ARM: OMAP3+: voltage: remove unused volt_setup_time parameter

This is no longer needed as the ramp times are calculated from
voltage deltas + slew rates.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>

arch/arm/mach-omap2/omap_twl.c

@@ -141,7 +141,6 @@ static u8 twl6030_uv_to_vsel(unsigned long uv)
 static struct omap_voltdm_pmic omap3_mpu_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12500,
-	.volt_setup_time	= 0xfff,
 	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
@@ -158,7 +157,6 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = {
 static struct omap_voltdm_pmic omap3_core_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12500,
-	.volt_setup_time        = 0xfff,
 	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
@@ -175,7 +173,6 @@ static struct omap_voltdm_pmic omap3_core_pmic = {
 static struct omap_voltdm_pmic omap4_mpu_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
@@ -193,7 +190,6 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = {
 static struct omap_voltdm_pmic omap4_iva_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
@@ -211,7 +207,6 @@ static struct omap_voltdm_pmic omap4_iva_pmic = {
 static struct omap_voltdm_pmic omap4_core_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,

arch/arm/mach-omap2/voltage.h

@@ -129,7 +129,6 @@ struct voltagedomain {
 struct omap_voltdm_pmic {
 	int slew_rate;
 	int step_size;
-	u16 volt_setup_time;
 	u16 i2c_slave_addr;
 	u16 volt_reg_addr;
 	u16 cmd_reg_addr;