Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull net into net-next to get the synchronize_net() bug fix in
bonding.

Signed-off-by: David S. Miller <davem@davemloft.net>

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -54,7 +54,7 @@
 		};
 
 		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins2>;
+			pinctrl-0 = <&sdio_pins3>;
 			pinctrl-names = "default";
 			status = "okay";
 			/*

arch/arm/boot/dts/armada-370.dtsi

@@ -59,6 +59,12 @@
 					     "mpp50", "mpp51", "mpp52";
 			      marvell,function = "sd0";
 			};
+
+			sdio_pins3: sdio-pins3 {
+			      marvell,pins = "mpp48", "mpp49", "mpp50",
+					     "mpp51", "mpp52", "mpp53";
+			      marvell,function = "sd0";
+			};
 	        };
 
 		gpio0: gpio@d0018100 {

arch/arm/boot/dts/dbx5x0.dtsi

@@ -191,8 +191,8 @@
 
 		prcmu: prcmu@80157000 {
 			compatible = "stericsson,db8500-prcmu";
-			reg = <0x80157000 0x1000>;
-			reg-names = "prcmu";
+			reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
 			#size-cells = <1>;

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -77,6 +77,7 @@
 		};
 
 		nand@3000000 {
+			chip-delay = <40>;
 			status = "okay";
 
 			partition@0 {

arch/arm/boot/dts/orion5x.dtsi

@@ -13,6 +13,9 @@
 	compatible = "marvell,orion5x";
 	interrupt-parent = <&intc>;
 
+	aliases {
+		gpio0 = &gpio0;
+	};
 	intc: interrupt-controller {
 		compatible = "marvell,orion-intc", "marvell,intc";
 		interrupt-controller;
@@ -32,7 +35,9 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10100 0x40>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <6>, <7>, <8>, <9>;
 		};
 
@@ -91,7 +96,7 @@
 			reg = <0x90000 0x10000>,
 			      <0xf2200000 0x800>;
 			reg-names = "regs", "sram";
-			interrupts = <22>;
+			interrupts = <28>;
 			status = "okay";
 		};
 	};

arch/arm/mach-cns3xxx/core.c

@@ -22,19 +22,9 @@
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
 	{
-		.virtual	= CNS3XXX_TC11MP_TWD_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-		.length		= SZ_4K,
+		.virtual	= CNS3XXX_TC11MP_SCU_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+		.length		= SZ_8K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= CNS3XXX_TIMER1_2_3_BASE_VIRT,

arch/arm/mach-cns3xxx/include/mach/cns3xxx.h

@@ -94,10 +94,10 @@
 #define RTC_INTR_STS_OFFSET			0x34
 
 #define CNS3XXX_MISC_BASE			0x76000000	/* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT			0xFFF07000	/* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT			0xFB000000	/* Misc Control */
 
 #define CNS3XXX_PM_BASE				0x77000000	/* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT			0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT			0xFB001000
 
 #define PM_CLK_GATE_OFFSET			0x00
 #define PM_SOFT_RST_OFFSET			0x04
@@ -109,7 +109,7 @@
 #define PM_PLL_HM_PD_OFFSET			0x1C
 
 #define CNS3XXX_UART0_BASE			0x78000000	/* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT			0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT			0xFB002000
 
 #define CNS3XXX_UART1_BASE			0x78400000	/* UART 1 */
 #define CNS3XXX_UART1_BASE_VIRT			0xFFF0A000
@@ -130,7 +130,7 @@
 #define CNS3XXX_I2S_BASE_VIRT			0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE			0x7C800000	/* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT		0xFB003000
 
 #define TIMER1_COUNTER_OFFSET			0x00
 #define TIMER1_AUTO_RELOAD_OFFSET		0x04
@@ -227,16 +227,16 @@
  * Testchip peripheral and fpga gic regions
  */
 #define CNS3XXX_TC11MP_SCU_BASE			0x90000000	/* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT		0xFB004000
 
 #define CNS3XXX_TC11MP_GIC_CPU_BASE		0x90000100	/* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
 
 #define CNS3XXX_TC11MP_TWD_BASE			0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT		0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT		(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
 
 #define CNS3XXX_TC11MP_GIC_DIST_BASE		0x90001000	/* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT	(CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE		0x92002000	/* L220 registers */
 #define CNS3XXX_TC11MP_L220_BASE_VIRT		0xFF002000

arch/arm/mach-ep93xx/include/mach/uncompress.h

@@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 
 static inline void putc(int c)
 {
-	/* Transmit fifo not full?  */
-	while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
-		;
+	int i;
+
+	for (i = 0; i < 10000; i++) {
+		/* Transmit fifo not full? */
+		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
+			break;
+	}
 
 	__raw_writeb(c, PHYS_UART_DATA);
 }

arch/arm/mach-imx/common.h

@@ -110,6 +110,8 @@ void tzic_handle_irq(struct pt_regs *);
 
 extern void imx_enable_cpu(int cpu, bool enable);
 extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
 extern void v7_cpu_resume(void);
 extern u32 *pl310_get_save_ptr(void);
 #ifdef CONFIG_SMP

arch/arm/mach-imx/hotplug.c

@@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
+	/*
+	 * We use the cpu jumping argument register to sync with
+	 * imx_cpu_kill() which is running on cpu0 and waiting for
+	 * the register being cleared to kill the cpu.
+	 */
+	imx_set_cpu_arg(cpu, ~0);
 	cpu_do_idle();
 }
 
 int imx_cpu_kill(unsigned int cpu)
 {
+	unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+	while (imx_get_cpu_arg(cpu) == 0)
+		if (time_after(jiffies, timeout))
+			return 0;
 	imx_enable_cpu(cpu, false);
+	imx_set_cpu_arg(cpu, 0);
 	return 1;
 }

arch/arm/mach-imx/src.c

@@ -43,6 +43,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
 		       src_base + SRC_GPR1 + cpu * 8);
 }
 
+u32 imx_get_cpu_arg(int cpu)
+{
+	cpu = cpu_logical_map(cpu);
+	return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+	cpu = cpu_logical_map(cpu);
+	writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
 void imx_src_prepare_restart(void)
 {
 	u32 val;

arch/arm/mach-kirkwood/guruplug-setup.c

@@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = {
 
 static struct mvsdio_platform_data guruplug_mvsdio_data = {
 	/* unfortunately the CD signal has not been connected */
+	.gpio_card_detect = -1,
+	.gpio_write_protect = -1,
 };
 
 static struct gpio_led guruplug_led_pins[] = {

arch/arm/mach-kirkwood/openrd-setup.c

@@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = {
 
 static struct mvsdio_platform_data openrd_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+	.gpio_write_protect = -1,
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {

arch/arm/mach-kirkwood/rd88f6281-setup.c

@@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
 
 static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
 	.gpio_card_detect = 28,
+	.gpio_write_protect = -1,
 };
 
 static unsigned int rd88f6281_mpp_config[] __initdata = {

arch/arm/mach-msm/timer.c

@@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles,
 {
 	u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
 
-	writel_relaxed(0, event_base + TIMER_CLEAR);
+	ctrl &= ~TIMER_ENABLE_EN;
+	writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+	writel_relaxed(ctrl, event_base + TIMER_CLEAR);
 	writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
 	writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
 	return 0;

arch/arm/mach-mvebu/irq-armada-370-xp.c

@@ -44,6 +44,8 @@
 
 #define ARMADA_370_XP_MAX_PER_CPU_IRQS		(28)
 
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ	(5)
+
 #define ACTIVE_DOORBELLS			(8)
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -62,7 +64,7 @@ static void armada_370_xp_irq_mask(struct irq_data *d)
 #ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
 	else
@@ -79,7 +81,7 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
 #ifdef CONFIG_SMP
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-	if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+	if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
 		writel(hwirq, main_int_base +
 				ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	else
@@ -147,7 +149,7 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
 	writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
 	irq_set_status_flags(virq, IRQ_LEVEL);
 
-	if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+	if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
 		irq_set_percpu_devid(virq);
 		irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
 					handle_percpu_devid_irq);

arch/arm/mach-omap1/clock_data.c

@@ -538,15 +538,6 @@ static struct clk usb_hhc_ck16xx = {
 };
 
 static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
 	.name		= "usb_dc_ck",
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
@@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck7xx,	CK_7XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX | CK_7XX),
 	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
 	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),

arch/arm/mach-omap2/cclock44xx_data.c

@@ -52,6 +52,13 @@
  */
 #define OMAP4_DPLL_ABE_DEFFREQ				98304000
 
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ				960000000
+
 /* Root clocks */
 
 DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
 		    OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
 		    hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
 
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+		OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+		OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
 DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
 		OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
 		OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"per_mcbsp4_gfclk",			&per_mcbsp4_gfclk,	CK_443X),
 	CLK(NULL,	"hsmmc1_fclk",			&hsmmc1_fclk,	CK_443X),
 	CLK(NULL,	"hsmmc2_fclk",			&hsmmc2_fclk,	CK_443X),
+	CLK(NULL,	"ocp2scp_usb_phy_phy_48m",	&ocp2scp_usb_phy_phy_48m,	CK_443X),
 	CLK(NULL,	"sha2md5_fck",			&sha2md5_fck,	CK_443X),
 	CLK(NULL,	"slimbus1_fclk_1",		&slimbus1_fclk_1,	CK_443X),
 	CLK(NULL,	"slimbus1_fclk_0",		&slimbus1_fclk_0,	CK_443X),
@@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void)
 	if (rc)
 		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+	/*
+	 * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+	 * domain can transition to retention state when not in use.
+	 */
+	rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
 	return 0;
 }

arch/arm/mach-omap2/common.h

@@ -293,5 +293,8 @@ extern void omap_reserve(void);
 struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
 
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

arch/arm/mach-omap2/io.c

@@ -54,6 +54,12 @@
 #include "prm3xxx.h"
 #include "prm44xx.h"
 
+/*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
@@ -397,7 +403,7 @@ void __init omap2420_init_early(void)
 	omap242x_clockdomains_init();
 	omap2420_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2420_clk_init();
+	omap_clk_init = omap2420_clk_init;
 }
 
 void __init omap2420_init_late(void)
@@ -427,7 +433,7 @@ void __init omap2430_init_early(void)
 	omap243x_clockdomains_init();
 	omap2430_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap2430_clk_init();
+	omap_clk_init = omap2430_clk_init;
 }
 
 void __init omap2430_init_late(void)
@@ -462,7 +468,7 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3430_init_early(void)
@@ -500,7 +506,7 @@ void __init ti81xx_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap3xxx_clk_init();
+	omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -568,7 +574,7 @@ void __init am33xx_init_early(void)
 	am33xx_clockdomains_init();
 	am33xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	am33xx_clk_init();
+	omap_clk_init = am33xx_clk_init;
 }
 #endif
 
@@ -593,7 +599,7 @@ void __init omap4430_init_early(void)
 	omap44xx_clockdomains_init();
 	omap44xx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap4xxx_clk_init();
+	omap_clk_init = omap4xxx_clk_init;
 }
 
 void __init omap4430_init_late(void)

arch/arm/mach-omap2/omap_hwmod.c

@@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		} else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
 			idlemode = HWMOD_IDLEMODE_NO;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)
@@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	}
 
 	if (sf & SYSC_HAS_MIDLEMODE) {
-		if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+		if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+		    (oh->flags & HWMOD_FORCE_MSTANDBY)) {
 			idlemode = HWMOD_IDLEMODE_FORCE;
 		} else {
 			if (sf & SYSC_HAS_ENAWAKEUP)

arch/arm/mach-omap2/omap_hwmod.h

@@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm {
  *
  * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
  *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ *     out of standby, rather than relying on module smart-standby
  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
  *     XXX Should be HWMOD_SETUP_NO_RESET
@@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm {
  *     correctly, or this is being abused to deal with some PM latency
  *     issues -- but we're currently suffering from a shortage of
  *     folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ *     is kept in force-standby mode. Failing to do so causes PM problems
+ *     with musb on OMAP3630 at least. Note that musb has a dedicated register
+ *     to control MSTANDBY signal when MIDLEMODE is set to force-standby.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_16BIT_REG				(1 << 8)
 #define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 #define HWMOD_BLOCK_WFI				(1 << 10)
+#define HWMOD_FORCE_MSTANDBY			(1 << 11)
 
 /*
  * omap_hwmod._int_flags definitions

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
 	 * Erratum ID: i479  idle_req / idle_ack mechanism potentially
 	 * broken when autoidle is enabled
 	 * workaround is to disable the autoidle bit at module level.
+	 *
+	 * Enabling the device in any other MIDLEMODE setting but force-idle
+	 * causes core_pwrdm not enter idle states at least on OMAP3630.
+	 * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+	 * signal when MIDLEMODE is set to force-idle.
 	 */
 	.flags		= HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
-				| HWMOD_SWSUP_MSTANDBY,
+				| HWMOD_FORCE_MSTANDBY,
 };
 
 /* usb_otg_hs */

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
 	{ }
 };
 
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+	{ .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
 /* ocp2scp_usb_phy */
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
@@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 		},
 	},
 	.dev_attr	= ocp2scp_dev_attr,
+	.opt_clks	= ocp2scp_usb_phy_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
 };
 
 /*

arch/arm/mach-omap2/timer.c

@@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void)
 			       clksrc_nr, clksrc_src)			\
 void __init omap##name##_gptimer_timer_init(void)			\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);	\
@@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void)			\
 				clksrc_nr, clksrc_src)			\
 void __init omap##name##_sync32k_timer_init(void)		\
 {									\
+	if (omap_clk_init)						\
+		omap_clk_init();					\
 	omap_dmtimer_init();						\
 	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
 	/* Enable the use of clocksource="gp_timer" kernel parameter */	\

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi0_data = {
-	.ios_handler	= mop500_sdi0_ios_handler,
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA |

arch/arm/mach-ux500/board-mop500.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-nomadik.h>
@@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev)
 	regulator_put(prox_regulator);
 }
 
+void mop500_snowball_ethernet_clock_enable(void)
+{
+	struct clk *clk;
+
+	clk = clk_get_sys("fsmc", NULL);
+	if (!IS_ERR(clk))
+		clk_prepare_enable(clk);
+}
+
 static struct cryp_platform_data u8500_cryp1_platform_data = {
 		.mem_to_engine = {
 				.dir = STEDMA40_MEM_TO_PERIPH,
@@ -683,6 +693,8 @@ static void __init snowball_init_machine(void)
 	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
+	mop500_snowball_ethernet_clock_enable();
+
 	/* This board has full regulator constraints */
 	regulator_has_full_constraints();
 }

arch/arm/mach-ux500/board-mop500.h

@@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
+void mop500_snowball_ethernet_clock_enable(void);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,

arch/arm/mach-ux500/cpu-db8500.c

@@ -312,9 +312,10 @@ static void __init u8500_init_machine(void)
 	/* Pinmaps must be in place before devices register */
 	if (of_machine_is_compatible("st-ericsson,mop500"))
 		mop500_pinmaps_init();
-	else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+	else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
 		snowball_pinmaps_init();
-	else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+		mop500_snowball_ethernet_clock_enable();
+	} else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
 		hrefv60_pinmaps_init();
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
 		/* TODO: Add pinmaps for ccu9540 board. */

arch/mips/Kconfig

@@ -18,7 +18,7 @@ config MIPS
 	select HAVE_KRETPROBES
 	select HAVE_DEBUG_KMEMLEAK
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
-	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
 	select RTC_LIB if !MACH_LOONGSON
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@@ -1493,7 +1493,6 @@ config CPU_XLP
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
-	select CPU_HAS_LLSC
 	select WEAK_ORDERING
 	select WEAK_REORDERING_BEYOND_LLSC
 	select CPU_HAS_PREFETCH

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -745,10 +745,7 @@ void __init board_prom_init(void)
 		strcpy(cfe_version, "unknown");
 	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
 
-	if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
-		printk(KERN_ERR PFX "invalid nvram checksum\n");
-		return;
-	}
+	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
 
 	board_name = bcm63xx_nvram_get_name();
 	/* find board by name */

arch/mips/bcm63xx/nvram.c

@@ -38,7 +38,7 @@ struct bcm963xx_nvram {
 static struct bcm963xx_nvram nvram;
 static int mac_addr_used;
 
-int __init bcm63xx_nvram_init(void *addr)
+void __init bcm63xx_nvram_init(void *addr)
 {
 	unsigned int check_len;
 	u32 crc, expected_crc;
@@ -60,9 +60,8 @@ int __init bcm63xx_nvram_init(void *addr)
 	crc = crc32_le(~0, (u8 *)&nvram, check_len);
 
 	if (crc != expected_crc)
-		return -EINVAL;
-
-	return 0;
+		pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
+			expected_crc, crc);
 }
 
 u8 *bcm63xx_nvram_get_name(void)

arch/mips/bcm63xx/setup.c

@@ -157,4 +157,4 @@ int __init bcm63xx_register_devices(void)
 	return board_register_devices();
 }
 
-device_initcall(bcm63xx_register_devices);
+arch_initcall(bcm63xx_register_devices);

arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h

@@ -9,10 +9,8 @@
  *
  * Initialized the local nvram copy from the target address and checks
  * its checksum.
- *
- * Returns 0 on success.
  */
-int __init bcm63xx_nvram_init(void *nvram);
+void bcm63xx_nvram_init(void *nvram);
 
 /**
  * bcm63xx_nvram_get_name() - returns the board name according to nvram

arch/mips/include/asm/mach-sead3/cpu-feature-overrides.h

@@ -28,11 +28,7 @@
 /* #define cpu_has_prefetch	? */
 #define cpu_has_mcheck		1
 /* #define cpu_has_ejtag	? */
-#ifdef CONFIG_CPU_HAS_LLSC
 #define cpu_has_llsc		1
-#else
-#define cpu_has_llsc		0
-#endif
 /* #define cpu_has_vtag_icache	? */
 /* #define cpu_has_dc_aliases	? */
 /* #define cpu_has_ic_fills_f_dc ? */

arch/mips/include/asm/mipsregs.h

@@ -1166,7 +1166,10 @@ do {									\
 	unsigned int __dspctl;						\
 									\
 	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
 	"	rddsp	%0, %x1					\n"	\
+	"	.set pop					\n"	\
 	: "=r" (__dspctl)						\
 	: "i" (mask));							\
 	__dspctl;							\
@@ -1175,30 +1178,198 @@ do {									\
 #define wrdsp(val, mask)						\
 do {									\
 	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
 	"	wrdsp	%0, %x1					\n"	\
+	"	.set pop					\n"	\
 	:								\
 	: "r" (val), "i" (mask));					\
 } while (0)
 
-#define mflo0() ({ long mflo0; __asm__("mflo %0, $ac0" : "=r" (mflo0)); mflo0;})
-#define mflo1() ({ long mflo1; __asm__("mflo %0, $ac1" : "=r" (mflo1)); mflo1;})
-#define mflo2() ({ long mflo2; __asm__("mflo %0, $ac2" : "=r" (mflo2)); mflo2;})
-#define mflo3() ({ long mflo3; __asm__("mflo %0, $ac3" : "=r" (mflo3)); mflo3;})
-
-#define mfhi0() ({ long mfhi0; __asm__("mfhi %0, $ac0" : "=r" (mfhi0)); mfhi0;})
-#define mfhi1() ({ long mfhi1; __asm__("mfhi %0, $ac1" : "=r" (mfhi1)); mfhi1;})
-#define mfhi2() ({ long mfhi2; __asm__("mfhi %0, $ac2" : "=r" (mfhi2)); mfhi2;})
-#define mfhi3() ({ long mfhi3; __asm__("mfhi %0, $ac3" : "=r" (mfhi3)); mfhi3;})
-
-#define mtlo0(x) __asm__("mtlo %0, $ac0" ::"r" (x))
-#define mtlo1(x) __asm__("mtlo %0, $ac1" ::"r" (x))
-#define mtlo2(x) __asm__("mtlo %0, $ac2" ::"r" (x))
-#define mtlo3(x) __asm__("mtlo %0, $ac3" ::"r" (x))
-
-#define mthi0(x) __asm__("mthi %0, $ac0" ::"r" (x))
-#define mthi1(x) __asm__("mthi %0, $ac1" ::"r" (x))
-#define mthi2(x) __asm__("mthi %0, $ac2" ::"r" (x))
-#define mthi3(x) __asm__("mthi %0, $ac3" ::"r" (x))
+#define mflo0()								\
+({									\
+	long mflo0;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac0					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo0)); 						\
+	mflo0;								\
+})
+
+#define mflo1()								\
+({									\
+	long mflo1;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac1					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo1)); 						\
+	mflo1;								\
+})
+
+#define mflo2()								\
+({									\
+	long mflo2;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac2					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo2)); 						\
+	mflo2;								\
+})
+
+#define mflo3()								\
+({									\
+	long mflo3;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mflo %0, $ac3					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mflo3)); 						\
+	mflo3;								\
+})
+
+#define mfhi0()								\
+({									\
+	long mfhi0;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac0					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi0)); 						\
+	mfhi0;								\
+})
+
+#define mfhi1()								\
+({									\
+	long mfhi1;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac1					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi1)); 						\
+	mfhi1;								\
+})
+
+#define mfhi2()								\
+({									\
+	long mfhi2;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac2					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi2)); 						\
+	mfhi2;								\
+})
+
+#define mfhi3()								\
+({									\
+	long mfhi3;							\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mfhi %0, $ac3					\n"	\
+	"	.set pop					\n" 	\
+	: "=r" (mfhi3)); 						\
+	mfhi3;								\
+})
+
+
+#define mtlo0(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac0					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo1(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac1					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo2(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac2					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mtlo3(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mtlo %0, $ac3					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi0(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac0					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi1(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac1					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi2(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac2					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
+
+#define mthi3(x)							\
+({									\
+	__asm__(							\
+	"	.set push					\n"	\
+	"	.set dsp					\n"	\
+	"	mthi %0, $ac3					\n"	\
+	"	.set pop					\n"	\
+	:								\
+	: "r" (x));							\
+})
 
 #else
 

arch/mips/include/asm/signal.h

@@ -21,6 +21,6 @@
 #include <asm/sigcontext.h>
 #include <asm/siginfo.h>
 
-#define __ARCH_HAS_ODD_SIGACTION
+#define __ARCH_HAS_IRIX_SIGACTION
 
 #endif /* _ASM_SIGNAL_H */

arch/mips/kernel/Makefile

@@ -100,29 +100,16 @@ obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
 #
-# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is safe
-# to enable DSP assembler support here even if the MIPS Release 2 CPU we
-# are targetting does not support DSP because all code-paths making use of
-# it properly check that the running CPU *actually does* support these
-# instructions.
+# DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
+# safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches
+# here because the compiler may use DSP ASE instructions (such as lwx) in
+# code paths where we cannot check that the CPU we are running on supports it.
+# Proper abstraction using HAVE_AS_DSP and macros is done in
+# arch/mips/include/asm/mipsregs.h.
 #
 ifeq ($(CONFIG_CPU_MIPSR2), y)
 CFLAGS_DSP 			= -DHAVE_AS_DSP
 
-#
-# Check if assembler supports DSP ASE
-#
-ifeq ($(call cc-option-yn,-mdsp), y)
-CFLAGS_DSP			+= -mdsp
-endif
-
-#
-# Check if assembler supports DSP ASE Rev2
-#
-ifeq ($(call cc-option-yn,-mdspr2), y)
-CFLAGS_DSP			+= -mdspr2
-endif
-
 CFLAGS_signal.o			= $(CFLAGS_DSP)
 CFLAGS_signal32.o		= $(CFLAGS_DSP)
 CFLAGS_process.o		= $(CFLAGS_DSP)

arch/mips/kernel/cpu-probe.c

@@ -580,6 +580,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		c->tlbsize = 48;
 		break;
 	case PRID_IMP_VR41XX:
+		set_isa(c, MIPS_CPU_ISA_III);
+		c->options = R4K_OPTS;
+		c->tlbsize = 32;
 		switch (c->processor_id & 0xf0) {
 		case PRID_REV_VR4111:
 			c->cputype = CPU_VR4111;
@@ -604,6 +607,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 				__cpu_name[cpu] = "NEC VR4131";
 			} else {
 				c->cputype = CPU_VR4133;
+				c->options |= MIPS_CPU_LLSC;
 				__cpu_name[cpu] = "NEC VR4133";
 			}
 			break;
@@ -613,9 +617,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			__cpu_name[cpu] = "NEC Vr41xx";
 			break;
 		}
-		set_isa(c, MIPS_CPU_ISA_III);
-		c->options = R4K_OPTS;
-		c->tlbsize = 32;
 		break;
 	case PRID_IMP_R4300:
 		c->cputype = CPU_R4300;

arch/mips/kernel/linux32.c

@@ -171,7 +171,7 @@ SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third,
 		err = compat_sys_shmctl(first, second, compat_ptr(ptr));
 		break;
 	default:
-		err = -EINVAL;
+		err = -ENOSYS;
 		break;
 	}
 

arch/mips/kernel/proc.c

@@ -67,7 +67,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (cpu_has_mips_r) {
 		seq_printf(m, "isa\t\t\t:");
 		if (cpu_has_mips_1)
-			seq_printf(m, "%s", "mips1");
+			seq_printf(m, "%s", " mips1");
 		if (cpu_has_mips_2)
 			seq_printf(m, "%s", " mips2");
 		if (cpu_has_mips_3)

arch/mips/lib/bitops.c

@@ -90,12 +90,12 @@ int __mips_test_and_set_bit(unsigned long nr,
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a |= mask;
 	raw_local_irq_restore(flags);
 	return res;
@@ -116,12 +116,12 @@ int __mips_test_and_set_bit_lock(unsigned long nr,
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a |= mask;
 	raw_local_irq_restore(flags);
 	return res;
@@ -141,12 +141,12 @@ int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a &= ~mask;
 	raw_local_irq_restore(flags);
 	return res;
@@ -166,12 +166,12 @@ int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 	unsigned bit = nr & SZLONG_MASK;
 	unsigned long mask;
 	unsigned long flags;
-	unsigned long res;
+	int res;
 
 	a += nr >> SZLONG_LOG;
 	mask = 1UL << bit;
 	raw_local_irq_save(flags);
-	res = (mask & *a);
+	res = (mask & *a) != 0;
 	*a ^= mask;
 	raw_local_irq_restore(flags);
 	return res;

arch/mips/lib/csum_partial.S

@@ -270,7 +270,7 @@ LEAF(csum_partial)
 #endif
 
 	/* odd buffer alignment? */
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
 	wsbh	v1, sum
 	movn	sum, v1, t7
 #else
@@ -670,7 +670,7 @@ EXC(	sb	t0, NBYTES-2(dst), .Ls_exc)
 	addu	sum, v1
 #endif
 
-#ifdef CPU_MIPSR2
+#ifdef CONFIG_CPU_MIPSR2
 	wsbh	v1, sum
 	movn	sum, v1, odd
 #else

drivers/base/regmap/regcache-rbtree.c

@@ -398,7 +398,7 @@ static int regcache_rbtree_sync(struct regmap *map, unsigned int min,
 			base = 0;
 
 		if (max < rbnode->base_reg + rbnode->blklen)
-			end = rbnode->base_reg + rbnode->blklen - max;
+			end = max - rbnode->base_reg + 1;
 		else
 			end = rbnode->blklen;
 

drivers/base/regmap/regmap.c

@@ -710,12 +710,12 @@ skip_format_initialization:
 		}
 	}
 
+	regmap_debugfs_init(map, config->name);
+
 	ret = regcache_init(map, config);
 	if (ret != 0)
 		goto err_range;
 
-	regmap_debugfs_init(map, config->name);
-
 	/* Add a devres resource for dev_get_regmap() */
 	m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
 	if (!m) {
@@ -943,8 +943,7 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg,
 		unsigned int ival;
 		int val_bytes = map->format.val_bytes;
 		for (i = 0; i < val_len / val_bytes; i++) {
-			memcpy(map->work_buf, val + (i * val_bytes), val_bytes);
-			ival = map->format.parse_val(map->work_buf);
+			ival = map->format.parse_val(val + (i * val_bytes));
 			ret = regcache_write(map, reg + (i * map->reg_stride),
 					     ival);
 			if (ret) {
@@ -1036,6 +1035,8 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg,
 			kfree(async->work_buf);
 			kfree(async);
 		}
+
+		return ret;
 	}
 
 	trace_regmap_hw_write_start(map->dev, reg,

drivers/block/loop.c

@@ -922,6 +922,11 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
 		lo->lo_flags |= LO_FLAGS_PARTSCAN;
 	if (lo->lo_flags & LO_FLAGS_PARTSCAN)
 		ioctl_by_bdev(bdev, BLKRRPART, 0);
+
+	/* Grab the block_device to prevent its destruction after we
+	 * put /dev/loopXX inode. Later in loop_clr_fd() we bdput(bdev).
+	 */
+	bdgrab(bdev);
 	return 0;
 
 out_clr:
@@ -1031,8 +1036,10 @@ static int loop_clr_fd(struct loop_device *lo)
 	memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE);
 	memset(lo->lo_crypt_name, 0, LO_NAME_SIZE);
 	memset(lo->lo_file_name, 0, LO_NAME_SIZE);
-	if (bdev)
+	if (bdev) {
+		bdput(bdev);
 		invalidate_bdev(bdev);
+	}
 	set_capacity(lo->lo_disk, 0);
 	loop_sysfs_exit(lo);
 	if (bdev) {

drivers/char/hw_random/core.c

@@ -380,6 +380,15 @@ void hwrng_unregister(struct hwrng *rng)
 }
 EXPORT_SYMBOL_GPL(hwrng_unregister);
 
+static void __exit hwrng_exit(void)
+{
+	mutex_lock(&rng_mutex);
+	BUG_ON(current_rng);
+	kfree(rng_buffer);
+	mutex_unlock(&rng_mutex);
+}
+
+module_exit(hwrng_exit);
 
 MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver");
 MODULE_LICENSE("GPL");

drivers/char/virtio_console.c

@@ -149,7 +149,8 @@ struct ports_device {
 	spinlock_t ports_lock;
 
 	/* To protect the vq operations for the control channel */
-	spinlock_t cvq_lock;
+	spinlock_t c_ivq_lock;
+	spinlock_t c_ovq_lock;
 
 	/* The current config space is stored here */
 	struct virtio_console_config config;
@@ -569,11 +570,14 @@ static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id,
 	vq = portdev->c_ovq;
 
 	sg_init_one(sg, &cpkt, sizeof(cpkt));
+
+	spin_lock(&portdev->c_ovq_lock);
 	if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt, GFP_ATOMIC) == 0) {
 		virtqueue_kick(vq);
 		while (!virtqueue_get_buf(vq, &len))
 			cpu_relax();
 	}
+	spin_unlock(&portdev->c_ovq_lock);
 	return 0;
 }
 
@@ -1436,7 +1440,7 @@ static int add_port(struct ports_device *portdev, u32 id)
 		 * rproc_serial does not want the console port, only
 		 * the generic port implementation.
 		 */
-		port->host_connected = port->guest_connected = true;
+		port->host_connected = true;
 	else if (!use_multiport(port->portdev)) {
 		/*
 		 * If we're not using multiport support,
@@ -1709,23 +1713,23 @@ static void control_work_handler(struct work_struct *work)
 	portdev = container_of(work, struct ports_device, control_work);
 	vq = portdev->c_ivq;
 
-	spin_lock(&portdev->cvq_lock);
+	spin_lock(&portdev->c_ivq_lock);
 	while ((buf = virtqueue_get_buf(vq, &len))) {
-		spin_unlock(&portdev->cvq_lock);
+		spin_unlock(&portdev->c_ivq_lock);
 
 		buf->len = len;
 		buf->offset = 0;
 
 		handle_control_message(portdev, buf);
 
-		spin_lock(&portdev->cvq_lock);
+		spin_lock(&portdev->c_ivq_lock);
 		if (add_inbuf(portdev->c_ivq, buf) < 0) {
 			dev_warn(&portdev->vdev->dev,
 				 "Error adding buffer to queue\n");
 			free_buf(buf, false);
 		}
 	}
-	spin_unlock(&portdev->cvq_lock);
+	spin_unlock(&portdev->c_ivq_lock);
 }
 
 static void out_intr(struct virtqueue *vq)
@@ -1752,13 +1756,23 @@ static void in_intr(struct virtqueue *vq)
 	port->inbuf = get_inbuf(port);
 
 	/*
-	 * Don't queue up data when port is closed.  This condition
+	 * Normally the port should not accept data when the port is
+	 * closed. For generic serial ports, the host won't (shouldn't)
+	 * send data till the guest is connected. But this condition
 	 * can be reached when a console port is not yet connected (no
-	 * tty is spawned) and the host sends out data to console
-	 * ports.  For generic serial ports, the host won't
-	 * (shouldn't) send data till the guest is connected.
+	 * tty is spawned) and the other side sends out data over the
+	 * vring, or when a remote devices start sending data before
+	 * the ports are opened.
+	 *
+	 * A generic serial port will discard data if not connected,
+	 * while console ports and rproc-serial ports accepts data at
+	 * any time. rproc-serial is initiated with guest_connected to
+	 * false because port_fops_open expects this. Console ports are
+	 * hooked up with an HVC console and is initialized with
+	 * guest_connected to true.
 	 */
-	if (!port->guest_connected)
+
+	if (!port->guest_connected && !is_rproc_serial(port->portdev->vdev))
 		discard_port_data(port);
 
 	spin_unlock_irqrestore(&port->inbuf_lock, flags);
@@ -1986,10 +2000,12 @@ static int virtcons_probe(struct virtio_device *vdev)
 	if (multiport) {
 		unsigned int nr_added_bufs;
 
-		spin_lock_init(&portdev->cvq_lock);
+		spin_lock_init(&portdev->c_ivq_lock);
+		spin_lock_init(&portdev->c_ovq_lock);
 		INIT_WORK(&portdev->control_work, &control_work_handler);
 
-		nr_added_bufs = fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+		nr_added_bufs = fill_queue(portdev->c_ivq,
+					   &portdev->c_ivq_lock);
 		if (!nr_added_bufs) {
 			dev_err(&vdev->dev,
 				"Error allocating buffers for control queue\n");
@@ -2140,7 +2156,7 @@ static int virtcons_restore(struct virtio_device *vdev)
 		return ret;
 
 	if (use_multiport(portdev))
-		fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+		fill_queue(portdev->c_ivq, &portdev->c_ivq_lock);
 
 	list_for_each_entry(port, &portdev->ports, list) {
 		port->in_vq = portdev->in_vqs[port->id];

drivers/clk/tegra/clk-tegra20.c

@@ -703,7 +703,7 @@ static void tegra20_pll_init(void)
 	clks[pll_a_out0] = clk;
 
 	/* PLLE */
-	clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, NULL,
+	clk = tegra_clk_register_plle("pll_e", "pll_ref", clk_base, pmc_base,
 			     0, 100000000, &pll_e_params,
 			     0, pll_e_freq_table, NULL);
 	clk_register_clkdev(clk, "pll_e", NULL);

drivers/gpu/drm/drm_crtc.c

@@ -2326,7 +2326,6 @@ int drm_mode_addfb(struct drm_device *dev,
 	fb = dev->mode_config.funcs->fb_create(dev, file_priv, &r);
 	if (IS_ERR(fb)) {
 		DRM_DEBUG_KMS("could not create framebuffer\n");
-		drm_modeset_unlock_all(dev);
 		return PTR_ERR(fb);
 	}
 
@@ -2506,7 +2505,6 @@ int drm_mode_addfb2(struct drm_device *dev,
 	fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
 	if (IS_ERR(fb)) {
 		DRM_DEBUG_KMS("could not create framebuffer\n");
-		drm_modeset_unlock_all(dev);
 		return PTR_ERR(fb);
 	}
 

drivers/gpu/drm/drm_fops.c

@@ -123,6 +123,7 @@ int drm_open(struct inode *inode, struct file *filp)
 	int retcode = 0;
 	int need_setup = 0;
 	struct address_space *old_mapping;
+	struct address_space *old_imapping;
 
 	minor = idr_find(&drm_minors_idr, minor_id);
 	if (!minor)
@@ -137,6 +138,7 @@ int drm_open(struct inode *inode, struct file *filp)
 	if (!dev->open_count++)
 		need_setup = 1;
 	mutex_lock(&dev->struct_mutex);
+	old_imapping = inode->i_mapping;
 	old_mapping = dev->dev_mapping;
 	if (old_mapping == NULL)
 		dev->dev_mapping = &inode->i_data;
@@ -159,8 +161,8 @@ int drm_open(struct inode *inode, struct file *filp)
 
 err_undo:
 	mutex_lock(&dev->struct_mutex);
-	filp->f_mapping = old_mapping;
-	inode->i_mapping = old_mapping;
+	filp->f_mapping = old_imapping;
+	inode->i_mapping = old_imapping;
 	iput(container_of(dev->dev_mapping, struct inode, i_data));
 	dev->dev_mapping = old_mapping;
 	mutex_unlock(&dev->struct_mutex);

drivers/gpu/drm/i915/i915_gem_execbuffer.c

@@ -57,7 +57,7 @@ eb_create(struct drm_i915_gem_execbuffer2 *args)
 	if (eb == NULL) {
 		int size = args->buffer_count;
 		int count = PAGE_SIZE / sizeof(struct hlist_head) / 2;
-		BUILD_BUG_ON(!is_power_of_2(PAGE_SIZE / sizeof(struct hlist_head)));
+		BUILD_BUG_ON_NOT_POWER_OF_2(PAGE_SIZE / sizeof(struct hlist_head));
 		while (count > 2*size)
 			count >>= 1;
 		eb = kzalloc(count*sizeof(struct hlist_head) +

drivers/gpu/drm/i915/intel_crt.c

@@ -45,6 +45,9 @@
 
 struct intel_crt {
 	struct intel_encoder base;
+	/* DPMS state is stored in the connector, which we need in the
+	 * encoder's enable/disable callbacks */
+	struct intel_connector *connector;
 	bool force_hotplug_required;
 	u32 adpa_reg;
 };
@@ -81,29 +84,6 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
 	return true;
 }
 
-static void intel_disable_crt(struct intel_encoder *encoder)
-{
-	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
-	struct intel_crt *crt = intel_encoder_to_crt(encoder);
-	u32 temp;
-
-	temp = I915_READ(crt->adpa_reg);
-	temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
-	temp &= ~ADPA_DAC_ENABLE;
-	I915_WRITE(crt->adpa_reg, temp);
-}
-
-static void intel_enable_crt(struct intel_encoder *encoder)
-{
-	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
-	struct intel_crt *crt = intel_encoder_to_crt(encoder);
-	u32 temp;
-
-	temp = I915_READ(crt->adpa_reg);
-	temp |= ADPA_DAC_ENABLE;
-	I915_WRITE(crt->adpa_reg, temp);
-}
-
 /* Note: The caller is required to filter out dpms modes not supported by the
  * platform. */
 static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
@@ -135,6 +115,19 @@ static void intel_crt_set_dpms(struct intel_encoder *encoder, int mode)
 	I915_WRITE(crt->adpa_reg, temp);
 }
 
+static void intel_disable_crt(struct intel_encoder *encoder)
+{
+	intel_crt_set_dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+static void intel_enable_crt(struct intel_encoder *encoder)
+{
+	struct intel_crt *crt = intel_encoder_to_crt(encoder);
+
+	intel_crt_set_dpms(encoder, crt->connector->base.dpms);
+}
+
+
 static void intel_crt_dpms(struct drm_connector *connector, int mode)
 {
 	struct drm_device *dev = connector->dev;
@@ -746,6 +739,7 @@ void intel_crt_init(struct drm_device *dev)
 	}
 
 	connector = &intel_connector->base;
+	crt->connector = intel_connector;
 	drm_connector_init(dev, &intel_connector->base,
 			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 

drivers/gpu/drm/i915/intel_dp.c

@@ -2559,12 +2559,15 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder)
 {
 	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
 	struct intel_dp *intel_dp = &intel_dig_port->dp;
+	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 
 	i2c_del_adapter(&intel_dp->adapter);
 	drm_encoder_cleanup(encoder);
 	if (is_edp(intel_dp)) {
 		cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
+		mutex_lock(&dev->mode_config.mutex);
 		ironlake_panel_vdd_off_sync(intel_dp);
+		mutex_unlock(&dev->mode_config.mutex);
 	}
 	kfree(intel_dig_port);
 }

drivers/gpu/drm/nouveau/nouveau_abi16.c

@@ -391,7 +391,7 @@ nouveau_abi16_ioctl_notifierobj_alloc(ABI16_IOCTL_ARGS)
 	struct nouveau_drm *drm = nouveau_drm(dev);
 	struct nouveau_device *device = nv_device(drm->device);
 	struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev);
-	struct nouveau_abi16_chan *chan, *temp;
+	struct nouveau_abi16_chan *chan = NULL, *temp;
 	struct nouveau_abi16_ntfy *ntfy;
 	struct nouveau_object *object;
 	struct nv_dma_class args = {};
@@ -404,10 +404,11 @@ nouveau_abi16_ioctl_notifierobj_alloc(ABI16_IOCTL_ARGS)
 	if (unlikely(nv_device(abi16->device)->card_type >= NV_C0))
 		return nouveau_abi16_put(abi16, -EINVAL);
 
-	list_for_each_entry_safe(chan, temp, &abi16->channels, head) {
-		if (chan->chan->handle == (NVDRM_CHAN | info->channel))
+	list_for_each_entry(temp, &abi16->channels, head) {
+		if (temp->chan->handle == (NVDRM_CHAN | info->channel)) {
+			chan = temp;
 			break;
-		chan = NULL;
+		}
 	}
 
 	if (!chan)
@@ -459,17 +460,18 @@ nouveau_abi16_ioctl_gpuobj_free(ABI16_IOCTL_ARGS)
 {
 	struct drm_nouveau_gpuobj_free *fini = data;
 	struct nouveau_abi16 *abi16 = nouveau_abi16_get(file_priv, dev);
-	struct nouveau_abi16_chan *chan, *temp;
+	struct nouveau_abi16_chan *chan = NULL, *temp;
 	struct nouveau_abi16_ntfy *ntfy;
 	int ret;
 
 	if (unlikely(!abi16))
 		return -ENOMEM;
 
-	list_for_each_entry_safe(chan, temp, &abi16->channels, head) {
-		if (chan->chan->handle == (NVDRM_CHAN | fini->channel))
+	list_for_each_entry(temp, &abi16->channels, head) {
+		if (temp->chan->handle == (NVDRM_CHAN | fini->channel)) {
+			chan = temp;
 			break;
-		chan = NULL;
+		}
 	}
 
 	if (!chan)

drivers/gpu/drm/nouveau/nouveau_drm.c

@@ -71,12 +71,26 @@ module_param_named(modeset, nouveau_modeset, int, 0400);
 
 static struct drm_driver driver;
 
+static int
+nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head)
+{
+	struct nouveau_drm *drm =
+		container_of(event, struct nouveau_drm, vblank[head]);
+	drm_handle_vblank(drm->dev, head);
+	return NVKM_EVENT_KEEP;
+}
+
 static int
 nouveau_drm_vblank_enable(struct drm_device *dev, int head)
 {
 	struct nouveau_drm *drm = nouveau_drm(dev);
 	struct nouveau_disp *pdisp = nouveau_disp(drm->device);
-	nouveau_event_get(pdisp->vblank, head, &drm->vblank);
+
+	if (WARN_ON_ONCE(head > ARRAY_SIZE(drm->vblank)))
+		return -EIO;
+	WARN_ON_ONCE(drm->vblank[head].func);
+	drm->vblank[head].func = nouveau_drm_vblank_handler;
+	nouveau_event_get(pdisp->vblank, head, &drm->vblank[head]);
 	return 0;
 }
 
@@ -85,16 +99,11 @@ nouveau_drm_vblank_disable(struct drm_device *dev, int head)
 {
 	struct nouveau_drm *drm = nouveau_drm(dev);
 	struct nouveau_disp *pdisp = nouveau_disp(drm->device);
-	nouveau_event_put(pdisp->vblank, head, &drm->vblank);
-}
-
-static int
-nouveau_drm_vblank_handler(struct nouveau_eventh *event, int head)
-{
-	struct nouveau_drm *drm =
-		container_of(event, struct nouveau_drm, vblank);
-	drm_handle_vblank(drm->dev, head);
-	return NVKM_EVENT_KEEP;
+	if (drm->vblank[head].func)
+		nouveau_event_put(pdisp->vblank, head, &drm->vblank[head]);
+	else
+		WARN_ON_ONCE(1);
+	drm->vblank[head].func = NULL;
 }
 
 static u64
@@ -292,7 +301,6 @@ nouveau_drm_load(struct drm_device *dev, unsigned long flags)
 
 	dev->dev_private = drm;
 	drm->dev = dev;
-	drm->vblank.func = nouveau_drm_vblank_handler;
 
 	INIT_LIST_HEAD(&drm->clients);
 	spin_lock_init(&drm->tile.lock);

drivers/gpu/drm/nouveau/nouveau_drm.h

@@ -113,7 +113,7 @@ struct nouveau_drm {
 	struct nvbios vbios;
 	struct nouveau_display *display;
 	struct backlight_device *backlight;
-	struct nouveau_eventh vblank;
+	struct nouveau_eventh vblank[4];
 
 	/* power management */
 	struct nouveau_pm *pm;

drivers/net/bonding/bond_main.c

@@ -1975,12 +1975,11 @@ static int __bond_release_one(struct net_device *bond_dev,
 		return -EINVAL;
 	}
 
+	write_unlock_bh(&bond->lock);
 	/* unregister rx_handler early so bond_handle_frame wouldn't be called
 	 * for this slave anymore.
 	 */
 	netdev_rx_handler_unregister(slave_dev);
-	write_unlock_bh(&bond->lock);
-	synchronize_net();
 	write_lock_bh(&bond->lock);
 
 	if (!all && !bond->params.fail_over_mac) {

drivers/net/ethernet/mellanox/mlx4/en_netdev.c

@@ -411,8 +411,8 @@ static int mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 
 static void mlx4_en_u64_to_mac(unsigned char dst_mac[ETH_ALEN + 2], u64 src_mac)
 {
-	unsigned int i;
-	for (i = ETH_ALEN - 1; i; --i) {
+	int i;
+	for (i = ETH_ALEN - 1; i >= 0; --i) {
 		dst_mac[i] = src_mac & 0xff;
 		src_mac >>= 8;
 	}

drivers/scsi/bnx2fc/bnx2fc_fcoe.c

@@ -940,6 +940,7 @@ static int bnx2fc_libfc_config(struct fc_lport *lport)
 	fc_exch_init(lport);
 	fc_rport_init(lport);
 	fc_disc_init(lport);
+	fc_disc_config(lport, lport);
 	return 0;
 }
 
@@ -2133,6 +2134,7 @@ static int _bnx2fc_create(struct net_device *netdev,
 	}
 
 	ctlr = bnx2fc_to_ctlr(interface);
+	cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
 	interface->vlan_id = vlan_id;
 
 	interface->timer_work_queue =
@@ -2143,7 +2145,7 @@ static int _bnx2fc_create(struct net_device *netdev,
 		goto ifput_err;
 	}
 
-	lport = bnx2fc_if_create(interface, &interface->hba->pcidev->dev, 0);
+	lport = bnx2fc_if_create(interface, &cdev->dev, 0);
 	if (!lport) {
 		printk(KERN_ERR PFX "Failed to create interface (%s)\n",
 			netdev->name);
@@ -2159,8 +2161,6 @@ static int _bnx2fc_create(struct net_device *netdev,
 	/* Make this master N_port */
 	ctlr->lp = lport;
 
-	cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
-
 	if (link_state == BNX2FC_CREATE_LINK_UP)
 		cdev->enabled = FCOE_CTLR_ENABLED;
 	else

drivers/scsi/fcoe/fcoe.c

@@ -490,7 +490,6 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
 {
 	struct net_device *netdev = fcoe->netdev;
 	struct fcoe_ctlr *fip = fcoe_to_ctlr(fcoe);
-	struct fcoe_ctlr_device *ctlr_dev = fcoe_ctlr_to_ctlr_dev(fip);
 
 	rtnl_lock();
 	if (!fcoe->removed)
@@ -501,7 +500,6 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe)
 	/* tear-down the FCoE controller */
 	fcoe_ctlr_destroy(fip);
 	scsi_host_put(fip->lp->host);
-	fcoe_ctlr_device_delete(ctlr_dev);
 	dev_put(netdev);
 	module_put(THIS_MODULE);
 }
@@ -2194,6 +2192,8 @@ out_nodev:
  */
 static void fcoe_destroy_work(struct work_struct *work)
 {
+	struct fcoe_ctlr_device *cdev;
+	struct fcoe_ctlr *ctlr;
 	struct fcoe_port *port;
 	struct fcoe_interface *fcoe;
 	struct Scsi_Host *shost;
@@ -2224,10 +2224,15 @@ static void fcoe_destroy_work(struct work_struct *work)
 	mutex_lock(&fcoe_config_mutex);
 
 	fcoe = port->priv;
+	ctlr = fcoe_to_ctlr(fcoe);
+	cdev = fcoe_ctlr_to_ctlr_dev(ctlr);
+
 	fcoe_if_destroy(port->lport);
 	fcoe_interface_cleanup(fcoe);
 
 	mutex_unlock(&fcoe_config_mutex);
+
+	fcoe_ctlr_device_delete(cdev);
 }
 
 /**
@@ -2335,7 +2340,9 @@ static int _fcoe_create(struct net_device *netdev, enum fip_state fip_mode,
 		rc = -EIO;
 		rtnl_unlock();
 		fcoe_interface_cleanup(fcoe);
-		goto out_nortnl;
+		mutex_unlock(&fcoe_config_mutex);
+		fcoe_ctlr_device_delete(ctlr_dev);
+		goto out;
 	}
 
 	/* Make this the "master" N_Port */
@@ -2375,8 +2382,8 @@ static int _fcoe_create(struct net_device *netdev, enum fip_state fip_mode,
 
 out_nodev:
 	rtnl_unlock();
-out_nortnl:
 	mutex_unlock(&fcoe_config_mutex);
+out:
 	return rc;
 }
 

drivers/scsi/fcoe/fcoe_ctlr.c

@@ -2814,6 +2814,47 @@ unlock:
 		fc_lport_set_local_id(fip->lp, new_port_id);
 }
 
+/**
+ * fcoe_ctlr_mode_set() - Set or reset the ctlr's mode
+ * @lport: The local port to be (re)configured
+ * @fip:   The FCoE controller whose mode is changing
+ * @fip_mode: The new fip mode
+ *
+ * Note that the we shouldn't be changing the libfc discovery settings
+ * (fc_disc_config) while an lport is going through the libfc state
+ * machine. The mode can only be changed when a fcoe_ctlr device is
+ * disabled, so that should ensure that this routine is only called
+ * when nothing is happening.
+ */
+void fcoe_ctlr_mode_set(struct fc_lport *lport, struct fcoe_ctlr *fip,
+			enum fip_state fip_mode)
+{
+	void *priv;
+
+	WARN_ON(lport->state != LPORT_ST_RESET &&
+		lport->state != LPORT_ST_DISABLED);
+
+	if (fip_mode == FIP_MODE_VN2VN) {
+		lport->rport_priv_size = sizeof(struct fcoe_rport);
+		lport->point_to_multipoint = 1;
+		lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
+		lport->tt.disc_start = fcoe_ctlr_disc_start;
+		lport->tt.disc_stop = fcoe_ctlr_disc_stop;
+		lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
+		priv = fip;
+	} else {
+		lport->rport_priv_size = 0;
+		lport->point_to_multipoint = 0;
+		lport->tt.disc_recv_req = NULL;
+		lport->tt.disc_start = NULL;
+		lport->tt.disc_stop = NULL;
+		lport->tt.disc_stop_final = NULL;
+		priv = lport;
+	}
+
+	fc_disc_config(lport, priv);
+}
+
 /**
  * fcoe_libfc_config() - Sets up libfc related properties for local port
  * @lport:    The local port to configure libfc for
@@ -2833,21 +2874,9 @@ int fcoe_libfc_config(struct fc_lport *lport, struct fcoe_ctlr *fip,
 	fc_exch_init(lport);
 	fc_elsct_init(lport);
 	fc_lport_init(lport);
-	if (fip->mode == FIP_MODE_VN2VN)
-		lport->rport_priv_size = sizeof(struct fcoe_rport);
 	fc_rport_init(lport);
-	if (fip->mode == FIP_MODE_VN2VN) {
-		lport->point_to_multipoint = 1;
-		lport->tt.disc_recv_req = fcoe_ctlr_disc_recv;
-		lport->tt.disc_start = fcoe_ctlr_disc_start;
-		lport->tt.disc_stop = fcoe_ctlr_disc_stop;
-		lport->tt.disc_stop_final = fcoe_ctlr_disc_stop_final;
-		mutex_init(&lport->disc.disc_mutex);
-		INIT_LIST_HEAD(&lport->disc.rports);
-		lport->disc.priv = fip;
-	} else {
-		fc_disc_init(lport);
-	}
+	fc_disc_init(lport);
+	fcoe_ctlr_mode_set(lport, fip, fip->mode);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(fcoe_libfc_config);
@@ -2875,6 +2904,7 @@ EXPORT_SYMBOL(fcoe_fcf_get_selected);
 void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev)
 {
 	struct fcoe_ctlr *ctlr = fcoe_ctlr_device_priv(ctlr_dev);
+	struct fc_lport *lport = ctlr->lp;
 
 	mutex_lock(&ctlr->ctlr_mutex);
 	switch (ctlr_dev->mode) {
@@ -2888,5 +2918,7 @@ void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *ctlr_dev)
 	}
 
 	mutex_unlock(&ctlr->ctlr_mutex);
+
+	fcoe_ctlr_mode_set(lport, ctlr, ctlr->mode);
 }
 EXPORT_SYMBOL(fcoe_ctlr_set_fip_mode);

drivers/scsi/libfc/fc_disc.c

@@ -712,12 +712,13 @@ static void fc_disc_stop_final(struct fc_lport *lport)
 }
 
 /**
- * fc_disc_init() - Initialize the discovery layer for a local port
- * @lport: The local port that needs the discovery layer to be initialized
+ * fc_disc_config() - Configure the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be configured
+ * @priv: Private data structre for users of the discovery layer
  */
-int fc_disc_init(struct fc_lport *lport)
+void fc_disc_config(struct fc_lport *lport, void *priv)
 {
-	struct fc_disc *disc;
+	struct fc_disc *disc = &lport->disc;
 
 	if (!lport->tt.disc_start)
 		lport->tt.disc_start = fc_disc_start;
@@ -732,12 +733,21 @@ int fc_disc_init(struct fc_lport *lport)
 		lport->tt.disc_recv_req = fc_disc_recv_req;
 
 	disc = &lport->disc;
+
+	disc->priv = priv;
+}
+EXPORT_SYMBOL(fc_disc_config);
+
+/**
+ * fc_disc_init() - Initialize the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be initialized
+ */
+void fc_disc_init(struct fc_lport *lport)
+{
+	struct fc_disc *disc = &lport->disc;
+
 	INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
 	mutex_init(&disc->disc_mutex);
 	INIT_LIST_HEAD(&disc->rports);
-
-	disc->priv = lport;
-
-	return 0;
 }
 EXPORT_SYMBOL(fc_disc_init);

drivers/video/sh_mobile_lcdcfb.c

@@ -858,6 +858,7 @@ static void sh_mobile_lcdc_geometry(struct sh_mobile_lcdc_chan *ch)
 	tmp = ((mode->xres & 7) << 24) | ((display_h_total & 7) << 16)
 	    | ((mode->hsync_len & 7) << 8) | (hsync_pos & 7);
 	lcdc_write_chan(ch, LDHAJR, tmp);
+	lcdc_write_chan_mirror(ch, LDHAJR, tmp);
 }
 
 static void sh_mobile_lcdc_overlay_setup(struct sh_mobile_lcdc_overlay *ovl)

fs/block_dev.c

@@ -551,6 +551,7 @@ struct block_device *bdgrab(struct block_device *bdev)
 	ihold(bdev->bd_inode);
 	return bdev;
 }
+EXPORT_SYMBOL(bdgrab);
 
 long nr_blockdev_pages(void)
 {

fs/nfsd/nfs4xdr.c

@@ -264,7 +264,7 @@ nfsd4_decode_fattr(struct nfsd4_compoundargs *argp, u32 *bmval,
 		iattr->ia_valid |= ATTR_SIZE;
 	}
 	if (bmval[0] & FATTR4_WORD0_ACL) {
-		int nace;
+		u32 nace;
 		struct nfs4_ace *ace;
 
 		READ_BUF(4); len += 4;

include/linux/compat.h

@@ -141,11 +141,11 @@ typedef struct {
 } compat_sigset_t;
 
 struct compat_sigaction {
-#ifndef __ARCH_HAS_ODD_SIGACTION
+#ifndef __ARCH_HAS_IRIX_SIGACTION
 	compat_uptr_t			sa_handler;
 	compat_ulong_t			sa_flags;
 #else
-	compat_ulong_t			sa_flags;
+	compat_uint_t			sa_flags;
 	compat_uptr_t			sa_handler;
 #endif
 #ifdef __ARCH_HAS_SA_RESTORER

include/linux/signal.h

@@ -250,11 +250,11 @@ extern int show_unhandled_signals;
 extern int sigsuspend(sigset_t *);
 
 struct sigaction {
-#ifndef __ARCH_HAS_ODD_SIGACTION
+#ifndef __ARCH_HAS_IRIX_SIGACTION
 	__sighandler_t	sa_handler;
 	unsigned long	sa_flags;
 #else
-	unsigned long	sa_flags;
+	unsigned int	sa_flags;
 	__sighandler_t	sa_handler;
 #endif
 #ifdef __ARCH_HAS_SA_RESTORER

include/scsi/libfc.h

@@ -1074,7 +1074,8 @@ void fc_rport_terminate_io(struct fc_rport *);
 /*
  * DISCOVERY LAYER
  *****************************/
-int fc_disc_init(struct fc_lport *);
+void fc_disc_init(struct fc_lport *);
+void fc_disc_config(struct fc_lport *, void *);
 
 static inline struct fc_lport *fc_disc_lport(struct fc_disc *disc)
 {

ipc/msg.c

@@ -872,6 +872,7 @@ long do_msgrcv(int msqid, void __user *buf, size_t bufsz, long msgtyp,
 							goto out_unlock;
 						break;
 					}
+					msg = ERR_PTR(-EAGAIN);
 				} else
 					break;
 				msg_counter++;

net/ipv6/addrconf.c

@@ -2616,6 +2616,9 @@ static void sit_add_v4_addrs(struct inet6_dev *idev)
 static void init_loopback(struct net_device *dev)
 {
 	struct inet6_dev  *idev;
+	struct net_device *sp_dev;
+	struct inet6_ifaddr *sp_ifa;
+	struct rt6_info *sp_rt;
 
 	/* ::1 */
 
@@ -2627,6 +2630,30 @@ static void init_loopback(struct net_device *dev)
 	}
 
 	add_addr(idev, &in6addr_loopback, 128, IFA_HOST);
+
+	/* Add routes to other interface's IPv6 addresses */
+	for_each_netdev(dev_net(dev), sp_dev) {
+		if (!strcmp(sp_dev->name, dev->name))
+			continue;
+
+		idev = __in6_dev_get(sp_dev);
+		if (!idev)
+			continue;
+
+		read_lock_bh(&idev->lock);
+		list_for_each_entry(sp_ifa, &idev->addr_list, if_list) {
+
+			if (sp_ifa->flags & (IFA_F_DADFAILED | IFA_F_TENTATIVE))
+				continue;
+
+			sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0);
+
+			/* Failure cases are ignored */
+			if (!IS_ERR(sp_rt))
+				ip6_ins_rt(sp_rt);
+		}
+		read_unlock_bh(&idev->lock);
+	}
 }
 
 static void addrconf_add_linklocal(struct inet6_dev *idev, const struct in6_addr *addr)

net/sched/sch_cbq.c

@@ -962,8 +962,11 @@ cbq_dequeue(struct Qdisc *sch)
 		cbq_update(q);
 		if ((incr -= incr2) < 0)
 			incr = 0;
+		q->now += incr;
+	} else {
+		if (now > q->now)
+			q->now = now;
 	}
-	q->now += incr;
 	q->now_rt = now;
 
 	for (;;) {

net/vmw_vsock/af_vsock.c

@@ -207,7 +207,7 @@ static struct sock *__vsock_find_bound_socket(struct sockaddr_vm *addr)
 	struct vsock_sock *vsk;
 
 	list_for_each_entry(vsk, vsock_bound_sockets(addr), bound_table)
-		if (vsock_addr_equals_addr_any(addr, &vsk->local_addr))
+		if (addr->svm_port == vsk->local_addr.svm_port)
 			return sk_vsock(vsk);
 
 	return NULL;
@@ -220,8 +220,8 @@ static struct sock *__vsock_find_connected_socket(struct sockaddr_vm *src,
 
 	list_for_each_entry(vsk, vsock_connected_sockets(src, dst),
 			    connected_table) {
-		if (vsock_addr_equals_addr(src, &vsk->remote_addr)
-		    && vsock_addr_equals_addr(dst, &vsk->local_addr)) {
+		if (vsock_addr_equals_addr(src, &vsk->remote_addr) &&
+		    dst->svm_port == vsk->local_addr.svm_port) {
 			return sk_vsock(vsk);
 		}
 	}

net/vmw_vsock/vmci_transport.c

@@ -472,19 +472,16 @@ static struct sock *vmci_transport_get_pending(
 	struct vsock_sock *vlistener;
 	struct vsock_sock *vpending;
 	struct sock *pending;
+	struct sockaddr_vm src;
+
+	vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port);
 
 	vlistener = vsock_sk(listener);
 
 	list_for_each_entry(vpending, &vlistener->pending_links,
 			    pending_links) {
-		struct sockaddr_vm src;
-		struct sockaddr_vm dst;
-
-		vsock_addr_init(&src, pkt->dg.src.context, pkt->src_port);
-		vsock_addr_init(&dst, pkt->dg.dst.context, pkt->dst_port);
-
 		if (vsock_addr_equals_addr(&src, &vpending->remote_addr) &&
-		    vsock_addr_equals_addr(&dst, &vpending->local_addr)) {
+		    pkt->dst_port == vpending->local_addr.svm_port) {
 			pending = sk_vsock(vpending);
 			sock_hold(pending);
 			goto found;
@@ -749,10 +746,15 @@ static int vmci_transport_recv_stream_cb(void *data, struct vmci_datagram *dg)
 	 */
 	bh_lock_sock(sk);
 
-	if (!sock_owned_by_user(sk) && sk->sk_state == SS_CONNECTED)
-		vmci_trans(vsk)->notify_ops->handle_notify_pkt(
-				sk, pkt, true, &dst, &src,
-				&bh_process_pkt);
+	if (!sock_owned_by_user(sk)) {
+		/* The local context ID may be out of date, update it. */
+		vsk->local_addr.svm_cid = dst.svm_cid;
+
+		if (sk->sk_state == SS_CONNECTED)
+			vmci_trans(vsk)->notify_ops->handle_notify_pkt(
+					sk, pkt, true, &dst, &src,
+					&bh_process_pkt);
+	}
 
 	bh_unlock_sock(sk);
 
@@ -912,6 +914,9 @@ static void vmci_transport_recv_pkt_work(struct work_struct *work)
 
 	lock_sock(sk);
 
+	/* The local context ID may be out of date. */
+	vsock_sk(sk)->local_addr.svm_cid = pkt->dg.dst.context;
+
 	switch (sk->sk_state) {
 	case SS_LISTEN:
 		vmci_transport_recv_listen(sk, pkt);
@@ -968,6 +973,10 @@ static int vmci_transport_recv_listen(struct sock *sk,
 	pending = vmci_transport_get_pending(sk, pkt);
 	if (pending) {
 		lock_sock(pending);
+
+		/* The local context ID may be out of date. */
+		vsock_sk(pending)->local_addr.svm_cid = pkt->dg.dst.context;
+
 		switch (pending->sk_state) {
 		case SS_CONNECTING:
 			err = vmci_transport_recv_connecting_server(sk,

net/vmw_vsock/vsock_addr.c

@@ -64,16 +64,6 @@ bool vsock_addr_equals_addr(const struct sockaddr_vm *addr,
 }
 EXPORT_SYMBOL_GPL(vsock_addr_equals_addr);
 
-bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr,
-				const struct sockaddr_vm *other)
-{
-	return (addr->svm_cid == VMADDR_CID_ANY ||
-		other->svm_cid == VMADDR_CID_ANY ||
-		addr->svm_cid == other->svm_cid) &&
-	       addr->svm_port == other->svm_port;
-}
-EXPORT_SYMBOL_GPL(vsock_addr_equals_addr_any);
-
 int vsock_addr_cast(const struct sockaddr *addr,
 		    size_t len, struct sockaddr_vm **out_addr)
 {

net/vmw_vsock/vsock_addr.h

@@ -24,8 +24,6 @@ bool vsock_addr_bound(const struct sockaddr_vm *addr);
 void vsock_addr_unbind(struct sockaddr_vm *addr);
 bool vsock_addr_equals_addr(const struct sockaddr_vm *addr,
 			    const struct sockaddr_vm *other);
-bool vsock_addr_equals_addr_any(const struct sockaddr_vm *addr,
-				const struct sockaddr_vm *other);
 int vsock_addr_cast(const struct sockaddr *addr, size_t len,
 		    struct sockaddr_vm **out_addr);