wireless: Remove unnecessary ; from while (0) macros

Semicolons are not necessary after macros that end in while (0).
Remove them.

Simplify the macros with tests of
do { if (foo>size) memset1; else memset2;} while (0);
to a single line memset(,,min_t(size_t, foo, size))

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/carl9170/cmd.h

@@ -114,7 +114,7 @@ __regwrite_out :							\
 
 #define carl9170_regwrite_result()					\
 	__err;								\
-} while (0);
+} while (0)
 
 
 #define carl9170_async_regwrite_get_buf()				\
@@ -126,7 +126,7 @@ do {									\
 		__err = -ENOMEM;					\
 		goto __async_regwrite_out;				\
 	}								\
-} while (0);
+} while (0)
 
 #define carl9170_async_regwrite_begin(carl)				\
 do {									\
@@ -169,6 +169,6 @@ __async_regwrite_out:							\
 
 #define carl9170_async_regwrite_result()				\
 	__err;								\
-} while (0);
+} while (0)
 
 #endif /* __CMD_H */

drivers/net/wireless/brcm80211/brcmsmac/d11.h

@@ -733,7 +733,7 @@ struct cck_phy_hdr {
 	do { \
 		plcp[1] = len & 0xff; \
 		plcp[2] = ((len >> 8) & 0xff); \
-	} while (0);
+	} while (0)
 
 #define BRCMS_SET_MIMO_PLCP_AMPDU(plcp) (plcp[3] |= MIMO_PLCP_AMPDU)
 #define BRCMS_CLR_MIMO_PLCP_AMPDU(plcp) (plcp[3] &= ~MIMO_PLCP_AMPDU)

drivers/net/wireless/mwifiex/sdio.h

@@ -193,7 +193,7 @@
 		a->mpa_tx.ports |= (1<<(a->mpa_tx.pkt_cnt+1+(MAX_PORT -	\
 						a->mp_end_port)));	\
 	a->mpa_tx.pkt_cnt++;						\
-} while (0);
+} while (0)
 
 /* SDIO Tx aggregation limit ? */
 #define MP_TX_AGGR_PKT_LIMIT_REACHED(a)					\
@@ -211,7 +211,7 @@
 	a->mpa_tx.buf_len = 0;						\
 	a->mpa_tx.ports = 0;						\
 	a->mpa_tx.start_port = 0;					\
-} while (0);
+} while (0)
 
 /* SDIO Rx aggregation limit ? */
 #define MP_RX_AGGR_PKT_LIMIT_REACHED(a)					\
@@ -242,7 +242,7 @@
 	a->mpa_rx.skb_arr[a->mpa_rx.pkt_cnt] = skb;			\
 	a->mpa_rx.len_arr[a->mpa_rx.pkt_cnt] = skb->len;		\
 	a->mpa_rx.pkt_cnt++;						\
-} while (0);
+} while (0)
 
 /* Reset SDIO Rx aggregation buffer parameters */
 #define MP_RX_AGGR_BUF_RESET(a) do {					\
@@ -250,7 +250,7 @@
 	a->mpa_rx.buf_len = 0;						\
 	a->mpa_rx.ports = 0;						\
 	a->mpa_rx.start_port = 0;					\
-} while (0);
+} while (0)
 
 
 /* data structure for SDIO MPA TX */

drivers/net/wireless/rtlwifi/rtl8192ce/trx.h

@@ -530,12 +530,7 @@
 	SET_BITS_OFFSET_LE(__pdesc+28, 0, 32, __val)
 
 #define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size)	\
-do {							\
-	if (_size > TX_DESC_NEXT_DESC_OFFSET)		\
-		memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET);	\
-	else						\
-		memset(__pdesc, 0, _size);	\
-} while (0);
+	memset(__pdesc, 0, min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
 
 struct rx_fwinfo_92c {
 	u8 gain_trsw[4];

drivers/net/wireless/rtlwifi/rtl8192de/trx.h

@@ -530,12 +530,8 @@
 	SET_BITS_OFFSET_LE(__pdesc+28, 0, 32, __val)
 
 #define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size)	\
-do {							\
-	if (_size > TX_DESC_NEXT_DESC_OFFSET)		\
-		memset((void *)__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET);	\
-	else						\
-		memset((void *)__pdesc, 0, _size);	\
-} while (0);
+	memset((void *)__pdesc, 0,			\
+	       min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
 
 /* For 92D early mode */
 #define SET_EARLYMODE_PKTNUM(__paddr, __value)		\

drivers/net/wireless/rtlwifi/rtl8192se/def.h

@@ -252,12 +252,7 @@
  * the desc is cleared. */
 #define	TX_DESC_NEXT_DESC_OFFSET			36
 #define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size)		\
-do {								\
-	if (_size > TX_DESC_NEXT_DESC_OFFSET)			\
-		memset(__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET);	\
-	else							\
-		memset(__pdesc, 0, _size);			\
-} while (0);
+	memset(__pdesc, 0, min_t(size_t, _size, TX_DESC_NEXT_DESC_OFFSET))
 
 /* Rx Desc */
 #define RX_STATUS_DESC_SIZE				24

drivers/net/wireless/rtlwifi/rtl8192se/fw.h

@@ -345,7 +345,7 @@ enum fw_h2c_cmd {
 	do {							\
 		udelay(1000);					\
 		rtlpriv->rtlhal.fwcmd_iomap &= (~_Bit);		\
-	} while (0);
+	} while (0)
 
 #define FW_CMD_IO_UPDATE(rtlpriv, _val)				\
 	rtlpriv->rtlhal.fwcmd_iomap = _val;
@@ -354,13 +354,13 @@ enum fw_h2c_cmd {
 	do {							\
 		rtl_write_word(rtlpriv, LBUS_MON_ADDR, (u16)_val);	\
 		FW_CMD_IO_UPDATE(rtlpriv, _val);		\
-	} while (0);
+	} while (0)
 
 #define FW_CMD_PARA_SET(rtlpriv, _val)				\
 	do {							\
 		rtl_write_dword(rtlpriv, LBUS_ADDR_MASK, _val);	\
 		rtlpriv->rtlhal.fwcmd_ioparam = _val;		\
-	} while (0);
+	} while (0)
 
 #define FW_CMD_IO_QUERY(rtlpriv)				\
 	(u16)(rtlpriv->rtlhal.fwcmd_iomap)