Merge tag 'imx-fixes-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes

From Shawn Guo, imx fixes for 3.11:

- A few device tree source fixes regarding pinctrl, clock, and pwm
  backlight.
- Fixes imx28 and imx51 audio driver failure caused by sgtl5000 codec
  driver change by supplying the correct clock for codec.
- imx6q emi_sel clock muxing and imx6q-iomuxc-gpr macro fixes

* tag 'imx-fixes-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: dts: imx51-babbage: Pass a real clock to the codec
  ARM i.MX53: mba53: Fix PWM backlight DT node
  ARM: imx: fix vf610 enet module clock selection
  ARM: mxs: saif0 is the clock provider to sgtl5000
  ARM: i.MX6Q: correct emi_sel clock muxing
  ARM i.MX6Q: Fix IOMUXC GPR1 defines for ENET_CLK_SEL and IPU1/2_MUX
  ARM: i.MX27: Typo fix
  ARM: imx27: Fix documentation for SPLL clock
  ARM i.MX53: Fix UART pad configuration

Documentation/devicetree/bindings/clock/imx27-clock.txt

@@ -98,6 +98,7 @@ clocks and IDs.
 	fpm                  83
 	mpll_osc_sel         84
 	mpll_sel             85
+	spll_gate	     86
 
 Examples:
 

arch/arm/boot/dts/imx28-apx4devkit.dts

@@ -147,7 +147,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				pcf8563: rtc@51 {

arch/arm/boot/dts/imx28-evk.dts

@@ -195,7 +195,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				at24@51 {

arch/arm/boot/dts/imx28-m28evk.dts

@@ -184,7 +184,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				eeprom: eeprom@51 {

arch/arm/boot/dts/imx28.dtsi

@@ -837,6 +837,7 @@
 				compatible = "fsl,imx28-saif";
 				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
+				#clock-cells = <0>;
 				clocks = <&clks 53>;
 				dmas = <&dma_apbx 4>;
 				dma-names = "rx-tx";

arch/arm/boot/dts/imx51-babbage.dts

@@ -61,6 +61,16 @@
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
+
+	clocks {
+		clk_26M: codec_clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			gpios = <&gpio4 26 1>;
+		};
+	};
 };
 
 &esdhc1 {
@@ -229,6 +239,7 @@
 				MX51_PAD_EIM_A27__GPIO2_21   0x5
 				MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
 				MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
+				MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
 			>;
 		};
 	};
@@ -255,7 +266,7 @@
 	sgtl5000: codec@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clock-frequency = <26000000>;
+		clocks = <&clk_26M>;
 		VDDA-supply = <&vdig_reg>;
 		VDDIO-supply = <&vvideo_reg>;
 	};

arch/arm/boot/dts/imx53-mba53.dts

@@ -27,7 +27,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000 0 0>;
+		pwms = <&pwm2 0 50000>;
 		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
 		default-brightness-level = <10>;
 		enable-gpios = <&gpio7 7 0>;

arch/arm/boot/dts/imx53.dtsi

@@ -725,15 +725,15 @@
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
-							MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
-							MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
+							MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+							MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
 						>;
 					};
 
 					pinctrl_uart1_2: uart1grp-2 {
 						fsl,pins = <
-							MX53_PAD_PATA_DIOW__UART1_TXD_MUX  0x1c5
-							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
+							MX53_PAD_PATA_DIOW__UART1_TXD_MUX  0x1e4
+							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
 						>;
 					};
 
@@ -748,8 +748,8 @@
 				uart2 {
 					pinctrl_uart2_1: uart2grp-1 {
 						fsl,pins = <
-							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
-							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1c5
+							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1e4
 						>;
 					};
 
@@ -766,17 +766,17 @@
 				uart3 {
 					pinctrl_uart3_1: uart3grp-1 {
 						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
-							MX53_PAD_PATA_DA_1__UART3_CTS	  0x1c5
-							MX53_PAD_PATA_DA_2__UART3_RTS	  0x1c5
+							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+							MX53_PAD_PATA_DA_1__UART3_CTS	  0x1e4
+							MX53_PAD_PATA_DA_2__UART3_RTS	  0x1e4
 						>;
 					};
 
 					pinctrl_uart3_2: uart3grp-2 {
 						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
+							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
 						>;
 					};
 
@@ -785,8 +785,8 @@
 				uart4 {
 					pinctrl_uart4_1: uart4grp-1 {
 						fsl,pins = <
-							MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
-							MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
+							MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
+							MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
 						>;
 					};
 				};
@@ -794,8 +794,8 @@
 				uart5 {
 					pinctrl_uart5_1: uart5grp-1 {
 						fsl,pins = <
-							MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
-							MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
+							MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
+							MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
 						>;
 					};
 				};

arch/arm/boot/dts/vf610.dtsi

@@ -442,8 +442,8 @@
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
 				interrupts = <0 78 0x04>;
-				clocks = <&clks VF610_CLK_ENET>,
-					<&clks VF610_CLK_ENET>,
+				clocks = <&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
@@ -453,8 +453,8 @@
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d1000 0x1000>;
 				interrupts = <0 79 0x04>;
-				clocks = <&clks VF610_CLK_ENET>,
-					<&clks VF610_CLK_ENET>,
+				clocks = <&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";

arch/arm/mach-imx/clk-imx6q.c

@@ -199,7 +199,8 @@ static const char *pcie_axi_sels[]	= { "axi", "ahb", };
 static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
 static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
-static const char *emi_sels[]		= { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *emi_sels[]		= { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
+static const char *emi_slow_sels[]      = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *vdo_axi_sels[]	= { "axi", "ahb", };
 static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
@@ -392,7 +393,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[usdhc4_sel]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
 	clk[enfc_sel]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
 	clk[emi_sel]          = imx_clk_mux("emi_sel",          base + 0x1c, 27, 2, emi_sels,          ARRAY_SIZE(emi_sels));
-	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_sels,          ARRAY_SIZE(emi_sels));
+	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_slow_sels,     ARRAY_SIZE(emi_slow_sels));
 	clk[vdo_axi_sel]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
 	clk[vpu_axi_sel]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
 	clk[cko1_sel]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));

arch/arm/mach-imx/clk-vf610.c

@@ -183,6 +183,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
 	clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
 	clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23);
+	clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0));
+	clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1));
 
 	clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
 

arch/arm/mach-imx/mx27.h

@@ -135,7 +135,7 @@
 #define MX27_INT_GPT4		(NR_IRQS_LEGACY + 4)
 #define MX27_INT_RTIC		(NR_IRQS_LEGACY + 5)
 #define MX27_INT_CSPI3		(NR_IRQS_LEGACY + 6)
-#define MX27_INT_SDHC		(NR_IRQS_LEGACY + 7)
+#define MX27_INT_MSHC		(NR_IRQS_LEGACY + 7)
 #define MX27_INT_GPIO		(NR_IRQS_LEGACY + 8)
 #define MX27_INT_SDHC3		(NR_IRQS_LEGACY + 9)
 #define MX27_INT_SDHC2		(NR_IRQS_LEGACY + 10)

include/dt-bindings/clock/vf610-clock.h

@@ -158,6 +158,8 @@
 #define VF610_CLK_GPU_SEL		145
 #define VF610_CLK_GPU_EN		146
 #define VF610_CLK_GPU2D			147
-#define VF610_CLK_END			148
+#define VF610_CLK_ENET0			148
+#define VF610_CLK_ENET1			149
+#define VF610_CLK_END			150
 
 #endif /* __DT_BINDINGS_CLOCK_VF610_H */

include/linux/mfd/syscon/imx6q-iomuxc-gpr.h

@@ -103,15 +103,15 @@
 #define IMX6Q_GPR1_EXC_MON_MASK			BIT(22)
 #define IMX6Q_GPR1_EXC_MON_OKAY			0x0
 #define IMX6Q_GPR1_EXC_MON_SLVE			BIT(22)
-#define IMX6Q_GPR1_MIPI_IPU2_SEL_MASK		BIT(21)
-#define IMX6Q_GPR1_MIPI_IPU2_SEL_GASKET		0x0
-#define IMX6Q_GPR1_MIPI_IPU2_SEL_IOMUX		BIT(21)
-#define IMX6Q_GPR1_MIPI_IPU1_MUX_MASK		BIT(20)
-#define IMX6Q_GPR1_MIPI_IPU1_MUX_GASKET		0x0
-#define IMX6Q_GPR1_MIPI_IPU1_MUX_IOMUX		BIT(20)
-#define IMX6Q_GPR1_MIPI_IPU2_MUX_MASK		BIT(19)
+#define IMX6Q_GPR1_ENET_CLK_SEL_MASK		BIT(21)
+#define IMX6Q_GPR1_ENET_CLK_SEL_PAD		0
+#define IMX6Q_GPR1_ENET_CLK_SEL_ANATOP		BIT(21)
+#define IMX6Q_GPR1_MIPI_IPU2_MUX_MASK		BIT(20)
 #define IMX6Q_GPR1_MIPI_IPU2_MUX_GASKET		0x0
-#define IMX6Q_GPR1_MIPI_IPU2_MUX_IOMUX		BIT(19)
+#define IMX6Q_GPR1_MIPI_IPU2_MUX_IOMUX		BIT(20)
+#define IMX6Q_GPR1_MIPI_IPU1_MUX_MASK		BIT(19)
+#define IMX6Q_GPR1_MIPI_IPU1_MUX_GASKET		0x0
+#define IMX6Q_GPR1_MIPI_IPU1_MUX_IOMUX		BIT(19)
 #define IMX6Q_GPR1_PCIE_TEST_PD			BIT(18)
 #define IMX6Q_GPR1_IPU_VPU_MUX_MASK		BIT(17)
 #define IMX6Q_GPR1_IPU_VPU_MUX_IPU1		0x0