Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits)
  omap: mailbox: reorganize headers
  omap: mailbox: standarize on 'omap-mailbox'
  omap: mailbox: only compile for configured archs
  omap: mailbox: simplify omap_mbox_register()
  omap: mailbox: reorganize registering
  omap: mailbox: add IRQ names
  omap: mailbox: remove unecessary fields
  omap: mailbox: don't export unecessary symbols
  omap: mailbox: update omap1 probing
  omap: mailbox: use correct config for omap1
  omap: mailbox: 2420 should be detected at run-time
  omap: mailbox: reorganize structures
  omap: mailbox: trivial cleanups
  omap mailbox: Set a device in logical mbox instance for traceability
  omap: mailbox: convert block api to kfifo
  omap: mailbox: remove (un)likely macros from cold paths
  omap: mailbox cleanup: split MODULE_AUTHOR line
  omap: mailbox: convert rwlocks to spinlock
  Mailbox: disable mailbox interrupt when request queue
  Mailbox: new mutext lock for h/w mailbox configuration
  ...

arch/arm/configs/am3517_evm_defconfig

@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3517EVM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
-CONFIG_CAN_VCAN=y
-CONFIG_CAN_DEV=y
-CONFIG_CAN_CALC_BITTIMING=y
-CONFIG_CAN_TI_HECC=y
-CONFIG_CAN_DEBUG_DEVICES=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_GENERIC=y
-CONFIG_PANEL_SHARP_LQ043T1DG01=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/cm_t35_defconfig

@@ -1,157 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_CM_T35=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_LIB80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TWL4030=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=m
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/devkit8000_defconfig

@@ -1,184 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_DEVKIT8000=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root  delay=3"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_BT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=40960
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_MATRIX=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIO_RAW=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_RAW_DRIVER=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-CONFIG_OMAP2_DSS=y
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_GENERIC=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=m
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_T10DIF=m
-CONFIG_LIBCRC32C=y

arch/arm/configs/igep0020_defconfig

@@ -1,179 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_IGEP0020=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_ONENAND_2X_PROGRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_SDIO=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_SSB=m
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=14
-# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_VENC is not set
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_USE_DSI_PLL=y
-CONFIG_FB_OMAP2=y
-# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-CONFIG_PANEL_GENERIC=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_IGEP0020=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap3_beagle_defconfig

@@ -1,134 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-# CONFIG_OMAP_MUX is not set
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3_BEAGLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap3_evm_defconfig

@@ -1,160 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3EVM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4
-CONFIG_FB_OMAP2=y
-# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
-CONFIG_PANEL_GENERIC=y
-CONFIG_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap3_pandora_defconfig

@@ -1,158 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3_PANDORA=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_TPO_TD043MTEA1=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_PERIPHERAL=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CIFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=y

arch/arm/configs/omap3_stalker_lks_defconfig

@@ -1,150 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_SBC3530=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap3_touchbook_defconfig

@@ -1,621 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP3_TOUCHBOOK=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_KEXEC=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_DIAG=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_IPV6_MROUTE=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_IPV6=y
-CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_DCCP=m
-CONFIG_IP_SCTP=m
-CONFIG_TIPC=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_WAN_ROUTER=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_IND=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=y
-CONFIG_BT_HCIBTSDIO=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-CONFIG_BT_HCIBFUSB=y
-CONFIG_AF_RXRPC=m
-CONFIG_CFG80211=m
-CONFIG_LIB80211=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_WIMAX=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_93CX6=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ISCSI_TCP=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_ATM_DRIVERS is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_NETCONSOLE=m
-CONFIG_NETCONSOLE_DYNAMIC=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_BATTERY_BQ27x00=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=m
-# CONFIG_SND_ARM is not set
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OXU210HP_HCD=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_IUU=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_MOTOROLA=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SIEMENS_MPI=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_TI=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_OPTICON=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_SISUSBVGA_CON=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ZERO_HNPTEST=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_USB_G_PRINTER=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=m
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_UIO=m
-CONFIG_UIO_PDRV=m
-CONFIG_UIO_PDRV_GENIRQ=m
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_JFS_FS=m
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_JFFS2_CMODE_FAVOURLZO=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_CIFS_EXPERIMENTAL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_EFI_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_FIPS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=m
-CONFIG_CRYPTO_RMD160=m
-CONFIG_CRYPTO_RMD256=m
-CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SALSA20=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap_2430sdp_defconfig

@@ -1,136 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-# CONFIG_OMAP_MUX_WARNINGS is not set
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP2430=y
-CONFIG_MACH_OMAP_2430SDP=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=m
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=m
-CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap_3430sdp_defconfig

@@ -1,178 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_3430SDP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_VRAM_SIZE=4
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_GENERIC=y
-CONFIG_PANEL_SHARP_LS037V7DW01=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap_3630sdp_defconfig

@@ -1,154 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_3630SDP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap_apollon_2420_defconfig

@@ -1,92 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-# CONFIG_OMAP_MCBSP is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_MACH_OMAP_APOLLON=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_HID is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_CRC_CCITT=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap_h4_2420_defconfig

@@ -1,107 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_ARCH_OMAP2420=y
-CONFIG_MACH_OMAP_H4=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_IRDA=y
-CONFIG_IRLAN=y
-CONFIG_IRCOMM=y
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_OMAP=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_MENELAUS=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap_ldp_defconfig

@@ -1,135 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_LDP=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_OMAP=y
-CONFIG_FB_OMAP_LCD_VGA=y
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap_zoom2_defconfig

@@ -1,143 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_ZOOM2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/omap_zoom3_defconfig

@@ -1,155 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OMAP_ZOOM3=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_VFP=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_VERBOSE=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_W1=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_MUSB_DEBUG=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_AUDIO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/overo_defconfig

@@ -1,275 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_OVERO=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=" debug "
-CONFIG_KEXEC=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_EEPROM_LEGACY=y
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_ZD1201=m
-CONFIG_RTL8187=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_USB=y
-CONFIG_LIBERTAS_SDIO=y
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_SDIO_UART=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_XFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_LIBCRC32C=y

arch/arm/configs/rx51_defconfig

@@ -1,222 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_ARCH_OMAP3430=y
-CONFIG_MACH_NOKIA_RX51=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_PHONET=y
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_CFG80211=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_OMAP2=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=m
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_WATCHDOG=y
-CONFIG_OMAP_WATCHDOG=m
-CONFIG_TWL4030_WATCHDOG=m
-CONFIG_TWL4030_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_FB=y
-CONFIG_OMAP2_DSS=y
-# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
-# CONFIG_OMAP2_DSS_DPI is not set
-# CONFIG_OMAP2_DSS_VENC is not set
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_FB_OMAP2=y
-CONFIG_PANEL_ACX565AKM=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_HID=m
-CONFIG_USB_HID=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG_BLACKLIST_HUB=y
-CONFIG_USB_MON=y
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_OTG=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_NOKIA=m
-CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_OMAP_HS=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_TWL4030=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_TIMER_STATS=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_LOCK_STAT=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC7=m
-CONFIG_LIBCRC32C=y

arch/arm/mach-omap1/Kconfig

@@ -1,3 +1,7 @@
+if ARCH_OMAP1
+
+menu "TI OMAP1 specific features"
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP1
 
@@ -224,6 +228,12 @@ config OMAP_ARM_120MHZ
 	help
           Enable 120MHz clock for OMAP CPU. If unsure, say N.
 
+config OMAP_ARM_96MHZ
+	bool "OMAP ARM 96 MHz CPU"
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
+	help
+          Enable 96MHz clock for OMAP CPU. If unsure, say N.
+
 config OMAP_ARM_60MHZ
 	bool "OMAP ARM 60 MHz CPU"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
@@ -237,3 +247,6 @@ config OMAP_ARM_30MHZ
 	help
           Enable 30MHz clock for OMAP CPU. If unsure, say N.
 
+endmenu
+
+endif

arch/arm/mach-omap1/Makefile

@@ -23,6 +23,9 @@ obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
 
 led-y := leds.o
 
+usb-fs-$(CONFIG_USB)			:= usb.o
+obj-y					+= $(usb-fs-m) $(usb-fs-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o

arch/arm/mach-omap1/board-ams-delta.c

@@ -235,7 +235,7 @@ static void __init ams_delta_init(void)
 	/* Clear latch2 (NAND, LCD, modem enable) */
 	ams_delta_latch2_write(~0, 0);
 
-	omap_usb_init(&ams_delta_usb_config);
+	omap1_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
 #ifdef CONFIG_AMS_DELTA_FIQ

arch/arm/mach-omap1/board-fsample.c

@@ -292,6 +292,18 @@ static void __init omap_fsample_init(void)
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	omap_board_config = fsample_config;

arch/arm/mach-omap1/board-generic.c

@@ -72,12 +72,12 @@ static void __init omap_generic_init(void)
 		omap_cfg_reg(UART3_TX);
 		omap_cfg_reg(UART3_RX);
 
-		omap_usb_init(&generic1510_usb_config);
+		omap1_usb_init(&generic1510_usb_config);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (!cpu_is_omap1510()) {
-		omap_usb_init(&generic1610_usb_config);
+		omap1_usb_init(&generic1610_usb_config);
 	}
 #endif
 

arch/arm/mach-omap1/board-h2.c

@@ -292,15 +292,6 @@ static struct platform_device h2_kp_device = {
 
 #define H2_IRDA_FIRSEL_GPIO_PIN	17
 
-#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
-static int h2_transceiver_mode(struct device *dev, int state)
-{
-	/* SIR when low, else MIR/FIR when HIGH */
-	gpio_set_value(H2_IRDA_FIRSEL_GPIO_PIN, !(state & IR_SIRMODE));
-	return 0;
-}
-#endif
-
 static struct omap_irda_config h2_irda_data = {
 	.transceiver_cap	= IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
 	.rx_channel		= OMAP_DMA_UART3_RX,
@@ -437,14 +428,18 @@ static void __init h2_init(void)
 	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
 	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
 
-	/* Irda */
-#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
-	omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
-	if (gpio_request(H2_IRDA_FIRSEL_GPIO_PIN, "IRDA mode") < 0)
-		BUG();
-	gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0);
-	h2_irda_data.transceiver_mode = h2_transceiver_mode;
-#endif
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
 
 	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
 	omap_board_config = h2_config;
@@ -452,7 +447,7 @@ static void __init h2_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
 			      ARRAY_SIZE(h2_i2c_board_info));
-	omap_usb_init(&h2_usb_config);
+	omap1_usb_init(&h2_usb_config);
 	h2_mmc_init();
 }
 

arch/arm/mach-omap1/board-h3.c

@@ -397,6 +397,19 @@ static void __init h3_init(void)
 	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
 	omap_cfg_reg(V2_1710_GPIO10);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	spi_register_board_info(h3_spi_board_info,
 				ARRAY_SIZE(h3_spi_board_info));
@@ -405,7 +418,7 @@ static void __init h3_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
 			      ARRAY_SIZE(h3_i2c_board_info));
-	omap_usb_init(&h3_usb_config);
+	omap1_usb_init(&h3_usb_config);
 	h3_mmc_init();
 }
 

arch/arm/mach-omap1/board-htcherald.c

@@ -287,7 +287,7 @@ static void __init htcherald_init(void)
 	htcherald_disable_watchdog();
 
 	htcherald_usb_enable();
-	omap_usb_init(&htcherald_usb_config);
+	omap1_usb_init(&htcherald_usb_config);
 }
 
 static void __init htcherald_init_irq(void)

arch/arm/mach-omap1/board-innovator.c

@@ -422,13 +422,13 @@ static void __init innovator_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
-		omap_usb_init(&innovator1510_usb_config);
+		omap1_usb_init(&innovator1510_usb_config);
 		innovator_config[1].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
-		omap_usb_init(&h2_usb_config);
+		omap1_usb_init(&h2_usb_config);
 		innovator_config[1].data = &innovator1610_lcd_config;
 	}
 #endif

arch/arm/mach-omap1/board-nokia770.c

@@ -32,7 +32,6 @@
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
-#include <plat/dsp_common.h>
 #include <plat/hwa742.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
@@ -242,138 +241,6 @@ static inline void nokia770_mmc_init(void)
 }
 #endif
 
-#if	defined(CONFIG_OMAP_DSP)
-/*
- * audio power control
- */
-#define	HEADPHONE_GPIO		14
-#define	AMPLIFIER_CTRL_GPIO	58
-
-static struct clk *dspxor_ck;
-static DEFINE_MUTEX(audio_pwr_lock);
-/*
- * audio_pwr_state
- * +--+-------------------------+---------------------------------------+
- * |-1|down			|power-up request -> 0			|
- * +--+-------------------------+---------------------------------------+
- * | 0|up			|power-down(1) request -> 1		|
- * |  |				|power-down(2) request -> (ignore)	|
- * +--+-------------------------+---------------------------------------+
- * | 1|up,			|power-up request -> 0			|
- * |  |received down(1) request	|power-down(2) request -> -1		|
- * +--+-------------------------+---------------------------------------+
- */
-static int audio_pwr_state = -1;
-
-static inline void aic23_power_up(void)
-{
-}
-static inline void aic23_power_down(void)
-{
-}
-
-/*
- * audio_pwr_up / down should be called under audio_pwr_lock
- */
-static void nokia770_audio_pwr_up(void)
-{
-	clk_enable(dspxor_ck);
-
-	/* Turn on codec */
-	aic23_power_up();
-
-	if (gpio_get_value(HEADPHONE_GPIO))
-		/* HP not connected, turn on amplifier */
-		gpio_set_value(AMPLIFIER_CTRL_GPIO, 1);
-	else
-		/* HP connected, do not turn on amplifier */
-		printk("HP connected\n");
-}
-
-static void codec_delayed_power_down(struct work_struct *work)
-{
-	mutex_lock(&audio_pwr_lock);
-	if (audio_pwr_state == -1)
-		aic23_power_down();
-	clk_disable(dspxor_ck);
-	mutex_unlock(&audio_pwr_lock);
-}
-
-static DECLARE_DELAYED_WORK(codec_power_down_work, codec_delayed_power_down);
-
-static void nokia770_audio_pwr_down(void)
-{
-	/* Turn off amplifier */
-	gpio_set_value(AMPLIFIER_CTRL_GPIO, 0);
-
-	/* Turn off codec: schedule delayed work */
-	schedule_delayed_work(&codec_power_down_work, HZ / 20);	/* 50ms */
-}
-
-static int
-nokia770_audio_pwr_up_request(struct dsp_kfunc_device *kdev, int stage)
-{
-	mutex_lock(&audio_pwr_lock);
-	if (audio_pwr_state == -1)
-		nokia770_audio_pwr_up();
-	/* force audio_pwr_state = 0, even if it was 1. */
-	audio_pwr_state = 0;
-	mutex_unlock(&audio_pwr_lock);
-	return 0;
-}
-
-static int
-nokia770_audio_pwr_down_request(struct dsp_kfunc_device *kdev, int stage)
-{
-	mutex_lock(&audio_pwr_lock);
-	switch (stage) {
-	case 1:
-		if (audio_pwr_state == 0)
-			audio_pwr_state = 1;
-		break;
-	case 2:
-		if (audio_pwr_state == 1) {
-			nokia770_audio_pwr_down();
-			audio_pwr_state = -1;
-		}
-		break;
-	}
-	mutex_unlock(&audio_pwr_lock);
-	return 0;
-}
-
-static struct dsp_kfunc_device nokia770_audio_device = {
-	.name	 = "audio",
-	.type	 = DSP_KFUNC_DEV_TYPE_AUDIO,
-	.enable  = nokia770_audio_pwr_up_request,
-	.disable = nokia770_audio_pwr_down_request,
-};
-
-static __init int omap_dsp_init(void)
-{
-	int ret;
-
-	dspxor_ck = clk_get(0, "dspxor_ck");
-	if (IS_ERR(dspxor_ck)) {
-		printk(KERN_ERR "couldn't acquire dspxor_ck\n");
-		return PTR_ERR(dspxor_ck);
-	}
-
-	ret = dsp_kfunc_device_register(&nokia770_audio_device);
-	if (ret) {
-		printk(KERN_ERR
-		       "KFUNC device registration faild: %s\n",
-		       nokia770_audio_device.name);
-		goto out;
-	}
-	return 0;
- out:
-	return ret;
-}
-#else
-#define omap_dsp_init()		do {} while (0)
-#endif	/* CONFIG_OMAP_DSP */
-
 static void __init omap_nokia770_init(void)
 {
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
@@ -382,11 +249,10 @@ static void __init omap_nokia770_init(void)
 	omap_gpio_init();
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
-	omap_dsp_init();
 	hwa742_dev_init();
 	ads7846_dev_init();
 	mipid_dev_init();
-	omap_usb_init(&nokia770_usb_config);
+	omap1_usb_init(&nokia770_usb_config);
 	nokia770_mmc_init();
 }
 

arch/arm/mach-omap1/board-osk.c

@@ -560,7 +560,7 @@ static void __init osk_init(void)
 	l |= (3 << 1);
 	omap_writel(l, USB_TRANSCEIVER_CTRL);
 
-	omap_usb_init(&osk_usb_config);
+	omap1_usb_init(&osk_usb_config);
 
 	/* irq for tps65010 chip */
 	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */

arch/arm/mach-omap1/board-palmte.c

@@ -213,90 +213,6 @@ static struct omap_lcd_config palmte_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-#ifdef CONFIG_APM
-/*
- * Values measured in 10 minute intervals averaged over 10 samples.
- * May differ slightly from device to device but should be accurate
- * enough to give basic idea of battery life left and trigger
- * potential alerts.
- */
-static const int palmte_battery_sample[] = {
-	2194, 2157, 2138, 2120,
-	2104, 2089, 2075, 2061,
-	2048, 2038, 2026, 2016,
-	2008, 1998, 1989, 1980,
-	1970, 1958, 1945, 1928,
-	1910, 1888, 1860, 1827,
-	1791, 1751, 1709, 1656,
-};
-
-#define INTERVAL		10
-#define BATTERY_HIGH_TRESHOLD	66
-#define BATTERY_LOW_TRESHOLD	33
-
-static void palmte_get_power_status(struct apm_power_info *info, int *battery)
-{
-	int charging, batt, hi, lo, mid;
-
-	charging = !gpio_get_value(PALMTE_DC_GPIO);
-	batt = battery[0];
-	if (charging)
-		batt -= 60;
-
-	hi = ARRAY_SIZE(palmte_battery_sample);
-	lo = 0;
-
-	info->battery_flag = 0;
-	info->units = APM_UNITS_MINS;
-
-	if (batt > palmte_battery_sample[lo]) {
-		info->battery_life = 100;
-		info->time = INTERVAL * ARRAY_SIZE(palmte_battery_sample);
-	} else if (batt <= palmte_battery_sample[hi - 1]) {
-		info->battery_life = 0;
-		info->time = 0;
-	} else {
-		while (hi > lo + 1) {
-			mid = (hi + lo) >> 1;
-			if (batt <= palmte_battery_sample[mid])
-				lo = mid;
-			else
-				hi = mid;
-		}
-
-		mid = palmte_battery_sample[lo] - palmte_battery_sample[hi];
-		hi = palmte_battery_sample[lo] - batt;
-		info->battery_life = 100 - (100 * lo + 100 * hi / mid) /
-			ARRAY_SIZE(palmte_battery_sample);
-		info->time = INTERVAL * (ARRAY_SIZE(palmte_battery_sample) -
-				lo) - INTERVAL * hi / mid;
-	}
-
-	if (charging) {
-		info->ac_line_status = APM_AC_ONLINE;
-		info->battery_status = APM_BATTERY_STATUS_CHARGING;
-		info->battery_flag |= APM_BATTERY_FLAG_CHARGING;
-	} else {
-		info->ac_line_status = APM_AC_OFFLINE;
-		if (info->battery_life > BATTERY_HIGH_TRESHOLD)
-			info->battery_status = APM_BATTERY_STATUS_HIGH;
-		else if (info->battery_life > BATTERY_LOW_TRESHOLD)
-			info->battery_status = APM_BATTERY_STATUS_LOW;
-		else
-			info->battery_status = APM_BATTERY_STATUS_CRITICAL;
-	}
-
-	if (info->battery_life > BATTERY_HIGH_TRESHOLD)
-		info->battery_flag |= APM_BATTERY_FLAG_HIGH;
-	else if (info->battery_life > BATTERY_LOW_TRESHOLD)
-		info->battery_flag |= APM_BATTERY_FLAG_LOW;
-	else
-		info->battery_flag |= APM_BATTERY_FLAG_CRITICAL;
-}
-#else
-#define palmte_get_power_status	NULL
-#endif
-
 static struct omap_board_config_kernel palmte_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&palmte_lcd_config },
 };
@@ -359,7 +275,7 @@ static void __init omap_palmte_init(void)
 	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
 	palmte_misc_gpio_setup();
 	omap_serial_init();
-	omap_usb_init(&palmte_usb_config);
+	omap1_usb_init(&palmte_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 

arch/arm/mach-omap1/board-palmtt.c

@@ -307,7 +307,7 @@ static void __init omap_palmtt_init(void)
 
 	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
 	omap_serial_init();
-	omap_usb_init(&palmtt_usb_config);
+	omap1_usb_init(&palmtt_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 

arch/arm/mach-omap1/board-palmz71.c

@@ -325,7 +325,7 @@ omap_palmz71_init(void)
 
 	spi_register_board_info(palmz71_boardinfo,
 				ARRAY_SIZE(palmz71_boardinfo));
-	omap_usb_init(&palmz71_usb_config);
+	omap1_usb_init(&palmz71_usb_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	palmz71_gpio_setup(0);

arch/arm/mach-omap1/board-perseus2.c

@@ -260,6 +260,18 @@ static void __init omap_perseus2_init(void)
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	omap_board_config = perseus2_config;

arch/arm/mach-omap1/board-sx1.c

@@ -392,7 +392,7 @@ static void __init omap_sx1_init(void)
 	omap_board_config_size = ARRAY_SIZE(sx1_config);
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
-	omap_usb_init(&sx1_usb_config);
+	omap1_usb_init(&sx1_usb_config);
 	sx1_mmc_init();
 
 	/* turn on USB power */

arch/arm/mach-omap1/board-voiceblue.c

@@ -198,7 +198,7 @@ static void __init voiceblue_init(void)
 	omap_board_config = voiceblue_config;
 	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
 	omap_serial_init();
-	omap_usb_init(&voiceblue_usb_config);
+	omap1_usb_init(&voiceblue_usb_config);
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
 	/* There is a good chance board is going up, so enable power LED

arch/arm/mach-omap1/clock.c

@@ -11,7 +11,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/errno.h>
@@ -34,9 +33,9 @@
 __u32 arm_idlect1_mask;
 struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
-/*-------------------------------------------------------------------------
+/*
  * Omap1 specific clock functions
- *-------------------------------------------------------------------------*/
+ */
 
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
@@ -523,7 +522,8 @@ const struct clkops clkops_dspck = {
 	.disable	= omap1_clk_disable_dsp_domain,
 };
 
-static int omap1_clk_enable_uart_functional(struct clk *clk)
+/* XXX SYSC register handling does not belong in the clock framework */
+static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
 {
 	int ret;
 	struct uart_clk *uclk;
@@ -539,7 +539,8 @@ static int omap1_clk_enable_uart_functional(struct clk *clk)
 	return ret;
 }
 
-static void omap1_clk_disable_uart_functional(struct clk *clk)
+/* XXX SYSC register handling does not belong in the clock framework */
+static void omap1_clk_disable_uart_functional_16xx(struct clk *clk)
 {
 	struct uart_clk *uclk;
 
@@ -550,9 +551,10 @@ static void omap1_clk_disable_uart_functional(struct clk *clk)
 	omap1_clk_disable_generic(clk);
 }
 
-const struct clkops clkops_uart = {
-	.enable		= omap1_clk_enable_uart_functional,
-	.disable	= omap1_clk_disable_uart_functional,
+/* XXX SYSC register handling does not belong in the clock framework */
+const struct clkops clkops_uart_16xx = {
+	.enable		= omap1_clk_enable_uart_functional_16xx,
+	.disable	= omap1_clk_disable_uart_functional_16xx,
 };
 
 long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
@@ -572,9 +574,9 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 	return ret;
 }
 
-/*-------------------------------------------------------------------------
+/*
  * Omap1 clock reset and init functions
- *-------------------------------------------------------------------------*/
+ */
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 

arch/arm/mach-omap1/clock.h

@@ -107,7 +107,7 @@ extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
 extern const struct clkops clkops_dspck;
 extern const struct clkops clkops_dummy;
-extern const struct clkops clkops_uart;
+extern const struct clkops clkops_uart_16xx;
 extern const struct clkops clkops_generic;
 
 #endif

arch/arm/mach-omap1/clock_data.c

@@ -8,6 +8,10 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * To do:
+ * - Clocks that are only available on some chips should be marked with the
+ *   chips that they are present on.
  */
 
 #include <linux/kernel.h>
@@ -23,9 +27,49 @@
 
 #include "clock.h"
 
-/*------------------------------------------------------------------------
+/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
+#define IDL_CLKOUT_ARM_SHIFT			12
+#define IDLTIM_ARM_SHIFT			9
+#define IDLAPI_ARM_SHIFT			8
+#define IDLIF_ARM_SHIFT				6
+#define IDLLB_ARM_SHIFT				4	/* undocumented? */
+#define OMAP1510_IDLLCD_ARM_SHIFT		3	/* undocumented? */
+#define IDLPER_ARM_SHIFT			2
+#define IDLXORP_ARM_SHIFT			1
+#define IDLWDT_ARM_SHIFT			0
+
+/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_UART3_CLK_MODE_R		31
+#define CONF_MOD_UART2_CLK_MODE_R		30
+#define CONF_MOD_UART1_CLK_MODE_R		29
+#define CONF_MOD_MMC_SD_CLK_REQ_R		23
+#define CONF_MOD_MCBSP3_AUXON			20
+
+/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_SOSSI_CLK_EN_R			16
+
+/* Some OTG_SYSCON_2-specific bit fields */
+#define OTG_SYSCON_2_UHOST_EN_SHIFT		8
+
+/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */
+#define SOFT_MMC2_DPLL_REQ_SHIFT	13
+#define SOFT_MMC_DPLL_REQ_SHIFT		12
+#define SOFT_UART3_DPLL_REQ_SHIFT	11
+#define SOFT_UART2_DPLL_REQ_SHIFT	10
+#define SOFT_UART1_DPLL_REQ_SHIFT	9
+#define SOFT_USB_OTG_DPLL_REQ_SHIFT	8
+#define SOFT_CAM_DPLL_REQ_SHIFT		7
+#define SOFT_COM_MCKO_REQ_SHIFT		6
+#define SOFT_PERIPH_REQ_SHIFT		5	/* sys_ck gate for UART2 ? */
+#define USB_REQ_EN_SHIFT		4
+#define SOFT_USB_REQ_SHIFT		3	/* sys_ck gate for USB host? */
+#define SOFT_SDW_REQ_SHIFT		2	/* sys_ck gate for Bluetooth? */
+#define SOFT_COM_REQ_SHIFT		1	/* sys_ck gate for com proc? */
+#define SOFT_DPLL_REQ_SHIFT		0
+
+/*
  * Omap1 clocks
- *-------------------------------------------------------------------------*/
+ */
 
 static struct clk ck_ref = {
 	.name		= "ck_ref",
@@ -54,7 +98,7 @@ static struct arm_idlect1_clk ck_dpll1out = {
 		.enable_bit	= EN_CKOUT_ARM,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 12,
+	.idlect_shift	= IDL_CLKOUT_ARM_SHIFT,
 };
 
 static struct clk sossi_ck = {
@@ -63,7 +107,7 @@ static struct clk sossi_ck = {
 	.parent		= &ck_dpll1out.clk,
 	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
-	.enable_bit	= 16,
+	.enable_bit	= CONF_MOD_SOSSI_CLK_EN_R,
 	.recalc		= &omap1_sossi_recalc,
 	.set_rate	= &omap1_set_sossi_rate,
 };
@@ -91,7 +135,7 @@ static struct arm_idlect1_clk armper_ck = {
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
-	.idlect_shift	= 2,
+	.idlect_shift	= IDLPER_ARM_SHIFT,
 };
 
 /*
@@ -118,7 +162,7 @@ static struct arm_idlect1_clk armxor_ck = {
 		.enable_bit	= EN_XORPCK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 1,
+	.idlect_shift	= IDLXORP_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armtim_ck = {
@@ -131,7 +175,7 @@ static struct arm_idlect1_clk armtim_ck = {
 		.enable_bit	= EN_TIMCK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 9,
+	.idlect_shift	= IDLTIM_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk armwdt_ck = {
@@ -145,7 +189,7 @@ static struct arm_idlect1_clk armwdt_ck = {
 		.fixed_div	= 14,
 		.recalc		= &omap_fixed_divisor_recalc,
 	},
-	.idlect_shift	= 0,
+	.idlect_shift	= IDLWDT_ARM_SHIFT,
 };
 
 static struct clk arminth_ck16xx = {
@@ -212,7 +256,6 @@ static struct clk dsptim_ck = {
 	.recalc		= &followparent_recalc,
 };
 
-/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
 static struct arm_idlect1_clk tc_ck = {
 	.clk = {
 		.name		= "tc_ck",
@@ -224,7 +267,7 @@ static struct arm_idlect1_clk tc_ck = {
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
-	.idlect_shift	= 6,
+	.idlect_shift	= IDLIF_ARM_SHIFT,
 };
 
 static struct clk arminth_ck1510 = {
@@ -304,7 +347,7 @@ static struct arm_idlect1_clk api_ck = {
 		.enable_bit	= EN_APICK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 8,
+	.idlect_shift	= IDLAPI_ARM_SHIFT,
 };
 
 static struct arm_idlect1_clk lb_ck = {
@@ -317,7 +360,7 @@ static struct arm_idlect1_clk lb_ck = {
 		.enable_bit	= EN_LBCK,
 		.recalc		= &followparent_recalc,
 	},
-	.idlect_shift	= 4,
+	.idlect_shift	= IDLLB_ARM_SHIFT,
 };
 
 static struct clk rhea1_ck = {
@@ -359,9 +402,15 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
 		.round_rate	= omap1_clk_round_rate_ckctl_arm,
 		.set_rate	= omap1_clk_set_rate_ckctl_arm,
 	},
-	.idlect_shift	= 3,
+	.idlect_shift	= OMAP1510_IDLLCD_ARM_SHIFT,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
 static struct clk uart1_1510 = {
 	.name		= "uart1_ck",
 	.ops		= &clkops_null,
@@ -370,25 +419,37 @@ static struct clk uart1_1510 = {
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
 static struct uart_clk uart1_16xx = {
 	.clk	= {
 		.name		= "uart1_ck",
-		.ops		= &clkops_uart,
+		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 29,
+		.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
 	},
 	.sysc_addr	= 0xfffb0054,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
 static struct clk uart2_ck = {
 	.name		= "uart2_ck",
 	.ops		= &clkops_null,
@@ -397,11 +458,17 @@ static struct clk uart2_ck = {
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.enable_bit	= CONF_MOD_UART2_CLK_MODE_R,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
 static struct clk uart3_1510 = {
 	.name		= "uart3_ck",
 	.ops		= &clkops_null,
@@ -410,21 +477,27 @@ static struct clk uart3_1510 = {
 	.rate		= 12000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
 	.set_rate	= &omap1_set_uart_rate,
 	.recalc		= &omap1_uart_recalc,
 };
 
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
 static struct uart_clk uart3_16xx = {
 	.clk	= {
 		.name		= "uart3_ck",
-		.ops		= &clkops_uart,
+		.ops		= &clkops_uart_16xx,
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
 		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 31,
+		.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
 	},
 	.sysc_addr	= 0xfffb9854,
 };
@@ -457,7 +530,7 @@ static struct clk usb_hhc_ck16xx = {
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
 	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
-	.enable_bit	= 8 /* UHOST_EN */,
+	.enable_bit	= OTG_SYSCON_2_UHOST_EN_SHIFT
 };
 
 static struct clk usb_dc_ck = {
@@ -466,7 +539,7 @@ static struct clk usb_dc_ck = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 4,
+	.enable_bit	= USB_REQ_EN_SHIFT,
 };
 
 static struct clk usb_dc_ck7xx = {
@@ -475,7 +548,25 @@ static struct clk usb_dc_ck7xx = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 8,
+	.enable_bit	= SOFT_USB_OTG_DPLL_REQ_SHIFT,
+};
+
+static struct clk uart1_7xx = {
+	.name		= "uart1_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 9,
+};
+
+static struct clk uart2_7xx = {
+	.name		= "uart2_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 11,
 };
 
 static struct clk mclk_1510 = {
@@ -484,7 +575,7 @@ static struct clk mclk_1510 = {
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 6,
+	.enable_bit	= SOFT_COM_MCKO_REQ_SHIFT,
 };
 
 static struct clk mclk_16xx = {
@@ -524,9 +615,13 @@ static struct clk mmc1_ck = {
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 23,
+	.enable_bit	= CONF_MOD_MMC_SD_CLK_REQ_R,
 };
 
+/*
+ * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
+ * CONF_MOD_MCBSP3_AUXON ??
+ */
 static struct clk mmc2_ck = {
 	.name		= "mmc2_ck",
 	.ops		= &clkops_generic,
@@ -546,7 +641,7 @@ static struct clk mmc3_ck = {
 	.rate		= 48000000,
 	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 12,
+	.enable_bit	= SOFT_MMC_DPLL_REQ_SHIFT,
 };
 
 static struct clk virtual_ck_mpu = {
@@ -620,7 +715,9 @@ static struct omap_clk omap_clks[] = {
 	/* ULPD clocks */
 	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
+	CLK(NULL,	"uart1_ck",	&uart1_7xx,	CK_7XX),
 	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart2_ck",	&uart2_7xx,	CK_7XX),
 	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
 	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),

arch/arm/mach-omap1/devices.c

@@ -63,44 +63,7 @@ static void omap_init_rtc(void)
 static inline void omap_init_rtc(void) {}
 #endif
 
-#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-#  define OMAP1_MBOX_SIZE	0x23
-#  define INT_DSP_MAILBOX1	INT_1510_DSP_MAILBOX1
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#  define OMAP1_MBOX_SIZE	0x2f
-#  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
-#endif
-
-#define OMAP1_MBOX_BASE		OMAP16XX_MAILBOX_BASE
-
-static struct resource mbox_resources[] = {
-	{
-		.start		= OMAP1_MBOX_BASE,
-		.end		= OMAP1_MBOX_BASE + OMAP1_MBOX_SIZE,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_DSP_MAILBOX1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mbox_device = {
-	.name		= "omap1-mailbox",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(mbox_resources),
-	.resource	= mbox_resources,
-};
-
-static inline void omap_init_mbox(void)
-{
-	platform_device_register(&mbox_device);
-}
-#else
 static inline void omap_init_mbox(void) { }
-#endif
 
 /*-------------------------------------------------------------------------*/
 
@@ -230,42 +193,7 @@ static inline void omap_init_spi100k(void)
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_OMAP_STI)
-
-#define OMAP1_STI_BASE		0xfffea000
-#define OMAP1_STI_CHANNEL_BASE	(OMAP1_STI_BASE + 0x400)
-
-static struct resource sti_resources[] = {
-	{
-		.start		= OMAP1_STI_BASE,
-		.end		= OMAP1_STI_BASE + SZ_1K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP1_STI_CHANNEL_BASE,
-		.end		= OMAP1_STI_CHANNEL_BASE + SZ_1K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_1610_STI,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device sti_device = {
-	.name		= "sti",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sti_resources),
-	.resource	= sti_resources,
-};
-
-static inline void omap_init_sti(void)
-{
-	platform_device_register(&sti_device);
-}
-#else
 static inline void omap_init_sti(void) {}
-#endif
 
 /*-------------------------------------------------------------------------*/
 

arch/arm/mach-omap1/include/mach/debug-macro.S

@@ -33,7 +33,7 @@ omap_uart_virt:	.word	0x0
 		/* Use omap_uart_phys/virt if already configured */
 9:		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =omap_uart_phys	@ physical base address
+		ldreq	\rx, =__virt_to_phys(omap_uart_phys)	@ physical base address
 		ldrne	\rx, =omap_uart_virt	@ virtual base
 		ldr	\rx, [\rx, #0]
 		cmp	\rx, #0			@ is port configured?
@@ -68,11 +68,15 @@ omap_uart_virt:	.word	0x0
 
 		/* Store both phys and virt address for the uart */
 98:		add	\rx, \rx, #0xff000000	@ phys base
-		ldr	\tmp, =omap_uart_phys
+		mrc	p15, 0, \tmp, c1, c0
+		tst	\tmp, #1		@ MMU enabled?
+		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
+		ldrne	\tmp, =omap_uart_phys
 		str	\rx, [\tmp, #0]
 		sub	\rx, \rx, #0xff000000	@ phys base
 		add	\rx, \rx, #0xfe000000	@ virt base
-		ldr	\tmp, =omap_uart_virt
+		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
+		ldrne	\tmp, =omap_uart_virt
 		str	\rx, [\tmp, #0]
 		b	9b
 99:

arch/arm/mach-omap1/mailbox.c

@@ -1,5 +1,5 @@
 /*
- * Mailbox reservation modules for DSP
+ * Mailbox reservation modules for OMAP1
  *
  * Copyright (C) 2006-2009 Nokia Corporation
  * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
@@ -9,13 +9,10 @@
  * for more details.
  */
 
-#include <linux/kernel.h>
-#include <linux/resource.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <plat/mailbox.h>
-#include <mach/irqs.h>
 
 #define MAILBOX_ARM2DSP1		0x00
 #define MAILBOX_ARM2DSP1b		0x04
@@ -83,7 +80,7 @@ static int omap1_mbox_fifo_full(struct omap_mbox *mbox)
 	struct omap_mbox1_fifo *fifo =
 		&((struct omap_mbox1_priv *)mbox->priv)->rx_fifo;
 
-	return (mbox_read_reg(fifo->flag));
+	return mbox_read_reg(fifo->flag);
 }
 
 /* irq */
@@ -141,47 +138,37 @@ struct omap_mbox mbox_dsp_info = {
 	.ops	= &omap1_mbox_ops,
 	.priv	= &omap1_mbox_dsp_priv,
 };
-EXPORT_SYMBOL(mbox_dsp_info);
+
+struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
 
 static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
-	struct resource *res;
+	struct resource *mem;
+	int ret;
+	int i;
+	struct omap_mbox **list;
 
-	if (pdev->num_resources != 2) {
-		dev_err(&pdev->dev, "invalid number of resources: %d\n",
-			pdev->num_resources);
-		return -ENODEV;
-	}
+	list = omap1_mboxes;
+	list[0]->irq = platform_get_irq_byname(pdev, "dsp");
 
-	/* MBOX base */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid mem resource\n");
-		return -ENODEV;
-	}
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mbox_base = ioremap(mem->start, resource_size(mem));
+	if (!mbox_base)
+		return -ENOMEM;
 
-	mbox_base = ioremap(res->start, resource_size(res));
-	if (!mbox_base) {
-		dev_err(&pdev->dev, "ioremap failed\n");
-		return -ENODEV;
-	}
-
-	/* DSP IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid irq resource\n");
+	ret = omap_mbox_register(&pdev->dev, list);
+	if (ret) {
 		iounmap(mbox_base);
-		return -ENODEV;
+		return ret;
 	}
-	mbox_dsp_info.irq = res->start;
 
-	return omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	return 0;
 }
 
 static int __devexit omap1_mbox_remove(struct platform_device *pdev)
 {
-	omap_mbox_unregister(&mbox_dsp_info);
-
+	omap_mbox_unregister();
+	iounmap(mbox_base);
 	return 0;
 }
 
@@ -189,7 +176,7 @@ static struct platform_driver omap1_mbox_driver = {
 	.probe	= omap1_mbox_probe,
 	.remove	= __devexit_p(omap1_mbox_remove),
 	.driver	= {
-		.name	= "omap1-mailbox",
+		.name	= "omap-mailbox",
 	},
 };
 

arch/arm/mach-omap1/mcbsp.c

@@ -23,7 +23,6 @@
 #include <plat/mux.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
-#include <plat/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
@@ -46,7 +45,6 @@ static void omap1_mcbsp_request(unsigned int id)
 				clk_enable(api_clk);
 				clk_enable(dsp_clk);
 
-				omap_dsp_request_mem();
 				/*
 				 * DSP external peripheral reset
 				 * FIXME: This should be moved to dsp code
@@ -62,7 +60,6 @@ static void omap1_mcbsp_free(unsigned int id)
 {
 	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
 		if (--dsp_use == 0) {
-			omap_dsp_release_mem();
 			if (!IS_ERR(api_clk)) {
 				clk_disable(api_clk);
 				clk_put(api_clk);

arch/arm/mach-omap1/mux.c

@@ -70,6 +70,10 @@ MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
 MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
 MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
 MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
+
+/* UART pins */
+MUX_CFG_7XX("UART_7XX_1",          3,   21,    0,   20,   0, 0)
+MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
 };
 #define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
 #else
@@ -440,7 +444,7 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 	}
 #endif
 
-#ifdef CONFIG_OMAP_MUX_ERRORS
+#ifdef CONFIG_OMAP_MUX_WARNINGS
 	return warn ? -ETXTBSY : 0;
 #else
 	return 0;

arch/arm/mach-omap1/serial.c

@@ -122,6 +122,13 @@ void __init omap_serial_init(void)
 
 	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
 
+		/* Don't look at UARTs higher than 2 for omap7xx */
+		if (cpu_is_omap7xx() && i > 1) {
+			serial_platform_data[i].membase = NULL;
+			serial_platform_data[i].mapbase = 0;
+			continue;
+		}
+
 		/* Static mapping, never released */
 		serial_platform_data[i].membase =
 			ioremap(serial_platform_data[i].mapbase, SZ_2K);

arch/arm/mach-omap1/usb.c

@@ -0,0 +1,530 @@
+/*
+ * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+
+#include <plat/mux.h>
+#include <plat/usb.h>
+
+/* These routines should handle the standard chip-specific modes
+ * for usb0/1/2 ports, covering basic mux and transceiver setup.
+ *
+ * Some board-*.c files will need to set up additional mux options,
+ * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
+ */
+
+/* TESTED ON:
+ *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
+ *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
+ *  - 1510 Innovator UDC with bundled usb0 cable
+ *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
+ *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
+ *  - 1710 custom development board using alternate pin group
+ *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ */
+
+#define INT_USB_IRQ_GEN		IH2_BASE + 20
+#define INT_USB_IRQ_NISO	IH2_BASE + 30
+#define INT_USB_IRQ_ISO		IH2_BASE + 29
+#define INT_USB_IRQ_HGEN	INT_USB_HHC_1
+#define INT_USB_IRQ_OTG		IH2_BASE + 8
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+
+static struct resource udc_resources[] = {
+	/* order is significant! */
+	{		/* registers */
+		.start		= UDC_BASE,
+		.end		= UDC_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {		/* general IRQ */
+		.start		= INT_USB_IRQ_GEN,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* PIO IRQ */
+		.start		= INT_USB_IRQ_NISO,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* SOF IRQ */
+		.start		= INT_USB_IRQ_ISO,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device udc_device = {
+	.name		= "omap_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(udc_resources),
+	.resource	= udc_resources,
+};
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+	/* IRQ numbers for omap7xx */
+	if(cpu_is_omap7xx()) {
+		udc_resources[1].start = INT_7XX_USB_GENI;
+		udc_resources[2].start = INT_7XX_USB_NON_ISO;
+		udc_resources[3].start = INT_7XX_USB_ISO;
+	}
+	pdata->udc_device = &udc_device;
+}
+
+#else
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP_OHCI_BASE,
+		.end	= OMAP_OHCI_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_IRQ_HGEN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci_device = {
+	.name			= "ohci",
+	.id			= -1,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource		= ohci_resources,
+};
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+	if (cpu_is_omap7xx())
+		ohci_resources[1].start = INT_7XX_USB_HHC_1;
+	pdata->ohci_device = &ohci_device;
+}
+
+#else
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
+
+static struct resource otg_resources[] = {
+	/* order is significant! */
+	{
+		.start		= OTG_BASE,
+		.end		= OTG_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= INT_USB_IRQ_OTG,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device otg_device = {
+	.name		= "omap_otg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+	.resource	= otg_resources,
+};
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+	if (cpu_is_omap7xx())
+		otg_resources[1].start = INT_7XX_USB_OTG;
+	pdata->otg_device = &otg_device;
+}
+
+#else
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+	u32	syscon1 = 0;
+
+	if (nwires == 0) {
+		if (!cpu_is_omap15xx()) {
+			u32 l;
+
+			/* pulldown D+/D- */
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		return 0;
+	}
+
+	if (is_device) {
+		if (cpu_is_omap7xx()) {
+			omap_cfg_reg(AA17_7XX_USB_DM);
+			omap_cfg_reg(W16_7XX_USB_PU_EN);
+			omap_cfg_reg(W17_7XX_USB_VBUSI);
+			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
+			omap_cfg_reg(W19_7XX_USB_DCRST);
+		} else
+			omap_cfg_reg(W4_USB_PUEN);
+	}
+
+	if (nwires == 2) {
+		u32 l;
+
+		// omap_cfg_reg(P9_USB_DP);
+		// omap_cfg_reg(R8_USB_DM);
+
+		if (cpu_is_omap15xx()) {
+			/* This works on 1510-Innovator */
+			return 0;
+		}
+
+		/* NOTES:
+		 *  - peripheral should configure VBUS detection!
+		 *  - only peripherals may use the internal D+/D- pulldowns
+		 *  - OTG support on this port not yet written
+		 */
+
+		/* Don't do this for omap7xx -- it causes USB to not work correctly */
+		if (!cpu_is_omap7xx()) {
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(7 << 4);
+			if (!is_device)
+				l |= (3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+
+		return 3 << 16;
+	}
+
+	/* alternate pin config, external transceiver */
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
+		return 0;
+	}
+
+	omap_cfg_reg(V6_USB0_TXD);
+	omap_cfg_reg(W9_USB0_TXEN);
+	omap_cfg_reg(W5_USB0_SE0);
+	if (nwires != 3)
+		omap_cfg_reg(Y5_USB0_RCV);
+
+	/* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
+	 * may be able to use I2C requests to set those bits along
+	 * with VBUS switching and overcurrent detection.
+	 */
+
+	if (nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+
+	switch (nwires) {
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		{
+			u32 l;
+
+			omap_cfg_reg(AA9_USB0_VP);
+			omap_cfg_reg(R9_USB0_VM);
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			0, nwires);
+	}
+
+	return syscon1 << 16;
+}
+
+u32 __init omap1_usb1_init(unsigned nwires)
+{
+	u32	syscon1 = 0;
+
+	if (!cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB1_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+	if (nwires == 0)
+		return 0;
+
+	/* external transceiver */
+	omap_cfg_reg(USB1_TXD);
+	omap_cfg_reg(USB1_TXEN);
+	if (nwires != 3)
+		omap_cfg_reg(USB1_RCV);
+
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB1_SEO);
+		omap_cfg_reg(USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
+		omap_cfg_reg(W13_1610_USB1_SE0);
+		omap_cfg_reg(R13_1610_USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1710()) {
+		omap_cfg_reg(R13_1710_USB1_SE0);
+		// SUSP
+	} else {
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
+	}
+
+	switch (nwires) {
+	case 2:
+		goto bad;
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		omap_cfg_reg(USB1_VP);
+		omap_cfg_reg(USB1_VM);
+		if (!cpu_is_omap15xx()) {
+			u32 l;
+
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB1_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+bad:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			1, nwires);
+	}
+
+	return syscon1 << 20;
+}
+
+u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	u32	syscon1 = 0;
+
+	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
+	if (alt_pingroup || nwires == 0)
+		return 0;
+
+	if (!cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+
+	/* external transceiver */
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB2_TXD);
+		omap_cfg_reg(USB2_TXEN);
+		omap_cfg_reg(USB2_SEO);
+		if (nwires != 3)
+			omap_cfg_reg(USB2_RCV);
+		/* there is no USB2_SPEED */
+	} else if (cpu_is_omap16xx()) {
+		omap_cfg_reg(V6_USB2_TXD);
+		omap_cfg_reg(W9_USB2_TXEN);
+		omap_cfg_reg(W5_USB2_SE0);
+		if (nwires != 3)
+			omap_cfg_reg(Y5_USB2_RCV);
+		// FIXME omap_cfg_reg(USB2_SPEED);
+	} else {
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
+	}
+
+	// omap_cfg_reg(USB2_SUSP);
+
+	switch (nwires) {
+	case 2:
+		goto bad;
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 5:
+		goto bad;
+	case 6:
+		syscon1 = 3;
+		if (cpu_is_omap15xx()) {
+			omap_cfg_reg(USB2_VP);
+			omap_cfg_reg(USB2_VM);
+		} else {
+			u32 l;
+
+			omap_cfg_reg(AA9_USB2_VP);
+			omap_cfg_reg(R9_USB2_VM);
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+bad:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			2, nwires);
+	}
+
+	return syscon1 << 24;
+}
+
+#ifdef	CONFIG_ARCH_OMAP15XX
+
+/* ULPD_DPLL_CTRL */
+#define DPLL_IOB		(1 << 13)
+#define DPLL_PLL_ENABLE		(1 << 4)
+#define DPLL_LOCK		(1 << 0)
+
+/* ULPD_APLL_CTRL */
+#define APLL_NDPLL_SWITCH	(1 << 0)
+
+static void __init omap_1510_usb_init(struct omap_usb_config *config)
+{
+	unsigned int val;
+	u16 w;
+
+	config->usb0_init(config->pins[0], is_usb0_device(config));
+	config->usb1_init(config->pins[1]);
+	config->usb2_init(config->pins[2], 0);
+
+	val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
+	val |= (config->hmc_mode << 1);
+	omap_writel(val, MOD_CONF_CTRL_0);
+
+	printk("USB: hmc %d", config->hmc_mode);
+	if (config->pins[0])
+		printk(", usb0 %d wires%s", config->pins[0],
+			is_usb0_device(config) ? " (dev)" : "");
+	if (config->pins[1])
+		printk(", usb1 %d wires", config->pins[1]);
+	if (config->pins[2])
+		printk(", usb2 %d wires", config->pins[2]);
+	printk("\n");
+
+	/* use DPLL for 48 MHz function clock */
+	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
+			omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
+
+	w = omap_readw(ULPD_APLL_CTRL);
+	w &= ~APLL_NDPLL_SWITCH;
+	omap_writew(w, ULPD_APLL_CTRL);
+
+	w = omap_readw(ULPD_DPLL_CTRL);
+	w |= DPLL_IOB | DPLL_PLL_ENABLE;
+	omap_writew(w, ULPD_DPLL_CTRL);
+
+	w = omap_readw(ULPD_SOFT_REQ);
+	w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
+	omap_writew(w, ULPD_SOFT_REQ);
+
+	while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
+		cpu_relax();
+
+#ifdef	CONFIG_USB_GADGET_OMAP
+	if (config->register_dev) {
+		int status;
+
+		udc_device.dev.platform_data = config;
+		status = platform_device_register(&udc_device);
+		if (status)
+			pr_debug("can't register UDC device, %d\n", status);
+		/* udc driver gates 48MHz by D+ pullup */
+	}
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	if (config->register_host) {
+		int status;
+
+		ohci_device.dev.platform_data = config;
+		status = platform_device_register(&ohci_device);
+		if (status)
+			pr_debug("can't register OHCI device, %d\n", status);
+		/* hcd explicitly gates 48MHz */
+	}
+#endif
+}
+
+#else
+static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
+#endif
+
+void __init omap1_usb_init(struct omap_usb_config *pdata)
+{
+	pdata->usb0_init = omap1_usb0_init;
+	pdata->usb1_init = omap1_usb1_init;
+	pdata->usb2_init = omap1_usb2_init;
+	udc_device_init(pdata);
+	ohci_device_init(pdata);
+	otg_device_init(pdata);
+
+	if (cpu_is_omap7xx() || cpu_is_omap16xx())
+		omap_otg_init(pdata);
+	else if (cpu_is_omap15xx())
+		omap_1510_usb_init(pdata);
+	else
+		printk(KERN_ERR "USB: No init for your chip yet\n");
+}

arch/arm/mach-omap2/Kconfig

@@ -1,22 +1,77 @@
+if ARCH_OMAP2PLUS
+
+menu "TI OMAP2/3/4 Specific Features"
+
+config ARCH_OMAP2PLUS_TYPICAL
+	bool "Typical OMAP configuration"
+	default y
+	select AEABI
+	select REGULATOR
+	select PM
+	select PM_RUNTIME
+	select VFP
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4
+	select SERIAL_8250
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_8250_CONSOLE
+	select I2C
+	select I2C_OMAP
+	select MFD
+	select MENELAUS if ARCH_OMAP2
+	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
+	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
+	help
+	  Compile a kernel suitable for booting most boards
+
+config ARCH_OMAP2
+	bool "TI OMAP2"
+	depends on ARCH_OMAP2PLUS
+	default y
+	select CPU_V6
+
+config ARCH_OMAP3
+	bool "TI OMAP3"
+	depends on ARCH_OMAP2PLUS
+	default y
+	select CPU_V7
+	select USB_ARCH_HAS_EHCI
+	select ARM_L1_CACHE_SHIFT_6
+
+config ARCH_OMAP4
+	bool "TI OMAP4"
+	default y
+	depends on ARCH_OMAP2PLUS
+	select CPU_V7
+	select ARM_GIC
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
 config ARCH_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
+	default y
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
+	default y
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP3430
 	bool "OMAP3430 support"
 	depends on ARCH_OMAP3
+	default y
 	select ARCH_OMAP_OTG
 
+config OMAP_PACKAGE_ZAF
+       bool
+
+config OMAP_PACKAGE_ZAC
+       bool
+
 config OMAP_PACKAGE_CBC
        bool
 
@@ -35,6 +90,7 @@ comment "OMAP Board Type"
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP2
+	default y
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -44,60 +100,75 @@ config MACH_OMAP2_TUSB6010
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
 	depends on ARCH_OMAP2
+	default y
+	select OMAP_PACKAGE_ZAF
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
 	depends on ARCH_OMAP2
+	default y
+	select OMAP_PACKAGE_ZAC
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
 	depends on ARCH_OMAP2
+	default y
+	select OMAP_PACKAGE_ZAC
 
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_DEVKIT8000
 	bool "DEVKIT8000 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_TOUCHBOOK
 	bool "OMAP3 Touch Book"
 	depends on ARCH_OMAP3
+	default y
 	select BACKLIGHT_CLASS_DEVICE
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_N800
@@ -112,6 +183,8 @@ config MACH_NOKIA_N810_WIMAX
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on ARCH_OMAP2420
+	default y
+	select OMAP_PACKAGE_ZAC
 	select MACH_NOKIA_N800
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
@@ -119,42 +192,55 @@ config MACH_NOKIA_N8X0
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM2
 	bool "OMAP3 Zoom2 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBP
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35 module"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_IGEP0020
 	bool "IGEP v2 board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBB
 
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CUS
 	select OMAP_MUX
 
 config MACH_OMAP_3630SDP
 	bool "OMAP3630 SDP board"
 	depends on ARCH_OMAP3
+	default y
 	select OMAP_PACKAGE_CBP
 
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
+	default y
+	depends on ARCH_OMAP4
+
+config MACH_OMAP4_PANDA
+	bool "OMAP4 Panda Board"
+	default y
 	depends on ARCH_OMAP4
 
 config OMAP3_EMU
@@ -176,3 +262,6 @@ config OMAP3_SDRC_AC_TIMING
 	  wish to say no.  Selecting yes without understanding what is
 	  going on could result in system crashes;
 
+endmenu
+
+endif

arch/arm/mach-omap2/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o
 
 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
@@ -15,13 +15,14 @@ clock-common				= clock.o clock_common_data.o \
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o
 
 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
@@ -36,6 +37,8 @@ AFLAGS_sram243x.o			:=-Wa,-march=armv6
 AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 
 # Pin multiplexing
+obj-$(CONFIG_ARCH_OMAP2420)		+= mux2420.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= mux2430.o
 obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
 
 # SMS/SDRC
@@ -47,6 +50,7 @@ ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
@@ -89,7 +93,10 @@ obj-$(CONFIG_OMAP3_EMU)			+= emu.o
 obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
 mailbox_mach-objs			:= mailbox.o
 
-obj-$(CONFIG_OMAP_IOMMU)		:= iommu2.o omap-iommu.o
+obj-$(CONFIG_OMAP_IOMMU)		+= iommu2.o
+
+iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
+obj-y					+= $(iommu-m) $(iommu-y)
 
 i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
 obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
@@ -105,6 +112,7 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
 obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
                                            hsmmc.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
+					   board-flash.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
 					   hsmmc.o
@@ -114,7 +122,7 @@ obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   hsmmc.o \
-					   board-sdp-flash.o
+					   board-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   board-rx51-sdram.o \
@@ -123,14 +131,17 @@ obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
 					   board-zoom-peripherals.o \
+					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
 					   board-zoom-peripherals.o \
+					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
 obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
 					   board-zoom-peripherals.o \
+					   board-flash.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
 					   hsmmc.o
@@ -140,12 +151,16 @@ obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
 					   hsmmc.o
+obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
+					   hsmmc.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
 					   hsmmc.o
 # Platform specific device init code
+usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
+obj-y					+= $(usbfs-m) $(usbfs-y)
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 obj-y					+= usb-ehci.o

arch/arm/mach-omap2/board-2430sdp.c

@@ -31,13 +31,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <plat/gpmc-smc91x.h>
 
+#include "mux.h"
 #include "hsmmc.h"
 
 #define SDP2430_CS0_BASE	0x04000000
@@ -122,11 +122,7 @@ static struct omap_smc91x_platform_data board_smc91x_data = {
 
 static void __init board_smc91x_init(void)
 {
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		board_smc91x_data.gpio_irq = 6;
-	else
-		board_smc91x_data.gpio_irq = 29;
-
+	omap_mux_init_gpio(149, OMAP_PIN_INPUT);
 	gpmc_smc91x_init(&board_smc91x_data);
 }
 
@@ -217,17 +213,30 @@ static struct omap_usb_config sdp2430_usb_config __initdata = {
 	.pins[0]	= 3,
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_2430sdp_init(void)
 {
 	int ret;
 
+	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	omap2_hsmmc_init(mmc);
-	omap_usb_init(&sdp2430_usb_config);
+	omap2_usbfs_init(&sdp2430_usb_config);
+
+	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
 	usb_musb_init(&musb_board_data);
+
 	board_smc91x_init();
 
 	/* Turn off secondary LCD backlight */

arch/arm/mach-omap2/board-3430sdp.c

@@ -41,7 +41,7 @@
 #include <plat/control.h>
 #include <plat/gpmc-smc91x.h>
 
-#include <mach/board-sdp.h>
+#include <mach/board-flash.h>
 
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
@@ -667,6 +667,18 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+/*
+ * SDP3430 V2 Board CS organization
+ * Different from SDP3430 V1. Now 4 switches used to specify CS
+ *
+ * See also the Switch S8 settings in the comments.
+ */
+static char chip_sel_3430[][GPMC_CS_NUM] = {
+	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
 static struct mtd_partition sdp_nor_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -797,24 +809,18 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
 	board_smc91x_init();
-	sdp_flash_init(sdp_flash_partitions);
+	board_flash_init(sdp_flash_partitions, chip_sel_3430);
 	sdp3430_display_init();
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
 }
 
-static void __init omap_3430sdp_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_3430sdp_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_3430sdp_init_irq,
 	.init_machine	= omap_3430sdp_init,

arch/arm/mach-omap2/board-3630sdp.c

@@ -18,10 +18,10 @@
 #include <plat/common.h>
 #include <plat/board.h>
 #include <plat/gpmc-smc91x.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>
+#include <mach/board-flash.h>
 
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
@@ -66,12 +66,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
-static void __init omap_sdp_map_io(void)
-{
-	omap2_set_globals_36xx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_config_kernel sdp_config[] __initdata = {
 };
 
@@ -93,12 +87,131 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
+/*
+ * SDP3630 CS organization
+ * See also the Switch S8 settings in the comments.
+ */
+static char chip_sel_sdp[][GPMC_CS_NUM] = {
+	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
+static struct mtd_partition sdp_nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+		.name		= "Bootloader-NOR",
+		.offset		= 0,
+		.size		= SZ_256K,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "Params-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_256K,
+		.mask_flags	= 0,
+	},
+	/* kernel */
+	{
+		.name		= "Kernel-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "Filesystem-NOR",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct mtd_partition sdp_onenand_partitions[] = {
+	{
+		.name		= "X-Loader-OneNAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	},
+	{
+		.name		= "U-Boot Environment-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * (64 * 2048),
+	},
+	{
+		.name		= "File System-OneNAND",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition sdp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1c0000 */
+		.size		= 6 * (64 * 2048),
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 40 * (64 * 2048),
+	},
+	{
+		.name		= "File System - NAND",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x780000 */
+	},
+};
+
+static struct flash_partitions sdp_flash_partitions[] = {
+	{
+		.parts = sdp_nor_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+	},
+	{
+		.parts = sdp_onenand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
+	},
+	{
+		.parts = sdp_nand_partitions,
+		.nr_parts = ARRAY_SIZE(sdp_nand_partitions),
+	},
+};
+
 static void __init omap_sdp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	omap_serial_init();
 	zoom_peripherals_init();
 	board_smc91x_init();
+	board_flash_init(sdp_flash_partitions, chip_sel_sdp);
 	enable_board_wakeup_source();
 	usb_ehci_init(&ehci_pdata);
 }
@@ -107,7 +220,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_sdp_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_sdp_init_irq,
 	.init_machine	= omap_sdp_init,

arch/arm/mach-omap2/board-4430sdp.c

@@ -21,6 +21,7 @@
 #include <linux/spi/spi.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
+#include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
@@ -40,6 +41,54 @@
 #define ETH_KS8851_POWER_ON		48
 #define ETH_KS8851_QUART		138
 
+static struct gpio_led sdp4430_gpio_leds[] = {
+	{
+		.name	= "omap4:green:debug0",
+		.gpio	= 61,
+	},
+	{
+		.name	= "omap4:green:debug1",
+		.gpio	= 30,
+	},
+	{
+		.name	= "omap4:green:debug2",
+		.gpio	= 7,
+	},
+	{
+		.name	= "omap4:green:debug3",
+		.gpio	= 8,
+	},
+	{
+		.name	= "omap4:green:debug4",
+		.gpio	= 50,
+	},
+	{
+		.name	= "omap4:blue:user",
+		.gpio	= 169,
+	},
+	{
+		.name	= "omap4:red:user",
+		.gpio	= 170,
+	},
+	{
+		.name	= "omap4:green:user",
+		.gpio	= 139,
+	},
+
+};
+
+static struct gpio_led_platform_data sdp4430_led_data = {
+	.leds	= sdp4430_gpio_leds,
+	.num_leds	= ARRAY_SIZE(sdp4430_gpio_leds),
+};
+
+static struct platform_device sdp4430_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &sdp4430_led_data,
+	},
+};
 static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
 	{
 		.modalias               = "ks8851",
@@ -112,6 +161,7 @@ static struct platform_device sdp4430_lcd_device = {
 
 static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_lcd_device,
+	&sdp4430_leds_gpio,
 };
 
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
@@ -156,14 +206,16 @@ static struct omap2_hsmmc_info mmc[] = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
+static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.0",
+		.dev_name = "mmci-omap-hs.1",
 	},
+};
+static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
 	{
 		.supply = "vmmc",
-		.dev_name = "mmci-omap-hs.1",
+		.dev_name = "mmci-omap-hs.0",
 	},
 };
 
@@ -210,6 +262,8 @@ static struct regulator_init_data sdp4430_vaux1 = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = sdp4430_vaux_supply,
 };
 
 static struct regulator_init_data sdp4430_vaux2 = {
@@ -250,7 +304,7 @@ static struct regulator_init_data sdp4430_vmmc = {
 					| REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = 2,
+	.num_consumer_supplies  = 1,
 	.consumer_supplies      = sdp4430_vmmc_supply,
 };
 
@@ -353,6 +407,11 @@ static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
 		.platform_data = &sdp4430_twldata,
 	},
 };
+static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tmp105", 0x48),
+	},
+};
 static int __init omap4_i2c_init(void)
 {
 	/*
@@ -362,7 +421,8 @@ static int __init omap4_i2c_init(void)
 	omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
 			ARRAY_SIZE(sdp4430_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
+				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
 	omap_register_i2c_bus(4, 400, NULL, 0);
 	return 0;
 }

arch/arm/mach-omap2/board-am3517evm.c

@@ -461,17 +461,11 @@ static void __init am3517_evm_init(void)
 	am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
 }
 
-static void __init am3517_evm_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= am3517_evm_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= am3517_evm_init_irq,
 	.init_machine	= am3517_evm_init,

arch/arm/mach-omap2/board-apollon.c

@@ -35,13 +35,14 @@
 
 #include <mach/gpio.h>
 #include <plat/led.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/control.h>
 
+#include "mux.h"
+
 /* LED & Switch macros */
 #define LED0_GPIO13		13
 #define LED1_GPIO14		14
@@ -244,7 +245,7 @@ static inline void __init apollon_init_smc91x(void)
 	apollon_smc91x_resources[0].end   = base + 0x30f;
 	udelay(100);
 
-	omap_cfg_reg(W4__24XX_GPIO74);
+	omap_mux_init_gpio(74, 0);
 	if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			APOLLON_ETHR_GPIO_IRQ);
@@ -286,15 +287,15 @@ static void __init omap_apollon_init_irq(void)
 static void __init apollon_led_init(void)
 {
 	/* LED0 - AA10 */
-	omap_cfg_reg(AA10_242X_GPIO13);
+	omap_mux_init_signal("vlynq_clk.gpio_13", 0);
 	gpio_request(LED0_GPIO13, "LED0");
 	gpio_direction_output(LED0_GPIO13, 0);
 	/* LED1  - AA6 */
-	omap_cfg_reg(AA6_242X_GPIO14);
+	omap_mux_init_signal("vlynq_rx1.gpio_14", 0);
 	gpio_request(LED1_GPIO14, "LED1");
 	gpio_direction_output(LED1_GPIO14, 0);
 	/* LED2  - AA4 */
-	omap_cfg_reg(AA4_242X_GPIO15);
+	omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
 	gpio_request(LED2_GPIO15, "LED2");
 	gpio_direction_output(LED2_GPIO15, 0);
 }
@@ -303,22 +304,35 @@ static void __init apollon_usb_init(void)
 {
 	/* USB device */
 	/* DEVICE_SUSPEND */
-	omap_cfg_reg(P21_242X_GPIO12);
+	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
 	gpio_request(12, "USB suspend");
 	gpio_direction_output(12, 0);
-	omap_usb_init(&apollon_usb_config);
+	omap2_usbfs_init(&apollon_usb_config);
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_apollon_init(void)
 {
 	u32 v;
 
+	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
+
 	apollon_led_init();
 	apollon_flash_init();
 	apollon_usb_init();
 
 	/* REVISIT: where's the correct place */
-	omap_cfg_reg(W19_24XX_SYS_NIRQ);
+	omap_mux_init_signal("sys_nirq", OMAP_PULL_ENA | OMAP_PULL_UP);
+
+	/* LCD PWR_EN */
+	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
 
 	/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
 	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);

arch/arm/mach-omap2/board-cm-t35.c

@@ -61,8 +61,6 @@
 #define SB_T35_SMSC911X_GPIO	65
 
 #define NAND_BLOCK_SIZE		SZ_128K
-#define GPMC_CS0_BASE		0x60
-#define GPMC_CS0_BASE_ADDR	(OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE)
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <linux/smsc911x.h>
@@ -223,28 +221,12 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
 	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
 	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
 	.cs			= 0,
-	.gpmc_cs_baseaddr	= (void __iomem *)GPMC_CS0_BASE_ADDR,
-	.gpmc_baseaddr		= (void __iomem *)OMAP34XX_GPMC_VIRT,
 
 };
 
-static struct resource cm_t35_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device cm_t35_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.num_resources	= 1,
-	.resource	= &cm_t35_nand_resource,
-	.dev		= {
-		.platform_data	= &cm_t35_nand_data,
-	},
-};
-
 static void __init cm_t35_init_nand(void)
 {
-	if (platform_device_register(&cm_t35_nand_device) < 0)
+	if (gpmc_nand_init(&cm_t35_nand_data) < 0)
 		pr_err("CM-T35: Unable to register NAND device\n");
 }
 #else
@@ -708,12 +690,6 @@ static void __init cm_t35_init_irq(void)
 	omap_gpio_init();
 }
 
-static void __init cm_t35_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_mux board_mux[] __initdata = {
 	/* nCS and IRQ for CM-T35 ethernet */
 	OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
@@ -836,7 +812,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= cm_t35_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= cm_t35_init_irq,
 	.init_machine	= cm_t35_init,

arch/arm/mach-omap2/board-devkit8000.c

@@ -33,6 +33,7 @@
 #include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
+#include <mach/id.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -58,9 +59,6 @@
 #include "mux.h"
 #include "hsmmc.h"
 
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
-
 #define NAND_BLOCK_SIZE		SZ_128K
 
 #define OMAP_DM9000_GPIO_IRQ	25
@@ -104,20 +102,6 @@ static struct omap_nand_platform_data devkit8000_nand_data = {
 	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
 };
 
-static struct resource devkit8000_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device devkit8000_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &devkit8000_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &devkit8000_nand_resource,
-};
-
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -126,54 +110,50 @@ static struct omap2_hsmmc_info mmc[] = {
 	},
 	{}	/* Terminator */
 };
-static struct omap_board_config_kernel devkit8000_config[] __initdata = {
-};
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
 	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
 	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
 
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
 }
+
 static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 {
+	if (gpio_is_valid(dssdev->reset_gpio))
+		gpio_set_value(dssdev->reset_gpio, 0);
 }
 
-static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev)
-{
+static struct regulator_consumer_supply devkit8000_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
 
-	return 0;
-}
-
-static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
-
-static struct regulator_consumer_supply devkit8000_vmmc1_supply = {
-	.supply			= "vmmc",
-};
-
-static struct regulator_consumer_supply devkit8000_vsim_supply = {
-	.supply			= "vmmc_aux",
-};
 
+/* ads7846 on SPI */
+static struct regulator_consumer_supply devkit8000_vio_supply =
+	REGULATOR_SUPPLY("vcc", "spi2.0");
 
 static struct omap_dss_device devkit8000_lcd_device = {
 	.name                   = "lcd",
-	.driver_name            = "innolux_at_panel",
+	.driver_name            = "generic_panel",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines     = 24,
+	.reset_gpio             = -EINVAL, /* will be replaced */
 	.platform_enable        = devkit8000_panel_enable_lcd,
 	.platform_disable       = devkit8000_panel_disable_lcd,
 };
@@ -182,6 +162,7 @@ static struct omap_dss_device devkit8000_dvi_device = {
 	.driver_name            = "generic_panel",
 	.type                   = OMAP_DISPLAY_TYPE_DPI,
 	.phy.dpi.data_lines     = 24,
+	.reset_gpio             = -EINVAL, /* will be replaced */
 	.platform_enable        = devkit8000_panel_enable_dvi,
 	.platform_disable       = devkit8000_panel_disable_dvi,
 };
@@ -191,8 +172,6 @@ static struct omap_dss_device devkit8000_tv_device = {
 	.driver_name            = "venc",
 	.type                   = OMAP_DISPLAY_TYPE_VENC,
 	.phy.venc.type          = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.platform_enable        = devkit8000_panel_enable_tv,
-	.platform_disable       = devkit8000_panel_disable_tv,
 };
 
 
@@ -216,10 +195,8 @@ static struct platform_device devkit8000_dss_device = {
 	},
 };
 
-static struct regulator_consumer_supply devkit8000_vdda_dac_supply = {
-	.supply = "vdda_dac",
-	.dev	= &devkit8000_dss_device.dev,
-};
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
+	REGULATOR_SUPPLY("vdda_dac", "omapdss");
 
 static int board_keymap[] = {
 	KEY(0, 0, KEY_1),
@@ -266,7 +243,21 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 
 	/* link regulators to MMC adapters */
 	devkit8000_vmmc1_supply.dev = mmc[0].dev;
-	devkit8000_vsim_supply.dev = mmc[0].dev;
+
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+        /* gpio + 1 is "LCD_PWREN" (out, active high) */
+	devkit8000_lcd_device.reset_gpio = gpio + 1;
+	gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
+	/* Disable until needed */
+	gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+
+	/* gpio + 7 is "DVI_PD" (out, active low) */
+	devkit8000_dvi_device.reset_gpio = gpio + 7;
+	gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
+	/* Disable until needed */
+	gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
 
 	return 0;
 }
@@ -282,16 +273,8 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.setup		= devkit8000_twl_gpio_setup,
 };
 
-static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
-	{
-	.supply		= "vdvi",
-	.dev		= &devkit8000_lcd_device.dev,
-	},
-	{
-	.supply		= "vdds_dsi",
-	.dev		= &devkit8000_dss_device.dev,
-	}
-};
+static struct regulator_consumer_supply devkit8000_vpll1_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
 
 /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
 static struct regulator_init_data devkit8000_vmmc1 = {
@@ -308,21 +291,6 @@ static struct regulator_init_data devkit8000_vmmc1 = {
 	.consumer_supplies	= &devkit8000_vmmc1_supply,
 };
 
-/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
-static struct regulator_init_data devkit8000_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &devkit8000_vsim_supply,
-};
-
 /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
 static struct regulator_init_data devkit8000_vdac = {
 	.constraints = {
@@ -337,10 +305,9 @@ static struct regulator_init_data devkit8000_vdac = {
 	.consumer_supplies	= &devkit8000_vdda_dac_supply,
 };
 
-/* VPLL2 for digital video outputs */
-static struct regulator_init_data devkit8000_vpll2 = {
+/* VPLL1 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll1 = {
 	.constraints = {
-		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
@@ -348,8 +315,23 @@ static struct regulator_init_data devkit8000_vpll2 = {
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= ARRAY_SIZE(devkit8000_vpll2_supplies),
-	.consumer_supplies	= devkit8000_vpll2_supplies,
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &devkit8000_vpll1_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data devkit8000_vio = {
+	.constraints = {
+		.min_uV                 = 1800000,
+		.max_uV                 = 1800000,
+		.apply_uV               = true,
+		.valid_modes_mask       = REGULATOR_MODE_NORMAL
+			| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask         = REGULATOR_CHANGE_MODE
+			| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &devkit8000_vio_supply,
 };
 
 static struct twl4030_usb_data devkit8000_usb_data = {
@@ -374,15 +356,15 @@ static struct twl4030_platform_data devkit8000_twldata = {
 	.gpio		= &devkit8000_gpio_data,
 	.codec		= &devkit8000_codec_data,
 	.vmmc1		= &devkit8000_vmmc1,
-	.vsim		= &devkit8000_vsim,
 	.vdac		= &devkit8000_vdac,
-	.vpll2		= &devkit8000_vpll2,
+	.vpll1		= &devkit8000_vpll1,
+	.vio		= &devkit8000_vio,
 	.keypad		= &devkit8000_kp_data,
 };
 
 static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
 	{
-		I2C_BOARD_INFO("twl4030", 0x48),
+		I2C_BOARD_INFO("tps65930", 0x48),
 		.flags = I2C_CLIENT_WAKE,
 		.irq = INT_34XX_SYS_NIRQ,
 		.platform_data = &devkit8000_twldata,
@@ -464,8 +446,6 @@ static struct platform_device keys_gpio = {
 
 static void __init devkit8000_init_irq(void)
 {
-	omap_board_config = devkit8000_config;
-	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
@@ -560,6 +540,9 @@ static struct platform_device omap_dm9000_dev = {
 
 static void __init omap_dm9000_init(void)
 {
+	unsigned char *eth_addr = omap_dm9000_platdata.dev_addr;
+	struct omap_die_id odi;
+
 	if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
 			OMAP_DM9000_GPIO_IRQ);
@@ -567,6 +550,16 @@ static void __init omap_dm9000_init(void)
 		}
 
 	gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+
+	/* init the mac address using DIE id */
+	omap_get_die_id(&odi);
+
+	eth_addr[0] = 0x02; /* locally administered */
+	eth_addr[1] = odi.id_1 & 0xff;
+	eth_addr[2] = (odi.id_0 & 0xff000000) >> 24;
+	eth_addr[3] = (odi.id_0 & 0x00ff0000) >> 16;
+	eth_addr[4] = (odi.id_0 & 0x0000ff00) >> 8;
+	eth_addr[5] = (odi.id_0 & 0x000000ff);
 }
 
 static struct platform_device *devkit8000_devices[] __initdata = {
@@ -581,8 +574,6 @@ static void __init devkit8000_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -604,13 +595,9 @@ static void __init devkit8000_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		devkit8000_nand_data.cs = nandcs;
-		devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		devkit8000_nand_data.gpmc_baseaddr = (void *)
-			(gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&devkit8000_nand_device) < 0)
+		if (gpmc_nand_init(&devkit8000_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -797,8 +784,6 @@ static void __init devkit8000_init(void)
 	devkit8000_i2c_init();
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));
-	omap_board_config = devkit8000_config;
-	omap_board_config_size = ARRAY_SIZE(devkit8000_config);
 
 	spi_register_board_info(devkit8000_spi_board_info,
 	ARRAY_SIZE(devkit8000_spi_board_info));
@@ -814,17 +799,11 @@ static void __init devkit8000_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init devkit8000_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= devkit8000_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,

arch/arm/mach-omap2/board-sdp-flash.c → arch/arm/mach-omap2/board-flash.c

@@ -21,7 +21,7 @@
 #include <plat/nand.h>
 #include <plat/onenand.h>
 #include <plat/tc.h>
-#include <mach/board-sdp.h>
+#include <mach/board-flash.h>
 
 #define REG_FPGA_REV			0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2	0x60
@@ -29,72 +29,53 @@
 
 #define DEBUG_BASE		0x08000000 /* debug board */
 
-#define PDC_NOR		1
-#define PDC_NAND	2
-#define PDC_ONENAND	3
-#define DBG_MPDB	4
-
 /* various memory sizes */
 #define FLASH_SIZE_SDPV1	SZ_64M	/* NOR flash (64 Meg aligned) */
 #define FLASH_SIZE_SDPV2	SZ_128M	/* NOR flash (256 Meg aligned) */
 
-/*
- * SDP3430 V2 Board CS organization
- * Different from SDP3430 V1. Now 4 switches used to specify CS
- *
- * See also the Switch S8 settings in the comments.
- *
- * REVISIT: Add support for 2430 SDP
- */
-static const unsigned char chip_sel_sdp[][GPMC_CS_NUM] = {
-	{PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
-	{PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
-	{PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct physmap_flash_data sdp_nor_data = {
+static struct physmap_flash_data board_nor_data = {
 	.width		= 2,
 };
 
-static struct resource sdp_nor_resource = {
+static struct resource board_nor_resource = {
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device sdp_nor_device = {
+static struct platform_device board_nor_device = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-			.platform_data = &sdp_nor_data,
+			.platform_data = &board_nor_data,
 	},
 	.num_resources	= 1,
-	.resource	= &sdp_nor_resource,
+	.resource	= &board_nor_resource,
 };
 
 static void
-__init board_nor_init(struct flash_partitions sdp_nor_parts, u8 cs)
+__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 {
 	int err;
 
-	sdp_nor_data.parts	= sdp_nor_parts.parts;
-	sdp_nor_data.nr_parts	= sdp_nor_parts.nr_parts;
+	board_nor_data.parts	= nor_parts;
+	board_nor_data.nr_parts	= nr_parts;
 
 	/* Configure start address and size of NOR device */
 	if (omap_rev() >= OMAP3430_REV_ES1_0) {
 		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
-				(unsigned long *)&sdp_nor_resource.start);
-		sdp_nor_resource.end = sdp_nor_resource.start
+				(unsigned long *)&board_nor_resource.start);
+		board_nor_resource.end = board_nor_resource.start
 					+ FLASH_SIZE_SDPV2 - 1;
 	} else {
 		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
-				(unsigned long *)&sdp_nor_resource.start);
-		sdp_nor_resource.end = sdp_nor_resource.start
+				(unsigned long *)&board_nor_resource.start);
+		board_nor_resource.end = board_nor_resource.start
 					+ FLASH_SIZE_SDPV1 - 1;
 	}
 	if (err < 0) {
 		printk(KERN_ERR "NOR: Can't request GPMC CS\n");
 		return;
 	}
-	if (platform_device_register(&sdp_nor_device) < 0)
+	if (platform_device_register(&board_nor_device) < 0)
 		printk(KERN_ERR	"Unable to register NOR device\n");
 }
 
@@ -105,17 +86,18 @@ static struct omap_onenand_platform_data board_onenand_data = {
 };
 
 static void
-__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+__init board_onenand_init(struct mtd_partition *onenand_parts,
+				u8 nr_parts, u8 cs)
 {
 	board_onenand_data.cs		= cs;
-	board_onenand_data.parts	= sdp_onenand_parts.parts;
-	board_onenand_data.nr_parts	= sdp_onenand_parts.nr_parts;
+	board_onenand_data.parts	= onenand_parts;
+	board_onenand_data.nr_parts	= nr_parts;
 
 	gpmc_onenand_init(&board_onenand_data);
 }
 #else
 static void
-__init board_onenand_init(struct flash_partitions sdp_onenand_parts, u8 cs)
+__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 {
 }
 #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
@@ -147,7 +129,7 @@ static struct gpmc_timings nand_timings = {
 	.wr_data_mux_bus = 0,
 };
 
-static struct omap_nand_platform_data sdp_nand_data = {
+static struct omap_nand_platform_data board_nand_data = {
 	.nand_setup	= NULL,
 	.gpmc_t		= &nand_timings,
 	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
@@ -155,23 +137,18 @@ static struct omap_nand_platform_data sdp_nand_data = {
 	.devsize	= 0,	/* '0' for 8-bit, '1' for 16-bit device */
 };
 
-static void
-__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+void
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
 {
-	sdp_nand_data.cs		= cs;
-	sdp_nand_data.parts		= sdp_nand_parts.parts;
-	sdp_nand_data.nr_parts		= sdp_nand_parts.nr_parts;
+	board_nand_data.cs		= cs;
+	board_nand_data.parts		= nand_parts;
+	board_nand_data.nr_parts		= nr_parts;
 
-	sdp_nand_data.gpmc_cs_baseaddr	= (void *)(OMAP34XX_GPMC_VIRT +
-							GPMC_CS0_BASE +
-							cs * GPMC_CS_SIZE);
-	sdp_nand_data.gpmc_baseaddr	 = (void *) (OMAP34XX_GPMC_VIRT);
-
-	gpmc_nand_init(&sdp_nand_data);
+	gpmc_nand_init(&board_nand_data);
 }
 #else
-static void
-__init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs)
+void
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs)
 {
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
@@ -215,7 +192,8 @@ unmap:
  *
  * @return - void.
  */
-void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
+void board_flash_init(struct flash_partitions partition_info[],
+					char chip_sel_board[][GPMC_CS_NUM])
 {
 	u8		cs = 0;
 	u8		norcs = GPMC_CS_NUM + 1;
@@ -232,7 +210,7 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
 		printk(KERN_ERR "%s: Invalid chip select: %d\n", __func__, cs);
 		return;
 	}
-	config_sel = (unsigned char *)(chip_sel_sdp[idx]);
+	config_sel = (unsigned char *)(chip_sel_board[idx]);
 
 	while (cs < GPMC_CS_NUM) {
 		switch (config_sel[cs]) {
@@ -256,17 +234,20 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
 		printk(KERN_INFO "NOR: Unable to find configuration "
 				"in GPMC\n");
 	else
-		board_nor_init(sdp_partition_info[0], norcs);
+		board_nor_init(partition_info[0].parts,
+				partition_info[0].nr_parts, norcs);
 
 	if (onenandcs > GPMC_CS_NUM)
 		printk(KERN_INFO "OneNAND: Unable to find configuration "
 				"in GPMC\n");
 	else
-		board_onenand_init(sdp_partition_info[1], onenandcs);
+		board_onenand_init(partition_info[1].parts,
+					partition_info[1].nr_parts, onenandcs);
 
 	if (nandcs > GPMC_CS_NUM)
 		printk(KERN_INFO "NAND: Unable to find configuration "
 				"in GPMC\n");
 	else
-		board_nand_init(sdp_partition_info[2], nandcs);
+		board_nand_init(partition_info[2].parts,
+				partition_info[2].nr_parts, nandcs);
 }

arch/arm/mach-omap2/board-generic.c

@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>

arch/arm/mach-omap2/board-h4.c

@@ -33,7 +33,6 @@
 
 #include <plat/control.h>
 #include <mach/gpio.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
@@ -42,6 +41,8 @@
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 
+#include "mux.h"
+
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
 
@@ -246,7 +247,7 @@ static inline void __init h4_init_debug(void)
 
 	udelay(100);
 
-	omap_cfg_reg(M15_24XX_GPIO92);
+	omap_mux_init_gpio(92, 0);
 	if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
 
@@ -272,27 +273,6 @@ static struct omap_lcd_config h4_lcd_config __initdata = {
 };
 
 static struct omap_usb_config h4_usb_config __initdata = {
-#ifdef	CONFIG_MACH_OMAP2_H4_USB1
-	/* NOTE:  usb1 could also be used with 3 wire signaling */
-	.pins[1]	= 4,
-#endif
-
-#ifdef	CONFIG_MACH_OMAP_H4_OTG
-	/* S1.10 ON -- USB OTG port
-	 * usb0 switched to Mini-AB port and isp1301 transceiver;
-	 * S2.POS3 = OFF, S2.POS4 = ON ... to allow battery charging
-	 */
-	.otg		= 1,
-	.pins[0]	= 4,
-#ifdef	CONFIG_USB_GADGET_OMAP
-	/* use OTG cable, or standard A-to-MiniB */
-	.hmc_mode	= 0x14,	/* 0:dev/otg 1:host 2:disable */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-	/* use OTG cable, or NONSTANDARD (B-to-MiniB) */
-	.hmc_mode	= 0x11,	/* 0:host 1:host 2:disable */
-#endif	/* XX */
-
-#else
 	/* S1.10 OFF -- usb "download port"
 	 * usb0 switched to Mini-B port and isp1105 transceiver;
 	 * S2.POS3 = ON, S2.POS4 = OFF ... to enable battery charging
@@ -301,7 +281,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
 	.pins[0]	= 3,
 /*	.hmc_mode	= 0x14,*/	/* 0:dev 1:host 2:disable */
 	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
-#endif
 };
 
 static struct omap_board_config_kernel h4_config[] = {
@@ -338,31 +317,54 @@ static struct i2c_board_info __initdata h4_i2c_board_info[] = {
 	},
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_h4_init(void)
 {
+	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
+
 	/*
 	 * Make sure the serial ports are muxed on at this point.
 	 * You have to mux them off in device drivers later on
 	 * if not needed.
 	 */
-#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
-	omap_cfg_reg(K15_24XX_UART3_TX);
-	omap_cfg_reg(K14_24XX_UART3_RX);
-#endif
 
 #if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
+	omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
+	omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
 	if (omap_has_menelaus()) {
+		omap_mux_init_signal("sdrc_a14.gpio0",
+			OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
+		omap_mux_init_signal("gpio_98", 0);
 		row_gpios[5] = 0;
 		col_gpios[2] = 15;
 		col_gpios[6] = 18;
+	} else {
+		omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
+		omap_mux_init_signal("gpio_100", 0);
+		omap_mux_init_signal("gpio_98", 0);
 	}
+	omap_mux_init_signal("gpio_90", 0);
+	omap_mux_init_signal("gpio_91", 0);
+	omap_mux_init_signal("gpio_36", 0);
+	omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
+	omap_mux_init_signal("gpio_97", 0);
 #endif
 
 	i2c_register_board_info(1, h4_i2c_board_info,
 			ARRAY_SIZE(h4_i2c_board_info));
 
 	platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
-	omap_usb_init(&h4_usb_config);
+	omap2_usbfs_init(&h4_usb_config);
 	omap_serial_init();
 }
 

arch/arm/mach-omap2/board-igep0020.c

@@ -532,17 +532,11 @@ static void __init igep2_init(void)
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
 }
 
-static void __init igep2_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(IGEP0020, "IGEP v2 board")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= igep2_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= igep2_init_irq,
 	.init_machine	= igep2_init,

arch/arm/mach-omap2/board-ldp.c

@@ -38,6 +38,7 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
+#include <mach/board-zoom.h>
 
 #include <asm/delay.h>
 #include <plat/control.h>
@@ -388,6 +389,38 @@ static struct omap_musb_board_data musb_board_data = {
 	.power			= 100,
 };
 
+static struct mtd_partition ldp_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "File System - NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= MTDPART_SIZ_FULL,	/* 96MB, 0x6000000 */
+	},
+
+};
+
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -400,23 +433,19 @@ static void __init omap_ldp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init(&musb_board_data);
+	board_nand_init(ldp_nand_partitions,
+		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS);
 
 	omap2_hsmmc_init(mmc);
 	/* link regulators to MMC adapters */
 	ldp_vmmc1_supply.dev = mmc[0].dev;
 }
 
-static void __init omap_ldp_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_ldp_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_ldp_init_irq,
 	.init_machine	= omap_ldp_init,

arch/arm/mach-omap2/board-n8x0.c

@@ -33,6 +33,8 @@
 #include <plat/mmc.h>
 #include <plat/serial.h>
 
+#include "mux.h"
+
 static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
@@ -649,8 +651,17 @@ static void __init n8x0_init_irq(void)
 	omap_gpio_init();
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init n8x0_init_machine(void)
 {
+	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
 	/* FIXME: add n810 spi devices */
 	spi_register_board_info(n800_spi_board_info,
 				ARRAY_SIZE(n800_spi_board_info));

arch/arm/mach-omap2/board-omap3beagle.c

@@ -48,9 +48,6 @@
 #include "mux.h"
 #include "hsmmc.h"
 
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
-
 #define NAND_BLOCK_SIZE		SZ_128K
 
 static struct mtd_partition omap3beagle_nand_partitions[] = {
@@ -93,20 +90,6 @@ static struct omap_nand_platform_data omap3beagle_nand_data = {
 	.dev_ready	= NULL,
 };
 
-static struct resource omap3beagle_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device omap3beagle_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &omap3beagle_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &omap3beagle_nand_resource,
-};
-
 /* DSS */
 
 static int beagle_enable_dvi(struct omap_dss_device *dssdev)
@@ -424,8 +407,6 @@ static void __init omap3beagle_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -447,12 +428,9 @@ static void __init omap3beagle_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		omap3beagle_nand_data.cs = nandcs;
-		omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&omap3beagle_nand_device) < 0)
+		if (gpmc_nand_init(&omap3beagle_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -507,18 +485,12 @@ static void __init omap3_beagle_init(void)
 	beagle_display_init();
 }
 
-static void __init omap3_beagle_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_beagle_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,

arch/arm/mach-omap2/board-omap3evm.c

@@ -715,18 +715,12 @@ static void __init omap3_evm_init(void)
 	omap3_evm_display_init();
 }
 
-static void __init omap3_evm_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_evm_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3_evm_init_irq,
 	.init_machine	= omap3_evm_init,

arch/arm/mach-omap2/board-omap3pandora.c

@@ -25,6 +25,9 @@
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
+#include <linux/spi/wl12xx.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 #include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
@@ -41,15 +44,49 @@
 #include <plat/mcspi.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/nand.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 
+#define PANDORA_WIFI_IRQ_GPIO		21
+#define PANDORA_WIFI_NRESET_GPIO	23
 #define OMAP3_PANDORA_TS_GPIO		94
 
-/* hardware debounce: (value + 1) * 31us */
-#define GPIO_DEBOUNCE_TIME		127
+#define NAND_BLOCK_SIZE			SZ_128K
+
+static struct mtd_partition omap3pandora_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	}, {
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 15 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "uboot-env",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 1 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "boot",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 80 * NAND_BLOCK_SIZE,
+	}, {
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data pandora_nand_data = {
+	.cs		= 0,
+	.devsize	= 1,	/* '0' for 8-bit, '1' for 16-bit device */
+	.parts		= omap3pandora_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3pandora_nand_partitions),
+};
 
 static struct gpio_led pandora_gpio_leds[] = {
 	{
@@ -88,6 +125,7 @@ static struct platform_device pandora_leds_gpio = {
 	.type		= ev_type,				\
 	.code		= ev_code,				\
 	.active_low	= act_low,				\
+	.debounce_interval = 4,					\
 	.desc		= "btn " descr,				\
 }
 
@@ -99,14 +137,14 @@ static struct gpio_keys_button pandora_gpio_keys[] = {
 	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
 	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
 	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
-	GPIO_BUTTON_LOW(109,	KEY_KP1,	"game 1"),
-	GPIO_BUTTON_LOW(111,	KEY_KP2,	"game 2"),
-	GPIO_BUTTON_LOW(106,	KEY_KP3,	"game 3"),
-	GPIO_BUTTON_LOW(101,	KEY_KP4,	"game 4"),
-	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
-	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
-	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
-	GPIO_BUTTON_LOW(107,	BTN_TR2,	"r2"),
+	GPIO_BUTTON_LOW(109,	KEY_PAGEUP,	"game 1"),
+	GPIO_BUTTON_LOW(111,	KEY_END,	"game 2"),
+	GPIO_BUTTON_LOW(106,	KEY_PAGEDOWN,	"game 3"),
+	GPIO_BUTTON_LOW(101,	KEY_HOME,	"game 4"),
+	GPIO_BUTTON_LOW(102,	KEY_RIGHTSHIFT,	"l"),
+	GPIO_BUTTON_LOW(97,	KEY_KPPLUS,	"l2"),
+	GPIO_BUTTON_LOW(105,	KEY_RIGHTCTRL,	"r"),
+	GPIO_BUTTON_LOW(107,	KEY_KPMINUS,	"r2"),
 	GPIO_BUTTON_LOW(104,	KEY_LEFTCTRL,	"ctrl"),
 	GPIO_BUTTON_LOW(99,	KEY_MENU,	"menu"),
 	GPIO_BUTTON_LOW(176,	KEY_COFFEE,	"hold"),
@@ -127,14 +165,7 @@ static struct platform_device pandora_keys_gpio = {
 	},
 };
 
-static void __init pandora_keys_gpio_init(void)
-{
-	/* set debounce time for GPIO banks 4 and 6 */
-	gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME);
-	gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME);
-}
-
-static int board_keymap[] = {
+static const uint32_t board_keymap[] = {
 	/* row, col, code */
 	KEY(0, 0, KEY_9),
 	KEY(0, 1, KEY_8),
@@ -255,12 +286,33 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 static int omap3pandora_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int ret, gpio_32khz;
+
 	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
 	omap3pandora_mmc[0].gpio_cd = gpio + 0;
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
 	omap2_hsmmc_init(omap3pandora_mmc);
 
+	/* gpio + 13 drives 32kHz buffer for wifi module */
+	gpio_32khz = gpio + 13;
+	ret = gpio_request(gpio_32khz, "wifi 32kHz");
+	if (ret < 0) {
+		pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail;
+	}
+
+	ret = gpio_direction_output(gpio_32khz, 1);
+	if (ret < 0) {
+		pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret);
+		goto fail_direction;
+	}
+
 	return 0;
+
+fail_direction:
+	gpio_free(gpio_32khz);
+fail:
+	return -ENODEV;
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
@@ -539,10 +591,67 @@ static void __init omap3pandora_init_irq(void)
 	omap_gpio_init();
 }
 
+static void pandora_wl1251_set_power(bool enable)
+{
+	/*
+	 * Keep power always on until wl1251_sdio driver learns to re-init
+	 * the chip after powering it down and back up.
+	 */
+}
+
+static struct wl12xx_platform_data pandora_wl1251_pdata = {
+	.set_power	= pandora_wl1251_set_power,
+	.use_eeprom	= true,
+};
+
+static struct platform_device pandora_wl1251_data = {
+	.name           = "wl1251_data",
+	.id             = -1,
+	.dev		= {
+		.platform_data	= &pandora_wl1251_pdata,
+	},
+};
+
+static void pandora_wl1251_init(void)
+{
+	int ret;
+
+	ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
+	if (ret < 0)
+		goto fail;
+
+	ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO);
+	if (ret < 0)
+		goto fail_irq;
+
+	pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
+	if (pandora_wl1251_pdata.irq < 0)
+		goto fail_irq;
+
+	ret = gpio_request(PANDORA_WIFI_NRESET_GPIO, "wl1251 nreset");
+	if (ret < 0)
+		goto fail_irq;
+
+	/* start powered so that it probes with MMC subsystem */
+	ret = gpio_direction_output(PANDORA_WIFI_NRESET_GPIO, 1);
+	if (ret < 0)
+		goto fail_nreset;
+
+	return;
+
+fail_nreset:
+	gpio_free(PANDORA_WIFI_NRESET_GPIO);
+fail_irq:
+	gpio_free(PANDORA_WIFI_IRQ_GPIO);
+fail:
+	printk(KERN_ERR "wl1251 board initialisation failed\n");
+}
+
 static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
 	&pandora_dss_device,
+	&pandora_wl1251_data,
 };
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -575,6 +684,7 @@ static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3pandora_i2c_init();
+	pandora_wl1251_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
 	omap_serial_init();
@@ -582,25 +692,19 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
 	usb_ehci_init(&ehci_pdata);
-	pandora_keys_gpio_init();
 	usb_musb_init(&musb_board_data);
+	gpmc_nand_init(&pandora_nand_data);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3pandora_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3pandora_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3pandora_init_irq,
 	.init_machine	= omap3pandora_init,

arch/arm/mach-omap2/board-omap3stalker.c

@@ -652,18 +652,12 @@ static void __init omap3_stalker_init(void)
 	omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3_stalker_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
 	.phys_io		= 0x48000000,
 	.io_pg_offst		= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params		= 0x80000100,
-	.map_io			= omap3_stalker_map_io,
+	.map_io			= omap3_map_io,
 	.init_irq		= omap3_stalker_init_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap_timer,

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -54,9 +54,6 @@
 
 #include <asm/setup.h>
 
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
-
 #define NAND_BLOCK_SIZE		SZ_128K
 
 #define OMAP3_AC_GPIO		136
@@ -106,20 +103,6 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = {
 	.dev_ready	= NULL,
 };
 
-static struct resource omap3touchbook_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device omap3touchbook_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &omap3touchbook_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &omap3touchbook_nand_resource,
-};
-
 #include "sdram-micron-mt46h32m32lf-6.h"
 
 static struct omap2_hsmmc_info mmc[] = {
@@ -458,8 +441,6 @@ static void __init omap3touchbook_flash_init(void)
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -481,13 +462,9 @@ static void __init omap3touchbook_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		omap3touchbook_nand_data.cs = nandcs;
-		omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		omap3touchbook_nand_data.gpmc_baseaddr =
-						(void *) (gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&omap3touchbook_nand_device) < 0)
+		if (gpmc_nand_init(&omap3touchbook_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -559,18 +536,12 @@ static void __init omap3_touchbook_init(void)
 	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
-static void __init omap3_touchbook_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_touchbook_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,

arch/arm/mach-omap2/board-omap4panda.c

@@ -0,0 +1,304 @@
+/*
+ * Board support file for OMAP4430 based PandaBoard.
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: David Anders <x0132446@ti.com>
+ *
+ * Based on mach-omap2/board-4430sdp.c
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
+
+#include <mach/hardware.h>
+#include <mach/omap4-common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/timer-gp.h>
+#include <plat/usb.h>
+#include <plat/mmc.h>
+#include "hsmmc.h"
+
+
+static void __init omap4_panda_init_irq(void)
+{
+	omap2_init_common_hw(NULL, NULL);
+	gic_init_irq();
+	omap_gpio_init();
+}
+
+static struct omap_musb_board_data musb_board_data = {
+	.interface_type		= MUSB_INTERFACE_UTMI,
+	.mode			= MUSB_PERIPHERAL,
+	.power			= 100,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= -EINVAL,
+	},
+	{}	/* Terminator */
+};
+
+static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.0",
+	},
+	{
+		.supply = "vmmc",
+		.dev_name = "mmci-omap-hs.1",
+	},
+};
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_device *pdev = container_of(dev,
+				struct platform_device, dev);
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	/* Setting MMC1 Card detect Irq */
+	if (pdev->id == 0)
+		pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
+						MMCDETECT_INTR_OFFSET;
+	return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+	struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+	pdata->init =	omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	struct omap2_hsmmc_info *c;
+
+	omap2_hsmmc_init(controllers);
+	for (c = controllers; c->mmc; c++)
+		omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+	return 0;
+}
+
+static struct regulator_init_data omap4_panda_vaux1 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vaux2 = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vaux3 = {
+	.constraints = {
+		.min_uV			= 1000000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+/* VMMC1 for MMC1 card */
+static struct regulator_init_data omap4_panda_vmmc = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 3000000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 2,
+	.consumer_supplies      = omap4_panda_vmmc_supply,
+};
+
+static struct regulator_init_data omap4_panda_vpp = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 2500000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vusim = {
+	.constraints = {
+		.min_uV			= 1200000,
+		.max_uV			= 2900000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vana = {
+	.constraints = {
+		.min_uV			= 2100000,
+		.max_uV			= 2100000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vcxio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 = REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct regulator_init_data omap4_panda_vusb = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask	 =	REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static struct twl4030_platform_data omap4_panda_twldata = {
+	.irq_base	= TWL6030_IRQ_BASE,
+	.irq_end	= TWL6030_IRQ_END,
+
+	/* Regulators */
+	.vmmc		= &omap4_panda_vmmc,
+	.vpp		= &omap4_panda_vpp,
+	.vusim		= &omap4_panda_vusim,
+	.vana		= &omap4_panda_vana,
+	.vcxio		= &omap4_panda_vcxio,
+	.vdac		= &omap4_panda_vdac,
+	.vusb		= &omap4_panda_vusb,
+	.vaux1		= &omap4_panda_vaux1,
+	.vaux2		= &omap4_panda_vaux2,
+	.vaux3		= &omap4_panda_vaux3,
+};
+
+static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl6030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = OMAP44XX_IRQ_SYS_1N,
+		.platform_data = &omap4_panda_twldata,
+	},
+};
+static int __init omap4_panda_i2c_init(void)
+{
+	/*
+	 * Phoenix Audio IC needs I2C1 to
+	 * start with 400 KHz or less
+	 */
+	omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo,
+			ARRAY_SIZE(omap4_panda_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(4, 400, NULL, 0);
+	return 0;
+}
+static void __init omap4_panda_init(void)
+{
+	int status;
+
+	omap4_panda_i2c_init();
+	omap_serial_init();
+	omap4_twl6030_hsmmc_init(mmc);
+	/* OMAP4 Panda uses internal transceiver so register nop transceiver */
+	usb_nop_xceiv_register();
+	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
+	if (!cpu_is_omap44xx())
+		usb_musb_init(&musb_board_data);
+}
+
+static void __init omap4_panda_map_io(void)
+{
+	omap2_set_globals_443x();
+	omap44xx_map_common_io();
+}
+
+MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
+	/* Maintainer: David Anders - Texas Instruments Inc */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap4_panda_map_io,
+	.init_irq	= omap4_panda_init_irq,
+	.init_machine	= omap4_panda_init,
+	.timer		= &omap_timer,
+MACHINE_END

arch/arm/mach-omap2/board-overo.c

@@ -58,8 +58,6 @@
 #define OVERO_GPIO_USBH_NRESET	183
 
 #define NAND_BLOCK_SIZE SZ_128K
-#define GPMC_CS0_BASE  0x60
-#define GPMC_CS_SIZE   0x30
 
 #define OVERO_SMSC911X_CS      5
 #define OVERO_SMSC911X_GPIO    176
@@ -166,9 +164,26 @@ static struct platform_device overo_smsc911x_device = {
 	},
 };
 
+static struct platform_device overo_smsc911x2_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(overo_smsc911x2_resources),
+	.resource	= overo_smsc911x2_resources,
+	.dev		= {
+		.platform_data = &overo_smsc911x_config,
+	},
+};
+
+static struct platform_device *smsc911x_devices[] = {
+	&overo_smsc911x_device,
+	&overo_smsc911x2_device,
+};
+
 static inline void __init overo_init_smsc911x(void)
 {
-	unsigned long cs_mem_base;
+	unsigned long cs_mem_base, cs_mem_base2;
+
+	/* set up first smsc911x chip */
 
 	if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n");
@@ -189,7 +204,28 @@ static inline void __init overo_init_smsc911x(void)
 	overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO);
 	overo_smsc911x_resources[1].end	  = 0;
 
-	platform_device_register(&overo_smsc911x_device);
+	/* set up second smsc911x chip */
+
+	if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) {
+		printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n");
+		return;
+	}
+
+	overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0;
+	overo_smsc911x2_resources[0].end   = cs_mem_base2 + 0xff;
+
+	if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) &&
+	    (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) {
+		gpio_export(OVERO_SMSC911X2_GPIO, 0);
+	} else {
+		printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n");
+		return;
+	}
+
+	overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO);
+	overo_smsc911x2_resources[1].end   = 0;
+
+	platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices));
 }
 
 #else
@@ -231,28 +267,11 @@ static struct omap_nand_platform_data overo_nand_data = {
 	.dma_channel = -1,	/* disable DMA in OMAP NAND driver */
 };
 
-static struct resource overo_nand_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device overo_nand_device = {
-	.name		= "omap2-nand",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &overo_nand_data,
-	},
-	.num_resources	= 1,
-	.resource	= &overo_nand_resource,
-};
-
-
 static void __init overo_flash_init(void)
 {
 	u8 cs = 0;
 	u8 nandcs = GPMC_CS_NUM + 1;
 
-	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
-
 	/* find out the chip-select on which NAND exists */
 	while (cs < GPMC_CS_NUM) {
 		u32 ret = 0;
@@ -274,12 +293,9 @@ static void __init overo_flash_init(void)
 
 	if (nandcs < GPMC_CS_NUM) {
 		overo_nand_data.cs = nandcs;
-		overo_nand_data.gpmc_cs_baseaddr = (void *)
-			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
-		overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add);
 
 		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (platform_device_register(&overo_nand_device) < 0)
+		if (gpmc_nand_init(&overo_nand_data) < 0)
 			printk(KERN_ERR "Unable to register NAND device\n");
 	}
 }
@@ -484,17 +500,11 @@ static void __init overo_init(void)
 					"OVERO_GPIO_USBH_CPEN\n");
 }
 
-static void __init overo_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OVERO, "Gumstix Overo")
 	.phys_io	= 0x48000000,
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= overo_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= overo_init_irq,
 	.init_machine	= overo_init,

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -25,7 +25,6 @@
 #include <linux/mmc/host.h>
 
 #include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/dma.h>
@@ -33,6 +32,11 @@
 #include <plat/onenand.h>
 #include <plat/gpmc-smc91x.h>
 
+#include <sound/tlv320aic3x.h>
+#include <sound/tpa6130a2-plat.h>
+
+#include <../drivers/staging/iio/light/tsl2563.h>
+
 #include "mux.h"
 #include "hsmmc.h"
 
@@ -51,6 +55,12 @@ enum {
 
 static struct wl12xx_platform_data wl1251_pdata;
 
+#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
+static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
+	.cover_comp_gain = 16,
+};
+#endif
+
 static struct omap2_mcspi_device_config wl1251_mcspi_config = {
 	.turbo_mode	= 0,
 	.single_channel	= 1,
@@ -311,48 +321,29 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{}	/* Terminator */
 };
 
-static struct regulator_consumer_supply rx51_vmmc1_supply = {
-	.supply   = "vmmc",
-	.dev_name = "mmci-omap-hs.0",
-};
+static struct regulator_consumer_supply rx51_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
 
-static struct regulator_consumer_supply rx51_vaux3_supply = {
-	.supply   = "vmmc",
-	.dev_name = "mmci-omap-hs.1",
-};
+static struct regulator_consumer_supply rx51_vaux3_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
 
-static struct regulator_consumer_supply rx51_vsim_supply = {
-	.supply   = "vmmc_aux",
-	.dev_name = "mmci-omap-hs.1",
-};
+static struct regulator_consumer_supply rx51_vsim_supply =
+	REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
 
 static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
 	/* tlv320aic3x analog supplies */
-	{
-		.supply		= "AVDD",
-		.dev_name	= "2-0018",
-	},
-	{
-		.supply		= "DRVDD",
-		.dev_name	= "2-0018",
-	},
+	REGULATOR_SUPPLY("AVDD", "2-0018"),
+	REGULATOR_SUPPLY("DRVDD", "2-0018"),
+	/* tpa6130a2 */
+	REGULATOR_SUPPLY("Vdd", "2-0060"),
 	/* Keep vmmc as last item. It is not iterated for newer boards */
-	{
-		.supply		= "vmmc",
-		.dev_name	= "mmci-omap-hs.1",
-	},
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
 };
 
 static struct regulator_consumer_supply rx51_vio_supplies[] = {
 	/* tlv320aic3x digital supplies */
-	{
-		.supply		= "IOVDD",
-		.dev_name	= "2-0018"
-	},
-	{
-		.supply		= "DVDD",
-		.dev_name	= "2-0018"
-	},
+	REGULATOR_SUPPLY("IOVDD", "2-0018"),
+	REGULATOR_SUPPLY("DVDD", "2-0018"),
 };
 
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -373,6 +364,7 @@ static struct regulator_init_data rx51_vaux1 = {
 		.name			= "V28",
 		.min_uV			= 2800000,
 		.max_uV			= 2800000,
+		.always_on		= true, /* due battery cover sensor */
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
@@ -718,6 +710,15 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vio			= &rx51_vio,
 };
 
+static struct aic3x_pdata rx51_aic3x_data __initdata = {
+	.gpio_reset		= 60,
+};
+
+static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = {
+	.id			= TPA6130A2,
+	.power_gpio		= 98,
+};
+
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 	{
 		I2C_BOARD_INFO("twl5030", 0x48),
@@ -730,7 +731,18 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = {
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+		.platform_data = &rx51_aic3x_data,
+	},
+#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
+	{
+		I2C_BOARD_INFO("tsl2563", 0x29),
+		.platform_data = &rx51_tsl2563_platform_data,
 	},
+#endif
+	{
+		I2C_BOARD_INFO("tpa6130a2", 0x60),
+		.platform_data = &rx51_tpa6130a2_data,
+	}
 };
 
 static int __init rx51_i2c_init(void)

arch/arm/mach-omap2/board-rx51-video.c

@@ -16,7 +16,6 @@
 #include <linux/mm.h>
 
 #include <asm/mach-types.h>
-#include <plat/mux.h>
 #include <plat/display.h>
 #include <plat/vram.h>
 #include <plat/mcspi.h>

arch/arm/mach-omap2/board-rx51.c

@@ -143,7 +143,7 @@ static void __init rx51_init(void)
 
 static void __init rx51_map_io(void)
 {
-	omap2_set_globals_343x();
+	omap2_set_globals_3xxx();
 	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }

arch/arm/mach-omap2/board-zoom2.c

@@ -71,30 +71,80 @@ static struct twl4030_platform_data zoom2_twldata = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 162 */
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN POWER ENABLE - GPIO 101 */
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC3 CMD */
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 CLK */
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 DAT[0-3] */
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
 #define board_mux	NULL
 #endif
 
+static struct mtd_partition zoom_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "system",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
+	},
+	{
+		.name		= "userdata",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+	{
+		.name		= "cache",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+};
+
 static void __init omap_zoom2_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	zoom_peripherals_init();
+	board_nand_init(zoom_nand_partitions,
+			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
 }
 
-static void __init omap_zoom2_map_io(void)
-{
-	omap2_set_globals_343x();
-	omap34xx_map_common_io();
-}
-
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.phys_io	= ZOOM_UART_BASE,
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_zoom2_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom2_init_irq,
 	.init_machine	= omap_zoom2_init,

arch/arm/mach-omap2/board-zoom3.c

@@ -25,15 +25,50 @@
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
-static void __init omap_zoom_map_io(void)
-{
-	omap2_set_globals_36xx();
-	omap34xx_map_common_io();
-}
-
 static struct omap_board_config_kernel zoom_config[] __initdata = {
 };
 
+static struct mtd_partition zoom_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "system",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
+	},
+	{
+		.name		= "userdata",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+	{
+		.name		= "cache",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+};
+
 static void __init omap_zoom_init_irq(void)
 {
 	omap_board_config = zoom_config;
@@ -46,6 +81,19 @@ static void __init omap_zoom_init_irq(void)
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 162 */
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN POWER ENABLE - GPIO 101 */
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC3 CMD */
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 CLK */
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 DAT[0-3] */
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else
@@ -66,6 +114,8 @@ static void __init omap_zoom_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	zoom_peripherals_init();
+	board_nand_init(zoom_nand_partitions,
+			 ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
 
 	omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
@@ -76,7 +126,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.phys_io	= ZOOM_UART_BASE,
 	.io_pg_offst	= (ZOOM_UART_VIRT >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
-	.map_io		= omap_zoom_map_io,
+	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_zoom_init_irq,
 	.init_machine	= omap_zoom_init,

arch/arm/mach-omap2/clock3xxx_data.c

@@ -1408,7 +1408,7 @@ static struct clk ts_fck = {
 
 static struct clk usbtll_fck = {
 	.name		= "usbtll_fck",
-	.ops		= &clkops_omap2_dflt,
+	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &dpll5_m2_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
 	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,

arch/arm/mach-omap2/cm.c

@@ -50,15 +50,15 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
 
 	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
 
+	mask = 1 << idlest_shift;
+
 	if (cpu_is_omap24xx())
-		ena = idlest_shift;
+		ena = mask;
 	else if (cpu_is_omap34xx())
 		ena = 0;
 	else
 		BUG();
 
-	mask = 1 << idlest_shift;
-
 	/* XXX should be OMAP2 CM */
 	omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
 			  MAX_MODULE_READY_TIME, i);

arch/arm/mach-omap2/devices.c

@@ -25,7 +25,6 @@
 #include <plat/control.h>
 #include <plat/tc.h>
 #include <plat/board.h>
-#include <plat/mux.h>
 #include <mach/gpio.h>
 #include <plat/mmc.h>
 #include <plat/dma.h>
@@ -153,10 +152,12 @@ static struct resource omap2_mbox_resources[] = {
 	{
 		.start		= INT_24XX_MAIL_U0_MPU,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "dsp",
 	},
 	{
 		.start		= INT_24XX_MAIL_U3_MPU,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "iva",
 	},
 };
 static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources);
@@ -175,6 +176,7 @@ static struct resource omap3_mbox_resources[] = {
 	{
 		.start		= INT_24XX_MAIL_U0_MPU,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "dsp",
 	},
 };
 static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources);
@@ -196,6 +198,7 @@ static struct resource omap4_mbox_resources[] = {
 	{
 		.start          = OMAP44XX_IRQ_MAIL_U0,
 		.flags          = IORESOURCE_IRQ,
+		.name		= "mbox",
 	},
 };
 static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
@@ -205,7 +208,7 @@ static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
 #endif
 
 static struct platform_device mbox_device = {
-	.name		= "omap2-mailbox",
+	.name		= "omap-mailbox",
 	.id		= -1,
 };
 
@@ -230,64 +233,7 @@ static inline void omap_init_mbox(void)
 static inline void omap_init_mbox(void) { }
 #endif /* CONFIG_OMAP_MBOX_FWK */
 
-#if defined(CONFIG_OMAP_STI)
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-#define OMAP2_STI_BASE		0x48068000
-#define OMAP2_STI_CHANNEL_BASE	0x54000000
-#define OMAP2_STI_IRQ		4
-
-static struct resource sti_resources[] = {
-	{
-		.start		= OMAP2_STI_BASE,
-		.end		= OMAP2_STI_BASE + 0x7ff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP2_STI_CHANNEL_BASE,
-		.end		= OMAP2_STI_CHANNEL_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP2_STI_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-#elif defined(CONFIG_ARCH_OMAP3)
-
-#define OMAP3_SDTI_BASE		0x54500000
-#define OMAP3_SDTI_CHANNEL_BASE	0x54600000
-
-static struct resource sti_resources[] = {
-	{
-		.start		= OMAP3_SDTI_BASE,
-		.end		= OMAP3_SDTI_BASE + 0xFFF,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3_SDTI_CHANNEL_BASE,
-		.end		= OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-#endif
-
-static struct platform_device sti_device = {
-	.name		= "sti",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sti_resources),
-	.resource	= sti_resources,
-};
-
-static inline void omap_init_sti(void)
-{
-	platform_device_register(&sti_device);
-}
-#else
 static inline void omap_init_sti(void) {}
-#endif
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
@@ -672,19 +618,19 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 					OMAP_PIN_INPUT_PULLUP);
 
 	if (cpu_is_omap2420() && controller_nr == 0) {
-		omap_cfg_reg(H18_24XX_MMC_CMD);
-		omap_cfg_reg(H15_24XX_MMC_CLKI);
-		omap_cfg_reg(G19_24XX_MMC_CLKO);
-		omap_cfg_reg(F20_24XX_MMC_DAT0);
-		omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
-		omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
+		omap_mux_init_signal("sdmmc_cmd", 0);
+		omap_mux_init_signal("sdmmc_clki", 0);
+		omap_mux_init_signal("sdmmc_clko", 0);
+		omap_mux_init_signal("sdmmc_dat0", 0);
+		omap_mux_init_signal("sdmmc_dat_dir0", 0);
+		omap_mux_init_signal("sdmmc_cmd_dir", 0);
 		if (mmc_controller->slots[0].wires == 4) {
-			omap_cfg_reg(H14_24XX_MMC_DAT1);
-			omap_cfg_reg(E19_24XX_MMC_DAT2);
-			omap_cfg_reg(D19_24XX_MMC_DAT3);
-			omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
-			omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
-			omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
+			omap_mux_init_signal("sdmmc_dat1", 0);
+			omap_mux_init_signal("sdmmc_dat2", 0);
+			omap_mux_init_signal("sdmmc_dat3", 0);
+			omap_mux_init_signal("sdmmc_dat_dir1", 0);
+			omap_mux_init_signal("sdmmc_dat_dir2", 0);
+			omap_mux_init_signal("sdmmc_dat_dir3", 0);
 		}
 
 		/*

arch/arm/mach-omap2/gpmc-nand.c

@@ -19,8 +19,6 @@
 #include <plat/board.h>
 #include <plat/gpmc.h>
 
-#define WR_RD_PIN_MONITORING	0x00600000
-
 static struct omap_nand_platform_data *gpmc_nand_data;
 
 static struct resource gpmc_nand_resource = {
@@ -71,10 +69,10 @@ static int omap2_nand_gpmc_retime(void)
 	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
 
 	/* Configure GPMC */
-	gpmc_cs_write_reg(gpmc_nand_data->cs, GPMC_CS_CONFIG1,
-			GPMC_CONFIG1_DEVICESIZE(gpmc_nand_data->devsize) |
-			GPMC_CONFIG1_DEVICETYPE_NAND);
-
+	gpmc_cs_configure(gpmc_nand_data->cs,
+				GPMC_CONFIG_DEV_SIZE, gpmc_nand_data->devsize);
+	gpmc_cs_configure(gpmc_nand_data->cs,
+			GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
 	err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
 	if (err)
 		return err;
@@ -82,27 +80,13 @@ static int omap2_nand_gpmc_retime(void)
 	return 0;
 }
 
-static int gpmc_nand_setup(void)
-{
-	struct device *dev = &gpmc_nand_device.dev;
-
-	/* Set timings in GPMC */
-	if (omap2_nand_gpmc_retime() < 0) {
-		dev_err(dev, "Unable to set gpmc timings\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
 {
-	unsigned int val;
 	int err	= 0;
 	struct device *dev = &gpmc_nand_device.dev;
 
 	gpmc_nand_data = _nand_data;
-	gpmc_nand_data->nand_setup = gpmc_nand_setup;
+	gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime;
 	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
 
 	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
@@ -112,19 +96,16 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
 		return err;
 	}
 
-	err = gpmc_nand_setup();
+	 /* Set timings in GPMC */
+	err = omap2_nand_gpmc_retime();
 	if (err < 0) {
-		dev_err(dev, "NAND platform setup failed: %d\n", err);
+		dev_err(dev, "Unable to set gpmc timings: %d\n", err);
 		return err;
 	}
 
 	/* Enable RD PIN Monitoring Reg */
 	if (gpmc_nand_data->dev_ready) {
-		val  = gpmc_cs_read_reg(gpmc_nand_data->cs,
-						 GPMC_CS_CONFIG1);
-		val |= WR_RD_PIN_MONITORING;
-		gpmc_cs_write_reg(gpmc_nand_data->cs,
-						GPMC_CS_CONFIG1, val);
+		gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
 	}
 
 	err = platform_device_register(&gpmc_nand_device);

arch/arm/mach-omap2/gpmc.c

@@ -46,8 +46,9 @@
 #define GPMC_ECC_CONFIG		0x1f4
 #define GPMC_ECC_CONTROL	0x1f8
 #define GPMC_ECC_SIZE_CONFIG	0x1fc
+#define GPMC_ECC1_RESULT        0x200
 
-#define GPMC_CS0		0x60
+#define GPMC_CS0_OFFSET		0x60
 #define GPMC_CS_SIZE		0x30
 
 #define GPMC_MEM_START		0x00000000
@@ -92,7 +93,8 @@ struct omap3_gpmc_regs {
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
-static unsigned		gpmc_cs_map;
+static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
+static int gpmc_ecc_used = -EINVAL;	/* cs using ecc engine */
 
 static void __iomem *gpmc_base;
 
@@ -108,11 +110,27 @@ static u32 gpmc_read_reg(int idx)
 	return __raw_readl(gpmc_base + idx);
 }
 
+static void gpmc_cs_write_byte(int cs, int idx, u8 val)
+{
+	void __iomem *reg_addr;
+
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
+	__raw_writeb(val, reg_addr);
+}
+
+static u8 gpmc_cs_read_byte(int cs, int idx)
+{
+	void __iomem *reg_addr;
+
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
+	return __raw_readb(reg_addr);
+}
+
 void gpmc_cs_write_reg(int cs, int idx, u32 val)
 {
 	void __iomem *reg_addr;
 
-	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
 	__raw_writel(val, reg_addr);
 }
 
@@ -120,7 +138,7 @@ u32 gpmc_cs_read_reg(int cs, int idx)
 {
 	void __iomem *reg_addr;
 
-	reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
+	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
 	return __raw_readl(reg_addr);
 }
 
@@ -418,9 +436,158 @@ void gpmc_cs_free(int cs)
 }
 EXPORT_SYMBOL(gpmc_cs_free);
 
+/**
+ * gpmc_read_status - read access request to get the different gpmc status
+ * @cmd: command type
+ * @return status
+ */
+int gpmc_read_status(int cmd)
+{
+	int	status = -EINVAL;
+	u32	regval = 0;
+
+	switch (cmd) {
+	case GPMC_GET_IRQ_STATUS:
+		status = gpmc_read_reg(GPMC_IRQSTATUS);
+		break;
+
+	case GPMC_PREFETCH_FIFO_CNT:
+		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
+		status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
+		break;
+
+	case GPMC_PREFETCH_COUNT:
+		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
+		status = GPMC_PREFETCH_STATUS_COUNT(regval);
+		break;
+
+	case GPMC_STATUS_BUFFER:
+		regval = gpmc_read_reg(GPMC_STATUS);
+		/* 1 : buffer is available to write */
+		status = regval & GPMC_STATUS_BUFF_EMPTY;
+		break;
+
+	default:
+		printk(KERN_ERR "gpmc_read_status: Not supported\n");
+	}
+	return status;
+}
+EXPORT_SYMBOL(gpmc_read_status);
+
+/**
+ * gpmc_cs_configure - write request to configure gpmc
+ * @cs: chip select number
+ * @cmd: command type
+ * @wval: value to write
+ * @return status of the operation
+ */
+int gpmc_cs_configure(int cs, int cmd, int wval)
+{
+	int err = 0;
+	u32 regval = 0;
+
+	switch (cmd) {
+	case GPMC_SET_IRQ_STATUS:
+		gpmc_write_reg(GPMC_IRQSTATUS, wval);
+		break;
+
+	case GPMC_CONFIG_WP:
+		regval = gpmc_read_reg(GPMC_CONFIG);
+		if (wval)
+			regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
+		else
+			regval |= GPMC_CONFIG_WRITEPROTECT;  /* WP is OFF */
+		gpmc_write_reg(GPMC_CONFIG, regval);
+		break;
+
+	case GPMC_CONFIG_RDY_BSY:
+		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		if (wval)
+			regval |= WR_RD_PIN_MONITORING;
+		else
+			regval &= ~WR_RD_PIN_MONITORING;
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
+		break;
+
+	case GPMC_CONFIG_DEV_SIZE:
+		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		regval |= GPMC_CONFIG1_DEVICESIZE(wval);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
+		break;
+
+	case GPMC_CONFIG_DEV_TYPE:
+		regval  = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+		regval |= GPMC_CONFIG1_DEVICETYPE(wval);
+		if (wval == GPMC_DEVICETYPE_NOR)
+			regval |= GPMC_CONFIG1_MUXADDDATA;
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
+		break;
+
+	default:
+		printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
+		err = -EINVAL;
+	}
+
+	return err;
+}
+EXPORT_SYMBOL(gpmc_cs_configure);
+
+/**
+ * gpmc_nand_read - nand specific read access request
+ * @cs: chip select number
+ * @cmd: command type
+ */
+int gpmc_nand_read(int cs, int cmd)
+{
+	int rval = -EINVAL;
+
+	switch (cmd) {
+	case GPMC_NAND_DATA:
+		rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
+		break;
+
+	default:
+		printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
+	}
+	return rval;
+}
+EXPORT_SYMBOL(gpmc_nand_read);
+
+/**
+ * gpmc_nand_write - nand specific write request
+ * @cs: chip select number
+ * @cmd: command type
+ * @wval: value to write
+ */
+int gpmc_nand_write(int cs, int cmd, int wval)
+{
+	int err = 0;
+
+	switch (cmd) {
+	case GPMC_NAND_COMMAND:
+		gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
+		break;
+
+	case GPMC_NAND_ADDRESS:
+		gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
+		break;
+
+	case GPMC_NAND_DATA:
+		gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
+
+	default:
+		printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
+		err = -EINVAL;
+	}
+	return err;
+}
+EXPORT_SYMBOL(gpmc_nand_write);
+
+
+
 /**
  * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: nand cs (chip select) number
+ * @cs: cs (chip select) number
  * @dma_mode: dma mode enable (1) or disable (0)
  * @u32_count: number of bytes to be transferred
  * @is_write: prefetch read(0) or write post(1) mode
@@ -428,7 +595,6 @@ EXPORT_SYMBOL(gpmc_cs_free);
 int gpmc_prefetch_enable(int cs, int dma_mode,
 				unsigned int u32_count, int is_write)
 {
-	uint32_t prefetch_config1;
 
 	if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
 		/* Set the amount of bytes to be prefetched */
@@ -437,17 +603,17 @@ int gpmc_prefetch_enable(int cs, int dma_mode,
 		/* Set dma/mpu mode, the prefetch read / post write and
 		 * enable the engine. Set which cs is has requested for.
 		 */
-		prefetch_config1 = ((cs << CS_NUM_SHIFT) |
+		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
 					PREFETCH_FIFOTHRESHOLD |
 					ENABLE_PREFETCH |
 					(dma_mode << DMA_MPU_MODE) |
-					(0x1 & is_write));
-		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1);
+					(0x1 & is_write)));
+
+		/*  Start the prefetch engine */
+		gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
 	} else {
 		return -EBUSY;
 	}
-	/*  Start the prefetch engine */
-	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
 
 	return 0;
 }
@@ -456,24 +622,24 @@ EXPORT_SYMBOL(gpmc_prefetch_enable);
 /**
  * gpmc_prefetch_reset - disables and stops the prefetch engine
  */
-void gpmc_prefetch_reset(void)
+int gpmc_prefetch_reset(int cs)
 {
+	u32 config1;
+
+	/* check if the same module/cs is trying to reset */
+	config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
+	if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
+		return -EINVAL;
+
 	/* Stop the PFPW engine */
 	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
 
 	/* Reset/disable the PFPW engine */
 	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
 
-/**
- * gpmc_prefetch_status - reads prefetch status of engine
- */
-int  gpmc_prefetch_status(void)
-{
-	return gpmc_read_reg(GPMC_PREFETCH_STATUS);
+	return 0;
 }
-EXPORT_SYMBOL(gpmc_prefetch_status);
+EXPORT_SYMBOL(gpmc_prefetch_reset);
 
 static void __init gpmc_mem_init(void)
 {
@@ -615,3 +781,79 @@ void omap3_gpmc_restore_context(void)
 	}
 }
 #endif /* CONFIG_ARCH_OMAP3 */
+
+/**
+ * gpmc_enable_hwecc - enable hardware ecc functionality
+ * @cs: chip select number
+ * @mode: read/write mode
+ * @dev_width: device bus width(1 for x16, 0 for x8)
+ * @ecc_size: bytes for which ECC will be generated
+ */
+int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
+{
+	unsigned int val;
+
+	/* check if ecc module is in used */
+	if (gpmc_ecc_used != -EINVAL)
+		return -EINVAL;
+
+	gpmc_ecc_used = cs;
+
+	/* clear ecc and enable bits */
+	val = ((0x00000001<<8) | 0x00000001);
+	gpmc_write_reg(GPMC_ECC_CONTROL, val);
+
+	/* program ecc and result sizes */
+	val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
+	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
+
+	switch (mode) {
+	case GPMC_ECC_READ:
+		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+		break;
+	case GPMC_ECC_READSYN:
+		 gpmc_write_reg(GPMC_ECC_CONTROL, 0x100);
+		break;
+	case GPMC_ECC_WRITE:
+		gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+		break;
+	default:
+		printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
+		break;
+	}
+
+	/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
+	val = (dev_width << 7) | (cs << 1) | (0x1);
+	gpmc_write_reg(GPMC_ECC_CONFIG, val);
+	return 0;
+}
+
+/**
+ * gpmc_calculate_ecc - generate non-inverted ecc bytes
+ * @cs: chip select number
+ * @dat: data pointer over which ecc is computed
+ * @ecc_code: ecc code buffer
+ *
+ * Using non-inverted ECC is considered ugly since writing a blank
+ * page (padding) will clear the ECC bytes. This is not a problem as long
+ * no one is trying to write data on the seemingly unused page. Reading
+ * an erased page will produce an ECC mismatch between generated and read
+ * ECC bytes that has to be dealt with separately.
+ */
+int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
+{
+	unsigned int val = 0x0;
+
+	if (gpmc_ecc_used != cs)
+		return -EINVAL;
+
+	/* read ecc result */
+	val = gpmc_read_reg(GPMC_ECC1_RESULT);
+	*ecc_code++ = val;          /* P128e, ..., P1e */
+	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
+	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+
+	gpmc_ecc_used = -EINVAL;
+	return 0;
+}

arch/arm/mach-omap2/i2c.c

@@ -21,32 +21,19 @@
 
 #include <plat/cpu.h>
 #include <plat/i2c.h>
-#include <plat/mux.h>
 
 #include "mux.h"
 
 void __init omap2_i2c_mux_pins(int bus_id)
 {
-	if (cpu_is_omap24xx()) {
-		const int omap24xx_pins[][2] = {
-			{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
-			{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
-		};
-		int scl, sda;
-
-		scl = omap24xx_pins[bus_id - 1][0];
-		sda = omap24xx_pins[bus_id - 1][1];
-		omap_cfg_reg(sda);
-		omap_cfg_reg(scl);
-	}
+	char mux_name[sizeof("i2c2_scl.i2c2_scl")];
 
 	/* First I2C bus is not muxable */
-	if (cpu_is_omap34xx() && bus_id > 1) {
-		char mux_name[sizeof("i2c2_scl.i2c2_scl")];
+	if (bus_id == 1)
+		return;
 
-		sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
-		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-		sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
-		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
-	}
+	sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
+	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+	sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
+	omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
 }

arch/arm/mach-omap2/id.c

@@ -25,6 +25,8 @@
 #include <plat/control.h>
 #include <plat/cpu.h>
 
+#include <mach/id.h>
+
 static struct omap_chip_id omap_chip;
 static unsigned int omap_revision;
 
@@ -102,30 +104,36 @@ static struct omap_id omap_ids[] __initdata = {
 static void __iomem *tap_base;
 static u16 tap_prod_id;
 
-void __init omap24xx_check_revision(void)
+void omap_get_die_id(struct omap_die_id *odi)
+{
+	odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_0);
+	odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_1);
+	odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_2);
+	odi->id_3 = read_tap_reg(OMAP_TAP_DIE_ID_3);
+}
+
+static void __init omap24xx_check_revision(void)
 {
 	int i, j;
 	u32 idcode, prod_id;
 	u16 hawkeye;
 	u8  dev_type, rev;
+	struct omap_die_id odi;
 
 	idcode = read_tap_reg(OMAP_TAP_IDCODE);
 	prod_id = read_tap_reg(tap_prod_id);
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0x0f;
 	dev_type = (prod_id >> 16) & 0x0f;
+	omap_get_die_id(&odi);
 
 	pr_debug("OMAP_TAP_IDCODE 0x%08x REV %i HAWKEYE 0x%04x MANF %03x\n",
 		 idcode, rev, hawkeye, (idcode >> 1) & 0x7ff);
-	pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_0));
+	pr_debug("OMAP_TAP_DIE_ID_0: 0x%08x\n", odi.id_0);
 	pr_debug("OMAP_TAP_DIE_ID_1: 0x%08x DEV_REV: %i\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_1),
-		 (read_tap_reg(OMAP_TAP_DIE_ID_1) >> 28) & 0xf);
-	pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_2));
-	pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n",
-		 read_tap_reg(OMAP_TAP_DIE_ID_3));
+		 odi.id_1, (odi.id_1 >> 28) & 0xf);
+	pr_debug("OMAP_TAP_DIE_ID_2: 0x%08x\n", odi.id_2);
+	pr_debug("OMAP_TAP_DIE_ID_3: 0x%08x\n", odi.id_3);
 	pr_debug("OMAP_TAP_PROD_ID_0: 0x%08x DEV_TYPE: %i\n",
 		 prod_id, dev_type);
 
@@ -164,7 +172,7 @@ void __init omap24xx_check_revision(void)
 		omap3_features |= OMAP3_HAS_ ##feat;			\
 	}
 
-void __init omap3_check_features(void)
+static void __init omap3_check_features(void)
 {
 	u32 status;
 
@@ -179,6 +187,8 @@ void __init omap3_check_features(void)
 	OMAP3_CHECK_FEATURE(status, ISP);
 	if (cpu_is_omap3630())
 		omap3_features |= OMAP3_HAS_192MHZ_CLK;
+	if (!cpu_is_omap3505() && !cpu_is_omap3517())
+		omap3_features |= OMAP3_HAS_IO_WAKEUP;
 
 	/*
 	 * TODO: Get additional info (where applicable)
@@ -186,7 +196,7 @@ void __init omap3_check_features(void)
 	 */
 }
 
-void __init omap3_check_revision(void)
+static void __init omap3_check_revision(void)
 {
 	u32 cpuid, idcode;
 	u16 hawkeye;
@@ -259,15 +269,31 @@ void __init omap3_check_revision(void)
 		omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 		break;
 	case 0xb891:
-	/* FALLTHROUGH */
+		/* Handle 36xx devices */
+		omap_chip.oc |= CHIP_IS_OMAP3630ES1;
+
+		switch(rev) {
+		case 0: /* Take care of early samples */
+			omap_revision = OMAP3630_REV_ES1_0;
+			break;
+		case 1:
+			omap_revision = OMAP3630_REV_ES1_1;
+			omap_chip.oc |= CHIP_IS_OMAP3630ES1_1;
+			break;
+		case 2:
+		default:
+			omap_revision =  OMAP3630_REV_ES1_2;
+			omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
+			break;
+		}
 	default:
 		/* Unknown default to latest silicon rev as default*/
-		omap_revision = OMAP3630_REV_ES1_0;
-		omap_chip.oc |= CHIP_IS_OMAP3630ES1;
+		omap_revision =  OMAP3630_REV_ES1_2;
+		omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
 	}
 }
 
-void __init omap4_check_revision(void)
+static void __init omap4_check_revision(void)
 {
 	u32 idcode;
 	u16 hawkeye;
@@ -297,7 +323,7 @@ void __init omap4_check_revision(void)
 	if (omap3_has_ ##feat())		\
 		printk(#feat" ");
 
-void __init omap3_cpuinfo(void)
+static void __init omap3_cpuinfo(void)
 {
 	u8 rev = GET_OMAP_REVISION();
 	char cpu_name[16], cpu_rev[16];
@@ -339,6 +365,12 @@ void __init omap3_cpuinfo(void)
 	case OMAP_REVBITS_00:
 		strcpy(cpu_rev, "1.0");
 		break;
+	case OMAP_REVBITS_01:
+		strcpy(cpu_rev, "1.1");
+		break;
+	case OMAP_REVBITS_02:
+		strcpy(cpu_rev, "1.2");
+		break;
 	case OMAP_REVBITS_10:
 		strcpy(cpu_rev, "2.0");
 		break;

arch/arm/mach-omap2/include/mach/board-sdp.h → arch/arm/mach-omap2/include/mach/board-flash.h

@@ -12,10 +12,17 @@
  */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <plat/gpmc.h>
+
+#define PDC_NOR		1
+#define PDC_NAND	2
+#define PDC_ONENAND	3
+#define DBG_MPDB	4
 
 struct flash_partitions {
 	struct mtd_partition *parts;
 	int nr_parts;
 };
 
-extern void sdp_flash_init(struct flash_partitions []);
+extern void board_flash_init(struct flash_partitions [],
+				char chip_sel[][GPMC_CS_NUM]);

arch/arm/mach-omap2/include/mach/board-zoom.h

@@ -1,5 +1,11 @@
 /*
  * Defines for zoom boards
  */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define ZOOM_NAND_CS    0
+
+extern void __init board_nand_init(struct mtd_partition *, u8 nr_parts, u8 cs);
 extern int __init zoom_debugboard_init(void);
 extern void __init zoom_peripherals_init(void);

arch/arm/mach-omap2/include/mach/debug-macro.S

@@ -36,7 +36,7 @@ omap_uart_lsr:	.word	0
 		/* Use omap_uart_phys/virt if already configured */
 10:		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =omap_uart_phys	@ physical base address
+		ldreq	\rx, =__virt_to_phys(omap_uart_phys)	@ physical base address
 		ldrne	\rx, =omap_uart_virt	@ virtual base address
 		ldr	\rx, [\rx, #0]
 		cmp	\rx, #0			@ is port configured?
@@ -89,26 +89,36 @@ omap_uart_lsr:	.word	0
 44:		mov	\rx, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
 95:		ldr	\rx, =ZOOM_UART_BASE
-		ldr	\tmp, =omap_uart_phys
+		mrc	p15, 0, \tmp, c1, c0
+		tst	\tmp, #1		@ MMU enabled?
+		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
+		ldrne	\tmp, =omap_uart_phys
 		str	\rx, [\tmp, #0]
 		ldr	\rx, =ZOOM_UART_VIRT
-		ldr	\tmp, =omap_uart_virt
+		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
+		ldrne	\tmp, =omap_uart_virt
 		str	\rx, [\tmp, #0]
 		mov	\rx, #(UART_LSR << ZOOM_PORT_SHIFT)
-		ldr	\tmp, =omap_uart_lsr
+		ldreq	\tmp, =__virt_to_phys(omap_uart_lsr)
+		ldrne	\tmp, =omap_uart_lsr
 		str	\rx, [\tmp, #0]
 		b	10b
 
 		/* Store both phys and virt address for the uart */
 98:		add	\rx, \rx, #0x48000000	@ phys base
-		ldr	\tmp, =omap_uart_phys
+		mrc	p15, 0, \tmp, c1, c0
+		tst	\tmp, #1		@ MMU enabled?
+		ldreq	\tmp, =__virt_to_phys(omap_uart_phys)
+		ldrne	\tmp, =omap_uart_phys
 		str	\rx, [\tmp, #0]
 		sub	\rx, \rx, #0x48000000	@ phys base
 		add	\rx, \rx, #0xfa000000	@ virt base
-		ldr	\tmp, =omap_uart_virt
+		ldreq	\tmp, =__virt_to_phys(omap_uart_virt)
+		ldrne	\tmp, =omap_uart_virt
 		str	\rx, [\tmp, #0]
 		mov	\rx, #(UART_LSR << OMAP_PORT_SHIFT)
-		ldr	\tmp, =omap_uart_lsr
+		ldreq	\tmp, =__virt_to_phys(omap_uart_lsr)
+		ldrne	\tmp, =omap_uart_lsr
 		str	\rx, [\tmp, #0]
 
 		b	10b
@@ -120,7 +130,10 @@ omap_uart_lsr:	.word	0
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		ldr	\rd, =omap_uart_lsr
+1001:		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1		@ MMU enabled?
+		ldreq	\rd, =__virt_to_phys(omap_uart_lsr)
+		ldrne	\rd, =omap_uart_lsr
 		ldr	\rd, [\rd, #0]
 		ldrb	\rd, [\rx, \rd]
 		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)

arch/arm/mach-omap2/include/mach/id.h

@@ -0,0 +1,22 @@
+/*
+ * OMAP2 CPU identification code
+ *
+ * Copyright (C) 2010 Kan-Ru Chen <kanru@0xlab.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP2_ARCH_ID_H
+#define OMAP2_ARCH_ID_H
+
+struct omap_die_id {
+	u32 id_0;
+	u32 id_1;
+	u32 id_2;
+	u32 id_3;
+};
+
+void omap_get_die_id(struct omap_die_id *odi);
+
+#endif

arch/arm/mach-omap2/include/mach/omap4-common.h

@@ -13,6 +13,13 @@
 #ifndef OMAP_ARCH_OMAP4_COMMON_H
 #define OMAP_ARCH_OMAP4_COMMON_H
 
+/*
+ * wfi used in low power code. Directly opcode is used instead
+ * of instruction to avoid mulit-omap build break
+ */
+#define do_wfi()			\
+		__asm__ __volatile__ (".word	0xe320f003" : : : "memory")
+
 #ifdef CONFIG_CACHE_L2X0
 extern void __iomem *l2cache_base;
 #endif

arch/arm/mach-omap2/io.c

@@ -28,7 +28,6 @@
 
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
 #include <plat/sram.h>
 #include <plat/sdrc.h>
 #include <plat/gpmc.h>
@@ -44,6 +43,7 @@
 
 #include <plat/clockdomain.h>
 #include "clockdomains.h"
+
 #include <plat/omap_hwmod.h>
 
 /*
@@ -313,6 +313,8 @@ static int __init _omap2_init_reprogram_sdrc(void)
 void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 				 struct omap_sdrc_params *sdrc_cs1)
 {
+	u8 skip_setup_idle = 0;
+
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_autodeps);
 	if (cpu_is_omap242x())
@@ -321,7 +323,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		omap2430_hwmod_init();
 	else if (cpu_is_omap34xx())
 		omap3xxx_hwmod_init();
-	omap2_mux_init();
 	/* The OPP tables have to be registered before a clk init */
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 
@@ -337,9 +338,13 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 		pr_err("Could not init clock framework - unknown CPU\n");
 
 	omap_serial_early_init();
+
+#ifndef CONFIG_PM_RUNTIME
+	skip_setup_idle = 1;
+#endif
 	if (cpu_is_omap24xx() || cpu_is_omap34xx())   /* FIXME: OMAP4 */
-		omap_hwmod_late_init();
-	omap_pm_if_init();
+		omap_hwmod_late_init(skip_setup_idle);
+
 	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();

arch/arm/mach-omap2/iommu2.c

@@ -44,9 +44,13 @@
 #define MMU_IRQ_EMUMISS		(1 << 2)
 #define MMU_IRQ_TRANSLATIONFAULT	(1 << 1)
 #define MMU_IRQ_TLBMISS		(1 << 0)
-#define MMU_IRQ_MASK	\
-	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
-	 MMU_IRQ_TRANSLATIONFAULT)
+
+#define __MMU_IRQ_FAULT		\
+	(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT)
+#define MMU_IRQ_MASK		\
+	(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS)
+#define MMU_IRQ_TWL_MASK	(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT)
+#define MMU_IRQ_TLB_MISS_MASK	(__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS)
 
 /* MMU_CNTL */
 #define MMU_CNTL_SHIFT		1
@@ -61,6 +65,26 @@
 	 ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 :	\
 	 ((pgsz) == MMU_CAM_PGSZ_4K)  ? 0xfffff000 : 0)
 
+
+static void __iommu_set_twl(struct iommu *obj, bool on)
+{
+	u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+	if (on)
+		iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE);
+	else
+		iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE);
+
+	l &= ~MMU_CNTL_MASK;
+	if (on)
+		l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+	else
+		l |= (MMU_CNTL_MMU_EN);
+
+	iommu_write_reg(obj, l, MMU_CNTL);
+}
+
+
 static int omap2_iommu_enable(struct iommu *obj)
 {
 	u32 l, pa;
@@ -96,13 +120,9 @@ static int omap2_iommu_enable(struct iommu *obj)
 	l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
 	iommu_write_reg(obj, l, MMU_SYSCONFIG);
 
-	iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
 	iommu_write_reg(obj, pa, MMU_TTB);
 
-	l = iommu_read_reg(obj, MMU_CNTL);
-	l &= ~MMU_CNTL_MASK;
-	l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
-	iommu_write_reg(obj, l, MMU_CNTL);
+	__iommu_set_twl(obj, true);
 
 	return 0;
 }
@@ -118,6 +138,11 @@ static void omap2_iommu_disable(struct iommu *obj)
 	dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
 }
 
+static void omap2_iommu_set_twl(struct iommu *obj, bool on)
+{
+	__iommu_set_twl(obj, false);
+}
+
 static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
 {
 	int i;
@@ -147,7 +172,7 @@ static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
 	printk("\n");
 
 	iommu_write_reg(obj, stat, MMU_IRQSTATUS);
-	omap2_iommu_disable(obj);
+
 	return stat;
 }
 
@@ -300,6 +325,7 @@ static const struct iommu_functions omap2_iommu_ops = {
 
 	.enable		= omap2_iommu_enable,
 	.disable	= omap2_iommu_disable,
+	.set_twl	= omap2_iommu_set_twl,
 	.fault_isr	= omap2_iommu_fault_isr,
 
 	.tlb_read_cr	= omap2_tlb_read_cr,

arch/arm/mach-omap2/mailbox.c

@@ -10,7 +10,6 @@
  * for more details.
  */
 
-#include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -18,8 +17,6 @@
 #include <plat/mailbox.h>
 #include <mach/irqs.h>
 
-#define DRV_NAME "omap2-mailbox"
-
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_SYSCONFIG		0x010
 #define MAILBOX_SYSSTATUS		0x014
@@ -131,7 +128,7 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 	}
 
 	l = mbox_read_reg(MAILBOX_REVISION);
-	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
+	pr_debug("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
 
 	if (cpu_is_omap44xx())
 		l = OMAP4_SMARTIDLE;
@@ -283,6 +280,8 @@ static struct omap_mbox_ops omap2_mbox_ops = {
  */
 
 /* FIXME: the following structs should be filled automatically by the user id */
+
+#if defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_ARCH_OMAP2420)
 /* DSP */
 static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.tx_fifo = {
@@ -300,10 +299,46 @@ static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.irqdisable	= MAILBOX_IRQENABLE(0),
 };
 
+struct omap_mbox mbox_dsp_info = {
+	.name	= "dsp",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_dsp_priv,
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3430)
+struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL };
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2420)
+/* IVA */
+static struct omap_mbox2_priv omap2_mbox_iva_priv = {
+	.tx_fifo = {
+		.msg		= MAILBOX_MESSAGE(2),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(2),
+	},
+	.rx_fifo = {
+		.msg		= MAILBOX_MESSAGE(3),
+		.msg_stat	= MAILBOX_MSGSTATUS(3),
+	},
+	.irqenable	= MAILBOX_IRQENABLE(3),
+	.irqstatus	= MAILBOX_IRQSTATUS(3),
+	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
+	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
+	.irqdisable	= MAILBOX_IRQENABLE(3),
+};
+
+static struct omap_mbox mbox_iva_info = {
+	.name	= "iva",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_iva_priv,
+};
 
+struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL };
+#endif
 
-/* OMAP4 specific data structure. Use the cpu_is_omap4xxx()
-to use this*/
+#if defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 */
 static struct omap_mbox2_priv omap2_mbox_1_priv = {
 	.tx_fifo = {
 		.msg		= MAILBOX_MESSAGE(0),
@@ -325,14 +360,6 @@ struct omap_mbox mbox_1_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_1_priv,
 };
-EXPORT_SYMBOL(mbox_1_info);
-
-struct omap_mbox mbox_dsp_info = {
-	.name	= "dsp",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_dsp_priv,
-};
-EXPORT_SYMBOL(mbox_dsp_info);
 
 static struct omap_mbox2_priv omap2_mbox_2_priv = {
 	.tx_fifo = {
@@ -355,110 +382,64 @@ struct omap_mbox mbox_2_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_2_priv,
 };
-EXPORT_SYMBOL(mbox_2_info);
-
-
-#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
-static struct omap_mbox2_priv omap2_mbox_iva_priv = {
-	.tx_fifo = {
-		.msg		= MAILBOX_MESSAGE(2),
-		.fifo_stat	= MAILBOX_FIFOSTATUS(2),
-	},
-	.rx_fifo = {
-		.msg		= MAILBOX_MESSAGE(3),
-		.msg_stat	= MAILBOX_MSGSTATUS(3),
-	},
-	.irqenable	= MAILBOX_IRQENABLE(3),
-	.irqstatus	= MAILBOX_IRQSTATUS(3),
-	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
-	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
-	.irqdisable	= MAILBOX_IRQENABLE(3),
-};
 
-static struct omap_mbox mbox_iva_info = {
-	.name	= "iva",
-	.ops	= &omap2_mbox_ops,
-	.priv	= &omap2_mbox_iva_priv,
-};
+struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
 #endif
 
 static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 {
-	struct resource *res;
+	struct resource *mem;
 	int ret;
+	struct omap_mbox **list;
 
-	/* MBOX base */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid mem resource\n");
-		return -ENODEV;
+	if (false)
+		;
+#if defined(CONFIG_ARCH_OMAP3430)
+	else if (cpu_is_omap3430()) {
+		list = omap3_mboxes;
+
+		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
 	}
-	mbox_base = ioremap(res->start, resource_size(res));
-	if (!mbox_base)
-		return -ENOMEM;
+#endif
+#if defined(CONFIG_ARCH_OMAP2420)
+	else if (cpu_is_omap2420()) {
+		list = omap2_mboxes;
 
-	/* DSP or IVA2 IRQ */
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
+		list[1]->irq = platform_get_irq_byname(pdev, "iva");
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	else if (cpu_is_omap44xx()) {
+		list = omap4_mboxes;
 
-	if (unlikely(!res)) {
-		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
-		goto err_dsp;
+		list[0]->irq = list[1]->irq =
+			platform_get_irq_byname(pdev, "mbox");
 	}
-	if (cpu_is_omap44xx()) {
-		mbox_1_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_1_info);
-	} else {
-		mbox_dsp_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+#endif
+	else {
+		pr_err("%s: platform not supported\n", __func__);
+		return -ENODEV;
 	}
-	if (ret)
-		goto err_dsp;
 
-	if (cpu_is_omap44xx()) {
-		mbox_2_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_2_info);
-		if (ret) {
-			omap_mbox_unregister(&mbox_1_info);
-			goto err_dsp;
-		}
-	}
-#if defined(CONFIG_ARCH_OMAP2420) /* IVA */
-	if (cpu_is_omap2420()) {
-		/* IVA IRQ */
-		res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
-		if (unlikely(!res)) {
-			dev_err(&pdev->dev, "invalid irq resource\n");
-			ret = -ENODEV;
-			omap_mbox_unregister(&mbox_dsp_info);
-			goto err_dsp;
-		}
-		mbox_iva_info.irq = res->start;
-		ret = omap_mbox_register(&pdev->dev, &mbox_iva_info);
-		if (ret) {
-			omap_mbox_unregister(&mbox_dsp_info);
-			goto err_dsp;
-		}
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	mbox_base = ioremap(mem->start, resource_size(mem));
+	if (!mbox_base)
+		return -ENOMEM;
+
+	ret = omap_mbox_register(&pdev->dev, list);
+	if (ret) {
+		iounmap(mbox_base);
+		return ret;
 	}
-#endif
 	return 0;
 
-err_dsp:
-	iounmap(mbox_base);
 	return ret;
 }
 
 static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 {
-#if defined(CONFIG_ARCH_OMAP2420)
-	omap_mbox_unregister(&mbox_iva_info);
-#endif
-
-	if (cpu_is_omap44xx()) {
-		omap_mbox_unregister(&mbox_2_info);
-		omap_mbox_unregister(&mbox_1_info);
-	} else
-		omap_mbox_unregister(&mbox_dsp_info);
+	omap_mbox_unregister();
 	iounmap(mbox_base);
 	return 0;
 }
@@ -467,7 +448,7 @@ static struct platform_driver omap2_mbox_driver = {
 	.probe = omap2_mbox_probe,
 	.remove = __devexit_p(omap2_mbox_remove),
 	.driver = {
-		.name = DRV_NAME,
+		.name = "omap-mailbox",
 	},
 };
 
@@ -486,5 +467,6 @@ module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
-MODULE_ALIAS("platform:"DRV_NAME);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_AUTHOR("Paul Mundt");
+MODULE_ALIAS("platform:omap2-mailbox");

arch/arm/mach-omap2/mcbsp.c

@@ -20,17 +20,18 @@
 
 #include <mach/irqs.h>
 #include <plat/dma.h>
-#include <plat/mux.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
 
+#include "mux.h"
+
 static void omap2_mcbsp2_mux_setup(void)
 {
-	omap_cfg_reg(Y15_24XX_MCBSP2_CLKX);
-	omap_cfg_reg(R14_24XX_MCBSP2_FSX);
-	omap_cfg_reg(W15_24XX_MCBSP2_DR);
-	omap_cfg_reg(V15_24XX_MCBSP2_DX);
-	omap_cfg_reg(V14_24XX_GPIO117);
+	omap_mux_init_signal("eac_ac_sclk.mcbsp2_clkx", OMAP_PULL_ENA);
+	omap_mux_init_signal("eac_ac_fs.mcbsp2_fsx", OMAP_PULL_ENA);
+	omap_mux_init_signal("eac_ac_din.mcbsp2_dr", OMAP_PULL_ENA);
+	omap_mux_init_signal("eac_ac_dout.mcbsp2_dx", OMAP_PULL_ENA);
+	omap_mux_init_gpio(117, OMAP_PULL_ENA);
 	/*
 	 * TODO: Need to add MUX settings for OMAP 2430 SDP
 	 */

arch/arm/mach-omap2/mux.c

@@ -37,12 +37,12 @@
 #include <asm/system.h>
 
 #include <plat/control.h>
-#include <plat/mux.h>
 
 #include "mux.h"
 
 #define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
 #define OMAP_MUX_BASE_SZ		0x5ca
+#define MUXABLE_GPIO_MODE3		BIT(0)
 
 struct omap_mux_entry {
 	struct omap_mux		mux;
@@ -51,6 +51,7 @@ struct omap_mux_entry {
 
 static unsigned long mux_phys;
 static void __iomem *mux_base;
+static u8 omap_mux_flags;
 
 u16 omap_mux_read(u16 reg)
 {
@@ -76,301 +77,6 @@ void omap_mux_write_array(struct omap_board_mux *board_mux)
 	}
 }
 
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
-
-static struct omap_mux_cfg arch_mux_cfg;
-
-/* NOTE: See mux.h for the enumeration */
-
-static struct pin_config __initdata_or_module omap24xx_pins[] = {
-/*
- *	description			mux	mux	pull	pull	debug
- *					offset	mode	ena	type
- */
-
-/* 24xx I2C */
-MUX_CFG_24XX("M19_24XX_I2C1_SCL",	0x111,	0,	0,	0,	1)
-MUX_CFG_24XX("L15_24XX_I2C1_SDA",	0x112,	0,	0,	0,	1)
-MUX_CFG_24XX("J15_24XX_I2C2_SCL",	0x113,	0,	0,	1,	1)
-MUX_CFG_24XX("H19_24XX_I2C2_SDA",	0x114,	0,	0,	0,	1)
-
-/* Menelaus interrupt */
-MUX_CFG_24XX("W19_24XX_SYS_NIRQ",	0x12c,	0,	1,	1,	1)
-
-/* 24xx clocks */
-MUX_CFG_24XX("W14_24XX_SYS_CLKOUT",	0x137,	0,	1,	1,	1)
-
-/* 24xx GPMC chipselects, wait pin monitoring */
-MUX_CFG_24XX("E2_GPMC_NCS2",		0x08e,	0,	1,	1,	1)
-MUX_CFG_24XX("L2_GPMC_NCS7",		0x093,	0,	1,	1,	1)
-MUX_CFG_24XX("L3_GPMC_WAIT0",		0x09a,	0,	1,	1,	1)
-MUX_CFG_24XX("N7_GPMC_WAIT1",		0x09b,	0,	1,	1,	1)
-MUX_CFG_24XX("M1_GPMC_WAIT2",		0x09c,	0,	1,	1,	1)
-MUX_CFG_24XX("P1_GPMC_WAIT3",		0x09d,	0,	1,	1,	1)
-
-/* 24xx McBSP */
-MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX",	0x124,	1,	1,	0,	1)
-MUX_CFG_24XX("R14_24XX_MCBSP2_FSX",	0x125,	1,	1,	0,	1)
-MUX_CFG_24XX("W15_24XX_MCBSP2_DR",	0x126,	1,	1,	0,	1)
-MUX_CFG_24XX("V15_24XX_MCBSP2_DX",	0x127,	1,	1,	0,	1)
-
-/* 24xx GPIO */
-MUX_CFG_24XX("M21_242X_GPIO11",		0x0c9,	3,	1,	1,	1)
-MUX_CFG_24XX("P21_242X_GPIO12",		0x0ca,	3,	0,	0,	1)
-MUX_CFG_24XX("AA10_242X_GPIO13",	0x0e5,	3,	0,	0,	1)
-MUX_CFG_24XX("AA6_242X_GPIO14",		0x0e6,	3,	0,	0,	1)
-MUX_CFG_24XX("AA4_242X_GPIO15",		0x0e7,	3,	0,	0,	1)
-MUX_CFG_24XX("Y11_242X_GPIO16",		0x0e8,	3,	0,	0,	1)
-MUX_CFG_24XX("AA12_242X_GPIO17",	0x0e9,	3,	0,	0,	1)
-MUX_CFG_24XX("AA8_242X_GPIO58",		0x0ea,	3,	0,	0,	1)
-MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
-MUX_CFG_24XX("W4__24XX_GPIO74",		0x0f2,	3,	0,	0,	1)
-MUX_CFG_24XX("N15_24XX_GPIO85",		0x103,	3,	0,	0,	1)
-MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
-MUX_CFG_24XX("P20_24XX_GPIO93",		0x10b,	3,	0,	0,	1)
-MUX_CFG_24XX("P18_24XX_GPIO95",		0x10d,	3,	0,	0,	1)
-MUX_CFG_24XX("M18_24XX_GPIO96",		0x10e,	3,	0,	0,	1)
-MUX_CFG_24XX("L14_24XX_GPIO97",		0x10f,	3,	0,	0,	1)
-MUX_CFG_24XX("J15_24XX_GPIO99",		0x113,	3,	1,	1,	1)
-MUX_CFG_24XX("V14_24XX_GPIO117",	0x128,	3,	1,	0,	1)
-MUX_CFG_24XX("P14_24XX_GPIO125",	0x140,	3,	1,	1,	1)
-
-/* 242x DBG GPIO */
-MUX_CFG_24XX("V4_242X_GPIO49",		0xd3,	3,	0,	0,	1)
-MUX_CFG_24XX("W2_242X_GPIO50",		0xd4,	3,	0,	0,	1)
-MUX_CFG_24XX("U4_242X_GPIO51",		0xd5,	3,	0,	0,	1)
-MUX_CFG_24XX("V3_242X_GPIO52",		0xd6,	3,	0,	0,	1)
-MUX_CFG_24XX("V2_242X_GPIO53",		0xd7,	3,	0,	0,	1)
-MUX_CFG_24XX("V6_242X_GPIO53",		0xcf,	3,	0,	0,	1)
-MUX_CFG_24XX("T4_242X_GPIO54",		0xd8,	3,	0,	0,	1)
-MUX_CFG_24XX("Y4_242X_GPIO54",		0xd0,	3,	0,	0,	1)
-MUX_CFG_24XX("T3_242X_GPIO55",		0xd9,	3,	0,	0,	1)
-MUX_CFG_24XX("U2_242X_GPIO56",		0xda,	3,	0,	0,	1)
-
-/* 24xx external DMA requests */
-MUX_CFG_24XX("AA10_242X_DMAREQ0",	0x0e5,	2,	0,	0,	1)
-MUX_CFG_24XX("AA6_242X_DMAREQ1",	0x0e6,	2,	0,	0,	1)
-MUX_CFG_24XX("E4_242X_DMAREQ2",		0x074,	2,	0,	0,	1)
-MUX_CFG_24XX("G4_242X_DMAREQ3",		0x073,	2,	0,	0,	1)
-MUX_CFG_24XX("D3_242X_DMAREQ4",		0x072,	2,	0,	0,	1)
-MUX_CFG_24XX("E3_242X_DMAREQ5",		0x071,	2,	0,	0,	1)
-
-/* UART3 */
-MUX_CFG_24XX("K15_24XX_UART3_TX",	0x118,	0,	0,	0,	1)
-MUX_CFG_24XX("K14_24XX_UART3_RX",	0x119,	0,	0,	0,	1)
-
-/* MMC/SDIO */
-MUX_CFG_24XX("G19_24XX_MMC_CLKO",	0x0f3,	0,	0,	0,	1)
-MUX_CFG_24XX("H18_24XX_MMC_CMD",	0x0f4,	0,	0,	0,	1)
-MUX_CFG_24XX("F20_24XX_MMC_DAT0",	0x0f5,	0,	0,	0,	1)
-MUX_CFG_24XX("H14_24XX_MMC_DAT1",	0x0f6,	0,	0,	0,	1)
-MUX_CFG_24XX("E19_24XX_MMC_DAT2",	0x0f7,	0,	0,	0,	1)
-MUX_CFG_24XX("D19_24XX_MMC_DAT3",	0x0f8,	0,	0,	0,	1)
-MUX_CFG_24XX("F19_24XX_MMC_DAT_DIR0",	0x0f9,	0,	0,	0,	1)
-MUX_CFG_24XX("E20_24XX_MMC_DAT_DIR1",	0x0fa,	0,	0,	0,	1)
-MUX_CFG_24XX("F18_24XX_MMC_DAT_DIR2",	0x0fb,	0,	0,	0,	1)
-MUX_CFG_24XX("E18_24XX_MMC_DAT_DIR3",	0x0fc,	0,	0,	0,	1)
-MUX_CFG_24XX("G18_24XX_MMC_CMD_DIR",	0x0fd,	0,	0,	0,	1)
-MUX_CFG_24XX("H15_24XX_MMC_CLKI",	0x0fe,	0,	0,	0,	1)
-
-/* Full speed USB */
-MUX_CFG_24XX("J20_24XX_USB0_PUEN",	0x11d,	0,	0,	0,	1)
-MUX_CFG_24XX("J19_24XX_USB0_VP",	0x11e,	0,	0,	0,	1)
-MUX_CFG_24XX("K20_24XX_USB0_VM",	0x11f,	0,	0,	0,	1)
-MUX_CFG_24XX("J18_24XX_USB0_RCV",	0x120,	0,	0,	0,	1)
-MUX_CFG_24XX("K19_24XX_USB0_TXEN",	0x121,	0,	0,	0,	1)
-MUX_CFG_24XX("J14_24XX_USB0_SE0",	0x122,	0,	0,	0,	1)
-MUX_CFG_24XX("K18_24XX_USB0_DAT",	0x123,	0,	0,	0,	1)
-
-MUX_CFG_24XX("N14_24XX_USB1_SE0",	0x0ed,	2,	0,	0,	1)
-MUX_CFG_24XX("W12_24XX_USB1_SE0",	0x0dd,	3,	0,	0,	1)
-MUX_CFG_24XX("P15_24XX_USB1_DAT",	0x0ee,	2,	0,	0,	1)
-MUX_CFG_24XX("R13_24XX_USB1_DAT",	0x0e0,	3,	0,	0,	1)
-MUX_CFG_24XX("W20_24XX_USB1_TXEN",	0x0ec,	2,	0,	0,	1)
-MUX_CFG_24XX("P13_24XX_USB1_TXEN",	0x0df,	3,	0,	0,	1)
-MUX_CFG_24XX("V19_24XX_USB1_RCV",	0x0eb,	2,	0,	0,	1)
-MUX_CFG_24XX("V12_24XX_USB1_RCV",	0x0de,	3,	0,	0,	1)
-
-MUX_CFG_24XX("AA10_24XX_USB2_SE0",	0x0e5,	2,	0,	0,	1)
-MUX_CFG_24XX("Y11_24XX_USB2_DAT",	0x0e8,	2,	0,	0,	1)
-MUX_CFG_24XX("AA12_24XX_USB2_TXEN",	0x0e9,	2,	0,	0,	1)
-MUX_CFG_24XX("AA6_24XX_USB2_RCV",	0x0e6,	2,	0,	0,	1)
-MUX_CFG_24XX("AA4_24XX_USB2_TLLSE0",	0x0e7,	2,	0,	0,	1)
-
-/* Keypad GPIO*/
-MUX_CFG_24XX("T19_24XX_KBR0",		0x106,	3,	1,	1,	1)
-MUX_CFG_24XX("R19_24XX_KBR1",		0x107,	3,	1,	1,	1)
-MUX_CFG_24XX("V18_24XX_KBR2",		0x139,	3,	1,	1,	1)
-MUX_CFG_24XX("M21_24XX_KBR3",		0xc9,	3,	1,	1,	1)
-MUX_CFG_24XX("E5__24XX_KBR4",		0x138,	3,	1,	1,	1)
-MUX_CFG_24XX("M18_24XX_KBR5",		0x10e,	3,	1,	1,	1)
-MUX_CFG_24XX("R20_24XX_KBC0",		0x108,	3,	0,	0,	1)
-MUX_CFG_24XX("M14_24XX_KBC1",		0x109,	3,	0,	0,	1)
-MUX_CFG_24XX("H19_24XX_KBC2",		0x114,	3,	0,	0,	1)
-MUX_CFG_24XX("V17_24XX_KBC3",		0x135,	3,	0,	0,	1)
-MUX_CFG_24XX("P21_24XX_KBC4",		0xca,	3,	0,	0,	1)
-MUX_CFG_24XX("L14_24XX_KBC5",		0x10f,	3,	0,	0,	1)
-MUX_CFG_24XX("N19_24XX_KBC6",		0x110,	3,	0,	0,	1)
-
-/* 24xx Menelaus Keypad GPIO */
-MUX_CFG_24XX("B3__24XX_KBR5",		0x30,	3,	1,	1,	1)
-MUX_CFG_24XX("AA4_24XX_KBC2",		0xe7,	3,	0,	0,	1)
-MUX_CFG_24XX("B13_24XX_KBC6",		0x110,	3,	0,	0,	1)
-
-/* 2430 USB */
-MUX_CFG_24XX("AD9_2430_USB0_PUEN",	0x133,	4,	0,	0,	1)
-MUX_CFG_24XX("Y11_2430_USB0_VP",	0x134,	4,	0,	0,	1)
-MUX_CFG_24XX("AD7_2430_USB0_VM",	0x135,	4,	0,	0,	1)
-MUX_CFG_24XX("AE7_2430_USB0_RCV",	0x136,	4,	0,	0,	1)
-MUX_CFG_24XX("AD4_2430_USB0_TXEN",	0x137,	4,	0,	0,	1)
-MUX_CFG_24XX("AF9_2430_USB0_SE0",	0x138,	4,	0,	0,	1)
-MUX_CFG_24XX("AE6_2430_USB0_DAT",	0x139,	4,	0,	0,	1)
-MUX_CFG_24XX("AD24_2430_USB1_SE0",	0x107,	2,	0,	0,	1)
-MUX_CFG_24XX("AB24_2430_USB1_RCV",	0x108,	2,	0,	0,	1)
-MUX_CFG_24XX("Y25_2430_USB1_TXEN",	0x109,	2,	0,	0,	1)
-MUX_CFG_24XX("AA26_2430_USB1_DAT",	0x10A,	2,	0,	0,	1)
-
-/* 2430 HS-USB */
-MUX_CFG_24XX("AD9_2430_USB0HS_DATA3",	0x133,	0,	0,	0,	1)
-MUX_CFG_24XX("Y11_2430_USB0HS_DATA4",	0x134,	0,	0,	0,	1)
-MUX_CFG_24XX("AD7_2430_USB0HS_DATA5",	0x135,	0,	0,	0,	1)
-MUX_CFG_24XX("AE7_2430_USB0HS_DATA6",	0x136,	0,	0,	0,	1)
-MUX_CFG_24XX("AD4_2430_USB0HS_DATA2",	0x137,	0,	0,	0,	1)
-MUX_CFG_24XX("AF9_2430_USB0HS_DATA0",	0x138,	0,	0,	0,	1)
-MUX_CFG_24XX("AE6_2430_USB0HS_DATA1",	0x139,	0,	0,	0,	1)
-MUX_CFG_24XX("AE8_2430_USB0HS_CLK",	0x13A,	0,	0,	0,	1)
-MUX_CFG_24XX("AD8_2430_USB0HS_DIR",	0x13B,	0,	0,	0,	1)
-MUX_CFG_24XX("AE5_2430_USB0HS_STP",	0x13c,	0,	1,	1,	1)
-MUX_CFG_24XX("AE9_2430_USB0HS_NXT",	0x13D,	0,	0,	0,	1)
-MUX_CFG_24XX("AC7_2430_USB0HS_DATA7",	0x13E,	0,	0,	0,	1)
-
-/* 2430 McBSP */
-MUX_CFG_24XX("AD6_2430_MCBSP_CLKS",	0x011E,	0,	0,	0,	1)
-
-MUX_CFG_24XX("AB2_2430_MCBSP1_CLKR",	0x011A,	0,	0,	0,	1)
-MUX_CFG_24XX("AD5_2430_MCBSP1_FSR",	0x011B,	0,	0,	0,	1)
-MUX_CFG_24XX("AA1_2430_MCBSP1_DX",	0x011C,	0,	0,	0,	1)
-MUX_CFG_24XX("AF3_2430_MCBSP1_DR",	0x011D,	0,	0,	0,	1)
-MUX_CFG_24XX("AB3_2430_MCBSP1_FSX",	0x011F,	0,	0,	0,	1)
-MUX_CFG_24XX("Y9_2430_MCBSP1_CLKX",	0x0120,	0,	0,	0,	1)
-
-MUX_CFG_24XX("AC10_2430_MCBSP2_FSX",	0x012E,	1,	0,	0,	1)
-MUX_CFG_24XX("AD16_2430_MCBSP2_CLX",	0x012F,	1,	0,	0,	1)
-MUX_CFG_24XX("AE13_2430_MCBSP2_DX",	0x0130,	1,	0,	0,	1)
-MUX_CFG_24XX("AD13_2430_MCBSP2_DR",	0x0131,	1,	0,	0,	1)
-MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E,	0,	0,	0,	1)
-MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F,	0,	0,	0,	1)
-MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF",	0x0130,	0,	0,	0,	1)
-MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF",	0x0131,	0,	0,	0,	1)
-
-MUX_CFG_24XX("AC9_2430_MCBSP3_CLKX",	0x0103,	0,	0,	0,	1)
-MUX_CFG_24XX("AE4_2430_MCBSP3_FSX",	0x0104,	0,	0,	0,	1)
-MUX_CFG_24XX("AE2_2430_MCBSP3_DR",	0x0105,	0,	0,	0,	1)
-MUX_CFG_24XX("AF4_2430_MCBSP3_DX",	0x0106,	0,	0,	0,	1)
-
-MUX_CFG_24XX("N3_2430_MCBSP4_CLKX",	0x010B,	1,	0,	0,	1)
-MUX_CFG_24XX("AD23_2430_MCBSP4_DR",	0x010C,	1,	0,	0,	1)
-MUX_CFG_24XX("AB25_2430_MCBSP4_DX",	0x010D,	1,	0,	0,	1)
-MUX_CFG_24XX("AC25_2430_MCBSP4_FSX",	0x010E,	1,	0,	0,	1)
-
-MUX_CFG_24XX("AE16_2430_MCBSP5_CLKX",	0x00ED,	1,	0,	0,	1)
-MUX_CFG_24XX("AF12_2430_MCBSP5_FSX",	0x00ED,	1,	0,	0,	1)
-MUX_CFG_24XX("K7_2430_MCBSP5_DX",	0x00EF,	1,	0,	0,	1)
-MUX_CFG_24XX("M1_2430_MCBSP5_DR",	0x00F0,	1,	0,	0,	1)
-
-/* 2430 MCSPI1 */
-MUX_CFG_24XX("Y18_2430_MCSPI1_CLK",	0x010F,	0,	0,	0,	1)
-MUX_CFG_24XX("AD15_2430_MCSPI1_SIMO",	0x0110,	0,	0,	0,	1)
-MUX_CFG_24XX("AE17_2430_MCSPI1_SOMI",	0x0111,	0,	0,	0,	1)
-MUX_CFG_24XX("U1_2430_MCSPI1_CS0",	0x0112,	0,	0,	0,	1)
-
-/* Touchscreen GPIO */
-MUX_CFG_24XX("AF19_2430_GPIO_85",	0x0113,	3,	0,	0,	1)
-
-};
-
-#define OMAP24XX_PINS_SZ	ARRAY_SIZE(omap24xx_pins)
-
-#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-
-static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
-{
-	u16 orig;
-	u8 warn = 0, debug = 0;
-
-	orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-	debug = cfg->debug;
-#endif
-	warn = (orig != reg);
-	if (debug || warn)
-		printk(KERN_WARNING
-			"MUX: setup %s (0x%p): 0x%04x -> 0x%04x\n",
-			cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
-			orig, reg);
-}
-#else
-#define omap2_cfg_debug(x, y)	do {} while (0)
-#endif
-
-static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
-{
-	static DEFINE_SPINLOCK(mux_spin_lock);
-	unsigned long flags;
-	u8 reg = 0;
-
-	spin_lock_irqsave(&mux_spin_lock, flags);
-	reg |= cfg->mask & 0x7;
-	if (cfg->pull_val)
-		reg |= OMAP2_PULL_ENA;
-	if (cfg->pu_pd_val)
-		reg |= OMAP2_PULL_UP;
-	omap2_cfg_debug(cfg, reg);
-	omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
-	spin_unlock_irqrestore(&mux_spin_lock, flags);
-
-	return 0;
-}
-
-int __init omap2_mux_init(void)
-{
-	u32 mux_pbase;
-
-	if (cpu_is_omap2420())
-		mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
-	else if (cpu_is_omap2430())
-		mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
-	else
-		return -ENODEV;
-
-	mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
-	if (!mux_base) {
-		printk(KERN_ERR "mux: Could not ioremap\n");
-		return -ENODEV;
-	}
-
-	if (cpu_is_omap24xx()) {
-		arch_mux_cfg.pins	= omap24xx_pins;
-		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
-
-		return omap_mux_register(&arch_mux_cfg);
-	}
-
-	return 0;
-}
-
-#else
-int __init omap2_mux_init(void)
-{
-	return 0;
-}
-#endif	/* CONFIG_OMAP_MUX */
-
-/*----------------------------------------------------------------------------*/
-
-#ifdef CONFIG_ARCH_OMAP3
 static LIST_HEAD(muxmodes);
 static DEFINE_MUTEX(muxmode_mutex);
 
@@ -381,6 +87,9 @@ static char *omap_mux_options;
 int __init omap_mux_init_gpio(int gpio, int val)
 {
 	struct omap_mux_entry *e;
+	struct omap_mux *gpio_mux;
+	u16 old_mode;
+	u16 mux_mode;
 	int found = 0;
 
 	if (!gpio)
@@ -389,31 +98,33 @@ int __init omap_mux_init_gpio(int gpio, int val)
 	list_for_each_entry(e, &muxmodes, node) {
 		struct omap_mux *m = &e->mux;
 		if (gpio == m->gpio) {
-			u16 old_mode;
-			u16 mux_mode;
-
-			old_mode = omap_mux_read(m->reg_offset);
-			mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
-			mux_mode |= OMAP_MUX_MODE4;
-			printk(KERN_DEBUG "mux: Setting signal "
-				"%s.gpio%i 0x%04x -> 0x%04x\n",
-				m->muxnames[0], gpio, old_mode, mux_mode);
-			omap_mux_write(mux_mode, m->reg_offset);
+			gpio_mux = m;
 			found++;
 		}
 	}
 
-	if (found == 1)
-		return 0;
+	if (found == 0) {
+		printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+		return -ENODEV;
+	}
 
 	if (found > 1) {
-		printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);
+		printk(KERN_INFO "mux: Multiple gpio paths (%d) for gpio%i\n",
+				found, gpio);
 		return -EINVAL;
 	}
 
-	printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+	old_mode = omap_mux_read(gpio_mux->reg_offset);
+	mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
+	if (omap_mux_flags & MUXABLE_GPIO_MODE3)
+		mux_mode |= OMAP_MUX_MODE3;
+	else
+		mux_mode |= OMAP_MUX_MODE4;
+	printk(KERN_DEBUG "mux: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n",
+			gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
+	omap_mux_write(mux_mode, gpio_mux->reg_offset);
 
-	return -ENODEV;
+	return 0;
 }
 
 int __init omap_mux_init_signal(char *muxname, int val)
@@ -1032,6 +743,9 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 		return -ENODEV;
 	}
 
+	if (cpu_is_omap24xx())
+		omap_mux_flags = MUXABLE_GPIO_MODE3;
+
 	omap_mux_init_package(superset, package_subset, package_balls);
 	omap_mux_init_list(superset);
 	omap_mux_init_signals(board_mux);
@@ -1039,5 +753,3 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 	return 0;
 }
 
-#endif	/* CONFIG_ARCH_OMAP3 */
-

arch/arm/mach-omap2/mux.h

@@ -7,6 +7,8 @@
  * published by the Free Software Foundation.
  */
 
+#include "mux2420.h"
+#include "mux2430.h"
 #include "mux34xx.h"
 
 #define OMAP_MUX_TERMINATOR	0xffff
@@ -56,10 +58,12 @@
 
 /* Flags for omap_mux_init */
 #define OMAP_PACKAGE_MASK		0xffff
-#define OMAP_PACKAGE_CBP		4		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CUS		3		/* 423-pin 0.65 */
-#define OMAP_PACKAGE_CBB		2		/* 515-pin 0.40 0.50 */
-#define OMAP_PACKAGE_CBC		1		/* 515-pin 0.50 0.65 */
+#define OMAP_PACKAGE_CBP		6		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CUS		5		/* 423-pin 0.65 */
+#define OMAP_PACKAGE_CBB		4		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CBC		3		/* 515-pin 0.50 0.65 */
+#define OMAP_PACKAGE_ZAC		2		/* 24xx 447-pin POP */
+#define OMAP_PACKAGE_ZAF		1		/* 2420 447-pin SIP */
 
 
 #define OMAP_MUX_NR_MODES	8			/* Available modes */
@@ -102,7 +106,7 @@ struct omap_board_mux {
 	u16	value;
 };
 
-#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_OMAP_MUX)
 
 /**
  * omap_mux_init_gpio - initialize a signal based on the GPIO number
@@ -170,6 +174,20 @@ void omap_mux_write(u16 val, u16 mux_offset);
  */
 void omap_mux_write_array(struct omap_board_mux *board_mux);
 
+/**
+ * omap2420_mux_init() - initialize mux system with board specific set
+ * @board_mux:		Board specific mux table
+ * @flags:		OMAP package type used for the board
+ */
+int omap2420_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
+ * omap2430_mux_init() - initialize mux system with board specific set
+ * @board_mux:		Board specific mux table
+ * @flags:		OMAP package type used for the board
+ */
+int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);
+
 /**
  * omap3_mux_init() - initialize mux system with board specific set
  * @board_mux:		Board specific mux table

arch/arm/mach-omap2/mux2420.c

@@ -0,0 +1,688 @@
+/*
+ * Copyright (C) 2010 Nokia
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
+}
+
+#else
+
+#define _OMAP2420_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+}
+
+#endif
+
+#define _OMAP2420_BALLENTRY(M0, bb, bt)					\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.balls		= { bb, bt },					\
+}
+
+/*
+ * Superset of all mux modes for omap2420
+ */
+static struct omap_mux __initdata omap2420_muxmodes[] = {
+	_OMAP2420_MUXENTRY(CAM_D0, 54,
+		"cam_d0", "hw_dbg2", "sti_dout", "gpio_54",
+		NULL, NULL, "etk_d2", NULL),
+	_OMAP2420_MUXENTRY(CAM_D1, 53,
+		"cam_d1", "hw_dbg3", "sti_din", "gpio_53",
+		NULL, NULL, "etk_d3", NULL),
+	_OMAP2420_MUXENTRY(CAM_D2, 52,
+		"cam_d2", "hw_dbg4", "mcbsp1_clkx", "gpio_52",
+		NULL, NULL, "etk_d4", NULL),
+	_OMAP2420_MUXENTRY(CAM_D3, 51,
+		"cam_d3", "hw_dbg5", "mcbsp1_dr", "gpio_51",
+		NULL, NULL, "etk_d5", NULL),
+	_OMAP2420_MUXENTRY(CAM_D4, 50,
+		"cam_d4", "hw_dbg6", "mcbsp1_fsr", "gpio_50",
+		NULL, NULL, "etk_d6", NULL),
+	_OMAP2420_MUXENTRY(CAM_D5, 49,
+		"cam_d5", "hw_dbg7", "mcbsp1_clkr", "gpio_49",
+		NULL, NULL, "etk_d7", NULL),
+	_OMAP2420_MUXENTRY(CAM_D6, 0,
+		"cam_d6", "hw_dbg8", NULL, NULL,
+		NULL, NULL, "etk_d8", NULL),
+	_OMAP2420_MUXENTRY(CAM_D7, 0,
+		"cam_d7", "hw_dbg9", NULL, NULL,
+		NULL, NULL, "etk_d9", NULL),
+	_OMAP2420_MUXENTRY(CAM_D8, 54,
+		"cam_d8", "hw_dbg10", NULL, "gpio_54",
+		NULL, NULL, "etk_d10", NULL),
+	_OMAP2420_MUXENTRY(CAM_D9, 53,
+		"cam_d9", "hw_dbg11", NULL, "gpio_53",
+		NULL, NULL, "etk_d11", NULL),
+	_OMAP2420_MUXENTRY(CAM_HS, 55,
+		"cam_hs", "hw_dbg1", "mcbsp1_dx", "gpio_55",
+		NULL, NULL, "etk_d1", NULL),
+	_OMAP2420_MUXENTRY(CAM_LCLK, 57,
+		"cam_lclk", NULL, "mcbsp_clks", "gpio_57",
+		NULL, NULL, "etk_c1", NULL),
+	_OMAP2420_MUXENTRY(CAM_VS, 56,
+		"cam_vs", "hw_dbg0", "mcbsp1_fsx", "gpio_56",
+		NULL, NULL, "etk_d0", NULL),
+	_OMAP2420_MUXENTRY(CAM_XCLK, 0,
+		"cam_xclk", NULL, "sti_clk", NULL,
+		NULL, NULL, "etk_c2", NULL),
+	_OMAP2420_MUXENTRY(DSS_ACBIAS, 48,
+		"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA10, 40,
+		"dss_data10", NULL, NULL, "gpio_40",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA11, 41,
+		"dss_data11", NULL, NULL, "gpio_41",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA12, 42,
+		"dss_data12", NULL, NULL, "gpio_42",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA13, 43,
+		"dss_data13", NULL, NULL, "gpio_43",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA14, 44,
+		"dss_data14", NULL, NULL, "gpio_44",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA15, 45,
+		"dss_data15", NULL, NULL, "gpio_45",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA16, 46,
+		"dss_data16", NULL, NULL, "gpio_46",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA17, 47,
+		"dss_data17", NULL, NULL, "gpio_47",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA8, 38,
+		"dss_data8", NULL, NULL, "gpio_38",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(DSS_DATA9, 39,
+		"dss_data9", NULL, NULL, "gpio_39",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_DIN, 115,
+		"eac_ac_din", "mcbsp2_dr", NULL, "gpio_115",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_DOUT, 116,
+		"eac_ac_dout", "mcbsp2_dx", NULL, "gpio_116",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_FS, 114,
+		"eac_ac_fs", "mcbsp2_fsx", NULL, "gpio_114",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_MCLK, 117,
+		"eac_ac_mclk", NULL, NULL, "gpio_117",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_RST, 118,
+		"eac_ac_rst", "eac_bt_din", NULL, "gpio_118",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_AC_SCLK, 113,
+		"eac_ac_sclk", "mcbsp2_clkx", NULL, "gpio_113",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_DIN, 73,
+		"eac_bt_din", NULL, NULL, "gpio_73",
+		NULL, NULL, "etk_d9", NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_DOUT, 74,
+		"eac_bt_dout", NULL, "sti_clk", "gpio_74",
+		NULL, NULL, "etk_d8", NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_FS, 72,
+		"eac_bt_fs", NULL, NULL, "gpio_72",
+		NULL, NULL, "etk_d10", NULL),
+	_OMAP2420_MUXENTRY(EAC_BT_SCLK, 71,
+		"eac_bt_sclk", NULL, NULL, "gpio_71",
+		NULL, NULL, "etk_d11", NULL),
+	_OMAP2420_MUXENTRY(GPIO_119, 119,
+		"gpio_119", NULL, "sti_din", "gpio_119",
+		NULL, "sys_boot0", "etk_d12", NULL),
+	_OMAP2420_MUXENTRY(GPIO_120, 120,
+		"gpio_120", NULL, "sti_dout", "gpio_120",
+		"cam_d9", "sys_boot1", "etk_d13", NULL),
+	_OMAP2420_MUXENTRY(GPIO_121, 121,
+		"gpio_121", NULL, NULL, "gpio_121",
+		"jtag_emu2", "sys_boot2", "etk_d14", NULL),
+	_OMAP2420_MUXENTRY(GPIO_122, 122,
+		"gpio_122", NULL, NULL, "gpio_122",
+		"jtag_emu3", "sys_boot3", "etk_d15", NULL),
+	_OMAP2420_MUXENTRY(GPIO_124, 124,
+		"gpio_124", NULL, NULL, "gpio_124",
+		NULL, "sys_boot5", NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_125, 125,
+		"gpio_125", "sys_jtagsel1", "sys_jtagsel2", "gpio_125",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_36, 36,
+		"gpio_36", NULL, NULL, "gpio_36",
+		NULL, "sys_boot4", NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_62, 62,
+		"gpio_62", "uart1_rx", "usb1_dat", "gpio_62",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPIO_6, 6,
+		"gpio_6", "tv_detpulse", NULL, "gpio_6",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A10, 3,
+		"gpmc_a10", NULL, "sys_ndmareq5", "gpio_3",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A1, 12,
+		"gpmc_a1", "dss_data18", NULL, "gpio_12",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A2, 11,
+		"gpmc_a2", "dss_data19", NULL, "gpio_11",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A3, 10,
+		"gpmc_a3", "dss_data20", NULL, "gpio_10",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A4, 9,
+		"gpmc_a4", "dss_data21", NULL, "gpio_9",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A5, 8,
+		"gpmc_a5", "dss_data22", NULL, "gpio_8",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A6, 7,
+		"gpmc_a6", "dss_data23", NULL, "gpio_7",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A7, 6,
+		"gpmc_a7", NULL, "sys_ndmareq2", "gpio_6",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A8, 5,
+		"gpmc_a8", NULL, "sys_ndmareq3", "gpio_5",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_A9, 4,
+		"gpmc_a9", NULL, "sys_ndmareq4", "gpio_4",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_CLK, 21,
+		"gpmc_clk", NULL, NULL, "gpio_21",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D10, 18,
+		"gpmc_d10", "ssi2_rdy_rx", NULL, "gpio_18",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D11, 17,
+		"gpmc_d11", "ssi2_flag_rx", NULL, "gpio_17",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D12, 16,
+		"gpmc_d12", "ssi2_dat_rx", NULL, "gpio_16",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D13, 15,
+		"gpmc_d13", "ssi2_rdy_tx", NULL, "gpio_15",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D14, 14,
+		"gpmc_d14", "ssi2_flag_tx", NULL, "gpio_14",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D15, 13,
+		"gpmc_d15", "ssi2_dat_tx", NULL, "gpio_13",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D8, 20,
+		"gpmc_d8", NULL, NULL, "gpio_20",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_D9, 19,
+		"gpmc_d9", "ssi2_wake", NULL, "gpio_19",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NBE0, 29,
+		"gpmc_nbe0", NULL, NULL, "gpio_29",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NBE1, 30,
+		"gpmc_nbe1", NULL, NULL, "gpio_30",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS1, 22,
+		"gpmc_ncs1", NULL, NULL, "gpio_22",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS2, 23,
+		"gpmc_ncs2", NULL, NULL, "gpio_23",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS3, 24,
+		"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS4, 25,
+		"gpmc_ncs4", NULL, NULL, "gpio_25",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS5, 26,
+		"gpmc_ncs5", NULL, NULL, "gpio_26",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS6, 27,
+		"gpmc_ncs6", NULL, NULL, "gpio_27",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NCS7, 28,
+		"gpmc_ncs7", "gpmc_io_dir", "gpio_28", NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_NWP, 31,
+		"gpmc_nwp", NULL, NULL, "gpio_31",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_WAIT1, 33,
+		"gpmc_wait1", NULL, NULL, "gpio_33",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_WAIT2, 34,
+		"gpmc_wait2", NULL, NULL, "gpio_34",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(GPMC_WAIT3, 35,
+		"gpmc_wait3", NULL, NULL, "gpio_35",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(HDQ_SIO, 101,
+		"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(I2C2_SCL, 99,
+		"i2c2_scl", NULL, "gpt9_pwm_evt", "gpio_99",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(I2C2_SDA, 100,
+		"i2c2_sda", NULL, "spi2_ncs1", "gpio_100",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(JTAG_EMU0, 127,
+		"jtag_emu0", NULL, NULL, "gpio_127",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(JTAG_EMU1, 126,
+		"jtag_emu1", NULL, NULL, "gpio_126",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_CLKR, 92,
+		"mcbsp1_clkr", "ssi2_dat_tx", "vlynq_tx1", "gpio_92",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_CLKX, 98,
+		"mcbsp1_clkx", "ssi2_wake", "vlynq_nla", "gpio_98",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_DR, 95,
+		"mcbsp1_dr", "ssi2_dat_rx", "vlynq_rx1", "gpio_95",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_DX, 94,
+		"mcbsp1_dx", "ssi2_rdy_tx", "vlynq_clk", "gpio_94",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_FSR, 93,
+		"mcbsp1_fsr", "ssi2_flag_tx", "vlynq_tx0", "gpio_93",
+		"spi2_ncs1", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP1_FSX, 97,
+		"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP2_CLKX, 12,
+		"mcbsp2_clkx", NULL, "dss_data23", "gpio_12",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP2_DR, 11,
+		"mcbsp2_dr", NULL, "dss_data22", "gpio_11",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MCBSP_CLKS, 96,
+		"mcbsp_clks", "ssi2_flag_rx", "vlynq_rx0", "gpio_96",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CLKI, 59,
+		"sdmmc_clki", "ms_clki", NULL, "gpio_59",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CLKO, 0,
+		"sdmmc_clko", "ms_clko", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CMD_DIR, 8,
+		"sdmmc_cmd_dir", NULL, NULL, "gpio_8",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_CMD, 0,
+		"sdmmc_cmd", "ms_bs", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR0, 7,
+		"sdmmc_dat_dir0", "ms_dat0_dir", NULL, "gpio_7",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT0, 0,
+		"sdmmc_dat0", "ms_dat0", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR1, 78,
+		"sdmmc_dat_dir1", "ms_datu_dir", "uart2_rts", "gpio_78",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT1, 75,
+		"sdmmc_dat1", "ms_dat1", NULL, "gpio_75",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR2, 79,
+		"sdmmc_dat_dir2", "ms_datu_dir", "uart2_tx", "gpio_79",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT2, 76,
+		"sdmmc_dat2", "ms_dat2", "uart2_cts", "gpio_76",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT_DIR3, 80,
+		"sdmmc_dat_dir3", "ms_datu_dir", "uart2_rx", "gpio_80",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(MMC_DAT3, 77,
+		"sdmmc_dat3", "ms_dat3", NULL, "gpio_77",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_A12, 2,
+		"sdrc_a12", NULL, NULL, "gpio_2",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_A13, 1,
+		"sdrc_a13", NULL, NULL, "gpio_1",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_A14, 0,
+		"sdrc_a14", NULL, NULL, "gpio_0",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_CKE1, 38,
+		"sdrc_cke1", NULL, NULL, "gpio_38",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SDRC_NCS1, 37,
+		"sdrc_ncs1", NULL, NULL, "gpio_37",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_CLK, 81,
+		"spi1_clk", NULL, NULL, "gpio_81",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS0, 84,
+		"spi1_ncs0", NULL, NULL, "gpio_84",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS1, 85,
+		"spi1_ncs1", NULL, NULL, "gpio_85",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS2, 86,
+		"spi1_ncs2", NULL, NULL, "gpio_86",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_NCS3, 87,
+		"spi1_ncs3", NULL, NULL, "gpio_87",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_SIMO, 82,
+		"spi1_simo", NULL, NULL, "gpio_82",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI1_SOMI, 83,
+		"spi1_somi", NULL, NULL, "gpio_83",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_CLK, 88,
+		"spi2_clk", NULL, NULL, "gpio_88",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_NCS0, 91,
+		"spi2_ncs0", "gpt12_pwm_evt", NULL, "gpio_91",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_SIMO, 89,
+		"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SPI2_SOMI, 90,
+		"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_DAT_RX, 63,
+		"ssi1_dat_rx", "eac_md_sclk", NULL, "gpio_63",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_DAT_TX, 59,
+		"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_FLAG_RX, 64,
+		"ssi1_flag_rx", "eac_md_din", NULL, "gpio_64",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_FLAG_TX, 25,
+		"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_25",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_RDY_RX, 65,
+		"ssi1_rdy_rx", "eac_md_dout", NULL, "gpio_65",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_RDY_TX, 61,
+		"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SSI1_WAKE, 66,
+		"ssi1_wake", "eac_md_fs", NULL, "gpio_66",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SYS_CLKOUT, 123,
+		"sys_clkout", NULL, NULL, "gpio_123",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SYS_CLKREQ, 52,
+		"sys_clkreq", NULL, NULL, "gpio_52",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(SYS_NIRQ, 60,
+		"sys_nirq", NULL, NULL, "gpio_60",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_CTS, 32,
+		"uart1_cts", NULL, "dss_data18", "gpio_32",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_RTS, 8,
+		"uart1_rts", NULL, "dss_data19", "gpio_8",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_RX, 10,
+		"uart1_rx", NULL, "dss_data21", "gpio_10",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART1_TX, 9,
+		"uart1_tx", NULL, "dss_data20", "gpio_9",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_CTS, 67,
+		"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_RTS, 68,
+		"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_RX, 70,
+		"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART2_TX, 69,
+		"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_CTS_RCTX, 102,
+		"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_RTS_SD, 103,
+		"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_RX_IRRX, 105,
+		"uart3_rx_irrx", NULL, NULL, "gpio_105",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(UART3_TX_IRTX, 104,
+		"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_DAT, 112,
+		"usb0_dat", "uart3_rx_irrx", "uart2_rx", "gpio_112",
+		"uart2_tx", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_PUEN, 106,
+		"usb0_puen", "mcbsp2_dx", NULL, "gpio_106",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_RCV, 109,
+		"usb0_rcv", "mcbsp2_fsx", NULL, "gpio_109",
+		"uart2_cts", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_SE0, 111,
+		"usb0_se0", "uart3_tx_irtx", "uart2_tx", "gpio_111",
+		"uart2_rx", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_TXEN, 110,
+		"usb0_txen", "uart3_cts_rctx", "uart2_cts", "gpio_110",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_VM, 108,
+		"usb0_vm", "mcbsp2_clkx", NULL, "gpio_108",
+		"uart2_rx", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(USB0_VP, 107,
+		"usb0_vp", "mcbsp2_dr", NULL, "gpio_107",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_CLK, 13,
+		"vlynq_clk", "usb2_se0", "sys_ndmareq0", "gpio_13",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_NLA, 58,
+		"vlynq_nla", NULL, NULL, "gpio_58",
+		"cam_d6", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_RX0, 15,
+		"vlynq_rx0", "usb2_tllse0", NULL, "gpio_15",
+		"cam_d7", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_RX1, 14,
+		"vlynq_rx1", "usb2_rcv", "sys_ndmareq1", "gpio_14",
+		"cam_d8", NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_TX0, 17,
+		"vlynq_tx0", "usb2_txen", NULL, "gpio_17",
+		NULL, NULL, NULL, NULL),
+	_OMAP2420_MUXENTRY(VLYNQ_TX1, 16,
+		"vlynq_tx1", "usb2_dat", "sys_clkout2", "gpio_16",
+		NULL, NULL, NULL, NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for 447-pin POP package
+ */
+#ifdef CONFIG_DEBUG_FS
+struct omap_ball __initdata omap2420_pop_ball[] = {
+	_OMAP2420_BALLENTRY(CAM_D0, "y4", NULL),
+	_OMAP2420_BALLENTRY(CAM_D1, "y3", NULL),
+	_OMAP2420_BALLENTRY(CAM_D2, "u7", NULL),
+	_OMAP2420_BALLENTRY(CAM_D3, "ab3", NULL),
+	_OMAP2420_BALLENTRY(CAM_D4, "v2", NULL),
+	_OMAP2420_BALLENTRY(CAM_D5, "ad3", NULL),
+	_OMAP2420_BALLENTRY(CAM_D6, "aa4", NULL),
+	_OMAP2420_BALLENTRY(CAM_D7, "ab4", NULL),
+	_OMAP2420_BALLENTRY(CAM_D8, "ac6", NULL),
+	_OMAP2420_BALLENTRY(CAM_D9, "ac7", NULL),
+	_OMAP2420_BALLENTRY(CAM_HS, "v4", NULL),
+	_OMAP2420_BALLENTRY(CAM_LCLK, "ad6", NULL),
+	_OMAP2420_BALLENTRY(CAM_VS, "p7", NULL),
+	_OMAP2420_BALLENTRY(CAM_XCLK, "w4", NULL),
+	_OMAP2420_BALLENTRY(DSS_ACBIAS, "ae8", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA10, "ac12", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA11, "ae11", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA12, "ae13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA13, "ad13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA14, "ac13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA15, "y12", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA16, "ad14", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA17, "y13", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA8, "ad11", NULL),
+	_OMAP2420_BALLENTRY(DSS_DATA9, "ad12", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_DIN, "ad19", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_DOUT, "af22", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_FS, "ad16", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_MCLK, "y17", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_RST, "ae22", NULL),
+	_OMAP2420_BALLENTRY(EAC_AC_SCLK, "ac18", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_DIN, "u8", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_DOUT, "ad5", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_FS, "w7", NULL),
+	_OMAP2420_BALLENTRY(EAC_BT_SCLK, "ad4", NULL),
+	_OMAP2420_BALLENTRY(GPIO_119, "af6", NULL),
+	_OMAP2420_BALLENTRY(GPIO_120, "af4", NULL),
+	_OMAP2420_BALLENTRY(GPIO_121, "ae6", NULL),
+	_OMAP2420_BALLENTRY(GPIO_122, "w3", NULL),
+	_OMAP2420_BALLENTRY(GPIO_124, "y19", NULL),
+	_OMAP2420_BALLENTRY(GPIO_125, "ae24", NULL),
+	_OMAP2420_BALLENTRY(GPIO_36, "y18", NULL),
+	_OMAP2420_BALLENTRY(GPIO_6, "d6", NULL),
+	_OMAP2420_BALLENTRY(GPIO_62, "ad18", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A1, "m8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A10, "d5", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A2, "w9", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A3, "af10", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A4, "w8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A5, "ae16", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A6, "af9", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A7, "e4", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A8, "j7", NULL),
+	_OMAP2420_BALLENTRY(GPMC_A9, "ae18", NULL),
+	_OMAP2420_BALLENTRY(GPMC_CLK, "p1", "l1"),
+	_OMAP2420_BALLENTRY(GPMC_D10, "t1", "n1"),
+	_OMAP2420_BALLENTRY(GPMC_D11, "u2", "p2"),
+	_OMAP2420_BALLENTRY(GPMC_D12, "u1", "p1"),
+	_OMAP2420_BALLENTRY(GPMC_D13, "p2", "m1"),
+	_OMAP2420_BALLENTRY(GPMC_D14, "h2", "j2"),
+	_OMAP2420_BALLENTRY(GPMC_D15, "h1", "k2"),
+	_OMAP2420_BALLENTRY(GPMC_D8, "v1", "r1"),
+	_OMAP2420_BALLENTRY(GPMC_D9, "y1", "t1"),
+	_OMAP2420_BALLENTRY(GPMC_NBE0, "af12", "aa10"),
+	_OMAP2420_BALLENTRY(GPMC_NBE1, "u3", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS1, "af14", "w1"),
+	_OMAP2420_BALLENTRY(GPMC_NCS2, "g4", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS3, "t8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS4, "h8", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS5, "k3", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS6, "m7", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NCS7, "p3", NULL),
+	_OMAP2420_BALLENTRY(GPMC_NWP, "ae15", "y5"),
+	_OMAP2420_BALLENTRY(GPMC_WAIT1, "ae20", "y8"),
+	_OMAP2420_BALLENTRY(GPMC_WAIT2, "n2", NULL),
+	_OMAP2420_BALLENTRY(GPMC_WAIT3, "t4", NULL),
+	_OMAP2420_BALLENTRY(HDQ_SIO, "t23", NULL),
+	_OMAP2420_BALLENTRY(I2C2_SCL, "l2", NULL),
+	_OMAP2420_BALLENTRY(I2C2_SDA, "k19", NULL),
+	_OMAP2420_BALLENTRY(JTAG_EMU0, "n24", NULL),
+	_OMAP2420_BALLENTRY(JTAG_EMU1, "ac22", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_CLKR, "y24", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_CLKX, "t19", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_DR, "u23", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_DX, "r24", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_FSR, "r20", NULL),
+	_OMAP2420_BALLENTRY(MCBSP1_FSX, "r23", NULL),
+	_OMAP2420_BALLENTRY(MCBSP2_CLKX, "t24", NULL),
+	_OMAP2420_BALLENTRY(MCBSP2_DR, "p20", NULL),
+	_OMAP2420_BALLENTRY(MCBSP_CLKS, "p23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CLKI, "c23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CLKO, "h23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CMD, "j23", NULL),
+	_OMAP2420_BALLENTRY(MMC_CMD_DIR, "j24", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT0, "h17", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR0, "f23", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT1, "g19", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR1, "d23", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT2, "h20", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR2, "g23", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT3, "d24", NULL),
+	_OMAP2420_BALLENTRY(MMC_DAT_DIR3, "e23", NULL),
+	_OMAP2420_BALLENTRY(SDRC_A12, "w26", "r21"),
+	_OMAP2420_BALLENTRY(SDRC_A13, "w25", "aa15"),
+	_OMAP2420_BALLENTRY(SDRC_A14, "aa26", "y12"),
+	_OMAP2420_BALLENTRY(SDRC_CKE1, "ae25", "y13"),
+	_OMAP2420_BALLENTRY(SDRC_NCS1, "y25", "t20"),
+	_OMAP2420_BALLENTRY(SPI1_CLK, "y23", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS0, "w24", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS1, "w23", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS2, "v23", NULL),
+	_OMAP2420_BALLENTRY(SPI1_NCS3, "u20", NULL),
+	_OMAP2420_BALLENTRY(SPI1_SIMO, "h10", NULL),
+	_OMAP2420_BALLENTRY(SPI1_SOMI, "v19", NULL),
+	_OMAP2420_BALLENTRY(SPI2_CLK, "v24", NULL),
+	_OMAP2420_BALLENTRY(SPI2_NCS0, "aa24", NULL),
+	_OMAP2420_BALLENTRY(SPI2_SIMO, "u24", NULL),
+	_OMAP2420_BALLENTRY(SPI2_SOMI, "v25", NULL),
+	_OMAP2420_BALLENTRY(SSI1_DAT_RX, "w15", NULL),
+	_OMAP2420_BALLENTRY(SSI1_DAT_TX, "w13", NULL),
+	_OMAP2420_BALLENTRY(SSI1_FLAG_RX, "af11", NULL),
+	_OMAP2420_BALLENTRY(SSI1_FLAG_TX, "ac15", NULL),
+	_OMAP2420_BALLENTRY(SSI1_RDY_RX, "ac16", NULL),
+	_OMAP2420_BALLENTRY(SSI1_RDY_TX, "af15", NULL),
+	_OMAP2420_BALLENTRY(SSI1_WAKE, "ad15", NULL),
+	_OMAP2420_BALLENTRY(SYS_CLKOUT, "ae19", NULL),
+	_OMAP2420_BALLENTRY(SYS_CLKREQ, "ad20", NULL),
+	_OMAP2420_BALLENTRY(SYS_NIRQ, "y20", NULL),
+	_OMAP2420_BALLENTRY(UART1_CTS, "g20", NULL),
+	_OMAP2420_BALLENTRY(UART1_RTS, "k20", NULL),
+	_OMAP2420_BALLENTRY(UART1_RX, "t20", NULL),
+	_OMAP2420_BALLENTRY(UART1_TX, "h12", NULL),
+	_OMAP2420_BALLENTRY(UART2_CTS, "ac24", NULL),
+	_OMAP2420_BALLENTRY(UART2_RTS, "w20", NULL),
+	_OMAP2420_BALLENTRY(UART2_RX, "ad24", NULL),
+	_OMAP2420_BALLENTRY(UART2_TX, "ab24", NULL),
+	_OMAP2420_BALLENTRY(UART3_CTS_RCTX, "k24", NULL),
+	_OMAP2420_BALLENTRY(UART3_RTS_SD, "m20", NULL),
+	_OMAP2420_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
+	_OMAP2420_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
+	_OMAP2420_BALLENTRY(USB0_DAT, "j25", NULL),
+	_OMAP2420_BALLENTRY(USB0_PUEN, "l23", NULL),
+	_OMAP2420_BALLENTRY(USB0_RCV, "k23", NULL),
+	_OMAP2420_BALLENTRY(USB0_SE0, "l24", NULL),
+	_OMAP2420_BALLENTRY(USB0_TXEN, "m24", NULL),
+	_OMAP2420_BALLENTRY(USB0_VM, "n23", NULL),
+	_OMAP2420_BALLENTRY(USB0_VP, "m23", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_CLK, "w12", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_NLA, "ae10", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_RX0, "ad7", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_RX1, "w10", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_TX0, "y15", NULL),
+	_OMAP2420_BALLENTRY(VLYNQ_TX1, "w14", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap2420_pop_ball	 NULL
+#endif
+
+int __init omap2420_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+	struct omap_ball *package_balls = NULL;
+
+	switch (flags & OMAP_PACKAGE_MASK) {
+	case OMAP_PACKAGE_ZAC:
+		package_balls = omap2420_pop_ball;
+		break;
+	case OMAP_PACKAGE_ZAF:
+		/* REVISIT: Please add data */
+	default:
+		pr_warning("mux: No ball data available for omap2420 package\n");
+	}
+
+	return omap_mux_init(OMAP2420_CONTROL_PADCONF_MUX_PBASE,
+			     OMAP2420_CONTROL_PADCONF_MUX_SIZE,
+				omap2420_muxmodes, NULL, board_subset,
+				package_balls);
+}

arch/arm/mach-omap2/mux2420.h

@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP2420_CONTROL_PADCONF_MUX_PBASE			0x48000030LU
+
+#define OMAP2420_MUX(mode0, mux_value)					\
+{									\
+	.reg_offset	= (OMAP2420_CONTROL_PADCONF_##mode0##_OFFSET),	\
+	.value		= (mux_value),					\
+}
+
+/*
+ * OMAP2420 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM.  Add 0x48000030 to these values to get the
+ * absolute addresses.  The name in the macro is the mode-0 name of
+ * the pin.  NOTE: These registers are 8-bits wide.
+ */
+#define OMAP2420_CONTROL_PADCONF_SDRC_A14_OFFSET			0x000
+#define OMAP2420_CONTROL_PADCONF_SDRC_A13_OFFSET			0x001
+#define OMAP2420_CONTROL_PADCONF_SDRC_A12_OFFSET			0x002
+#define OMAP2420_CONTROL_PADCONF_SDRC_BA1_OFFSET			0x003
+#define OMAP2420_CONTROL_PADCONF_SDRC_BA0_OFFSET			0x004
+#define OMAP2420_CONTROL_PADCONF_SDRC_A11_OFFSET			0x005
+#define OMAP2420_CONTROL_PADCONF_SDRC_A10_OFFSET			0x006
+#define OMAP2420_CONTROL_PADCONF_SDRC_A9_OFFSET				0x007
+#define OMAP2420_CONTROL_PADCONF_SDRC_A8_OFFSET				0x008
+#define OMAP2420_CONTROL_PADCONF_SDRC_A7_OFFSET				0x009
+#define OMAP2420_CONTROL_PADCONF_SDRC_A6_OFFSET				0x00a
+#define OMAP2420_CONTROL_PADCONF_SDRC_A5_OFFSET				0x00b
+#define OMAP2420_CONTROL_PADCONF_SDRC_A4_OFFSET				0x00c
+#define OMAP2420_CONTROL_PADCONF_SDRC_A3_OFFSET				0x00d
+#define OMAP2420_CONTROL_PADCONF_SDRC_A2_OFFSET				0x00e
+#define OMAP2420_CONTROL_PADCONF_SDRC_A1_OFFSET				0x00f
+#define OMAP2420_CONTROL_PADCONF_SDRC_A0_OFFSET				0x010
+#define OMAP2420_CONTROL_PADCONF_SDRC_D31_OFFSET			0x021
+#define OMAP2420_CONTROL_PADCONF_SDRC_D30_OFFSET			0x022
+#define OMAP2420_CONTROL_PADCONF_SDRC_D29_OFFSET			0x023
+#define OMAP2420_CONTROL_PADCONF_SDRC_D28_OFFSET			0x024
+#define OMAP2420_CONTROL_PADCONF_SDRC_D27_OFFSET			0x025
+#define OMAP2420_CONTROL_PADCONF_SDRC_D26_OFFSET			0x026
+#define OMAP2420_CONTROL_PADCONF_SDRC_D25_OFFSET			0x027
+#define OMAP2420_CONTROL_PADCONF_SDRC_D24_OFFSET			0x028
+#define OMAP2420_CONTROL_PADCONF_SDRC_D23_OFFSET			0x029
+#define OMAP2420_CONTROL_PADCONF_SDRC_D22_OFFSET			0x02a
+#define OMAP2420_CONTROL_PADCONF_SDRC_D21_OFFSET			0x02b
+#define OMAP2420_CONTROL_PADCONF_SDRC_D20_OFFSET			0x02c
+#define OMAP2420_CONTROL_PADCONF_SDRC_D19_OFFSET			0x02d
+#define OMAP2420_CONTROL_PADCONF_SDRC_D18_OFFSET			0x02e
+#define OMAP2420_CONTROL_PADCONF_SDRC_D17_OFFSET			0x02f
+#define OMAP2420_CONTROL_PADCONF_SDRC_D16_OFFSET			0x030
+#define OMAP2420_CONTROL_PADCONF_SDRC_D15_OFFSET			0x031
+#define OMAP2420_CONTROL_PADCONF_SDRC_D14_OFFSET			0x032
+#define OMAP2420_CONTROL_PADCONF_SDRC_D13_OFFSET			0x033
+#define OMAP2420_CONTROL_PADCONF_SDRC_D12_OFFSET			0x034
+#define OMAP2420_CONTROL_PADCONF_SDRC_D11_OFFSET			0x035
+#define OMAP2420_CONTROL_PADCONF_SDRC_D10_OFFSET			0x036
+#define OMAP2420_CONTROL_PADCONF_SDRC_D9_OFFSET				0x037
+#define OMAP2420_CONTROL_PADCONF_SDRC_D8_OFFSET				0x038
+#define OMAP2420_CONTROL_PADCONF_SDRC_D7_OFFSET				0x039
+#define OMAP2420_CONTROL_PADCONF_SDRC_D6_OFFSET				0x03a
+#define OMAP2420_CONTROL_PADCONF_SDRC_D5_OFFSET				0x03b
+#define OMAP2420_CONTROL_PADCONF_SDRC_D4_OFFSET				0x03c
+#define OMAP2420_CONTROL_PADCONF_SDRC_D3_OFFSET				0x03d
+#define OMAP2420_CONTROL_PADCONF_SDRC_D2_OFFSET				0x03e
+#define OMAP2420_CONTROL_PADCONF_SDRC_D1_OFFSET				0x03f
+#define OMAP2420_CONTROL_PADCONF_SDRC_D0_OFFSET				0x040
+#define OMAP2420_CONTROL_PADCONF_GPMC_A10_OFFSET			0x041
+#define OMAP2420_CONTROL_PADCONF_GPMC_A9_OFFSET				0x042
+#define OMAP2420_CONTROL_PADCONF_GPMC_A8_OFFSET				0x043
+#define OMAP2420_CONTROL_PADCONF_GPMC_A7_OFFSET				0x044
+#define OMAP2420_CONTROL_PADCONF_GPMC_A6_OFFSET				0x045
+#define OMAP2420_CONTROL_PADCONF_GPMC_A5_OFFSET				0x046
+#define OMAP2420_CONTROL_PADCONF_GPMC_A4_OFFSET				0x047
+#define OMAP2420_CONTROL_PADCONF_GPMC_A3_OFFSET				0x048
+#define OMAP2420_CONTROL_PADCONF_GPMC_A2_OFFSET				0x049
+#define OMAP2420_CONTROL_PADCONF_GPMC_A1_OFFSET				0x04a
+#define OMAP2420_CONTROL_PADCONF_GPMC_D15_OFFSET			0x04b
+#define OMAP2420_CONTROL_PADCONF_GPMC_D14_OFFSET			0x04c
+#define OMAP2420_CONTROL_PADCONF_GPMC_D13_OFFSET			0x04d
+#define OMAP2420_CONTROL_PADCONF_GPMC_D12_OFFSET			0x04e
+#define OMAP2420_CONTROL_PADCONF_GPMC_D11_OFFSET			0x04f
+#define OMAP2420_CONTROL_PADCONF_GPMC_D10_OFFSET			0x050
+#define OMAP2420_CONTROL_PADCONF_GPMC_D9_OFFSET				0x051
+#define OMAP2420_CONTROL_PADCONF_GPMC_D8_OFFSET				0x052
+#define OMAP2420_CONTROL_PADCONF_GPMC_D7_OFFSET				0x053
+#define OMAP2420_CONTROL_PADCONF_GPMC_D6_OFFSET				0x054
+#define OMAP2420_CONTROL_PADCONF_GPMC_D5_OFFSET				0x055
+#define OMAP2420_CONTROL_PADCONF_GPMC_D4_OFFSET				0x056
+#define OMAP2420_CONTROL_PADCONF_GPMC_D3_OFFSET				0x057
+#define OMAP2420_CONTROL_PADCONF_GPMC_D2_OFFSET				0x058
+#define OMAP2420_CONTROL_PADCONF_GPMC_D1_OFFSET				0x059
+#define OMAP2420_CONTROL_PADCONF_GPMC_D0_OFFSET				0x05a
+#define OMAP2420_CONTROL_PADCONF_GPMC_CLK_OFFSET			0x05b
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS0_OFFSET			0x05c
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS1_OFFSET			0x05d
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS2_OFFSET			0x05e
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS3_OFFSET			0x05f
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS4_OFFSET			0x060
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS5_OFFSET			0x061
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS6_OFFSET			0x062
+#define OMAP2420_CONTROL_PADCONF_GPMC_NCS7_OFFSET			0x063
+#define OMAP2420_CONTROL_PADCONF_GPMC_NALE_ALE_OFFSET			0x064
+#define OMAP2420_CONTROL_PADCONF_GPMC_NOE_OFFSET			0x065
+#define OMAP2420_CONTROL_PADCONF_GPMC_NWE_OFFSET			0x066
+#define OMAP2420_CONTROL_PADCONF_GPMC_NBE0_OFFSET			0x067
+#define OMAP2420_CONTROL_PADCONF_GPMC_NBE1_OFFSET			0x068
+#define OMAP2420_CONTROL_PADCONF_GPMC_NWP_OFFSET			0x069
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT0_OFFSET			0x06a
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT1_OFFSET			0x06b
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT2_OFFSET			0x06c
+#define OMAP2420_CONTROL_PADCONF_GPMC_WAIT3_OFFSET			0x06d
+#define OMAP2420_CONTROL_PADCONF_SDRC_CLK_OFFSET			0x06e
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCLK_OFFSET			0x06f
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCS0_OFFSET			0x070
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCS1_OFFSET			0x071
+#define OMAP2420_CONTROL_PADCONF_SDRC_CKE0_OFFSET			0x072
+#define OMAP2420_CONTROL_PADCONF_SDRC_CKE1_OFFSET			0x073
+#define OMAP2420_CONTROL_PADCONF_SDRC_NRAS_OFFSET			0x074
+#define OMAP2420_CONTROL_PADCONF_SDRC_NCAS_OFFSET			0x075
+#define OMAP2420_CONTROL_PADCONF_SDRC_NWE_OFFSET			0x076
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM0_OFFSET			0x077
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM1_OFFSET			0x078
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM2_OFFSET			0x079
+#define OMAP2420_CONTROL_PADCONF_SDRC_DM3_OFFSET			0x07a
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS0_OFFSET			0x07f
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS1_OFFSET			0x080
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS2_OFFSET			0x081
+#define OMAP2420_CONTROL_PADCONF_SDRC_DQS3_OFFSET			0x082
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA0_OFFSET			0x083
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA1_OFFSET			0x084
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA2_OFFSET			0x085
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA3_OFFSET			0x086
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA4_OFFSET			0x087
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA5_OFFSET			0x088
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA6_OFFSET			0x089
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA7_OFFSET			0x08a
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA8_OFFSET			0x08b
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA9_OFFSET			0x08c
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA10_OFFSET			0x08d
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA11_OFFSET			0x08e
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA12_OFFSET			0x08f
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA13_OFFSET			0x090
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA14_OFFSET			0x091
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA15_OFFSET			0x092
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA16_OFFSET			0x093
+#define OMAP2420_CONTROL_PADCONF_DSS_DATA17_OFFSET			0x094
+#define OMAP2420_CONTROL_PADCONF_UART1_CTS_OFFSET			0x095
+#define OMAP2420_CONTROL_PADCONF_UART1_RTS_OFFSET			0x096
+#define OMAP2420_CONTROL_PADCONF_UART1_TX_OFFSET			0x097
+#define OMAP2420_CONTROL_PADCONF_UART1_RX_OFFSET			0x098
+#define OMAP2420_CONTROL_PADCONF_MCBSP2_DR_OFFSET			0x099
+#define OMAP2420_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET			0x09a
+#define OMAP2420_CONTROL_PADCONF_DSS_PCL_OFFSET				0x09b
+#define OMAP2420_CONTROL_PADCONF_DSS_VSYNC_OFFSET			0x09c
+#define OMAP2420_CONTROL_PADCONF_DSS_HSYNC_OFFSET			0x09d
+#define OMAP2420_CONTROL_PADCONF_DSS_ACBIAS_OFFSET			0x09e
+#define OMAP2420_CONTROL_PADCONF_CAM_D9_OFFSET				0x09f
+#define OMAP2420_CONTROL_PADCONF_CAM_D8_OFFSET				0x0a0
+#define OMAP2420_CONTROL_PADCONF_CAM_D7_OFFSET				0x0a1
+#define OMAP2420_CONTROL_PADCONF_CAM_D6_OFFSET				0x0a2
+#define OMAP2420_CONTROL_PADCONF_CAM_D5_OFFSET				0x0a3
+#define OMAP2420_CONTROL_PADCONF_CAM_D4_OFFSET				0x0a4
+#define OMAP2420_CONTROL_PADCONF_CAM_D3_OFFSET				0x0a5
+#define OMAP2420_CONTROL_PADCONF_CAM_D2_OFFSET				0x0a6
+#define OMAP2420_CONTROL_PADCONF_CAM_D1_OFFSET				0x0a7
+#define OMAP2420_CONTROL_PADCONF_CAM_D0_OFFSET				0x0a8
+#define OMAP2420_CONTROL_PADCONF_CAM_HS_OFFSET				0x0a9
+#define OMAP2420_CONTROL_PADCONF_CAM_VS_OFFSET				0x0aa
+#define OMAP2420_CONTROL_PADCONF_CAM_LCLK_OFFSET			0x0ab
+#define OMAP2420_CONTROL_PADCONF_CAM_XCLK_OFFSET			0x0ac
+#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET			0x0ad
+#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET			0x0ae
+#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET			0x0af
+#define OMAP2420_CONTROL_PADCONF_GPIO_62_OFFSET				0x0b0
+#define OMAP2420_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET			0x0b1
+#define OMAP2420_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET			0x0b2
+#define OMAP2420_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET			0x0b3
+#define OMAP2420_CONTROL_PADCONF_SSI1_WAKE_OFFSET			0x0b4
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_CLK_OFFSET			0x0b5
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX1_OFFSET			0x0b6
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_RX0_OFFSET			0x0b7
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX1_OFFSET			0x0b8
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_TX0_OFFSET			0x0b9
+#define OMAP2420_CONTROL_PADCONF_VLYNQ_NLA_OFFSET			0x0ba
+#define OMAP2420_CONTROL_PADCONF_UART2_CTS_OFFSET			0x0bb
+#define OMAP2420_CONTROL_PADCONF_UART2_RTS_OFFSET			0x0bc
+#define OMAP2420_CONTROL_PADCONF_UART2_TX_OFFSET			0x0bd
+#define OMAP2420_CONTROL_PADCONF_UART2_RX_OFFSET			0x0be
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_SCLK_OFFSET			0x0bf
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_FS_OFFSET			0x0c0
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_DIN_OFFSET			0x0c1
+#define OMAP2420_CONTROL_PADCONF_EAC_BT_DOUT_OFFSET			0x0c2
+#define OMAP2420_CONTROL_PADCONF_MMC_CLKO_OFFSET			0x0c3
+#define OMAP2420_CONTROL_PADCONF_MMC_CMD_OFFSET				0x0c4
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT0_OFFSET			0x0c5
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT1_OFFSET			0x0c6
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT2_OFFSET			0x0c7
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT3_OFFSET			0x0c8
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR0_OFFSET			0x0c9
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR1_OFFSET			0x0ca
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR2_OFFSET			0x0cb
+#define OMAP2420_CONTROL_PADCONF_MMC_DAT_DIR3_OFFSET			0x0cc
+#define OMAP2420_CONTROL_PADCONF_MMC_CMD_DIR_OFFSET			0x0cd
+#define OMAP2420_CONTROL_PADCONF_MMC_CLKI_OFFSET			0x0ce
+#define OMAP2420_CONTROL_PADCONF_SPI1_CLK_OFFSET			0x0cf
+#define OMAP2420_CONTROL_PADCONF_SPI1_SIMO_OFFSET			0x0d0
+#define OMAP2420_CONTROL_PADCONF_SPI1_SOMI_OFFSET			0x0d1
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS0_OFFSET			0x0d2
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS1_OFFSET			0x0d3
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS2_OFFSET			0x0d4
+#define OMAP2420_CONTROL_PADCONF_SPI1_NCS3_OFFSET			0x0d5
+#define OMAP2420_CONTROL_PADCONF_SPI2_CLK_OFFSET			0x0d6
+#define OMAP2420_CONTROL_PADCONF_SPI2_SIMO_OFFSET			0x0d7
+#define OMAP2420_CONTROL_PADCONF_SPI2_SOMI_OFFSET			0x0d8
+#define OMAP2420_CONTROL_PADCONF_SPI2_NCS0_OFFSET			0x0d9
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET			0x0da
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSR_OFFSET			0x0db
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_DX_OFFSET			0x0dc
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_DR_OFFSET			0x0dd
+#define OMAP2420_CONTROL_PADCONF_MCBSP_CLKS_OFFSET			0x0de
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_FSX_OFFSET			0x0df
+#define OMAP2420_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET			0x0e0
+#define OMAP2420_CONTROL_PADCONF_I2C1_SCL_OFFSET			0x0e1
+#define OMAP2420_CONTROL_PADCONF_I2C1_SDA_OFFSET			0x0e2
+#define OMAP2420_CONTROL_PADCONF_I2C2_SCL_OFFSET			0x0e3
+#define OMAP2420_CONTROL_PADCONF_I2C2_SDA_OFFSET			0x0e4
+#define OMAP2420_CONTROL_PADCONF_HDQ_SIO_OFFSET				0x0e5
+#define OMAP2420_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET			0x0e6
+#define OMAP2420_CONTROL_PADCONF_UART3_RTS_SD_OFFSET			0x0e7
+#define OMAP2420_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET			0x0e8
+#define OMAP2420_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET			0x0e9
+#define OMAP2420_CONTROL_PADCONF_TV_CVBS_OFFSET				0x0ea
+#define OMAP2420_CONTROL_PADCONF_TV_VREF_OFFSET				0x0eb
+#define OMAP2420_CONTROL_PADCONF_TV_RREF_OFFSET				0x0ec
+#define OMAP2420_CONTROL_PADCONF_USB0_PUEN_OFFSET			0x0ed
+#define OMAP2420_CONTROL_PADCONF_USB0_VP_OFFSET				0x0ee
+#define OMAP2420_CONTROL_PADCONF_USB0_VM_OFFSET				0x0ef
+#define OMAP2420_CONTROL_PADCONF_USB0_RCV_OFFSET			0x0f0
+#define OMAP2420_CONTROL_PADCONF_USB0_TXEN_OFFSET			0x0f1
+#define OMAP2420_CONTROL_PADCONF_USB0_SE0_OFFSET			0x0f2
+#define OMAP2420_CONTROL_PADCONF_USB0_DAT_OFFSET			0x0f3
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_SCLK_OFFSET			0x0f4
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_FS_OFFSET			0x0f5
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_DIN_OFFSET			0x0f6
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_DOUT_OFFSET			0x0f7
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_MCLK_OFFSET			0x0f8
+#define OMAP2420_CONTROL_PADCONF_EAC_AC_RST_OFFSET			0x0f9
+#define OMAP2420_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET			0x0fa
+#define OMAP2420_CONTROL_PADCONF_SYS_NRESWARM_OFFSET			0x0fb
+#define OMAP2420_CONTROL_PADCONF_SYS_NIRQ_OFFSET			0x0fc
+#define OMAP2420_CONTROL_PADCONF_SYS_NV_OFFSET				0x0fd
+#define OMAP2420_CONTROL_PADCONF_GPIO_119_OFFSET			0x0fe
+#define OMAP2420_CONTROL_PADCONF_GPIO_120_OFFSET			0x0ff
+#define OMAP2420_CONTROL_PADCONF_GPIO_121_OFFSET			0x100
+#define OMAP2420_CONTROL_PADCONF_GPIO_122_OFFSET			0x101
+#define OMAP2420_CONTROL_PADCONF_SYS_32K_OFFSET				0x102
+#define OMAP2420_CONTROL_PADCONF_SYS_XTALIN_OFFSET			0x103
+#define OMAP2420_CONTROL_PADCONF_SYS_XTALOUT_OFFSET			0x104
+#define OMAP2420_CONTROL_PADCONF_GPIO_36_OFFSET				0x105
+#define OMAP2420_CONTROL_PADCONF_SYS_CLKREQ_OFFSET			0x106
+#define OMAP2420_CONTROL_PADCONF_SYS_CLKOUT_OFFSET			0x107
+#define OMAP2420_CONTROL_PADCONF_GPIO_6_OFFSET				0x108
+#define OMAP2420_CONTROL_PADCONF_GPIO_124_OFFSET			0x109
+#define OMAP2420_CONTROL_PADCONF_GPIO_125_OFFSET			0x10a
+#define OMAP2420_CONTROL_PADCONF_JTAG_EMU1_OFFSET			0x10b
+#define OMAP2420_CONTROL_PADCONF_JTAG_EMU0_OFFSET			0x10c
+#define OMAP2420_CONTROL_PADCONF_JTAG_NTRST_OFFSET			0x10d
+#define OMAP2420_CONTROL_PADCONF_JTAG_TCK_OFFSET			0x10e
+#define OMAP2420_CONTROL_PADCONF_JTAG_RTCK_OFFSET			0x10f
+#define OMAP2420_CONTROL_PADCONF_JTAG_TMS_OFFSET			0x110
+#define OMAP2420_CONTROL_PADCONF_JTAG_TDI_OFFSET			0x111
+#define OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET			0x112
+
+#define OMAP2420_CONTROL_PADCONF_MUX_SIZE			\
+		(OMAP2420_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x1)

arch/arm/mach-omap2/mux2430.c

@@ -0,0 +1,791 @@
+/*
+ * Copyright (C) 2010 Nokia
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
+}
+
+#else
+
+#define _OMAP2430_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+}
+
+#endif
+
+#define _OMAP2430_BALLENTRY(M0, bb, bt)					\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.balls		= { bb, bt },					\
+}
+
+/*
+ * Superset of all mux modes for omap2430
+ */
+static struct omap_mux __initdata omap2430_muxmodes[] = {
+	_OMAP2430_MUXENTRY(CAM_D0, 133,
+		"cam_d0", "hw_dbg0", "sti_dout", "gpio_133",
+		NULL, NULL, "etk_d2", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D10, 146,
+		"cam_d10", NULL, NULL, "gpio_146",
+		NULL, NULL, "etk_d12", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D11, 145,
+		"cam_d11", NULL, NULL, "gpio_145",
+		NULL, NULL, "etk_d13", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D1, 132,
+		"cam_d1", "hw_dbg1", "sti_din", "gpio_132",
+		NULL, NULL, "etk_d3", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D2, 129,
+		"cam_d2", "hw_dbg2", "mcbsp1_clkx", "gpio_129",
+		NULL, NULL, "etk_d4", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D3, 128,
+		"cam_d3", "hw_dbg3", "mcbsp1_dr", "gpio_128",
+		NULL, NULL, "etk_d5", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D4, 143,
+		"cam_d4", "hw_dbg4", "mcbsp1_fsr", "gpio_143",
+		NULL, NULL, "etk_d6", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D5, 112,
+		"cam_d5", "hw_dbg5", "mcbsp1_clkr", "gpio_112",
+		NULL, NULL, "etk_d7", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D6, 137,
+		"cam_d6", "hw_dbg6", NULL, "gpio_137",
+		NULL, NULL, "etk_d8", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D7, 136,
+		"cam_d7", "hw_dbg7", NULL, "gpio_136",
+		NULL, NULL, "etk_d9", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D8, 135,
+		"cam_d8", "hw_dbg8", NULL, "gpio_135",
+		NULL, NULL, "etk_d10", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_D9, 134,
+		"cam_d9", "hw_dbg9", NULL, "gpio_134",
+		NULL, NULL, "etk_d11", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_HS, 11,
+		"cam_hs", "hw_dbg10", "mcbsp1_dx", "gpio_11",
+		NULL, NULL, "etk_d1", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_LCLK, 0,
+		"cam_lclk", NULL, "mcbsp_clks", NULL,
+		NULL, NULL, "etk_c1", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_VS, 12,
+		"cam_vs", "hw_dbg11", "mcbsp1_fsx", "gpio_12",
+		NULL, NULL, "etk_d0", "safe_mode"),
+	_OMAP2430_MUXENTRY(CAM_XCLK, 0,
+		"cam_xclk", NULL, "sti_clk", NULL,
+		NULL, NULL, "etk_c2", NULL),
+	_OMAP2430_MUXENTRY(DSS_ACBIAS, 48,
+		"dss_acbias", NULL, "mcbsp2_fsx", "gpio_48",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA0, 40,
+		"dss_data0", "uart1_cts", NULL, "gpio_40",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA10, 128,
+		"dss_data10", "sdi_data1n", NULL, "gpio_128",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA11, 129,
+		"dss_data11", "sdi_data1p", NULL, "gpio_129",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA12, 130,
+		"dss_data12", "sdi_data2n", NULL, "gpio_130",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA13, 131,
+		"dss_data13", "sdi_data2p", NULL, "gpio_131",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA14, 132,
+		"dss_data14", "sdi_data3n", NULL, "gpio_132",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA15, 133,
+		"dss_data15", "sdi_data3p", NULL, "gpio_133",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA16, 46,
+		"dss_data16", NULL, NULL, "gpio_46",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA17, 47,
+		"dss_data17", NULL, NULL, "gpio_47",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA1, 41,
+		"dss_data1", "uart1_rts", NULL, "gpio_41",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA2, 42,
+		"dss_data2", "uart1_tx", NULL, "gpio_42",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA3, 43,
+		"dss_data3", "uart1_rx", NULL, "gpio_43",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA4, 44,
+		"dss_data4", "uart3_rx_irrx", NULL, "gpio_44",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA5, 45,
+		"dss_data5", "uart3_tx_irtx", NULL, "gpio_45",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA6, 144,
+		"dss_data6", NULL, NULL, "gpio_144",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA7, 147,
+		"dss_data7", NULL, NULL, "gpio_147",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA8, 38,
+		"dss_data8", NULL, NULL, "gpio_38",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_DATA9, 39,
+		"dss_data9", NULL, NULL, "gpio_39",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(DSS_HSYNC, 110,
+		"dss_hsync", NULL, NULL, "gpio_110",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_113, 113,
+		"gpio_113", "mcbsp2_clkx", NULL, "gpio_113",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_114, 114,
+		"gpio_114", "mcbsp2_fsx", NULL, "gpio_114",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_115, 115,
+		"gpio_115", "mcbsp2_dr", NULL, "gpio_115",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_116, 116,
+		"gpio_116", "mcbsp2_dx", NULL, "gpio_116",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_128, 128,
+		"gpio_128", NULL, "sti_din", "gpio_128",
+		NULL, "sys_boot0", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_129, 129,
+		"gpio_129", NULL, "sti_dout", "gpio_129",
+		NULL, "sys_boot1", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_130, 130,
+		"gpio_130", NULL, NULL, "gpio_130",
+		"jtag_emu2", "sys_boot2", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_131, 131,
+		"gpio_131", NULL, NULL, "gpio_131",
+		"jtag_emu3", "sys_boot3", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_132, 132,
+		"gpio_132", NULL, NULL, "gpio_132",
+		NULL, "sys_boot4", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_133, 133,
+		"gpio_133", NULL, NULL, "gpio_133",
+		NULL, "sys_boot5", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_134, 134,
+		"gpio_134", "ccp_datn", NULL, "gpio_134",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_135, 135,
+		"gpio_135", "ccp_datp", NULL, "gpio_135",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_136, 136,
+		"gpio_136", "ccp_clkn", NULL, "gpio_136",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_137, 137,
+		"gpio_137", "ccp_clkp", NULL, "gpio_137",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_138, 138,
+		"gpio_138", "spi3_clk", NULL, "gpio_138",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_139, 139,
+		"gpio_139", "spi3_cs0", "sys_ndmareq3", "gpio_139",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_140, 140,
+		"gpio_140", "spi3_simo", "sys_ndmareq4", "gpio_140",
+		NULL, NULL, "etk_d14", "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_141, 141,
+		"gpio_141", "spi3_somi", NULL, "gpio_141",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_142, 142,
+		"gpio_142", "spi3_cs1", "sys_ndmareq2", "gpio_142",
+		NULL, NULL, "etk_d15", "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_148, 148,
+		"gpio_148", "mcbsp5_fsx", NULL, "gpio_148",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_149, 149,
+		"gpio_149", "mcbsp5_dx", NULL, "gpio_149",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_150, 150,
+		"gpio_150", "mcbsp5_dr", NULL, "gpio_150",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_151, 151,
+		"gpio_151", "sys_pwrok", NULL, "gpio_151",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_152, 152,
+		"gpio_152", "uart1_cts", "sys_ndmareq1", "gpio_152",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_153, 153,
+		"gpio_153", "uart1_rx", "sys_ndmareq0", "gpio_153",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_154, 154,
+		"gpio_154", "mcbsp5_clkx", NULL, "gpio_154",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_63, 63,
+		"gpio_63", "mcbsp4_clkx", NULL, "gpio_63",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_78, 78,
+		"gpio_78", NULL, "uart2_rts", "gpio_78",
+		"uart3_rts_sd", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_79, 79,
+		"gpio_79", "secure_indicator", "uart2_tx", "gpio_79",
+		"uart3_tx_irtx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_7, 7,
+		"gpio_7", NULL, "uart2_cts", "gpio_7",
+		"uart3_cts_rctx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPIO_80, 80,
+		"gpio_80", NULL, "uart2_rx", "gpio_80",
+		"uart3_rx_irrx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A10, 3,
+		"gpmc_a10", NULL, "sys_ndmareq0", "gpio_3",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A1, 31,
+		"gpmc_a1", NULL, NULL, "gpio_31",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A2, 30,
+		"gpmc_a2", NULL, NULL, "gpio_30",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A3, 29,
+		"gpmc_a3", NULL, NULL, "gpio_29",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A4, 49,
+		"gpmc_a4", NULL, NULL, "gpio_49",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A5, 53,
+		"gpmc_a5", NULL, NULL, "gpio_53",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A6, 52,
+		"gpmc_a6", NULL, NULL, "gpio_52",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A7, 6,
+		"gpmc_a7", NULL, NULL, "gpio_6",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A8, 5,
+		"gpmc_a8", NULL, NULL, "gpio_5",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_A9, 4,
+		"gpmc_a9", NULL, "sys_ndmareq1", "gpio_4",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_CLK, 21,
+		"gpmc_clk", NULL, NULL, "gpio_21",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D10, 18,
+		"gpmc_d10", NULL, NULL, "gpio_18",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D11, 57,
+		"gpmc_d11", NULL, NULL, "gpio_57",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D12, 77,
+		"gpmc_d12", NULL, NULL, "gpio_77",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D13, 76,
+		"gpmc_d13", NULL, NULL, "gpio_76",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D14, 55,
+		"gpmc_d14", NULL, NULL, "gpio_55",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D15, 54,
+		"gpmc_d15", NULL, NULL, "gpio_54",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D8, 20,
+		"gpmc_d8", NULL, NULL, "gpio_20",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_D9, 19,
+		"gpmc_d9", NULL, NULL, "gpio_19",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS1, 22,
+		"gpmc_ncs1", NULL, NULL, "gpio_22",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS2, 23,
+		"gpmc_ncs2", NULL, NULL, "gpio_23",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS3, 24,
+		"gpmc_ncs3", "gpmc_io_dir", NULL, "gpio_24",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS4, 25,
+		"gpmc_ncs4", NULL, NULL, "gpio_25",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS5, 26,
+		"gpmc_ncs5", NULL, NULL, "gpio_26",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS6, 27,
+		"gpmc_ncs6", NULL, NULL, "gpio_27",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_NCS7, 28,
+		"gpmc_ncs7", "gpmc_io_dir", NULL, "gpio_28",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_WAIT1, 33,
+		"gpmc_wait1", NULL, NULL, "gpio_33",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_WAIT2, 34,
+		"gpmc_wait2", NULL, NULL, "gpio_34",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(GPMC_WAIT3, 35,
+		"gpmc_wait3", NULL, NULL, "gpio_35",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(HDQ_SIO, 101,
+		"hdq_sio", "usb2_tllse0", "sys_altclk", "gpio_101",
+		"uart3_rx_irrx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C1_SCL, 50,
+		"i2c1_scl", NULL, NULL, "gpio_50",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C1_SDA, 51,
+		"i2c1_sda", NULL, NULL, "gpio_51",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C2_SCL, 99,
+		"i2c2_scl", NULL, NULL, "gpio_99",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(I2C2_SDA, 100,
+		"i2c2_sda", NULL, NULL, "gpio_100",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(JTAG_EMU0, 127,
+		"jtag_emu0", "secure_indicator", NULL, "gpio_127",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(JTAG_EMU1, 126,
+		"jtag_emu1", NULL, NULL, "gpio_126",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_CLKR, 92,
+		"mcbsp1_clkr", "ssi2_dat_tx", NULL, "gpio_92",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_CLKX, 98,
+		"mcbsp1_clkx", "ssi2_wake", NULL, "gpio_98",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_DR, 95,
+		"mcbsp1_dr", "ssi2_dat_rx", NULL, "gpio_95",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_DX, 94,
+		"mcbsp1_dx", "ssi2_rdy_tx", NULL, "gpio_94",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_FSR, 93,
+		"mcbsp1_fsr", "ssi2_flag_tx", NULL, "gpio_93",
+		"spi2_cs1", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP1_FSX, 97,
+		"mcbsp1_fsx", "ssi2_rdy_rx", NULL, "gpio_97",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP2_CLKX, 147,
+		"mcbsp2_clkx", "sdi_clkp", "dss_data23", "gpio_147",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP2_DR, 144,
+		"mcbsp2_dr", "sdi_clkn", "dss_data22", "gpio_144",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_CLKX, 71,
+		"mcbsp3_clkx", NULL, NULL, "gpio_71",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_DR, 73,
+		"mcbsp3_dr", NULL, NULL, "gpio_73",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_DX, 74,
+		"mcbsp3_dx", NULL, "sti_clk", "gpio_74",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP3_FSX, 72,
+		"mcbsp3_fsx", NULL, NULL, "gpio_72",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(MCBSP_CLKS, 96,
+		"mcbsp_clks", "ssi2_flag_rx", NULL, "gpio_96",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_CLKO, 0,
+		"sdmmc1_clko", "ms_clko", NULL, NULL,
+		NULL, "hw_dbg9", "hw_dbg3", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_CMD, 0,
+		"sdmmc1_cmd", "ms_bs", NULL, NULL,
+		NULL, "hw_dbg8", "hw_dbg2", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT0, 0,
+		"sdmmc1_dat0", "ms_dat0", NULL, NULL,
+		NULL, "hw_dbg7", "hw_dbg1", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT1, 75,
+		"sdmmc1_dat1", "ms_dat1", NULL, "gpio_75",
+		NULL, "hw_dbg6", "hw_dbg0", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT2, 0,
+		"sdmmc1_dat2", "ms_dat2", NULL, NULL,
+		NULL, "hw_dbg5", "hw_dbg10", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC1_DAT3, 0,
+		"sdmmc1_dat3", "ms_dat3", NULL, NULL,
+		NULL, "hw_dbg4", "hw_dbg11", "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_CLKO, 13,
+		"sdmmc2_clko", NULL, NULL, "gpio_13",
+		NULL, "spi3_clk", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_CMD, 15,
+		"sdmmc2_cmd", "usb2_rcv", NULL, "gpio_15",
+		NULL, "spi3_simo", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT0, 16,
+		"sdmmc2_dat0", "usb2_tllse0", NULL, "gpio_16",
+		NULL, "spi3_somi", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT1, 58,
+		"sdmmc2_dat1", "usb2_txen", NULL, "gpio_58",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT2, 17,
+		"sdmmc2_dat2", "usb2_dat", NULL, "gpio_17",
+		NULL, "spi3_cs1", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDMMC2_DAT3, 14,
+		"sdmmc2_dat3", "usb2_se0", NULL, "gpio_14",
+		NULL, "spi3_cs0", NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_A12, 2,
+		"sdrc_a12", NULL, NULL, "gpio_2",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_A13, 1,
+		"sdrc_a13", NULL, NULL, "gpio_1",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_A14, 0,
+		"sdrc_a14", NULL, NULL, "gpio_0",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_CKE1, 36,
+		"sdrc_cke1", NULL, NULL, "gpio_36",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SDRC_NCS1, 37,
+		"sdrc_ncs1", NULL, NULL, "gpio_37",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CLK, 81,
+		"spi1_clk", NULL, NULL, "gpio_81",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS0, 84,
+		"spi1_cs0", NULL, NULL, "gpio_84",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS1, 85,
+		"spi1_cs1", NULL, NULL, "gpio_85",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS2, 86,
+		"spi1_cs2", NULL, NULL, "gpio_86",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_CS3, 87,
+		"spi1_cs3", "spi2_cs1", NULL, "gpio_87",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_SIMO, 82,
+		"spi1_simo", NULL, NULL, "gpio_82",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI1_SOMI, 83,
+		"spi1_somi", NULL, NULL, "gpio_83",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_CLK, 88,
+		"spi2_clk", "gpt9_pwm_evt", NULL, "gpio_88",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_CS0, 91,
+		"spi2_cs0", "gpt12_pwm_evt", NULL, "gpio_91",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_SIMO, 89,
+		"spi2_simo", "gpt10_pwm_evt", NULL, "gpio_89",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SPI2_SOMI, 90,
+		"spi2_somi", "gpt11_pwm_evt", NULL, "gpio_90",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_DAT_RX, 62,
+		"ssi1_dat_rx", "uart1_rx", "usb1_dat", "gpio_62",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_DAT_TX, 59,
+		"ssi1_dat_tx", "uart1_tx", "usb1_se0", "gpio_59",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_FLAG_RX, 64,
+		"ssi1_flag_rx", "mcbsp4_dr", NULL, "gpio_64",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_FLAG_TX, 60,
+		"ssi1_flag_tx", "uart1_rts", "usb1_rcv", "gpio_60",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_RDY_RX, 65,
+		"ssi1_rdy_rx", "mcbsp4_dx", NULL, "gpio_65",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_RDY_TX, 61,
+		"ssi1_rdy_tx", "uart1_cts", "usb1_txen", "gpio_61",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SSI1_WAKE, 66,
+		"ssi1_wake", "mcbsp4_fsx", NULL, "gpio_66",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_CLKOUT, 111,
+		"sys_clkout", NULL, NULL, "gpio_111",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_DRM_MSECURE, 118,
+		"sys_drm_msecure", NULL, "sys_ndmareq6", "gpio_118",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_NIRQ0, 56,
+		"sys_nirq0", NULL, NULL, "gpio_56",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(SYS_NIRQ1, 125,
+		"sys_nirq1", NULL, "sys_ndmareq5", "gpio_125",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_CTS, 32,
+		"uart1_cts", "sdi_vsync", "dss_data18", "gpio_32",
+		"mcbsp5_clkx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_RTS, 8,
+		"uart1_rts", "sdi_hsync", "dss_data19", "gpio_8",
+		"mcbsp5_fsx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_RX, 10,
+		"uart1_rx", "sdi_stp", "dss_data21", "gpio_10",
+		"mcbsp5_dr", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART1_TX, 9,
+		"uart1_tx", "sdi_den", "dss_data20", "gpio_9",
+		"mcbsp5_dx", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_CTS, 67,
+		"uart2_cts", "usb1_rcv", "gpt9_pwm_evt", "gpio_67",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_RTS, 68,
+		"uart2_rts", "usb1_txen", "gpt10_pwm_evt", "gpio_68",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_RX, 70,
+		"uart2_rx", "usb1_dat", "gpt12_pwm_evt", "gpio_70",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART2_TX, 69,
+		"uart2_tx", "usb1_se0", "gpt11_pwm_evt", "gpio_69",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_CTS_RCTX, 102,
+		"uart3_cts_rctx", "uart3_rx_irrx", NULL, "gpio_102",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_RTS_SD, 103,
+		"uart3_rts_sd", "uart3_tx_irtx", NULL, "gpio_103",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_RX_IRRX, 105,
+		"uart3_rx_irrx", NULL, NULL, "gpio_105",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(UART3_TX_IRTX, 104,
+		"uart3_tx_irtx", "uart3_cts_rctx", NULL, "gpio_104",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_CLK, 120,
+		"usb0hs_clk", NULL, NULL, "gpio_120",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA0, 0,
+		"usb0hs_data0", "uart3_tx_irtx", NULL, NULL,
+		"usb0_txen", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA1, 0,
+		"usb0hs_data1", "uart3_rx_irrx", NULL, NULL,
+		"usb0_dat", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA2, 0,
+		"usb0hs_data2", "uart3_rts_sd", NULL, NULL,
+		"usb0_se0", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA3, 106,
+		"usb0hs_data3", NULL, "uart3_cts_rctx", "gpio_106",
+		"usb0_puen", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA4, 107,
+		"usb0hs_data4", "mcbsp2_dr", NULL, "gpio_107",
+		"usb0_vp", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA5, 108,
+		"usb0hs_data5", "mcbsp2_dx", NULL, "gpio_108",
+		"usb0_vm", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA6, 109,
+		"usb0hs_data6", "mcbsp2_fsx", NULL, "gpio_109",
+		"usb0_rcv", NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DATA7, 124,
+		"usb0hs_data7", "mcbsp2_clkx", NULL, "gpio_124",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_DIR, 121,
+		"usb0hs_dir", NULL, NULL, "gpio_121",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_NXT, 123,
+		"usb0hs_nxt", NULL, NULL, "gpio_123",
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP2430_MUXENTRY(USB0HS_STP, 122,
+		"usb0hs_stp", NULL, NULL, "gpio_122",
+		NULL, NULL, NULL, "safe_mode"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for POP package
+ * 447-pin s-PBGA Package, 0.00mm Ball Pitch (Bottom)
+ */
+#ifdef CONFIG_DEBUG_FS
+struct omap_ball __initdata omap2430_pop_ball[] = {
+	_OMAP2430_BALLENTRY(CAM_D0, "t8", NULL),
+	_OMAP2430_BALLENTRY(CAM_D1, "t4", NULL),
+	_OMAP2430_BALLENTRY(CAM_D10, "r4", NULL),
+	_OMAP2430_BALLENTRY(CAM_D11, "w3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D2, "r2", NULL),
+	_OMAP2430_BALLENTRY(CAM_D3, "u3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D4, "u2", NULL),
+	_OMAP2430_BALLENTRY(CAM_D5, "v1", NULL),
+	_OMAP2430_BALLENTRY(CAM_D6, "t3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D7, "r3", NULL),
+	_OMAP2430_BALLENTRY(CAM_D8, "u7", NULL),
+	_OMAP2430_BALLENTRY(CAM_D9, "t7", NULL),
+	_OMAP2430_BALLENTRY(CAM_HS, "p2", NULL),
+	_OMAP2430_BALLENTRY(CAM_LCLK, "r7", NULL),
+	_OMAP2430_BALLENTRY(CAM_VS, "n2", NULL),
+	_OMAP2430_BALLENTRY(CAM_XCLK, "p3", NULL),
+	_OMAP2430_BALLENTRY(DSS_ACBIAS, "y3", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA0, "v8", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA1, "w1", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA10, "k25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA11, "j25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA12, "k24", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA13, "j24", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA14, "h25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA15, "g25", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA16, "ac3", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA17, "y7", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA2, "u8", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA3, "u4", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA4, "v3", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA5, "aa4", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA6, "w8", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA7, "y1", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA8, "aa2", NULL),
+	_OMAP2430_BALLENTRY(DSS_DATA9, "ab4", NULL),
+	_OMAP2430_BALLENTRY(DSS_HSYNC, "v2", NULL),
+	_OMAP2430_BALLENTRY(GPIO_113, "ad16", NULL),
+	_OMAP2430_BALLENTRY(GPIO_114, "ac10", NULL),
+	_OMAP2430_BALLENTRY(GPIO_115, "ad13", NULL),
+	_OMAP2430_BALLENTRY(GPIO_116, "ae15", NULL),
+	_OMAP2430_BALLENTRY(GPIO_128, "p1", NULL),
+	_OMAP2430_BALLENTRY(GPIO_129, "r1", NULL),
+	_OMAP2430_BALLENTRY(GPIO_130, "p7", NULL),
+	_OMAP2430_BALLENTRY(GPIO_131, "l8", NULL),
+	_OMAP2430_BALLENTRY(GPIO_132, "w24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_133, "aa24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_134, "ae12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_135, "ae11", NULL),
+	_OMAP2430_BALLENTRY(GPIO_136, "ad12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_137, "ad11", NULL),
+	_OMAP2430_BALLENTRY(GPIO_138, "y12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_139, "ad17", NULL),
+	_OMAP2430_BALLENTRY(GPIO_140, "l7", NULL),
+	_OMAP2430_BALLENTRY(GPIO_141, "ac24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_142, "m3", NULL),
+	_OMAP2430_BALLENTRY(GPIO_148, "af12", NULL),
+	_OMAP2430_BALLENTRY(GPIO_149, "k7", NULL),
+	_OMAP2430_BALLENTRY(GPIO_150, "m1", NULL),
+	_OMAP2430_BALLENTRY(GPIO_151, "ad14", NULL),
+	_OMAP2430_BALLENTRY(GPIO_152, "ad18", NULL),
+	_OMAP2430_BALLENTRY(GPIO_153, "u24", NULL),
+	_OMAP2430_BALLENTRY(GPIO_154, "ae16", NULL),
+	_OMAP2430_BALLENTRY(GPIO_63, "n3", NULL),
+	_OMAP2430_BALLENTRY(GPIO_7, "ac23", NULL),
+	_OMAP2430_BALLENTRY(GPIO_78, "ad10", NULL),
+	_OMAP2430_BALLENTRY(GPIO_79, "ae10", NULL),
+	_OMAP2430_BALLENTRY(GPIO_80, "ae13", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A1, "a9", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A10, "g12", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A2, "b8", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A3, "g10", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A4, "g11", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A5, "a10", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A6, "g13", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A7, "a6", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A8, "h1", NULL),
+	_OMAP2430_BALLENTRY(GPMC_A9, "c8", NULL),
+	_OMAP2430_BALLENTRY(GPMC_CLK, "n1", "l1"),
+	_OMAP2430_BALLENTRY(GPMC_D10, "d1", "n1"),
+	_OMAP2430_BALLENTRY(GPMC_D11, "d2", "p2"),
+	_OMAP2430_BALLENTRY(GPMC_D12, "e1", "p1"),
+	_OMAP2430_BALLENTRY(GPMC_D13, "e3", "m1"),
+	_OMAP2430_BALLENTRY(GPMC_D14, "c7", "j2"),
+	_OMAP2430_BALLENTRY(GPMC_D15, "f3", "k2"),
+	_OMAP2430_BALLENTRY(GPMC_D8, "e2", "r1"),
+	_OMAP2430_BALLENTRY(GPMC_D9, "ab1", "t1"),
+	_OMAP2430_BALLENTRY(GPMC_NCS1, "ac1", "w1"),
+	_OMAP2430_BALLENTRY(GPMC_NCS2, "c6", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS3, "b9", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS4, "b4", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS5, "a4", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS6, "f1", NULL),
+	_OMAP2430_BALLENTRY(GPMC_NCS7, "a7", NULL),
+	_OMAP2430_BALLENTRY(GPMC_WAIT1, "j1", "y8"),
+	_OMAP2430_BALLENTRY(GPMC_WAIT2, "b7", NULL),
+	_OMAP2430_BALLENTRY(GPMC_WAIT3, "g14", NULL),
+	_OMAP2430_BALLENTRY(HDQ_SIO, "h20", NULL),
+	_OMAP2430_BALLENTRY(I2C1_SCL, "y17", NULL),
+	_OMAP2430_BALLENTRY(I2C1_SDA, "ac19", NULL),
+	_OMAP2430_BALLENTRY(I2C2_SCL, "n7", NULL),
+	_OMAP2430_BALLENTRY(I2C2_SDA, "m4", NULL),
+	_OMAP2430_BALLENTRY(JTAG_EMU0, "e25", NULL),
+	_OMAP2430_BALLENTRY(JTAG_EMU1, "e24", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_CLKR, "ab2", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_CLKX, "y9", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_DR, "af3", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_DX, "aa1", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_FSR, "ad5", NULL),
+	_OMAP2430_BALLENTRY(MCBSP1_FSX, "ab3", NULL),
+	_OMAP2430_BALLENTRY(MCBSP2_CLKX, "j26", NULL),
+	_OMAP2430_BALLENTRY(MCBSP2_DR, "k26", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_CLKX, "ac9", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_DR, "ae2", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_DX, "af4", NULL),
+	_OMAP2430_BALLENTRY(MCBSP3_FSX, "ae4", NULL),
+	_OMAP2430_BALLENTRY(MCBSP_CLKS, "ad6", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_CLKO, "n23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_CMD, "l23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT0, "m24", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT1, "p23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT2, "t20", NULL),
+	_OMAP2430_BALLENTRY(SDMMC1_DAT3, "r20", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_CLKO, "v26", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_CMD, "w20", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT0, "v23", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT1, "y24", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT2, "v25", NULL),
+	_OMAP2430_BALLENTRY(SDMMC2_DAT3, "v24", NULL),
+	_OMAP2430_BALLENTRY(SDRC_A12, "w26", "r21"),
+	_OMAP2430_BALLENTRY(SDRC_A13, "af20", "aa15"),
+	_OMAP2430_BALLENTRY(SDRC_A14, "af16", "y12"),
+	_OMAP2430_BALLENTRY(SDRC_CKE1, "af15", "y13"),
+	_OMAP2430_BALLENTRY(SDRC_NCS1, "aa25", "t20"),
+	_OMAP2430_BALLENTRY(SPI1_CLK, "y18", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS0, "u1", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS1, "af19", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS2, "ae19", NULL),
+	_OMAP2430_BALLENTRY(SPI1_CS3, "h24", NULL),
+	_OMAP2430_BALLENTRY(SPI1_SIMO, "ad15", NULL),
+	_OMAP2430_BALLENTRY(SPI1_SOMI, "ae17", NULL),
+	_OMAP2430_BALLENTRY(SPI2_CLK, "y20", NULL),
+	_OMAP2430_BALLENTRY(SPI2_CS0, "y19", NULL),
+	_OMAP2430_BALLENTRY(SPI2_SIMO, "ac20", NULL),
+	_OMAP2430_BALLENTRY(SPI2_SOMI, "ad19", NULL),
+	_OMAP2430_BALLENTRY(SSI1_DAT_RX, "aa26", NULL),
+	_OMAP2430_BALLENTRY(SSI1_DAT_TX, "ad24", NULL),
+	_OMAP2430_BALLENTRY(SSI1_FLAG_RX, "ad23", NULL),
+	_OMAP2430_BALLENTRY(SSI1_FLAG_TX, "ab24", NULL),
+	_OMAP2430_BALLENTRY(SSI1_RDY_RX, "ab25", NULL),
+	_OMAP2430_BALLENTRY(SSI1_RDY_TX, "y25", NULL),
+	_OMAP2430_BALLENTRY(SSI1_WAKE, "ac25", NULL),
+	_OMAP2430_BALLENTRY(SYS_CLKOUT, "r25", NULL),
+	_OMAP2430_BALLENTRY(SYS_DRM_MSECURE, "ae3", NULL),
+	_OMAP2430_BALLENTRY(SYS_NIRQ0, "w25", NULL),
+	_OMAP2430_BALLENTRY(SYS_NIRQ1, "ad21", NULL),
+	_OMAP2430_BALLENTRY(UART1_CTS, "p24", NULL),
+	_OMAP2430_BALLENTRY(UART1_RTS, "p25", NULL),
+	_OMAP2430_BALLENTRY(UART1_RX, "n24", NULL),
+	_OMAP2430_BALLENTRY(UART1_TX, "r24", NULL),
+	_OMAP2430_BALLENTRY(UART2_CTS, "u25", NULL),
+	_OMAP2430_BALLENTRY(UART2_RTS, "t23", NULL),
+	_OMAP2430_BALLENTRY(UART2_RX, "t24", NULL),
+	_OMAP2430_BALLENTRY(UART2_TX, "u20", NULL),
+	_OMAP2430_BALLENTRY(UART3_CTS_RCTX, "m2", NULL),
+	_OMAP2430_BALLENTRY(UART3_RTS_SD, "k2", NULL),
+	_OMAP2430_BALLENTRY(UART3_RX_IRRX, "l3", NULL),
+	_OMAP2430_BALLENTRY(UART3_TX_IRTX, "l2", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_CLK, "ae8", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA0, "ad4", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA1, "ae6", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA2, "af9", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA3, "ad9", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA4, "y11", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA5, "ad7", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA6, "ae7", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DATA7, "ac7", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_DIR, "ad8", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_NXT, "ae9", NULL),
+	_OMAP2430_BALLENTRY(USB0HS_STP, "ae5", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap2430_pop_ball	 NULL
+#endif
+
+int __init omap2430_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+	struct omap_ball *package_balls = NULL;
+
+	switch (flags & OMAP_PACKAGE_MASK) {
+	case OMAP_PACKAGE_ZAC:
+		package_balls = omap2430_pop_ball;
+		break;
+	default:
+		pr_warning("mux: No ball data available for omap2420 package\n");
+	}
+
+	return omap_mux_init(OMAP2430_CONTROL_PADCONF_MUX_PBASE,
+			     OMAP2430_CONTROL_PADCONF_MUX_SIZE,
+				omap2430_muxmodes, NULL, board_subset,
+				package_balls);
+}

arch/arm/mach-omap2/mux2430.h

@@ -0,0 +1,370 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP2430_CONTROL_PADCONF_MUX_PBASE			0x49002030LU
+
+#define OMAP2430_MUX(mode0, mux_value)					\
+{									\
+	.reg_offset	= (OMAP2430_CONTROL_PADCONF_##mode0##_OFFSET),	\
+	.value		= (mux_value),					\
+}
+
+/*
+ * OMAP2430 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM.  Add 0x49002030 to these values to get the
+ * absolute addresses.  The name in the macro is the mode-0 name of
+ * the pin.  NOTE: These registers are 8-bits wide.
+ *
+ * Note that these defines use SDMMC instead of MMC for compability
+ * with signal names used in 3630.
+ */
+#define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET		0x000
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS0_OFFSET		0x001
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS1_OFFSET		0x002
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS2_OFFSET		0x003
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS3_OFFSET		0x004
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS4_OFFSET		0x005
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS5_OFFSET		0x006
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS6_OFFSET		0x007
+#define OMAP2430_CONTROL_PADCONF_GPMC_NCS7_OFFSET		0x008
+#define OMAP2430_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET		0x009
+#define OMAP2430_CONTROL_PADCONF_GPMC_NOE_NRE_OFFSET		0x00a
+#define OMAP2430_CONTROL_PADCONF_GPMC_NWE_OFFSET		0x00b
+#define OMAP2430_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET		0x00c
+#define OMAP2430_CONTROL_PADCONF_GPMC_NBE1_OFFSET		0x00d
+#define OMAP2430_CONTROL_PADCONF_GPMC_NWP_OFFSET		0x00e
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT0_OFFSET		0x00f
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT1_OFFSET		0x010
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT2_OFFSET		0x011
+#define OMAP2430_CONTROL_PADCONF_GPMC_WAIT3_OFFSET		0x012
+#define OMAP2430_CONTROL_PADCONF_SDRC_CLK_OFFSET		0x013
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCLK_OFFSET		0x014
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCS0_OFFSET		0x015
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCS1_OFFSET		0x016
+#define OMAP2430_CONTROL_PADCONF_SDRC_CKE0_OFFSET		0x017
+#define OMAP2430_CONTROL_PADCONF_SDRC_CKE1_OFFSET		0x018
+#define OMAP2430_CONTROL_PADCONF_SDRC_NRAS_OFFSET		0x019
+#define OMAP2430_CONTROL_PADCONF_SDRC_NCAS_OFFSET		0x01a
+#define OMAP2430_CONTROL_PADCONF_SDRC_NWE_OFFSET		0x01b
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM0_OFFSET		0x01c
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM1_OFFSET		0x01d
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM2_OFFSET		0x01e
+#define OMAP2430_CONTROL_PADCONF_SDRC_DM3_OFFSET		0x01f
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS0_OFFSET		0x020
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS1_OFFSET		0x021
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS2_OFFSET		0x022
+#define OMAP2430_CONTROL_PADCONF_SDRC_DQS3_OFFSET		0x023
+#define OMAP2430_CONTROL_PADCONF_SDRC_A14_OFFSET		0x024
+#define OMAP2430_CONTROL_PADCONF_SDRC_A13_OFFSET		0x025
+#define OMAP2430_CONTROL_PADCONF_SDRC_A12_OFFSET		0x026
+#define OMAP2430_CONTROL_PADCONF_SDRC_BA1_OFFSET		0x027
+#define OMAP2430_CONTROL_PADCONF_SDRC_BA0_OFFSET		0x028
+#define OMAP2430_CONTROL_PADCONF_SDRC_A11_OFFSET		0x029
+#define OMAP2430_CONTROL_PADCONF_SDRC_A10_OFFSET		0x02a
+#define OMAP2430_CONTROL_PADCONF_SDRC_A9_OFFSET			0x02b
+#define OMAP2430_CONTROL_PADCONF_SDRC_A8_OFFSET			0x02c
+#define OMAP2430_CONTROL_PADCONF_SDRC_A7_OFFSET			0x02d
+#define OMAP2430_CONTROL_PADCONF_SDRC_A6_OFFSET			0x02e
+#define OMAP2430_CONTROL_PADCONF_SDRC_A5_OFFSET			0x02f
+#define OMAP2430_CONTROL_PADCONF_SDRC_A4_OFFSET			0x030
+#define OMAP2430_CONTROL_PADCONF_SDRC_A3_OFFSET			0x031
+#define OMAP2430_CONTROL_PADCONF_SDRC_A2_OFFSET			0x032
+#define OMAP2430_CONTROL_PADCONF_SDRC_A1_OFFSET			0x033
+#define OMAP2430_CONTROL_PADCONF_SDRC_A0_OFFSET			0x034
+#define OMAP2430_CONTROL_PADCONF_SDRC_D31_OFFSET		0x035
+#define OMAP2430_CONTROL_PADCONF_SDRC_D30_OFFSET		0x036
+#define OMAP2430_CONTROL_PADCONF_SDRC_D29_OFFSET		0x037
+#define OMAP2430_CONTROL_PADCONF_SDRC_D28_OFFSET		0x038
+#define OMAP2430_CONTROL_PADCONF_SDRC_D27_OFFSET		0x039
+#define OMAP2430_CONTROL_PADCONF_SDRC_D26_OFFSET		0x03a
+#define OMAP2430_CONTROL_PADCONF_SDRC_D25_OFFSET		0x03b
+#define OMAP2430_CONTROL_PADCONF_SDRC_D24_OFFSET		0x03c
+#define OMAP2430_CONTROL_PADCONF_SDRC_D23_OFFSET		0x03d
+#define OMAP2430_CONTROL_PADCONF_SDRC_D22_OFFSET		0x03e
+#define OMAP2430_CONTROL_PADCONF_SDRC_D21_OFFSET		0x03f
+#define OMAP2430_CONTROL_PADCONF_SDRC_D20_OFFSET		0x040
+#define OMAP2430_CONTROL_PADCONF_SDRC_D19_OFFSET		0x041
+#define OMAP2430_CONTROL_PADCONF_SDRC_D18_OFFSET		0x042
+#define OMAP2430_CONTROL_PADCONF_SDRC_D17_OFFSET		0x043
+#define OMAP2430_CONTROL_PADCONF_SDRC_D16_OFFSET		0x044
+#define OMAP2430_CONTROL_PADCONF_SDRC_D15_OFFSET		0x045
+#define OMAP2430_CONTROL_PADCONF_SDRC_D14_OFFSET		0x046
+#define OMAP2430_CONTROL_PADCONF_SDRC_D13_OFFSET		0x047
+#define OMAP2430_CONTROL_PADCONF_SDRC_D12_OFFSET		0x048
+#define OMAP2430_CONTROL_PADCONF_SDRC_D11_OFFSET		0x049
+#define OMAP2430_CONTROL_PADCONF_SDRC_D10_OFFSET		0x04a
+#define OMAP2430_CONTROL_PADCONF_SDRC_D9_OFFSET			0x04b
+#define OMAP2430_CONTROL_PADCONF_SDRC_D8_OFFSET			0x04c
+#define OMAP2430_CONTROL_PADCONF_SDRC_D7_OFFSET			0x04d
+#define OMAP2430_CONTROL_PADCONF_SDRC_D6_OFFSET			0x04e
+#define OMAP2430_CONTROL_PADCONF_SDRC_D5_OFFSET			0x04f
+#define OMAP2430_CONTROL_PADCONF_SDRC_D4_OFFSET			0x050
+#define OMAP2430_CONTROL_PADCONF_SDRC_D3_OFFSET			0x051
+#define OMAP2430_CONTROL_PADCONF_SDRC_D2_OFFSET			0x052
+#define OMAP2430_CONTROL_PADCONF_SDRC_D1_OFFSET			0x053
+#define OMAP2430_CONTROL_PADCONF_SDRC_D0_OFFSET			0x054
+#define OMAP2430_CONTROL_PADCONF_GPMC_A10_OFFSET		0x055
+#define OMAP2430_CONTROL_PADCONF_GPMC_A9_OFFSET			0x056
+#define OMAP2430_CONTROL_PADCONF_GPMC_A8_OFFSET			0x057
+#define OMAP2430_CONTROL_PADCONF_GPMC_A7_OFFSET			0x058
+#define OMAP2430_CONTROL_PADCONF_GPMC_A6_OFFSET			0x059
+#define OMAP2430_CONTROL_PADCONF_GPMC_A5_OFFSET			0x05a
+#define OMAP2430_CONTROL_PADCONF_GPMC_A4_OFFSET			0x05b
+#define OMAP2430_CONTROL_PADCONF_GPMC_A3_OFFSET			0x05c
+#define OMAP2430_CONTROL_PADCONF_GPMC_A2_OFFSET			0x05d
+#define OMAP2430_CONTROL_PADCONF_GPMC_A1_OFFSET			0x05e
+#define OMAP2430_CONTROL_PADCONF_GPMC_D15_OFFSET		0x05f
+#define OMAP2430_CONTROL_PADCONF_GPMC_D14_OFFSET		0x060
+#define OMAP2430_CONTROL_PADCONF_GPMC_D13_OFFSET		0x061
+#define OMAP2430_CONTROL_PADCONF_GPMC_D12_OFFSET		0x062
+#define OMAP2430_CONTROL_PADCONF_GPMC_D11_OFFSET		0x063
+#define OMAP2430_CONTROL_PADCONF_GPMC_D10_OFFSET		0x064
+#define OMAP2430_CONTROL_PADCONF_GPMC_D9_OFFSET			0x065
+#define OMAP2430_CONTROL_PADCONF_GPMC_D8_OFFSET			0x066
+#define OMAP2430_CONTROL_PADCONF_GPMC_D7_OFFSET			0x067
+#define OMAP2430_CONTROL_PADCONF_GPMC_D6_OFFSET			0x068
+#define OMAP2430_CONTROL_PADCONF_GPMC_D5_OFFSET			0x069
+#define OMAP2430_CONTROL_PADCONF_GPMC_D4_OFFSET			0x06a
+#define OMAP2430_CONTROL_PADCONF_GPMC_D3_OFFSET			0x06b
+#define OMAP2430_CONTROL_PADCONF_GPMC_D2_OFFSET			0x06c
+#define OMAP2430_CONTROL_PADCONF_GPMC_D1_OFFSET			0x06d
+#define OMAP2430_CONTROL_PADCONF_GPMC_D0_OFFSET			0x06e
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA0_OFFSET		0x06f
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA1_OFFSET		0x070
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA2_OFFSET		0x071
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA3_OFFSET		0x072
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA4_OFFSET		0x073
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA5_OFFSET		0x074
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA6_OFFSET		0x075
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA7_OFFSET		0x076
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA8_OFFSET		0x077
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA9_OFFSET		0x078
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA10_OFFSET		0x079
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA11_OFFSET		0x07a
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA12_OFFSET		0x07b
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA13_OFFSET		0x07c
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA14_OFFSET		0x07d
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA15_OFFSET		0x07e
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA16_OFFSET		0x07f
+#define OMAP2430_CONTROL_PADCONF_DSS_DATA17_OFFSET		0x080
+#define OMAP2430_CONTROL_PADCONF_UART1_CTS_OFFSET		0x081
+#define OMAP2430_CONTROL_PADCONF_UART1_RTS_OFFSET		0x082
+#define OMAP2430_CONTROL_PADCONF_UART1_TX_OFFSET		0x083
+#define OMAP2430_CONTROL_PADCONF_UART1_RX_OFFSET		0x084
+#define OMAP2430_CONTROL_PADCONF_MCBSP2_DR_OFFSET		0x085
+#define OMAP2430_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET		0x086
+#define OMAP2430_CONTROL_PADCONF_DSS_PCLK_OFFSET		0x087
+#define OMAP2430_CONTROL_PADCONF_DSS_VSYNC_OFFSET		0x088
+#define OMAP2430_CONTROL_PADCONF_DSS_HSYNC_OFFSET		0x089
+#define OMAP2430_CONTROL_PADCONF_DSS_ACBIAS_OFFSET		0x08a
+#define OMAP2430_CONTROL_PADCONF_SYS_NRESPWRON_OFFSET		0x08b
+#define OMAP2430_CONTROL_PADCONF_SYS_NRESWARM_OFFSET		0x08c
+#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ0_OFFSET		0x08d
+#define OMAP2430_CONTROL_PADCONF_SYS_NIRQ1_OFFSET		0x08e
+#define OMAP2430_CONTROL_PADCONF_SYS_VMODE_OFFSET		0x08f
+#define OMAP2430_CONTROL_PADCONF_GPIO_128_OFFSET		0x090
+#define OMAP2430_CONTROL_PADCONF_GPIO_129_OFFSET		0x091
+#define OMAP2430_CONTROL_PADCONF_GPIO_130_OFFSET		0x092
+#define OMAP2430_CONTROL_PADCONF_GPIO_131_OFFSET		0x093
+#define OMAP2430_CONTROL_PADCONF_SYS_32K_OFFSET			0x094
+#define OMAP2430_CONTROL_PADCONF_SYS_XTALIN_OFFSET		0x095
+#define OMAP2430_CONTROL_PADCONF_SYS_XTALOUT_OFFSET		0x096
+#define OMAP2430_CONTROL_PADCONF_GPIO_132_OFFSET		0x097
+#define OMAP2430_CONTROL_PADCONF_SYS_CLKREQ_OFFSET		0x098
+#define OMAP2430_CONTROL_PADCONF_SYS_CLKOUT_OFFSET		0x099
+#define OMAP2430_CONTROL_PADCONF_GPIO_151_OFFSET		0x09a
+#define OMAP2430_CONTROL_PADCONF_GPIO_133_OFFSET		0x09b
+#define OMAP2430_CONTROL_PADCONF_JTAG_EMU1_OFFSET		0x09c
+#define OMAP2430_CONTROL_PADCONF_JTAG_EMU0_OFFSET		0x09d
+#define OMAP2430_CONTROL_PADCONF_JTAG_NTRST_OFFSET		0x09e
+#define OMAP2430_CONTROL_PADCONF_JTAG_TCK_OFFSET		0x09f
+#define OMAP2430_CONTROL_PADCONF_JTAG_RTCK_OFFSET		0x0a0
+#define OMAP2430_CONTROL_PADCONF_JTAG_TMS_OFFSET		0x0a1
+#define OMAP2430_CONTROL_PADCONF_JTAG_TDI_OFFSET		0x0a2
+#define OMAP2430_CONTROL_PADCONF_JTAG_TDO_OFFSET		0x0a3
+#define OMAP2430_CONTROL_PADCONF_CAM_D9_OFFSET			0x0a4
+#define OMAP2430_CONTROL_PADCONF_CAM_D8_OFFSET			0x0a5
+#define OMAP2430_CONTROL_PADCONF_CAM_D7_OFFSET			0x0a6
+#define OMAP2430_CONTROL_PADCONF_CAM_D6_OFFSET			0x0a7
+#define OMAP2430_CONTROL_PADCONF_CAM_D5_OFFSET			0x0a8
+#define OMAP2430_CONTROL_PADCONF_CAM_D4_OFFSET			0x0a9
+#define OMAP2430_CONTROL_PADCONF_CAM_D3_OFFSET			0x0aa
+#define OMAP2430_CONTROL_PADCONF_CAM_D2_OFFSET			0x0ab
+#define OMAP2430_CONTROL_PADCONF_CAM_D1_OFFSET			0x0ac
+#define OMAP2430_CONTROL_PADCONF_CAM_D0_OFFSET			0x0ad
+#define OMAP2430_CONTROL_PADCONF_CAM_HS_OFFSET			0x0ae
+#define OMAP2430_CONTROL_PADCONF_CAM_VS_OFFSET			0x0af
+#define OMAP2430_CONTROL_PADCONF_CAM_LCLK_OFFSET		0x0b0
+#define OMAP2430_CONTROL_PADCONF_CAM_XCLK_OFFSET		0x0b1
+#define OMAP2430_CONTROL_PADCONF_CAM_D11_OFFSET			0x0b2
+#define OMAP2430_CONTROL_PADCONF_CAM_D10_OFFSET			0x0b3
+#define OMAP2430_CONTROL_PADCONF_GPIO_134_OFFSET		0x0b4
+#define OMAP2430_CONTROL_PADCONF_GPIO_135_OFFSET		0x0b5
+#define OMAP2430_CONTROL_PADCONF_GPIO_136_OFFSET		0x0b6
+#define OMAP2430_CONTROL_PADCONF_GPIO_137_OFFSET		0x0b7
+#define OMAP2430_CONTROL_PADCONF_GPIO_138_OFFSET		0x0b8
+#define OMAP2430_CONTROL_PADCONF_GPIO_139_OFFSET		0x0b9
+#define OMAP2430_CONTROL_PADCONF_GPIO_140_OFFSET		0x0ba
+#define OMAP2430_CONTROL_PADCONF_GPIO_141_OFFSET		0x0bb
+#define OMAP2430_CONTROL_PADCONF_GPIO_142_OFFSET		0x0bc
+#define OMAP2430_CONTROL_PADCONF_GPIO_154_OFFSET		0x0bd
+#define OMAP2430_CONTROL_PADCONF_GPIO_148_OFFSET		0x0be
+#define OMAP2430_CONTROL_PADCONF_GPIO_149_OFFSET		0x0bf
+#define OMAP2430_CONTROL_PADCONF_GPIO_150_OFFSET		0x0c0
+#define OMAP2430_CONTROL_PADCONF_GPIO_152_OFFSET		0x0c1
+#define OMAP2430_CONTROL_PADCONF_GPIO_153_OFFSET		0x0c2
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_CLKO_OFFSET		0x0c3
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_CMD_OFFSET		0x0c4
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET		0x0c5
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET		0x0c6
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET		0x0c7
+#define OMAP2430_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET		0x0c8
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_CLKO_OFFSET		0x0c9
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET		0x0ca
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_CMD_OFFSET		0x0cb
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET		0x0cc
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET		0x0cd
+#define OMAP2430_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET		0x0ce
+#define OMAP2430_CONTROL_PADCONF_UART2_CTS_OFFSET		0x0cf
+#define OMAP2430_CONTROL_PADCONF_UART2_RTS_OFFSET		0x0d0
+#define OMAP2430_CONTROL_PADCONF_UART2_TX_OFFSET		0x0d1
+#define OMAP2430_CONTROL_PADCONF_UART2_RX_OFFSET		0x0d2
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET		0x0d3
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_FSX_OFFSET		0x0d4
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_DR_OFFSET		0x0d5
+#define OMAP2430_CONTROL_PADCONF_MCBSP3_DX_OFFSET		0x0d6
+#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_TX_OFFSET		0x0d7
+#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_TX_OFFSET		0x0d8
+#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_TX_OFFSET		0x0d9
+#define OMAP2430_CONTROL_PADCONF_SSI1_DAT_RX_OFFSET		0x0da
+#define OMAP2430_CONTROL_PADCONF_GPIO_63_OFFSET			0x0db
+#define OMAP2430_CONTROL_PADCONF_SSI1_FLAG_RX_OFFSET		0x0dc
+#define OMAP2430_CONTROL_PADCONF_SSI1_RDY_RX_OFFSET		0x0dd
+#define OMAP2430_CONTROL_PADCONF_SSI1_WAKE_OFFSET		0x0de
+#define OMAP2430_CONTROL_PADCONF_SPI1_CLK_OFFSET		0x0df
+#define OMAP2430_CONTROL_PADCONF_SPI1_SIMO_OFFSET		0x0e0
+#define OMAP2430_CONTROL_PADCONF_SPI1_SOMI_OFFSET		0x0e1
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS0_OFFSET		0x0e2
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS1_OFFSET		0x0e3
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS2_OFFSET		0x0e4
+#define OMAP2430_CONTROL_PADCONF_SPI1_CS3_OFFSET		0x0e5
+#define OMAP2430_CONTROL_PADCONF_SPI2_CLK_OFFSET		0x0e6
+#define OMAP2430_CONTROL_PADCONF_SPI2_SIMO_OFFSET		0x0e7
+#define OMAP2430_CONTROL_PADCONF_SPI2_SOMI_OFFSET		0x0e8
+#define OMAP2430_CONTROL_PADCONF_SPI2_CS0_OFFSET		0x0e9
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET		0x0ea
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSR_OFFSET		0x0eb
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_DX_OFFSET		0x0ec
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_DR_OFFSET		0x0ed
+#define OMAP2430_CONTROL_PADCONF_MCBSP_CLKS_OFFSET		0x0ee
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_FSX_OFFSET		0x0ef
+#define OMAP2430_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET		0x0f0
+#define OMAP2430_CONTROL_PADCONF_I2C1_SCL_OFFSET		0x0f1
+#define OMAP2430_CONTROL_PADCONF_I2C1_SDA_OFFSET		0x0f2
+#define OMAP2430_CONTROL_PADCONF_I2C2_SCL_OFFSET		0x0f3
+#define OMAP2430_CONTROL_PADCONF_I2C2_SDA_OFFSET		0x0f4
+#define OMAP2430_CONTROL_PADCONF_HDQ_SIO_OFFSET			0x0f5
+#define OMAP2430_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET		0x0f6
+#define OMAP2430_CONTROL_PADCONF_UART3_RTS_SD_OFFSET		0x0f7
+#define OMAP2430_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET		0x0f8
+#define OMAP2430_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET		0x0f9
+#define OMAP2430_CONTROL_PADCONF_GPIO_7_OFFSET			0x0fa
+#define OMAP2430_CONTROL_PADCONF_GPIO_78_OFFSET			0x0fb
+#define OMAP2430_CONTROL_PADCONF_GPIO_79_OFFSET			0x0fc
+#define OMAP2430_CONTROL_PADCONF_GPIO_80_OFFSET			0x0fd
+#define OMAP2430_CONTROL_PADCONF_GPIO_113_OFFSET		0x0fe
+#define OMAP2430_CONTROL_PADCONF_GPIO_114_OFFSET		0x0ff
+#define OMAP2430_CONTROL_PADCONF_GPIO_115_OFFSET		0x100
+#define OMAP2430_CONTROL_PADCONF_GPIO_116_OFFSET		0x101
+#define OMAP2430_CONTROL_PADCONF_SYS_DRM_MSECURE_OFFSET		0x102
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA3_OFFSET		0x103
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA4_OFFSET		0x104
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA5_OFFSET		0x105
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA6_OFFSET		0x106
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA2_OFFSET		0x107
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA0_OFFSET		0x108
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA1_OFFSET		0x109
+#define OMAP2430_CONTROL_PADCONF_USB0HS_CLK_OFFSET		0x10a
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DIR_OFFSET		0x10b
+#define OMAP2430_CONTROL_PADCONF_USB0HS_STP_OFFSET		0x10c
+#define OMAP2430_CONTROL_PADCONF_USB0HS_NXT_OFFSET		0x10d
+#define OMAP2430_CONTROL_PADCONF_USB0HS_DATA7_OFFSET		0x10e
+#define OMAP2430_CONTROL_PADCONF_TV_OUT_OFFSET			0x10f
+#define OMAP2430_CONTROL_PADCONF_TV_VREF_OFFSET			0x110
+#define OMAP2430_CONTROL_PADCONF_TV_RSET_OFFSET			0x111
+#define OMAP2430_CONTROL_PADCONF_TV_VFB_OFFSET			0x112
+#define OMAP2430_CONTROL_PADCONF_TV_DACOUT_OFFSET		0x113
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD0_OFFSET		0x114
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD1_OFFSET		0x115
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD2_OFFSET		0x116
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD3_OFFSET		0x117
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD4_OFFSET		0x118
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD5_OFFSET		0x119
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD6_OFFSET		0x11a
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD7_OFFSET		0x11b
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD8_OFFSET		0x11c
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD9_OFFSET		0x11d
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD10_OFFSET		0x11e
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD11_OFFSET		0x11f
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD12_OFFSET		0x120
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD13_OFFSET		0x121
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD14_OFFSET		0x122
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD15_OFFSET		0x123
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD16_OFFSET		0x124
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD17_OFFSET		0x125
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD18_OFFSET		0x126
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD19_OFFSET		0x127
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD20_OFFSET		0x128
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD21_OFFSET		0x129
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD22_OFFSET		0x12a
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD23_OFFSET		0x12b
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD24_OFFSET		0x12c
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD25_OFFSET		0x12d
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD26_OFFSET		0x12e
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD27_OFFSET		0x12f
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD28_OFFSET		0x130
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD29_OFFSET		0x131
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD30_OFFSET		0x132
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD31_OFFSET		0x133
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD32_OFFSET		0x134
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD33_OFFSET		0x135
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD34_OFFSET		0x136
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD35_OFFSET		0x137
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD36_OFFSET		0x138
+#define OMAP2430_CONTROL_PADCONF_AD2DMCAD37_OFFSET		0x139
+#define OMAP2430_CONTROL_PADCONF_AD2DMWRITE_OFFSET		0x13a
+#define OMAP2430_CONTROL_PADCONF_D2DCLK26MI_OFFSET		0x13b
+#define OMAP2430_CONTROL_PADCONF_D2DNRESPWRON1_OFFSET		0x13c
+#define OMAP2430_CONTROL_PADCONF_D2DNRESWARM_OFFSET		0x13d
+#define OMAP2430_CONTROL_PADCONF_D2DARM9NIRQ_OFFSET		0x13e
+#define OMAP2430_CONTROL_PADCONF_D2DUMA2P6FIQ_OFFSET		0x13f
+#define OMAP2430_CONTROL_PADCONF_D2DSPINT_OFFSET		0x140
+#define OMAP2430_CONTROL_PADCONF_D2DFRINT_OFFSET		0x141
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ0_OFFSET		0x142
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ1_OFFSET		0x143
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ2_OFFSET		0x144
+#define OMAP2430_CONTROL_PADCONF_D2DDMAREQ3_OFFSET		0x145
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTRST_OFFSET		0x146
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTDI_OFFSET		0x147
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTDO_OFFSET		0x148
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTMS_OFFSET		0x149
+#define OMAP2430_CONTROL_PADCONF_D2DN3GTCK_OFFSET		0x14a
+#define OMAP2430_CONTROL_PADCONF_D2DN3GRTCK_OFFSET		0x14b
+#define OMAP2430_CONTROL_PADCONF_D2DMSTDBY_OFFSET		0x14c
+#define OMAP2430_CONTROL_PADCONF_AD2DSREAD_OFFSET		0x14d
+#define OMAP2430_CONTROL_PADCONF_D2DSWAKEUP_OFFSET		0x14e
+#define OMAP2430_CONTROL_PADCONF_D2DIDLEREQ_OFFSET		0x14f
+#define OMAP2430_CONTROL_PADCONF_D2DIDLEACK_OFFSET		0x150
+#define OMAP2430_CONTROL_PADCONF_D2DSPARE0_OFFSET		0x151
+#define OMAP2430_CONTROL_PADCONF_AD2DSWRITE_OFFSET		0x152
+#define OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET		0x153
+
+#define OMAP2430_CONTROL_PADCONF_MUX_SIZE			\
+		(OMAP2430_CONTROL_PADCONF_AD2DMREAD_OFFSET + 0x1)

arch/arm/mach-omap2/mux34xx.c

@@ -2032,19 +2032,19 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
 	struct omap_ball *package_balls;
 
 	switch (flags & OMAP_PACKAGE_MASK) {
-	case (OMAP_PACKAGE_CBC):
+	case OMAP_PACKAGE_CBC:
 		package_subset = omap3_cbc_subset;
 		package_balls = omap3_cbc_ball;
 		break;
-	case (OMAP_PACKAGE_CBB):
+	case OMAP_PACKAGE_CBB:
 		package_subset = omap3_cbb_subset;
 		package_balls = omap3_cbb_ball;
 		break;
-	case (OMAP_PACKAGE_CUS):
+	case OMAP_PACKAGE_CUS:
 		package_subset = omap3_cus_subset;
 		package_balls = omap3_cus_ball;
 		break;
-	case (OMAP_PACKAGE_CBP):
+	case OMAP_PACKAGE_CBP:
 		package_subset = omap36xx_cbp_subset;
 		package_balls = omap36xx_cbp_ball;
 		break;

arch/arm/mach-omap2/omap-headsmp.S

@@ -47,19 +47,3 @@ hold:	ldr	r12,=0x103
 	b	secondary_startup
 END(omap_secondary_startup)
 
-
-ENTRY(omap_modify_auxcoreboot0)
-	stmfd   sp!, {r1-r12, lr}
-	ldr	r12, =0x104
-	dsb
-	smc	#0
-	ldmfd   sp!, {r1-r12, pc}
-END(omap_modify_auxcoreboot0)
-
-ENTRY(omap_auxcoreboot_addr)
-	stmfd   sp!, {r2-r12, lr}
-	ldr	r12, =0x105
-	dsb
-	smc	#0
-	ldmfd   sp!, {r2-r12, pc}
-END(omap_auxcoreboot_addr)

arch/arm/mach-omap2/omap-hotplug.c

@@ -0,0 +1,79 @@
+/*
+ * OMAP4 SMP cpu-hotplug support
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/completion.h>
+
+#include <asm/cacheflush.h>
+#include <mach/omap4-common.h>
+
+static DECLARE_COMPLETION(cpu_killed);
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return wait_for_completion_timeout(&cpu_killed, 5000);
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+	unsigned int this_cpu = hard_smp_processor_id();
+
+	if (cpu != this_cpu) {
+		pr_crit("platform_cpu_die running on %u, should be %u\n",
+			   this_cpu, cpu);
+		BUG();
+	}
+	pr_notice("CPU%u: shutdown\n", cpu);
+	complete(&cpu_killed);
+	flush_cache_all();
+	dsb();
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
+		printk(KERN_CRIT "Secure clear status failed\n");
+
+	for (;;) {
+		/*
+		 * Execute WFI
+		 */
+		do_wfi();
+
+		if (omap_read_auxcoreboot0() == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+		pr_debug("CPU%u: spurious wakeup call\n", cpu);
+	}
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}

arch/arm/mach-omap2/omap-iommu.c

@@ -59,7 +59,7 @@ static struct platform_device *omap3_iommu_pdev[NR_OMAP3_IOMMU_DEVICES];
 static struct iommu_device omap4_devices[] = {
 	{
 		.base = OMAP4_MMU1_BASE,
-		.irq = INT_44XX_DUCATI_MMU_IRQ,
+		.irq = OMAP44XX_IRQ_DUCATI_MMU,
 		.pdata = {
 			.name = "ducati",
 			.nr_tlb_entries = 32,