|
@@ -61,8 +61,8 @@
|
|
|
*
|
|
|
* DO NOT REUSE THESE IDs with any other driver!! Ever!!
|
|
|
* Instead: allocate your own, using normal USB-IF procedures. */
|
|
|
-#define FSG_VENDOR_ID 0x0525 // NetChip
|
|
|
-#define FSG_PRODUCT_ID 0xa4a5 // Linux-USB File-backed Storage Gadget
|
|
|
+#define FSG_VENDOR_ID 0x0525 /* NetChip */
|
|
|
+#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */
|
|
|
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
@@ -103,7 +103,7 @@
|
|
|
#ifdef DUMP_MSGS
|
|
|
|
|
|
# define dump_msg(fsg, /* const char * */ label, \
|
|
|
- /* const u8 * */ buf, /* unsigned */ length) do { \
|
|
|
+ /* const u8 * */ buf, /* unsigned */ length) do { \
|
|
|
if (length < 512) { \
|
|
|
DBG(fsg, "%s, length %u:\n", label, length); \
|
|
|
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \
|
|
@@ -116,11 +116,11 @@
|
|
|
#else
|
|
|
|
|
|
# define dump_msg(fsg, /* const char * */ label, \
|
|
|
- /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
|
|
|
+ /* const u8 * */ buf, /* unsigned */ length) do { } while (0)
|
|
|
|
|
|
# ifdef VERBOSE_DEBUG
|
|
|
|
|
|
-#define dump_cdb(fsg) \
|
|
|
+# define dump_cdb(fsg) \
|
|
|
print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \
|
|
|
16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \
|
|
|
|
|
@@ -143,45 +143,45 @@
|
|
|
#define TYPE_CDROM 0x05
|
|
|
|
|
|
/* USB protocol value = the transport method */
|
|
|
-#define USB_PR_CBI 0x00 // Control/Bulk/Interrupt
|
|
|
-#define USB_PR_CB 0x01 // Control/Bulk w/o interrupt
|
|
|
-#define USB_PR_BULK 0x50 // Bulk-only
|
|
|
+#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */
|
|
|
+#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */
|
|
|
+#define USB_PR_BULK 0x50 /* Bulk-only */
|
|
|
|
|
|
/* USB subclass value = the protocol encapsulation */
|
|
|
-#define USB_SC_RBC 0x01 // Reduced Block Commands (flash)
|
|
|
-#define USB_SC_8020 0x02 // SFF-8020i, MMC-2, ATAPI (CD-ROM)
|
|
|
-#define USB_SC_QIC 0x03 // QIC-157 (tape)
|
|
|
-#define USB_SC_UFI 0x04 // UFI (floppy)
|
|
|
-#define USB_SC_8070 0x05 // SFF-8070i (removable)
|
|
|
-#define USB_SC_SCSI 0x06 // Transparent SCSI
|
|
|
+#define USB_SC_RBC 0x01 /* Reduced Block Commands (flash) */
|
|
|
+#define USB_SC_8020 0x02 /* SFF-8020i, MMC-2, ATAPI (CD-ROM) */
|
|
|
+#define USB_SC_QIC 0x03 /* QIC-157 (tape) */
|
|
|
+#define USB_SC_UFI 0x04 /* UFI (floppy) */
|
|
|
+#define USB_SC_8070 0x05 /* SFF-8070i (removable) */
|
|
|
+#define USB_SC_SCSI 0x06 /* Transparent SCSI */
|
|
|
|
|
|
/* Bulk-only data structures */
|
|
|
|
|
|
/* Command Block Wrapper */
|
|
|
struct fsg_bulk_cb_wrap {
|
|
|
- __le32 Signature; // Contains 'USBC'
|
|
|
- u32 Tag; // Unique per command id
|
|
|
- __le32 DataTransferLength; // Size of the data
|
|
|
- u8 Flags; // Direction in bit 7
|
|
|
- u8 Lun; // LUN (normally 0)
|
|
|
- u8 Length; // Of the CDB, <= MAX_COMMAND_SIZE
|
|
|
- u8 CDB[16]; // Command Data Block
|
|
|
+ __le32 Signature; /* Contains 'USBC' */
|
|
|
+ u32 Tag; /* Unique per command id */
|
|
|
+ __le32 DataTransferLength; /* Size of the data */
|
|
|
+ u8 Flags; /* Direction in bit 7 */
|
|
|
+ u8 Lun; /* LUN (normally 0) */
|
|
|
+ u8 Length; /* Of the CDB, <= MAX_COMMAND_SIZE */
|
|
|
+ u8 CDB[16]; /* Command Data Block */
|
|
|
};
|
|
|
|
|
|
#define USB_BULK_CB_WRAP_LEN 31
|
|
|
-#define USB_BULK_CB_SIG 0x43425355 // Spells out USBC
|
|
|
+#define USB_BULK_CB_SIG 0x43425355 /* Spells out USBC */
|
|
|
#define USB_BULK_IN_FLAG 0x80
|
|
|
|
|
|
/* Command Status Wrapper */
|
|
|
struct bulk_cs_wrap {
|
|
|
- __le32 Signature; // Should = 'USBS'
|
|
|
- u32 Tag; // Same as original command
|
|
|
- __le32 Residue; // Amount not transferred
|
|
|
- u8 Status; // See below
|
|
|
+ __le32 Signature; /* Should = 'USBS' */
|
|
|
+ u32 Tag; /* Same as original command */
|
|
|
+ __le32 Residue; /* Amount not transferred */
|
|
|
+ u8 Status; /* See below */
|
|
|
};
|
|
|
|
|
|
#define USB_BULK_CS_WRAP_LEN 13
|
|
|
-#define USB_BULK_CS_SIG 0x53425355 // Spells out 'USBS'
|
|
|
+#define USB_BULK_CS_SIG 0x53425355 /* Spells out 'USBS' */
|
|
|
#define USB_STATUS_PASS 0
|
|
|
#define USB_STATUS_FAIL 1
|
|
|
#define USB_STATUS_PHASE_ERROR 2
|
|
@@ -203,7 +203,8 @@ struct interrupt_data {
|
|
|
#define USB_CBI_ADSC_REQUEST 0x00
|
|
|
|
|
|
|
|
|
-#define MAX_COMMAND_SIZE 16 // Length of a SCSI Command Data Block
|
|
|
+/* Length of a SCSI Command Data Block */
|
|
|
+#define MAX_COMMAND_SIZE 16
|
|
|
|
|
|
/* SCSI commands that we recognize */
|
|
|
#define SC_FORMAT_UNIT 0x04
|
|
@@ -248,7 +249,7 @@ struct interrupt_data {
|
|
|
#define SS_WRITE_ERROR 0x030c02
|
|
|
#define SS_WRITE_PROTECTED 0x072700
|
|
|
|
|
|
-#define SK(x) ((u8) ((x) >> 16)) // Sense Key byte, etc.
|
|
|
+#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */
|
|
|
#define ASC(x) ((u8) ((x) >> 8))
|
|
|
#define ASCQ(x) ((u8) (x))
|
|
|
|
|
@@ -261,13 +262,13 @@ struct fsg_lun {
|
|
|
loff_t file_length;
|
|
|
loff_t num_sectors;
|
|
|
|
|
|
- unsigned int initially_ro : 1;
|
|
|
- unsigned int ro : 1;
|
|
|
- unsigned int removable : 1;
|
|
|
- unsigned int cdrom : 1;
|
|
|
- unsigned int prevent_medium_removal : 1;
|
|
|
- unsigned int registered : 1;
|
|
|
- unsigned int info_valid : 1;
|
|
|
+ unsigned int initially_ro:1;
|
|
|
+ unsigned int ro:1;
|
|
|
+ unsigned int removable:1;
|
|
|
+ unsigned int cdrom:1;
|
|
|
+ unsigned int prevent_medium_removal:1;
|
|
|
+ unsigned int registered:1;
|
|
|
+ unsigned int info_valid:1;
|
|
|
|
|
|
u32 sense_data;
|
|
|
u32 sense_data_info;
|
|
@@ -286,7 +287,7 @@ static struct fsg_lun *fsg_lun_from_dev(struct device *dev)
|
|
|
|
|
|
/* Big enough to hold our biggest descriptor */
|
|
|
#define EP0_BUFSIZE 256
|
|
|
-#define DELAYED_STATUS (EP0_BUFSIZE + 999) // An impossibly large value
|
|
|
+#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */
|
|
|
|
|
|
/* Number of buffers we will use. 2 is enough for double-buffering */
|
|
|
#define FSG_NUM_BUFFERS 2
|
|
@@ -324,7 +325,8 @@ struct fsg_buffhd {
|
|
|
};
|
|
|
|
|
|
enum fsg_state {
|
|
|
- FSG_STATE_COMMAND_PHASE = -10, // This one isn't used anywhere
|
|
|
+ /* This one isn't used anywhere */
|
|
|
+ FSG_STATE_COMMAND_PHASE = -10,
|
|
|
FSG_STATE_DATA_PHASE,
|
|
|
FSG_STATE_STATUS_PHASE,
|
|
|
|
|
@@ -386,10 +388,10 @@ fsg_intf_desc = {
|
|
|
.bLength = sizeof fsg_intf_desc,
|
|
|
.bDescriptorType = USB_DT_INTERFACE,
|
|
|
|
|
|
- .bNumEndpoints = 2, // Adjusted during fsg_bind()
|
|
|
+ .bNumEndpoints = 2, /* Adjusted during fsg_bind() */
|
|
|
.bInterfaceClass = USB_CLASS_MASS_STORAGE,
|
|
|
- .bInterfaceSubClass = USB_SC_SCSI, // Adjusted during fsg_bind()
|
|
|
- .bInterfaceProtocol = USB_PR_BULK, // Adjusted during fsg_bind()
|
|
|
+ .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */
|
|
|
+ .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */
|
|
|
.iInterface = FSG_STRING_INTERFACE,
|
|
|
};
|
|
|
|
|
@@ -426,7 +428,7 @@ fsg_fs_intr_in_desc = {
|
|
|
.bEndpointAddress = USB_DIR_IN,
|
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
|
.wMaxPacketSize = cpu_to_le16(2),
|
|
|
- .bInterval = 32, // frames -> 32 ms
|
|
|
+ .bInterval = 32, /* frames -> 32 ms */
|
|
|
};
|
|
|
|
|
|
#ifndef FSG_NO_OTG
|
|
@@ -477,7 +479,7 @@ fsg_hs_bulk_out_desc = {
|
|
|
/* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
|
|
|
.bmAttributes = USB_ENDPOINT_XFER_BULK,
|
|
|
.wMaxPacketSize = cpu_to_le16(512),
|
|
|
- .bInterval = 1, // NAK every 1 uframe
|
|
|
+ .bInterval = 1, /* NAK every 1 uframe */
|
|
|
};
|
|
|
|
|
|
#ifndef FSG_NO_INTR_EP
|
|
@@ -490,7 +492,7 @@ fsg_hs_intr_in_desc = {
|
|
|
/* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
|
|
|
.bmAttributes = USB_ENDPOINT_XFER_INT,
|
|
|
.wMaxPacketSize = cpu_to_le16(2),
|
|
|
- .bInterval = 9, // 2**(9-1) = 256 uframes -> 32 ms
|
|
|
+ .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */
|
|
|
};
|
|
|
|
|
|
#ifndef FSG_NO_OTG
|
|
@@ -538,7 +540,7 @@ static struct usb_string fsg_strings[] = {
|
|
|
};
|
|
|
|
|
|
static struct usb_gadget_strings fsg_stringtab = {
|
|
|
- .language = 0x0409, // en-us
|
|
|
+ .language = 0x0409, /* en-us */
|
|
|
.strings = fsg_strings,
|
|
|
};
|
|
|
|
|
@@ -600,11 +602,11 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
|
|
|
rc = (int) size;
|
|
|
goto out;
|
|
|
}
|
|
|
- num_sectors = size >> 9; // File size in 512-byte blocks
|
|
|
+ num_sectors = size >> 9; /* File size in 512-byte blocks */
|
|
|
min_sectors = 1;
|
|
|
if (curlun->cdrom) {
|
|
|
- num_sectors &= ~3; // Reduce to a multiple of 2048
|
|
|
- min_sectors = 300*4; // Smallest track is 300 frames
|
|
|
+ num_sectors &= ~3; /* Reduce to a multiple of 2048 */
|
|
|
+ min_sectors = 300*4; /* Smallest track is 300 frames */
|
|
|
if (num_sectors >= 256*60*75*4) {
|
|
|
num_sectors = (256*60*75 - 1) * 4;
|
|
|
LINFO(curlun, "file too big: %s\n", filename);
|
|
@@ -696,17 +698,17 @@ static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr,
|
|
|
ssize_t rc;
|
|
|
|
|
|
down_read(filesem);
|
|
|
- if (fsg_lun_is_open(curlun)) { // Get the complete pathname
|
|
|
+ if (fsg_lun_is_open(curlun)) { /* Get the complete pathname */
|
|
|
p = d_path(&curlun->filp->f_path, buf, PAGE_SIZE - 1);
|
|
|
if (IS_ERR(p))
|
|
|
rc = PTR_ERR(p);
|
|
|
else {
|
|
|
rc = strlen(p);
|
|
|
memmove(buf, p, rc);
|
|
|
- buf[rc] = '\n'; // Add a newline
|
|
|
+ buf[rc] = '\n'; /* Add a newline */
|
|
|
buf[++rc] = 0;
|
|
|
}
|
|
|
- } else { // No file, return 0 bytes
|
|
|
+ } else { /* No file, return 0 bytes */
|
|
|
*buf = 0;
|
|
|
rc = 0;
|
|
|
}
|
|
@@ -750,12 +752,12 @@ static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr,
|
|
|
|
|
|
if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) {
|
|
|
LDBG(curlun, "eject attempt prevented\n");
|
|
|
- return -EBUSY; // "Door is locked"
|
|
|
+ return -EBUSY; /* "Door is locked" */
|
|
|
}
|
|
|
|
|
|
/* Remove a trailing newline */
|
|
|
if (count > 0 && buf[count-1] == '\n')
|
|
|
- ((char *) buf)[count-1] = 0; // Ugh!
|
|
|
+ ((char *) buf)[count-1] = 0; /* Ugh! */
|
|
|
|
|
|
/* Eject current medium */
|
|
|
down_write(filesem);
|