[SCSI] qla2xxx: Make the logging functions verify their arguments and fixed the current broken uses as appropriate.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_attr.c

@@ -667,7 +667,7 @@ qla2x00_sysfs_write_edc(struct file *filp, struct kobject *kobj,
 	    dev, adr, len, opt);
 	if (rval != QLA_SUCCESS) {
 		ql_log(ql_log_warn, vha, 0x7074,
-		    "Unable to write EDC (%x) %02x:%04x:%02x:%02hhx\n",
+		    "Unable to write EDC (%x) %02x:%04x:%02x:%02x:%02hhx\n",
 		    rval, dev, adr, opt, len, buf[8]);
 		return -EIO;
 	}
@@ -724,7 +724,7 @@ qla2x00_sysfs_write_edc_status(struct file *filp, struct kobject *kobj,
 			dev, adr, len, opt);
 	if (rval != QLA_SUCCESS) {
 		ql_log(ql_log_info, vha, 0x7075,
-		    "Unable to write EDC status (%x) %02x:%04x:%02x.\n",
+		    "Unable to write EDC status (%x) %02x:%04x:%02x:%02x.\n",
 		    rval, dev, adr, opt, len);
 		return -EIO;
 	}

drivers/scsi/qla2xxx/qla_dbg.h

@@ -244,14 +244,14 @@ struct qla2xxx_fw_dump {
 
 extern int ql_errlev;
 
-void
+void __attribute__((format (printf, 4, 5)))
 ql_dbg(uint32_t, scsi_qla_host_t *vha, int32_t, const char *fmt, ...);
-void
+void __attribute__((format (printf, 4, 5)))
 ql_dbg_pci(uint32_t, struct pci_dev *pdev, int32_t, const char *fmt, ...);
 
-void
+void __attribute__((format (printf, 4, 5)))
 ql_log(uint32_t, scsi_qla_host_t *vha, int32_t, const char *fmt, ...);
-void
+void __attribute__((format (printf, 4, 5)))
 ql_log_pci(uint32_t, struct pci_dev *pdev, int32_t, const char *fmt, ...);
 
 /* Debug Levels */

drivers/scsi/qla2xxx/qla_init.c

@@ -4188,7 +4188,8 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 		spin_unlock_irqrestore(&ha->vport_slock, flags);
 
 	} else {
-		ql_log(ql_log_warn, vha, 0x8023, "%s **** FAILED ****.\n");
+		ql_log(ql_log_warn, vha, 0x8023, "%s **** FAILED ****.\n",
+		       __func__);
 	}
 
 	return(status);

drivers/scsi/qla2xxx/qla_iocb.c

@@ -1004,7 +1004,7 @@ qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd,
 		sle_dma = sg_dma_address(sg);
 		ql_dbg(ql_dbg_io, vha, 0x300a,
 		    "sg entry %d - addr=0x%x 0x%x, " "len=%d for cmd=%p.\n",
-		    cur_dsd, i, LSD(sle_dma), MSD(sle_dma), sg_dma_len(sg),
+		    i, LSD(sle_dma), MSD(sle_dma), sg_dma_len(sg),
 		    sp->cmd);
 		*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
 		*cur_dsd++ = cpu_to_le32(MSD(sle_dma));

drivers/scsi/qla2xxx/qla_isr.c

@@ -298,7 +298,7 @@ qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr)
 		return;
 
 	ql_dbg(ql_dbg_async, vha, 0x5022,
-	    "Inter-Driver Commucation %s -- ACK timeout=%d.\n",
+	    "%lu Inter-Driver Communication %s -- ACK timeout=%d.\n",
 	    vha->host_no, event[aen & 0xff], timeout);
 
 	rval = qla2x00_post_idc_ack_work(vha, mb);

drivers/scsi/qla2xxx/qla_nx.c

@@ -369,7 +369,7 @@ qla82xx_pci_set_crbwindow_2M(struct qla_hw_data *ha, ulong *off)
 		ql_dbg(ql_dbg_p3p, vha, 0xb000,
 		    "%s: Written crbwin (0x%x) "
 		    "!= Read crbwin (0x%x), off=0x%lx.\n",
-		    ha->crb_win, win_read, *off);
+		    __func__, ha->crb_win, win_read, *off);
 	}
 	*off = (*off & MASK(16)) + CRB_INDIRECT_2M + ha->nx_pcibase;
 }
@@ -409,7 +409,7 @@ qla82xx_pci_set_crbwindow(struct qla_hw_data *ha, u64 off)
 	}
 	/* strange address given */
 	ql_dbg(ql_dbg_p3p, vha, 0xb001,
-	    "%x: Warning: unm_nic_pci_set_crbwindow "
+	    "%s: Warning: unm_nic_pci_set_crbwindow "
 	    "called with an unknown address(%llx).\n",
 	    QLA2XXX_DRIVER_NAME, off);
 	return off;
@@ -1711,12 +1711,12 @@ qla82xx_iospace_config(struct qla_hw_data *ha)
 	ql_dbg_pci(ql_dbg_multiq, ha->pdev, 0xc006,
 	    "nx_pci_base=%p iobase=%p "
 	    "max_req_queues=%d msix_count=%d.\n",
-	    ha->nx_pcibase, ha->iobase,
+	    (void *)ha->nx_pcibase, ha->iobase,
 	    ha->max_req_queues, ha->msix_count);
 	ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0010,
 	    "nx_pci_base=%p iobase=%p "
 	    "max_req_queues=%d msix_count=%d.\n",
-	    ha->nx_pcibase, ha->iobase,
+	    (void *)ha->nx_pcibase, ha->iobase,
 	    ha->max_req_queues, ha->msix_count);
 	return 0;
 
@@ -1744,7 +1744,7 @@ qla82xx_pci_config(scsi_qla_host_t *vha)
 	ret = pci_set_mwi(ha->pdev);
 	ha->chip_revision = ha->pdev->revision;
 	ql_dbg(ql_dbg_init, vha, 0x0043,
-	    "Chip revision:%ld.\n",
+	    "Chip revision:%d.\n",
 	    ha->chip_revision);
 	return 0;
 }
@@ -3661,8 +3661,7 @@ qla82xx_check_md_needed(scsi_qla_host_t *vha)
 				qla82xx_md_prep(vha);
 			} else
 				ql_log(ql_log_info, vha, 0xb02e,
-				    "Firmware dump available to retrieve\n",
-				    vha->host_no);
+				    "Firmware dump available to retrieve\n");
 		}
 	}
 	return rval;
@@ -4067,7 +4066,7 @@ int qla2x00_wait_for_fcoe_ctx_reset(scsi_qla_host_t *vha)
 		}
 	}
 	ql_dbg(ql_dbg_p3p, vha, 0xb027,
-	    "%s status=%d.\n", status);
+	       "%s: status=%d.\n", __func__, status);
 
 	return status;
 }

drivers/scsi/qla2xxx/qla_os.c

@@ -1017,7 +1017,7 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
 eh_reset_failed:
 	ql_log(ql_log_info, vha, 0x800f,
 	    "%s RESET FAILED: %s for id %d lun %d cmd=%p.\n", name,
-	    reset_errors[err], cmd->device->id, cmd->device->lun);
+	    reset_errors[err], cmd->device->id, cmd->device->lun, cmd);
 	return FAILED;
 }
 
@@ -1819,7 +1819,7 @@ qla2x00_set_isp_flags(struct qla_hw_data *ha)
 	else
 		ha->flags.port0 = 0;
 	ql_dbg_pci(ql_dbg_init, ha->pdev, 0x000b,
-	    "device_type=0x%x port=%d fw_srisc_address=%p.\n",
+	    "device_type=0x%x port=%d fw_srisc_address=0x%x.\n",
 	    ha->device_type, ha->flags.port0, ha->fw_srisc_address);
 }
 
@@ -1860,8 +1860,8 @@ qla2x00_iospace_config(struct qla_hw_data *ha)
 	}
 	ha->pio_address = pio;
 	ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0014,
-	    "PIO address=%p.\n",
-	    ha->pio_address);
+	    "PIO address=%llu.\n",
+	    (unsigned long long)ha->pio_address);
 
 skip_pio:
 	/* Use MMIO operations for all accesses. */
@@ -2227,7 +2227,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ql_dbg(ql_dbg_init, base_vha, 0x0033,
 	    "max_id=%d this_id=%d "
 	    "cmd_per_len=%d unique_id=%d max_cmd_len=%d max_channel=%d "
-	    "max_lun=%d transportt=%p, vendor_id=%d.\n", host->max_id,
+	    "max_lun=%d transportt=%p, vendor_id=%llu.\n", host->max_id,
 	    host->this_id, host->cmd_per_lun, host->unique_id,
 	    host->max_cmd_len, host->max_channel, host->max_lun,
 	    host->transportt, sht->vendor_id);
@@ -2833,7 +2833,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
 		if (!ha->sns_cmd)
 			goto fail_dma_pool;
 		ql_dbg_pci(ql_dbg_init, ha->pdev, 0x0026,
-		    "sns_cmd.\n", ha->sns_cmd);
+		    "sns_cmd: %p.\n", ha->sns_cmd);
 	} else {
 	/* Get consistent memory allocated for MS IOCB */
 		ha->ms_iocb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,

drivers/scsi/qla2xxx/qla_sup.c

@@ -904,8 +904,9 @@ no_flash_data:
 	}
 done:
 	ql_dbg(ql_dbg_init, vha, 0x004d,
-	    "FDT[%x]: (0x%x/0x%x) erase=0x%x "
-	    "pr=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid,
+	    "FDT[%s]: (0x%x/0x%x) erase=0x%x "
+	    "pr=%x wrtd=0x%x blk=0x%x.\n",
+	    loc, mid, fid,
 	    ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd,
 	    ha->fdt_wrt_disable, ha->fdt_block_size);