Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC low-priority fixes from Olof Johansson:
 "This branch contains a handful of fixes for various platforms that
  weren't serious enough to be included in late 3.11-rc releases.  Most
  of them are for minor cleanups and cosmetic fixes.

  There's also a bit of code removal here, one board file removal for
  clps711x, and removal of some legacy device creation on OMAP2+"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
  ARM: OMAP2: use 'int' instead of 'unsigned' for variable 'gpmc_irq_start'
  ARM: OMAP2: remove useless variable 'ret'
  ARM: OMAP: dma: fix error return code in omap_system_dma_probe()
  ARM: OMAP2+: fix wrong address when loading PRM_FRAC_INCREMENTOR_DENUMERATOR_RELOAD
  ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards
  ARM: OMAP2: Use a consistent AM33XX SoC option description
  ARM: OMAP2+: Remove legacy device creation for McPDM and DMIC
  ARM: clps711x: edb7211: Remove extra iotable_init() call
  ARM: clps711x: autcpu12: Remove incorrect config checking
  ARM: clps711x: Drop fortunet board support
  ARM: clps711x: Remove the special name for the syscon driver
  ARM: dts: Fix memory node in skeleton64.dtsi
  ARM: Keystone: Convert device tree file to use IRQ defines
  ARM: keystone: use #include to include skeleton.dtsi
  ARM: keystone: Drop the un-necessary dsb from keystone_cpu_smc()
  ARM: Keystone: No need to preserve r12 across smc call
  ARM: keystone: remove redundant smp_init_cpus definition
  ARM: keystone: drop useless HAVE_SCHED_CLOCK
  ARM: dove: fix missing __init section of dove_mpp_gpio_mode
  ARM: shmobile: armadillo800eva-reference: fix compiler warning
  ...

arch/arm/boot/compressed/head-shmobile.S

@@ -55,12 +55,47 @@ __tmp_stack:
 __continue:
 #endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
 
-	/* Set board ID necessary for boot */
-	ldr	r7, 1f				@ Set machine type register
-	mov	r8, #0				@ pass null pointer as atag
+	adr	r0, dtb_info
+	ldmia	r0, {r1, r3, r4, r5, r7}
+
+	sub	r0, r0, r1		@ calculate the delta offset
+	add	r5, r5, r0		@ _edata
+
+	ldr	lr, [r5, #0]		@ check if valid DTB is present
+	cmp	lr, r3
+	bne	0f
+
+	add	r9, r7, #31		@ rounded up to a multiple
+	bic	r9, r9, #31		@ ... of 32 bytes
+
+	add	r6, r9, r5		@ copy from _edata
+	add	r9, r9, r4		@ to MEMORY_START
+
+1:	ldmdb	r6!, {r0 - r3, r10 - r12, lr}
+	cmp	r6, r5
+	stmdb	r9!, {r0 - r3, r10 - r12, lr}
+	bhi	1b
+
+	/* Success: Zero board ID, pointer to start of memory for atag/dtb */
+	mov	r7, #0
+	mov	r8, r4
 	b	2f
 
-1 :	.long MACH_TYPE
+	.align	2
+dtb_info:
+	.word	dtb_info
+#ifndef __ARMEB__
+	.word	0xedfe0dd0		@ sig is 0xd00dfeed big endian
+#else
+	.word	0xd00dfeed
+#endif
+	.word	MEMORY_START
+	.word	_edata
+	.word	0x4000			@ maximum DTB size
+0:
+	/* Failure: Zero board ID, NULL atag/dtb */
+	mov 	r7, #0
+	mov	r8, #0			@ pass null pointer as atag
 2 :
 
 #endif /* CONFIG_ZBOOT_ROM */

arch/arm/boot/dts/keystone.dts

@@ -7,7 +7,9 @@
  */
 
 /dts-v1/;
-/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
 
 / {
 	model = "Texas Instruments Keystone 2 SoC";
@@ -67,18 +69,23 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0x308>;
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
-		interrupts = <0 20 0xf01>,
-			     <0 21 0xf01>,
-			     <0 22 0xf01>,
-			     <0 23 0xf01>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
 	};
 
 	soc {
@@ -100,7 +107,7 @@
 			reg-io-width = <4>;
 			reg = <0x02530c00 0x100>;
 			clock-frequency = <133120000>;
-			interrupts = <0 277 0xf01>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		uart1:	serial@02531000 {
@@ -110,7 +117,7 @@
 			reg-io-width = <4>;
 			reg = <0x02531000 0x100>;
 			clock-frequency = <133120000>;
-			interrupts = <0 280 0xf01>;
+			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
 		};
 
 	};

arch/arm/boot/dts/skeleton64.dtsi

@@ -9,5 +9,5 @@
 	#size-cells = <2>;
 	chosen { };
 	aliases { };
-	memory { device_type = "memory"; reg = <0 0>; };
+	memory { device_type = "memory"; reg = <0 0 0 0>; };
 };

arch/arm/mach-clps711x/Kconfig

@@ -33,9 +33,6 @@ config ARCH_P720T
 	  Say Y here if you intend to run this kernel on the ARM Prospector
 	  720T.
 
-config ARCH_FORTUNET
-	bool "FORTUNET"
-
 config EP72XX_ROM_BOOT
 	bool "EP721x/EP731x ROM boot"
 	help

arch/arm/mach-clps711x/Makefile

@@ -10,5 +10,4 @@ obj-$(CONFIG_ARCH_AUTCPU12)	+= board-autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712)	+= board-cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312)	+= board-clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)	+= board-edb7211.o
-obj-$(CONFIG_ARCH_FORTUNET)	+= board-fortunet.o
 obj-$(CONFIG_ARCH_P720T)	+= board-p720t.o

arch/arm/mach-clps711x/board-autcpu12.c

@@ -259,11 +259,7 @@ static void __init autcpu12_init(void)
 static void __init autcpu12_init_late(void)
 {
 	gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios));
-
-	if (IS_ENABLED(MTD_NAND_GPIO) && IS_ENABLED(GPIO_GENERIC_PLATFORM)) {
-		/* We are need both drivers to handle NAND */
-		platform_device_register(&autcpu12_nand_pdev);
-	}
+	platform_device_register(&autcpu12_nand_pdev);
 }
 
 MACHINE_START(AUTCPU12, "autronix autcpu12")

arch/arm/mach-clps711x/board-edb7211.c

@@ -126,21 +126,6 @@ static struct gpio edb7211_gpios[] __initconst = {
 	{ EDB7211_LCDBL,	GPIOF_OUT_INIT_LOW,	"LCD BACKLIGHT" },
 };
 
-static struct map_desc edb7211_io_desc[] __initdata = {
-	{	/* Memory-mapped extra keyboard row */
-		.virtual	= IO_ADDRESS(EDB7211_EXTKBD_BASE),
-		.pfn		= __phys_to_pfn(EDB7211_EXTKBD_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE,
-	},
-};
-
-void __init edb7211_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc));
-}
-
 /* Reserve screen memory region at the start of main system memory. */
 static void __init edb7211_reserve(void)
 {
@@ -195,7 +180,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.nr_irqs	= CLPS711X_NR_IRQS,
 	.fixup		= fixup_edb7211,
 	.reserve	= edb7211_reserve,
-	.map_io		= edb7211_map_io,
+	.map_io		= clps711x_map_io,
 	.init_early	= clps711x_init_early,
 	.init_irq	= clps711x_init_irq,
 	.init_time	= clps711x_timer_init,

arch/arm/mach-clps711x/board-fortunet.c

@@ -1,85 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/fortunet.c
- *
- *  Derived from linux/arch/arm/mach-integrator/arch.c
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include <asm/memory.h>
-
-#include "common.h"
-
-struct meminfo memmap = {
-	.nr_banks	= 1,
-	.bank		= {
-		{
-			.start	= 0xC0000000,
-			.size	= 0x01000000,
-		},
-	},
-};
-
-typedef struct tag_IMAGE_PARAMS
-{
-	int	ramdisk_ok;
-	int	ramdisk_address;
-	int	ramdisk_size;
-	int	ram_size;
-	int	extra_param_type;
-	int	extra_param_ptr;
-	int	command_line;
-} IMAGE_PARAMS;
-
-#define IMAGE_PARAMS_PHYS	0xC01F0000
-
-static void __init
-fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS);
-	*cmdline = phys_to_virt(ip->command_line);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if(ip->ramdisk_ok)
-	{
-		initrd_start = __phys_to_virt(ip->ramdisk_address);
-		initrd_end = initrd_start + ip->ramdisk_size;
-	}
-#endif
-	memmap.bank[0].size = ip->ram_size;
-	*mi = memmap;
-}
-
-MACHINE_START(FORTUNET, "ARM-FortuNet")
-	/* Maintainer: FortuNet Inc. */
-	.nr_irqs	= CLPS711X_NR_IRQS,
-	.fixup		= fortunet_fixup,
-	.map_io		= clps711x_map_io,
-	.init_early	= clps711x_init_early,
-	.init_irq	= clps711x_init_irq,
-	.init_time	= clps711x_timer_init,
-	.handle_irq	= clps711x_handle_irq,
-	.restart	= clps711x_restart,
-MACHINE_END

arch/arm/mach-clps711x/devices.c

@@ -57,7 +57,7 @@ static void __init clps711x_add_syscon(void)
 	unsigned i;
 
 	for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++)
-		platform_device_register_simple("clps711x-syscon", i + 1,
+		platform_device_register_simple("syscon", i + 1,
 						&clps711x_syscon_res[i], 1);
 }
 

arch/arm/mach-dove/mpp.c

@@ -47,7 +47,7 @@ static const struct dove_mpp_grp dove_mpp_grp[] = {
 
 /* Enable gpio for a range of pins. mode should be a combination of
    GPIO_OUTPUT_OK | GPIO_INPUT_OK */
-static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
+static void __init dove_mpp_gpio_mode(int start, int end, int gpio_mode)
 {
 	int i;
 

arch/arm/mach-keystone/Kconfig

@@ -7,7 +7,6 @@ config ARCH_KEYSTONE
 	select HAVE_SMP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_ERRATA_798181 if SMP
 	help

arch/arm/mach-keystone/platsmp.c

@@ -38,6 +38,5 @@ static int keystone_smp_boot_secondary(unsigned int cpu,
 }
 
 struct smp_operations keystone_smp_ops __initdata = {
-	.smp_init_cpus		= arm_dt_init_cpu_maps,
 	.smp_boot_secondary	= keystone_smp_boot_secondary,
 };

arch/arm/mach-keystone/smc.S

@@ -22,8 +22,7 @@
  * Return: Non zero value on failure
  */
 ENTRY(keystone_cpu_smc)
-	stmfd   sp!, {r4-r12, lr}
+	stmfd   sp!, {r4-r11, lr}
 	smc	#0
-	dsb
-	ldmfd   sp!, {r4-r12, pc}
+	ldmfd   sp!, {r4-r11, pc}
 ENDPROC(keystone_cpu_smc)

arch/arm/mach-omap2/Kconfig

@@ -65,7 +65,7 @@ config SOC_OMAP5
 	select ARM_ERRATA_798181 if SMP
 
 config SOC_AM33XX
-	bool "AM33XX support"
+	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM

arch/arm/mach-omap2/am33xx-restart.c

@@ -24,8 +24,8 @@ void am33xx_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* TODO: Handle mode and cmd if necessary */
 
-	am33xx_prm_rmw_reg_bits(AM33XX_GLOBAL_WARM_SW_RST_MASK,
-				AM33XX_GLOBAL_WARM_SW_RST_MASK,
+	am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
+				AM33XX_RST_GLOBAL_WARM_SW_MASK,
 				AM33XX_PRM_DEVICE_MOD,
 				AM33XX_PRM_RSTCTRL_OFFSET);
 

arch/arm/mach-omap2/board-am3517crane.c

@@ -110,8 +110,6 @@ static void __init am3517_crane_i2c_init(void)
 
 static void __init am3517_crane_init(void)
 {
-	int ret;
-
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);

arch/arm/mach-omap2/devices.c

@@ -327,44 +327,6 @@ static void omap_init_audio(void)
 static inline void omap_init_audio(void) {}
 #endif
 
-#if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
-		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
-
-static void __init omap_init_mcpdm(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("mcpdm");
-	if (!oh)
-		return;
-
-	pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n");
-}
-#else
-static inline void omap_init_mcpdm(void) {}
-#endif
-
-#if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
-		defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
-
-static void __init omap_init_dmic(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-
-	oh = omap_hwmod_lookup("dmic");
-	if (!oh)
-		return;
-
-	pdev = omap_device_build("omap-dmic", -1, oh, NULL, 0);
-	WARN(IS_ERR(pdev), "Can't build omap_device for omap-dmic.\n");
-}
-#else
-static inline void omap_init_dmic(void) {}
-#endif
-
 #if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
 		defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
 
@@ -565,8 +527,6 @@ static int __init omap2_init_devices(void)
 	omap_init_mbox();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
-		omap_init_dmic();
-		omap_init_mcpdm();
 		omap_init_mcspi();
 		omap_init_sham();
 		omap_init_aes();

arch/arm/mach-omap2/gpmc.c

@@ -149,7 +149,7 @@ struct omap3_gpmc_regs {
 
 static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
 static struct irq_chip gpmc_irq_chip;
-static unsigned gpmc_irq_start;
+static int gpmc_irq_start;
 
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];

arch/arm/mach-omap2/timer.c

@@ -537,7 +537,7 @@ static void __init realtime_counter_init(void)
 	reg |= num;
 	__raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET);
 
-	reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) &
+	reg = __raw_readl(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) &
 			NUMERATOR_DENUMERATOR_MASK;
 	reg |= den;
 	__raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET);

arch/arm/mach-shmobile/board-armadillo800eva-reference.c

@@ -190,10 +190,10 @@ static void __init eva_init(void)
 }
 
 #define RESCNT2 IOMEM(0xe6188020)
-static void eva_restart(char mode, const char *cmd)
+static void eva_restart(enum reboot_mode mode, const char *cmd)
 {
 	/* Do soft power on reset */
-	writel((1 << 31), RESCNT2);
+	writel(1 << 31, RESCNT2);
 }
 
 static const char *eva_boards_compat_dt[] __initdata = {

arch/arm/mach-shmobile/clock-r8a7740.c

@@ -596,7 +596,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e6bd0000.mmcif",         &mstp_clks[MSTP312]),
 	CLKDEV_DEV_ID("r8a7740-gether",		&mstp_clks[MSTP309]),
 	CLKDEV_DEV_ID("e9a00000.sh-eth",	&mstp_clks[MSTP309]),
-	CLKDEV_DEV_ID("renesas_tpu_pwm",	&mstp_clks[MSTP304]),
+	CLKDEV_DEV_ID("renesas-tpu-pwm",	&mstp_clks[MSTP304]),
 
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
 	CLKDEV_DEV_ID("e6870000.sdhi",          &mstp_clks[MSTP415]),

arch/arm/mach-shmobile/headsmp-scu.S

@@ -37,13 +37,15 @@ ENTRY(shmobile_boot_scu)
 	lsl	r1, r1, #3		@ we will shift by cpu_id * 8 bits
 	ldr	r2, [r0, #8]		@ SCU Power Status Register
 	mov	r3, #3
-	bic	r2, r2, r3, lsl r1	@ Clear bits of our CPU (Run Mode)
+	lsl	r3, r3, r1
+	bic	r2, r2, r3		@ Clear bits of our CPU (Run Mode)
 	str	r2, [r0, #8]		@ write back
 
 	b	shmobile_invalidate_start
 ENDPROC(shmobile_boot_scu)
 
 	.text
+	.align	2
 	.globl	shmobile_scu_base
 shmobile_scu_base:
 	.space	4

arch/arm/mach-shmobile/headsmp.S

@@ -24,12 +24,16 @@ ENDPROC(shmobile_invalidate_start)
  * This will be mapped at address 0 by SBAR register.
  * We need _long_ jump to the physical address.
  */
+	.arm
 	.align  12
 ENTRY(shmobile_boot_vector)
 	ldr     r0, 2f
-	ldr     pc, 1f
+	ldr     r1, 1f
+	bx	r1
+
 ENDPROC(shmobile_boot_vector)
 
+	.align	2
 	.globl	shmobile_boot_fn
 shmobile_boot_fn:
 1:	.space	4

arch/arm/mach-shmobile/include/mach/zboot.h

@@ -1,7 +1,6 @@
 #ifndef ZBOOT_H
 #define ZBOOT_H
 
-#include <asm/mach-types.h>
 #include <mach/zboot_macros.h>
 
 /**************************************************
@@ -11,7 +10,6 @@
  **************************************************/
 
 #ifdef CONFIG_MACH_MACKEREL
-#define MACH_TYPE	MACH_TYPE_MACKEREL
 #define MEMORY_START	0x40000000
 #include "mach/head-mackerel.txt"
 #else

arch/arm/mach-shmobile/sleep-sh7372.S

@@ -41,6 +41,7 @@
 sh7372_resume_core_standby_sysc:
 	ldr     pc, 1f
 
+	.align	2
 	.globl	sh7372_cpu_resume
 sh7372_cpu_resume:
 1:	.space	4
@@ -96,6 +97,7 @@ sh7372_do_idle_sysc:
 1:
 	b      1b
 
+	.align	2
 kernel_flush:
 	.word v7_flush_dcache_all
 #endif

arch/arm/plat-omap/dma.c

@@ -2083,6 +2083,7 @@ static int omap_system_dma_probe(struct platform_device *pdev)
 		dma_irq = platform_get_irq_byname(pdev, irq_name);
 		if (dma_irq < 0) {
 			dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
+			ret = dma_irq;
 			goto exit_dma_lch_fail;
 		}
 		ret = setup_irq(dma_irq, &omap24xx_dma_irq);

drivers/mfd/syscon.c

@@ -159,9 +159,6 @@ static int syscon_probe(struct platform_device *pdev)
 
 static const struct platform_device_id syscon_ids[] = {
 	{ "syscon", },
-#ifdef CONFIG_ARCH_CLPS711X
-	{ "clps711x-syscon", },
-#endif
 	{ }
 };