11 @@ config DVB_USB_DIB0700
 	select DVB_DIB7000M
 	select DVB_DIB3000MC
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
 	select DVB_TUNER_DIB0070
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
 	  USB bridge is also present in devices having the DiB7700 DVB-T-USB
@@ -95,7 +95,7 @@ config DVB_USB_UMT_010
 	depends on DVB_USB
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
@@ -107,11 +107,11 @@ config DVB_USB_CXUSB
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
@@ -124,9 +124,9 @@ config DVB_USB_M920X
 	tristate "Uli m920x DVB-T USB2.0 support"
 	depends on DVB_USB
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
 	  Currently, only devices with a product id of
@@ -137,7 +137,7 @@ config DVB_USB_GL861
 	tristate "Genesys Logic GL861 USB2.0 support"
 	depends on DVB_USB
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
 	  receiver with USB ID 0db0:5581.
@@ -146,7 +146,7 @@ config DVB_USB_AU6610
 	tristate "Alcor Micro AU6610 USB2.0 support"
 	depends on DVB_USB
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
 
@@ -198,8 +198,8 @@ config DVB_USB_NOVA_T_USB2
 	tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
 
@@ -235,8 +235,8 @@ config DVB_USB_OPERA1
 config DVB_USB_AF9005
 	tristate "Afatech AF9005 DVB-T USB1.1 support"
 	depends on DVB_USB && EXPERIMENTAL
-	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
 	  and the TerraTec Cinergy T USB XE (Rev.1)
@@ -284,7 +284,7 @@ config DVB_USB_DTV5100
 	tristate "AME DTV-5100 USB2.0 DVB-T support"
 	depends on DVB_USB
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
 
@@ -293,9 +293,9 @@ config DVB_USB_AF9015
 	depends on DVB_USB && EXPERIMENTAL
 	select DVB_AF9013
 	select DVB_PLL              if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2060   if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_QT1010   if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060   if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_QT1010   if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
 	help
 	  Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver

drivers/media/dvb/dvb-usb/dib0700_devices.c

@@ -446,13 +446,13 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
 		== NULL ? -ENODEV : 0;
 }
 
-#define DEFAULT_RC_INTERVAL 150
+#define DEFAULT_RC_INTERVAL 50
 
 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
 
 /* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY 2
-#define RC_REPEAT_DELAY_V1_20 5
+#define RC_REPEAT_DELAY 6
+#define RC_REPEAT_DELAY_V1_20 10
 
 
 

drivers/media/dvb/ttpci/Kconfig

@@ -106,7 +106,7 @@ config DVB_BUDGET_CI
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
 	select VIDEO_IR
 	help
 	  Support for simple SAA7146 based DVB cards

drivers/media/video/compat_ioctl32.c

@@ -831,7 +831,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	int ret = -ENOIOCTLCMD;
 
-	if (!file->f_op->ioctl)
+	if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl)
 		return ret;
 
 	switch (cmd) {

drivers/media/video/cx18/Kconfig

@@ -9,7 +9,7 @@ config VIDEO_CX18
 	select VIDEO_CX2341X
 	select VIDEO_CS5345
 	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Conexant cx23418 based
 	  PCI combo video recorder devices.

drivers/media/video/cx23885/Kconfig

@@ -11,16 +11,16 @@ config VIDEO_CX23885
 	select VIDEO_CX25840
 	select VIDEO_CX2341X
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1409 if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
-	select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Conexant 23885 based
 	  TV cards.

drivers/media/video/cx88/Kconfig

@@ -56,12 +56,12 @@ config VIDEO_CX88_DVB
 	select DVB_NXT200X if !DVB_FE_CUSTOMISE
 	select DVB_CX24123 if !DVB_FE_CUSTOMISE
 	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_STV0288 if !DVB_FE_CUSTOMISE
 	select DVB_STB6000 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	---help---
 	  This adds support for DVB/ATSC cards based on the
 	  Conexant 2388x chip.

drivers/media/video/em28xx/em28xx-video.c

@@ -549,10 +549,11 @@ static int em28xx_config(struct em28xx *dev)
 static void em28xx_config_i2c(struct em28xx *dev)
 {
 	struct v4l2_routing route;
+	int zero = 0;
 
 	route.input = INPUT(dev->ctl_input)->vmux;
 	route.output = 0;
-	em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL);
+	em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero);
 	em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
 	em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
 }

drivers/media/video/gspca/gspca.c

@@ -1264,10 +1264,10 @@ static int vidioc_s_jpegcomp(struct file *file, void *priv,
 	struct gspca_dev *gspca_dev = priv;
 	int ret;
 
-	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
-		return -ERESTARTSYS;
 	if (!gspca_dev->sd_desc->set_jcomp)
 		return -EINVAL;
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
 	ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp);
 	mutex_unlock(&gspca_dev->usb_lock);
 	return ret;

drivers/media/video/pvrusb2/Kconfig

@@ -42,7 +42,7 @@ config VIDEO_PVRUSB2_DVB
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
 	---help---
 

drivers/media/video/saa7134/Kconfig

@@ -34,9 +34,9 @@ config VIDEO_SAA7134_DVB
 	select DVB_NXT200X if !DVB_FE_CUSTOMISE
 	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
 	select DVB_TDA826X if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
 	select DVB_ISL6421 if !DVB_FE_CUSTOMISE
-	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
+	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
 	---help---
 	  This adds support for DVB cards based on the
 	  Philips saa7134 chip.

drivers/message/fusion/mptscsih.c

@@ -2008,6 +2008,9 @@ mptscsih_host_reset(struct scsi_cmnd *SCpnt)
 		return FAILED;
 	}
 
+	/* make sure we have no outstanding commands at this stage */
+	mptscsih_flush_running_cmds(hd);
+
 	ioc = hd->ioc;
 	printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
 	    ioc->name, SCpnt);

drivers/net/bnx2.c

@@ -543,9 +543,9 @@ bnx2_free_rx_mem(struct bnx2 *bp)
 		for (j = 0; j < bp->rx_max_pg_ring; j++) {
 			if (rxr->rx_pg_desc_ring[j])
 				pci_free_consistent(bp->pdev, RXBD_RING_SIZE,
-						    rxr->rx_pg_desc_ring[i],
-						    rxr->rx_pg_desc_mapping[i]);
-			rxr->rx_pg_desc_ring[i] = NULL;
+						    rxr->rx_pg_desc_ring[j],
+						    rxr->rx_pg_desc_mapping[j]);
+			rxr->rx_pg_desc_ring[j] = NULL;
 		}
 		if (rxr->rx_pg_ring)
 			vfree(rxr->rx_pg_ring);

drivers/net/enc28j60.c

@@ -959,7 +959,7 @@ static void enc28j60_hw_rx(struct net_device *ndev)
 			ndev->stats.rx_packets++;
 			ndev->stats.rx_bytes += len;
 			ndev->last_rx = jiffies;
-			netif_rx(skb);
+			netif_rx_ni(skb);
 		}
 	}
 	/*

drivers/net/jme.h

@@ -22,7 +22,7 @@
  */
 
 #ifndef __JME_H_INCLUDED__
-#define __JME_H_INCLUDEE__
+#define __JME_H_INCLUDED__
 
 #define DRV_NAME	"jme"
 #define DRV_VERSION	"1.0.3"

drivers/net/phy/mdio_bus.c

@@ -105,8 +105,6 @@ int mdiobus_register(struct mii_bus *bus)
 		return -EINVAL;
 	}
 
-	bus->state = MDIOBUS_REGISTERED;
-
 	mutex_init(&bus->mdio_lock);
 
 	if (bus->reset)
@@ -123,6 +121,9 @@ int mdiobus_register(struct mii_bus *bus)
 		}
 	}
 
+	if (!err)
+		bus->state = MDIOBUS_REGISTERED;
+
 	pr_info("%s: probed\n", bus->name);
 
 	return err;

drivers/net/ppp_generic.c

@@ -116,6 +116,7 @@ struct ppp {
 	unsigned long	last_xmit;	/* jiffies when last pkt sent 9c */
 	unsigned long	last_recv;	/* jiffies when last pkt rcvd a0 */
 	struct net_device *dev;		/* network interface device a4 */
+	int		closing;	/* is device closing down? a8 */
 #ifdef CONFIG_PPP_MULTILINK
 	int		nxchan;		/* next channel to send something on */
 	u32		nxseq;		/* next sequence number to send */
@@ -995,7 +996,7 @@ ppp_xmit_process(struct ppp *ppp)
 	struct sk_buff *skb;
 
 	ppp_xmit_lock(ppp);
-	if (ppp->dev) {
+	if (!ppp->closing) {
 		ppp_push(ppp);
 		while (!ppp->xmit_pending
 		       && (skb = skb_dequeue(&ppp->file.xq)))
@@ -1463,8 +1464,7 @@ static inline void
 ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
 {
 	ppp_recv_lock(ppp);
-	/* ppp->dev == 0 means interface is closing down */
-	if (ppp->dev)
+	if (!ppp->closing)
 		ppp_receive_frame(ppp, skb, pch);
 	else
 		kfree_skb(skb);
@@ -2498,18 +2498,16 @@ init_ppp_file(struct ppp_file *pf, int kind)
  */
 static void ppp_shutdown_interface(struct ppp *ppp)
 {
-	struct net_device *dev;
-
 	mutex_lock(&all_ppp_mutex);
-	ppp_lock(ppp);
-	dev = ppp->dev;
-	ppp->dev = NULL;
-	ppp_unlock(ppp);
 	/* This will call dev_close() for us. */
-	if (dev) {
-		unregister_netdev(dev);
-		free_netdev(dev);
-	}
+	ppp_lock(ppp);
+	if (!ppp->closing) {
+		ppp->closing = 1;
+		ppp_unlock(ppp);
+		unregister_netdev(ppp->dev);
+	} else
+		ppp_unlock(ppp);
+
 	cardmap_set(&all_ppp_units, ppp->file.index, NULL);
 	ppp->file.dead = 1;
 	ppp->owner = NULL;
@@ -2554,7 +2552,7 @@ static void ppp_destroy_interface(struct ppp *ppp)
 	if (ppp->xmit_pending)
 		kfree_skb(ppp->xmit_pending);
 
-	kfree(ppp);
+	free_netdev(ppp->dev);
 }
 
 /*
@@ -2616,7 +2614,7 @@ ppp_connect_channel(struct channel *pch, int unit)
 	if (pch->file.hdrlen > ppp->file.hdrlen)
 		ppp->file.hdrlen = pch->file.hdrlen;
 	hdrlen = pch->file.hdrlen + 2;	/* for protocol bytes */
-	if (ppp->dev && hdrlen > ppp->dev->hard_header_len)
+	if (hdrlen > ppp->dev->hard_header_len)
 		ppp->dev->hard_header_len = hdrlen;
 	list_add_tail(&pch->clist, &ppp->channels);
 	++ppp->n_channels;

drivers/net/starfire.c

@@ -1509,6 +1509,11 @@ static int __netdev_rx(struct net_device *dev, int *quota)
 		desc->status = 0;
 		np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE;
 	}
+
+	if (*quota == 0) {	/* out of rx quota */
+		retcode = 1;
+		goto out;
+	}
 	writew(np->rx_done, np->base + CompletionQConsumerIdx);
 
  out:

drivers/net/tlan.c

@@ -1098,6 +1098,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 	dma_addr_t	tail_list_phys;
 	u8		*tail_buffer;
 	unsigned long	flags;
+	unsigned int    txlen;
 
 	if ( ! priv->phyOnline ) {
 		TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT:  %s PHY is not ready\n",
@@ -1108,6 +1109,7 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 
 	if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
 		return 0;
+	txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
 
 	tail_list = priv->txList + priv->txTail;
 	tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
@@ -1125,16 +1127,16 @@ static int TLan_StartTx( struct sk_buff *skb, struct net_device *dev )
 
 	if ( bbuf ) {
 		tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
-		skb_copy_from_linear_data(skb, tail_buffer, skb->len);
+		skb_copy_from_linear_data(skb, tail_buffer, txlen);
 	} else {
 		tail_list->buffer[0].address = pci_map_single(priv->pciDev,
-							      skb->data, skb->len,
+							      skb->data, txlen,
 							      PCI_DMA_TODEVICE);
 		TLan_StoreSKB(tail_list, skb);
 	}
 
-	tail_list->frameSize = (u16) skb->len;
-	tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+	tail_list->frameSize = (u16) txlen;
+	tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
 	tail_list->buffer[1].count = 0;
 	tail_list->buffer[1].address = 0;
 
@@ -1431,7 +1433,9 @@ static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int )
 		if ( ! bbuf ) {
 			struct sk_buff *skb = TLan_GetSKB(head_list);
 			pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
-					 skb->len, PCI_DMA_TODEVICE);
+					 max(skb->len,
+					     (unsigned int)TLAN_MIN_FRAME_SIZE),
+					 PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(skb);
 			head_list->buffer[8].address = 0;
 			head_list->buffer[9].address = 0;
@@ -2055,9 +2059,12 @@ static void TLan_FreeLists( struct net_device *dev )
 			list = priv->txList + i;
 			skb = TLan_GetSKB(list);
 			if ( skb ) {
-				pci_unmap_single(priv->pciDev,
-						 list->buffer[0].address, skb->len,
-						 PCI_DMA_TODEVICE);
+				pci_unmap_single(
+					priv->pciDev,
+					list->buffer[0].address,
+					max(skb->len,
+					    (unsigned int)TLAN_MIN_FRAME_SIZE),
+					PCI_DMA_TODEVICE);
 				dev_kfree_skb_any( skb );
 				list->buffer[8].address = 0;
 				list->buffer[9].address = 0;

drivers/pci/hotplug/acpiphp.h

@@ -113,7 +113,7 @@ struct acpiphp_slot {
 
 	u8		device;		/* pci device# */
 
-	u32		sun;		/* ACPI _SUN (slot unique number) */
+	unsigned long long sun;		/* ACPI _SUN (slot unique number) */
 	u32		flags;		/* see below */
 };
 

drivers/pci/hotplug/acpiphp_core.c

@@ -337,7 +337,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
 	slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
 
 	acpiphp_slot->slot = slot;
-	snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun);
+	snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
 
 	retval = pci_hp_register(slot->hotplug_slot,
 					acpiphp_slot->bridge->pci_bus,

drivers/pci/hotplug/acpiphp_glue.c

@@ -255,13 +255,13 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 
 		bridge->nr_slots++;
 
-		dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n",
+		dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
 				slot->sun, pci_domain_nr(bridge->pci_bus),
 				bridge->pci_bus->number, slot->device);
 		retval = acpiphp_register_hotplug_slot(slot);
 		if (retval) {
 			if (retval == -EBUSY)
-				warn("Slot %d already registered by another "
+				warn("Slot %llu already registered by another "
 					"hotplug driver\n", slot->sun);
 			else
 				warn("acpiphp_register_hotplug_slot failed "

drivers/pci/hotplug/ibmphp_core.c

@@ -1402,10 +1402,6 @@ static int __init ibmphp_init(void)
 		goto error;
 	}
 
-	/* lock ourselves into memory with a module 
-	 * count of -1 so that no one can unload us. */
-	module_put(THIS_MODULE);
-
 exit:
 	return rc;
 
@@ -1423,4 +1419,3 @@ static void __exit ibmphp_exit(void)
 }
 
 module_init(ibmphp_init);
-module_exit(ibmphp_exit);

drivers/pci/hotplug/pciehp_core.c

@@ -432,18 +432,19 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
 		goto err_out_release_ctlr;
 	}
 
+	/* Check if slot is occupied */
 	t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-
-	t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
-	if (value && pciehp_force) {
-		rc = pciehp_enable_slot(t_slot);
-		if (rc)	/* -ENODEV: shouldn't happen, but deal with it */
-			value = 0;
-	}
-	if ((POWER_CTRL(ctrl)) && !value) {
-		rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
-		if (rc)
-			goto err_out_free_ctrl_slot;
+	t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+	if (value) {
+		if (pciehp_force)
+			pciehp_enable_slot(t_slot);
+	} else {
+		/* Power off slot if not occupied */
+		if (POWER_CTRL(ctrl)) {
+			rc = t_slot->hpc_ops->power_off_slot(t_slot);
+			if (rc)
+				goto err_out_free_ctrl_slot;
+		}
 	}
 
 	return 0;

drivers/pci/pcie/aer/aerdrv_core.c

@@ -252,7 +252,7 @@ static void report_resume(struct pci_dev *dev, void *data)
 
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
-		!dev->driver->err_handler->slot_reset)
+		!dev->driver->err_handler->resume)
 		return;
 
 	err_handler = dev->driver->err_handler;

drivers/rtc/rtc-isl1208.c

@@ -328,6 +328,13 @@ isl1208_i2c_set_time(struct i2c_client *client, struct rtc_time const *tm)
 	int sr;
 	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
 
+	/* The clock has an 8 bit wide bcd-coded register (they never learn)
+	 * for the year. tm_year is an offset from 1900 and we are interested
+	 * in the 2000-2099 range, so any value less than 100 is invalid.
+	 */
+	if (tm->tm_year < 100)
+		return -EINVAL;
+
 	regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
 	regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
 	regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;

drivers/scsi/aacraid/linit.c

@@ -175,8 +175,8 @@ static struct aac_driver_ident aac_drivers[] = {
 	{ aac_rx_init, "percraid", "DELL    ", "PERCRAID        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "catapult        ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "tomcat          ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2120S   ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },		      /* Adaptec 2120S (Crusader) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG },		      /* Adaptec 2200S (Vulcan) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "Adaptec 2200S   ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
 	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S220     ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
 	{ aac_rx_init, "aacraid",  "Legend  ", "Legend S230     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */

drivers/scsi/ibmvscsi/ibmvstgt.c

@@ -864,21 +864,23 @@ static int ibmvstgt_probe(struct vio_dev *dev, const struct vio_device_id *id)
 
 	INIT_WORK(&vport->crq_work, handle_crq);
 
-	err = crq_queue_create(&vport->crq_queue, target);
+	err = scsi_add_host(shost, target->dev);
 	if (err)
 		goto free_srp_target;
 
-	err = scsi_add_host(shost, target->dev);
+	err = scsi_tgt_alloc_queue(shost);
 	if (err)
-		goto destroy_queue;
+		goto remove_host;
 
-	err = scsi_tgt_alloc_queue(shost);
+	err = crq_queue_create(&vport->crq_queue, target);
 	if (err)
-		goto destroy_queue;
+		goto free_queue;
 
 	return 0;
-destroy_queue:
-	crq_queue_destroy(target);
+free_queue:
+	scsi_tgt_free_queue(shost);
+remove_host:
+	scsi_remove_host(shost);
 free_srp_target:
 	srp_target_free(target);
 put_host:

drivers/scsi/libiscsi.c

@@ -489,12 +489,6 @@ __iscsi_conn_send_pdu(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
 		if (!__kfifo_get(session->cmdpool.queue,
 				 (void*)&task, sizeof(void*)))
 			return NULL;
-
-		if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) &&
-		     hdr->ttt == RESERVED_ITT) {
-			conn->ping_task = task;
-			conn->last_ping = jiffies;
-		}
 	}
 	/*
 	 * released in complete pdu for task we expect a response for, and
@@ -703,6 +697,11 @@ static void iscsi_send_nopout(struct iscsi_conn *conn, struct iscsi_nopin *rhdr)
 	task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
 	if (!task)
 		iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
+	else if (!rhdr) {
+		/* only track our nops */
+		conn->ping_task = task;
+		conn->last_ping = jiffies;
+	}
 }
 
 static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,

drivers/scsi/scsi_lib.c

@@ -648,8 +648,8 @@ static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
 	struct request *req = cmd->request;
 	unsigned long flags;
 
-	scsi_unprep_request(req);
 	spin_lock_irqsave(q->queue_lock, flags);
+	scsi_unprep_request(req);
 	blk_requeue_request(q, req);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 

drivers/w1/w1_io.c

@@ -356,7 +356,9 @@ int w1_reset_select_slave(struct w1_slave *sl)
 		w1_write_8(sl->master, W1_SKIP_ROM);
 	else {
 		u8 match[9] = {W1_MATCH_ROM, };
-		memcpy(&match[1], (u8 *)&sl->reg_num, 8);
+		u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
+
+		memcpy(&match[1], &rn, 8);
 		w1_write_block(sl->master, match, 9);
 	}
 	return 0;

fs/9p/fid.c

@@ -45,7 +45,7 @@ int v9fs_fid_add(struct dentry *dentry, struct p9_fid *fid)
 	struct v9fs_dentry *dent;
 
 	P9_DPRINTK(P9_DEBUG_VFS, "fid %d dentry %s\n",
-					fid->fid, dentry->d_iname);
+					fid->fid, dentry->d_name.name);
 
 	dent = dentry->d_fsdata;
 	if (!dent) {
@@ -79,7 +79,7 @@ static struct p9_fid *v9fs_fid_find(struct dentry *dentry, u32 uid, int any)
 	struct p9_fid *fid, *ret;
 
 	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p) uid %d any %d\n",
-		dentry->d_iname, dentry, uid, any);
+		dentry->d_name.name, dentry, uid, any);
 	dent = (struct v9fs_dentry *) dentry->d_fsdata;
 	ret = NULL;
 	if (dent) {

fs/9p/v9fs.c

@@ -160,7 +160,7 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses)
 				v9ses->flags |= V9FS_ACCESS_ANY;
 			else {
 				v9ses->flags |= V9FS_ACCESS_SINGLE;
-				v9ses->uid = simple_strtol(s, &e, 10);
+				v9ses->uid = simple_strtoul(s, &e, 10);
 				if (*e != '\0')
 					v9ses->uid = ~0;
 			}

fs/9p/vfs_dentry.c

@@ -52,7 +52,8 @@
 
 static int v9fs_dentry_delete(struct dentry *dentry)
 {
-	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+									dentry);
 
 	return 1;
 }
@@ -69,7 +70,8 @@ static int v9fs_dentry_delete(struct dentry *dentry)
 static int v9fs_cached_dentry_delete(struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
-	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+									dentry);
 
 	if(!inode)
 		return 1;
@@ -88,7 +90,8 @@ void v9fs_dentry_release(struct dentry *dentry)
 	struct v9fs_dentry *dent;
 	struct p9_fid *temp, *current_fid;
 
-	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+									dentry);
 	dent = dentry->d_fsdata;
 	if (dent) {
 		list_for_each_entry_safe(current_fid, temp, &dent->fidlist,

fs/9p/vfs_inode.c

@@ -963,7 +963,8 @@ static int v9fs_vfs_readlink(struct dentry *dentry, char __user * buffer,
 	if (buflen > PATH_MAX)
 		buflen = PATH_MAX;
 
-	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+									dentry);
 
 	retval = v9fs_readlink(dentry, link, buflen);
 
@@ -1022,7 +1023,8 @@ v9fs_vfs_put_link(struct dentry *dentry, struct nameidata *nd, void *p)
 {
 	char *s = nd_get_link(nd);
 
-	P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name, s);
+	P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name,
+		IS_ERR(s) ? "<error>" : s);
 	if (!IS_ERR(s))
 		__putname(s);
 }

include/acpi/acoutput.h

@@ -172,7 +172,7 @@
 
 /* Defaults for debug_level, debug and normal */
 
-#define ACPI_DEBUG_DEFAULT          (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
+#define ACPI_DEBUG_DEFAULT          (ACPI_LV_INFO)
 #define ACPI_NORMAL_DEFAULT         (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
 #define ACPI_DEBUG_ALL              (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
 

include/acpi/platform/aclinux.h

@@ -141,6 +141,10 @@ static inline void *acpi_os_acquire_object(acpi_cache_t * cache)
 /*
  * We need to show where it is safe to preempt execution of ACPICA
  */
-#define ACPI_PREEMPTION_POINT()	cond_resched()
+#define ACPI_PREEMPTION_POINT()		\
+	do {				\
+		if (!irqs_disabled())	\
+			cond_resched();	\
+	} while (0)
 
 #endif				/* __ACLINUX_H__ */

include/linux/netfilter/nfnetlink_conntrack.h

@@ -141,6 +141,7 @@ enum ctattr_protonat {
 #define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1)
 
 enum ctattr_natseq {
+	CTA_NAT_SEQ_UNSPEC,
 	CTA_NAT_SEQ_CORRECTION_POS,
 	CTA_NAT_SEQ_OFFSET_BEFORE,
 	CTA_NAT_SEQ_OFFSET_AFTER,

include/net/irda/irda_device.h

@@ -135,9 +135,11 @@ struct dongle_reg {
 
 /* 
  * Per-packet information we need to hide inside sk_buff 
- * (must not exceed 48 bytes, check with struct sk_buff) 
+ * (must not exceed 48 bytes, check with struct sk_buff)
+ * The default_qdisc_pad field is a temporary hack.
  */
 struct irda_skb_cb {
+	unsigned int default_qdisc_pad;
 	magic_t magic;       /* Be sure that we can trust the information */
 	__u32   next_speed;  /* The Speed to be set *after* this frame */
 	__u16   mtt;         /* Minimum turn around time */

kernel/cgroup.c

@@ -1024,7 +1024,7 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 		if (ret == -EBUSY) {
 			mutex_unlock(&cgroup_mutex);
 			mutex_unlock(&inode->i_mutex);
-			goto drop_new_super;
+			goto free_cg_links;
 		}
 
 		/* EBUSY should be the only error here */
@@ -1073,10 +1073,11 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
 
 	return simple_set_mnt(mnt, sb);
 
+ free_cg_links:
+	free_cg_links(&tmp_cg_links);
  drop_new_super:
 	up_write(&sb->s_umount);
 	deactivate_super(sb);
-	free_cg_links(&tmp_cg_links);
 	return ret;
 }
 
@@ -2934,9 +2935,6 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys,
  again:
 	root = subsys->root;
 	if (root == &rootnode) {
-		printk(KERN_INFO
-		       "Not cloning cgroup for unused subsystem %s\n",
-		       subsys->name);
 		mutex_unlock(&cgroup_mutex);
 		return 0;
 	}

kernel/posix-timers.c

@@ -197,6 +197,11 @@ static int common_timer_create(struct k_itimer *new_timer)
 	return 0;
 }
 
+static int no_timer_create(struct k_itimer *new_timer)
+{
+	return -EOPNOTSUPP;
+}
+
 /*
  * Return nonzero if we know a priori this clockid_t value is bogus.
  */
@@ -248,6 +253,7 @@ static __init int init_posix_timers(void)
 		.clock_getres = hrtimer_get_res,
 		.clock_get = posix_get_monotonic_raw,
 		.clock_set = do_posix_clock_nosettime,
+		.timer_create = no_timer_create,
 	};
 
 	register_posix_clock(CLOCK_REALTIME, &clock_realtime);

net/bluetooth/rfcomm/core.c

@@ -1786,8 +1786,6 @@ static inline void rfcomm_accept_connection(struct rfcomm_session *s)
 	if (err < 0)
 		return;
 
-	__module_get(nsock->ops->owner);
-
 	/* Set our callbacks */
 	nsock->sk->sk_data_ready   = rfcomm_l2data_ready;
 	nsock->sk->sk_state_change = rfcomm_l2state_change;

net/socket.c

@@ -2307,6 +2307,7 @@ int kernel_accept(struct socket *sock, struct socket **newsock, int flags)
 	}
 
 	(*newsock)->ops = sock->ops;
+	__module_get((*newsock)->ops->owner);
 
 done:
 	return err;

sound/pci/hda/patch_sigmatel.c

@@ -69,6 +69,7 @@ enum {
 };
 
 enum {
+	STAC_92HD73XX_NO_JD, /* no jack-detection */
 	STAC_92HD73XX_REF,
 	STAC_DELL_M6_AMIC,
 	STAC_DELL_M6_DMIC,
@@ -127,6 +128,7 @@ enum {
 };
 
 enum {
+	STAC_D965_REF_NO_JD, /* no jack-detection */
 	STAC_D965_REF,
 	STAC_D965_3ST,
 	STAC_D965_5ST,
@@ -857,6 +859,7 @@ static struct hda_verb stac92hd83xxx_core_init[] = {
 
 	/* power state controls amps */
 	{ 0x01, AC_VERB_SET_EAPD, 1 << 2},
+	{}
 };
 
 static struct hda_verb stac92hd71bxx_core_init[] = {
@@ -868,6 +871,7 @@ static struct hda_verb stac92hd71bxx_core_init[] = {
 	{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
 	{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{}
 };
 
 #define HD_DISABLE_PORTF 2
@@ -1611,6 +1615,7 @@ static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
 };
 
 static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
+	[STAC_92HD73XX_NO_JD] = "no-jd",
 	[STAC_92HD73XX_REF] = "ref",
 	[STAC_DELL_M6_AMIC] = "dell-m6-amic",
 	[STAC_DELL_M6_DMIC] = "dell-m6-dmic",
@@ -1640,6 +1645,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
 				"unknown Dell", STAC_DELL_M6_DMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
 				"Dell Studio 1537", STAC_DELL_M6_DMIC),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
+				"Dell Studio 17", STAC_DELL_M6_DMIC),
 	{} /* terminator */
 };
 
@@ -1662,6 +1669,7 @@ static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
 		      "DFI LanParty", STAC_92HD71BXX_REF),
+	{} /* terminator */
 };
 
 static unsigned int ref92hd71bxx_pin_configs[11] = {
@@ -2027,6 +2035,7 @@ static unsigned int dell_3st_pin_configs[14] = {
 };
 
 static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
+	[STAC_D965_REF_NO_JD] = ref927x_pin_configs,
 	[STAC_D965_REF]  = ref927x_pin_configs,
 	[STAC_D965_3ST]  = d965_3st_pin_configs,
 	[STAC_D965_5ST]  = d965_5st_pin_configs,
@@ -2035,6 +2044,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
 };
 
 static const char *stac927x_models[STAC_927X_MODELS] = {
+	[STAC_D965_REF_NO_JD]	= "ref-no-jd",
 	[STAC_D965_REF]		= "ref",
 	[STAC_D965_3ST]		= "3stack",
 	[STAC_D965_5ST]		= "5stack",
@@ -2896,7 +2906,7 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
 	}
 
 	if ((spec->multiout.num_dacs - cfg->line_outs) > 0 &&
-			cfg->hp_outs && !spec->multiout.hp_nid)
+	    cfg->hp_outs == 1 && !spec->multiout.hp_nid)
 		spec->multiout.hp_nid = nid;
 
 	if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
@@ -4254,14 +4264,17 @@ again:
 
 	switch (spec->multiout.num_dacs) {
 	case 0x3: /* 6 Channel */
+		spec->multiout.hp_nid = 0x17;
 		spec->mixer = stac92hd73xx_6ch_mixer;
 		spec->init = stac92hd73xx_6ch_core_init;
 		break;
 	case 0x4: /* 8 Channel */
+		spec->multiout.hp_nid = 0x18;
 		spec->mixer = stac92hd73xx_8ch_mixer;
 		spec->init = stac92hd73xx_8ch_core_init;
 		break;
 	case 0x5: /* 10 Channel */
+		spec->multiout.hp_nid = 0x19;
 		spec->mixer = stac92hd73xx_10ch_mixer;
 		spec->init = stac92hd73xx_10ch_core_init;
 	};
@@ -4297,6 +4310,7 @@ again:
 		spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
 		spec->eapd_switch = 0;
 		spec->num_amps = 1;
+		spec->multiout.hp_nid = 0; /* dual HPs */
 
 		if (!spec->init)
 			spec->init = dell_m6_core_init;
@@ -4351,6 +4365,9 @@ again:
 		return err;
 	}
 
+	if (spec->board_config == STAC_92HD73XX_NO_JD)
+		spec->hp_detect = 0;
+
 	codec->patch_ops = stac92xx_patch_ops;
 
 	return 0;
@@ -4899,6 +4916,10 @@ static int patch_stac927x(struct hda_codec *codec)
 	 */
 	codec->bus->needs_damn_long_delay = 1;
 
+	/* no jack detecion for ref-no-jd model */
+	if (spec->board_config == STAC_D965_REF_NO_JD)
+		spec->hp_detect = 0;
+
 	return 0;
 }
 

sound/soc/omap/omap-pcm.c

@@ -233,7 +233,7 @@ static int omap_pcm_open(struct snd_pcm_substream *substream)
 	if (ret < 0)
 		goto out;
 
-	prtd = kzalloc(sizeof(prtd), GFP_KERNEL);
+	prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
 	if (prtd == NULL) {
 		ret = -ENOMEM;
 		goto out;