ASoC: davinci: Add support for AM33xx SoC Audio

AM33xx uses same McASP IP as the Davinci Platform. This patch updates
Kconfig and makefile to enable build for McASP, PCM & Codec drivers.

Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

sound/soc/davinci/Kconfig

@@ -1,9 +1,10 @@
 config SND_DAVINCI_SOC
-	tristate "SoC Audio for the TI DAVINCI chip"
-	depends on ARCH_DAVINCI
+	tristate "SoC Audio for the TI DAVINCI or AM33XX chip"
+	depends on ARCH_DAVINCI || SOC_AM33XX
 	help
+	  Platform driver for daVinci or AM33xx
 	  Say Y or M if you want to add support for codecs attached to
-	  the DAVINCI AC97 or I2S interface. You will also need
+	  the DAVINCI AC97, I2S, or McASP interface. You will also need
 	  to select the audio interfaces to support below.
 
 config SND_DAVINCI_SOC_I2S
@@ -15,6 +16,17 @@ config SND_DAVINCI_SOC_MCASP
 config SND_DAVINCI_SOC_VCIF
 	tristate
 
+config SND_AM33XX_SOC_EVM
+	tristate "SoC Audio for the AM33XX chip based boards"
+	depends on SND_DAVINCI_SOC && SOC_AM33XX
+	select SND_SOC_TLV320AIC3X
+	select SND_DAVINCI_SOC_MCASP
+	help
+	  Say Y or M if you want to add support for SoC audio on AM33XX
+	  boards using McASP and TLV320AIC3X codec. For example AM335X-EVM,
+	  AM335X-EVMSK, and BeagelBone with AudioCape boards have this
+	  setup.
+
 config SND_DAVINCI_SOC_EVM
 	tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM"
 	depends on SND_DAVINCI_SOC

sound/soc/davinci/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_SND_DAVINCI_SOC_VCIF) += snd-soc-davinci-vcif.o
 snd-soc-evm-objs := davinci-evm.o
 
 obj-$(CONFIG_SND_DAVINCI_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_AM33XX_SOC_EVM) += snd-soc-evm.o
 obj-$(CONFIG_SND_DM6467_SOC_EVM) += snd-soc-evm.o
 obj-$(CONFIG_SND_DA830_SOC_EVM) += snd-soc-evm.o
 obj-$(CONFIG_SND_DA850_SOC_EVM) += snd-soc-evm.o