sh: rework intc2 code

The shared intc2 code currently contains cpu-specific #ifdefs.
This is a tad unclean and it prevents us from using the shared code
to drive board-specific irqs on the se7780 board.

This patch reworks the intc2 code by moving the base addresses of
the intc2 registers into struct intc2_desc. This new structure also
contains the name of the controller in struct irq_chip. The idea
behind putting struct irq_chip in there is that we can use offsetof()
to locate the base addresses in the irq_chip callbacks.

One logic change has been made - the original shared intc2 code
enabled the interrupts by default but with this patch they are all
disabled by default.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/boards/se/7780/irq.c

@@ -16,28 +16,6 @@
 #include <asm/io.h>
 #include <asm/se7780.h>
 
-#define INTC_INTMSK0             0xFFD00044
-#define INTC_INTMSKCLR0          0xFFD00064
-
-static void disable_se7780_irq(unsigned int irq)
-{
-	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC_INTMSK0 + p->msk_offset);
-}
-
-static void enable_se7780_irq(unsigned int irq)
-{
-	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC_INTMSKCLR0 + p->msk_offset);
-}
-
-static struct irq_chip se7780_irq_chip __read_mostly = {
-	.name           = "SE7780",
-	.mask           = disable_se7780_irq,
-	.unmask         = enable_se7780_irq,
-	.mask_ack       = disable_se7780_irq,
-};
-
 static struct intc2_data intc2_irq_table[] = {
 	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
 	{ 4,  0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
@@ -51,13 +29,24 @@ static struct intc2_data intc2_irq_table[] = {
 	{ 0 , 0, 24, 0, 24, 3 }, /* SM501 */
 };
 
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0, /* N/A */
+	.msk_base	= 0xffd00044,
+	.mskclr_base	= 0xffd00064,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-se7780",
+	},
+};
+
 /*
  * Initialize IRQ setting
  */
 void __init init_se7780_IRQ(void)
 {
-	int i ;
-
 	/* enable all interrupt at FPGA */
 	ctrl_outw(0, FPGA_INTMSK1);
 	/* mask SM501 interrupt */
@@ -79,11 +68,5 @@ void __init init_se7780_IRQ(void)
 	/* FPGA + 0x0A */
 	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
 
-	for (i = 0; i < ARRAY_SIZE(intc2_irq_table); i++) {
-		disable_irq_nosync(intc2_irq_table[i].irq);
-		set_irq_chip_and_handler_name( intc2_irq_table[i].irq, &se7780_irq_chip,
-			handle_level_irq, "level");
-		set_irq_chip_data( intc2_irq_table[i].irq, &intc2_irq_table[i] );
-		disable_se7780_irq(intc2_irq_table[i].irq);
-	}
+	register_intc2_controller(&intc2_irq_desc);
 }

arch/sh/kernel/cpu/irq/intc2.c

@@ -14,36 +14,26 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
-#define INTC2_BASE	0xfe080000
-#define INTC2_INTMSK	(INTC2_BASE + 0x40)
-#define INTC2_INTMSKCLR	(INTC2_BASE + 0x60)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || \
-      defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define INTC2_BASE	0xffd40000
-#define INTC2_INTMSK	(INTC2_BASE + 0x38)
-#define INTC2_INTMSKCLR	(INTC2_BASE + 0x3c)
-#endif
+static inline struct intc2_desc *get_intc2_desc(unsigned int irq)
+{
+	struct irq_chip *chip = get_irq_chip(irq);
+	return (void *)((char *)chip - offsetof(struct intc2_desc, chip));
+}
 
 static void disable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset);
+	struct intc2_desc *d = get_intc2_desc(irq);
+	ctrl_outl(1 << p->msk_shift, d->msk_base + p->msk_offset);
 }
 
 static void enable_intc2_irq(unsigned int irq)
 {
 	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset);
+	struct intc2_desc *d = get_intc2_desc(irq);
+	ctrl_outl(1 << p->msk_shift, d->mskclr_base + p->msk_offset);
 }
 
-static struct irq_chip intc2_irq_chip = {
-	.name		= "INTC2",
-	.mask		= disable_intc2_irq,
-	.unmask		= enable_intc2_irq,
-	.mask_ack	= disable_intc2_irq,
-};
-
 /*
  * Setup an INTC2 style interrupt.
  * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
@@ -56,30 +46,36 @@ static struct irq_chip intc2_irq_chip = {
  *
  * in the intc2_data table.
  */
-void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs)
+void register_intc2_controller(struct intc2_desc *desc)
 {
 	int i;
 
-	for (i = 0; i < nr_irqs; i++) {
+	desc->chip.mask = disable_intc2_irq;
+	desc->chip.unmask = enable_intc2_irq;
+	desc->chip.mask_ack = disable_intc2_irq;
+
+	for (i = 0; i < desc->nr_irqs; i++) {
 		unsigned long ipr, flags;
-		struct intc2_data *p = table + i;
+		struct intc2_data *p = desc->intc2_data + i;
 
 		disable_irq_nosync(p->irq);
 
-		/* Set the priority level */
-		local_irq_save(flags);
+		if (desc->prio_base) {
+			/* Set the priority level */
+			local_irq_save(flags);
 
-		ipr = ctrl_inl(INTC2_BASE + p->ipr_offset);
-		ipr &= ~(0xf << p->ipr_shift);
-		ipr |= p->priority << p->ipr_shift;
-		ctrl_outl(ipr, INTC2_BASE + p->ipr_offset);
+			ipr = ctrl_inl(desc->prio_base + p->ipr_offset);
+			ipr &= ~(0xf << p->ipr_shift);
+			ipr |= p->priority << p->ipr_shift;
+			ctrl_outl(ipr, desc->prio_base + p->ipr_offset);
 
-		local_irq_restore(flags);
+			local_irq_restore(flags);
+		}
 
-		set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip,
+		set_irq_chip_and_handler_name(p->irq, &desc->chip,
 					      handle_level_irq, "level");
 		set_irq_chip_data(p->irq, p);
 
-		enable_intc2_irq(p->irq);
+		disable_intc2_irq(p->irq);
 	}
 }

arch/sh/kernel/cpu/sh4/setup-sh7760.c

@@ -96,6 +96,19 @@ static struct intc2_data intc2_irq_table[] = {
 	{109,12,  0, 4,  0,  3},	/* CMTI */
 };
 
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0xfe080000,
+	.msk_base	= 0xfe080040,
+	.mskclr_base	= 0xfe080060,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-sh7760",
+	},
+};
+
 static struct ipr_data sh7760_ipr_map[] = {
 	/* IRQ, IPR-idx, shift, priority */
 	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
@@ -143,7 +156,7 @@ unsigned int map_ipridx_to_addr(int idx)
 
 void __init init_IRQ_intc2(void)
 {
-	make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+	register_intc2_controller(&intc2_irq_desc);
 }
 
 void __init  init_IRQ_ipr(void)

arch/sh/kernel/cpu/sh4a/setup-sh7780.c

@@ -102,7 +102,20 @@ static struct intc2_data intc2_irq_table[] = {
 	{ 68, 0x14,  8, 0, 18, 2 },	/* PCIC4 */
 };
 
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0xffd40000,
+	.msk_base	= 0xffd40038,
+	.mskclr_base	= 0xffd4003c,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-sh7780",
+	},
+};
+
 void __init init_IRQ_intc2(void)
 {
-	make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+	register_intc2_controller(&intc2_irq_desc);
 }

arch/sh/kernel/cpu/sh4a/setup-sh7785.c

@@ -97,7 +97,21 @@ static struct intc2_data intc2_irq_table[] = {
 	{ 60, 12, 16, 0, 7, 3 },	/* SCIF5 ERI, RXI, BRI, TXI */
 };
 
+static struct intc2_desc intc2_irq_desc __read_mostly = {
+	.prio_base	= 0xffd40000,
+	.msk_base	= 0xffd40038,
+	.mskclr_base	= 0xffd4003c,
+
+	.intc2_data	= intc2_irq_table,
+	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
+
+	.chip = {
+		.name	= "INTC2-sh7785",
+	},
+};
+
 void __init init_IRQ_intc2(void)
 {
-	make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table));
+	register_intc2_controller(&intc2_irq_desc);
 }
+

include/asm-sh/hw_irq.h

@@ -5,4 +5,23 @@
 
 extern atomic_t irq_err_count;
 
+struct intc2_data {
+	unsigned short irq;
+	unsigned char ipr_offset, ipr_shift;
+	unsigned char msk_offset, msk_shift;
+	unsigned char priority;
+};
+
+struct intc2_desc {
+	unsigned long prio_base;
+	unsigned long msk_base;
+	unsigned long mskclr_base;
+	struct intc2_data *intc2_data;
+	unsigned int nr_irqs;
+	struct irq_chip chip;
+};
+
+void register_intc2_controller(struct intc2_desc *);
+void init_IRQ_intc2(void);
+
 #endif /* __ASM_SH_HW_IRQ_H */

include/asm-sh/irq.h

@@ -63,16 +63,6 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs);
 void make_imask_irq(unsigned int irq);
 void init_IRQ_ipr(void);
 
-struct intc2_data {
-	unsigned short irq;
-	unsigned char ipr_offset, ipr_shift;
-	unsigned char msk_offset, msk_shift;
-	unsigned char priority;
-};
-
-void make_intc2_irq(struct intc2_data *, unsigned int nr_irqs);
-void init_IRQ_intc2(void);
-
 static inline int generic_irq_demux(int irq)
 {
 	return irq;