Merge commit 'tip/core/iommu' into amd-iommu/fixes

Documentation/ABI/testing/sysfs-kernel-slab

@@ -0,0 +1,479 @@
+What:		/sys/kernel/slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The /sys/kernel/slab directory contains a snapshot of the
+		internal state of the SLUB allocator for each cache.  Certain
+		files may be modified to change the behavior of the cache (and
+		any cache it aliases, if any).
+Users:		kernel memory tuning tools
+
+What:		/sys/kernel/slab/cache/aliases
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The aliases file is read-only and specifies how many caches
+		have merged into this cache.
+
+What:		/sys/kernel/slab/cache/align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The align file is read-only and specifies the cache's object
+		alignment in bytes.
+
+What:		/sys/kernel/slab/cache/alloc_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_calls file is read-only and lists the kernel code
+		locations from which allocations for this cache were performed.
+		The alloc_calls file only contains information if debugging is
+		enabled for that cache (see Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/alloc_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_fastpath file is read-only and specifies how many
+		objects have been allocated using the fast path.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_from_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_from_partial file is read-only and specifies how
+		many times a cpu slab has been full and it has been refilled
+		by using a slab from the list of partially used slabs.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_refill
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_refill file is read-only and specifies how many
+		times the per-cpu freelist was empty but there were objects
+		available as the result of remote cpu frees.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slab file is read-only and specifies how many times
+		a new slab had to be allocated from the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/alloc_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The alloc_slowpath file is read-only and specifies how many
+		objects have been allocated using the slow path because of a
+		refill or allocation from a partial or new slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/cache_dma
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cache_dma file is read-only and specifies whether objects
+		are from ZONE_DMA.
+		Available when CONFIG_ZONE_DMA is enabled.
+
+What:		/sys/kernel/slab/cache/cpu_slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The cpu_slabs file is read-only and displays how many cpu slabs
+		are active and their NUMA locality.
+
+What:		/sys/kernel/slab/cache/cpuslab_flush
+Date:		April 2009
+KernelVersion:	2.6.31
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file cpuslab_flush is read-only and specifies how many
+		times a cache's cpu slabs have been flushed as the result of
+		destroying or shrinking a cache, a cpu going offline, or as
+		the result of forcing an allocation from a certain node.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/ctor
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The ctor file is read-only and specifies the cache's object
+		constructor function, which is invoked for each object when a
+		new slab is allocated.
+
+What:		/sys/kernel/slab/cache/deactivate_empty
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_empty is read-only and specifies how many
+		times an empty cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_full
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_full is read-only and specifies how many
+		times a full cpu slab was deactivated.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_remote_frees
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_remote_frees is read-only and specifies how
+		many times a cpu slab has been deactivated and contained free
+		objects that were freed remotely.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_head
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_head is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		head of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/deactivate_to_tail
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file deactivate_to_tail is read-only and specifies how
+		many times a partial cpu slab was deactivated and added to the
+		tail of its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/destroy_by_rcu
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The destroy_by_rcu file is read-only and specifies whether
+		slabs (not objects) are freed by rcu.
+
+What:		/sys/kernel/slab/cache/free_add_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_add_partial is read-only and specifies how many
+		times an object has been freed in a full slab so that it had to
+		added to its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_calls
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_calls file is read-only and lists the locations of
+		object frees if slab debugging is enabled (see
+		Documentation/vm/slub.txt).
+
+What:		/sys/kernel/slab/cache/free_fastpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_fastpath file is read-only and specifies how many
+		objects have been freed using the fast path because it was an
+		object from the cpu slab.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_frozen
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_frozen file is read-only and specifies how many
+		objects have been freed to a frozen slab (i.e. a remote cpu
+		slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_remove_partial
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file free_remove_partial is read-only and specifies how
+		many times an object has been freed to a now-empty slab so
+		that it had to be removed from its node's partial list.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slab
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slab file is read-only and specifies how many times an
+		empty slab has been freed back to the page allocator.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/free_slowpath
+Date:		February 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The free_slowpath file is read-only and specifies how many
+		objects have been freed using the slow path (i.e. to a full or
+		partial slab).
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/hwcache_align
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The hwcache_align file is read-only and specifies whether
+		objects are aligned on cachelines.
+
+What:		/sys/kernel/slab/cache/min_partial
+Date:		February 2009
+KernelVersion:	2.6.30
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		David Rientjes <rientjes@google.com>
+Description:
+		The min_partial file specifies how many empty slabs shall
+		remain on a node's partial list to avoid the overhead of
+		allocating new slabs.  Such slabs may be reclaimed by utilizing
+		the shrink file.
+
+What:		/sys/kernel/slab/cache/object_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The object_size file is read-only and specifies the cache's
+		object size.
+
+What:		/sys/kernel/slab/cache/objects
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects file is read-only and displays how many objects are
+		active and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/objects_partial
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The objects_partial file is read-only and displays how many
+		objects are on partial slabs and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/objs_per_slab
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file objs_per_slab is read-only and specifies how many
+		objects may be allocated from a single slab of the order
+		specified in /sys/kernel/slab/cache/order.
+
+What:		/sys/kernel/slab/cache/order
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The order file specifies the page order at which new slabs are
+		allocated.  It is writable and can be changed to increase the
+		number of objects per slab.  If a slab cannot be allocated
+		because of fragmentation, SLUB will retry with the minimum order
+		possible depending on its characteristics.
+
+What:		/sys/kernel/slab/cache/order_fallback
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file order_fallback is read-only and specifies how many
+		times an allocation of a new slab has not been possible at the
+		cache's order and instead fallen back to its minimum possible
+		order.
+		Available when CONFIG_SLUB_STATS is enabled.
+
+What:		/sys/kernel/slab/cache/partial
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The partial file is read-only and displays how long many
+		partial slabs there are and how long each node's list is.
+
+What:		/sys/kernel/slab/cache/poison
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The poison file specifies whether objects should be poisoned
+		when a new slab is allocated.
+
+What:		/sys/kernel/slab/cache/reclaim_account
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The reclaim_account file specifies whether the cache's objects
+		are reclaimable (and grouped by their mobility).
+
+What:		/sys/kernel/slab/cache/red_zone
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The red_zone file specifies whether the cache's objects are red
+		zoned.
+
+What:		/sys/kernel/slab/cache/remote_node_defrag_ratio
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The file remote_node_defrag_ratio specifies the percentage of
+		times SLUB will attempt to refill the cpu slab with a partial
+		slab from a remote node as opposed to allocating a new slab on
+		the local node.  This reduces the amount of wasted memory over
+		the entire system but can be expensive.
+		Available when CONFIG_NUMA is enabled.
+
+What:		/sys/kernel/slab/cache/sanity_checks
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The sanity_checks file specifies whether expensive checks
+		should be performed on free and, at minimum, enables double free
+		checks.  Caches that enable sanity_checks cannot be merged with
+		caches that do not.
+
+What:		/sys/kernel/slab/cache/shrink
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The shrink file is written when memory should be reclaimed from
+		a cache.  Empty partial slabs are freed and the partial list is
+		sorted so the slabs with the fewest available objects are used
+		first.
+
+What:		/sys/kernel/slab/cache/slab_size
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slab_size file is read-only and specifies the object size
+		with metadata (debugging information and alignment) in bytes.
+
+What:		/sys/kernel/slab/cache/slabs
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The slabs file is read-only and displays how long many slabs
+		there are (both cpu and partial) and from which nodes they are
+		from.
+
+What:		/sys/kernel/slab/cache/store_user
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The store_user file specifies whether the location of
+		allocation or free should be tracked for a cache.
+
+What:		/sys/kernel/slab/cache/total_objects
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The total_objects file is read-only and displays how many total
+		objects a cache has and from which nodes they are from.
+
+What:		/sys/kernel/slab/cache/trace
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		The trace file specifies whether object allocations and frees
+		should be traced.
+
+What:		/sys/kernel/slab/cache/validate
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
+		Christoph Lameter <cl@linux-foundation.org>
+Description:
+		Writing to the validate file causes SLUB to traverse all of its
+		cache's objects and check the validity of metadata.

Documentation/DMA-API.txt

@@ -704,12 +704,24 @@ this directory the following files can currently be found:
 				The current number of free dma_debug_entries
 				in the allocator.
 
+	dma-api/driver-filter
+				You can write a name of a driver into this file
+				to limit the debug output to requests from that
+				particular driver. Write an empty string to
+				that file to disable the filter and see
+				all errors again.
+
 If you have this code compiled into your kernel it will be enabled by default.
 If you want to boot without the bookkeeping anyway you can provide
 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
 Notice that you can not enable it again at runtime. You have to reboot to do
 so.
 
+If you want to see debug messages only for a special device driver you can
+specify the dma_debug_driver=<drivername> parameter. This will enable the
+driver filter at boot time. The debug code will only print errors for that
+driver afterwards. This filter can be disabled or changed later using debugfs.
+
 When the code disables itself at runtime this is most likely because it ran
 out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you

Documentation/DocBook/kgdb.tmpl

@@ -281,7 +281,7 @@
     seriously wrong while debugging, it will most often be the case
     that you want to enable gdb to be verbose about its target
     communications.  You do this prior to issuing the <constant>target
-    remote</constant> command by typing in: <constant>set remote debug 1</constant>
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
     </para>
   </chapter>
   <chapter id="KGDBTestSuite">

Documentation/filesystems/tmpfs.txt

@@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
 Author:
    Christoph Rohland <cr@sap.com>, 1.12.01
 Updated:
-   Hugh Dickins <hugh@veritas.com>, 4 June 2007
+   Hugh Dickins, 4 June 2007

Documentation/hwmon/sysfs-interface

@@ -150,6 +150,11 @@ fan[1-*]_min	Fan minimum value
 		Unit: revolution/min (RPM)
 		RW
 
+fan[1-*]_max	Fan maximum value
+		Unit: revolution/min (RPM)
+		Only rarely supported by the hardware.
+		RW
+
 fan[1-*]_input	Fan input value.
 		Unit: revolution/min (RPM)
 		RO
@@ -390,6 +395,7 @@ OR
 in[0-*]_min_alarm
 in[0-*]_max_alarm
 fan[1-*]_min_alarm
+fan[1-*]_max_alarm
 temp[1-*]_min_alarm
 temp[1-*]_max_alarm
 temp[1-*]_crit_alarm

Documentation/input/multi-touch-protocol.txt

@@ -18,8 +18,12 @@ Usage
 Anonymous finger details are sent sequentially as separate packets of ABS
 events. Only the ABS_MT events are recognized as part of a finger
 packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
@@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
 ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
 device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
 of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else.  Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   SYN_REPORT
 
 
 Event Semantics
@@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
 
 The length of the major axis of the contact. The length should be given in
 surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
 
 ABS_MT_TOUCH_MINOR
 
 The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
 
 ABS_MT_WIDTH_MAJOR
 
 The length, in surface units, of the major axis of the approaching
 tool. This should be understood as the size of the tool itself. The
 orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
 
 ABS_MT_WIDTH_MINOR
 
 The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
 
 The above four values can be used to derive additional information about
 the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
@@ -70,14 +89,17 @@ different characteristic widths [1].
 
 ABS_MT_ORIENTATION
 
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned.  Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
 
 ABS_MT_POSITION_X
 
@@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
 contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+   ABS_MT_TOUCH_MAJOR := max(X, Y)
+   ABS_MT_TOUCH_MINOR := min(X, Y)
+   ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
 
 
 Finger Tracking
@@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
 anonymous contacts currently on the surface. The order in which the packets
 appear in the event stream is not important.
 
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
 initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
 unique until the contact vanishes (when the finger leaves the surface). The
 problem of assigning a set of anonymous fingers to a set of identified
 fingers is a euclidian bipartite matching problem at each event update, and
 relies on a sufficiently rapid update rate.
 
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
 Notes
 -----
 
@@ -136,5 +189,7 @@ could be used to derive tilt.
 time of writing (April 2009), the MT protocol is not yet merged, and the
 prototype implements finger matching, basic mouse support and two-finger
 scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
 implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.

Documentation/kernel-parameters.txt

@@ -329,11 +329,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				    flushed before they will be reused, which
 				    is a lot of faster
 
-	amd_iommu_size= [HW,X86-64]
-			Define the size of the aperture for the AMD IOMMU
-			driver. Possible values are:
-			'32M', '64M' (default), '128M', '256M', '512M', '1G'
-
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -646,6 +641,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			DMA-API debugging code disables itself because the
 			architectural default is too low.
 
+	dma_debug_driver=<driver_name>
+			With this option the DMA-API debugging driver
+			filter feature can be enabled at boot time. Just
+			pass the driver to filter for as the parameter.
+			The filter can be disabled or changed to another
+			driver later using sysfs.
+
 	dscc4.setup=	[NET]
 
 	dtc3181e=	[HW,SCSI]
@@ -1535,6 +1537,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
+	noxsave		[BUGS=X86] Disables x86 extended register state save
+			and restore using xsave. The kernel will fallback to
+			enabling legacy floating-point and sse state.
+
 	nohlt		[BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
 			wfi(ARM) instruction doesn't work correctly and not to
 			use it. This is also useful when using JTAG debugger.

Documentation/networking/ip-sysctl.txt

@@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
 	See tcp_wmem for a description.
 
-UNDOCUMENTED:
 
 /proc/sys/net/core/*
-	dev_weight FIXME
+dev_weight - INTEGER
+	The maximum number of packets that kernel can handle on a NAPI
+	interrupt, it's a Per-CPU variable.
+
+	Default: 64
 
 /proc/sys/net/unix/*
-	max_dgram_qlen FIXME
+max_dgram_qlen - INTEGER
+	The maximum length of dgram socket receive queue
+
+	Default: 10
+
+
+UNDOCUMENTED:
 
 /proc/sys/net/irda/*
 	fast_poll_increase FIXME

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -334,6 +334,7 @@ STAC9227/9228/9229/927x
   ref-no-jd	Reference board without HP/Mic jack detection
   3stack	D965 3stack
   5stack	D965 5stack + SPDIF
+  5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
   auto		BIOS setup (default)

Documentation/sound/alsa/Procfile.txt

@@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
 	When this value is greater than 1, the driver will show the
 	stack trace additionally.  This may help the debugging.
 
+	Since 2.6.30, this option also enables the hwptr check using
+	jiffies.  This detects spontaneous invalid pointer callback
+	values, but can be lead to too much corrections for a (mostly
+	buggy) hardware that doesn't give smooth pointer updates.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 

Documentation/sysctl/vm.txt

@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -469,32 +467,6 @@ The default value is 0.
 
 ==============================================================
 
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2.  The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created.  The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8.  The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.

Documentation/sysfs-rules.txt

@@ -113,7 +113,7 @@ versions of the sysfs interface.
   "devices" directory at /sys/subsystem/<name>/devices.
 
   If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
-  ignored. If it does not exist, you have always to scan all three
+  ignored. If it does not exist, you always have to scan all three
   places, as the kernel is free to move a subsystem from one place to
   the other, as long as the devices are still reachable by the same
   subsystem name.

MAINTAINERS

@@ -434,7 +434,7 @@ F:	arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
 P:	Thomas Dahlmann
-M:	thomas.dahlmann@amd.com
+M:	dahlmann.thomas@arcor.de
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
@@ -624,6 +624,7 @@ M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
+F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
 P:	Russell King
@@ -650,6 +651,7 @@ P:	Paulius Zaleckas
 M:	paulius.zaleckas@teltonika.lt
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
+F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
 P:	Russell King
@@ -1132,17 +1134,17 @@ F:	fs/bfs/
 F:	include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:	Bryan Wu
-M:	cooloney@kernel.org
+P:	Mike Frysinger
+M:	vapier@gentoo.org
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:	Bryan Wu
-M:	cooloney@kernel.org
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P:	Michael Hennerich
+M:	michael.hennerich@analog.com
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/net/bfin_mac.*
@@ -1150,7 +1152,7 @@ F:	drivers/net/bfin_mac.*
 BLACKFIN RTC DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
@@ -1158,7 +1160,7 @@ F:	drivers/rtc/rtc-bfin.c
 BLACKFIN SERIAL DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/serial/bfin_5xx.c
@@ -1166,7 +1168,7 @@ F:	drivers/serial/bfin_5xx.c
 BLACKFIN WATCHDOG DRIVER
 P:	Mike Frysinger
 M:	vapier.adi@gmail.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/watchdog/bfin_wdt.c
@@ -1174,7 +1176,7 @@ F:	drivers/watchdog/bfin_wdt.c
 BLACKFIN I2C TWI DRIVER
 P:	Sonic Zhang
 M:	sonic.zhang@analog.com
-L:	uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
@@ -1431,6 +1433,14 @@ P:	Russell King
 M:	linux@arm.linux.org.uk
 F:	include/linux/clk.h
 
+CISCO FCOE HBA DRIVER
+P:	Abhijeet Joglekar
+M:	abjoglek@cisco.com
+P:	Joe Eykholt
+M:	jeykholt@cisco.com
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+
 CODA FILE SYSTEM
 P:	Jan Harkes
 M:	jaharkes@cs.cmu.edu
@@ -1532,6 +1542,13 @@ W:	http://www.fi.muni.cz/~kas/cosa/
 S:	Maintained
 F:	drivers/net/wan/cosa*
 
+CPMAC ETHERNET DRIVER
+P:	Florian Fainelli
+M:	florian@openwrt.org
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/cpmac.c
+
 CPU FREQUENCY DRIVERS
 P:	Dave Jones
 M:	davej@redhat.com
@@ -1963,8 +1980,8 @@ F:	include/linux/edac.h
 
 EDAC-E752X
 P:	Mark Gross
-P:	Doug Thompson
 M:	mark.gross@intel.com
+P:	Doug Thompson
 M:	dougthompson@xmission.com
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
@@ -2241,7 +2258,7 @@ P:	Li Yang
 M:	leoli@freescale.com
 P:	Zhang Wei
 M:	zw@zh-kernel.org
-L:	linuxppc-embedded@ozlabs.org
+L:	linuxppc-dev@ozlabs.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
@@ -5579,6 +5596,14 @@ M:	ian@mnementh.co.uk
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc.*
 
+TMPFS (SHMEM FILESYSTEM)
+P:	Hugh Dickins
+M:	hugh.dickins@tiscali.co.uk
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	include/linux/shmem_fs.h
+F:	mm/shmem.c
+
 TPM DEVICE DRIVER
 P:	Debora Velarde
 M:	debora@linux.vnet.ibm.com

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc5
-NAME = Vindictive Armadillo
+EXTRAVERSION = -rc8
+NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/alpha/include/asm/percpu.h

@@ -1,7 +1,9 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
+#include <linux/percpu-defs.h>
 
 /*
  * Determine the real variable name from the name visible in the
@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#include <asm-generic/percpu.h>
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
 
 #endif /* __ALPHA_PERCPU_H */

arch/arm/Kconfig

@@ -273,6 +273,7 @@ config ARCH_EP93XX
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -976,10 +977,9 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say Y.
 
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
-	default y
-	depends on FLATMEM
+	default n
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE

arch/arm/common/gic.c

@@ -253,9 +253,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 }
 
 #ifdef CONFIG_SMP
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
-	unsigned long map = *cpus_addr(cpumask);
+	unsigned long map = *cpus_addr(*mask);
 
 	/* this always happens on GIC0 */
 	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);

arch/arm/include/asm/assembler.h

@@ -114,3 +114,16 @@
 	.align	3;				\
 	.long	9999b,9001f;			\
 	.previous
+
+/*
+ * SMP data memory barrier
+ */
+	.macro	smp_dmb
+#ifdef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7
+	dmb
+#elif __LINUX_ARM_ARCH__ == 6
+	mcr	p15, 0, r0, c7, c10, 5	@ dmb
+#endif
+#endif
+	.endm

arch/arm/include/asm/atomic.h

@@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i)
 	: "cc");
 }
 
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_add\n"
+"1:	ldrex	%0, [%2]\n"
+"	add	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long tmp;
 	int result;
 
+	smp_mb();
+
 	__asm__ __volatile__("@ atomic_add_return\n"
 "1:	ldrex	%0, [%2]\n"
 "	add	%0, %0, %3\n"
@@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
+	smp_mb();
+
 	return result;
 }
 
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_sub\n"
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+}
+
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	unsigned long tmp;
 	int result;
 
+	smp_mb();
+
 	__asm__ __volatile__("@ atomic_sub_return\n"
 "1:	ldrex	%0, [%2]\n"
 "	sub	%0, %0, %3\n"
@@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
+	smp_mb();
+
 	return result;
 }
 
@@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 {
 	unsigned long oldval, res;
 
+	smp_mb();
+
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
 		"ldrex	%1, [%2]\n"
@@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 		    : "cc");
 	} while (res);
 
+	smp_mb();
+
 	return oldval;
 }
 
@@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
 
 	return val;
 }
+#define atomic_add(i, v)	(void) atomic_add_return(i, v)
 
 static inline int atomic_sub_return(int i, atomic_t *v)
 {
@@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 
 	return val;
 }
+#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
 
 static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
@@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 }
 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
 
-#define atomic_add(i, v)	(void) atomic_add_return(i, v)
-#define atomic_inc(v)		(void) atomic_add_return(1, v)
-#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
-#define atomic_dec(v)		(void) atomic_sub_return(1, v)
+#define atomic_inc(v)		atomic_add(1, v)
+#define atomic_dec(v)		atomic_sub(1, v)
 
 #define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
 #define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
@@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
 
 #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
 
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec()	barrier()
-#define smp_mb__after_atomic_dec()	barrier()
-#define smp_mb__before_atomic_inc()	barrier()
-#define smp_mb__after_atomic_inc()	barrier()
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
 
 #include <asm-generic/atomic.h>
 #endif

arch/arm/include/asm/flat.h

@@ -5,9 +5,6 @@
 #ifndef __ARM_FLAT_H__
 #define __ARM_FLAT_H__
 
-/* An odd number of words will be pushed after this alignment, so
-   deliberately misalign the value.  */
-#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
 #define	flat_argvp_envp_on_stack()		1
 #define	flat_old_ram_flag(flags)		(flags)
 #define	flat_reloc_valid(reloc, size)		((reloc) <= (size))

arch/arm/include/asm/hardware/gic.h

@@ -36,7 +36,7 @@
 void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
 void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 #endif
 
 #endif

arch/arm/include/asm/smp.h

@@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid);
 /*
  * Raise an IPI cross call on CPUs in callmap.
  */
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
+extern void smp_cross_call(const struct cpumask *mask);
 
 /*
  * Broadcast a clock event to other CPUs.
  */
-extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_timer_broadcast(const struct cpumask *mask);
 
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
@@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu);
 extern void platform_cpu_enable(unsigned int cpu);
 
 extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
 
 /*
  * Local timer interrupt handling function (can be IPI'ed).

arch/arm/include/asm/system.h

@@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 	unsigned int tmp;
 #endif
 
+	smp_mb();
+
 	switch (size) {
 #if __LINUX_ARM_ARCH__ >= 6
 	case 1:
@@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 		__bad_xchg(ptr, size), ret = 0;
 		break;
 	}
+	smp_mb();
 
 	return ret;
 }
@@ -316,6 +319,12 @@ extern void enable_hlt(void);
 
 #include <asm-generic/cmpxchg-local.h>
 
+#if __LINUX_ARM_ARCH__ < 6
+
+#ifdef CONFIG_SMP
+#error "SMP is not supported on this platform"
+#endif
+
 /*
  * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
  * them available.
@@ -329,6 +338,173 @@ extern void enable_hlt(void);
 #include <asm-generic/cmpxchg.h>
 #endif
 
+#else	/* __LINUX_ARM_ARCH__ >= 6 */
+
+extern void __bad_cmpxchg(volatile void *ptr, int size);
+
+/*
+ * cmpxchg only support 32-bits operands on ARMv6.
+ */
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	unsigned long oldval, res;
+
+	switch (size) {
+#ifdef CONFIG_CPU_32v6K
+	case 1:
+		do {
+			asm volatile("@ __cmpxchg1\n"
+			"	ldrexb	%1, [%2]\n"
+			"	mov	%0, #0\n"
+			"	teq	%1, %3\n"
+			"	strexbeq %0, %4, [%2]\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+	case 2:
+		do {
+			asm volatile("@ __cmpxchg1\n"
+			"	ldrexh	%1, [%2]\n"
+			"	mov	%0, #0\n"
+			"	teq	%1, %3\n"
+			"	strexheq %0, %4, [%2]\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+#endif /* CONFIG_CPU_32v6K */
+	case 4:
+		do {
+			asm volatile("@ __cmpxchg4\n"
+			"	ldrex	%1, [%2]\n"
+			"	mov	%0, #0\n"
+			"	teq	%1, %3\n"
+			"	strexeq %0, %4, [%2]\n"
+				: "=&r" (res), "=&r" (oldval)
+				: "r" (ptr), "Ir" (old), "r" (new)
+				: "memory", "cc");
+		} while (res);
+		break;
+	default:
+		__bad_cmpxchg(ptr, size);
+		oldval = 0;
+	}
+
+	return oldval;
+}
+
+static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
+					 unsigned long new, int size)
+{
+	unsigned long ret;
+
+	smp_mb();
+	ret = __cmpxchg(ptr, old, new, size);
+	smp_mb();
+
+	return ret;
+}
+
+#define cmpxchg(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg_mb((ptr),			\
+					  (unsigned long)(o),		\
+					  (unsigned long)(n),		\
+					  sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+					    unsigned long old,
+					    unsigned long new, int size)
+{
+	unsigned long ret;
+
+	switch (size) {
+#ifndef CONFIG_CPU_32v6K
+	case 1:
+	case 2:
+		ret = __cmpxchg_local_generic(ptr, old, new, size);
+		break;
+#endif	/* !CONFIG_CPU_32v6K */
+	default:
+		ret = __cmpxchg(ptr, old, new, size);
+	}
+
+	return ret;
+}
+
+#define cmpxchg_local(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr),			\
+				       (unsigned long)(o),		\
+				       (unsigned long)(n),		\
+				       sizeof(*(ptr))))
+
+#ifdef CONFIG_CPU_32v6K
+
+/*
+ * Note : ARMv7-M (currently unsupported by Linux) does not support
+ * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
+ * not be allowed to use __cmpxchg64.
+ */
+static inline unsigned long long __cmpxchg64(volatile void *ptr,
+					     unsigned long long old,
+					     unsigned long long new)
+{
+	register unsigned long long oldval asm("r0");
+	register unsigned long long __old asm("r2") = old;
+	register unsigned long long __new asm("r4") = new;
+	unsigned long res;
+
+	do {
+		asm volatile(
+		"	@ __cmpxchg8\n"
+		"	ldrexd	%1, %H1, [%2]\n"
+		"	mov	%0, #0\n"
+		"	teq	%1, %3\n"
+		"	teqeq	%H1, %H3\n"
+		"	strexdeq %0, %4, %H4, [%2]\n"
+			: "=&r" (res), "=&r" (oldval)
+			: "r" (ptr), "Ir" (__old), "r" (__new)
+			: "memory", "cc");
+	} while (res);
+
+	return oldval;
+}
+
+static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
+						unsigned long long old,
+						unsigned long long new)
+{
+	unsigned long long ret;
+
+	smp_mb();
+	ret = __cmpxchg64(ptr, old, new);
+	smp_mb();
+
+	return ret;
+}
+
+#define cmpxchg64(ptr,o,n)						\
+	((__typeof__(*(ptr)))__cmpxchg64_mb((ptr),			\
+					    (unsigned long long)(o),	\
+					    (unsigned long long)(n)))
+
+#define cmpxchg64_local(ptr,o,n)					\
+	((__typeof__(*(ptr)))__cmpxchg64((ptr),				\
+					 (unsigned long long)(o),	\
+					 (unsigned long long)(n)))
+
+#else	/* !CONFIG_CPU_32v6K */
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif	/* CONFIG_CPU_32v6K */
+
+#endif	/* __LINUX_ARM_ARCH__ >= 6 */
+
 #endif /* __ASSEMBLY__ */
 
 #define arch_align_stack(x) (x)

arch/arm/kernel/elf.c

@@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
 		return 1;
 	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+	/*
+	 * If we have support for OABI programs, we can never allow NX
+	 * support - our signal syscall restart mechanism relies upon
+	 * being able to execute code placed on the user stack.
+	 */
+	return 1;
+#else
 	return 0;
+#endif
 }
 EXPORT_SYMBOL(arm_elf_read_implies_exec);

arch/arm/kernel/entry-armv.S

@@ -815,10 +815,7 @@ __kuser_helper_start:
  */
 
 __kuser_memory_barrier:				@ 0xffff0fa0
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
-#endif
+	smp_dmb
 	usr_ret	lr
 
 	.align	5

arch/arm/kernel/smp.c

@@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void)
 	per_cpu(cpu_data, cpu).idle = current;
 }
 
-static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
+static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
 {
 	unsigned long flags;
 	unsigned int cpu;
 
 	local_irq_save(flags);
 
-	for_each_cpu_mask(cpu, callmap) {
+	for_each_cpu(cpu, mask) {
 		struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
 
 		spin_lock(&ipi->lock);
@@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
 	/*
 	 * Call the platform specific cross-CPU call function.
 	 */
-	smp_cross_call(callmap);
+	smp_cross_call(mask);
 
 	local_irq_restore(flags);
 }
 
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
 void show_ipi_list(struct seq_file *p)
@@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
 
 void smp_send_reschedule(int cpu)
 {
-	send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
-void smp_send_timer(void)
-{
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_TIMER);
-}
-
-void smp_timer_broadcast(cpumask_t mask)
+void smp_timer_broadcast(const struct cpumask *mask)
 {
 	send_ipi_message(mask, IPI_TIMER);
 }
@@ -517,7 +510,7 @@ void smp_send_stop(void)
 {
 	cpumask_t mask = cpu_online_map;
 	cpu_clear(smp_processor_id(), mask);
-	send_ipi_message(mask, IPI_CPU_STOP);
+	send_ipi_message(&mask, IPI_CPU_STOP);
 }
 
 /*
@@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier)
 	return -EINVAL;
 }
 
-static int
-on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
+static void
+on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+		const struct cpumask *mask)
 {
-	int ret = 0;
-
 	preempt_disable();
 
-	ret = smp_call_function_mask(mask, func, info, wait);
-	if (cpu_isset(smp_processor_id(), mask))
+	smp_call_function_many(mask, func, info, wait);
+	if (cpumask_test_cpu(smp_processor_id(), mask))
 		func(info);
 
 	preempt_enable();
-
-	return ret;
 }
 
 /**********************************************************************/
@@ -602,20 +592,17 @@ void flush_tlb_all(void)
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	cpumask_t mask = mm->cpu_vm_mask;
-
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
 	struct tlb_args ta;
 
 	ta.ta_vma = vma;
 	ta.ta_start = uaddr;
 
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 void flush_tlb_range(struct vm_area_struct *vma,
                      unsigned long start, unsigned long end)
 {
-	cpumask_t mask = vma->vm_mm->cpu_vm_mask;
 	struct tlb_args ta;
 
 	ta.ta_vma = vma;
 	ta.ta_start = start;
 	ta.ta_end = end;
 
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)

arch/arm/lib/bitops.h

@@ -18,12 +18,14 @@
 	mov	r2, #1
 	add	r1, r1, r0, lsr #3	@ Get byte offset
 	mov	r3, r2, lsl r3		@ create mask
+	smp_dmb
 1:	ldrexb	r2, [r1]
 	ands	r0, r2, r3		@ save old value of bit
 	\instr	r2, r2, r3			@ toggle bit
 	strexb	ip, r2, [r1]
 	cmp	ip, #0
 	bne	1b
+	smp_dmb
 	cmp	r0, #0
 	movne	r0, #1
 2:	mov	pc, lr

arch/arm/mach-davinci/include/mach/asp.h

@@ -0,0 +1,25 @@
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */

arch/arm/mach-ep93xx/clock.c

@@ -21,15 +21,50 @@
 #include <asm/div64.h>
 #include <mach/hardware.h>
 
+
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+
 struct clk {
 	unsigned long	rate;
 	int		users;
+	int		sw_locked;
 	u32		enable_reg;
 	u32		enable_mask;
+
+	unsigned long	(*get_rate)(struct clk *clk);
 };
 
-static struct clk clk_uart = {
-	.rate		= 14745600,
+
+static unsigned long get_uart_rate(struct clk *clk);
+
+
+static struct clk clk_uart1 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart2 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.get_rate	= get_uart_rate,
+};
+static struct clk clk_uart3 = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
+	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
 static struct clk clk_f;
@@ -95,9 +130,9 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart),
-	INIT_CK("apb:uart2", NULL, &clk_uart),
-	INIT_CK("apb:uart3", NULL, &clk_uart),
+	INIT_CK("apb:uart1", NULL, &clk_uart1),
+	INIT_CK("apb:uart2", NULL, &clk_uart2),
+	INIT_CK("apb:uart3", NULL, &clk_uart3),
 	INIT_CK(NULL, "pll1", &clk_pll1),
 	INIT_CK(NULL, "fclk", &clk_f),
 	INIT_CK(NULL, "hclk", &clk_h),
@@ -125,6 +160,8 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value | clk->enable_mask, clk->enable_reg);
 	}
 
@@ -138,13 +175,29 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		if (clk->sw_locked)
+			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
 
+static unsigned long get_uart_rate(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
+	if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+		return EP93XX_EXT_CLK_RATE;
+	else
+		return EP93XX_EXT_CLK_RATE / 2;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_get_rate);
@@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = 14745600;
+	rate = EP93XX_EXT_CLK_RATE;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = 14745600;
+		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = 14745600;
+		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -159,7 +159,10 @@
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
 #define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
+#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)

arch/arm/mach-gemini/include/mach/hardware.h

@@ -15,10 +15,9 @@
 /*
  * Memory Map definitions
  */
-/* FIXME: Does it really swap SRAM like this? */
 #ifdef CONFIG_GEMINI_MEM_SWAP
 # define GEMINI_DRAM_BASE	0x00000000
-# define GEMINI_SRAM_BASE	0x20000000
+# define GEMINI_SRAM_BASE	0x70000000
 #else
 # define GEMINI_SRAM_BASE	0x00000000
 # define GEMINI_DRAM_BASE	0x10000000

arch/arm/mach-integrator/core.c

@@ -121,7 +121,7 @@ static struct clk uartclk = {
 	.rate	= 14745600,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "mb:16",
 		.clk		= &uartclk,

arch/arm/mach-ixp4xx/ixp4xx_npe.c

@@ -714,7 +714,7 @@ static int __init npe_init_module(void)
 	}
 
 	if (!found)
-		return -ENOSYS;
+		return -ENODEV;
 	return 0;
 }
 

arch/arm/mach-kirkwood/common.c

@@ -144,6 +144,9 @@ static struct platform_device kirkwood_ge00 = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= kirkwood_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@@ -202,6 +205,9 @@ static struct platform_device kirkwood_ge01 = {
 	.id		= 1,
 	.num_resources	= 1,
 	.resource	= kirkwood_ge01_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
@@ -386,12 +392,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
 
 static struct resource kirkwood_i2c_resources[] = {
 	{
-		.name	= "i2c",
 		.start	= I2C_PHYS_BASE,
 		.end	= I2C_PHYS_BASE + 0x1f,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.name	= "i2c",
 		.start	= IRQ_KIRKWOOD_TWSI,
 		.end	= IRQ_KIRKWOOD_TWSI,
 		.flags	= IORESOURCE_IRQ,

arch/arm/mach-kirkwood/ts219-setup.c

@@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP1_SPI_MOSI,
 	MPP2_SPI_SCK,
 	MPP3_SPI_MISO,
+	MPP4_SATA1_ACTn,
+	MPP5_SATA0_ACTn,
 	MPP8_TW_SDA,
 	MPP9_TW_SCK,
 	MPP10_UART0_TXD,
@@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_SATA1_PRESENTn,
-	MPP23_SATA0_PRESENTn,
 	0
 };
 

arch/arm/mach-l7200/include/mach/sys-clock.h

@@ -18,7 +18,7 @@
 
 /* IO_START and IO_BASE are defined in hardware.h */
 
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF)  /* Physical address */
 #define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
 
 /* Define the interface to the SYS_CLOCK */

arch/arm/mach-loki/common.c

@@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= loki_ge0_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
@@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = {
 	.id		= 1,
 	.num_resources	= 1,
 	.resource	= loki_ge1_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)

arch/arm/mach-mmp/include/mach/mfp-pxa168.h

@@ -3,6 +3,11 @@
 
 #include <mach/mfp.h>
 
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x1 << 13)
+#define MFP_DRIVE_MEDIUM	(0x2 << 13)
+#define MFP_DRIVE_FAST		(0x3 << 13)
+
 /* GPIO */
 #define GPIO0_GPIO		MFP_CFG(GPIO0, AF5)
 #define GPIO1_GPIO		MFP_CFG(GPIO1, AF5)

arch/arm/mach-mmp/include/mach/mfp-pxa910.h

@@ -3,6 +3,11 @@
 
 #include <mach/mfp.h>
 
+#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
+#define MFP_DRIVE_SLOW		(0x2 << 13)
+#define MFP_DRIVE_MEDIUM	(0x4 << 13)
+#define MFP_DRIVE_FAST		(0x8 << 13)
+
 /* UART2 */
 #define GPIO47_UART2_RXD	MFP_CFG(GPIO47, AF6)
 #define GPIO48_UART2_TXD	MFP_CFG(GPIO48, AF6)

arch/arm/mach-mmp/include/mach/mfp.h

@@ -12,16 +12,13 @@
  * possible, we make the following compromise:
  *
  * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 2. DRIVE strength definitions redefined to include the reserved bit
+ *    - the reserved bit differs between pxa168 and pxa910, and the
+ *      MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
  * 3. Override MFP_CFG() and MFP_CFG_DRV()
  * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
  */
 
-#define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
-#define MFP_DRIVE_SLOW		(0x2 << 13)
-#define MFP_DRIVE_MEDIUM	(0x4 << 13)
-#define MFP_DRIVE_FAST		(0x8 << 13)
-
 #undef MFP_CFG
 #undef MFP_CFG_DRV
 #undef MFP_CFG_LPM

arch/arm/mach-mmp/time.c

@@ -136,7 +136,7 @@ static struct clock_event_device ckevt = {
 	.set_mode	= timer_set_mode,
 };
 
-static cycle_t clksrc_read(void)
+static cycle_t clksrc_read(struct clocksource *cs)
 {
 	return timer_read();
 }

arch/arm/mach-mv78xx0/common.c

@@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = {
 	.id		= 1,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge01_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
@@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = {
 	.id		= 2,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge10_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
@@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = {
 	.id		= 3,
 	.num_resources	= 1,
 	.resource	= mv78xx0_ge11_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
@@ -532,12 +544,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
 
 static struct resource mv78xx0_i2c_0_resources[] = {
 	{
-		.name   = "i2c 0 base",
 		.start  = I2C_0_PHYS_BASE,
 		.end    = I2C_0_PHYS_BASE + 0x1f,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.name   = "i2c 0 irq",
 		.start  = IRQ_MV78XX0_I2C_0,
 		.end    = IRQ_MV78XX0_I2C_0,
 		.flags  = IORESOURCE_IRQ,
@@ -567,12 +577,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
 
 static struct resource mv78xx0_i2c_1_resources[] = {
 	{
-		.name   = "i2c 1 base",
 		.start  = I2C_1_PHYS_BASE,
 		.end    = I2C_1_PHYS_BASE + 0x1f,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.name   = "i2c 1 irq",
 		.start  = IRQ_MV78XX0_I2C_1,
 		.end    = IRQ_MV78XX0_I2C_1,
 		.flags  = IORESOURCE_IRQ,

arch/arm/mach-omap2/clock24xx.c

@@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
 	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
 	/* DSS domain clocks */
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dss_54m_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK("omapfb",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
 	/* L3 domain clocks */
 	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
 	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
@@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = {
 	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"usbhs_ick",	&usbhs_ick,	CK_243X),
+	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
 	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),

arch/arm/mach-omap2/clock34xx.c

@@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK(NULL,	"hsotgusb_ick",	&hsotgusb_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick,	CK_343X),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
@@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK(NULL,	"dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_tv_fck",	&dss_tv_fck,	CK_343X),
-	CLK(NULL,	"dss_96m_fck",	&dss_96m_fck,	CK_343X),
-	CLK(NULL,	"dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
-	CLK(NULL,	"dss_ick",	&dss_ick,	CK_343X),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck, CK_343X),
+	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
+	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
+	CLK("omapfb",	"ick",		&dss_ick,	CK_343X),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),

arch/arm/mach-omap2/clock34xx.h

@@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = {
 
 static struct clk gpio1_dbck = {
 	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &wkup_32k_fck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
@@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = {
 
 static struct clk gpio6_dbck = {
 	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
@@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = {
 
 static struct clk gpio5_dbck = {
 	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
@@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = {
 
 static struct clk gpio4_dbck = {
 	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
@@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = {
 
 static struct clk gpio3_dbck = {
 	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
@@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = {
 
 static struct clk gpio2_dbck = {
 	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &per_32k_alwon_fck,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,

arch/arm/mach-omap2/devices.c

@@ -354,10 +354,12 @@ static void omap_init_mcspi(void)
 	platform_device_register(&omap2_mcspi1);
 	platform_device_register(&omap2_mcspi2);
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
-	platform_device_register(&omap2_mcspi3);
+	if (cpu_is_omap2430() || cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi3);
 #endif
 #ifdef CONFIG_ARCH_OMAP3
-	platform_device_register(&omap2_mcspi4);
+	if (cpu_is_omap343x())
+		platform_device_register(&omap2_mcspi4);
 #endif
 }
 

arch/arm/mach-omap2/prm-regbits-34xx.h

@@ -409,7 +409,7 @@
 /* PM_PREPWSTST_CAM specific bits */
 
 /* PM_PWSTCTRL_USBHOST specific bits */
-#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		(1 << 4)
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		4
 
 /* RM_RSTST_PER specific bits */
 

arch/arm/mach-omap2/usb-tusb6010.c

@@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
 	unsigned	sysclk_ps;
 	int		status;
 
-	if (!refclk_psec || sysclk_ps == 0)
+	if (!refclk_psec || fclk_ps == 0)
 		return -ENODEV;
 
 	sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;

arch/arm/mach-orion5x/common.c

@@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = {
 	.id		= 0,
 	.num_resources	= 1,
 	.resource	= orion5x_eth_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
 };
 
 void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
@@ -248,12 +251,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
 
 static struct resource orion5x_i2c_resources[] = {
 	{
-		.name	= "i2c base",
 		.start	= I2C_PHYS_BASE,
 		.end	= I2C_PHYS_BASE + 0x1f,
 		.flags	= IORESOURCE_MEM,
 	}, {
-		.name	= "i2c irq",
 		.start	= IRQ_ORION5X_I2C,
 		.end	= IRQ_ORION5X_I2C,
 		.flags	= IORESOURCE_IRQ,

arch/arm/mach-pxa/ezx.c

@@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 	GPIO24_GPIO,				/* pcap chip select */
-	GPIO1_GPIO,				/* pcap interrupt */
-	GPIO4_GPIO,				/* WDI_AP */
-	GPIO55_GPIO,				/* SYS_RESTART */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* pcap interrupt */
+	GPIO4_GPIO | MFP_LPM_DRIVE_HIGH,	/* WDI_AP */
+	GPIO55_GPIO | MFP_LPM_DRIVE_HIGH,	/* SYS_RESTART */
 
 	/* MMC */
 	GPIO32_MMC_CLK,
@@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
 #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
 static unsigned long gen1_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO12_GPIO,
+	GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* bluetooth (bcm2035) */
-	GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO14_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO48_GPIO,				/* RESET */
 	GPIO28_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO57_GPIO,				/* AP_RDY */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI2 */
-	GPIO82_GPIO,				/* RESET */
-	GPIO99_GPIO,				/* TC_MM_EN */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO57_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH,	/* WDI2 */
+	GPIO82_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
+	GPIO99_GPIO | MFP_LPM_DRIVE_HIGH,	/* TC_MM_EN */
 
 	/* sound */
 	GPIO52_SSP3_SCLK,
@@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
 	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
 static unsigned long gen2_pin_config[] __initdata = {
 	/* flip / lockswitch */
-	GPIO15_GPIO,
+	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
 
 	/* EOC */
-	GPIO10_GPIO,
+	GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
 
 	/* bluetooth (bcm2045) */
-	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO13_GPIO | WAKEUP_ON_EDGE_RISE,	/* HOSTWAKE */
 	GPIO37_GPIO,				/* RESET */
 	GPIO57_GPIO,				/* WAKEUP */
 
 	/* Neptune handshake */
-	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
-	GPIO96_GPIO,				/* AP_RDY */
-	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
-	GPIO116_GPIO,				/* RESET */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL,	/* BP_RDY */
+	GPIO96_GPIO | MFP_LPM_DRIVE_HIGH,	/* AP_RDY */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL,	/* WDI */
+	GPIO116_GPIO | MFP_LPM_DRIVE_HIGH,	/* RESET */
 	GPIO41_GPIO,				/* BP_FLASH */
 
 	/* sound */

arch/arm/mach-pxa/include/mach/reset.h

@@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask);
 /**
  * init_gpio_reset() - register GPIO as reset generator
  * @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
  */
-extern int init_gpio_reset(int gpio, int output);
+extern int init_gpio_reset(int gpio, int output, int level);
 
 #endif /* __ASM_ARCH_RESET_H */

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 {
@@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_pgsr[i] = PGSR(i);
 
 		GPDR(i * 32) = gpdr_lpm[i];
 	}
@@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
 		GPDR(i * 32) = saved_gpdr[i];
+		PGSR(i) = saved_pgsr[i];
 	}
 	PSSR = PSSR_RDH | PSSR_PH;
 	return 0;
@@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void)
 	if (cpu_is_pxa27x())
 		pxa27x_mfp_init();
 
+	/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+	PSSR = PSSR_RDH;
+
 	/* initialize gafr_run[], pgsr_lpm[] from existing values */
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
 		gpdr_lpm[i] = GPDR(i * 32);

arch/arm/mach-pxa/palmld.c

@@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
+	GPIO95_AC97_nRESET,
 
 	/* IrDA */
 	GPIO108_GPIO,	/* ir disable */

arch/arm/mach-pxa/palmt5.c

@@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
 	GPIO95_AC97_nRESET,
 
 	/* IrDA */

arch/arm/mach-pxa/palmtx.c

@@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
 	GPIO29_AC97_SDATA_IN_0,
 	GPIO30_AC97_SDATA_OUT,
 	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
 	GPIO95_AC97_nRESET,
 
 	/* IrDA */

arch/arm/mach-pxa/reset.c

@@ -20,7 +20,7 @@ static void do_hw_reset(void);
 
 static int reset_gpio = -1;
 
-int init_gpio_reset(int gpio, int output)
+int init_gpio_reset(int gpio, int output, int level)
 {
 	int rc;
 
@@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output)
 	}
 
 	if (output)
-		rc = gpio_direction_output(gpio, 0);
+		rc = gpio_direction_output(gpio, level);
 	else
 		rc = gpio_direction_input(gpio);
 	if (rc) {

arch/arm/mach-pxa/spitz.c

@@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev)
 	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 }
 
+static void spitz_ohci_exit(struct device *dev)
+{
+	gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	.init		= spitz_ohci_init,
+	.exit		= spitz_ohci_exit,
 	.flags		= ENABLE_PORT_ALL | NO_OC_PROTECTION,
 	.power_budget	= 150,
 };
@@ -731,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd)
 
 static void __init common_init(void)
 {
-	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
+	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 

arch/arm/mach-pxa/tosa.c

@@ -897,7 +897,7 @@ static void __init tosa_init(void)
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
-	init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
 
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;

arch/arm/mach-pxa/viper.c

@@ -46,6 +46,7 @@
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/i2c.h>
+#include <mach/regs-uart.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>

arch/arm/mach-realview/core.c

@@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq)
 {
 	u32 val;
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-	/*
-	 * The dummy clock device has to be registered before the main device
-	 * so that the latter will broadcast the clock events
-	 */
-	local_timer_setup();
-#endif
-
 	/* 
 	 * set clock frequency: 
 	 *	REALVIEW_REFCLK is 32KHz

arch/arm/mach-realview/include/mach/smp.h

@@ -15,16 +15,9 @@
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(cpumask_t callmap)
-{
-	gic_raise_softirq(callmap, 1);
-}
-
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
+static inline void smp_cross_call(const struct cpumask *mask)
 {
+	gic_raise_softirq(mask, 1);
 }
 
 #endif

arch/arm/mach-realview/localtimer.c

@@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void)
 	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
 
 	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 200;
+	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_PERIODIC |
+				  CLOCK_EVT_FEAT_DUMMY;
+	clk->rating		= 400;
 	clk->mult               = 1;
 	clk->set_mode		= dummy_timer_set_mode;
 	clk->broadcast		= smp_timer_broadcast;

arch/arm/mach-realview/platsmp.c

@@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	trace_hardirqs_off();
 
-	/*
-	 * the primary core may have used a "cross call" soft interrupt
-	 * to get this processor out of WFI in the BootMonitor - make
-	 * sure that we are no longer being sent this soft interrupt
-	 */
-	smp_cross_call_done(cpumask_of_cpu(cpu));
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
@@ -136,7 +129,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Use smp_cross_call() for this, since there's little
 	 * point duplicating the code here
 	 */
-	smp_cross_call(cpumask_of_cpu(cpu));
+	smp_cross_call(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -224,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (max_cpus > ncores)
 		max_cpus = ncores;
 
-#ifdef CONFIG_LOCAL_TIMERS
+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
 	/*
-	 * Enable the local timer for primary CPU. If the device is
-	 * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
-	 * realview_timer_init
+	 * Enable the local timer or broadcast device for the boot CPU.
 	 */
 	local_timer_setup();
 #endif

arch/arm/mach-s3c2410/mach-bast.c

@@ -588,8 +588,6 @@ static void __init bast_map_io(void)
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
 
-	s3c_i2c0_set_platdata(&bast_i2c_info);
-
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
@@ -602,6 +600,7 @@ static void __init bast_init(void)
 	sysdev_class_register(&bast_pm_sysclass);
 	sysdev_register(&bast_pm_sysdev);
 
+	s3c_i2c0_set_platdata(&bast_i2c_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 

arch/arm/mach-versatile/core.c

@@ -413,7 +413,7 @@ static struct clk ref24_clk = {
 	.rate	= 24000000,
 };
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	{	/* UART0 */
 		.dev_id		= "dev:f1",
 		.clk		= &ref24_clk,

arch/arm/nwfpe/fpa11.h

@@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData,
 extern unsigned int DoubleCPDO(struct roundingData *roundData,
 			       const unsigned int opcode, FPREG * rFd);
 
+/* extneded_cpdo.c */
+extern unsigned int ExtendedCPDO(struct roundingData *roundData,
+				 const unsigned int opcode, FPREG * rFd);
+
 #endif

arch/arm/nwfpe/fpa11_cprt.c

@@ -27,10 +27,6 @@
 #include "fpmodule.inl"
 #include "softfloat.h"
 
-#ifdef CONFIG_FPE_NWFPE_XP
-extern flag floatx80_is_nan(floatx80);
-#endif
-
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);
 

arch/arm/nwfpe/softfloat.h

@@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 );
 char floatx80_lt_quiet( floatx80, floatx80 );
 char floatx80_is_signaling_nan( floatx80 );
 
+extern flag floatx80_is_nan(floatx80);
+
 #endif
 
 static inline flag extractFloat32Sign(float32 a)

arch/arm/plat-omap/fb.c

@@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void)
 			config_invalid = 1;
 			return;
 		}
-		if (rg.paddr)
+		if (rg.paddr) {
 			reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
-		reserved += rg.size;
+			reserved += rg.size;
+		}
 		omapfb_config.mem_desc.region[i] = rg;
 		configured_regions++;
 	}

arch/arm/plat-omap/gpio.c

@@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio)
 		return 0;
 	if (cpu_is_omap24xx() && gpio < 128)
 		return 0;
-	if (cpu_is_omap34xx() && gpio < 160)
+	if (cpu_is_omap34xx() && gpio < 192)
 		return 0;
 	return -1;
 }

arch/arm/plat-s3c/clock.c

@@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = {
 
 int s3c24xx_register_clock(struct clk *clk)
 {
-	clk->owner = THIS_MODULE;
-
 	if (clk->enable == NULL)
 		clk->enable = clk_null_enable;
 

arch/arm/plat-s3c24xx/dma.c

@@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
 
 EXPORT_SYMBOL(s3c2410_dma_getposition);
 
-static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
 {
 	return container_of(dev, struct s3c2410_dma_chan, dev);
 }

arch/arm/plat-s3c64xx/gpiolib.c

@@ -57,7 +57,7 @@
 #if 1
 #define gpio_dbg(x...) do { } while(0)
 #else
-#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
 #endif
 
 /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where

arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h

@@ -61,14 +61,14 @@
 #define S3C64XX_GPH7_ADDR_CF1		(0x06 << 28)
 #define S3C64XX_GPH7_EINT_G6_7		(0x07 << 28)
 
-#define S3C64XX_GPH8_MMC1_DATA6		(0x02 << 32)
-#define S3C64XX_GPH8_MMC2_DATA2		(0x03 << 32)
-#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 << 32)
-#define S3C64XX_GPH8_ADDR_CF2		(0x06 << 32)
-#define S3C64XX_GPH8_EINT_G6_8		(0x07 << 32)
-
-#define S3C64XX_GPH9_MMC1_DATA7		(0x02 << 36)
-#define S3C64XX_GPH9_MMC2_DATA3		(0x03 << 36)
-#define S3C64XX_GPH9_I2S_V40_DI		(0x05 << 36)
-#define S3C64XX_GPH9_EINT_G6_9		(0x07 << 36)
+#define S3C64XX_GPH8_MMC1_DATA6		(0x02 <<  0)
+#define S3C64XX_GPH8_MMC2_DATA2		(0x03 <<  0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK	(0x05 <<  0)
+#define S3C64XX_GPH8_ADDR_CF2		(0x06 <<  0)
+#define S3C64XX_GPH8_EINT_G6_8		(0x07 <<  0)
 
+#define S3C64XX_GPH9_OUTPUT		(0x01 <<  4)
+#define S3C64XX_GPH9_MMC1_DATA7		(0x02 <<  4)
+#define S3C64XX_GPH9_MMC2_DATA3		(0x03 <<  4)
+#define S3C64XX_GPH9_I2S_V40_DI		(0x05 <<  4)
+#define S3C64XX_GPH9_EINT_G6_9		(0x07 <<  4)

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Mar 23 20:09:01 2009
+# Last update: Fri May 29 10:14:20 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -916,7 +916,7 @@ nxdb500			MACH_NXDB500		NXDB500			905
 apf9328			MACH_APF9328		APF9328			906
 omap_wipoq		MACH_OMAP_WIPOQ		OMAP_WIPOQ		907
 omap_twip		MACH_OMAP_TWIP		OMAP_TWIP		908
-palmt650		MACH_PALMT650		PALMT650		909
+treo650			MACH_TREO650		TREO650			909
 acumen			MACH_ACUMEN		ACUMEN			910
 xp100			MACH_XP100		XP100			911
 fs2410			MACH_FS2410		FS2410			912
@@ -1232,7 +1232,7 @@ ql202b			MACH_QL202B		QL202B			1226
 vpac270			MACH_VPAC270		VPAC270			1227
 rd129			MACH_RD129		RD129			1228
 htcwizard		MACH_HTCWIZARD		HTCWIZARD		1229
-xscale_treo680		MACH_XSCALE_TREO680	XSCALE_TREO680		1230
+treo680			MACH_TREO680		TREO680			1230
 tecon_tmezon		MACH_TECON_TMEZON	TECON_TMEZON		1231
 zylonite		MACH_ZYLONITE		ZYLONITE		1233
 gene1270		MACH_GENE1270		GENE1270		1234
@@ -1418,10 +1418,10 @@ looxc550		MACH_LOOXC550		LOOXC550		1417
 cnty_titan		MACH_CNTY_TITAN		CNTY_TITAN		1418
 app3xx			MACH_APP3XX		APP3XX			1419
 sideoatsgrama		MACH_SIDEOATSGRAMA	SIDEOATSGRAMA		1420
-palmtreo700p		MACH_PALMTREO700P	PALMTREO700P		1421
-palmtreo700w		MACH_PALMTREO700W	PALMTREO700W		1422
-palmtreo750		MACH_PALMTREO750	PALMTREO750		1423
-palmtreo755p		MACH_PALMTREO755P	PALMTREO755P		1424
+treo700p		MACH_TREO700P		TREO700P		1421
+treo700w		MACH_TREO700W		TREO700W		1422
+treo750			MACH_TREO750		TREO750			1423
+treo755p		MACH_TREO755P		TREO755P		1424
 ezreganut9200		MACH_EZREGANUT9200	EZREGANUT9200		1425
 sarge			MACH_SARGE		SARGE			1426
 a696			MACH_A696		A696			1427
@@ -1721,7 +1721,7 @@ sapphire		MACH_SAPPHIRE		SAPPHIRE		1729
 csb637xo		MACH_CSB637XO		CSB637XO		1730
 evisiong		MACH_EVISIONG		EVISIONG		1731
 stmp37xx		MACH_STMP37XX		STMP37XX		1732
-stmp378x		MACH_STMP38XX		STMP38XX		1733
+stmp378x		MACH_STMP378X		STMP378X		1733
 tnt			MACH_TNT		TNT			1734
 tbxt			MACH_TBXT		TBXT			1735
 playmate		MACH_PLAYMATE		PLAYMATE		1736
@@ -1817,7 +1817,7 @@ smdkc100		MACH_SMDKC100		SMDKC100		1826
 tavorevb		MACH_TAVOREVB		TAVOREVB		1827
 saar			MACH_SAAR		SAAR			1828
 deister_eyecam		MACH_DEISTER_EYECAM	DEISTER_EYECAM		1829
-at91sam9m10ek		MACH_AT91SAM9M10EK	AT91SAM9M10EK		1830
+at91sam9m10g45ek	MACH_AT91SAM9M10G45EK	AT91SAM9M10G45EK	1830
 linkstation_produo	MACH_LINKSTATION_PRODUO	LINKSTATION_PRODUO	1831
 hit_b0			MACH_HIT_B0		HIT_B0			1832
 adx_rmu			MACH_ADX_RMU		ADX_RMU			1833
@@ -2132,3 +2132,116 @@ apollo			MACH_APOLLO		APOLLO			2141
 at91cap9stk		MACH_AT91CAP9STK	AT91CAP9STK		2142
 spc300			MACH_SPC300		SPC300			2143
 eko			MACH_EKO		EKO			2144
+ccw9m2443		MACH_CCW9M2443		CCW9M2443		2145
+ccw9m2443js		MACH_CCW9M2443JS	CCW9M2443JS		2146
+m2m_router_device	MACH_M2M_ROUTER_DEVICE	M2M_ROUTER_DEVICE	2147
+str9104nas		MACH_STAR9104NAS	STAR9104NAS		2148
+pca100			MACH_PCA100		PCA100			2149
+z3_dm365_mod_01		MACH_Z3_DM365_MOD_01	Z3_DM365_MOD_01		2150
+hipox			MACH_HIPOX		HIPOX			2151
+omap3_piteds		MACH_OMAP3_PITEDS	OMAP3_PITEDS		2152
+bm150r			MACH_BM150R		BM150R			2153
+tbone			MACH_TBONE		TBONE			2154
+merlin			MACH_MERLIN		MERLIN			2155
+falcon			MACH_FALCON		FALCON			2156
+davinci_da850_evm	MACH_DAVINCI_DA850_EVM	DAVINCI_DA850_EVM	2157
+s5p6440			MACH_S5P6440		S5P6440			2158
+at91sam9g10ek		MACH_AT91SAM9G10EK	AT91SAM9G10EK		2159
+omap_4430sdp		MACH_OMAP_4430SDP	OMAP_4430SDP		2160
+lpc313x			MACH_LPC313X		LPC313X			2161
+magx_zn5		MACH_MAGX_ZN5		MAGX_ZN5		2162
+magx_em30		MACH_MAGX_EM30		MAGX_EM30		2163
+magx_ve66		MACH_MAGX_VE66		MAGX_VE66		2164
+meesc			MACH_MEESC		MEESC			2165
+otc570			MACH_OTC570		OTC570			2166
+bcu2412			MACH_BCU2412		BCU2412			2167
+beacon			MACH_BEACON		BEACON			2168
+actia_tgw		MACH_ACTIA_TGW		ACTIA_TGW		2169
+e4430			MACH_E4430		E4430			2170
+ql300			MACH_QL300		QL300			2171
+btmavb101		MACH_BTMAVB101		BTMAVB101		2172
+btmawb101		MACH_BTMAWB101		BTMAWB101		2173
+sq201			MACH_SQ201		SQ201			2174
+quatro45xx		MACH_QUATRO45XX		QUATRO45XX		2175
+openpad			MACH_OPENPAD		OPENPAD			2176
+tx25			MACH_TX25		TX25			2177
+omap3_torpedo		MACH_OMAP3_TORPEDO	OMAP3_TORPEDO		2178
+htcraphael_k		MACH_HTCRAPHAEL_K	HTCRAPHAEL_K		2179
+lal43			MACH_LAL43		LAL43			2181
+htcraphael_cdma500	MACH_HTCRAPHAEL_CDMA500	HTCRAPHAEL_CDMA500	2182
+anw6410			MACH_ANW6410		ANW6410			2183
+htcprophet		MACH_HTCPROPHET		HTCPROPHET		2185
+cfa_10022		MACH_CFA_10022		CFA_10022		2186
+imx27_visstrim_m10	MACH_IMX27_VISSTRIM_M10	IMX27_VISSTRIM_M10	2187
+px2imx27		MACH_PX2IMX27		PX2IMX27		2188
+stm3210e_eval		MACH_STM3210E_EVAL	STM3210E_EVAL		2189
+dvs10			MACH_DVS10		DVS10			2190
+portuxg20		MACH_PORTUXG20		PORTUXG20		2191
+arm_spv			MACH_ARM_SPV		ARM_SPV			2192
+smdkc110		MACH_SMDKC110		SMDKC110		2193
+cabespresso		MACH_CABESPRESSO	CABESPRESSO		2194
+hmc800			MACH_HMC800		HMC800			2195
+sholes			MACH_SHOLES		SHOLES			2196
+btmxc31			MACH_BTMXC31		BTMXC31			2197
+dt501			MACH_DT501		DT501			2198
+ktx			MACH_KTX		KTX			2199
+omap3517evm		MACH_OMAP3517EVM	OMAP3517EVM		2200
+netspace_v2		MACH_NETSPACE_V2	NETSPACE_V2		2201
+netspace_max_v2		MACH_NETSPACE_MAX_V2	NETSPACE_MAX_V2		2202
+d2net_v2		MACH_D2NET_V2		D2NET_V2		2203
+net2big_v2		MACH_NET2BIG_V2		NET2BIG_V2		2204
+net4big_v2		MACH_NET4BIG_V2		NET4BIG_V2		2205
+net5big_v2		MACH_NET5BIG_V2		NET5BIG_V2		2206
+endb2443		MACH_ENDB2443		ENDB2443		2207
+inetspace_v2		MACH_INETSPACE_V2	INETSPACE_V2		2208
+tros			MACH_TROS		TROS			2209
+pelco_homer		MACH_PELCO_HOMER	PELCO_HOMER		2210
+ofsp8			MACH_OFSP8		OFSP8			2211
+at91sam9g45ekes		MACH_AT91SAM9G45EKES	AT91SAM9G45EKES		2212
+guf_cupid		MACH_GUF_CUPID		GUF_CUPID		2213
+eab1r			MACH_EAB1R		EAB1R			2214
+desirec			MACH_DESIREC		DESIREC			2215
+cordoba			MACH_CORDOBA		CORDOBA			2216
+irvine			MACH_IRVINE		IRVINE			2217
+sff772			MACH_SFF772		SFF772			2218
+pelco_milano		MACH_PELCO_MILANO	PELCO_MILANO		2219
+pc7302			MACH_PC7302		PC7302			2220
+bip6000			MACH_BIP6000		BIP6000			2221
+silvermoon		MACH_SILVERMOON		SILVERMOON		2222
+vc0830			MACH_VC0830		VC0830			2223
+dt430			MACH_DT430		DT430			2224
+ji42pf			MACH_JI42PF		JI42PF			2225
+gnet_ksm		MACH_GNET_KSM		GNET_KSM		2226
+gnet_sgm		MACH_GNET_SGM		GNET_SGM		2227
+gnet_sgr		MACH_GNET_SGR		GNET_SGR		2228
+omap3_icetekevm		MACH_OMAP3_ICETEKEVM	OMAP3_ICETEKEVM		2229
+pnp			MACH_PNP		PNP			2230
+ctera_2bay_k		MACH_CTERA_2BAY_K	CTERA_2BAY_K		2231
+ctera_2bay_u		MACH_CTERA_2BAY_U	CTERA_2BAY_U		2232
+sas_c			MACH_SAS_C		SAS_C			2233
+vma2315			MACH_VMA2315		VMA2315			2234
+vcs			MACH_VCS		VCS			2235
+spear600		MACH_SPEAR600		SPEAR600		2236
+spear300		MACH_SPEAR300		SPEAR300		2237
+spear1300		MACH_SPEAR1300		SPEAR1300		2238
+lilly1131		MACH_LILLY1131		LILLY1131		2239
+arvoo_ax301		MACH_ARVOO_AX301	ARVOO_AX301		2240
+mapphone		MACH_MAPPHONE		MAPPHONE		2241
+legend			MACH_LEGEND		LEGEND			2242
+salsa			MACH_SALSA		SALSA			2243
+lounge			MACH_LOUNGE		LOUNGE			2244
+vision			MACH_VISION		VISION			2245
+vmb20			MACH_VMB20		VMB20			2246
+hy2410			MACH_HY2410		HY2410			2247
+hy9315			MACH_HY9315		HY9315			2248
+bullwinkle		MACH_BULLWINKLE		BULLWINKLE		2249
+arm_ultimator2		MACH_ARM_ULTIMATOR2	ARM_ULTIMATOR2		2250
+vs_v210			MACH_VS_V210		VS_V210			2252
+vs_v212			MACH_VS_V212		VS_V212			2253
+hmt			MACH_HMT		HMT			2254
+suen3			MACH_SUEN3		SUEN3			2255
+vesper			MACH_VESPER		VESPER			2256
+str9			MACH_STR9		STR9			2257
+omap3_wl_ff		MACH_OMAP3_WL_FF	OMAP3_WL_FF		2258
+simcom			MACH_SIMCOM		SIMCOM			2259
+mcwebio			MACH_MCWEBIO		MCWEBIO			2260

arch/blackfin/include/asm/.gitignore

@@ -1 +0,0 @@
-+mach

arch/blackfin/include/asm/flat.h

@@ -10,7 +10,6 @@
 
 #include <asm/unaligned.h>
 
-#define	flat_stack_align(sp)	/* nothing needed */
 #define	flat_argvp_envp_on_stack()		0
 #define	flat_old_ram_flag(flags)		(flags)
 

arch/blackfin/include/asm/unistd.h

@@ -378,8 +378,10 @@
 #define __NR_dup3		363
 #define __NR_pipe2		364
 #define __NR_inotify_init1	365
+#define __NR_preadv		366
+#define __NR_pwritev		367
 
-#define __NR_syscall		366
+#define __NR_syscall		368
 #define NR_syscalls		__NR_syscall
 
 /* Old optional stuff no one actually uses */

arch/blackfin/kernel/.gitignore

@@ -0,0 +1 @@
+vmlinux.lds

arch/blackfin/lib/strncmp.c

@@ -8,9 +8,8 @@
 
 #define strncmp __inline_strncmp
 #include <asm/string.h>
-#undef strncmp
-
 #include <linux/module.h>
+#undef strncmp
 
 int strncmp(const char *cs, const char *ct, size_t count)
 {

arch/blackfin/mach-common/entry.S

@@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table)
 	.long _sys_dup3
 	.long _sys_pipe2
 	.long _sys_inotify_init1	/* 365 */
+	.long _sys_preadv
+	.long _sys_pwritev
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall

arch/cris/Makefile

@@ -70,7 +70,7 @@ SRC_ARCH              = $(srctree)/arch/cris
 # cris object files path
 OBJ_ARCH              = $(objtree)/arch/cris
 
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
 MACHINE := arch/cris/$(SARCH)
 
 all: zImage
@@ -81,15 +81,15 @@ zImage Image: vmlinux
 archprepare:
 
 archclean:
-	$(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
-		$(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+	$(Q)if [ -e arch/cris/boot ]; then \
+		$(MAKE) $(clean)=arch/cris/boot; \
 	fi
 
 CLEAN_FILES += \
-	$(MACHINE)/boot/zImage \
-	$(MACHINE)/boot/compressed/decompress.bin \
-	$(MACHINE)/boot/compressed/piggy.gz \
-	$(MACHINE)/boot/rescue/rescue.bin
+	$(boot)/zImage \
+	$(boot)/compressed/decompress.bin \
+	$(boot)/compressed/piggy.gz \
+	$(boot)/rescue/rescue.bin
 
 
 # MRPROPER_FILES +=

arch/cris/arch-v10/boot/Makefile

@@ -1,20 +0,0 @@
-#
-# arch/cris/arch-v10/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage:  $(obj)/compressed/vmlinux
-	@cp $< $@
-	@echo '  Kernel: $@ is ready'

arch/cris/arch-v10/boot/compressed/README

@@ -1,25 +0,0 @@
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and 
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img. 
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn

arch/cris/arch-v10/boot/compressed/misc.c

@@ -1,246 +0,0 @@
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n)     memset((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-unsigned inptr = 0;	/* index of next byte to be processed in inbuf
-			 * After decompression it will contain the
-			 * compressed size, and head.S will read it.
-			 */
-
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond, msg) do { \
-		if (!(cond)) \
-			error(msg); \
-	} while (0)
-#  define Trace(x) fprintf x
-#  define Tracev(x) do { \
-		if (verbose) \
-			fprintf x; \
-	} while (0)
-#  define Tracevv(x) do { \
-		if (verbose > 1) \
-			fprintf x; \
-	} while (0)
-#  define Tracec(c, x) do { \
-		if (verbose && (c)) \
-			fprintf x; \
-	} while (0)
-#  define Tracecv(c, x) do { \
-		if (verbose > 1 && (c)) \
-			fprintf x; \
-	} while (0)
-#else
-#  define Assert(cond, msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c, x)
-#  define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data;  /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-		while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
-		*R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-		while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
-		*R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-		while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
-		*R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-		while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
-		*R_SERIAL3_TR_DATA = *s++;
-#endif
-	}
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *)s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-
-	return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-
-	return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out = *in;
-		out++;
-		in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted\n");
-
-	while (1);	/* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
-	output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
-	char revision;
-
-	/* input_data is set in head.S */
-	inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-	*R_SERIAL0_XOFF = 0;
-	*R_SERIAL0_BAUD = 0x99;
-	*R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-	*R_SERIAL1_XOFF = 0;
-	*R_SERIAL1_BAUD = 0x99;
-	*R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-	*R_GEN_CONFIG = 0x08;
-	*R_SERIAL2_XOFF = 0;
-	*R_SERIAL2_BAUD = 0x99;
-	*R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-	*R_GEN_CONFIG = 0x100;
-	*R_SERIAL3_XOFF = 0;
-	*R_SERIAL3_BAUD = 0x99;
-	*R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
-	setup_normal_output_buffer();
-
-	makecrc();
-
-	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 10) {
-		puts("You need an ETRAX 100LX to run linux 2.6\n");
-		while (1);
-	}
-
-	puts("Uncompressing Linux...\n");
-	gunzip();
-	puts("Done. Now booting the kernel.\n");
-}

arch/cris/arch-v10/kernel/entry.S

@@ -536,10 +536,10 @@ multiple_interrupt:
 	movem	$r13, [$sp]
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
-	
+
 	move.d  $sp, $r10
 	jsr	do_multiple_IRQ
-	
+
 	jump    ret_from_intr
 
 do_sigtrap:
@@ -585,7 +585,7 @@ _ugdb_handle_breakpoint:
 	pop	$r0			; Restore r0. 
 	ba	do_sigtrap		; SIGTRAP the offending process. 
 	pop	$dccr			; Restore dccr in delay slot.
-	
+
 	.global kernel_execve
 kernel_execve:
 	move.d __NR_execve, $r9
@@ -929,6 +929,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/arch-v32/boot/compressed/Makefile

@@ -1,26 +0,0 @@
-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD   $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
-	$(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
-	$(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)

arch/cris/arch-v32/boot/rescue/Makefile

@@ -1,26 +0,0 @@
-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
-		-I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD      $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
-	$(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-	$(call if_changed,objcopy)
-	cp -p $(obj)/rescue.bin $(objtree)

arch/cris/arch-v32/drivers/mach-a3/gpio.c

@@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) |
 			(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CLRBITS:
 		spin_lock_irqsave(&gpio_lock, flags);
@@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) &
 			~(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_HIGHALARM:
 		/* Set alarm when bits with 1 in arg go high. */

arch/cris/arch-v32/kernel/Makefile

@@ -9,8 +9,6 @@ obj-y   := entry.o traps.o irq.o debugport.o \
 	   process.o ptrace.o setup.o signal.o traps.o time.o \
 	   cache.o cacheflush.o
 
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
 obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o

arch/cris/arch-v32/kernel/entry.S

@@ -852,6 +852,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime       /* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/arch-v32/boot/Makefile → arch/cris/boot/Makefile

@@ -1,8 +1,12 @@
 #
-# arch/cris/arch-v32/boot/Makefile
+# arch/cris/boot/Makefile
 #
 
-OBJCOPYFLAGS = -O binary -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+
+OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
 
 subdir- := compressed rescue
 targets := Image

arch/cris/arch-v10/boot/compressed/Makefile → arch/cris/boot/compressed/Makefile

@@ -1,11 +1,23 @@
 #
-# arch/cris/arch-v10/boot/compressed/Makefile
+# arch/cris/boot/compressed/Makefile
 #
 
 asflags-y += $(LINUXINCLUDE)
 ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
+# 				    -I$(srctree)/include/asm/arch
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
+# 					-I$(srctree)/include/asm/arch
+
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+
+OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS= $(OBJECTS-y) $(obj)/misc.o
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
@@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
 
 $(obj)/piggy.gz: $(obj)/../Image FORCE
 	$(call if_changed,gzip)
-

arch/cris/arch-v10/boot/compressed/head.S → arch/cris/boot/compressed/head_v10.S

@@ -30,7 +30,7 @@
 	beq	dram_init_finished
 	nop
 
-#include "../../lib/dram_init.S"
+#include "../../arch-v10/lib/dram_init.S"
 
 dram_init_finished:
 
@@ -123,4 +123,4 @@ _cmd_line_magic:
 	.dword 0
 _cmd_line_addr:
 	.dword 0
-#include "../../lib/hw_settings.S"
+#include "../../arch-v10/lib/hw_settings.S"

arch/cris/arch-v32/boot/compressed/head.S → arch/cris/boot/compressed/head_v32.S

@@ -17,7 +17,7 @@
 	.globl	input_data
 
 	.text
-_start:
+start:
 	di
 
 	;; Start clocks for used blocks.
@@ -29,9 +29,9 @@ _start:
 	nop
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
+#include "../../arch-v32/mach-fs/dram_init.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
+#include "../../arch-v32/mach-a3/dram_init.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif
@@ -137,9 +137,9 @@ _boot_source:
 	.dword 0
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
+#include "../../arch-v32/mach-fs/hw_settings.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
+#include "../../arch-v32/mach-a3/hw_settings.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif

arch/cris/arch-v32/boot/compressed/misc.c → arch/cris/boot/compressed/misc.c

@@ -18,8 +18,9 @@
 
 #define KERNEL_LOAD_ADR 0x40004000
 
-
 #include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/reg_map.h>
 #include <hwregs/ser_defs.h>
@@ -27,6 +28,9 @@
 #ifdef CONFIG_CRIS_MACH_ARTPEC3
 #include <hwregs/clkgen_defs.h>
 #endif
+#else
+#include <arch/svinto.h>
+#endif
 
 /*
  * gzip declarations
@@ -35,12 +39,10 @@
 #define OF(args)  args
 #define STATIC static
 
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-	     size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
 
+#define memzero(s, n)     memset((s), 0, (n))
 
 typedef unsigned char  uch;
 typedef unsigned short ush;
@@ -68,27 +70,43 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 
-#define get_byte() inbuf[inptr++]
+#define get_byte() (inbuf[inptr++])
 
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
 #  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
 static void flush_window(void);
 static void error(char *m);
+static void puts(const char *);
 
 extern char *input_data;  /* lives in head.S */
 
@@ -96,10 +114,6 @@ static long bytes_out;
 static uch *output_data;
 static unsigned long output_ptr;
 
-static void error(char *m);
-
-static void puts(const char *);
-
 /* the "heap" is put directly after the BSS ends, at end */
 
 extern int _end;
@@ -110,8 +124,8 @@ static long free_mem_end_ptr;
 
 /* decompressor info and error messages to serial console */
 
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
 {
 	reg_ser_rs_stat_din rs;
 	reg_ser_rw_dout dout = {.data = *s};
@@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser)
 
 	REG_WR(ser, regi_ser, rw_dout, dout);
 }
+#endif
 
-static void
-puts(const char *s)
+static void puts(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
 	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser0);
+#else
+		while (!(*R_SERIAL0_STATUS & (1 << 5)))
+			;
+		*R_SERIAL0_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser1);
+#else
+		while (!(*R_SERIAL1_STATUS & (1 << 5)))
+			;
+		*R_SERIAL1_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser2);
+#else
+		while (!(*R_SERIAL2_STATUS & (1 << 5)))
+			;
+		*R_SERIAL2_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser3);
+#else
+		while (!(*R_SERIAL3_STATUS & (1 << 5)))
+			;
+		*R_SERIAL3_TR_DATA = *s++;
+#endif
 #endif
 		*s++;
 	}
@@ -147,8 +185,7 @@ puts(const char *s)
 #endif
 }
 
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
 	int i;
 	char *ss = (char*)s;
@@ -158,14 +195,13 @@ memset(void* s, int c, size_t n)
 	return s;
 }
 
-void*
-memcpy(void* __dest, __const void* __src,
-			    size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i;
 	char *d = (char *)__dest, *s = (char *)__src;
 
-	for (i=0;i<__n;i++) d[i] = s[i];
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
 
 	return __dest;
 }
@@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src,
  * (Used for the decompressed data only.)
  */
 
-static void
-flush_window()
+static void flush_window(void)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
 }
 
-static void
-error(char *x)
+static void error(char *x)
 {
-	puts("\r\n\n");
+	puts("\n\n");
 	puts(x);
-	puts("\r\n\n -- System halted\n");
+	puts("\n\n -- System halted\n");
 
 	while(1);	/* Halt */
 }
 
-void
-setup_normal_output_buffer(void)
+void setup_normal_output_buffer(void)
 {
 	output_data = (char *)KERNEL_LOAD_ADR;
 }
 
-static inline void
-serial_setup(reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
 {
 	reg_ser_rw_xoff xoff;
 	reg_ser_rw_tr_ctrl tr_ctrl;
@@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser)
 	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
 	REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
 }
+#endif
 
-void
-decompress_kernel(void)
+void decompress_kernel(void)
 {
 	char revision;
+	char compile_rev;
 
+#ifdef CONFIG_ETRAX_ARCH_V32
+	/* Need at least a CRISv32 to run. */
+	compile_rev = 32;
 #if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
     defined(CONFIG_ETRAX_DEBUG_PORT2) || \
     defined(CONFIG_ETRAX_DEBUG_PORT3)
@@ -277,6 +316,7 @@ decompress_kernel(void)
 	hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
 #endif
 
+
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
 	serial_setup(regi_ser0);
 #endif
@@ -300,19 +340,52 @@ decompress_kernel(void)
 
 	/* input_data is set in head.S */
 	inbuf = input_data;
+#else /* CRISv10 */
+	/* Need at least a crisv10 to run. */
+	compile_rev = 10;
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	*R_SERIAL0_XOFF = 0;
+	*R_SERIAL0_BAUD = 0x99;
+	*R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	*R_SERIAL1_XOFF = 0;
+	*R_SERIAL1_BAUD = 0x99;
+	*R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	*R_GEN_CONFIG = 0x08;
+	*R_SERIAL2_XOFF = 0;
+	*R_SERIAL2_BAUD = 0x99;
+	*R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	*R_GEN_CONFIG = 0x100;
+	*R_SERIAL3_XOFF = 0;
+	*R_SERIAL3_BAUD = 0x99;
+	*R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
 
 	setup_normal_output_buffer();
 
 	makecrc();
 
 	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 32)
-	{
-		puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
+	if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+		puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+		puts("You need an ETRAX 100LX to run linux 2.6\n");
+#endif
 		while(1);
 	}
 
-	puts("Uncompressing Linux...\r\n");
+	puts("Uncompressing Linux...\n");
 	gunzip();
-	puts("Done. Now booting the kernel.\r\n");
+	puts("Done. Now booting the kernel\n");
 }