ASoC: wm0010: Use DMA-safe memory for SPI transfers

We should be allocating our buffers for the SPI transfers
from the DMA zone.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

sound/soc/codecs/wm0010.c

@@ -420,7 +420,7 @@ static int wm0010_firmware_load(const char *name, struct snd_soc_codec *codec)
 		xfer->codec = codec;
 		list_add_tail(&xfer->list, &xfer_list);
 
-		out = kzalloc(len, GFP_KERNEL);
+		out = kzalloc(len, GFP_KERNEL | GFP_DMA);
 		if (!out) {
 			dev_err(codec->dev,
 				"Failed to allocate RX buffer\n");
@@ -429,7 +429,7 @@ static int wm0010_firmware_load(const char *name, struct snd_soc_codec *codec)
 		}
 		xfer->t.rx_buf = out;
 
-		img = kzalloc(len, GFP_KERNEL);
+		img = kzalloc(len, GFP_KERNEL | GFP_DMA);
 		if (!img) {
 			dev_err(codec->dev,
 				"Failed to allocate image buffer\n");
@@ -523,14 +523,14 @@ static int wm0010_stage2_load(struct snd_soc_codec *codec)
 	dev_dbg(codec->dev, "Downloading %zu byte stage 2 loader\n", fw->size);
 
 	/* Copy to local buffer first as vmalloc causes problems for dma */
-	img = kzalloc(fw->size, GFP_KERNEL);
+	img = kzalloc(fw->size, GFP_KERNEL | GFP_DMA);
 	if (!img) {
 		dev_err(codec->dev, "Failed to allocate image buffer\n");
 		ret = -ENOMEM;
 		goto abort2;
 	}
 
-	out = kzalloc(fw->size, GFP_KERNEL);
+	out = kzalloc(fw->size, GFP_KERNEL | GFP_DMA);
 	if (!out) {
 		dev_err(codec->dev, "Failed to allocate output buffer\n");
 		ret = -ENOMEM;
@@ -670,14 +670,14 @@ static int wm0010_boot(struct snd_soc_codec *codec)
 
 		ret = -ENOMEM;
 		len = pll_rec.length + 8;
-		out = kzalloc(len, GFP_KERNEL);
+		out = kzalloc(len, GFP_KERNEL | GFP_DMA);
 		if (!out) {
 			dev_err(codec->dev,
 				"Failed to allocate RX buffer\n");
 			goto abort;
 		}
 
-		img_swap = kzalloc(len, GFP_KERNEL);
+		img_swap = kzalloc(len, GFP_KERNEL | GFP_DMA);
 		if (!img_swap) {
 			dev_err(codec->dev,
 				"Failed to allocate image buffer\n");