Merge tag 'orion_cleanup_for_3.8' of git://git.infradead.org/users/jcooper/linux into next/cleanup

From Jason Cooper:
orion cleanup for v3.8

 - remove unused includes in kirkwood
 - fix sparse warnings in kirkwood
 - checkpatch cleanup in kirkwood
 - use common code in pcie on kirkwood

* tag 'orion_cleanup_for_3.8' of git://git.infradead.org/users/jcooper/linux:
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes

arch/arm/mach-kirkwood/board-dockstar.c

@@ -16,21 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/board-dreamplug.c

@@ -13,23 +13,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/gpio.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"

arch/arm/mach-kirkwood/board-dt.c

@@ -26,7 +26,7 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
 	{ }
 };
 
-struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
 	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
 		       NULL),
@@ -98,7 +98,7 @@ static void __init kirkwood_dt_init(void)
 			     kirkwood_auxdata_lookup, NULL);
 }
 
-static const char *kirkwood_dt_board_compat[] = {
+static const char * const kirkwood_dt_board_compat[] = {
 	"globalscale,dreamplug",
 	"dlink,dns-320",
 	"dlink,dns-325",

arch/arm/mach-kirkwood/board-goflexnet.c

@@ -18,21 +18,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/kirkwood.h>
-#include <mach/bridge-regs.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/board-ib62x0.c

@@ -13,15 +13,9 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/board-iconnect.c

@@ -10,16 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/board-iomega_ix2_200.c

@@ -10,10 +10,8 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
-#include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/board-lsxl.c

@@ -14,17 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include <linux/gpio-fan.h>
-#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-kirkwood/board-ts219.c

@@ -19,9 +19,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>

arch/arm/mach-kirkwood/common.c

@@ -18,10 +18,10 @@
 #include <linux/clk-provider.h>
 #include <linux/spinlock.h>
 #include <linux/mv643xx_i2c.h>
+#include <linux/timex.h>
+#include <linux/kexec.h>
 #include <net/dsa.h>
 #include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/kexec.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
@@ -425,7 +425,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
 /*****************************************************************************
  * SPI
  ****************************************************************************/
-void __init kirkwood_spi_init()
+void __init kirkwood_spi_init(void)
 {
 	orion_spi_init(SPI_PHYS_BASE);
 }
@@ -646,8 +646,7 @@ void __init kirkwood_l2_init(void)
 
 void __init kirkwood_init(void)
 {
-	printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
-		kirkwood_id(), kirkwood_tclk);
+	pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
 
 	/*
 	 * Disable propagation of mbus errors to the CPU local bus,
@@ -671,7 +670,7 @@ void __init kirkwood_init(void)
 	kirkwood_xor1_init();
 	kirkwood_crypto_init();
 
-#ifdef CONFIG_KEXEC 
+#ifdef CONFIG_KEXEC
 	kexec_reinit = kirkwood_enable_pcie;
 #endif
 }

arch/arm/mach-kirkwood/common.h

@@ -47,7 +47,8 @@ void kirkwood_i2c_init(void);
 void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
-void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
+void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
+			    int (*dev_ready)(struct mtd_info *));
 void kirkwood_audio_init(void);
 void kirkwood_restart(char, const char *);
 void kirkwood_clk_init(void);

arch/arm/mach-kirkwood/cpuidle.c

@@ -64,7 +64,7 @@ static int kirkwood_init_cpuidle(void)
 
 	cpuidle_register_driver(&kirkwood_idle_driver);
 	if (cpuidle_register_device(device)) {
-		printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+		pr_err("kirkwood_init_cpuidle: Failed registering\n");
 		return -EIO;
 	}
 	return 0;

arch/arm/mach-kirkwood/dockstar-setup.c

@@ -93,7 +93,7 @@ static void __init dockstar_init(void)
 
 	if (gpio_request(29, "USB Power Enable") != 0 ||
 	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&dockstar_ge00_data);

arch/arm/mach-kirkwood/irq.c

@@ -14,6 +14,7 @@
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
+#include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
 	IRQ_KIRKWOOD_GPIO_LOW_0_7,

arch/arm/mach-kirkwood/lacie_v2-common.c

@@ -19,6 +19,7 @@
 #include <mach/irqs.h>
 #include <plat/time.h>
 #include "common.h"
+#include "lacie_v2-common.h"
 
 /*****************************************************************************
  * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)

arch/arm/mach-kirkwood/mpp.c

@@ -30,8 +30,8 @@ static unsigned int __init kirkwood_variant(void)
 	if (dev == MV88F6180_DEV_ID)
 		return MPP_F6180_MASK;
 
-	printk(KERN_ERR "MPP setup: unknown kirkwood variant "
-			"(dev %#x rev %#x)\n", dev, rev);
+	pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
+	       dev, rev);
 	return 0;
 }
 

arch/arm/mach-kirkwood/netspace_v2-setup.c

@@ -79,7 +79,7 @@ static struct platform_device netspace_v2_gpio_buttons = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.dev		= {
-		.platform_data 	= &netspace_v2_button_data,
+		.platform_data	= &netspace_v2_button_data,
 	},
 };
 
@@ -211,7 +211,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
 	MPP29_GPIO,		/* Blue led (slow register) */
 	MPP30_GPIO,		/* Blue led (command register) */
 	MPP31_GPIO,		/* Board power off */
-	MPP32_GPIO, 		/* Power button (0 = Released, 1 = Pushed) */
+	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
 	MPP33_GPO,		/* Fan speed (bit 2) */
 	0
 };

arch/arm/mach-kirkwood/openrd-setup.c

@@ -121,14 +121,12 @@ static int __init uart1_mpp_config(void)
 	kirkwood_mpp_conf(openrd_uart1_mpp_config);
 
 	if (gpio_request(34, "SD_UART1_SEL")) {
-		printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
-				", gpio: 34\n");
+		pr_err("GPIO request 34 failed for SD/UART1 selection\n");
 		return -EIO;
 	}
 
 	if (gpio_request(28, "RS232_RS485_SEL")) {
-		printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
-				", gpio# 28\n");
+		pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
 		gpio_free(34);
 		return -EIO;
 	}
@@ -185,15 +183,13 @@ static void __init openrd_init(void)
 
 	if (uart1 <= 0) {
 		if (uart1 < 0)
-			printk(KERN_ERR "Invalid kernel parameter to select "
-				"UART1. Defaulting to SD. ERROR CODE: %d\n",
-				uart1);
+			pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
+			       uart1);
 
 		/* Select SD
 		 * Pin # 34: 0 => UART1, 1 => SD */
 		if (gpio_request(34, "SD_UART1_SEL")) {
-			printk(KERN_ERR "GPIO request failed for SD/UART1 "
-					"selection, gpio: 34\n");
+			pr_err("GPIO request 34 failed for SD/UART1 selection\n");
 		} else {
 
 			gpio_direction_output(34, 1);

arch/arm/mach-kirkwood/pcie.c

@@ -26,7 +26,7 @@ static void kirkwood_enable_pcie_clk(const char *port)
 
 	clk = clk_get_sys("pcie", port);
 	if (IS_ERR(clk)) {
-		printk(KERN_ERR "PCIE clock %s missing\n", port);
+		pr_err("PCIE clock %s missing\n", port);
 		return;
 	}
 	clk_prepare_enable(clk);
@@ -168,7 +168,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 		return 0;
 
 	index = pcie_port_map[nr];
-	printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
+	pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
 
 	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
 	if (!pp)
@@ -186,7 +186,8 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 	case 1:
 		kirkwood_enable_pcie_clk("1");
 		pcie1_ioresources_init(pp);
-		pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
+		pci_ioremap_io(SZ_64K * sys->busnr,
+			       KIRKWOOD_PCIE1_IO_PHYS_BASE);
 		break;
 	default:
 		panic("PCIe setup: invalid controller %d", index);
@@ -224,22 +225,6 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
 
-static struct pci_bus __init *
-kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct pci_bus *bus;
-
-	if (nr < num_pcie_ports) {
-		bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
-					&sys->resources);
-	} else {
-		bus = NULL;
-		BUG();
-	}
-
-	return bus;
-}
-
 static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 	u8 pin)
 {
@@ -251,19 +236,19 @@ static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
 
 static struct hw_pci kirkwood_pci __initdata = {
 	.setup		= kirkwood_pcie_setup,
-	.scan		= kirkwood_pcie_scan_bus,
 	.map_irq	= kirkwood_pcie_map_irq,
+	.ops            = &pcie_ops,
 };
 
 static void __init add_pcie_port(int index, void __iomem *base)
 {
-	printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
+	pr_info("Kirkwood PCIe port %d: ", index);
 
 	if (orion_pcie_link_up(base)) {
-		printk(KERN_INFO "link up\n");
+		pr_info("link up\n");
 		pcie_port_map[num_pcie_ports++] = index;
 	} else
-		printk(KERN_INFO "link down, ignoring\n");
+		pr_info("link down, ignoring\n");
 }
 
 void __init kirkwood_pcie_init(unsigned int portmask)

arch/arm/mach-kirkwood/sheevaplug-setup.c

@@ -117,7 +117,7 @@ static void __init sheevaplug_init(void)
 
 	if (gpio_request(29, "USB Power Enable") != 0 ||
 	    gpio_direction_output(29, 1) != 0)
-		printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+		pr_err("can't set up GPIO 29 (USB Power Enable)\n");
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&sheevaplug_ge00_data);

arch/arm/mach-kirkwood/t5325-setup.c

@@ -29,7 +29,7 @@
 #include "common.h"
 #include "mpp.h"
 
-struct mtd_partition hp_t5325_partitions[] = {
+static struct mtd_partition hp_t5325_partitions[] = {
 	{
 		.name		= "u-boot env",
 		.size		= SZ_64K,
@@ -59,14 +59,14 @@ struct mtd_partition hp_t5325_partitions[] = {
 	},
 };
 
-const struct flash_platform_data hp_t5325_flash = {
+static const struct flash_platform_data hp_t5325_flash = {
 	.type		= "mx25l8005",
 	.name		= "spi_flash",
 	.parts		= hp_t5325_partitions,
 	.nr_parts	= ARRAY_SIZE(hp_t5325_partitions),
 };
 
-struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
+static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
 	{
 		.modalias	= "m25p80",
 		.platform_data	= &hp_t5325_flash,

arch/arm/mach-kirkwood/ts41x-setup.c

@@ -170,8 +170,7 @@ static int __init ts41x_pci_init(void)
 		else
 			kirkwood_pcie_init(KW_PCIE0);
 	}
-
-   return 0;
+	return 0;
 }
 subsys_initcall(ts41x_pci_init);
 

arch/arm/mach-kirkwood/tsx1x-common.c

@@ -7,6 +7,7 @@
 #include <linux/serial_reg.h>
 #include <mach/kirkwood.h>
 #include "common.h"
+#include "tsx1x-common.h"
 
 /*
  * QNAP TS-x1x Boards flash
@@ -29,7 +30,7 @@
  *
  ***************************************************************************/
 
-struct mtd_partition qnap_tsx1x_partitions[] = {
+static struct mtd_partition qnap_tsx1x_partitions[] = {
 	{
 		.name		= "U-Boot",
 		.size		= 0x00080000,
@@ -58,14 +59,14 @@ struct mtd_partition qnap_tsx1x_partitions[] = {
 	},
 };
 
-const struct flash_platform_data qnap_tsx1x_flash = {
+static const struct flash_platform_data qnap_tsx1x_flash = {
 	.type		= "m25p128",
 	.name		= "spi_flash",
 	.parts		= qnap_tsx1x_partitions,
 	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
 };
 
-struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
 	{
 		.modalias	= "m25p80",
 		.platform_data	= &qnap_tsx1x_flash,