Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable

arch/arm/mach-mx2/Kconfig

@@ -6,11 +6,13 @@ choice
 
 config MACH_MX21
 	bool "i.MX21 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 

arch/arm/mach-mx2/clock_imx27.c

@@ -651,8 +651,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
 	_REGISTER_CLOCK(NULL, "dma", dma_clk)

arch/arm/mach-mx2/devices.c

@@ -530,6 +530,84 @@ struct platform_device mxc_usbh2 = {
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI1,
+		.end	= MXC_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI1_TX0,
+		.end	= DMA_REQ_SSI1_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI1_RX0,
+		.end	= DMA_REQ_SSI1_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI1_TX1,
+		.end	= DMA_REQ_SSI1_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI1_RX1,
+		.end	= DMA_REQ_SSI1_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI2,
+		.end	= MXC_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI2_TX0,
+		.end	= DMA_REQ_SSI2_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI2_RX0,
+		.end	= DMA_REQ_SSI2_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI2_TX1,
+		.end	= DMA_REQ_SSI2_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI2_RX1,
+		.end	= DMA_REQ_SSI2_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{

arch/arm/mach-mx2/devices.h

@@ -26,4 +26,5 @@ extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
-
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;

arch/arm/mach-mx2/pca100.c

@@ -237,7 +237,7 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pca100_init,
 	.timer          = &pca100_timer,
 MACHINE_END

arch/arm/mach-mx3/Kconfig

@@ -2,11 +2,13 @@ if ARCH_MX3
 
 config ARCH_MX31
 	select ARCH_HAS_RNGA
+	select ARCH_MXC_AUDMUX_V2
 	bool
 
 config ARCH_MX35
 	bool
 	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
 
 comment "MX3 platforms:"
 
@@ -61,6 +63,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
+	select MXC_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.

arch/arm/mach-mx3/Makefile

@@ -4,12 +4,12 @@
 
 # Object file lists.
 
-obj-y				:= mm.o devices.o
+obj-y				:= mm.o devices.o cpu.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o

arch/arm/mach-mx3/armadillo5x0.c

@@ -33,6 +33,9 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -97,6 +100,47 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+	/* I2C2 */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+};
+
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/* GPIO BUTTONS */
+static struct gpio_keys_button armadillo5x0_buttons[] = {
+	{
+		.code		= KEY_ENTER, /*28*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
+		.active_low	= 1,
+		.desc		= "menu",
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_BACK, /*158*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
+		.active_low	= 1,
+		.desc		= "back",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data armadillo5x0_button_data = {
+	.buttons	= armadillo5x0_buttons,
+	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
+};
+
+static struct platform_device armadillo5x0_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &armadillo5x0_button_data,
+	}
 };
 
 /*
@@ -278,7 +322,7 @@ static struct resource armadillo5x0_smc911x_resources[] = {
 };
 
 static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_32BIT,
+	.flags		= SMSC911X_USE_16BIT,
 	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 };
@@ -300,6 +344,8 @@ static struct imxuart_platform_data uart_pdata = {
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
+	&mxc_i2c_device1,
+	&armadillo5x0_button_device,
 };
 
 /*
@@ -335,6 +381,18 @@ static void __init armadillo5x0_init(void)
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+	/* RTC */
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+		else
+			gpio_free(ARMADILLO5X0_RTC_GPIO);
+	}
+	if (armadillo5x0_i2c_rtc.irq == 0)
+		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 }
 
 static void __init armadillo5x0_timer_init(void)

arch/arm/mach-mx3/clock-imx35.c

@@ -335,7 +335,7 @@ static void clk_cgr_disable(struct clk *clk)
 
 DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
 DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL);
+/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL); */
 DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
 DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
 DEFINE_CLOCK(cspi1_clk,  0, CCM_CGR0, 10, get_rate_ipg, NULL);
@@ -381,12 +381,41 @@ DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
 DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL);
 
 DEFINE_CLOCK(csi_clk,    0, CCM_CGR3,  0, get_rate_csi, NULL);
 DEFINE_CLOCK(iim_clk,    0, CCM_CGR3,  2, NULL, NULL);
 DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 
+static int clk_dummy_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	unsigned long div1;
+
+	div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1;
+
+	return get_rate_ahb(NULL) / div1;
+}
+
+/* NAND Controller: It seems it can't be disabled */
+static struct clk nfc_clk = {
+	.id		= 0,
+	.enable_reg	= 0,
+	.enable_shift	= 0,
+	.get_rate	= get_rate_nfc,
+	.set_rate	= NULL, /* set_rate_nfc, */
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable
+};
+
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
 		.dev_id = d,		\
@@ -397,7 +426,6 @@ DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "can", can1_clk)
 	_REGISTER_CLOCK(NULL, "can", can2_clk)
 	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
@@ -434,8 +462,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
 	_REGISTER_CLOCK(NULL, "spba", spba_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
@@ -445,10 +473,11 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
 	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
-	_REGISTER_CLOCK(NULL, "admux", admux_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 };
 
 int __init mx35_clocks_init()

arch/arm/mach-mx3/clock.c

@@ -558,8 +558,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK(NULL, "firi", firi_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
@@ -616,6 +616,8 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	clk_enable(&serial_pll_clk);
 
+	mx31_read_cpu_rev();
+
 	if (mx31_revision() >= CHIP_REV_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */

arch/arm/mach-mx3/cpu.c

@@ -0,0 +1,57 @@
+/*
+ * MX3 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx31_cpu_rev;
+EXPORT_SYMBOL(mx31_cpu_rev);
+
+struct mx3_cpu_type {
+	u8 srev;
+	const char *name;
+	const char *v;
+	unsigned int rev;
+};
+
+static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = CHIP_REV_1_0	},
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = CHIP_REV_2_0	},
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = CHIP_REV_2_0	},
+};
+
+void __init mx31_read_cpu_rev(void)
+{
+	u32 i, srev;
+
+	/* read SREV register from IIM module */
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+
+	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+		if (srev == mx31_cpu_type[i].srev) {
+			printk(KERN_INFO
+				"CPU identified as %s, silicon rev %s\n",
+				mx31_cpu_type[i].name, mx31_cpu_type[i].v);
+
+			mx31_cpu_rev = mx31_cpu_type[i].rev;
+			return;
+		}
+
+	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+}

arch/arm/mach-mx3/devices.c

@@ -537,6 +537,44 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX31_INT_SSI1,
+		.end	= MX31_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX31_INT_SSI2,
+		.end	= MX31_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 static int mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
@@ -546,7 +584,7 @@ static int mx3_devices_init(void)
 	}
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
 		otg_resources[0].start = MX35_OTG_BASE_ADDR;
 		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
 		otg_resources[1].start = MXC_INT_USBOTG;
@@ -555,6 +593,10 @@ static int mx3_devices_init(void)
 		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
 		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
 		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
+		imx_ssi_resources0[1].start = MX35_INT_SSI1;
+		imx_ssi_resources0[1].end = MX35_INT_SSI1;
+		imx_ssi_resources1[1].start = MX35_INT_SSI2;
+		imx_ssi_resources1[1].end = MX35_INT_SSI2;
 	}
 
 	return 0;

arch/arm/mach-mx3/devices.h

@@ -23,4 +23,6 @@ extern struct platform_device mxc_rnga_device;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
 

arch/arm/mach-mx3/mx31lilly-db.c

@@ -109,6 +109,9 @@ static int mxc_mmc1_get_ro(struct device *dev)
 
 static int gpio_det, gpio_wp;
 
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
 static int mxc_mmc1_init(struct device *dev,
 			 irq_handler_t detect_irq, void *data)
 {
@@ -117,6 +120,13 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
 	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
 
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
 	ret = gpio_request(gpio_det, "MMC detect");
 	if (ret)
 		return ret;

arch/arm/mach-mx3/mx31lilly.c

@@ -31,6 +31,8 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13783.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +43,7 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -108,7 +111,36 @@ static struct platform_device physmap_flash_device = {
 static struct platform_device *devices[] __initdata = {
 	&smsc91x_device,
 	&physmap_flash_device,
-	&mxc_i2c_device1,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info mc13783_dev __initdata = {
+	.modalias	= "mc13783",
+	.max_speed_hz	= 1000000,
+	.bus_num	= 1,
+	.chip_select	= 0,
+	.platform_data	= &mc13783_pdata,
 };
 
 static int mx31lilly_baseboard;
@@ -128,8 +160,27 @@ static void __init mx31lilly_board_init(void)
 	}
 
 	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+	/* SPI */
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
+
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
+
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }

arch/arm/mach-mx3/mx31lite-db.c

@@ -0,0 +1,198 @@
+/*
+ *  LogicPD i.MX31 SOM-LV development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lite.h>
+#include <mach/mmc.h>
+#include <mach/spi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
+ * If you design an own baseboard for the module, use this file as base
+ * for support code.
+ */
+
+static unsigned int litekit_db_board_pins[] __initdata = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* SPI 0 */
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC */
+
+static int gpio_det, gpio_wp;
+
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
+
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+	.get_ro	 = mxc_mmc1_get_ro,
+	.init	   = mxc_mmc1_init,
+	.exit	   = mxc_mmc1_exit,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+/* GPIO LEDs */
+
+static struct gpio_led litekit_leds[] = {
+	{
+		.name           = "GPIO0",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name           = "GPIO1",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	}
+};
+
+static struct gpio_led_platform_data litekit_led_platform_data = {
+	.leds           = litekit_leds,
+	.num_leds       = ARRAY_SIZE(litekit_leds),
+};
+
+static struct platform_device litekit_led_device = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data = &litekit_led_platform_data,
+	},
+};
+
+void __init mx31lite_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
+					ARRAY_SIZE(litekit_db_board_pins),
+					"development board pins");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	platform_device_register(&litekit_led_device);
+}
+

arch/arm/mach-mx3/mx31lite.c

@@ -2,6 +2,7 @@
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,38 +26,47 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/board-mx31lite.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
 #include "devices.h"
 
 /*
- * This file contains the board-specific initialization routines.
+ * This file contains the module-specific initialization routines.
  */
 
 static unsigned int mx31lite_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* LAN9117 IRQ pin */
 	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS1__SS1,
+	MX31_PIN_CSPI2_SS2__SS2,
 };
 
 static struct mxc_nand_platform_data mx31lite_nand_board_info = {
@@ -92,6 +102,111 @@ static struct platform_device smsc911x_device = {
 	},
 };
 
+/*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags  = MC13783_USE_RTC |
+		  MC13783_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+	.modalias       = "mc13783",
+	.max_speed_hz   = 1000000,
+	.bus_num	= 1,
+	.chip_select    = 0,
+	.platform_data  = &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+/*
+ * USB
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init   = usbh2_init,
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start  = 0xa0000000,
+	.end    = 0xa1ffffff,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name   = "physmap-flash",
+	.id     = 0,
+	.dev    = {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+
+
 /*
  * This structure defines the MX31 memory map.
  */
@@ -118,19 +233,40 @@ void __init mx31lite_map_io(void)
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
-/*
- * Board specific initialization.
- */
+static int mx31lite_baseboard;
+core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
+
 static void __init mxc_board_init(void)
 {
 	int ret;
 
+	switch (mx31lite_baseboard) {
+	case MX31LITE_NOBOARD:
+		break;
+	case MX31LITE_DB:
+		mx31lite_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
+				mx31lite_baseboard);
+	}
+
 	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
 				      "mx31lite");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	/* NOR and NAND flash */
+	platform_device_register(&physmap_flash_device);
 	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
 
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_spi_dev, 1);
+
+	/* USB */
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
@@ -150,12 +286,7 @@ struct sys_timer mx31lite_timer = {
 	.init	= mx31lite_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31LITE data structure.
- */
-
-MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
+MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,

arch/arm/mach-mx3/mx31moboard-devboard.c

@@ -22,11 +22,15 @@
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -39,6 +43,12 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -98,6 +108,80 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int devboard_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int devboard_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= devboard_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init devboard_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= devboard_isp1105_init;
+	otg->set_vbus	= devboard_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -111,4 +195,6 @@ void __init mx31moboard_devboard_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	devboard_usbh1_init();
 }

arch/arm/mach-mx3/mx31moboard-marxbot.c

@@ -16,17 +16,26 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
 
 #include "devices.h"
 
@@ -37,7 +46,6 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
 	/* CSI */
-	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
 	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
 	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
 	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
@@ -45,10 +53,19 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
 	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
 	/* dsPIC resets */
 	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
+	/*battery detection */
+	MX31_PIN_LCS0__GPIO3_23,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -120,6 +137,166 @@ static void dspics_resets_init(void)
 	}
 }
 
+static struct spi_board_info marxbot_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 1, /* according spi1_cs[] ! */
+	},
+};
+
+#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
+#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
+
+static int marxbot_basecam_power(struct device *dev, int on)
+{
+	gpio_set_value(BASECAM_POWER, !on);
+	return 0;
+}
+
+static int marxbot_basecam_reset(struct device *dev)
+{
+	gpio_set_value(BASECAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(BASECAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info marxbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= marxbot_basecam_power,
+	.reset		= marxbot_basecam_reset,
+	.board_info	= &marxbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9t031",
+};
+
+static struct platform_device marxbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *marxbot_cameras[] __initdata = {
+	&marxbot_camera[0],
+};
+
+static int __init marxbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_CHOICE, "cam-choice");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_CHOICE, 1);
+
+	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_RST_B, 1);
+	ret = gpio_request(BASECAM_POWER, "basecam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_POWER, 0);
+
+	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_RST_B, 1);
+	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_POWER, 0);
+
+	return 0;
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int marxbot_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int marxbot_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= marxbot_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init marxbot_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= marxbot_isp1105_init;
+	otg->set_vbus	= marxbot_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -133,4 +310,17 @@ void __init mx31moboard_marxbot_init(void)
 	dspics_resets_init();
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	spi_register_board_info(marxbot_spi_board_info,
+		ARRAY_SIZE(marxbot_spi_board_info));
+
+	marxbot_cam_init();
+	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
+
+	/* battery present pin */
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
+
+	marxbot_usbh1_init();
 }

arch/arm/mach-mx3/mx31moboard.c

@@ -17,6 +17,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
@@ -26,8 +27,14 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -37,16 +44,20 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
-#include <mach/mx31.h>
+#include <mach/mxc_ehci.h>
+#include <mach/mx3_camera.h>
+#include <mach/spi.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
 static unsigned int moboard_pins[] = {
 	/* UART0 */
-	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS1__GPIO2_7,
 	/* UART4 */
 	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
 	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
@@ -73,12 +84,31 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
 	MX31_PIN_USB_OC__GPIO1_30,
+	/* USB H2 */
+	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
+	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
+	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
+	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
+	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
+	MX31_PIN_SCK6__GPIO1_25,
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
 	/* SEL */
 	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+	/* SPI1 */
+	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
+	/* Atlas IRQ */
+	MX31_PIN_GPIO1_3__GPIO1_3,
+	/* SPI2 */
+	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
+	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -101,7 +131,18 @@ static struct platform_device mx31moboard_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static int moboard_uart0_init(struct platform_device *pdev)
+{
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	return 0;
+}
+
+static struct imxuart_platform_data uart0_pdata = {
+	.init = moboard_uart0_init,
+};
+
+static struct imxuart_platform_data uart4_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -113,6 +154,103 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = {
 	.bitrate = 100000,
 };
 
+static int moboard_spi1_cs[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master moboard_spi1_master = {
+	.chipselect	= moboard_spi1_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
+};
+
+static struct regulator_consumer_supply sdhc_consumers[] = {
+	{
+		.dev	= &mxcsdhc_device0.dev,
+		.supply	= "sdhc0_vcc",
+	},
+	{
+		.dev	= &mxcsdhc_device1.dev,
+		.supply	= "sdhc1_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
+	.consumer_supplies = sdhc_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= &mx3_camera.dev,
+		.supply	= "cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+static struct mc13783_regulator_init_data moboard_regulators[] = {
+	{
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc_vreg_data,
+	},
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_vreg_data,
+	},
+};
+
+static struct mc13783_platform_data moboard_pmic = {
+	.regulators = moboard_regulators,
+	.num_regulators = ARRAY_SIZE(moboard_regulators),
+	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC,
+		MC13783_USE_ADC,
+};
+
+static struct spi_board_info moboard_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.platform_data = &moboard_pmic,
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+static int moboard_spi2_cs[] = {
+	MXC_SPI_CS(1),
+};
+
+static struct spi_imx_master moboard_spi2_master = {
+	.chipselect	= moboard_spi2_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
+};
+
 #define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
 #define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
 
@@ -208,6 +346,56 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int moboard_usbh2_hw_init(struct platform_device *pdev)
+{
+	int ret = gpio_request(USBH2_EN_B, "usbh2-en");
+	if (ret)
+		return ret;
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	gpio_direction_output(USBH2_EN_B, 0);
+
+	return 0;
+}
+
+static int moboard_usbh2_hw_exit(struct platform_device *pdev)
+{
+	gpio_free(USBH2_EN_B);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= moboard_usbh2_hw_init,
+	.exit	= moboard_usbh2_hw_exit,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init moboard_usbh2_init(void)
+{
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+}
+
+
 static struct gpio_led mx31moboard_leds[] = {
 	{
 		.name 	= "coreboard-led-0:red:running",
@@ -266,11 +454,48 @@ static void mx31moboard_init_sel_gpios(void)
 	}
 }
 
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 	&mx31moboard_leds_device,
 };
 
+static struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 4800,
+};
+
+#define CAMERA_BUF_SIZE	(4*1024*1024)
+
+static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static int mx31moboard_baseboard;
 core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
 
@@ -284,20 +509,34 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+
+	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
 
 	mx31moboard_init_sel_gpios();
 
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
+	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
+	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(moboard_spi_board_info,
+		ARRAY_SIZE(moboard_spi_board_info));
+
 	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
+		mxc_register_device(&mx3_camera, &camera_pdata);
+
 	usb_xcvr_reset();
 
 	moboard_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	moboard_usbh2_init();
 
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:

arch/arm/mach-mx3/pcm043.c

@@ -43,6 +43,7 @@
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
 
@@ -206,6 +207,11 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 /*
  * Board specific initialization.
  */
@@ -216,6 +222,7 @@ static void __init mxc_board_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 

arch/arm/plat-mxc/Kconfig

@@ -69,10 +69,20 @@ config MXC_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config MXC_ULPI
+	bool
+
 config ARCH_HAS_RNGA
 	bool
 	depends on ARCH_MXC
 
 config ARCH_MXC_IOMUX_V3
 	bool
+
+config ARCH_MXC_AUDMUX_V1
+	bool
+
+config ARCH_MXC_AUDMUX_V2
+	bool
+
 endif

arch/arm/plat-mxc/Makefile

@@ -9,3 +9,6 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o

arch/arm/plat-mxc/audmux-v1.c

@@ -0,0 +1,53 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static void __iomem *audmux_base;
+
+#define MXC_AUDMUX_V1_PCR(x)	((x) * 4)
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
+{
+	if (!audmux_base) {
+		printk("%s: not configured\n", __func__);
+		return -ENOSYS;
+	}
+
+	writel(pcr, audmux_base + MXC_AUDMUX_V1_PCR(port));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
+
+static int mxc_audmux_v1_init(void)
+{
+	if (cpu_is_mx27() || cpu_is_mx21())
+		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+	return 0;
+}
+
+postcore_initcall(mxc_audmux_v1_init);

arch/arm/plat-mxc/audmux-v2.c

@@ -0,0 +1,74 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static struct clk *audmux_clk;
+static void __iomem *audmux_base;
+
+#define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
+#define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr)
+{
+	if (!audmux_base)
+		return -ENOSYS;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
+
+static int mxc_audmux_v2_init(void)
+{
+	int ret;
+
+	if (cpu_is_mx35()) {
+		audmux_clk = clk_get(NULL, "audmux");
+		if (IS_ERR(audmux_clk)) {
+			ret = PTR_ERR(audmux_clk);
+			printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
+					ret);
+			return ret;
+		}
+	}
+
+	if (cpu_is_mx31() || cpu_is_mx35())
+		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+
+	return 0;
+}
+
+postcore_initcall(mxc_audmux_v2_init);

arch/arm/plat-mxc/dma-mx1-mx2.c

@@ -156,7 +156,8 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
 	}
 
 	now = min(imxdma->resbytes, sg->length);
-	imxdma->resbytes -= now;
+	if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP)
+		imxdma->resbytes -= now;
 
 	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
 		__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));

arch/arm/plat-mxc/gpio.c

@@ -282,7 +282,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		for (j = port[i].virtual_irq_start;
 			j < port[i].virtual_irq_start + 32; j++) {
 			set_irq_chip(j, &gpio_irq_chip);
-			set_irq_handler(j, handle_edge_irq);
+			set_irq_handler(j, handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);
 		}
 

arch/arm/plat-mxc/include/mach/audmux.h

@@ -0,0 +1,52 @@
+#ifndef __MACH_AUDMUX_H
+#define __MACH_AUDMUX_H
+
+#define MX27_AUDMUX_HPCR1_SSI0		0
+#define MX27_AUDMUX_HPCR2_SSI1		1
+#define MX27_AUDMUX_HPCR3_SSI_PINS_4	2
+#define MX27_AUDMUX_PPCR1_SSI_PINS_1	3
+#define MX27_AUDMUX_PPCR2_SSI_PINS_2	4
+#define MX27_AUDMUX_PPCR3_SSI_PINS_3	5
+
+#define MX31_AUDMUX_PORT1_SSI0		0
+#define MX31_AUDMUX_PORT2_SSI1		1
+#define MX31_AUDMUX_PORT3_SSI_PINS_3	2
+#define MX31_AUDMUX_PORT4_SSI_PINS_4	3
+#define MX31_AUDMUX_PORT5_SSI_PINS_5	4
+#define MX31_AUDMUX_PORT6_SSI_PINS_6	5
+
+/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
+#define MXC_AUDMUX_V1_PCR_INMEN		(1 << 8)
+#define MXC_AUDMUX_V1_PCR_TXRXEN	(1 << 10)
+#define MXC_AUDMUX_V1_PCR_SYN		(1 << 12)
+#define MXC_AUDMUX_V1_PCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V1_PCR_RFCSEL(x)	(((x) & 0xf) << 20)
+#define MXC_AUDMUX_V1_PCR_RCLKDIR	(1 << 24)
+#define MXC_AUDMUX_V1_PCR_RFSDIR	(1 << 25)
+#define MXC_AUDMUX_V1_PCR_TFCSEL(x)	(((x) & 0xf) << 26)
+#define MXC_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
+#define MXC_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
+
+/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
+#define MXC_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
+#define MXC_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
+#define MXC_AUDMUX_V2_PTCR_TCSEL(x)	(((x) & 0xf) << 22)
+#define MXC_AUDMUX_V2_PTCR_RFSDIR	(1 << 21)
+#define MXC_AUDMUX_V2_PTCR_RFSEL(x)	(((x) & 0xf) << 17)
+#define MXC_AUDMUX_V2_PTCR_RCLKDIR	(1 << 16)
+#define MXC_AUDMUX_V2_PTCR_RCSEL(x)	(((x) & 0xf) << 12)
+#define MXC_AUDMUX_V2_PTCR_SYN		(1 << 11)
+
+#define MXC_AUDMUX_V2_PDCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V2_PDCR_TXRXEN	(1 << 12)
+#define MXC_AUDMUX_V2_PDCR_MODE(x)	(((x) & 0x3) << 8)
+#define MXC_AUDMUX_V2_PDCR_INMMASK(x)	((x) & 0xff)
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr);
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr);
+
+#endif /* __MACH_AUDMUX_H */

arch/arm/plat-mxc/include/mach/board-mx31lite.h

@@ -1,15 +1,42 @@
 /*
  * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
  */
 
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+	MX31LITE_NOBOARD	= 0,
+	MX31LITE_DB		= 1,
+};
+
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+extern void mx31lite_db_init(void);
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
+#endif
 
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */

arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h

@@ -58,6 +58,14 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address,
 		unsigned int dma_length, unsigned int dev_addr,
 		unsigned int dmamode);
 
+
+/*
+ * Use this flag as the dma_length argument to imx_dma_setup_sg()
+ * to create an endless running dma loop. The end of the scatterlist
+ * must be linked to the beginning for this to work.
+ */
+#define IMX_DMA_LENGTH_LOOP	((unsigned int)-1)
+
 int
 imx_dma_setup_sg(int channel, struct scatterlist *sg,
 		unsigned int sgcount, unsigned int dma_length,

arch/arm/plat-mxc/include/mach/iomux-mx3.h

@@ -623,6 +623,8 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__GPIO3_4	IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D5__GPIO3_5	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
@@ -642,12 +644,22 @@ enum iomux_pins {
 #define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_SFS6__USBH1_SUSPEND	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_NFRE_B__GPIO1_11	IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_NFALE__GPIO1_12	IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD3__USBH2_DATA2	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD3__USBH2_DATA3	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK3__USBH2_DATA4	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS3__USBH2_DATA5	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD6__USBH2_DATA6	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD6__USBH2_DATA7	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK6__GPIO1_25		IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
@@ -693,7 +705,19 @@ enum iomux_pins {
 #define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
-
+#define MX31_PIN_GPIO1_3__GPIO1_3	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSPI2_SS1__CSPI3_SS1	IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_RTS1__GPIO2_6		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CTS1__GPIO2_7		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_LCS0__GPIO3_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD4__STXD4		IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD4__SRXD4		IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK4__SCK4		IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS4__SFS4		IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD5__STXD5		IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD5__SRXD5		IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK5__SCK5		IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS5__SFS5		IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/

arch/arm/plat-mxc/include/mach/iomux-v3.h

@@ -88,9 +88,7 @@ struct pad_desc {
 #define PAD_CTL_SRE_FAST		(1 << 0)
 
 /*
- * setups a single pad:
- * 	- reserves the pad so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
  */
 int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
 
@@ -100,19 +98,6 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
  */
 int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
 
-/*
- * releases a single pad:
- * 	- make it available for a future use by another driver
- * 	- DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_v3_release_pad(struct pad_desc *pad);
-
-/*
- * releases multiple pads
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
-
 /*
  * Initialise the iomux controller
  */

arch/arm/plat-mxc/include/mach/mx21.h

@@ -25,46 +25,191 @@
 #ifndef __ASM_ARCH_MXC_MX21_H__
 #define __ASM_ARCH_MXC_MX21_H__
 
+#define MX21_AIPI_BASE_ADDR		0x10000000
+#define MX21_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX21_AIPI_SIZE			SZ_1M
+#define MX21_DMA_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x01000)
+#define MX21_WDOG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x02000)
+#define MX21_GPT1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x03000)
+#define MX21_GPT2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x04000)
+#define MX21_GPT3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x05000)
+#define MX21_PWM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x06000)
+#define MX21_RTC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x07000)
+#define MX21_KPP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x08000)
+#define MX21_OWIRE_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x09000)
+#define MX21_UART1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0a000)
+#define MX21_UART2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0b000)
+#define MX21_UART3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0c000)
+#define MX21_UART4_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0d000)
+#define MX21_CSPI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0e000)
+#define MX21_CSPI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0f000)
+#define MX21_SSI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x10000)
+#define MX21_SSI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x11000)
+#define MX21_I2C_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x12000)
+#define MX21_SDHC1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x13000)
+#define MX21_SDHC2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x14000)
+#define MX21_GPIO_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x15000)
+#define MX21_AUDMUX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x16000)
+#define MX21_CSPI3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x17000)
+#define MX21_LCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x21000)
+#define MX21_SLCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x22000)
+#define MX21_USBOTG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x24000)
+#define MX21_EMMA_PP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26000)
+#define MX21_EMMA_PRP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26400)
+#define MX21_CCM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27000)
+#define MX21_SYSCTRL_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27800)
+#define MX21_JAM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3e000)
+#define MX21_MAX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX21_AVIC_BASE_ADDR		0x10040000
+
+#define MX21_SAHB1_BASE_ADDR		0x80000000
+#define MX21_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX21_SAHB1_SIZE			SZ_1M
+#define MX21_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
+
 /* Memory regions and CS */
-#define SDRAM_BASE_ADDR         0xC0000000
-#define CSD1_BASE_ADDR          0xC4000000
+#define MX21_SDRAM_BASE_ADDR		0xc0000000
+#define MX21_CSD1_BASE_ADDR		0xc4000000
 
-#define CS0_BASE_ADDR           0xC8000000
-#define CS1_BASE_ADDR           0xCC000000
-#define CS2_BASE_ADDR           0xD0000000
-#define CS3_BASE_ADDR           0xD1000000
-#define CS4_BASE_ADDR           0xD2000000
-#define CS5_BASE_ADDR           0xDD000000
-#define PCMCIA_MEM_BASE_ADDR    0xD4000000
+#define MX21_CS0_BASE_ADDR		0xc8000000
+#define MX21_CS1_BASE_ADDR		0xcc000000
+#define MX21_CS2_BASE_ADDR		0xd0000000
+#define MX21_CS3_BASE_ADDR		0xd1000000
+#define MX21_CS4_BASE_ADDR		0xd2000000
+#define MX21_PCMCIA_MEM_BASE_ADDR	0xd4000000
+#define MX21_CS5_BASE_ADDR		0xdd000000
 
 /* NAND, SDRAM, WEIM etc controllers */
-#define X_MEMC_BASE_ADDR        0xDF000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_256K
+#define MX21_X_MEMC_BASE_ADDR		0xdf000000
+#define MX21_X_MEMC_BASE_ADDR_VIRT	0xf4200000
+#define MX21_X_MEMC_SIZE		SZ_256K
 
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x0000)
-#define EIM_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x1000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x2000)
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x3000)
+#define MX21_SDRAMC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x0000)
+#define MX21_EIM_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x1000)
+#define MX21_PCMCIA_CTL_BASE_ADDR	(MX21_X_MEMC_BASE_ADDR + 0x2000)
+#define MX21_NFC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x3000)
 
-#define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
+#define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
 
 /* fixed interrupt numbers */
-#define MXC_INT_USBCTRL         58
-#define MXC_INT_USBCTRL         58
-#define MXC_INT_USBMNP          57
-#define MXC_INT_USBFUNC         56
-#define MXC_INT_USBHOST         55
-#define MXC_INT_USBDMA          54
-#define MXC_INT_USBWKUP         53
-#define MXC_INT_EMMADEC         50
-#define MXC_INT_EMMAENC         49
-#define MXC_INT_BMI             30
-#define MXC_INT_FIRI            9
+#define MX21_INT_CSPI3		6
+#define MX21_INT_GPIO		8
+#define MX21_INT_FIRI		9
+#define MX21_INT_SDHC2		10
+#define MX21_INT_SDHC1		11
+#define MX21_INT_I2C		12
+#define MX21_INT_SSI2		13
+#define MX21_INT_SSI1		14
+#define MX21_INT_CSPI2		15
+#define MX21_INT_CSPI1		16
+#define MX21_INT_UART4		17
+#define MX21_INT_UART3		18
+#define MX21_INT_UART2		19
+#define MX21_INT_UART1		20
+#define MX21_INT_KPP		21
+#define MX21_INT_RTC		22
+#define MX21_INT_PWM		23
+#define MX21_INT_GPT3		24
+#define MX21_INT_GPT2		25
+#define MX21_INT_GPT1		26
+#define MX21_INT_WDOG		27
+#define MX21_INT_PCMCIA		28
+#define MX21_INT_NANDFC		29
+#define MX21_INT_BMI		30
+#define MX21_INT_CSI		31
+#define MX21_INT_DMACH0		32
+#define MX21_INT_DMACH1		33
+#define MX21_INT_DMACH2		34
+#define MX21_INT_DMACH3		35
+#define MX21_INT_DMACH4		36
+#define MX21_INT_DMACH5		37
+#define MX21_INT_DMACH6		38
+#define MX21_INT_DMACH7		39
+#define MX21_INT_DMACH8		40
+#define MX21_INT_DMACH9		41
+#define MX21_INT_DMACH10	42
+#define MX21_INT_DMACH11	43
+#define MX21_INT_DMACH12	44
+#define MX21_INT_DMACH13	45
+#define MX21_INT_DMACH14	46
+#define MX21_INT_DMACH15	47
+#define MX21_INT_EMMAENC	49
+#define MX21_INT_EMMADEC	50
+#define MX21_INT_EMMAPRP	51
+#define MX21_INT_EMMAPP		52
+#define MX21_INT_USBWKUP	53
+#define MX21_INT_USBDMA		54
+#define MX21_INT_USBHOST	55
+#define MX21_INT_USBFUNC	56
+#define MX21_INT_USBMNP		57
+#define MX21_INT_USBCTRL	58
+#define MX21_INT_SLCDC		60
+#define MX21_INT_LCDC		61
 
 /* fixed DMA request numbers */
-#define DMA_REQ_BMI_RX          29
-#define DMA_REQ_BMI_TX          28
-#define DMA_REQ_FIRI_RX         4
+#define MX21_DMA_REQ_CSPI3_RX	1
+#define MX21_DMA_REQ_CSPI3_TX	2
+#define MX21_DMA_REQ_EXT	3
+#define MX21_DMA_REQ_FIRI_RX	4
+#define MX21_DMA_REQ_SDHC2	6
+#define MX21_DMA_REQ_SDHC1	7
+#define MX21_DMA_REQ_SSI2_RX0	8
+#define MX21_DMA_REQ_SSI2_TX0	9
+#define MX21_DMA_REQ_SSI2_RX1	10
+#define MX21_DMA_REQ_SSI2_TX1	11
+#define MX21_DMA_REQ_SSI1_RX0	12
+#define MX21_DMA_REQ_SSI1_TX0	13
+#define MX21_DMA_REQ_SSI1_RX1	14
+#define MX21_DMA_REQ_SSI1_TX1	15
+#define MX21_DMA_REQ_CSPI2_RX	16
+#define MX21_DMA_REQ_CSPI2_TX	17
+#define MX21_DMA_REQ_CSPI1_RX	18
+#define MX21_DMA_REQ_CSPI1_TX	19
+#define MX21_DMA_REQ_UART4_RX	20
+#define MX21_DMA_REQ_UART4_TX	21
+#define MX21_DMA_REQ_UART3_RX	22
+#define MX21_DMA_REQ_UART3_TX	23
+#define MX21_DMA_REQ_UART2_RX	24
+#define MX21_DMA_REQ_UART2_TX	25
+#define MX21_DMA_REQ_UART1_RX	26
+#define MX21_DMA_REQ_UART1_TX	27
+#define MX21_DMA_REQ_BMI_TX	28
+#define MX21_DMA_REQ_BMI_RX	29
+#define MX21_DMA_REQ_CSI_STAT	30
+#define MX21_DMA_REQ_CSI_RX	31
+
+/* these should go away */
+#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX21_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX21_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX21_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX21_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX21_CS4_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR
+#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX21_X_MEMC_SIZE
+#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR
+#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX21_PCMCIA_CTL_BASE_ADDR
+#define NFC_BASE_ADDR MX21_NFC_BASE_ADDR
+#define IRAM_BASE_ADDR MX21_IRAM_BASE_ADDR
+#define MXC_INT_FIRI MX21_INT_FIRI
+#define MXC_INT_BMI MX21_INT_BMI
+#define MXC_INT_EMMAENC MX21_INT_EMMAENC
+#define MXC_INT_EMMADEC MX21_INT_EMMADEC
+#define MXC_INT_USBWKUP MX21_INT_USBWKUP
+#define MXC_INT_USBDMA MX21_INT_USBDMA
+#define MXC_INT_USBHOST MX21_INT_USBHOST
+#define MXC_INT_USBFUNC MX21_INT_USBFUNC
+#define MXC_INT_USBMNP MX21_INT_USBMNP
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
+#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
+#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
 
 #endif /* __ASM_ARCH_MXC_MX21_H__ */

arch/arm/plat-mxc/include/mach/mx25.h

@@ -1,14 +1,14 @@
 #ifndef __MACH_MX25_H__
 #define __MACH_MX25_H__
 
-#define MX25_AIPS1_BASE_ADDR		0x43F00000
-#define MX25_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MX25_AIPS1_BASE_ADDR		0x43f00000
+#define MX25_AIPS1_BASE_ADDR_VIRT	0xfc000000
 #define MX25_AIPS1_SIZE			SZ_1M
-#define MX25_AIPS2_BASE_ADDR		0x53F00000
-#define MX25_AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define MX25_AIPS2_BASE_ADDR		0x53f00000
+#define MX25_AIPS2_BASE_ADDR_VIRT	0xfc200000
 #define MX25_AIPS2_SIZE			SZ_1M
 #define MX25_AVIC_BASE_ADDR		0x68000000
-#define MX25_AVIC_BASE_ADDR_VIRT	0xFC400000
+#define MX25_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX25_AVIC_SIZE			SZ_1M
 
 #define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)

arch/arm/plat-mxc/include/mach/mx27.h

@@ -24,87 +24,198 @@
 #ifndef __ASM_ARCH_MXC_MX27_H__
 #define __ASM_ARCH_MXC_MX27_H__
 
-/* IRAM */
-#define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
-
-#define MSHC_BASE_ADDR          (AIPI_BASE_ADDR + 0x18000)
-#define GPT5_BASE_ADDR          (AIPI_BASE_ADDR + 0x19000)
-#define GPT4_BASE_ADDR          (AIPI_BASE_ADDR + 0x1A000)
-#define UART5_BASE_ADDR         (AIPI_BASE_ADDR + 0x1B000)
-#define UART6_BASE_ADDR         (AIPI_BASE_ADDR + 0x1C000)
-#define I2C2_BASE_ADDR          (AIPI_BASE_ADDR + 0x1D000)
-#define SDHC3_BASE_ADDR         (AIPI_BASE_ADDR + 0x1E000)
-#define GPT6_BASE_ADDR          (AIPI_BASE_ADDR + 0x1F000)
-#define VPU_BASE_ADDR           (AIPI_BASE_ADDR + 0x23000)
-#define OTG_BASE_ADDR           USBOTG_BASE_ADDR
-#define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
-#define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
-#define RTIC_BASE_ADDR          (AIPI_BASE_ADDR + 0x2A000)
-#define FEC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2B000)
-#define SCC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2C000)
-#define ETB_BASE_ADDR           (AIPI_BASE_ADDR + 0x3B000)
-#define ETB_RAM_BASE_ADDR       (AIPI_BASE_ADDR + 0x3C000)
+#define MX27_AIPI_BASE_ADDR		0x10000000
+#define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX27_AIPI_SIZE			SZ_1M
+#define MX27_DMA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x01000)
+#define MX27_WDOG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x02000)
+#define MX27_GPT1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x03000)
+#define MX27_GPT2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x04000)
+#define MX27_GPT3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x05000)
+#define MX27_PWM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x06000)
+#define MX27_RTC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x07000)
+#define MX27_KPP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x08000)
+#define MX27_OWIRE_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x09000)
+#define MX27_UART1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0a000)
+#define MX27_UART2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0b000)
+#define MX27_UART3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0c000)
+#define MX27_UART4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0d000)
+#define MX27_CSPI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0e000)
+#define MX27_CSPI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0f000)
+#define MX27_SSI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x10000)
+#define MX27_SSI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x11000)
+#define MX27_I2C_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_SDHC1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x13000)
+#define MX27_SDHC2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x14000)
+#define MX27_GPIO_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x15000)
+#define MX27_AUDMUX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x16000)
+#define MX27_CSPI3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x17000)
+#define MX27_MSHC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x18000)
+#define MX27_GPT5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x19000)
+#define MX27_GPT4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1a000)
+#define MX27_UART5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1b000)
+#define MX27_UART6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1c000)
+#define MX27_I2C2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1d000)
+#define MX27_SDHC3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1e000)
+#define MX27_GPT6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1f000)
+#define MX27_LCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x21000)
+#define MX27_SLCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x22000)
+#define MX27_VPU_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x23000)
+#define MX27_USBOTG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x24000)
+#define MX27_OTG_BASE_ADDR			MX27_USBOTG_BASE_ADDR
+#define MX27_SAHARA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x25000)
+#define MX27_EMMA_PP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26000)
+#define MX27_EMMA_PRP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26400)
+#define MX27_CCM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27000)
+#define MX27_SYSCTRL_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27800)
+#define MX27_IIM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x28000)
+#define MX27_RTIC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2a000)
+#define MX27_FEC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2b000)
+#define MX27_SCC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2c000)
+#define MX27_ETB_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3b000)
+#define MX27_ETB_RAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3c000)
+#define MX27_JAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3e000)
+#define MX27_MAX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX27_AVIC_BASE_ADDR		0x10040000
 
 /* ROM patch */
-#define ROMP_BASE_ADDR          0x10041000
+#define MX27_ROMP_BASE_ADDR		0x10041000
 
-#define ATA_BASE_ADDR           (SAHB1_BASE_ADDR + 0x1000)
+#define MX27_SAHB1_BASE_ADDR		0x80000000
+#define MX27_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX27_SAHB1_SIZE			SZ_1M
+#define MX27_CSI_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x0000)
+#define MX27_ATA_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x1000)
 
 /* Memory regions and CS */
-#define SDRAM_BASE_ADDR         0xA0000000
-#define CSD1_BASE_ADDR          0xB0000000
+#define MX27_SDRAM_BASE_ADDR		0xa0000000
+#define MX27_CSD1_BASE_ADDR		0xb0000000
 
-#define CS0_BASE_ADDR           0xC0000000
-#define CS1_BASE_ADDR           0xC8000000
-#define CS2_BASE_ADDR           0xD0000000
-#define CS3_BASE_ADDR           0xD2000000
-#define CS4_BASE_ADDR           0xD4000000
-#define CS5_BASE_ADDR           0xD6000000
-#define PCMCIA_MEM_BASE_ADDR    0xDC000000
+#define MX27_CS0_BASE_ADDR		0xc0000000
+#define MX27_CS1_BASE_ADDR		0xc8000000
+#define MX27_CS2_BASE_ADDR		0xd0000000
+#define MX27_CS3_BASE_ADDR		0xd2000000
+#define MX27_CS4_BASE_ADDR		0xd4000000
+#define MX27_CS5_BASE_ADDR		0xd6000000
 
 /* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define X_MEMC_BASE_ADDR        0xD8000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_1M
+#define MX27_X_MEMC_BASE_ADDR		0xd8000000
+#define MX27_X_MEMC_BASE_ADDR_VIRT	0xf4200000
+#define MX27_X_MEMC_SIZE		SZ_1M
+#define MX27_NFC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR)
+#define MX27_SDRAMC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x1000)
+#define MX27_WEIM_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x2000)
+#define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
+#define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
 
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
+#define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
+
+/* IRAM */
+#define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
 
 /* fixed interrupt numbers */
-#define MXC_INT_CCM		63
-#define MXC_INT_IIM		62
-#define MXC_INT_SAHARA		59
-#define MXC_INT_SCC_SCM		58
-#define MXC_INT_SCC_SMN		57
-#define MXC_INT_USB3		56
-#define MXC_INT_USB2		55
-#define MXC_INT_USB1		54
-#define MXC_INT_VPU		53
-#define MXC_INT_FEC		50
-#define MXC_INT_UART5		49
-#define MXC_INT_UART6		48
-#define MXC_INT_ATA		30
-#define MXC_INT_SDHC3		9
-#define MXC_INT_SDHC		7
-#define MXC_INT_RTIC		5
-#define MXC_INT_GPT4		4
-#define MXC_INT_GPT5		3
-#define MXC_INT_GPT6		2
-#define MXC_INT_I2C2		1
+#define MX27_INT_I2C2		1
+#define MX27_INT_GPT6		2
+#define MX27_INT_GPT5		3
+#define MX27_INT_GPT4		4
+#define MX27_INT_RTIC		5
+#define MX27_INT_CSPI3		6
+#define MX27_INT_SDHC		7
+#define MX27_INT_GPIO		8
+#define MX27_INT_SDHC3		9
+#define MX27_INT_SDHC2		10
+#define MX27_INT_SDHC1		11
+#define MX27_INT_I2C		12
+#define MX27_INT_SSI2		13
+#define MX27_INT_SSI1		14
+#define MX27_INT_CSPI2		15
+#define MX27_INT_CSPI1		16
+#define MX27_INT_UART4		17
+#define MX27_INT_UART3		18
+#define MX27_INT_UART2		19
+#define MX27_INT_UART1		20
+#define MX27_INT_KPP		21
+#define MX27_INT_RTC		22
+#define MX27_INT_PWM		23
+#define MX27_INT_GPT3		24
+#define MX27_INT_GPT2		25
+#define MX27_INT_GPT1		26
+#define MX27_INT_WDOG		27
+#define MX27_INT_PCMCIA		28
+#define MX27_INT_NANDFC		29
+#define MX27_INT_ATA		30
+#define MX27_INT_CSI		31
+#define MX27_INT_DMACH0		32
+#define MX27_INT_DMACH1		33
+#define MX27_INT_DMACH2		34
+#define MX27_INT_DMACH3		35
+#define MX27_INT_DMACH4		36
+#define MX27_INT_DMACH5		37
+#define MX27_INT_DMACH6		38
+#define MX27_INT_DMACH7		39
+#define MX27_INT_DMACH8		40
+#define MX27_INT_DMACH9		41
+#define MX27_INT_DMACH10	42
+#define MX27_INT_DMACH11	43
+#define MX27_INT_DMACH12	44
+#define MX27_INT_DMACH13	45
+#define MX27_INT_DMACH14	46
+#define MX27_INT_DMACH15	47
+#define MX27_INT_UART6		48
+#define MX27_INT_UART5		49
+#define MX27_INT_FEC		50
+#define MX27_INT_EMMAPRP	51
+#define MX27_INT_EMMAPP		52
+#define MX27_INT_VPU		53
+#define MX27_INT_USB1		54
+#define MX27_INT_USB2		55
+#define MX27_INT_USB3		56
+#define MX27_INT_SCC_SMN	57
+#define MX27_INT_SCC_SCM	58
+#define MX27_INT_SAHARA		59
+#define MX27_INT_SLCDC		60
+#define MX27_INT_LCDC		61
+#define MX27_INT_IIM		62
+#define MX27_INT_CCM		63
 
 /* fixed DMA request numbers */
-#define DMA_REQ_NFC             37
-#define DMA_REQ_SDHC3           36
-#define DMA_REQ_UART6_RX        35
-#define DMA_REQ_UART6_TX        34
-#define DMA_REQ_UART5_RX        33
-#define DMA_REQ_UART5_TX        32
-#define DMA_REQ_ATA_RCV         29
-#define DMA_REQ_ATA_TX          28
-#define DMA_REQ_MSHC            4
+#define MX27_DMA_REQ_CSPI3_RX	1
+#define MX27_DMA_REQ_CSPI3_TX	2
+#define MX27_DMA_REQ_EXT	3
+#define MX27_DMA_REQ_MSHC	4
+#define MX27_DMA_REQ_SDHC2	6
+#define MX27_DMA_REQ_SDHC1	7
+#define MX27_DMA_REQ_SSI2_RX0	8
+#define MX27_DMA_REQ_SSI2_TX0	9
+#define MX27_DMA_REQ_SSI2_RX1	10
+#define MX27_DMA_REQ_SSI2_TX1	11
+#define MX27_DMA_REQ_SSI1_RX0	12
+#define MX27_DMA_REQ_SSI1_TX0	13
+#define MX27_DMA_REQ_SSI1_RX1	14
+#define MX27_DMA_REQ_SSI1_TX1	15
+#define MX27_DMA_REQ_CSPI2_RX	16
+#define MX27_DMA_REQ_CSPI2_TX	17
+#define MX27_DMA_REQ_CSPI1_RX	18
+#define MX27_DMA_REQ_CSPI1_TX	19
+#define MX27_DMA_REQ_UART4_RX	20
+#define MX27_DMA_REQ_UART4_TX	21
+#define MX27_DMA_REQ_UART3_RX	22
+#define MX27_DMA_REQ_UART3_TX	23
+#define MX27_DMA_REQ_UART2_RX	24
+#define MX27_DMA_REQ_UART2_TX	25
+#define MX27_DMA_REQ_UART1_RX	26
+#define MX27_DMA_REQ_UART1_TX	27
+#define MX27_DMA_REQ_ATA_TX	28
+#define MX27_DMA_REQ_ATA_RCV	29
+#define MX27_DMA_REQ_CSI_STAT	30
+#define MX27_DMA_REQ_CSI_RX	31
+#define MX27_DMA_REQ_UART5_TX	32
+#define MX27_DMA_REQ_UART5_RX	33
+#define MX27_DMA_REQ_UART6_TX	34
+#define MX27_DMA_REQ_UART6_RX	35
+#define MX27_DMA_REQ_SDHC3	36
+#define MX27_DMA_REQ_NFC	37
 
 /* silicon revisions specific to i.MX27 */
 #define CHIP_REV_1_0		0x00
@@ -114,6 +225,72 @@
 extern int mx27_revision(void);
 #endif
 
-/* Mandatory defines used globally */
+/* these should go away */
+#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
+#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
+#define GPT4_BASE_ADDR MX27_GPT4_BASE_ADDR
+#define UART5_BASE_ADDR MX27_UART5_BASE_ADDR
+#define UART6_BASE_ADDR MX27_UART6_BASE_ADDR
+#define I2C2_BASE_ADDR MX27_I2C2_BASE_ADDR
+#define SDHC3_BASE_ADDR MX27_SDHC3_BASE_ADDR
+#define GPT6_BASE_ADDR MX27_GPT6_BASE_ADDR
+#define VPU_BASE_ADDR MX27_VPU_BASE_ADDR
+#define OTG_BASE_ADDR MX27_OTG_BASE_ADDR
+#define SAHARA_BASE_ADDR MX27_SAHARA_BASE_ADDR
+#define IIM_BASE_ADDR MX27_IIM_BASE_ADDR
+#define RTIC_BASE_ADDR MX27_RTIC_BASE_ADDR
+#define FEC_BASE_ADDR MX27_FEC_BASE_ADDR
+#define SCC_BASE_ADDR MX27_SCC_BASE_ADDR
+#define ETB_BASE_ADDR MX27_ETB_BASE_ADDR
+#define ETB_RAM_BASE_ADDR MX27_ETB_RAM_BASE_ADDR
+#define ROMP_BASE_ADDR MX27_ROMP_BASE_ADDR
+#define ATA_BASE_ADDR MX27_ATA_BASE_ADDR
+#define SDRAM_BASE_ADDR MX27_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX27_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX27_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX27_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX27_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX27_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR
+#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX27_X_MEMC_SIZE
+#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR
+#define WEIM_BASE_ADDR MX27_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX27_M3IF_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX27_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX27_PCMCIA_MEM_BASE_ADDR
+#define IRAM_BASE_ADDR MX27_IRAM_BASE_ADDR
+#define MXC_INT_I2C2 MX27_INT_I2C2
+#define MXC_INT_GPT6 MX27_INT_GPT6
+#define MXC_INT_GPT5 MX27_INT_GPT5
+#define MXC_INT_GPT4 MX27_INT_GPT4
+#define MXC_INT_RTIC MX27_INT_RTIC
+#define MXC_INT_SDHC MX27_INT_SDHC
+#define MXC_INT_SDHC3 MX27_INT_SDHC3
+#define MXC_INT_ATA MX27_INT_ATA
+#define MXC_INT_UART6 MX27_INT_UART6
+#define MXC_INT_UART5 MX27_INT_UART5
+#define MXC_INT_FEC MX27_INT_FEC
+#define MXC_INT_VPU MX27_INT_VPU
+#define MXC_INT_USB1 MX27_INT_USB1
+#define MXC_INT_USB2 MX27_INT_USB2
+#define MXC_INT_USB3 MX27_INT_USB3
+#define MXC_INT_SCC_SMN MX27_INT_SCC_SMN
+#define MXC_INT_SCC_SCM MX27_INT_SCC_SCM
+#define MXC_INT_SAHARA MX27_INT_SAHARA
+#define MXC_INT_IIM MX27_INT_IIM
+#define MXC_INT_CCM MX27_INT_CCM
+#define DMA_REQ_MSHC MX27_DMA_REQ_MSHC
+#define DMA_REQ_ATA_TX MX27_DMA_REQ_ATA_TX
+#define DMA_REQ_ATA_RCV MX27_DMA_REQ_ATA_RCV
+#define DMA_REQ_UART5_TX MX27_DMA_REQ_UART5_TX
+#define DMA_REQ_UART5_RX MX27_DMA_REQ_UART5_RX
+#define DMA_REQ_UART6_TX MX27_DMA_REQ_UART6_TX
+#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
+#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
+#define DMA_REQ_NFC MX27_DMA_REQ_NFC
 
 #endif /* __ASM_ARCH_MXC_MX27_H__ */

arch/arm/plat-mxc/include/mach/mx2x.h

@@ -26,50 +26,48 @@
 /* The following addresses are common between i.MX21 and i.MX27 */
 
 /* Register offests */
-#define AIPI_BASE_ADDR          0x10000000
-#define AIPI_BASE_ADDR_VIRT     0xF4000000
-#define AIPI_SIZE               SZ_1M
-
-#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
-#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
-#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
-#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
-#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
-#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
-#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
-
-#define AVIC_BASE_ADDR          0x10040000
-
-#define SAHB1_BASE_ADDR         0x80000000
-#define SAHB1_BASE_ADDR_VIRT    0xF4100000
-#define SAHB1_SIZE              SZ_1M
-
-#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
+#define MX2x_AIPI_BASE_ADDR		0x10000000
+#define MX2x_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX2x_AIPI_SIZE			SZ_1M
+#define MX2x_DMA_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x01000)
+#define MX2x_WDOG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x02000)
+#define MX2x_GPT1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x03000)
+#define MX2x_GPT2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x04000)
+#define MX2x_GPT3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x05000)
+#define MX2x_PWM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x06000)
+#define MX2x_RTC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x07000)
+#define MX2x_KPP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x08000)
+#define MX2x_OWIRE_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x09000)
+#define MX2x_UART1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0a000)
+#define MX2x_UART2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0b000)
+#define MX2x_UART3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0c000)
+#define MX2x_UART4_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0d000)
+#define MX2x_CSPI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0e000)
+#define MX2x_CSPI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0f000)
+#define MX2x_SSI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x10000)
+#define MX2x_SSI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x11000)
+#define MX2x_I2C_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x12000)
+#define MX2x_SDHC1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x13000)
+#define MX2x_SDHC2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x14000)
+#define MX2x_GPIO_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x15000)
+#define MX2x_AUDMUX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x16000)
+#define MX2x_CSPI3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x17000)
+#define MX2x_LCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x21000)
+#define MX2x_SLCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x22000)
+#define MX2x_USBOTG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x24000)
+#define MX2x_EMMA_PP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26000)
+#define MX2x_EMMA_PRP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26400)
+#define MX2x_CCM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27000)
+#define MX2x_SYSCTRL_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27800)
+#define MX2x_JAM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3e000)
+#define MX2x_MAX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX2x_AVIC_BASE_ADDR		0x10040000
+
+#define MX2x_SAHB1_BASE_ADDR		0x80000000
+#define MX2x_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX2x_SAHB1_SIZE			SZ_1M
+#define MX2x_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
 
 /*
  * This macro defines the physical to virtual address mapping for all the
@@ -105,78 +103,189 @@
 	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
 /* fixed interrupt numbers */
-#define MXC_INT_LCDC		61
-#define MXC_INT_SLCDC		60
-#define MXC_INT_EMMAPP		52
-#define MXC_INT_EMMAPRP		51
-#define MXC_INT_DMACH15		47
-#define MXC_INT_DMACH14		46
-#define MXC_INT_DMACH13		45
-#define MXC_INT_DMACH12		44
-#define MXC_INT_DMACH11		43
-#define MXC_INT_DMACH10		42
-#define MXC_INT_DMACH9		41
-#define MXC_INT_DMACH8		40
-#define MXC_INT_DMACH7		39
-#define MXC_INT_DMACH6		38
-#define MXC_INT_DMACH5		37
-#define MXC_INT_DMACH4		36
-#define MXC_INT_DMACH3		35
-#define MXC_INT_DMACH2		34
-#define MXC_INT_DMACH1		33
-#define MXC_INT_DMACH0		32
-#define MXC_INT_CSI		31
-#define MXC_INT_NANDFC		29
-#define MXC_INT_PCMCIA		28
-#define MXC_INT_WDOG		27
-#define MXC_INT_GPT1		26
-#define MXC_INT_GPT2		25
-#define MXC_INT_GPT3		24
-#define MXC_INT_GPT		INT_GPT1
-#define MXC_INT_PWM		23
-#define MXC_INT_RTC		22
-#define MXC_INT_KPP		21
-#define MXC_INT_UART1		20
-#define MXC_INT_UART2		19
-#define MXC_INT_UART3		18
-#define MXC_INT_UART4		17
-#define MXC_INT_CSPI1		16
-#define MXC_INT_CSPI2		15
-#define MXC_INT_SSI1		14
-#define MXC_INT_SSI2		13
-#define MXC_INT_I2C		12
-#define MXC_INT_SDHC1		11
-#define MXC_INT_SDHC2		10
-#define MXC_INT_GPIO		8
-#define MXC_INT_CSPI3		6
+#define MX2x_INT_CSPI3		6
+#define MX2x_INT_GPIO		8
+#define MX2x_INT_SDHC2		10
+#define MX2x_INT_SDHC1		11
+#define MX2x_INT_I2C		12
+#define MX2x_INT_SSI2		13
+#define MX2x_INT_SSI1		14
+#define MX2x_INT_CSPI2		15
+#define MX2x_INT_CSPI1		16
+#define MX2x_INT_UART4		17
+#define MX2x_INT_UART3		18
+#define MX2x_INT_UART2		19
+#define MX2x_INT_UART1		20
+#define MX2x_INT_KPP		21
+#define MX2x_INT_RTC		22
+#define MX2x_INT_PWM		23
+#define MX2x_INT_GPT3		24
+#define MX2x_INT_GPT2		25
+#define MX2x_INT_GPT1		26
+#define MX2x_INT_WDOG		27
+#define MX2x_INT_PCMCIA		28
+#define MX2x_INT_NANDFC		29
+#define MX2x_INT_CSI		31
+#define MX2x_INT_DMACH0		32
+#define MX2x_INT_DMACH1		33
+#define MX2x_INT_DMACH2		34
+#define MX2x_INT_DMACH3		35
+#define MX2x_INT_DMACH4		36
+#define MX2x_INT_DMACH5		37
+#define MX2x_INT_DMACH6		38
+#define MX2x_INT_DMACH7		39
+#define MX2x_INT_DMACH8		40
+#define MX2x_INT_DMACH9		41
+#define MX2x_INT_DMACH10	42
+#define MX2x_INT_DMACH11	43
+#define MX2x_INT_DMACH12	44
+#define MX2x_INT_DMACH13	45
+#define MX2x_INT_DMACH14	46
+#define MX2x_INT_DMACH15	47
+#define MX2x_INT_EMMAPRP	51
+#define MX2x_INT_EMMAPP		52
+#define MX2x_INT_SLCDC		60
+#define MX2x_INT_LCDC		61
 
 /* fixed DMA request numbers */
-#define DMA_REQ_CSI_RX          31
-#define DMA_REQ_CSI_STAT        30
-#define DMA_REQ_UART1_TX        27
-#define DMA_REQ_UART1_RX        26
-#define DMA_REQ_UART2_TX        25
-#define DMA_REQ_UART2_RX        24
-#define DMA_REQ_UART3_TX        23
-#define DMA_REQ_UART3_RX        22
-#define DMA_REQ_UART4_TX        21
-#define DMA_REQ_UART4_RX        20
-#define DMA_REQ_CSPI1_TX        19
-#define DMA_REQ_CSPI1_RX        18
-#define DMA_REQ_CSPI2_TX        17
-#define DMA_REQ_CSPI2_RX        16
-#define DMA_REQ_SSI1_TX1        15
-#define DMA_REQ_SSI1_RX1        14
-#define DMA_REQ_SSI1_TX0        13
-#define DMA_REQ_SSI1_RX0        12
-#define DMA_REQ_SSI2_TX1        11
-#define DMA_REQ_SSI2_RX1        10
-#define DMA_REQ_SSI2_TX0        9
-#define DMA_REQ_SSI2_RX0        8
-#define DMA_REQ_SDHC1           7
-#define DMA_REQ_SDHC2           6
-#define DMA_REQ_EXT             3
-#define DMA_REQ_CSPI3_TX        2
-#define DMA_REQ_CSPI3_RX        1
+#define MX2x_DMA_REQ_CSPI3_RX	1
+#define MX2x_DMA_REQ_CSPI3_TX	2
+#define MX2x_DMA_REQ_EXT	3
+#define MX2x_DMA_REQ_SDHC2	6
+#define MX2x_DMA_REQ_SDHC1	7
+#define MX2x_DMA_REQ_SSI2_RX0	8
+#define MX2x_DMA_REQ_SSI2_TX0	9
+#define MX2x_DMA_REQ_SSI2_RX1	10
+#define MX2x_DMA_REQ_SSI2_TX1	11
+#define MX2x_DMA_REQ_SSI1_RX0	12
+#define MX2x_DMA_REQ_SSI1_TX0	13
+#define MX2x_DMA_REQ_SSI1_RX1	14
+#define MX2x_DMA_REQ_SSI1_TX1	15
+#define MX2x_DMA_REQ_CSPI2_RX	16
+#define MX2x_DMA_REQ_CSPI2_TX	17
+#define MX2x_DMA_REQ_CSPI1_RX	18
+#define MX2x_DMA_REQ_CSPI1_TX	19
+#define MX2x_DMA_REQ_UART4_RX	20
+#define MX2x_DMA_REQ_UART4_TX	21
+#define MX2x_DMA_REQ_UART3_RX	22
+#define MX2x_DMA_REQ_UART3_TX	23
+#define MX2x_DMA_REQ_UART2_RX	24
+#define MX2x_DMA_REQ_UART2_TX	25
+#define MX2x_DMA_REQ_UART1_RX	26
+#define MX2x_DMA_REQ_UART1_TX	27
+#define MX2x_DMA_REQ_CSI_STAT	30
+#define MX2x_DMA_REQ_CSI_RX	31
+
+/* these should go away */
+#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
+#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
+#define AIPI_SIZE MX2x_AIPI_SIZE
+#define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR
+#define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR
+#define GPT1_BASE_ADDR MX2x_GPT1_BASE_ADDR
+#define GPT2_BASE_ADDR MX2x_GPT2_BASE_ADDR
+#define GPT3_BASE_ADDR MX2x_GPT3_BASE_ADDR
+#define PWM_BASE_ADDR MX2x_PWM_BASE_ADDR
+#define RTC_BASE_ADDR MX2x_RTC_BASE_ADDR
+#define KPP_BASE_ADDR MX2x_KPP_BASE_ADDR
+#define OWIRE_BASE_ADDR MX2x_OWIRE_BASE_ADDR
+#define UART1_BASE_ADDR MX2x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX2x_UART2_BASE_ADDR
+#define UART3_BASE_ADDR MX2x_UART3_BASE_ADDR
+#define UART4_BASE_ADDR MX2x_UART4_BASE_ADDR
+#define CSPI1_BASE_ADDR MX2x_CSPI1_BASE_ADDR
+#define CSPI2_BASE_ADDR MX2x_CSPI2_BASE_ADDR
+#define SSI1_BASE_ADDR MX2x_SSI1_BASE_ADDR
+#define SSI2_BASE_ADDR MX2x_SSI2_BASE_ADDR
+#define I2C_BASE_ADDR MX2x_I2C_BASE_ADDR
+#define SDHC1_BASE_ADDR MX2x_SDHC1_BASE_ADDR
+#define SDHC2_BASE_ADDR MX2x_SDHC2_BASE_ADDR
+#define GPIO_BASE_ADDR MX2x_GPIO_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX2x_AUDMUX_BASE_ADDR
+#define CSPI3_BASE_ADDR MX2x_CSPI3_BASE_ADDR
+#define LCDC_BASE_ADDR MX2x_LCDC_BASE_ADDR
+#define SLCDC_BASE_ADDR MX2x_SLCDC_BASE_ADDR
+#define USBOTG_BASE_ADDR MX2x_USBOTG_BASE_ADDR
+#define EMMA_PP_BASE_ADDR MX2x_EMMA_PP_BASE_ADDR
+#define EMMA_PRP_BASE_ADDR MX2x_EMMA_PRP_BASE_ADDR
+#define CCM_BASE_ADDR MX2x_CCM_BASE_ADDR
+#define SYSCTRL_BASE_ADDR MX2x_SYSCTRL_BASE_ADDR
+#define JAM_BASE_ADDR MX2x_JAM_BASE_ADDR
+#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR
+#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR
+#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR
+#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT
+#define SAHB1_SIZE MX2x_SAHB1_SIZE
+#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR
+#define MXC_INT_CSPI3 MX2x_INT_CSPI3
+#define MXC_INT_GPIO MX2x_INT_GPIO
+#define MXC_INT_SDHC2 MX2x_INT_SDHC2
+#define MXC_INT_SDHC1 MX2x_INT_SDHC1
+#define MXC_INT_I2C MX2x_INT_I2C
+#define MXC_INT_SSI2 MX2x_INT_SSI2
+#define MXC_INT_SSI1 MX2x_INT_SSI1
+#define MXC_INT_CSPI2 MX2x_INT_CSPI2
+#define MXC_INT_CSPI1 MX2x_INT_CSPI1
+#define MXC_INT_UART4 MX2x_INT_UART4
+#define MXC_INT_UART3 MX2x_INT_UART3
+#define MXC_INT_UART2 MX2x_INT_UART2
+#define MXC_INT_UART1 MX2x_INT_UART1
+#define MXC_INT_KPP MX2x_INT_KPP
+#define MXC_INT_RTC MX2x_INT_RTC
+#define MXC_INT_PWM MX2x_INT_PWM
+#define MXC_INT_GPT3 MX2x_INT_GPT3
+#define MXC_INT_GPT2 MX2x_INT_GPT2
+#define MXC_INT_GPT1 MX2x_INT_GPT1
+#define MXC_INT_WDOG MX2x_INT_WDOG
+#define MXC_INT_PCMCIA MX2x_INT_PCMCIA
+#define MXC_INT_NANDFC MX2x_INT_NANDFC
+#define MXC_INT_CSI MX2x_INT_CSI
+#define MXC_INT_DMACH0 MX2x_INT_DMACH0
+#define MXC_INT_DMACH1 MX2x_INT_DMACH1
+#define MXC_INT_DMACH2 MX2x_INT_DMACH2
+#define MXC_INT_DMACH3 MX2x_INT_DMACH3
+#define MXC_INT_DMACH4 MX2x_INT_DMACH4
+#define MXC_INT_DMACH5 MX2x_INT_DMACH5
+#define MXC_INT_DMACH6 MX2x_INT_DMACH6
+#define MXC_INT_DMACH7 MX2x_INT_DMACH7
+#define MXC_INT_DMACH8 MX2x_INT_DMACH8
+#define MXC_INT_DMACH9 MX2x_INT_DMACH9
+#define MXC_INT_DMACH10 MX2x_INT_DMACH10
+#define MXC_INT_DMACH11 MX2x_INT_DMACH11
+#define MXC_INT_DMACH12 MX2x_INT_DMACH12
+#define MXC_INT_DMACH13 MX2x_INT_DMACH13
+#define MXC_INT_DMACH14 MX2x_INT_DMACH14
+#define MXC_INT_DMACH15 MX2x_INT_DMACH15
+#define MXC_INT_EMMAPRP MX2x_INT_EMMAPRP
+#define MXC_INT_EMMAPP MX2x_INT_EMMAPP
+#define MXC_INT_SLCDC MX2x_INT_SLCDC
+#define MXC_INT_LCDC MX2x_INT_LCDC
+#define DMA_REQ_CSPI3_RX MX2x_DMA_REQ_CSPI3_RX
+#define DMA_REQ_CSPI3_TX MX2x_DMA_REQ_CSPI3_TX
+#define DMA_REQ_EXT MX2x_DMA_REQ_EXT
+#define DMA_REQ_SDHC2 MX2x_DMA_REQ_SDHC2
+#define DMA_REQ_SDHC1 MX2x_DMA_REQ_SDHC1
+#define DMA_REQ_SSI2_RX0 MX2x_DMA_REQ_SSI2_RX0
+#define DMA_REQ_SSI2_TX0 MX2x_DMA_REQ_SSI2_TX0
+#define DMA_REQ_SSI2_RX1 MX2x_DMA_REQ_SSI2_RX1
+#define DMA_REQ_SSI2_TX1 MX2x_DMA_REQ_SSI2_TX1
+#define DMA_REQ_SSI1_RX0 MX2x_DMA_REQ_SSI1_RX0
+#define DMA_REQ_SSI1_TX0 MX2x_DMA_REQ_SSI1_TX0
+#define DMA_REQ_SSI1_RX1 MX2x_DMA_REQ_SSI1_RX1
+#define DMA_REQ_SSI1_TX1 MX2x_DMA_REQ_SSI1_TX1
+#define DMA_REQ_CSPI2_RX MX2x_DMA_REQ_CSPI2_RX
+#define DMA_REQ_CSPI2_TX MX2x_DMA_REQ_CSPI2_TX
+#define DMA_REQ_CSPI1_RX MX2x_DMA_REQ_CSPI1_RX
+#define DMA_REQ_CSPI1_TX MX2x_DMA_REQ_CSPI1_TX
+#define DMA_REQ_UART4_RX MX2x_DMA_REQ_UART4_RX
+#define DMA_REQ_UART4_TX MX2x_DMA_REQ_UART4_TX
+#define DMA_REQ_UART3_RX MX2x_DMA_REQ_UART3_RX
+#define DMA_REQ_UART3_TX MX2x_DMA_REQ_UART3_TX
+#define DMA_REQ_UART2_RX MX2x_DMA_REQ_UART2_RX
+#define DMA_REQ_UART2_TX MX2x_DMA_REQ_UART2_TX
+#define DMA_REQ_UART1_RX MX2x_DMA_REQ_UART1_RX
+#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
+#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
 
 #endif /* __ASM_ARCH_MXC_MX2x_H__ */

arch/arm/plat-mxc/include/mach/mx31.h

@@ -1,45 +1,218 @@
 /*
  * IRAM
  */
-#define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
+#define MX31_IRAM_BASE_ADDR		0x1ffc0000	/* internal ram */
 #define MX31_IRAM_SIZE			SZ_16K
 
-#define MX31_OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00088000)
-#define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
-#define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
-#define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
+#define MX31_L2CC_BASE_ADDR		0x30000000
+#define MX31_L2CC_SIZE			SZ_1M
 
-#define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
-#define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
-#define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
-#define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
+#define MX31_AIPS1_BASE_ADDR		0x43f00000
+#define MX31_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX31_AIPS1_SIZE			SZ_1M
+#define MX31_MAX_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x04000)
+#define MX31_EVTMON_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x08000)
+#define MX31_CLKCTL_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x0c000)
+#define MX31_ETB_SLOT4_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x10000)
+#define MX31_ETB_SLOT5_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x14000)
+#define MX31_ECT_CTIO_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x18000)
+#define MX31_I2C_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C3_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x84000)
+#define MX31_OTG_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_ATA_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x8c000)
+#define MX31_UART1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x90000)
+#define MX31_UART2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x94000)
+#define MX31_I2C2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x98000)
+#define MX31_OWIRE_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x9c000)
+#define MX31_SSI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa0000)
+#define MX31_CSPI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa4000)
+#define MX31_KPP_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa8000)
+#define MX31_IOMUXC_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xac000)
+#define MX31_UART4_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb0000)
+#define MX31_UART5_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb4000)
+#define MX31_ECT_IP1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb8000)
+#define MX31_ECT_IP2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xbc000)
 
-#define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
-#define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
-#define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
-#define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
-#define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
+#define MX31_SPBA0_BASE_ADDR		0x50000000
+#define MX31_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX31_SPBA0_SIZE			SZ_1M
+#define MX31_MMC_SDHC1_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x04000)
+#define MX31_MMC_SDHC2_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x08000)
+#define MX31_UART3_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x0c000)
+#define MX31_CSPI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x10000)
+#define MX31_SSI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x14000)
+#define MX31_SIM1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x18000)
+#define MX31_IIM_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x1c000)
+#define MX31_ATA_DMA_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x20000)
+#define MX31_MSHC1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x24000)
+#define MX31_SPBA_CTRL_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x3c000)
 
-#define MX31_NFC_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_AIPS2_BASE_ADDR		0x53f00000
+#define MX31_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX31_AIPS2_SIZE			SZ_1M
+#define MX31_CCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x80000)
+#define MX31_CSPI3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x84000)
+#define MX31_FIRI_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x8c000)
+#define MX31_GPT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x90000)
+#define MX31_EPIT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x94000)
+#define MX31_EPIT2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x98000)
+#define MX31_GPIO3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xa4000)
+#define MX31_SCC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xac000)
+#define MX31_SCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xae000)
+#define MX31_SMN_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xaf000)
+#define MX31_RNGA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xb0000)
+#define MX31_IPU_CTRL_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc0000)
+#define MX31_AUDMUX_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc4000)
+#define MX31_MPEG4_ENC_BASE_ADDR		(MX31_AIPS2_BASE_ADDR + 0xc8000)
+#define MX31_GPIO1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xcc000)
+#define MX31_GPIO2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd0000)
+#define MX31_SDMA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd4000)
+#define MX31_RTC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd8000)
+#define MX31_WDOG_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xdc000)
+#define MX31_PWM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xe0000)
+#define MX31_RTIC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xec000)
 
-#define MXC_INT_MPEG4_ENCODER	5
-#define MXC_INT_FIRI		7
+#define MX31_ROMP_BASE_ADDR		0x60000000
+#define MX31_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX31_ROMP_SIZE			SZ_1M
+
+#define MX31_AVIC_BASE_ADDR		0x68000000
+#define MX31_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX31_AVIC_SIZE			SZ_1M
+
+#define MX31_IPU_MEM_BASE_ADDR		0x70000000
+#define MX31_CSD0_BASE_ADDR		0x80000000
+#define MX31_CSD1_BASE_ADDR		0x90000000
+
+#define MX31_CS0_BASE_ADDR		0xa0000000
+#define MX31_CS1_BASE_ADDR		0xa8000000
+#define MX31_CS2_BASE_ADDR		0xb0000000
+#define MX31_CS3_BASE_ADDR		0xb2000000
+
+#define MX31_CS4_BASE_ADDR		0xb4000000
+#define MX31_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX31_CS4_SIZE			SZ_32M
+
+#define MX31_CS5_BASE_ADDR		0xb6000000
+#define MX31_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX31_CS5_SIZE			SZ_32M
+
+#define MX31_X_MEMC_BASE_ADDR		0xb8000000
+#define MX31_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX31_X_MEMC_SIZE		SZ_64K
+#define MX31_NFC_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_ESDCTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x1000)
+#define MX31_WEIM_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x2000)
+#define MX31_M3IF_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x3000)
+#define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
+#define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
+
+#define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
+
+#define MX31_INT_I2C3		3
+#define MX31_INT_I2C2		4
+#define MX31_INT_MPEG4_ENCODER	5
+#define MX31_INT_RTIC		6
+#define MX31_INT_FIRI		7
 #define MX31_INT_MMC_SDHC2	8
-#define MXC_INT_MMC_SDHC1	9
+#define MX31_INT_MMC_SDHC1	9
+#define MX31_INT_I2C		10
 #define MX31_INT_SSI2		11
 #define MX31_INT_SSI1		12
-#define MXC_INT_MBX		16
-#define MXC_INT_CSPI3		17
-#define MXC_INT_SIM2		20
-#define MXC_INT_SIM1		21
-#define MXC_INT_CCM_DVFS	31
-#define MXC_INT_USB1		35
-#define MXC_INT_USB2		36
-#define MXC_INT_USB3		37
-#define MXC_INT_USB4		38
-#define MXC_INT_MSHC2		40
-#define MXC_INT_UART4		46
-#define MXC_INT_UART5		47
-#define MXC_INT_CCM		53
-#define MXC_INT_PCMCIA		54
+#define MX31_INT_CSPI2		13
+#define MX31_INT_CSPI1		14
+#define MX31_INT_ATA		15
+#define MX31_INT_MBX		16
+#define MX31_INT_CSPI3		17
+#define MX31_INT_UART3		18
+#define MX31_INT_IIM		19
+#define MX31_INT_SIM2		20
+#define MX31_INT_SIM1		21
+#define MX31_INT_RNGA		22
+#define MX31_INT_EVTMON		23
+#define MX31_INT_KPP		24
+#define MX31_INT_RTC		25
+#define MX31_INT_PWM		26
+#define MX31_INT_EPIT2		27
+#define MX31_INT_EPIT1		28
+#define MX31_INT_GPT		29
+#define MX31_INT_POWER_FAIL	30
+#define MX31_INT_CCM_DVFS	31
+#define MX31_INT_UART2		32
+#define MX31_INT_NANDFC		33
+#define MX31_INT_SDMA		34
+#define MX31_INT_USB1		35
+#define MX31_INT_USB2		36
+#define MX31_INT_USB3		37
+#define MX31_INT_USB4		38
+#define MX31_INT_MSHC1		39
+#define MX31_INT_MSHC2		40
+#define MX31_INT_IPU_ERR	41
+#define MX31_INT_IPU_SYN	42
+#define MX31_INT_UART1		45
+#define MX31_INT_UART4		46
+#define MX31_INT_UART5		47
+#define MX31_INT_ECT		48
+#define MX31_INT_SCC_SCM	49
+#define MX31_INT_SCC_SMN	50
+#define MX31_INT_GPIO2		51
+#define MX31_INT_GPIO1		52
+#define MX31_INT_CCM		53
+#define MX31_INT_PCMCIA		54
+#define MX31_INT_WDOG		55
+#define MX31_INT_GPIO3		56
+#define MX31_INT_EXT_POWER	58
+#define MX31_INT_EXT_TEMPER	59
+#define MX31_INT_EXT_SENSOR60	60
+#define MX31_INT_EXT_SENSOR61	61
+#define MX31_INT_EXT_WDOG	62
+#define MX31_INT_EXT_TV		63
+
+#define MX31_PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX31_CHIP_REV_1_0		0x10
+#define MX31_CHIP_REV_1_1		0x11
+#define MX31_CHIP_REV_1_2		0x12
+#define MX31_CHIP_REV_1_3		0x13
+#define MX31_CHIP_REV_2_0		0x20
+#define MX31_CHIP_REV_2_1		0x21
+#define MX31_CHIP_REV_2_2		0x22
+#define MX31_CHIP_REV_2_3		0x23
+#define MX31_CHIP_REV_3_0		0x30
+#define MX31_CHIP_REV_3_1		0x31
+#define MX31_CHIP_REV_3_2		0x32
+
+#define MX31_SYSTEM_REV_MIN		MX31_CHIP_REV_1_0
+#define MX31_SYSTEM_REV_NUM		3
 
+/* these should go away */
+#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
+#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
+#define UART5_BASE_ADDR MX31_UART5_BASE_ADDR
+#define MMC_SDHC1_BASE_ADDR MX31_MMC_SDHC1_BASE_ADDR
+#define MMC_SDHC2_BASE_ADDR MX31_MMC_SDHC2_BASE_ADDR
+#define SIM1_BASE_ADDR MX31_SIM1_BASE_ADDR
+#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
+#define CSPI3_BASE_ADDR MX31_CSPI3_BASE_ADDR
+#define FIRI_BASE_ADDR MX31_FIRI_BASE_ADDR
+#define SCM_BASE_ADDR MX31_SCM_BASE_ADDR
+#define SMN_BASE_ADDR MX31_SMN_BASE_ADDR
+#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
+#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
+#define MXC_INT_FIRI MX31_INT_FIRI
+#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1
+#define MXC_INT_MBX MX31_INT_MBX
+#define MXC_INT_CSPI3 MX31_INT_CSPI3
+#define MXC_INT_SIM2 MX31_INT_SIM2
+#define MXC_INT_SIM1 MX31_INT_SIM1
+#define MXC_INT_CCM_DVFS MX31_INT_CCM_DVFS
+#define MXC_INT_USB1 MX31_INT_USB1
+#define MXC_INT_USB2 MX31_INT_USB2
+#define MXC_INT_USB3 MX31_INT_USB3
+#define MXC_INT_USB4 MX31_INT_USB4
+#define MXC_INT_MSHC2 MX31_INT_MSHC2
+#define MXC_INT_UART4 MX31_INT_UART4
+#define MXC_INT_UART5 MX31_INT_UART5
+#define MXC_INT_CCM MX31_INT_CCM
+#define MXC_INT_PCMCIA MX31_INT_PCMCIA

arch/arm/plat-mxc/include/mach/mx35.h

@@ -2,29 +2,196 @@
  * IRAM
  */
 #define MX35_IRAM_BASE_ADDR		0x10000000	/* internal ram */
-#define MX35_IRAM_SIZE		SZ_128K
+#define MX35_IRAM_SIZE			SZ_128K
 
-#define MXC_FEC_BASE_ADDR	0x50038000
-#define MX35_OTG_BASE_ADDR	0x53ff4000
-#define MX35_NFC_BASE_ADDR	0xBB000000
+#define MX35_L2CC_BASE_ADDR		0x30000000
+#define MX35_L2CC_SIZE			SZ_1M
+
+#define MX35_AIPS1_BASE_ADDR		0x43f00000
+#define MX35_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX35_AIPS1_SIZE			SZ_1M
+#define MX35_MAX_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x04000)
+#define MX35_EVTMON_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x08000)
+#define MX35_CLKCTL_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x0c000)
+#define MX35_ETB_SLOT4_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x10000)
+#define MX35_ETB_SLOT5_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x14000)
+#define MX35_ECT_CTIO_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x18000)
+#define MX35_I2C_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C3_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x84000)
+#define MX35_UART1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x90000)
+#define MX35_UART2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x94000)
+#define MX35_I2C2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x98000)
+#define MX35_OWIRE_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x9c000)
+#define MX35_SSI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa0000)
+#define MX35_CSPI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa4000)
+#define MX35_KPP_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa8000)
+#define MX35_IOMUXC_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xac000)
+#define MX35_ECT_IP1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xb8000)
+#define MX35_ECT_IP2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xbc000)
+
+#define MX35_SPBA0_BASE_ADDR		0x50000000
+#define MX35_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX35_SPBA0_SIZE			SZ_1M
+#define MX35_UART3_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x0c000)
+#define MX35_CSPI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x10000)
+#define MX35_SSI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x14000)
+#define MX35_ATA_DMA_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x20000)
+#define MX35_MSHC1_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x24000)
+#define MX35_FEC_BASE_ADDR		0x50038000
+#define MX35_SPBA_CTRL_BASE_ADDR		(MX35_SPBA0_BASE_ADDR + 0x3c000)
+
+#define MX35_AIPS2_BASE_ADDR		0x53f00000
+#define MX35_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX35_AIPS2_SIZE			SZ_1M
+#define MX35_CCM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x80000)
+#define MX35_GPT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x90000)
+#define MX35_EPIT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x94000)
+#define MX35_EPIT2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x98000)
+#define MX35_GPIO3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xa4000)
+#define MX35_SCC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xac000)
+#define MX35_RNGA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_IPU_CTRL_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc0000)
+#define MX35_AUDMUX_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc4000)
+#define MX35_GPIO1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xcc000)
+#define MX35_GPIO2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd0000)
+#define MX35_SDMA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd4000)
+#define MX35_RTC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd8000)
+#define MX35_WDOG_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xdc000)
+#define MX35_PWM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_OTG_BASE_ADDR		0x53ff4000
+
+#define MX35_ROMP_BASE_ADDR		0x60000000
+#define MX35_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX35_ROMP_SIZE			SZ_1M
+
+#define MX35_AVIC_BASE_ADDR		0x68000000
+#define MX35_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX35_AVIC_SIZE			SZ_1M
+
+/*
+ * Memory regions and CS
+ */
+#define MX35_IPU_MEM_BASE_ADDR		0x70000000
+#define MX35_CSD0_BASE_ADDR		0x80000000
+#define MX35_CSD1_BASE_ADDR		0x90000000
+
+#define MX35_CS0_BASE_ADDR		0xa0000000
+#define MX35_CS1_BASE_ADDR		0xa8000000
+#define MX35_CS2_BASE_ADDR		0xb0000000
+#define MX35_CS3_BASE_ADDR		0xb2000000
+
+#define MX35_CS4_BASE_ADDR		0xb4000000
+#define MX35_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX35_CS4_SIZE			SZ_32M
+
+#define MX35_CS5_BASE_ADDR		0xb6000000
+#define MX35_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX35_CS5_SIZE			SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX35_X_MEMC_BASE_ADDR		0xb8000000
+#define MX35_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX35_X_MEMC_SIZE		SZ_64K
+#define MX35_ESDCTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x1000)
+#define MX35_WEIM_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x2000)
+#define MX35_M3IF_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x3000)
+#define MX35_EMI_CTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x4000)
+#define MX35_PCMCIA_CTL_BASE_ADDR		MX35_EMI_CTL_BASE_ADDR
+
+#define MX35_NFC_BASE_ADDR		0xbb000000
+#define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
 /*
  * Interrupt numbers
  */
-#define MXC_INT_OWIRE		2
+#define MX35_INT_OWIRE		2
+#define MX35_INT_I2C3		3
+#define MX35_INT_I2C2		4
+#define MX35_INT_RTIC		6
 #define MX35_INT_MMC_SDHC1	7
-#define MXC_INT_MMC_SDHC2	8
-#define MXC_INT_MMC_SDHC3	9
+#define MX35_INT_MMC_SDHC2	8
+#define MX35_INT_MMC_SDHC3	9
+#define MX35_INT_I2C		10
 #define MX35_INT_SSI1		11
 #define MX35_INT_SSI2		12
-#define MXC_INT_GPU2D		16
-#define MXC_INT_ASRC		17
-#define MXC_INT_USBHS		35
-#define MXC_INT_USBOTG		37
-#define MXC_INT_ESAI		40
-#define MXC_INT_CAN1		43
-#define MXC_INT_CAN2		44
-#define MXC_INT_MLB		46
-#define MXC_INT_SPDIF		47
-#define MXC_INT_FEC		57
+#define MX35_INT_CSPI2		13
+#define MX35_INT_CSPI1		14
+#define MX35_INT_ATA		15
+#define MX35_INT_GPU2D		16
+#define MX35_INT_ASRC		17
+#define MX35_INT_UART3		18
+#define MX35_INT_IIM		19
+#define MX35_INT_RNGA		22
+#define MX35_INT_EVTMON		23
+#define MX35_INT_KPP		24
+#define MX35_INT_RTC		25
+#define MX35_INT_PWM		26
+#define MX35_INT_EPIT2		27
+#define MX35_INT_EPIT1		28
+#define MX35_INT_GPT		29
+#define MX35_INT_POWER_FAIL	30
+#define MX35_INT_UART2		32
+#define MX35_INT_NANDFC		33
+#define MX35_INT_SDMA		34
+#define MX35_INT_USBHS		35
+#define MX35_INT_USBOTG		37
+#define MX35_INT_MSHC1		39
+#define MX35_INT_ESAI		40
+#define MX35_INT_IPU_ERR	41
+#define MX35_INT_IPU_SYN	42
+#define MX35_INT_CAN1		43
+#define MX35_INT_CAN2		44
+#define MX35_INT_UART1		45
+#define MX35_INT_MLB		46
+#define MX35_INT_SPDIF		47
+#define MX35_INT_ECT		48
+#define MX35_INT_SCC_SCM	49
+#define MX35_INT_SCC_SMN	50
+#define MX35_INT_GPIO2		51
+#define MX35_INT_GPIO1		52
+#define MX35_INT_WDOG		55
+#define MX35_INT_GPIO3		56
+#define MX35_INT_FEC		57
+#define MX35_INT_EXT_POWER	58
+#define MX35_INT_EXT_TEMPER	59
+#define MX35_INT_EXT_SENSOR60	60
+#define MX35_INT_EXT_SENSOR61	61
+#define MX35_INT_EXT_WDOG	62
+#define MX35_INT_EXT_TV		63
+
+#define MX35_PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX35_CHIP_REV_1_0		0x10
+#define MX35_CHIP_REV_1_1		0x11
+#define MX35_CHIP_REV_1_2		0x12
+#define MX35_CHIP_REV_1_3		0x13
+#define MX35_CHIP_REV_2_0		0x20
+#define MX35_CHIP_REV_2_1		0x21
+#define MX35_CHIP_REV_2_2		0x22
+#define MX35_CHIP_REV_2_3		0x23
+#define MX35_CHIP_REV_3_0		0x30
+#define MX35_CHIP_REV_3_1		0x31
+#define MX35_CHIP_REV_3_2		0x32
+
+#define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
+#define MX35_SYSTEM_REV_NUM		3
 
+/* these should go away */
+#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
+#define MXC_INT_OWIRE MX35_INT_OWIRE
+#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2
+#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3
+#define MXC_INT_GPU2D MX35_INT_GPU2D
+#define MXC_INT_ASRC MX35_INT_ASRC
+#define MXC_INT_USBHS MX35_INT_USBHS
+#define MXC_INT_USBOTG MX35_INT_USBOTG
+#define MXC_INT_ESAI MX35_INT_ESAI
+#define MXC_INT_CAN1 MX35_INT_CAN1
+#define MXC_INT_CAN2 MX35_INT_CAN2
+#define MXC_INT_MLB MX35_INT_MLB
+#define MXC_INT_SPDIF MX35_INT_SPDIF
+#define MXC_INT_FEC MX35_INT_FEC

arch/arm/plat-mxc/include/mach/mx3x.h

@@ -34,120 +34,117 @@
  *         	C0000000	64M	PCMCIA/CF
  */
 
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define CS5_BASE_ADDR_VIRT	0xF6000000
-#define CS5_SIZE		SZ_32M
-
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
 /*
  * L2CC
  */
-#define L2CC_BASE_ADDR		0x30000000
-#define L2CC_SIZE		SZ_1M
+#define MX3x_L2CC_BASE_ADDR		0x30000000
+#define MX3x_L2CC_SIZE			SZ_1M
 
 /*
  * AIPS 1
  */
-#define AIPS1_BASE_ADDR		0x43F00000
-#define AIPS1_BASE_ADDR_VIRT	0xFC000000
-#define AIPS1_SIZE		SZ_1M
-
-#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
-#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
-#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+#define MX3x_AIPS1_BASE_ADDR		0x43f00000
+#define MX3x_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX3x_AIPS1_SIZE			SZ_1M
+#define MX3x_MAX_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x04000)
+#define MX3x_EVTMON_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x08000)
+#define MX3x_CLKCTL_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x0c000)
+#define MX3x_ETB_SLOT4_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x10000)
+#define MX3x_ETB_SLOT5_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x14000)
+#define MX3x_ECT_CTIO_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x18000)
+#define MX3x_I2C_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x80000)
+#define MX3x_I2C3_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x84000)
+#define MX3x_UART1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x90000)
+#define MX3x_UART2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x94000)
+#define MX3x_I2C2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x98000)
+#define MX3x_OWIRE_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x9c000)
+#define MX3x_SSI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa0000)
+#define MX3x_CSPI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa4000)
+#define MX3x_KPP_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa8000)
+#define MX3x_IOMUXC_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xac000)
+#define MX3x_ECT_IP1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xb8000)
+#define MX3x_ECT_IP2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xbc000)
 
 /*
  * SPBA global module enabled #0
  */
-#define SPBA0_BASE_ADDR 	0x50000000
-#define SPBA0_BASE_ADDR_VIRT	0xFC100000
-#define SPBA0_SIZE		SZ_1M
-
-#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
-#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+#define MX3x_SPBA0_BASE_ADDR		0x50000000
+#define MX3x_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX3x_SPBA0_SIZE			SZ_1M
+#define MX3x_UART3_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x0c000)
+#define MX3x_CSPI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x10000)
+#define MX3x_SSI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x14000)
+#define MX3x_ATA_DMA_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x20000)
+#define MX3x_MSHC1_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x24000)
+#define MX3x_SPBA_CTRL_BASE_ADDR		(MX3x_SPBA0_BASE_ADDR + 0x3c000)
 
 /*
  * AIPS 2
  */
-#define AIPS2_BASE_ADDR		0x53F00000
-#define AIPS2_BASE_ADDR_VIRT	0xFC200000
-#define AIPS2_SIZE		SZ_1M
-#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
-#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
-#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
-#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+#define MX3x_AIPS2_BASE_ADDR		0x53f00000
+#define MX3x_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX3x_AIPS2_SIZE			SZ_1M
+#define MX3x_CCM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x80000)
+#define MX3x_GPT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x90000)
+#define MX3x_EPIT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x94000)
+#define MX3x_EPIT2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x98000)
+#define MX3x_GPIO3_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xa4000)
+#define MX3x_SCC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xac000)
+#define MX3x_RNGA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xb0000)
+#define MX3x_IPU_CTRL_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc0000)
+#define MX3x_AUDMUX_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc4000)
+#define MX3x_GPIO1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xcc000)
+#define MX3x_GPIO2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd0000)
+#define MX3x_SDMA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd4000)
+#define MX3x_RTC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd8000)
+#define MX3x_WDOG_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xdc000)
+#define MX3x_PWM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xe0000)
+#define MX3x_RTIC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xec000)
 
 /*
  * ROMP and AVIC
  */
-#define ROMP_BASE_ADDR		0x60000000
-#define ROMP_BASE_ADDR_VIRT	0xFC500000
-#define ROMP_SIZE		SZ_1M
+#define MX3x_ROMP_BASE_ADDR		0x60000000
+#define MX3x_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX3x_ROMP_SIZE			SZ_1M
 
-#define AVIC_BASE_ADDR		0x68000000
-#define AVIC_BASE_ADDR_VIRT	0xFC400000
-#define AVIC_SIZE		SZ_1M
+#define MX3x_AVIC_BASE_ADDR		0x68000000
+#define MX3x_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX3x_AVIC_SIZE			SZ_1M
 
 /*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ * Memory regions and CS
  */
-#define X_MEMC_BASE_ADDR	0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
-#define X_MEMC_SIZE		SZ_64K
+#define MX3x_IPU_MEM_BASE_ADDR		0x70000000
+#define MX3x_CSD0_BASE_ADDR		0x80000000
+#define MX3x_CSD1_BASE_ADDR		0x90000000
 
-#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+#define MX3x_CS0_BASE_ADDR		0xa0000000
+#define MX3x_CS1_BASE_ADDR		0xa8000000
+#define MX3x_CS2_BASE_ADDR		0xb0000000
+#define MX3x_CS3_BASE_ADDR		0xb2000000
+
+#define MX3x_CS4_BASE_ADDR		0xb4000000
+#define MX3x_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX3x_CS4_SIZE			SZ_32M
+
+#define MX3x_CS5_BASE_ADDR		0xb6000000
+#define MX3x_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX3x_CS5_SIZE			SZ_32M
 
 /*
- * Memory regions and CS
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
  */
-#define IPU_MEM_BASE_ADDR	0x70000000
-#define CSD0_BASE_ADDR		0x80000000
-#define CSD1_BASE_ADDR		0x90000000
+#define MX3x_X_MEMC_BASE_ADDR		0xb8000000
+#define MX3x_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX3x_X_MEMC_SIZE		SZ_64K
+#define MX3x_ESDCTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x1000)
+#define MX3x_WEIM_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x2000)
+#define MX3x_M3IF_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x3000)
+#define MX3x_EMI_CTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x4000)
+#define MX3x_PCMCIA_CTL_BASE_ADDR		MX3x_EMI_CTL_BASE_ADDR
+
+#define MX3x_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
 /*!
  * This macro defines the physical to virtual address mapping for all the
@@ -202,74 +199,207 @@
 /*
  * Interrupt numbers
  */
-#define MXC_INT_I2C3		3
-#define MXC_INT_I2C2		4
-#define MXC_INT_RTIC		6
-#define MXC_INT_I2C		10
-#define MXC_INT_CSPI2		13
-#define MXC_INT_CSPI1		14
-#define MXC_INT_ATA		15
-#define MXC_INT_UART3		18
-#define MXC_INT_IIM		19
-#define MXC_INT_RNGA		22
-#define MXC_INT_EVTMON		23
-#define MXC_INT_KPP		24
-#define MXC_INT_RTC		25
-#define MXC_INT_PWM		26
-#define MXC_INT_EPIT2		27
-#define MXC_INT_EPIT1		28
-#define MXC_INT_GPT		29
-#define MXC_INT_POWER_FAIL	30
-#define MXC_INT_UART2		32
-#define MXC_INT_NANDFC		33
-#define MXC_INT_SDMA		34
-#define MXC_INT_MSHC1		39
-#define MXC_INT_IPU_ERR		41
-#define MXC_INT_IPU_SYN		42
-#define MXC_INT_UART1		45
-#define MXC_INT_ECT		48
-#define MXC_INT_SCC_SCM		49
-#define MXC_INT_SCC_SMN		50
-#define MXC_INT_GPIO2		51
-#define MXC_INT_GPIO1		52
-#define MXC_INT_WDOG		55
-#define MXC_INT_GPIO3		56
-#define MXC_INT_EXT_POWER	58
-#define MXC_INT_EXT_TEMPER	59
-#define MXC_INT_EXT_SENSOR60	60
-#define MXC_INT_EXT_SENSOR61	61
-#define MXC_INT_EXT_WDOG	62
-#define MXC_INT_EXT_TV		63
-
-#define PROD_SIGNATURE		0x1	/* For MX31 */
+#define MX3x_INT_I2C3		3
+#define MX3x_INT_I2C2		4
+#define MX3x_INT_RTIC		6
+#define MX3x_INT_I2C		10
+#define MX3x_INT_CSPI2		13
+#define MX3x_INT_CSPI1		14
+#define MX3x_INT_ATA		15
+#define MX3x_INT_UART3		18
+#define MX3x_INT_IIM		19
+#define MX3x_INT_RNGA		22
+#define MX3x_INT_EVTMON		23
+#define MX3x_INT_KPP		24
+#define MX3x_INT_RTC		25
+#define MX3x_INT_PWM		26
+#define MX3x_INT_EPIT2		27
+#define MX3x_INT_EPIT1		28
+#define MX3x_INT_GPT		29
+#define MX3x_INT_POWER_FAIL	30
+#define MX3x_INT_UART2		32
+#define MX3x_INT_NANDFC		33
+#define MX3x_INT_SDMA		34
+#define MX3x_INT_MSHC1		39
+#define MX3x_INT_IPU_ERR	41
+#define MX3x_INT_IPU_SYN	42
+#define MX3x_INT_UART1		45
+#define MX3x_INT_ECT		48
+#define MX3x_INT_SCC_SCM	49
+#define MX3x_INT_SCC_SMN	50
+#define MX3x_INT_GPIO2		51
+#define MX3x_INT_GPIO1		52
+#define MX3x_INT_WDOG		55
+#define MX3x_INT_GPIO3		56
+#define MX3x_INT_EXT_POWER	58
+#define MX3x_INT_EXT_TEMPER	59
+#define MX3x_INT_EXT_SENSOR60	60
+#define MX3x_INT_EXT_SENSOR61	61
+#define MX3x_INT_EXT_WDOG	62
+#define MX3x_INT_EXT_TV		63
+
+#define MX3x_PROD_SIGNATURE		0x1	/* For MX31 */
 
 /* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0		0x10
-#define CHIP_REV_1_1		0x11
-#define CHIP_REV_1_2		0x12
-#define CHIP_REV_1_3		0x13
-#define CHIP_REV_2_0		0x20
-#define CHIP_REV_2_1		0x21
-#define CHIP_REV_2_2		0x22
-#define CHIP_REV_2_3		0x23
-#define CHIP_REV_3_0		0x30
-#define CHIP_REV_3_1		0x31
-#define CHIP_REV_3_2		0x32
-
-#define SYSTEM_REV_MIN		CHIP_REV_1_0
-#define SYSTEM_REV_NUM		3
+#define MX3x_CHIP_REV_1_0		0x10
+#define MX3x_CHIP_REV_1_1		0x11
+#define MX3x_CHIP_REV_1_2		0x12
+#define MX3x_CHIP_REV_1_3		0x13
+#define MX3x_CHIP_REV_2_0		0x20
+#define MX3x_CHIP_REV_2_1		0x21
+#define MX3x_CHIP_REV_2_2		0x22
+#define MX3x_CHIP_REV_2_3		0x23
+#define MX3x_CHIP_REV_3_0		0x30
+#define MX3x_CHIP_REV_3_1		0x31
+#define MX3x_CHIP_REV_3_2		0x32
+
+#define MX3x_SYSTEM_REV_MIN		MX3x_CHIP_REV_1_0
+#define MX3x_SYSTEM_REV_NUM		3
 
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
-extern unsigned int system_rev;
+extern unsigned int mx31_cpu_rev;
+extern void mx31_read_cpu_rev(void);
 
 static inline int mx31_revision(void)
 {
-	return system_rev;
+	return mx31_cpu_rev;
 }
 #endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+/* these should go away */
+#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
+#define L2CC_SIZE MX3x_L2CC_SIZE
+#define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR
+#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT
+#define AIPS1_SIZE MX3x_AIPS1_SIZE
+#define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR
+#define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR
+#define CLKCTL_BASE_ADDR MX3x_CLKCTL_BASE_ADDR
+#define ETB_SLOT4_BASE_ADDR MX3x_ETB_SLOT4_BASE_ADDR
+#define ETB_SLOT5_BASE_ADDR MX3x_ETB_SLOT5_BASE_ADDR
+#define ECT_CTIO_BASE_ADDR MX3x_ECT_CTIO_BASE_ADDR
+#define I2C_BASE_ADDR MX3x_I2C_BASE_ADDR
+#define I2C3_BASE_ADDR MX3x_I2C3_BASE_ADDR
+#define UART1_BASE_ADDR MX3x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX3x_UART2_BASE_ADDR
+#define I2C2_BASE_ADDR MX3x_I2C2_BASE_ADDR
+#define OWIRE_BASE_ADDR MX3x_OWIRE_BASE_ADDR
+#define SSI1_BASE_ADDR MX3x_SSI1_BASE_ADDR
+#define CSPI1_BASE_ADDR MX3x_CSPI1_BASE_ADDR
+#define KPP_BASE_ADDR MX3x_KPP_BASE_ADDR
+#define IOMUXC_BASE_ADDR MX3x_IOMUXC_BASE_ADDR
+#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR
+#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR
+#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR
+#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT
+#define SPBA0_SIZE MX3x_SPBA0_SIZE
+#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR
+#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR
+#define SSI2_BASE_ADDR MX3x_SSI2_BASE_ADDR
+#define ATA_DMA_BASE_ADDR MX3x_ATA_DMA_BASE_ADDR
+#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR
+#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR
+#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR
+#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT
+#define AIPS2_SIZE MX3x_AIPS2_SIZE
+#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR
+#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR
+#define EPIT1_BASE_ADDR MX3x_EPIT1_BASE_ADDR
+#define EPIT2_BASE_ADDR MX3x_EPIT2_BASE_ADDR
+#define GPIO3_BASE_ADDR MX3x_GPIO3_BASE_ADDR
+#define SCC_BASE_ADDR MX3x_SCC_BASE_ADDR
+#define RNGA_BASE_ADDR MX3x_RNGA_BASE_ADDR
+#define IPU_CTRL_BASE_ADDR MX3x_IPU_CTRL_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX3x_AUDMUX_BASE_ADDR
+#define GPIO1_BASE_ADDR MX3x_GPIO1_BASE_ADDR
+#define GPIO2_BASE_ADDR MX3x_GPIO2_BASE_ADDR
+#define SDMA_BASE_ADDR MX3x_SDMA_BASE_ADDR
+#define RTC_BASE_ADDR MX3x_RTC_BASE_ADDR
+#define WDOG_BASE_ADDR MX3x_WDOG_BASE_ADDR
+#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR
+#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR
+#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR
+#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT
+#define ROMP_SIZE MX3x_ROMP_SIZE
+#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR
+#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT
+#define AVIC_SIZE MX3x_AVIC_SIZE
+#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR
+#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR
+#define CSD1_BASE_ADDR MX3x_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX3x_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX3x_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR
+#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT
+#define CS4_SIZE MX3x_CS4_SIZE
+#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR
+#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT
+#define CS5_SIZE MX3x_CS5_SIZE
+#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX3x_X_MEMC_SIZE
+#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR
+#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX3x_M3IF_BASE_ADDR
+#define EMI_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX3x_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX3x_PCMCIA_MEM_BASE_ADDR
+#define MXC_INT_I2C3 MX3x_INT_I2C3
+#define MXC_INT_I2C2 MX3x_INT_I2C2
+#define MXC_INT_RTIC MX3x_INT_RTIC
+#define MXC_INT_I2C MX3x_INT_I2C
+#define MXC_INT_CSPI2 MX3x_INT_CSPI2
+#define MXC_INT_CSPI1 MX3x_INT_CSPI1
+#define MXC_INT_ATA MX3x_INT_ATA
+#define MXC_INT_UART3 MX3x_INT_UART3
+#define MXC_INT_IIM MX3x_INT_IIM
+#define MXC_INT_RNGA MX3x_INT_RNGA
+#define MXC_INT_EVTMON MX3x_INT_EVTMON
+#define MXC_INT_KPP MX3x_INT_KPP
+#define MXC_INT_RTC MX3x_INT_RTC
+#define MXC_INT_PWM MX3x_INT_PWM
+#define MXC_INT_EPIT2 MX3x_INT_EPIT2
+#define MXC_INT_EPIT1 MX3x_INT_EPIT1
+#define MXC_INT_GPT MX3x_INT_GPT
+#define MXC_INT_POWER_FAIL MX3x_INT_POWER_FAIL
+#define MXC_INT_UART2 MX3x_INT_UART2
+#define MXC_INT_NANDFC MX3x_INT_NANDFC
+#define MXC_INT_SDMA MX3x_INT_SDMA
+#define MXC_INT_MSHC1 MX3x_INT_MSHC1
+#define MXC_INT_IPU_ERR MX3x_INT_IPU_ERR
+#define MXC_INT_IPU_SYN MX3x_INT_IPU_SYN
+#define MXC_INT_UART1 MX3x_INT_UART1
+#define MXC_INT_ECT MX3x_INT_ECT
+#define MXC_INT_SCC_SCM MX3x_INT_SCC_SCM
+#define MXC_INT_SCC_SMN MX3x_INT_SCC_SMN
+#define MXC_INT_GPIO2 MX3x_INT_GPIO2
+#define MXC_INT_GPIO1 MX3x_INT_GPIO1
+#define MXC_INT_WDOG MX3x_INT_WDOG
+#define MXC_INT_GPIO3 MX3x_INT_GPIO3
+#define MXC_INT_EXT_POWER MX3x_INT_EXT_POWER
+#define MXC_INT_EXT_TEMPER MX3x_INT_EXT_TEMPER
+#define MXC_INT_EXT_SENSOR60 MX3x_INT_EXT_SENSOR60
+#define MXC_INT_EXT_SENSOR61 MX3x_INT_EXT_SENSOR61
+#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
+#define MXC_INT_EXT_TV MX3x_INT_EXT_TV
+#define PROD_SIGNATURE MX3x_PROD_SIGNATURE
+#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0
+#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1
+#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2
+#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3
+#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0
+#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1
+#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2
+#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3
+#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0
+#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1
+#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
+#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
+#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
 
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */

arch/arm/plat-mxc/include/mach/ulpi.h

@@ -0,0 +1,7 @@
+#ifndef __MACH_ULPI_H
+#define __MACH_ULPI_H
+
+extern struct otg_io_access_ops mxc_ulpi_access_ops;
+
+#endif /* __MACH_ULPI_H */
+

arch/arm/plat-mxc/include/mach/uncompress.h

@@ -83,6 +83,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_MX27ADS:
 	case MACH_TYPE_PCM038:
 	case MACH_TYPE_MX21ADS:
+	case MACH_TYPE_PCA100:
 		uart_base = MX2X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX31LITE:
@@ -94,6 +95,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_MX31ADS:
 	case MACH_TYPE_MX35_3DS:
 	case MACH_TYPE_PCM043:
+	case MACH_TYPE_LILLY1131:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MAGX_ZN5:

arch/arm/plat-mxc/iomux-v3.c

@@ -31,19 +31,11 @@
 
 static void __iomem *base;
 
-static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
-
 /*
- * setups a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
  */
 int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
 {
-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
-	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
-		return -EBUSY;
 	if (pad->mux_ctrl_ofs)
 		__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
 
@@ -66,37 +58,13 @@ int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
 	for (i = 0; i < count; i++) {
 		ret = mxc_iomux_v3_setup_pad(p);
 		if (ret)
-			goto setup_error;
+			return ret;
 		p++;
 	}
 	return 0;
-
-setup_error:
-	mxc_iomux_v3_release_multiple_pads(pad_list, i);
-	return ret;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
 
-void mxc_iomux_v3_release_pad(struct pad_desc *pad)
-{
-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
-	clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
-
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
-{
-	struct pad_desc *p = pad_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_v3_release_pad(p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
-
 void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
 {
 	base = iomux_v3_base;

arch/arm/plat-mxc/ulpi.c

@@ -0,0 +1,113 @@
+/*
+ * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * Copyright 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+
+#include <mach/ulpi.h>
+
+/* ULPIVIEW register bits */
+#define ULPIVW_WU		(1 << 31)	/* Wakeup */
+#define ULPIVW_RUN		(1 << 30)	/* read/write run */
+#define ULPIVW_WRITE		(1 << 29)	/* 0 = read  1 = write */
+#define ULPIVW_SS		(1 << 27)	/* SyncState */
+#define ULPIVW_PORT_MASK	0x07	/* Port field */
+#define ULPIVW_PORT_SHIFT	24
+#define ULPIVW_ADDR_MASK	0xff	/* data address field */
+#define ULPIVW_ADDR_SHIFT	16
+#define ULPIVW_RDATA_MASK	0xff	/* read data field */
+#define ULPIVW_RDATA_SHIFT	8
+#define ULPIVW_WDATA_MASK	0xff	/* write data field */
+#define ULPIVW_WDATA_SHIFT	0
+
+static int ulpi_poll(void __iomem *view, u32 bit)
+{
+	int timeout = 10000;
+
+	while (timeout--) {
+		u32 data = __raw_readl(view);
+
+		if (!(data & bit))
+			return 0;
+
+		cpu_relax();
+	};
+
+	printk(KERN_WARNING "timeout polling for ULPI device\n");
+
+	return -ETIMEDOUT;
+}
+
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	/* make sure interface is running */
+	if (!(__raw_readl(view) & ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret)
+			return ret;
+	}
+
+	/* read the register */
+	__raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
+
+	/* wait for completion */
+	ret = ulpi_poll(view, ULPIVW_RUN);
+	if (ret)
+		return ret;
+
+	return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	/* make sure the interface is running */
+	if (!(__raw_readl(view) & ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret)
+			return ret;
+	}
+
+	__raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
+		      (reg << ULPIVW_ADDR_SHIFT) |
+		      ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
+
+	/* wait for completion */
+	return ulpi_poll(view, ULPIVW_RUN);
+}
+
+struct otg_io_access_ops mxc_ulpi_access_ops = {
+	.read	= ulpi_read,
+	.write	= ulpi_write,
+};
+EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
+