|
@@ -25,17 +25,12 @@ Required properties:
|
|
|
tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
|
|
|
ldo6, ldo7, ldo8
|
|
|
|
|
|
-Optional properties:
|
|
|
-- ti,vmbch-threshold: (tps65911) main battery charged threshold
|
|
|
- comparator. (see VMBCH_VSEL in TPS65910 datasheet)
|
|
|
-- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
|
|
|
- comparator. (see VMBCH_VSEL in TPS65910 datasheet)
|
|
|
-- ti,en-gpio-sleep: enable sleep control for gpios
|
|
|
- There should be 9 entries here, one for each gpio.
|
|
|
- xxx-supply: Input voltage supply regulator.
|
|
|
- Missing of these properties will be assume as there is no supply regulator
|
|
|
- for that input pins and always powered on.
|
|
|
- The valid input supply properties are:
|
|
|
+ These entries are require if regulators are enabled for a device. Missing of these
|
|
|
+ properties can cause the regulator registration fails.
|
|
|
+ If some of input supply is powered through battery or always-on supply then
|
|
|
+ also it is require to have these parameters with proper node handle of always
|
|
|
+ on power supply.
|
|
|
tps65910:
|
|
|
vcc1-supply: VDD1 input.
|
|
|
vcc2-supply: VDD2 input.
|
|
@@ -55,6 +50,16 @@ Optional properties:
|
|
|
vcc7-supply: VRTC input.
|
|
|
vccio-supply: VIO input.
|
|
|
|
|
|
+Optional properties:
|
|
|
+- ti,vmbch-threshold: (tps65911) main battery charged threshold
|
|
|
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
|
|
|
+- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
|
|
|
+ comparator. (see VMBCH_VSEL in TPS65910 datasheet)
|
|
|
+- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
|
|
|
+ in TPS6591X datasheet)
|
|
|
+- ti,en-gpio-sleep: enable sleep control for gpios
|
|
|
+ There should be 9 entries here, one for each gpio.
|
|
|
+
|
|
|
Regulator Optional properties:
|
|
|
- ti,regulator-ext-sleep-control: enable external sleep
|
|
|
control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
|
|
@@ -79,8 +84,14 @@ Example:
|
|
|
|
|
|
ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
|
|
|
|
|
|
- vcc7-supply = <®_parent>;
|
|
|
vcc1-supply = <®_parent>;
|
|
|
+ vcc2-supply = <&some_reg>;
|
|
|
+ vcc3-supply = <...>;
|
|
|
+ vcc4-supply = <...>;
|
|
|
+ vcc5-supply = <...>;
|
|
|
+ vcc6-supply = <...>;
|
|
|
+ vcc7-supply = <...>;
|
|
|
+ vccio-supply = <...>;
|
|
|
|
|
|
regulators {
|
|
|
#address-cells = <1>;
|