فهرست منبع

Merge branch 'pci/bjorn-disable-decode' into next

* pci/bjorn-disable-decode:
  PCI: disable MEM decoding while updating 64-bit MEM BARs
  PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
Bjorn Helgaas 13 سال پیش
والد
کامیت
d68e70c6e5
2فایلهای تغییر یافته به همراه21 افزوده شده و 3 حذف شده
  1. 3 3
      drivers/pci/probe.c
  2. 18 0
      drivers/pci/setup-res.c

+ 3 - 3
drivers/pci/probe.c

@@ -189,9 +189,6 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	pci_read_config_dword(dev, pos, &sz);
 	pci_write_config_dword(dev, pos, l);
 
-	if (!dev->mmio_always_on)
-		pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
-
 	/*
 	 * All bits set in sz means the device isn't working properly.
 	 * If the BAR isn't implemented, all bits must be 0.  If it's a
@@ -276,6 +273,9 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	}
 
  out:
+	if (!dev->mmio_always_on)
+		pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
+
 	return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
  fail:
 	res->flags = 0;

+ 18 - 0
drivers/pci/setup-res.c

@@ -30,6 +30,8 @@
 void pci_update_resource(struct pci_dev *dev, int resno)
 {
 	struct pci_bus_region region;
+	bool disable;
+	u16 cmd;
 	u32 new, check, mask;
 	int reg;
 	enum pci_bar_type type;
@@ -67,6 +69,18 @@ void pci_update_resource(struct pci_dev *dev, int resno)
 		new |= PCI_ROM_ADDRESS_ENABLE;
 	}
 
+	/*
+	 * We can't update a 64-bit BAR atomically, so when possible,
+	 * disable decoding so that a half-updated BAR won't conflict
+	 * with another device.
+	 */
+	disable = (res->flags & IORESOURCE_MEM_64) && !dev->mmio_always_on;
+	if (disable) {
+		pci_read_config_word(dev, PCI_COMMAND, &cmd);
+		pci_write_config_word(dev, PCI_COMMAND,
+				      cmd & ~PCI_COMMAND_MEMORY);
+	}
+
 	pci_write_config_dword(dev, reg, new);
 	pci_read_config_dword(dev, reg, &check);
 
@@ -84,6 +98,10 @@ void pci_update_resource(struct pci_dev *dev, int resno)
 			       "(high %#08x != %#08x)\n", resno, new, check);
 		}
 	}
+
+	if (disable)
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+
 	res->flags &= ~IORESOURCE_UNSET;
 	dev_dbg(&dev->dev, "BAR %d: set to %pR (PCI address [%#llx-%#llx])\n",
 		resno, res, (unsigned long long)region.start,