Merge branch 'ux500/dt' into next/dt2

* ux500/dt:
  ARM: ux500: Provide local timer support for Device Tree
  ARM: ux500: Enable PL022 SSP Controller in Device Tree
  ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree
  ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree
  ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree
  ARM: ux500: db8500: list most devices in the snowball device tree
  ARM: ux500: split dts file for snowball into generic part
  ARM: ux500: combine the board init functions for DT boot
  ARM: ux500: Initial Device Tree support for Snowball
  ARM: ux500: CONFIG: Enable Device Tree support for future endeavours
  ARM: ux500: fix compilation after local timer rework

(adds dependency on localtimer branch, irqdomain branch and ux500/soc
branch)

Conflicts:
	arch/arm/mach-ux500/devices-common.c

This adds patches from Lee Jones, Niklas Hernaeus and myself to provide
initial device tree support on the ux500 platform. The pull request from
Lee contained some other changes, so I rebased the patches on top of
the branches that are actually dependencies for this.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/ABI/testing/sysfs-devices-soc

@@ -0,0 +1,58 @@
+What:		/sys/devices/socX
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		The /sys/devices/ directory contains a sub-directory for each
+		System-on-Chip (SoC) device on a running platform. Information
+		regarding each SoC can be obtained by reading sysfs files. This
+		functionality is only available if implemented by the platform.
+
+		The directory created for each SoC will also house information
+		about devices which are commonly contained in /sys/devices/platform.
+		It has been agreed that if an SoC device exists, its supported
+		devices would be better suited to appear as children of that SoC.
+
+What:		/sys/devices/socX/machine
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute common to all SoCs. Contains the SoC machine
+		name (e.g. Ux500).
+
+What:		/sys/devices/socX/family
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute common to all SoCs. Contains SoC family name
+		(e.g. DB8500).
+
+What:		/sys/devices/socX/soc_id
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported by most SoCs. In the case of
+		ST-Ericsson's chips this contains the SoC serial number.
+
+What:		/sys/devices/socX/revision
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported by most SoCs. Contains the SoC's
+		manufacturing revision number.
+
+What:		/sys/devices/socX/process
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Read-only attribute supported ST-Ericsson's silicon. Contains the
+		the process by which the silicon chip was manufactured.
+
+What:		/sys/bus/soc
+Date:		January 2012
+contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		The /sys/bus/soc/ directory contains the usual sub-folders
+		expected under most buses. /sys/bus/soc/devices is of particular
+		interest, as it contains a symlink for each SoC device found on
+		the system. Each symlink points back into the aforementioned
+		/sys/devices/socX devices.

Documentation/devicetree/bindings/arm/twd.txt

@@ -0,0 +1,48 @@
+* ARM Timer Watchdog
+
+ARM 11MP, Cortex-A5 and Cortex-A9 are often associated with a per-core
+Timer-Watchdog (aka TWD), which provides both a per-cpu local timer
+and watchdog.
+
+The TWD is usually attached to a GIC to deliver its two per-processor
+interrupts.
+
+** Timer node required properties:
+
+- compatible : Should be one of:
+	"arm,cortex-a9-twd-timer"
+	"arm,cortex-a5-twd-timer"
+	"arm,arm11mp-twd-timer"
+
+- interrupts : One interrupt to each core
+
+- reg : Specify the base address and the size of the TWD timer
+	register window.
+
+Example:
+
+	twd-timer@2c000600 {
+		compatible = "arm,arm11mp-twd-timer"";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0xf01>;
+	};
+
+** Watchdog node properties:
+
+- compatible : Should be one of:
+	"arm,cortex-a9-twd-wdt"
+	"arm,cortex-a5-twd-wdt"
+	"arm,arm11mp-twd-wdt"
+
+- interrupts : One interrupt to each core
+
+- reg : Specify the base address and the size of the TWD watchdog
+	register window.
+
+Example:
+
+	twd-watchdog@2c000620 {
+		compatible = "arm,arm11mp-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0xf01>;
+	};

Documentation/dynamic-debug-howto.txt

@@ -12,7 +12,7 @@ dynamically enabled per-callsite.
 Dynamic debug has even more useful features:
 
  * Simple query language allows turning on and off debugging statements by
-   matching any combination of:
+   matching any combination of 0 or 1 of:
 
    - source filename
    - function name
@@ -79,31 +79,24 @@ Command Language Reference
 ==========================
 
 At the lexical level, a command comprises a sequence of words separated
-by whitespace characters.  Note that newlines are treated as word
-separators and do *not* end a command or allow multiple commands to
-be done together.  So these are all equivalent:
+by spaces or tabs.  So these are all equivalent:
 
 nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' >
 				<debugfs>/dynamic_debug/control
 nullarbor:~ # echo -c '  file   svcsock.c     line  1603 +p  ' >
 				<debugfs>/dynamic_debug/control
-nullarbor:~ # echo -c 'file svcsock.c\nline 1603 +p' >
-				<debugfs>/dynamic_debug/control
 nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
 				<debugfs>/dynamic_debug/control
 
-Commands are bounded by a write() system call.  If you want to do
-multiple commands you need to do a separate "echo" for each, like:
+Command submissions are bounded by a write() system call.
+Multiple commands can be written together, separated by ';' or '\n'.
 
-nullarbor:~ # echo 'file svcsock.c line 1603 +p' > /proc/dprintk ;\
-> echo 'file svcsock.c line 1563 +p' > /proc/dprintk
+  ~# echo "func pnpacpi_get_resources +p; func pnp_assign_mem +p" \
+     > <debugfs>/dynamic_debug/control
 
-or even like:
+If your query set is big, you can batch them too:
 
-nullarbor:~ # (
-> echo 'file svcsock.c line 1603 +p' ;\
-> echo 'file svcsock.c line 1563 +p' ;\
-> ) > /proc/dprintk
+  ~# cat query-batch-file > <debugfs>/dynamic_debug/control
 
 At the syntactical level, a command comprises a sequence of match
 specifications, followed by a flags change specification.
@@ -144,11 +137,12 @@ func
     func svc_tcp_accept
 
 file
-    The given string is compared against either the full
-    pathname or the basename of the source file of each
-    callsite.  Examples:
+    The given string is compared against either the full pathname, the
+    src-root relative pathname, or the basename of the source file of
+    each callsite.  Examples:
 
     file svcsock.c
+    file kernel/freezer.c
     file /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c
 
 module

Documentation/filesystems/debugfs.txt

@@ -14,7 +14,10 @@ Debugfs is typically mounted with a command like:
 
     mount -t debugfs none /sys/kernel/debug
 
-(Or an equivalent /etc/fstab line). 
+(Or an equivalent /etc/fstab line).
+The debugfs root directory is accessible by anyone by default. To
+restrict access to the tree the "uid", "gid" and "mode" mount
+options can be used.
 
 Note that the debugfs API is exported GPL-only to modules.
 

arch/arm/boot/dts/db8500.dtsi

@@ -0,0 +1,275 @@
+/*
+ * Copyright 2012 Linaro Ltd
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	soc-u9500 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "stericsson,db8500";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		intc: interrupt-controller@a0411000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			interrupt-parent;
+			reg = <0xa0411000 0x1000>,
+			      <0xa0410100 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0xa0412000 0x1000>;
+			interrupts = <0 13 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 7 0x4>;
+		};
+
+		timer@a0410600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xa0410600 0x20>;
+			interrupts = <1 13 0x304>;
+		};
+
+		rtc@80154000 {
+			compatible = "stericsson,db8500-rtc";
+			reg = <0x80154000 0x1000>;
+			interrupts = <0 18 0x4>;
+		};
+
+		gpio0: gpio@8012e000 {
+			compatible = "stericsson,db8500-gpio",
+				"stmicroelectronics,nomadik-gpio";
+			reg =  <0x8012e000 0x80>;
+			interrupts = <0 119 0x4>;
+			supports-sleepmode;
+			gpio-controller;
+		};
+
+		gpio1: gpio@8012e080 {
+			compatible = "stericsson,db8500-gpio",
+				"stmicroelectronics,nomadik-gpio";
+			reg =  <0x8012e080 0x80>;
+			interrupts = <0 120 0x4>;
+			supports-sleepmode;
+			gpio-controller;
+		};
+
+		gpio2: gpio@8000e000 {
+			compatible = "stericsson,db8500-gpio",
+				"stmicroelectronics,nomadik-gpio";
+			reg =  <0x8000e000 0x80>;
+			interrupts = <0 121 0x4>;
+			supports-sleepmode;
+			gpio-controller;
+		};
+
+		gpio3: gpio@8000e080 {
+			compatible = "stericsson,db8500-gpio",
+				"stmicroelectronics,nomadik-gpio";
+			reg =  <0x8000e080 0x80>;
+			interrupts = <0 122 0x4>;
+			supports-sleepmode;
+			gpio-controller;
+		};
+
+		gpio4: gpio@8000e100 {
+			compatible = "stericsson,db8500-gpio",
+				"stmicroelectronics,nomadik-gpio";
+			reg =  <0x8000e100 0x80>;
+			interrupts = <0 123 0x4>;
+			supports-sleepmode;
+			gpio-controller;
+		};
+
+		gpio5: gpio@8000e180 {
+			compatible = "stericsson,db8500-gpio",
+				"stmicroelectronics,nomadik-gpio";
+			reg =  <0x8000e180 0x80>;
+			interrupts = <0 124 0x4>;
+			supports-sleepmode;
+			gpio-controller;
+		};
+
+		gpio6: gpio@8011e000 {
+			compatible = "stericsson,db8500-gpio",
+				"stmicroelectronics,nomadik-gpio";
+			reg =  <0x8011e000 0x80>;
+			interrupts = <0 125 0x4>;
+			supports-sleepmode;
+			gpio-controller;
+		};
+
+		gpio7: gpio@8011e080 {
+			compatible = "stericsson,db8500-gpio",
+				"stmicroelectronics,nomadik-gpio";
+			reg =  <0x8011e080 0x80>;
+			interrupts = <0 126 0x4>;
+			supports-sleepmode;
+			gpio-controller;
+		};
+
+		gpio8: gpio@a03fe000 {
+			compatible = "stericsson,db8500-gpio",
+				"stmicroelectronics,nomadik-gpio";
+			reg =  <0xa03fe000 0x80>;
+			interrupts = <0 127 0x4>;
+			supports-sleepmode;
+			gpio-controller;
+		};
+
+		usb@a03e0000 {
+			compatible = "stericsson,db8500-musb",
+				"mentor,musb";
+			reg = <0xa03e0000 0x10000>;
+			interrupts = <0 23 0x4>;
+		};
+
+		dma-controller@801C0000 {
+			compatible = "stericsson,db8500-dma40",
+					"stericsson,dma40";
+			reg = <0x801C0000 0x1000 0x40010000 0x800>;
+			interrupts = <0 25 0x4>;
+		};
+
+		prcmu@80157000 {
+			compatible = "stericsson,db8500-prcmu";
+			reg = <0x80157000 0x1000>;
+			interrupts = <46 47>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ab8500@5 {
+				compatible = "stericsson,ab8500";
+				reg = <5>; /* mailbox 5 is i2c */
+				interrupts = <0 40 0x4>;
+			};
+		};
+
+		i2c@80004000 {
+			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			reg = <0x80004000 0x1000>;
+			interrupts = <0 21 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@80122000 {
+			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			reg = <0x80122000 0x1000>;
+			interrupts = <0 22 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@80128000 {
+			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			reg = <0x80128000 0x1000>;
+			interrupts = <0 55 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@80110000 {
+			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			reg = <0x80110000 0x1000>;
+			interrupts = <0 12 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@8012a000 {
+			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			reg = <0x8012a000 0x1000>;
+			interrupts = <0 51 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ssp@80002000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <80002000 0x1000>;
+			interrupts = <0 14 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			// Add one of these for each child device
+			cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>;
+
+		};
+
+		uart@80120000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80120000 0x1000>;
+			interrupts = <0 11 0x4>;
+			status = "disabled";
+		};
+		uart@80121000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80121000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+		};
+		uart@80007000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80007000 0x1000>;
+			interrupts = <0 26 0x4>;
+			status = "disabled";
+		};
+
+		sdi@80126000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80126000 0x1000>;
+			interrupts = <0 60 0x4>;
+			status = "disabled";
+		};
+		sdi@80118000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80118000 0x1000>;
+			interrupts = <0 50 0x4>;
+			status = "disabled";
+		};
+		sdi@80005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80005000 0x1000>;
+			interrupts = <0 41 0x4>;
+			status = "disabled";
+		};
+		sdi@80119000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80119000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+		};
+		sdi@80114000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80114000 0x1000>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+		sdi@80008000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80114000 0x1000>;
+			interrupts = <0 100 0x4>;
+			status = "disabled";
+		};
+	};
+};

arch/arm/boot/dts/highbank.dts

@@ -72,15 +72,15 @@
 		ranges;
 
 		timer@fff10600 {
-			compatible = "arm,smp-twd";
+			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfff10600 0x20>;
-			interrupts = <1 13 0xf04>;
+			interrupts = <1 13 0xf01>;
 		};
 
 		watchdog@fff10620 {
-			compatible = "arm,cortex-a9-wdt";
+			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0xfff10620 0x20>;
-			interrupts = <1 14 0xf04>;
+			interrupts = <1 14 0xf01>;
 		};
 
 		intc: interrupt-controller@fff11000 {

arch/arm/boot/dts/imx6q.dtsi

@@ -88,9 +88,9 @@
 		ranges;
 
 		timer@00a00600 {
-			compatible = "arm,smp-twd";
-			reg = <0x00a00600 0x100>;
-			interrupts = <1 13 0xf4>;
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
 		};
 
 		L2: l2-cache@00a02000 {

arch/arm/boot/dts/snowball.dts

@@ -0,0 +1,139 @@
+/*
+ * Copyright 2011 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "db8500.dtsi"
+
+/ {
+	model = "Calao Systems Snowball platform with device tree";
+	compatible = "calaosystems,snowball-a9500";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <2>;
+			label = "userpb";
+			gpios = <&gpio1 0>;
+		};
+		button@2 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <3>;
+			label = "userpb";
+			gpios = <&gpio4 23>;
+		};
+		button@3 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <4>;
+			label = "userpb";
+			gpios = <&gpio4 23>;
+		};
+		button@4 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <5>;
+			label = "userpb";
+			gpios = <&gpio5 1>;
+		};
+		button@5 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <6>;
+			label = "userpb";
+			gpios = <&gpio5 2>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		used-led {
+			label = "user_led";
+			gpios = <&gpio4 14>;
+		};
+	};
+
+	soc-u9500 {
+
+		external-bus@50000000 {
+			compatible = "simple-bus";
+			reg = <0x50000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ethernet@50000000 {
+				compatible = "smsc,9111";
+				reg = <0x50000000 0x10000>;
+				interrupts = <12>;
+				interrupt-parent = <&gpio4>;
+			};
+		};
+
+		sdi@80126000 {
+			status = "enabled";
+			cd-gpios = <&gpio6 26>;
+		};
+
+		sdi@80114000 {
+			status = "enabled";
+		};
+
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			tc3589x@42 {
+				//compatible = "tc3589x";
+				reg = <0x42>;
+				interrupts = <25>;
+				interrupt-parent = <&gpio6>;
+			};
+			tps61052@33 {
+				//compatible = "tps61052";
+				reg = <0x33>;
+			};
+		};
+
+		i2c@80128000 {
+			lp5521@0x33 {
+				// compatible = "lp5521";
+				reg = <0x33>;
+			};
+			lp5521@0x34 {
+				// compatible = "lp5521";
+				reg = <0x34>;
+			};
+			bh1780@0x29 {
+				// compatible = "rohm,bh1780gli";
+				reg = <0x33>;
+			};
+		};
+	};
+};

arch/arm/configs/u8500_defconfig

@@ -13,6 +13,7 @@ CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
+CONFIG_MACH_UX500_DT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y

arch/arm/include/asm/localtimer.h

@@ -11,47 +11,24 @@
 #define __ASM_ARM_LOCALTIMER_H
 
 #include <linux/errno.h>
-#include <linux/interrupt.h>
 
 struct clock_event_device;
 
-/*
- * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
- */
-void percpu_timer_setup(void);
+struct local_timer_ops {
+	int  (*setup)(struct clock_event_device *);
+	void (*stop)(struct clock_event_device *);
+};
 
 #ifdef CONFIG_LOCAL_TIMERS
-
-#ifdef CONFIG_HAVE_ARM_TWD
-
-#include "smp_twd.h"
-
-#define local_timer_stop(c)	twd_timer_stop((c))
-
-#else
-
-/*
- * Stop the local timer
- */
-void local_timer_stop(struct clock_event_device *);
-
-#endif
-
 /*
- * Setup a local timer interrupt for a CPU.
+ * Register a local timer driver
  */
-int local_timer_setup(struct clock_event_device *);
-
+int local_timer_register(struct local_timer_ops *);
 #else
-
-static inline int local_timer_setup(struct clock_event_device *evt)
+static inline int local_timer_register(struct local_timer_ops *ops)
 {
 	return -ENXIO;
 }
-
-static inline void local_timer_stop(struct clock_event_device *evt)
-{
-}
 #endif
 
 #endif

arch/arm/include/asm/smp_twd.h

@@ -18,11 +18,28 @@
 #define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
 #define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
 
-struct clock_event_device;
+#include <linux/ioport.h>
 
-extern void __iomem *twd_base;
+struct twd_local_timer {
+	struct resource	res[2];
+};
 
-void twd_timer_setup(struct clock_event_device *);
-void twd_timer_stop(struct clock_event_device *);
+#define DEFINE_TWD_LOCAL_TIMER(name,base,irq)	\
+struct twd_local_timer name __initdata = {	\
+	.res	= {				\
+		DEFINE_RES_MEM(base, 0x10),	\
+		DEFINE_RES_IRQ(irq),		\
+	},					\
+};
+
+int twd_local_timer_register(struct twd_local_timer *);
+
+#ifdef CONFIG_HAVE_ARM_TWD
+void twd_local_timer_of_register(void);
+#else
+static inline void twd_local_timer_of_register(void)
+{
+}
+#endif
 
 #endif

arch/arm/kernel/smp.c

@@ -246,6 +246,8 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
 	store_cpu_topology(cpuid);
 }
 
+static void percpu_timer_setup(void);
+
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
@@ -459,7 +461,20 @@ static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
 	clockevents_register_device(evt);
 }
 
-void __cpuinit percpu_timer_setup(void)
+static struct local_timer_ops *lt_ops;
+
+#ifdef CONFIG_LOCAL_TIMERS
+int local_timer_register(struct local_timer_ops *ops)
+{
+	if (lt_ops)
+		return -EBUSY;
+
+	lt_ops = ops;
+	return 0;
+}
+#endif
+
+static void __cpuinit percpu_timer_setup(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
@@ -467,7 +482,7 @@ void __cpuinit percpu_timer_setup(void)
 	evt->cpumask = cpumask_of(cpu);
 	evt->broadcast = smp_timer_broadcast;
 
-	if (local_timer_setup(evt))
+	if (!lt_ops || lt_ops->setup(evt))
 		broadcast_timer_setup(evt);
 }
 
@@ -482,7 +497,8 @@ static void percpu_timer_stop(void)
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
 
-	local_timer_stop(evt);
+	if (lt_ops)
+		lt_ops->stop(evt);
 }
 #endif
 

arch/arm/kernel/smp_twd.c

@@ -18,20 +18,23 @@
 #include <linux/smp.h>
 #include <linux/jiffies.h>
 #include <linux/clockchips.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
 
 #include <asm/smp_twd.h>
 #include <asm/localtimer.h>
 #include <asm/hardware/gic.h>
 
 /* set up by the platform code */
-void __iomem *twd_base;
+static void __iomem *twd_base;
 
 static struct clk *twd_clk;
 static unsigned long twd_timer_rate;
 
 static struct clock_event_device __percpu **twd_evt;
+static int twd_ppi;
 
 static void twd_set_mode(enum clock_event_mode mode,
 			struct clock_event_device *clk)
@@ -77,7 +80,7 @@ static int twd_set_next_event(unsigned long evt,
  * If a local timer interrupt has occurred, acknowledge and return 1.
  * Otherwise, return 0.
  */
-int twd_timer_ack(void)
+static int twd_timer_ack(void)
 {
 	if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
 		__raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
@@ -87,7 +90,7 @@ int twd_timer_ack(void)
 	return 0;
 }
 
-void twd_timer_stop(struct clock_event_device *clk)
+static void twd_timer_stop(struct clock_event_device *clk)
 {
 	twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
 	disable_percpu_irq(clk->irq);
@@ -222,28 +225,10 @@ static struct clk *twd_get_clock(void)
 /*
  * Setup the local clock events for a CPU.
  */
-void __cpuinit twd_timer_setup(struct clock_event_device *clk)
+static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
 {
 	struct clock_event_device **this_cpu_clk;
 
-	if (!twd_evt) {
-		int err;
-
-		twd_evt = alloc_percpu(struct clock_event_device *);
-		if (!twd_evt) {
-			pr_err("twd: can't allocate memory\n");
-			return;
-		}
-
-		err = request_percpu_irq(clk->irq, twd_handler,
-					 "twd", twd_evt);
-		if (err) {
-			pr_err("twd: can't register interrupt %d (%d)\n",
-			       clk->irq, err);
-			return;
-		}
-	}
-
 	if (!twd_clk)
 		twd_clk = twd_get_clock();
 
@@ -260,6 +245,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clk->rating = 350;
 	clk->set_mode = twd_set_mode;
 	clk->set_next_event = twd_set_next_event;
+	clk->irq = twd_ppi;
 
 	this_cpu_clk = __this_cpu_ptr(twd_evt);
 	*this_cpu_clk = clk;
@@ -267,4 +253,95 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clockevents_config_and_register(clk, twd_timer_rate,
 					0xf, 0xffffffff);
 	enable_percpu_irq(clk->irq, 0);
+
+	return 0;
+}
+
+static struct local_timer_ops twd_lt_ops __cpuinitdata = {
+	.setup	= twd_timer_setup,
+	.stop	= twd_timer_stop,
+};
+
+static int __init twd_local_timer_common_register(void)
+{
+	int err;
+
+	twd_evt = alloc_percpu(struct clock_event_device *);
+	if (!twd_evt) {
+		err = -ENOMEM;
+		goto out_free;
+	}
+
+	err = request_percpu_irq(twd_ppi, twd_handler, "twd", twd_evt);
+	if (err) {
+		pr_err("twd: can't register interrupt %d (%d)\n", twd_ppi, err);
+		goto out_free;
+	}
+
+	err = local_timer_register(&twd_lt_ops);
+	if (err)
+		goto out_irq;
+
+	return 0;
+
+out_irq:
+	free_percpu_irq(twd_ppi, twd_evt);
+out_free:
+	iounmap(twd_base);
+	twd_base = NULL;
+	free_percpu(twd_evt);
+
+	return err;
 }
+
+int __init twd_local_timer_register(struct twd_local_timer *tlt)
+{
+	if (twd_base || twd_evt)
+		return -EBUSY;
+
+	twd_ppi	= tlt->res[1].start;
+
+	twd_base = ioremap(tlt->res[0].start, resource_size(&tlt->res[0]));
+	if (!twd_base)
+		return -ENOMEM;
+
+	return twd_local_timer_common_register();
+}
+
+#ifdef CONFIG_OF
+const static struct of_device_id twd_of_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-twd-timer",	},
+	{ .compatible = "arm,cortex-a5-twd-timer",	},
+	{ .compatible = "arm,arm11mp-twd-timer",	},
+	{ },
+};
+
+void __init twd_local_timer_of_register(void)
+{
+	struct device_node *np;
+	int err;
+
+	np = of_find_matching_node(NULL, twd_of_match);
+	if (!np) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	twd_ppi = irq_of_parse_and_map(np, 0);
+	if (!twd_ppi) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	twd_base = of_iomap(np, 0);
+	if (!twd_base) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = twd_local_timer_common_register();
+
+out:
+	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
+}
+#endif

arch/arm/mach-exynos/mct.c

@@ -21,6 +21,7 @@
 #include <linux/percpu.h>
 
 #include <asm/hardware/gic.h>
+#include <asm/localtimer.h>
 
 #include <plat/cpu.h>
 
@@ -375,7 +376,7 @@ static struct irqaction mct_tick1_event_irq = {
 	.handler	= exynos4_mct_tick_isr,
 };
 
-static void exynos4_mct_tick_init(struct clock_event_device *evt)
+static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt;
 	unsigned int cpu = smp_processor_id();
@@ -417,17 +418,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 	} else {
 		enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
 	}
-}
-
-/* Setup the local clock events for a CPU */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	exynos4_mct_tick_init(evt);
 
 	return 0;
 }
 
-void local_timer_stop(struct clock_event_device *evt)
+static void exynos4_local_timer_stop(struct clock_event_device *evt)
 {
 	unsigned int cpu = smp_processor_id();
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
@@ -439,6 +434,11 @@ void local_timer_stop(struct clock_event_device *evt)
 	else
 		disable_percpu_irq(IRQ_MCT_LOCALTIMER);
 }
+
+static struct local_timer_ops exynos4_mct_tick_ops __cpuinitdata = {
+	.setup	= exynos4_local_timer_setup,
+	.stop	= exynos4_local_timer_stop,
+};
 #endif /* CONFIG_LOCAL_TIMERS */
 
 static void __init exynos4_timer_resources(void)
@@ -458,6 +458,8 @@ static void __init exynos4_timer_resources(void)
 		WARN(err, "MCT: can't request IRQ %d (%d)\n",
 		     IRQ_MCT_LOCALTIMER, err);
 	}
+
+	local_timer_register(&exynos4_mct_tick_ops);
 #endif /* CONFIG_LOCAL_TIMERS */
 }
 

arch/arm/mach-highbank/Makefile

@@ -1,6 +1,5 @@
 obj-y					:= clock.o highbank.o system.o
 obj-$(CONFIG_DEBUG_HIGHBANK_UART)	+= lluart.o
 obj-$(CONFIG_SMP)			+= platsmp.o
-obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
 obj-$(CONFIG_PM_SLEEP)			+= pm.o

arch/arm/mach-highbank/highbank.c

@@ -27,6 +27,7 @@
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
+#include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
 #include <asm/hardware/gic.h>
@@ -111,6 +112,8 @@ static void __init highbank_timer_init(void)
 
 	sp804_clocksource_init(timer_base + 0x20, "timer1");
 	sp804_clockevents_init(timer_base, irq, "timer0");
+
+	twd_local_timer_of_register();
 }
 
 static struct sys_timer highbank_timer = {

arch/arm/mach-highbank/localtimer.c

@@ -1,40 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- * Based on localtimer.c, Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/init.h>
-#include <linux/clockchips.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-
-#include <asm/smp_twd.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
-	if (!twd_base) {
-		twd_base = of_iomap(np, 0);
-		WARN_ON(!twd_base);
-	}
-	evt->irq = irq_of_parse_and_map(np, 0);
-	twd_timer_setup(evt);
-	return 0;
-}

arch/arm/mach-imx/Makefile

@@ -72,7 +72,6 @@ obj-$(CONFIG_CPU_V7) += head-v7.o
 AFLAGS_head-v7.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
 obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)

arch/arm/mach-imx/localtimer.c

@@ -1,35 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/clockchips.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/smp_twd.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
-	if (!twd_base) {
-		twd_base = of_iomap(np, 0);
-		WARN_ON(!twd_base);
-	}
-	evt->irq = irq_of_parse_and_map(np, 0);
-	twd_timer_setup(evt);
-
-	return 0;
-}

arch/arm/mach-imx/mach-imx6q.c

@@ -21,6 +21,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/micrel_phy.h>
+#include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
@@ -120,6 +121,7 @@ static void __init imx6q_init_irq(void)
 static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
+	twd_local_timer_of_register();
 }
 
 static struct sys_timer imx6q_timer = {

arch/arm/mach-msm/timer.c

@@ -127,6 +127,45 @@ static struct clocksource msm_clocksource = {
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+#ifdef CONFIG_LOCAL_TIMERS
+static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt)
+{
+	/* Use existing clock_event for cpu 0 */
+	if (!smp_processor_id())
+		return 0;
+
+	writel_relaxed(0, event_base + TIMER_ENABLE);
+	writel_relaxed(0, event_base + TIMER_CLEAR);
+	writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
+	evt->irq = msm_clockevent.irq;
+	evt->name = "local_timer";
+	evt->features = msm_clockevent.features;
+	evt->rating = msm_clockevent.rating;
+	evt->set_mode = msm_timer_set_mode;
+	evt->set_next_event = msm_timer_set_next_event;
+	evt->shift = msm_clockevent.shift;
+	evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
+	evt->min_delta_ns = clockevent_delta2ns(4, evt);
+
+	*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
+	clockevents_register_device(evt);
+	enable_percpu_irq(evt->irq, 0);
+	return 0;
+}
+
+static void msm_local_timer_stop(struct clock_event_device *evt)
+{
+	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+	disable_percpu_irq(evt->irq);
+}
+
+static struct local_timer_ops msm_local_timer_ops __cpuinitdata = {
+	.setup	= msm_local_timer_setup,
+	.stop	= msm_local_timer_stop,
+};
+#endif /* CONFIG_LOCAL_TIMERS */
+
 static void __init msm_timer_init(void)
 {
 	struct clock_event_device *ce = &msm_clockevent;
@@ -173,8 +212,12 @@ static void __init msm_timer_init(void)
 		*__this_cpu_ptr(msm_evt.percpu_evt) = ce;
 		res = request_percpu_irq(ce->irq, msm_timer_interrupt,
 					 ce->name, msm_evt.percpu_evt);
-		if (!res)
+		if (!res) {
 			enable_percpu_irq(ce->irq, 0);
+#ifdef CONFIG_LOCAL_TIMERS
+			local_timer_register(&msm_local_timer_ops);
+#endif
+		}
 	} else {
 		msm_evt.evt = ce;
 		res = request_irq(ce->irq, msm_timer_interrupt,
@@ -191,40 +234,6 @@ err:
 		pr_err("clocksource_register failed\n");
 }
 
-#ifdef CONFIG_LOCAL_TIMERS
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	/* Use existing clock_event for cpu 0 */
-	if (!smp_processor_id())
-		return 0;
-
-	writel_relaxed(0, event_base + TIMER_ENABLE);
-	writel_relaxed(0, event_base + TIMER_CLEAR);
-	writel_relaxed(~0, event_base + TIMER_MATCH_VAL);
-	evt->irq = msm_clockevent.irq;
-	evt->name = "local_timer";
-	evt->features = msm_clockevent.features;
-	evt->rating = msm_clockevent.rating;
-	evt->set_mode = msm_timer_set_mode;
-	evt->set_next_event = msm_timer_set_next_event;
-	evt->shift = msm_clockevent.shift;
-	evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
-	evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
-	evt->min_delta_ns = clockevent_delta2ns(4, evt);
-
-	*__this_cpu_ptr(msm_evt.percpu_evt) = evt;
-	clockevents_register_device(evt);
-	enable_percpu_irq(evt->irq, 0);
-	return 0;
-}
-
-void local_timer_stop(struct clock_event_device *evt)
-{
-	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
-	disable_percpu_irq(evt->irq);
-}
-#endif /* CONFIG_LOCAL_TIMERS */
-
 struct sys_timer msm_timer = {
 	.init = msm_timer_init
 };

arch/arm/mach-nomadik/board-nhk8815.c

@@ -27,11 +27,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+#include <asm/mach/time.h>
 
 #include <plat/gpio-nomadik.h>
 #include <plat/mtu.h>
 
-#include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
 
@@ -246,10 +246,7 @@ static void __init nomadik_timer_init(void)
 	src_cr |= SRC_CR_INIT_VAL;
 	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
 
-	/* Save global pointer to mtu, used by platform timer code */
-	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
-
-	nmdk_timer_init();
+	nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE));
 }
 
 static struct sys_timer nomadik_timer = {

arch/arm/mach-nomadik/include/mach/setup.h

@@ -1,19 +0,0 @@
-
-/*
- * These symbols are needed for board-specific files to call their
- * own cpu-specific files
- */
-
-#ifndef __ASM_ARCH_SETUP_H
-#define __ASM_ARCH_SETUP_H
-
-#include <asm/mach/time.h>
-#include <linux/init.h>
-
-#ifdef CONFIG_NOMADIK_8815
-
-extern void nmdk_timer_init(void);
-
-#endif /* NOMADIK_8815 */
-
-#endif /*  __ASM_ARCH_SETUP_H */

arch/arm/mach-omap2/Makefile

@@ -23,7 +23,6 @@ obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
 
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
-obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap4-common.o omap-wakeupgen.o \
 					   sleep44xx.o

arch/arm/mach-omap2/timer-mpu.c

@@ -1,39 +0,0 @@
-/*
- * The MPU local timer source file. In OMAP4, both cortex-a9 cores have
- * own timer in it's MPU domain. These timers will be driving the
- * linux kernel SMP tick framework when active. These timers are not
- * part of the wake up domain.
- *
- * Copyright (C) 2009 Texas Instruments, Inc.
- *
- * Author:
- *      Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This file is based on arm realview smp platform file.
- * Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-#include <asm/irq.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	/* Local timers are not supprted on OMAP4430 ES1.0 */
-	if (omap_rev() == OMAP4430_REV_ES1_0)
-		return -ENXIO;
-
-	evt->irq = OMAP44XX_IRQ_LOCALTIMER;
-	twd_timer_setup(evt);
-	return 0;
-}
-

arch/arm/mach-omap2/timer.c

@@ -39,7 +39,7 @@
 
 #include <asm/mach/time.h>
 #include <plat/dmtimer.h>
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
 #include "common.h"
 #include <plat/omap_hwmod.h>
@@ -324,14 +324,26 @@ OMAP_SYS_TIMER(3_secure)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-static void __init omap4_timer_init(void)
-{
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
-	BUG_ON(!twd_base);
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+			      OMAP44XX_LOCAL_TWD_BASE,
+			      OMAP44XX_IRQ_LOCALTIMER);
 #endif
+
+static void __init omap4_timer_init(void)
+{
 	omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE);
 	omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE);
+#ifdef CONFIG_LOCAL_TIMERS
+	/* Local timers are not supprted on OMAP4430 ES1.0 */
+	if (omap_rev() != OMAP4430_REV_ES1_0) {
+		int err;
+
+		err = twd_local_timer_register(&twd_local_timer);
+		if (err)
+			pr_err("twd_local_timer_register failed %d\n", err);
+	}
+#endif
 }
 OMAP_SYS_TIMER(4)
 #endif

arch/arm/mach-realview/realview_eb.c

@@ -36,7 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -383,6 +383,23 @@ static void realview_eb11mp_fixup(void)
 	realview_eb_isp1761_resources[1].end	= IRQ_EB11MP_USB;
 }
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+			      REALVIEW_EB11MP_TWD_BASE,
+			      IRQ_LOCALTIMER);
+
+static void __init realview_eb_twd_init(void)
+{
+	if (core_tile_eb11mp() || core_tile_a9mp()) {
+		int err = twd_local_timer_register(&twd_local_timer);
+		if (err)
+			pr_err("twd_local_timer_register failed %d\n", err);
+	}
+}
+#else
+#define realview_eb_twd_init()	do { } while(0)
+#endif
+
 static void __init realview_eb_timer_init(void)
 {
 	unsigned int timer_irq;
@@ -392,15 +409,13 @@ static void __init realview_eb_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
 
-	if (core_tile_eb11mp() || core_tile_a9mp()) {
-#ifdef CONFIG_LOCAL_TIMERS
-		twd_base = __io_address(REALVIEW_EB11MP_TWD_BASE);
-#endif
+	if (core_tile_eb11mp() || core_tile_a9mp())
 		timer_irq = IRQ_EB11MP_TIMER0_1;
-	} else
+	else
 		timer_irq = IRQ_EB_TIMER0_1;
 
 	realview_timer_init(timer_irq);
+	realview_eb_twd_init();
 }
 
 static struct sys_timer realview_eb_timer = {

arch/arm/mach-realview/realview_pb11mp.c

@@ -36,7 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -290,6 +290,21 @@ static void __init gic_init_irq(void)
 	gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
 }
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+			      REALVIEW_TC11MP_TWD_BASE,
+			      IRQ_LOCALTIMER);
+
+static void __init realview_pb11mp_twd_init(void)
+{
+	int err = twd_local_timer_register(&twd_local_timer);
+	if (err)
+		pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define realview_pb11mp_twd_init()	do {} while(0)
+#endif
+
 static void __init realview_pb11mp_timer_init(void)
 {
 	timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE);
@@ -297,10 +312,8 @@ static void __init realview_pb11mp_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
 
-#ifdef CONFIG_LOCAL_TIMERS
-	twd_base = __io_address(REALVIEW_TC11MP_TWD_BASE);
-#endif
 	realview_timer_init(IRQ_TC11MP_TIMER0_1);
+	realview_pb11mp_twd_init();
 }
 
 static struct sys_timer realview_pb11mp_timer = {

arch/arm/mach-realview/realview_pbx.c

@@ -298,6 +298,21 @@ static void __init gic_init_irq(void)
 	}
 }
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+			      REALVIEW_PBX_TILE_TWD_BASE,
+			      IRQ_LOCALTIMER);
+
+static void __init realview_pbx_twd_init(void)
+{
+	int err = twd_local_timer_register(&twd_local_timer);
+	if (err)
+		pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define realview_pbx_twd_init()	do { } while(0)
+#endif
+
 static void __init realview_pbx_timer_init(void)
 {
 	timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
@@ -305,11 +320,8 @@ static void __init realview_pbx_timer_init(void)
 	timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
 	timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
 
-#ifdef CONFIG_LOCAL_TIMERS
-	if (core_tile_pbx11mp() || core_tile_pbxa9mp())
-		twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
-#endif
 	realview_timer_init(IRQ_PBX_TIMER0_1);
+	realview_pbx_twd_init();
 }
 
 static struct sys_timer realview_pbx_timer = {

arch/arm/mach-shmobile/Makefile

@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
 # SMP objects
 smp-y				:= platsmp.o headsmp.o
 smp-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-smp-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
 smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o
 smp-$(CONFIG_ARCH_R8A7779)	+= smp-r8a7779.o
 

arch/arm/mach-shmobile/include/mach/common.h

@@ -2,6 +2,8 @@
 #define __ARCH_MACH_COMMON_H
 
 extern struct sys_timer shmobile_timer;
+struct twd_local_timer;
+void shmobile_twd_init(struct twd_local_timer *twd_local_timer);
 extern void shmobile_setup_console(void);
 extern void shmobile_secondary_vector(void);
 extern int shmobile_platform_cpu_kill(unsigned int cpu);

arch/arm/mach-shmobile/localtimer.c

@@ -1,26 +0,0 @@
-/*
- * SMP support for R-Mobile / SH-Mobile - local timer portion
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * Based on vexpress, Copyright (C) 2002 ARM Ltd, All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	evt->irq = 29;
-	twd_timer_setup(evt);
-	return 0;
-}

arch/arm/mach-shmobile/platsmp.c

@@ -17,7 +17,6 @@
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <asm/hardware/gic.h>
-#include <asm/localtimer.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -64,6 +64,8 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
+
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -82,11 +84,7 @@ unsigned int __init r8a7779_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
-#ifdef CONFIG_HAVE_ARM_TWD
-	/* twd_base needs to be initialized before percpu_timer_setup() */
-	twd_base = (void __iomem *)0xf0000600;
-#endif
-
+	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -42,6 +42,8 @@ static void __iomem *scu_base_addr(void)
 static DEFINE_SPINLOCK(scu_lock);
 static unsigned long tmp;
 
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, 0xf0000600, 29);
+
 static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
 {
 	void __iomem *scu_base = scu_base_addr();
@@ -60,11 +62,7 @@ unsigned int __init sh73a0_get_core_count(void)
 {
 	void __iomem *scu_base = scu_base_addr();
 
-#ifdef CONFIG_HAVE_ARM_TWD
-	/* twd_base needs to be initialized before percpu_timer_setup() */
-	twd_base = (void __iomem *)0xf0000600;
-#endif
-
+	shmobile_twd_init(&twd_local_timer);
 	return scu_get_core_count(scu_base);
 }
 

arch/arm/mach-shmobile/timer.c

@@ -20,6 +20,7 @@
  */
 #include <linux/platform_device.h>
 #include <asm/mach/time.h>
+#include <asm/smp_twd.h>
 
 static void __init shmobile_late_time_init(void)
 {
@@ -41,6 +42,15 @@ static void __init shmobile_timer_init(void)
 	late_time_init = shmobile_late_time_init;
 }
 
+void __init shmobile_twd_init(struct twd_local_timer *twd_local_timer)
+{
+#ifdef CONFIG_HAVE_ARM_TWD
+	int err = twd_local_timer_register(twd_local_timer);
+	if (err)
+		pr_err("twd_local_timer_register failed %d\n", err);
+#endif
+}
+
 struct sys_timer shmobile_timer = {
 	.init		= shmobile_timer_init,
 };

arch/arm/mach-tegra/Makefile

@@ -13,7 +13,7 @@ obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= pinmux-tegra20-tables.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= pinmux-tegra30-tables.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= board-dt-tegra30.o
-obj-$(CONFIG_SMP)                       += platsmp.o localtimer.o headsmp.o
+obj-$(CONFIG_SMP)                       += platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_TEGRA_SYSTEM_DMA)		+= dma.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o

arch/arm/mach-tegra/localtimer.c

@@ -1,26 +0,0 @@
-/*
- *  arch/arm/mach-tegra/localtimer.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-#include <asm/irq.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	evt->irq = IRQ_LOCALTIMER;
-	twd_timer_setup(evt);
-	return 0;
-}

arch/arm/mach-tegra/timer.c

@@ -28,7 +28,7 @@
 #include <linux/io.h>
 
 #include <asm/mach/time.h>
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
 
 #include <mach/iomap.h>
@@ -162,6 +162,21 @@ static struct irqaction tegra_timer_irq = {
 	.irq		= INT_TMR3,
 };
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer,
+			      TEGRA_ARM_PERIF_BASE + 0x600,
+			      IRQ_LOCALTIMER);
+
+static void __init tegra_twd_init(void)
+{
+	int err = twd_local_timer_register(&twd_local_timer);
+	if (err)
+		pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define tegra_twd_init()	do {} while(0)
+#endif
+
 static void __init tegra_init_timer(void)
 {
 	struct clk *clk;
@@ -188,10 +203,6 @@ static void __init tegra_init_timer(void)
 	else
 		clk_enable(clk);
 
-#ifdef CONFIG_HAVE_ARM_TWD
-	twd_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x600);
-#endif
-
 	switch (rate) {
 	case 12000000:
 		timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -231,6 +242,7 @@ static void __init tegra_init_timer(void)
 	tegra_clockevent.cpumask = cpu_all_mask;
 	tegra_clockevent.irq = tegra_timer_irq.irq;
 	clockevents_register_device(&tegra_clockevent);
+	tegra_twd_init();
 }
 
 struct sys_timer tegra_timer = {

arch/arm/mach-ux500/Kconfig

@@ -28,6 +28,7 @@ config MACH_U8500
 	bool "U8500 Development platform"
 	depends on UX500_SOC_DB8500
 	select TPS6105X
+	select SOC_BUS
 	help
 	  Include support for the mop500 development platform.
 
@@ -49,6 +50,12 @@ config MACH_U5500
 	depends on UX500_SOC_DB5500
 	help
 	  Include support for the U5500 development platform.
+
+config MACH_UX500_DT
+	bool "Generic U8500 support using device tree"
+	depends on MACH_U8500
+	select USE_OF
+
 endmenu
 
 config UX500_DEBUG_UART

arch/arm/mach-ux500/Makefile

@@ -15,7 +15,6 @@ obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
-obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
 obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem-irq-db5500.o
 obj-$(CONFIG_U5500_MBOX)	+= mbox-db5500.o
 

arch/arm/mach-ux500/Makefile.boot

@@ -2,3 +2,4 @@
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
 
+dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -104,7 +104,7 @@ static struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(void)
+static void sdi0_configure(struct device *parent)
 {
 	int ret;
 
@@ -123,15 +123,15 @@ static void sdi0_configure(void)
 	gpio_direction_output(sdi0_en, 1);
 
 	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
 }
 
-void mop500_sdi_tc35892_init(void)
+void mop500_sdi_tc35892_init(struct device *parent)
 {
 	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
 	sdi0_en = GPIO_SDMMC_EN;
 	sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
 /*
@@ -246,12 +246,13 @@ static struct mmci_platform_data mop500_sdi4_data = {
 #endif
 };
 
-void __init mop500_sdi_init(void)
+void __init mop500_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+
 	/*
 	 * On boards with the TC35892 GPIO expander, sdi0 will finally
 	 * be added when the TC35892 initializes and calls
@@ -259,31 +260,31 @@ void __init mop500_sdi_init(void)
 	 */
 }
 
-void __init snowball_sdi_init(void)
+void __init snowball_sdi_init(struct device *parent)
 {
 	/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
 	mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
 	mop500_sdi0_data.cd_invert = true;
 	sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
 	sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 }
 
-void __init hrefv60_sdi_init(void)
+void __init hrefv60_sdi_init(struct device *parent)
 {
 	/* PoP:ed eMMC */
-	db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
 	/* On-board eMMC */
-	db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
 	/* External Micro SD slot */
 	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
 	sdi0_en = HREFV60_SDMMC_EN_GPIO;
 	sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
-	sdi0_configure();
+	sdi0_configure(parent);
 	/* WLAN SDIO channel */
-	db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
+	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
 }

arch/arm/mach-ux500/board-mop500.c

@@ -30,6 +30,9 @@
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
 
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -226,7 +229,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = {
 
 static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
 {
-	mop500_sdi_tc35892_init();
+	struct device *parent = NULL;
+#if 0
+	/* FIXME: Is the sdi actually part of tc3589x? */
+	parent = tc3589x->dev;
+#endif
+	mop500_sdi_tc35892_init(parent);
 }
 
 static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -353,12 +361,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
 {
-	db8500_add_i2c0(&u8500_i2c0_data);
-	db8500_add_i2c1(&u8500_i2c1_data);
-	db8500_add_i2c2(&u8500_i2c2_data);
-	db8500_add_i2c3(&u8500_i2c3_data);
+	db8500_add_i2c0(parent, &u8500_i2c0_data);
+	db8500_add_i2c1(parent, &u8500_i2c1_data);
+	db8500_add_i2c2(parent, &u8500_i2c2_data);
+	db8500_add_i2c3(parent, &u8500_i2c3_data);
 }
 
 static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -435,7 +443,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
 };
 #endif
 
-static struct pl022_ssp_controller ssp0_platform_data = {
+static struct pl022_ssp_controller ssp0_plat = {
 	.bus_id = 0,
 #ifdef CONFIG_STE_DMA40
 	.enable_dma = 1,
@@ -451,9 +459,9 @@ static struct pl022_ssp_controller ssp0_platform_data = {
 	.num_chipselect = 5,
 };
 
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
 {
-	db8500_add_ssp0(&ssp0_platform_data);
+	db8500_add_ssp0(parent, &ssp0_plat);
 }
 
 #ifdef CONFIG_STE_DMA40
@@ -587,11 +595,11 @@ static struct amba_pl011_data uart2_plat = {
 #endif
 };
 
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
 {
-	db8500_add_uart0(&uart0_plat);
-	db8500_add_uart1(&uart1_plat);
-	db8500_add_uart2(&uart2_plat);
+	db8500_add_uart0(parent, &uart0_plat);
+	db8500_add_uart1(parent, &uart1_plat);
+	db8500_add_uart2(parent, &uart2_plat);
 }
 
 static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -603,21 +611,27 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 
 static void __init mop500_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
+	int i;
 
 	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	mop500_pins_init();
 
+	/* FIXME: parent of ab8500 should be prcmu */
+	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+		mop500_platform_devs[i]->dev.parent = parent;
+
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	mop500_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	mop500_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -631,19 +645,24 @@ static void __init mop500_init_machine(void)
 
 static void __init snowball_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
+	int i;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	snowball_pins_init();
 
+	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
+		snowball_platform_devs[i]->dev.parent = parent;
+
 	platform_add_devices(snowball_platform_devs,
 			ARRAY_SIZE(snowball_platform_devs));
 
-	mop500_i2c_init();
-	snowball_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	snowball_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -656,7 +675,9 @@ static void __init snowball_init_machine(void)
 
 static void __init hrefv60_init_machine(void)
 {
+	struct device *parent = NULL;
 	int i2c0_devs;
+	int i;
 
 	/*
 	 * The HREFv60 board removed a GPIO expander and routed
@@ -665,17 +686,20 @@ static void __init hrefv60_init_machine(void)
 	 */
 	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
 
-	u8500_init_devices();
+	parent = u8500_init_devices();
 
 	hrefv60_pins_init();
 
+	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+		mop500_platform_devs[i]->dev.parent = parent;
+
 	platform_add_devices(mop500_platform_devs,
 			ARRAY_SIZE(mop500_platform_devs));
 
-	mop500_i2c_init();
-	hrefv60_sdi_init();
-	mop500_spi_init();
-	mop500_uart_init();
+	mop500_i2c_init(parent);
+	hrefv60_sdi_init(parent);
+	mop500_spi_init(parent);
+	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 
@@ -718,3 +742,94 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= snowball_init_machine,
 MACHINE_END
+
+#ifdef CONFIG_MACH_UX500_DT
+
+struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
+	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
+	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
+	{},
+};
+
+static const struct of_device_id u8500_soc_node[] = {
+	/* only create devices below soc node */
+	{ .compatible = "stericsson,db8500", },
+	{ },
+};
+
+static void __init u8500_init_machine(void)
+{
+	struct device *parent = NULL;
+	int i2c0_devs;
+	int i;
+
+	parent = u8500_init_devices();
+	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+		mop500_platform_devs[i]->dev.parent = parent;
+	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
+		snowball_platform_devs[i]->dev.parent = parent;
+
+	/* automatically probe child nodes of db8500 device */
+	of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);
+
+	if (of_machine_is_compatible("st-ericsson,mop500")) {
+		mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+		mop500_pins_init();
+
+		platform_add_devices(mop500_platform_devs,
+				ARRAY_SIZE(mop500_platform_devs));
+
+		mop500_sdi_init(parent);
+	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+		snowball_pins_init();
+		platform_add_devices(snowball_platform_devs,
+				ARRAY_SIZE(snowball_platform_devs));
+
+		snowball_sdi_init(parent);
+	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
+		/*
+		 * The HREFv60 board removed a GPIO expander and routed
+		 * all these GPIO pins to the internal GPIO controller
+		 * instead.
+		 */
+		mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+		hrefv60_pins_init();
+		platform_add_devices(mop500_platform_devs,
+				ARRAY_SIZE(mop500_platform_devs));
+
+		hrefv60_sdi_init(parent);
+	}
+	mop500_i2c_init(parent);
+
+	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+	i2c_register_board_info(2, mop500_i2c2_devices,
+				ARRAY_SIZE(mop500_i2c2_devices));
+
+	/* This board has full regulator constraints */
+	regulator_has_full_constraints();
+}
+
+static const char * u8500_dt_board_compat[] = {
+	"calaosystems,snowball-a9500",
+	"st-ericsson,hrefv60+",
+	"st-ericsson,u8500",
+	"st-ericsson,mop500",
+	NULL,
+};
+
+
+DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+	.map_io		= u8500_map_io,
+	.init_irq	= ux500_init_irq,
+	/* we re-use nomadik timer here */
+	.timer		= &ux500_timer,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= u8500_init_machine,
+	.dt_compat      = u8500_dt_board_compat,
+MACHINE_END
+#endif

arch/arm/mach-ux500/board-mop500.h

@@ -75,10 +75,10 @@
 
 struct i2c_board_info;
 
-extern void mop500_sdi_init(void);
-extern void snowball_sdi_init(void);
-extern void hrefv60_sdi_init(void);
-extern void mop500_sdi_tc35892_init(void);
+extern void mop500_sdi_init(struct device *parent);
+extern void snowball_sdi_init(struct device *parent);
+extern void hrefv60_sdi_init(struct device *parent);
+extern void mop500_sdi_tc35892_init(struct device *parent);
 void __init mop500_u8500uib_init(void);
 void __init mop500_stuib_init(void);
 void __init mop500_pins_init(void);

arch/arm/mach-ux500/board-u5500-sdi.c

@@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = {
 #endif
 };
 
-void __init u5500_sdi_init(void)
+void __init u5500_sdi_init(struct device *parent)
 {
 	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
 
-	db5500_add_sdi0(&u5500_sdi0_data);
+	db5500_add_sdi0(parent, &u5500_sdi0_data);
 }

arch/arm/mach-ux500/board-u5500.c

@@ -97,9 +97,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
 	},
 };
 
-static void __init u5500_i2c_init(void)
+static void __init u5500_i2c_init(struct device *parent)
 {
-	db5500_add_i2c2(&u5500_i2c2_data);
+	db5500_add_i2c2(parent, &u5500_i2c2_data);
 	i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
 }
 
@@ -126,20 +126,27 @@ static struct platform_device *u5500_platform_devices[] __initdata = {
 	&ab5500_device,
 };
 
-static void __init u5500_uart_init(void)
+static void __init u5500_uart_init(struct device *parent)
 {
-	db5500_add_uart0(NULL);
-	db5500_add_uart1(NULL);
-	db5500_add_uart2(NULL);
+	db5500_add_uart0(parent, NULL);
+	db5500_add_uart1(parent, NULL);
+	db5500_add_uart2(parent, NULL);
 }
 
 static void __init u5500_init_machine(void)
 {
-	u5500_init_devices();
+	struct device *parent = NULL;
+	int i;
+
+	parent = u5500_init_devices();
 	nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-	u5500_i2c_init();
-	u5500_sdi_init();
-	u5500_uart_init();
+
+	u5500_i2c_init(parent);
+	u5500_sdi_init(parent);
+	u5500_uart_init(parent);
+
+	for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
+		u5500_platform_devices[i]->dev.parent = parent;
 
 	platform_add_devices(u5500_platform_devices,
 		ARRAY_SIZE(u5500_platform_devices));

arch/arm/mach-ux500/cache-l2x0.c

@@ -5,6 +5,8 @@
  */
 
 #include <linux/io.h>
+#include <linux/of.h>
+
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/hardware.h>
@@ -45,7 +47,10 @@ static int __init ux500_l2x0_init(void)
 	ux500_l2x0_unlock();
 
 	/* 64KB way size, 8 way associativity, force WA */
-	l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+	if (of_have_populated_dt())
+		l2x0_of_init(0x3e060000, 0xc0000fff);
+	else
+		l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
 
 	/*
 	 * We can't disable l2 as we are in non secure mode, currently

arch/arm/mach-ux500/cpu-db5500.c

@@ -147,13 +147,13 @@ static resource_size_t __initdata db5500_gpio_base[] = {
 	U5500_GPIOBANK7_BASE,
 };
 
-static void __init db5500_add_gpios(void)
+static void __init db5500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		/* No custom data yet */
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
 			 IRQ_DB5500_GPIO0, &pdata);
 }
 
@@ -212,14 +212,36 @@ static int usb_db5500_tx_dma_cfg[] = {
 	DB5500_DMA_DEV38_USB_OTG_OEP_8
 };
 
-void __init u5500_init_devices(void)
+static const char *db5500_read_soc_id(void)
 {
-	db5500_add_gpios();
+	return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
+}
+
+static struct device * __init db5500_soc_device_init(void)
+{
+	const char *soc_id = db5500_read_soc_id();
+
+	return ux500_soc_device_init(soc_id);
+}
+
+struct device * __init u5500_init_devices(void)
+{
+	struct device *parent;
+	int i;
+
+	parent = db5500_soc_device_init();
+
+	db5500_add_gpios(parent);
 	db5500_pmu_init();
-	db5500_dma_init();
-	db5500_add_rtc();
-	db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+	db5500_dma_init(parent);
+	db5500_add_rtc(parent);
+	db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+
+	for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++)
+		db5500_platform_devs[i]->dev.parent = parent;
 
 	platform_add_devices(db5500_platform_devs,
 			     ARRAY_SIZE(db5500_platform_devs));
+
+	return parent;
 }

arch/arm/mach-ux500/cpu-db8500.c

@@ -24,6 +24,7 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/usb.h>
+#include <mach/db8500-regs.h>
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
@@ -132,13 +133,13 @@ static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK8_BASE,
 };
 
-static void __init db8500_add_gpios(void)
+static void __init db8500_add_gpios(struct device *parent)
 {
 	struct nmk_gpio_platform_data pdata = {
 		.supports_sleepmode = true,
 	};
 
-	dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+	dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
 			 IRQ_DB8500_GPIO0, &pdata);
 }
 
@@ -164,17 +165,44 @@ static int usb_db8500_tx_dma_cfg[] = {
 	DB8500_DMA_DEV39_USB_OTG_OEP_8
 };
 
+static const char *db8500_read_soc_id(void)
+{
+	void __iomem *uid = __io_address(U8500_BB_UID_BASE);
+
+	return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
+			 readl((u32 *)uid+1),
+			 readl((u32 *)uid+1), readl((u32 *)uid+2),
+			 readl((u32 *)uid+3), readl((u32 *)uid+4));
+}
+
+static struct device * __init db8500_soc_device_init(void)
+{
+	const char *soc_id = db8500_read_soc_id();
+
+	return ux500_soc_device_init(soc_id);
+}
+
 /*
  * This function is called from the board init
  */
-void __init u8500_init_devices(void)
+struct device * __init u8500_init_devices(void)
 {
-	db8500_add_rtc();
-	db8500_add_gpios();
-	db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+	struct device *parent;
+	int i;
+
+	parent = db8500_soc_device_init();
+
+	db8500_add_rtc(parent);
+	db8500_add_gpios(parent);
+	db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+
+	platform_device_register_data(parent,
+		"cpufreq-u8500", -1, NULL, 0);
+
+	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
+		platform_devs[i]->dev.parent = parent;
 
-	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
-	return ;
+	return parent;
 }

arch/arm/mach-ux500/cpu.c

@@ -2,6 +2,7 @@
  * Copyright (C) ST-Ericsson SA 2010
  *
  * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
  * License terms: GNU General Public License (GPL) version 2
  */
 
@@ -11,10 +12,15 @@
 #include <linux/mfd/db8500-prcmu.h>
 #include <linux/mfd/db5500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/sys_soc.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
-#include <asm/localtimer.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -24,6 +30,11 @@
 
 void __iomem *_PRCMU_BASE;
 
+static const struct of_device_id ux500_dt_irq_match[] = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{},
+};
+
 void __init ux500_init_irq(void)
 {
 	void __iomem *dist_base;
@@ -38,7 +49,12 @@ void __init ux500_init_irq(void)
 	} else
 		ux500_unknown_soc();
 
-	gic_init(0, 29, dist_base, cpu_base);
+#ifdef CONFIG_OF
+	if (of_have_populated_dt())
+		of_irq_init(ux500_dt_irq_match);
+	else
+#endif
+		gic_init(0, 29, dist_base, cpu_base);
 
 	/*
 	 * Init clocks here so that they are available for system timer
@@ -50,3 +66,73 @@ void __init ux500_init_irq(void)
 		db8500_prcmu_early_init();
 	clk_init();
 }
+
+static const char * __init ux500_get_machine(void)
+{
+	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
+}
+
+static const char * __init ux500_get_family(void)
+{
+	return kasprintf(GFP_KERNEL, "ux500");
+}
+
+static const char * __init ux500_get_revision(void)
+{
+	unsigned int rev = dbx500_revision();
+
+	if (rev == 0x01)
+		return kasprintf(GFP_KERNEL, "%s", "ED");
+	else if (rev >= 0xA0)
+		return kasprintf(GFP_KERNEL, "%d.%d",
+				 (rev >> 4) - 0xA + 1, rev & 0xf);
+
+	return kasprintf(GFP_KERNEL, "%s", "Unknown");
+}
+
+static ssize_t ux500_get_process(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	if (dbx500_id.process == 0x00)
+		return sprintf(buf, "Standard\n");
+
+	return sprintf(buf, "%02xnm\n", dbx500_id.process);
+}
+
+static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
+				     const char *soc_id)
+{
+	soc_dev_attr->soc_id   = soc_id;
+	soc_dev_attr->machine  = ux500_get_machine();
+	soc_dev_attr->family   = ux500_get_family();
+	soc_dev_attr->revision = ux500_get_revision();
+}
+
+struct device_attribute ux500_soc_attr =
+	__ATTR(process,  S_IRUGO, ux500_get_process,  NULL);
+
+struct device * __init ux500_soc_device_init(const char *soc_id)
+{
+	struct device *parent;
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return ERR_PTR(-ENOMEM);
+
+	soc_info_populate(soc_dev_attr, soc_id);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR_OR_NULL(soc_dev)) {
+	        kfree(soc_dev_attr);
+		return NULL;
+	}
+
+	parent = soc_device_to_device(soc_dev);
+	if (!IS_ERR_OR_NULL(parent))
+		device_create_file(parent, &ux500_soc_attr);
+
+	return parent;
+}

arch/arm/mach-ux500/devices-common.c

@@ -20,8 +20,9 @@
 #include "devices-common.h"
 
 struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
-		       int irq, void *pdata, unsigned int periphid)
+dbx500_add_amba_device(struct device *parent, const char *name,
+		       resource_size_t base, int irq, void *pdata,
+		       unsigned int periphid)
 {
 	struct amba_device *dev;
 	int ret;
@@ -39,6 +40,8 @@ dbx500_add_amba_device(const char *name, resource_size_t base,
 
 	dev->dev.platform_data = pdata;
 
+	dev->dev.parent = parent;
+
 	ret = amba_device_add(dev, &iomem_resource);
 	if (ret) {
 		amba_device_put(dev);
@@ -49,60 +52,7 @@ dbx500_add_amba_device(const char *name, resource_size_t base,
 }
 
 static struct platform_device *
-dbx500_add_platform_device(const char *name, int id, void *pdata,
-			   struct resource *res, int resnum)
-{
-	struct platform_device *dev;
-	int ret;
-
-	dev = platform_device_alloc(name, id);
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-	dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
-
-	ret = platform_device_add_resources(dev, res, resnum);
-	if (ret)
-		goto out_free;
-
-	dev->dev.platform_data = pdata;
-
-	ret = platform_device_add(dev);
-	if (ret)
-		goto out_free;
-
-	return dev;
-
-out_free:
-	platform_device_put(dev);
-	return ERR_PTR(ret);
-}
-
-struct platform_device *
-dbx500_add_platform_device_4k1irq(const char *name, int id,
-				  resource_size_t base,
-				  int irq, void *pdata)
-{
-	struct resource resources[] = {
-		[0] = {
-			.start	= base,
-			.end	= base + SZ_4K - 1,
-			.flags	= IORESOURCE_MEM,
-		},
-		[1] = {
-			.start	= irq,
-			.end	= irq,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	return dbx500_add_platform_device(name, id, pdata, resources,
-					  ARRAY_SIZE(resources));
-}
-
-static struct platform_device *
-dbx500_add_gpio(int id, resource_size_t addr, int irq,
+dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
 		struct nmk_gpio_platform_data *pdata)
 {
 	struct resource resources[] = {
@@ -118,13 +68,18 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq,
 		}
 	};
 
-	return platform_device_register_resndata(NULL, "gpio", id,
-				resources, ARRAY_SIZE(resources),
-				pdata, sizeof(*pdata));
+	return platform_device_register_resndata(
+		parent,
+		"gpio",
+		id,
+		resources,
+		ARRAY_SIZE(resources),
+		pdata,
+		sizeof(*pdata));
 }
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata)
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata)
 {
 	int first = 0;
 	int i;
@@ -134,6 +89,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq,
 		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
 		pdata->num_gpio = 32;
 
-		dbx500_add_gpio(i, base[i], irq, pdata);
+		dbx500_add_gpio(parent, i, base[i], irq, pdata);
 	}
 }

arch/arm/mach-ux500/devices-common.h

@@ -8,80 +8,89 @@
 #ifndef __DEVICES_COMMON_H
 #define __DEVICES_COMMON_H
 
-extern struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
-		       int irq, void *pdata, unsigned int periphid);
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sys_soc.h>
+#include <plat/i2c.h>
 
-extern struct platform_device *
-dbx500_add_platform_device_4k1irq(const char *name, int id,
-				  resource_size_t base,
-				  int irq, void *pdata);
+extern struct amba_device *
+dbx500_add_amba_device(struct device *parent, const char *name,
+		       resource_size_t base, int irq, void *pdata,
+		       unsigned int periphid);
 
 struct spi_master_cntlr;
 
 static inline struct amba_device *
-dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+dbx500_add_msp_spi(struct device *parent, const char *name,
+		   resource_size_t base, int irq,
 		   struct spi_master_cntlr *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, 0);
 }
 
 static inline struct amba_device *
-dbx500_add_spi(const char *name, resource_size_t base, int irq,
-	       struct spi_master_cntlr *pdata,
+dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct spi_master_cntlr *pdata,
 	       u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct mmci_platform_data;
 
 static inline struct amba_device *
-dbx500_add_sdi(const char *name, resource_size_t base, int irq,
-	       struct mmci_platform_data *pdata,
-	       u32 periphid)
+dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct mmci_platform_data *pdata, u32 periphid)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+	return dbx500_add_amba_device(parent, name, base, irq,
+				      pdata, periphid);
 }
 
 struct amba_pl011_data;
 
 static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq,
-		struct amba_pl011_data *pdata)
+dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
+		int irq, struct amba_pl011_data *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 struct nmk_i2c_controller;
 
 static inline struct platform_device *
-dbx500_add_i2c(int id, resource_size_t base, int irq,
-	       struct nmk_i2c_controller *pdata)
-{
-	return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
-						 pdata);
-}
-
-struct msp_i2s_platform_data;
-
-static inline struct platform_device *
-dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
-		   struct msp_i2s_platform_data *pdata)
+dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
+	       struct nmk_i2c_controller *data)
 {
-	return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq,
-						 pdata);
+	struct resource res[] = {
+		DEFINE_RES_MEM(base, SZ_4K),
+		DEFINE_RES_IRQ(irq),
+	};
+
+	struct platform_device_info pdevinfo = {
+		.parent = parent,
+		.name = "nmk-i2c",
+		.id = id,
+		.res = res,
+		.num_res = ARRAY_SIZE(res),
+		.data = data,
+		.size_data = sizeof(*data),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	return platform_device_register_full(&pdevinfo);
 }
 
 static inline struct amba_device *
-dbx500_add_rtc(resource_size_t base, int irq)
+dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
 {
-	return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+	return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
 }
 
 struct nmk_gpio_platform_data;
 
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
-		      struct nmk_gpio_platform_data *pdata);
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+		      int irq, struct nmk_gpio_platform_data *pdata);
 
 #endif

arch/arm/mach-ux500/devices-db5500.h

@@ -10,70 +10,90 @@
 
 #include "devices-common.h"
 
-#define db5500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+#define db5500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
 
-#define db5500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			   IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			   IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			   IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+			  IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+			  IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+			  IRQ_DB5500_MSP2, pdata)
 
-#define db5500_add_rtc() \
-	dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+#define db5500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
 
-#define db5500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U5500_USBOTG_BASE, \
+		      IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
 
-#define db5500_add_sdi0(pdata) \
-	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+#define db5500_add_sdi0(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
+		       IRQ_DB5500_SDMMC0, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi1(pdata) \
-	dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+#define db5500_add_sdi1(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
+		       IRQ_DB5500_SDMMC1, pdata,	\
 		       0x10480180)
-#define db5500_add_sdi2(pdata) \
-	dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+#define db5500_add_sdi2(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
+		       IRQ_DB5500_SDMMC2, pdata		\
 		       0x10480180)
-#define db5500_add_sdi3(pdata) \
-	dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+#define db5500_add_sdi3(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
+		       IRQ_DB5500_SDMMC3, pdata		\
 		       0x10480180)
-#define db5500_add_sdi4(pdata) \
-	dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+#define db5500_add_sdi4(parent, pdata) \
+	dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
+		       IRQ_DB5500_SDMMC4, pdata		\
 		       0x10480180)
 
 /* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+#define db5500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
+		       IRQ_DB5500_SPI0, pdata,		\
 		       0x10080023)
-#define db5500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+#define db5500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
+		       IRQ_DB5500_SPI1, pdata,		\
 		       0x10080023)
-#define db5500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+#define db5500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
+		       IRQ_DB5500_SPI2, pdata		\
 		       0x10080023)
-#define db5500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+#define db5500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
+		       IRQ_DB5500_SPI3, pdata		\
 		       0x10080023)
 
-#define db5500_add_uart0(plat) \
-	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(plat) \
-	dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(plat) \
-	dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(plat) \
-	dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+#define db5500_add_uart0(parent, plat) \
+	dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
+			IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(parent, plat) \
+	dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
+			IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(parent, plat) \
+	dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
+			IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(parent, plat) \
+	dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
+			IRQ_DB5500_UART3, plat)
 
 #endif

arch/arm/mach-ux500/devices-db8500.h

@@ -14,88 +14,114 @@ struct ske_keypad_platform_data;
 struct pl022_ssp_controller;
 
 static inline struct platform_device *
-db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+db8500_add_ske_keypad(struct device *parent,
+		      struct ske_keypad_platform_data *pdata,
+		      size_t size)
 {
-	return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
-						 U8500_SKE_BASE,
-						 IRQ_DB8500_KB, pdata);
+	struct resource resources[] = {
+		DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K),
+		DEFINE_RES_IRQ(IRQ_DB8500_KB),
+	};
+
+	return platform_device_register_resndata(parent, "nmk-ske-keypad", -1,
+						 resources, 2, pdata, size);
 }
 
 static inline struct amba_device *
-db8500_add_ssp(const char *name, resource_size_t base, int irq,
-	       struct pl022_ssp_controller *pdata)
+db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
+	       int irq, struct pl022_ssp_controller *pdata)
 {
-	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+	return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
 }
 
 
-#define db8500_add_i2c0(pdata) \
-	dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(pdata) \
-	dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(pdata) \
-	dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(pdata) \
-	dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(pdata) \
-	dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_i2s(pdata) \
-	dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(pdata) \
-	dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(pdata) \
-	dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(pdata) \
-	dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_msp0_spi(pdata) \
-	dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(pdata) \
-	dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(pdata) \
-	dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(pdata) \
-	dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc() \
-	dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(rx_cfg, tx_cfg) \
-	ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(pdata, pid) \
-	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(pdata, pid) \
-	dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(pdata, pid) \
-	dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(pdata, pid) \
-	dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(pdata, pid) \
-	dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(pdata, pid) \
-	dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(pdata) \
-	db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(pdata) \
-	db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(pdata) \
-	dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(pdata) \
-	dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(pdata) \
-	dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(pdata) \
-	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(pdata) \
-	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(pdata) \
-	dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(pdata) \
-	dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+#define db8500_add_i2c0(parent, pdata) \
+	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(parent, pdata) \
+	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(parent, pdata) \
+	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(parent, pdata) \
+	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(parent, pdata) \
+	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(parent, pdata) \
+	dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
+			   IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
+			   IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(parent, pdata) \
+	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
+			   IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc(parent) \
+	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
+	ux500_add_usb(parent, U8500_USBOTG_BASE, \
+		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
+#define db8500_add_sdi0(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
+		       IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
+		       IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
+		       IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
+		       IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
+		       IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(parent, pdata, pid) \
+	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
+		       IRQ_DB8500_SDMMC5, pdata, pid)
+
+#define db8500_add_ssp0(parent, pdata) \
+	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
+		       IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(parent, pdata) \
+	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
+		       IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(parent, pdata) \
+	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
+		       IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(parent, pdata) \
+	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
+		       IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(parent, pdata) \
+	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
+		       IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(parent, pdata) \
+	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
+		       IRQ_DB8500_SPI3, pdata, 0)
+
+#define db8500_add_uart0(parent, pdata) \
+	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
+			IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(parent, pdata) \
+	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
+			IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(parent, pdata) \
+	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
+			IRQ_DB8500_UART2, pdata)
 
 #endif

arch/arm/mach-ux500/dma-db5500.c

@@ -125,10 +125,11 @@ static struct platform_device dma40_device = {
 	.resource	= dma40_resources
 };
 
-void __init db5500_dma_init(void)
+void __init db5500_dma_init(struct device *parent)
 {
 	int ret;
 
+	dma40_device.dev.parent = parent;
 	ret = platform_device_register(&dma40_device);
 	if (ret)
 		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);

arch/arm/mach-ux500/include/mach/db8500-regs.h

@@ -161,4 +161,7 @@
 #define U8500_MODEM_BASE	0xe000000
 #define U8500_APE_BASE		0x6000000
 
+/* SoC identification number information */
+#define U8500_BB_UID_BASE      (U8500_BACKUPRAM1_BASE + 0xFC0)
+
 #endif

arch/arm/mach-ux500/include/mach/setup.h

@@ -18,17 +18,16 @@ void __init ux500_map_io(void);
 extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern void __init u5500_init_devices(void);
-extern void __init u8500_init_devices(void);
+extern struct device * __init u5500_init_devices(void);
+extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
-extern void __init u5500_sdi_init(void);
+extern void __init u5500_sdi_init(struct device *parent);
 
-extern void __init db5500_dma_init(void);
+extern void __init db5500_dma_init(struct device *parent);
 
-/* We re-use nomadik_timer for this platform */
-extern void nmdk_timer_init(void);
+extern struct device *ux500_soc_device_init(const char *soc_id);
 
 struct amba_device;
 extern void __init amba_add_devices(struct amba_device *devs[], int num);

arch/arm/mach-ux500/include/mach/usb.h

@@ -20,6 +20,6 @@ struct ux500_musb_board_data {
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg);
+void ux500_add_usb(struct device *parent, resource_size_t base,
+		   int irq, int *dma_rx_cfg, int *dma_tx_cfg);
 #endif

arch/arm/mach-ux500/localtimer.c

@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2008-2009 ST-Ericsson
- * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
- *
- * This file is heavily based on relaview platform, almost a copy.
- *
- * Copyright (C) 2002 ARM Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-
-#include <asm/irq.h>
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-	evt->irq = IRQ_LOCALTIMER;
-	twd_timer_setup(evt);
-	return 0;
-}

arch/arm/mach-ux500/timer.c

@@ -7,29 +7,52 @@
 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/of.h>
 
-#include <asm/localtimer.h>
+#include <asm/smp_twd.h>
 
 #include <plat/mtu.h>
 
 #include <mach/setup.h>
 #include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer,
+			      U5500_TWD_BASE, IRQ_LOCALTIMER);
+static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
+			      U8500_TWD_BASE, IRQ_LOCALTIMER);
+
+static void __init ux500_twd_init(void)
+{
+	struct twd_local_timer *twd_local_timer;
+	int err;
+
+	twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
+					   &u8500_twd_local_timer;
+
+	if (of_have_populated_dt())
+		twd_local_timer_of_register();
+	else {
+		err = twd_local_timer_register(twd_local_timer);
+		if (err)
+			pr_err("twd_local_timer_register failed %d\n", err);
+	}
+}
+#else
+#define ux500_twd_init()	do { } while(0)
+#endif
 
 static void __init ux500_timer_init(void)
 {
+	void __iomem *mtu_timer_base;
 	void __iomem *prcmu_timer_base;
 
 	if (cpu_is_u5500()) {
-#ifdef CONFIG_LOCAL_TIMERS
-		twd_base = __io_address(U5500_TWD_BASE);
-#endif
-		mtu_base = __io_address(U5500_MTU0_BASE);
+		mtu_timer_base = __io_address(U5500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
 	} else if (cpu_is_u8500()) {
-#ifdef CONFIG_LOCAL_TIMERS
-		twd_base = __io_address(U8500_TWD_BASE);
-#endif
-		mtu_base = __io_address(U8500_MTU0_BASE);
+		mtu_timer_base = __io_address(U8500_MTU0_BASE);
 		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
 	} else {
 		ux500_unknown_soc();
@@ -52,8 +75,9 @@ static void __init ux500_timer_init(void)
 	 *
 	 */
 
-	nmdk_timer_init();
+	nmdk_timer_init(mtu_timer_base);
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
+	ux500_twd_init();
 }
 
 static void ux500_timer_reset(void)

arch/arm/mach-ux500/usb.c

@@ -7,6 +7,7 @@
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
 #include <linux/dma-mapping.h>
+
 #include <plat/ste_dma40.h>
 #include <mach/hardware.h>
 #include <mach/usb.h>
@@ -140,8 +141,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
 		musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
 }
 
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
-	int *dma_tx_cfg)
+void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
+		   int *dma_rx_cfg, int *dma_tx_cfg)
 {
 	ux500_musb_device.resource[0].start = base;
 	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
@@ -151,5 +152,7 @@ void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
 	ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
 	ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
 
+	ux500_musb_device.dev.parent = parent;
+
 	platform_device_register(&ux500_musb_device);
 }

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -42,15 +42,26 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
 static void __init ct_ca9x4_map_io(void)
 {
 	iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
-#ifdef CONFIG_LOCAL_TIMERS
-	twd_base = ioremap(A9_MPCORE_TWD, SZ_32);
-#endif
 }
 
+#ifdef CONFIG_HAVE_ARM_TWD
+static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
+
+static void __init ca9x4_twd_init(void)
+{
+	int err = twd_local_timer_register(&twd_local_timer);
+	if (err)
+		pr_err("twd_local_timer_register failed %d\n", err);
+}
+#else
+#define ca9x4_twd_init()	do {} while(0)
+#endif
+
 static void __init ct_ca9x4_init_irq(void)
 {
 	gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
 		 ioremap(A9_MPCORE_GIC_CPU, SZ_256));
+	ca9x4_twd_init();
 }
 
 static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)

arch/arm/plat-nomadik/include/plat/mtu.h

@@ -1,9 +1,7 @@
 #ifndef __PLAT_MTU_H
 #define __PLAT_MTU_H
 
-/* should be set by the platform code */
-extern void __iomem *mtu_base;
-
+void nmdk_timer_init(void __iomem *base);
 void nmdk_clkevt_reset(void);
 void nmdk_clksrc_reset(void);
 

arch/arm/plat-nomadik/timer.c

@@ -20,12 +20,6 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 
-/*
- * Guaranteed runtime conversion range in seconds for
- * the clocksource and clockevent.
- */
-#define MTU_MIN_RANGE 4
-
 /*
  * The MTU device hosts four different counters, with 4 set of
  * registers. These are register names.
@@ -66,12 +60,11 @@
 #define MTU_PCELL2	0xff8
 #define MTU_PCELL3	0xffC
 
+static void __iomem *mtu_base;
 static bool clkevt_periodic;
 static u32 clk_prescale;
 static u32 nmdk_cycle;		/* write-once */
 
-void __iomem *mtu_base; /* Assigned by machine code */
-
 #ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
 /*
  * Override the global weak sched_clock symbol with this
@@ -103,7 +96,6 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
 void nmdk_clkevt_reset(void)
 {
 	if (clkevt_periodic) {
-
 		/* Timer: configure load and background-load, and fire it up */
 		writel(nmdk_cycle, mtu_base + MTU_LR(1));
 		writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
@@ -121,7 +113,6 @@ void nmdk_clkevt_reset(void)
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
 			     struct clock_event_device *dev)
 {
-
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		clkevt_periodic = true;
@@ -183,15 +174,16 @@ void nmdk_clksrc_reset(void)
 	       mtu_base + MTU_CR(0));
 }
 
-void __init nmdk_timer_init(void)
+void __init nmdk_timer_init(void __iomem *base)
 {
 	unsigned long rate;
 	struct clk *clk0;
 
+	mtu_base = base;
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
-
-	clk_enable(clk0);
+	BUG_ON(clk_prepare(clk0) < 0);
+	BUG_ON(clk_enable(clk0) < 0);
 
 	/*
 	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
@@ -224,17 +216,8 @@ void __init nmdk_timer_init(void)
 	setup_sched_clock(nomadik_read_sched_clock, 32, rate);
 #endif
 
-	/* Timer 1 is used for events */
-
-	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
-
-	nmdk_clkevt.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
-	nmdk_clkevt.min_delta_ns =
-		clockevent_delta2ns(0x00000002, &nmdk_clkevt);
-	nmdk_clkevt.cpumask	= cpumask_of(0);
-
-	/* Register irq and clockevents */
+	/* Timer 1 is used for events, register irq and clockevents */
 	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
-	clockevents_register_device(&nmdk_clkevt);
+	nmdk_clkevt.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);
 }

arch/arm/plat-versatile/Makefile

@@ -1,5 +1,4 @@
 obj-y	:= clock.o
-obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
 obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o
 obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
 obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o

arch/arm/plat-versatile/localtimer.c

@@ -1,53 +0,0 @@
-/*
- *  linux/arch/arm/plat-versatile/localtimer.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/clockchips.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/smp_twd.h>
-#include <asm/localtimer.h>
-#include <mach/irqs.h>
-
-const static struct of_device_id twd_of_match[] __initconst = {
-       { .compatible = "arm,cortex-a9-twd-timer",      },
-       { .compatible = "arm,cortex-a5-twd-timer",      },
-       { .compatible = "arm,arm11mp-twd-timer",        },
-       { },
-};
-
-/*
- * Setup the local clock events for a CPU.
- */
-int __cpuinit local_timer_setup(struct clock_event_device *evt)
-{
-#if defined(CONFIG_OF)
-	static int dt_node_probed;
-
-	/* Look for TWD node only once */
-	if (!dt_node_probed) {
-		struct device_node *node = of_find_matching_node(NULL,
-				twd_of_match);
-
-		if (node)
-			twd_base = of_iomap(node, 0);
-
-		dt_node_probed = 1;
-	}
-#endif
-	if (!twd_base)
-		return -ENXIO;
-
-	evt->irq = IRQ_LOCALTIMER;
-	twd_timer_setup(evt);
-	return 0;
-}

arch/x86/Kconfig

@@ -179,6 +179,9 @@ config ARCH_HAS_DEFAULT_IDLE
 config ARCH_HAS_CACHE_LINE_SIZE
 	def_bool y
 
+config ARCH_HAS_CPU_AUTOPROBE
+	def_bool y
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 

arch/x86/crypto/aesni-intel_glue.c

@@ -28,6 +28,7 @@
 #include <crypto/aes.h>
 #include <crypto/cryptd.h>
 #include <crypto/ctr.h>
+#include <asm/cpu_device_id.h>
 #include <asm/i387.h>
 #include <asm/aes.h>
 #include <crypto/scatterwalk.h>
@@ -1253,14 +1254,19 @@ static struct crypto_alg __rfc4106_alg = {
 };
 #endif
 
+
+static const struct x86_cpu_id aesni_cpu_id[] = {
+	X86_FEATURE_MATCH(X86_FEATURE_AES),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, aesni_cpu_id);
+
 static int __init aesni_init(void)
 {
 	int err;
 
-	if (!cpu_has_aes) {
-		printk(KERN_INFO "Intel AES-NI instructions are not detected.\n");
+	if (!x86_match_cpu(aesni_cpu_id))
 		return -ENODEV;
-	}
 
 	if ((err = crypto_fpu_init()))
 		goto fpu_err;

arch/x86/crypto/crc32c-intel.c

@@ -31,6 +31,7 @@
 #include <crypto/internal/hash.h>
 
 #include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
 
 #define CHKSUM_BLOCK_SIZE	1
 #define CHKSUM_DIGEST_SIZE	4
@@ -173,13 +174,17 @@ static struct shash_alg alg = {
 	}
 };
 
+static const struct x86_cpu_id crc32c_cpu_id[] = {
+	X86_FEATURE_MATCH(X86_FEATURE_XMM4_2),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, crc32c_cpu_id);
 
 static int __init crc32c_intel_mod_init(void)
 {
-	if (cpu_has_xmm4_2)
-		return crypto_register_shash(&alg);
-	else
+	if (!x86_match_cpu(crc32c_cpu_id))
 		return -ENODEV;
+	return crypto_register_shash(&alg);
 }
 
 static void __exit crc32c_intel_mod_fini(void)

arch/x86/crypto/ghash-clmulni-intel_glue.c

@@ -20,6 +20,7 @@
 #include <crypto/gf128mul.h>
 #include <crypto/internal/hash.h>
 #include <asm/i387.h>
+#include <asm/cpu_device_id.h>
 
 #define GHASH_BLOCK_SIZE	16
 #define GHASH_DIGEST_SIZE	16
@@ -294,15 +295,18 @@ static struct ahash_alg ghash_async_alg = {
 	},
 };
 
+static const struct x86_cpu_id pcmul_cpu_id[] = {
+	X86_FEATURE_MATCH(X86_FEATURE_PCLMULQDQ), /* Pickle-Mickle-Duck */
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, pcmul_cpu_id);
+
 static int __init ghash_pclmulqdqni_mod_init(void)
 {
 	int err;
 
-	if (!cpu_has_pclmulqdq) {
-		printk(KERN_INFO "Intel PCLMULQDQ-NI instructions are not"
-		       " detected.\n");
+	if (!x86_match_cpu(pcmul_cpu_id))
 		return -ENODEV;
-	}
 
 	err = crypto_register_shash(&ghash_alg);
 	if (err)

arch/x86/include/asm/cpu_device_id.h

@@ -0,0 +1,13 @@
+#ifndef _CPU_DEVICE_ID
+#define _CPU_DEVICE_ID 1
+
+/*
+ * Declare drivers belonging to specific x86 CPUs
+ * Similar in spirit to pci_device_id and related PCI functions
+ */
+
+#include <linux/mod_devicetable.h>
+
+extern const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match);
+
+#endif

arch/x86/include/asm/cpufeature.h

@@ -177,6 +177,7 @@
 #define X86_FEATURE_PLN		(7*32+ 5) /* Intel Power Limit Notification */
 #define X86_FEATURE_PTS		(7*32+ 6) /* Intel Package Thermal Status */
 #define X86_FEATURE_DTS		(7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_HW_PSTATE	(7*32+ 8) /* AMD HW-PState */
 
 /* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */

arch/x86/kernel/cpu/Makefile

@@ -16,6 +16,7 @@ obj-y			:= intel_cacheinfo.o scattered.o topology.o
 obj-y			+= proc.o capflags.o powerflags.o common.o
 obj-y			+= vmware.o hypervisor.o sched.o mshyperv.o
 obj-y			+= rdrand.o
+obj-y			+= match.o
 
 obj-$(CONFIG_X86_32)	+= bugs.o
 obj-$(CONFIG_X86_64)	+= bugs_64.o

arch/x86/kernel/cpu/match.c

@@ -0,0 +1,92 @@
+#include <asm/cpu_device_id.h>
+#include <asm/processor.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/**
+ * x86_match_cpu - match current CPU again an array of x86_cpu_ids
+ * @match: Pointer to array of x86_cpu_ids. Last entry terminated with
+ *         {}.
+ *
+ * Return the entry if the current CPU matches the entries in the
+ * passed x86_cpu_id match table. Otherwise NULL.  The match table
+ * contains vendor (X86_VENDOR_*), family, model and feature bits or
+ * respective wildcard entries.
+ *
+ * A typical table entry would be to match a specific CPU
+ * { X86_VENDOR_INTEL, 6, 0x12 }
+ * or to match a specific CPU feature
+ * { X86_FEATURE_MATCH(X86_FEATURE_FOOBAR) }
+ *
+ * Fields can be wildcarded with %X86_VENDOR_ANY, %X86_FAMILY_ANY,
+ * %X86_MODEL_ANY, %X86_FEATURE_ANY or 0 (except for vendor)
+ *
+ * Arrays used to match for this should also be declared using
+ * MODULE_DEVICE_TABLE(x86_cpu, ...)
+ *
+ * This always matches against the boot cpu, assuming models and features are
+ * consistent over all CPUs.
+ */
+const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
+{
+	const struct x86_cpu_id *m;
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	for (m = match; m->vendor | m->family | m->model | m->feature; m++) {
+		if (m->vendor != X86_VENDOR_ANY && c->x86_vendor != m->vendor)
+			continue;
+		if (m->family != X86_FAMILY_ANY && c->x86 != m->family)
+			continue;
+		if (m->model != X86_MODEL_ANY && c->x86_model != m->model)
+			continue;
+		if (m->feature != X86_FEATURE_ANY && !cpu_has(c, m->feature))
+			continue;
+		return m;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(x86_match_cpu);
+
+ssize_t arch_print_cpu_modalias(struct device *dev,
+				struct device_attribute *attr,
+				char *bufptr)
+{
+	int size = PAGE_SIZE;
+	int i, n;
+	char *buf = bufptr;
+
+	n = snprintf(buf, size, "x86cpu:vendor:%04X:family:%04X:"
+		     "model:%04X:feature:",
+		boot_cpu_data.x86_vendor,
+		boot_cpu_data.x86,
+		boot_cpu_data.x86_model);
+	size -= n;
+	buf += n;
+	size -= 2;
+	for (i = 0; i < NCAPINTS*32; i++) {
+		if (boot_cpu_has(i)) {
+			n = snprintf(buf, size, ",%04X", i);
+			if (n < 0) {
+				WARN(1, "x86 features overflow page\n");
+				break;
+			}
+			size -= n;
+			buf += n;
+		}
+	}
+	*buf++ = ',';
+	*buf++ = '\n';
+	return buf - bufptr;
+}
+
+int arch_cpu_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	char *buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (buf) {
+		arch_print_cpu_modalias(NULL, NULL, buf);
+		add_uevent_var(env, "MODALIAS=%s", buf);
+		kfree(buf);
+	}
+	return 0;
+}

arch/x86/kernel/cpu/scattered.c

@@ -40,6 +40,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 		{ X86_FEATURE_EPB,		CR_ECX, 3, 0x00000006, 0 },
 		{ X86_FEATURE_XSAVEOPT,		CR_EAX,	0, 0x0000000d, 1 },
 		{ X86_FEATURE_CPB,		CR_EDX, 9, 0x80000007, 0 },
+		{ X86_FEATURE_HW_PSTATE,	CR_EDX, 7, 0x80000007, 0 },
 		{ X86_FEATURE_NPT,		CR_EDX, 0, 0x8000000a, 0 },
 		{ X86_FEATURE_LBRV,		CR_EDX, 1, 0x8000000a, 0 },
 		{ X86_FEATURE_SVML,		CR_EDX, 2, 0x8000000a, 0 },

arch/x86/kernel/microcode_core.c

@@ -86,6 +86,7 @@
 
 #include <asm/microcode.h>
 #include <asm/processor.h>
+#include <asm/cpu_device_id.h>
 
 MODULE_DESCRIPTION("Microcode Update Driver");
 MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
@@ -504,6 +505,20 @@ static struct notifier_block __refdata mc_cpu_notifier = {
 	.notifier_call	= mc_cpu_callback,
 };
 
+#ifdef MODULE
+/* Autoload on Intel and AMD systems */
+static const struct x86_cpu_id microcode_id[] = {
+#ifdef CONFIG_MICROCODE_INTEL
+	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, },
+#endif
+#ifdef CONFIG_MICROCODE_AMD
+	{ X86_VENDOR_AMD, X86_FAMILY_ANY, X86_MODEL_ANY, },
+#endif
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, microcode_id);
+#endif
+
 static int __init microcode_init(void)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);

drivers/acpi/processor_driver.c

@@ -474,6 +474,7 @@ static __ref int acpi_processor_start(struct acpi_processor *pr)
 
 #ifdef CONFIG_CPU_FREQ
 	acpi_processor_ppc_has_changed(pr, 0);
+	acpi_processor_load_module(pr);
 #endif
 	acpi_processor_get_throttling_info(pr);
 	acpi_processor_get_limit_info(pr);

drivers/acpi/processor_perflib.c

@@ -240,6 +240,28 @@ void acpi_processor_ppc_exit(void)
 	acpi_processor_ppc_status &= ~PPC_REGISTERED;
 }
 
+/*
+ * Do a quick check if the systems looks like it should use ACPI
+ * cpufreq. We look at a _PCT method being available, but don't
+ * do a whole lot of sanity checks.
+ */
+void acpi_processor_load_module(struct acpi_processor *pr)
+{
+	static int requested;
+	acpi_status status = 0;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+
+	if (!arch_has_acpi_pdc() || requested)
+		return;
+	status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
+	if (!ACPI_FAILURE(status)) {
+		printk(KERN_INFO PREFIX "Requesting acpi_cpufreq\n");
+		request_module_nowait("acpi_cpufreq");
+		requested = 1;
+	}
+	kfree(buffer.pointer);
+}
+
 static int acpi_processor_get_performance_control(struct acpi_processor *pr)
 {
 	int result = 0;

drivers/base/Kconfig

@@ -176,6 +176,9 @@ config GENERIC_CPU_DEVICES
 	bool
 	default n
 
+config SOC_BUS
+	bool
+
 source "drivers/base/regmap/Kconfig"
 
 config DMA_SHARED_BUFFER

drivers/base/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_MODULES)	+= module.o
 endif
 obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o
 obj-$(CONFIG_REGMAP)	+= regmap/
+obj-$(CONFIG_SOC_BUS) += soc.o
 
 ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
 

drivers/base/bus.c

@@ -1194,13 +1194,15 @@ EXPORT_SYMBOL_GPL(subsys_interface_register);
 
 void subsys_interface_unregister(struct subsys_interface *sif)
 {
-	struct bus_type *subsys = sif->subsys;
+	struct bus_type *subsys;
 	struct subsys_dev_iter iter;
 	struct device *dev;
 
-	if (!sif)
+	if (!sif || !sif->subsys)
 		return;
 
+	subsys = sif->subsys;
+
 	mutex_lock(&subsys->p->mutex);
 	list_del_init(&sif->node);
 	if (sif->remove_dev) {

drivers/base/cpu.c

@@ -11,6 +11,7 @@
 #include <linux/device.h>
 #include <linux/node.h>
 #include <linux/gfp.h>
+#include <linux/slab.h>
 #include <linux/percpu.h>
 
 #include "base.h"
@@ -244,6 +245,9 @@ int __cpuinit register_cpu(struct cpu *cpu, int num)
 	cpu->dev.id = num;
 	cpu->dev.bus = &cpu_subsys;
 	cpu->dev.release = cpu_device_release;
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+	cpu->dev.bus->uevent = arch_cpu_uevent;
+#endif
 	error = device_register(&cpu->dev);
 	if (!error && cpu->hotpluggable)
 		register_cpu_control(cpu);
@@ -268,6 +272,10 @@ struct device *get_cpu_device(unsigned cpu)
 }
 EXPORT_SYMBOL_GPL(get_cpu_device);
 
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+static DEVICE_ATTR(modalias, 0444, arch_print_cpu_modalias, NULL);
+#endif
+
 static struct attribute *cpu_root_attrs[] = {
 #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
 	&dev_attr_probe.attr,
@@ -278,6 +286,9 @@ static struct attribute *cpu_root_attrs[] = {
 	&cpu_attrs[2].attr.attr,
 	&dev_attr_kernel_max.attr,
 	&dev_attr_offline.attr,
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+	&dev_attr_modalias.attr,
+#endif
 	NULL
 };
 

drivers/base/driver.c

@@ -153,34 +153,6 @@ int driver_add_kobj(struct device_driver *drv, struct kobject *kobj,
 }
 EXPORT_SYMBOL_GPL(driver_add_kobj);
 
-/**
- * get_driver - increment driver reference count.
- * @drv: driver.
- */
-struct device_driver *get_driver(struct device_driver *drv)
-{
-	if (drv) {
-		struct driver_private *priv;
-		struct kobject *kobj;
-
-		kobj = kobject_get(&drv->p->kobj);
-		priv = to_driver(kobj);
-		return priv->driver;
-	}
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(get_driver);
-
-/**
- * put_driver - decrement driver's refcount.
- * @drv: driver.
- */
-void put_driver(struct device_driver *drv)
-{
-	kobject_put(&drv->p->kobj);
-}
-EXPORT_SYMBOL_GPL(put_driver);
-
 static int driver_add_groups(struct device_driver *drv,
 			     const struct attribute_group **groups)
 {
@@ -234,7 +206,6 @@ int driver_register(struct device_driver *drv)
 
 	other = driver_find(drv->name, drv->bus);
 	if (other) {
-		put_driver(other);
 		printk(KERN_ERR "Error: Driver '%s' is already registered, "
 			"aborting...\n", drv->name);
 		return -EBUSY;
@@ -275,7 +246,9 @@ EXPORT_SYMBOL_GPL(driver_unregister);
  * Call kset_find_obj() to iterate over list of drivers on
  * a bus to find driver by name. Return driver if found.
  *
- * Note that kset_find_obj increments driver's reference count.
+ * This routine provides no locking to prevent the driver it returns
+ * from being unregistered or unloaded while the caller is using it.
+ * The caller is responsible for preventing this.
  */
 struct device_driver *driver_find(const char *name, struct bus_type *bus)
 {
@@ -283,6 +256,8 @@ struct device_driver *driver_find(const char *name, struct bus_type *bus)
 	struct driver_private *priv;
 
 	if (k) {
+		/* Drop reference added by kset_find_obj() */
+		kobject_put(k);
 		priv = to_driver(k);
 		return priv->driver;
 	}

drivers/base/soc.c

@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/idr.h>
+#include <linux/spinlock.h>
+#include <linux/sys_soc.h>
+#include <linux/err.h>
+
+static DEFINE_IDR(soc_ida);
+static DEFINE_SPINLOCK(soc_lock);
+
+static ssize_t soc_info_get(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf);
+
+struct soc_device {
+	struct device dev;
+	struct soc_device_attribute *attr;
+	int soc_dev_num;
+};
+
+static struct bus_type soc_bus_type = {
+	.name  = "soc",
+};
+
+static DEVICE_ATTR(machine,  S_IRUGO, soc_info_get,  NULL);
+static DEVICE_ATTR(family,   S_IRUGO, soc_info_get,  NULL);
+static DEVICE_ATTR(soc_id,   S_IRUGO, soc_info_get,  NULL);
+static DEVICE_ATTR(revision, S_IRUGO, soc_info_get,  NULL);
+
+struct device *soc_device_to_device(struct soc_device *soc_dev)
+{
+	return &soc_dev->dev;
+}
+
+static mode_t soc_attribute_mode(struct kobject *kobj,
+                                 struct attribute *attr,
+                                 int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+	if ((attr == &dev_attr_machine.attr)
+	    && (soc_dev->attr->machine != NULL))
+		return attr->mode;
+	if ((attr == &dev_attr_family.attr)
+	    && (soc_dev->attr->family != NULL))
+		return attr->mode;
+	if ((attr == &dev_attr_revision.attr)
+	    && (soc_dev->attr->revision != NULL))
+		return attr->mode;
+	if ((attr == &dev_attr_soc_id.attr)
+	    && (soc_dev->attr->soc_id != NULL))
+	        return attr->mode;
+
+	/* Unknown or unfilled attribute. */
+	return 0;
+}
+
+static ssize_t soc_info_get(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+	if (attr == &dev_attr_machine)
+		return sprintf(buf, "%s\n", soc_dev->attr->machine);
+	if (attr == &dev_attr_family)
+		return sprintf(buf, "%s\n", soc_dev->attr->family);
+	if (attr == &dev_attr_revision)
+		return sprintf(buf, "%s\n", soc_dev->attr->revision);
+	if (attr == &dev_attr_soc_id)
+		return sprintf(buf, "%s\n", soc_dev->attr->soc_id);
+
+	return -EINVAL;
+
+}
+
+static struct attribute *soc_attr[] = {
+	&dev_attr_machine.attr,
+	&dev_attr_family.attr,
+	&dev_attr_soc_id.attr,
+	&dev_attr_revision.attr,
+	NULL,
+};
+
+static const struct attribute_group soc_attr_group = {
+	.attrs = soc_attr,
+	.is_visible = soc_attribute_mode,
+};
+
+static const struct attribute_group *soc_attr_groups[] = {
+	&soc_attr_group,
+	NULL,
+};
+
+static void soc_release(struct device *dev)
+{
+	struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+	kfree(soc_dev);
+}
+
+struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr)
+{
+	struct soc_device *soc_dev;
+	int ret;
+
+	soc_dev = kzalloc(sizeof(*soc_dev), GFP_KERNEL);
+	if (!soc_dev) {
+	        ret = -ENOMEM;
+		goto out1;
+	}
+
+	/* Fetch a unique (reclaimable) SOC ID. */
+	do {
+		if (!ida_pre_get(&soc_ida, GFP_KERNEL)) {
+			ret = -ENOMEM;
+			goto out2;
+		}
+
+		spin_lock(&soc_lock);
+		ret = ida_get_new(&soc_ida, &soc_dev->soc_dev_num);
+		spin_unlock(&soc_lock);
+
+	} while (ret == -EAGAIN);
+
+	if (ret)
+	         goto out2;
+
+	soc_dev->attr = soc_dev_attr;
+	soc_dev->dev.bus = &soc_bus_type;
+	soc_dev->dev.groups = soc_attr_groups;
+	soc_dev->dev.release = soc_release;
+
+	dev_set_name(&soc_dev->dev, "soc%d", soc_dev->soc_dev_num);
+
+	ret = device_register(&soc_dev->dev);
+	if (ret)
+		goto out3;
+
+	return soc_dev;
+
+out3:
+	ida_remove(&soc_ida, soc_dev->soc_dev_num);
+out2:
+	kfree(soc_dev);
+out1:
+	return ERR_PTR(ret);
+}
+
+/* Ensure soc_dev->attr is freed prior to calling soc_device_unregister. */
+void soc_device_unregister(struct soc_device *soc_dev)
+{
+	ida_remove(&soc_ida, soc_dev->soc_dev_num);
+
+	device_unregister(&soc_dev->dev);
+}
+
+static int __init soc_bus_register(void)
+{
+	spin_lock_init(&soc_lock);
+
+	return bus_register(&soc_bus_type);
+}
+core_initcall(soc_bus_register);
+
+static void __exit soc_bus_unregister(void)
+{
+	ida_destroy(&soc_ida);
+
+	bus_unregister(&soc_bus_type);
+}
+module_exit(soc_bus_unregister);

drivers/cpufreq/cpufreq-nforce2.c

@@ -385,6 +385,14 @@ static struct cpufreq_driver nforce2_driver = {
 	.owner = THIS_MODULE,
 };
 
+#ifdef MODULE
+static DEFINE_PCI_DEVICE_TABLE(nforce2_ids) = {
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2 },
+	{}
+};
+MODULE_DEVICE_TABLE(pci, nforce2_ids);
+#endif
+
 /**
  * nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
  *

drivers/cpufreq/e_powersaver.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 
+#include <asm/cpu_device_id.h>
 #include <asm/msr.h>
 #include <asm/tsc.h>
 
@@ -437,18 +438,19 @@ static struct cpufreq_driver eps_driver = {
 	.attr		= eps_attr,
 };
 
+
+/* This driver will work only on Centaur C7 processors with
+ * Enhanced SpeedStep/PowerSaver registers */
+static const struct x86_cpu_id eps_cpu_id[] = {
+	{ X86_VENDOR_CENTAUR, 6, X86_MODEL_ANY, X86_FEATURE_EST },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, eps_cpu_id);
+
 static int __init eps_init(void)
 {
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	/* This driver will work only on Centaur C7 processors with
-	 * Enhanced SpeedStep/PowerSaver registers */
-	if (c->x86_vendor != X86_VENDOR_CENTAUR
-	    || c->x86 != 6 || c->x86_model < 10)
-		return -ENODEV;
-	if (!cpu_has(c, X86_FEATURE_EST))
+	if (!x86_match_cpu(eps_cpu_id) || boot_cpu_data.x86_model < 10)
 		return -ENODEV;
-
 	if (cpufreq_register_driver(&eps_driver))
 		return -EINVAL;
 	return 0;

drivers/cpufreq/elanfreq.c

@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/cpufreq.h>
 
+#include <asm/cpu_device_id.h>
 #include <asm/msr.h>
 #include <linux/timex.h>
 #include <linux/io.h>
@@ -277,17 +278,16 @@ static struct cpufreq_driver elanfreq_driver = {
 	.attr		= elanfreq_attr,
 };
 
+static const struct x86_cpu_id elan_id[] = {
+	{ X86_VENDOR_AMD, 4, 10, },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, elan_id);
 
 static int __init elanfreq_init(void)
 {
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	/* Test if we have the right hardware */
-	if ((c->x86_vendor != X86_VENDOR_AMD) ||
-		(c->x86 != 4) || (c->x86_model != 10)) {
-		printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
+	if (!x86_match_cpu(elan_id))
 		return -ENODEV;
-	}
 	return cpufreq_register_driver(&elanfreq_driver);
 }
 

drivers/cpufreq/gx-suspmod.c

@@ -82,6 +82,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 
+#include <asm/cpu_device_id.h>
 #include <asm/processor-cyrix.h>
 
 /* PCI config registers, all at F0 */
@@ -171,6 +172,7 @@ static struct pci_device_id gx_chipset_tbl[] __initdata = {
 	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
 	{ 0, },
 };
+MODULE_DEVICE_TABLE(pci, gx_chipset_tbl);
 
 static void gx_write_byte(int reg, int value)
 {
@@ -185,13 +187,6 @@ static __init struct pci_dev *gx_detect_chipset(void)
 {
 	struct pci_dev *gx_pci = NULL;
 
-	/* check if CPU is a MediaGX or a Geode. */
-	if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
-	    (boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
-		pr_debug("error: no MediaGX/Geode processor found!\n");
-		return NULL;
-	}
-
 	/* detect which companion chip is used */
 	for_each_pci_dev(gx_pci) {
 		if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)

drivers/cpufreq/longhaul.c

@@ -35,6 +35,7 @@
 #include <linux/acpi.h>
 
 #include <asm/msr.h>
+#include <asm/cpu_device_id.h>
 #include <acpi/processor.h>
 
 #include "longhaul.h"
@@ -951,12 +952,17 @@ static struct cpufreq_driver longhaul_driver = {
 	.attr	= longhaul_attr,
 };
 
+static const struct x86_cpu_id longhaul_id[] = {
+	{ X86_VENDOR_CENTAUR, 6 },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, longhaul_id);
 
 static int __init longhaul_init(void)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
 
-	if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
+	if (!x86_match_cpu(longhaul_id))
 		return -ENODEV;
 
 #ifdef CONFIG_SMP

drivers/cpufreq/longrun.c

@@ -14,6 +14,7 @@
 
 #include <asm/msr.h>
 #include <asm/processor.h>
+#include <asm/cpu_device_id.h>
 
 static struct cpufreq_driver	longrun_driver;
 
@@ -288,6 +289,12 @@ static struct cpufreq_driver longrun_driver = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct x86_cpu_id longrun_ids[] = {
+	{ X86_VENDOR_TRANSMETA, X86_FAMILY_ANY, X86_MODEL_ANY,
+	  X86_FEATURE_LONGRUN },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, longrun_ids);
 
 /**
  * longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
@@ -296,12 +303,8 @@ static struct cpufreq_driver longrun_driver = {
  */
 static int __init longrun_init(void)
 {
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	if (c->x86_vendor != X86_VENDOR_TRANSMETA ||
-	    !cpu_has(c, X86_FEATURE_LONGRUN))
+	if (!x86_match_cpu(longrun_ids))
 		return -ENODEV;
-
 	return cpufreq_register_driver(&longrun_driver);
 }
 

drivers/cpufreq/p4-clockmod.c

@@ -31,6 +31,7 @@
 #include <asm/processor.h>
 #include <asm/msr.h>
 #include <asm/timer.h>
+#include <asm/cpu_device_id.h>
 
 #include "speedstep-lib.h"
 
@@ -289,21 +290,25 @@ static struct cpufreq_driver p4clockmod_driver = {
 	.attr		= p4clockmod_attr,
 };
 
+static const struct x86_cpu_id cpufreq_p4_id[] = {
+	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC },
+	{}
+};
+
+/*
+ * Intentionally no MODULE_DEVICE_TABLE here: this driver should not
+ * be auto loaded.  Please don't add one.
+ */
 
 static int __init cpufreq_p4_init(void)
 {
-	struct cpuinfo_x86 *c = &cpu_data(0);
 	int ret;
 
 	/*
 	 * THERM_CONTROL is architectural for IA32 now, so
 	 * we can rely on the capability checks
 	 */
-	if (c->x86_vendor != X86_VENDOR_INTEL)
-		return -ENODEV;
-
-	if (!test_cpu_cap(c, X86_FEATURE_ACPI) ||
-				!test_cpu_cap(c, X86_FEATURE_ACC))
+	if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI))
 		return -ENODEV;
 
 	ret = cpufreq_register_driver(&p4clockmod_driver);

drivers/cpufreq/powernow-k6.c

@@ -16,6 +16,7 @@
 #include <linux/timex.h>
 #include <linux/io.h>
 
+#include <asm/cpu_device_id.h>
 #include <asm/msr.h>
 
 #define POWERNOW_IOPORT 0xfff0          /* it doesn't matter where, as long
@@ -210,6 +211,12 @@ static struct cpufreq_driver powernow_k6_driver = {
 	.attr		= powernow_k6_attr,
 };
 
+static const struct x86_cpu_id powernow_k6_ids[] = {
+	{ X86_VENDOR_AMD, 5, 12 },
+	{ X86_VENDOR_AMD, 5, 13 },
+	{}
+};
+
 
 /**
  * powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
@@ -220,10 +227,7 @@ static struct cpufreq_driver powernow_k6_driver = {
  */
 static int __init powernow_k6_init(void)
 {
-	struct cpuinfo_x86 *c = &cpu_data(0);
-
-	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
-		((c->x86_model != 12) && (c->x86_model != 13)))
+	if (!x86_match_cpu(powernow_k6_ids))
 		return -ENODEV;
 
 	if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {

drivers/cpufreq/powernow-k7.c

@@ -28,6 +28,7 @@
 #include <asm/timer.h>		/* Needed for recalibrate_cpu_khz() */
 #include <asm/msr.h>
 #include <asm/system.h>
+#include <asm/cpu_device_id.h>
 
 #ifdef CONFIG_X86_POWERNOW_K7_ACPI
 #include <linux/acpi.h>
@@ -110,18 +111,19 @@ static int check_fsb(unsigned int fsbspeed)
 	return delta < 5;
 }
 
+static const struct x86_cpu_id powernow_k7_cpuids[] = {
+	{ X86_VENDOR_AMD, 7, },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids);
+
 static int check_powernow(void)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
 	unsigned int maxei, eax, ebx, ecx, edx;
 
-	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) {
-#ifdef MODULE
-		printk(KERN_INFO PFX "This module only works with "
-				"AMD K7 CPUs\n");
-#endif
+	if (!x86_match_cpu(powernow_k7_cpuids))
 		return 0;
-	}
 
 	/* Get maximum capabilities */
 	maxei = cpuid_eax(0x80000000);

drivers/cpufreq/powernow-k8.c

@@ -40,6 +40,7 @@
 #include <linux/delay.h>
 
 #include <asm/msr.h>
+#include <asm/cpu_device_id.h>
 
 #include <linux/acpi.h>
 #include <linux/mutex.h>
@@ -520,6 +521,15 @@ static int core_voltage_post_transition(struct powernow_k8_data *data,
 	return 0;
 }
 
+static const struct x86_cpu_id powernow_k8_ids[] = {
+	/* IO based frequency switching */
+	{ X86_VENDOR_AMD, 0xf },
+	/* MSR based frequency switching supported */
+	X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k8_ids);
+
 static void check_supported_cpu(void *_rc)
 {
 	u32 eax, ebx, ecx, edx;
@@ -527,13 +537,7 @@ static void check_supported_cpu(void *_rc)
 
 	*rc = -ENODEV;
 
-	if (__this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_AMD)
-		return;
-
 	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
-	if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) &&
-	    ((eax & CPUID_XFAM) < CPUID_XFAM_10H))
-		return;
 
 	if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
 		if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
@@ -1553,6 +1557,9 @@ static int __cpuinit powernowk8_init(void)
 	unsigned int i, supported_cpus = 0, cpu;
 	int rv;
 
+	if (!x86_match_cpu(powernow_k8_ids))
+		return -ENODEV;
+
 	for_each_online_cpu(i) {
 		int rc;
 		smp_call_function_single(i, check_supported_cpu, &rc, 1);

drivers/cpufreq/sc520_freq.c

@@ -22,6 +22,7 @@
 #include <linux/timex.h>
 #include <linux/io.h>
 
+#include <asm/cpu_device_id.h>
 #include <asm/msr.h>
 
 #define MMCR_BASE	0xfffef000	/* The default base address */
@@ -150,18 +151,19 @@ static struct cpufreq_driver sc520_freq_driver = {
 	.attr	= sc520_freq_attr,
 };
 
+static const struct x86_cpu_id sc520_ids[] = {
+	{ X86_VENDOR_AMD, 4, 9 },
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, sc520_ids);
 
 static int __init sc520_freq_init(void)
 {
-	struct cpuinfo_x86 *c = &cpu_data(0);
 	int err;
 
-	/* Test if we have the right hardware */
-	if (c->x86_vendor != X86_VENDOR_AMD ||
-	    c->x86 != 4 || c->x86_model != 9) {
-		pr_debug("no Elan SC520 processor found!\n");
+	if (!x86_match_cpu(sc520_ids))
 		return -ENODEV;
-	}
+
 	cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
 	if (!cpuctl) {
 		printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");

drivers/cpufreq/speedstep-centrino.c

@@ -25,6 +25,7 @@
 #include <asm/msr.h>
 #include <asm/processor.h>
 #include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
 
 #define PFX		"speedstep-centrino: "
 #define MAINTAINER	"cpufreq@vger.kernel.org"
@@ -595,6 +596,24 @@ static struct cpufreq_driver centrino_driver = {
 	.owner		= THIS_MODULE,
 };
 
+/*
+ * This doesn't replace the detailed checks above because
+ * the generic CPU IDs don't have a way to match for steppings
+ * or ASCII model IDs.
+ */
+static const struct x86_cpu_id centrino_ids[] = {
+	{ X86_VENDOR_INTEL, 6, 9, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 15, 3, X86_FEATURE_EST },
+	{ X86_VENDOR_INTEL, 15, 4, X86_FEATURE_EST },
+	{}
+};
+#if 0
+/* Autoload or not? Do not for now. */
+MODULE_DEVICE_TABLE(x86cpu, centrino_ids);
+#endif
 
 /**
  * centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
@@ -612,11 +631,8 @@ static struct cpufreq_driver centrino_driver = {
  */
 static int __init centrino_init(void)
 {
-	struct cpuinfo_x86 *cpu = &cpu_data(0);
-
-	if (!cpu_has(cpu, X86_FEATURE_EST))
+	if (!x86_match_cpu(centrino_ids))
 		return -ENODEV;
-
 	return cpufreq_register_driver(&centrino_driver);
 }
 

drivers/cpufreq/speedstep-ich.c

@@ -25,6 +25,8 @@
 #include <linux/pci.h>
 #include <linux/sched.h>
 
+#include <asm/cpu_device_id.h>
+
 #include "speedstep-lib.h"
 
 
@@ -388,6 +390,16 @@ static struct cpufreq_driver speedstep_driver = {
 	.attr	= speedstep_attr,
 };
 
+static const struct x86_cpu_id ss_smi_ids[] = {
+	{ X86_VENDOR_INTEL, 6, 0xb, },
+	{ X86_VENDOR_INTEL, 6, 0x8, },
+	{ X86_VENDOR_INTEL, 15, 2 },
+	{}
+};
+#if 0
+/* Autoload or not? Do not for now. */
+MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
+#endif
 
 /**
  * speedstep_init - initializes the SpeedStep CPUFreq driver
@@ -398,6 +410,9 @@ static struct cpufreq_driver speedstep_driver = {
  */
 static int __init speedstep_init(void)
 {
+	if (!x86_match_cpu(ss_smi_ids))
+		return -ENODEV;
+
 	/* detect processor */
 	speedstep_processor = speedstep_detect_processor();
 	if (!speedstep_processor) {

drivers/cpufreq/speedstep-lib.c

@@ -249,6 +249,7 @@ EXPORT_SYMBOL_GPL(speedstep_get_frequency);
  *                 DETECT SPEEDSTEP-CAPABLE PROCESSOR                *
  *********************************************************************/
 
+/* Keep in sync with the x86_cpu_id tables in the different modules */
 unsigned int speedstep_detect_processor(void)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);

drivers/cpufreq/speedstep-smi.c

@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <asm/ist.h>
+#include <asm/cpu_device_id.h>
 
 #include "speedstep-lib.h"
 
@@ -379,6 +380,17 @@ static struct cpufreq_driver speedstep_driver = {
 	.attr		= speedstep_attr,
 };
 
+static const struct x86_cpu_id ss_smi_ids[] = {
+	{ X86_VENDOR_INTEL, 6, 0xb, },
+	{ X86_VENDOR_INTEL, 6, 0x8, },
+	{ X86_VENDOR_INTEL, 15, 2 },
+	{}
+};
+#if 0
+/* Not auto loaded currently */
+MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
+#endif
+
 /**
  * speedstep_init - initializes the SpeedStep CPUFreq driver
  *
@@ -388,6 +400,9 @@ static struct cpufreq_driver speedstep_driver = {
  */
 static int __init speedstep_init(void)
 {
+	if (!x86_match_cpu(ss_smi_ids))
+		return -ENODEV;
+
 	speedstep_processor = speedstep_detect_processor();
 
 	switch (speedstep_processor) {